[u/mrichter/AliRoot.git] / EMCAL / AliEMCALPreprocessor.cxx

/**************************************************************************
 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
 *                                                                        *
 * Author: The ALICE Off-line Project.                                    *
 * Contributors are mentioned in the code where appropriate.              *
 *                                                                        *
 * Permission to use, copy, modify and distribute this software and its   *
 * documentation strictly for non-commercial purposes is hereby granted   *
 * without fee, provided that the above copyright notice appears in all   *
 * copies and that both the copyright notice and this permission notice   *
 * appear in the supporting documentation. The authors make no claims     *
 * about the suitability of this software for any purpose. It is          *
 * provided "as is" without express or implied warranty.                  *
 **************************************************************************/

/* $Id$ */

///////////////////////////////////////////////////////////////////////////////
// EMCAL Preprocessor class. It runs by Shuttle at the end of the run,
// calculates stuff to be posted in OCDB
//
// Author: Boris Polichtchouk, 4 October 2006
// Adapted for EMCAL by Gustavo Conesa Balbastre, October 2006
// Updated by David Silvermyr May 2008, based on TPC code
///////////////////////////////////////////////////////////////////////////////

//Root
#include "TFile.h"
#include "TTree.h"
#include "TEnv.h"
#include "TParameter.h"

#include <TTimeStamp.h>

//AliRoot
#include "AliShuttleInterface.h"
#include "AliEMCALPreprocessor.h"
#include "AliLog.h"
#include "AliCDBMetaData.h"
#include "AliCaloCalibPedestal.h"
#include "AliCaloCalibSignal.h"
#include "AliEMCALSensorTempArray.h"

const Int_t kValCutTemp = 100;               // discard temperatures > 100 degrees
const Int_t kDiffCutTemp = 5;	             // discard temperature differences > 5 degrees
const TString kPedestalRunType = "PEDESTAL";  // pedestal run identifier
const TString kPhysicsRunType = "PHYSICS";   // physics run identifier
const TString kStandAloneRunType = "STANDALONE_BC"; // standalone run identifier
const TString kAmandaTemp = "PT_%02d.Temperature"; // Amanda string for temperature entries
//const Double_t kFitFraction = 0.7;                 // Fraction of DCS sensor fits required 
const Double_t kFitFraction = -1.0;          // Don't require minimum number of fits during commissioning 

const TString kMetaResponsible = "David Silvermyr";
//legacy comments and return codes from TPC
const TString kMetaComment = "Preprocessor AliEMCAL data base entries.";
const int kReturnCodeNoInfo = 9;
const int kReturnCodeNoObject = 2;
const int kReturnCodeNoEntries = 1;

ClassImp(AliEMCALPreprocessor)
  
//_______________________________________________________________________________________
AliEMCALPreprocessor::AliEMCALPreprocessor() :
  AliPreprocessor("EMC",0),
  fConfEnv(0), 
  fTemp(0), 
  fConfigOK(kTRUE)
{
  //default constructor
}

//_______________________________________________________________________________________
AliEMCALPreprocessor::AliEMCALPreprocessor(AliShuttleInterface* shuttle):
  AliPreprocessor("EMC",shuttle),
  fConfEnv(0), 
  fTemp(0), 
  fConfigOK(kTRUE)
{
  // Constructor AddRunType(kPedestalRunType);
  
  // define run types to be processed
  AddRunType(kPedestalRunType);
  AddRunType(kPhysicsRunType);
  AddRunType(kStandAloneRunType);
}

//______________________________________________________________________________________________
AliEMCALPreprocessor::AliEMCALPreprocessor(const AliEMCALPreprocessor&  ) :
  AliPreprocessor("EMCAL",0),
  fConfEnv(0), fTemp(0), fConfigOK(kTRUE)
{
  Fatal("AliEMCALPreprocessor", "copy constructor not implemented");
}

// assignment operator; use copy ctor to make life easy.
//______________________________________________________________________________________________
AliEMCALPreprocessor& AliEMCALPreprocessor::operator = (const AliEMCALPreprocessor &source ) 
{
  // assignment operator; use copy ctor
  if (&source == this) return *this;
  
  new (this) AliEMCALPreprocessor(source);
  return *this;
}

//____________________________________________________________________________
AliEMCALPreprocessor::~AliEMCALPreprocessor()
{
  // destructor
  if (fTemp) delete fTemp;
}

//______________________________________________________________________________________________
void AliEMCALPreprocessor::Initialize(Int_t run, UInt_t startTime,
				      UInt_t endTime)
{
  // Creates AliTestDataDCS object -- start maps half an hour beforre actual run start
  UInt_t startTimeLocal = startTime-1800;
  AliPreprocessor::Initialize(run, startTimeLocal, endTime);
  
