]>
Commit | Line | Data |
---|---|---|
172b0d90 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
cee918ed | 16 | // This class Defines the Geometry for the ITS services and support cones |
17 | // outside of the ceneteral volume (except for the Ceneteral support | |
18 | // cylinders. Other classes define the rest of the ITS. Specificaly the ITS | |
19 | // The SSD support cone,SSD Support centeral cylinder, SDD support cone, | |
20 | // The SDD cupport centeral cylinder, the SPD Thermal Sheald, The supports | |
21 | // and cable trays on both the RB26 (muon dump) and RB24 sides, and all of | |
22 | // the cabling from the ladders/stave ends out past the TPC. | |
23 | ||
172b0d90 | 24 | /* $Id$ */ |
172b0d90 | 25 | // General Root includes |
172b0d90 | 26 | #include <TMath.h> |
172b0d90 | 27 | // Root Geometry includes |
543b7370 | 28 | //#include <AliLog.h> |
172b0d90 | 29 | #include <TGeoManager.h> |
30 | #include <TGeoVolume.h> | |
31 | #include <TGeoPcon.h> | |
32 | #include <TGeoCone.h> | |
33 | #include <TGeoTube.h> // contaings TGeoTubeSeg | |
34 | #include <TGeoArb8.h> | |
db486a6e | 35 | #include <TGeoXtru.h> |
172b0d90 | 36 | #include <TGeoCompositeShape.h> |
37 | #include <TGeoMatrix.h> | |
172b0d90 | 38 | #include "AliITSv11GeometrySupport.h" |
39 | ||
40 | ClassImp(AliITSv11GeometrySupport) | |
41 | ||
42 | #define SQ(A) (A)*(A) | |
43 | ||
44 | //______________________________________________________________________ | |
43aefea7 | 45 | void AliITSv11GeometrySupport::SPDCone(TGeoVolume *moth,const TGeoManager *mgr) |
a275e8ba | 46 | { |
47 | // | |
48 | // Creates the SPD thermal shield as a volume assembly | |
49 | // and adds it to the mother volume | |
50 | // (this is actually a merge of the previous SPDThermalSheald method | |
51 | // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06 and the | |
52 | // CreateSPDThermalShield method of AliITSv11Hybrid) | |
53 | // | |
54 | // Input: | |
55 | // moth : the TGeoVolume owing the volume structure | |
56 | // mgr : the GeoManager (default gGeoManager) | |
57 | // Output: | |
58 | // | |
59 | // Created: ??? ??? | |
60 | // Updated: 11 Dec 2007 Mario Sitta | |
61 | // | |
62 | // Technical data are taken from: ALICE-Thermal Screen "Cone transition" | |
63 | // (thermal-screen1_a3.ps), "Cylinder" (thermal-screen2_a3.ps), "Half | |
64 | // assembly" (thermal-screen3_a3.ps), "Flange" (thermal-screen4_a3.ps) | |
65 | ||
66 | ||
67 | // Dimensions of the Central shield | |
ddf00e3c | 68 | const Double_t kHalfLengthCentral = 400.*fgkmm; |
a275e8ba | 69 | const Double_t kThicknessCentral = 0.4*fgkmm; |
70 | const Double_t kInnerRadiusCentral = 8.1475*fgkcm; | |
71 | const Double_t kOuterRadiusCentral = 9.9255*fgkcm; | |
72 | const Double_t kInnerACentral = 3.1674*fgkcm; | |
73 | const Double_t kInnerBCentral = 2.023 *fgkcm; | |
74 | const Double_t kOuterACentral = 2.4374*fgkcm; | |
75 | const Double_t kOuterBCentral = 3.8162*fgkcm; | |
76 | // Dimensions of the EndCap shield | |
77 | const Double_t kHalfLengthEndCap = 25.*fgkmm; | |
78 | const Double_t kThicknessEndCap = 2.0*fgkmm; | |
79 | const Double_t kInnerRadiusEndCap = 8.0775*fgkcm; | |
80 | const Double_t kOuterRadiusEndCap = 9.9955*fgkcm; | |
81 | const Double_t kInnerAEndCap = 3.1453*fgkcm; | |
82 | const Double_t kInnerBEndCap = 2.0009*fgkcm; | |
83 | const Double_t kOuterAEndCap = 2.4596*fgkcm; | |
84 | const Double_t kOuterBEndCap = 3.8384*fgkcm; | |
85 | // Dimensions of the Cone shield | |
86 | const Double_t kHalfLengthCone = 145.*fgkmm; | |
87 | const Double_t kThicknessCone = 0.3*fgkmm; | |
88 | const Double_t kInnerRadialCone = 37.3*fgkcm; | |
89 | const Double_t kOuterRadialCone = 39.0*fgkcm; | |
90 | const Double_t kInnerACone = 14.2344*fgkcm; | |
91 | // const Double_t kInnerBCone = 9.0915*fgkcm; | |
92 | const Double_t kOuterACone = 9.5058*fgkcm; | |
93 | // const Double_t kOuterBCone = 14.8831*fgkcm; | |
94 | // Dimensions of the Flange's Ring and Wing | |
95 | const Double_t kHalfLengthRing = 7.5*fgkmm; | |
96 | const Double_t kThicknessRing = 0.3*fgkmm; | |
97 | const Double_t kInnerRadiusRing = 37.3*fgkcm; | |
98 | const Double_t kOuterRadiusRing = 42.0*fgkcm; | |
99 | const Double_t kOuterRadiusWing = 49.25*fgkcm; | |
ca86fdb4 | 100 | const Double_t kWideWing = 6.0*fgkcm; |
0b9c8a10 | 101 | const Double_t kThetaWing = 45.0; |
a275e8ba | 102 | // Common data |
103 | const Double_t kTheta = 36.0*TMath::DegToRad(); | |
104 | const Double_t kThicknessOmega = 0.3*fgkmm; | |
105 | ||
106 | // Local variables | |
107 | Double_t x, y; | |
108 | Double_t xshld[24], yshld[24]; | |
109 | Double_t xair[24] , yair[24]; | |
110 | Double_t xomega[48], yomega[48]; | |
111 | // Double_t *xyarb8; | |
112 | ||
113 | // The entire shield is made up of two half central shields | |
114 | // symmetric with respect to the XZ plane, four half end cap | |
115 | // shields, again symmetric with respect to the XZ plane, and four | |
116 | // half cones, symmetric with respect to the XZ plane too. | |
117 | ||
118 | TGeoVolumeAssembly *vM = new TGeoVolumeAssembly("ITSspdThermalShield"); | |
119 | ||
120 | // The central half shield: a half tube of carbon fiber, | |
121 | // a similar but proportionally smaller half tube of air inside it, | |
122 | // and a Omega-shaped carbon fiber insert inside the air. | |
123 | // They are all XTru shapes | |
124 | ||
125 | TGeoXtru *centralshape = new TGeoXtru(2); | |
126 | ||
127 | CreateSPDThermalShape(kInnerACentral,kInnerBCentral,kInnerRadiusCentral, | |
128 | kOuterACentral,kOuterBCentral,kOuterRadiusCentral, | |
129 | kTheta,xshld,yshld); | |
130 | ||
131 | centralshape->DefinePolygon(24,xshld,yshld); | |
132 | centralshape->DefineSection(0,-kHalfLengthCentral); | |
133 | centralshape->DefineSection(1, kHalfLengthCentral); | |
134 | ||
135 | // Now rescale to get the air volume dimensions | |
136 | InsidePoint(xshld[23], yshld[23], | |
137 | xshld[ 0], yshld[ 0], | |
138 | xshld[ 1], yshld[ 1], kThicknessCentral, | |
139 | xair[0], yair[0]); | |
140 | for (Int_t i=1; i<23; i++) { | |
141 | InsidePoint(xshld[i-1], yshld[i-1], | |
142 | xshld[ i ], yshld[ i ], | |
143 | xshld[i+1], yshld[i+1], kThicknessCentral, | |
144 | xair[i], yair[i]); | |
145 | } | |
146 | InsidePoint(xshld[22], yshld[22], | |
147 | xshld[23], yshld[23], | |
148 | xshld[ 0], yshld[ 0], kThicknessCentral, | |
149 | xair[23], yair[23]); | |
150 | ||
151 | // Create the air shape | |
152 | TGeoXtru *centralairshape = new TGeoXtru(2); | |
153 | ||
154 | centralairshape->DefinePolygon(24,xair,yair); | |
155 | centralairshape->DefineSection(0,-kHalfLengthCentral); | |
156 | centralairshape->DefineSection(1, kHalfLengthCentral); | |
157 | ||
158 | // Create the Omega insert | |
159 | TGeoXtru *centralomegashape = new TGeoXtru(2); | |
160 | ||
3d2705b6 | 161 | CreateSPDOmegaShape(xair,yair,kThicknessOmega,xomega,yomega); |
a275e8ba | 162 | |
163 | centralomegashape->DefinePolygon(48,xomega,yomega); | |
164 | centralomegashape->DefineSection(0,-kHalfLengthCentral); | |
165 | centralomegashape->DefineSection(1, kHalfLengthCentral); | |
166 | ||
167 | // The end cap half shield: a half tube of carbon fiber, | |
168 | // a similar but proportionally smaller half tube of air inside it, | |
169 | // and a Omega-shaped carbon fiber insert inside the air. | |
170 | // They are all XTru shapes | |
171 | ||
172 | TGeoXtru *endcapshape = new TGeoXtru(2); | |
173 | ||
174 | CreateSPDThermalShape(kInnerAEndCap,kInnerBEndCap,kInnerRadiusEndCap, | |
175 | kOuterAEndCap,kOuterBEndCap,kOuterRadiusEndCap, | |
176 | kTheta,xshld,yshld); | |
177 | ||
178 | endcapshape->DefinePolygon(24,xshld,yshld); | |
179 | endcapshape->DefineSection(0,-kHalfLengthEndCap); | |
180 | endcapshape->DefineSection(1, kHalfLengthEndCap); | |
181 | ||
182 | // Now rescale to get the air volume dimensions | |
183 | InsidePoint(xshld[23], yshld[23], | |
184 | xshld[ 0], yshld[ 0], | |
185 | xshld[ 1], yshld[ 1], kThicknessEndCap, | |
186 | xair[0], yair[0]); | |
187 | for (Int_t i=1; i<23; i++) { | |
188 | InsidePoint(xshld[i-1], yshld[i-1], | |
189 | xshld[ i ], yshld[ i ], | |
190 | xshld[i+1], yshld[i+1], kThicknessEndCap, | |
191 | xair[i], yair[i]); | |
192 | } | |
193 | InsidePoint(xshld[22], yshld[22], | |
194 | xshld[23], yshld[23], | |
195 | xshld[ 0], yshld[ 0], kThicknessEndCap, | |
196 | xair[23], yair[23]); | |
197 | ||
198 | // Create the air shape | |
199 | TGeoXtru *endcapairshape = new TGeoXtru(2); | |
200 | ||
201 | endcapairshape->DefinePolygon(24,xair,yair); | |
202 | endcapairshape->DefineSection(0,-kHalfLengthEndCap); | |
203 | endcapairshape->DefineSection(1, kHalfLengthEndCap); | |
204 | ||
205 | // Create the Omega insert | |
206 | TGeoXtru *endcapomegashape = new TGeoXtru(2); | |
207 | ||
3d2705b6 | 208 | CreateSPDOmegaShape(xair,yair,kThicknessOmega,xomega,yomega); |
a275e8ba | 209 | |
210 | endcapomegashape->DefinePolygon(48,xomega,yomega); | |
211 | endcapomegashape->DefineSection(0,-kHalfLengthEndCap); | |
212 | endcapomegashape->DefineSection(1, kHalfLengthEndCap); | |
213 | ||
214 | // The cone half shield is more complex since there is no basic | |
215 | // TGeo shape to describe it correctly. So it is made of a series | |
216 | // of TGeoArb8 shapes filled with air, which all together make up the | |
217 | // the cone AND its internal insert. Part of the following code is | |
218 | // adapted from SPDThermalSheald method. | |
219 | ||
220 | // Filled portions | |
221 | TGeoArb8 *sC1 = new TGeoArb8(kHalfLengthCone); | |
222 | TGeoArb8 *sC2 = new TGeoArb8(kHalfLengthCone); | |
223 | ||
224 | CreateSPDThermalShape(kInnerACentral,kInnerBCentral,kInnerRadiusCentral, | |
225 | kOuterACentral,kOuterBCentral,kOuterRadiusCentral, | |
226 | kTheta,xshld,yshld); | |
227 | ||
228 | sC1->SetVertex(0,xshld[12],yshld[12]); | |
229 | sC1->SetVertex(1,xshld[11],yshld[11]); | |
230 | sC1->SetVertex(2,xshld[ 0],yshld[ 0]); | |
231 | sC1->SetVertex(3,xshld[23],yshld[23]); | |
232 | ||
233 | sC2->SetVertex(0,xshld[11],yshld[11]); | |
234 | sC2->SetVertex(1,xshld[10],yshld[10]); | |
235 | sC2->SetVertex(2,xshld[ 1],yshld[ 1]); | |
236 | sC2->SetVertex(3,xshld[ 0],yshld[ 0]); | |
237 | ||
238 | // Drawings give only the radius, convert it to the apothegm | |
239 | Double_t kInnerRadiusCone = TMath::Sqrt(kInnerRadialCone*kInnerRadialCone | |
240 | - 0.25*kInnerACone*kInnerACone); | |
241 | Double_t kOuterRadiusCone = TMath::Sqrt(kOuterRadialCone*kOuterRadialCone | |
242 | - 0.25*kOuterACone*kOuterACone); | |
243 | ||
244 | Double_t xco[4], yco[4], xci[4], yci[4]; | |
245 | ||
246 | for (Int_t i=0; i<2; i++) { | |
247 | Double_t th = i*kTheta*TMath::RadToDeg(); | |
248 | xco[2*i ] = kOuterRadiusCone*SinD(th) - 0.5*kOuterACone*CosD(th); | |
249 | yco[2*i ] = kOuterRadiusCone*CosD(th) + 0.5*kOuterACone*SinD(th); | |
250 | xci[2*i ] = kInnerRadiusCone*SinD(th) - 0.5*kInnerACone*CosD(th); | |
251 | yci[2*i ] = kInnerRadiusCone*CosD(th) + 0.5*kInnerACone*SinD(th); | |
252 | xco[2*i+1] = kOuterRadiusCone*SinD(th) + 0.5*kOuterACone*CosD(th); | |
253 | yco[2*i+1] = kOuterRadiusCone*CosD(th) - 0.5*kOuterACone*SinD(th); | |
254 | xci[2*i+1] = kInnerRadiusCone*SinD(th) + 0.5*kInnerACone*CosD(th); | |
255 | yci[2*i+1] = kInnerRadiusCone*CosD(th) - 0.5*kInnerACone*SinD(th); | |
256 | } | |
257 | ||
258 | sC1->SetVertex(4,xco[0],yco[0]); | |
259 | sC1->SetVertex(5,xco[1],yco[1]); | |
260 | sC1->SetVertex(6,xci[1],yci[1]); | |
261 | sC1->SetVertex(7,xci[0],yci[0]); | |
262 | ||
263 | sC2->SetVertex(4,xco[1],yco[1]); | |
264 | sC2->SetVertex(5,xco[2],yco[2]); | |
265 | sC2->SetVertex(6,xci[2],yci[2]); | |
266 | sC2->SetVertex(7,xci[1],yci[1]); | |
267 | ||
268 | // Air holes | |
269 | TGeoArb8 *sCh1 = new TGeoArb8(kHalfLengthCone); | |
270 | TGeoArb8 *sCh2 = new TGeoArb8(kHalfLengthCone); | |
271 | ||
272 | for(Int_t i=0; i<4; i++){ | |
273 | InsidePoint(sC1->GetVertices()[((i+3)%4)*2+0], | |
274 | sC1->GetVertices()[((i+3)%4)*2+1], | |
275 | sC1->GetVertices()[i*2+0], | |
276 | sC1->GetVertices()[i*2+1], | |
277 | sC1->GetVertices()[((i+1)%4)*2+0], | |
278 | sC1->GetVertices()[((i+1)%4)*2+1],-kThicknessCone,x,y); | |
279 | sCh1->SetVertex(i,x,y); | |
280 | ||
281 | InsidePoint(sC1->GetVertices()[((i+3)%4 +4)*2+0], | |
282 | sC1->GetVertices()[((i+3)%4 +4)*2+1], | |
283 | sC1->GetVertices()[(i+4)*2+0], | |
284 | sC1->GetVertices()[(i+4)*2+1], | |
285 | sC1->GetVertices()[((i+1)%4 +4)*2+0], | |
286 | sC1->GetVertices()[((i+1)%4 +4)*2+1],-kThicknessCone,x,y); | |
287 | sCh1->SetVertex(i+4,x,y); | |
288 | ||
289 | InsidePoint(sC2->GetVertices()[((i+3)%4)*2+0], | |
290 | sC2->GetVertices()[((i+3)%4)*2+1], | |
291 | sC2->GetVertices()[i*2+0], | |
292 | sC2->GetVertices()[i*2+1], | |
293 | sC2->GetVertices()[((i+1)%4)*2+0], | |
294 | sC2->GetVertices()[((i+1)%4)*2+1],-kThicknessCone,x,y); | |
295 | sCh2->SetVertex(i,x,y); | |
296 | ||
297 | InsidePoint(sC2->GetVertices()[((i+3)%4 +4)*2+0], | |
298 | sC2->GetVertices()[((i+3)%4 +4)*2+1], | |
299 | sC2->GetVertices()[(i+4)*2+0], | |
300 | sC2->GetVertices()[(i+4)*2+1], | |
301 | sC2->GetVertices()[((i+1)%4 +4)*2+0], | |
302 | sC2->GetVertices()[((i+1)%4 +4)*2+1],-kThicknessCone,x,y); | |
303 | sCh2->SetVertex(i+4,x,y); | |
304 | } | |
305 | ||
306 | // Finally the carbon fiber Ring with its Wings and their | |
307 | // stesalite inserts. They are Tube and TubeSeg shapes | |
308 | ||
309 | TGeoTube *ringshape = new TGeoTube(kInnerRadiusRing,kOuterRadiusRing, | |
310 | kHalfLengthRing); | |
311 | ||
312 | TGeoTube *ringinsertshape = new TGeoTube(kInnerRadiusRing+kThicknessRing, | |
313 | kOuterRadiusRing-kThicknessRing, | |
314 | kHalfLengthRing-kThicknessRing); | |
315 | ||
316 | Double_t angleWideWing, angleWideWingThickness; | |
317 | angleWideWing = (kWideWing/kOuterRadiusWing)*TMath::RadToDeg(); | |
318 | angleWideWingThickness = (kThicknessRing/kOuterRadiusWing)*TMath::RadToDeg(); | |
319 | ||
320 | TGeoTubeSeg *wingshape = new TGeoTubeSeg(kOuterRadiusRing,kOuterRadiusWing, | |
321 | kHalfLengthRing, 0, angleWideWing); | |
322 | ||
323 | TGeoTubeSeg *winginsertshape = new TGeoTubeSeg(kOuterRadiusRing, | |
324 | kOuterRadiusWing-kThicknessRing, kHalfLengthRing-kThicknessRing, | |
325 | angleWideWingThickness, angleWideWing-angleWideWingThickness); | |
326 | ||
327 | ||
328 | // We have the shapes: now create the real volumes | |
329 | ||
330 | TGeoMedium *medSPDcf = mgr->GetMedium("ITS_SPD shield$"); | |
331 | TGeoMedium *medSPDair = mgr->GetMedium("ITS_SPD AIR$"); | |
332 | TGeoMedium *medSPDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite | |
333 | ||
334 | TGeoVolume *centralshield = new TGeoVolume("SPDcentralshield", | |
335 | centralshape,medSPDcf); | |
336 | centralshield->SetVisibility(kTRUE); | |
337 | centralshield->SetLineColor(7); | |
338 | centralshield->SetLineWidth(1); | |
339 | ||
340 | TGeoVolume *centralairshield = new TGeoVolume("SPDcentralairshield", | |
341 | centralairshape,medSPDair); | |
342 | centralairshield->SetVisibility(kTRUE); | |
343 | centralairshield->SetLineColor(5); // Yellow | |
344 | centralairshield->SetLineWidth(1); | |
345 | centralairshield->SetFillColor(centralairshield->GetLineColor()); | |
346 | centralairshield->SetFillStyle(4090); // 90% transparent | |
347 | ||
348 | TGeoVolume *centralomega = new TGeoVolume("SPDcentralomega", | |
349 | centralomegashape,medSPDcf); | |
350 | centralomega->SetVisibility(kTRUE); | |
351 | centralomega->SetLineColor(7); | |
352 | centralomega->SetLineWidth(1); | |
353 | ||
354 | centralairshield->AddNode(centralomega,1,0); | |
355 | centralshield->AddNode(centralairshield,1,0); | |
356 | ||
357 | TGeoVolume *endcapshield = new TGeoVolume("SPDendcapshield", | |
358 | endcapshape,medSPDcf); | |
359 | endcapshield->SetVisibility(kTRUE); | |
360 | endcapshield->SetLineColor(7); | |
361 | endcapshield->SetLineWidth(1); | |
362 | ||
363 | TGeoVolume *endcapairshield = new TGeoVolume("SPDendcapairshield", | |
364 | endcapairshape,medSPDair); | |
365 | endcapairshield->SetVisibility(kTRUE); | |
366 | endcapairshield->SetLineColor(5); // Yellow | |
367 | endcapairshield->SetLineWidth(1); | |
368 | endcapairshield->SetFillColor(endcapairshield->GetLineColor()); | |
369 | endcapairshield->SetFillStyle(4090); // 90% transparent | |
370 | ||
371 | TGeoVolume *endcapomega = new TGeoVolume("SPDendcapomega", | |
372 | endcapomegashape,medSPDcf); | |
373 | endcapomega->SetVisibility(kTRUE); | |
374 | endcapomega->SetLineColor(7); | |
375 | endcapomega->SetLineWidth(1); | |
376 | ||
377 | endcapairshield->AddNode(endcapomega,1,0); | |
378 | endcapshield->AddNode(endcapairshield,1,0); | |
379 | ||
380 | TGeoVolume *vC1 = new TGeoVolume("SPDconeshieldV1",sC1,medSPDcf); | |
381 | vC1->SetVisibility(kTRUE); | |
382 | vC1->SetLineColor(7); | |
383 | vC1->SetLineWidth(1); | |
384 | ||
385 | TGeoVolume *vCh1 = new TGeoVolume("SPDconeshieldH1",sCh1,medSPDair); | |
386 | ||
387 | vCh1->SetVisibility(kTRUE); | |
388 | vCh1->SetLineColor(5); // Yellow | |
389 | vCh1->SetLineWidth(1); | |
390 | vCh1->SetFillColor(vCh1->GetLineColor()); | |
391 | vCh1->SetFillStyle(4090); // 90% transparent | |
392 | ||
393 | vC1->AddNode(vCh1,1,0); | |
394 | ||
395 | TGeoVolume *vC2 = new TGeoVolume("SPDconeshieldV2",sC2,medSPDcf); | |
396 | ||
397 | vC2->SetVisibility(kTRUE); | |
398 | vC2->SetLineColor(7); | |
399 | vC2->SetLineWidth(1); | |
400 | ||
401 | TGeoVolume *vCh2 = new TGeoVolume("SPDconeshieldH2",sCh2,medSPDair); | |
402 | ||
403 | vCh2->SetVisibility(kTRUE); | |
404 | vCh2->SetLineColor(5); // Yellow | |
405 | vCh2->SetLineWidth(1); | |
406 | vCh2->SetFillColor(vCh2->GetLineColor()); | |
407 | vCh2->SetFillStyle(4090); // 90% transparent | |
408 | ||
409 | vC2->AddNode(vCh2,1,0); | |
410 | ||
411 | TGeoVolume *ring = new TGeoVolume("SPDshieldring",ringshape,medSPDcf); | |
412 | ring->SetVisibility(kTRUE); | |
413 | ring->SetLineColor(7); | |
414 | ring->SetLineWidth(1); | |
415 | ||
416 | TGeoVolume *ringinsert = new TGeoVolume("SPDshieldringinsert", | |
417 | ringinsertshape,medSPDste); | |
418 | ringinsert->SetVisibility(kTRUE); | |
419 | ringinsert->SetLineColor(3); // Green | |
420 | // ringinsert->SetLineWidth(1); | |
421 | ringinsert->SetFillColor(ringinsert->GetLineColor()); | |
422 | ringinsert->SetFillStyle(4010); // 10% transparent | |
423 | ||
424 | ring->AddNode(ringinsert,1,0); | |
425 | ||
426 | TGeoVolume *wing = new TGeoVolume("SPDshieldringwing",wingshape,medSPDcf); | |
427 | wing->SetVisibility(kTRUE); | |
428 | wing->SetLineColor(7); | |
429 | wing->SetLineWidth(1); | |
430 | ||
431 | TGeoVolume *winginsert = new TGeoVolume("SPDshieldringinsert", | |
432 | winginsertshape,medSPDste); | |
433 | winginsert->SetVisibility(kTRUE); | |
434 | winginsert->SetLineColor(3); // Green | |
435 | // winginsert->SetLineWidth(1); | |
436 | winginsert->SetFillColor(winginsert->GetLineColor()); | |
437 | winginsert->SetFillStyle(4010); // 10% transparent | |
438 | ||
439 | wing->AddNode(winginsert,1,0); | |
440 | ||
441 | ||
442 | // Add all volumes in the assembly | |
443 | vM->AddNode(centralshield,1,0); | |
444 | vM->AddNode(centralshield,2,new TGeoRotation("",180,0,0)); | |
445 | ||
446 | vM->AddNode(endcapshield,1, | |
447 | new TGeoTranslation(0,0, kHalfLengthCentral+kHalfLengthEndCap)); | |
448 | vM->AddNode(endcapshield,2, | |
449 | new TGeoTranslation(0,0,-kHalfLengthCentral-kHalfLengthEndCap)); | |
450 | vM->AddNode(endcapshield,3,new TGeoCombiTrans( | |
451 | 0, 0, kHalfLengthCentral+kHalfLengthEndCap, | |
452 | new TGeoRotation("",180,0,0) ) ); | |
453 | vM->AddNode(endcapshield,4,new TGeoCombiTrans( | |
454 | 0, 0,-kHalfLengthCentral-kHalfLengthEndCap, | |
455 | new TGeoRotation("",180,0,0) ) ); | |
456 | ||
457 | for (Int_t i=0; i<10; i++) { | |
458 | Double_t thetaC12 = kTheta*TMath::RadToDeg(); | |
459 | vM->AddNode(vC1,2*i+1, new TGeoCombiTrans( | |
460 | 0, 0, kHalfLengthCentral+2*kHalfLengthEndCap+kHalfLengthCone, | |
461 | new TGeoRotation("",0, 0,i*thetaC12) ) ); | |
462 | vM->AddNode(vC1,2*i+2, new TGeoCombiTrans( | |
463 | 0, 0, -kHalfLengthCentral-2*kHalfLengthEndCap-kHalfLengthCone, | |
464 | new TGeoRotation("",0,180,i*thetaC12) ) ); | |
465 | vM->AddNode(vC2,2*i+1, new TGeoCombiTrans( | |
466 | 0, 0, kHalfLengthCentral+2*kHalfLengthEndCap+kHalfLengthCone, | |
467 | new TGeoRotation("",0, 0,i*thetaC12) ) ); | |
468 | vM->AddNode(vC2,2*i+2, new TGeoCombiTrans( | |
469 | 0, 0, -kHalfLengthCentral-2*kHalfLengthEndCap-kHalfLengthCone, | |
470 | new TGeoRotation("",0,180,i*thetaC12) ) ); | |
471 | } | |
472 | ||
473 | vM->AddNode(ring,1,new TGeoTranslation(0, 0, | |
474 | kHalfLengthCentral+2*kHalfLengthEndCap+2*kHalfLengthCone | |
475 | +kHalfLengthRing)); | |
476 | vM->AddNode(ring,2,new TGeoTranslation(0, 0, | |
477 | -kHalfLengthCentral-2*kHalfLengthEndCap-2*kHalfLengthCone | |
478 | -kHalfLengthRing)); | |
479 | ||
0b9c8a10 | 480 | for (Int_t i=0; i<4; i++) { |
481 | Double_t thetaW = kThetaWing*(2*i+1) - angleWideWing/2.; | |
482 | vM->AddNode(wing,2*i+1,new TGeoCombiTrans(0, 0, | |
a275e8ba | 483 | kHalfLengthCentral+2*kHalfLengthEndCap+2*kHalfLengthCone |
484 | +kHalfLengthRing, new TGeoRotation("",thetaW,0,0) )); | |
0b9c8a10 | 485 | vM->AddNode(wing,2*i+2,new TGeoCombiTrans(0, 0, |
a275e8ba | 486 | -kHalfLengthCentral-2*kHalfLengthEndCap-2*kHalfLengthCone |
487 | -kHalfLengthRing, new TGeoRotation("",thetaW,0,0) )); | |
488 | } | |
489 | ||
490 | // Some debugging if requested | |
491 | if(GetDebug(1)){ | |
492 | vM->PrintNodes(); | |
493 | vM->InspectShape(); | |
494 | } | |
495 | ||
496 | // Finally put the entire shield in the mother volume | |
497 | moth->AddNode(vM,1,0); | |
498 | ||
499 | return; | |
500 | } | |
501 | ||
502 | //______________________________________________________________________ | |
503 | void AliITSv11GeometrySupport::CreateSPDThermalShape( | |
504 | Double_t ina, Double_t inb, Double_t inr, | |
505 | Double_t oua, Double_t oub, Double_t our, | |
43aefea7 | 506 | Double_t t, Double_t *x , Double_t *y ) const |
a275e8ba | 507 | { |
508 | // | |
509 | // Creates the proper sequence of X and Y coordinates to determine | |
510 | // the base XTru polygon for the SPD thermal shapes | |
511 | // | |
512 | // Input: | |
513 | // ina, inb : inner shape sides | |
514 | // inr : inner radius | |
515 | // oua, oub : outer shape sides | |
516 | // our : outer radius | |
517 | // t : theta angle | |
518 | // | |
519 | // Output: | |
520 | // x, y : coordinate vectors [24] | |
521 | // | |
522 | // Created: 14 Nov 2007 Mario Sitta | |
523 | // Updated: 11 Dec 2007 Mario Sitta | |
524 | // | |
525 | Double_t xlocal[6],ylocal[6]; | |
526 | ||
527 | //Create the first inner quadrant (X > 0) | |
528 | FillSPDXtruShape(ina,inb,inr,t,xlocal,ylocal); | |
529 | for (Int_t i=0; i<6; i++) { | |
530 | x[i] = xlocal[i]; | |
531 | y[i] = ylocal[i]; | |
532 | } | |
533 | ||
534 | // Then reflex on the second quadrant (X < 0) | |
535 | for (Int_t i=0; i<6; i++) { | |
536 | x[23-i] = -x[i]; | |
537 | y[23-i] = y[i]; | |
538 | } | |
539 | ||
540 | // Now create the first outer quadrant (X > 0) | |
541 | FillSPDXtruShape(oua,oub,our,t,xlocal,ylocal); | |
542 | for (Int_t i=0; i<6; i++) { | |
543 | x[11-i] = xlocal[i]; | |
544 | y[11-i] = ylocal[i]; | |
545 | } | |
546 | ||
547 | // Finally reflex on the second quadrant (X < 0) | |
548 | for (Int_t i=0; i<6; i++) { | |
549 | x[12+i] = -x[11-i]; | |
550 | y[12+i] = y[11-i]; | |
551 | } | |
552 | ||
553 | return; | |
554 | } | |
555 | ||
556 | //______________________________________________________________________ | |
557 | void AliITSv11GeometrySupport::CreateSPDOmegaShape( | |
21ea473f | 558 | const Double_t *xin, const Double_t *yin, Double_t d, |
559 | Double_t *x, Double_t *y) | |
a275e8ba | 560 | { |
561 | // | |
562 | // Creates the proper sequence of X and Y coordinates to determine | |
563 | // the SPD Omega XTru polygon | |
564 | // | |
565 | // Input: | |
566 | // xin, yin : coordinates of the air volume | |
567 | // d : Omega shape thickness | |
568 | // t : theta angle | |
569 | // | |
570 | // Output: | |
571 | // x, y : coordinate vectors [48] | |
572 | // | |
573 | // Created: 17 Nov 2007 Mario Sitta | |
574 | // Updated: 11 Dec 2007 Mario Sitta | |
3d2705b6 | 575 | // Updated: 20 Feb 2009 Mario Sitta New algorithm (the old one |
576 | // gives erroneous vertexes) | |
a275e8ba | 577 | // |
a275e8ba | 578 | |
3d2705b6 | 579 | // This vector contains the index of those points which coincide |
580 | // with the corresponding points in the air shape | |
581 | Int_t indexAir2Omega[12] = {1, 2, 5, 6, 9, 10, 11, 15, 16, 19, 20, 23}; | |
a275e8ba | 582 | |
3d2705b6 | 583 | // First fill those vertexes corresponding to |
584 | // the edges aligned to the air shape edges | |
585 | for (Int_t j=0; j<12; j++) { | |
586 | x[*(indexAir2Omega+j)] = xin[j]; | |
587 | y[*(indexAir2Omega+j)] = yin[j]; | |
588 | } | |
a275e8ba | 589 | |
3d2705b6 | 590 | // Now get the coordinates of the first inner point |
591 | PointFromParallelLines(x[23],y[23],x[1],y[1],d,x[0],y[0]); | |
a275e8ba | 592 | |
3d2705b6 | 593 | // Knowing this, the second internal point can be determined |
594 | InsidePoint(x[0],y[0],x[1],y[1],x[2],y[2],d,x[22],y[22]); | |
a275e8ba | 595 | |
3d2705b6 | 596 | // The third point is now computable |
597 | ReflectPoint(x[1],y[1],x[2],y[2],x[22],y[22],x[21],y[21]); | |
a275e8ba | 598 | |
3d2705b6 | 599 | // Repeat this logic |
600 | InsidePoint(x[21],y[21],x[20],y[20],x[19],y[19],-d,x[3],y[3]); | |
a275e8ba | 601 | |
3d2705b6 | 602 | ReflectPoint(x[20],y[20],x[19],y[19],x[3],y[3],x[4],y[4]); |
a275e8ba | 603 | |
3d2705b6 | 604 | InsidePoint(x[4],y[4],x[5],y[5],x[6],y[6],d,x[18],y[18]); |
a275e8ba | 605 | |
3d2705b6 | 606 | ReflectPoint(x[5],y[5],x[6],y[6],x[18],y[18],x[17],y[17]); |
a275e8ba | 607 | |
3d2705b6 | 608 | InsidePoint(x[17],y[17],x[16],y[16],x[15],y[15],-d,x[7],y[7]); |
a275e8ba | 609 | |
3d2705b6 | 610 | ReflectPoint(x[16],y[16],x[15],y[15],x[7],y[7],x[8],y[8]); |
a275e8ba | 611 | |
3d2705b6 | 612 | InsidePoint(x[8],y[8],x[9],y[9],x[10],y[10],d,x[14],y[14]); |
a275e8ba | 613 | |
614 | // These need to be fixed explicitly | |
a275e8ba | 615 | x[12] = x[11]; |
616 | y[12] = y[11] + d; | |
617 | x[13] = x[10] + d; | |
618 | y[13] = y[12]; | |
619 | ||
3d2705b6 | 620 | // Finally reflect on the negative side |
a275e8ba | 621 | for (Int_t i=0; i<24; i++) { |
622 | x[24+i] = -x[23-i]; | |
623 | y[24+i] = y[23-i]; | |
624 | } | |
625 | ||
626 | // Wow ! We've finished | |
627 | return; | |
172b0d90 | 628 | } |
a275e8ba | 629 | |
172b0d90 | 630 | //______________________________________________________________________ |
a275e8ba | 631 | void AliITSv11GeometrySupport::FillSPDXtruShape(Double_t a, Double_t b, |
632 | Double_t r, Double_t t, | |
21ea473f | 633 | Double_t *x, Double_t *y) const |
a275e8ba | 634 | { |
635 | // | |
636 | // Creates the partial sequence of X and Y coordinates to determine | |
637 | // the lateral part of the SPD thermal shield | |
638 | // | |
639 | // Input: | |
640 | // a, b : shape sides | |
641 | // r : radius | |
642 | // t : theta angle | |
643 | // | |
644 | // Output: | |
645 | // x, y : coordinate vectors [6] | |
646 | // | |
647 | // Created: 14 Nov 2007 Mario Sitta | |
648 | // | |
649 | x[0] = a/2; | |
650 | y[0] = r; | |
651 | ||
652 | x[1] = x[0] + b * TMath::Cos(t/2); | |
653 | y[1] = y[0] - b * TMath::Sin(t/2); | |
654 | ||
655 | x[2] = x[1] + a * TMath::Cos(t); | |
656 | y[2] = y[1] - a * TMath::Sin(t); | |
657 | ||
658 | x[3] = x[2] + b * TMath::Cos(3*t/2); | |
659 | y[3] = y[2] - b * TMath::Sin(3*t/2); | |
660 | ||
661 | x[4] = x[3] + a * TMath::Cos(2*t); | |
662 | y[4] = y[3] - a * TMath::Sin(2*t); | |
663 | ||
664 | x[5] = x[4]; | |
665 | y[5] = 0.; | |
666 | ||
667 | return; | |
172b0d90 | 668 | } |
a275e8ba | 669 | |
3d2705b6 | 670 | //______________________________________________________________________ |
671 | void AliITSv11GeometrySupport::PointFromParallelLines(Double_t x1, Double_t y1, | |
672 | Double_t x2, Double_t y2, Double_t d, | |
21ea473f | 673 | Double_t &x, Double_t &y) const |
3d2705b6 | 674 | { |
675 | // | |
676 | // Determines the X and Y of the first internal point of the Omega shape | |
677 | // (i.e. the coordinates of a point given two parallel lines passing by | |
678 | // two points and placed at a known distance) | |
679 | // | |
680 | // Input: | |
681 | // x1, y1 : first point | |
682 | // x2, y2 : second point | |
683 | // d : distance between the two lines | |
684 | // | |
685 | // Output: | |
686 | // x, y : coordinate of the point | |
687 | // | |
688 | // Created: 22 Feb 2009 Mario Sitta | |
689 | // | |
690 | //Begin_Html | |
691 | /* | |
692 | <img src="ITS/doc/PointFromParallelLines.gif"> | |
693 | */ | |
694 | //End_Html | |
695 | ||
696 | // The slope of the paralles lines at a distance d | |
697 | Double_t m; | |
698 | ||
699 | // The parameters of the solving equation | |
700 | // a x^2 - 2 b x + c = 0 | |
701 | Double_t a = (x1 - x2)*(x1 - x2) - d*d; | |
702 | Double_t b = (x1 - x2)*(y1 - y2); | |
703 | Double_t c = (y1 - y2)*(y1 - y2) - d*d; | |
704 | ||
21ea473f | 705 | // (delta4 is Delta/4 because we use the reduced formula) |
706 | Double_t delta4 = b*b - a*c; | |
3d2705b6 | 707 | |
708 | // Compute the slope of the two parallel lines | |
709 | // (one of the two possible slopes, the one with the smaller | |
710 | // absolute value is needed) | |
21ea473f | 711 | if (delta4 < 0) { // Should never happen with our data, but just to be sure |
3d2705b6 | 712 | x = -1; // x is expected positive, so this flags an error |
713 | return; | |
714 | } else | |
21ea473f | 715 | m = (b + TMath::Sqrt(delta4))/a; // b is negative with our data |
3d2705b6 | 716 | |
717 | // Finally compute the coordinates of the point | |
718 | x = x2 + (y1 - y2 - d)/m; | |
719 | y = y1 - d; | |
720 | ||
721 | // Done | |
722 | return; | |
723 | } | |
724 | ||
725 | //______________________________________________________________________ | |
726 | void AliITSv11GeometrySupport::ReflectPoint(Double_t x1, Double_t y1, | |
727 | Double_t x2, Double_t y2, | |
728 | Double_t x3, Double_t y3, | |
21ea473f | 729 | Double_t &x, Double_t &y) const |
3d2705b6 | 730 | { |
731 | // | |
732 | // Given two points (x1,y1) and (x2,y2), determines the point (x,y) | |
733 | // lying on the line parallel to the line passing by these points, | |
734 | // at a distance d and passing by the point (x3,y3), which is symmetric to | |
735 | // the third point with respect to the axis of the segment delimited by | |
736 | // the two first points. | |
737 | // | |
738 | // Input: | |
739 | // x1, y1 : first point | |
740 | // x2, y2 : second point | |
741 | // x3, y3 : third point | |
742 | // d : distance between the two lines | |
743 | // | |
744 | // Output: | |
745 | // x, y : coordinate of the reflected point | |
746 | // | |
747 | // Created: 22 Feb 2009 Mario Sitta | |
748 | // | |
749 | //Begin_Html | |
750 | /* | |
751 | <img src="ITS/doc/ReflectPoint.gif"> | |
752 | */ | |
753 | //End_Html | |
754 | ||
755 | // The slope of the line passing by the first two points | |
756 | Double_t k = (y2 - y1)/(x2 - x1); | |
757 | ||
758 | // The middle point of the segment 1-2 | |
759 | Double_t xK = (x1 + x2)/2.; | |
760 | Double_t yK = (y1 + y2)/2.; | |
761 | ||
762 | // The intercept between the axis of the segment 1-2 and the line | |
763 | // passing by 3 and parallel to the line passing by 1-2 | |
764 | Double_t xH = (k*k*x3 + k*(yK - y3) + xK)/(k*k + 1); | |
765 | Double_t yH = k*(xH - x3) + y3; | |
766 | ||
767 | // The point symmetric to 3 with respect to H | |
768 | x = 2*xH - x3; | |
769 | y = 2*yH - y3; | |
770 | ||
771 | // Done | |
772 | return; | |
773 | } | |
774 | ||
172b0d90 | 775 | //______________________________________________________________________ |
43aefea7 | 776 | void AliITSv11GeometrySupport::SDDCone(TGeoVolume *moth,const TGeoManager *mgr) |
7d6c23de | 777 | { |
778 | // | |
779 | // Creates the SDD support cone and cylinder geometry as a | |
780 | // volume assembly and adds it to the mother volume | |
781 | // (part of this code is taken or anyway inspired to SDDCone method | |
782 | // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
783 | // | |
784 | // Input: | |
785 | // moth : the TGeoVolume owing the volume structure | |
786 | // mgr : the GeoManager (default gGeoManager) | |
787 | // Output: | |
788 | // | |
789 | // Created: ??? Bjorn S. Nilsen | |
790 | // Updated: 18 Feb 2008 Mario Sitta | |
6b99a08f | 791 | // Updated: 25 Jul 2008 Mario Sitta SDDCarbonFiberCone simpler |
96eb8210 | 792 | // Updated: 10 Jun 2010 Mario Sitta Cables across cone holes added |
7d6c23de | 793 | // |
794 | // Technical data are taken from: "Supporto Generale Settore SDD" | |
795 | // (technical drawings ALR-0816/1-B), "Supporto Globale Settore SDD" | |
796 | // (technical drawings ALR-0816/2A, ALR-0816/2B, ALR-0816/2C, ALR-0816/2D), | |
797 | // private communication with B. Giraudo | |
798 | ||
799 | // Dimensions of the Central cylinder and flanges | |
800 | const Double_t kCylinderHalfLength = (790.0/2)*fgkmm; | |
801 | const Double_t kCylinderInnerR = (210.0/2)*fgkmm; | |
802 | const Double_t kCylinderOuterR = (231.0/2)*fgkmm; | |
803 | const Double_t kFlangeHalfLength = ( 15.0/2)*fgkmm; | |
804 | const Double_t kFlangeInnerR = (210.5/2)*fgkmm; | |
805 | const Double_t kFlangeOuterR = (230.5/2)*fgkmm; | |
806 | const Double_t kInsertoHalfLength = | |
807 | kCylinderHalfLength - 2*kFlangeHalfLength; | |
808 | // const Double_t kCFThickness = kFlangeInnerR - kCylinderInnerR; | |
809 | const Double_t kBoltDiameter = 6.0*fgkmm; // M6 screw | |
810 | const Double_t kBoltDepth = 6.0*fgkmm; // In the flange | |
811 | const Double_t kBoltRadius = (220.0/2)*fgkmm; // Radius in flange | |
812 | const Double_t kThetaBolt = 30.0*fgkDegree; | |
813 | const Int_t kNBolts = (Int_t)(360.0/kThetaBolt); | |
814 | // Dimensions of the Cone | |
815 | const Double_t kConeROutMin = (540.0/2)*fgkmm; | |
816 | const Double_t kConeROutMax = (560.0/2)*fgkmm; | |
3a299c65 | 817 | const Double_t kConeRCurv = 10.0*fgkmm; // Radius of curvature |
7d6c23de | 818 | const Double_t kConeRinMin = (210.0/2)*fgkmm; |
6b99a08f | 819 | // const Double_t kConeRinMax = (216.0/2)*fgkmm; |
7d6c23de | 820 | const Double_t kConeRinCylinder = (231.0/2)*fgkmm; |
3a299c65 | 821 | const Double_t kConeZCylinder = 192.0*fgkmm; |
7d6c23de | 822 | const Double_t kConeZOuterMilled = 23.0*fgkmm; |
823 | const Double_t kConeDZin = 15.0*fgkmm; // ??? | |
3a299c65 | 824 | const Double_t kConeThickness = 10.0*fgkmm; // Rohacell + Carb.Fib. |
7d6c23de | 825 | const Double_t kConeTheta = 45.0*fgkDegree; // SDD cone angle |
826 | const Double_t kSinConeTheta = | |
827 | TMath::Sin(kConeTheta*TMath::DegToRad()); | |
828 | const Double_t kCosConeTheta = | |
829 | TMath::Cos(kConeTheta*TMath::DegToRad()); | |
830 | const Double_t kTanConeTheta = | |
831 | TMath::Tan(kConeTheta*TMath::DegToRad()); | |
832 | // Dimensions of the Cone Inserts | |
96eb8210 | 833 | const Double_t kConeCFThickness = 1.5*fgkmm;//Carbon fiber thickness |
7d6c23de | 834 | // Dimensions of the Cone Holes |
835 | const Double_t kHole1RMin = (450.0/2)*fgkmm; | |
3a299c65 | 836 | const Double_t kHole1RMax = (530.0/2)*fgkmm; |
7d6c23de | 837 | const Double_t kHole2RMin = (280.0/2)*fgkmm; |
838 | const Double_t kHole2RMax = (375.0/2)*fgkmm; | |
839 | const Double_t kHole1Phi = 25.0*fgkDegree; | |
840 | const Double_t kHole2Phi = 50.0*fgkDegree; | |
841 | const Double_t kHole3RMin = 205.0*fgkmm; | |
842 | const Double_t kHole3DeltaR = 15*fgkmm; | |
843 | const Double_t kHole3Width = 30*fgkmm; | |
844 | const Int_t kNHole3 = 6 ; | |
845 | const Double_t kHole4RMin = 116.0*fgkmm; | |
846 | const Double_t kHole4DeltaR = 15*fgkmm; | |
3a299c65 | 847 | const Double_t kHole4Width = 30*fgkmm; |
848 | // const Int_t kNHole4 = 3 ; | |
96eb8210 | 849 | // Fraction of materials in holes |
850 | const Double_t kHolePlasticFrac = 0.55846; | |
851 | const Double_t kHoleCuFrac = 0.06319; | |
852 | const Double_t kHoleGlassFrac = 0.02652; | |
7d6c23de | 853 | |
854 | // Local variables | |
855 | Double_t x, y, z, t, dza, rmin, rmax; | |
856 | ||
857 | ||
7d6c23de | 858 | // Recover the needed materials |
96eb8210 | 859 | TGeoMedium *medSDDcf = mgr->GetMedium("ITS_SDD C (M55J)$"); |
860 | TGeoMedium *medSDDair = mgr->GetMedium("ITS_SDD AIR$"); | |
861 | TGeoMedium *medSDDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite | |
862 | TGeoMedium *medSDDroh = mgr->GetMedium("ITS_ROHACELL$"); | |
863 | TGeoMedium *medSDDss = mgr->GetMedium("ITS_INOX$"); | |
864 | TGeoMedium *medSDDplast = mgr->GetMedium("ITS_SDDKAPTON (POLYCH2)$"); | |
865 | TGeoMedium *medSDDCu = mgr->GetMedium("ITS_COPPER$"); | |
866 | TGeoMedium *medSDDglass = mgr->GetMedium("ITS_SDD OPTICFIB$"); | |
7d6c23de | 867 | |
868 | // First define the geometrical shapes | |
869 | ||
870 | // Central cylinder with its internal foam and the lateral flanges: | |
871 | // a carbon fiber Tube which contains a rohacell Tube and two | |
872 | // stesalite Tube's | |
873 | TGeoTube *cylindershape = new TGeoTube(kCylinderInnerR,kCylinderOuterR, | |
874 | kCylinderHalfLength); | |
875 | ||
876 | TGeoTube *insertoshape = new TGeoTube(kFlangeInnerR,kFlangeOuterR, | |
877 | kInsertoHalfLength); | |
878 | ||
879 | TGeoTube *flangeshape = new TGeoTube(kFlangeInnerR,kFlangeOuterR, | |
880 | kFlangeHalfLength); | |
881 | ||
882 | // The flange bolt: it is a Tube | |
883 | TGeoTube *boltshape = new TGeoTube(0.0, 0.5*kBoltDiameter, 0.5*kBoltDepth); | |
884 | ||
885 | // Debug if requested | |
886 | if (GetDebug(1)) { | |
887 | cylindershape->InspectShape(); | |
888 | insertoshape->InspectShape(); | |
889 | flangeshape->InspectShape(); | |
890 | boltshape->InspectShape(); | |
891 | } | |
892 | ||
893 | ||
894 | // We have the shapes: now create the real volumes | |
895 | ||
896 | TGeoVolume *cfcylinder = new TGeoVolume("SDDCarbonFiberCylinder", | |
897 | cylindershape,medSDDcf); | |
898 | cfcylinder->SetVisibility(kTRUE); | |
899 | cfcylinder->SetLineColor(4); // Blue | |
900 | cfcylinder->SetLineWidth(1); | |
901 | cfcylinder->SetFillColor(cfcylinder->GetLineColor()); | |
902 | cfcylinder->SetFillStyle(4000); // 0% transparent | |
903 | ||
904 | TGeoVolume *foamcylinder = new TGeoVolume("SDDFoamCylinder", | |
905 | insertoshape,medSDDroh); | |
906 | foamcylinder->SetVisibility(kTRUE); | |
907 | foamcylinder->SetLineColor(3); // Green | |
908 | foamcylinder->SetLineWidth(1); | |
909 | foamcylinder->SetFillColor(foamcylinder->GetLineColor()); | |
910 | foamcylinder->SetFillStyle(4050); // 50% transparent | |
911 | ||
912 | TGeoVolume *flangecylinder = new TGeoVolume("SDDFlangeCylinder", | |
913 | flangeshape,medSDDste); | |
914 | flangecylinder->SetVisibility(kTRUE); | |
915 | flangecylinder->SetLineColor(2); // Red | |
916 | flangecylinder->SetLineWidth(1); | |
917 | flangecylinder->SetFillColor(flangecylinder->GetLineColor()); | |
918 | flangecylinder->SetFillStyle(4050); // 50% transparent | |
919 | ||
920 | TGeoVolume *bolt = new TGeoVolume("SDDFlangeBolt",boltshape,medSDDss); | |
921 | bolt->SetVisibility(kTRUE); | |
922 | bolt->SetLineColor(1); // Black | |
923 | bolt->SetLineWidth(1); | |
924 | bolt->SetFillColor(bolt->GetLineColor()); | |
925 | bolt->SetFillStyle(4050); // 50% transparent | |
926 | ||
927 | // Mount up the cylinder | |
928 | for(Int_t i=0; i<kNBolts; i++){ | |
929 | t = kThetaBolt*i; | |
aa177c73 | 930 | x = kBoltRadius*CosD(t); |
931 | y = kBoltRadius*SinD(t); | |
7d6c23de | 932 | z = kFlangeHalfLength-kBoltDepth; |
933 | flangecylinder->AddNode(bolt, i+1, new TGeoTranslation("",x,y,z)); | |
934 | } | |
935 | ||
936 | cfcylinder->AddNode(foamcylinder,1,0); | |
937 | cfcylinder->AddNode(flangecylinder,1, | |
938 | new TGeoTranslation(0, 0, kInsertoHalfLength+kFlangeHalfLength)); | |
939 | cfcylinder->AddNode(flangecylinder,2,new TGeoCombiTrans( | |
940 | 0, 0, -kInsertoHalfLength-kFlangeHalfLength, | |
941 | new TGeoRotation("",0,180,0) ) ); | |
942 | ||
943 | ||
944 | // SDD Support Cone with its internal inserts: a carbon fiber Pcon | |
945 | // with holes which contains a stesalite Pcon which on turn contains a | |
946 | // rohacell Pcon | |
947 | ||
948 | dza = kConeThickness/kSinConeTheta-(kConeROutMax-kConeROutMin)/kTanConeTheta; | |
949 | ||
6b99a08f | 950 | TGeoPcon *coneshape = new TGeoPcon(0.0, 360.0, 10); |
7d6c23de | 951 | |
952 | coneshape->Z(0) = 0.0; | |
953 | coneshape->Rmin(0) = kConeROutMin; | |
954 | coneshape->Rmax(0) = kConeROutMax; | |
955 | ||
956 | coneshape->Z(1) = kConeZOuterMilled - dza; | |
957 | coneshape->Rmin(1) = coneshape->GetRmin(0); | |
958 | coneshape->Rmax(1) = coneshape->GetRmax(0); | |
959 | ||
960 | coneshape->Z(2) = kConeZOuterMilled; | |
961 | coneshape->Rmax(2) = coneshape->GetRmax(0); | |
962 | ||
963 | RadiusOfCurvature(kConeRCurv,0.,coneshape->GetZ(1), | |
964 | coneshape->GetRmin(1),kConeTheta,z,rmin); | |
965 | coneshape->Z(3) = z; | |
966 | coneshape->Rmin(3) = rmin; | |
967 | ||
968 | coneshape->Rmin(2) = RminFrom2Points(coneshape,3,1,coneshape->GetZ(2)); | |
969 | ||
970 | RadiusOfCurvature(kConeRCurv,0.,coneshape->GetZ(2), | |
971 | coneshape->GetRmax(2),kConeTheta,z,rmax); | |
972 | coneshape->Z(4) = z; | |
973 | coneshape->Rmax(4) = rmax; | |
974 | coneshape->Rmin(4) = RminFromZpCone(coneshape,3,kConeTheta, | |
975 | coneshape->GetZ(4),0.0); | |
976 | ||
977 | coneshape->Rmax(3) = RmaxFrom2Points(coneshape,4,2,coneshape->GetZ(3)); | |
978 | ||
6b99a08f | 979 | coneshape->Z(6) = kConeZCylinder - kConeDZin; |
980 | ||
981 | RadiusOfCurvature(kConeRCurv,90.0,coneshape->GetZ(6),0.0, | |
982 | 90.0-kConeTheta,z,rmin); | |
983 | coneshape->Z(5) = z; | |
984 | coneshape->Rmin(5) = RminFromZpCone(coneshape,3,kConeTheta,z); | |
985 | coneshape->Rmax(5) = RmaxFromZpCone(coneshape,4,kConeTheta,z); | |
986 | ||
987 | RadiusOfCurvature(kConeRCurv,90.-kConeTheta, | |
988 | 0.0,coneshape->Rmin(5),90.0,z,rmin); | |
989 | coneshape->Rmin(6) = rmin; | |
990 | coneshape->Rmax(6) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
991 | coneshape->GetZ(6)); | |
992 | ||
993 | coneshape->Z(7) = coneshape->GetZ(6); | |
7d6c23de | 994 | coneshape->Rmin(7) = kConeRinMin; |
6b99a08f | 995 | coneshape->Rmax(7) = coneshape->GetRmax(6); |
7d6c23de | 996 | |
997 | coneshape->Rmin(8) = kConeRinMin; | |
998 | ||
6b99a08f | 999 | RadiusOfCurvature(kConeRCurv,90.0,kConeZCylinder,kConeRinCylinder, |
1000 | 90.0-kConeTheta,z,rmax); | |
1001 | coneshape->Z(8) = z; | |
7d6c23de | 1002 | coneshape->Rmax(8) = rmax; |
7d6c23de | 1003 | |
1004 | coneshape->Z(9) = kConeZCylinder; | |
1005 | coneshape->Rmin(9) = kConeRinMin; | |
6b99a08f | 1006 | coneshape->Rmax(9) = kConeRinCylinder; |
7d6c23de | 1007 | |
7d6c23de | 1008 | |
1009 | // SDD Cone Insert: another Pcon | |
1010 | Double_t x0, y0, x1, y1, x2, y2; | |
1011 | TGeoPcon *coneinsertshape = new TGeoPcon(0.0, 360.0, 9); | |
1012 | ||
1013 | coneinsertshape->Z(0) = coneshape->GetZ(0) + kConeCFThickness; | |
1014 | coneinsertshape->Rmin(0) = coneshape->GetRmin(0) + kConeCFThickness; | |
1015 | coneinsertshape->Rmax(0) = coneshape->GetRmax(0) - kConeCFThickness; | |
1016 | ||
1017 | x0 = coneshape->GetZ(0); y0 = coneshape->GetRmin(0); | |
1018 | x1 = coneshape->GetZ(1); y1 = coneshape->GetRmin(1); | |
1019 | x2 = coneshape->GetZ(2); y2 = coneshape->GetRmin(2); | |
1020 | InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin); | |
1021 | coneinsertshape->Z(1) = z; | |
1022 | coneinsertshape->Rmin(1) = rmin; | |
1023 | coneinsertshape->Rmax(1) = coneinsertshape->GetRmax(0); | |
1024 | ||
1025 | x0 = coneshape->GetZ(1); y0 = coneshape->GetRmax(1); | |
1026 | x1 = coneshape->GetZ(2); y1 = coneshape->GetRmax(2); | |
1027 | x2 = coneshape->GetZ(3); y2 = coneshape->GetRmax(3); | |
1028 | InsidePoint(x0, y0, x1, y1, x2, y2, -kConeCFThickness, z, rmax); | |
1029 | coneinsertshape->Z(2) = z; | |
1030 | coneinsertshape->Rmax(2) = rmax; | |
1031 | ||
1032 | x0 = coneshape->GetZ(2); y0 = coneshape->GetRmin(2); | |
1033 | x1 = coneshape->GetZ(3); y1 = coneshape->GetRmin(3); | |
1034 | x2 = coneshape->GetZ(4); y2 = coneshape->GetRmin(4); | |
1035 | InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin); | |
1036 | coneinsertshape->Z(3) = z; | |
1037 | coneinsertshape->Rmin(3) = rmin; | |
1038 | ||
1039 | x0 = coneinsertshape->GetZ(1); y0 = coneinsertshape->GetRmin(1); | |
1040 | x1 = coneinsertshape->GetZ(3); y1 = coneinsertshape->GetRmin(3); | |
1041 | coneinsertshape->Rmin(2) = Yfrom2Points(x0, y0, x1, y1, | |
1042 | coneinsertshape->Z(2)); | |
1043 | ||
1044 | x0 = coneshape->GetZ(3); y0 = coneshape->GetRmax(3); | |
1045 | x1 = coneshape->GetZ(4); y1 = coneshape->GetRmax(4); | |
1046 | x2 = coneshape->GetZ(5); y2 = coneshape->GetRmax(5); | |
1047 | InsidePoint(x0, y0, x1, y1, x2, y2, -kConeCFThickness, z, rmax); | |
1048 | coneinsertshape->Z(4) = z; | |
1049 | coneinsertshape->Rmax(4) = rmax; | |
1050 | ||
1051 | x0 = coneinsertshape->GetZ(2); y0 = coneinsertshape->GetRmax(2); | |
1052 | x1 = coneinsertshape->GetZ(4); y1 = coneinsertshape->GetRmax(4); | |
1053 | coneinsertshape->Rmax(3) = Yfrom2Points(x0, y0, x1, y1, | |
1054 | coneinsertshape->Z(3)); | |
1055 | ||
1056 | x0 = coneshape->GetZ(4); y0 = coneshape->GetRmin(4); | |
1057 | x1 = coneshape->GetZ(5); y1 = coneshape->GetRmin(5); | |
1058 | x2 = coneshape->GetZ(6); y2 = coneshape->GetRmin(6); | |
1059 | InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin); | |
1060 | coneinsertshape->Z(5) = z; | |
1061 | coneinsertshape->Rmin(5) = rmin; | |
1062 | coneinsertshape->Rmax(5) = coneinsertshape->GetRmax(4) - | |
1063 | kTanConeTheta*(coneinsertshape->GetZ(5) - coneinsertshape->GetZ(4)); | |
1064 | ||
1065 | x0 = coneinsertshape->GetZ(3); y0 = coneinsertshape->GetRmin(3); | |
1066 | x1 = coneinsertshape->GetZ(5); y1 = coneinsertshape->GetRmin(5); | |
1067 | coneinsertshape->Rmin(4) = Yfrom2Points(x0, y0, x1, y1, | |
1068 | coneinsertshape->Z(4)); | |
1069 | ||
1070 | x0 = coneshape->GetZ(5); y0 = coneshape->GetRmin(5); | |
1071 | x1 = coneshape->GetZ(6); y1 = coneshape->GetRmin(6); | |
1072 | x2 = coneshape->GetZ(7); y2 = coneshape->GetRmin(7); | |
1073 | InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin); | |
1074 | coneinsertshape->Z(6) = z; | |
1075 | coneinsertshape->Rmin(6) = rmin; | |
1076 | coneinsertshape->Rmax(6) = coneinsertshape->GetRmax(4) - | |
1077 | kTanConeTheta*(coneinsertshape->GetZ(6) - coneinsertshape->GetZ(4)); | |
1078 | ||
1079 | coneinsertshape->Z(7) = coneinsertshape->GetZ(6); | |
1080 | coneinsertshape->Rmin(7) = coneshape->GetRmin(7) + kConeCFThickness; | |
1081 | coneinsertshape->Rmax(7) = coneinsertshape->GetRmax(6); | |
1082 | ||
1083 | coneinsertshape->Z(8) = coneshape->GetZ(9) - kConeCFThickness; | |
1084 | coneinsertshape->Rmin(8) = coneinsertshape->GetRmin(7); | |
1085 | coneinsertshape->Rmax(8) = coneinsertshape->GetRmax(4) - | |
1086 | kTanConeTheta*(coneinsertshape->GetZ(8) - coneinsertshape->GetZ(4)); | |
1087 | ||
1088 | // SDD Cone Foam: another Pcon | |
1089 | TGeoPcon *conefoamshape = new TGeoPcon(0.0, 360.0, 4); | |
1090 | ||
1091 | RadiusOfCurvature(kConeRCurv+kConeCFThickness,0.0,coneinsertshape->GetZ(1), | |
1092 | coneinsertshape->GetRmin(1),kConeTheta,z,rmin); | |
1093 | ||
1094 | conefoamshape->Z(0) = z; | |
1095 | conefoamshape->Rmin(0) = rmin; | |
1096 | conefoamshape->Rmax(0) = conefoamshape->GetRmin(0); | |
1097 | ||
1098 | conefoamshape->Z(1) = conefoamshape->GetZ(0)+ | |
1099 | (kConeThickness-2.0*kConeCFThickness)/kSinConeTheta; | |
1100 | conefoamshape->Rmin(1) = RminFromZpCone(coneinsertshape,3,kConeTheta, | |
1101 | conefoamshape->GetZ(1)); | |
1102 | conefoamshape->Rmax(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta, | |
1103 | conefoamshape->GetZ(1)); | |
1104 | ||
1105 | conefoamshape->Z(2) = coneshape->GetZ(5)-kConeCFThickness; | |
1106 | conefoamshape->Rmin(2) = RminFromZpCone(coneinsertshape,3,kConeTheta, | |
1107 | conefoamshape->GetZ(2)); | |
1108 | conefoamshape->Rmax(2) = RmaxFromZpCone(coneinsertshape,4,kConeTheta, | |
1109 | conefoamshape->GetZ(2)); | |
1110 | ||
1111 | conefoamshape->Z(3) = coneinsertshape->GetZ(5)+ | |
1112 | (kConeThickness-2.0*kConeCFThickness)*kCosConeTheta; | |
1113 | conefoamshape->Rmax(3) = RmaxFromZpCone(coneinsertshape,4,kConeTheta, | |
1114 | conefoamshape->GetZ(3)); | |
1115 | conefoamshape->Rmin(3) = conefoamshape->GetRmax(3); | |
1116 | ||
1117 | // SDD Cone Holes: Pcon's | |
a30e33f0 | 1118 | // A single hole volume gives an overlap with coneinsert, so |
1119 | // three contiguous volumes are created: one to be put in the cone foam | |
1120 | // and two in the cone carbon fiber envelope | |
7d6c23de | 1121 | TGeoPcon *hole1shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4); |
1122 | ||
1123 | hole1shape->Rmin(0) = kHole1RMax; | |
1124 | hole1shape->Rmax(0) = hole1shape->GetRmin(0); | |
a30e33f0 | 1125 | hole1shape->Z(0) = ZFromRminpCone(conefoamshape,0,kConeTheta, |
7d6c23de | 1126 | hole1shape->GetRmin(0)); |
1127 | ||
1128 | hole1shape->Rmax(1) = hole1shape->GetRmax(0); | |
a30e33f0 | 1129 | hole1shape->Z(1) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, |
7d6c23de | 1130 | hole1shape->GetRmax(1)); |
a30e33f0 | 1131 | hole1shape->Rmin(1) = RminFromZpCone(conefoamshape,1,kConeTheta, |
7d6c23de | 1132 | hole1shape->GetZ(1)); |
1133 | ||
1134 | hole1shape->Rmin(2) = kHole1RMin; | |
a30e33f0 | 1135 | hole1shape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta, |
7d6c23de | 1136 | hole1shape->GetRmin(2)); |
a30e33f0 | 1137 | hole1shape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta, |
7d6c23de | 1138 | hole1shape->GetZ(2)); |
1139 | ||
1140 | hole1shape->Rmin(3) = hole1shape->GetRmin(2); | |
1141 | hole1shape->Rmax(3) = hole1shape->GetRmin(3); | |
a30e33f0 | 1142 | hole1shape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, |
7d6c23de | 1143 | hole1shape->GetRmax(3)); |
1144 | ||
a30e33f0 | 1145 | TGeoPcon *hole11shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4); |
1146 | ||
1147 | hole11shape->Rmin(0) = kHole1RMax; | |
1148 | hole11shape->Rmax(0) = hole11shape->GetRmin(0); | |
1149 | hole11shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1150 | hole11shape->GetRmin(0)); | |
1151 | ||
1152 | hole11shape->Rmax(1) = hole11shape->GetRmax(0); | |
1153 | hole11shape->Z(1) = ZFromRminpCone(coneinsertshape,3,kConeTheta, | |
1154 | hole11shape->GetRmax(1)); | |
1155 | hole11shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta, | |
1156 | hole11shape->GetZ(1)); | |
1157 | ||
1158 | hole11shape->Rmin(2) = kHole1RMin; | |
1159 | hole11shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1160 | hole11shape->GetRmin(2)); | |
1161 | hole11shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,kConeTheta, | |
1162 | hole11shape->GetZ(2)); | |
1163 | ||
1164 | hole11shape->Rmin(3) = hole11shape->GetRmin(2); | |
1165 | hole11shape->Rmax(3) = hole11shape->GetRmin(3); | |
1166 | hole11shape->Z(3) = ZFromRminpCone(coneinsertshape,3,kConeTheta, | |
1167 | hole11shape->GetRmax(3)); | |
1168 | ||
1169 | TGeoPcon *hole12shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4); | |
1170 | ||
1171 | hole12shape->Rmin(0) = kHole1RMax; | |
1172 | hole12shape->Rmax(0) = hole12shape->GetRmin(0); | |
1173 | hole12shape->Z(0) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta, | |
1174 | hole12shape->GetRmin(0)); | |
1175 | ||
1176 | hole12shape->Rmax(1) = hole12shape->GetRmax(0); | |
1177 | hole12shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1178 | hole12shape->GetRmax(1)); | |
1179 | hole12shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta, | |
1180 | hole12shape->GetZ(1)); | |
1181 | ||
1182 | hole12shape->Rmin(2) = kHole1RMin; | |
1183 | hole12shape->Z(2) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta, | |
1184 | hole12shape->GetRmin(2)); | |
1185 | hole12shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
1186 | hole12shape->GetZ(2)); | |
1187 | ||
1188 | hole12shape->Rmin(3) = hole12shape->GetRmin(2); | |
1189 | hole12shape->Rmax(3) = hole12shape->GetRmin(3); | |
1190 | hole12shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1191 | hole12shape->GetRmax(3)); | |
1192 | ||
1193 | // | |
7d6c23de | 1194 | TGeoPcon *hole2shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4); |
1195 | ||
1196 | hole2shape->Rmin(0) = kHole2RMax; | |
1197 | hole2shape->Rmax(0) = hole2shape->GetRmin(0); | |
a30e33f0 | 1198 | hole2shape->Z(0) = ZFromRminpCone(conefoamshape,0,kConeTheta, |
7d6c23de | 1199 | hole2shape->GetRmin(0)); |
1200 | ||
1201 | hole2shape->Rmax(1) = hole2shape->GetRmax(0); | |
a30e33f0 | 1202 | hole2shape->Z(1) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, |
7d6c23de | 1203 | hole2shape->GetRmax(1)); |
a30e33f0 | 1204 | hole2shape->Rmin(1) = RminFromZpCone(conefoamshape,1,kConeTheta, |
7d6c23de | 1205 | hole2shape->GetZ(1)); |
1206 | ||
1207 | hole2shape->Rmin(2) = kHole2RMin; | |
a30e33f0 | 1208 | hole2shape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta, |
7d6c23de | 1209 | hole2shape->GetRmin(2)); |
a30e33f0 | 1210 | hole2shape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta, |
7d6c23de | 1211 | hole2shape->GetZ(2)); |
1212 | ||
1213 | hole2shape->Rmin(3) = hole2shape->GetRmin(2); | |
1214 | hole2shape->Rmax(3) = hole2shape->GetRmin(3); | |
a30e33f0 | 1215 | hole2shape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, |
7d6c23de | 1216 | hole2shape->GetRmax(3)); |
1217 | ||
a30e33f0 | 1218 | TGeoPcon *hole21shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4); |
1219 | ||
1220 | hole21shape->Rmin(0) = kHole2RMax; | |
1221 | hole21shape->Rmax(0) = hole21shape->GetRmin(0); | |
1222 | hole21shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1223 | hole21shape->GetRmin(0)); | |
1224 | ||