  AliInfo(Form("\n\tRun %d \n\tStartTime %s \n\tEndTime %s", run,
	       TTimeStamp((time_t)startTime,0).AsString(),
	       TTimeStamp((time_t)endTime,0).AsString()));
  
  // Preprocessor configuration
  AliCDBEntry* entry = GetFromOCDB("Config", "Preprocessor");
  if (entry) fConfEnv = (TEnv*) entry->GetObject();
  if ( fConfEnv==0 ) {
    Log("AliEMCALPreprocessor: Preprocessor Config OCDB entry missing.\n");
    fConfigOK = kFALSE;
    return;
  }
  
  // Temperature sensors
  TTree *confTree = 0;
  
  TString tempConf = fConfEnv->GetValue("Temperature","ON");
  tempConf.ToUpper();
  if (tempConf != "OFF" ) {
    entry = GetFromOCDB("Config", "Temperature");
    if (entry) confTree = (TTree*) entry->GetObject();
    if ( confTree==0 ) {
      Log("AliEMCALPreprocessor: Temperature Config OCDB entry missing.\n");
      fConfigOK = kFALSE;
      return;
    }
    fTemp = new AliEMCALSensorTempArray(startTimeLocal, fEndTime, confTree, kAmandaTemp);
    fTemp->SetValCut(kValCutTemp);
    fTemp->SetDiffCut(kDiffCutTemp);
  }
  
  return;
}

//______________________________________________________________________________________________
UInt_t AliEMCALPreprocessor::Process(TMap* dcsAliasMap)
{
  // Fills data into EMCAL calibrations objects
  // Amanda servers provide information directly through dcsAliasMap
  
  if (!fConfigOK) return kReturnCodeNoInfo;
  UInt_t result = 0;
  TObjArray *resultArray = new TObjArray();
  TString errorHandling = fConfEnv->GetValue("ErrorHandling","ON");
  errorHandling.ToUpper();
  TObject * status;
  
  UInt_t dcsResult=0;
  if (errorHandling == "OFF" ) {
    if (!dcsAliasMap) dcsResult = kReturnCodeNoEntries;
    if (dcsAliasMap->GetEntries() == 0 ) dcsResult = kReturnCodeNoEntries;  
    status = new TParameter<int>("dcsResult",dcsResult);
    resultArray->Add(status);
  } 
  else {
    if (!dcsAliasMap) return kReturnCodeNoInfo;
    if (dcsAliasMap->GetEntries() == 0 ) return kReturnCodeNoInfo;
  }
  
  TString runType = GetRunType();
  
  // Temperature sensors are processed by AliEMCALCalTemp
  TString tempConf = fConfEnv->GetValue("Temperature","ON");
  tempConf.ToUpper();
  if (tempConf != "OFF" ) {
    UInt_t tempResult = MapTemperature(dcsAliasMap);
    result=tempResult;
    status = new TParameter<int>("tempResult",tempResult);
    resultArray->Add(status);
  }
  
  // Other calibration information will be retrieved through FXS files
  //  examples:
  //    TList* fileSourcesDAQ = GetFile(AliShuttleInterface::kDAQ, "pedestals");
  //    const char* fileNamePed = GetFile(AliShuttleInterface::kDAQ, "pedestals", "LDC1");
  //
  //    TList* fileSourcesHLT = GetFile(AliShuttleInterface::kHLT, "calib");
  //    const char* fileNameHLT = GetFile(AliShuttleInterface::kHLT, "calib", "LDC1");
  
  // PEDESTAL ENTRIES:
  
  if (runType == kPedestalRunType || runType == kStandAloneRunType) {
    Int_t numSources = 1;
    Int_t pedestalSource[2] = {AliShuttleInterface::kDAQ, AliShuttleInterface::kHLT} ;
    TString source = fConfEnv->GetValue("Pedestal","DAQ");
    source.ToUpper();
    if (source != "OFF" ) { 
      if ( source == "HLT") pedestalSource[0] = AliShuttleInterface::kHLT;
      if (!GetHLTStatus()) pedestalSource[0] = AliShuttleInterface::kDAQ;
      if (source == "HLTDAQ" ) {
	numSources=2;
	pedestalSource[0] = AliShuttleInterface::kHLT;
	pedestalSource[1] = AliShuttleInterface::kDAQ;
      }
      if (source == "DAQHLT" ) numSources=2;
      UInt_t pedestalResult=0;
      for (Int_t i=0; i<numSources; i++ ) {	
	pedestalResult = ExtractPedestals(pedestalSource[i]);
	if ( pedestalResult == 0 ) break;
      }
      result += pedestalResult;
      status = new TParameter<int>("pedestalResult",pedestalResult);
      resultArray->Add(status);
    }
  }
  
  // SIGNAL/LED ENTRIES:
  if( runType == kPhysicsRunType || runType == kStandAloneRunType ) {
    Int_t numSources = 1;
    Int_t signalSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
    TString source = fConfEnv->GetValue("Signal","DAQ");
    source.ToUpper();
    if ( source != "OFF") { 
      if ( source == "HLT") signalSource[0] = AliShuttleInterface::kHLT;
      if (!GetHLTStatus()) signalSource[0] = AliShuttleInterface::kDAQ;
      if (source == "HLTDAQ" ) {
	numSources=2;
	signalSource[0] = AliShuttleInterface::kHLT;
	signalSource[1] = AliShuttleInterface::kDAQ;
      }
      if (source == "DAQHLT" ) numSources=2;
      UInt_t signalResult=0;
      for (Int_t i=0; i<numSources; i++ ) {	
	signalResult = ExtractSignal(signalSource[i]);
	if ( signalResult == 0 ) break;
      }
      result += signalResult;
      status = new TParameter<int>("signalResult",signalResult);
      resultArray->Add(status);
    }
  }
  
  
  // overall status at the end
  if (errorHandling == "OFF" ) {
    AliCDBMetaData metaData;
    metaData.SetBeamPeriod(0);
    metaData.SetResponsible(kMetaResponsible);
    metaData.SetComment("Preprocessor AliEMCAL status.");
    Store("Calib", "PreprocStatus", resultArray, &metaData, 0, kFALSE);
    resultArray->Delete();
    return 0;
  } 
  else { 
    return result;
  }
  
}
//______________________________________________________________________________________________
UInt_t AliEMCALPreprocessor::MapTemperature(TMap* dcsAliasMap)
{
  // extract DCS temperature maps. Perform fits to save space
  UInt_t result=0;

  TMap *map = fTemp->ExtractDCS(dcsAliasMap);
  if (map) {
    fTemp->MakeSplineFit(map);
    Double_t fitFraction = 1.0*fTemp->NumFits()/fTemp->NumSensors(); 
    if (fitFraction > kFitFraction ) {
      AliInfo(Form("Temperature values extracted, fits performed.\n"));
    } 
    else { 
      Log ("Too few temperature maps fitted. \n");
      result = kReturnCodeNoInfo;
    }
  } 
  else {
    Log("No temperature map extracted. \n");
    result = kReturnCodeNoInfo;
  }
  delete map;
  // Now store the final CDB file
  
  if ( result == 0 ) { // some info was found
    AliCDBMetaData metaData;
    metaData.SetBeamPeriod(0);
    metaData.SetResponsible(kMetaResponsible);
    metaData.SetComment(kMetaComment);
    
    Bool_t storeOK = Store("Calib", "Temperature", fTemp, &metaData, 0, kFALSE);
    if ( !storeOK )  result=1;
  }
  
  return result;
}

//______________________________________________________________________________________________
UInt_t AliEMCALPreprocessor::ExtractPedestals(Int_t sourceFXS)
{
  UInt_t result=0;
  //
  //  Read pedestal file from file exchange server
  //  Only store if new pedestal info is available
  //
  AliCaloCalibPedestal *calibPed = new AliCaloCalibPedestal(AliCaloCalibPedestal::kEmCal);
  
  TList* list = GetFileSources(sourceFXS,"pedestals");
  if (list && list->GetEntries()>0) {
    
    //  loop through all files from LDCs

    int changes = 0;
    UInt_t index = 0;
    while (list->At(index)!=NULL) {
      TObjString* fileNameEntry = (TObjString*) list->At(index);
      if (fileNameEntry!=NULL) {
        TString fileName = GetFile(sourceFXS, "pedestals",
				   fileNameEntry->GetString().Data());
        TFile *f = TFile::Open(fileName);
        if (!f) {
	  Log ("Error opening pedestal file.");
	  result = kReturnCodeNoObject;
	  break;
	}
        AliCaloCalibPedestal *calPed;
	f->GetObject("emcCalibPedestal",calPed);
        if ( !calPed ) {
	  Log ("No pedestal calibration object in file.");
	  result = kReturnCodeNoObject;
	  break;
	}
	if ( calPed->GetNEvents()>0 && calPed->GetNChanFills()>0 ) {
	  // add info for the modules available in the present file
	  Bool_t status = calibPed->AddInfo(calPed);
	  if (status) { changes++; }
	}
	
        delete calPed; 
        f->Close();
      }
      index++;
    }  // while(list)
    