1225 | hole21shape->Rmax(1) = hole21shape->GetRmax(0); | |
1226 | hole21shape->Z(1) = ZFromRminpCone(coneinsertshape,3,kConeTheta, | |
1227 | hole21shape->GetRmax(1)); | |
1228 | hole21shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta, | |
1229 | hole21shape->GetZ(1)); | |
1230 | ||
1231 | hole21shape->Rmin(2) = kHole2RMin; | |
1232 | hole21shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1233 | hole21shape->GetRmin(2)); | |
1234 | hole21shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,kConeTheta, | |
1235 | hole21shape->GetZ(2)); | |
1236 | ||
1237 | hole21shape->Rmin(3) = hole21shape->GetRmin(2); | |
1238 | hole21shape->Rmax(3) = hole21shape->GetRmin(3); | |
1239 | hole21shape->Z(3) = ZFromRminpCone(coneinsertshape,3,kConeTheta, | |
1240 | hole21shape->GetRmax(3)); | |
1241 | ||
1242 | TGeoPcon *hole22shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4); | |
1243 | ||
1244 | hole22shape->Rmin(0) = kHole2RMax; | |
1245 | hole22shape->Rmax(0) = hole22shape->GetRmin(0); | |
1246 | hole22shape->Z(0) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta, | |
1247 | hole22shape->GetRmin(0)); | |
1248 | ||
1249 | hole22shape->Rmax(1) = hole22shape->GetRmax(0); | |
1250 | hole22shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1251 | hole22shape->GetRmax(1)); | |
1252 | hole22shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta, | |
1253 | hole22shape->GetZ(1)); | |
1254 | ||
1255 | hole22shape->Rmin(2) = kHole2RMin; | |
1256 | hole22shape->Z(2) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta, | |
1257 | hole22shape->GetRmin(2)); | |
1258 | hole22shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
1259 | hole22shape->GetZ(2)); | |
1260 | ||
1261 | hole22shape->Rmin(3) = hole22shape->GetRmin(2); | |
1262 | hole22shape->Rmax(3) = hole22shape->GetRmin(3); | |
1263 | hole22shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1264 | hole22shape->GetRmax(3)); | |
1265 | ||
1266 | // | |
7d6c23de | 1267 | Double_t holePhi; |
1268 | holePhi = (kHole3Width/kHole3RMin)*TMath::RadToDeg(); | |
1269 | ||
1270 | TGeoPcon *hole3shape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
1271 | ||
1272 | hole3shape->Rmin(0) = kHole3RMin + kHole3DeltaR; | |
1273 | hole3shape->Rmax(0) = hole3shape->GetRmin(0); | |
a30e33f0 | 1274 | hole3shape->Z(0) = ZFromRminpCone(conefoamshape,0,kConeTheta, |
7d6c23de | 1275 | hole3shape->GetRmin(0)); |
1276 | ||
1277 | hole3shape->Rmax(1) = hole3shape->GetRmax(0); | |
a30e33f0 | 1278 | hole3shape->Z(1) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, |
7d6c23de | 1279 | hole3shape->GetRmax(1)); |
a30e33f0 | 1280 | hole3shape->Rmin(1) = RminFromZpCone(conefoamshape,1,kConeTheta, |
7d6c23de | 1281 | hole3shape->GetZ(1)); |
1282 | ||
1283 | hole3shape->Rmin(2) = kHole3RMin; | |
a30e33f0 | 1284 | hole3shape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta, |
7d6c23de | 1285 | hole3shape->GetRmin(2)); |
a30e33f0 | 1286 | hole3shape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta, |
7d6c23de | 1287 | hole3shape->GetZ(2)); |
1288 | ||
1289 | hole3shape->Rmin(3) = hole3shape->GetRmin(2); | |
1290 | hole3shape->Rmax(3) = hole3shape->GetRmin(3); | |
a30e33f0 | 1291 | hole3shape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, |
7d6c23de | 1292 | hole3shape->GetRmax(3)); |
1293 | ||
a30e33f0 | 1294 | TGeoPcon *hole31shape = new TGeoPcon(-holePhi/2., holePhi, 4); |
1295 | ||
1296 | hole31shape->Rmin(0) = kHole3RMin + kHole3DeltaR; | |
1297 | hole31shape->Rmax(0) = hole31shape->GetRmin(0); | |
1298 | hole31shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1299 | hole31shape->GetRmin(0)); | |
1300 | ||
1301 | hole31shape->Rmax(1) = hole31shape->GetRmax(0); | |
1302 | hole31shape->Z(1) = ZFromRminpCone(coneinsertshape,3,kConeTheta, | |
1303 | hole31shape->GetRmax(1)); | |
1304 | hole31shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta, | |
1305 | hole31shape->GetZ(1)); | |
1306 | ||
1307 | hole31shape->Rmin(2) = kHole3RMin; | |
1308 | hole31shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1309 | hole31shape->GetRmin(2)); | |
1310 | hole31shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,kConeTheta, | |
1311 | hole31shape->GetZ(2)); | |
1312 | ||
1313 | hole31shape->Rmin(3) = hole31shape->GetRmin(2); | |
1314 | hole31shape->Rmax(3) = hole31shape->GetRmin(3); | |
1315 | hole31shape->Z(3) = ZFromRminpCone(coneinsertshape,3,kConeTheta, | |
1316 | hole31shape->GetRmax(3)); | |
1317 | ||
1318 | TGeoPcon *hole32shape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
1319 | ||
1320 | hole32shape->Rmin(0) = kHole3RMin + kHole3DeltaR; | |
1321 | hole32shape->Rmax(0) = hole32shape->GetRmin(0); | |
1322 | hole32shape->Z(0) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta, | |
1323 | hole32shape->GetRmin(0)); | |
1324 | ||
1325 | hole32shape->Rmax(1) = hole32shape->GetRmax(0); | |
1326 | hole32shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1327 | hole32shape->GetRmax(1)); | |
1328 | hole32shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta, | |
1329 | hole32shape->GetZ(1)); | |
1330 | ||
1331 | hole32shape->Rmin(2) = kHole3RMin; | |
1332 | hole32shape->Z(2) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta, | |
1333 | hole32shape->GetRmin(2)); | |
1334 | hole32shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
1335 | hole32shape->GetZ(2)); | |
1336 | ||
1337 | hole32shape->Rmin(3) = hole32shape->GetRmin(2); | |
1338 | hole32shape->Rmax(3) = hole32shape->GetRmin(3); | |
1339 | hole32shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1340 | hole32shape->GetRmax(3)); | |
1341 | ||
1342 | // | |
3a299c65 | 1343 | holePhi = (kHole4Width/kHole4RMin)*TMath::RadToDeg(); |
1344 | ||
7d6c23de | 1345 | TGeoPcon *hole4shape = new TGeoPcon(-holePhi/2., holePhi, 4); |
1346 | ||
1347 | hole4shape->Rmin(0) = kHole4RMin + kHole4DeltaR; | |
1348 | hole4shape->Rmax(0) = hole4shape->GetRmin(0); | |
1349 | hole4shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1350 | hole4shape->GetRmin(0)); | |
1351 | ||
1352 | hole4shape->Rmax(1) = hole4shape->GetRmax(0); | |
1353 | hole4shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1354 | hole4shape->GetRmax(1)); | |
1355 | hole4shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta, | |
1356 | hole4shape->GetZ(1)); | |
1357 | ||
1358 | hole4shape->Rmin(2) = kHole4RMin; | |
1359 | hole4shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1360 | hole4shape->GetRmin(2)); | |
1361 | hole4shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
1362 | hole4shape->GetZ(2)); | |
1363 | ||
1364 | hole4shape->Rmin(3) = hole4shape->GetRmin(2); | |
1365 | hole4shape->Rmax(3) = hole4shape->GetRmin(3); | |
1366 | hole4shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1367 | hole4shape->GetRmax(3)); | |
1368 | ||
96eb8210 | 1369 | // Cables to be put inside the holes: Pcon's |
1370 | // (fractions are manually computed from AliITSv11GeometrySDD::SDDCables | |
1371 | TGeoPcon *hole1plastshape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4); | |
1372 | ||
1373 | hole1plastshape->Rmin(0) = hole1shape->GetRmin(0); | |
1374 | hole1plastshape->Rmax(0) = hole1shape->GetRmax(0); | |
1375 | hole1plastshape->Z(0) = hole1shape->GetZ(0); | |
1376 | ||
1377 | hole1plastshape->Rmin(1) = hole1shape->GetRmin(1); | |
1378 | hole1plastshape->Rmax(1) = hole1shape->GetRmax(1); | |
1379 | hole1plastshape->Z(1) = hole1shape->GetZ(1); | |
1380 | ||
1381 | dza = hole1plastshape->GetRmax(0) - (kHole1RMax-kHole1RMin)*kHolePlasticFrac; | |
1382 | ||
1383 | hole1plastshape->Rmin(2) = dza; | |
1384 | hole1plastshape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta, | |
1385 | hole1plastshape->GetRmin(2)); | |
1386 | hole1plastshape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta, | |
1387 | hole1plastshape->GetZ(2)); | |
1388 | ||
1389 | hole1plastshape->Rmin(3) = hole1plastshape->GetRmin(2); | |
1390 | hole1plastshape->Rmax(3) = hole1plastshape->GetRmin(3); | |
1391 | hole1plastshape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, | |
1392 | hole1plastshape->GetRmax(3)); | |
1393 | ||
1394 | TGeoPcon *hole1Cushape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4); | |
1395 | ||
1396 | hole1Cushape->Rmin(0) = hole1plastshape->GetRmin(2); | |
1397 | hole1Cushape->Rmax(0) = hole1Cushape->GetRmin(0); | |
1398 | hole1Cushape->Z(0) = hole1plastshape->GetZ(2); | |
1399 | ||
1400 | dza = hole1Cushape->GetRmax(0) - (kHole1RMax-kHole1RMin)*kHoleCuFrac; | |
1401 | ||
1402 | hole1Cushape->Rmin(1) = dza; | |
1403 | hole1Cushape->Rmax(1) = hole1Cushape->GetRmax(0); | |
1404 | hole1Cushape->Z(1) = ZFromRminpCone(conefoamshape,1,kConeTheta, | |
1405 | hole1Cushape->GetRmin(1)); | |
1406 | ||
1407 | hole1Cushape->Rmax(2) = hole1Cushape->GetRmax(0); | |
1408 | hole1Cushape->Rmin(2) = hole1Cushape->GetRmin(1); | |
1409 | hole1Cushape->Z(2) = hole1plastshape->GetZ(3); | |
1410 | ||
1411 | hole1Cushape->Rmin(3) = hole1Cushape->GetRmin(1); | |
1412 | hole1Cushape->Rmax(3) = hole1Cushape->GetRmin(3); | |
1413 | hole1Cushape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, | |
1414 | hole1Cushape->GetRmax(3)); | |
1415 | ||
1416 | TGeoPcon *hole1glassshape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4); | |
1417 | ||
1418 | hole1glassshape->Rmin(0) = hole1Cushape->GetRmin(1); | |
1419 | hole1glassshape->Rmax(0) = hole1glassshape->GetRmin(0); | |
1420 | hole1glassshape->Z(0) = hole1Cushape->GetZ(1); | |
1421 | ||
1422 | dza = hole1glassshape->GetRmax(0) - (kHole1RMax-kHole1RMin)*kHoleGlassFrac; | |
1423 | ||
1424 | hole1glassshape->Rmin(1) = dza; | |
1425 | hole1glassshape->Rmax(1) = hole1glassshape->GetRmax(0); | |
1426 | hole1glassshape->Z(1) = ZFromRminpCone(conefoamshape,1,kConeTheta, | |
1427 | hole1glassshape->GetRmin(1)); | |
1428 | ||
1429 | hole1glassshape->Rmax(2) = hole1glassshape->GetRmax(0); | |
1430 | hole1glassshape->Rmin(2) = hole1glassshape->GetRmin(1); | |
1431 | hole1glassshape->Z(2) = hole1Cushape->GetZ(3); | |
1432 | ||
1433 | hole1glassshape->Rmin(3) = hole1glassshape->GetRmin(1); | |
1434 | hole1glassshape->Rmax(3) = hole1glassshape->GetRmin(3); | |
1435 | hole1glassshape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, | |
1436 | hole1glassshape->GetRmax(3)); | |
1437 | // | |
1438 | TGeoPcon *hole2plastshape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4); | |
1439 | ||
1440 | hole2plastshape->Rmin(0) = hole2shape->GetRmin(0); | |
1441 | hole2plastshape->Rmax(0) = hole2shape->GetRmax(0); | |
1442 | hole2plastshape->Z(0) = hole2shape->GetZ(0); | |
1443 | ||
1444 | hole2plastshape->Rmin(1) = hole2shape->GetRmin(1); | |
1445 | hole2plastshape->Rmax(1) = hole2shape->GetRmax(1); | |
1446 | hole2plastshape->Z(1) = hole2shape->GetZ(1); | |
1447 | ||
1448 | dza = hole2plastshape->GetRmax(0) - (kHole2RMax-kHole2RMin)*kHolePlasticFrac; | |
1449 | ||
1450 | hole2plastshape->Rmin(2) = dza; | |
1451 | hole2plastshape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta, | |
1452 | hole2plastshape->GetRmin(2)); | |
1453 | hole2plastshape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta, | |
1454 | hole2plastshape->GetZ(2)); | |
1455 | ||
1456 | hole2plastshape->Rmin(3) = hole2plastshape->GetRmin(2); | |
1457 | hole2plastshape->Rmax(3) = hole2plastshape->GetRmin(3); | |
1458 | hole2plastshape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, | |
1459 | hole2plastshape->GetRmax(3)); | |
1460 | ||
1461 | TGeoPcon *hole2Cushape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4); | |
1462 | ||
1463 | hole2Cushape->Rmin(0) = hole2plastshape->GetRmin(2); | |
1464 | hole2Cushape->Rmax(0) = hole2Cushape->GetRmin(0); | |
1465 | hole2Cushape->Z(0) = hole2plastshape->GetZ(2); | |
1466 | ||
1467 | dza = hole2Cushape->GetRmax(0) - (kHole2RMax-kHole2RMin)*kHoleCuFrac; | |
1468 | ||
1469 | hole2Cushape->Rmin(1) = dza; | |
1470 | hole2Cushape->Rmax(1) = hole2Cushape->GetRmax(0); | |
1471 | hole2Cushape->Z(1) = ZFromRminpCone(conefoamshape,1,kConeTheta, | |
1472 | hole2Cushape->GetRmin(1)); | |
1473 | ||
1474 | hole2Cushape->Rmax(2) = hole2Cushape->GetRmax(0); | |
1475 | hole2Cushape->Rmin(2) = hole2Cushape->GetRmin(1); | |
1476 | hole2Cushape->Z(2) = hole2plastshape->GetZ(3); | |
1477 | ||
1478 | hole2Cushape->Rmin(3) = hole2Cushape->GetRmin(1); | |
1479 | hole2Cushape->Rmax(3) = hole2Cushape->GetRmin(3); | |
1480 | hole2Cushape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, | |
1481 | hole2Cushape->GetRmax(3)); | |
1482 | ||
1483 | TGeoPcon *hole2glassshape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4); | |
1484 | ||
1485 | hole2glassshape->Rmin(0) = hole2Cushape->GetRmin(1); | |
1486 | hole2glassshape->Rmax(0) = hole2glassshape->GetRmin(0); | |
1487 | hole2glassshape->Z(0) = hole2Cushape->GetZ(1); | |
1488 | ||
1489 | dza = hole2glassshape->GetRmax(0) - (kHole2RMax-kHole2RMin)*kHoleGlassFrac; | |
1490 | ||
1491 | hole2glassshape->Rmin(1) = dza; | |
1492 | hole2glassshape->Rmax(1) = hole2glassshape->GetRmax(0); | |
1493 | hole2glassshape->Z(1) = ZFromRminpCone(conefoamshape,1,kConeTheta, | |
1494 | hole2glassshape->GetRmin(1)); | |
1495 | ||
1496 | hole2glassshape->Rmax(2) = hole2glassshape->GetRmax(0); | |
1497 | hole2glassshape->Rmin(2) = hole2glassshape->GetRmin(1); | |
1498 | hole2glassshape->Z(2) = hole2Cushape->GetZ(3); | |
1499 | ||
1500 | hole2glassshape->Rmin(3) = hole2glassshape->GetRmin(1); | |
1501 | hole2glassshape->Rmax(3) = hole2glassshape->GetRmin(3); | |
1502 | hole2glassshape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta, | |
1503 | hole2glassshape->GetRmax(3)); | |
1504 | ||
1505 | ||
7d6c23de | 1506 | // Debug if requested |
1507 | if (GetDebug(1)) { | |
1508 | coneshape->InspectShape(); | |
1509 | coneinsertshape->InspectShape(); | |
1510 | conefoamshape->InspectShape(); | |
1511 | hole1shape->InspectShape(); | |
1512 | hole2shape->InspectShape(); | |
a30e33f0 | 1513 | hole3shape->InspectShape(); |
1514 | hole4shape->InspectShape(); | |
7d6c23de | 1515 | } |
1516 | ||
1517 | ||
1518 | // We have the shapes: now create the real volumes | |
1519 | ||
1520 | TGeoVolume *cfcone = new TGeoVolume("SDDCarbonFiberCone", | |
1521 | coneshape,medSDDcf); | |
1522 | cfcone->SetVisibility(kTRUE); | |
1523 | cfcone->SetLineColor(4); // Blue | |
1524 | cfcone->SetLineWidth(1); | |
1525 | cfcone->SetFillColor(cfcone->GetLineColor()); | |
1526 | cfcone->SetFillStyle(4000); // 0% transparent | |
1527 | ||
1528 | TGeoVolume *cfconeinsert = new TGeoVolume("SDDCarbonFiberConeInsert", | |
1529 | coneinsertshape,medSDDste); | |
1530 | cfconeinsert->SetVisibility(kTRUE); | |
1531 | cfconeinsert->SetLineColor(2); // Red | |
1532 | cfconeinsert->SetLineWidth(1); | |
1533 | cfconeinsert->SetFillColor(cfconeinsert->GetLineColor()); | |
1534 | cfconeinsert->SetFillStyle(4050); // 50% transparent | |
1535 | ||
1536 | TGeoVolume *cfconefoam = new TGeoVolume("SDDCarbonFiberConeFoam", | |
1537 | conefoamshape,medSDDroh); | |
1538 | cfconefoam->SetVisibility(kTRUE); | |
1539 | cfconefoam->SetLineColor(7); // Light blue | |
1540 | cfconefoam->SetLineWidth(1); | |
1541 | cfconefoam->SetFillColor(cfconefoam->GetLineColor()); | |
1542 | cfconefoam->SetFillStyle(4050); // 50% transparent | |
1543 | ||
1544 | TGeoVolume *hole1 = new TGeoVolume("SDDCableHole1", | |
1545 | hole1shape,medSDDair); | |
1546 | hole1->SetVisibility(kTRUE); | |
1547 | hole1->SetLineColor(5); // Yellow | |
1548 | hole1->SetLineWidth(1); | |
1549 | hole1->SetFillColor(hole1->GetLineColor()); | |
1550 | hole1->SetFillStyle(4090); // 90% transparent | |
1551 | ||
a30e33f0 | 1552 | TGeoVolume *hole11 = new TGeoVolume("SDDCableHole11", |
1553 | hole11shape,medSDDair); | |
1554 | hole11->SetVisibility(kTRUE); | |
1555 | hole11->SetLineColor(5); // Yellow | |
1556 | hole11->SetLineWidth(1); | |
1557 | hole11->SetFillColor(hole11->GetLineColor()); | |
1558 | hole11->SetFillStyle(4090); // 90% transparent | |
1559 | ||
1560 | TGeoVolume *hole12 = new TGeoVolume("SDDCableHole12", | |
1561 | hole12shape,medSDDair); | |
1562 | hole12->SetVisibility(kTRUE); | |
1563 | hole12->SetLineColor(5); // Yellow | |
1564 | hole12->SetLineWidth(1); | |
1565 | hole12->SetFillColor(hole12->GetLineColor()); | |
1566 | hole12->SetFillStyle(4090); // 90% transparent | |
1567 | ||
96eb8210 | 1568 | TGeoVolume *hole1plast = new TGeoVolume("SDDCableHole1Plast", |
1569 | hole1plastshape,medSDDplast); | |
1570 | hole1plast->SetVisibility(kTRUE); | |
1571 | hole1plast->SetLineColor(kBlue); | |
1572 | hole1plast->SetLineWidth(1); | |
1573 | hole1plast->SetFillColor(hole1plast->GetLineColor()); | |
1574 | hole1plast->SetFillStyle(4090); // 90% transparent | |
1575 | ||
1576 | TGeoVolume *hole1Cu = new TGeoVolume("SDDCableHole1Cu", | |
1577 | hole1Cushape,medSDDCu); | |
1578 | hole1Cu->SetVisibility(kTRUE); | |
1579 | hole1Cu->SetLineColor(kRed); | |
1580 | hole1Cu->SetLineWidth(1); | |
1581 | hole1Cu->SetFillColor(hole1Cu->GetLineColor()); | |
1582 | hole1Cu->SetFillStyle(4090); // 90% transparent | |
1583 | ||
1584 | TGeoVolume *hole1glass = new TGeoVolume("SDDCableHole1glass", | |
1585 | hole1glassshape,medSDDglass); | |
1586 | hole1glass->SetVisibility(kTRUE); | |
1587 | hole1glass->SetLineColor(kGreen); | |
1588 | hole1glass->SetLineWidth(1); | |
1589 | hole1glass->SetFillColor(hole1glass->GetLineColor()); | |
1590 | hole1glass->SetFillStyle(4090); // 90% transparent | |
1591 | ||
7d6c23de | 1592 | TGeoVolume *hole2 = new TGeoVolume("SDDCableHole2", |
1593 | hole2shape,medSDDair); | |
1594 | hole2->SetVisibility(kTRUE); | |
1595 | hole2->SetLineColor(5); // Yellow | |
1596 | hole2->SetLineWidth(1); | |
1597 | hole2->SetFillColor(hole2->GetLineColor()); | |
1598 | hole2->SetFillStyle(4090); // 90% transparent | |
1599 | ||
a30e33f0 | 1600 | TGeoVolume *hole21 = new TGeoVolume("SDDCableHole21", |
1601 | hole21shape,medSDDair); | |
1602 | hole21->SetVisibility(kTRUE); | |
1603 | hole21->SetLineColor(5); // Yellow | |
1604 | hole21->SetLineWidth(1); | |
1605 | hole21->SetFillColor(hole21->GetLineColor()); | |
1606 | hole21->SetFillStyle(4090); // 90% transparent | |
1607 | ||
1608 | TGeoVolume *hole22 = new TGeoVolume("SDDCableHole22", | |
1609 | hole22shape,medSDDair); | |
1610 | hole22->SetVisibility(kTRUE); | |
1611 | hole22->SetLineColor(5); // Yellow | |
1612 | hole22->SetLineWidth(1); | |
1613 | hole22->SetFillColor(hole22->GetLineColor()); | |
1614 | hole22->SetFillStyle(4090); // 90% transparent | |
1615 | ||
96eb8210 | 1616 | TGeoVolume *hole2plast = new TGeoVolume("SDDCableHole2Plast", |
1617 | hole2plastshape,medSDDplast); | |
1618 | hole2plast->SetVisibility(kTRUE); | |
1619 | hole2plast->SetLineColor(kBlue); | |
1620 | hole2plast->SetLineWidth(1); | |
1621 | hole2plast->SetFillColor(hole2plast->GetLineColor()); | |
1622 | hole2plast->SetFillStyle(4090); // 90% transparent | |
1623 | ||
1624 | TGeoVolume *hole2Cu = new TGeoVolume("SDDCableHole2Cu", | |
1625 | hole2Cushape,medSDDCu); | |
1626 | hole2Cu->SetVisibility(kTRUE); | |
1627 | hole2Cu->SetLineColor(kRed); | |
1628 | hole2Cu->SetLineWidth(1); | |
1629 | hole2Cu->SetFillColor(hole2Cu->GetLineColor()); | |
1630 | hole2Cu->SetFillStyle(4090); // 90% transparent | |
1631 | ||
1632 | TGeoVolume *hole2glass = new TGeoVolume("SDDCableHole2glass", | |
1633 | hole2glassshape,medSDDglass); | |
1634 | hole2glass->SetVisibility(kTRUE); | |
1635 | hole2glass->SetLineColor(kGreen); | |
1636 | hole2glass->SetLineWidth(1); | |
1637 | hole2glass->SetFillColor(hole2glass->GetLineColor()); | |
1638 | hole2glass->SetFillStyle(4090); // 90% transparent | |
1639 | ||
7d6c23de | 1640 | TGeoVolume *hole3 = new TGeoVolume("SDDCableHole3", |
1641 | hole3shape,medSDDair); | |
1642 | hole3->SetVisibility(kTRUE); | |
1643 | hole3->SetLineColor(5); // Yellow | |
1644 | hole3->SetLineWidth(1); | |
1645 | hole3->SetFillColor(hole3->GetLineColor()); | |
1646 | hole3->SetFillStyle(4090); // 90% transparent | |
1647 | ||
a30e33f0 | 1648 | TGeoVolume *hole31 = new TGeoVolume("SDDCableHole31", |
1649 | hole31shape,medSDDair); | |
1650 | hole31->SetVisibility(kTRUE); | |
1651 | hole31->SetLineColor(5); // Yellow | |
1652 | hole31->SetLineWidth(1); | |
1653 | hole31->SetFillColor(hole31->GetLineColor()); | |
1654 | hole31->SetFillStyle(4090); // 90% transparent | |
1655 | ||
1656 | TGeoVolume *hole32 = new TGeoVolume("SDDCableHole32", | |
1657 | hole32shape,medSDDair); | |
1658 | hole32->SetVisibility(kTRUE); | |
1659 | hole32->SetLineColor(5); // Yellow | |
1660 | hole32->SetLineWidth(1); | |
1661 | hole32->SetFillColor(hole32->GetLineColor()); | |
1662 | hole32->SetFillStyle(4090); // 90% transparent | |
1663 | ||
7d6c23de | 1664 | TGeoVolume *hole4 = new TGeoVolume("SDDCableHole4", |
1665 | hole4shape,medSDDair); | |
1666 | hole4->SetVisibility(kTRUE); | |
1667 | hole4->SetLineColor(5); // Yellow | |
1668 | hole4->SetLineWidth(1); | |
1669 | hole4->SetFillColor(hole4->GetLineColor()); | |
1670 | hole4->SetFillStyle(4090); // 90% transparent | |
1671 | ||
1672 | // Mount up a cone | |
1673 | cfconeinsert->AddNode(cfconefoam,1,0); | |
1674 | ||
96eb8210 | 1675 | hole1->AddNode(hole1plast, 1, 0); |
1676 | hole1->AddNode(hole1Cu, 1, 0); | |
1677 | hole1->AddNode(hole1glass, 1, 0); | |
1678 | ||
1679 | hole2->AddNode(hole2plast, 1, 0); | |
1680 | hole2->AddNode(hole2Cu, 1, 0); | |
1681 | hole2->AddNode(hole2glass, 1, 0); | |
1682 | ||
7d6c23de | 1683 | for (Int_t i=0; i<12; i++) { |
1684 | Double_t phiH = i*30.0; | |
a30e33f0 | 1685 | cfconefoam->AddNode(hole1 , i+1, new TGeoRotation("", 0, 0, phiH)); |
1686 | cfcone->AddNode(hole11, i+1, new TGeoRotation("", 0, 0, phiH)); | |
1687 | cfcone->AddNode(hole12, i+1, new TGeoRotation("", 0, 0, phiH)); | |
7d6c23de | 1688 | } |
1689 | ||
1690 | for (Int_t i=0; i<6; i++) { | |
1691 | Double_t phiH = i*60.0; | |
a30e33f0 | 1692 | cfconefoam->AddNode(hole2 , i+1, new TGeoRotation("", 0, 0, phiH)); |
1693 | cfcone->AddNode(hole21, i+1, new TGeoRotation("", 0, 0, phiH)); | |
1694 | cfcone->AddNode(hole22, i+1, new TGeoRotation("", 0, 0, phiH)); | |
7d6c23de | 1695 | } |
1696 | ||
1697 | for (Int_t i=0; i<kNHole3; i++) { | |
1698 | Double_t phiH0 = 360./(Double_t)kNHole3; | |
1699 | Double_t phiH = i*phiH0 + 0.5*phiH0; | |
a30e33f0 | 1700 | cfconefoam->AddNode(hole3 , i+1, new TGeoRotation("", phiH, 0, 0)); |
1701 | cfcone->AddNode(hole31, i+1, new TGeoRotation("", phiH, 0, 0)); | |
1702 | cfcone->AddNode(hole32, i+1, new TGeoRotation("", phiH, 0, 0)); | |
7d6c23de | 1703 | } |
a30e33f0 | 1704 | |
1705 | cfcone->AddNode(cfconeinsert,1,0); | |
1706 | ||
7d6c23de | 1707 | /* |
1708 | for (Int_t i=0; i<kNHole4; i++) { | |
1709 | Double_t phiH0 = 360./(Double_t)kNHole4; | |
1710 | Double_t phiH = i*phiH0 + 0.25*phiH0; | |
1711 | cfcone->AddNode(hole4, i+1, new TGeoRotation("", phiH, 0, 0)); | |
1712 | } | |
1713 | */ | |
3a299c65 | 1714 | // Finally put everything in the mother volume |
1715 | moth->AddNode(cfcylinder,1,0); | |
7d6c23de | 1716 | |
1717 | z = coneshape->Z(9); | |
3a299c65 | 1718 | moth->AddNode(cfcone,1,new TGeoTranslation(0, 0, -z - kCylinderHalfLength)); |
1719 | moth->AddNode(cfcone,2,new TGeoCombiTrans (0, 0, z + kCylinderHalfLength, | |
1720 | new TGeoRotation("", 0, 180, 0) )); | |
7d6c23de | 1721 | |
7d6c23de | 1722 | |
1723 | return; | |
172b0d90 | 1724 | } |
7d6c23de | 1725 | |
172b0d90 | 1726 | //______________________________________________________________________ |
43aefea7 | 1727 | void AliITSv11GeometrySupport::SSDCone(TGeoVolume *moth,const TGeoManager *mgr) |
3a299c65 | 1728 | { |
1729 | // | |
1730 | // Creates the SSD support cone and cylinder geometry. as a | |
1731 | // volume assembly and adds it to the mother volume | |
1732 | // (part of this code is taken or anyway inspired to SSDCone method | |
1733 | // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
1734 | // | |
1735 | // Input: | |
1736 | // moth : the TGeoVolume owing the volume structure | |
1737 | // mgr : the GeoManager (default gGeoManager) | |
1738 | // Output: | |
1739 | // | |
1740 | // Created: ??? Bjorn S. Nilsen | |
1741 | // Updated: 08 Mar 2008 Mario Sitta | |
1742 | // | |
1743 | // Technical data are taken from: "ITS Supporto Generale" (technical | |
1744 | // drawings ALR3-0743/1, ALR3-0743/1A and ALR3-0743/1B), "Supporto Generale | |
1745 | // Settore SSD" (technical drawings ALR3-0743/2A and ALR3-0743/2E), private | |
1746 | // communication with B. Giraudo | |
5e15508a | 1747 | // |
1748 | // Updated: 11 Apr 2008 Mario Sitta | |
1749 | // Measures from drawings give overlaps with SPD thermal shield wings, | |
1750 | // so the terminal part of the SSD cone was reduced | |
573a206f | 1751 | // |
1752 | // Updated: 30 Mar 2010 Mario Sitta | |
1753 | // Following M. van Leeuwen's suggestion on material budget, the thickness | |
1754 | // of the carbon fiber cylinder was increased from 0.6 to 0.625mm | |
3a299c65 | 1755 | |
1756 | // Dimensions of the Central cylinder and flanges | |
1757 | const Double_t kCylinderHalfLength = (1144.0/2) *fgkmm; | |
1758 | const Double_t kCylinderOuterRadius = ( 595.0/2) *fgkmm; | |
573a206f | 1759 | const Double_t kCylinderThickness = 0.625*fgkmm; |
3a299c65 | 1760 | const Double_t kFoamHalfLength = (1020.0/2) *fgkmm; |
1761 | const Double_t kFoamThickness = 5.0 *fgkmm; | |
1762 | const Double_t kFlangeHalfLength = | |
1763 | (kCylinderHalfLength-kFoamHalfLength)/2.; | |
1764 | const Double_t kFlangeInnerRadius = ( 563.0/2) *fgkmm; | |
1765 | // Dimensions of the Cone | |
fd5b6398 | 1766 | const Double_t kConeROuterMin = ( 957.0/2) *fgkmm; |
1767 | const Double_t kConeROuterMax = ( 997.0/2) *fgkmm; | |
3a299c65 | 1768 | const Double_t kConeRInnerMin = ( 564.0/2) *fgkmm; |
1769 | const Double_t kConeRCurv1 = 10.0 *fgkmm; | |
1770 | const Double_t kConeRCurv2 = 25.0 *fgkmm; | |
1771 | const Double_t kConeCent1RCurv2 = ( 578.0/2) *fgkmm; | |
6b42825b | 1772 | const Double_t kConeCent2RCurv2 = ( 592.0/2) *fgkmm; |
5e15508a | 1773 | // const Double_t kConeZOuterRing = 47.0 *fgkmm; |
1774 | // const Double_t kConeZOuterRingInside = 30.25*fgkmm; | |
1775 | // const Double_t kConeZInnerRing = 161.5 *fgkmm; | |
1776 | // const Double_t kConeZLength = 176.5 *fgkmm; | |
1777 | const Double_t kConeZOuterRing = 38.5 *fgkmm; | |
1778 | const Double_t kConeZOuterRingInside = 22.2 *fgkmm; | |
1779 | const Double_t kConeZInnerRing = 153.0 *fgkmm; | |
1780 | const Double_t kConeZLength = 168.0 *fgkmm; | |
3a299c65 | 1781 | const Double_t kConeZPosition = kConeZLength + kCylinderHalfLength; |
1782 | const Double_t kConeThickness = 13.0 *fgkmm; // Cone thickness | |
81adc4e0 | 1783 | const Double_t kConeTheta = 39.1 *fgkDegree; // Cone angle |
3a299c65 | 1784 | const Double_t kSinConeTheta = |
1785 | TMath::Sin(kConeTheta*TMath::DegToRad()); | |
1786 | const Double_t kCosConeTheta = | |
1787 | TMath::Cos(kConeTheta*TMath::DegToRad()); | |
1788 | // Dimensions of the Foam cores | |
1789 | const Double_t kConeFoam1Length = 112.3 *fgkmm; | |
1790 | const Double_t kConeFoam2Length = 58.4 *fgkmm; | |
1791 | // Dimensions of the Cone Holes | |
1792 | const Double_t kCoolingHoleWidth = 40.0 *fgkmm; | |
1793 | const Double_t kCoolingHoleHight = 30.0 *fgkmm; | |
1794 | const Double_t kCoolingHoleRmin = 350.0 *fgkmm; | |
1795 | const Double_t kCoolingHolePhi = 45.0 *fgkDegree; | |
1796 | const Double_t kMountingHoleWidth = 20.0 *fgkmm; | |
1797 | const Double_t kMountingHoleHight = 20.0 *fgkmm; | |
1798 | const Double_t kMountingHoleRmin = 317.5 *fgkmm; | |
1799 | const Double_t kMountingHolePhi = 60.0 *fgkDegree; | |
1800 | const Double_t kCableHoleRin = ( 800.0/2) *fgkmm; | |
1801 | const Double_t kCableHoleRout = ( 920.0/2) *fgkmm; | |
1802 | const Double_t kCableHoleWidth = 200.0 *fgkmm; | |
1803 | // const Double_t kCableHoleAngle = 42.0 *fgkDegree; | |
1804 | // Dimensions of the Cone Wings | |
1805 | const Double_t kWingRmax = 527.5 *fgkmm; | |
1806 | const Double_t kWingWidth = 70.0 *fgkmm; | |
1807 | const Double_t kWingHalfThick = ( 10.0/2) *fgkmm; | |
1808 | const Double_t kThetaWing = 45.0 *fgkDegree; | |
1809 | // Dimensions of the SSD-SDD Mounting Brackets | |
989ee428 | 1810 | const Double_t kBracketRmin = ( 541.0/2) *fgkmm;// See SDD ROutMin |
3a299c65 | 1811 | const Double_t kBracketRmax = ( 585.0/2) *fgkmm; |
1812 | const Double_t kBracketHalfLength = ( 4.0/2) *fgkmm; | |
1813 | const Double_t kBracketPhi = (70.*fgkmm/kBracketRmax)*fgkRadian; | |
1814 | // Common data | |
1815 | const Double_t kCFThickness = 0.75*fgkmm; //Carb. fib. thick. | |
1816 | ||
1817 | ||
1818 | // Local variables | |
1819 | Double_t rmin1, rmin2, rmax, z; | |
1820 | ||
1821 | // | |
1822 | //Begin_Html | |
1823 | /* | |
1824 | <img src="picts/ITS/file_name.gif"> | |
1825 | <P> | |
1826 | <FONT FACE'"TIMES"> | |
1827 | ITS SSD central support and thermal shield cylinder. | |
1828 | </FONT> | |
1829 | </P> | |
1830 | */ | |
1831 | //End_Html | |
1832 | // | |
1833 | ||
1834 | // Central cylinder with its internal foam and the lateral flanges: | |
1835 | // a carbon fiber Pcon which contains a rohacell Tube and two | |
1836 | // stesalite Cone's | |
1837 | TGeoPcon *externalcylshape = new TGeoPcon(0,360,4); | |
1838 | ||
1839 | rmax = kCylinderOuterRadius; | |
1840 | rmin1 = kFlangeInnerRadius - kCylinderThickness; | |
1841 | rmin2 = rmax - 2*kCylinderThickness - kFoamThickness; | |
1842 | externalcylshape->DefineSection(0,-kCylinderHalfLength,rmin1,rmax); | |
1843 | externalcylshape->DefineSection(1,-kFoamHalfLength ,rmin2,rmax); | |
1844 | externalcylshape->DefineSection(2, kFoamHalfLength ,rmin2,rmax); | |
1845 | externalcylshape->DefineSection(3, kCylinderHalfLength,rmin1,rmax); | |
1846 | ||
1847 | rmax = kCylinderOuterRadius - kCylinderThickness; | |
1848 | rmin1 = rmax - kFoamThickness; | |
1849 | TGeoTube *foamshape = new TGeoTube(rmin1,rmax,kFoamHalfLength); | |
1850 | ||
1851 | rmax = kCylinderOuterRadius - kCylinderThickness; | |
1852 | rmin1 = rmax - kFoamThickness; | |
1853 | rmin2 = kFlangeInnerRadius; | |
1854 | TGeoCone *flangeshape = new TGeoCone(kFlangeHalfLength, | |
1855 | rmin1,rmax,rmin2,rmax); | |
1856 | ||
1857 | ||
1858 | // We have the shapes: now create the real volumes | |
1859 | ||
1860 | TGeoMedium *medSSDcf = mgr->GetMedium("ITS_SSD C (M55J)$"); | |
1861 | TGeoMedium *medSSDair = mgr->GetMedium("ITS_SSD AIR$"); | |
1862 | TGeoMedium *medSSDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite | |
1863 | TGeoMedium *medSSDroh = mgr->GetMedium("ITS_ROHACELL$"); | |
1864 | TGeoMedium *medSSDal = mgr->GetMedium("ITS_ALUMINUM$"); | |
1865 | ||
1866 | TGeoVolume *cfcylinder = new TGeoVolume("SSDexternalcylinder", | |
1867 | externalcylshape,medSSDcf); | |
1868 | cfcylinder->SetVisibility(kTRUE); | |
1869 | cfcylinder->SetLineColor(4); // blue | |
1870 | cfcylinder->SetLineWidth(1); | |
1871 | cfcylinder->SetFillColor(cfcylinder->GetLineColor()); | |
1872 | cfcylinder->SetFillStyle(4000); // 0% transparent | |
1873 | ||
1874 | TGeoVolume *foamcylinder = new TGeoVolume("SSDfoamcylinder", | |
1875 | foamshape,medSSDroh); | |
1876 | foamcylinder->SetVisibility(kTRUE); | |
1877 | foamcylinder->SetLineColor(3); // green | |
1878 | foamcylinder->SetLineWidth(1); | |
1879 | foamcylinder->SetFillColor(foamcylinder->GetLineColor()); | |
1880 | foamcylinder->SetFillStyle(4050); // 50% transparent | |
1881 | ||
1882 | TGeoVolume *flangecylinder = new TGeoVolume("SSDflangecylinder", | |
1883 | flangeshape,medSSDste); | |
1884 | flangecylinder->SetVisibility(kTRUE); | |
1885 | flangecylinder->SetLineColor(2); // red | |
1886 | flangecylinder->SetLineWidth(1); | |
1887 | flangecylinder->SetFillColor(flangecylinder->GetLineColor()); | |
1888 | flangecylinder->SetFillStyle(4050); // 50% transparent | |
1889 | ||
1890 | // Mount up the cylinder | |
1891 | cfcylinder->AddNode(foamcylinder,1,0); | |
1892 | cfcylinder->AddNode(flangecylinder,1, | |
1893 | new TGeoTranslation(0, 0, kFoamHalfLength+kFlangeHalfLength)); | |
1894 | cfcylinder->AddNode(flangecylinder,2,new TGeoCombiTrans( | |
1895 | 0, 0, -kFoamHalfLength-kFlangeHalfLength, | |
1896 | new TGeoRotation("",0,180,0) ) ); | |
1897 | ||
1898 | ||
1899 | // The whole Cone as an assembly | |
1900 | TGeoVolumeAssembly *vC = new TGeoVolumeAssembly("ITSssdCone"); | |
1901 | ||
1902 | ||
1903 | // SSD Support Cone with its internal inserts: a carbon fiber Pcon | |
1904 | // with holes which contains a stesalite Pcon which on turn contains a | |
1905 | // rohacell Pcon | |
1906 | TGeoPcon *coneshape = new TGeoPcon(0.0, 360.0, 12); | |
1907 | ||
1908 | coneshape->Z(0) = 0.0; | |
1909 | coneshape->Rmin(0) = kConeROuterMin; | |
1910 | coneshape->Rmax(0) = kConeROuterMax; | |
1911 | ||
1912 | coneshape->Z(1) = kConeZOuterRingInside - kConeRCurv1; | |
1913 | coneshape->Rmin(1) = coneshape->GetRmin(0); | |
1914 | coneshape->Rmax(1) = coneshape->GetRmax(0); | |
1915 | ||
1916 | coneshape->Z(2) = kConeZOuterRingInside; | |
1917 | coneshape->Rmin(2) = coneshape->GetRmin(1) - kConeRCurv1; | |
1918 | coneshape->Rmax(2) = coneshape->GetRmax(0); | |
1919 | ||
1920 | coneshape->Z(3) = coneshape->GetZ(2); | |
1921 | coneshape->Rmax(3) = coneshape->GetRmax(0); | |
1922 | ||
1923 | coneshape->Z(4) = kConeZOuterRing - kConeRCurv1; | |
1924 | coneshape->Rmax(4) = coneshape->GetRmax(0); | |
1925 | ||
1926 | coneshape->Z(5) = kConeZOuterRing; | |
1927 | coneshape->Rmax(5) = coneshape->GetRmax(4) - kConeRCurv1; | |
1928 | ||
1929 | coneshape->Z(6) = coneshape->GetZ(5); | |
1930 | ||
1931 | RadiusOfCurvature(kConeRCurv2,90.0,kConeZInnerRing,kConeCent1RCurv2, | |
1932 | 90.0-kConeTheta,z,rmin1); | |
1933 | coneshape->Z(7) = z; | |
1934 | coneshape->Rmin(7) = rmin1; | |
1935 | ||
1936 | coneshape->Rmin(3) = RminFromZpCone(coneshape,7,90.-kConeTheta, | |
1937 | coneshape->GetZ(3)); | |
1938 | ||
1939 | coneshape->Rmin(4) = RminFrom2Points(coneshape,3,7,coneshape->GetZ(4)); | |
1940 | ||
1941 | coneshape->Rmin(5) = RminFrom2Points(coneshape,3,7,coneshape->GetZ(5)); | |
1942 | ||
1943 | coneshape->Rmin(6) = coneshape->GetRmin(5); | |
1944 | ||
1945 | coneshape->Z(8) = kConeZInnerRing; | |
1946 | coneshape->Rmin(8) = kConeCent1RCurv2; | |
1947 | ||
1948 | coneshape->Z(9) = coneshape->GetZ(8); | |
1949 | coneshape->Rmin(9) = kConeRInnerMin; | |
1950 | ||
1951 | RadiusOfCurvature(kConeRCurv2,90.0,kConeZLength,kConeCent2RCurv2, | |
1952 | 90.0-kConeTheta,z,rmax); | |
1953 | ||
1954 | coneshape->Z(10) = z; | |
1955 | coneshape->Rmin(10) = coneshape->GetRmin(9); | |
1956 | coneshape->Rmax(10) = rmax; | |
1957 | ||
1958 | coneshape->Rmax(6) = RmaxFromZpCone(coneshape,10,90.-kConeTheta, | |
1959 | coneshape->GetZ(6)); | |
1960 | ||
1961 | coneshape->Rmax(7) = RmaxFrom2Points(coneshape,6,10,coneshape->GetZ(7)); | |
1962 | ||
1963 | coneshape->Rmax(8) = RmaxFrom2Points(coneshape,6,10,coneshape->GetZ(8)); | |
1964 | ||
1965 | coneshape->Rmax(9) = coneshape->GetRmax(8); | |
1966 | ||
1967 | coneshape->Z(11) = kConeZLength; | |
1968 | coneshape->Rmin(11) = coneshape->GetRmin(10); | |
1969 | coneshape->Rmax(11) = kConeCent2RCurv2; | |
1970 | ||
1971 | // SSD Cone Insert: another Pcon | |
1972 | Double_t x0, y0, x1, y1, x2, y2; | |
1973 | TGeoPcon *coneinsertshape = new TGeoPcon(0.0,360.0,12); | |
1974 | ||
1975 | coneinsertshape->Z(0) = coneshape->GetZ(0) + kCFThickness; | |
1976 | coneinsertshape->Rmin(0) = coneshape->GetRmin(0) + kCFThickness; | |
1977 | coneinsertshape->Rmax(0) = coneshape->GetRmax(0) - kCFThickness; | |
1978 | ||
1979 | x0 = coneshape->GetZ(0); y0 = coneshape->GetRmin(0); | |
1980 | x1 = coneshape->GetZ(1); y1 = coneshape->GetRmin(1); | |
1981 | x2 = coneshape->GetZ(2); y2 = coneshape->GetRmin(2); | |
1982 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
1983 | coneinsertshape->Z(1) = z; | |
1984 | coneinsertshape->Rmin(1) = rmin1; | |
1985 | coneinsertshape->Rmax(1) = coneinsertshape->GetRmax(0); | |
1986 | ||
1987 | x0 = coneshape->GetZ(1); y0 = coneshape->GetRmin(1); | |
1988 | x1 = coneshape->GetZ(2); y1 = coneshape->GetRmin(2); | |
1989 | x2 = coneshape->GetZ(3); y2 = coneshape->GetRmin(3); | |
1990 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
1991 | coneinsertshape->Z(2) = z; | |
1992 | coneinsertshape->Rmin(2) = rmin1; | |
1993 | coneinsertshape->Rmax(2) = coneinsertshape->GetRmax(1); | |
1994 | ||
1995 | x0 = coneshape->GetZ(2); y0 = coneshape->GetRmin(2); | |
1996 | x1 = coneshape->GetZ(3); y1 = coneshape->GetRmin(3); | |
1997 | x2 = coneshape->GetZ(4); y2 = coneshape->GetRmin(4); | |
1998 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
1999 | coneinsertshape->Z(3) = z; | |
2000 | coneinsertshape->Rmin(3) = rmin1; | |
2001 | coneinsertshape->Rmax(3) = coneinsertshape->GetRmax(2); | |
2002 | ||
2003 | x0 = coneshape->GetZ(3); y0 = coneshape->GetRmax(3); | |
2004 | x1 = coneshape->GetZ(4); y1 = coneshape->GetRmax(4); | |
2005 | x2 = coneshape->GetZ(5); y2 = coneshape->GetRmax(5); | |
2006 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
2007 | coneinsertshape->Z(4) = z; | |
2008 | coneinsertshape->Rmax(4) = rmax; | |
2009 | ||
2010 | x0 = coneshape->GetZ(4); y0 = coneshape->GetRmax(4); | |
2011 | x1 = coneshape->GetZ(5); y1 = coneshape->GetRmax(5); | |
2012 | x2 = coneshape->GetZ(6); y2 = coneshape->GetRmax(6); | |
2013 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
2014 | coneinsertshape->Z(5) = z; | |
2015 | coneinsertshape->Rmax(5) = rmax; | |
2016 | ||
2017 | x0 = coneshape->GetZ(5); y0 = coneshape->GetRmax(5); | |
2018 | x1 = coneshape->GetZ(6); y1 = coneshape->GetRmax(6); | |
2019 | x2 = coneshape->GetZ(7); y2 = coneshape->GetRmax(7); | |
2020 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
2021 | coneinsertshape->Z(6) = z; | |
2022 | coneinsertshape->Rmax(6) = rmax; | |
2023 | ||
2024 | x0 = coneshape->GetZ(6); y0 = coneshape->GetRmin(6); | |
2025 | x1 = coneshape->GetZ(7); y1 = coneshape->GetRmin(7); | |
2026 | x2 = coneshape->GetZ(8); y2 = coneshape->GetRmin(8); | |
2027 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
2028 | coneinsertshape->Z(7) = z; | |
2029 | coneinsertshape->Rmin(7) = rmin1; | |
2030 | ||
2031 | coneinsertshape->Rmin(4) = RminFrom2Points(coneinsertshape,3,7, | |
2032 | coneinsertshape->GetZ(4)); | |
2033 | ||
2034 | coneinsertshape->Rmin(5) = RminFrom2Points(coneinsertshape,3,7, | |
2035 | coneinsertshape->GetZ(5)); | |
2036 | ||
2037 | coneinsertshape->Rmin(6) = coneinsertshape->GetRmin(5); | |
2038 | ||
2039 | x0 = coneshape->GetZ(7); y0 = coneshape->GetRmin(7); | |
2040 | x1 = coneshape->GetZ(8); y1 = coneshape->GetRmin(8); | |
2041 | x2 = coneshape->GetZ(9); y2 = coneshape->GetRmin(9); | |
2042 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
2043 | coneinsertshape->Z(8) = z; | |
2044 | coneinsertshape->Rmin(8) = rmin1; | |
2045 | ||
2046 | x0 = coneshape->GetZ( 8); y0 = coneshape->GetRmin( 8); | |
2047 | x1 = coneshape->GetZ( 9); y1 = coneshape->GetRmin( 9); | |
2048 | x2 = coneshape->GetZ(10); y2 = coneshape->GetRmin(10); | |
2049 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
2050 | coneinsertshape->Z(9) = z; | |
2051 | coneinsertshape->Rmin(9) = rmin1; | |
2052 | ||
2053 | x0 = coneshape->GetZ( 9); y0 = coneshape->GetRmax( 9); | |
2054 | x1 = coneshape->GetZ(10); y1 = coneshape->GetRmax(10); | |
2055 | x2 = coneshape->GetZ(11); y2 = coneshape->GetRmax(11); | |
2056 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
2057 | coneinsertshape->Z(10) = z; | |
2058 | coneinsertshape->Rmax(10) = rmax; | |
2059 | coneinsertshape->Rmin(10) = coneinsertshape->GetRmin(9); | |
2060 | ||
2061 | coneinsertshape->Rmax(7) = RmaxFrom2Points(coneinsertshape,6,10, | |
2062 | coneinsertshape->GetZ(7)); | |
2063 | ||
2064 | coneinsertshape->Rmax(8) = RmaxFrom2Points(coneinsertshape,6,10, | |
2065 | coneinsertshape->GetZ(8)); | |
2066 | ||
2067 | coneinsertshape->Rmax(9) = coneinsertshape->GetRmax(8); | |
2068 | ||
2069 | x0 = coneshape->GetZ(10); y0 = coneshape->GetRmax(10); | |
2070 | x1 = coneshape->GetZ(11); y1 = coneshape->GetRmax(11); | |
2071 | x2 = coneshape->GetZ(11); y2 = coneshape->GetRmin(11); | |
2072 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
2073 | coneinsertshape->Z(11) = z; | |
2074 | coneinsertshape->Rmax(11) = rmax; | |
2075 | coneinsertshape->Rmin(11) = coneinsertshape->GetRmin(10); | |
2076 | ||
2077 | // SSD Cone Foams: two other Pcon's | |
2078 | TGeoPcon *conefoam1shape = new TGeoPcon(0.0, 360.0, 4); | |
2079 | ||
2080 | conefoam1shape->Z(0) = coneinsertshape->GetZ(3); | |
2081 | conefoam1shape->Rmin(0) = coneinsertshape->GetRmin(3); | |
2082 | conefoam1shape->Rmax(0) = conefoam1shape->GetRmin(0); | |
2083 | ||
2084 | conefoam1shape->Rmax(1) = conefoam1shape->GetRmax(0); | |
2085 | conefoam1shape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
2086 | conefoam1shape->GetRmax(1)); | |
2087 | conefoam1shape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta, | |
2088 | conefoam1shape->GetZ(1)); | |
2089 | ||
2090 | Double_t t = kConeThickness - 2*kCFThickness; | |
2091 | conefoam1shape->Rmin(2) = conefoam1shape->GetRmax(0) - | |
2092 | (kConeFoam1Length*kCosConeTheta - t*kSinConeTheta); | |
2093 | conefoam1shape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
2094 | conefoam1shape->GetRmin(2)); | |
2095 | conefoam1shape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta, | |
2096 | conefoam1shape->GetZ(2)); | |
2097 | ||
2098 | conefoam1shape->Rmin(3) = conefoam1shape->GetRmin(2); | |
2099 | conefoam1shape->Rmax(3) = conefoam1shape->GetRmin(3); | |
2100 | conefoam1shape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
2101 | conefoam1shape->GetRmax(3)); | |
2102 | ||
2103 | TGeoPcon *conefoam2shape = new TGeoPcon(0.0, 360.0, 4); | |
2104 | ||
2105 | conefoam2shape->Z(3) = coneinsertshape->GetZ(10); | |
2106 | conefoam2shape->Rmin(3) = coneinsertshape->GetRmax(10); | |
2107 | conefoam2shape->Rmax(3) = conefoam2shape->GetRmin(3); | |
2108 | ||
2109 | conefoam2shape->Rmin(2) = conefoam2shape->GetRmin(3); | |
2110 | conefoam2shape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
2111 | conefoam2shape->GetRmin(2)); | |
2112 | conefoam2shape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta, | |
2113 | conefoam2shape->GetZ(2)); | |
2114 | ||
2115 | conefoam2shape->Rmin(0) = conefoam2shape->GetRmax(2) + | |
2116 | (kConeFoam2Length*kCosConeTheta - t*kSinConeTheta); | |
2117 | conefoam2shape->Rmax(0) = conefoam2shape->GetRmin(0); | |
2118 | conefoam2shape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
2119 | conefoam2shape->GetRmin(0)); | |
2120 | ||
2121 | conefoam2shape->Rmax(1) = conefoam2shape->GetRmax(0); | |
2122 | conefoam2shape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
2123 | conefoam2shape->GetRmax(1)); | |
2124 | conefoam2shape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta, | |
2125 | conefoam2shape->GetZ(1)); | |
2126 | ||
2127 | // SSD Cone Holes: Pcon's | |
a30e33f0 | 2128 | // A single hole volume gives an overlap with coneinsert, so |
2129 | // three contiguous volumes are created: one to be put in coneinsert | |
2130 | // and two in the cone carbon fiber envelope | |
3a299c65 | 2131 | Double_t holePhi; |
2132 | holePhi = (kCoolingHoleWidth/kCoolingHoleRmin)*TMath::RadToDeg(); | |
2133 | ||
2134 | TGeoPcon *coolingholeshape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
2135 | ||
2136 | coolingholeshape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight; | |
2137 | coolingholeshape->Rmax(0) = coolingholeshape->GetRmin(0); | |
a30e33f0 | 2138 | coolingholeshape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, |
3a299c65 | 2139 | coolingholeshape->GetRmin(0)); |
2140 | ||
2141 | coolingholeshape->Rmax(1) = coolingholeshape->GetRmax(0); | |
a30e33f0 | 2142 | coolingholeshape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, |
3a299c65 | 2143 | coolingholeshape->GetRmax(1)); |
a30e33f0 | 2144 | coolingholeshape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta, |
3a299c65 | 2145 | coolingholeshape->GetZ(1)); |
2146 | ||
2147 | coolingholeshape->Rmin(2) = kCoolingHoleRmin; | |
a30e33f0 | 2148 | coolingholeshape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, |
3a299c65 | 2149 | coolingholeshape->GetRmin(2)); |
a30e33f0 | 2150 | coolingholeshape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta, |
3a299c65 | 2151 | coolingholeshape->GetZ(2)); |
2152 | ||
2153 | coolingholeshape->Rmin(3) = coolingholeshape->GetRmin(2); | |
2154 | coolingholeshape->Rmax(3) = coolingholeshape->GetRmin(3); | |
a30e33f0 | 2155 | coolingholeshape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, |
3a299c65 | 2156 | coolingholeshape->GetRmax(3)); |
2157 | ||
a30e33f0 | 2158 | TGeoPcon *coolinghole2shape = new TGeoPcon(-holePhi/2., holePhi, 4); |
2159 | ||
2160 | coolinghole2shape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight; | |
2161 | coolinghole2shape->Rmax(0) = coolinghole2shape->GetRmin(0); | |
2162 | coolinghole2shape->Z(0) = ZFromRminpCone(coneshape,3,90.-kConeTheta, | |
2163 | coolinghole2shape->GetRmin(0)); | |
2164 | ||
2165 | coolinghole2shape->Rmax(1) = coolinghole2shape->GetRmax(0); | |
2166 | coolinghole2shape->Z(1) = coolingholeshape->GetZ(0); | |
2167 | coolinghole2shape->Rmin(1) = RminFromZpCone(coneshape,3,90.-kConeTheta, | |
2168 | coolinghole2shape->GetZ(1)); | |
2169 | ||
2170 | coolinghole2shape->Rmin(2) = kCoolingHoleRmin; | |
2171 | coolinghole2shape->Z(2) = ZFromRminpCone(coneshape,3,90.-kConeTheta, | |
2172 | coolinghole2shape->GetRmin(2)); | |
2173 | coolinghole2shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta, | |
2174 | coolinghole2shape->GetZ(2)); | |
2175 | ||
2176 | coolinghole2shape->Rmin(3) = coolinghole2shape->GetRmin(2); | |
2177 | coolinghole2shape->Rmax(3) = coolinghole2shape->GetRmin(3); | |
2178 | coolinghole2shape->Z(3) = coolingholeshape->GetZ(2); | |
2179 | ||
2180 | TGeoPcon *coolinghole3shape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
2181 | ||
2182 | coolinghole3shape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight; | |
2183 | coolinghole3shape->Rmax(0) = coolinghole3shape->GetRmin(0); | |
2184 | coolinghole3shape->Z(0) = coolingholeshape->GetZ(1); | |
2185 | ||
2186 | coolinghole3shape->Rmax(1) = coolinghole3shape->GetRmax(0); | |
2187 | coolinghole3shape->Z(1) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta, | |
2188 | coolinghole3shape->GetRmax(1)); | |
2189 | coolinghole3shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta, | |
2190 | coolinghole3shape->GetZ(1)); | |
2191 | ||
2192 | coolinghole3shape->Rmin(2) = kCoolingHoleRmin; | |
2193 | coolinghole3shape->Z(2) = coolingholeshape->GetZ(3); | |
2194 | coolinghole3shape->Rmax(2) = RmaxFromZpCone(coneshape,7,90.-kConeTheta, | |
2195 | coolinghole3shape->GetZ(2)); | |
2196 | ||
2197 | coolinghole3shape->Rmin(3) = coolinghole3shape->GetRmin(2); | |
2198 | coolinghole3shape->Rmax(3) = coolinghole3shape->GetRmin(3); | |
2199 | coolinghole3shape->Z(3) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta, | |
2200 | coolinghole3shape->GetRmax(3)); | |
2201 | ||
2202 | // | |
3a299c65 | 2203 | holePhi = (kMountingHoleWidth/kMountingHoleRmin)*TMath::RadToDeg(); |
2204 | ||
2205 | TGeoPcon *mountingholeshape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
2206 | ||
2207 | mountingholeshape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight; | |
2208 | mountingholeshape->Rmax(0) = mountingholeshape->GetRmin(0); | |
2209 | mountingholeshape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
2210 | mountingholeshape->GetRmin(0)); | |
2211 | ||
2212 | mountingholeshape->Rmin(1) = kMountingHoleRmin; | |
2213 | mountingholeshape->Rmax(1) = mountingholeshape->GetRmax(0); | |
2214 | mountingholeshape->Z(1) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
2215 | mountingholeshape->GetRmin(1)); | |
2216 | ||
2217 | mountingholeshape->Rmin(2) = mountingholeshape->GetRmin(1); | |
2218 | mountingholeshape->Rmax(2) = mountingholeshape->GetRmax(1); | |
2219 | mountingholeshape->Z(2) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
2220 | mountingholeshape->GetRmax(2)); | |
2221 | ||
2222 | mountingholeshape->Rmin(3) = mountingholeshape->GetRmin(2); | |
2223 | mountingholeshape->Rmax(3) = mountingholeshape->GetRmin(3); | |
2224 | mountingholeshape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
2225 | mountingholeshape->GetRmax(3)); | |
2226 | ||
2227 | TGeoPcon *mountinghole2shape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
2228 | ||
2229 | mountinghole2shape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight; | |
2230 | mountinghole2shape->Rmax(0) = mountingholeshape->GetRmin(0); | |
2231 | mountinghole2shape->Z(0) = ZFromRminpCone(coneshape,3,90.-kConeTheta, | |
2232 | mountinghole2shape->GetRmin(0)); | |
2233 | ||
2234 | mountinghole2shape->Rmax(1) = mountinghole2shape->GetRmax(0); | |
2235 | mountinghole2shape->Z(1) = mountingholeshape->Z(0); | |
2236 | mountinghole2shape->Rmin(1) = RminFromZpCone(coneshape,3,90.-kConeTheta, | |
2237 | mountinghole2shape->GetZ(1)); | |
2238 | ||
2239 | mountinghole2shape->Rmin(2) = kMountingHoleRmin; | |
2240 | mountinghole2shape->Z(2) = ZFromRminpCone(coneshape,3,90.-kConeTheta, | |
2241 | mountinghole2shape->GetRmin(2)); | |
2242 | mountinghole2shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta, | |
2243 | mountinghole2shape->GetZ(2)); | |
2244 | ||
2245 | mountinghole2shape->Rmin(3) = mountinghole2shape->Rmin(2); | |
2246 | mountinghole2shape->Rmax(3) = mountinghole2shape->Rmin(3); | |
2247 | mountinghole2shape->Z(3) = mountingholeshape->Z(1); | |
2248 | ||
2249 | TGeoPcon *mountinghole3shape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
2250 | ||
2251 | mountinghole3shape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight; | |
2252 | mountinghole3shape->Rmax(0) = mountingholeshape->GetRmin(0); | |
2253 | mountinghole3shape->Z(0) = mountingholeshape->GetZ(2); | |
2254 | ||
2255 | mountinghole3shape->Rmax(1) = mountinghole3shape->GetRmax(0); | |
2256 | mountinghole3shape->Z(1) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta, | |
2257 | mountinghole3shape->GetRmax(1)); | |
2258 | mountinghole3shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta, | |
2259 | mountinghole3shape->GetZ(1)); | |
2260 | ||
2261 | mountinghole3shape->Rmin(2) = kMountingHoleRmin; | |
2262 | mountinghole3shape->Z(2) = mountingholeshape->Z(3); | |
2263 | mountinghole3shape->Rmax(2) = RmaxFromZpCone(coneshape,7,90.-kConeTheta, | |
2264 | mountinghole3shape->GetZ(2)); | |
2265 | ||
2266 | mountinghole3shape->Rmin(3) = mountinghole3shape->Rmin(2); | |
2267 | mountinghole3shape->Rmax(3) = mountinghole3shape->Rmin(3); | |
2268 | mountinghole3shape->Z(3) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta, | |
2269 | mountinghole3shape->GetRmax(3)); | |
2270 | ||
2271 | // The Cable Hole is even more complicated, a Composite Shape | |
2272 | // is unavoidable here (gosh!) | |
2273 | TGeoPcon *coneshapecopy = new TGeoPcon("conecopy",0.0, 360.0, 12); | |
2274 | ||
2275 | for (Int_t i=0; i<12; i++) { | |
2276 | coneshapecopy->Rmin(i) = coneshape->GetRmin(i); | |
2277 | coneshapecopy->Rmax(i) = coneshape->GetRmax(i); | |
2278 | coneshapecopy->Z(i) = coneshape->GetZ(i); | |
2279 | } | |
2280 | ||
2281 | holePhi = (kCableHoleWidth/kCableHoleRout)*TMath::RadToDeg(); | |
2282 | TGeoConeSeg *chCS = new TGeoConeSeg("chCS", 0.5*kConeZLength, | |
2283 | kCableHoleRin, kCableHoleRout, | |
2284 | kCableHoleRin, kCableHoleRout, | |
2285 | -0.5*holePhi, 0.5*holePhi); | |
2286 | ||
2287 | TGeoCompositeShape *cableholeshape = new TGeoCompositeShape( | |
2288 | "SSDCableHoleShape", | |
2289 | "conecopy*chCS"); | |
2290 | ||
2291 | if(GetDebug(1)){ | |
2292 | chCS->InspectShape(); | |
2293 | cableholeshape->InspectShape(); | |
2294 | } | |
2295 | ||
2296 | // SSD Cone Wings: Tube and TubeSeg shapes | |
2297 | Double_t angleWideWing, angleWideWingThickness; | |
2298 | angleWideWing = (kWingWidth/kWingRmax)*TMath::RadToDeg(); | |
2299 | angleWideWingThickness = (kCFThickness/kWingRmax)*TMath::RadToDeg(); | |
2300 | ||
2301 | TGeoTubeSeg *wingshape = new TGeoTubeSeg(kConeROuterMax, kWingRmax, | |
2302 | kWingHalfThick, | |
2303 | 0, angleWideWing); | |
2304 | ||
2305 | TGeoTubeSeg *winginsertshape = new TGeoTubeSeg(kConeROuterMax, | |
2306 | kWingRmax-kCFThickness, | |
2307 | kWingHalfThick-kCFThickness, | |
2308 | angleWideWingThickness, | |
2309 | angleWideWing-angleWideWingThickness); | |
2310 | ||
2311 | // SDD support plate, SSD side (Mounting Bracket): a TubeSeg | |
2312 | TGeoTubeSeg *bracketshape = new TGeoTubeSeg(kBracketRmin, kBracketRmax, | |
2313 | kBracketHalfLength, -kBracketPhi/2, kBracketPhi/2); | |
2314 | ||
2315 | ||
2316 | // We have the shapes: now create the real volumes | |
2317 | ||
2318 | TGeoVolume *cfcone = new TGeoVolume("SSDCarbonFiberCone", | |
2319 | coneshape,medSSDcf); | |
2320 | cfcone->SetVisibility(kTRUE); | |
2321 | cfcone->SetLineColor(4); // Blue | |
2322 | cfcone->SetLineWidth(1); | |
2323 | cfcone->SetFillColor(cfcone->GetLineColor()); | |
2324 | cfcone->SetFillStyle(4000); // 0% transparent | |
2325 | ||
2326 | TGeoVolume *cfconeinsert = new TGeoVolume("SSDCarbonFiberConeInsert", | |
2327 | coneinsertshape,medSSDste); | |
2328 | cfconeinsert->SetVisibility(kTRUE); | |
2329 | cfconeinsert->SetLineColor(2); // Red | |
2330 | cfconeinsert->SetLineWidth(1); | |
2331 | cfconeinsert->SetFillColor(cfconeinsert->GetLineColor()); | |
2332 | cfconeinsert->SetFillStyle(4050); // 50% transparent | |
2333 | ||
2334 | TGeoVolume *cfconefoam1 = new TGeoVolume("SSDCarbonFiberConeFoam1", | |
2335 | conefoam1shape,medSSDroh); | |
2336 | cfconefoam1->SetVisibility(kTRUE); | |
2337 | cfconefoam1->SetLineColor(3); // Green | |
2338 | cfconefoam1->SetLineWidth(1); | |
2339 | cfconefoam1->SetFillColor(cfconefoam1->GetLineColor()); | |
2340 | cfconefoam1->SetFillStyle(4050); // 50% transparent | |
2341 | ||
2342 | TGeoVolume *cfconefoam2 = new TGeoVolume("SSDCarbonFiberConeFoam2", | |
2343 | conefoam2shape,medSSDroh); | |