    //
    //  Store updated pedestal entry to OCDB
    //
    if (changes>0) {
      AliCDBMetaData metaData;
      metaData.SetBeamPeriod(0);
      metaData.SetResponsible(kMetaResponsible);
      metaData.SetComment(kMetaComment); 
      
      Bool_t storeOK = StoreReferenceData("Calib", "Pedestals", calibPed, &metaData);
      if ( !storeOK ) result++;
    }
  } 
  else {
    Log ("Error: no entries in input file list!");
    result = kReturnCodeNoEntries;
  }
  
  return result;
}

//______________________________________________________________________________________________
UInt_t AliEMCALPreprocessor::ExtractSignal(Int_t sourceFXS)
{
  UInt_t result=0;
  //
  //  Read signal file from file exchange server
  //  Only store if new signal info is available
  //
  AliCaloCalibSignal *calibSig = new AliCaloCalibSignal(AliCaloCalibSignal::kEmCal); 
  
  TList* list = GetFileSources(sourceFXS,"signal");
  if (list && list->GetEntries()>0) {

    //  loop through all files from LDCs
    
    int changes = 0;
    UInt_t index = 0;
    while (list->At(index)!=NULL) {
      TObjString* fileNameEntry = (TObjString*) list->At(index);
      if (fileNameEntry!=NULL) {
        TString fileName = GetFile(sourceFXS, "signal",
				   fileNameEntry->GetString().Data());
        TFile *f = TFile::Open(fileName);
        if (!f) {
	  Log ("Error opening signal file.");
	  result = kReturnCodeNoObject;
	  break;
	}
	AliCaloCalibSignal *calSig;
	f->GetObject("emcCalibSignal",calSig);
        if ( !calSig ) {
	  Log ("No signal calibration object in file.");
	  result = kReturnCodeNoObject;
	  break;
	}
	if ( calSig->GetNEvents()>0 ) {
	  // add info for the modules available in the present file
	  Bool_t status = calibSig->AddInfo(calSig);
	  if (status) { changes++; }
	}
	
        delete calSig; 
        f->Close();
      }
      index++;
    }  // while(list)
    
    //
    //  Store updated signal entry to OCDB
    //
    if (changes>0) {
      AliCDBMetaData metaData;
      metaData.SetBeamPeriod(0);
      metaData.SetResponsible(kMetaResponsible);
      metaData.SetComment(kMetaComment); 
      
      Bool_t storeOK = Store("Calib", "LED", calibSig, &metaData, 0, kFALSE);
      if ( !storeOK ) result++;
    }
  } 
  else {
    Log ("Error: no entries in input file list!");
    result = kReturnCodeNoEntries;
  }

  return result;
}
Commit	Line	Data
9e788b10	1	/**************************************************************************
	2	* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
	3	* *
	4	* Author: The ALICE Off-line Project. *
	5	* Contributors are mentioned in the code where appropriate. *
	6	* *
	7	* Permission to use, copy, modify and distribute this software and its *
	8	* documentation strictly for non-commercial purposes is hereby granted *
	9	* without fee, provided that the above copyright notice appears in all *
	10	* copies and that both the copyright notice and this permission notice *
	11	* appear in the supporting documentation. The authors make no claims *
	12	* about the suitability of this software for any purpose. It is *
	13	* provided "as is" without express or implied warranty. *
	14	**************************************************************************/
	15
	16	/* $Id$ */
132753b5	17
9e788b10	18	///////////////////////////////////////////////////////////////////////////////
9e788b10	19	// EMCAL Preprocessor class. It runs by Shuttle at the end of the run,
132753b5	20	// calculates stuff to be posted in OCDB
9e788b10	21	//
	22	// Author: Boris Polichtchouk, 4 October 2006
	23	// Adapted for EMCAL by Gustavo Conesa Balbastre, October 2006
132753b5	24	// Updated by David Silvermyr May 2008, based on TPC code
9e788b10	25	///////////////////////////////////////////////////////////////////////////////
9e788b10	26
80c68391	27	//Root
9e788b10	28	#include "TFile.h"
132753b5	29	#include "TTree.h"
	30	#include "TEnv.h"
	31	#include "TParameter.h"
	32
	33	#include <TTimeStamp.h>
8e8e4fc8	34
80c68391	35	//AliRoot
132753b5	36	#include "AliShuttleInterface.h"
80c68391	37	#include "AliEMCALPreprocessor.h"
	38	#include "AliLog.h"
	39	#include "AliCDBMetaData.h"
132753b5	40	#include "AliCaloCalibPedestal.h"
	41	#include "AliCaloCalibSignal.h"
	42	#include "AliEMCALSensorTempArray.h"
9e788b10	43
132753b5	44	const Int_t kValCutTemp = 100; // discard temperatures > 100 degrees
	45	const Int_t kDiffCutTemp = 5; // discard temperature differences > 5 degrees
	46	const TString kPedestalRunType = "PEDESTAL"; // pedestal run identifier
	47	const TString kPhysicsRunType = "PHYSICS"; // physics run identifier
8bc94fba	48	const TString kStandAloneRunType = "STANDALONE_BC"; // standalone run identifier
32fbe941	49	const TString kAmandaTemp = "PT_%02d.Temperature"; // Amanda string for temperature entries
132753b5	50	//const Double_t kFitFraction = 0.7; // Fraction of DCS sensor fits required
132753b5	51	const Double_t kFitFraction = -1.0; // Don't require minimum number of fits during commissioning
9e788b10	52
132753b5	53	const TString kMetaResponsible = "David Silvermyr";
	54	//legacy comments and return codes from TPC
	55	const TString kMetaComment = "Preprocessor AliEMCAL data base entries.";
	56	const int kReturnCodeNoInfo = 9;
	57	const int kReturnCodeNoObject = 2;
	58	const int kReturnCodeNoEntries = 1;
	59
	60	ClassImp(AliEMCALPreprocessor)
	61
9e788b10	62	//_______________________________________________________________________________________
9e788b10	63	AliEMCALPreprocessor::AliEMCALPreprocessor() :
132753b5	64	AliPreprocessor("EMC",0),
	65	fConfEnv(0),
	66	fTemp(0),
	67	fConfigOK(kTRUE)
9e788b10	68	{
	69	//default constructor
	70	}
	71
	72	//_______________________________________________________________________________________
80c68391	73	AliEMCALPreprocessor::AliEMCALPreprocessor(AliShuttleInterface* shuttle):
132753b5	74	AliPreprocessor("EMC",shuttle),
	75	fConfEnv(0),
	76	fTemp(0),
	77	fConfigOK(kTRUE)
9e788b10	78	{
132753b5	79	// Constructor AddRunType(kPedestalRunType);
	80
	81	// define run types to be processed
	82	AddRunType(kPedestalRunType);
	83	AddRunType(kPhysicsRunType);
	84	AddRunType(kStandAloneRunType);
	85	}
6c0734ce	86
132753b5	87	//______________________________________________________________________________________________
	88	AliEMCALPreprocessor::AliEMCALPreprocessor(const AliEMCALPreprocessor& ) :
	89	AliPreprocessor("EMCAL",0),
	90	fConfEnv(0), fTemp(0), fConfigOK(kTRUE)