2344 | cfconefoam2->SetVisibility(kTRUE); | |
2345 | cfconefoam2->SetLineColor(3); // Green | |
2346 | cfconefoam2->SetLineWidth(1); | |
2347 | cfconefoam2->SetFillColor(cfconefoam2->GetLineColor()); | |
2348 | cfconefoam2->SetFillStyle(4050); // 50% transparent | |
2349 | ||
2350 | TGeoVolume *coolinghole = new TGeoVolume("SSDCoolingHole", | |
2351 | coolingholeshape,medSSDair); | |
2352 | coolinghole->SetVisibility(kTRUE); | |
2353 | coolinghole->SetLineColor(5); // Yellow | |
2354 | coolinghole->SetLineWidth(1); | |
2355 | coolinghole->SetFillColor(coolinghole->GetLineColor()); | |
2356 | coolinghole->SetFillStyle(4090); // 90% transparent | |
2357 | ||
a30e33f0 | 2358 | TGeoVolume *coolinghole2 = new TGeoVolume("SSDCoolingHole2", |
2359 | coolinghole2shape,medSSDair); | |
2360 | coolinghole2->SetVisibility(kTRUE); | |
2361 | coolinghole2->SetLineColor(5); // Yellow | |
2362 | coolinghole2->SetLineWidth(1); | |
2363 | coolinghole2->SetFillColor(coolinghole2->GetLineColor()); | |
2364 | coolinghole2->SetFillStyle(4090); // 90% transparent | |
2365 | ||
2366 | TGeoVolume *coolinghole3 = new TGeoVolume("SSDCoolingHole3", | |
2367 | coolinghole3shape,medSSDair); | |
2368 | coolinghole3->SetVisibility(kTRUE); | |
2369 | coolinghole3->SetLineColor(5); // Yellow | |
2370 | coolinghole3->SetLineWidth(1); | |
2371 | coolinghole3->SetFillColor(coolinghole3->GetLineColor()); | |
2372 | coolinghole3->SetFillStyle(4090); // 90% transparent | |
2373 | ||
3a299c65 | 2374 | TGeoVolume *mountinghole = new TGeoVolume("SSDMountingHole", |
2375 | mountingholeshape,medSSDair); | |
2376 | mountinghole->SetVisibility(kTRUE); | |
2377 | mountinghole->SetLineColor(5); // Yellow | |
2378 | mountinghole->SetLineWidth(1); | |
2379 | mountinghole->SetFillColor(mountinghole->GetLineColor()); | |
2380 | mountinghole->SetFillStyle(4090); // 90% transparent | |
2381 | ||
2382 | TGeoVolume *mountinghole2 = new TGeoVolume("SSDMountingHole2", | |
2383 | mountinghole2shape,medSSDair); | |
2384 | mountinghole2->SetVisibility(kTRUE); | |
2385 | mountinghole2->SetLineColor(5); // Yellow | |
2386 | mountinghole2->SetLineWidth(1); | |
2387 | mountinghole2->SetFillColor(mountinghole2->GetLineColor()); | |
2388 | mountinghole2->SetFillStyle(4090); // 90% transparent | |
2389 | ||
2390 | TGeoVolume *mountinghole3 = new TGeoVolume("SSDMountingHole3", | |
2391 | mountinghole3shape,medSSDair); | |
2392 | mountinghole3->SetVisibility(kTRUE); | |
2393 | mountinghole3->SetLineColor(5); // Yellow | |
2394 | mountinghole3->SetLineWidth(1); | |
2395 | mountinghole3->SetFillColor(mountinghole3->GetLineColor()); | |
2396 | mountinghole3->SetFillStyle(4090); // 90% transparent | |
2397 | ||
2398 | TGeoVolume *wing = new TGeoVolume("SSDWing",wingshape,medSSDcf); | |
2399 | wing->SetVisibility(kTRUE); | |
2400 | wing->SetLineColor(4); // Blue | |
2401 | wing->SetLineWidth(1); | |
2402 | wing->SetFillColor(wing->GetLineColor()); | |
2403 | wing->SetFillStyle(4000); // 0% transparent | |
2404 | ||
2405 | TGeoVolume *cablehole = new TGeoVolume("SSDCableHole", | |
2406 | cableholeshape,medSSDair); | |
2407 | cablehole->SetVisibility(kTRUE); | |
2408 | cablehole->SetLineColor(5); // Yellow | |
2409 | cablehole->SetLineWidth(1); | |
2410 | cablehole->SetFillColor(cablehole->GetLineColor()); | |
2411 | cablehole->SetFillStyle(4090); // 90% transparent | |
2412 | ||
2413 | TGeoVolume *winginsert = new TGeoVolume("SSDWingInsert", | |
2414 | winginsertshape,medSSDste); | |
2415 | winginsert->SetVisibility(kTRUE); | |
2416 | winginsert->SetLineColor(2); // Red | |
2417 | winginsert->SetLineWidth(1); | |
2418 | winginsert->SetFillColor(winginsert->GetLineColor()); | |
2419 | winginsert->SetFillStyle(4050); // 50% transparent | |
2420 | ||
2421 | TGeoVolume *bracket = new TGeoVolume("SSDMountingBracket", | |
2422 | bracketshape,medSSDal); | |
2423 | bracket->SetVisibility(kTRUE); | |
2424 | bracket->SetLineColor(6); // Purple | |
2425 | bracket->SetLineWidth(1); | |
2426 | bracket->SetFillColor(bracket->GetLineColor()); | |
2427 | bracket->SetFillStyle(4000); // 0% transparent | |
2428 | ||
2429 | // Mount up a cone | |
2430 | for (Int_t i=0; i<(Int_t)(360./kMountingHolePhi); i++) { | |
2431 | Double_t phiH = i*kMountingHolePhi + 0.5*kMountingHolePhi; | |
2432 | cfconefoam2->AddNode(mountinghole,i+1, new TGeoRotation("", phiH, 0, 0)); | |
2433 | } | |
2434 | ||
a30e33f0 | 2435 | for (Int_t i=0; i<(Int_t)(360./kCoolingHolePhi); i++) { |
2436 | Double_t phiH = i*kCoolingHolePhi + 0.5*kCoolingHolePhi; | |
2437 | cfconeinsert->AddNodeOverlap(coolinghole,i+1, new TGeoRotation("", phiH, 0, 0)); | |
2438 | } | |
2439 | ||
3a299c65 | 2440 | cfconeinsert->AddNode(cfconefoam1,1,0); |
2441 | cfconeinsert->AddNode(cfconefoam2,1,0); | |
2442 | ||
2443 | cfcone->AddNode(cfconeinsert,1,0); | |
2444 | ||
2445 | for (Int_t i=0; i<(Int_t)(360./kCoolingHolePhi); i++) { | |
2446 | Double_t phiH = i*kCoolingHolePhi + 0.5*kCoolingHolePhi; | |
a30e33f0 | 2447 | cfcone->AddNode(coolinghole2,i+1, new TGeoRotation("", phiH, 0, 0)); |
2448 | cfcone->AddNode(coolinghole3,i+1, new TGeoRotation("", phiH, 0, 0)); | |
3a299c65 | 2449 | cfcone->AddNodeOverlap(cablehole,i+1, new TGeoRotation("", phiH, 0, 0)); |
2450 | } | |
2451 | ||
2452 | for (Int_t i=0; i<(Int_t)(360./kMountingHolePhi); i++) { | |
2453 | Double_t phiH = i*kMountingHolePhi + 0.5*kMountingHolePhi; | |
2454 | cfcone->AddNode(mountinghole2,i+1, new TGeoRotation("", phiH, 0, 0)); | |
2455 | cfcone->AddNode(mountinghole3,i+1, new TGeoRotation("", phiH, 0, 0)); | |
2456 | } | |
2457 | ||
2458 | wing->AddNode(winginsert,1,0); | |
2459 | ||
2460 | // Add all volumes in the Cone assembly | |
2461 | vC->AddNode(cfcone,1,new TGeoTranslation(0,0,-kConeZPosition)); | |
2462 | ||
2463 | for (Int_t i=0; i<4; i++) { | |
85234543 | 2464 | Double_t thetaW = kThetaWing + 90.*i + angleWideWing/2.; |
2465 | vC->AddNode(wing, i+1, new TGeoCombiTrans(0, 0, -kConeZPosition+kWingHalfThick, | |
3a299c65 | 2466 | new TGeoRotation("",thetaW,180,0))); |
2467 | } | |
2468 | ||
2469 | Double_t zBracket = kConeZPosition - coneshape->GetZ(9) + | |
a30e33f0 | 2470 | 2*bracketshape->GetDz(); |
3a299c65 | 2471 | for (Int_t i=0; i<3; i++) { |
2472 | Double_t thetaB = 60 + 120.*i; | |
2473 | vC->AddNode(bracket, i+1, new TGeoCombiTrans(0, 0, -zBracket, | |
2474 | new TGeoRotation("",thetaB,0,0))); | |
2475 | } | |
2476 | ||
2477 | // Finally put everything in the mother volume | |
2478 | moth->AddNode(cfcylinder,1,0); | |
2479 | ||
2480 | moth->AddNode(vC, 1, 0 ); | |
2481 | moth->AddNode(vC, 2, new TGeoRotation("",180, 180, 0) ); | |
2482 | ||
2483 | // Some debugging if requested | |
2484 | if(GetDebug(1)){ | |
2485 | vC->PrintNodes(); | |
2486 | vC->InspectShape(); | |
2487 | } | |
2488 | ||
2489 | return; | |
172b0d90 | 2490 | } |
2491 | ||
2492 | //______________________________________________________________________ | |
543b7370 | 2493 | void AliITSv11GeometrySupport::ServicesCableSupport(TGeoVolume *moth, |
2494 | TGeoManager *mgr){ | |
798b4e0c | 2495 | // |
2496 | // Creates the cable trays which are outside the ITS support cones | |
2497 | // but still inside the TPC | |
2498 | // This is now a stearing routine, the actual work is done by three | |
2499 | // specialized methods to avoid a really huge unique method | |
2500 | // | |
2501 | // Input: | |
2502 | // moth : the TGeoVolume owing the volume structure | |
2503 | // mgr : the GeoManager (default gGeoManager) | |
2504 | // Output: | |
2505 | // | |
2506 | // Created: 15 Nov 2009 Mario Sitta | |
2507 | // | |
2508 | ||
2509 | TraySupportsSideA(moth, mgr); | |
2510 | ||
2511 | ServicesCableSupportSPD(moth, mgr); | |
2512 | ServicesCableSupportSDD(moth, mgr); | |
2513 | ServicesCableSupportSSD(moth, mgr); | |
2514 | ||
2515 | return; | |
2516 | } | |
2517 | ||
2518 | //______________________________________________________________________ | |
2519 | void AliITSv11GeometrySupport::TraySupportsSideA(TGeoVolume *moth, | |
43aefea7 | 2520 | const TGeoManager *mgr){ |
798b4e0c | 2521 | // |
2522 | // Creates the structure supporting the ITS cable trays on Side A | |
2523 | // | |
2524 | // Input: | |
2525 | // moth : the TGeoVolume owing the volume structure | |
2526 | // mgr : the GeoManager (default gGeoManager) | |
2527 | // Output: | |
2528 | // | |
2529 | // Created: 14 Dec 2009 Mario Sitta | |
2530 | // Updated: 26 Feb 2010 Mario Sitta | |
2531 | // | |
2532 | // Technical data are taken from AutoCAD drawings, L.Simonetti technical | |
2533 | // drawings and other (oral) information given by F.Tosello | |
2534 | // | |
2535 | ||
2536 | // Dimensions and positions of the A-Side Cable Tray Support Ring | |
2537 | // (0872/G/A/01) | |
2538 | const Double_t kSuppRingYTrans = 110.00 *fgkmm; | |
2539 | const Double_t kSuppRingZTrans =(1011.00+435.00) *fgkmm; | |
2540 | const Double_t kSuppForwYTrans = 185.00 *fgkmm; | |
2541 | ||
2542 | const Double_t kExtSuppRingSpace1 = 33.00 *fgkmm; | |
2543 | const Double_t kExtSuppRingSpace2 = 45.00 *fgkmm; | |
2544 | const Double_t kExtSuppRingSpcAbov = 30.00 *fgkmm; | |
2545 | const Double_t kExtSuppRingBase = 491.50 *fgkmm; | |
2546 | const Double_t kExtSuppRingInward = 35.00 *fgkmm; | |
2547 | const Double_t kExtSuppRingRmax = 540.00 *fgkmm; | |
2548 | const Double_t kExtSuppRingRint1 = 465.00 *fgkmm; | |
2549 | const Double_t kExtSuppRingRint2 = 467.00 *fgkmm; | |
2550 | const Double_t kExtSuppRingInnerHi = 450.00 *fgkmm; | |
2551 | const Double_t kExtSuppRingInWide = 100.00 *fgkmm; | |
2552 | const Double_t kExtSuppRingR7 = 7.00 *fgkmm; | |
2553 | const Double_t kExtSuppRingR5 = 5.00 *fgkmm; | |
2554 | const Double_t kExtSuppRingThick = 20.00 *fgkmm; | |
2555 | ||
2556 | const Double_t kExtSuppRingSpcAng = 10.50 *TMath::DegToRad(); | |
2557 | const Double_t kExtSuppRingPartPhi = 15.00 *TMath::DegToRad(); | |
2558 | const Double_t kExtSuppRingIntAng = 7.00 *TMath::DegToRad(); | |
2559 | const Double_t kExtSuppRingBaseAng = 75.00 *TMath::DegToRad(); | |
2560 | const Double_t kExtSuppRingR7Ang = 100.00 *TMath::DegToRad(); // Guessed | |
2561 | ||
2562 | const Int_t kExtSuppRingNPtsArc = 10; // N.points to approximate arc | |
2563 | ||
2564 | const Double_t kIntSuppRingThick1 = 15.00 *fgkmm; | |
2565 | const Double_t kIntSuppRingThick2 = 13.00 *fgkmm; | |
2566 | const Double_t kIntSuppRingInward = 24.00 *fgkmm; | |
2567 | const Double_t kIntSuppRingThick = 20.00 *fgkmm; | |
2568 | ||
2569 | const Double_t kSuppCylHeight = 340.00 *fgkmm; | |
2570 | const Double_t kSuppCylRint = 475.00 *fgkmm; | |
2571 | const Double_t kSuppCylRext = 478.00 *fgkmm; | |
2572 | const Double_t kSuppCylDispl = 137.70 *fgkmm; | |
2573 | ||
2574 | const Double_t kSuppSpacerHeight = 30.00 *fgkmm; | |
2575 | const Double_t kSuppSpacerThick = 10.00 *fgkmm; | |
2576 | ||
2577 | const Double_t kSuppSpacerAngle = 15.00; // Degrees | |
2578 | ||
2579 | const Double_t kSuppForwRingRint1 = 500.00 *fgkmm; | |
2580 | const Double_t kSuppForwRingRint2 = 540.00 *fgkmm; | |
2581 | const Double_t kSuppForwRingRext = 560.00 *fgkmm; | |
2582 | const Double_t kSuppForwRingThikAll = 50.00 *fgkmm; | |
2583 | const Double_t kSuppForwRingThikInt = 20.00 *fgkmm; | |
2584 | ||
2585 | // (0872/G/B/01) | |
2586 | const Double_t kSuppForwConeRmin = 558.00 *fgkmm; | |
2587 | const Double_t kSuppForwConeRmax = 681.00 *fgkmm; | |
2588 | const Double_t kSuppForwConeLen1 = 318.00 *fgkmm; | |
2589 | const Double_t kSuppForwConeLen2 = 662.00 *fgkmm; | |
2590 | const Double_t kSuppForwConeThick = 3.00 *fgkmm; | |
2591 | ||
2592 | const Double_t kSuppBackRingPlacTop = 90.00 *fgkmm; | |
2593 | const Double_t kSuppBackRingPlacSid = 50.00 *fgkmm; | |
2594 | const Double_t kSuppBackRingHeight = 760.00 *fgkmm; | |
2595 | const Double_t kSuppBackRingRext = 760.00 *fgkmm; | |
2596 | const Double_t kSuppBackRingRint = 685.00 *fgkmm; | |
2597 | // const Double_t kSuppBackRingRint2 = 675.00 *fgkmm; | |
2598 | const Double_t kSuppBackRingR10 = 10.00 *fgkmm; | |
2599 | const Double_t kSuppBackRingBase = 739.00 *fgkmm; | |
2600 | const Double_t kSuppBackRingThikAll = 50.00 *fgkmm; | |
2601 | const Double_t kSuppBackRingThick1 = 20.00 *fgkmm; | |
2602 | const Double_t kSuppBackRingThick2 = 20.00 *fgkmm; | |
2603 | ||
2604 | // const Double_t kSuppBackRingPlacAng = 10.00 *TMath::DegToRad(); | |
2605 | const Double_t kSuppBackRingPlacAng = 10.25 *TMath::DegToRad();//Fix ovlp. | |
2606 | const Double_t kSuppBackRing2ndAng1 = 78.40 *TMath::DegToRad(); | |
2607 | const Double_t kSuppBackRing2ndAng2 = 45.00 *TMath::DegToRad(); | |
2608 | ||
2609 | const Int_t kSuppBackRingNPtsArc = 10; // N.points to approximate arc | |
2610 | ||
2611 | // (0872/G/C/01) | |
2612 | const Double_t kRearSuppZTransGlob =(1011.00+9315.00-6040.00) *fgkmm; | |
2613 | const Double_t kBackRodZTrans = 2420.00 *fgkmm; | |
2614 | ||
2615 | const Double_t kBackRodLength = 1160.00 *fgkmm; | |
2616 | const Double_t kBackRodThickLen = 20.00 *fgkmm; | |
2617 | const Double_t kBackRodDiameter = 20.00 *fgkmm; | |
2618 | ||
2619 | const Double_t kSuppRearRingRint = 360.00 *fgkmm; | |
2620 | const Double_t kSuppRearRingRext1 = 410.00 *fgkmm; | |
2621 | const Double_t kSuppRearRingRext2 = 414.00 *fgkmm; | |
2622 | const Double_t kSuppRearRingHeight = 397.00 *fgkmm; | |
2623 | const Double_t kSuppRearRingTopWide = 111.87 *fgkmm; | |
2624 | const Double_t kSuppRearRingBase = 451.50 *fgkmm; | |
2625 | const Double_t kSuppRearRingBaseHi = 58.00 *fgkmm; | |
2626 | const Double_t kSuppRearRingSideHi = 52.00 *fgkmm; | |
2627 | const Double_t kSuppRearRingInside = 40.00 *fgkmm; | |
2628 | const Double_t kSuppRearRingInsideHi= 12.00 *fgkmm; | |
2629 | const Double_t kSuppRearRingThick = 20.00 *fgkmm; | |
2630 | const Double_t kSuppRearRingXRodHole= 441.50 *fgkmm; | |
2631 | const Double_t kSuppRearRingYRodHole= 42.00 *fgkmm; | |
2632 | ||
2633 | const Double_t kSuppRearRing1stAng = 22.00 *TMath::DegToRad(); | |
2634 | const Double_t kSuppRearRingStepAng = 15.00 *TMath::DegToRad(); | |
2635 | ||
2636 | const Int_t kSuppRearRingNPtsArc = 10; // N.points to approximate arc | |
2637 | ||
2638 | ||
2639 | // Local variables | |
2640 | Double_t xprof[2*(15+kExtSuppRingNPtsArc)],yprof[2*(15+kExtSuppRingNPtsArc)]; | |
2641 | Double_t slp1, slp2, phi, xm, ym; | |
2642 | Double_t xloc, yloc, zloc, rmin, rmax, deltaR; | |
2643 | Int_t npoints; | |
2644 | ||
2645 | ||
2646 | // The whole support as an assembly | |
2647 | TGeoVolumeAssembly *trayASuppStruct = new TGeoVolumeAssembly("ITSsuppSideAStructure"); | |
2648 | ||
2649 | ||
2650 | // First create all needed shapes | |
2651 | ||
2652 | // The External Ring (part of 0872/G/A/01): a really complex Xtru | |
2653 | TGeoXtru *extSuppRing = new TGeoXtru(2); | |
2654 | ||
2655 | // First the upper notch... | |
2656 | xprof[ 0] = kExtSuppRingSpace1; | |
2657 | yprof[ 0] = kExtSuppRingInnerHi + kExtSuppRingSpcAbov; | |
2658 | ||
2659 | slp1 = TMath::Tan(TMath::Pi()/2 - kExtSuppRingSpcAng); | |
2660 | IntersectCircle(slp1, xprof[0], yprof[0], kExtSuppRingRmax, 0., 0., | |
2661 | xprof[5], yprof[5], xm, ym); // Ignore dummy xm,ym | |
2662 | ||
2663 | xprof[ 4] = xprof[5]; | |
2664 | yprof[ 4] = yprof[5] - kExtSuppRingR5/TMath::Tan(kExtSuppRingSpcAng); | |
2665 | xprof[ 3] = xprof[4] - kExtSuppRingR5*(1 - TMath::Cos(TMath::Pi()/6)); | |
2666 | yprof[ 3] = yprof[4] - kExtSuppRingR5*( TMath::Sin(TMath::Pi()/6)); | |
2667 | xprof[ 2] = xprof[4] - kExtSuppRingR5*(1 - TMath::Cos(TMath::Pi()/3)); | |
2668 | yprof[ 2] = yprof[4] - kExtSuppRingR5*( TMath::Sin(TMath::Pi()/3)); | |
2669 | xprof[ 1] = xprof[4] - kExtSuppRingR5; | |
2670 | yprof[ 1] = yprof[4] - kExtSuppRingR5; | |
2671 | ||
2672 | Int_t indx = 5+kExtSuppRingNPtsArc; | |
2673 | // ...then the external arc, approximated with segments,... | |
2674 | xprof[indx] = kExtSuppRingBase; | |
2675 | yprof[indx] = TMath::Sqrt(kExtSuppRingRmax*kExtSuppRingRmax - | |
2676 | kExtSuppRingBase*kExtSuppRingBase); | |
2677 | Double_t alphamin = TMath::ASin(kExtSuppRingSpace2/kExtSuppRingRmax); | |
2678 | Double_t alphamax = TMath::Pi()/2 - | |
2679 | TMath::ASin(yprof[5+kExtSuppRingNPtsArc]/kExtSuppRingRmax); | |
2680 | ||
2681 | for (Int_t jp = 1; jp < kExtSuppRingNPtsArc; jp++) { | |
2682 | Double_t alpha = jp*(alphamax-alphamin)/kExtSuppRingNPtsArc; | |
2683 | xprof[5+jp] = kExtSuppRingRmax*TMath::Sin(alpha); | |
2684 | yprof[5+jp] = kExtSuppRingRmax*TMath::Cos(alpha); | |
2685 | } | |
2686 | // ...and finally the interior profile | |
2687 | xprof[indx+1] = kExtSuppRingBase; | |
2688 | yprof[indx+1] = kSuppRingYTrans; | |
2689 | xprof[indx+2] = xprof[indx+1] - kExtSuppRingInward; | |
2690 | yprof[indx+2] = yprof[indx+1]; | |
2691 | ||
2692 | phi = TMath::Pi()/2 - 4*kExtSuppRingPartPhi - kExtSuppRingIntAng; | |
2693 | slp1 = TMath::Tan(TMath::Pi() - kExtSuppRingBaseAng); | |
2694 | slp2 = TMath::Tan(TMath::Pi()/2 + phi); | |
2695 | xm = kExtSuppRingRint2*TMath::Cos(phi); | |
2696 | ym = kExtSuppRingRint2*TMath::Sin(phi); | |
2697 | IntersectLines(slp1, xprof[indx+2], yprof[indx+2], slp2, xm, ym, | |
2698 | xprof[indx+3], yprof[indx+3]); | |
2699 | ||
2700 | slp1 = slp2; | |
2701 | phi += kExtSuppRingPartPhi; | |
2702 | slp2 = TMath::Tan(TMath::Pi()/2 + phi); | |
2703 | xm = kExtSuppRingRint1*TMath::Cos(phi); | |
2704 | ym = kExtSuppRingRint1*TMath::Sin(phi); | |
2705 | IntersectLines(slp1, xprof[indx+3], yprof[indx+3], slp2, xm, ym, | |
2706 | xprof[indx+4], yprof[indx+4]); | |
2707 | ||
2708 | slp1 = slp2; | |
2709 | phi += kExtSuppRingPartPhi; | |
2710 | slp2 = TMath::Tan(TMath::Pi()/2 + phi); | |
2711 | xm = kExtSuppRingRint2*TMath::Cos(phi); | |
2712 | ym = kExtSuppRingRint2*TMath::Sin(phi); | |
2713 | IntersectLines(slp1, xprof[indx+4], yprof[indx+4], slp2, xm, ym, | |
2714 | xprof[indx+5], yprof[indx+5]); | |
2715 | ||
2716 | slp1 = slp2; | |
2717 | phi += kExtSuppRingPartPhi; | |
2718 | slp2 = TMath::Tan(TMath::Pi()/2 + phi); | |
2719 | xm = kExtSuppRingRint1*TMath::Cos(phi); | |
2720 | ym = kExtSuppRingRint1*TMath::Sin(phi); | |
2721 | IntersectLines(slp1, xprof[indx+5], yprof[indx+5], slp2, xm, ym, | |
2722 | xprof[indx+6], yprof[indx+6]); | |
2723 | ||
2724 | xprof[indx+9] = kExtSuppRingInWide; | |
2725 | yprof[indx+9] = kExtSuppRingInnerHi; | |
2726 | xprof[indx+8] = xprof[indx+9] + | |
2727 | (1 - TMath::Cos(kExtSuppRingR7Ang/2))*kExtSuppRingR7; | |
2728 | yprof[indx+8] = yprof[indx+9] + | |
2729 | ( TMath::Sin(kExtSuppRingR7Ang/2))*kExtSuppRingR7; | |
2730 | xprof[indx+7] = xprof[indx+9] + | |
2731 | (1 + TMath::Cos(kExtSuppRingR7Ang ))*kExtSuppRingR7; | |
2732 | yprof[indx+7] = yprof[indx+9] + | |
2733 | ( TMath::Sin(kExtSuppRingR7Ang ))*kExtSuppRingR7; | |
2734 | // Gosh, we did the right side! now reflex on the left side | |
2735 | npoints = (sizeof(xprof)/sizeof(Double_t))/2; | |
2736 | for (Int_t jp = 0; jp < npoints; jp++) { | |
2737 | xprof[npoints+jp] = -xprof[npoints-1-jp]; | |
2738 | yprof[npoints+jp] = yprof[npoints-1-jp]; | |
2739 | } | |
2740 | // wow! now the actual Xtru | |
2741 | extSuppRing->DefinePolygon(2*npoints, xprof, yprof); | |
2742 | extSuppRing->DefineSection(0,0); | |
2743 | extSuppRing->DefineSection(1,kExtSuppRingThick); | |
2744 | ||
2745 | // The Internal Ring (part of 0872/G/A/01): another complex Xtru | |
2746 | TGeoXtru *intSuppRing = new TGeoXtru(2); | |
2747 | ||
2748 | // First the external profile... | |
2749 | npoints = 0; | |
2750 | ||
2751 | slp1 = 0; | |
2752 | phi = TMath::Pi()/2 - kExtSuppRingPartPhi - kExtSuppRingIntAng; | |
2753 | slp2 = TMath::Tan(TMath::Pi()/2 + phi); | |
2754 | xm = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Cos(phi); | |
2755 | ym = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Sin(phi); | |
2756 | IntersectLines(slp1, 0, kExtSuppRingInnerHi+kExtSuppRingSpcAbov, | |
2757 | slp2, xm, ym, | |
2758 | xprof[npoints], yprof[npoints]); | |
2759 | npoints++; | |
2760 | ||
2761 | slp1 = slp2; | |
2762 | phi -= kExtSuppRingPartPhi; | |
2763 | slp2 = TMath::Tan(TMath::Pi()/2 + phi); | |
2764 | xm = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Cos(phi); | |
2765 | ym = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Sin(phi); | |
2766 | IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1], | |
2767 | slp2, xm, ym, | |
2768 | xprof[npoints], yprof[npoints]); | |
2769 | npoints++; | |
2770 | ||
2771 | slp1 = slp2; | |
2772 | phi -= kExtSuppRingPartPhi; | |
2773 | slp2 = TMath::Tan(TMath::Pi()/2 + phi); | |
2774 | xm = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Cos(phi); | |
2775 | ym = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Sin(phi); | |
2776 | IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1], | |
2777 | slp2, xm, ym, | |
2778 | xprof[npoints], yprof[npoints]); | |
2779 | npoints++; | |
2780 | ||
2781 | slp1 = slp2; | |
2782 | phi -= kExtSuppRingPartPhi; | |
2783 | slp2 = TMath::Tan(TMath::Pi()/2 + phi); | |
2784 | xm = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Cos(phi); | |
2785 | ym = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Sin(phi); | |
2786 | IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1], | |
2787 | slp2, xm, ym, | |
2788 | xprof[npoints], yprof[npoints]); | |
2789 | npoints++; | |
2790 | ||
2791 | xprof[npoints] = kExtSuppRingBase-kIntSuppRingInward; | |
2792 | yprof[npoints] = Yfrom2Points(xprof[npoints-1], yprof[npoints-1], xm, ym, | |
2793 | xprof[npoints]); | |
2794 | npoints++; | |
2795 | ||
2796 | xprof[npoints] = xprof[npoints-1]; | |
2797 | yprof[npoints] = kSuppRingYTrans; | |
2798 | npoints++; | |
2799 | // ...and then the interior profile, which is identical to extSuppRing one | |
2800 | for (Int_t jp=0; jp < 8; jp++) { | |
2801 | xprof[npoints] = extSuppRing->GetX(17+jp); | |
2802 | yprof[npoints] = extSuppRing->GetY(17+jp); | |
2803 | npoints++; | |
2804 | } | |
2805 | // We did the right side! now reflex on the left side | |
2806 | for (Int_t jp = 0; jp < npoints; jp++) { | |
2807 | xprof[npoints+jp] = -xprof[npoints-1-jp]; | |
2808 | yprof[npoints+jp] = yprof[npoints-1-jp]; | |
2809 | } | |
2810 | // And now the actual Xtru | |
2811 | intSuppRing->DefinePolygon(2*npoints, xprof, yprof); | |
2812 | intSuppRing->DefineSection(0,0); | |
2813 | intSuppRing->DefineSection(1,kIntSuppRingThick); | |
2814 | ||
2815 | // The intermediate cylinder (0872/G/A/03): a TubeSeg | |
2816 | alphamin = TMath::ASin(kSuppCylDispl/kSuppCylRint)*TMath::RadToDeg(); | |
2817 | alphamax = 180 - alphamin; | |
2818 | TGeoTubeSeg *interCylind = new TGeoTubeSeg(kSuppCylRint, kSuppCylRext, | |
2819 | kSuppCylHeight/2, alphamin, alphamax); | |
2820 | ||
2821 | // The spacer (0872/G/A/03): a simple Xtru | |
2822 | TGeoXtru *suppSpacer = new TGeoXtru(2); | |
2823 | ||
2824 | xprof[0] = kSuppSpacerHeight; | |
2825 | yprof[0] = kSuppSpacerThick; | |
2826 | xprof[1] = xprof[0]; | |
2827 | yprof[1] = 0; | |
2828 | xprof[2] = 0; | |
2829 | yprof[2] = 0; | |
2830 | xprof[3] = kSuppSpacerThick*SinD(kSuppSpacerAngle); | |
2831 | yprof[3] = yprof[0]; | |
2832 | ||
2833 | suppSpacer->DefinePolygon(4, xprof, yprof); | |
2834 | suppSpacer->DefineSection(0,-kSuppCylHeight/2); | |
2835 | suppSpacer->DefineSection(1, kSuppCylHeight/2); | |
2836 | ||
2837 | // The forward ring (0872/G/B/02): a Pcon (slight oversimplification) | |
2838 | Double_t rmean = (kSuppForwRingRint1+kSuppForwRingRext)/2; | |
2839 | alphamin = TMath::ASin(kSuppForwYTrans/rmean)*TMath::RadToDeg(); | |
2840 | alphamax = 180 - alphamin; | |
2841 | ||
2842 | TGeoPcon *forwardRing = new TGeoPcon(alphamin,alphamax-alphamin,4); | |
2843 | ||
2844 | forwardRing->DefineSection(0,0, | |
2845 | kSuppForwRingRint1,kSuppForwRingRext); | |
2846 | forwardRing->DefineSection(1,kSuppForwRingThikInt, | |
2847 | kSuppForwRingRint1,kSuppForwRingRext); | |
2848 | forwardRing->DefineSection(2,kSuppForwRingThikInt, | |
2849 | kSuppForwRingRint2,kSuppForwRingRext); | |
2850 | forwardRing->DefineSection(3,kSuppForwRingThikAll, | |
2851 | kSuppForwRingRint2,kSuppForwRingRext); | |
2852 | ||
2853 | // The forward cone (0872/G/B/03): a TGeoPcon | |
2854 | TGeoPcon *forwardCone = new TGeoPcon(alphamin,alphamax-alphamin,3); | |
2855 | ||
2856 | forwardCone->DefineSection(0,0, | |
2857 | kSuppForwConeRmin-kSuppForwConeThick, | |
2858 | kSuppForwConeRmin); | |
2859 | forwardCone->DefineSection(1,kSuppForwConeLen1, | |
2860 | kSuppForwConeRmin-kSuppForwConeThick, | |
2861 | kSuppForwConeRmin); | |
2862 | forwardCone->DefineSection(2,kSuppForwConeLen1+kSuppForwConeLen2, | |
2863 | kSuppForwConeRmax-kSuppForwConeThick, | |
2864 | kSuppForwConeRmax); | |
2865 | ||
2866 | // The first part of the Back Ring (part of 0872/G/B/01): a complex Xtru | |
2867 | TGeoXtru *firstSuppBackRing = new TGeoXtru(2); | |
2868 | ||
2869 | // First the external profile... (the arc is approximated with segments) | |
2870 | npoints = 0; | |
2871 | ||
2872 | xprof[npoints] = kSuppBackRingPlacTop; | |
2873 | yprof[npoints] = kSuppBackRingHeight; | |
2874 | npoints++; | |
2875 | ||
2876 | alphamax = TMath::Pi()/2 - TMath::ASin(kSuppBackRingPlacTop/kSuppBackRingRext); | |
2877 | alphamin = TMath::ASin((kSuppForwYTrans+kSuppBackRingPlacSid)/kSuppBackRingRext); | |
2878 | ||
2879 | xprof[npoints] = xprof[npoints-1]; | |
2880 | yprof[npoints] = kSuppBackRingRext*TMath::Sin(alphamax); | |
2881 | npoints++; | |
2882 | ||
2883 | for (Int_t jp = 1; jp <= kSuppBackRingNPtsArc; jp++) { | |
2884 | Double_t alpha = alphamax - jp*(alphamax-alphamin)/kSuppBackRingNPtsArc; | |
2885 | xprof[npoints] = kSuppBackRingRext*TMath::Cos(alpha); | |
2886 | yprof[npoints] = kSuppBackRingRext*TMath::Sin(alpha); | |
2887 | npoints++; | |
2888 | } | |
2889 | ||
2890 | xprof[npoints] = kSuppBackRingBase - | |
2891 | kSuppBackRingPlacSid*TMath::Tan(kSuppBackRingPlacAng); | |
2892 | yprof[npoints] = yprof[npoints-1]; | |
2893 | npoints++; | |
2894 | ||
2895 | xprof[npoints] = kSuppBackRingBase; | |
2896 | yprof[npoints] = kSuppForwYTrans; | |
2897 | npoints++; | |
2898 | // ...then the internal profile (the arc is approximated with segments) | |
2899 | alphamin = TMath::ASin(kSuppForwYTrans/kSuppBackRingRint); | |
2900 | alphamax = TMath::Pi()/2; | |
2901 | ||
2902 | for (Int_t jp = 0; jp < kSuppBackRingNPtsArc; jp++) { | |
2903 | Double_t alpha = alphamin + jp*(alphamax-alphamin)/kSuppBackRingNPtsArc; | |
2904 | xprof[npoints] = kSuppBackRingRint*TMath::Cos(alpha); | |
2905 | yprof[npoints] = kSuppBackRingRint*TMath::Sin(alpha); | |
2906 | npoints++; | |
2907 | } | |
2908 | ||
2909 | xprof[npoints] = 0; | |
2910 | yprof[npoints] = kSuppBackRingRint; | |
2911 | npoints++; | |
2912 | // We did the right side! now reflex on the left side (except last point) | |
2913 | for (Int_t jp = 0; jp < npoints-1; jp++) { | |
2914 | xprof[npoints+jp] = -xprof[npoints-jp-2]; | |
2915 | yprof[npoints+jp] = yprof[npoints-jp-2]; | |
2916 | } | |
2917 | // And now the actual Xtru | |
2918 | firstSuppBackRing->DefinePolygon(2*npoints-1, xprof, yprof); | |
2919 | firstSuppBackRing->DefineSection(0,0); | |
2920 | firstSuppBackRing->DefineSection(1,kSuppBackRingThick1); | |
2921 | ||
2922 | // The second part of the Back Ring (part of 0872/G/B/01): a Pcon | |
2923 | // (slight oversimplification) | |
2924 | alphamin = TMath::ASin(kSuppForwYTrans/kSuppBackRingRint)*TMath::RadToDeg(); | |
2925 | alphamax = 180 - alphamin; | |
2926 | ||
2927 | TGeoPcon *secondSuppBackRing = new TGeoPcon(alphamin,alphamax-alphamin,6); | |
2928 | ||
2929 | deltaR = kSuppBackRingThick2/TMath::Sin(kSuppBackRing2ndAng1); | |
2930 | rmin = kSuppBackRingRint - kSuppBackRingThick1/TMath::Tan(kSuppBackRing2ndAng1); | |
2931 | rmax = rmin + deltaR + kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1); | |
2932 | secondSuppBackRing->DefineSection(0, 0, rmin, rmax); | |
2933 | ||
2934 | zloc = kSuppBackRingR10*(1 - TMath::Cos(kSuppBackRing2ndAng1/3)); | |
2935 | rmax -= kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1/3); | |
2936 | rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1); | |
2937 | secondSuppBackRing->DefineSection(1, zloc, rmin, rmax); | |
2938 | ||
2939 | zloc = kSuppBackRingR10*(1 - TMath::Cos(kSuppBackRing2ndAng1*2/3)); | |
2940 | rmax = secondSuppBackRing->GetRmax(0) - kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1*2/3); | |
2941 | rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1); | |
2942 | secondSuppBackRing->DefineSection(2, zloc, rmin, rmax); | |
2943 | ||
2944 | zloc = kSuppBackRingR10*(1 - TMath::Cos(kSuppBackRing2ndAng1)); | |
2945 | rmax = secondSuppBackRing->GetRmax(0) - kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1); | |
2946 | rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1); | |
2947 | secondSuppBackRing->DefineSection(3, zloc, rmin, rmax); | |
2948 | ||
2949 | slp1 = TMath::Tan(kSuppBackRing2ndAng2); | |
2950 | slp2 = TMath::Tan(TMath::Pi()/2 + kSuppBackRing2ndAng1); | |
2951 | IntersectLines(-slp1,kSuppBackRingThikAll,deltaR/2, | |
2952 | slp2,kSuppBackRingThikAll,deltaR, | |
2953 | xm, ym); | |
2954 | ||
2955 | zloc = xm - kSuppBackRingThick1; | |
2956 | rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1); | |
2957 | rmax = rmin + deltaR; | |
2958 | secondSuppBackRing->DefineSection(4, zloc, rmin, rmax); | |
2959 | ||
2960 | zloc = kSuppBackRingThikAll - kSuppBackRingThick1; | |
2961 | rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1); | |
2962 | rmax = rmin + deltaR/2; | |
2963 | secondSuppBackRing->DefineSection(5, zloc, rmin, rmax); | |
2964 | ||
2965 | // The supporting rod: a Tube | |
2966 | TGeoTube *suppRod = new TGeoTube(0, kBackRodDiameter/2, | |
2967 | (kBackRodLength - kBackRodThickLen)/2); | |
2968 | ||
2969 | // The Back Ring (0872/G/C/01): another complex Xtru | |
2970 | TGeoXtru *suppRearRing = new TGeoXtru(2); | |
2971 | ||
2972 | // First the external profile... | |
2973 | npoints = 0; | |
2974 | ||
2975 | xprof[npoints] = kSuppRearRingTopWide; | |
2976 | yprof[npoints] = kSuppRearRingHeight; | |
2977 | npoints++; | |
2978 | ||
2979 | phi = kSuppRearRing1stAng; | |
2980 | slp1 = TMath::Tan(TMath::Pi() - phi); | |
2981 | phi += kSuppRearRingStepAng; | |
2982 | slp2 = TMath::Tan(TMath::Pi() - phi); | |
2983 | xm = kSuppRearRingRext2*TMath::Sin(phi); | |
2984 | ym = kSuppRearRingRext2*TMath::Cos(phi); | |
2985 | IntersectLines(slp1, kSuppRearRingTopWide, kSuppRearRingHeight, | |
2986 | slp2, xm, ym, | |
2987 | xprof[npoints], yprof[npoints]); | |
2988 | npoints++; | |
2989 | ||
2990 | slp1 = slp2; | |
2991 | phi += kSuppRearRingStepAng; | |
2992 | slp2 = TMath::Tan(TMath::Pi() - phi); | |
2993 | xm = kSuppRearRingRext1*TMath::Sin(phi); | |
2994 | ym = kSuppRearRingRext1*TMath::Cos(phi); | |
2995 | IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1], | |
2996 | slp2, xm, ym, | |
2997 | xprof[npoints], yprof[npoints]); | |
2998 | npoints++; | |
2999 | ||
3000 | slp1 = slp2; | |
3001 | phi += kSuppRearRingStepAng; | |
3002 | slp2 = TMath::Tan(TMath::Pi() - phi); | |
3003 | xm = kSuppRearRingRext2*TMath::Sin(phi); | |
3004 | ym = kSuppRearRingRext2*TMath::Cos(phi); | |
3005 | IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1], | |
3006 | slp2, xm, ym, | |
3007 | xprof[npoints], yprof[npoints]); | |
3008 | npoints++; | |
3009 | ||
3010 | slp1 = slp2; | |
3011 | slp2 = 0; | |
3012 | xm = kSuppRearRingBase; | |
3013 | ym = kSuppRearRingBaseHi + kSuppRearRingSideHi; | |
3014 | IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1], | |
3015 | slp2, xm, ym, | |
3016 | xprof[npoints], yprof[npoints]); | |
3017 | npoints++; | |
3018 | ||
3019 | xprof[npoints] = kSuppRearRingBase; | |
3020 | yprof[npoints] = kSuppRearRingBaseHi + kSuppRearRingSideHi; | |
3021 | npoints++; | |
3022 | xprof[npoints] = xprof[npoints - 1]; | |
3023 | yprof[npoints] = kSuppRearRingBaseHi; | |
3024 | npoints++; | |
3025 | xprof[npoints] = xprof[npoints - 1] - kSuppRearRingInside; | |
3026 | yprof[npoints] = yprof[npoints - 1]; | |
3027 | npoints++; | |
3028 | xprof[npoints] = xprof[npoints - 1]; | |
3029 | yprof[npoints] = yprof[npoints - 1] + kSuppRearRingInsideHi; | |
3030 | npoints++; | |
3031 | // ...then the internal arc, approximated with segments,... | |
3032 | xprof[npoints] = kSuppRearRingRint; | |
3033 | yprof[npoints] = yprof[npoints - 1]; | |
3034 | ||
3035 | alphamin = TMath::ASin(kSuppRearRingBaseHi/kSuppRearRingRint); | |
3036 | alphamax = TMath::Pi()/2; | |
3037 | ||
3038 | for (Int_t jp = 1; jp < kSuppRearRingNPtsArc; jp++) { | |
3039 | Double_t alpha = alphamin + jp*(alphamax-alphamin)/kSuppRearRingNPtsArc; | |
3040 | xprof[npoints+jp] = kSuppRearRingRint*TMath::Cos(alpha); | |
3041 | yprof[npoints+jp] = kSuppRearRingRint*TMath::Sin(alpha); | |
3042 | } | |
3043 | ||
3044 | xprof[npoints+kSuppRearRingNPtsArc] = 0; | |
3045 | yprof[npoints+kSuppRearRingNPtsArc] = kSuppRearRingRint; | |
3046 | // We did the right side! now reflex on the left side | |
3047 | Int_t nTotalPoints = npoints+kSuppRearRingNPtsArc; | |
3048 | for (Int_t jp = 0; jp < nTotalPoints; jp++) { | |
3049 | xprof[nTotalPoints+1+jp] = -xprof[nTotalPoints-1-jp]; | |
3050 | yprof[nTotalPoints+1+jp] = yprof[nTotalPoints-1-jp]; | |
3051 | } | |
3052 | ||
3053 | // And now the actual Xtru | |
3054 | suppRearRing->DefinePolygon(2*nTotalPoints+1, xprof, yprof); | |
3055 | suppRearRing->DefineSection(0,0); | |
3056 | suppRearRing->DefineSection(1,kSuppRearRingThick); | |
3057 | ||
3058 | ||
3059 | // We have all shapes: now create the real volumes | |
3060 | TGeoMedium *medAl = mgr->GetMedium("ITS_ANTICORODAL$"); | |
3061 | ||
3062 | TGeoVolume *sideAExtSuppRing = new TGeoVolume("ITSsuppSideAExtSuppRing", | |
3063 | extSuppRing, medAl); | |
3064 | ||
3065 | sideAExtSuppRing->SetVisibility(kTRUE); | |
3066 | sideAExtSuppRing->SetLineColor(kMagenta+1); | |
3067 | sideAExtSuppRing->SetLineWidth(1); | |
3068 | sideAExtSuppRing->SetFillColor(sideAExtSuppRing->GetLineColor()); | |
3069 | sideAExtSuppRing->SetFillStyle(4000); // 0% transparent | |
3070 | ||
3071 | TGeoVolume *sideAIntSuppRing = new TGeoVolume("ITSsuppSideAIntSuppRing", | |
3072 | intSuppRing, medAl); | |
3073 | ||
3074 | sideAIntSuppRing->SetVisibility(kTRUE); | |
3075 | sideAIntSuppRing->SetLineColor(kMagenta+1); | |
3076 | sideAIntSuppRing->SetLineWidth(1); | |
3077 | sideAIntSuppRing->SetFillColor(sideAIntSuppRing->GetLineColor()); | |
3078 | sideAIntSuppRing->SetFillStyle(4000); // 0% transparent | |
3079 | ||
3080 | TGeoVolume *sideASuppCyl = new TGeoVolume("ITSsuppSideASuppCyl", | |
3081 | interCylind, medAl); | |
3082 | ||
3083 | sideASuppCyl->SetVisibility(kTRUE); | |
3084 | sideASuppCyl->SetLineColor(kMagenta+1); | |
3085 | sideASuppCyl->SetLineWidth(1); | |
3086 | sideASuppCyl->SetFillColor(sideASuppCyl->GetLineColor()); | |
3087 | sideASuppCyl->SetFillStyle(4000); // 0% transparent | |
3088 | ||
3089 | TGeoVolume *sideASuppSpacer = new TGeoVolume("ITSsuppSideASuppSpacer", | |
3090 | suppSpacer, medAl); | |
3091 | ||
3092 | sideASuppSpacer->SetVisibility(kTRUE); | |
3093 | sideASuppSpacer->SetLineColor(kMagenta+1); | |
3094 | sideASuppSpacer->SetLineWidth(1); | |
3095 | sideASuppSpacer->SetFillColor(sideASuppSpacer->GetLineColor()); | |
3096 | sideASuppSpacer->SetFillStyle(4000); // 0% transparent | |
3097 | ||
3098 | TGeoVolume *sideASuppForwRing = new TGeoVolume("ITSsuppSideASuppForwRing", | |
3099 | forwardRing, medAl); | |
3100 | ||
3101 | sideASuppForwRing->SetVisibility(kTRUE); | |
3102 | sideASuppForwRing->SetLineColor(kMagenta+1); | |
3103 | sideASuppForwRing->SetLineWidth(1); | |
3104 | sideASuppForwRing->SetFillColor(sideASuppForwRing->GetLineColor()); | |
3105 | sideASuppForwRing->SetFillStyle(4000); // 0% transparent | |
3106 | ||
3107 | TGeoVolume *sideASuppForwCone = new TGeoVolume("ITSsuppSideASuppForwCone", | |
3108 | forwardCone, medAl); | |
3109 | ||
3110 | sideASuppForwCone->SetVisibility(kTRUE); | |
3111 | sideASuppForwCone->SetLineColor(kMagenta+1); | |
3112 | sideASuppForwCone->SetLineWidth(1); | |
3113 | sideASuppForwCone->SetFillColor(sideASuppForwCone->GetLineColor()); | |
3114 | sideASuppForwCone->SetFillStyle(4000); // 0% transparent | |
3115 | ||
3116 | TGeoVolume *sideAFirstSuppBackRing = new TGeoVolume("ITSsuppSideAFirstSuppBackRing", | |
3117 | firstSuppBackRing, medAl); | |
3118 | ||
3119 | sideAFirstSuppBackRing->SetVisibility(kTRUE); | |
3120 | sideAFirstSuppBackRing->SetLineColor(kMagenta+1); | |
3121 | sideAFirstSuppBackRing->SetLineWidth(1); | |
3122 | sideAFirstSuppBackRing->SetFillColor(sideAFirstSuppBackRing->GetLineColor()); | |
3123 | sideAFirstSuppBackRing->SetFillStyle(4000); // 0% transparent | |
3124 | ||
3125 | TGeoVolume *sideASecondSuppBackRing = new TGeoVolume("ITSsuppSideASecondSuppBackRing", | |
3126 | secondSuppBackRing, medAl); | |
3127 | ||
3128 | sideASecondSuppBackRing->SetVisibility(kTRUE); | |
3129 | sideASecondSuppBackRing->SetLineColor(kMagenta+1); | |
3130 | sideASecondSuppBackRing->SetLineWidth(1); | |
3131 | sideASecondSuppBackRing->SetFillColor(sideASecondSuppBackRing->GetLineColor()); | |
3132 | sideASecondSuppBackRing->SetFillStyle(4000); // 0% transparent | |
3133 | ||
3134 | TGeoVolume *sideASuppRod = new TGeoVolume("ITSsuppSideASuppRod", | |
3135 | suppRod, medAl); | |
3136 | ||
3137 | sideASuppRod->SetVisibility(kTRUE); | |
3138 | sideASuppRod->SetLineColor(kMagenta+1); | |
3139 | sideASuppRod->SetLineWidth(1); | |
3140 | sideASuppRod->SetFillColor(sideASuppRod->GetLineColor()); | |
3141 | sideASuppRod->SetFillStyle(4000); // 0% transparent | |
3142 | ||
3143 | TGeoVolume *sideASuppRearRing = new TGeoVolume("ITSsuppSideASuppRearRing", | |
3144 | suppRearRing, medAl); | |
3145 | ||
3146 | sideASuppRearRing->SetVisibility(kTRUE); | |
3147 | sideASuppRearRing->SetLineColor(kMagenta+1); | |
3148 | sideASuppRearRing->SetLineWidth(1); | |
3149 | sideASuppRearRing->SetFillColor(sideASuppRearRing->GetLineColor()); | |
3150 | sideASuppRearRing->SetFillStyle(4000); // 0% transparent | |
3151 | ||
3152 | ||
3153 | // Now build up the support structure | |
3154 | zloc = kSuppRingZTrans; | |
3155 | trayASuppStruct->AddNode(sideAExtSuppRing, 1, | |
3156 | new TGeoTranslation(0, 0, zloc) ); | |
3157 | trayASuppStruct->AddNode(sideAExtSuppRing, 2, | |
3158 | new TGeoCombiTrans( 0, 0, zloc, | |
3159 | new TGeoRotation("",180,0,0))); | |
3160 | ||
3161 | zloc += kExtSuppRingThick; | |
3162 | trayASuppStruct->AddNode(sideAIntSuppRing, 1, | |
3163 | new TGeoTranslation(0, 0, zloc) ); | |
3164 | trayASuppStruct->AddNode(sideAIntSuppRing, 2, | |
3165 | new TGeoCombiTrans( 0, 0, zloc, | |
3166 | new TGeoRotation("",180,0,0))); | |
3167 | ||
3168 | xloc = kExtSuppRingBase - kIntSuppRingInward; | |
3169 | yloc = kSuppRingYTrans; | |
3170 | zloc += (kIntSuppRingThick + kSuppCylHeight/2); | |
3171 | trayASuppStruct->AddNode(sideASuppCyl, 1, | |
3172 | new TGeoTranslation(0, 0, zloc) ); | |
3173 | trayASuppStruct->AddNode(sideASuppCyl, 2, | |
3174 | new TGeoCombiTrans( 0, 0, zloc, | |
3175 | new TGeoRotation("",180,0,0))); | |
3176 | trayASuppStruct->AddNode(sideASuppSpacer, 1, | |
3177 | new TGeoCombiTrans( xloc, yloc, zloc, | |
3178 | new TGeoRotation("",90+kSuppSpacerAngle,0,0))); | |
3179 | trayASuppStruct->AddNode(sideASuppSpacer, 2, | |
3180 | new TGeoCombiTrans(-xloc, yloc, zloc, | |
3181 | new TGeoRotation("",0,180,kSuppSpacerAngle-90))); | |
3182 | trayASuppStruct->AddNode(sideASuppSpacer, 3, | |
3183 | new TGeoCombiTrans( xloc,-yloc, zloc, | |
3184 | new TGeoRotation("",180,180,kSuppSpacerAngle-90))); | |
3185 | trayASuppStruct->AddNode(sideASuppSpacer, 4, | |
3186 | new TGeoCombiTrans(-xloc,-yloc, zloc, | |
3187 | new TGeoRotation("",270+kSuppSpacerAngle,0,0))); | |
3188 | ||
3189 | ||
3190 | zloc += kSuppCylHeight/2; | |
3191 | trayASuppStruct->AddNode(sideAIntSuppRing, 3, | |
3192 | new TGeoTranslation(0, 0, zloc) ); | |
3193 | trayASuppStruct->AddNode(sideAIntSuppRing, 4, | |
3194 | new TGeoCombiTrans( 0, 0, zloc, | |
3195 | new TGeoRotation("",180,0,0))); | |
3196 | ||
3197 | zloc += kIntSuppRingThick; | |
3198 | trayASuppStruct->AddNode(sideAExtSuppRing, 3, | |
3199 | new TGeoTranslation(0, 0, zloc) ); | |
3200 | trayASuppStruct->AddNode(sideAExtSuppRing, 4, | |
3201 | new TGeoCombiTrans( 0, 0, zloc, | |
3202 | new TGeoRotation("",180,0,0))); | |
3203 | ||
3204 | zloc += kExtSuppRingThick; | |
3205 | trayASuppStruct->AddNode(sideASuppForwRing, 1, | |
3206 | new TGeoTranslation(0, 0, zloc) ); | |
3207 | trayASuppStruct->AddNode(sideASuppForwRing, 2, | |
3208 | new TGeoCombiTrans( 0, 0, zloc, | |
3209 | new TGeoRotation("",180,0,0))); | |
3210 | ||
3211 | zloc += kSuppForwRingThikAll; | |
3212 | trayASuppStruct->AddNode(sideASuppForwCone, 1, | |
3213 | new TGeoTranslation(0, 0, zloc) ); | |
3214 | trayASuppStruct->AddNode(sideASuppForwCone, 2, | |
3215 | new TGeoCombiTrans( 0, 0, zloc, | |
3216 | new TGeoRotation("",180,0,0))); | |
3217 | ||
3218 | zloc += (kSuppForwConeLen1+kSuppForwConeLen2); | |
3219 | trayASuppStruct->AddNode(sideAFirstSuppBackRing, 1, | |
3220 | new TGeoTranslation(0, 0, zloc) ); | |
3221 | trayASuppStruct->AddNode(sideAFirstSuppBackRing, 2, | |
3222 | new TGeoCombiTrans( 0, 0, zloc, | |
3223 | new TGeoRotation("",180,0,0))); | |
3224 | ||
3225 | zloc += kSuppBackRingThick1; | |
3226 | trayASuppStruct->AddNode(sideASecondSuppBackRing, 1, | |
3227 | new TGeoTranslation(0, 0, zloc) ); | |
3228 | trayASuppStruct->AddNode(sideASecondSuppBackRing, 2, | |
3229 | new TGeoCombiTrans( 0, 0, zloc, | |
3230 | new TGeoRotation("",180,0,0))); | |
3231 | ||
3232 | xloc = kSuppRearRingXRodHole; | |
3233 | yloc = kSuppRearRingBaseHi + kSuppRearRingYRodHole; | |
3234 | zloc = kRearSuppZTransGlob - kBackRodZTrans + suppRod->GetDz(); | |
3235 | trayASuppStruct->AddNode(sideASuppRod, 1, | |
3236 | new TGeoTranslation( xloc, yloc, zloc) ); | |
3237 | trayASuppStruct->AddNode(sideASuppRod, 2, | |
3238 | new TGeoTranslation(-xloc, yloc, zloc) ); | |
3239 | trayASuppStruct->AddNode(sideASuppRod, 3, | |
3240 | new TGeoTranslation( xloc,-yloc, zloc) ); | |
3241 | trayASuppStruct->AddNode(sideASuppRod, 4, | |
3242 | new TGeoTranslation(-xloc,-yloc, zloc) ); | |
3243 | ||
3244 | zloc += suppRod->GetDz(); | |
3245 | trayASuppStruct->AddNode(sideASuppRearRing, 1, | |
3246 | new TGeoTranslation( 0, 0, zloc) ); | |
3247 | trayASuppStruct->AddNode(sideASuppRearRing, 2, | |
3248 | new TGeoCombiTrans( 0, 0, zloc, | |
3249 | new TGeoRotation("",180,0,0))); | |
3250 | ||
3251 | ||
3252 | // Finally put everything in the mother volume | |
3253 | moth->AddNode(trayASuppStruct,1,0); | |
3254 | ||
3255 | return; | |
3256 | } | |
3257 | ||
3258 | //______________________________________________________________________ | |
3259 | void AliITSv11GeometrySupport::ServicesCableSupportSPD(TGeoVolume *moth, | |
3260 | TGeoManager *mgr){ | |
3261 | // | |
3262 | // Creates the all SPD cable trays which are outside the ITS support cones | |
3263 | // but still inside the TPC | |
3264 | // In order to avoid a huge monolithic routine, this method actually | |
3265 | // calls inner methods to create and assemble the various (macro)pieces | |
3266 | // | |
3267 | // Input: | |
3268 | // moth : the TGeoVolume owing the volume structure | |
3269 | // mgr : the GeoManager (default gGeoManager) | |
3270 | // Output: | |
3271 | // | |
3272 | // Created: ??? Bjorn S. Nilsen | |
3273 | // Updated: 15 Nov 2009 Mario Sitta | |
3274 | // | |
3275 | // Technical data are taken from AutoCAD drawings and other (oral) | |
3276 | // information given by F.Tosello | |
3277 | // | |
3278 | ||
3279 | SPDCableTraysSideA(moth, mgr); | |
aa177c73 | 3280 | SPDCableTraysSideC(moth, mgr); |
798b4e0c | 3281 | |
3282 | } | |
3283 | ||
3284 | //______________________________________________________________________ | |
3285 | void AliITSv11GeometrySupport::ServicesCableSupportSDD(TGeoVolume *moth, | |
3286 | TGeoManager *mgr){ | |
3287 | // | |
3288 | // Creates the all SDD cable trays which are outside the ITS support cones | |
3289 | // but still inside the TPC | |
3290 | // In order to avoid a huge monolithic routine, this method actually | |
3291 | // calls inner methods to create and assemble the various (macro)pieces | |
3292 | // | |
3293 | // Input: | |
3294 | // moth : the TGeoVolume owing the volume structure | |
3295 | // mgr : the GeoManager (default gGeoManager) | |
3296 | // Output: | |
3297 | // | |
3298 | // Created: 14 Dec 2009 Mario Sitta | |
3299 | // | |
3300 | ||
3301 | SDDCableTraysSideA(moth, mgr); | |
aa177c73 | 3302 | SDDCableTraysSideC(moth, mgr); |
798b4e0c | 3303 | |
3304 | return; | |
3305 | } | |
3306 | ||
3307 | //______________________________________________________________________ | |
3308 | void AliITSv11GeometrySupport::ServicesCableSupportSSD(TGeoVolume *moth, | |
3309 | TGeoManager *mgr){ | |
3310 | // | |
3311 | // Creates the SSD cable trays which are outside the ITS support cones | |
3312 | // but still inside the TPC | |
3313 | // In order to avoid a huge monolithic routine, this method actually | |
3314 | // calls inner methods to create and assemble the various (macro)pieces | |
3315 | // | |
3316 | // Input: | |
3317 | // moth : the TGeoVolume owing the volume structure | |
3318 | // mgr : the GeoManager (default gGeoManager) | |
3319 | // Output: | |
3320 | // | |
3321 | // Created: 15 Nov 2009 Mario Sitta | |
3322 | // | |
3323 | ||
3324 | SSDCableTraysSideA(moth, mgr); | |
aa177c73 | 3325 | SSDCableTraysSideC(moth, mgr); |
798b4e0c | 3326 | |
3327 | return; | |
3328 | } | |
3329 | ||
3330 | //______________________________________________________________________ | |
3331 | void AliITSv11GeometrySupport::SPDCableTraysSideA(TGeoVolume *moth, | |
43aefea7 | 3332 | const TGeoManager *mgr){ |
798b4e0c | 3333 | // |
3334 | // Creates the SPD cable trays which are outside the ITS support cones | |
3335 | // but still inside the TPC on Side A | |
3336 | // (part of this code is taken or anyway inspired to ServicesCableSupport | |
3337 | // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
3338 | // | |
3339 | // Input: | |
3340 | // moth : the TGeoVolume owing the volume structure | |
3341 | // mgr : the GeoManager (default gGeoManager) | |
3342 | // Output: | |
3343 | // | |
3344 | // Created: 15 Feb 2010 Mario Sitta | |
96eb8210 | 3345 | // Updated: 10 Jun 2010 Mario Sitta Freon inside cooling pipes |
57126ea1 | 3346 | // Updated: 08 Sep 2010 Mario Sitta |
1c5895a3 | 3347 | // Updated: 14 Sep 2010 Mario Sitta Cables prolonged till cone |
798b4e0c | 3348 | // |
3349 | // Technical data are taken from AutoCAD drawings, L.Simonetti technical | |
3350 | // drawings and other (oral) information given by F.Tosello and D.Elia | |
3351 | // (small differences with blueprints - e.g. -0.07mm in R1Trans and | |
3352 | // R2Trans - fix small overlaps; they are then compensated in positioning | |
3353 | // the Rear Tray to avoid its own overlaps with the rear supporting ring) | |
57126ea1 | 3354 | // Optical fibers and voltage cables are approximated with mean materials |
3355 | // and square cross sections, but preserving the total material budget. | |
798b4e0c | 3356 | // |
3357 | ||
3358 | // Overall position and rotation of the A-Side Cable Trays | |
3359 | // (parts of 0872/G/D) | |
3360 | const Double_t kTrayAR1Trans = 396.93 *fgkmm; | |
3361 | const Double_t kTrayAR2Trans = 413.93 *fgkmm; | |
3362 | const Double_t kTrayAZTrans = 1011.00 *fgkmm; | |
3363 | const Double_t kTrayAZRot = (180-169.5);// Degrees | |
3364 | const Double_t kTrayAFirstRotAng = 22.00; // Degrees | |
3365 | const Double_t kTrayASecondRotAng = 15.00; // Degrees | |
3366 | ||
3367 | const Double_t kForwardTrayWide = 94.00 *fgkmm;//!!!TO BE CHECKED!!! | |
3368 | const Double_t kForwardTrayFirstHigh = 83.00 *fgkmm;//!!!TO BE CHECKED!!! | |
3369 | const Double_t kForwardTraySecondHigh = 52.70 *fgkmm;//!!!TO BE CHECKED!!! | |
3370 | const Double_t kForwardTrayTotalLen = 853.00 *fgkmm; | |
3371 | const Double_t kForwardTrayFirstLen = 435.00 *fgkmm; | |
3372 | const Double_t kForwardTrayWingWide = 16.00 *fgkmm;//!!!TO BE CHECKED!!! | |
3373 | const Double_t kForwardTrayInterSpace = 18.00 *fgkmm;//!!!TO BE CHECKED!!! | |
3374 | const Double_t kForwardTrayThick = 2.00 *fgkmm; | |
3375 | ||
1c5895a3 | 3376 | const Int_t kForwardSideNpoints = 6; |
798b4e0c | 3377 | |
3378 | const Double_t kExternalTrayLen = 1200.00 *fgkmm; | |
3379 | const Double_t kExternalTrayWide = kForwardTrayWide; | |
3380 | const Double_t kExternalTrayHigh = kForwardTraySecondHigh; | |
3381 | const Double_t kExternalTrayThick = kForwardTrayThick; | |
3382 | ||
57126ea1 | 3383 | const Double_t kCoolingTubeRmin = 2.00 *fgkmm; |
3384 | const Double_t kCoolingTubeRmax = 3.00 *fgkmm; | |
798b4e0c | 3385 | |
3386 | const Double_t kOpticalFibersSect = 8.696*fgkmm;//!!!ESTIMATED!!! | |
57126ea1 | 3387 | const Double_t kLowVoltageCableSectCu = 7.675*fgkmm;// Computed |
3388 | const Double_t kLowVoltageCableHighPUR = 1.000*fgkmm;// Computed | |
3389 | const Double_t kHiVoltageCableSectCu = 1.535*fgkmm;// Computed | |
3390 | const Double_t kHiVoltageCableHighPUR = 0.500*fgkmm;// Computed | |
d8826f33 | 3391 | const Double_t kCoaxCableSectCu = 6.024*fgkmm;// Computed |
3392 | const Double_t kCoaxCableHighMeg = 5.695*fgkmm;// Computed | |
96eb8210 | 3393 | |
1c5895a3 | 3394 | const Double_t kTrayCCablesRot = 75.000*fgkDegree;// Computed |
3395 | const Double_t kTrayCCablesZLenOut = 227.000*fgkmm;// Computed | |
3396 | ||
798b4e0c | 3397 | |
3398 | // Local variables | |
3399 | Double_t xprof[kForwardSideNpoints], yprof[kForwardSideNpoints]; | |
3400 | Double_t xloc, yloc, zloc, alpharot; | |
3401 | ||
3402 | ||
3403 | // The two tray components as assemblies | |
3404 | TGeoVolumeAssembly *cableTrayAForw = | |
3405 | new TGeoVolumeAssembly("ITSsupportSPDTrayAForwRear"); | |
3406 | TGeoVolumeAssembly *cableTrayAExt = | |
3407 | new TGeoVolumeAssembly("ITSsupportSPDTrayAExt"); | |
3408 | ||
3409 | ||
3410 | // First create all needed shapes | |
3411 | ||
3412 | // The lower face of the forward tray: a BBox | |
3413 | TGeoBBox *forwTrayLowerFace = new TGeoBBox(kForwardTrayWide/2, | |
3414 | kForwardTrayThick/2, | |
3415 | kForwardTrayTotalLen/2); | |
3416 | ||
3417 | // The side face of the forward tray: a Xtru | |
3418 | TGeoXtru *forwTraySideFace = new TGeoXtru(2); | |
3419 | forwTraySideFace->SetName("ITSsuppSPDForwTraySide"); | |
3420 | ||
3421 | xprof[0] = 0; | |
3422 | yprof[0] = kForwardTrayThick; | |
3423 | xprof[1] = kForwardTrayTotalLen; | |
3424 | yprof[1] = yprof[0]; | |
3425 | xprof[2] = xprof[1]; | |
3426 | yprof[2] = kForwardTraySecondHigh - kForwardTrayThick; | |
3427 | xprof[3] = kForwardTrayFirstLen; | |
3428 | yprof[3] = yprof[2]; | |
3429 | xprof[4] = xprof[3]; | |
3430 | yprof[4] = kForwardTrayFirstHigh - kForwardTrayThick; | |
3431 | xprof[5] = xprof[0]; | |
3432 | yprof[5] = yprof[4]; | |
3433 | ||
3434 | forwTraySideFace->DefinePolygon(6, xprof, yprof); | |
3435 | forwTraySideFace->DefineSection(0, 0); | |
3436 | forwTraySideFace->DefineSection(1, kForwardTrayThick); | |
3437 | ||
3438 | // The covers of the forward tray: two BBox's | |
3439 | TGeoBBox *forwTrayShortCover = new TGeoBBox(kForwardTrayWide/2, | |
3440 | kForwardTrayThick/2, | |
3441 | kForwardTrayFirstLen/2); | |
3442 | ||
3443 | TGeoBBox *forwTrayLongCover = new TGeoBBox(kForwardTrayWide/2, | |
3444 | kForwardTrayThick/2, | |
3445 | (kForwardTrayTotalLen - kForwardTrayFirstLen)/2); | |
3446 | ||
3447 | // Each small wing of the forward tray: a BBox | |
3448 | TGeoBBox *forwTrayWing = new TGeoBBox(kForwardTrayWingWide/2, | |
3449 | (kForwardTrayFirstHigh-kForwardTraySecondHigh)/2, | |
3450 | kForwardTrayThick/2); | |
3451 | ||
3452 | // The internal plane of the forward tray: a BBox | |
3453 | TGeoBBox *forwTrayPlane = new TGeoBBox(kForwardTrayWide/2-kForwardTrayThick, | |
3454 | kForwardTrayThick/2, | |
3455 | kForwardTrayTotalLen/2); | |
3456 | ||
3457 | // The internal wall of the forward tray: a BBox | |
3458 | TGeoBBox *forwTrayWall = new TGeoBBox(kForwardTrayThick/2, | |
3459 | (kForwardTrayInterSpace-kForwardTrayThick)/2, | |
3460 | kForwardTrayTotalLen/2); | |
3461 | ||
3462 | // Each horizontal face of the external tray: a BBox | |
3463 | TGeoBBox *extTrayHorFace = new TGeoBBox(kExternalTrayWide/2-kExternalTrayThick, | |
3464 | kExternalTrayThick/2, | |
3465 | kExternalTrayLen/2); | |
3466 | ||
3467 | // Each vertical face of the external tray: a BBox | |
3468 | TGeoBBox *extTrayVerFace = new TGeoBBox(kExternalTrayThick/2, | |
3469 | kExternalTrayHigh/2, | |
3470 | kExternalTrayLen/2); | |
3471 | ||
3472 | // The internal wall of the external tray: a BBox | |
3473 | TGeoBBox *extTrayWall = new TGeoBBox(kExternalTrayThick/2, | |
3474 | (kForwardTrayInterSpace-kExternalTrayThick)/2, | |
3475 | kExternalTrayLen/2); | |
3476 | ||
96eb8210 | 3477 | // The cooling tube inside the forward tray: a Tube |
798b4e0c | 3478 | Double_t zelong = (kForwardTraySecondHigh - 2*kForwardTrayThick |
3479 | - 2*forwTrayWall->GetDY() - kCoolingTubeRmax)*SinD(kTrayAZRot); | |
3480 | Double_t zlen = (zelong + kForwardTrayTotalLen)/2; | |
96eb8210 | 3481 | TGeoTube *coolTubeForw = new TGeoTube(0, kCoolingTubeRmax, zlen); |
3482 | ||
3483 | // The freon inside the forward tray tubes: a Tube | |
3484 | TGeoTube *freonTubeForw = new TGeoTube(0, kCoolingTubeRmin, zlen); | |
798b4e0c | 3485 | |
3486 | // The cooling tube inside the external tray: a Ctub | |
96eb8210 | 3487 | TGeoCtub *coolTubeExt = new TGeoCtub(0, kCoolingTubeRmax, |
798b4e0c | 3488 | kExternalTrayLen/2, 0, 360, |
3489 | 0, SinD(kTrayAZRot),-CosD(kTrayAZRot), | |
3490 | 0, 0, 1); | |
3491 | ||
96eb8210 | 3492 | // The freon inside the forward tray tubes: a Tube |
3493 | TGeoCtub *freonTubeExt = new TGeoCtub(0, kCoolingTubeRmin, | |
3494 | kExternalTrayLen/2, 0, 360, | |
3495 | 0, SinD(kTrayAZRot),-CosD(kTrayAZRot), | |
3496 | 0, 0, 1); | |
3497 | ||
1c5895a3 | 3498 | // The optical fibers inside the forward tray: a Xtru |
3499 | TGeoXtru *optFibsForw = new TGeoXtru(2); | |
3500 | ||