	91	{
	92	Fatal("AliEMCALPreprocessor", "copy constructor not implemented");
9e788b10	93	}
9e788b10	94
132753b5	95	// assignment operator; use copy ctor to make life easy.
	96	//______________________________________________________________________________________________
	97	AliEMCALPreprocessor& AliEMCALPreprocessor::operator = (const AliEMCALPreprocessor &source )
9e788b10	98	{
132753b5	99	// assignment operator; use copy ctor
132753b5	100	if (&source == this) return *this;
b3204f43	101
132753b5	102	new (this) AliEMCALPreprocessor(source);
	103	return *this;
	104	}
09744db4	105
132753b5	106	//____________________________________________________________________________
	107	AliEMCALPreprocessor::~AliEMCALPreprocessor()
	108	{
	109	// destructor
	110	if (fTemp) delete fTemp;
	111	}
	112
	113	//______________________________________________________________________________________________
	114	void AliEMCALPreprocessor::Initialize(Int_t run, UInt_t startTime,
	115	UInt_t endTime)
	116	{
	117	// Creates AliTestDataDCS object -- start maps half an hour beforre actual run start
	118	UInt_t startTimeLocal = startTime-1800;
	119	AliPreprocessor::Initialize(run, startTimeLocal, endTime);
80c68391	120
132753b5	121	AliInfo(Form("\n\tRun %d \n\tStartTime %s \n\tEndTime %s", run,
	122	TTimeStamp((time_t)startTime,0).AsString(),
	123	TTimeStamp((time_t)endTime,0).AsString()));
80c68391	124
132753b5	125	// Preprocessor configuration
	126	AliCDBEntry* entry = GetFromOCDB("Config", "Preprocessor");
	127	if (entry) fConfEnv = (TEnv*) entry->GetObject();
	128	if ( fConfEnv==0 ) {
8f79a6d7	129	Log("AliEMCALPreprocessor: Preprocessor Config OCDB entry missing.\n");
132753b5	130	fConfigOK = kFALSE;
132753b5	131	return;
09744db4	132	}
09744db4	133
132753b5	134	// Temperature sensors
132753b5	135	TTree *confTree = 0;
09744db4	136
132753b5	137	TString tempConf = fConfEnv->GetValue("Temperature","ON");
	138	tempConf.ToUpper();
	139	if (tempConf != "OFF" ) {
	140	entry = GetFromOCDB("Config", "Temperature");
	141	if (entry) confTree = (TTree*) entry->GetObject();
	142	if ( confTree==0 ) {
8f79a6d7	143	Log("AliEMCALPreprocessor: Temperature Config OCDB entry missing.\n");
132753b5	144	fConfigOK = kFALSE;
132753b5	145	return;
09744db4	146	}
132753b5	147	fTemp = new AliEMCALSensorTempArray(startTimeLocal, fEndTime, confTree, kAmandaTemp);
	148	fTemp->SetValCut(kValCutTemp);
	149	fTemp->SetDiffCut(kDiffCutTemp);
	150	}
	151
	152	return;
	153	}
09744db4	154
132753b5	155	//______________________________________________________________________________________________
	156	UInt_t AliEMCALPreprocessor::Process(TMap* dcsAliasMap)
	157	{
	158	// Fills data into EMCAL calibrations objects
	159	// Amanda servers provide information directly through dcsAliasMap
	160
	161	if (!fConfigOK) return kReturnCodeNoInfo;
	162	UInt_t result = 0;
	163	TObjArray *resultArray = new TObjArray();
	164	TString errorHandling = fConfEnv->GetValue("ErrorHandling","ON");
	165	errorHandling.ToUpper();
	166	TObject * status;
	167
	168	UInt_t dcsResult=0;
	169	if (errorHandling == "OFF" ) {
	170	if (!dcsAliasMap) dcsResult = kReturnCodeNoEntries;
	171	if (dcsAliasMap->GetEntries() == 0 ) dcsResult = kReturnCodeNoEntries;
	172	status = new TParameter<int>("dcsResult",dcsResult);
	173	resultArray->Add(status);
	174	}
	175	else {
	176	if (!dcsAliasMap) return kReturnCodeNoInfo;
	177	if (dcsAliasMap->GetEntries() == 0 ) return kReturnCodeNoInfo;
	178	}
	179
	180	TString runType = GetRunType();
	181
	182	// Temperature sensors are processed by AliEMCALCalTemp
	183	TString tempConf = fConfEnv->GetValue("Temperature","ON");
	184	tempConf.ToUpper();
	185	if (tempConf != "OFF" ) {
	186	UInt_t tempResult = MapTemperature(dcsAliasMap);
	187	result=tempResult;
	188	status = new TParameter<int>("tempResult",tempResult);
	189	resultArray->Add(status);
	190	}
	191
	192	// Other calibration information will be retrieved through FXS files
	193	// examples:
	194	// TList* fileSourcesDAQ = GetFile(AliShuttleInterface::kDAQ, "pedestals");