3501 | xprof[0] = -kTrayCCablesZLenOut; | |
3502 | yprof[0] = xprof[0]/TanD(kTrayCCablesRot); | |
3503 | xprof[1] = 0; | |
3504 | yprof[1] = 0; | |
3505 | xprof[2] = kForwardTrayTotalLen; | |
3506 | yprof[2] = yprof[1]; | |
3507 | xprof[3] = xprof[2]; | |
3508 | yprof[3] = yprof[2] + kOpticalFibersSect; | |
3509 | xprof[4] = xprof[1]; | |
3510 | yprof[4] = yprof[3]; | |
3511 | xprof[5] = xprof[0]; | |
3512 | yprof[5] = yprof[0] + kOpticalFibersSect; | |
3513 | ||
3514 | optFibsForw->DefinePolygon(6, xprof, yprof); | |
3515 | optFibsForw->DefineSection(0,-kOpticalFibersSect/2); | |
3516 | optFibsForw->DefineSection(1, kOpticalFibersSect/2); | |
798b4e0c | 3517 | |
3518 | // The optical fibers inside the external tray: a Xtru | |
3519 | TGeoXtru *optFibsExt = new TGeoXtru(2); | |
1c5895a3 | 3520 | optFibsExt->SetName("ITSsuppSPDExtTrayOptFibs"); |
798b4e0c | 3521 | |
3522 | yprof[0] = -kExternalTrayHigh + 2*kExternalTrayThick | |
3523 | + 2*forwTrayWall->GetDY(); | |
3524 | xprof[0] = yprof[0]*TanD(kTrayAZRot); | |
3525 | xprof[1] = kExternalTrayLen; | |
3526 | yprof[1] = yprof[0]; | |
3527 | xprof[2] = xprof[1]; | |
3528 | yprof[2] = yprof[1] + kOpticalFibersSect; | |
3529 | yprof[3] = yprof[2]; | |
3530 | xprof[3] = yprof[2]*TanD(kTrayAZRot); | |
3531 | ||
3532 | optFibsExt->DefinePolygon(4, xprof, yprof); | |
3533 | optFibsExt->DefineSection(0, 0); | |
3534 | optFibsExt->DefineSection(1, kOpticalFibersSect); | |
3535 | ||
1c5895a3 | 3536 | // The Low Voltage cables inside the forward tray: two Xtru |
3537 | TGeoXtru *lowCablesForwCu = new TGeoXtru(2); | |
3538 | ||
3539 | xprof[0] = -kTrayCCablesZLenOut; | |
3540 | yprof[0] = xprof[0]/TanD(kTrayCCablesRot); | |
3541 | xprof[1] = 0; | |
3542 | yprof[1] = 0; | |
3543 | xprof[2] = kForwardTrayTotalLen; | |
3544 | yprof[2] = yprof[1]; | |
3545 | xprof[3] = xprof[2]; | |
3546 | yprof[3] = yprof[2] + kLowVoltageCableSectCu/2; | |
3547 | xprof[4] = xprof[1]; | |
3548 | yprof[4] = yprof[3]; | |
3549 | xprof[5] = xprof[0]; | |
3550 | yprof[5] = yprof[0] + kLowVoltageCableSectCu/2; | |
3551 | ||
3552 | lowCablesForwCu->DefinePolygon(6, xprof, yprof); | |
3553 | lowCablesForwCu->DefineSection(0,-kLowVoltageCableSectCu); | |
3554 | lowCablesForwCu->DefineSection(1, kLowVoltageCableSectCu); | |
57126ea1 | 3555 | |
1c5895a3 | 3556 | TGeoXtru *lowCablesForwPUR = new TGeoXtru(2); |
3557 | ||
3558 | xprof[0] = lowCablesForwCu->GetX(5); | |
3559 | yprof[0] = lowCablesForwCu->GetY(5); | |
3560 | xprof[1] = lowCablesForwCu->GetX(4); | |
3561 | yprof[1] = lowCablesForwCu->GetY(4); | |
3562 | xprof[2] = lowCablesForwCu->GetX(3); | |
3563 | yprof[2] = lowCablesForwCu->GetY(3); | |
3564 | xprof[3] = xprof[2]; | |
3565 | yprof[3] = yprof[2] + kLowVoltageCableHighPUR/2; | |
3566 | xprof[4] = xprof[1]; | |
3567 | yprof[4] = yprof[3]; | |
3568 | xprof[5] = xprof[0]; | |
3569 | yprof[5] = yprof[0] + kLowVoltageCableHighPUR/2; | |
3570 | ||
3571 | lowCablesForwPUR->DefinePolygon(6, xprof, yprof); | |
3572 | lowCablesForwPUR->DefineSection(0,-kLowVoltageCableSectCu); | |
3573 | lowCablesForwPUR->DefineSection(1, kLowVoltageCableSectCu); | |
798b4e0c | 3574 | |
57126ea1 | 3575 | // The Low Voltage inside the external tray: two Xtru |
3576 | TGeoXtru *lowCablesExtCu = new TGeoXtru(2); | |
3577 | lowCablesExtCu->SetName("ITSsuppSPDExtTrayLowVoltageCu"); | |
798b4e0c | 3578 | |
3579 | yprof[0] = -kExternalTrayHigh + 2*kExternalTrayThick | |
3580 | + 2*forwTrayWall->GetDY(); | |
3581 | xprof[0] = yprof[0]*TanD(kTrayAZRot); | |
3582 | xprof[1] = kExternalTrayLen; | |
3583 | yprof[1] = yprof[0]; | |
3584 | xprof[2] = xprof[1]; | |
57126ea1 | 3585 | yprof[2] = yprof[1] + kLowVoltageCableSectCu/2; |
798b4e0c | 3586 | yprof[3] = yprof[2]; |
3587 | xprof[3] = yprof[2]*TanD(kTrayAZRot); | |
3588 | ||
57126ea1 | 3589 | lowCablesExtCu->DefinePolygon(4, xprof, yprof); |
3590 | lowCablesExtCu->DefineSection(0, 0); | |
3591 | lowCablesExtCu->DefineSection(1, kLowVoltageCableSectCu*2); | |
798b4e0c | 3592 | |
57126ea1 | 3593 | TGeoXtru *lowCablesExtPUR = new TGeoXtru(2); |
3594 | lowCablesExtPUR->SetName("ITSsuppSPDExtTrayLowVoltagePUR"); | |
3595 | ||
3596 | xprof[0] = lowCablesExtCu->GetX(3); | |
3597 | yprof[0] = lowCablesExtCu->GetY(3); | |
3598 | xprof[1] = lowCablesExtCu->GetX(2); | |
3599 | yprof[1] = lowCablesExtCu->GetY(2); | |
3600 | xprof[2] = xprof[1]; | |
3601 | yprof[2] = yprof[1] + kLowVoltageCableHighPUR/2; | |
3602 | yprof[3] = yprof[2]; | |
3603 | xprof[3] = yprof[2]*TanD(kTrayAZRot); | |
3604 | ||
3605 | lowCablesExtPUR->DefinePolygon(4, xprof, yprof); | |
3606 | lowCablesExtPUR->DefineSection(0, 0); | |
3607 | lowCablesExtPUR->DefineSection(1, kLowVoltageCableSectCu*2); | |
3608 | ||
1c5895a3 | 3609 | // The High Voltage cables inside the forward tray: two Xtru |
3610 | TGeoXtru *hiCablesForwCu = new TGeoXtru(2); | |
96eb8210 | 3611 | |
1c5895a3 | 3612 | xprof[0] = -kTrayCCablesZLenOut; |
3613 | yprof[0] = xprof[0]/TanD(kTrayCCablesRot); | |
3614 | xprof[1] = 0; | |
3615 | yprof[1] = 0; | |
3616 | xprof[2] = kForwardTrayTotalLen; | |
3617 | yprof[2] = yprof[1]; | |
3618 | xprof[3] = xprof[2]; | |
3619 | yprof[3] = yprof[2] + kHiVoltageCableSectCu/2; | |
3620 | xprof[4] = xprof[1]; | |
3621 | yprof[4] = yprof[3]; | |
3622 | xprof[5] = xprof[0]; | |
3623 | yprof[5] = yprof[0] + kHiVoltageCableSectCu/2; | |
3624 | ||
3625 | hiCablesForwCu->DefinePolygon(6, xprof, yprof); | |
3626 | hiCablesForwCu->DefineSection(0,-kHiVoltageCableSectCu); | |
3627 | hiCablesForwCu->DefineSection(1, kHiVoltageCableSectCu); | |
3628 | ||
3629 | TGeoXtru *hiCablesForwPUR = new TGeoXtru(2); | |
3630 | ||
3631 | xprof[0] = hiCablesForwCu->GetX(5); | |
3632 | yprof[0] = hiCablesForwCu->GetY(5); | |
3633 | xprof[1] = hiCablesForwCu->GetX(4); | |
3634 | yprof[1] = hiCablesForwCu->GetY(4); | |
3635 | xprof[2] = hiCablesForwCu->GetX(3); | |
3636 | yprof[2] = hiCablesForwCu->GetY(3); | |
3637 | xprof[3] = xprof[2]; | |
3638 | yprof[3] = yprof[2] + kHiVoltageCableHighPUR/2; | |
3639 | xprof[4] = xprof[1]; | |
3640 | yprof[4] = yprof[3]; | |
3641 | xprof[5] = xprof[0]; | |
3642 | yprof[5] = yprof[0] + kHiVoltageCableHighPUR/2; | |
3643 | ||
3644 | hiCablesForwPUR->DefinePolygon(6, xprof, yprof); | |
3645 | hiCablesForwPUR->DefineSection(0,-kHiVoltageCableSectCu); | |
3646 | hiCablesForwPUR->DefineSection(1, kHiVoltageCableSectCu); | |
57126ea1 | 3647 | |
3648 | // The High Voltage inside the external tray: two Xtru | |
3649 | TGeoXtru *hiCablesExtCu = new TGeoXtru(2); | |
3650 | hiCablesExtCu->SetName("ITSsuppSPDExtTrayHiVoltageCu"); | |
96eb8210 | 3651 | |
3652 | yprof[0] = -kExternalTrayHigh + 2*kExternalTrayThick | |
3653 | + 2*forwTrayWall->GetDY(); | |
3654 | xprof[0] = yprof[0]*TanD(kTrayAZRot); | |
3655 | xprof[1] = kExternalTrayLen; | |
3656 | yprof[1] = yprof[0]; | |
3657 | xprof[2] = xprof[1]; | |
57126ea1 | 3658 | yprof[2] = yprof[1] + kHiVoltageCableSectCu/2; |
3659 | yprof[3] = yprof[2]; | |
3660 | xprof[3] = yprof[2]*TanD(kTrayAZRot); | |
3661 | ||
3662 | hiCablesExtCu->DefinePolygon(4, xprof, yprof); | |
3663 | hiCablesExtCu->DefineSection(0, 0); | |
3664 | hiCablesExtCu->DefineSection(1, kHiVoltageCableSectCu*2); | |
3665 | ||
3666 | TGeoXtru *hiCablesExtPUR = new TGeoXtru(2); | |
3667 | hiCablesExtPUR->SetName("ITSsuppSPDExtTrayHiVoltagePUR"); | |
3668 | ||
3669 | xprof[0] = hiCablesExtCu->GetX(3); | |
3670 | yprof[0] = hiCablesExtCu->GetY(3); | |
3671 | xprof[1] = hiCablesExtCu->GetX(2); | |
3672 | yprof[1] = hiCablesExtCu->GetY(2); | |
3673 | xprof[2] = xprof[1]; | |
3674 | yprof[2] = yprof[1] + kHiVoltageCableHighPUR/2; | |
3675 | yprof[3] = yprof[2]; | |
3676 | xprof[3] = yprof[2]*TanD(kTrayAZRot); | |
3677 | ||
3678 | hiCablesExtPUR->DefinePolygon(4, xprof, yprof); | |
3679 | hiCablesExtPUR->DefineSection(0, 0); | |
3680 | hiCablesExtPUR->DefineSection(1, kHiVoltageCableSectCu*2); | |
3681 | ||
1c5895a3 | 3682 | // The Coaxial cables inside the forward tray: two Xtru |
3683 | TGeoXtru *coaxCablesForwCu = new TGeoXtru(2); | |
d8826f33 | 3684 | coaxCablesForwCu->SetName("ITSsuppSPDForwTrayCoaxCu"); |
57126ea1 | 3685 | |
1c5895a3 | 3686 | xprof[0] = -kTrayCCablesZLenOut; |
3687 | yprof[0] = xprof[0]/TanD(kTrayCCablesRot); | |
3688 | xprof[1] = 0; | |
3689 | yprof[1] = 0; | |
3690 | xprof[2] = kForwardTrayTotalLen; | |
3691 | yprof[2] = yprof[1]; | |
3692 | xprof[3] = xprof[2]; | |
3693 | yprof[3] = yprof[2] + kCoaxCableSectCu/2; | |
3694 | xprof[4] = xprof[1]; | |
3695 | yprof[4] = yprof[3]; | |
3696 | xprof[5] = xprof[0]; | |
3697 | yprof[5] = yprof[0] + kCoaxCableSectCu/2; | |
3698 | ||
3699 | coaxCablesForwCu->DefinePolygon(6, xprof, yprof); | |
3700 | coaxCablesForwCu->DefineSection(0,-kCoaxCableSectCu); | |
3701 | coaxCablesForwCu->DefineSection(1, kCoaxCableSectCu); | |
3702 | ||
d8826f33 | 3703 | TGeoXtru *coaxCablesForwMeg = new TGeoXtru(2); |
3704 | coaxCablesForwMeg->SetName("ITSsuppSPDForwTrayCoaxMeg"); | |
1c5895a3 | 3705 | |
3706 | xprof[0] = coaxCablesForwCu->GetX(5); | |
3707 | yprof[0] = coaxCablesForwCu->GetY(5); | |
3708 | xprof[1] = coaxCablesForwCu->GetX(4); | |
3709 | yprof[1] = coaxCablesForwCu->GetY(4); | |
3710 | xprof[2] = coaxCablesForwCu->GetX(3); | |
3711 | yprof[2] = coaxCablesForwCu->GetY(3); | |
3712 | xprof[3] = xprof[2]; | |
d8826f33 | 3713 | yprof[3] = yprof[2] + kCoaxCableHighMeg/2; |
1c5895a3 | 3714 | xprof[4] = xprof[1]; |
3715 | yprof[4] = yprof[3]; | |
3716 | xprof[5] = xprof[0]; | |
d8826f33 | 3717 | yprof[5] = yprof[0] + kCoaxCableHighMeg/2; |
1c5895a3 | 3718 | |
d8826f33 | 3719 | coaxCablesForwMeg->DefinePolygon(6, xprof, yprof); |
3720 | coaxCablesForwMeg->DefineSection(0,-kCoaxCableSectCu); | |
3721 | coaxCablesForwMeg->DefineSection(1, kCoaxCableSectCu); | |
57126ea1 | 3722 | |
3723 | // The Coaxial inside the external tray: two Xtru | |
3724 | TGeoXtru *coaxCablesExtCu = new TGeoXtru(2); | |
3725 | coaxCablesExtCu->SetName("ITSsuppSPDExtTrayCoaxCu"); | |
3726 | ||
3727 | yprof[0] = -kExternalTrayHigh + 2*kExternalTrayThick | |
3728 | + 2*forwTrayWall->GetDY(); | |
3729 | xprof[0] = yprof[0]*TanD(kTrayAZRot); | |
3730 | xprof[1] = kExternalTrayLen; | |
3731 | yprof[1] = yprof[0]; | |
3732 | xprof[2] = xprof[1]; | |
3733 | yprof[2] = yprof[1] + kCoaxCableSectCu/2; | |
3734 | yprof[3] = yprof[2]; | |
3735 | xprof[3] = yprof[2]*TanD(kTrayAZRot); | |
3736 | ||
3737 | coaxCablesExtCu->DefinePolygon(4, xprof, yprof); | |
3738 | coaxCablesExtCu->DefineSection(0, 0); | |
3739 | coaxCablesExtCu->DefineSection(1, kCoaxCableSectCu*2); | |
3740 | ||
d8826f33 | 3741 | TGeoXtru *coaxCablesExtMeg = new TGeoXtru(2); |
3742 | coaxCablesExtMeg->SetName("ITSsuppSPDExtTrayCoaxMeg"); | |
57126ea1 | 3743 | |
3744 | xprof[0] = coaxCablesExtCu->GetX(3); | |
3745 | yprof[0] = coaxCablesExtCu->GetY(3); | |
3746 | xprof[1] = coaxCablesExtCu->GetX(2); | |
3747 | yprof[1] = coaxCablesExtCu->GetY(2); | |
3748 | xprof[2] = xprof[1]; | |
d8826f33 | 3749 | yprof[2] = yprof[1] + kCoaxCableHighMeg/2; |
96eb8210 | 3750 | yprof[3] = yprof[2]; |
3751 | xprof[3] = yprof[2]*TanD(kTrayAZRot); | |
3752 | ||
d8826f33 | 3753 | coaxCablesExtMeg->DefinePolygon(4, xprof, yprof); |
3754 | coaxCablesExtMeg->DefineSection(0, 0); | |
3755 | coaxCablesExtMeg->DefineSection(1, kCoaxCableSectCu*2); | |
96eb8210 | 3756 | |
798b4e0c | 3757 | |
3758 | // We have all shapes: now create the real volumes | |
96eb8210 | 3759 | TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$"); |
3760 | TGeoMedium *medIn = mgr->GetMedium("ITS_INOX$"); | |
3761 | TGeoMedium *medFreon = mgr->GetMedium("ITS_GASEOUS FREON$"); | |
3762 | TGeoMedium *medFibs = mgr->GetMedium("ITS_SDD OPTICFIB$");//!TO BE CHECKED! | |
57126ea1 | 3763 | TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$"); |
3764 | TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$"); | |
d8826f33 | 3765 | TGeoMedium *medMeg = mgr->GetMedium("ITS_MEGOLON$"); |
798b4e0c | 3766 | |
3767 | TGeoVolume *forwTrayABase = new TGeoVolume("ITSsuppSPDSideAForwTrayABase", | |
3768 | forwTrayLowerFace, medAl); | |
3769 | ||
3770 | forwTrayABase->SetVisibility(kTRUE); | |
3771 | forwTrayABase->SetLineColor(6); // Purple | |
3772 | forwTrayABase->SetLineWidth(1); | |
3773 | forwTrayABase->SetFillColor(forwTrayABase->GetLineColor()); | |
3774 | forwTrayABase->SetFillStyle(4000); // 0% transparent | |
3775 | ||
3776 | TGeoVolume *forwTrayASide = new TGeoVolume("ITSsuppSPDSideAForwTrayASide", | |
3777 | forwTraySideFace, medAl); | |
3778 | ||
3779 | forwTrayASide->SetVisibility(kTRUE); | |
3780 | forwTrayASide->SetLineColor(6); // Purple | |
3781 | forwTrayASide->SetLineWidth(1); | |
3782 | forwTrayASide->SetFillColor(forwTrayASide->GetLineColor()); | |
3783 | forwTrayASide->SetFillStyle(4000); // 0% transparent | |
3784 | ||
3785 | TGeoVolume *forwTrayACoverShort = new TGeoVolume("ITSsuppSPDSideAForwTrayASC", | |
3786 | forwTrayShortCover, medAl); | |
3787 | ||
3788 | forwTrayACoverShort->SetVisibility(kTRUE); | |
3789 | forwTrayACoverShort->SetLineColor(6); // Purple | |
3790 | forwTrayACoverShort->SetLineWidth(1); | |
3791 | forwTrayACoverShort->SetFillColor(forwTrayACoverShort->GetLineColor()); | |
3792 | forwTrayACoverShort->SetFillStyle(4000); // 0% transparent | |
3793 | ||
3794 | TGeoVolume *forwTrayACoverLong = new TGeoVolume("ITSsuppSPDSideAForwTrayALC", | |
3795 | forwTrayLongCover, medAl); | |
3796 | ||
3797 | forwTrayACoverLong->SetVisibility(kTRUE); | |
3798 | forwTrayACoverLong->SetLineColor(6); // Purple | |
3799 | forwTrayACoverLong->SetLineWidth(1); | |
3800 | forwTrayACoverLong->SetFillColor(forwTrayACoverLong->GetLineColor()); | |
3801 | forwTrayACoverLong->SetFillStyle(4000); // 0% transparent | |
3802 | ||
3803 | TGeoVolume *forwTrayAWing = new TGeoVolume("ITSsuppSPDSideAForwTrayAWing", | |
3804 | forwTrayWing, medAl); | |
3805 | ||
3806 | forwTrayAWing->SetVisibility(kTRUE); | |
3807 | forwTrayAWing->SetLineColor(6); // Purple | |
3808 | forwTrayAWing->SetLineWidth(1); | |
3809 | forwTrayAWing->SetFillColor(forwTrayAWing->GetLineColor()); | |
3810 | forwTrayAWing->SetFillStyle(4000); // 0% transparent | |
3811 | ||
3812 | TGeoVolume *forwTrayAPlane = new TGeoVolume("ITSsuppSPDSideAForwTrayAPlane", | |
3813 | forwTrayPlane, medAl); | |
3814 | ||
3815 | forwTrayAPlane->SetVisibility(kTRUE); | |
3816 | forwTrayAPlane->SetLineColor(6); // Purple | |
3817 | forwTrayAPlane->SetLineWidth(1); | |
3818 | forwTrayAPlane->SetFillColor(forwTrayAPlane->GetLineColor()); | |
3819 | forwTrayAPlane->SetFillStyle(4000); // 0% transparent | |
3820 | ||
3821 | TGeoVolume *forwTrayAWall = new TGeoVolume("ITSsuppSPDSideAForwTrayAWall", | |
3822 | forwTrayWall, medAl); | |
3823 | ||
3824 | forwTrayAWall->SetVisibility(kTRUE); | |
3825 | forwTrayAWall->SetLineColor(6); // Purple | |
3826 | forwTrayAWall->SetLineWidth(1); | |
3827 | forwTrayAWall->SetFillColor(forwTrayAWall->GetLineColor()); | |
3828 | forwTrayAWall->SetFillStyle(4000); // 0% transparent | |
3829 | ||
3830 | TGeoVolume *extTrayAHorFace = new TGeoVolume("ITSsuppSPDSideAExtTrayHorFace", | |
3831 | extTrayHorFace, medAl); | |
3832 | ||
3833 | extTrayAHorFace->SetVisibility(kTRUE); | |
3834 | extTrayAHorFace->SetLineColor(6); // Purple | |
3835 | extTrayAHorFace->SetLineWidth(1); | |
3836 | extTrayAHorFace->SetFillColor(extTrayAHorFace->GetLineColor()); | |
3837 | extTrayAHorFace->SetFillStyle(4000); // 0% transparent | |
3838 | ||
3839 | TGeoVolume *extTrayAVerFace = new TGeoVolume("ITSsuppSPDSideAExtTrayVerFace", | |
3840 | extTrayVerFace, medAl); | |
3841 | ||
3842 | extTrayAVerFace->SetVisibility(kTRUE); | |
3843 | extTrayAVerFace->SetLineColor(6); // Purple | |
3844 | extTrayAVerFace->SetLineWidth(1); | |
3845 | extTrayAVerFace->SetFillColor(extTrayAVerFace->GetLineColor()); | |
3846 | extTrayAVerFace->SetFillStyle(4000); // 0% transparent | |
3847 | ||
3848 | TGeoVolume *extTrayAWall = new TGeoVolume("ITSsuppSPDSideAExtTrayWall", | |
3849 | extTrayWall, medAl); | |
3850 | ||
3851 | extTrayAWall->SetVisibility(kTRUE); | |
3852 | extTrayAWall->SetLineColor(6); // Purple | |
3853 | extTrayAWall->SetLineWidth(1); | |
3854 | extTrayAWall->SetFillColor(extTrayAWall->GetLineColor()); | |
3855 | extTrayAWall->SetFillStyle(4000); // 0% transparent | |
3856 | ||
3857 | TGeoVolume *forwCoolTube = new TGeoVolume("ITSsuppSPDSideAForwTrayCoolTube", | |
3858 | coolTubeForw, medIn); | |
3859 | ||
3860 | forwCoolTube->SetVisibility(kTRUE); | |
3861 | forwCoolTube->SetLineColor(kGray); // as in GeometrySPD | |
3862 | forwCoolTube->SetLineWidth(1); | |
3863 | forwCoolTube->SetFillColor(forwCoolTube->GetLineColor()); | |
3864 | forwCoolTube->SetFillStyle(4000); // 0% transparent | |
3865 | ||
96eb8210 | 3866 | TGeoVolume *forwCoolFreon = new TGeoVolume("ITSsuppSPDSideAForwTrayFreon", |
3867 | freonTubeForw, medFreon); | |
3868 | ||
3869 | forwCoolFreon->SetVisibility(kTRUE); | |
3870 | forwCoolFreon->SetLineColor(kBlue); // Blue | |
3871 | forwCoolFreon->SetLineWidth(1); | |
3872 | forwCoolFreon->SetFillColor(forwCoolFreon->GetLineColor()); | |
3873 | forwCoolFreon->SetFillStyle(4000); // 0% transparent | |
3874 | ||
798b4e0c | 3875 | TGeoVolume *extCoolTube = new TGeoVolume("ITSsuppSPDSideAExtTrayCoolTube", |
3876 | coolTubeExt, medIn); | |
3877 | ||
3878 | extCoolTube->SetVisibility(kTRUE); | |
3879 | extCoolTube->SetLineColor(kGray); // as in GeometrySPD | |
3880 | extCoolTube->SetLineWidth(1); | |
3881 | extCoolTube->SetFillColor(extCoolTube->GetLineColor()); | |
3882 | extCoolTube->SetFillStyle(4000); // 0% transparent | |
3883 | ||
96eb8210 | 3884 | TGeoVolume *extCoolFreon = new TGeoVolume("ITSsuppSPDSideAExtTrayFreon", |
3885 | freonTubeExt, medFreon); | |
3886 | ||
3887 | extCoolFreon->SetVisibility(kTRUE); | |
3888 | extCoolFreon->SetLineColor(kBlue); // Blue | |
3889 | extCoolFreon->SetLineWidth(1); | |
3890 | extCoolFreon->SetFillColor(extCoolFreon->GetLineColor()); | |
3891 | extCoolFreon->SetFillStyle(4000); // 0% transparent | |
3892 | ||
798b4e0c | 3893 | TGeoVolume *forwOptFibs = new TGeoVolume("ITSsuppSPDSideAForwTrayOptFibs", |
3894 | optFibsForw, medFibs); | |
3895 | ||
3896 | forwOptFibs->SetVisibility(kTRUE); | |
3897 | forwOptFibs->SetLineColor(kOrange); // Orange | |
3898 | forwOptFibs->SetLineWidth(1); | |
3899 | forwOptFibs->SetFillColor(forwOptFibs->GetLineColor()); | |
3900 | forwOptFibs->SetFillStyle(4000); // 0% transparent | |
3901 | ||
3902 | TGeoVolume *extOptFibs = new TGeoVolume("ITSsuppSPDSideAExtTrayOptFibs", | |
3903 | optFibsExt, medFibs); | |
3904 | ||
3905 | extOptFibs->SetVisibility(kTRUE); | |
3906 | extOptFibs->SetLineColor(kOrange); // Orange | |
3907 | extOptFibs->SetLineWidth(1); | |
3908 | extOptFibs->SetFillColor(extOptFibs->GetLineColor()); | |
3909 | extOptFibs->SetFillStyle(4000); // 0% transparent | |
3910 | ||
57126ea1 | 3911 | TGeoVolume *forwLowCabsCu = new TGeoVolume("ITSsuppSPDSideAForwLowCabsCu", |
3912 | lowCablesForwCu, medCu); | |
3913 | ||
3914 | forwLowCabsCu->SetVisibility(kTRUE); | |
3915 | forwLowCabsCu->SetLineColor(kRed); // Red | |
3916 | forwLowCabsCu->SetLineWidth(1); | |
3917 | forwLowCabsCu->SetFillColor(forwLowCabsCu->GetLineColor()); | |
3918 | forwLowCabsCu->SetFillStyle(4000); // 0% transparent | |
3919 | ||
3920 | TGeoVolume *forwLowCabsPUR = new TGeoVolume("ITSsuppSPDSideAForwLowCabsPUR", | |
3921 | lowCablesForwPUR, medPUR); | |
3922 | ||
3923 | forwLowCabsPUR->SetVisibility(kTRUE); | |
3924 | forwLowCabsPUR->SetLineColor(kBlack); // Black | |
3925 | forwLowCabsPUR->SetLineWidth(1); | |
3926 | forwLowCabsPUR->SetFillColor(forwLowCabsPUR->GetLineColor()); | |
3927 | forwLowCabsPUR->SetFillStyle(4000); // 0% transparent | |
3928 | ||
3929 | TGeoVolume *extLowCabsCu = new TGeoVolume("ITSsuppSPDSideAExtLowCabsCu", | |
3930 | lowCablesExtCu, medCu); | |
3931 | ||
3932 | extLowCabsCu->SetVisibility(kTRUE); | |
3933 | extLowCabsCu->SetLineColor(kRed); // Red | |
3934 | extLowCabsCu->SetLineWidth(1); | |
3935 | extLowCabsCu->SetFillColor(extLowCabsCu->GetLineColor()); | |
3936 | extLowCabsCu->SetFillStyle(4000); // 0% transparent | |
3937 | ||
3938 | TGeoVolume *extLowCabsPUR = new TGeoVolume("ITSsuppSPDSideAExtLowCabsPUR", | |
3939 | lowCablesExtPUR, medPUR); | |
3940 | ||
3941 | extLowCabsPUR->SetVisibility(kTRUE); | |
3942 | extLowCabsPUR->SetLineColor(kBlack); // Black | |
3943 | extLowCabsPUR->SetLineWidth(1); | |
3944 | extLowCabsPUR->SetFillColor(extLowCabsPUR->GetLineColor()); | |
3945 | extLowCabsPUR->SetFillStyle(4000); // 0% transparent | |
3946 | ||
3947 | TGeoVolume *forwHiCabsCu = new TGeoVolume("ITSsuppSPDSideAForwTrayHiCabsCu", | |
3948 | hiCablesForwCu, medCu); | |
3949 | ||
3950 | forwHiCabsCu->SetVisibility(kTRUE); | |
3951 | forwHiCabsCu->SetLineColor(kRed); // Red | |
3952 | forwHiCabsCu->SetLineWidth(1); | |
3953 | forwHiCabsCu->SetFillColor(forwHiCabsCu->GetLineColor()); | |
3954 | forwHiCabsCu->SetFillStyle(4000); // 0% transparent | |
3955 | ||
3956 | TGeoVolume *forwHiCabsPUR = new TGeoVolume("ITSsuppSPDSideAForwTrayHiCabsPUR", | |
3957 | hiCablesForwPUR, medPUR); | |
3958 | ||
3959 | forwHiCabsPUR->SetVisibility(kTRUE); | |
3960 | forwHiCabsPUR->SetLineColor(kBlack); // Black | |
3961 | forwHiCabsPUR->SetLineWidth(1); | |
3962 | forwHiCabsPUR->SetFillColor(forwHiCabsPUR->GetLineColor()); | |
3963 | forwHiCabsPUR->SetFillStyle(4000); // 0% transparent | |
3964 | ||
3965 | TGeoVolume *extHiCabsCu = new TGeoVolume("ITSsuppSPDSideAExtTrayHiCabsCu", | |
3966 | hiCablesExtCu, medCu); | |
3967 | ||
3968 | extHiCabsCu->SetVisibility(kTRUE); | |
3969 | extHiCabsCu->SetLineColor(kRed); // Red | |
3970 | extHiCabsCu->SetLineWidth(1); | |
3971 | extHiCabsCu->SetFillColor(extHiCabsCu->GetLineColor()); | |
3972 | extHiCabsCu->SetFillStyle(4000); // 0% transparent | |
3973 | ||
3974 | TGeoVolume *extHiCabsPUR = new TGeoVolume("ITSsuppSPDSideAExtTrayHiCabsPUR", | |
3975 | hiCablesExtPUR, medPUR); | |
3976 | ||
3977 | extHiCabsPUR->SetVisibility(kTRUE); | |
3978 | extHiCabsPUR->SetLineColor(kBlack); // Black | |
3979 | extHiCabsPUR->SetLineWidth(1); | |
3980 | extHiCabsPUR->SetFillColor(extHiCabsPUR->GetLineColor()); | |
3981 | extHiCabsPUR->SetFillStyle(4000); // 0% transparent | |
3982 | ||
3983 | TGeoVolume *forwCoaxCu = new TGeoVolume("ITSsuppSPDSideAForwTrayCoaxCu", | |
3984 | coaxCablesForwCu, medCu); | |
3985 | ||
3986 | forwCoaxCu->SetVisibility(kTRUE); | |
3987 | forwCoaxCu->SetLineColor(kRed); // Red | |
3988 | forwCoaxCu->SetLineWidth(1); | |
3989 | forwCoaxCu->SetFillColor(forwCoaxCu->GetLineColor()); | |
3990 | forwCoaxCu->SetFillStyle(4000); // 0% transparent | |
3991 | ||
d8826f33 | 3992 | TGeoVolume *forwCoaxMeg = new TGeoVolume("ITSsuppSPDSideAForwTrayCoaxMeg", |
3993 | coaxCablesForwMeg, medMeg); | |
57126ea1 | 3994 | |
d8826f33 | 3995 | forwCoaxMeg->SetVisibility(kTRUE); |
3996 | forwCoaxMeg->SetLineColor(kBlack); // Black | |
3997 | forwCoaxMeg->SetLineWidth(1); | |
3998 | forwCoaxMeg->SetFillColor(forwCoaxMeg->GetLineColor()); | |
3999 | forwCoaxMeg->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 4000 | |
4001 | TGeoVolume *extCoaxCu = new TGeoVolume("ITSsuppSPDSideAExtTrayCoaxCu", | |
4002 | coaxCablesExtCu, medCu); | |
4003 | ||
4004 | extCoaxCu->SetVisibility(kTRUE); | |
4005 | extCoaxCu->SetLineColor(kRed); // Red | |
4006 | extCoaxCu->SetLineWidth(1); | |
4007 | extCoaxCu->SetFillColor(extCoaxCu->GetLineColor()); | |
4008 | extCoaxCu->SetFillStyle(4000); // 0% transparent | |
4009 | ||
d8826f33 | 4010 | TGeoVolume *extCoaxMeg = new TGeoVolume("ITSsuppSPDSideAExtTrayCoaxMeg", |
4011 | coaxCablesExtMeg, medMeg); | |
57126ea1 | 4012 | |
d8826f33 | 4013 | extCoaxMeg->SetVisibility(kTRUE); |
4014 | extCoaxMeg->SetLineColor(kBlack); // Black | |
4015 | extCoaxMeg->SetLineWidth(1); | |
4016 | extCoaxMeg->SetFillColor(extCoaxMeg->GetLineColor()); | |
4017 | extCoaxMeg->SetFillStyle(4000); // 0% transparent | |
96eb8210 | 4018 | |
798b4e0c | 4019 | |
4020 | // Now build up the trays | |
4021 | yloc = forwTrayLowerFace->GetDY(); | |
4022 | zloc = forwTrayLowerFace->GetDZ(); | |
4023 | cableTrayAForw->AddNode(forwTrayABase, 1, | |
4024 | new TGeoTranslation(0, yloc, zloc)); | |
4025 | ||
4026 | xloc = kForwardTrayWide/2; | |
4027 | cableTrayAForw->AddNode(forwTrayASide, 1, | |
4028 | new TGeoCombiTrans( xloc, 0, 0, | |
4029 | new TGeoRotation("",90,-90,-90))); | |
4030 | cableTrayAForw->AddNode(forwTrayASide, 2, | |
4031 | new TGeoCombiTrans(-xloc+kForwardTrayThick, 0, 0, | |
4032 | new TGeoRotation("",90,-90,-90))); | |
4033 | ||
4034 | yloc = kForwardTrayFirstHigh - forwTrayShortCover->GetDY(); | |
4035 | zloc = forwTrayShortCover->GetDZ(); | |
4036 | cableTrayAForw->AddNode(forwTrayACoverShort, 1, | |
4037 | new TGeoTranslation(0, yloc, zloc)); | |
4038 | ||
4039 | yloc = kForwardTraySecondHigh - forwTrayLongCover->GetDY(); | |
4040 | zloc = kForwardTrayFirstLen + forwTrayLongCover->GetDZ(); | |
4041 | cableTrayAForw->AddNode(forwTrayACoverLong, 1, | |
4042 | new TGeoTranslation(0, yloc, zloc)); | |
4043 | ||
4044 | xloc = kForwardTrayWide/2 - kForwardTrayThick - forwTrayWing->GetDX(); | |
4045 | yloc = kForwardTrayFirstHigh - kForwardTrayThick - forwTrayWing->GetDY(); | |
4046 | zloc = kForwardTrayFirstLen - forwTrayWing->GetDZ(); | |
4047 | cableTrayAForw->AddNode(forwTrayAWing, 1, | |
4048 | new TGeoTranslation( xloc, yloc, zloc)); | |
4049 | cableTrayAForw->AddNode(forwTrayAWing, 2, | |
4050 | new TGeoTranslation(-xloc, yloc, zloc)); | |
4051 | ||
4052 | yloc = kForwardTrayThick + kForwardTrayInterSpace - forwTrayPlane->GetDY(); | |
4053 | zloc = forwTrayPlane->GetDZ(); | |
4054 | cableTrayAForw->AddNode(forwTrayAPlane, 1, | |
4055 | new TGeoTranslation(0, yloc, zloc)); | |
4056 | ||
4057 | yloc = kForwardTrayThick + forwTrayWall->GetDY(); | |
4058 | zloc = forwTrayWall->GetDZ(); | |
4059 | cableTrayAForw->AddNode(forwTrayAWall, 1, | |
4060 | new TGeoTranslation(0, yloc, zloc)); | |
4061 | ||
96eb8210 | 4062 | forwCoolTube->AddNode(forwCoolFreon, 1, 0); |
4063 | ||
798b4e0c | 4064 | yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY() |
4065 | + coolTubeForw->GetRmax(); | |
4066 | zloc = coolTubeForw->GetDz(); | |
4067 | cableTrayAForw->AddNode(forwCoolTube, 1, | |
4068 | new TGeoTranslation(0, yloc, zloc)); | |
4069 | ||
1c5895a3 | 4070 | xloc = optFibsForw->GetZ(1) + coolTubeForw->GetRmax(); |
4071 | yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY(); | |
798b4e0c | 4072 | cableTrayAForw->AddNode(forwOptFibs, 1, |
1c5895a3 | 4073 | new TGeoCombiTrans( xloc, yloc, 0, |
4074 | new TGeoRotation("",-90.,90.,90.))); | |
798b4e0c | 4075 | |
1c5895a3 | 4076 | xloc = 2*optFibsForw->GetZ(1) + lowCablesForwCu->GetZ(1) + |
4077 | coolTubeForw->GetRmax(); | |
4078 | yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY(); | |
57126ea1 | 4079 | cableTrayAForw->AddNode(forwLowCabsCu, 1, |
1c5895a3 | 4080 | new TGeoCombiTrans( xloc, yloc, 0, |
4081 | new TGeoRotation("",-90.,90.,90.))); | |
57126ea1 | 4082 | cableTrayAForw->AddNode(forwLowCabsPUR, 1, |
1c5895a3 | 4083 | new TGeoCombiTrans( xloc, yloc, 0, |
4084 | new TGeoRotation("",-90.,90.,90.))); | |
798b4e0c | 4085 | |
1c5895a3 | 4086 | xloc = 2*optFibsForw->GetZ(1) + 2*lowCablesForwCu->GetZ(1) + |
4087 | hiCablesForwCu->GetZ(1) + coolTubeForw->GetRmax(); | |
4088 | yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY(); | |
57126ea1 | 4089 | cableTrayAForw->AddNode(forwHiCabsCu, 1, |
1c5895a3 | 4090 | new TGeoCombiTrans( xloc, yloc, 0, |
4091 | new TGeoRotation("",-90.,90.,90.))); | |
57126ea1 | 4092 | cableTrayAForw->AddNode(forwHiCabsPUR, 1, |
1c5895a3 | 4093 | new TGeoCombiTrans( xloc, yloc, 0, |
4094 | new TGeoRotation("",-90.,90.,90.))); | |
96eb8210 | 4095 | |
1c5895a3 | 4096 | xloc = coaxCablesForwCu->GetZ(1) + coolTubeForw->GetRmax(); |
4097 | yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY(); | |
57126ea1 | 4098 | cableTrayAForw->AddNode(forwCoaxCu, 1, |
1c5895a3 | 4099 | new TGeoCombiTrans(-xloc, yloc, 0, |
4100 | new TGeoRotation("",-90.,90.,90.))); | |
d8826f33 | 4101 | cableTrayAForw->AddNode(forwCoaxMeg, 1, |
1c5895a3 | 4102 | new TGeoCombiTrans(-xloc, yloc, 0, |
4103 | new TGeoRotation("",-90.,90.,90.))); | |
57126ea1 | 4104 | |
798b4e0c | 4105 | // To simplify following placement in MARS, origin is on top |
4106 | yloc = -kExternalTrayHigh + kExternalTrayThick/2; | |
4107 | zloc = kExternalTrayLen/2; | |
4108 | cableTrayAExt->AddNode(extTrayAHorFace, 1, | |
4109 | new TGeoTranslation( 0, yloc, zloc)); | |
4110 | ||
4111 | xloc = kExternalTrayWide/2 - kExternalTrayThick/2; | |
4112 | yloc = -kExternalTrayHigh/2; | |
4113 | cableTrayAExt->AddNode(extTrayAVerFace, 1, | |
4114 | new TGeoTranslation( xloc, yloc, zloc)); | |
4115 | cableTrayAExt->AddNode(extTrayAVerFace, 2, | |
4116 | new TGeoTranslation(-xloc, yloc, zloc)); | |
4117 | ||
4118 | yloc = -kExternalTrayThick/2; | |
4119 | cableTrayAExt->AddNode(extTrayAHorFace, 2, | |
4120 | new TGeoTranslation( 0, yloc, zloc)); | |
4121 | ||
4122 | yloc = -kExternalTrayHigh | |
4123 | + kExternalTrayThick + kForwardTrayInterSpace - kExternalTrayThick/2; | |
4124 | cableTrayAExt->AddNode(extTrayAHorFace, 3, | |
4125 | new TGeoTranslation( 0, yloc, zloc)); | |
4126 | ||
4127 | yloc = -kExternalTrayHigh + kExternalTrayThick + extTrayWall->GetDY(); | |
4128 | cableTrayAExt->AddNode(extTrayAWall, 1, | |
4129 | new TGeoTranslation( 0, yloc, zloc)); | |
4130 | ||
96eb8210 | 4131 | extCoolTube->AddNode(extCoolFreon, 1, 0); |
4132 | ||
798b4e0c | 4133 | yloc = -kExternalTrayHigh + 2*kExternalTrayThick + 2*extTrayWall->GetDY() |
4134 | + coolTubeExt->GetRmax(); | |
4135 | zloc = coolTubeExt->GetDz(); | |
4136 | cableTrayAExt->AddNode(extCoolTube, 1, | |
4137 | new TGeoTranslation(0, yloc, zloc)); | |
4138 | ||
57126ea1 | 4139 | xloc = optFibsExt->GetZ(1) + coolTubeExt->GetRmax(); |
798b4e0c | 4140 | cableTrayAExt->AddNode(extOptFibs, 1, |
4141 | new TGeoCombiTrans( xloc, 0, 0, | |
4142 | new TGeoRotation("",90,-90,-90))); | |
4143 | ||
57126ea1 | 4144 | xloc = coolTubeExt->GetRmax(); |
4145 | cableTrayAExt->AddNode(extLowCabsCu, 1, | |
4146 | new TGeoCombiTrans(-xloc, 0, 0, | |
4147 | new TGeoRotation("",90,-90,-90))); | |
4148 | cableTrayAExt->AddNode(extLowCabsPUR, 1, | |
798b4e0c | 4149 | new TGeoCombiTrans(-xloc, 0, 0, |
4150 | new TGeoRotation("",90,-90,-90))); | |
4151 | ||
57126ea1 | 4152 | xloc = lowCablesExtCu->GetZ(1) + coolTubeExt->GetRmax(); |
4153 | cableTrayAExt->AddNode(extHiCabsCu, 1, | |
4154 | new TGeoCombiTrans(-xloc, 0, 0, | |
4155 | new TGeoRotation("",90,-90,-90))); | |
4156 | cableTrayAExt->AddNode(extHiCabsPUR, 1, | |
96eb8210 | 4157 | new TGeoCombiTrans(-xloc, 0, 0, |
4158 | new TGeoRotation("",90,-90,-90))); | |
4159 | ||
57126ea1 | 4160 | xloc = coaxCablesExtCu->GetZ(1) + optFibsExt->GetZ(1) + |
4161 | coolTubeExt->GetRmax(); | |
4162 | cableTrayAExt->AddNode(extCoaxCu, 1, | |
4163 | new TGeoCombiTrans( xloc, 0, 0, | |
4164 | new TGeoRotation("",90,-90,-90))); | |
d8826f33 | 4165 | cableTrayAExt->AddNode(extCoaxMeg, 1, |
57126ea1 | 4166 | new TGeoCombiTrans( xloc, 0, 0, |
4167 | new TGeoRotation("",90,-90,-90))); | |
4168 | ||
798b4e0c | 4169 | |
4170 | // Finally put everything in the mother volume | |
4171 | Double_t rExtTray = kTrayAR2Trans + kExternalTrayHigh; | |
4172 | ||
4173 | moth->AddNode(cableTrayAForw,1, | |
4174 | new TGeoTranslation( 0, kTrayAR1Trans, kTrayAZTrans)); | |
4175 | moth->AddNode(cableTrayAForw,2, | |
4176 | new TGeoCombiTrans( 0,-kTrayAR1Trans, kTrayAZTrans, | |
4177 | new TGeoRotation("",180, 0, 0))); | |
4178 | ||
4179 | yloc = kTrayAR1Trans + kExternalTrayHigh; | |
4180 | zloc = kTrayAZTrans + kForwardTrayTotalLen; | |
4181 | moth->AddNode(cableTrayAExt,1, | |
4182 | new TGeoCombiTrans( 0, yloc, zloc, | |
4183 | new TGeoRotation("", 0,-kTrayAZRot, 0))); | |
4184 | moth->AddNode(cableTrayAExt,2, | |
4185 | new TGeoCombiTrans( 0,-yloc, zloc, | |
4186 | new TGeoRotation("",180,-kTrayAZRot, 0))); | |
4187 | ||
4188 | alpharot = kTrayAFirstRotAng + kTrayASecondRotAng; | |
4189 | xloc = kTrayAR2Trans*SinD(alpharot); | |
4190 | yloc = kTrayAR2Trans*CosD(alpharot); | |
4191 | moth->AddNode(cableTrayAForw,3, | |
4192 | new TGeoCombiTrans( xloc, yloc, kTrayAZTrans, | |
4193 | new TGeoRotation("",-alpharot,0,0) ) ); | |
4194 | xloc = rExtTray*SinD(alpharot); | |
4195 | yloc = rExtTray*CosD(alpharot); | |
4196 | moth->AddNode(cableTrayAExt,3, | |
4197 | new TGeoCombiTrans( xloc, yloc, zloc, | |
4198 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
4199 | ||
4200 | alpharot += 180; | |
4201 | xloc = kTrayAR2Trans*SinD(alpharot); | |
4202 | yloc = kTrayAR2Trans*CosD(alpharot); | |
4203 | moth->AddNode(cableTrayAForw,4, | |
4204 | new TGeoCombiTrans( xloc, yloc, kTrayAZTrans, | |
4205 | new TGeoRotation("",-alpharot,0,0) ) ); | |
4206 | xloc = rExtTray*SinD(alpharot); | |
4207 | yloc = rExtTray*CosD(alpharot); | |
4208 | moth->AddNode(cableTrayAExt,4, | |
4209 | new TGeoCombiTrans( xloc, yloc, zloc, | |
4210 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
4211 | ||
4212 | alpharot = - kTrayAFirstRotAng - kTrayASecondRotAng; | |
4213 | xloc = kTrayAR2Trans*SinD(alpharot); | |
4214 | yloc = kTrayAR2Trans*CosD(alpharot); | |
4215 | moth->AddNode(cableTrayAForw,5, | |
4216 | new TGeoCombiTrans( xloc, yloc, kTrayAZTrans, | |
4217 | new TGeoRotation("",-alpharot,0,0) ) ); | |
4218 | xloc = rExtTray*SinD(alpharot); | |
4219 | yloc = rExtTray*CosD(alpharot); | |
4220 | moth->AddNode(cableTrayAExt,5, | |
4221 | new TGeoCombiTrans( xloc, yloc, zloc, | |
4222 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
4223 | ||
4224 | alpharot += 180; | |
4225 | xloc = kTrayAR2Trans*SinD(alpharot); | |
4226 | yloc = kTrayAR2Trans*CosD(alpharot); | |
4227 | moth->AddNode(cableTrayAForw,6, | |
4228 | new TGeoCombiTrans( xloc, yloc, kTrayAZTrans, | |
4229 | new TGeoRotation("",-alpharot,0,0) ) ); | |
4230 | xloc = rExtTray*SinD(alpharot); | |
4231 | yloc = rExtTray*CosD(alpharot); | |
4232 | moth->AddNode(cableTrayAExt,6, | |
4233 | new TGeoCombiTrans( xloc, yloc, zloc, | |
4234 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
4235 | ||
4236 | alpharot = kTrayAFirstRotAng + 3*kTrayASecondRotAng; | |
4237 | xloc = kTrayAR2Trans*SinD(alpharot); | |
4238 | yloc = kTrayAR2Trans*CosD(alpharot); | |
4239 | moth->AddNode(cableTrayAForw,7, | |
4240 | new TGeoCombiTrans( xloc, yloc, kTrayAZTrans, | |
4241 | new TGeoRotation("",-alpharot,0,0) ) ); | |
4242 | xloc = rExtTray*SinD(alpharot); | |
4243 | yloc = rExtTray*CosD(alpharot); | |
4244 | moth->AddNode(cableTrayAExt,7, | |
4245 | new TGeoCombiTrans( xloc, yloc, zloc, | |
4246 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
4247 | ||
4248 | alpharot += 180; | |
4249 | xloc = kTrayAR2Trans*SinD(alpharot); | |
4250 | yloc = kTrayAR2Trans*CosD(alpharot); | |
4251 | moth->AddNode(cableTrayAForw,8, | |
4252 | new TGeoCombiTrans( xloc, yloc, kTrayAZTrans, | |
4253 | new TGeoRotation("",-alpharot,0,0) ) ); | |
4254 | xloc = rExtTray*SinD(alpharot); | |
4255 | yloc = rExtTray*CosD(alpharot); | |
4256 | moth->AddNode(cableTrayAExt,8, | |
4257 | new TGeoCombiTrans( xloc, yloc, zloc, | |
4258 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
4259 | ||
4260 | alpharot = - kTrayAFirstRotAng - 3*kTrayASecondRotAng; | |
4261 | xloc = kTrayAR2Trans*SinD(alpharot); | |
4262 | yloc = kTrayAR2Trans*CosD(alpharot); | |
4263 | moth->AddNode(cableTrayAForw,9, | |
4264 | new TGeoCombiTrans( xloc, yloc, kTrayAZTrans, | |
4265 | new TGeoRotation("",-alpharot,0,0) ) ); | |
4266 | xloc = rExtTray*SinD(alpharot); | |
4267 | yloc = rExtTray*CosD(alpharot); | |
4268 | moth->AddNode(cableTrayAExt,9, | |
4269 | new TGeoCombiTrans( xloc, yloc, zloc, | |
4270 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
4271 | ||
4272 | alpharot += 180; | |
4273 | xloc = kTrayAR2Trans*SinD(alpharot); | |
4274 | yloc = kTrayAR2Trans*CosD(alpharot); | |
4275 | moth->AddNode(cableTrayAForw,10, | |
4276 | new TGeoCombiTrans( xloc, yloc, kTrayAZTrans, | |
4277 | new TGeoRotation("",-alpharot,0,0) ) ); | |
4278 | xloc = rExtTray*SinD(alpharot); | |
4279 | yloc = rExtTray*CosD(alpharot); | |
4280 | moth->AddNode(cableTrayAExt,10, | |
4281 | new TGeoCombiTrans( xloc, yloc, zloc, | |
4282 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
4283 | ||
4284 | ||
4285 | return; | |
4286 | } | |
4287 | ||
aa177c73 | 4288 | //______________________________________________________________________ |
4289 | void AliITSv11GeometrySupport::SPDCableTraysSideC(TGeoVolume *moth, | |
43aefea7 | 4290 | const TGeoManager *mgr){ |
aa177c73 | 4291 | // |
4292 | // Creates the SPD cable trays which are outside the ITS support cones | |
4293 | // but still inside the TPC on Side C | |
4294 | // (part of this code is taken or anyway inspired to ServicesCableSupport | |
4295 | // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
4296 | // | |
4297 | // Input: | |
4298 | // moth : the TGeoVolume owing the volume structure | |
4299 | // mgr : the GeoManager (default gGeoManager) | |
4300 | // Output: | |
4301 | // | |
4302 | // Return: | |
4303 | // | |
4304 | // Created: ??? Bjorn S. Nilsen | |
4305 | // Updated: 22 Apr 2010 Mario Sitta | |
96eb8210 | 4306 | // Updated: 10 Jun 2010 Mario Sitta Freon inside cooling pipes |
57126ea1 | 4307 | // Updated: 08 Sep 2010 Mario Sitta |
1c5895a3 | 4308 | // Updated: 14 Sep 2010 Mario Sitta Cables prolonged till cone |
aa177c73 | 4309 | // |
4310 | // Technical data are taken from AutoCAD drawings and other (oral) | |
4311 | // information given by D.Elia | |
57126ea1 | 4312 | // Optical fibers and voltage cables are approximated with mean materials |
4313 | // and square cross sections, but preserving the total material budget. | |
aa177c73 | 4314 | // |
4315 | ||
4316 | // Dimensions and positions of the C-Side Cable Tray elements | |
4317 | const Int_t kNumTraysSideC = 10; | |
4318 | ||
1c5895a3 | 4319 | const Double_t kTrayCCablesOutRot = 75.000 *fgkDegree;// Computed |
4320 | const Double_t kTrayCCablesZLenOut = 245.000 *fgkmm;// Computed | |
4321 | ||
aa177c73 | 4322 | const Double_t kTrayCHalfWide = 6.350 *fgkcm; |
4323 | const Double_t kTrayCLength1 = 172.800 *fgkcm; | |
4324 | const Double_t kTrayCLength2 = 189.300 *fgkcm; | |
4325 | const Double_t kTrayCFirstLen = 435.000 *fgkmm; | |
4326 | const Double_t kTrayCFirstHigh = 83.000 *fgkmm;//!!!TO BE CHECKED!!! | |
4327 | const Double_t kTrayCSecondHigh = 52.700 *fgkmm;//!!!TO BE CHECKED!!! | |
4328 | const Double_t kTrayCThick = 0.200 *fgkcm; | |
4329 | const Double_t kTrayCInterSpace = 18.000 *fgkmm;//!!!TO BE CHECKED!!! | |
4330 | const Double_t kTrayCFoldAngle = 5.000 *fgkDegree; | |
4331 | ||
57126ea1 | 4332 | const Double_t kCoolingTubeRmin = 2.000 *fgkmm; |
4333 | const Double_t kCoolingTubeRmax = 3.000 *fgkmm; | |
aa177c73 | 4334 | const Double_t kOpticalFibersSect = 8.696 *fgkmm;//!!!ESTIMATED!!! |
57126ea1 | 4335 | const Double_t kLowVoltCableSectCu = 7.675 *fgkmm;// Computed |
4336 | const Double_t kLowVoltCableHighPUR = 1.000 *fgkmm;// Computed | |
4337 | const Double_t kHiVoltCableSectCu = 1.535 *fgkmm;// Computed | |
4338 | const Double_t kHiVoltCableHighPUR = 0.500 *fgkmm;// Computed | |
d8826f33 | 4339 | const Double_t kCoaxCableSectCu = 6.024 *fgkmm;// Computed |
4340 | const Double_t kCoaxCableHighMeg = 5.695 *fgkmm;// Computed | |
aa177c73 | 4341 | |
4342 | // Overall position and rotation of the C-Side Cable Trays | |
4343 | const Double_t kTraySideCRPos = 45.300 *fgkcm; | |
4344 | const Double_t kTraySideCZPos = -102.400 *fgkcm; | |
4345 | const Double_t kTraySideCAlphaRot[kNumTraysSideC/2] = | |
4346 | { 0.0, 41.0, -41.0, 76.0, -76.0}; | |
4347 | // From position of the other trays | |
4348 | ||
4349 | ||
4350 | // Local variables | |
4351 | Double_t xprof[8], yprof[8]; | |
4352 | Double_t xloc, yloc, zloc, delta, alpharot; | |
4353 | ||
4354 | ||
4355 | // The single C-Side Cable tray as an assembly | |
4356 | TGeoVolumeAssembly *cableTrayC = new TGeoVolumeAssembly("ITSsupportSPDTrayC"); | |
4357 | ||
4358 | // First create all needed shapes | |
4359 | ||
4360 | // The Cable Tray lower face: a Xtru | |
4361 | TGeoXtru *sideCHorFace = new TGeoXtru(2); | |
4362 | ||
4363 | xprof[0] = 0.; | |
4364 | yprof[0] = 0.; | |
4365 | xprof[1] = kTrayCLength1; | |
4366 | yprof[1] = 0.; | |
4367 | xprof[2] = xprof[1] + kTrayCLength2*CosD(kTrayCFoldAngle); | |
4368 | yprof[2] = yprof[1] + kTrayCLength2*SinD(kTrayCFoldAngle); | |
4369 | xprof[3] = xprof[2] - kTrayCThick*SinD(kTrayCFoldAngle); | |
4370 | yprof[3] = yprof[2] + kTrayCThick*CosD(kTrayCFoldAngle); | |
4371 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
4372 | kTrayCThick , xprof[4], yprof[4]); | |
4373 | xprof[5] = 0.; | |
4374 | yprof[5] = kTrayCThick; | |
4375 | ||
4376 | delta = kTrayCHalfWide - kTrayCThick; | |
4377 | ||
4378 | sideCHorFace->DefinePolygon(6, xprof, yprof); | |
4379 | sideCHorFace->DefineSection(0,-delta); | |
4380 | sideCHorFace->DefineSection(1, delta); | |
4381 | ||
4382 | // The Cable Tray middle face: a Xtru | |
4383 | // (somehow duplicate of HorFace, but in this way avoid an overlap with Wall) | |
4384 | TGeoXtru *sideCMidFace = new TGeoXtru(2); | |
4385 | ||
4386 | xprof[0] = 0.; | |
4387 | yprof[0] = kTrayCInterSpace + kTrayCThick; | |
4388 | xprof[1] = kTrayCLength1; | |
4389 | yprof[1] = yprof[0]; | |
4390 | xprof[2] = xprof[1] + kTrayCLength2*CosD(kTrayCFoldAngle); | |
4391 | yprof[2] = yprof[1] + kTrayCLength2*SinD(kTrayCFoldAngle); | |
4392 | xprof[3] = xprof[2] - kTrayCThick*SinD(kTrayCFoldAngle); | |
4393 | yprof[3] = yprof[2] + kTrayCThick*CosD(kTrayCFoldAngle); | |
4394 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
4395 | kTrayCThick , xprof[4], yprof[4]); | |
4396 | xprof[5] = 0.; | |
4397 | yprof[5] = yprof[0] + kTrayCThick; | |
4398 | ||
4399 | delta = kTrayCHalfWide - kTrayCThick; | |
4400 | ||
4401 | sideCMidFace->DefinePolygon(6, xprof, yprof); | |
4402 | sideCMidFace->DefineSection(0,-delta); | |
4403 | sideCMidFace->DefineSection(1, delta); | |
4404 | ||
4405 | // The Cable Tray lower face: a Xtru | |
4406 | TGeoXtru *sideCSideFace = new TGeoXtru(2); | |
4407 | ||
4408 | xprof[0] = 0.; | |
4409 | yprof[0] = 0.; | |
4410 | xprof[1] = kTrayCLength1; | |
4411 | yprof[1] = 0.; | |
4412 | xprof[2] = xprof[1] + kTrayCLength2*CosD(kTrayCFoldAngle); | |
4413 | yprof[2] = yprof[1] + kTrayCLength2*SinD(kTrayCFoldAngle); | |
4414 | xprof[3] = xprof[2] - kTrayCSecondHigh*SinD(kTrayCFoldAngle); | |
4415 | yprof[3] = yprof[2] + kTrayCSecondHigh*CosD(kTrayCFoldAngle); | |
4416 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
4417 | kTrayCSecondHigh , xprof[4], yprof[4]); | |
4418 | xprof[5] = kTrayCFirstLen; | |
4419 | yprof[5] = kTrayCSecondHigh; | |
4420 | xprof[6] = xprof[5]; | |
4421 | yprof[6] = kTrayCFirstHigh; | |
4422 | xprof[7] = xprof[0]; | |
4423 | yprof[7] = yprof[6]; | |
4424 | ||
4425 | sideCSideFace->DefinePolygon(8, xprof, yprof); | |
4426 | sideCSideFace->DefineSection(0, 0); | |
4427 | sideCSideFace->DefineSection(1, kTrayCThick); | |
4428 | ||
4429 | // The short cover: a BBox | |
4430 | TGeoBBox *sideCShortCover = new TGeoBBox(kTrayCFirstLen/2, | |
4431 | kTrayCThick/2, | |
4432 | kTrayCHalfWide-kTrayCThick); | |
4433 | ||
4434 | // The long cover: a Xtru | |
4435 | TGeoXtru *sideCLongCover = new TGeoXtru(2); | |
4436 | ||
4437 | xprof[5] = sideCSideFace->GetX(5); | |
4438 | yprof[5] = sideCSideFace->GetY(5); | |
4439 | xprof[4] = sideCSideFace->GetX(4); | |
4440 | yprof[4] = sideCSideFace->GetY(4); | |
4441 | xprof[3] = sideCSideFace->GetX(3); | |
4442 | yprof[3] = sideCSideFace->GetY(3); | |
4443 | xprof[2] = xprof[3] + kTrayCThick*SinD(kTrayCFoldAngle); | |
4444 | yprof[2] = yprof[3] - kTrayCThick*CosD(kTrayCFoldAngle); | |
4445 | InsidePoint(xprof[5], yprof[5], xprof[4], yprof[4], xprof[3], yprof[3], | |
4446 | -kTrayCThick , xprof[1], yprof[1]); | |
4447 | xprof[0] = xprof[5]; | |
4448 | yprof[0] = yprof[5] - kTrayCThick; | |
4449 | ||
4450 | delta = kTrayCHalfWide - kTrayCThick; | |
4451 | ||
4452 | sideCLongCover->DefinePolygon(6, xprof, yprof); | |
4453 | sideCLongCover->DefineSection(0,-delta); | |
4454 | sideCLongCover->DefineSection(1, delta); | |
4455 | ||
4456 | // The internal wall: a Xtru | |
4457 | TGeoXtru *intWall = new TGeoXtru(2); | |
4458 | ||
4459 | xprof[0] = sideCHorFace->GetX(5); | |
4460 | yprof[0] = sideCHorFace->GetY(5); | |
4461 | xprof[1] = sideCHorFace->GetX(4); | |
4462 | yprof[1] = sideCHorFace->GetY(4); | |
4463 | xprof[2] = sideCHorFace->GetX(3); | |
4464 | yprof[2] = sideCHorFace->GetY(3); | |
4465 | xprof[3] = sideCMidFace->GetX(2); | |
4466 | yprof[3] = sideCMidFace->GetY(2); | |
4467 | xprof[4] = sideCMidFace->GetX(1); | |
4468 | yprof[4] = sideCMidFace->GetY(1); | |
4469 | xprof[5] = sideCMidFace->GetX(0); | |
4470 | yprof[5] = sideCMidFace->GetY(0); | |
4471 | ||
4472 | intWall->DefinePolygon(6, xprof, yprof); | |
4473 | intWall->DefineSection(0,-kTrayCThick/2); | |
4474 | intWall->DefineSection(1, kTrayCThick/2); | |
4475 | ||
4476 | // The horizontal part of the cooling tube inside the tray: a Tube | |
4477 | delta = sideCMidFace->GetX(4) - sideCMidFace->GetX(5); | |
96eb8210 | 4478 | TGeoTube *horTube = new TGeoTube(0, kCoolingTubeRmax, delta/2); |
4479 | ||
4480 | // The freon inside the horizontal part of the cooling tube: a Tube | |
4481 | TGeoTube *horFreon = new TGeoTube(0, kCoolingTubeRmin, delta/2); | |
aa177c73 | 4482 | |
4483 | // The inclined part of the cooling tube inside the tray: a Ctub | |
4484 | Double_t x3, y3, x4, y4; | |
4485 | x3 = sideCMidFace->GetX(3); | |
4486 | y3 = sideCMidFace->GetY(3); | |
4487 | x4 = sideCMidFace->GetX(4); | |
4488 | y4 = sideCMidFace->GetY(4); | |
4489 | delta = TMath::Sqrt( (x4 - x3 + kCoolingTubeRmax*SinD(kTrayCFoldAngle))* | |
4490 | (x4 - x3 + kCoolingTubeRmax*SinD(kTrayCFoldAngle)) + | |
4491 | (y4 + kCoolingTubeRmax - y3 - kCoolingTubeRmax*SinD(kTrayCFoldAngle))* | |
4492 | (y4 + kCoolingTubeRmax - y3 - kCoolingTubeRmax*SinD(kTrayCFoldAngle)) ); | |
4493 | ||
96eb8210 | 4494 | TGeoCtub *incTube = new TGeoCtub(0, kCoolingTubeRmax, delta/2, 0, 360, |
4495 | 0, SinD(kTrayCFoldAngle),-CosD(kTrayCFoldAngle), | |
4496 | 0, 0, 1); | |
4497 | ||
4498 | // The freon inside the inclined part of the cooling tube: a Ctub | |
4499 | TGeoCtub *incFreon = new TGeoCtub(0, kCoolingTubeRmin, delta/2, 0, 360, | |
aa177c73 | 4500 | 0, SinD(kTrayCFoldAngle),-CosD(kTrayCFoldAngle), |
4501 | 0, 0, 1); | |
4502 | ||
1c5895a3 | 4503 | // The part of the cooling tube outside the tray: a Ctub |
4504 | TGeoCtub *outTube = new TGeoCtub(0, kCoolingTubeRmax, | |
4505 | 0.5*kTrayCCablesZLenOut/SinD(kTrayCCablesOutRot), | |
4506 | 0, 360, | |
4507 | 0, 0, -1, | |
4508 | 0,-SinD(kTrayCCablesOutRot), CosD(kTrayCCablesOutRot)); | |
4509 | ||
4510 | // The freon inside the part of the cooling tube outside the tray: a Ctub | |
4511 | TGeoCtub *outFreon = new TGeoCtub(0, kCoolingTubeRmin, | |
4512 | outTube->GetDz(), | |
4513 | 0, 360, | |
4514 | 0, 0, -1, | |
4515 | 0,-SinD(kTrayCCablesOutRot), CosD(kTrayCCablesOutRot)); | |
4516 | ||
aa177c73 | 4517 | // The optical fibers inside the tray: a Xtru |
4518 | TGeoXtru *optFibs = new TGeoXtru(2); | |
4519 | ||
1c5895a3 | 4520 | xprof[0] = -kTrayCCablesZLenOut; |
4521 | yprof[0] = xprof[0]/TanD(kTrayCCablesOutRot); | |
4522 | xprof[1] = sideCMidFace->GetX(5); | |
4523 | yprof[1] = sideCMidFace->GetY(5); | |
4524 | xprof[2] = sideCMidFace->GetX(4); | |
4525 | yprof[2] = sideCMidFace->GetY(4); | |
4526 | xprof[3] = sideCMidFace->GetX(3); | |
4527 | yprof[3] = sideCMidFace->GetY(3); | |
4528 | xprof[4] = xprof[3] - kOpticalFibersSect*SinD(kTrayCFoldAngle); | |
4529 | yprof[4] = yprof[3] + kOpticalFibersSect*CosD(kTrayCFoldAngle); | |
4530 | InsidePoint(xprof[1], yprof[1], xprof[2], yprof[2], xprof[3], yprof[3], | |
4531 | kOpticalFibersSect , xprof[5], yprof[5]); | |
4532 | xprof[6] = 0.; | |
4533 | yprof[6] = yprof[1] + kOpticalFibersSect; | |
4534 | xprof[7] = xprof[0]; | |
4535 | yprof[7] = yprof[0] + kOpticalFibersSect; | |
aa177c73 | 4536 | |
1c5895a3 | 4537 | optFibs->DefinePolygon(8, xprof, yprof); |
aa177c73 | 4538 | optFibs->DefineSection(0, 0); |
4539 | optFibs->DefineSection(1, kOpticalFibersSect); | |
4540 | ||
57126ea1 | 4541 | // The low voltage cables inside the tray: two Xtru |
4542 | TGeoXtru *lowCablesCu = new TGeoXtru(2); | |
4543 | ||
1c5895a3 | 4544 | xprof[0] = -kTrayCCablesZLenOut; |
4545 | yprof[0] = xprof[0]/TanD(kTrayCCablesOutRot); | |
4546 | xprof[1] = sideCMidFace->GetX(5); | |
4547 | yprof[1] = sideCMidFace->GetY(5); | |
4548 | xprof[2] = sideCMidFace->GetX(4); | |
4549 | yprof[2] = sideCMidFace->GetY(4); | |
4550 | xprof[3] = sideCMidFace->GetX(3); | |
4551 | yprof[3] = sideCMidFace->GetY(3); | |
4552 | xprof[4] = xprof[3] - kLowVoltCableSectCu*SinD(kTrayCFoldAngle); | |
4553 | yprof[4] = yprof[3] + kLowVoltCableSectCu*CosD(kTrayCFoldAngle); | |
4554 | InsidePoint(xprof[1], yprof[1], xprof[2], yprof[2], xprof[3], yprof[3], | |
4555 | kLowVoltCableSectCu , xprof[5], yprof[5]); | |
4556 | xprof[6] = 0.; | |
4557 | yprof[6] = yprof[1] + kLowVoltCableSectCu; | |
4558 | xprof[7] = xprof[0]; | |
4559 | yprof[7] = yprof[0] + kLowVoltCableSectCu; | |
57126ea1 | 4560 | |
1c5895a3 | 4561 | lowCablesCu->DefinePolygon(8, xprof, yprof); |
57126ea1 | 4562 | lowCablesCu->DefineSection(0, 0); |
4563 | lowCablesCu->DefineSection(1, kLowVoltCableSectCu); | |
4564 | ||
4565 | TGeoXtru *lowCablesPUR = new TGeoXtru(2); | |
4566 | ||
1c5895a3 | 4567 | xprof[0] = lowCablesCu->GetX(7); |
4568 | yprof[0] = lowCablesCu->GetY(7); | |
4569 | xprof[1] = lowCablesCu->GetX(6); | |
4570 | yprof[1] = lowCablesCu->GetY(6); | |
4571 | xprof[2] = lowCablesCu->GetX(5); | |
4572 | yprof[2] = lowCablesCu->GetY(5); | |
4573 | xprof[3] = lowCablesCu->GetX(4); | |
4574 | yprof[3] = lowCablesCu->GetY(4); | |
4575 | xprof[4] = xprof[3] - kLowVoltCableHighPUR*SinD(kTrayCFoldAngle); | |
4576 | yprof[4] = yprof[3] + kLowVoltCableHighPUR*CosD(kTrayCFoldAngle); | |
4577 | InsidePoint(xprof[1], yprof[1], xprof[2], yprof[2], xprof[3], yprof[3], | |
4578 | kLowVoltCableHighPUR , xprof[5], yprof[5]); | |
4579 | xprof[6] = 0.; | |
4580 | yprof[6] = yprof[1] + kLowVoltCableHighPUR; | |
4581 | xprof[7] = xprof[0]; | |
4582 | yprof[7] = yprof[0] + kLowVoltCableHighPUR; | |
57126ea1 | 4583 | |
1c5895a3 | 4584 | lowCablesPUR->DefinePolygon(8, xprof, yprof); |
57126ea1 | 4585 | lowCablesPUR->DefineSection(0, 0); |
4586 | lowCablesPUR->DefineSection(1, kLowVoltCableSectCu); | |
4587 | ||
4588 | // The high voltage cables inside the tray: two Xtru | |
4589 | TGeoXtru *hiCablesCu = new TGeoXtru(2); | |
aa177c73 | 4590 | |
1c5895a3 | 4591 | xprof[0] = -kTrayCCablesZLenOut; |
4592 | yprof[0] = xprof[0]/TanD(kTrayCCablesOutRot); | |
4593 | xprof[1] = sideCMidFace->GetX(5); | |
4594 | yprof[1] = sideCMidFace->GetY(5); | |
4595 | xprof[2] = sideCMidFace->GetX(4); | |
4596 | yprof[2] = sideCMidFace->GetY(4); | |
4597 | xprof[3] = sideCMidFace->GetX(3); | |
4598 | yprof[3] = sideCMidFace->GetY(3); | |
4599 | xprof[4] = xprof[3] - kHiVoltCableSectCu*SinD(kTrayCFoldAngle); | |
4600 | yprof[4] = yprof[3] + kHiVoltCableSectCu*CosD(kTrayCFoldAngle); | |
4601 | InsidePoint(xprof[1], yprof[1], xprof[2], yprof[2], xprof[3], yprof[3], | |
4602 | kHiVoltCableSectCu , xprof[5], yprof[5]); | |
4603 | xprof[6] = 0.; | |
4604 | yprof[6] = yprof[1] + kHiVoltCableSectCu; | |
4605 | xprof[7] = xprof[0]; | |
4606 | yprof[7] = yprof[0] + kHiVoltCableSectCu; | |
57126ea1 | 4607 | |
1c5895a3 | 4608 | hiCablesCu->DefinePolygon(8, xprof, yprof); |
57126ea1 | 4609 | hiCablesCu->DefineSection(0, 0); |
4610 | hiCablesCu->DefineSection(1, kHiVoltCableSectCu); | |
4611 | ||
4612 | TGeoXtru *hiCablesPUR = new TGeoXtru(2); | |
4613 | ||
1c5895a3 | 4614 | xprof[0] = hiCablesCu->GetX(7); |
4615 | yprof[0] = hiCablesCu->GetY(7); | |
4616 | xprof[1] = hiCablesCu->GetX(6); | |
4617 | yprof[1] = hiCablesCu->GetY(6); | |
4618 | xprof[2] = hiCablesCu->GetX(5); | |
4619 | yprof[2] = hiCablesCu->GetY(5); | |
4620 | xprof[3] = hiCablesCu->GetX(4); | |
4621 | yprof[3] = hiCablesCu->GetY(4); | |
4622 | xprof[4] = xprof[3] - kHiVoltCableHighPUR*SinD(kTrayCFoldAngle); | |
4623 | yprof[4] = yprof[3] + kHiVoltCableHighPUR*CosD(kTrayCFoldAngle); | |
4624 | InsidePoint(xprof[1], yprof[1], xprof[2], yprof[2], xprof[3], yprof[3], | |
4625 | kHiVoltCableHighPUR , xprof[5], yprof[5]); | |
4626 | xprof[6] = 0.; | |
4627 | yprof[6] = yprof[1] + kHiVoltCableHighPUR; | |
4628 | xprof[7] = xprof[0]; | |
4629 | yprof[7] = yprof[0] + kHiVoltCableHighPUR; | |
aa177c73 | 4630 | |
1c5895a3 | 4631 | hiCablesPUR->DefinePolygon(8, xprof, yprof); |
57126ea1 | 4632 | hiCablesPUR->DefineSection(0, 0); |
4633 | hiCablesPUR->DefineSection(1, kHiVoltCableSectCu); | |
aa177c73 | 4634 | |
57126ea1 | 4635 | // The coaxial cables inside the tray: two Xtru |
4636 | TGeoXtru *coaxCablesCu = new TGeoXtru(2); | |
96eb8210 | 4637 | |
1c5895a3 | 4638 | xprof[0] = -kTrayCCablesZLenOut; |
4639 | yprof[0] = xprof[0]/TanD(kTrayCCablesOutRot); | |
4640 | xprof[1] = sideCMidFace->GetX(5); | |
4641 | yprof[1] = sideCMidFace->GetY(5); | |
4642 | xprof[2] = sideCMidFace->GetX(4); | |
4643 | yprof[2] = sideCMidFace->GetY(4); | |
4644 | xprof[3] = sideCMidFace->GetX(3); | |
4645 | yprof[3] = sideCMidFace->GetY(3); | |
4646 | xprof[4] = xprof[3] - kCoaxCableSectCu*SinD(kTrayCFoldAngle); | |
4647 | yprof[4] = yprof[3] + kCoaxCableSectCu*CosD(kTrayCFoldAngle); | |
4648 | InsidePoint(xprof[1], yprof[1], xprof[2], yprof[2], xprof[3], yprof[3], | |
4649 | kCoaxCableSectCu , xprof[5], yprof[5]); | |
4650 | xprof[6] = 0.; | |
4651 | yprof[6] = yprof[1] + kCoaxCableSectCu; | |
4652 | xprof[7] = xprof[0]; | |
4653 | yprof[7] = yprof[0] + kCoaxCableSectCu; | |
57126ea1 | 4654 | |
1c5895a3 | 4655 | coaxCablesCu->DefinePolygon(8, xprof, yprof); |
57126ea1 | 4656 | coaxCablesCu->DefineSection(0, 0); |
4657 | coaxCablesCu->DefineSection(1, kCoaxCableSectCu); | |
4658 | ||
d8826f33 | 4659 | TGeoXtru *coaxCablesMeg = new TGeoXtru(2); |
57126ea1 | 4660 | |
1c5895a3 | 4661 | xprof[0] = coaxCablesCu->GetX(7); |
4662 | yprof[0] = coaxCablesCu->GetY(7); | |
4663 | xprof[1] = coaxCablesCu->GetX(6); | |
4664 | yprof[1] = coaxCablesCu->GetY(6); | |
4665 | xprof[2] = coaxCablesCu->GetX(5); | |
4666 | yprof[2] = coaxCablesCu->GetY(5); | |
4667 | xprof[3] = coaxCablesCu->GetX(4); | |
4668 | yprof[3] = coaxCablesCu->GetY(4); | |
d8826f33 | 4669 | xprof[4] = xprof[3] - kCoaxCableHighMeg*SinD(kTrayCFoldAngle); |
4670 | yprof[4] = yprof[3] + kCoaxCableHighMeg*CosD(kTrayCFoldAngle); | |
1c5895a3 | 4671 | InsidePoint(xprof[1], yprof[1], xprof[2], yprof[2], xprof[3], yprof[3], |
d8826f33 | 4672 | kCoaxCableHighMeg , xprof[5], yprof[5]); |
1c5895a3 | 4673 | xprof[6] = 0.; |
d8826f33 | 4674 | yprof[6] = yprof[1] + kCoaxCableHighMeg; |
1c5895a3 | 4675 | xprof[7] = xprof[0]; |
d8826f33 | 4676 | yprof[7] = yprof[0] + kCoaxCableHighMeg; |
96eb8210 | 4677 | |
d8826f33 | 4678 | coaxCablesMeg->DefinePolygon(8, xprof, yprof); |
4679 | coaxCablesMeg->DefineSection(0, 0); | |
4680 | coaxCablesMeg->DefineSection(1, kCoaxCableSectCu); | |
96eb8210 | 4681 | |
aa177c73 | 4682 | |
4683 | // We have all shapes: now create the real volumes | |
4684 | TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$"); | |
4685 | TGeoMedium *medIn = mgr->GetMedium("ITS_INOX$"); | |
96eb8210 | 4686 | TGeoMedium *medFr = mgr->GetMedium("ITS_Freon$"); |
aa177c73 | 4687 | TGeoMedium *medFibs = mgr->GetMedium("ITS_SDD OPTICFIB$");//!!TO BE CHECKED!! |
57126ea1 | 4688 | TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$"); |
4689 | TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$"); | |
d8826f33 | 4690 | TGeoMedium *medMeg = mgr->GetMedium("ITS_MEGOLON$"); |
aa177c73 | 4691 | |
4692 | TGeoVolume *traySideCHorFace = new TGeoVolume("ITSsuppSPDTraySideCHor", | |
4693 | sideCHorFace, medAl); | |
4694 | ||
4695 | traySideCHorFace->SetVisibility(kTRUE); | |
4696 | traySideCHorFace->SetLineColor(6); // Purple | |
4697 | traySideCHorFace->SetLineWidth(1); | |
4698 | traySideCHorFace->SetFillColor(traySideCHorFace->GetLineColor()); | |
4699 | traySideCHorFace->SetFillStyle(4000); // 0% transparent | |
4700 | ||
4701 | TGeoVolume *traySideCMidFace = new TGeoVolume("ITSsuppSPDTraySideCMid", | |
4702 | sideCMidFace, medAl); | |
4703 | ||
4704 | traySideCMidFace->SetVisibility(kTRUE); | |
4705 | traySideCMidFace->SetLineColor(6); // Purple | |
4706 | traySideCMidFace->SetLineWidth(1); | |
4707 | traySideCMidFace->SetFillColor(traySideCMidFace->GetLineColor()); | |
4708 | traySideCMidFace->SetFillStyle(4000); // 0% transparent | |
4709 | ||
4710 | TGeoVolume *traySideCSideFace = new TGeoVolume("ITSsuppSPDTraySideCSide", | |
4711 | sideCSideFace, medAl); | |
4712 | ||
4713 | traySideCSideFace->SetVisibility(kTRUE); | |
4714 | traySideCSideFace->SetLineColor(6); // Purple | |
4715 | traySideCSideFace->SetLineWidth(1); | |
4716 | traySideCSideFace->SetFillColor(traySideCSideFace->GetLineColor()); | |
4717 | traySideCSideFace->SetFillStyle(4000); // 0% transparent | |
4718 | ||
4719 | TGeoVolume *traySideCShortCover = new TGeoVolume("ITSsuppSPDTraySideCShCov", | |
4720 | sideCShortCover, medAl); | |
4721 | ||
4722 | traySideCShortCover->SetVisibility(kTRUE); | |
4723 | traySideCShortCover->SetLineColor(6); // Purple | |
4724 | traySideCShortCover->SetLineWidth(1); | |
4725 | traySideCShortCover->SetFillColor(traySideCShortCover->GetLineColor()); | |
4726 | traySideCShortCover->SetFillStyle(4000); // 0% transparent | |
4727 | ||
4728 | TGeoVolume *traySideCLongCover = new TGeoVolume("ITSsuppSPDTraySideCLnCov", | |
4729 | sideCLongCover, medAl); | |
4730 | ||
4731 | traySideCLongCover->SetVisibility(kTRUE); | |
4732 | traySideCLongCover->SetLineColor(6); // Purple | |
4733 | traySideCLongCover->SetLineWidth(1); | |
4734 | traySideCLongCover->SetFillColor(traySideCLongCover->GetLineColor()); | |
4735 | traySideCLongCover->SetFillStyle(4000); // 0% transparent | |
4736 | ||
4737 | TGeoVolume *traySideCIntWall = new TGeoVolume("ITSsuppSPDTraySideCWall", | |
4738 | intWall, medAl); | |
4739 | ||
4740 | traySideCIntWall->SetVisibility(kTRUE); | |
4741 | traySideCIntWall->SetLineColor(6); // Purple | |
4742 | traySideCIntWall->SetLineWidth(1); | |
4743 | traySideCIntWall->SetFillColor(traySideCIntWall->GetLineColor()); | |
4744 | traySideCIntWall->SetFillStyle(4000); // 0% transparent | |
4745 | ||
4746 | TGeoVolume *traySideCHorTube = new TGeoVolume("ITSsuppSPDTraySideCHorTube", | |
4747 | horTube, medIn); | |
4748 | ||
4749 | traySideCHorTube->SetVisibility(kTRUE); | |
4750 | traySideCHorTube->SetLineColor(kGray); // as in GeometrySPD | |
4751 | traySideCHorTube->SetLineWidth(1); | |
4752 | traySideCHorTube->SetFillColor(traySideCHorTube->GetLineColor()); | |
4753 | traySideCHorTube->SetFillStyle(4000); // 0% transparent | |
4754 | ||
96eb8210 | 4755 | TGeoVolume *traySideCHorFreon = new TGeoVolume("ITSsuppSPDTraySideCHorFreon", |
4756 | horFreon, medFr); | |
4757 | ||
4758 | traySideCHorFreon->SetVisibility(kTRUE); | |
4759 | traySideCHorFreon->SetLineColor(kBlue); // Blue | |
4760 | traySideCHorFreon->SetLineWidth(1); | |
4761 | traySideCHorFreon->SetFillColor(traySideCHorFreon->GetLineColor()); | |
4762 | traySideCHorFreon->SetFillStyle(4000); // 0% transparent | |
4763 | ||
aa177c73 | 4764 | TGeoVolume *traySideCIncTube = new TGeoVolume("ITSsuppSPDTraySideCIncTube", |
4765 | incTube, medIn); | |
4766 | ||
4767 | traySideCIncTube->SetVisibility(kTRUE); | |
4768 | traySideCIncTube->SetLineColor(kGray); // as in GeometrySPD | |
4769 | traySideCIncTube->SetLineWidth(1); | |
4770 | traySideCIncTube->SetFillColor(traySideCIncTube->GetLineColor()); | |
4771 | traySideCIncTube->SetFillStyle(4000); // 0% transparent | |
4772 | ||
96eb8210 | 4773 | TGeoVolume *traySideCIncFreon = new TGeoVolume("ITSsuppSPDTraySideCIncFreon", |
4774 | incFreon, medFr); | |
4775 | ||
4776 | traySideCIncFreon->SetVisibility(kTRUE); | |
4777 | traySideCIncFreon->SetLineColor(kBlue); // Blue | |
4778 | traySideCIncFreon->SetLineWidth(1); | |
4779 | traySideCIncFreon->SetFillColor(traySideCIncFreon->GetLineColor()); | |
4780 | traySideCIncFreon->SetFillStyle(4000); // 0% transparent | |
4781 | ||
1c5895a3 | 4782 | TGeoVolume *traySideCOutTube = new TGeoVolume("ITSsuppSPDTraySideCOutTube", |
4783 | outTube, medIn); | |
4784 | ||
4785 | traySideCOutTube->SetVisibility(kTRUE); | |
4786 | traySideCOutTube->SetLineColor(kGray); // as in GeometrySPD | |
4787 | traySideCOutTube->SetLineWidth(1); | |
4788 | traySideCOutTube->SetFillColor(traySideCOutTube->GetLineColor()); | |
4789 | traySideCOutTube->SetFillStyle(4000); // 0% transparent | |
4790 | ||
4791 | TGeoVolume *traySideCOutFreon = new TGeoVolume("ITSsuppSPDTraySideCOutFreon", | |
4792 | outFreon, medFr); | |
4793 | ||
4794 | traySideCOutFreon->SetVisibility(kTRUE); | |
4795 | traySideCOutFreon->SetLineColor(kBlue); // Blue | |
4796 | traySideCOutFreon->SetLineWidth(1); | |
4797 | traySideCOutFreon->SetFillColor(traySideCOutFreon->GetLineColor()); | |
4798 | traySideCOutFreon->SetFillStyle(4000); // 0% transparent | |
4799 | ||
aa177c73 | 4800 | TGeoVolume *traySideCOptFibs = new TGeoVolume("ITSsuppSPDTraySideCOptFibs", |
4801 | optFibs, medFibs); | |
4802 | ||
4803 | traySideCOptFibs->SetVisibility(kTRUE); | |
4804 | traySideCOptFibs->SetLineColor(kOrange); // Orange | |
4805 | traySideCOptFibs->SetLineWidth(1); | |
4806 | traySideCOptFibs->SetFillColor(traySideCOptFibs->GetLineColor()); | |
4807 | traySideCOptFibs->SetFillStyle(4000); // 0% transparent | |
4808 | ||
57126ea1 | 4809 | TGeoVolume *traySideCLowCabsCu = new TGeoVolume("ITSsuppSPDTraySideCLVCu", |
4810 | lowCablesCu, medCu); | |
4811 | ||
4812 | traySideCLowCabsCu->SetVisibility(kTRUE); | |
4813 | traySideCLowCabsCu->SetLineColor(kRed); // Red | |
4814 | traySideCLowCabsCu->SetLineWidth(1); | |
4815 | traySideCLowCabsCu->SetFillColor(traySideCLowCabsCu->GetLineColor()); | |
4816 | traySideCLowCabsCu->SetFillStyle(4000); // 0% transparent | |
4817 | ||
4818 | TGeoVolume *traySideCLowCabsPUR = new TGeoVolume("ITSsuppSPDTraySideCLVPUR", | |
4819 | lowCablesPUR, medPUR); | |
4820 | ||
4821 | traySideCLowCabsPUR->SetVisibility(kTRUE); | |
4822 | traySideCLowCabsPUR->SetLineColor(kBlack); // Black | |
4823 | traySideCLowCabsPUR->SetLineWidth(1); | |
4824 | traySideCLowCabsPUR->SetFillColor(traySideCLowCabsPUR->GetLineColor()); | |
4825 | traySideCLowCabsPUR->SetFillStyle(4000); // 0% transparent | |
aa177c73 | 4826 | |
57126ea1 | 4827 | TGeoVolume *traySideCHiCabsCu = new TGeoVolume("ITSsuppSPDTraySideCHVCu", |
4828 | hiCablesCu, medCu); | |
aa177c73 | 4829 | |
57126ea1 | 4830 | traySideCHiCabsCu->SetVisibility(kTRUE); |
4831 | traySideCHiCabsCu->SetLineColor(kRed); // Red | |
4832 | traySideCHiCabsCu->SetLineWidth(1); | |
4833 | traySideCHiCabsCu->SetFillColor(traySideCHiCabsCu->GetLineColor()); | |
4834 | traySideCHiCabsCu->SetFillStyle(4000); // 0% transparent | |
96eb8210 | 4835 | |
57126ea1 | 4836 | TGeoVolume *traySideCHiCabsPUR = new TGeoVolume("ITSsuppSPDTraySideCHVPUR", |
4837 | hiCablesPUR, medPUR); | |
4838 | ||
4839 | traySideCHiCabsPUR->SetVisibility(kTRUE); | |
4840 | traySideCHiCabsPUR->SetLineColor(kBlack); // Black | |
4841 | traySideCHiCabsPUR->SetLineWidth(1); | |
4842 | traySideCHiCabsPUR->SetFillColor(traySideCHiCabsPUR->GetLineColor()); | |
4843 | traySideCHiCabsPUR->SetFillStyle(4000); // 0% transparent | |
4844 | ||
4845 | TGeoVolume *traySideCCoaxCu = new TGeoVolume("ITSsuppSPDTraySideCCoaxCu", | |
4846 | coaxCablesCu, medCu); | |
4847 | ||
4848 | traySideCCoaxCu->SetVisibility(kTRUE); | |
4849 | traySideCCoaxCu->SetLineColor(kRed); // Red | |
4850 | traySideCCoaxCu->SetLineWidth(1); | |
4851 | traySideCCoaxCu->SetFillColor(traySideCCoaxCu->GetLineColor()); | |
4852 | traySideCCoaxCu->SetFillStyle(4000); // 0% transparent | |
4853 | ||
d8826f33 | 4854 | TGeoVolume *traySideCCoaxMeg = new TGeoVolume("ITSsuppSPDTraySideCCoaxMeg", |
4855 | coaxCablesMeg, medMeg); | |
57126ea1 | 4856 | |
d8826f33 | 4857 | traySideCCoaxMeg->SetVisibility(kTRUE); |
4858 | traySideCCoaxMeg->SetLineColor(kBlack); // Black | |
4859 | traySideCCoaxMeg->SetLineWidth(1); | |
4860 | traySideCCoaxMeg->SetFillColor(traySideCCoaxMeg->GetLineColor()); | |
4861 | traySideCCoaxMeg->SetFillStyle(4000); // 0% transparent | |
96eb8210 | 4862 | |
aa177c73 | 4863 | |
4864 | // Now build up the trays | |
4865 | cableTrayC->AddNode(traySideCHorFace,1,0); | |
4866 | ||
4867 | cableTrayC->AddNode(traySideCMidFace,1,0); | |
4868 | ||
4869 | zloc = kTrayCHalfWide - kTrayCThick; | |
4870 | cableTrayC->AddNode(traySideCSideFace, 1, | |
4871 | new TGeoTranslation( 0, 0, zloc)); | |
4872 | zloc = -kTrayCHalfWide; | |
4873 | cableTrayC->AddNode(traySideCSideFace, 2, | |
4874 | new TGeoTranslation( 0, 0, zloc)); | |
4875 | ||
4876 | xloc = sideCShortCover->GetDX(); | |
4877 | yloc = kTrayCFirstHigh - sideCShortCover->GetDY(); | |
4878 | cableTrayC->AddNode(traySideCShortCover, 1, | |
4879 | new TGeoTranslation( xloc, yloc, 0)); | |
4880 | ||
4881 | cableTrayC->AddNode(traySideCLongCover,1,0); | |
4882 | ||
4883 | cableTrayC->AddNode(traySideCIntWall,1,0); | |
4884 | ||
96eb8210 | 4885 | traySideCHorTube->AddNode(traySideCHorFreon, 1, 0); |
4886 | traySideCIncTube->AddNode(traySideCIncFreon, 1, 0); | |
1c5895a3 | 4887 | traySideCOutTube->AddNode(traySideCOutFreon, 1, 0); |
96eb8210 | 4888 | |
aa177c73 | 4889 | xloc = horTube->GetDz(); |
4890 | yloc = sideCMidFace->GetY(5) + horTube->GetRmax(); | |
4891 | cableTrayC->AddNode(traySideCHorTube, 1, | |
4892 | new TGeoCombiTrans( xloc, yloc, 0, | |
4893 | new TGeoRotation("",-90.,-90.,90.))); | |
4894 | ||
4895 | xloc = sideCMidFace->GetX(4) + (incTube->GetDz())*CosD(kTrayCFoldAngle); | |
4896 | yloc = sideCMidFace->GetY(4) + incTube->GetRmax() + | |
4897 | (incTube->GetDz())*SinD(kTrayCFoldAngle)+0.005;//Avoid small ovrlp | |
4898 | cableTrayC->AddNode(traySideCIncTube, 1, | |
4899 | new TGeoCombiTrans( xloc, yloc, 0, | |
4900 | new TGeoRotation("",-90.+kTrayCFoldAngle,-90.,90.))); | |
4901 | ||
1c5895a3 | 4902 | xloc = -kTrayCCablesZLenOut/2 - outTube->GetRmax(); |
4903 | yloc = xloc/TanD(kTrayCCablesOutRot) + sideCMidFace->GetY(4) - | |
4904 | 2*outTube->GetRmax(); | |
4905 | cableTrayC->AddNode(traySideCOutTube, 1, | |
4906 | new TGeoCombiTrans( xloc, yloc, 0, | |
4907 | new TGeoRotation("",-70.,-90.,90.))); | |
4908 | ||
aa177c73 | 4909 | zloc = horTube->GetRmax(); |
4910 | cableTrayC->AddNode(traySideCOptFibs, 1, | |
4911 | new TGeoTranslation( 0, 0, zloc)); | |
4912 | ||
57126ea1 | 4913 | zloc = kLowVoltCableSectCu + horTube->GetRmax(); |
4914 | cableTrayC->AddNode(traySideCLowCabsCu, 1, | |
4915 | new TGeoTranslation( 0, 0,-zloc)); | |
4916 | cableTrayC->AddNode(traySideCLowCabsPUR, 1, | |
aa177c73 | 4917 | new TGeoTranslation( 0, 0,-zloc)); |
4918 | ||
57126ea1 | 4919 | zloc = kHiVoltCableSectCu + kLowVoltCableSectCu + horTube->GetRmax(); |
4920 | cableTrayC->AddNode(traySideCHiCabsCu, 1, | |
4921 | new TGeoTranslation( 0, 0,-zloc)); | |
4922 | cableTrayC->AddNode(traySideCHiCabsPUR, 1, | |
96eb8210 | 4923 | new TGeoTranslation( 0, 0,-zloc)); |
4924 | ||
57126ea1 | 4925 | zloc = kOpticalFibersSect + kCoaxCableSectCu + horTube->GetRmax(); |
4926 | cableTrayC->AddNode(traySideCCoaxCu, 1, | |
4927 | new TGeoTranslation( 0, 0, zloc)); | |
d8826f33 | 4928 | cableTrayC->AddNode(traySideCCoaxMeg, 1, |
57126ea1 | 4929 | new TGeoTranslation( 0, 0, zloc)); |
4930 | ||
aa177c73 | 4931 | |
4932 | // Finally put everything in the mother volume | |
4933 | for (Int_t jt = 0; jt < kNumTraysSideC/2; jt++) { | |
4934 | alpharot = kTraySideCAlphaRot[jt]; | |
4935 | ||
4936 | xloc = kTraySideCRPos*SinD(alpharot); | |
4937 | yloc = kTraySideCRPos*CosD(alpharot); | |
4938 | moth->AddNode(cableTrayC,2*jt+1, | |
4939 | new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos, | |
4940 | new TGeoRotation("",-90.+alpharot,-90.,90.+kTrayCFoldAngle))); | |
4941 | alpharot += 180; | |
4942 | xloc = kTraySideCRPos*SinD(alpharot); | |
4943 | yloc = kTraySideCRPos*CosD(alpharot); | |
4944 | moth->AddNode(cableTrayC,2*jt+2, | |
4945 | new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos, | |
4946 | new TGeoRotation("",-90.+alpharot,-90.,90.+kTrayCFoldAngle))); | |
4947 | } | |
4948 | ||
4949 | ||
4950 | return; | |
4951 | } | |
4952 | ||
798b4e0c | 4953 | //______________________________________________________________________ |
4954 | void AliITSv11GeometrySupport::SDDCableTraysSideA(TGeoVolume *moth, | |
4955 | TGeoManager *mgr){ | |
4956 | // | |
4957 | // Creates the SDD cable trays which are outside the ITS support cones | |
4958 | // but still inside the TPC on Side A | |
4959 | // (part of this code is taken or anyway inspired to ServicesCableSupport | |
4960 | // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
4961 | // | |
4962 | // Input: | |
4963 | // moth : the TGeoVolume owing the volume structure | |
4964 | // mgr : the GeoManager (default gGeoManager) | |
4965 | // Output: | |
4966 | // | |
4967 | // Created: ??? Bjorn S. Nilsen | |
4968 | // Updated: 5 Jan 2010 Mario Sitta | |
4969 | // Updated: 26 Feb 2010 Mario Sitta | |
57126ea1 | 4970 | // Updated: 06 Sep 2010 Mario Sitta |
798b4e0c | 4971 | // |
4972 | // Technical data are taken from AutoCAD drawings, L.Simonetti technical | |
4973 | // drawings and other (oral) information given by F.Tosello | |
4974 | // | |
4975 | ||
4976 | // Overall position and rotation of the A-Side Cable Trays | |
4977 | // (parts of 0872/G/D) | |
573a206f | 4978 | const Double_t kTrayARTrans = 408.35 *fgkmm; |
798b4e0c | 4979 | const Double_t kTrayAZTrans = 1011.00 *fgkmm; |
4980 | const Double_t kTrayAZToSupportRing = 435.00 *fgkmm; | |
57126ea1 | 4981 | const Double_t kExternTrayYTrans = 96.00 *fgkmm; // Computed |
4982 | const Double_t kExternTrayZTrans = 823.00 *fgkmm; | |
798b4e0c | 4983 | const Double_t kExternCoverYTrans = 2.00 *fgkmm; |
4984 | const Double_t kTrayAZRot = (180-169.5);// Degrees | |
4985 | const Double_t kTrayAFirstRotAng = 22.00; // Degrees | |
4986 | const Double_t kTrayASecondRotAng = 15.00; // Degrees | |
4987 | ||
57126ea1 | 4988 | const Double_t kForwardTrayThick = 2.00 *fgkmm; |
798b4e0c | 4989 | const Double_t kForwardTrayTailHeight = 100.00 *fgkmm; // Computed |
4990 | const Double_t kForwardTrayTotalHeight = 170.00 *fgkmm; // Computed | |
4991 | const Double_t kForwardTrayUpperLength = 405.00 *fgkmm; // Computed | |
4992 | const Double_t kForwardCoverLength = 380.00 *fgkmm; | |
4993 | const Double_t kForwardCoverWide = 133.00 *fgkmm; | |
4994 | const Double_t kForwardCoverHeight = 10.00 *fgkmm; | |
4995 | const Double_t kForwardCoverThick = 1.00 *fgkmm; | |
4996 | ||
4997 | const Double_t kExternTrayTotalLen = 1200.00 *fgkmm; | |
4998 | const Double_t kExternTrayTotalHeight = 52.00 *fgkmm; | |
4999 | const Double_t kExternCoverLen = kExternTrayTotalLen; | |
5000 | const Double_t kExternCoverThick = 5.00 *fgkmm; | |
5001 | const Double_t kExternCoverSideThick = 3.00 *fgkmm; | |
5002 | ||
5003 | const Int_t kForwardTrayNpoints = 8; | |
5004 | ||
57126ea1 | 5005 | // Dimensions and positions of the Cable Tray elements |
5006 | const Double_t kSideACoolManifWide = 8.23 *fgkcm; | |
5007 | const Double_t kSideACoolManifHigh = 8.06 *fgkcm; | |
5008 | const Double_t kSideACoolManifLen = 3.90 *fgkcm; | |
5009 | const Double_t kSideACoolManifPOMFrac = 0.0054; | |
5010 | const Double_t kSideACoolManifSteelFrac= 0.8850; | |
5011 | const Double_t kSideACoolManifWaterFrac= 0.0913; | |
5012 | const Double_t kSideACoolManifAlFrac = 0.0183; | |
5013 | ||
5014 | const Double_t kSideACoolTubesWide = 9.07 *fgkcm; | |
5015 | const Double_t kSideACoolTubesHigh = 1.88 *fgkcm; | |
5016 | const Double_t kSideACoolTubesTrans = 0.88 *fgkcm; | |
5017 | const Double_t kSideACoolTubesPURFrac = 0.5897; | |
5018 | const Double_t kSideACoolTubesWaterFrac= 0.4101; | |
5019 | const Double_t kSideACoolTubesAirFrac = 0.0002; | |
5020 | ||
5021 | const Double_t kSideAOptConnWide = 0.90 *fgkcm; | |
5022 | const Double_t kSideAOptConnLen = 1.37 *fgkcm; | |
5023 | const Double_t kSideAOptConnPBTFrac = 0.5010; | |
5024 | const Double_t kSideAOptConnSteelFrac = 0.1784; | |
5025 | const Double_t kSideAOptConnAlFrac = 0.3206; | |
5026 | ||
5027 | const Double_t kSideAOptFibsWide = 0.71 *fgkcm; | |
5028 | const Double_t kSideAOptFibsHigh = 3.20 *fgkcm; | |
5029 | ||
5030 | const Double_t kSideAInputCablesWide = 12.50 *fgkcm; | |
5031 | const Double_t kSideAInputCablesHigh = 1.24 *fgkcm; | |
5032 | const Double_t kSideAInputCablesLen = 25.20 *fgkcm; | |
5033 | const Double_t kSideAInputCablesYTrans = 1.15 *fgkcm; | |
5034 | const Double_t kSideAInputCablesCu = 0.7404; | |
5035 | const Double_t kSideAInputCablesPlast = 0.1269; | |
5036 | const Double_t kSideAInputCablesAl = 0.0057; | |
5037 | const Double_t kSideAInputCablesKapton = 0.0172; | |
5038 | const Double_t kSideAInputCablesPOLYAX = 0.1098; | |
5039 | ||
5040 | const Double_t kSideAOutputCablesWide = 8.30 *fgkcm; | |
5041 | const Double_t kSideAOutputCablesHigh = 1.56 *fgkcm; | |
5042 | const Double_t kSideAOutputCablesCu = 0.6783; | |
5043 | const Double_t kSideAOutputCablesPlast = 0.1605; | |
5044 | const Double_t kSideAOutputCablesAl = 0.0078; | |
5045 | const Double_t kSideAOutputCablesKapton= 0.0232; | |
5046 | const Double_t kSideAOutputCablesPOLYAX= 0.1302; | |
5047 | ||
5048 | const Double_t kSideAPCBBoardsWide = 12.50 *fgkcm; | |
5049 | const Double_t kSideAPCBBoardsHigh = 6.32 *fgkcm; | |
5050 | const Double_t kSideAPCBBoardsLen = 24.00 *fgkcm; | |
5051 | const Double_t kSideAPCBBoardsYTrans = 0.75 *fgkcm; | |
5052 | const Double_t kSideAPCBBoardsCu = 0.3864; | |
5053 | const Double_t kSideAPCBBoardsEpoxy = 0.1486; | |
5054 | const Double_t kSideAPCBBoardsPlast = 0.0578; | |
5055 | const Double_t kSideAPCBBoardsSteel = 0.1521; | |
5056 | const Double_t kSideAPCBBoardsPPS = 0.2551; | |
5057 | ||
798b4e0c | 5058 | |
5059 | // Local variables | |
5060 | Double_t xprof[kForwardTrayNpoints], yprof[kForwardTrayNpoints]; | |
57126ea1 | 5061 | Double_t xloc, yloc, zloc, alpharot, height; |
798b4e0c | 5062 | |
5063 | ||
5064 | // The whole tray as an assembly | |
5065 | TGeoVolumeAssembly *cableTrayA = new TGeoVolumeAssembly("ITSsupportSDDTrayA"); | |
5066 | ||
5067 | ||
5068 | // First create all needed shapes | |
5069 | ||
5070 | // The forward tray is very complex and deserves a dedicated method | |
57126ea1 | 5071 | CreateSDDForwardTraySideA(cableTrayA,mgr); |
798b4e0c | 5072 | |
5073 | // The forward cover: a Xtru | |
5074 | TGeoXtru *forwardCover = new TGeoXtru(2); | |
5075 | forwardCover->SetName("ITSsuppSDDForwCover"); | |
5076 | ||
5077 | xprof[0] = kForwardCoverWide/2; | |
5078 | yprof[0] = kForwardCoverHeight; | |
5079 | xprof[1] = xprof[0]; | |
5080 | yprof[1] = 0; | |
5081 | xprof[2] = xprof[1] - kForwardCoverThick; | |
5082 | yprof[2] = yprof[1]; | |
5083 | xprof[3] = xprof[2]; | |
5084 | yprof[3] = yprof[0] - kForwardCoverThick; | |
5085 | ||
5086 | // We did the right side, now reflex on the left side | |
5087 | for (Int_t jp = 0; jp < 4; jp++) { | |
5088 | xprof[4+jp] = -xprof[3-jp]; | |
5089 | yprof[4+jp] = yprof[3-jp]; | |
5090 | } | |
5091 | ||
5092 | forwardCover->DefinePolygon(8, xprof, yprof); | |
5093 | forwardCover->DefineSection(0, 0); | |
5094 | forwardCover->DefineSection(1, kForwardCoverLength); | |
5095 | ||
5096 | // The external tray (as 0872/G/D/03): a Xtru | |
5097 | TGeoXtru *externalTray = CreateSDDSSDTraysSideA(kExternTrayTotalLen, | |
5098 | kExternTrayTotalHeight); | |
5099 | ||
5100 | // The external covers: a Composite Shape | |
5101 | TGeoCompositeShape *externCover = CreateTrayAExternalCover(kExternCoverLen); | |
5102 | ||
57126ea1 | 5103 | // Now the volumes inside it |
5104 | // The cooling manifold: four boxes | |
5105 | TGeoBBox *coolManifPOM = new TGeoBBox(kSideACoolManifWide/2, | |
5106 | kSideACoolManifPOMFrac*kSideACoolManifHigh/2, | |
5107 | kSideACoolManifLen/2); | |
5108 | ||
5109 | TGeoBBox *coolManifSteel = new TGeoBBox(kSideACoolManifWide/2, | |
5110 | kSideACoolManifSteelFrac*kSideACoolManifHigh/2, | |
5111 | kSideACoolManifLen/2); | |
5112 | ||
5113 | TGeoBBox *coolManifWater = new TGeoBBox(kSideACoolManifWide/2, | |
5114 | kSideACoolManifWaterFrac*kSideACoolManifHigh/2, | |
5115 | kSideACoolManifLen/2); | |
5116 | ||
5117 | TGeoBBox *coolManifAl = new TGeoBBox(kSideACoolManifWide/2, | |
5118 | kSideACoolManifAlFrac*kSideACoolManifHigh/2, | |
5119 | kSideACoolManifLen/2); | |
5120 | ||
5121 | // The cooling tubes: three Xtru's | |
5122 | TGeoXtru *coolTubesPUR = new TGeoXtru(2); | |
5123 | ||
5124 | height = kSideACoolTubesHigh*kSideACoolTubesPURFrac; | |
5125 | ||
5126 | xprof[0] = kSideACoolManifLen; | |
5127 | yprof[0] = kForwardTrayThick + kSideACoolTubesTrans; | |
5128 | xprof[2] = kExternTrayZTrans + kForwardTrayTotalHeight*SinD(kTrayAZRot) + | |
5129 | kExternTrayTotalLen*CosD(kTrayAZRot) - xprof[0]/2; | |
5130 | yprof[2] = kForwardTrayTotalHeight*(1 - CosD(kTrayAZRot)) + | |
5131 | kExternTrayYTrans - kExternTrayTotalHeight*CosD(kTrayAZRot) + | |
5132 | kExternTrayTotalLen*SinD(kTrayAZRot) + yprof[0]; | |
5133 | IntersectLines( 0 , xprof[0], yprof[0], | |
5134 | TanD(kTrayAZRot), xprof[2], yprof[2], | |
5135 | xprof[1], yprof[1]); | |
5136 | xprof[3] = xprof[2] - height*SinD(kTrayAZRot); | |
5137 | yprof[3] = yprof[2] + height*CosD(kTrayAZRot); | |
5138 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5139 | height, xprof[4], yprof[4]); | |
5140 | xprof[5] = xprof[0]; | |
5141 | yprof[5] = yprof[0] + height; | |
5142 | ||
5143 | coolTubesPUR->DefinePolygon(6, xprof, yprof); | |
5144 | coolTubesPUR->DefineSection(0,-kSideACoolTubesWide/2); | |
5145 | coolTubesPUR->DefineSection(1, kSideACoolTubesWide/2); | |
5146 | ||
5147 | TGeoXtru *coolTubesWater = new TGeoXtru(2); | |
5148 | ||
5149 | height = kSideACoolTubesHigh*kSideACoolTubesWaterFrac; | |
5150 | ||
5151 | xprof[0] = coolTubesPUR->GetX(5); | |
5152 | yprof[0] = coolTubesPUR->GetY(5); | |
5153 | xprof[1] = coolTubesPUR->GetX(4); | |
5154 | yprof[1] = coolTubesPUR->GetY(4); | |
5155 | xprof[2] = coolTubesPUR->GetX(3); | |
5156 | yprof[2] = coolTubesPUR->GetY(3); | |
5157 | xprof[3] = xprof[2] - height*SinD(kTrayAZRot); | |
5158 | yprof[3] = yprof[2] + height*CosD(kTrayAZRot); | |
5159 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5160 | height, xprof[4], yprof[4]); | |
5161 | xprof[5] = xprof[0]; | |
5162 | yprof[5] = yprof[0] + height; | |
5163 | ||
5164 | coolTubesWater->DefinePolygon(6, xprof, yprof); | |
5165 | coolTubesWater->DefineSection(0,-kSideACoolTubesWide/2); | |
5166 | coolTubesWater->DefineSection(1, kSideACoolTubesWide/2); | |
5167 | ||
5168 | TGeoXtru *coolTubesAir = new TGeoXtru(2); | |
5169 | ||
5170 | height = kSideACoolTubesHigh*kSideACoolTubesAirFrac; | |
5171 | ||
5172 | xprof[0] = coolTubesWater->GetX(5); | |
5173 | yprof[0] = coolTubesWater->GetY(5); | |
5174 | xprof[1] = coolTubesWater->GetX(4); | |
5175 | yprof[1] = coolTubesWater->GetY(4); | |
5176 | xprof[2] = coolTubesWater->GetX(3); | |
5177 | yprof[2] = coolTubesWater->GetY(3); | |
5178 | xprof[3] = xprof[2] - height*SinD(kTrayAZRot); | |
5179 | yprof[3] = yprof[2] + height*CosD(kTrayAZRot); | |
5180 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5181 | height, xprof[4], yprof[4]); | |
5182 | xprof[5] = xprof[0]; | |
5183 | yprof[5] = yprof[0] + height; | |
5184 | ||
5185 | coolTubesAir->DefinePolygon(6, xprof, yprof); | |
5186 | coolTubesAir->DefineSection(0,-kSideACoolTubesWide/2); | |
5187 | coolTubesAir->DefineSection(1, kSideACoolTubesWide/2); | |
5188 | ||
5189 | // The optical fiber connectors: three boxes | |
5190 | TGeoBBox *optConnPBT = new TGeoBBox(kSideAOptConnWide/2, | |
5191 | kSideAOptConnPBTFrac*kSideACoolManifHigh/2, | |
5192 | kSideAOptConnLen/2); | |
5193 | ||
5194 | TGeoBBox *optConnSteel = new TGeoBBox(kSideAOptConnWide/2, | |
5195 | kSideAOptConnSteelFrac*kSideACoolManifHigh/2, | |
5196 | kSideAOptConnLen/2); | |
5197 | ||
5198 | TGeoBBox *optConnAl = new TGeoBBox(kSideAOptConnWide/2, | |
5199 | kSideAOptConnAlFrac*kSideACoolManifHigh/2, | |
5200 | kSideAOptConnLen/2); | |
5201 | ||
5202 | // The optical fibers: a Xtru | |
5203 | TGeoXtru *opticalFibs = new TGeoXtru(2); | |
5204 | ||
5205 | xprof[0] = kSideAOptConnLen; | |
5206 | yprof[0] = coolTubesPUR->GetY(0); | |
5207 | xprof[1] = coolTubesPUR->GetX(1); | |
5208 | yprof[1] = coolTubesPUR->GetY(1); | |
5209 | xprof[2] = coolTubesPUR->GetX(2); | |
5210 | yprof[2] = coolTubesPUR->GetY(2); | |
5211 | xprof[3] = xprof[2] - kSideAOptFibsHigh*SinD(kTrayAZRot); | |
5212 | yprof[3] = yprof[2] + kSideAOptFibsHigh*CosD(kTrayAZRot); | |
5213 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5214 | kSideAOptFibsHigh, xprof[4], yprof[4]); | |
5215 | xprof[5] = xprof[0]; | |
5216 | yprof[5] = yprof[0] + kSideAOptFibsHigh; | |
5217 | ||
5218 | opticalFibs->DefinePolygon(6, xprof, yprof); | |
5219 | opticalFibs->DefineSection(0,-kSideAOptFibsWide/2); | |
5220 | opticalFibs->DefineSection(1, kSideAOptFibsWide/2); | |
5221 | ||
5222 | // The input cables: five boxes | |
5223 | TGeoBBox *inputCabsCu = new TGeoBBox(kSideAInputCablesWide/2, | |
5224 | kSideAInputCablesCu*kSideAInputCablesHigh/2, | |
5225 | kSideAInputCablesLen/2); | |
5226 | ||
5227 | TGeoBBox *inputCabsPlast = new TGeoBBox(kSideAInputCablesWide/2, | |
5228 | kSideAInputCablesPlast*kSideAInputCablesHigh/2, | |
5229 | kSideAInputCablesLen/2); | |
5230 | ||
5231 | TGeoBBox *inputCabsAl = new TGeoBBox(kSideAInputCablesWide/2, | |
5232 | kSideAInputCablesAl*kSideAInputCablesHigh/2, | |
5233 | kSideAInputCablesLen/2); | |
5234 | ||
5235 | TGeoBBox *inputCabsKapton = new TGeoBBox(kSideAInputCablesWide/2, | |
5236 | kSideAInputCablesKapton*kSideAInputCablesHigh/2, | |
5237 | kSideAInputCablesLen/2); | |
5238 | ||
5239 | TGeoBBox *inputCabsPOLYAX = new TGeoBBox(kSideAInputCablesWide/2, | |
5240 | kSideAInputCablesPOLYAX*kSideAInputCablesHigh/2, | |
5241 | kSideAInputCablesLen/2); | |
5242 | ||
5243 | // The output cables: five Xtru | |
5244 | TGeoXtru *outputCabsCu = new TGeoXtru(2); | |
5245 | ||
5246 | height = kSideAOutputCablesCu*kSideAOutputCablesHigh; | |
5247 | ||
5248 | xprof[0] = kSideAInputCablesLen/2 + kSideAPCBBoardsLen/2; | |
5249 | yprof[0] = coolTubesAir->GetY(5); | |
5250 | xprof[1] = coolTubesAir->GetX(4); | |
5251 | yprof[1] = coolTubesAir->GetY(4); | |
5252 | xprof[2] = coolTubesAir->GetX(3); | |
5253 | yprof[2] = coolTubesAir->GetY(3); | |
5254 | xprof[3] = xprof[2] - height*SinD(kTrayAZRot); | |
5255 | yprof[3] = yprof[2] + height*CosD(kTrayAZRot); | |
5256 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5257 | height, xprof[4], yprof[4]); | |
5258 | xprof[5] = xprof[0]; | |
5259 | yprof[5] = yprof[0] + height; | |
5260 | ||
5261 | outputCabsCu->DefinePolygon(6, xprof, yprof); | |
5262 | outputCabsCu->DefineSection(0,-kSideAOutputCablesWide/2); | |
5263 | outputCabsCu->DefineSection(1, kSideAOutputCablesWide/2); | |
5264 | ||
5265 | TGeoXtru *outputCabsPlast = new TGeoXtru(2); | |
5266 | ||
5267 | height = kSideAOutputCablesPlast*kSideAOutputCablesHigh; | |
5268 | ||
5269 | xprof[0] = outputCabsCu->GetX(5); | |
5270 | yprof[0] = outputCabsCu->GetY(5); | |
5271 | xprof[1] = outputCabsCu->GetX(4); | |
5272 | yprof[1] = outputCabsCu->GetY(4); | |
5273 | xprof[2] = outputCabsCu->GetX(3); | |
5274 | yprof[2] = outputCabsCu->GetY(3); | |
5275 | xprof[3] = xprof[2] - height*SinD(kTrayAZRot); | |
5276 | yprof[3] = yprof[2] + height*CosD(kTrayAZRot); | |
5277 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5278 | height, xprof[4], yprof[4]); | |
5279 | xprof[5] = xprof[0]; | |
5280 | yprof[5] = yprof[0] + height; | |
5281 | ||
5282 | outputCabsPlast->DefinePolygon(6, xprof, yprof); | |
5283 | outputCabsPlast->DefineSection(0,-kSideAOutputCablesWide/2); | |
5284 | outputCabsPlast->DefineSection(1, kSideAOutputCablesWide/2); | |
5285 | ||
5286 | TGeoXtru *outputCabsAl = new TGeoXtru(2); | |
5287 | ||
5288 | height = kSideAOutputCablesAl*kSideAOutputCablesHigh; | |
5289 | ||
5290 | xprof[0] = outputCabsPlast->GetX(5); | |
5291 | yprof[0] = outputCabsPlast->GetY(5); | |
5292 | xprof[1] = outputCabsPlast->GetX(4); | |
5293 | yprof[1] = outputCabsPlast->GetY(4); | |
5294 | xprof[2] = outputCabsPlast->GetX(3); | |
5295 | yprof[2] = outputCabsPlast->GetY(3); | |
5296 | xprof[3] = xprof[2] - height*SinD(kTrayAZRot); | |
5297 | yprof[3] = yprof[2] + height*CosD(kTrayAZRot); | |
5298 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5299 | height, xprof[4], yprof[4]); | |
5300 | xprof[5] = xprof[0]; | |
5301 | yprof[5] = yprof[0] + height; | |
5302 | ||
5303 | outputCabsAl->DefinePolygon(6, xprof, yprof); | |
5304 | outputCabsAl->DefineSection(0,-kSideAOutputCablesWide/2); | |
5305 | outputCabsAl->DefineSection(1, kSideAOutputCablesWide/2); | |
5306 | ||
5307 | TGeoXtru *outputCabsKapton = new TGeoXtru(2); | |
5308 | ||
5309 | height = kSideAOutputCablesKapton*kSideAOutputCablesHigh; | |
5310 | ||
5311 | xprof[0] = outputCabsAl->GetX(5); | |
5312 | yprof[0] = outputCabsAl->GetY(5); | |
5313 | xprof[1] = outputCabsAl->GetX(4); | |
5314 | yprof[1] = outputCabsAl->GetY(4); | |
5315 | xprof[2] = outputCabsAl->GetX(3); | |
5316 | yprof[2] = outputCabsAl->GetY(3); | |
5317 | xprof[3] = xprof[2] - height*SinD(kTrayAZRot); | |
5318 | yprof[3] = yprof[2] + height*CosD(kTrayAZRot); | |
5319 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5320 | height, xprof[4], yprof[4]); | |
5321 | xprof[5] = xprof[0]; | |
5322 | yprof[5] = yprof[0] + height; | |
5323 | ||
5324 | outputCabsKapton->DefinePolygon(6, xprof, yprof); | |
5325 | outputCabsKapton->DefineSection(0,-kSideAOutputCablesWide/2); | |
5326 | outputCabsKapton->DefineSection(1, kSideAOutputCablesWide/2); | |
5327 | ||
5328 | TGeoXtru *outputCabsPOLYAX = new TGeoXtru(2); | |
5329 | ||
5330 | height = kSideAOutputCablesPOLYAX*kSideAOutputCablesHigh; | |
5331 | ||
5332 | xprof[0] = outputCabsKapton->GetX(5); | |
5333 | yprof[0] = outputCabsKapton->GetY(5); | |
5334 | xprof[1] = outputCabsKapton->GetX(4); | |
5335 | yprof[1] = outputCabsKapton->GetY(4); | |
5336 | xprof[2] = outputCabsKapton->GetX(3); | |
5337 | yprof[2] = outputCabsKapton->GetY(3); | |
5338 | xprof[3] = xprof[2] - height*SinD(kTrayAZRot); | |
5339 | yprof[3] = yprof[2] + height*CosD(kTrayAZRot); | |
5340 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5341 | height, xprof[4], yprof[4]); | |
5342 | xprof[5] = xprof[0]; | |
5343 | yprof[5] = yprof[0] + height; | |
5344 | ||
5345 | outputCabsPOLYAX->DefinePolygon(6, xprof, yprof); | |
5346 | outputCabsPOLYAX->DefineSection(0,-kSideAOutputCablesWide/2); | |
5347 | outputCabsPOLYAX->DefineSection(1, kSideAOutputCablesWide/2); | |
5348 | ||
5349 | // The PCB boards: five boxes | |
5350 | TGeoBBox *pcbBoardsCu = new TGeoBBox(kSideAPCBBoardsWide/2, | |
5351 | kSideAPCBBoardsCu*kSideAPCBBoardsHigh/2, | |
5352 | kSideAPCBBoardsLen/2); | |
5353 | ||
5354 | TGeoBBox *pcbBoardsEpoxy = new TGeoBBox(kSideAPCBBoardsWide/2, | |
5355 | kSideAPCBBoardsEpoxy*kSideAPCBBoardsHigh/2, | |
5356 | kSideAPCBBoardsLen/2); | |
5357 | ||
5358 | TGeoBBox *pcbBoardsPlast = new TGeoBBox(kSideAPCBBoardsWide/2, | |
5359 | kSideAPCBBoardsPlast*kSideAPCBBoardsHigh/2, | |
5360 | kSideAPCBBoardsLen/2); | |
5361 | ||
5362 | TGeoBBox *pcbBoardsSteel = new TGeoBBox(kSideAPCBBoardsWide/2, | |
5363 | kSideAPCBBoardsSteel*kSideAPCBBoardsHigh/2, | |
5364 | kSideAPCBBoardsLen/2); | |
5365 | ||
5366 | TGeoBBox *pcbBoardsPPS = new TGeoBBox(kSideAPCBBoardsWide/2, | |
5367 | kSideAPCBBoardsPPS*kSideAPCBBoardsHigh/2, | |
5368 | kSideAPCBBoardsLen/2); | |
5369 | ||
798b4e0c | 5370 | |
5371 | // We have all shapes: now create the real volumes | |
57126ea1 | 5372 | TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$"); |
5373 | TGeoMedium *medAntic = mgr->GetMedium("ITS_ANTICORODAL$"); | |
5374 | TGeoMedium *medPOM = mgr->GetMedium("ITS_POLYOXYMETHYLENE$"); | |
5375 | TGeoMedium *medSteel = mgr->GetMedium("ITS_INOX$"); | |
5376 | TGeoMedium *medWater = mgr->GetMedium("ITS_WATER$"); | |
5377 | TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$"); | |
5378 | TGeoMedium *medAir = mgr->GetMedium("ITS_AIR$"); | |
5379 | TGeoMedium *medPBT = mgr->GetMedium("ITS_PBT$"); | |
5380 | TGeoMedium *medOptFib = mgr->GetMedium("ITS_SDD OPTICFIB$"); | |
5381 | TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$"); | |
5382 | TGeoMedium *medKapton = mgr->GetMedium("ITS_SDDKAPTON (POLYCH2)$"); | |
5383 | TGeoMedium *medPOLYAX = mgr->GetMedium("ITS_POLYAX$"); | |
5384 | TGeoMedium *medPPS = mgr->GetMedium("ITS_PPS$"); | |
5385 | TGeoMedium *medEpoxy = mgr->GetMedium("ITS_EPOXY$"); | |
798b4e0c | 5386 | |
5387 | TGeoVolume *forwardTrayCover = new TGeoVolume("ITSsuppSDDSideAForwTrayCover", | |
5388 | forwardCover, medAl); | |
5389 | ||
5390 | forwardTrayCover->SetVisibility(kTRUE); | |
5391 | forwardTrayCover->SetLineColor(kMagenta+1); // Purple | |
5392 | forwardTrayCover->SetLineWidth(1); | |
5393 | forwardTrayCover->SetFillColor(forwardTrayCover->GetLineColor()); | |
5394 | forwardTrayCover->SetFillStyle(4000); // 0% transparent | |
5395 | ||
5396 | TGeoVolume *externalTraySDD = new TGeoVolume("ITSsuppSDDSideAExternalTray", | |
5397 | externalTray, medAl); | |
5398 | ||
5399 | externalTraySDD->SetVisibility(kTRUE); | |
5400 | externalTraySDD->SetLineColor(6); // Purple | |
5401 | externalTraySDD->SetLineWidth(1); | |
5402 | externalTraySDD->SetFillColor(externalTraySDD->GetLineColor()); | |
5403 | externalTraySDD->SetFillStyle(4000); // 0% transparent | |
5404 | ||
5405 | TGeoVolume *externTrayCover = new TGeoVolume("ITSsuppSDDSideAExtTrayCover", | |
5406 | externCover, medAntic); | |
5407 | ||
5408 | externTrayCover->SetVisibility(kTRUE); | |
5409 | externTrayCover->SetLineColor(kMagenta+1); // Purple | |
5410 | externTrayCover->SetLineWidth(1); | |
5411 | externTrayCover->SetFillColor(externTrayCover->GetLineColor()); | |
5412 | externTrayCover->SetFillStyle(4000); // 0% transparent | |
5413 | ||
21ea473f | 5414 | TGeoVolume *pomCoolManif = new TGeoVolume("ITSsuppSDDSideACoolManifPOM", |
57126ea1 | 5415 | coolManifPOM, medPOM); |
5416 | ||
21ea473f | 5417 | pomCoolManif->SetVisibility(kTRUE); |
5418 | pomCoolManif->SetLineColor(kRed); // Red | |
5419 | pomCoolManif->SetLineWidth(1); | |
5420 | pomCoolManif->SetFillColor(pomCoolManif->GetLineColor()); | |
5421 | pomCoolManif->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5422 | |
21ea473f | 5423 | TGeoVolume *steelCoolManif = new TGeoVolume("ITSsuppSDDSideACoolManifSteel", |
57126ea1 | 5424 | coolManifSteel, medSteel); |
5425 | ||
21ea473f | 5426 | steelCoolManif->SetVisibility(kTRUE); |
5427 | steelCoolManif->SetLineColor(kBlue); // Blue | |
5428 | steelCoolManif->SetLineWidth(1); | |
5429 | steelCoolManif->SetFillColor(steelCoolManif->GetLineColor()); | |
5430 | steelCoolManif->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5431 | |
21ea473f | 5432 | TGeoVolume *waterCoolManif = new TGeoVolume("ITSsuppSDDSideACoolManifWater", |
57126ea1 | 5433 | coolManifWater, medWater); |
5434 | ||
21ea473f | 5435 | waterCoolManif->SetVisibility(kTRUE); |
5436 | waterCoolManif->SetLineColor(33); // Light Blue | |
5437 | waterCoolManif->SetLineWidth(1); | |
5438 | waterCoolManif->SetFillColor(waterCoolManif->GetLineColor()); | |
5439 | waterCoolManif->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5440 | |
21ea473f | 5441 | TGeoVolume *alCoolManif = new TGeoVolume("ITSsuppSDDSideACoolManifAl", |
57126ea1 | 5442 | coolManifAl, medAl); |
5443 | ||
21ea473f | 5444 | alCoolManif->SetVisibility(kTRUE); |
5445 | alCoolManif->SetLineColor(6); // Purple | |
5446 | alCoolManif->SetLineWidth(1); | |
5447 | alCoolManif->SetFillColor(alCoolManif->GetLineColor()); | |
5448 | alCoolManif->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5449 | |
21ea473f | 5450 | TGeoVolume *purCoolTubes = new TGeoVolume("ITSsuppSDDSideACoolTubesPUR", |
57126ea1 | 5451 | coolTubesPUR, medPUR); |
5452 | ||
21ea473f | 5453 | purCoolTubes->SetVisibility(kTRUE); |
5454 | purCoolTubes->SetLineColor(kRed); // Red | |
5455 | purCoolTubes->SetLineWidth(1); | |
5456 | purCoolTubes->SetFillColor(purCoolTubes->GetLineColor()); | |
5457 | purCoolTubes->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5458 | |
21ea473f | 5459 | TGeoVolume *waterCoolTubes = new TGeoVolume("ITSsuppSDDSideACoolTubesWater", |
57126ea1 | 5460 | coolTubesWater, medWater); |
5461 | ||
21ea473f | 5462 | waterCoolTubes->SetVisibility(kTRUE); |
5463 | waterCoolTubes->SetLineColor(33); // Light Blue | |
5464 | waterCoolTubes->SetLineWidth(1); | |
5465 | waterCoolTubes->SetFillColor(waterCoolTubes->GetLineColor()); | |
5466 | waterCoolTubes->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5467 | |
21ea473f | 5468 | TGeoVolume *airCoolTubes = new TGeoVolume("ITSsuppSDDSideACoolTubesAir", |
57126ea1 | 5469 | coolTubesAir, medAir); |
5470 | ||
21ea473f | 5471 | airCoolTubes->SetVisibility(kTRUE); |
5472 | airCoolTubes->SetLineColor(41); | |
5473 | airCoolTubes->SetLineWidth(1); | |
5474 | airCoolTubes->SetFillColor(airCoolTubes->GetLineColor()); | |
5475 | airCoolTubes->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5476 | |
21ea473f | 5477 | TGeoVolume *pbtOptConn = new TGeoVolume("ITSsuppSDDSideAOptConnPBT", |
57126ea1 | 5478 | optConnPBT, medPBT); |
5479 | ||
21ea473f | 5480 | pbtOptConn->SetVisibility(kTRUE); |
5481 | pbtOptConn->SetLineColor(kRed); // Red | |
5482 | pbtOptConn->SetLineWidth(1); | |
5483 | pbtOptConn->SetFillColor(pbtOptConn->GetLineColor()); | |
5484 | pbtOptConn->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5485 | |
21ea473f | 5486 | TGeoVolume *steelOptConn = new TGeoVolume("ITSsuppSDDSideAOptConnSteel", |
57126ea1 | 5487 | optConnSteel, medSteel); |
5488 | ||
21ea473f | 5489 | steelOptConn->SetVisibility(kTRUE); |
5490 | steelOptConn->SetLineColor(kBlue); // Blue | |
5491 | steelOptConn->SetLineWidth(1); | |
5492 | steelOptConn->SetFillColor(steelOptConn->GetLineColor()); | |
5493 | steelOptConn->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5494 | |
21ea473f | 5495 | TGeoVolume *alOptConn = new TGeoVolume("ITSsuppSDDSideAOptConnAl", |
57126ea1 | 5496 | optConnAl, medAl); |
5497 | ||
21ea473f | 5498 | alOptConn->SetVisibility(kTRUE); |
5499 | alOptConn->SetLineColor(6); // Purple | |
5500 | alOptConn->SetLineWidth(1); | |
5501 | alOptConn->SetFillColor(alOptConn->GetLineColor()); | |
5502 | alOptConn->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5503 | |
21ea473f | 5504 | TGeoVolume *optFibs = new TGeoVolume("ITSsuppSDDSideAOptFibs", |
57126ea1 | 5505 | opticalFibs, medOptFib); |
5506 | ||
21ea473f | 5507 | optFibs->SetVisibility(kTRUE); |
5508 | optFibs->SetLineColor(kOrange+2); // Orange | |
5509 | optFibs->SetLineWidth(1); | |
5510 | optFibs->SetFillColor(optFibs->GetLineColor()); | |
5511 | optFibs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5512 | |
21ea473f | 5513 | TGeoVolume *cuInputCabs = new TGeoVolume("ITSsuppSDDSideAInputCabsCu", |
57126ea1 | 5514 | inputCabsCu, medCu); |
5515 | ||
21ea473f | 5516 | cuInputCabs->SetVisibility(kTRUE); |
5517 | cuInputCabs->SetLineColor(kBlack); // Black | |
5518 | cuInputCabs->SetLineWidth(1); | |
5519 | cuInputCabs->SetFillColor(cuInputCabs->GetLineColor()); | |
5520 | cuInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5521 | |
21ea473f | 5522 | TGeoVolume *plastInputCabs = new TGeoVolume("ITSsuppSDDSideAInputCabsPlast", |
57126ea1 | 5523 | inputCabsPlast, medPUR); |
5524 | ||
21ea473f | 5525 | plastInputCabs->SetVisibility(kTRUE); |
5526 | plastInputCabs->SetLineColor(kRed); // Red | |
5527 | plastInputCabs->SetLineWidth(1); | |
5528 | plastInputCabs->SetFillColor(plastInputCabs->GetLineColor()); | |
5529 | plastInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5530 | |
21ea473f | 5531 | TGeoVolume *alInputCabs = new TGeoVolume("ITSsuppSDDSideAInputCabsAl", |
57126ea1 | 5532 | inputCabsAl, medAl); |
5533 | ||
21ea473f | 5534 | alInputCabs->SetVisibility(kTRUE); |
5535 | alInputCabs->SetLineColor(6); // Purple | |
5536 | alInputCabs->SetLineWidth(1); | |
5537 | alInputCabs->SetFillColor(alInputCabs->GetLineColor()); | |
5538 | alInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5539 | |
21ea473f | 5540 | TGeoVolume *kaptonInputCabs = new TGeoVolume("ITSsuppSDDSideAInputCabsKapton", |
57126ea1 | 5541 | inputCabsKapton, medKapton); |
5542 | ||
21ea473f | 5543 | kaptonInputCabs->SetVisibility(kTRUE); |
5544 | kaptonInputCabs->SetLineColor(14); // | |
5545 | kaptonInputCabs->SetLineWidth(1); | |
5546 | kaptonInputCabs->SetFillColor(kaptonInputCabs->GetLineColor()); | |
5547 | kaptonInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5548 | |
1c5895a3 | 5549 | TGeoVolume *polyaxInputCabs = new TGeoVolume("ITSsuppSDDSideAInputCabsPOLYAX", |
57126ea1 | 5550 | inputCabsPOLYAX, medPOLYAX); |
5551 | ||
1c5895a3 | 5552 | polyaxInputCabs->SetVisibility(kTRUE); |
5553 | polyaxInputCabs->SetLineColor(34); // | |
5554 | polyaxInputCabs->SetLineWidth(1); | |
5555 | polyaxInputCabs->SetFillColor(polyaxInputCabs->GetLineColor()); | |
5556 | polyaxInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5557 | |
21ea473f | 5558 | TGeoVolume *cuOutputCabs = new TGeoVolume("ITSsuppSDDSideAOutputCabsCu", |
57126ea1 | 5559 | outputCabsCu, medCu); |
5560 | ||
21ea473f | 5561 | cuOutputCabs->SetVisibility(kTRUE); |
5562 | cuOutputCabs->SetLineColor(kBlack); // Black | |
5563 | cuOutputCabs->SetLineWidth(1); | |
5564 | cuOutputCabs->SetFillColor(cuOutputCabs->GetLineColor()); | |
5565 | cuOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5566 | |
21ea473f | 5567 | TGeoVolume *plastOutputCabs = new TGeoVolume("ITSsuppSDDSideAOutputCabsPlast", |
57126ea1 | 5568 | outputCabsPlast, medPUR); |
5569 | ||
21ea473f | 5570 | plastOutputCabs->SetVisibility(kTRUE); |
5571 | plastOutputCabs->SetLineColor(kRed); // Red | |
5572 | plastOutputCabs->SetLineWidth(1); | |
5573 | plastOutputCabs->SetFillColor(plastOutputCabs->GetLineColor()); | |
5574 | plastOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5575 | |
21ea473f | 5576 | TGeoVolume *alOutputCabs = new TGeoVolume("ITSsuppSDDSideAOutputCabsAl", |
57126ea1 | 5577 | outputCabsAl, medAl); |
5578 | ||
21ea473f | 5579 | alOutputCabs->SetVisibility(kTRUE); |
5580 | alOutputCabs->SetLineColor(6); // Purple | |
5581 | alOutputCabs->SetLineWidth(1); | |
5582 | alOutputCabs->SetFillColor(alOutputCabs->GetLineColor()); | |
5583 | alOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5584 | |
21ea473f | 5585 | TGeoVolume *kaptonOutputCabs = new TGeoVolume("ITSsuppSDDSideAOutputCabsKapton", |
57126ea1 | 5586 | outputCabsKapton, medKapton); |
5587 | ||
21ea473f | 5588 | kaptonOutputCabs->SetVisibility(kTRUE); |
5589 | kaptonOutputCabs->SetLineColor(14); // | |
5590 | kaptonOutputCabs->SetLineWidth(1); | |
5591 | kaptonOutputCabs->SetFillColor(kaptonOutputCabs->GetLineColor()); | |
5592 | kaptonOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5593 | |
1c5895a3 | 5594 | TGeoVolume *polyaxOutputCabs = new TGeoVolume("ITSsuppSDDSideAOutputCabsPOLYAX", |
57126ea1 | 5595 | outputCabsPOLYAX, medPOLYAX); |
5596 | ||
1c5895a3 | 5597 | polyaxOutputCabs->SetVisibility(kTRUE); |
5598 | polyaxOutputCabs->SetLineColor(34); // | |
5599 | polyaxOutputCabs->SetLineWidth(1); | |
5600 | polyaxOutputCabs->SetFillColor(polyaxOutputCabs->GetLineColor()); | |
5601 | polyaxOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5602 | |
21ea473f | 5603 | TGeoVolume *cuPCBBoards = new TGeoVolume("ITSsuppSDDSideAPCBBoardsCu", |
57126ea1 | 5604 | pcbBoardsCu, medCu); |
5605 | ||
21ea473f | 5606 | cuPCBBoards->SetVisibility(kTRUE); |
5607 | cuPCBBoards->SetLineColor(kBlack); // Black | |
5608 | cuPCBBoards->SetLineWidth(1); | |
5609 | cuPCBBoards->SetFillColor(cuPCBBoards->GetLineColor()); | |
5610 | cuPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5611 | |
21ea473f | 5612 | TGeoVolume *epoxyPCBBoards = new TGeoVolume("ITSsuppSDDSideAPCBBoardsEpoxy", |
57126ea1 | 5613 | pcbBoardsEpoxy, medEpoxy); |
5614 | ||
21ea473f | 5615 | epoxyPCBBoards->SetVisibility(kTRUE); |
5616 | epoxyPCBBoards->SetLineColor(22); // | |
5617 | epoxyPCBBoards->SetLineWidth(1); | |
5618 | epoxyPCBBoards->SetFillColor(epoxyPCBBoards->GetLineColor()); | |
5619 | epoxyPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5620 | |
21ea473f | 5621 | TGeoVolume *plastPCBBoards = new TGeoVolume("ITSsuppSDDSideAPCBBoardsPlast", |
57126ea1 | 5622 | pcbBoardsPlast, medPUR); |
5623 | ||
21ea473f | 5624 | plastPCBBoards->SetVisibility(kTRUE); |
5625 | plastPCBBoards->SetLineColor(kRed); // Red | |
5626 | plastPCBBoards->SetLineWidth(1); | |
5627 | plastPCBBoards->SetFillColor(plastPCBBoards->GetLineColor()); | |
5628 | plastPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5629 | |
21ea473f | 5630 | TGeoVolume *steelPCBBoards = new TGeoVolume("ITSsuppSDDSideAPCBBoardsSteel", |
57126ea1 | 5631 | pcbBoardsSteel, medSteel); |
5632 | ||
21ea473f | 5633 | steelPCBBoards->SetVisibility(kTRUE); |
5634 | steelPCBBoards->SetLineColor(kBlue); // Blue | |
5635 | steelPCBBoards->SetLineWidth(1); | |
5636 | steelPCBBoards->SetFillColor(steelPCBBoards->GetLineColor()); | |
5637 | steelPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5638 | |
1c5895a3 | 5639 | TGeoVolume *ppsPCBBoards = new TGeoVolume("ITSsuppSDDSideAPCBBoardsPPS", |
57126ea1 | 5640 | pcbBoardsPPS, medPPS); |
5641 | ||
1c5895a3 | 5642 | ppsPCBBoards->SetVisibility(kTRUE); |
5643 | ppsPCBBoards->SetLineColor(kGreen); // Green | |
5644 | ppsPCBBoards->SetLineWidth(1); | |
5645 | ppsPCBBoards->SetFillColor(ppsPCBBoards->GetLineColor()); | |
5646 | ppsPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 5647 | |
798b4e0c | 5648 | |
5649 | // Now build up the tray | |
57126ea1 | 5650 | yloc = kForwardTrayTotalHeight - forwardCover->GetY(3); |
5651 | zloc = kForwardTrayUpperLength - kForwardCoverLength; | |
798b4e0c | 5652 | cableTrayA->AddNode(forwardTrayCover, 1, |
5653 | new TGeoTranslation( 0, yloc, zloc) ); | |
5654 | ||
5655 | Double_t totalhi = kExternTrayTotalHeight + kExternCoverThick | |
5656 | - kExternCoverYTrans; | |
5657 | ||
57126ea1 | 5658 | yloc = totalhi*(1 - CosD(kTrayAZRot)) + kExternTrayYTrans - |
5659 | kExternTrayTotalHeight*CosD(kTrayAZRot); | |
798b4e0c | 5660 | zloc = kExternTrayZTrans + totalhi*SinD(kTrayAZRot); |
5661 | cableTrayA->AddNode(externalTraySDD, 1, | |
5662 | new TGeoCombiTrans( 0, yloc, zloc, | |
5663 | new TGeoRotation("", 0,-kTrayAZRot, 0) ) ); | |
5664 | ||
57126ea1 | 5665 | yloc = kExternCoverThick*(1 - CosD(kTrayAZRot)) + kExternTrayYTrans - |
5666 | kExternCoverYTrans*CosD(kTrayAZRot)/2-0.01; | |
5667 | zloc = kExternTrayZTrans + kExternCoverThick*SinD(kTrayAZRot); | |
798b4e0c | 5668 | cableTrayA->AddNode(externTrayCover,1, |
5669 | new TGeoCombiTrans( 0, yloc, zloc, | |
5670 | new TGeoRotation("", 0,-kTrayAZRot, 0) ) ); | |
5671 | ||
57126ea1 | 5672 | yloc = kForwardTrayThick + coolManifPOM->GetDY(); |
5673 | zloc = coolManifPOM->GetDZ(); | |
21ea473f | 5674 | cableTrayA->AddNode(pomCoolManif, 1, |
57126ea1 | 5675 | new TGeoTranslation( 0, yloc, zloc) ); |
798b4e0c | 5676 | |
57126ea1 | 5677 | yloc += coolManifPOM->GetDY() + coolManifSteel->GetDY(); |
21ea473f | 5678 | cableTrayA->AddNode(steelCoolManif, 1, |
57126ea1 | 5679 | new TGeoTranslation( 0, yloc, zloc) ); |
798b4e0c | 5680 | |
57126ea1 | 5681 | yloc += coolManifSteel->GetDY() + coolManifWater->GetDY(); |
21ea473f | 5682 | cableTrayA->AddNode(waterCoolManif, 1, |
57126ea1 | 5683 | new TGeoTranslation( 0, yloc, zloc) ); |
798b4e0c | 5684 | |
57126ea1 | 5685 | yloc += coolManifWater->GetDY() + coolManifAl->GetDY(); |
21ea473f | 5686 | cableTrayA->AddNode(alCoolManif, 1, |
57126ea1 | 5687 | new TGeoTranslation( 0, yloc, zloc) ); |
798b4e0c | 5688 | |
21ea473f | 5689 | cableTrayA->AddNode(purCoolTubes,1, |
57126ea1 | 5690 | new TGeoCombiTrans( 0, 0, 0, |
5691 | new TGeoRotation("",-90, 90, 90) ) ); | |
21ea473f | 5692 | cableTrayA->AddNode(waterCoolTubes,1, |
57126ea1 | 5693 | new TGeoCombiTrans( 0, 0, 0, |
5694 | new TGeoRotation("",-90, 90, 90) ) ); | |
21ea473f | 5695 | cableTrayA->AddNode(airCoolTubes,1, |
57126ea1 | 5696 | new TGeoCombiTrans( 0, 0, 0, |
5697 | new TGeoRotation("",-90, 90, 90) ) ); | |
5698 | ||
5699 | xloc = coolManifPOM->GetDX() + optConnPBT->GetDX(); | |
5700 | yloc = kForwardTrayThick + optConnPBT->GetDY(); | |
5701 | zloc = optConnPBT->GetDZ(); | |
21ea473f | 5702 | cableTrayA->AddNode(pbtOptConn, 1, |
57126ea1 | 5703 | new TGeoTranslation( xloc, yloc, zloc) ); |
21ea473f | 5704 | cableTrayA->AddNode(pbtOptConn, 2, |
57126ea1 | 5705 | new TGeoTranslation(-xloc, yloc, zloc) ); |
5706 | ||
5707 | yloc += optConnPBT->GetDY() + optConnSteel->GetDY(); | |
21ea473f | 5708 | cableTrayA->AddNode(steelOptConn, 1, |
57126ea1 | 5709 | new TGeoTranslation( xloc, yloc, zloc) ); |
21ea473f | 5710 | cableTrayA->AddNode(steelOptConn, 2, |
57126ea1 | 5711 | new TGeoTranslation(-xloc, yloc, zloc) ); |
5712 | ||
5713 | yloc += optConnSteel->GetDY() + optConnAl->GetDY(); | |
21ea473f | 5714 | cableTrayA->AddNode(alOptConn, 1, |
57126ea1 | 5715 | new TGeoTranslation( xloc, yloc, zloc) ); |
21ea473f | 5716 | cableTrayA->AddNode(alOptConn, 2, |
57126ea1 | 5717 | new TGeoTranslation(-xloc, yloc, zloc) ); |
5718 | ||
5719 | ||
5720 | xloc = kSideACoolTubesWide/2 + kSideAOptFibsWide/2; | |
21ea473f | 5721 | cableTrayA->AddNode(optFibs,1, |
57126ea1 | 5722 | new TGeoCombiTrans( xloc, 0, 0, |
5723 | new TGeoRotation("",-90, 90, 90) ) ); | |
21ea473f | 5724 | cableTrayA->AddNode(optFibs,2, |
57126ea1 | 5725 | new TGeoCombiTrans(-xloc, 0, 0, |
5726 | new TGeoRotation("",-90, 90, 90) ) ); | |
5727 | ||
5728 | yloc = kForwardTrayTotalHeight - forwardCover->GetY(3) - | |
5729 | kSideAInputCablesYTrans - inputCabsPOLYAX->GetDY(); | |
5730 | zloc = inputCabsPOLYAX->GetDZ(); | |
1c5895a3 | 5731 | cableTrayA->AddNode(polyaxInputCabs, 1, |
57126ea1 | 5732 | new TGeoTranslation( 0, yloc, zloc) ); |
5733 | ||
5734 | yloc -= (inputCabsPOLYAX->GetDY() + inputCabsKapton->GetDY()); | |
21ea473f | 5735 | cableTrayA->AddNode(kaptonInputCabs, 1, |
57126ea1 | 5736 | new TGeoTranslation( 0, yloc, zloc) ); |
5737 | ||
5738 | yloc -= (inputCabsKapton->GetDY() + inputCabsAl->GetDY()); | |
21ea473f | 5739 | cableTrayA->AddNode(alInputCabs, 1, |
57126ea1 | 5740 | new TGeoTranslation( 0, yloc, zloc) ); |
5741 | ||
5742 | yloc -= (inputCabsAl->GetDY() + inputCabsPlast->GetDY()); | |
21ea473f | 5743 | cableTrayA->AddNode(plastInputCabs, 1, |
57126ea1 | 5744 | new TGeoTranslation( 0, yloc, zloc) ); |
798b4e0c | 5745 | |
57126ea1 | 5746 | yloc -= (inputCabsPlast->GetDY() + inputCabsCu->GetDY()); |
21ea473f | 5747 | cableTrayA->AddNode(cuInputCabs, 1, |
57126ea1 | 5748 | new TGeoTranslation( 0, yloc, zloc) ); |
5749 | ||
5750 | yloc -= (inputCabsCu->GetDY()+pcbBoardsPPS->GetDY()+kSideAPCBBoardsYTrans); | |
5751 | zloc += pcbBoardsPPS->GetDZ(); | |
1c5895a3 | 5752 | cableTrayA->AddNode(ppsPCBBoards, 1, |
57126ea1 | 5753 | new TGeoTranslation( 0, yloc, zloc) ); |
5754 | ||
5755 | yloc -= (pcbBoardsPPS->GetDY()+pcbBoardsSteel->GetDY()); | |
21ea473f | 5756 | cableTrayA->AddNode(steelPCBBoards, 1, |
57126ea1 | 5757 | new TGeoTranslation( 0, yloc, zloc) ); |
5758 | ||
5759 | yloc -= (pcbBoardsSteel->GetDY()+pcbBoardsPlast->GetDY()); | |
21ea473f | 5760 | cableTrayA->AddNode(plastPCBBoards, 1, |
57126ea1 | 5761 | new TGeoTranslation( 0, yloc, zloc) ); |
5762 | ||
5763 | yloc -= (pcbBoardsPlast->GetDY()+pcbBoardsEpoxy->GetDY()); | |
21ea473f | 5764 | cableTrayA->AddNode(epoxyPCBBoards, 1, |
57126ea1 | 5765 | new TGeoTranslation( 0, yloc, zloc) ); |
5766 | ||
5767 | yloc -= (pcbBoardsEpoxy->GetDY()+pcbBoardsCu->GetDY()); | |
21ea473f | 5768 | cableTrayA->AddNode(cuPCBBoards, 1, |
57126ea1 | 5769 | new TGeoTranslation( 0, yloc, zloc) ); |
5770 | ||