	195	// const char* fileNamePed = GetFile(AliShuttleInterface::kDAQ, "pedestals", "LDC1");
	196	//
	197	// TList* fileSourcesHLT = GetFile(AliShuttleInterface::kHLT, "calib");
	198	// const char* fileNameHLT = GetFile(AliShuttleInterface::kHLT, "calib", "LDC1");
	199
	200	// PEDESTAL ENTRIES:
	201
8bc94fba	202	if (runType == kPedestalRunType \|\| runType == kStandAloneRunType) {
132753b5	203	Int_t numSources = 1;
	204	Int_t pedestalSource[2] = {AliShuttleInterface::kDAQ, AliShuttleInterface::kHLT} ;
	205	TString source = fConfEnv->GetValue("Pedestal","DAQ");
	206	source.ToUpper();
	207	if (source != "OFF" ) {
	208	if ( source == "HLT") pedestalSource[0] = AliShuttleInterface::kHLT;
	209	if (!GetHLTStatus()) pedestalSource[0] = AliShuttleInterface::kDAQ;
	210	if (source == "HLTDAQ" ) {
	211	numSources=2;
	212	pedestalSource[0] = AliShuttleInterface::kHLT;
	213	pedestalSource[1] = AliShuttleInterface::kDAQ;
	214	}
	215	if (source == "DAQHLT" ) numSources=2;
	216	UInt_t pedestalResult=0;
	217	for (Int_t i=0; i<numSources; i++ ) {
	218	pedestalResult = ExtractPedestals(pedestalSource[i]);
	219	if ( pedestalResult == 0 ) break;
	220	}
	221	result += pedestalResult;
	222	status = new TParameter<int>("pedestalResult",pedestalResult);
	223	resultArray->Add(status);
09744db4	224	}
132753b5	225	}
	226
	227	// SIGNAL/LED ENTRIES:
d6e64e82	228	if( runType == kPhysicsRunType \|\| runType == kStandAloneRunType ) {
132753b5	229	Int_t numSources = 1;
	230	Int_t signalSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
	231	TString source = fConfEnv->GetValue("Signal","DAQ");
	232	source.ToUpper();
	233	if ( source != "OFF") {
	234	if ( source == "HLT") signalSource[0] = AliShuttleInterface::kHLT;
	235	if (!GetHLTStatus()) signalSource[0] = AliShuttleInterface::kDAQ;
	236	if (source == "HLTDAQ" ) {
	237	numSources=2;
	238	signalSource[0] = AliShuttleInterface::kHLT;
	239	signalSource[1] = AliShuttleInterface::kDAQ;
	240	}
	241	if (source == "DAQHLT" ) numSources=2;
	242	UInt_t signalResult=0;
	243	for (Int_t i=0; i<numSources; i++ ) {
	244	signalResult = ExtractSignal(signalSource[i]);
	245	if ( signalResult == 0 ) break;
09744db4	246	}
132753b5	247	result += signalResult;
	248	status = new TParameter<int>("signalResult",signalResult);
	249	resultArray->Add(status);
09744db4	250	}
132753b5	251	}
	252
	253
	254	// overall status at the end
	255	if (errorHandling == "OFF" ) {
	256	AliCDBMetaData metaData;
	257	metaData.SetBeamPeriod(0);
	258	metaData.SetResponsible(kMetaResponsible);
	259	metaData.SetComment("Preprocessor AliEMCAL status.");
	260	Store("Calib", "PreprocStatus", resultArray, &metaData, 0, kFALSE);
	261	resultArray->Delete();
	262	return 0;
	263	}
	264	else {
	265	return result;
	266	}
	267
	268	}
	269	//______________________________________________________________________________________________
	270	UInt_t AliEMCALPreprocessor::MapTemperature(TMap* dcsAliasMap)
	271	{
	272	// extract DCS temperature maps. Perform fits to save space
	273	UInt_t result=0;
	274
	275	TMap *map = fTemp->ExtractDCS(dcsAliasMap);
	276	if (map) {
	277	fTemp->MakeSplineFit(map);
	278	Double_t fitFraction = 1.0*fTemp->NumFits()/fTemp->NumSensors();
	279	if (fitFraction > kFitFraction ) {
	280	AliInfo(Form("Temperature values extracted, fits performed.\n"));
	281	}
	282	else {
	283	Log ("Too few temperature maps fitted. \n");
	284	result = kReturnCodeNoInfo;
	285	}
	286	}
	287	else {
	288	Log("No temperature map extracted. \n");
	289	result = kReturnCodeNoInfo;
	290	}
	291	delete map;
	292	// Now store the final CDB file
	293
	294	if ( result == 0 ) { // some info was found
	295	AliCDBMetaData metaData;
	296	metaData.SetBeamPeriod(0);
	297	metaData.SetResponsible(kMetaResponsible);
	298	metaData.SetComment(kMetaComment);
09744db4	299
132753b5	300	Bool_t storeOK = Store("Calib", "Temperature", fTemp, &metaData, 0, kFALSE);
	301	if ( !storeOK ) result=1;
	302	}
	303
	304	return result;
	305	}
	306
	307	//______________________________________________________________________________________________
	308	UInt_t AliEMCALPreprocessor::ExtractPedestals(Int_t sourceFXS)
	309	{
	310	UInt_t result=0;
	311	//
	312	// Read pedestal file from file exchange server
4eef2cc9	313	// Only store if new pedestal info is available
132753b5	314	//
4eef2cc9	315	AliCaloCalibPedestal *calibPed = new AliCaloCalibPedestal(AliCaloCalibPedestal::kEmCal);
132753b5	316
	317	TList* list = GetFileSources(sourceFXS,"pedestals");
	318	if (list && list->GetEntries()>0) {
	319
132753b5	320	// loop through all files from LDCs
	321
	322	int changes = 0;
	323	UInt_t index = 0;
	324	while (list->At(index)!=NULL) {
	325	TObjString* fileNameEntry = (TObjString*) list->At(index);
	326	if (fileNameEntry!=NULL) {
	327	TString fileName = GetFile(sourceFXS, "pedestals",
	328	fileNameEntry->GetString().Data());
	329	TFile *f = TFile::Open(fileName);
	330	if (!f) {
	331	Log ("Error opening pedestal file.");
	332	result = kReturnCodeNoObject;
	333	break;
	334	}
	335	AliCaloCalibPedestal *calPed;
	336	f->GetObject("emcCalibPedestal",calPed);
	337	if ( !calPed ) {
	338	Log ("No pedestal calibration object in file.");
	339	result = kReturnCodeNoObject;
	340	break;
	341	}
	342	if ( calPed->GetNEvents()>0 && calPed->GetNChanFills()>0 ) {
	343	// add info for the modules available in the present file
	344	Bool_t status = calibPed->AddInfo(calPed);
	345	if (status) { changes++; }
b3204f43	346	}
132753b5	347
	348	delete calPed;
	349	f->Close();
09744db4	350	}
132753b5	351	index++;
	352	} // while(list)
	353
	354	//
	355	// Store updated pedestal entry to OCDB
	356	//
	357	if (changes>0) {
	358	AliCDBMetaData metaData;
	359	metaData.SetBeamPeriod(0);
	360	metaData.SetResponsible(kMetaResponsible);
	361	metaData.SetComment(kMetaComment);
	362
	363	Bool_t storeOK = StoreReferenceData("Calib", "Pedestals", calibPed, &metaData);
	364	if ( !storeOK ) result++;
09744db4	365	}
132753b5	366	}
	367	else {
	368	Log ("Error: no entries in input file list!");
	369	result = kReturnCodeNoEntries;
	370	}
b3204f43	371
132753b5	372	return result;
	373	}
	374
	375	//______________________________________________________________________________________________
	376	UInt_t AliEMCALPreprocessor::ExtractSignal(Int_t sourceFXS)
	377	{
	378	UInt_t result=0;
	379	//
	380	// Read signal file from file exchange server
4eef2cc9	381	// Only store if new signal info is available
132753b5	382	//
4eef2cc9	383	AliCaloCalibSignal *calibSig = new AliCaloCalibSignal(AliCaloCalibSignal::kEmCal);
b3204f43	384
132753b5	385	TList* list = GetFileSources(sourceFXS,"signal");
132753b5	386	if (list && list->GetEntries()>0) {
32fbe941	387
132753b5	388	// loop through all files from LDCs
	389
	390	int changes = 0;
	391	UInt_t index = 0;
	392	while (list->At(index)!=NULL) {
	393	TObjString* fileNameEntry = (TObjString*) list->At(index);
	394	if (fileNameEntry!=NULL) {
	395	TString fileName = GetFile(sourceFXS, "signal",
	396	fileNameEntry->GetString().Data());
	397	TFile *f = TFile::Open(fileName);
	398	if (!f) {
	399	Log ("Error opening signal file.");
	400	result = kReturnCodeNoObject;
	401	break;
	402	}
	403	AliCaloCalibSignal *calSig;
	404	f->GetObject("emcCalibSignal",calSig);
	405	if ( !calSig ) {
	406	Log ("No signal calibration object in file.");
	407	result = kReturnCodeNoObject;
	408	break;
	409	}
	410	if ( calSig->GetNEvents()>0 ) {
	411	// add info for the modules available in the present file
	412	Bool_t status = calibSig->AddInfo(calSig);
	413	if (status) { changes++; }
	414	}
	415
	416	delete calSig;
	417	f->Close();
	418	}
	419	index++;
	420	} // while(list)
	421
	422	//
	423	// Store updated signal entry to OCDB
	424	//
	425	if (changes>0) {
	426	AliCDBMetaData metaData;
	427	metaData.SetBeamPeriod(0);
	428	metaData.SetResponsible(kMetaResponsible);
	429	metaData.SetComment(kMetaComment);
	430
81c4c29b	431	Bool_t storeOK = Store("Calib", "LED", calibSig, &metaData, 0, kFALSE);
132753b5	432	if ( !storeOK ) result++;
	433	}
	434	}
	435	else {
	436	Log ("Error: no entries in input file list!");
	437	result = kReturnCodeNoEntries;
	438	}
	439
	440	return result;
9e788b10	441	}
132753b5	442
132753b5	443