21ea473f | 5771 | cableTrayA->AddNode(cuOutputCabs,1, |
57126ea1 | 5772 | new TGeoCombiTrans( 0, 0, 0, |
5773 | new TGeoRotation("",-90, 90, 90) ) ); | |
21ea473f | 5774 | cableTrayA->AddNode(plastOutputCabs,1, |
57126ea1 | 5775 | new TGeoCombiTrans( 0, 0, 0, |
5776 | new TGeoRotation("",-90, 90, 90) ) ); | |
21ea473f | 5777 | cableTrayA->AddNode(alOutputCabs,1, |
57126ea1 | 5778 | new TGeoCombiTrans( 0, 0, 0, |
5779 | new TGeoRotation("",-90, 90, 90) ) ); | |
21ea473f | 5780 | cableTrayA->AddNode(kaptonOutputCabs,1, |
57126ea1 | 5781 | new TGeoCombiTrans( 0, 0, 0, |
5782 | new TGeoRotation("",-90, 90, 90) ) ); | |
1c5895a3 | 5783 | cableTrayA->AddNode(polyaxOutputCabs,1, |
57126ea1 | 5784 | new TGeoCombiTrans( 0, 0, 0, |
5785 | new TGeoRotation("",-90, 90, 90) ) ); | |
5786 | ||
5787 | ||
5788 | // Finally put everything in the mother volume | |
798b4e0c | 5789 | Double_t rforw = kTrayARTrans + kExternTrayTotalHeight + |
5790 | kExternCoverSideThick - | |
5791 | kForwardTrayTailHeight; | |
5792 | ||
5793 | alpharot = -kTrayAFirstRotAng; | |
5794 | xloc = rforw*SinD(alpharot); | |
5795 | yloc = rforw*CosD(alpharot); | |
5796 | zloc = kTrayAZTrans + kTrayAZToSupportRing - kForwardTrayUpperLength; | |
5797 | ||
57126ea1 | 5798 | moth->AddNode(cableTrayA,1, |
798b4e0c | 5799 | new TGeoCombiTrans( xloc, yloc, zloc, |
5800 | new TGeoRotation("",-alpharot,0,0) ) ); | |
5801 | ||
5802 | alpharot += 180; | |
5803 | xloc = rforw*SinD(alpharot); | |
5804 | yloc = rforw*CosD(alpharot); | |
57126ea1 | 5805 | moth->AddNode(cableTrayA,2, |
798b4e0c | 5806 | new TGeoCombiTrans( xloc, yloc, zloc, |
5807 | new TGeoRotation("",-alpharot,0,0) ) ); | |
5808 | ||
5809 | alpharot = kTrayAFirstRotAng + 2*kTrayASecondRotAng; | |
5810 | xloc = rforw*SinD(alpharot); | |
5811 | yloc = rforw*CosD(alpharot); | |
57126ea1 | 5812 | moth->AddNode(cableTrayA,3, |
798b4e0c | 5813 | new TGeoCombiTrans( xloc, yloc, zloc, |
5814 | new TGeoRotation("",-alpharot,0,0) ) ); | |
5815 | ||
5816 | alpharot += 180; | |
5817 | xloc = rforw*SinD(alpharot); | |
5818 | yloc = rforw*CosD(alpharot); | |
57126ea1 | 5819 | moth->AddNode(cableTrayA,4, |
798b4e0c | 5820 | new TGeoCombiTrans( xloc, yloc, zloc, |
5821 | new TGeoRotation("",-alpharot,0,0) ) ); | |
5822 | ||
5823 | ||
5824 | return; | |
5825 | } | |
5826 | ||
aa177c73 | 5827 | //______________________________________________________________________ |
5828 | void AliITSv11GeometrySupport::SDDCableTraysSideC(TGeoVolume *moth, | |
43aefea7 | 5829 | const TGeoManager *mgr){ |
aa177c73 | 5830 | // |
5831 | // Creates the SDD cable trays which are outside the ITS support cones | |
5832 | // but still inside the TPC on Side C | |
5833 | // (part of this code is taken or anyway inspired to ServicesCableSupport | |
5834 | // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
5835 | // | |
5836 | // Input: | |
5837 | // moth : the TGeoVolume owing the volume structure | |
5838 | // mgr : the GeoManager (default gGeoManager) | |
5839 | // Output: | |
5840 | // | |
5841 | // Created: ??? Bjorn S. Nilsen | |
5842 | // Updated: 17 Apr 2010 Mario Sitta | |
5843 | // | |
5844 | // Technical data are taken from AutoCAD drawings and other (oral) | |
5845 | // information given by F.Tosello | |
5846 | // | |
5847 | ||
57126ea1 | 5848 | // Dimensions and positions of the C-Side Cable Tray |
5849 | // (Change accordingly to CreateSDDSSDTraysSideC !) | |
aa177c73 | 5850 | const Int_t kNumTraySideC = 4; |
5851 | ||
57126ea1 | 5852 | const Double_t kSideCHalfThick = 0.100 *fgkcm; |
5853 | const Double_t kSideCLength1 = 172.800 *fgkcm; | |
5854 | const Double_t kSideCLength2 = 189.300 *fgkcm; | |
5855 | const Double_t kBarCoolRmax = 0.4 *fgkcm; | |
5856 | const Double_t kXShiftBarCool = 13.00 *fgkcm; | |
5857 | ||
aa177c73 | 5858 | const Double_t kSideCFoldAngle = 5.00 *fgkDegree; |
5859 | ||
57126ea1 | 5860 | // Dimensions and positions of the Cable Tray elements |
5861 | const Double_t kSideCCoolManifHalfX = 4.25 *fgkcm; | |
5862 | const Double_t kSideCCoolManifHalfY = 4.03 *fgkcm; | |
5863 | const Double_t kSideCCoolManifHalfZ = 2.17 *fgkcm; | |
5864 | const Double_t kSideCCoolManifPOMFrac = 0.0051; | |
5865 | const Double_t kSideCCoolManifSteelFrac= 0.8502; | |
5866 | const Double_t kSideCCoolManifWaterFrac= 0.0868; | |
5867 | const Double_t kSideCCoolManifAlFrac = 0.0579; | |
5868 | ||
5869 | const Double_t kSideCCoolTubesHigh = 1.88 *fgkcm; | |
5870 | const Double_t kSideCCoolTubesTrans = 0.85 *fgkcm; | |
5871 | const Double_t kSideCCoolTubesPURFrac = 0.5884; | |
5872 | const Double_t kSideCCoolTubesWaterFrac= 0.4114; | |
5873 | const Double_t kSideCCoolTubesAirFrac = 0.0002; | |
5874 | ||
5875 | const Double_t kSideCOptConnHalfX = 0.90 *fgkcm; | |
5876 | const Double_t kSideCOptConnHalfZ = 1.37 *fgkcm; | |
5877 | const Double_t kSideCOptConnPBTFrac = 0.6798; | |
5878 | const Double_t kSideCOptConnSteelFrac = 0.2421; | |
5879 | const Double_t kSideCOptConnAlFrac = 0.0781; | |
5880 | ||
5881 | const Double_t kSideCOptFibsWide = 0.71 *fgkcm; | |
5882 | const Double_t kSideCOptFibsHigh = 3.20 *fgkcm; | |
5883 | const Double_t kSideCOptFibsTrans = 0.20 *fgkcm; | |
5884 | ||
5885 | const Double_t kSideCInputCablesLen = 31.45 *fgkcm; | |
5886 | const Double_t kSideCInputCablesWide = 12.50 *fgkcm; | |
5887 | const Double_t kSideCInputCablesHigh = 0.95 *fgkcm; | |
5888 | const Double_t kSideCInputCablesTrans = 1.15 *fgkcm; | |
5889 | const Double_t kSideCInputCablesCu = 0.7405; | |
5890 | const Double_t kSideCInputCablesPlast = 0.1268; | |
5891 | const Double_t kSideCInputCablesAl = 0.0057; | |
5892 | const Double_t kSideCInputCablesKapton = 0.0172; | |
5893 | const Double_t kSideCInputCablesPOLYAX = 0.1098; | |
5894 | ||
5895 | const Double_t kSideCOutputCablesX0 = 27.40 *fgkcm; | |
5896 | const Double_t kSideCOutputCablesWide = 8.30 *fgkcm; | |
5897 | const Double_t kSideCOutputCablesHigh = 1.18 *fgkcm; | |
5898 | const Double_t kSideCOutputCablesCu = 0.6775; | |
5899 | const Double_t kSideCOutputCablesPlast = 0.1613; | |
5900 | const Double_t kSideCOutputCablesAl = 0.0078; | |
5901 | const Double_t kSideCOutputCablesKapton= 0.0234; | |
5902 | const Double_t kSideCOutputCablesPOLYAX= 0.1300; | |
5903 | ||
5904 | const Double_t kSideCPCBBoardsHalfX = 6.30 *fgkcm; | |
5905 | const Double_t kSideCPCBBoardsHalfY = 2.00 *fgkcm; | |
5906 | const Double_t kSideCPCBBoardsHalfZ = 21.93 *fgkcm; | |
5907 | const Double_t kSideCPCBBoardsCu = 0.3864; | |
5908 | const Double_t kSideCPCBBoardsEpoxy = 0.1491; | |
5909 | const Double_t kSideCPCBBoardsPlast = 0.0579; | |
5910 | const Double_t kSideCPCBBoardsSteel = 0.1517; | |
5911 | const Double_t kSideCPCBBoardsPPS = 0.2549; | |
5912 | ||
aa177c73 | 5913 | // Overall position and rotation of the C-Side Cable Trays |
5914 | const Double_t kTraySideCRPos = 45.30 *fgkcm; | |
5915 | const Double_t kTraySideCZPos = -102.40 *fgkcm; | |
5916 | const Double_t kTraySideCAlphaRot[kNumTraySideC] = { -23.0, 59.0, | |
5917 | /* from SSD tray position */ 180.-23.0, 180.+59.0}; | |
5918 | ||
5919 | ||
5920 | // Local variables | |
57126ea1 | 5921 | Double_t xprof[6], yprof[6]; |
5922 | Double_t height, xloc, yloc, zloc, alpharot, alphafold; | |
aa177c73 | 5923 | |
5924 | ||
5925 | // The assembly holding the metallic structure | |
57126ea1 | 5926 | TGeoVolumeAssembly *trayStructure = CreateSDDSSDTraysSideC("ITSsupportSDDTrayC"); |
5927 | ||
5928 | // Now the volumes inside it | |
5929 | // The cooling manifold: four boxes | |
5930 | // (X and Z are inverted on tray reference system) | |
5931 | TGeoBBox *coolManifPOM = new TGeoBBox(kSideCCoolManifHalfZ, | |
5932 | kSideCCoolManifPOMFrac*kSideCCoolManifHalfY, | |
5933 | kSideCCoolManifHalfX); | |
5934 | ||
5935 | TGeoBBox *coolManifSteel = new TGeoBBox(kSideCCoolManifHalfZ, | |
5936 | kSideCCoolManifSteelFrac*kSideCCoolManifHalfY, | |
5937 | kSideCCoolManifHalfX); | |
5938 | ||
5939 | TGeoBBox *coolManifWater = new TGeoBBox(kSideCCoolManifHalfZ, | |
5940 | kSideCCoolManifWaterFrac*kSideCCoolManifHalfY, | |
5941 | kSideCCoolManifHalfX); | |
5942 | ||
5943 | TGeoBBox *coolManifAl = new TGeoBBox(kSideCCoolManifHalfZ, | |
5944 | kSideCCoolManifAlFrac*kSideCCoolManifHalfY, | |
5945 | kSideCCoolManifHalfX); | |
5946 | ||
5947 | // The cooling tubes: three Xtru's | |
5948 | alpharot = kSideCFoldAngle*TMath::DegToRad(); | |
5949 | ||
5950 | TGeoXtru *coolTubesPUR = new TGeoXtru(2); | |
5951 | ||
5952 | height = kSideCCoolTubesHigh*kSideCCoolTubesPURFrac; | |
5953 | ||
5954 | xprof[0] = 2*kSideCCoolManifHalfZ; | |
5955 | yprof[0] = 2*kSideCHalfThick + kSideCCoolTubesTrans; | |
5956 | xprof[1] = kSideCLength1; | |
5957 | yprof[1] = yprof[0]; | |
5958 | xprof[2] = xprof[1] + kSideCLength2*TMath::Cos(alpharot); | |
5959 | yprof[2] = yprof[1] + kSideCLength2*TMath::Sin(alpharot); | |
5960 | xprof[3] = xprof[2] - height*TMath::Sin(alpharot); | |
5961 | yprof[3] = yprof[2] + height*TMath::Cos(alpharot); | |
5962 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5963 | height, xprof[4], yprof[4]); | |
5964 | xprof[5] = xprof[0]; | |
5965 | yprof[5] = yprof[0] + height; | |
5966 | ||
5967 | coolTubesPUR->DefinePolygon(6, xprof, yprof); | |
5968 | coolTubesPUR->DefineSection(0,-kSideCCoolManifHalfX); | |
5969 | coolTubesPUR->DefineSection(1, kSideCCoolManifHalfX); | |
5970 | ||
5971 | TGeoXtru *coolTubesWater = new TGeoXtru(2); | |
5972 | ||
5973 | height = kSideCCoolTubesHigh*kSideCCoolTubesWaterFrac; | |
5974 | ||
5975 | xprof[0] = coolTubesPUR->GetX(5); | |
5976 | yprof[0] = coolTubesPUR->GetY(5); | |
5977 | xprof[1] = coolTubesPUR->GetX(4); | |
5978 | yprof[1] = coolTubesPUR->GetY(4); | |
5979 | xprof[2] = coolTubesPUR->GetX(3); | |
5980 | yprof[2] = coolTubesPUR->GetY(3); | |
5981 | xprof[3] = xprof[2] - height*TMath::Sin(alpharot); | |
5982 | yprof[3] = yprof[2] + height*TMath::Cos(alpharot); | |
5983 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
5984 | height, xprof[4], yprof[4]); | |
5985 | xprof[5] = xprof[0]; | |
5986 | yprof[5] = yprof[0] + height; | |
5987 | ||
5988 | coolTubesWater->DefinePolygon(6, xprof, yprof); | |
5989 | coolTubesWater->DefineSection(0,-kSideCCoolManifHalfX); | |
5990 | coolTubesWater->DefineSection(1, kSideCCoolManifHalfX); | |
5991 | ||
5992 | TGeoXtru *coolTubesAir = new TGeoXtru(2); | |
5993 | ||
5994 | height = kSideCCoolTubesHigh*kSideCCoolTubesAirFrac; | |
5995 | ||
5996 | xprof[0] = coolTubesWater->GetX(5); | |
5997 | yprof[0] = coolTubesWater->GetY(5); | |
5998 | xprof[1] = coolTubesWater->GetX(4); | |
5999 | yprof[1] = coolTubesWater->GetY(4); | |
6000 | xprof[2] = coolTubesWater->GetX(3); | |
6001 | yprof[2] = coolTubesWater->GetY(3); | |
6002 | xprof[3] = xprof[2] - height*TMath::Sin(alpharot); | |
6003 | yprof[3] = yprof[2] + height*TMath::Cos(alpharot); | |
6004 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
6005 | height, xprof[4], yprof[4]); | |
6006 | xprof[5] = xprof[0]; | |
6007 | yprof[5] = yprof[0] + height; | |
6008 | ||
6009 | coolTubesAir->DefinePolygon(6, xprof, yprof); | |
6010 | coolTubesAir->DefineSection(0,-kSideCCoolManifHalfX); | |
6011 | coolTubesAir->DefineSection(1, kSideCCoolManifHalfX); | |
6012 | ||
6013 | // The optical fiber connectors: three boxes | |
6014 | // (X and Z are inverted on tray reference system) | |
6015 | TGeoBBox *optConnPBT = new TGeoBBox(kSideCOptConnHalfZ, | |
6016 | kSideCOptConnPBTFrac*kSideCCoolManifHalfY, | |
6017 | kSideCOptConnHalfX); | |
6018 | ||
6019 | TGeoBBox *optConnSteel = new TGeoBBox(kSideCOptConnHalfZ, | |
6020 | kSideCOptConnSteelFrac*kSideCCoolManifHalfY, | |
6021 | kSideCOptConnHalfX); | |
6022 | ||
6023 | TGeoBBox *optConnAl = new TGeoBBox(kSideCOptConnHalfZ, | |
6024 | kSideCOptConnAlFrac*kSideCCoolManifHalfY, | |
6025 | kSideCOptConnHalfX); | |
6026 | ||
6027 | // The optical fibers: a Xtru | |
6028 | TGeoXtru *opticalFibs = new TGeoXtru(2); | |
6029 | ||
6030 | xprof[0] = 2*kSideCOptConnHalfZ; | |
6031 | yprof[0] = 2*kSideCHalfThick + kSideCOptFibsTrans; | |
6032 | xprof[1] = kSideCLength1; | |
6033 | yprof[1] = yprof[0]; | |
6034 | xprof[2] = xprof[1] + kSideCLength2*TMath::Cos(alpharot); | |
6035 | yprof[2] = yprof[1] + kSideCLength2*TMath::Sin(alpharot); | |
6036 | xprof[3] = xprof[2] - kSideCOptFibsHigh*TMath::Sin(alpharot); | |
6037 | yprof[3] = yprof[2] + kSideCOptFibsHigh*TMath::Cos(alpharot); | |
6038 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
6039 | kSideCOptFibsHigh, xprof[4], yprof[4]); | |
6040 | xprof[5] = xprof[0]; | |
6041 | yprof[5] = yprof[0] + kSideCOptFibsHigh; | |
6042 | ||
6043 | opticalFibs->DefinePolygon(6, xprof, yprof); | |
6044 | opticalFibs->DefineSection(0,-kSideCOptFibsWide/2); | |
6045 | opticalFibs->DefineSection(1, kSideCOptFibsWide/2); | |
6046 | ||
6047 | // The input cables: five boxes | |
6048 | // (X and Z are inverted on tray reference system) | |
6049 | TGeoBBox *inputCabsCu = new TGeoBBox(kSideCInputCablesLen/2, | |
6050 | kSideCInputCablesCu*kSideCInputCablesHigh/2, | |
6051 | kSideCInputCablesWide/2); | |
6052 | ||
6053 | TGeoBBox *inputCabsPlast = new TGeoBBox(kSideCInputCablesLen/2, | |
6054 | kSideCInputCablesPlast*kSideCInputCablesHigh/2, | |
6055 | kSideCInputCablesWide/2); | |
6056 | ||
6057 | TGeoBBox *inputCabsAl = new TGeoBBox(kSideCInputCablesLen/2, | |
6058 | kSideCInputCablesAl*kSideCInputCablesHigh/2, | |
6059 | kSideCInputCablesWide/2); | |
6060 | ||
6061 | TGeoBBox *inputCabsKapton = new TGeoBBox(kSideCInputCablesLen/2, | |
6062 | kSideCInputCablesKapton*kSideCInputCablesHigh/2, | |
6063 | kSideCInputCablesWide/2); | |
6064 | ||
6065 | TGeoBBox *inputCabsPOLYAX = new TGeoBBox(kSideCInputCablesLen/2, | |
6066 | kSideCInputCablesPOLYAX*kSideCInputCablesHigh/2, | |
6067 | kSideCInputCablesWide/2); | |
6068 | ||
6069 | // The output cables: five Xtru | |
6070 | TGeoXtru *outputCabsCu = new TGeoXtru(2); | |
6071 | ||
6072 | height = kSideCOutputCablesCu*kSideCOutputCablesHigh; | |
6073 | ||
6074 | xprof[0] = coolTubesAir->GetX(5) + kSideCOutputCablesX0; | |
6075 | yprof[0] = coolTubesAir->GetY(5); | |
6076 | xprof[1] = coolTubesAir->GetX(4); | |
6077 | yprof[1] = coolTubesAir->GetY(4); | |
6078 | xprof[2] = coolTubesAir->GetX(3); | |
6079 | yprof[2] = coolTubesAir->GetY(3); | |
6080 | xprof[3] = xprof[2] - height*TMath::Sin(alpharot); | |
6081 | yprof[3] = yprof[2] + height*TMath::Cos(alpharot); | |
6082 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
6083 | height, xprof[4], yprof[4]); | |
6084 | xprof[5] = xprof[0]; | |
6085 | yprof[5] = yprof[0] + height; | |
6086 | ||
6087 | outputCabsCu->DefinePolygon(6, xprof, yprof); | |
6088 | outputCabsCu->DefineSection(0,-kSideCOutputCablesWide/2); | |
6089 | outputCabsCu->DefineSection(1, kSideCOutputCablesWide/2); | |
6090 | ||
6091 | TGeoXtru *outputCabsPlast = new TGeoXtru(2); | |
6092 | ||
6093 | height = kSideCOutputCablesPlast*kSideCOutputCablesHigh; | |
6094 | ||
6095 | xprof[0] = outputCabsCu->GetX(5); | |
6096 | yprof[0] = outputCabsCu->GetY(5); | |
6097 | xprof[1] = outputCabsCu->GetX(4); | |
6098 | yprof[1] = outputCabsCu->GetY(4); | |
6099 | xprof[2] = outputCabsCu->GetX(3); | |
6100 | yprof[2] = outputCabsCu->GetY(3); | |
6101 | xprof[3] = xprof[2] - height*TMath::Sin(alpharot); | |
6102 | yprof[3] = yprof[2] + height*TMath::Cos(alpharot); | |
6103 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
6104 | height, xprof[4], yprof[4]); | |
6105 | xprof[5] = xprof[0]; | |
6106 | yprof[5] = yprof[0] + height; | |
6107 | ||
6108 | outputCabsPlast->DefinePolygon(6, xprof, yprof); | |
6109 | outputCabsPlast->DefineSection(0,-kSideCOutputCablesWide/2); | |
6110 | outputCabsPlast->DefineSection(1, kSideCOutputCablesWide/2); | |
6111 | ||
6112 | TGeoXtru *outputCabsAl = new TGeoXtru(2); | |
6113 | ||
6114 | height = kSideCOutputCablesAl*kSideCOutputCablesHigh; | |
6115 | ||
6116 | xprof[0] = outputCabsPlast->GetX(5); | |
6117 | yprof[0] = outputCabsPlast->GetY(5); | |
6118 | xprof[1] = outputCabsPlast->GetX(4); | |
6119 | yprof[1] = outputCabsPlast->GetY(4); | |
6120 | xprof[2] = outputCabsPlast->GetX(3); | |
6121 | yprof[2] = outputCabsPlast->GetY(3); | |
6122 | xprof[3] = xprof[2] - height*TMath::Sin(alpharot); | |
6123 | yprof[3] = yprof[2] + height*TMath::Cos(alpharot); | |
6124 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
6125 | height, xprof[4], yprof[4]); | |
6126 | xprof[5] = xprof[0]; | |
6127 | yprof[5] = yprof[0] + height; | |
6128 | ||
6129 | outputCabsAl->DefinePolygon(6, xprof, yprof); | |
6130 | outputCabsAl->DefineSection(0,-kSideCOutputCablesWide/2); | |
6131 | outputCabsAl->DefineSection(1, kSideCOutputCablesWide/2); | |
6132 | ||
6133 | TGeoXtru *outputCabsKapton = new TGeoXtru(2); | |
6134 | ||
6135 | height = kSideCOutputCablesKapton*kSideCOutputCablesHigh; | |
6136 | ||
6137 | xprof[0] = outputCabsAl->GetX(5); | |
6138 | yprof[0] = outputCabsAl->GetY(5); | |
6139 | xprof[1] = outputCabsAl->GetX(4); | |
6140 | yprof[1] = outputCabsAl->GetY(4); | |
6141 | xprof[2] = outputCabsAl->GetX(3); | |
6142 | yprof[2] = outputCabsAl->GetY(3); | |
6143 | xprof[3] = xprof[2] - height*TMath::Sin(alpharot); | |
6144 | yprof[3] = yprof[2] + height*TMath::Cos(alpharot); | |
6145 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
6146 | height, xprof[4], yprof[4]); | |
6147 | xprof[5] = xprof[0]; | |
6148 | yprof[5] = yprof[0] + height; | |
6149 | ||
6150 | outputCabsKapton->DefinePolygon(6, xprof, yprof); | |
6151 | outputCabsKapton->DefineSection(0,-kSideCOutputCablesWide/2); | |
6152 | outputCabsKapton->DefineSection(1, kSideCOutputCablesWide/2); | |
6153 | ||
6154 | TGeoXtru *outputCabsPOLYAX = new TGeoXtru(2); | |
6155 | ||
6156 | height = kSideCOutputCablesPOLYAX*kSideCOutputCablesHigh; | |
6157 | ||
6158 | xprof[0] = outputCabsKapton->GetX(5); | |
6159 | yprof[0] = outputCabsKapton->GetY(5); | |
6160 | xprof[1] = outputCabsKapton->GetX(4); | |
6161 | yprof[1] = outputCabsKapton->GetY(4); | |
6162 | xprof[2] = outputCabsKapton->GetX(3); | |
6163 | yprof[2] = outputCabsKapton->GetY(3); | |
6164 | xprof[3] = xprof[2] - height*TMath::Sin(alpharot); | |
6165 | yprof[3] = yprof[2] + height*TMath::Cos(alpharot); | |
6166 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
6167 | height, xprof[4], yprof[4]); | |
6168 | xprof[5] = xprof[0]; | |
6169 | yprof[5] = yprof[0] + height; | |
6170 | ||
6171 | outputCabsPOLYAX->DefinePolygon(6, xprof, yprof); | |
6172 | outputCabsPOLYAX->DefineSection(0,-kSideCOutputCablesWide/2); | |
6173 | outputCabsPOLYAX->DefineSection(1, kSideCOutputCablesWide/2); | |
6174 | ||
6175 | // The PCB boards: five boxes | |
6176 | // (X and Z are inverted on tray reference system) | |
6177 | TGeoBBox *pcbBoardsCu = new TGeoBBox(kSideCPCBBoardsHalfZ, | |
6178 | kSideCPCBBoardsCu*kSideCPCBBoardsHalfY, | |
6179 | kSideCPCBBoardsHalfX); | |
6180 | ||
6181 | TGeoBBox *pcbBoardsEpoxy = new TGeoBBox(kSideCPCBBoardsHalfZ, | |
6182 | kSideCPCBBoardsEpoxy*kSideCPCBBoardsHalfY, | |
6183 | kSideCPCBBoardsHalfX); | |
6184 | ||
6185 | TGeoBBox *pcbBoardsPlast = new TGeoBBox(kSideCPCBBoardsHalfZ, | |
6186 | kSideCPCBBoardsPlast*kSideCPCBBoardsHalfY, | |
6187 | kSideCPCBBoardsHalfX); | |
6188 | ||
6189 | TGeoBBox *pcbBoardsSteel = new TGeoBBox(kSideCPCBBoardsHalfZ, | |
6190 | kSideCPCBBoardsSteel*kSideCPCBBoardsHalfY, | |
6191 | kSideCPCBBoardsHalfX); | |
6192 | ||
6193 | TGeoBBox *pcbBoardsPPS = new TGeoBBox(kSideCPCBBoardsHalfZ, | |
6194 | kSideCPCBBoardsPPS*kSideCPCBBoardsHalfY, | |
6195 | kSideCPCBBoardsHalfX); | |
aa177c73 | 6196 | |
6197 | ||
6198 | // We have all shapes: now create the real volumes | |
57126ea1 | 6199 | TGeoMedium *medPOM = mgr->GetMedium("ITS_POLYOXYMETHYLENE$"); |
6200 | TGeoMedium *medSteel = mgr->GetMedium("ITS_INOX$"); | |
6201 | TGeoMedium *medWater = mgr->GetMedium("ITS_WATER$"); | |
6202 | TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$"); | |
6203 | TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$"); | |
6204 | TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$"); | |
6205 | TGeoMedium *medPOLYAX = mgr->GetMedium("ITS_POLYAX$"); | |
6206 | TGeoMedium *medKapton = mgr->GetMedium("ITS_SDDKAPTON (POLYCH2)$"); | |
6207 | TGeoMedium *medAir = mgr->GetMedium("ITS_AIR$"); | |
6208 | TGeoMedium *medPBT = mgr->GetMedium("ITS_PBT$"); | |
6209 | TGeoMedium *medOptFib = mgr->GetMedium("ITS_SDD OPTICFIB$"); | |
6210 | TGeoMedium *medPPS = mgr->GetMedium("ITS_PPS$"); | |
6211 | TGeoMedium *medEpoxy = mgr->GetMedium("ITS_EPOXY$"); | |
6212 | ||
21ea473f | 6213 | TGeoVolume *pomCoolManif = new TGeoVolume("ITSsuppSDDSideCCoolManifPOM", |
57126ea1 | 6214 | coolManifPOM, medPOM); |
6215 | ||
21ea473f | 6216 | pomCoolManif->SetVisibility(kTRUE); |
6217 | pomCoolManif->SetLineColor(kRed); // Red | |
6218 | pomCoolManif->SetLineWidth(1); | |
6219 | pomCoolManif->SetFillColor(pomCoolManif->GetLineColor()); | |
6220 | pomCoolManif->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6221 | |
21ea473f | 6222 | TGeoVolume *steelCoolManif = new TGeoVolume("ITSsuppSDDSideCCoolManifSteel", |
57126ea1 | 6223 | coolManifSteel, medSteel); |
6224 | ||
21ea473f | 6225 | steelCoolManif->SetVisibility(kTRUE); |
6226 | steelCoolManif->SetLineColor(kBlue); // Blue | |
6227 | steelCoolManif->SetLineWidth(1); | |
6228 | steelCoolManif->SetFillColor(steelCoolManif->GetLineColor()); | |
6229 | steelCoolManif->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6230 | |
21ea473f | 6231 | TGeoVolume *waterCoolManif = new TGeoVolume("ITSsuppSDDSideCCoolManifWater", |
57126ea1 | 6232 | coolManifWater, medWater); |
6233 | ||
21ea473f | 6234 | waterCoolManif->SetVisibility(kTRUE); |
6235 | waterCoolManif->SetLineColor(33); // Light Blue | |
6236 | waterCoolManif->SetLineWidth(1); | |
6237 | waterCoolManif->SetFillColor(waterCoolManif->GetLineColor()); | |
6238 | waterCoolManif->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6239 | |
21ea473f | 6240 | TGeoVolume *alCoolManif = new TGeoVolume("ITSsuppSDDSideCCoolManifAl", |
57126ea1 | 6241 | coolManifAl, medAl); |
6242 | ||
21ea473f | 6243 | alCoolManif->SetVisibility(kTRUE); |
6244 | alCoolManif->SetLineColor(6); // Purple | |
6245 | alCoolManif->SetLineWidth(1); | |
6246 | alCoolManif->SetFillColor(alCoolManif->GetLineColor()); | |
6247 | alCoolManif->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6248 | |
21ea473f | 6249 | TGeoVolume *purCoolTubes = new TGeoVolume("ITSsuppSDDSideCCoolTubesPUR", |
57126ea1 | 6250 | coolTubesPUR, medPUR); |
6251 | ||
21ea473f | 6252 | purCoolTubes->SetVisibility(kTRUE); |
6253 | purCoolTubes->SetLineColor(kRed); // Red | |
6254 | purCoolTubes->SetLineWidth(1); | |
6255 | purCoolTubes->SetFillColor(purCoolTubes->GetLineColor()); | |
6256 | purCoolTubes->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6257 | |
21ea473f | 6258 | TGeoVolume *waterCoolTubes = new TGeoVolume("ITSsuppSDDSideCCoolTubesWater", |
57126ea1 | 6259 | coolTubesWater, medWater); |
6260 | ||
21ea473f | 6261 | waterCoolTubes->SetVisibility(kTRUE); |
6262 | waterCoolTubes->SetLineColor(33); // Light Blue | |
6263 | waterCoolTubes->SetLineWidth(1); | |
6264 | waterCoolTubes->SetFillColor(waterCoolTubes->GetLineColor()); | |
6265 | waterCoolTubes->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6266 | |
21ea473f | 6267 | TGeoVolume *airCoolTubes = new TGeoVolume("ITSsuppSDDSideCCoolTubesAir", |
57126ea1 | 6268 | coolTubesAir, medAir); |
6269 | ||
21ea473f | 6270 | airCoolTubes->SetVisibility(kTRUE); |
6271 | airCoolTubes->SetLineColor(41); | |
6272 | airCoolTubes->SetLineWidth(1); | |
6273 | airCoolTubes->SetFillColor(airCoolTubes->GetLineColor()); | |
6274 | airCoolTubes->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6275 | |
21ea473f | 6276 | TGeoVolume *pbtOptConn = new TGeoVolume("ITSsuppSDDSideCOptConnPBT", |
57126ea1 | 6277 | optConnPBT, medPBT); |
6278 | ||
21ea473f | 6279 | pbtOptConn->SetVisibility(kTRUE); |
6280 | pbtOptConn->SetLineColor(kRed); // Red | |
6281 | pbtOptConn->SetLineWidth(1); | |
6282 | pbtOptConn->SetFillColor(pbtOptConn->GetLineColor()); | |
6283 | pbtOptConn->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6284 | |
21ea473f | 6285 | TGeoVolume *steelOptConn = new TGeoVolume("ITSsuppSDDSideCOptConnSteel", |
57126ea1 | 6286 | optConnSteel, medSteel); |
6287 | ||
21ea473f | 6288 | steelOptConn->SetVisibility(kTRUE); |
6289 | steelOptConn->SetLineColor(kBlue); // Blue | |
6290 | steelOptConn->SetLineWidth(1); | |
6291 | steelOptConn->SetFillColor(steelOptConn->GetLineColor()); | |
6292 | steelOptConn->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6293 | |
21ea473f | 6294 | TGeoVolume *alOptConn = new TGeoVolume("ITSsuppSDDSideCOptConnAl", |
57126ea1 | 6295 | optConnAl, medAl); |
6296 | ||
21ea473f | 6297 | alOptConn->SetVisibility(kTRUE); |
6298 | alOptConn->SetLineColor(6); // Purple | |
6299 | alOptConn->SetLineWidth(1); | |
6300 | alOptConn->SetFillColor(alOptConn->GetLineColor()); | |
6301 | alOptConn->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6302 | |
21ea473f | 6303 | TGeoVolume *optFibs = new TGeoVolume("ITSsuppSDDSideCOptFibs", |
57126ea1 | 6304 | opticalFibs, medOptFib); |
6305 | ||
21ea473f | 6306 | optFibs->SetVisibility(kTRUE); |
6307 | optFibs->SetLineColor(kOrange+2); // Orange | |
6308 | optFibs->SetLineWidth(1); | |
6309 | optFibs->SetFillColor(optFibs->GetLineColor()); | |
6310 | optFibs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6311 | |
21ea473f | 6312 | TGeoVolume *cuInputCabs = new TGeoVolume("ITSsuppSDDSideCInputCabsCu", |
57126ea1 | 6313 | inputCabsCu, medCu); |
6314 | ||
21ea473f | 6315 | cuInputCabs->SetVisibility(kTRUE); |
6316 | cuInputCabs->SetLineColor(kBlack); // Black | |
6317 | cuInputCabs->SetLineWidth(1); | |
6318 | cuInputCabs->SetFillColor(cuInputCabs->GetLineColor()); | |
6319 | cuInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6320 | |
21ea473f | 6321 | TGeoVolume *plastInputCabs = new TGeoVolume("ITSsuppSDDSideCInputCabsPlast", |
57126ea1 | 6322 | inputCabsPlast, medPUR); |
6323 | ||
21ea473f | 6324 | plastInputCabs->SetVisibility(kTRUE); |
6325 | plastInputCabs->SetLineColor(kRed); // Red | |
6326 | plastInputCabs->SetLineWidth(1); | |
6327 | plastInputCabs->SetFillColor(plastInputCabs->GetLineColor()); | |
6328 | plastInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6329 | |
21ea473f | 6330 | TGeoVolume *alInputCabs = new TGeoVolume("ITSsuppSDDSideCInputCabsAl", |
57126ea1 | 6331 | inputCabsAl, medAl); |
6332 | ||
21ea473f | 6333 | alInputCabs->SetVisibility(kTRUE); |
6334 | alInputCabs->SetLineColor(6); // Purple | |
6335 | alInputCabs->SetLineWidth(1); | |
6336 | alInputCabs->SetFillColor(alInputCabs->GetLineColor()); | |
6337 | alInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6338 | |
21ea473f | 6339 | TGeoVolume *kaptonInputCabs = new TGeoVolume("ITSsuppSDDSideCInputCabsKapton", |
57126ea1 | 6340 | inputCabsKapton, medKapton); |
6341 | ||
21ea473f | 6342 | kaptonInputCabs->SetVisibility(kTRUE); |
6343 | kaptonInputCabs->SetLineColor(14); // | |
6344 | kaptonInputCabs->SetLineWidth(1); | |
6345 | kaptonInputCabs->SetFillColor(kaptonInputCabs->GetLineColor()); | |
6346 | kaptonInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6347 | |
1c5895a3 | 6348 | TGeoVolume *polyaxInputCabs = new TGeoVolume("ITSsuppSDDSideCInputCabsPOLYAX", |
57126ea1 | 6349 | inputCabsPOLYAX, medPOLYAX); |
6350 | ||
1c5895a3 | 6351 | polyaxInputCabs->SetVisibility(kTRUE); |
6352 | polyaxInputCabs->SetLineColor(34); // | |
6353 | polyaxInputCabs->SetLineWidth(1); | |
6354 | polyaxInputCabs->SetFillColor(polyaxInputCabs->GetLineColor()); | |
6355 | polyaxInputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6356 | |
21ea473f | 6357 | TGeoVolume *cuOutputCabs = new TGeoVolume("ITSsuppSDDSideCOutputCabsCu", |
57126ea1 | 6358 | outputCabsCu, medCu); |
6359 | ||
21ea473f | 6360 | cuOutputCabs->SetVisibility(kTRUE); |
6361 | cuOutputCabs->SetLineColor(kBlack); // Black | |
6362 | cuOutputCabs->SetLineWidth(1); | |
6363 | cuOutputCabs->SetFillColor(cuOutputCabs->GetLineColor()); | |
6364 | cuOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6365 | |
21ea473f | 6366 | TGeoVolume *plastOutputCabs = new TGeoVolume("ITSsuppSDDSideCOutputCabsPlast", |
57126ea1 | 6367 | outputCabsPlast, medPUR); |
6368 | ||
21ea473f | 6369 | plastOutputCabs->SetVisibility(kTRUE); |
6370 | plastOutputCabs->SetLineColor(kRed); // Red | |
6371 | plastOutputCabs->SetLineWidth(1); | |
6372 | plastOutputCabs->SetFillColor(plastOutputCabs->GetLineColor()); | |
6373 | plastOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6374 | |
21ea473f | 6375 | TGeoVolume *alOutputCabs = new TGeoVolume("ITSsuppSDDSideCOutputCabsAl", |
57126ea1 | 6376 | outputCabsAl, medAl); |
6377 | ||
21ea473f | 6378 | alOutputCabs->SetVisibility(kTRUE); |
6379 | alOutputCabs->SetLineColor(6); // Purple | |
6380 | alOutputCabs->SetLineWidth(1); | |
6381 | alOutputCabs->SetFillColor(alOutputCabs->GetLineColor()); | |
6382 | alOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6383 | |
21ea473f | 6384 | TGeoVolume *kaptonOutputCabs = new TGeoVolume("ITSsuppSDDSideCOutputCabsKapton", |
57126ea1 | 6385 | outputCabsKapton, medKapton); |
6386 | ||
21ea473f | 6387 | kaptonOutputCabs->SetVisibility(kTRUE); |
6388 | kaptonOutputCabs->SetLineColor(14); // | |
6389 | kaptonOutputCabs->SetLineWidth(1); | |
6390 | kaptonOutputCabs->SetFillColor(kaptonOutputCabs->GetLineColor()); | |
6391 | kaptonOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6392 | |
1c5895a3 | 6393 | TGeoVolume *polyaxOutputCabs = new TGeoVolume("ITSsuppSDDSideCOutputCabsPOLYAX", |
57126ea1 | 6394 | outputCabsPOLYAX, medPOLYAX); |
6395 | ||
1c5895a3 | 6396 | polyaxOutputCabs->SetVisibility(kTRUE); |
6397 | polyaxOutputCabs->SetLineColor(34); // | |
6398 | polyaxOutputCabs->SetLineWidth(1); | |
6399 | polyaxOutputCabs->SetFillColor(polyaxOutputCabs->GetLineColor()); | |
6400 | polyaxOutputCabs->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6401 | |
21ea473f | 6402 | TGeoVolume *cuPCBBoards = new TGeoVolume("ITSsuppSDDSideCPCBBoardsCu", |
57126ea1 | 6403 | pcbBoardsCu, medCu); |
6404 | ||
21ea473f | 6405 | cuPCBBoards->SetVisibility(kTRUE); |
6406 | cuPCBBoards->SetLineColor(kBlack); // Black | |
6407 | cuPCBBoards->SetLineWidth(1); | |
6408 | cuPCBBoards->SetFillColor(cuPCBBoards->GetLineColor()); | |
6409 | cuPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6410 | |
21ea473f | 6411 | TGeoVolume *epoxyPCBBoards = new TGeoVolume("ITSsuppSDDSideCPCBBoardsEpoxy", |
57126ea1 | 6412 | pcbBoardsEpoxy, medEpoxy); |
6413 | ||
21ea473f | 6414 | epoxyPCBBoards->SetVisibility(kTRUE); |
6415 | epoxyPCBBoards->SetLineColor(22); // | |
6416 | epoxyPCBBoards->SetLineWidth(1); | |
6417 | epoxyPCBBoards->SetFillColor(epoxyPCBBoards->GetLineColor()); | |
6418 | epoxyPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6419 | |
21ea473f | 6420 | TGeoVolume *plastPCBBoards = new TGeoVolume("ITSsuppSDDSideCPCBBoardsPlast", |
57126ea1 | 6421 | pcbBoardsPlast, medPUR); |
6422 | ||
21ea473f | 6423 | plastPCBBoards->SetVisibility(kTRUE); |
6424 | plastPCBBoards->SetLineColor(kRed); // Red | |
6425 | plastPCBBoards->SetLineWidth(1); | |
6426 | plastPCBBoards->SetFillColor(plastPCBBoards->GetLineColor()); | |
6427 | plastPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6428 | |
21ea473f | 6429 | TGeoVolume *steelPCBBoards = new TGeoVolume("ITSsuppSDDSideCPCBBoardsSteel", |
57126ea1 | 6430 | pcbBoardsSteel, medSteel); |
6431 | ||
21ea473f | 6432 | steelPCBBoards->SetVisibility(kTRUE); |
6433 | steelPCBBoards->SetLineColor(kBlue); // Blue | |
6434 | steelPCBBoards->SetLineWidth(1); | |
6435 | steelPCBBoards->SetFillColor(steelPCBBoards->GetLineColor()); | |
6436 | steelPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6437 | |
1c5895a3 | 6438 | TGeoVolume *ppsPCBBoards = new TGeoVolume("ITSsuppSDDSideCPCBBoardsPPS", |
57126ea1 | 6439 | pcbBoardsPPS, medPPS); |
6440 | ||
1c5895a3 | 6441 | ppsPCBBoards->SetVisibility(kTRUE); |
6442 | ppsPCBBoards->SetLineColor(kGreen); // Green | |
6443 | ppsPCBBoards->SetLineWidth(1); | |
6444 | ppsPCBBoards->SetFillColor(ppsPCBBoards->GetLineColor()); | |
6445 | ppsPCBBoards->SetFillStyle(4000); // 0% transparent | |
57126ea1 | 6446 | |
6447 | ||
6448 | // Now fill the tray | |
6449 | xloc = coolManifPOM->GetDX(); | |
6450 | yloc = 2*kSideCHalfThick + coolManifPOM->GetDY(); | |
21ea473f | 6451 | trayStructure->AddNode(pomCoolManif, 1, |
57126ea1 | 6452 | new TGeoTranslation( xloc, yloc, 0) ); |
6453 | ||
6454 | yloc += coolManifPOM->GetDY() + coolManifSteel->GetDY(); | |
21ea473f | 6455 | trayStructure->AddNode(steelCoolManif, 1, |
57126ea1 | 6456 | new TGeoTranslation( xloc, yloc, 0) ); |
6457 | ||
6458 | yloc += coolManifSteel->GetDY() + coolManifWater->GetDY(); | |
21ea473f | 6459 | trayStructure->AddNode(waterCoolManif, 1, |
57126ea1 | 6460 | new TGeoTranslation( xloc, yloc, 0) ); |
6461 | ||
6462 | yloc += coolManifWater->GetDY() + coolManifAl->GetDY(); | |
21ea473f | 6463 | trayStructure->AddNode(alCoolManif, 1, |
57126ea1 | 6464 | new TGeoTranslation( xloc, yloc, 0) ); |
6465 | ||
6466 | xloc = inputCabsCu->GetDX(); | |
6467 | yloc += coolManifWater->GetDY() + inputCabsCu->GetDY() | |
6468 | + kSideCInputCablesTrans; | |
21ea473f | 6469 | trayStructure->AddNode(cuInputCabs, 1, |
57126ea1 | 6470 | new TGeoTranslation( xloc, yloc, 0) ); |
6471 | ||
6472 | yloc += inputCabsCu->GetDY() + inputCabsPlast->GetDY(); | |
21ea473f | 6473 | trayStructure->AddNode(plastInputCabs, 1, |
57126ea1 | 6474 | new TGeoTranslation( xloc, yloc, 0) ); |
6475 | ||
6476 | yloc += inputCabsPlast->GetDY() + inputCabsAl->GetDY(); | |
21ea473f | 6477 | trayStructure->AddNode(alInputCabs, 1, |
57126ea1 | 6478 | new TGeoTranslation( xloc, yloc, 0) ); |
6479 | ||
6480 | yloc += inputCabsAl->GetDY() + inputCabsKapton->GetDY(); | |
21ea473f | 6481 | trayStructure->AddNode(kaptonInputCabs, 1, |
57126ea1 | 6482 | new TGeoTranslation( xloc, yloc, 0) ); |
6483 | ||
6484 | yloc += inputCabsKapton->GetDY() + inputCabsPOLYAX->GetDY(); | |
1c5895a3 | 6485 | trayStructure->AddNode(polyaxInputCabs, 1, |
57126ea1 | 6486 | new TGeoTranslation( xloc, yloc, 0) ); |
6487 | ||
21ea473f | 6488 | trayStructure->AddNode(purCoolTubes , 1, 0); |
6489 | trayStructure->AddNode(waterCoolTubes, 1, 0); | |
6490 | trayStructure->AddNode(airCoolTubes , 1, 0); | |
57126ea1 | 6491 | |
6492 | xloc = optConnPBT->GetDX(); | |
6493 | yloc = 2*kSideCHalfThick + optConnPBT->GetDY(); | |
6494 | zloc = coolManifPOM->GetDZ() + optConnPBT->GetDZ(); | |
21ea473f | 6495 | trayStructure->AddNode(pbtOptConn, 1, |
57126ea1 | 6496 | new TGeoTranslation( xloc, yloc, zloc) ); |
21ea473f | 6497 | trayStructure->AddNode(pbtOptConn, 2, |
57126ea1 | 6498 | new TGeoTranslation( xloc, yloc,-zloc) ); |
6499 | ||
6500 | yloc += optConnPBT->GetDY() + optConnSteel->GetDY(); | |
21ea473f | 6501 | trayStructure->AddNode(steelOptConn, 1, |
57126ea1 | 6502 | new TGeoTranslation( xloc, yloc, zloc) ); |
21ea473f | 6503 | trayStructure->AddNode(steelOptConn, 2, |
57126ea1 | 6504 | new TGeoTranslation( xloc, yloc,-zloc) ); |
6505 | ||
6506 | yloc += optConnSteel->GetDY() + optConnAl->GetDY(); | |
21ea473f | 6507 | trayStructure->AddNode(alOptConn, 1, |
57126ea1 | 6508 | new TGeoTranslation( xloc, yloc, zloc) ); |
21ea473f | 6509 | trayStructure->AddNode(alOptConn, 2, |
57126ea1 | 6510 | new TGeoTranslation( xloc, yloc,-zloc) ); |
6511 | ||
21ea473f | 6512 | trayStructure->AddNode(optFibs, 1, |
57126ea1 | 6513 | new TGeoTranslation( 0, 0, zloc) ); |
21ea473f | 6514 | trayStructure->AddNode(optFibs, 2, |
57126ea1 | 6515 | new TGeoTranslation( 0, 0,-zloc) ); |
6516 | ||
21ea473f | 6517 | trayStructure->AddNode(cuOutputCabs , 1, 0); |
6518 | trayStructure->AddNode(plastOutputCabs , 1, 0); | |
6519 | trayStructure->AddNode(alOutputCabs , 1, 0); | |
6520 | trayStructure->AddNode(kaptonOutputCabs, 1, 0); | |
1c5895a3 | 6521 | trayStructure->AddNode(polyaxOutputCabs, 1, 0); |
57126ea1 | 6522 | |
6523 | xloc = kXShiftBarCool + kBarCoolRmax + pcbBoardsCu->GetDX(); | |
6524 | yloc = outputCabsPOLYAX->GetY(5) + pcbBoardsCu->GetDY(); | |
21ea473f | 6525 | trayStructure->AddNode(cuPCBBoards, 1, |
57126ea1 | 6526 | new TGeoTranslation( xloc, yloc , 0) ); |
6527 | ||
6528 | yloc += pcbBoardsCu->GetDY() + pcbBoardsEpoxy->GetDY(); | |
21ea473f | 6529 | trayStructure->AddNode(epoxyPCBBoards, 1, |
57126ea1 | 6530 | new TGeoTranslation( xloc, yloc , 0) ); |
6531 | ||
6532 | yloc += pcbBoardsEpoxy->GetDY() + pcbBoardsPlast->GetDY(); | |
21ea473f | 6533 | trayStructure->AddNode(plastPCBBoards, 1, |
57126ea1 | 6534 | new TGeoTranslation( xloc, yloc , 0) ); |
6535 | ||
6536 | yloc += pcbBoardsPlast->GetDY() + pcbBoardsSteel->GetDY(); | |
21ea473f | 6537 | trayStructure->AddNode(steelPCBBoards, 1, |
57126ea1 | 6538 | new TGeoTranslation( xloc, yloc , 0) ); |
6539 | ||
6540 | yloc += pcbBoardsSteel->GetDY() + pcbBoardsPPS->GetDY(); | |
1c5895a3 | 6541 | trayStructure->AddNode(ppsPCBBoards, 1, |
57126ea1 | 6542 | new TGeoTranslation( xloc, yloc , 0) ); |
6543 | ||
aa177c73 | 6544 | |
6545 | // Finally put everything in the mother volume | |
6546 | alphafold = kSideCFoldAngle; | |
6547 | ||
6548 | for (Int_t jt = 0; jt < kNumTraySideC; jt++) { | |
6549 | alpharot = kTraySideCAlphaRot[jt]; | |
6550 | xloc = kTraySideCRPos*SinD(alpharot); | |
6551 | yloc = kTraySideCRPos*CosD(alpharot); | |
57126ea1 | 6552 | moth->AddNode(trayStructure,jt+1, |
aa177c73 | 6553 | new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos, |
6554 | new TGeoRotation("",-90.+alpharot,-90.,90.+alphafold))); | |
6555 | } | |
6556 | ||
6557 | ||
6558 | return; | |
6559 | } | |
6560 | ||
6561 | ||
798b4e0c | 6562 | //______________________________________________________________________ |
6563 | void AliITSv11GeometrySupport::SSDCableTraysSideA(TGeoVolume *moth, | |
43aefea7 | 6564 | const TGeoManager *mgr){ |
798b4e0c | 6565 | // |
6566 | // Creates the SSD cable trays which are outside the ITS support cones | |
6567 | // but still inside the TPC on Side A | |
6568 | // (part of this code is taken or anyway inspired to ServicesCableSupport | |
6569 | // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
6570 | // | |
6571 | // Input: | |
6572 | // moth : the TGeoVolume owing the volume structure | |
6573 | // mgr : the GeoManager (default gGeoManager) | |
6574 | // Output: | |
6575 | // | |
6576 | // Created: ??? Bjorn S. Nilsen | |
6577 | // Updated: 30 Dec 2009 Mario Sitta | |
6578 | // | |
6579 | // Technical data are taken from AutoCAD drawings, L.Simonetti technical | |
6580 | // drawings and other (oral) information given by F.Tosello and | |
6581 | // Ton van den Brink | |
6582 | // Cables and cooling tubes are approximated with proper materials and | |
6583 | // rectangular cross sections, always preserving the total material budget. | |
6584 | // | |
6585 | ||
6586 | // Dimensions and positions of the A-Side Cable Trays | |
6587 | // (parts of 0872/G/D) | |
573a206f | 6588 | const Double_t kTrayARTrans = 408.35 *fgkmm; |
798b4e0c | 6589 | const Double_t kTrayAZTrans = 1011.00 *fgkmm; |
6590 | const Double_t kForwardSideYTrans = 12.00 *fgkmm;//!!!TO BE CHECKED!!! | |
6591 | const Double_t kCoversYTrans = 2.00 *fgkmm; | |
6592 | const Double_t kTrayAZRot = (180-169.5);// Degrees | |
6593 | const Double_t kTrayAFirstRotAng = 22.00; // Degrees | |
6594 | const Double_t kTrayASecondRotAng = 15.00; // Degrees | |
6595 | ||
6596 | const Double_t kTrayTotalHeight = 52.00 *fgkmm; | |
6597 | const Double_t kTrayHeighToBend = 32.00 *fgkmm; | |
6598 | const Double_t kTrayWidth = 130.00 *fgkmm; | |
6599 | const Double_t kTrayThick = 2.00 *fgkmm; | |
6600 | ||
6601 | const Double_t kTrayBendAngle = 22.00 *TMath::DegToRad(); | |
6602 | ||
6603 | const Double_t kForwardTrayTotalLen = 853.00 *fgkmm; | |
6604 | const Double_t kForwardTrayFirstLen = 350.00 *fgkmm; | |
6605 | const Double_t kForwardTrayFirstHeight = 47.00 *fgkmm; | |
6606 | const Double_t kForwardCoverLen = 420.00 *fgkmm; | |
6607 | ||
6608 | const Double_t kForwardSideLength = kForwardTrayFirstLen;//!!!TO BE CHECKED!!! | |
6609 | const Double_t kForwardSideHeight = 90.00 *fgkmm;//!!!TO BE CHECKED!!! | |
6610 | const Double_t kForwardSideThick = 1.00 *fgkmm;//!!!TO BE CHECKED!!! | |
6611 | const Double_t kForwardCoverHeight = 10.00 *fgkmm;//!!!TO BE CHECKED!!! | |
6612 | ||
6613 | const Double_t kExternalTrayTotalLen = 1200.00 *fgkmm; | |
6614 | const Double_t kExternalCoverLen = kExternalTrayTotalLen; | |
6615 | const Double_t kExternalCoverThick = 5.00 *fgkmm; | |
6616 | ||
6617 | const Int_t kForwardTrayNpoints = 16; | |
6618 | ||
6619 | const Double_t kServicesWidth = 100.00 *fgkmm; | |
6620 | const Double_t kCopperHeight = 11.20 *fgkmm;// 1120 mm^2 | |
6621 | const Double_t kCablePlasticHeight = 11.50 *fgkmm;// 1150 mm^2 | |
6622 | const Double_t kCoolingWaterHeight = 2.65 *fgkmm;// 265 mm^2 | |
6623 | const Double_t kPoliUrethaneHeight = 4.62 *fgkmm;// 462 mm^2 | |
6624 | ||
6625 | ||
6626 | // Local variables | |
6627 | Double_t xprof[kForwardTrayNpoints], yprof[kForwardTrayNpoints]; | |
6628 | Double_t xloc, yloc, zloc, alpharot, totalhi; | |
6629 | ||
6630 | ||
6631 | // The two tray components as assemblies | |
573a206f | 6632 | TGeoVolumeAssembly *cableTrayAForw = |
6633 | new TGeoVolumeAssembly("ITSsupportSSDTrayAForw"); | |
798b4e0c | 6634 | TGeoVolumeAssembly *cableTrayAExt = |
6635 | new TGeoVolumeAssembly("ITSsupportSSDTrayAExt"); | |
6636 | ||
6637 | ||
6638 | // First create all needed shapes | |
6639 | ||
6640 | // The first part of the forward tray (part of 0872/G/D/07): a Xtru | |
6641 | TGeoXtru *forwTrayPart1 = new TGeoXtru(2); | |
6642 | ||
6643 | xprof[3] = kTrayWidth/2; | |
6644 | yprof[3] = kForwardTrayFirstHeight; | |
6645 | xprof[2] = xprof[3] - kTrayThick; | |
6646 | yprof[2] = yprof[3]; | |
6647 | xprof[4] = xprof[3]; | |
6648 | yprof[4] = kTrayTotalHeight - kTrayHeighToBend; | |
6649 | xprof[5] = xprof[4] - yprof[4]*TMath::Tan(kTrayBendAngle); | |
6650 | yprof[5] = 0; | |
6651 | ||
6652 | InsidePoint( xprof[3], yprof[3], xprof[4], yprof[4], xprof[5], yprof[5], | |
6653 | -kTrayThick, xprof[1], yprof[1]); | |
6654 | ||
6655 | xprof[6] = -xprof[5]; | |
6656 | yprof[6] = yprof[5]; | |
6657 | ||
6658 | InsidePoint( xprof[4], yprof[4], xprof[5], yprof[5], xprof[6], yprof[6], | |
6659 | -kTrayThick, xprof[0], yprof[0]); | |
6660 | ||
6661 | // We did the right side, now reflex on the left side | |
6662 | for (Int_t jp = 0; jp < 6; jp++) { | |
6663 | xprof[6+jp] = -xprof[5-jp]; | |
6664 | yprof[6+jp] = yprof[5-jp]; | |
6665 | } | |
6666 | ||
6667 | // And now the actual Xtru | |
6668 | forwTrayPart1->DefinePolygon(12, xprof, yprof); | |
6669 | forwTrayPart1->DefineSection(0, 0); | |
6670 | forwTrayPart1->DefineSection(1, kForwardTrayFirstLen); | |
6671 | ||
6672 | // The second part of the forward tray (part of 0872/G/D/07): a Xtru | |
6673 | TGeoXtru *forwTrayPart2 = | |
6674 | CreateSDDSSDTraysSideA(kForwardTrayTotalLen - kForwardTrayFirstLen, | |
6675 | kTrayTotalHeight); | |
6676 | ||
6677 | // The external tray (as 0872/G/D/03): a Xtru with same profile | |
6678 | TGeoXtru *externalTray = CreateSDDSSDTraysSideA(kExternalTrayTotalLen, | |
6679 | kTrayTotalHeight); | |
6680 | ||
6681 | // The side wall of the forward tray: a BBox | |
6682 | TGeoBBox *forwSide = new TGeoBBox(kForwardSideThick/2, | |
6683 | kForwardSideHeight/2, | |
6684 | kForwardSideLength/2); | |
6685 | ||
6686 | // The side cover over the walls: a Xtru | |
6687 | TGeoXtru *forwSideCover = new TGeoXtru(2); | |
6688 | forwSideCover->SetName("ITSsuppSSDForwCover"); | |
6689 | ||
6690 | xprof[0] = kTrayWidth/2 + 2*kForwardSideThick; | |
6691 | yprof[0] = kForwardCoverHeight; | |
6692 | xprof[1] = xprof[0]; | |
6693 | yprof[1] = 0; | |
6694 | xprof[2] = xprof[1] - kForwardSideThick; | |
6695 | yprof[2] = yprof[1]; | |
6696 | xprof[3] = xprof[2]; | |
6697 | yprof[3] = yprof[0] - kForwardSideThick; | |
6698 | ||
6699 | // We did the right side, now reflex on the left side | |
6700 | for (Int_t jp = 0; jp < 4; jp++) { | |
6701 | xprof[4+jp] = -xprof[3-jp]; | |
6702 | yprof[4+jp] = yprof[3-jp]; | |
6703 | } | |
6704 | ||
6705 | forwSideCover->DefinePolygon(8, xprof, yprof); | |
6706 | forwSideCover->DefineSection(0, 0); | |
6707 | forwSideCover->DefineSection(1, kForwardSideLength); | |
6708 | ||
6709 | // The forward and external covers: two Composite Shape's | |
6710 | TGeoCompositeShape *forwardCover = CreateTrayAForwardCover(kForwardCoverLen); | |
6711 | ||
6712 | TGeoCompositeShape *externCover = CreateTrayAExternalCover(kExternalCoverLen); | |
6713 | ||
6714 | // The cable copper inside the forward tray: a BBox | |
6715 | TGeoBBox *forwCopper = new TGeoBBox(kServicesWidth/2, | |
6716 | kCopperHeight/2, | |
6717 | kForwardTrayTotalLen/2); | |
6718 | ||
6719 | // The cable copper inside the forward tray: a Xtru | |
6720 | TGeoXtru *extCopper = new TGeoXtru(2); | |
6721 | extCopper->SetName("ITSsuppSSDExtTrayCopper"); | |
6722 | ||
6723 | totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans | |
6724 | - kTrayThick; | |
6725 | ||
6726 | xprof[0] = -totalhi*TanD(kTrayAZRot); | |
6727 | yprof[0] = kTrayThick; | |
6728 | xprof[1] = kExternalTrayTotalLen; | |
6729 | yprof[1] = yprof[0]; | |
6730 | xprof[2] = xprof[1]; | |
6731 | yprof[2] = yprof[1] + kCopperHeight; | |
6732 | totalhi -= kCopperHeight; | |
6733 | xprof[3] = -totalhi*TanD(kTrayAZRot); | |
6734 | yprof[3] = yprof[2]; | |
6735 | ||
6736 | extCopper->DefinePolygon(4, xprof, yprof); | |
6737 | extCopper->DefineSection(0, 0); | |
6738 | extCopper->DefineSection(1, kServicesWidth); | |
6739 | ||
6740 | // The cable plastic inside the forward tray: a BBox | |
6741 | TGeoBBox *forwPlastic = new TGeoBBox(kServicesWidth/2, | |
6742 | kCablePlasticHeight/2, | |
6743 | kForwardTrayTotalLen/2); | |
6744 | ||
6745 | // The cable plastic inside the forward tray: a Xtru | |
6746 | TGeoXtru *extPlastic = new TGeoXtru(2); | |
6747 | extPlastic->SetName("ITSsuppSSDExtTrayPlastic"); | |
6748 | ||
6749 | totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans | |
6750 | - kTrayThick - kCopperHeight; | |
6751 | ||
6752 | xprof[0] = -totalhi*TanD(kTrayAZRot); | |
6753 | yprof[0] = kTrayThick; | |
6754 | xprof[1] = kExternalTrayTotalLen; | |
6755 | yprof[1] = yprof[0]; | |
6756 | xprof[2] = xprof[1]; | |
6757 | yprof[2] = yprof[1] + kCablePlasticHeight; | |
6758 | totalhi -= kCablePlasticHeight; | |
6759 | xprof[3] = -totalhi*TanD(kTrayAZRot); | |
6760 | yprof[3] = yprof[2]; | |
6761 | ||
6762 | extPlastic->DefinePolygon(4, xprof, yprof); | |
6763 | extPlastic->DefineSection(0, 0); | |
6764 | extPlastic->DefineSection(1, kServicesWidth); | |
6765 | ||
6766 | // The cooling water inside the forward tray: a BBox | |
6767 | TGeoBBox *forwWater = new TGeoBBox(kServicesWidth/2, | |
6768 | kCoolingWaterHeight/2, | |
6769 | kForwardTrayTotalLen/2); | |
6770 | ||
6771 | // The cooling water inside the forward tray: a Xtru | |
6772 | TGeoXtru *extWater = new TGeoXtru(2); | |
6773 | extWater->SetName("ITSsuppSSDExtTrayWater"); | |
6774 | ||
6775 | totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans | |
6776 | - kTrayThick - kCopperHeight - kCablePlasticHeight; | |
6777 | ||
6778 | xprof[0] = -totalhi*TanD(kTrayAZRot); | |
6779 | yprof[0] = kTrayThick; | |
6780 | xprof[1] = kExternalTrayTotalLen; | |
6781 | yprof[1] = yprof[0]; | |
6782 | xprof[2] = xprof[1]; | |
6783 | yprof[2] = yprof[1] + kCoolingWaterHeight; | |
6784 | totalhi -= kCoolingWaterHeight; | |
6785 | xprof[3] = -totalhi*TanD(kTrayAZRot); | |
6786 | yprof[3] = yprof[2]; | |
6787 | ||
6788 | extWater->DefinePolygon(4, xprof, yprof); | |
6789 | extWater->DefineSection(0, 0); | |
6790 | extWater->DefineSection(1, kServicesWidth); | |
6791 | ||
6792 | // The polyurethane inside the forward tray: a BBox | |
6793 | TGeoBBox *forwPUR = new TGeoBBox(kServicesWidth/2, | |
6794 | kPoliUrethaneHeight/2, | |
6795 | kForwardTrayTotalLen/2); | |
6796 | ||
6797 | // The poliurethane inside the forward tray: a Xtru | |
6798 | TGeoXtru *extPUR = new TGeoXtru(2); | |
6799 | extPUR->SetName("ITSsuppSSDExtTrayPUR"); | |
6800 | ||
6801 | totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans | |
6802 | - kTrayThick - kCopperHeight - kCablePlasticHeight | |
6803 | - kCoolingWaterHeight; | |
6804 | ||
6805 | xprof[0] = -totalhi*TanD(kTrayAZRot); | |
6806 | yprof[0] = kTrayThick; | |
6807 | xprof[1] = kExternalTrayTotalLen; | |
6808 | yprof[1] = yprof[0]; | |
6809 | xprof[2] = xprof[1]; | |
6810 | yprof[2] = yprof[1] + kPoliUrethaneHeight; | |
6811 | totalhi -= kPoliUrethaneHeight; | |
6812 | xprof[3] = -totalhi*TanD(kTrayAZRot); | |
6813 | yprof[3] = yprof[2]; | |
6814 | ||
6815 | extPUR->DefinePolygon(4, xprof, yprof); | |
6816 | extPUR->DefineSection(0, 0); | |
6817 | extPUR->DefineSection(1, kServicesWidth); | |
6818 | ||
6819 | ||
6820 | // We have all shapes: now create the real volumes | |
6821 | TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$"); | |
6822 | TGeoMedium *medAntic = mgr->GetMedium("ITS_ANTICORODAL$"); | |
6823 | TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$"); | |
6824 | TGeoMedium *medFEP = mgr->GetMedium("ITS_SSD FEP$"); | |
6825 | TGeoMedium *medH2O = mgr->GetMedium("ITS_WATER$"); | |
6826 | TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$"); | |
6827 | ||
6828 | TGeoVolume *forwTrayFirst = new TGeoVolume("ITSsuppSSDSideAForwTrayFirst", | |
6829 | forwTrayPart1, medAl); | |
6830 | ||
6831 | forwTrayFirst->SetVisibility(kTRUE); | |
6832 | forwTrayFirst->SetLineColor(6); // Purple | |
6833 | forwTrayFirst->SetLineWidth(1); | |
6834 | forwTrayFirst->SetFillColor(forwTrayFirst->GetLineColor()); | |
6835 | forwTrayFirst->SetFillStyle(4000); // 0% transparent | |
6836 | ||
6837 | TGeoVolume *forwTraySecond = new TGeoVolume("ITSsuppSSDSideAForwTraySecond", | |
6838 | forwTrayPart2, medAl); | |
6839 | ||
6840 | forwTraySecond->SetVisibility(kTRUE); | |
6841 | forwTraySecond->SetLineColor(6); // Purple | |
6842 | forwTraySecond->SetLineWidth(1); | |
6843 | forwTraySecond->SetFillColor(forwTraySecond->GetLineColor()); | |
6844 | forwTraySecond->SetFillStyle(4000); // 0% transparent | |
6845 | ||
6846 | TGeoVolume *forwTraySide = new TGeoVolume("ITSsuppSSDSideAForwTraySide", | |
6847 | forwSide, medAl); | |
6848 | ||
6849 | forwTraySide->SetVisibility(kTRUE); | |
6850 | forwTraySide->SetLineColor(6); // Purple | |
6851 | forwTraySide->SetLineWidth(1); | |
6852 | forwTraySide->SetFillColor(forwTraySide->GetLineColor()); | |
6853 | forwTraySide->SetFillStyle(4000); // 0% transparent | |
6854 | ||
6855 | TGeoVolume *forwTraySideCover = new TGeoVolume("ITSsuppSSDSideAForwTraySideCover", | |
6856 | forwSideCover, medAl); | |
6857 | ||
6858 | forwTraySideCover->SetVisibility(kTRUE); | |
6859 | forwTraySideCover->SetLineColor(6); // Purple | |
6860 | forwTraySideCover->SetLineWidth(1); | |
6861 | forwTraySideCover->SetFillColor(forwTraySideCover->GetLineColor()); | |
6862 | forwTraySideCover->SetFillStyle(4000); // 0% transparent | |
6863 | ||
6864 | TGeoVolume *externalTraySSD = new TGeoVolume("ITSsuppSSDSideAExternalTray", | |
6865 | externalTray, medAl); | |
6866 | ||
6867 | externalTraySSD->SetVisibility(kTRUE); | |
6868 | externalTraySSD->SetLineColor(6); // Purple | |
6869 | externalTraySSD->SetLineWidth(1); | |
6870 | externalTraySSD->SetFillColor(externalTraySSD->GetLineColor()); | |
6871 | externalTraySSD->SetFillStyle(4000); // 0% transparent | |
6872 | ||
6873 | TGeoVolume *forwardTrayCover = new TGeoVolume("ITSsuppSSDSideAForwTrayCover", | |
6874 | forwardCover, medAntic); | |
6875 | ||
6876 | forwardTrayCover->SetVisibility(kTRUE); | |
6877 | forwardTrayCover->SetLineColor(kMagenta+1); // Purple | |
6878 | forwardTrayCover->SetLineWidth(1); | |
6879 | forwardTrayCover->SetFillColor(forwardTrayCover->GetLineColor()); | |
6880 | forwardTrayCover->SetFillStyle(4000); // 0% transparent | |
6881 | ||
6882 | TGeoVolume *externTrayCover = new TGeoVolume("ITSsuppSSDSideAExtTrayCover", | |
6883 | externCover, medAntic); | |
6884 | ||
6885 | externTrayCover->SetVisibility(kTRUE); | |
6886 | externTrayCover->SetLineColor(kMagenta+1); // Purple | |
6887 | externTrayCover->SetLineWidth(1); | |
6888 | externTrayCover->SetFillColor(externTrayCover->GetLineColor()); | |
6889 | externTrayCover->SetFillStyle(4000); // 0% transparent | |
6890 | ||
6891 | TGeoVolume *forwCableCu = new TGeoVolume("ITSsuppSSDSideAForwCableCu", | |
6892 | forwCopper, medCu); | |
6893 | ||
6894 | forwCableCu->SetVisibility(kTRUE); | |
6895 | forwCableCu->SetLineColor(kRed); // Red | |
6896 | forwCableCu->SetLineWidth(1); | |
6897 | forwCableCu->SetFillColor(forwCableCu->GetLineColor()); | |
6898 | forwCableCu->SetFillStyle(4000); // 0% transparent | |
6899 | ||
6900 | TGeoVolume *extCableCu = new TGeoVolume("ITSsuppSSDSideAExtCableCu", | |
6901 | extCopper, medCu); | |
6902 | ||
6903 | extCableCu->SetVisibility(kTRUE); | |
6904 | extCableCu->SetLineColor(kRed); // Red | |
6905 | extCableCu->SetLineWidth(1); | |
6906 | extCableCu->SetFillColor(extCableCu->GetLineColor()); | |
6907 | extCableCu->SetFillStyle(4000); // 0% transparent | |
6908 | ||
6909 | TGeoVolume *forwCableFEP = new TGeoVolume("ITSsuppSSDSideAForwCableFEP", | |
6910 | forwPlastic, medFEP); | |
6911 | ||
6912 | forwCableFEP->SetVisibility(kTRUE); | |
6913 | forwCableFEP->SetLineColor(kYellow); // Yellow | |
6914 | forwCableFEP->SetLineWidth(1); | |
6915 | forwCableFEP->SetFillColor(forwCableFEP->GetLineColor()); | |
6916 | forwCableFEP->SetFillStyle(4000); // 0% transparent | |
6917 | ||
6918 | TGeoVolume *extCableFEP = new TGeoVolume("ITSsuppSSDSideAExtCableFEP", | |
6919 | extPlastic, medFEP); | |
6920 | ||
6921 | extCableFEP->SetVisibility(kTRUE); | |
6922 | extCableFEP->SetLineColor(kYellow); // Yellow | |
6923 | extCableFEP->SetLineWidth(1); | |
6924 | extCableFEP->SetFillColor(extCableFEP->GetLineColor()); | |
6925 | extCableFEP->SetFillStyle(4000); // 0% transparent | |
6926 | ||
6927 | TGeoVolume *forwTrayWater = new TGeoVolume("ITSsuppSSDSideAForwTrayWater", | |
6928 | forwWater, medH2O); | |
6929 | ||
6930 | forwTrayWater->SetVisibility(kTRUE); | |
6931 | forwTrayWater->SetLineColor(kBlue); // Blue | |
6932 | forwTrayWater->SetLineWidth(1); | |
6933 | forwTrayWater->SetFillColor(forwTrayWater->GetLineColor()); | |
6934 | forwTrayWater->SetFillStyle(4000); // 0% transparent | |
6935 | ||
6936 | TGeoVolume *extTrayWater = new TGeoVolume("ITSsuppSSDSideAExtTrayWater", | |
6937 | extWater, medH2O); | |
6938 | ||
6939 | extTrayWater->SetVisibility(kTRUE); | |
6940 | extTrayWater->SetLineColor(kBlue); // Blue | |
6941 | extTrayWater->SetLineWidth(1); | |
6942 | extTrayWater->SetFillColor(extTrayWater->GetLineColor()); | |
6943 | extTrayWater->SetFillStyle(4000); // 0% transparent | |
6944 | ||
6945 | TGeoVolume *forwPolyUr = new TGeoVolume("ITSsuppSSDSideAForwPolyUr", | |
6946 | forwPUR, medPUR); | |
6947 | ||
6948 | forwPolyUr->SetVisibility(kTRUE); | |
6949 | forwPolyUr->SetLineColor(kGray); // Gray | |
6950 | forwPolyUr->SetLineWidth(1); | |
6951 | forwPolyUr->SetFillColor(forwPolyUr->GetLineColor()); | |
6952 | forwPolyUr->SetFillStyle(4000); // 0% transparent | |
6953 | ||
6954 | TGeoVolume *extPolyUr = new TGeoVolume("ITSsuppSSDSideAExtPolyUr", | |
6955 | extPUR, medPUR); | |
6956 | ||
6957 | extPolyUr->SetVisibility(kTRUE); | |
6958 | extPolyUr->SetLineColor(kGray); // Gray | |
6959 | extPolyUr->SetLineWidth(1); | |
6960 | extPolyUr->SetFillColor(extPolyUr->GetLineColor()); | |
6961 | extPolyUr->SetFillStyle(4000); // 0% transparent | |
6962 | ||
6963 | ||
6964 | // Now build up the tray | |
573a206f | 6965 | cableTrayAForw->AddNode(forwTrayFirst, 1, 0); |
798b4e0c | 6966 | |
573a206f | 6967 | cableTrayAForw->AddNode(forwTraySecond, 1, |
798b4e0c | 6968 | new TGeoTranslation(0, 0, kForwardTrayFirstLen) ); |
6969 | ||
6970 | xloc = kTrayWidth/2 + kForwardSideThick/2; | |
6971 | yloc = kForwardTrayFirstHeight + kForwardSideHeight/2 - kForwardSideYTrans; | |
6972 | zloc = kForwardSideLength/2; | |
573a206f | 6973 | cableTrayAForw->AddNode(forwTraySide,1, |
798b4e0c | 6974 | new TGeoTranslation( xloc, yloc, zloc) ); |
573a206f | 6975 | cableTrayAForw->AddNode(forwTraySide,2, |
798b4e0c | 6976 | new TGeoTranslation(-xloc, yloc, zloc) ); |
6977 | ||
6978 | yloc = kForwardTrayFirstHeight + kForwardSideHeight - kForwardSideYTrans | |
6979 | - kForwardCoverHeight; | |
573a206f | 6980 | cableTrayAForw->AddNode(forwTraySideCover,1, |
798b4e0c | 6981 | new TGeoTranslation(0, yloc, 0) ); |
6982 | ||
6983 | yloc = kTrayTotalHeight - kCoversYTrans; | |
6984 | zloc = kForwardTrayTotalLen - kForwardCoverLen; | |
573a206f | 6985 | cableTrayAForw->AddNode(forwardTrayCover,1, |
798b4e0c | 6986 | new TGeoTranslation(0, yloc, zloc) ); |
6987 | ||
6988 | yloc = kTrayThick + forwCopper->GetDY(); | |
6989 | zloc = forwCopper->GetDZ(); | |
573a206f | 6990 | cableTrayAForw->AddNode(forwCableCu, 1, |
798b4e0c | 6991 | new TGeoTranslation(0, yloc, zloc) ); |
6992 | ||
6993 | yloc = kTrayThick + kCopperHeight + forwPlastic->GetDY(); | |
6994 | zloc = forwPlastic->GetDZ(); | |
573a206f | 6995 | cableTrayAForw->AddNode(forwCableFEP, 1, |
798b4e0c | 6996 | new TGeoTranslation(0, yloc, zloc) ); |
6997 | ||
6998 | yloc = kTrayThick + kCopperHeight + kCablePlasticHeight + forwWater->GetDY(); | |
6999 | zloc = forwWater->GetDZ(); | |
573a206f | 7000 | cableTrayAForw->AddNode(forwTrayWater, 1, |
798b4e0c | 7001 | new TGeoTranslation(0, yloc, zloc) ); |
7002 | ||
7003 | yloc = kTrayThick + kCopperHeight + kCablePlasticHeight | |
7004 | + kCoolingWaterHeight + forwPUR->GetDY(); | |
7005 | zloc = forwPUR->GetDZ(); | |
573a206f | 7006 | cableTrayAForw->AddNode(forwPolyUr, 1, |
798b4e0c | 7007 | new TGeoTranslation(0, yloc, zloc) ); |
7008 | ||
7009 | // To simplify following placement in MARS, origin is on top | |
7010 | totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans; | |
7011 | ||
7012 | yloc = -totalhi; | |
7013 | cableTrayAExt->AddNode(externalTraySSD, 1, | |
7014 | new TGeoTranslation(0, yloc, 0) ); | |
7015 | ||
7016 | yloc = -totalhi + kTrayTotalHeight - kCoversYTrans; | |
7017 | cableTrayAExt->AddNode(externTrayCover,1, | |
7018 | new TGeoTranslation(0, yloc, 0) ); | |
7019 | ||
7020 | xloc = extCopper->GetDZ(); | |
7021 | yloc = -totalhi; | |
7022 | cableTrayAExt->AddNode(extCableCu,1, | |
7023 | new TGeoCombiTrans( xloc, yloc, 0, | |
7024 | new TGeoRotation("",-90, 90, 90) ) ); | |
7025 | ||
7026 | xloc = extPlastic->GetDZ(); | |
7027 | yloc = -totalhi + kCopperHeight; | |
7028 | cableTrayAExt->AddNode(extCableFEP,1, | |
7029 | new TGeoCombiTrans( xloc, yloc, 0, | |
7030 | new TGeoRotation("",-90, 90, 90) ) ); | |
7031 | ||
7032 | xloc = extWater->GetDZ(); | |
7033 | yloc = -totalhi + kCopperHeight + kCablePlasticHeight; | |
7034 | cableTrayAExt->AddNode(extTrayWater,1, | |
7035 | new TGeoCombiTrans( xloc, yloc, 0, | |
7036 | new TGeoRotation("",-90, 90, 90) ) ); | |
7037 | ||
7038 | xloc = extPUR->GetDZ(); | |
7039 | yloc = -totalhi + kCopperHeight + kCablePlasticHeight + kCoolingWaterHeight; | |
7040 | cableTrayAExt->AddNode(extPolyUr,1, | |
7041 | new TGeoCombiTrans( xloc, yloc, 0, | |
7042 | new TGeoRotation("",-90, 90, 90) ) ); | |
7043 | ||
7044 | ||
7045 | // Finally put everything in the mother volume | |
7046 | zloc = kTrayAZTrans; | |
7047 | Double_t zlocext = zloc + kForwardTrayTotalLen; | |
7048 | Double_t rExtTray = kTrayARTrans + kTrayTotalHeight; | |
7049 | ||
7050 | alpharot = kTrayAFirstRotAng; | |
7051 | xloc = kTrayARTrans*SinD(alpharot); | |
7052 | yloc = kTrayARTrans*CosD(alpharot); | |
573a206f | 7053 | moth->AddNode(cableTrayAForw,1, |
798b4e0c | 7054 | new TGeoCombiTrans( xloc, yloc, zloc, |
7055 | new TGeoRotation("",-alpharot,0,0) ) ); | |
7056 | xloc = rExtTray*SinD(alpharot); | |
7057 | yloc = rExtTray*CosD(alpharot); | |
7058 | moth->AddNode(cableTrayAExt,1, | |
7059 | new TGeoCombiTrans( xloc, yloc, zlocext, | |
7060 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
7061 | ||
7062 | alpharot += 180; | |
7063 | xloc = kTrayARTrans*SinD(alpharot); | |
7064 | yloc = kTrayARTrans*CosD(alpharot); | |
573a206f | 7065 | moth->AddNode(cableTrayAForw,2, |
798b4e0c | 7066 | new TGeoCombiTrans( xloc, yloc, zloc, |
7067 | new TGeoRotation("",-alpharot,0,0) ) ); | |
7068 | xloc = rExtTray*SinD(alpharot); | |
7069 | yloc = rExtTray*CosD(alpharot); | |
7070 | moth->AddNode(cableTrayAExt,2, | |
7071 | new TGeoCombiTrans( xloc, yloc, zlocext, | |
7072 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
7073 | ||
7074 | alpharot = -kTrayAFirstRotAng - 2*kTrayASecondRotAng; | |
7075 | xloc = kTrayARTrans*SinD(alpharot); | |
7076 | yloc = kTrayARTrans*CosD(alpharot); | |
573a206f | 7077 | moth->AddNode(cableTrayAForw,3, |
798b4e0c | 7078 | new TGeoCombiTrans( xloc, yloc, zloc, |
7079 | new TGeoRotation("",-alpharot,0,0) ) ); | |
7080 | xloc = rExtTray*SinD(alpharot); | |
7081 | yloc = rExtTray*CosD(alpharot); | |
7082 | moth->AddNode(cableTrayAExt,3, | |
7083 | new TGeoCombiTrans( xloc, yloc, zlocext, | |
7084 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
7085 | ||
7086 | alpharot += 180; | |
7087 | xloc = kTrayARTrans*SinD(alpharot); | |
7088 | yloc = kTrayARTrans*CosD(alpharot); | |
573a206f | 7089 | moth->AddNode(cableTrayAForw,4, |
798b4e0c | 7090 | new TGeoCombiTrans( xloc, yloc, zloc, |
7091 | new TGeoRotation("",-alpharot,0,0) ) ); | |
7092 | xloc = rExtTray*SinD(alpharot); | |
7093 | yloc = rExtTray*CosD(alpharot); | |
7094 | moth->AddNode(cableTrayAExt,4, | |
7095 | new TGeoCombiTrans( xloc, yloc, zlocext, | |
7096 | new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) ); | |
7097 | ||
7098 | ||
7099 | return; | |
7100 | } | |
7101 | ||
aa177c73 | 7102 | //______________________________________________________________________ |
7103 | void AliITSv11GeometrySupport::SSDCableTraysSideC(TGeoVolume *moth, | |
43aefea7 | 7104 | const TGeoManager *mgr){ |
aa177c73 | 7105 | // |
7106 | // Creates the SSD cable trays which are outside the ITS support cones | |
7107 | // but still inside the TPC on Side C | |
7108 | // (part of this code is taken or anyway inspired to ServicesCableSupport | |
7109 | // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
7110 | // | |
7111 | // Input: | |
7112 | // moth : the TGeoVolume owing the volume structure | |
7113 | // mgr : the GeoManager (default gGeoManager) | |
7114 | // Output: | |
7115 | // | |
7116 | // Created: ??? Bjorn S. Nilsen | |
7117 | // Updated: 15 Apr 2010 Mario Sitta | |
7118 | // | |
7119 | // Technical data are taken from AutoCAD drawings and other (oral) | |
7120 | // information given by F.Tosello | |
7121 | // | |
7122 | ||
7123 | // Dimensions and positions of the C-Side Cable Tray elements | |
7124 | const Int_t kNumTraySideC = 4; | |
7125 | ||
7126 | const Double_t kSideCFoldAngle = 5.00 *fgkDegree; | |
7127 | ||
7128 | const Double_t kServicesWidth = 100.00 *fgkmm; | |
7129 | const Double_t kCopperHeight = 11.20 *fgkmm;// 1120 mm^2 | |
7130 | const Double_t kCablePlasticHeight = 11.50 *fgkmm;// 1150 mm^2 | |
7131 | const Double_t kCoolingWaterHeight = 2.65 *fgkmm;// 265 mm^2 | |
7132 | const Double_t kPoliUrethaneHeight = 4.62 *fgkmm;// 462 mm^2 | |
7133 | ||
7134 | // Overall position and rotation of the C-Side Cable Trays | |
7135 | const Double_t kTraySideCRPos = 45.30 *fgkcm; | |
7136 | const Double_t kTraySideCZPos = -102.40 *fgkcm; | |
7137 | const Double_t kTraySideCAlphaRot[kNumTraySideC] = { 23.0, -59.0, | |
7138 | /* from Patch panel position */ 180.+23.0, 180.-59.0}; | |
7139 | ||
7140 | ||
7141 | // Local variables | |
7142 | Double_t xprof[6], yprof[6]; | |
7143 | Double_t xloc, yloc, alpharot, alphafold; | |
7144 | ||
7145 | ||
7146 | // The assembly holding the metallic structure | |
7147 | TGeoVolumeAssembly *trayStructure = | |
7148 | CreateSDDSSDTraysSideC("ITSsupportSSDTrayC"); | |
7149 | ||
7150 | // The cable copper inside the tray: a Xtru | |
7151 | TGeoXtru *copper = new TGeoXtru(2); | |
7152 | copper->SetName("ITSsuppSSDTrayCCopper"); | |
7153 | ||
7154 | // Copper lies on the lower plate: get position of its points | |
7155 | TGeoXtru *lowerplate = (TGeoXtru*)(mgr->GetVolume("ITSsuppTraySideCLower")->GetShape()); | |
7156 | xprof[0] = lowerplate->GetX(5); | |
7157 | yprof[0] = lowerplate->GetY(5); | |
7158 | xprof[1] = lowerplate->GetX(4); | |
7159 | yprof[1] = lowerplate->GetY(4); | |
7160 | xprof[2] = lowerplate->GetX(3); | |
7161 | yprof[2] = lowerplate->GetY(3); | |
7162 | xprof[3] = xprof[2] - kCopperHeight*SinD(kSideCFoldAngle); | |
7163 | yprof[3] = yprof[2] + kCopperHeight*CosD(kSideCFoldAngle); | |
7164 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
7165 | kCopperHeight , xprof[4], yprof[4]); | |
7166 | xprof[5] = xprof[0]; | |
7167 | yprof[5] = yprof[0] + kCopperHeight; | |
7168 | ||
7169 | copper->DefinePolygon(6, xprof, yprof); | |
7170 | copper->DefineSection(0, -kServicesWidth/2); | |
7171 | copper->DefineSection(1, kServicesWidth/2); | |
7172 | ||
7173 | // The cable plastic inside the tray: a Xtru | |
7174 | TGeoXtru *plastic = new TGeoXtru(2); | |
7175 | plastic->SetName("ITSsuppSSDTrayCPlastic"); | |
7176 | ||
7177 | xprof[0] = copper->GetX(5); | |
7178 | yprof[0] = copper->GetY(5); | |
7179 | xprof[1] = copper->GetX(4); | |
7180 | yprof[1] = copper->GetY(4); | |
7181 | xprof[2] = copper->GetX(3); | |
7182 | yprof[2] = copper->GetY(3); | |
7183 | xprof[3] = xprof[2] - kCablePlasticHeight*SinD(kSideCFoldAngle); | |
7184 | yprof[3] = yprof[2] + kCablePlasticHeight*CosD(kSideCFoldAngle); | |
7185 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
7186 | kCablePlasticHeight , xprof[4], yprof[4]); | |
7187 | xprof[5] = xprof[0]; | |
7188 | yprof[5] = yprof[0] + kCablePlasticHeight; | |
7189 | ||
7190 | plastic->DefinePolygon(6, xprof, yprof); | |
7191 | plastic->DefineSection(0, -kServicesWidth/2); | |
7192 | plastic->DefineSection(1, kServicesWidth/2); | |
7193 | ||
7194 | // The cooling water inside the tray: a Xtru | |
7195 | TGeoXtru *water = new TGeoXtru(2); | |
7196 | water->SetName("ITSsuppSSDTrayCWater"); | |
7197 | ||
7198 | xprof[0] = plastic->GetX(5); | |
7199 | yprof[0] = plastic->GetY(5); | |
7200 | xprof[1] = plastic->GetX(4); | |
7201 | yprof[1] = plastic->GetY(4); | |
7202 | xprof[2] = plastic->GetX(3); | |
7203 | yprof[2] = plastic->GetY(3); | |
7204 | xprof[3] = xprof[2] - kCoolingWaterHeight*SinD(kSideCFoldAngle); | |
7205 | yprof[3] = yprof[2] + kCoolingWaterHeight*CosD(kSideCFoldAngle); | |
7206 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
7207 | kCoolingWaterHeight , xprof[4], yprof[4]); | |
7208 | xprof[5] = xprof[0]; | |
7209 | yprof[5] = yprof[0] + kCoolingWaterHeight; | |
7210 | ||
7211 | water->DefinePolygon(6, xprof, yprof); | |
7212 | water->DefineSection(0, -kServicesWidth/2); | |
7213 | water->DefineSection(1, kServicesWidth/2); | |
7214 | ||
7215 | // The poliurethane inside the tray: a Xtru | |
1c5895a3 | 7216 | TGeoXtru *pur = new TGeoXtru(2); |
7217 | pur->SetName("ITSsuppSSDTrayCPUR"); | |
aa177c73 | 7218 | xprof[0] = water->GetX(5); |
7219 | yprof[0] = water->GetY(5); | |
7220 | xprof[1] = water->GetX(4); | |
7221 | yprof[1] = water->GetY(4); | |
7222 | xprof[2] = water->GetX(3); | |
7223 | yprof[2] = water->GetY(3); | |
7224 | xprof[3] = xprof[2] - kPoliUrethaneHeight*SinD(kSideCFoldAngle); | |
7225 | yprof[3] = yprof[2] + kPoliUrethaneHeight*CosD(kSideCFoldAngle); | |
7226 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
7227 | kPoliUrethaneHeight , xprof[4], yprof[4]); | |
7228 | xprof[5] = xprof[0]; | |
7229 | yprof[5] = yprof[0] + kPoliUrethaneHeight; | |
7230 | ||
1c5895a3 | 7231 | pur->DefinePolygon(6, xprof, yprof); |
7232 | pur->DefineSection(0, -kServicesWidth/2); | |
7233 | pur->DefineSection(1, kServicesWidth/2); | |
aa177c73 | 7234 | |
7235 | ||
7236 | // We have all shapes: now create the real volumes | |
7237 | TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$"); | |
7238 | TGeoMedium *medFEP = mgr->GetMedium("ITS_SSD FEP$"); | |
7239 | TGeoMedium *medH2O = mgr->GetMedium("ITS_WATER$"); | |
7240 | TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$"); | |
7241 | ||
7242 | TGeoVolume *copperCable = new TGeoVolume("ITSsuppSSDSideCCableCu", | |
7243 | copper, medCu); | |
7244 | ||
7245 | copperCable->SetVisibility(kTRUE); | |
7246 | copperCable->SetLineColor(kRed); // Red | |
7247 | copperCable->SetLineWidth(1); | |
7248 | copperCable->SetFillColor(copperCable->GetLineColor()); | |
7249 | copperCable->SetFillStyle(4000); // 0% transparent | |
7250 | ||
7251 | TGeoVolume *cableFEP = new TGeoVolume("ITSsuppSSDSideCCableFEP", | |
7252 | plastic, medFEP); | |
7253 | ||
7254 | cableFEP->SetVisibility(kTRUE); | |
7255 | cableFEP->SetLineColor(kYellow); // Yellow | |
7256 | cableFEP->SetLineWidth(1); | |
7257 | cableFEP->SetFillColor(cableFEP->GetLineColor()); | |
7258 | cableFEP->SetFillStyle(4000); // 0% transparent | |
7259 | ||
7260 | TGeoVolume *trayWater = new TGeoVolume("ITSsuppSSDSideCTrayWater", | |
7261 | water, medH2O); | |
7262 | ||
7263 | trayWater->SetVisibility(kTRUE); | |
7264 | trayWater->SetLineColor(kBlue); // Blue | |
7265 | trayWater->SetLineWidth(1); | |
7266 | trayWater->SetFillColor(trayWater->GetLineColor()); | |
7267 | trayWater->SetFillStyle(4000); // 0% transparent | |
7268 | ||
7269 | TGeoVolume *trayPolyUr = new TGeoVolume("ITSsuppSSDSideCPolyUr", | |
1c5895a3 | 7270 | pur, medPUR); |
aa177c73 | 7271 | |
7272 | trayPolyUr->SetVisibility(kTRUE); | |
7273 | trayPolyUr->SetLineColor(kGray); // Gray | |
7274 | trayPolyUr->SetLineWidth(1); | |
7275 | trayPolyUr->SetFillColor(trayPolyUr->GetLineColor()); | |
7276 | trayPolyUr->SetFillStyle(4000); // 0% transparent | |
7277 | ||
7278 | ||
7279 | // Now fill in the tray | |
7280 | trayStructure->AddNode(copperCable,1,0); | |
7281 | trayStructure->AddNode(cableFEP,1,0); | |
7282 | trayStructure->AddNode(trayWater,1,0); | |
7283 | trayStructure->AddNode(trayPolyUr,1,0); | |
7284 | ||
7285 | ||
7286 | // Finally put everything in the mother volume | |
7287 | alphafold = kSideCFoldAngle; | |
7288 | ||
7289 | for (Int_t jt = 0; jt < kNumTraySideC; jt++) { | |
7290 | alpharot = kTraySideCAlphaRot[jt]; | |
7291 | xloc = kTraySideCRPos*SinD(alpharot); | |
7292 | yloc = kTraySideCRPos*CosD(alpharot); | |
7293 | moth->AddNode(trayStructure,jt+1, | |
7294 | new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos, | |
7295 | new TGeoRotation("",-90.+alpharot,-90.,90.+alphafold))); | |
7296 | } | |
7297 | ||
7298 | ||
7299 | return; | |
7300 | } | |
7301 | ||
798b4e0c | 7302 | //______________________________________________________________________ |
57126ea1 | 7303 | void AliITSv11GeometrySupport::CreateSDDForwardTraySideA(TGeoVolumeAssembly *tray, |
43aefea7 | 7304 | const TGeoManager *mgr){ |
798b4e0c | 7305 | // |
7306 | // Creates the forward SDD tray on Side A (0872/G/D/01) | |
7307 | // | |
7308 | // Input: | |
57126ea1 | 7309 | // tray : the TGeoVolumeAssembly to put the elements in |
798b4e0c | 7310 | // mgr : the GeoManager (used only to get the proper material) |
7311 | // | |
7312 | // Output: | |
7313 | // | |
57126ea1 | 7314 | // Return: |
798b4e0c | 7315 | // |
7316 | // Created: 08 Jan 2010 Mario Sitta | |
57126ea1 | 7317 | // Updated: 07 Sep 2010 Mario Sitta |
798b4e0c | 7318 | // |
7319 | // Technical data are taken from AutoCAD drawings, L.Simonetti technical | |
7320 | // drawings and other (oral) information given by F.Tosello | |
7321 | // | |
7322 | ||
7323 | // Dimensions of the A-Side Forward Cable Tray (0872/G/D/01) | |
7324 | const Double_t kForwardTrayThick = 2.00 *fgkmm; | |
7325 | const Double_t kForwardTraySideLength = 823.00 *fgkmm; | |
7326 | const Double_t kForwardTrayTailLength = 212.00 *fgkmm; | |
7327 | const Double_t kForwardTrayBaseHalfWide = 55.00 *fgkmm; | |
7328 | const Double_t kForwardTrayNotchLength = 47.20 *fgkmm; | |
7329 | const Double_t kForwardTrayNotchHeight = 25.00 *fgkmm; | |
7330 | const Double_t kForwardTrayNotchDown = 10.00 *fgkmm; | |
7331 | const Double_t kForwardTraySide1Height = 39.00 *fgkmm; | |
7332 | const Double_t kForwardTraySide2Height = 26.00 *fgkmm; | |
7333 | const Double_t kForwardTraySide2Expand = 10.50 *fgkmm; | |
7334 | const Double_t kForwardTraySide3TailLen = 418.00 *fgkmm; | |
7335 | const Double_t kForwardTraySide3TailHi = 31.00 *fgkmm; | |
7336 | const Double_t kForwardTraySide3HeadLen = 425.00 *fgkmm; | |
7337 | const Double_t kForwardTraySide3HeadHi = 72.00 *fgkmm; | |
7338 | const Double_t kForwardTrayHorWingWide = 10.50 *fgkmm; | |
7339 | const Double_t kForwardTrayVertWingWide = 15.00 *fgkmm; | |
7340 | ||
7341 | const Int_t kForwardTraySideNpoints = 9; | |
7342 | ||
7343 | ||
7344 | // Local variables | |
7345 | Double_t xprof[kForwardTraySideNpoints], yprof[kForwardTraySideNpoints]; | |
7346 | Double_t ylen, zlen; | |
7347 | Double_t xloc, yloc, zloc; | |
7348 | ||
7349 | ||
7350 | // The tray has a very complex shape, so it is made by assembling | |
57126ea1 | 7351 | // different elements (with some small simplifications) |
798b4e0c | 7352 | |
7353 | // The tray base: a BBox | |
7354 | zlen = (kForwardTraySideLength-kForwardTrayTailLength)/2; | |
7355 | TGeoBBox *trayBase = new TGeoBBox(kForwardTrayBaseHalfWide, | |
7356 | kForwardTrayThick/2, zlen); | |
7357 | ||
7358 | // The first part of the side wall: a Xtru | |
7359 | TGeoXtru *traySide1 = new TGeoXtru(2); | |
7360 | ||
7361 | xprof[0] = 0; | |
7362 | yprof[0] = kForwardTrayThick; | |
7363 | xprof[1] = kForwardTraySideLength-kForwardTrayTailLength; | |
7364 | yprof[1] = yprof[0]; | |
7365 | xprof[2] = kForwardTraySideLength; | |
7366 | yprof[2] = kForwardTraySide1Height + kForwardTrayThick; | |
7367 | xprof[3] = 0; | |
7368 | yprof[3] = yprof[2]; | |
7369 | ||
7370 | traySide1->DefinePolygon(4, xprof, yprof); | |
7371 | traySide1->DefineSection(0, 0); | |
7372 | traySide1->DefineSection(1, kForwardTrayThick); | |
7373 | ||
7374 | // The second part of the side wall: a Xtru | |
7375 | TGeoXtru *traySide2 = new TGeoXtru(2); | |
7376 | ||
7377 | xprof[0] = kForwardTrayBaseHalfWide - kForwardTrayThick; | |
7378 | yprof[0] = traySide1->GetY(2); | |
7379 | xprof[1] = kForwardTrayBaseHalfWide; | |
7380 | yprof[1] = yprof[0]; | |
7381 | xprof[2] = xprof[1] + kForwardTraySide2Expand; | |
7382 | yprof[2] = yprof[1] + kForwardTraySide2Height; | |
7383 | xprof[3] = xprof[2] - kForwardTrayThick; | |
7384 | yprof[3] = yprof[2]; | |
7385 | ||
7386 | traySide2->DefinePolygon(4, xprof, yprof); | |
7387 | traySide2->DefineSection(0, 0); | |
7388 | traySide2->DefineSection(1, kForwardTraySideLength); | |
7389 | ||
7390 | // The third part of the side wall: a Xtru | |
7391 | TGeoXtru *traySide3 = new TGeoXtru(2); | |
7392 | ||
7393 | xprof[0] = 0; | |
7394 | yprof[0] = traySide2->GetY(2); | |
7395 | xprof[1] = kForwardTraySideLength; | |
7396 | yprof[1] = yprof[0]; | |
7397 | xprof[2] = xprof[1]; | |
7398 | yprof[2] = yprof[1] + kForwardTraySide3TailHi - kForwardTrayThick; | |
7399 | xprof[3] = xprof[2] - kForwardTraySide3TailLen - kForwardTrayThick; | |
7400 | yprof[3] = yprof[2]; | |
7401 | xprof[4] = xprof[3]; | |
7402 | yprof[4] = yprof[3] + kForwardTraySide3HeadHi + kForwardTrayThick; | |
7403 | xprof[5] = xprof[4] - kForwardTraySide3HeadLen; | |
7404 | yprof[5] = yprof[4]; | |
7405 | xprof[6] = xprof[5]; | |
7406 | yprof[6] = yprof[5] - kForwardTrayNotchHeight; | |
7407 | xprof[7] = xprof[6] + kForwardTrayNotchLength; | |
7408 | yprof[7] = yprof[6]; | |
7409 | xprof[8] = xprof[7]; | |
7410 | yprof[8] = yprof[7] - kForwardTrayNotchDown; | |
7411 | ||
7412 | traySide3->DefinePolygon(9, xprof, yprof); | |
7413 | traySide3->DefineSection(0, 0); | |
7414 | traySide3->DefineSection(1, kForwardTrayThick); | |
7415 | ||
7416 | // The horizontal wing: a BBox | |
7417 | TGeoBBox *trayHorWing = new TGeoBBox(kForwardTrayHorWingWide/2, | |
7418 | kForwardTrayThick/2, | |
7419 | kForwardTraySide3TailLen/2); | |
7420 | ||
7421 | // The vertical wing: a BBox | |
7422 | ylen = (traySide3->GetY(4) - traySide3->GetY(3))/2; | |
7423 | TGeoBBox *trayVertWing = new TGeoBBox(kForwardTrayVertWingWide/2, | |
7424 | ylen, kForwardTrayThick/2); | |
7425 | ||
7426 | ||
7427 | // We have all shapes: now create the real volumes | |
7428 | TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$"); | |
7429 | ||
7430 | TGeoVolume *forwTrayBase = new TGeoVolume("ITSsuppSDDSideAForwTrayBase", | |
7431 | trayBase, medAl); | |
7432 | ||
7433 | forwTrayBase->SetVisibility(kTRUE); | |
7434 | forwTrayBase->SetLineColor(6); // Purple | |
7435 | forwTrayBase->SetLineWidth(1); | |
7436 | forwTrayBase->SetFillColor(forwTrayBase->GetLineColor()); | |
7437 | forwTrayBase->SetFillStyle(4000); // 0% transparent | |
7438 | ||
7439 | TGeoVolume *forwTraySide1 = new TGeoVolume("ITSsuppSDDSideAForwTraySide1", | |
7440 | traySide1, medAl); | |
7441 | ||
7442 | forwTraySide1->SetVisibility(kTRUE); | |
7443 | forwTraySide1->SetLineColor(6); // Purple | |
7444 | forwTraySide1->SetLineWidth(1); | |
7445 | forwTraySide1->SetFillColor(forwTraySide1->GetLineColor()); | |
7446 | forwTraySide1->SetFillStyle(4000); // 0% transparent | |
7447 | ||
7448 | TGeoVolume *forwTraySide2 = new TGeoVolume("ITSsuppSDDSideAForwTraySide2", | |
7449 | traySide2, medAl); | |
7450 | ||
7451 | forwTraySide2->SetVisibility(kTRUE); | |
7452 | forwTraySide2->SetLineColor(6); // Purple | |
7453 | forwTraySide2->SetLineWidth(1); | |
7454 | forwTraySide2->SetFillColor(forwTraySide2->GetLineColor()); | |
7455 | forwTraySide2->SetFillStyle(4000); // 0% transparent | |
7456 | ||
7457 | TGeoVolume *forwTraySide3 = new TGeoVolume("ITSsuppSDDSideAForwTraySide3", | |
7458 | traySide3, medAl); | |
7459 | ||
7460 | forwTraySide3->SetVisibility(kTRUE); | |
7461 | forwTraySide3->SetLineColor(6); // Purple | |
7462 | forwTraySide3->SetLineWidth(1); | |
7463 | forwTraySide3->SetFillColor(forwTraySide3->GetLineColor()); | |
7464 | forwTraySide3->SetFillStyle(4000); // 0% transparent | |
7465 | ||
7466 | TGeoVolume *forwTrayHWing = new TGeoVolume("ITSsuppSDDSideAForwTrayHorWing", | |
7467 | trayHorWing, medAl); | |
7468 | ||
7469 | forwTrayHWing->SetVisibility(kTRUE); | |
7470 | forwTrayHWing->SetLineColor(6); // Purple | |
7471 | forwTrayHWing->SetLineWidth(1); | |
7472 | forwTrayHWing->SetFillColor(forwTrayHWing->GetLineColor()); | |
7473 | forwTrayHWing->SetFillStyle(4000); // 0% transparent | |
7474 | ||
7475 | TGeoVolume *forwTrayVWing = new TGeoVolume("ITSsuppSDDSideAForwTrayVertWing", | |
7476 | trayVertWing, medAl); | |
7477 | ||
7478 | forwTrayVWing->SetVisibility(kTRUE); | |
7479 | forwTrayVWing->SetLineColor(6); // Purple | |
7480 | forwTrayVWing->SetLineWidth(1); | |
7481 | forwTrayVWing->SetFillColor(forwTrayVWing->GetLineColor()); | |
7482 | forwTrayVWing->SetFillStyle(4000); // 0% transparent | |
7483 | ||
7484 | ||
7485 | // Now build up the tray | |
7486 | yloc = kForwardTrayThick/2; | |
7487 | zloc = zlen; | |
57126ea1 | 7488 | tray->AddNode(forwTrayBase, 1, |
7489 | new TGeoTranslation(0, yloc, zloc) ); | |
798b4e0c | 7490 | |
7491 | xloc = kForwardTrayBaseHalfWide; | |
57126ea1 | 7492 | tray->AddNode(forwTraySide1, 1, |
7493 | new TGeoCombiTrans(xloc, 0, 0, | |
798b4e0c | 7494 | new TGeoRotation("",90,-90,-90))); |
7495 | xloc = -xloc + kForwardTrayThick; | |
57126ea1 | 7496 | tray->AddNode(forwTraySide1, 2, |
7497 | new TGeoCombiTrans(xloc, 0, 0, | |
798b4e0c | 7498 | new TGeoRotation("",90,-90,-90))); |
7499 | ||
57126ea1 | 7500 | tray->AddNode(forwTraySide2, 1, 0); |
798b4e0c | 7501 | zloc = kForwardTraySideLength; |
57126ea1 | 7502 | tray->AddNode(forwTraySide2, 2, |
7503 | new TGeoCombiTrans(0, 0, zloc, | |
798b4e0c | 7504 | new TGeoRotation("",90,-180,-90))); |
7505 | ||
7506 | xloc = kForwardTrayBaseHalfWide + kForwardTraySide2Expand; | |
57126ea1 | 7507 | tray->AddNode(forwTraySide3, 1, |
7508 | new TGeoCombiTrans(xloc, 0, 0, | |
798b4e0c | 7509 | new TGeoRotation("",90,-90,-90))); |
7510 | xloc = -xloc + kForwardTrayThick; | |
57126ea1 | 7511 | tray->AddNode(forwTraySide3, 2, |
7512 | new TGeoCombiTrans(xloc, 0, 0, | |
798b4e0c | 7513 | new TGeoRotation("",90,-90,-90))); |
7514 | ||
7515 | xloc = kForwardTrayBaseHalfWide + kForwardTraySide2Expand | |
7516 | - kForwardTrayHorWingWide/2; | |
7517 | yloc = traySide3->GetY(2) + kForwardTrayThick/2; | |
7518 | zloc = kForwardTraySideLength - trayHorWing->GetDZ(); | |
57126ea1 | 7519 | tray->AddNode(forwTrayHWing, 1, |
7520 | new TGeoTranslation( xloc, yloc, zloc) ); | |
7521 | tray->AddNode(forwTrayHWing, 2, | |
7522 | new TGeoTranslation(-xloc, yloc, zloc) ); | |
798b4e0c | 7523 | |
7524 | xloc = kForwardTrayBaseHalfWide + kForwardTraySide2Expand | |
7525 | - kForwardTrayVertWingWide/2; | |
7526 | yloc = traySide3->GetY(2) + trayVertWing->GetDY(); | |
7527 | zloc = traySide3->GetX(3) + kForwardTrayThick/2; | |
57126ea1 | 7528 | tray->AddNode(forwTrayVWing, 1, |
7529 | new TGeoTranslation( xloc, yloc, zloc) ); | |
7530 | tray->AddNode(forwTrayVWing, 2, | |
7531 | new TGeoTranslation(-xloc, yloc, zloc) ); | |
798b4e0c | 7532 | |
7533 | ||
57126ea1 | 7534 | return; |
798b4e0c | 7535 | } |
7536 | ||
7537 | //______________________________________________________________________ | |
7538 | TGeoCompositeShape* AliITSv11GeometrySupport::CreateTrayAForwardCover(const Double_t coverLen){ | |
7539 | // | |
7540 | // Creates the forward cover of the SDD and SSD cable trays on Side A | |
7541 | // (0872/G/D/02) | |
7542 | // | |
7543 | // Input: | |
7544 | // coverLen: the total length of the cover | |
7545 | // | |
7546 | // Output: | |
7547 | // | |
7548 | // Return: a TGeoCompositeShape for the cover | |
7549 | // | |
7550 | // Created: 03 Jan 2010 Mario Sitta | |
7551 | // | |
7552 | // Technical data are taken from AutoCAD drawings, L.Simonetti technical | |
7553 | // drawings and other (oral) information given by F.Tosello | |
7554 | // | |
7555 | ||
7556 | // Dimensions and positions of the A-Side Cable Tray Forward Cover | |
7557 | // (0872/G/D/02) | |
7558 | const Double_t kForwardCoverWide = 130.00 *fgkmm; | |
7559 | const Double_t kForwardCoverSideWide = 10.00 *fgkmm; | |
7560 | const Double_t kForwardCoverHoleLen = 160.00 *fgkmm; | |
7561 | const Double_t kForwardCoverHoleWide = 90.00 *fgkmm; | |
7562 | const Double_t kForwardCoverHoleR10 = 10.00 *fgkmm; | |
7563 | const Double_t kForwardCoverTotalThick = 5.00 *fgkmm; | |
7564 | const Double_t kForwardCoverSideThick = 3.00 *fgkmm; | |
7565 | const Double_t kForwardCoverInternThick = 2.00 *fgkmm; | |
7566 | ||
7567 | const Double_t kForwardCoverHoleZTrans = 40.00 *fgkmm; | |
7568 | ||
7569 | ||
7570 | // Local variables | |
7571 | Double_t xprof[16], yprof[16]; | |
7572 | Double_t yloc, zloc; | |
7573 | ||
7574 | ||
7575 | // The main shape: a Xtru | |
7576 | TGeoXtru *forwCoverMain = new TGeoXtru(2); | |
7577 | forwCoverMain->SetName("ITSsuppForwCoverMain"); | |
7578 | ||
7579 | xprof[0] = kForwardCoverWide/2; | |
7580 | yprof[0] = kForwardCoverTotalThick; | |
7581 | xprof[1] = xprof[0]; | |
7582 | yprof[1] = yprof[0] - kForwardCoverSideThick; | |
7583 | xprof[2] = xprof[1] - kForwardCoverSideWide; | |
7584 | yprof[2] = yprof[1]; | |
7585 | xprof[3] = xprof[2]; | |
7586 | yprof[3] = 0; | |
7587 | ||
7588 | // We did the right side, now reflex on the left side | |
7589 | for (Int_t jp = 0; jp < 4; jp++) { | |
7590 | xprof[4+jp] = -xprof[3-jp]; | |
7591 | yprof[4+jp] = yprof[3-jp]; | |
7592 | } | |
7593 | ||
7594 | // And now the actual Xtru | |
7595 | forwCoverMain->DefinePolygon(8, xprof, yprof); | |
7596 | forwCoverMain->DefineSection(0, 0); | |
7597 | forwCoverMain->DefineSection(1, coverLen); | |
7598 | ||
7599 | // The hole: another Xtru (rounded corners approximated with segments) | |
7600 | TGeoXtru *forwCoverHole = new TGeoXtru(2); | |
7601 | forwCoverHole->SetName("ITSsuppForwCoverHole"); | |
7602 | ||
7603 | CreateTrayACoverHolesShape(kForwardCoverHoleWide, kForwardCoverHoleLen, | |
7604 | kForwardCoverHoleR10 , xprof, yprof); | |
7605 | ||
7606 | // And now the actual Xtru | |
7607 | forwCoverHole->DefinePolygon(16, xprof, yprof); | |
7608 | forwCoverHole->DefineSection(0, 0); | |
7609 | forwCoverHole->DefineSection(1, kForwardCoverTotalThick-kForwardCoverInternThick); | |
7610 | ||
7611 | // Now the proper rototranslation matrices for the two holes | |
7612 | yloc = kForwardCoverTotalThick-kForwardCoverInternThick-0.01;//Precision fix | |
7613 | zloc = kForwardCoverHoleZTrans; | |
7614 | TGeoCombiTrans *mf1 = new TGeoCombiTrans(0, yloc, zloc, | |
7615 | new TGeoRotation("", 0, 90, 0) ); | |
7616 | mf1->SetName("mf1"); | |
7617 | mf1->RegisterYourself(); | |
7618 | ||
7619 | zloc = coverLen - kForwardCoverHoleZTrans - kForwardCoverHoleLen; | |
7620 | TGeoCombiTrans *mf2 = new TGeoCombiTrans(0, yloc, zloc, | |
7621 | new TGeoRotation("", 0, 90, 0) ); | |
7622 | mf2->SetName("mf2"); | |
7623 | mf2->RegisterYourself(); | |
7624 | ||
7625 | // Finally the actual cover shape | |
7626 | TGeoCompositeShape *cover = new TGeoCompositeShape("ITSsuppForwardCoverMain", | |
7627 | "ITSsuppForwCoverMain-ITSsuppForwCoverHole:mf1-ITSsuppForwCoverHole:mf2"); | |
7628 | ||
7629 | return cover; | |
172b0d90 | 7630 | } |
798b4e0c | 7631 | |
7632 | //______________________________________________________________________ | |
7633 | TGeoCompositeShape* AliITSv11GeometrySupport::CreateTrayAExternalCover(const Double_t coverLen){ | |
7634 | // | |
7635 | // Creates the external cover of the SDD and SSD cable trays on Side A | |
7636 | // (0872/G/D/04) | |
7637 | // | |
7638 | // Input: | |
7639 | // coverLen: the total length of the cover | |
7640 | // | |
7641 | // Output: | |
7642 | // | |
7643 | // Return: a TGeoCompositeShape for the cover | |
7644 | // | |
7645 | // Created: 03 Jan 2010 Mario Sitta | |
7646 | // | |
7647 | // Technical data are taken from AutoCAD drawings, L.Simonetti technical | |
7648 | // drawings and other (oral) information given by F.Tosello | |
7649 | // | |
7650 | ||
7651 | // Dimensions and positions of the A-Side Cable Tray External Cover | |
7652 | // (0872/G/D/04) | |
7653 | const Double_t kExternalCoverWide = 130.00 *fgkmm; | |
7654 | const Double_t kExternalCoverSideWide = 10.00 *fgkmm; | |
7655 | const Double_t kExternalCoverHoleLen1 = 262.00 *fgkmm; | |
7656 | const Double_t kExternalCoverHoleLen2 = 280.00 *fgkmm; | |
7657 | const Double_t kExternalCoverHoleLen3 = 205.00 *fgkmm; | |
7658 | const Double_t kExternalCoverHoleLen4 = 55.00 *fgkmm; | |
7659 | const Double_t kExternalCoverHoleWide = 90.00 *fgkmm; | |
7660 | const Double_t kExternalCoverHoleR10 = 10.00 *fgkmm; | |
7661 | const Double_t kExternalCoverTotalThick = 5.00 *fgkmm; | |
7662 | const Double_t kExternalCoverSideThick = 3.00 *fgkmm; | |
7663 | const Double_t kExternalCoverInternThick = 2.00 *fgkmm; | |
7664 | ||
7665 | const Double_t kExternalCoverHole1ZTrans = 28.00 *fgkmm; | |
7666 | const Double_t kExternalCoverHolesZTrans = 20.00 *fgkmm; | |
7667 | ||
7668 | ||
7669 | // Local variables | |
7670 | Double_t xprof[16], yprof[16]; | |
7671 | Double_t yloc, zloc; | |
7672 | ||
7673 | ||
7674 | // The main shape: a Xtru | |
7675 | TGeoXtru *externCoverMain = new TGeoXtru(2); | |
7676 | externCoverMain->SetName("ITSsuppExternCoverMain"); | |
7677 | ||
7678 | xprof[0] = kExternalCoverWide/2; | |
7679 | yprof[0] = kExternalCoverTotalThick; | |
7680 | xprof[1] = xprof[0]; | |
7681 | yprof[1] = yprof[0] - kExternalCoverSideThick; | |
7682 | xprof[2] = xprof[1] - kExternalCoverSideWide; | |
7683 | yprof[2] = yprof[1]; | |
7684 | xprof[3] = xprof[2]; | |
7685 | yprof[3] = 0; | |
7686 | ||
7687 | // We did the right side, now reflex on the left side | |
7688 | for (Int_t jp = 0; jp < 4; jp++) { | |
7689 | xprof[4+jp] = -xprof[3-jp]; | |
7690 | yprof[4+jp] = yprof[3-jp]; | |
7691 | } | |
7692 | ||
7693 | // And now the actual Xtru | |
7694 | externCoverMain->DefinePolygon(8, xprof, yprof); | |
7695 | externCoverMain->DefineSection(0, 0); | |
7696 | externCoverMain->DefineSection(1, coverLen); | |
7697 | ||
7698 | // The first hole: a Xtru (rounded corners approximated with segments) | |
7699 | Double_t holethick = kExternalCoverTotalThick-kExternalCoverInternThick; | |
7700 | ||
7701 | TGeoXtru *extCoverHole1 = new TGeoXtru(2); | |
7702 | extCoverHole1->SetName("ITSsuppExtCoverHole1"); | |
7703 | ||
7704 | CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen1, | |
7705 | kExternalCoverHoleR10 , xprof, yprof); | |
7706 | ||
7707 | extCoverHole1->DefinePolygon(16, xprof, yprof); | |
7708 | extCoverHole1->DefineSection(0, 0); | |
7709 | extCoverHole1->DefineSection(1, holethick); | |
7710 | ||
7711 | // The second (and third) hole: another Xtru | |
7712 | TGeoXtru *extCoverHole2 = new TGeoXtru(2); | |
7713 | extCoverHole2->SetName("ITSsuppExtCoverHole2"); | |
7714 | ||
7715 | CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen2, | |
7716 | kExternalCoverHoleR10 , xprof, yprof); | |
7717 | ||
7718 | extCoverHole2->DefinePolygon(16, xprof, yprof); | |
7719 | extCoverHole2->DefineSection(0, 0); | |
7720 | extCoverHole2->DefineSection(1, holethick); | |
7721 | ||
7722 | // The fourth hole: another Xtru | |
7723 | TGeoXtru *extCoverHole3 = new TGeoXtru(2); | |
7724 | extCoverHole3->SetName("ITSsuppExtCoverHole3"); | |
7725 | ||
7726 | CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen3, | |
7727 | kExternalCoverHoleR10 , xprof, yprof); | |
7728 | ||
7729 | extCoverHole3->DefinePolygon(16, xprof, yprof); | |
7730 | extCoverHole3->DefineSection(0, 0); | |
7731 | extCoverHole3->DefineSection(1, holethick); | |
7732 | ||
7733 | // The fifth and last hole: another Xtru | |
7734 | TGeoXtru *extCoverHole4 = new TGeoXtru(2); | |
7735 | extCoverHole4->SetName("ITSsuppExtCoverHole4"); | |
7736 | ||
7737 | CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen4, | |
7738 | kExternalCoverHoleR10 , xprof, yprof); | |
7739 | ||
7740 | extCoverHole4->DefinePolygon(16, xprof, yprof); | |
7741 | extCoverHole4->DefineSection(0, 0); | |
7742 | extCoverHole4->DefineSection(1, holethick); | |
7743 | ||
7744 | // Now the proper rototranslation matrices for the holes | |
7745 | yloc = kExternalCoverTotalThick - kExternalCoverInternThick-0.01; | |
7746 | zloc = kExternalCoverHole1ZTrans; | |
7747 | TGeoCombiTrans *me1 = new TGeoCombiTrans(0, yloc, zloc, | |
7748 | new TGeoRotation("", 0, 90, 0) ); | |
7749 | me1->SetName("me1"); | |
7750 | me1->RegisterYourself(); | |
7751 | ||
7752 | zloc += (kExternalCoverHoleLen1 + kExternalCoverHolesZTrans); | |
7753 | TGeoCombiTrans *me2 = new TGeoCombiTrans(0, yloc, zloc, | |
7754 | new TGeoRotation("", 0, 90, 0) ); | |
7755 | me2->SetName("me2"); | |
7756 | me2->RegisterYourself(); | |
7757 | ||
7758 | zloc += (kExternalCoverHoleLen2 + kExternalCoverHolesZTrans); | |
7759 | TGeoCombiTrans *me3 = new TGeoCombiTrans(0, yloc, zloc, | |
7760 | new TGeoRotation("", 0, 90, 0) ); | |
7761 | me3->SetName("me3"); | |
7762 | me3->RegisterYourself(); | |
7763 | ||
7764 | zloc += (kExternalCoverHoleLen2 + kExternalCoverHolesZTrans); | |
7765 | TGeoCombiTrans *me4 = new TGeoCombiTrans(0, yloc, zloc, | |
7766 | new TGeoRotation("", 0, 90, 0) ); | |
7767 | me4->SetName("me4"); | |
7768 | me4->RegisterYourself(); | |
7769 | ||
7770 | zloc += (kExternalCoverHoleLen3 + kExternalCoverHolesZTrans); | |
7771 | TGeoCombiTrans *me5 = new TGeoCombiTrans(0, yloc, zloc, | |
7772 | new TGeoRotation("", 0, 90, 0) ); | |
7773 | me5->SetName("me5"); | |
7774 | me5->RegisterYourself(); | |
7775 | ||
7776 | // Finally the actual cover shape | |
7777 | TGeoCompositeShape *cover = new TGeoCompositeShape("ITSsuppExternCoverMain", | |
7778 | "ITSsuppExternCoverMain-ITSsuppExtCoverHole1:me1-ITSsuppExtCoverHole2:me2-ITSsuppExtCoverHole2:me3-ITSsuppExtCoverHole3:me4-ITSsuppExtCoverHole4:me5"); | |
7779 | ||
7780 | return cover; | |
7781 | } | |
7782 | ||
7783 | //______________________________________________________________________ | |
7784 | void AliITSv11GeometrySupport::CreateTrayACoverHolesShape(const Double_t wide, | |
7785 | const Double_t length, const Double_t r10, | |
7786 | Double_t *x, Double_t *y){ | |
7787 | // | |
7788 | // Creates the proper sequence of X and Y coordinates to determine | |
7789 | // the base XTru polygon for the holes in the SDD and SSD tray covers | |
7790 | // (here the rounded corners are approximated with segments) | |
7791 | // | |
7792 | // Input: | |
7793 | // wide : the hole wide | |
7794 | // length : the hole length | |
7795 | // r10 : the radius of the rounded corners | |
7796 | // | |
7797 | // Output: | |
7798 | // x, y : coordinate vectors [16] | |
7799 | // | |
7800 | // Created: 03 Jan 2010 Mario Sitta | |
7801 | // | |
7802 | // Caller must guarantee that x and y have the correct dimensions | |
7803 | // (but being this a private method it's easy to tell) | |
7804 | // | |
7805 | ||
7806 | x[0] = wide/2 - r10; | |
7807 | y[0] = length; | |
7808 | x[1] = x[0] + r10*SinD(30); | |
7809 | y[1] = y[0] - r10*(1 - CosD(30)); | |
7810 | x[2] = x[0] + r10*SinD(60); | |
7811 | y[2] = y[0] - r10*(1 - CosD(60)); | |
7812 | x[3] = x[0] + r10; | |
7813 | y[3] = y[0] - r10; | |
7814 | x[4] = x[3]; | |
7815 | y[4] = r10; | |
7816 | x[5] = x[4] - r10*(1 - CosD(30)); | |
7817 | y[5] = y[4] - r10*SinD(30); | |
7818 | x[6] = x[4] - r10*(1 - CosD(60)); | |
7819 | y[6] = y[4] - r10*SinD(60); | |
7820 | x[7] = x[4] - r10; | |
7821 | y[7] = 0; | |
7822 | ||
7823 | // We did the right side, now reflex on the left side | |
7824 | for (Int_t jp = 0; jp < 8; jp++) { | |
7825 | x[8+jp] = -x[7-jp]; | |
7826 | y[8+jp] = y[7-jp]; | |
7827 | } | |
7828 | ||
7829 | return; | |
7830 | } | |
7831 | ||
7832 | //______________________________________________________________________ | |
7833 | TGeoXtru* AliITSv11GeometrySupport::CreateSDDSSDTraysSideA( | |
7834 | const Double_t trayLen, | |
7835 | const Double_t trayHi){ | |
7836 | // | |
7837 | // Creates parts of the SDD and SSD Trays on Side A which are identical | |
7838 | // (0872/G/D/03, part of 0872/G/D/07, 0872/G/C/11) | |
7839 | // | |
7840 | // Input: | |
7841 | // trayLen : the length of the tray part | |
7842 | // trayHi : the height of the tray part | |
7843 | // | |
7844 | // Output: | |
7845 | // | |
7846 | // Return: a TGeoXtru | |
7847 | // | |
7848 | // Created: 26 Feb 2010 Mario Sitta | |
7849 | // | |
7850 | // Technical data are taken from AutoCAD drawings, L.Simonetti technical | |
7851 | // drawings and other (oral) information given by F.Tosello | |
7852 | // | |
7853 | ||
7854 | // Dimensions and positions of the A-Side Cable Trays | |
7855 | // (parts of 0872/G/C) | |
7856 | const Double_t kTrayWidth = 130.00 *fgkmm; | |
7857 | const Double_t kTrayWingWidth = 10.00 *fgkmm; | |
7858 | const Double_t kTrayHeightToBend = 20.00 *fgkmm; | |
7859 | const Double_t kTrayThick = 2.00 *fgkmm; | |
7860 | ||
7861 | const Double_t kTrayBendAngle = 22.00 *TMath::DegToRad(); | |
7862 | ||
7863 | const Int_t kTrayNpoints = 16; | |
7864 | ||
7865 | // Local variables | |
7866 | Double_t xprof[kTrayNpoints], yprof[kTrayNpoints]; | |
7867 | ||
7868 | ||
7869 | // The tray shape: a Xtru | |
7870 | TGeoXtru *trayPart = new TGeoXtru(2); | |
7871 | ||
7872 | xprof[2] = kTrayWidth/2 - kTrayThick; | |
7873 | yprof[2] = trayHi - kTrayThick; | |
7874 | xprof[3] = kTrayWidth/2 - kTrayWingWidth; | |
7875 | yprof[3] = yprof[2]; | |
7876 | xprof[4] = xprof[3]; | |
7877 | yprof[4] = trayHi; | |
7878 | xprof[5] = kTrayWidth/2; | |
7879 | yprof[5] = yprof[4]; | |
7880 | xprof[6] = xprof[5]; | |
7881 | yprof[6] = kTrayHeightToBend; | |
7882 | xprof[7] = xprof[6] - yprof[6]*TMath::Tan(kTrayBendAngle); | |
7883 | yprof[7] = 0; | |
7884 | ||
7885 | InsidePoint( xprof[5], yprof[5], xprof[6], yprof[6], xprof[7], yprof[7], | |
7886 | -kTrayThick, xprof[1], yprof[1]); | |
7887 | ||
7888 | xprof[8] = -xprof[7]; | |
7889 | yprof[8] = yprof[7]; | |
7890 | ||
7891 | InsidePoint( xprof[6], yprof[6], xprof[7], yprof[7], xprof[8], yprof[8], | |
7892 | -kTrayThick, xprof[0], yprof[0]); | |
7893 | ||
7894 | // We did the right side, now reflex on the left side | |
7895 | for (Int_t jp = 0; jp < 8; jp++) { | |
7896 | xprof[8+jp] = -xprof[7-jp]; | |
7897 | yprof[8+jp] = yprof[7-jp]; | |
7898 | } | |
7899 | ||
7900 | // And now the actual Xtru | |
7901 | trayPart->DefinePolygon(kTrayNpoints, xprof, yprof); | |
7902 | trayPart->DefineSection(0, 0); | |
7903 | trayPart->DefineSection(1, trayLen); | |
7904 | ||
7905 | ||
7906 | return trayPart; | |
7907 | } | |
7908 | ||
aa177c73 | 7909 | //______________________________________________________________________ |
7910 | TGeoVolumeAssembly* AliITSv11GeometrySupport::CreateSDDSSDTraysSideC( | |
43aefea7 | 7911 | const char *trayName, |
7912 | const TGeoManager *mgr){ | |
aa177c73 | 7913 | |
7914 | // | |
7915 | // Creates the SDD and SSD Trays on Side C which are supposedly identical | |
7916 | // | |
7917 | // Input: | |
7918 | // trayName : the assembly name | |
7919 | // | |
7920 | // Output: | |
7921 | // | |
7922 | // Return: a TGeoVolumeAssembly | |
7923 | // | |
7924 | // Created: 16 Apr 2010 Mario Sitta | |
7925 | // | |
7926 | // Technical data are taken from AutoCAD drawings and other (oral) | |
7927 | // information given by F.Tosello | |
7928 | // | |
7929 | ||
7930 | const Double_t kSideCHalfThick = 0.100 *fgkcm; | |
7931 | const Double_t kSideCFoldAngle = 5.000 *TMath::DegToRad(); | |
7932 | ||
7933 | const Double_t kSideCLength1 = 172.800 *fgkcm; | |
7934 | const Double_t kSideCLength2 = 189.300 *fgkcm; | |
7935 | const Double_t kSideCHalfWide = 6.350 *fgkcm; | |
7936 | const Double_t kSideCHeight1 = 11.800 *fgkcm; | |
7937 | const Double_t kSideCHeight2 = 4.300 *fgkcm; | |
7938 | const Double_t kSideCSideLength1 = 10.800 *fgkcm; | |
7939 | const Double_t kSideCSideLength2 = 63.800 *fgkcm; | |
7940 | const Double_t kSideCSideHeight = 8.800 *fgkcm; | |
7941 | const Int_t kNPointsLowerFace = 6; | |
7942 | const Int_t kNPointsLateralFace = 9; | |
7943 | ||
7944 | const Double_t kSideCWingAHalfLen = 5.000 *fgkcm; | |
7945 | const Double_t kSideCWingBHalfLen = 30.500 *fgkcm; | |
7946 | const Double_t kSideCWingCHalfLen = 2.000 *fgkcm; | |
7947 | const Double_t kSideCWingDHalfLen = 48.500 *fgkcm; | |
7948 | const Double_t kSideCWingEHalfLen = 83.000 *fgkcm; | |
7949 | const Double_t kSideCWingsHalfWide = 0.450 *fgkcm; | |
7950 | ||
7951 | const Int_t kNPointsCoverFace = 12; | |
7952 | ||
7953 | const Double_t kPlateHalfLen = 6.000 *fgkcm; | |
7954 | const Double_t kPlateThick = 0.600 *fgkcm; | |
7955 | const Double_t kPlateHeight = 4.200 *fgkcm; | |
7956 | const Int_t kNPointsPlate = 6; | |
7957 | ||
7958 | const Double_t kBarCoolRmax = 0.4 *fgkcm; | |
7959 | const Int_t kNumBarCool = 2; | |
7960 | const Double_t kXShiftBarCool[kNumBarCool] = { 8.7, 13.0 }; | |
7961 | const Double_t kYShiftBarCool[kNumBarCool] = { 8.5, 5.0 }; | |
7962 | ||
7963 | ||
7964 | // Local variables | |
7965 | Double_t xprof[12], yprof[12]; | |
7966 | Double_t xloc, yloc, zloc, delta, alpharot; | |
7967 | ||
7968 | // The single C-Side Cable tray as an assembly | |
7969 | TGeoVolumeAssembly *cableTrayC = new TGeoVolumeAssembly(trayName); | |
7970 | ||
7971 | // First create all needed shapes | |
7972 | ||
7973 | // The Cable Tray lower face: a Xtru | |
7974 | TGeoXtru *sideCLowerFace = new TGeoXtru(2); | |
7975 | ||
7976 | xprof[0] = 0.; | |
7977 | yprof[0] = 0.; | |
7978 | xprof[1] = kSideCLength1; | |
7979 | yprof[1] = 0.; | |
7980 | xprof[2] = xprof[1] + kSideCLength2*TMath::Cos(kSideCFoldAngle); | |
7981 | yprof[2] = yprof[1] + kSideCLength2*TMath::Sin(kSideCFoldAngle); | |
7982 | xprof[3] = xprof[2] - 2*kSideCHalfThick*TMath::Sin(kSideCFoldAngle); | |
7983 | yprof[3] = yprof[2] + 2*kSideCHalfThick*TMath::Cos(kSideCFoldAngle); | |
7984 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
7985 | 2*kSideCHalfThick , xprof[4], yprof[4]); | |
7986 | xprof[5] = 0.; | |
7987 | yprof[5] = 2*kSideCHalfThick; | |
7988 | ||
7989 | sideCLowerFace->DefinePolygon(kNPointsLowerFace, xprof, yprof); | |
7990 | sideCLowerFace->DefineSection(0,-kSideCHalfWide); | |
7991 | sideCLowerFace->DefineSection(1, kSideCHalfWide); | |
7992 | ||
7993 | // The Cable Tray lateral face: a Xtru | |
7994 | TGeoXtru *sideCLateralFace = new TGeoXtru(2); | |
7995 | ||
7996 | xprof[0] = 0.; | |
7997 | yprof[0] = 0.; | |
7998 | xprof[1] = kSideCLength1; | |
7999 | yprof[1] = 0.; | |
8000 | xprof[2] = xprof[1] + kSideCLength2*TMath::Cos(kSideCFoldAngle); | |
8001 | yprof[2] = yprof[1] + kSideCLength2*TMath::Sin(kSideCFoldAngle); | |
8002 | xprof[3] = xprof[2] - kSideCHeight2*TMath::Sin(kSideCFoldAngle); | |
8003 | yprof[3] = yprof[2] + kSideCHeight2*TMath::Cos(kSideCFoldAngle); | |
8004 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
8005 | kSideCHeight2, xprof[4], yprof[4]); | |
8006 | xprof[5] = kSideCSideLength1 + kSideCSideLength2; | |
8007 | yprof[5] = kSideCHeight2; | |
8008 | xprof[6] = xprof[5]; | |
8009 | yprof[6] = kSideCSideHeight; | |
8010 | xprof[7] = kSideCSideLength1; | |
8011 | yprof[7] = kSideCHeight1; | |
8012 | xprof[8] = 0; | |
8013 | yprof[8] = yprof[7]; | |
8014 | ||
8015 | sideCLateralFace->DefinePolygon(kNPointsLateralFace, xprof, yprof); | |
8016 | sideCLateralFace->DefineSection(0,-kSideCHalfThick); | |
8017 | sideCLateralFace->DefineSection(1, kSideCHalfThick); | |
8018 | ||
8019 | // The lateral wings: four BBox's | |
8020 | TGeoBBox *sideCLateralWingA = new TGeoBBox(kSideCWingAHalfLen, | |
8021 | kSideCHalfThick, | |
8022 | kSideCWingsHalfWide); | |
8023 | ||
8024 | TGeoBBox *sideCLateralWingB = new TGeoBBox(kSideCWingBHalfLen, | |
8025 | kSideCHalfThick, | |
8026 | kSideCWingsHalfWide); | |
8027 | ||
8028 | TGeoBBox *sideCLateralWingC = new TGeoBBox(kSideCHalfThick, // With these | |
8029 | kSideCWingCHalfLen, // X,Y avoid | |
8030 | kSideCWingsHalfWide);//rotations | |
8031 | ||
8032 | TGeoBBox *sideCLateralWingD = new TGeoBBox(kSideCWingDHalfLen, | |
8033 | kSideCHalfThick, | |
8034 | kSideCWingsHalfWide); | |
8035 | ||
8036 | TGeoBBox *sideCLateralWingE = new TGeoBBox(kSideCWingEHalfLen, | |
8037 | kSideCHalfThick, | |
8038 | kSideCWingsHalfWide); | |
8039 | ||
8040 | // The connecting lower plate: a Xtru | |
8041 | TGeoXtru *sideCLowerPlate = new TGeoXtru(2); | |
8042 | ||
8043 | xprof[0] = 0.; | |
8044 | yprof[0] = 0.; | |
8045 | xprof[1] = kPlateHalfLen; | |
8046 | yprof[1] = 0.; | |
8047 | xprof[2] = xprof[1] + kPlateHalfLen*TMath::Cos(kSideCFoldAngle); | |
8048 | yprof[2] = kPlateHalfLen*TMath::Sin(kSideCFoldAngle); | |
8049 | xprof[3] = xprof[2] - kPlateThick*TMath::Sin(kSideCFoldAngle); | |
8050 | yprof[3] = yprof[2] + kPlateThick*TMath::Cos(kSideCFoldAngle); | |
8051 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
8052 | kPlateThick, xprof[4], yprof[4]); | |
8053 | xprof[5] = 0.; | |
8054 | yprof[5] = kPlateThick; | |
8055 | ||
8056 | sideCLowerPlate->DefinePolygon(kNPointsPlate, xprof, yprof); | |
8057 | Double_t zwide = kSideCHalfWide + 2*kSideCHalfThick; | |
8058 | sideCLowerPlate->DefineSection(0,-zwide); | |
8059 | sideCLowerPlate->DefineSection(1, zwide); | |
8060 | ||
8061 | // The connecting side plate: a Xtru | |
8062 | TGeoXtru *sideCLateralPlate = new TGeoXtru(2); | |
8063 | ||
8064 | xprof[0] = 0.; | |
8065 | yprof[0] = 0.; | |
8066 | xprof[1] = kPlateHalfLen; | |
8067 | yprof[1] = 0.; | |
8068 | xprof[2] = xprof[1] + kPlateHalfLen*TMath::Cos(kSideCFoldAngle); | |
8069 | yprof[2] = kPlateHalfLen*TMath::Sin(kSideCFoldAngle); | |
8070 | xprof[3] = xprof[2] - kPlateHeight*TMath::Sin(kSideCFoldAngle); | |
8071 | yprof[3] = yprof[2] + kPlateHeight*TMath::Cos(kSideCFoldAngle); | |
8072 | InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2], | |
8073 | kPlateHeight, xprof[4], yprof[4]); // Avoid small overlap | |
8074 | xprof[5] = 0.; | |
8075 | yprof[5] = kPlateHeight; | |
8076 | ||
8077 | sideCLateralPlate->DefinePolygon(kNPointsPlate, xprof, yprof); | |
8078 | sideCLateralPlate->DefineSection(0,-kPlateThick/2); | |
8079 | sideCLateralPlate->DefineSection(1, kPlateThick/2); | |
8080 | ||
8081 | // The bar fixing the cooling tubes: a Tube | |
8082 | TGeoTube *coolBar = new TGeoTube(0., kBarCoolRmax, kSideCHalfWide); | |
8083 | ||
8084 | // The Cable Tray cover: a (complex) Xtru | |
8085 | TGeoXtru *sideCCoverFace = new TGeoXtru(2); | |
8086 | ||
8087 | xprof[ 0] = sideCLateralFace->GetX(8); | |
8088 | yprof[ 0] = sideCLateralFace->GetY(8); | |
8089 | xprof[ 1] = sideCLateralFace->GetX(7); | |
8090 | yprof[ 1] = sideCLateralFace->GetY(7); | |
8091 | xprof[ 2] = sideCLateralFace->GetX(6); | |
8092 | yprof[ 2] = sideCLateralFace->GetY(6); | |
8093 | xprof[ 3] = sideCLateralFace->GetX(5); | |
8094 | yprof[ 3] = sideCLateralFace->GetY(5); | |
8095 | xprof[ 4] = sideCLateralFace->GetX(4); | |
8096 | yprof[ 4] = sideCLateralFace->GetY(4); | |
8097 | ||
8098 | xloc = (kSideCLength1 + (kSideCSideLength1+kSideCSideLength2))/2; | |
8099 | delta = kSideCLength1 - (xloc + kSideCWingDHalfLen); | |
8100 | xprof[ 5] = xprof[4] | |
8101 | + (delta + 2*kSideCWingEHalfLen)*TMath::Cos(kSideCFoldAngle); | |
8102 | yprof[ 5] = yprof[4] | |
8103 | + (delta + 2*kSideCWingEHalfLen)*TMath::Sin(kSideCFoldAngle); | |
8104 | ||
8105 | xprof[ 6] = xprof[5] - 2*kSideCHalfThick*TMath::Sin(kSideCFoldAngle); | |
8106 | yprof[ 6] = yprof[5] + 2*kSideCHalfThick*TMath::Cos(kSideCFoldAngle); | |
8107 | InsidePoint(xprof[3], yprof[3], xprof[4], yprof[4], xprof[5], yprof[5], | |
8108 | 2*kSideCHalfThick, xprof[7], yprof[7]); | |
8109 | InsidePoint(xprof[2], yprof[2], xprof[3], yprof[3], xprof[4], yprof[4], | |
8110 | 2*kSideCHalfThick, xprof[8], yprof[8]); | |
8111 | xprof[ 9] = xprof[2] + 2*kSideCHalfThick; | |
8112 | yprof[ 9] = yprof[2] + 2*kSideCHalfThick; | |
8113 | xprof[10] = xprof[1]; | |
8114 | yprof[10] = yprof[1] + 2*kSideCHalfThick; | |
8115 | xprof[11] = xprof[0]; | |
8116 | yprof[11] = yprof[0] + 2*kSideCHalfThick; | |
8117 | ||
8118 | sideCCoverFace->DefinePolygon(kNPointsCoverFace, xprof, yprof); | |
8119 | zloc = kSideCHalfWide + 2*kSideCHalfThick + 2*kSideCWingsHalfWide; | |
8120 | sideCCoverFace->DefineSection(0,-zloc); | |
8121 | sideCCoverFace->DefineSection(1, zloc); | |
8122 | ||
8123 | ||
8124 | // We have all shapes: now create the real volumes | |
8125 | TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$"); | |
8126 | ||
8127 | TGeoVolume *traySideCLowerFace = new TGeoVolume("ITSsuppTraySideCLower", | |
8128 | sideCLowerFace, medAl); | |
8129 | ||
8130 | traySideCLowerFace->SetVisibility(kTRUE); | |
8131 | traySideCLowerFace->SetLineColor(6); // Purple | |
8132 | traySideCLowerFace->SetLineWidth(1); | |
8133 | traySideCLowerFace->SetFillColor(traySideCLowerFace->GetLineColor()); | |
8134 | traySideCLowerFace->SetFillStyle(4000); // 0% transparent | |
8135 | ||
8136 | TGeoVolume *traySideCLateralFace = new TGeoVolume("ITSsuppTraySideCLateral", | |
8137 | sideCLateralFace, medAl); | |
8138 | ||
8139 | traySideCLateralFace->SetVisibility(kTRUE); | |
8140 | traySideCLateralFace->SetLineColor(6); // Purple | |
8141 | traySideCLateralFace->SetLineWidth(1); | |
8142 | traySideCLateralFace->SetFillColor(traySideCLateralFace->GetLineColor()); | |
8143 | traySideCLateralFace->SetFillStyle(4000); // 0% transparent | |
8144 | ||
8145 | TGeoVolume *traySideCLateralWingA = | |
8146 | new TGeoVolume("ITSsuppTraySideCLateralWingA", sideCLateralWingA, medAl); | |
8147 | ||
8148 | traySideCLateralWingA->SetVisibility(kTRUE); | |
8149 | traySideCLateralWingA->SetLineColor(6); // Purple | |
8150 | traySideCLateralWingA->SetLineWidth(1); | |
8151 | traySideCLateralWingA->SetFillColor(traySideCLateralWingA->GetLineColor()); | |
8152 | traySideCLateralWingA->SetFillStyle(4000); // 0% transparent | |
8153 | ||
8154 | TGeoVolume *traySideCLateralWingB = | |
8155 | new TGeoVolume("ITSsuppTraySideCLateralWingB", sideCLateralWingB, medAl); | |
8156 | ||
8157 | traySideCLateralWingB->SetVisibility(kTRUE); | |
8158 | traySideCLateralWingB->SetLineColor(6); // Purple | |
8159 | traySideCLateralWingB->SetLineWidth(1); | |
8160 | traySideCLateralWingB->SetFillColor(traySideCLateralWingB->GetLineColor()); | |
8161 | traySideCLateralWingB->SetFillStyle(4000); // 0% transparent | |
8162 | ||
8163 | TGeoVolume *traySideCLateralWingC = | |
8164 | new TGeoVolume("ITSsuppTraySideCLateralWingC", sideCLateralWingC, medAl); | |
8165 | ||
8166 | traySideCLateralWingC->SetVisibility(kTRUE); | |
8167 | traySideCLateralWingC->SetLineColor(6); // Purple | |
8168 | traySideCLateralWingC->SetLineWidth(1); | |
8169 | traySideCLateralWingC->SetFillColor(traySideCLateralWingC->GetLineColor()); | |
8170 | traySideCLateralWingC->SetFillStyle(4000); // 0% transparent | |
8171 | ||
8172 | TGeoVolume *traySideCLateralWingD = | |
8173 | new TGeoVolume("ITSsuppTraySideCLateralWingD", sideCLateralWingD, medAl); | |
8174 | ||
8175 | traySideCLateralWingD->SetVisibility(kTRUE); | |
8176 | traySideCLateralWingD->SetLineColor(6); // Purple | |
8177 | traySideCLateralWingD->SetLineWidth(1); | |
8178 | traySideCLateralWingD->SetFillColor(traySideCLateralWingD->GetLineColor()); | |
8179 | traySideCLateralWingD->SetFillStyle(4000); // 0% transparent | |
8180 | ||
8181 | TGeoVolume *traySideCLateralWingE = | |
8182 | new TGeoVolume("ITSsuppTraySideCLateralWingE", sideCLateralWingE, medAl); | |
8183 | ||
8184 | traySideCLateralWingE->SetVisibility(kTRUE); | |
8185 | traySideCLateralWingE->SetLineColor(6); // Purple | |
8186 | traySideCLateralWingE->SetLineWidth(1); | |
8187 | traySideCLateralWingE->SetFillColor(traySideCLateralWingE->GetLineColor()); | |
8188 | traySideCLateralWingE->SetFillStyle(4000); // 0% transparent | |
8189 | ||
8190 | TGeoVolume *traySideCLowerPlate = | |
8191 | new TGeoVolume("ITSsuppTraySideCLowerPlate", sideCLowerPlate, medAl); | |
8192 | ||
8193 | traySideCLowerPlate->SetVisibility(kTRUE); | |
8194 | traySideCLowerPlate->SetLineColor(6); // Purple | |
8195 | traySideCLowerPlate->SetLineWidth(1); | |
8196 | traySideCLowerPlate->SetFillColor(traySideCLowerPlate->GetLineColor()); | |
8197 | traySideCLowerPlate->SetFillStyle(4000); // 0% transparent | |
8198 | ||
8199 | TGeoVolume *traySideCLateralPlate = | |
8200 | new TGeoVolume("ITSsuppTraySideCLateralPlate", sideCLateralPlate, medAl); | |
8201 | ||
8202 | traySideCLateralPlate->SetVisibility(kTRUE); | |
8203 | traySideCLateralPlate->SetLineColor(6); // Purple | |
8204 | traySideCLateralPlate->SetLineWidth(1); | |
8205 | traySideCLateralPlate->SetFillColor(traySideCLateralPlate->GetLineColor()); | |
8206 | traySideCLateralPlate->SetFillStyle(4000); // 0% transparent | |
8207 | ||
8208 | TGeoVolume *traySideCCoverFace = | |
8209 | new TGeoVolume("ITSsuppTraySideCCoverFace", sideCCoverFace, medAl); | |
8210 | ||
8211 | traySideCCoverFace->SetVisibility(kTRUE); | |
8212 | traySideCCoverFace->SetLineColor(6); // Purple | |
8213 | traySideCCoverFace->SetLineWidth(1); | |
8214 | traySideCCoverFace->SetFillColor(traySideCCoverFace->GetLineColor()); | |
8215 | traySideCCoverFace->SetFillStyle(4000); // 0% transparent | |
8216 | ||
8217 | TGeoVolume *coolingTubeBar = new TGeoVolume("ITSsuppTraySideCCoolBar", | |
8218 | coolBar, medAl); | |
8219 | ||
8220 | coolingTubeBar->SetVisibility(kTRUE); | |
8221 | coolingTubeBar->SetLineColor(6); // Purple | |
8222 | coolingTubeBar->SetLineWidth(1); | |
8223 | coolingTubeBar->SetFillColor(coolingTubeBar->GetLineColor()); | |
8224 | coolingTubeBar->SetFillStyle(4000); // 0% transparent | |
8225 | ||
8226 | ||
8227 | // Now build up the tray | |
8228 | cableTrayC->AddNode(traySideCLowerFace,1,0); | |
8229 | ||
8230 | zloc = kSideCHalfWide + kSideCHalfThick; | |
8231 | cableTrayC->AddNode(traySideCLateralFace,1, | |
8232 | new TGeoTranslation(0., 0., zloc) ); | |
8233 | cableTrayC->AddNode(traySideCLateralFace,2, | |
8234 | new TGeoTranslation(0., 0.,-zloc) ); | |
8235 | ||
8236 | xloc = kSideCWingAHalfLen; | |
8237 | yloc = kSideCHeight1 - kSideCHalfThick; | |
8238 | zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide; | |
8239 | cableTrayC->AddNode(traySideCLateralWingA,1, | |
8240 | new TGeoTranslation(xloc, yloc, zloc) ); | |
8241 | cableTrayC->AddNode(traySideCLateralWingA,2, | |
8242 | new TGeoTranslation(xloc, yloc,-zloc) ); | |
8243 | ||
8244 | xloc = kSideCSideLength1 + kSideCSideLength2/2; | |
8245 | yloc = Yfrom2Points(kSideCSideLength1,kSideCHeight1, | |
8246 | kSideCSideLength1+kSideCSideLength2,kSideCSideHeight, | |
8247 | xloc) - kSideCHalfThick -0.0012; // Avoid small overlap | |
8248 | zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide; | |
8249 | alpharot = (-(kSideCHeight1 - kSideCSideHeight)/kSideCSideLength2 )* | |
8250 | TMath::RadToDeg(); | |
8251 | cableTrayC->AddNode(traySideCLateralWingB,1, | |
8252 | new TGeoCombiTrans(xloc, yloc, zloc, | |
8253 | new TGeoRotation("",alpharot,0,0) ) ); | |
8254 | cableTrayC->AddNode(traySideCLateralWingB,2, | |
8255 | new TGeoCombiTrans(xloc, yloc,-zloc, | |
8256 | new TGeoRotation("",alpharot,0,0) ) ); | |
8257 | ||
8258 | xloc = kSideCSideLength1 + kSideCSideLength2 - kSideCHalfThick; | |
8259 | yloc = kSideCSideHeight - kSideCWingCHalfLen; | |
8260 | zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide; | |
8261 | cableTrayC->AddNode(traySideCLateralWingC,1, | |
8262 | new TGeoTranslation(xloc, yloc, zloc) ); | |
8263 | cableTrayC->AddNode(traySideCLateralWingC,2, | |
8264 | new TGeoTranslation(xloc, yloc,-zloc) ); | |
8265 | ||
8266 | xloc = (kSideCLength1 + (kSideCSideLength1+kSideCSideLength2))/2; | |
8267 | yloc = kSideCHeight2 - kSideCHalfThick; | |
8268 | zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide; | |
8269 | cableTrayC->AddNode(traySideCLateralWingD,1, | |
8270 | new TGeoTranslation(xloc, yloc, zloc) ); | |
8271 | cableTrayC->AddNode(traySideCLateralWingD,2, | |
8272 | new TGeoTranslation(xloc, yloc,-zloc) ); | |
8273 | ||
8274 | delta = kSideCLength1 - (xloc + kSideCWingDHalfLen); | |
8275 | xloc = kSideCLength1 + delta + kSideCWingEHalfLen; | |
8276 | yloc = (xloc - kSideCLength1)*TMath::Tan(kSideCFoldAngle) + | |
8277 | kSideCHeight2*TMath::Cos(kSideCFoldAngle) - kSideCHalfThick; | |
8278 | zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide; | |
8279 | alpharot = kSideCFoldAngle*TMath::RadToDeg(); | |
8280 | cableTrayC->AddNode(traySideCLateralWingE,1, | |
8281 | new TGeoCombiTrans(xloc, yloc, zloc, | |
8282 | new TGeoRotation("",alpharot,0,0) ) ); | |
8283 | cableTrayC->AddNode(traySideCLateralWingE,2, | |
8284 | new TGeoCombiTrans(xloc, yloc,-zloc, | |
8285 | new TGeoRotation("",alpharot,0,0) ) ); | |
8286 | ||
8287 | xloc = kSideCLength1 - kPlateHalfLen; | |
8288 | yloc = -kPlateThick -0.0025; // Avoid small overlap | |
8289 | cableTrayC->AddNode(traySideCLowerPlate,1, | |
8290 | new TGeoTranslation(xloc, yloc, 0.) ); | |
8291 | ||
8292 | xloc = kSideCLength1 - kPlateHalfLen; | |
8293 | yloc = -kPlateThick; | |
8294 | zloc = kSideCHalfWide + 2*kSideCHalfThick + kPlateThick/2; | |
8295 | cableTrayC->AddNode(traySideCLateralPlate,1, | |
8296 | new TGeoTranslation(xloc, yloc, zloc) ); | |
8297 | cableTrayC->AddNode(traySideCLateralPlate,2, | |
8298 | new TGeoTranslation(xloc, yloc,-zloc) ); | |
8299 | ||
8300 | for (Int_t jc = 0; jc <kNumBarCool; jc++) { | |
8301 | xloc = kXShiftBarCool[jc]; | |
8302 | yloc = kYShiftBarCool[jc]; | |
8303 | cableTrayC->AddNode(coolingTubeBar,jc+1, | |
8304 | new TGeoTranslation(xloc, yloc, 0.) ); | |
8305 | } | |
8306 | ||
8307 | cableTrayC->AddNode(traySideCCoverFace,1,0); | |
8308 | ||
8309 | ||
8310 | // Finally return what we made up | |
8311 | ||
8312 | return cableTrayC; | |
8313 | } | |
8314 | ||
f0a991bf | 8315 | //______________________________________________________________________ |
8316 | void AliITSv11GeometrySupport::ITSTPCSupports(TGeoVolume *moth, | |
43aefea7 | 8317 | const TGeoManager *mgr){ |
f0a991bf | 8318 | // |
8319 | // Creates the elements suspending the ITS to the TPC and other fixed | |
8320 | // elements used to hook the rails (0872/C and its daughters) | |
8321 | // | |
8322 | // moth : the TGeoVolume owing the volume structure | |
8323 | // mgr : the GeoManager (default gGeoManager) | |
8324 | // Output: | |
8325 | // | |
8326 | // Return: | |
8327 | // | |
8328 | // Created: 28 Oct 2010 Mario Sitta | |
8329 | // | |
8330 | // Technical data are taken from AutoCAD drawings, L.Simonetti technical | |
8331 | // drawings and other (oral) information given by F.Tosello | |
8332 | // | |
8333 | ||
8334 | // Dimensions and positions of the half ring C2/C3 (0872/C/04) | |
8335 | const Double_t kRingCZPos = 733.000*fgkmm; | |
8336 | ||
8337 | const Double_t kRingCThick = 12.000*fgkmm; | |
8338 | const Double_t kRingCRmin = 565.000*fgkmm; | |
8339 | const Double_t kRingCRmax = 592.000*fgkmm; | |
8340 | const Double_t kRingCHeight = 560.000*fgkmm; | |
8341 | const Double_t kRingCXToInsert = 515.000*fgkmm; | |
8342 | const Double_t kRingCYToInsert = 113.000*fgkmm; | |
8343 | ||
8344 | const Int_t kNumberOfRingPoints = 23; // N.points to approximate arc | |
8345 | ||
8346 | // Dimensions of the forward upper hook (0872/C/09) | |
8347 | const Double_t kForwUpHookThick = 20.000*fgkmm; | |
8348 | const Double_t kForwUpHookRext = 590.000*fgkmm; | |
8349 | const Double_t kForwUpHookRint = 20.000*fgkmm; | |
8350 | const Double_t kForwUpHookHiTot = 89.000*fgkmm; | |
8351 | const Double_t kForwUpHookHiInt = 59.000*fgkmm; | |
8352 | const Double_t kForwUpHookWide = 96.000*fgkmm; | |
8353 | const Double_t kForwUpHookHalfBase = 25.000*fgkmm; | |
8354 | const Double_t kForwUpHookBaseCut = 10.000*fgkmm; | |
8355 | const Double_t kForwUpHookHoleWide = 25.000*fgkmm; | |
8356 | const Double_t kForwUpHookHoleHi = 22.500*fgkmm; | |
8357 | const Double_t kForwUpHookHoleBase = 5.000*fgkmm; | |
8358 | const Double_t kForwUpHookHoleR5 = 5.000*fgkmm; | |
8359 | const Double_t kForwUpHookHoleY = 8.000*fgkmm; | |
8360 | const Double_t kForwUpHookHollowHi = 35.000*fgkmm; | |
8361 | const Double_t kForwUpHookHollowWide= 5.000*fgkmm; | |
8362 | ||
8363 | const Int_t kNumberOfForwUpHookPts = 11; | |
8364 | const Int_t kNumbOfForwUpHookHolePts= 5; | |
8365 | ||
8366 | // Dimensions of the forward lower hook (0872/C/08) | |
8367 | const Double_t kForwLwHookThick = 20.000*fgkmm; | |
8368 | const Double_t kForwLwHookRext = 590.000*fgkmm; | |
8369 | const Double_t kForwLwHookRint = 20.000*fgkmm; | |
8370 | const Double_t kForwLwHookHiTot = 88.500*fgkmm; | |
8371 | const Double_t kForwLwHookWide = 96.000*fgkmm; | |
8372 | const Double_t kForwLwHookHalfBase = 25.000*fgkmm; | |
8373 | const Double_t kForwLwHookBaseCut = 10.000*fgkmm; | |
8374 | const Double_t kForwLwHookYToHollow = 3.500*fgkmm; | |
8375 | const Double_t kForwLwHookHoleR = 7.500*fgkmm; | |
8376 | const Double_t kForwLwHookHoleIntHi = 35.000*fgkmm; | |
8377 | const Double_t kForwLwHookHoleYPos = 13.500*fgkmm; | |
8378 | const Double_t kForwLwHookHollowHi = 62.000*fgkmm; | |
8379 | const Double_t kForwLwHookHollowWide= 5.000*fgkmm; | |
8380 | ||
8381 | const Int_t kNumberOfForwLwHookPts = 11; | |
8382 | const Int_t kNumbOfForwLwHookHolePts= 7; | |
8383 | ||
8384 | // Dimensions of the rear upper hook (0872/C/10) | |
8385 | const Double_t kRearUpHookThick = 15.000*fgkmm; | |
8386 | const Double_t kRearUpHookRext = 590.000*fgkmm; | |
8387 | const Double_t kRearUpHookRint = 20.000*fgkmm; | |
8388 | const Double_t kRearUpHookHiTot = 53.500*fgkmm; | |
8389 | const Double_t kRearUpHookHiInt = 23.500*fgkmm; | |
8390 | const Double_t kRearUpHookWide = 96.000*fgkmm; | |
8391 | const Double_t kRearUpHookHalfBase = 25.000*fgkmm; | |
8392 | const Double_t kRearUpHookHoleWide = 25.000*fgkmm; | |
8393 | const Double_t kRearUpHookHoleHi = 22.500*fgkmm; | |
8394 | const Double_t kRearUpHookHoleBase = 5.000*fgkmm; | |
8395 | const Double_t kRearUpHookHoleR5 = 5.000*fgkmm; | |
8396 | const Double_t kRearUpHookHoleY = 8.000*fgkmm; | |
8397 | ||
8398 | const Int_t kNumberOfRearUpHookPts = 10; | |
8399 | const Int_t kNumbOfRearUpHookHolePts= 5; | |
8400 | ||
8401 | // Dimensions of the forward lower hook (0872/C/11) | |
8402 | const Double_t kRearLwHookThick = 20.000*fgkmm; | |
8403 | const Double_t kRearLwHookRext = 590.000*fgkmm; | |
8404 | const Double_t kRearLwHookHiTot = 30.000*fgkmm; | |
8405 | const Double_t kRearLwHookWide = 96.000*fgkmm; | |
8406 | ||
8407 | const Int_t kNumberOfRearLwHookPts = 3; | |
8408 | ||
8409 | // Dimensions of the rear lower brackets (0872/C/16) | |
8410 | const Double_t kRearLwBracketThick = 15.000*fgkmm; | |
8411 | const Double_t kRearLwBracketHi1 = 42.000*fgkmm; | |
8412 | const Double_t kRearLwBracketHi2 = 12.000*fgkmm; | |
8413 | const Double_t kRearLwBracketWide1 = 34.000*fgkmm; | |
8414 | const Double_t kRearLwBracketWide2 = 10.000*fgkmm; | |
8415 | // const Double_t kRearLwBracketR5 = 5.000*fgkmm | |
8416 | ||
8417 | // Dimensions of the forward webcam supports (0872/C/V/01-03-04) | |
8418 | const Double_t kForwWebSStirrDep = 20.000*fgkmm; | |
8419 | const Double_t kForwWebSStirrLen1 = 15.000*fgkmm; | |
8420 | const Double_t kForwWebSStirrLen2 = 55.000*fgkmm; | |
8421 | const Double_t kForwWebSStirrLen3 = 10.000*fgkmm; | |
8422 | const Double_t kForwWebSStirrWide1 = 45.000*fgkmm; | |
8423 | const Double_t kForwWebSStirrWide2 = 38.000*fgkmm; | |
8424 | const Double_t kForwWebSStirrWide3 = 23.000*fgkmm; | |
8425 | const Double_t kForwWebTStirrThick = 5.000*fgkmm; | |
8426 | const Double_t kForwWebTStirrWide1 = 30.000*fgkmm; | |
8427 | const Double_t kForwWebTStirrWide2 = 10.000*fgkmm; | |
8428 | const Double_t kForwWebTStirrTotLen3= 58.500*fgkmm; | |
8429 | const Double_t kForwWebTStirrTotLen4= 36.000*fgkmm; | |
8430 | const Double_t kForwWebTStirrLen1 = 10.000*fgkmm; | |
8431 | ||
8432 | // Dimensions of the forward and rear webcam clamps (0872/C/V/02) | |
8433 | const Double_t kFRWebClampThick = 10.000*fgkmm; | |
8434 | const Double_t kFRWebClampExtWide = 30.000*fgkmm; | |
8435 | const Double_t kFRWebClampIntWide = 18.000*fgkmm; | |
8436 | const Double_t kFRWebClampExtHi = 22.000*fgkmm; | |
8437 | const Double_t kFRWebClampIntHi = 17.000*fgkmm; | |
8438 | ||
8439 | // Dimensions of the webcam itself | |
8440 | const Double_t kWebcamLength = 35.000*fgkmm;//ESTIMATED!!! | |
8441 | ||
8442 | // Dimensions of the rear upper webcam supports (0872/C/V/05-06) | |
8443 | const Double_t kRearUpWebStirrWide = 71.000*fgkmm; | |
8444 | const Double_t kRearUpWebStirrDep = 15.000*fgkmm; | |
8445 | const Double_t kRearUpWebStirrThick = 5.000*fgkmm; | |
8446 | const Double_t kRearUpWebStirrH1 = 27.000*fgkmm; | |
8447 | const Double_t kRearUpWebStirrH2 = 32.000*fgkmm; | |
8448 | const Double_t kRearUpWebBarLen = 130.000*fgkmm; | |
8449 | const Double_t kRearUpWebBarHi = 20.000*fgkmm; | |
8450 | const Double_t kRearUpWebBarThick = 5.000*fgkmm; | |
8451 | ||
8452 | // Dimensions of the upper wheel slides (0872/C/Z/00-01-02) | |
8453 | const Double_t kUpperSlideTotHeight = 93.500*fgkmm; | |
8454 | const Double_t kUpperSlideBlockHi = 62.500*fgkmm; | |
8455 | const Double_t kUpperSlideWidth = 36.000*fgkmm; | |
8456 | const Double_t kUpperSlideTotDepth = 51.000*fgkmm; | |
8457 | const Double_t kUpperSlideIntDepth = 36.000*fgkmm; | |
8458 | const Double_t kUpperSlideStubHi = 15.000*fgkmm; | |
8459 | const Double_t kUpperSlideStubDep = 8.000*fgkmm; | |
8460 | const Double_t kUpperSlideWheelHi = 18.500*fgkmm; | |
8461 | const Double_t kUpperSlideHoleRout = 11.000*fgkmm; | |
8462 | const Double_t kUpperSlideHoleRint1 = 9.000*fgkmm; | |
8463 | const Double_t kUpperSlideHoleRint2 = 11.500*fgkmm; | |
8464 | const Double_t kUpperSlideHoleH1 = 7.000*fgkmm; | |
8465 | const Double_t kUpperSlideHoleH2 = 46.000*fgkmm; | |
8466 | const Double_t kUpperSlideHoleH3 = 1.100*fgkmm; | |
8467 | const Double_t kUpperSlideHoleXPos = 20.000*fgkmm; | |
8468 | const Double_t kUpperSlidePinRmin = 4.000*fgkmm; | |
8469 | const Double_t kUpperSlidePinRmax = 6.000*fgkmm; | |
8470 | const Double_t kUpperSlidePinH1 = 7.000*fgkmm; | |
8471 | const Double_t kUpperSlidePinH2 = 46.000*fgkmm; | |
8472 | const Double_t kUpperSlidePinH3 = 25.500*fgkmm; | |
8473 | ||
8474 | // Dimensions of the lower wheel slides (0872/C/W/00-01-02-03) | |
8475 | const Double_t kLowerSlideTotHeight = 80.000*fgkmm; | |
8476 | const Double_t kLowerSlideBlockHi = 28.000*fgkmm; | |
8477 | const Double_t kLowerSlideWidth = 36.000*fgkmm; | |
8478 | const Double_t kLowerSlideTotDepth = 60.000*fgkmm; | |
8479 | const Double_t kLowerSlideHoleRout = 9.500*fgkmm; | |
8480 | const Double_t kLowerSlideHoleRint = 4.700*fgkmm; | |
8481 | const Double_t kLowerSlideHoleH1 = 12.000*fgkmm; | |
8482 | const Double_t kLowerSlideNoseBase = 40.000*fgkmm; | |
8483 | const Double_t kLowerSlideNoseBasHi = 6.000*fgkmm;//Computed | |
8484 | const Double_t kLowerSlideNoseUpWid = 25.000*fgkmm; | |
8485 | const Double_t kLowerSlideNoseDepth = 10.000*fgkmm; | |
8486 | const Double_t kLowerSlidePinRmin = 3.000*fgkmm; | |
8487 | const Double_t kLowerSlidePinRmax = 4.000*fgkmm; | |
8488 | const Double_t kLowerSlidePinH1 = 12.000*fgkmm; | |
8489 | const Double_t kLowerSlidePinH2 = 10.000*fgkmm; | |
8490 | ||
8491 | ||
8492 | // Local variables | |
8493 | Double_t xprof[2*kNumberOfRingPoints],yprof[2*kNumberOfRingPoints]; | |
8494 | Double_t xpos, ypos, zpos, alpha; | |
8495 | ||
8496 | ||
8497 | // First create all needed shapes | |
8498 | ||
8499 | // The Supporting Ring (0872/C/04): a really complex Xtru | |
8500 | // to approximate the arc with a polyline | |
8501 | TGeoXtru *ringC2C3 = new TGeoXtru(2); | |
8502 | ||
8503 | for (Int_t j=0; j<11; j++) { // The external arc | |
8504 | xprof[j] = kRingCRmax*SinD(90*j/10); | |
8505 | yprof[j] = kRingCRmax*CosD(90*j/10); | |
8506 | } | |
8507 | ||
8508 | xprof[11] = kRingCRmin; | |
8509 | yprof[11] = yprof[10]; | |
8510 | ||
8511 | alpha = TMath::ASin(kRingCYToInsert/kRingCRmin); // Now the insert | |
8512 | xprof[12] = kRingCRmin*TMath::Cos(alpha/2); | |
8513 | yprof[12] = kRingCRmin*TMath::Sin(alpha/2); | |
8514 | xprof[13] = kRingCRmin*TMath::Cos(alpha); | |
8515 | yprof[13] = kRingCRmin*TMath::Sin(alpha); | |
8516 | ||
8517 | xprof[14] = kRingCXToInsert; | |
8518 | yprof[14] = yprof[13]; | |
8519 | ||
8520 | alpha = TMath::ACos(kRingCXToInsert/kRingCRmin); // The insert ending angle | |
8521 | xprof[15] = kRingCRmin*TMath::Cos(alpha); | |
8522 | yprof[15] = kRingCRmin*TMath::Sin(alpha); | |
8523 | ||
8524 | for (Int_t j=7; j>1; j--) { // The internal arc | |
8525 | xprof[23-j] = kRingCRmin*SinD(90*j/10); | |
8526 | yprof[23-j] = kRingCRmin*CosD(90*j/10); | |
8527 | } | |
8528 | ||
8529 | alpha = TMath::ASin(kRingCHeight/kRingCRmin); // The angle till the notch | |
8530 | xprof[22] = kRingCRmin*TMath::Cos(alpha); | |
8531 | yprof[22] = kRingCRmin*TMath::Sin(alpha); | |
8532 | ||
8533 | xprof[23] = xprof[0]; | |
8534 | yprof[23] = yprof[22]; | |
8535 | ||
8536 | // We did the right side, now reflex on the left side | |
8537 | for (Int_t jp = 0; jp < 22; jp++) { | |
8538 | xprof[24+jp] = -xprof[23-1-jp]; | |
8539 | yprof[24+jp] = yprof[23-1-jp]; | |
8540 | } | |
8541 | ||
8542 | // wow! now the actual Xtru | |
8543 | ringC2C3->DefinePolygon(2*kNumberOfRingPoints, xprof, yprof); | |
8544 | ringC2C3->DefineSection(0, 0); | |
8545 | ringC2C3->DefineSection(1, kRingCThick); | |
8546 | ||
8547 | // The Forward Upper Hook (0872/C/09): a Composite Shape made of | |
8548 | // a really complex Xtru to approximate the arc with a polyline, | |
8549 | // another Xtru for the hole, and a BBox for the hollow | |
8550 | // The main body | |
8551 | TGeoXtru *forwUpHookMainBody = new TGeoXtru(2); | |
8552 | forwUpHookMainBody->SetName("ITSforwUpHookMainBody"); | |
8553 | ||
8554 | xprof[ 0] = kForwUpHookHalfBase - kForwUpHookBaseCut; | |
8555 | yprof[ 0] = kForwUpHookRext - kForwUpHookHiTot; | |
8556 | xprof[ 1] = kForwUpHookHalfBase; | |
8557 | yprof[ 1] = yprof[0] + kForwUpHookBaseCut; | |
8558 | xprof[ 2] = xprof[1]; | |
8559 | yprof[ 2] = yprof[0] + (kForwUpHookHiInt - kForwUpHookRint); | |
8560 | for (Int_t j=1; j<6; j++) { | |
8561 | xprof[2+j] = xprof[2] + kForwUpHookRint*(1 - CosD(90*j/5)); | |
8562 | yprof[2+j] = yprof[2] + kForwUpHookRint*SinD(90*j/5); | |
8563 | } | |
8564 | xprof[ 8] = kForwUpHookWide/2; | |
8565 | yprof[ 8] = yprof[7]; | |
8566 | xprof[ 9] = xprof[8]; | |
8567 | alpha = TMath::ASin(0.5*kForwUpHookWide/kForwUpHookRext); | |
8568 | yprof[ 9] = kForwUpHookRext*TMath::Cos(alpha); | |
8569 | xprof[10] = kForwUpHookRext*TMath::Sin(alpha/2); | |
8570 | yprof[10] = kForwUpHookRext*TMath::Cos(alpha/2); | |
8571 | xprof[11] = 0; | |
8572 | yprof[11] = kForwUpHookRext; | |
8573 | ||
8574 | // We did the right side, now reflex on the left side | |
8575 | for (Int_t jp = 0; jp < kNumberOfForwUpHookPts; jp++) { | |
8576 | xprof[12+jp] = -xprof[10-jp]; | |
8577 | yprof[12+jp] = yprof[10-jp]; | |
8578 | } | |
8579 | ||
8580 | // Now the actual Xtru | |
8581 | forwUpHookMainBody->DefinePolygon(2*kNumberOfForwUpHookPts+1, xprof, yprof); | |
8582 | forwUpHookMainBody->DefineSection(0, 0); | |
8583 | forwUpHookMainBody->DefineSection(1, kForwUpHookThick); | |
8584 | ||
8585 | // The hole | |
8586 | TGeoXtru *forwUpHookHole = new TGeoXtru(2); | |
8587 | forwUpHookHole->SetName("ITSforwUpHookHole"); | |
8588 | ||
8589 | xprof[0] = kForwUpHookHoleBase/2; | |
8590 | yprof[0] = forwUpHookMainBody->GetY(0) + kForwUpHookHoleY; | |
8591 | xprof[1] = kForwUpHookHoleWide/2; | |
8592 | yprof[1] = yprof[0] + (xprof[1] - xprof[0]); // Go at 45deg | |
8593 | xprof[2] = xprof[1]; | |
8594 | yprof[2] = yprof[0] + kForwUpHookHoleHi - kForwUpHookHoleR5; | |
8595 | xprof[3] = xprof[2] - kForwUpHookHoleR5*(1 - CosD(45)); | |
8596 | yprof[3] = yprof[2] + kForwUpHookHoleR5*SinD(45); | |
8597 | xprof[4] = xprof[2] - kForwUpHookHoleR5; | |
8598 | yprof[4] = yprof[0] + kForwUpHookHoleHi; | |
8599 | ||
8600 | // We did the right side, now reflex on the left side | |
8601 | for (Int_t jp = 0; jp < kNumbOfForwUpHookHolePts; jp++) { | |
8602 | xprof[5+jp] = -xprof[4-jp]; | |
8603 | yprof[5+jp] = yprof[4-jp]; | |
8604 | } | |
8605 | ||
8606 | // Now the actual Xtru | |
8607 | forwUpHookHole->DefinePolygon(2*kNumbOfForwUpHookHolePts, xprof, yprof); | |
8608 | forwUpHookHole->DefineSection(0, -0.1); | |
8609 | forwUpHookHole->DefineSection(1, kForwUpHookThick+0.1); | |
8610 | ||
8611 | // The hollow | |
8612 | TGeoBBox *forwUpHookHollow = new TGeoBBox(2.1 *kForwUpHookHalfBase, | |
8613 | 0.55*kForwUpHookHollowHi, | |
8614 | 0.55*kForwUpHookHollowWide); | |
8615 | forwUpHookHollow->SetName("ITSforwUpHookHollow"); | |
8616 | ||
8617 | TGeoTranslation *forwUpHookHollPos = new TGeoTranslation(0., | |
8618 | forwUpHookMainBody->GetY(0) + 0.5*kForwUpHookHollowHi, | |
8619 | forwUpHookMainBody->GetZ(1) - 0.5*kForwUpHookHollowWide); | |
8620 | forwUpHookHollPos->SetName("ITSforwUpHookHollPos"); | |
8621 | forwUpHookHollPos->RegisterYourself(); | |
8622 | ||
8623 | // Finally the actual shape: a CompositeShape | |
8624 | TGeoCompositeShape *forwUpHookShape = new TGeoCompositeShape("ITSforwUpHookMainBody-ITSforwUpHookHole-ITSforwUpHookHollow:ITSforwUpHookHollPos"); | |
8625 | ||
8626 | // The Forward Lower Hook (0872/C/08): a Composite Shape made of | |
8627 | // a really complex Xtru to approximate the arc with a polyline, | |
8628 | // another Xtru for the hole, and a BBox for the hollow | |
8629 | // The main body | |
8630 | TGeoXtru *forwLwHookMainBody = new TGeoXtru(2); | |
8631 | forwLwHookMainBody->SetName("ITSforwLwHookMainBody"); | |
8632 | ||
8633 | xprof[ 0] = kForwLwHookHalfBase - kForwLwHookBaseCut; | |
8634 | yprof[ 0] = kForwLwHookRext - kForwLwHookHiTot; | |
8635 | xprof[ 1] = kForwLwHookHalfBase; | |
8636 | yprof[ 1] = yprof[0] + kForwLwHookBaseCut; | |
8637 | xprof[ 2] = xprof[1]; | |
8638 | yprof[ 2] = yprof[0] + (kForwLwHookHollowHi - kForwLwHookYToHollow | |
8639 | - kForwLwHookRint); | |
8640 | for (Int_t j=1; j<6; j++) { | |
8641 | xprof[2+j] = xprof[2] + kForwLwHookRint*(1 - CosD(90*j/5)); | |
8642 | yprof[2+j] = yprof[2] + kForwLwHookRint*SinD(90*j/5); | |
8643 | } | |
8644 | xprof[ 8] = kForwLwHookWide/2; | |
8645 | yprof[ 8] = yprof[7]; | |
8646 | xprof[ 9] = xprof[8]; | |
8647 | alpha = TMath::ASin(0.5*kForwLwHookWide/kForwLwHookRext); | |
8648 | yprof[ 9] = kForwLwHookRext*TMath::Cos(alpha); | |
8649 | xprof[10] = kForwLwHookRext*TMath::Sin(alpha/2); | |
8650 | yprof[10] = kForwLwHookRext*TMath::Cos(alpha/2); | |
8651 | xprof[11] = 0; | |
8652 | yprof[11] = kForwLwHookRext; | |
8653 | ||
8654 | // We did the right side, now reflex on the left side | |
8655 | for (Int_t jp = 0; jp < kNumberOfForwLwHookPts; jp++) { | |
8656 | xprof[12+jp] = -xprof[10-jp]; | |
8657 | yprof[12+jp] = yprof[10-jp]; | |
8658 | } | |
8659 | ||
8660 | // Now the actual Xtru | |
8661 | forwLwHookMainBody->DefinePolygon(2*kNumberOfForwLwHookPts+1, xprof, yprof); | |
8662 | forwLwHookMainBody->DefineSection(0, 0); | |
8663 | forwLwHookMainBody->DefineSection(1, kForwLwHookThick); | |
8664 | ||
8665 | // The hole | |
8666 | TGeoXtru *forwLwHookHole = new TGeoXtru(2); | |
8667 | forwLwHookHole->SetName("ITSforwLwHookHole"); | |
8668 | ||
8669 | xprof[0] = 0; | |
8670 | yprof[0] = forwLwHookMainBody->GetY(0) + kForwLwHookHoleYPos | |
8671 | - kForwLwHookHoleR; | |
8672 | for (Int_t j=1; j<3; j++) { | |
8673 | xprof[0+j] = xprof[0] + kForwLwHookHoleR*SinD(90*j/3); | |
8674 | yprof[0+j] = yprof[0] + kForwLwHookHoleR*(1 - CosD(90*j/3)); | |
8675 | } | |
8676 | xprof[3] = xprof[0] + kForwLwHookHoleR; | |
8677 | yprof[3] = yprof[0] + kForwLwHookHoleR; | |
8678 | xprof[4] = xprof[3]; | |
8679 | yprof[4] = yprof[3] + kForwLwHookHoleIntHi; | |
8680 | for (Int_t j=1; j<3; j++) { | |
8681 | xprof[4+j] = xprof[4] - kForwLwHookHoleR*(1 - CosD(90*j/3)); | |
8682 | yprof[4+j] = yprof[4] + kForwLwHookHoleR*SinD(90*j/3); | |
8683 | } | |
8684 | xprof[7] = xprof[0]; | |
8685 | yprof[7] = yprof[4] + kForwLwHookHoleR; | |
8686 | ||
8687 | // We did the right side, now reflex on the left side | |
8688 | for (Int_t jp = 0; jp < kNumbOfForwLwHookHolePts-1; jp++) { | |
8689 | xprof[8+jp] = -xprof[6-jp]; | |
8690 | yprof[8+jp] = yprof[6-jp]; | |
8691 | } | |
8692 | ||
8693 | // Now the actual Xtru | |
8694 | forwLwHookHole->DefinePolygon(2*kNumbOfForwLwHookHolePts, xprof, yprof); | |
8695 | forwLwHookHole->DefineSection(0, -0.1); | |
8696 | forwLwHookHole->DefineSection(1, kForwLwHookThick+0.1); | |
8697 | ||
8698 | // The hollow | |
8699 | TGeoBBox *forwLwHookHollow = new TGeoBBox(2.1 *kForwLwHookHalfBase, | |
8700 | 0.55*kForwLwHookHollowHi, | |
8701 | 0.55*kForwLwHookHollowWide); | |
8702 | forwLwHookHollow->SetName("ITSforwLwHookHollow"); | |
8703 | ||
8704 | TGeoTranslation *forwLwHookHollPos = new TGeoTranslation(0., | |
8705 | forwLwHookMainBody->GetY(0) + 0.5*kForwLwHookHollowHi, | |
8706 | forwLwHookMainBody->GetZ(1) - 0.5*kForwLwHookHollowWide); | |
8707 | forwLwHookHollPos->SetName("ITSforwLwHookHollPos"); | |
8708 | forwLwHookHollPos->RegisterYourself(); | |
8709 | ||
8710 | // Finally the actual shape: a CompositeShape | |
8711 | TGeoCompositeShape *forwLwHookShape = new TGeoCompositeShape("ITSforwLwHookMainBody-ITSforwLwHookHole-ITSforwLwHookHollow:ITSforwLwHookHollPos"); | |
8712 | ||
8713 | // The Rear Upper Hook (0872/C/10): a Composite Shape made of | |
8714 | // a really complex Xtru to approximate the arc with a polyline, | |
8715 | // and another Xtru for the hole | |
8716 | // The main body | |
8717 | TGeoXtru *rearUpHookMainBody = new TGeoXtru(2); | |
8718 | rearUpHookMainBody->SetName("ITSrearUpHookMainBody"); | |
8719 | ||
8720 | xprof[0] = kRearUpHookHalfBase; | |
8721 | yprof[0] = kRearUpHookRext - kRearUpHookHiTot; | |
8722 | xprof[1] = xprof[0]; | |
8723 | yprof[1] = yprof[0] + (kRearUpHookHiInt - kRearUpHookRint); | |
8724 | for (Int_t j=1; j<6; j++) { | |
8725 | xprof[1+j] = xprof[1] + kRearUpHookRint*(1 - CosD(90*j/5)); | |
8726 | yprof[1+j] = yprof[1] + kRearUpHookRint*SinD(90*j/5); | |
8727 | } | |
8728 | xprof[ 7] = kRearUpHookWide/2; | |
8729 | yprof[ 7] = yprof[5]; | |
8730 | xprof[ 8] = xprof[7]; | |
8731 | alpha = TMath::ASin(0.5*kRearUpHookWide/kRearUpHookRext); | |
8732 | yprof[ 8] = kRearUpHookRext*TMath::Cos(alpha); | |
8733 | xprof[ 9] = kRearUpHookRext*TMath::Sin(alpha/2); | |
8734 | yprof[ 9] = kRearUpHookRext*TMath::Cos(alpha/2); | |
8735 | xprof[10] = 0; | |
8736 | yprof[10] = kRearUpHookRext; | |
8737 | ||
8738 | // We did the right side, now reflex on the left side | |
8739 | for (Int_t jp = 0; jp < kNumberOfRearUpHookPts; jp++) { | |
8740 | xprof[11+jp] = -xprof[9-jp]; | |
8741 | yprof[11+jp] = yprof[9-jp]; | |
8742 | } | |
8743 | ||
8744 | // Now the actual Xtru | |
8745 | rearUpHookMainBody->DefinePolygon(2*kNumberOfRearUpHookPts+1, xprof, yprof); | |
8746 | rearUpHookMainBody->DefineSection(0, 0); | |
8747 | rearUpHookMainBody->DefineSection(1, kRearUpHookThick); | |
8748 | ||
8749 | // The hole | |
8750 | TGeoXtru *rearUpHookHole = new TGeoXtru(2); | |
8751 | rearUpHookHole->SetName("ITSrearUpHookHole"); | |
8752 | ||
8753 | xprof[0] = kRearUpHookHoleBase/2; | |
8754 | yprof[0] = rearUpHookMainBody->GetY(0) + kRearUpHookHoleY; | |
8755 | xprof[1] = kRearUpHookHoleWide/2; | |
8756 | yprof[1] = yprof[0] + (xprof[1] - xprof[0]); // Go at 45deg | |
8757 | xprof[2] = xprof[1]; | |
8758 | yprof[2] = yprof[0] + kRearUpHookHoleHi - kRearUpHookHoleR5; | |
8759 | xprof[3] = xprof[2] - kRearUpHookHoleR5*(1 - CosD(45)); | |
8760 | yprof[3] = yprof[2] + kRearUpHookHoleR5*SinD(45); | |
8761 | xprof[4] = xprof[2] - kRearUpHookHoleR5; | |
8762 | yprof[4] = yprof[0] + kRearUpHookHoleHi; | |
8763 | ||
8764 | // We did the right side, now reflex on the left side | |
8765 | for (Int_t jp = 0; jp < kNumbOfRearUpHookHolePts; jp++) { | |
8766 | xprof[5+jp] = -xprof[4-jp]; | |
8767 | yprof[5+jp] = yprof[4-jp]; | |
8768 | } | |
8769 | ||
8770 | // Now the actual Xtru | |
8771 | rearUpHookHole->DefinePolygon(2*kNumbOfRearUpHookHolePts, xprof, yprof); | |
8772 | rearUpHookHole->DefineSection(0, -0.1); | |
8773 | rearUpHookHole->DefineSection(1, kRearUpHookThick+0.1); | |
8774 | ||
8775 | // Finally the actual shape: a CompositeShape | |
8776 | TGeoCompositeShape *rearUpHookShape = new TGeoCompositeShape("ITSrearUpHookMainBody-ITSrearUpHookHole"); | |
8777 | ||
8778 | // The Rear Lower Hook (0872/C/11): a Xtru | |
8779 | TGeoXtru *rearLwHookShape = new TGeoXtru(2); | |
8780 | rearLwHookShape->SetName("ITSrearLwHookShape"); | |
8781 | ||
8782 | xprof[0] = kRearLwHookWide/2; | |
8783 | yprof[0] = kRearLwHookRext - kRearLwHookHiTot; | |
8784 | xprof[1] = xprof[0]; | |
8785 | alpha = TMath::ASin(0.5*kRearLwHookWide/kRearLwHookRext); | |
8786 | yprof[1] = kRearLwHookRext*TMath::Cos(alpha); | |
8787 | xprof[2] = kRearLwHookRext*TMath::Sin(alpha/2); | |
8788 | yprof[2] = kRearLwHookRext*TMath::Cos(alpha/2); | |
8789 | xprof[3] = 0; | |
8790 | yprof[3] = kRearLwHookRext; | |
8791 | ||
8792 | // We did the right side, now reflex on the left side | |
8793 | for (Int_t jp = 0; jp < kNumberOfRearLwHookPts; jp++) { | |
8794 | xprof[4+jp] = -xprof[2-jp]; | |
8795 | yprof[4+jp] = yprof[2-jp]; | |
8796 | } | |
8797 | ||
8798 | // Now the actual Xtru | |
8799 | rearLwHookShape->DefinePolygon(2*kNumberOfRearLwHookPts+1, xprof, yprof); | |
8800 | rearLwHookShape->DefineSection(0, 0); | |
8801 | rearLwHookShape->DefineSection(1, kRearLwHookThick); | |
8802 | ||
8803 | // The Rear Lower Bracket (0872/C/16): a Xtru | |
8804 | TGeoXtru *rearLwBrackShape = new TGeoXtru(2); | |
8805 | rearLwBrackShape->SetName("ITSrearLwBrackShape"); | |
8806 | ||
8807 | xprof[0] = 0; | |
8808 | yprof[0] = 0; | |
8809 | xprof[1] = xprof[0] + kRearLwBracketWide1 - kRearLwBracketWide2; | |
8810 | yprof[1] = yprof[0]; | |
8811 | xprof[2] = xprof[1]; | |
8812 | yprof[2] = yprof[0] + kRearLwBracketHi2; | |
8813 | xprof[3] = xprof[2] - kRearLwBracketWide1; | |
8814 | yprof[3] = yprof[2]; | |
8815 | xprof[4] = xprof[3]; | |
8816 | yprof[4] = yprof[3] - kRearLwBracketHi1; | |
8817 | xprof[5] = xprof[0]; | |
8818 | yprof[5] = yprof[4]; | |
8819 | ||
8820 | rearLwBrackShape->DefinePolygon(6, xprof, yprof); | |
8821 | rearLwBrackShape->DefineSection(0,-kRearLwBracketThick/2); | |
8822 | rearLwBrackShape->DefineSection(1, kRearLwBracketThick/2); | |
8823 | ||
8824 | // The Forward S-shaped Stirrup for the webcam (0872/C/V/01): a Xtru | |
8825 | TGeoXtru *forwWebSStirrSh = new TGeoXtru(2); | |
8826 | ||
8827 | xprof[0] = 0; | |
8828 | yprof[0] = 0; | |
8829 | xprof[1] = xprof[0] + kForwWebSStirrLen1; | |
8830 | yprof[1] = yprof[0]; | |
8831 | xprof[2] = xprof[1]; | |
8832 | yprof[2] = yprof[1] + kForwWebSStirrWide1; | |
8833 | xprof[3] = xprof[0] - kForwWebSStirrLen2 + kForwWebSStirrLen3; | |
8834 | yprof[3] = yprof[2]; | |
8835 | xprof[4] = xprof[3]; | |
8836 | yprof[4] = yprof[3] + kForwWebSStirrWide3; | |
8837 | xprof[5] = xprof[4] - kForwWebSStirrLen3; | |
8838 | yprof[5] = yprof[4]; | |
8839 | xprof[6] = xprof[5]; | |
8840 | yprof[6] = yprof[0] + kForwWebSStirrWide2; | |
8841 | xprof[7] = xprof[0]; | |
8842 | yprof[7] = yprof[6]; | |
8843 | ||
8844 | forwWebSStirrSh->DefinePolygon(8, xprof, yprof); | |
8845 | forwWebSStirrSh->DefineSection(0,-kForwWebSStirrDep/2); | |
8846 | forwWebSStirrSh->DefineSection(1, kForwWebSStirrDep/2); | |
8847 | ||
8848 | // The Forward T-shaped Stirrups for the webcam (0872/C/V/03-04): two Xtru | |
8849 | TGeoXtru *forwWebTStirr3Sh = new TGeoXtru(2); | |
8850 | ||
8851 | xprof[0] = -kForwWebTStirrWide2/2; | |
8852 | yprof[0] = 0; | |
8853 | xprof[1] = -kForwWebTStirrWide1/2; | |
8854 | yprof[1] = yprof[0]; | |
8855 | xprof[2] = xprof[1]; | |
8856 | yprof[2] = yprof[1] - kForwWebTStirrLen1; | |
8857 | xprof[3] =-xprof[2]; | |
8858 | yprof[3] = yprof[2]; | |
8859 | xprof[4] = xprof[3]; | |
8860 | yprof[4] = yprof[1]; | |
8861 | xprof[5] =-xprof[0]; | |
8862 | yprof[5] = yprof[4]; | |
8863 | xprof[6] = xprof[5]; | |
8864 | yprof[6] = kForwWebTStirrTotLen3 - kForwWebTStirrLen1; | |
8865 | xprof[7] = xprof[0]; | |
8866 | yprof[7] = yprof[6]; | |
8867 | ||
8868 | forwWebTStirr3Sh->DefinePolygon(8, xprof, yprof); | |
8869 | forwWebTStirr3Sh->DefineSection(0, 0); | |
8870 | forwWebTStirr3Sh->DefineSection(1, kForwWebTStirrThick); | |
8871 | ||
8872 | TGeoXtru *forwWebTStirr4Sh = new TGeoXtru(2); | |
8873 | ||
8874 | yprof[6] = kForwWebTStirrTotLen4 - kForwWebTStirrLen1; | |
8875 | yprof[7] = yprof[6]; | |
8876 | ||
8877 | forwWebTStirr4Sh->DefinePolygon(8, xprof, yprof); | |
8878 | forwWebTStirr4Sh->DefineSection(0, 0); | |
8879 | forwWebTStirr4Sh->DefineSection(1, kForwWebTStirrThick); | |
8880 | ||
8881 | // The Forward and Rear clamp for the webcam (0872/C/V/02): a Xtru | |
8882 | TGeoXtru *frWebClampSh = new TGeoXtru(2); | |
8883 | ||
8884 | xprof[0] = kFRWebClampIntWide/2; | |
8885 | yprof[0] = kFRWebClampIntHi; | |
8886 | xprof[1] = xprof[0]; | |
8887 | yprof[1] = 0; | |
8888 | xprof[2] = kFRWebClampExtWide/2; | |
8889 | yprof[2] = yprof[1]; | |
8890 | xprof[3] = xprof[2]; | |
8891 | yprof[3] = kFRWebClampExtHi; | |
8892 | for (Int_t jp = 0; jp < 4; jp++) { | |
8893 | xprof[4+jp] = -xprof[3-jp]; | |
8894 | yprof[4+jp] = yprof[3-jp]; | |
8895 | } | |
8896 | ||
8897 | frWebClampSh->DefinePolygon(8, xprof, yprof); | |
8898 | frWebClampSh->DefineSection(0,-kFRWebClampThick/2); | |
8899 | frWebClampSh->DefineSection(1, kFRWebClampThick/2); | |
8900 | ||
8901 | // The Rear Upper Stirrup for the webcam (0872/C/V/05): a Xtru | |
8902 | TGeoXtru *upWebStirrSh = new TGeoXtru(2); | |
8903 | ||
8904 | xprof[0] = 0; | |
8905 | yprof[0] = 0; | |
8906 | xprof[1] = xprof[0] - (kRearUpWebStirrWide - 2*kRearUpWebStirrThick); | |
8907 | yprof[1] = yprof[0]; | |
8908 | xprof[2] = xprof[1]; | |
8909 | yprof[2] = yprof[1] + (kRearUpWebStirrH1 - kRearUpWebStirrThick); | |
8910 | xprof[3] = xprof[2] - kRearUpWebStirrThick; | |
8911 | yprof[3] = yprof[2]; | |
8912 | xprof[4] = xprof[3]; | |
8913 | yprof[4] = yprof[3] - kRearUpWebStirrH1; | |
8914 | xprof[5] = xprof[4] + kRearUpWebStirrWide; | |
8915 | yprof[5] = yprof[4]; | |
8916 | xprof[6] = xprof[5]; | |
8917 | yprof[6] = yprof[5] + kRearUpWebStirrH2; | |
8918 | xprof[7] = xprof[0]; | |
8919 | yprof[7] = yprof[6]; | |
8920 | ||
8921 | upWebStirrSh->DefinePolygon(8, xprof, yprof); | |
8922 | upWebStirrSh->DefineSection(0,-kRearUpWebStirrDep/2); | |
8923 | upWebStirrSh->DefineSection(1, kRearUpWebStirrDep/2); | |
8924 | ||
8925 | // The Rear Upper Bar for the webcam (0872/C/V/06): a BBox | |
8926 | TGeoBBox *upRearWebBarSh = new TGeoBBox(kRearUpWebBarLen/2, | |
8927 | kRearUpWebBarHi/2, | |
8928 | kRearUpWebBarThick/2); | |
8929 | ||
8930 | // The Webcam: a BBox | |
8931 | TGeoBBox *webcamShape = new TGeoBBox(kFRWebClampIntWide/2, | |
8932 | kWebcamLength/2, | |
8933 | kFRWebClampIntHi/2); | |
8934 | ||
8935 | // The Upper Wheel Slide (0872/C/Z/00-01-02) | |
8936 | // A mother volume of air (to avoid assembly) contains the Alluminum block | |
8937 | // (a Composite Shape: a Xtru and a Pcon for the hole) and the Steel pin | |
8938 | // (a Pcon) (The wheels are approximated as part of the block itself) | |
8939 | // The Air mother volume | |
8940 | TGeoXtru *upSlideAirSh = new TGeoXtru(2); | |
8941 | upSlideAirSh->SetName("ITSupperSlideAirShape"); | |
8942 | ||
8943 | xprof[0] = 0; | |
8944 | yprof[0] = 0; | |
8945 | xprof[1] = xprof[0]; | |
8946 | yprof[1] = kUpperSlideBlockHi + kUpperSlideStubHi - kUpperSlideWheelHi; | |
8947 | xprof[2] = xprof[1] - kUpperSlideIntDepth; | |
8948 | yprof[2] = yprof[1]; | |
8949 | xprof[3] = xprof[2]; | |
8950 | yprof[3] = yprof[2] - kUpperSlideTotHeight; | |
8951 | xprof[4] = xprof[3] + kUpperSlideTotDepth; | |
8952 | yprof[4] = yprof[3]; | |
8953 | xprof[5] = xprof[4]; | |
8954 | yprof[5] = yprof[0]; | |
8955 | ||
8956 | upSlideAirSh->DefinePolygon(6, xprof, yprof); | |
8957 | upSlideAirSh->DefineSection(0,-kUpperSlideWidth/2); | |
8958 | upSlideAirSh->DefineSection(1, kUpperSlideWidth/2); | |
8959 | ||
8960 | // The (filled) Aluminum block: a Xtru | |
8961 | TGeoXtru *upSlideAluSh = new TGeoXtru(2); | |
8962 | upSlideAluSh->SetName("ITSupperSlideAluShape"); | |
8963 | ||
8964 | xprof[0] = upSlideAirSh->GetX(0); | |
8965 | yprof[0] = upSlideAirSh->GetY(0); | |
8966 | xprof[1] = upSlideAirSh->GetX(1); | |
8967 | yprof[1] = upSlideAirSh->GetY(1); | |
8968 | xprof[2] = xprof[1] - kUpperSlideStubDep; | |
8969 | yprof[2] = yprof[1]; | |
8970 | xprof[3] = xprof[2]; | |
8971 | yprof[3] = yprof[2] - kUpperSlideStubHi; | |
8972 | xprof[4] = upSlideAirSh->GetX(2); | |
8973 | yprof[4] = yprof[3]; | |
8974 | xprof[5] = xprof[4]; | |
8975 | yprof[5] = yprof[4] - kUpperSlideBlockHi; | |
8976 | xprof[6] = upSlideAirSh->GetX(5); | |
8977 | yprof[6] = yprof[5]; | |
8978 | xprof[7] = xprof[6]; | |
8979 | yprof[7] = yprof[0]; | |
8980 | ||
8981 | upSlideAluSh->DefinePolygon(8, xprof, yprof); | |
8982 | upSlideAluSh->DefineSection(0, upSlideAirSh->GetZ(0)); | |
8983 | upSlideAluSh->DefineSection(1, upSlideAirSh->GetZ(1)); | |
8984 | ||
8985 | // The cylindrical hole in the block; a Pcon | |
8986 | TGeoPcon *upSlideHoleSh = new TGeoPcon(0, 360, 10); | |
8987 | upSlideHoleSh->SetName("ITSupperSlideHoleShape"); | |
8988 | ||
8989 | zpos = upSlideAluSh->GetY(5); | |
8990 | upSlideHoleSh->DefineSection(0, zpos-0.1, 0, kUpperSlideHoleRout); | |
8991 | zpos += (kUpperSlideBlockHi - kUpperSlideHoleH3 - kUpperSlideHoleH2 | |
8992 | - 2*kUpperSlideHoleH1); | |
8993 | upSlideHoleSh->DefineSection(1, zpos, 0, kUpperSlideHoleRout); | |
8994 | upSlideHoleSh->DefineSection(2, zpos, 0, kUpperSlideHoleRint2); | |
8995 | zpos += kUpperSlideHoleH3; | |
8996 | upSlideHoleSh->DefineSection(3, zpos, 0, kUpperSlideHoleRint2); | |
8997 | upSlideHoleSh->DefineSection(4, zpos, 0, kUpperSlideHoleRout); | |
8998 | zpos += kUpperSlideHoleH1; | |
8999 | upSlideHoleSh->DefineSection(5, zpos, 0, kUpperSlideHoleRout); | |
9000 | upSlideHoleSh->DefineSection(6, zpos, 0, kUpperSlideHoleRint1); | |
9001 | zpos += kUpperSlideHoleH2; | |
9002 | upSlideHoleSh->DefineSection(7, zpos, 0, kUpperSlideHoleRint1); | |
9003 | upSlideHoleSh->DefineSection(8, zpos, 0, kUpperSlideHoleRout); | |
9004 | zpos += kUpperSlideHoleH1; | |
9005 | upSlideHoleSh->DefineSection(9, zpos+0.1, 0, kUpperSlideHoleRout); | |
9006 | ||
9007 | TGeoCombiTrans *upSlideHolePos = new TGeoCombiTrans(-kUpperSlideHoleXPos,0,0, | |
9008 | new TGeoRotation("",0,-90,0) ); | |
9009 | upSlideHolePos->SetName("ITSupperSlideHolePos"); | |
9010 | upSlideHolePos->RegisterYourself(); | |
9011 | ||
9012 | // The actual block: a CompositeShape | |
9013 | TGeoCompositeShape *upSlideBlockSh = new TGeoCompositeShape("ITSupperSlideAluShape-ITSupperSlideHoleShape:ITSupperSlideHolePos"); | |
9014 | ||
9015 | // The Steel pin in the block; a Pcon | |
9016 | TGeoPcon *upSlidePinSh = new TGeoPcon(0, 360, 6); | |
9017 | upSlidePinSh->SetName("ITSupperSlidePinShape"); | |
9018 | ||
9019 | zpos = upSlideAluSh->GetY(5) - (kUpperSlidePinH1 + kUpperSlidePinH2 | |
9020 | + kUpperSlidePinH3 - kUpperSlideBlockHi); | |
9021 | upSlidePinSh->DefineSection(0, zpos, 0, kUpperSlidePinRmin); | |
9022 | zpos += kUpperSlidePinH3; | |
9023 | upSlidePinSh->DefineSection(1, zpos, 0, kUpperSlidePinRmin); | |
9024 | upSlidePinSh->DefineSection(2, zpos, 0, kUpperSlidePinRmax); | |
9025 | zpos += kUpperSlidePinH2; | |
9026 | upSlidePinSh->DefineSection(3, zpos, 0, kUpperSlidePinRmax); | |
9027 | upSlidePinSh->DefineSection(4, zpos, 0, kUpperSlidePinRmin); | |
9028 | zpos += kUpperSlidePinH1; | |
9029 | upSlidePinSh->DefineSection(5, zpos, 0, kUpperSlidePinRmin); | |
9030 | ||
9031 | // The Lower Wheel Slide (0872/C/W/00-01-02-03) | |
9032 | // A mother volume of air (to avoid assembly) contains the Alluminum block | |
9033 | // (a Composite Shape: a Xtru and a Pcon for the hole), the Alluminum nose | |
9034 | // (a Xtru) and the Steel pin (a Pcon) | |
9035 | // (The wheels are approximated as part of the block itself) | |
9036 | // The Air mother volume | |
9037 | TGeoXtru *lwSlideAirSh = new TGeoXtru(2); | |
9038 | lwSlideAirSh->SetName("ITSlowerSlideAirShape"); | |
9039 | ||
9040 | xprof[0] = 0; | |
9041 | yprof[0] = 0; | |
9042 | xprof[1] = xprof[0] + kLowerSlideTotDepth/2 - kLowerSlideNoseBase/2; | |
9043 | yprof[1] = yprof[0]; | |
9044 | xprof[2] = xprof[1]; | |
9045 | yprof[2] = yprof[1] - (kLowerSlideBlockHi + kLowerSlidePinH2); | |
9046 | xprof[3] = xprof[2] - kLowerSlideTotDepth; | |
9047 | yprof[3] = yprof[2]; | |
9048 | xprof[4] = xprof[3]; | |
9049 | yprof[4] = yprof[3] + kLowerSlidePinH2 + kLowerSlideTotHeight; | |
9050 | xprof[5] = xprof[0]; | |
9051 | yprof[5] = yprof[4]; | |
9052 | ||
9053 | lwSlideAirSh->DefinePolygon(6, xprof, yprof); | |
9054 | lwSlideAirSh->DefineSection(0,-kLowerSlideWidth/2); | |
9055 | lwSlideAirSh->DefineSection(1, kLowerSlideWidth/2); | |
9056 | ||
9057 | // The (filled) Aluminum block: a Xtru | |
9058 | TGeoXtru *lwSlideAluSh = new TGeoXtru(2); | |
9059 | lwSlideAluSh->SetName("ITSlowerSlideAluShape"); | |
9060 | ||
9061 | xprof[0] = lwSlideAirSh->GetX(0); | |
9062 | yprof[0] = lwSlideAirSh->GetY(0); | |
9063 | xprof[1] = lwSlideAirSh->GetX(1); | |
9064 | yprof[1] = lwSlideAirSh->GetY(1); | |
9065 | xprof[2] = xprof[1]; | |
9066 | yprof[2] = yprof[1] - kLowerSlideBlockHi; | |
9067 | xprof[3] = lwSlideAirSh->GetX(3); | |
9068 | yprof[3] = yprof[2]; | |
9069 | xprof[4] = xprof[3]; | |
9070 | yprof[4] = yprof[3] + kLowerSlideBlockHi; | |
9071 | xprof[5] = xprof[4] + kLowerSlideTotDepth/2; | |
9072 | yprof[5] = yprof[4]; | |
9073 | xprof[6] = xprof[5]; | |
9074 | yprof[6] = lwSlideAirSh->GetY(4); | |
9075 | xprof[7] = xprof[0]; | |
9076 | yprof[7] = yprof[6]; | |
9077 | ||
9078 | lwSlideAluSh->DefinePolygon(8, xprof, yprof); | |
9079 | lwSlideAluSh->DefineSection(0, lwSlideAirSh->GetZ(0)); | |
9080 | lwSlideAluSh->DefineSection(1, lwSlideAirSh->GetZ(1)); | |
9081 | ||
9082 | // The cylindrical hole in the block; a Pcon | |
9083 | TGeoPcon *lwSlideHoleSh = new TGeoPcon(0, 360, 4); | |
9084 | lwSlideHoleSh->SetName("ITSlowerSlideHoleShape"); | |
9085 | ||
9086 | zpos = lwSlideAluSh->GetY(2); | |
9087 | lwSlideHoleSh->DefineSection(0, zpos-0.1, 0, kLowerSlideHoleRout); | |
9088 | zpos += kLowerSlideHoleH1; | |
9089 | lwSlideHoleSh->DefineSection(1, zpos, 0, kLowerSlideHoleRout); | |
9090 | lwSlideHoleSh->DefineSection(2, zpos, 0, kLowerSlideHoleRint); | |
9091 | zpos = lwSlideAluSh->GetY(4); | |
9092 | lwSlideHoleSh->DefineSection(3, zpos, 0, kLowerSlideHoleRint); | |
9093 | ||
9094 | TGeoCombiTrans *lwSlideHolePos = new TGeoCombiTrans(lwSlideAluSh->GetX(5), | |
9095 | 0, 0, | |
9096 | new TGeoRotation("",0,-90,0) ); | |
9097 | lwSlideHolePos->SetName("ITSlowerSlideHolePos"); | |
9098 | lwSlideHolePos->RegisterYourself(); | |
9099 | ||
9100 | // The actual block: a CompositeShape | |
9101 | TGeoCompositeShape *lwSlideBlockSh = new TGeoCompositeShape("ITSlowerSlideAluShape-ITSlowerSlideHoleShape:ITSlowerSlideHolePos"); | |
9102 | ||
9103 | // The Aluminum nose: a Xtru | |
9104 | TGeoXtru *lwSlideNoseSh = new TGeoXtru(2); | |
9105 | lwSlideNoseSh->SetName("ITSlowerSlideNoseShape"); | |
9106 | ||
9107 | xprof[0] = lwSlideAluSh->GetX(5); | |
9108 | yprof[0] = lwSlideAluSh->GetY(5); | |
9109 | xprof[1] = xprof[0] - kLowerSlideNoseBase/2; | |
9110 | yprof[1] = yprof[0]; | |
9111 | xprof[2] = xprof[1]; | |
9112 | yprof[2] = yprof[1] + kLowerSlideNoseBasHi; | |
9113 | xprof[3] = lwSlideAluSh->GetX(0) - kLowerSlideNoseUpWid; | |
9114 | yprof[3] = lwSlideAluSh->GetY(6); | |
9115 | xprof[4] = xprof[0]; | |
9116 | yprof[4] = yprof[3]; | |
9117 | ||
9118 | lwSlideNoseSh->DefinePolygon(5, xprof, yprof); | |
9119 | lwSlideNoseSh->DefineSection(0,-kLowerSlideNoseDepth/2); | |
9120 | lwSlideNoseSh->DefineSection(1, kLowerSlideNoseDepth/2); | |
9121 | ||
9122 | // The Steel pin in the block; a Pcon | |
9123 | TGeoPcon *lwSlidePinSh = new TGeoPcon(0, 360, 4); | |
9124 | lwSlidePinSh->SetName("ITSlowerSlidePinShape"); | |
9125 | ||
9126 | zpos = lwSlideAirSh->GetY(2); | |
9127 | lwSlidePinSh->DefineSection(0, zpos, 0, kLowerSlidePinRmax); | |
9128 | zpos += kLowerSlidePinH2; | |
9129 | lwSlidePinSh->DefineSection(1, zpos, 0, kLowerSlidePinRmax); | |
9130 | lwSlidePinSh->DefineSection(2, zpos, 0, kLowerSlidePinRmin); | |
9131 | zpos += kLowerSlidePinH1; | |
9132 | lwSlidePinSh->DefineSection(3, zpos, 0, kLowerSlidePinRmin); | |
9133 | ||
9134 | ||
9135 | // We have all shapes: now create the real volumes | |
9136 | TGeoMedium *medAlcoa = mgr->GetMedium("ITS_ALUMINUM$"); // To code!!!!!! | |
9137 | TGeoMedium *medHokotol = mgr->GetMedium("ITS_HOKOTOL$"); | |
9138 | TGeoMedium *medAnticor = mgr->GetMedium("ITS_ANTICORODAL$"); | |
9139 | TGeoMedium *medAisi = mgr->GetMedium("ITS_AISI304L$"); | |
9140 | TGeoMedium *medAir = mgr->GetMedium("ITS_AIR$"); | |
9141 | TGeoMedium *medPlexy = mgr->GetMedium("ITS_PLEXYGLAS$"); | |
9142 | TGeoMedium *medPVC = mgr->GetMedium("ITS_PVC$"); | |
9143 | ||
9144 | TGeoVolume *suppRingC2C3 = new TGeoVolume("ITSTPCsupportRingC2C3", | |
9145 | ringC2C3, medAlcoa); | |
9146 | ||
9147 | suppRingC2C3->SetVisibility(kTRUE); | |
9148 | suppRingC2C3->SetLineColor(6); // Purple | |
9149 | suppRingC2C3->SetLineWidth(1); | |
9150 | suppRingC2C3->SetFillColor(suppRingC2C3->GetLineColor()); | |
9151 | suppRingC2C3->SetFillStyle(4000); // 0% transparent | |
9152 | ||
9153 | TGeoVolume *forwUpHook = new TGeoVolume("ITSTPCsupportForwUpHook", | |
9154 | forwUpHookShape, medHokotol); | |
9155 | ||
9156 | forwUpHook->SetVisibility(kTRUE); | |
9157 | forwUpHook->SetLineColor(6); // Purple | |
9158 | forwUpHook->SetLineWidth(1); | |
9159 | forwUpHook->SetFillColor(forwUpHook->GetLineColor()); | |
9160 | forwUpHook->SetFillStyle(4000); // 0% transparent | |
9161 | ||
9162 | TGeoVolume *forwLwHook = new TGeoVolume("ITSTPCsupportForwLwHook", | |
9163 | forwLwHookShape, medHokotol); | |
9164 | ||
9165 | forwLwHook->SetVisibility(kTRUE); | |
9166 | forwLwHook->SetLineColor(6); // Purple | |
9167 | forwLwHook->SetLineWidth(1); | |
9168 | forwLwHook->SetFillColor(forwLwHook->GetLineColor()); | |
9169 | forwLwHook->SetFillStyle(4000); // 0% transparent | |
9170 | ||
9171 | TGeoVolume *rearUpHook = new TGeoVolume("ITSTPCsupportRearUpHook", | |
9172 | rearUpHookShape, medHokotol); | |
9173 | ||
9174 | rearUpHook->SetVisibility(kTRUE); | |
9175 | rearUpHook->SetLineColor(6); // Purple | |
9176 | rearUpHook->SetLineWidth(1); | |
9177 | rearUpHook->SetFillColor(rearUpHook->GetLineColor()); | |
9178 | rearUpHook->SetFillStyle(4000); // 0% transparent | |
9179 | ||
9180 | TGeoVolume *rearLwHook = new TGeoVolume("ITSTPCsupportRearLwHook", | |
9181 | rearLwHookShape, medAnticor); | |
9182 | ||
9183 | rearLwHook->SetVisibility(kTRUE); | |
9184 | rearLwHook->SetLineColor(6); // Purple | |
9185 | rearLwHook->SetLineWidth(1); | |
9186 | rearLwHook->SetFillColor(rearLwHook->GetLineColor()); | |
9187 | rearLwHook->SetFillStyle(4000); // 0% transparent | |
9188 | ||
9189 | TGeoVolume *rearLwBrack = new TGeoVolume("ITSTPCsupportRearLwBracket", | |
9190 | rearLwBrackShape, medAnticor); | |
9191 | ||
9192 | rearLwBrack->SetVisibility(kTRUE); | |
9193 | rearLwBrack->SetLineColor(6); // Purple | |
9194 | rearLwBrack->SetLineWidth(1); | |
9195 | rearLwBrack->SetFillColor(rearLwBrack->GetLineColor()); | |
9196 | rearLwBrack->SetFillStyle(4000); // 0% transparent | |
9197 | ||
9198 | TGeoVolume *forwWebSStirrup = new TGeoVolume("ITSTPCsupportForwWebSStirrup", | |
9199 | forwWebSStirrSh, medAnticor); | |
9200 | ||
9201 | forwWebSStirrup->SetVisibility(kTRUE); | |
9202 | forwWebSStirrup->SetLineColor(6); // Purple | |
9203 | forwWebSStirrup->SetLineWidth(1); | |
9204 | forwWebSStirrup->SetFillColor(forwWebSStirrup->GetLineColor()); | |
9205 | forwWebSStirrup->SetFillStyle(4000); // 0% transparent | |
9206 | ||
9207 | TGeoVolume *forwWebTStirr3 = new TGeoVolume("ITSTPCsupportForwWebTStirrup3", | |
9208 | forwWebTStirr3Sh, medAnticor); | |
9209 | ||
9210 | forwWebTStirr3->SetVisibility(kTRUE); | |
9211 | forwWebTStirr3->SetLineColor(6); // Purple | |
9212 | forwWebTStirr3->SetLineWidth(1); | |
9213 | forwWebTStirr3->SetFillColor(forwWebTStirr3->GetLineColor()); | |
9214 | forwWebTStirr3->SetFillStyle(4000); // 0% transparent | |
9215 | ||
9216 | TGeoVolume *forwWebTStirr4 = new TGeoVolume("ITSTPCsupportForwWebTStirrup4", | |
9217 | forwWebTStirr4Sh, medAnticor); | |
9218 | ||
9219 | forwWebTStirr4->SetVisibility(kTRUE); | |
9220 | forwWebTStirr4->SetLineColor(6); // Purple | |
9221 | forwWebTStirr4->SetLineWidth(1); | |
9222 | forwWebTStirr4->SetFillColor(forwWebTStirr4->GetLineColor()); | |
9223 | forwWebTStirr4->SetFillStyle(4000); // 0% transparent | |
9224 | ||
9225 | TGeoVolume *frWebClamp = new TGeoVolume("ITSTPCsupportForwRearWebClamp", | |
9226 | frWebClampSh, medPlexy); | |
9227 | ||
9228 | frWebClamp->SetVisibility(kTRUE); | |
9229 | frWebClamp->SetLineColor(kAzure); | |
9230 | frWebClamp->SetLineWidth(1); | |
9231 | frWebClamp->SetFillColor(frWebClamp->GetLineColor()); | |
9232 | frWebClamp->SetFillStyle(4000); // 0% transparent | |
9233 | ||
9234 | TGeoVolume *upWebStirrup = new TGeoVolume("ITSTPCsupportUpperWebStirrup", | |
9235 | upWebStirrSh, medAnticor); | |
9236 | ||
9237 | upWebStirrup->SetVisibility(kTRUE); | |
9238 | upWebStirrup->SetLineColor(6); // Purple | |
9239 | upWebStirrup->SetLineWidth(1); | |
9240 | upWebStirrup->SetFillColor(upWebStirrup->GetLineColor()); | |
9241 | upWebStirrup->SetFillStyle(4000); // 0% transparent | |
9242 | ||
9243 | TGeoVolume *upRearWebBar = new TGeoVolume("ITSTPCsupportUpperRearWebBar", | |
9244 | upRearWebBarSh, medPlexy); | |
9245 | ||
9246 | upRearWebBar->SetVisibility(kTRUE); | |
9247 | upRearWebBar->SetLineColor(kAzure); | |
9248 | upRearWebBar->SetLineWidth(1); | |
9249 | upRearWebBar->SetFillColor(upRearWebBar->GetLineColor()); | |
9250 | upRearWebBar->SetFillStyle(4000); // 0% transparent | |
9251 | ||
9252 | TGeoVolume *webCam = new TGeoVolume("ITSTPCsupportWebcam", | |
9253 | webcamShape, medPVC); | |
9254 | ||
9255 | webCam->SetVisibility(kTRUE); | |
9256 | webCam->SetLineColor(kBlack); | |
9257 | webCam->SetLineWidth(1); | |
9258 | webCam->SetFillColor(webCam->GetLineColor()); | |
9259 | webCam->SetFillStyle(4000); // 0% transparent | |
9260 | ||
9261 | TGeoVolume *upSlideVol = new TGeoVolume("ITSTPCsupportUpperSlide", | |
9262 | upSlideAirSh, medAir); | |
9263 | ||
9264 | upSlideVol->SetVisibility(kFALSE); | |
9265 | ||
9266 | TGeoVolume *upSlideBlock = new TGeoVolume("ITSTPCsupportUpperSlideBlock", | |
9267 | upSlideBlockSh, medAnticor); | |
9268 | ||
9269 | upSlideBlock->SetVisibility(kTRUE); | |
9270 | upSlideBlock->SetLineColor(6); // Purple | |
9271 | upSlideBlock->SetLineWidth(1); | |
9272 | upSlideBlock->SetFillColor(upSlideBlock->GetLineColor()); | |
9273 | upSlideBlock->SetFillStyle(4000); // 0% transparent | |
9274 | ||
9275 | TGeoVolume *upSlidePin = new TGeoVolume("ITSTPCsupportUpperSlidePin", | |
9276 | upSlidePinSh, medAisi); | |
9277 | ||
9278 | upSlidePin->SetVisibility(kTRUE); | |
9279 | upSlidePin->SetLineColor(kGray); | |
9280 | upSlidePin->SetLineWidth(1); | |
9281 | upSlidePin->SetFillColor(upSlidePin->GetLineColor()); | |
9282 | upSlidePin->SetFillStyle(4000); // 0% transparent | |
9283 | ||
9284 | TGeoVolume *lwSlideVol = new TGeoVolume("ITSTPCsupportLowerSlide", | |
9285 | lwSlideAirSh, medAir); | |
9286 | ||
9287 | lwSlideVol->SetVisibility(kFALSE); | |
9288 | ||
9289 | TGeoVolume *lwSlideBlock = new TGeoVolume("ITSTPCsupportLowerSlideBlock", | |
9290 | lwSlideBlockSh, medAnticor); | |
9291 | ||
9292 | lwSlideBlock->SetVisibility(kTRUE); | |
9293 | lwSlideBlock->SetLineColor(6); // Purple | |
9294 | lwSlideBlock->SetLineWidth(1); | |
9295 | lwSlideBlock->SetFillColor(lwSlideBlock->GetLineColor()); | |
9296 | lwSlideBlock->SetFillStyle(4000); // 0% transparent | |
9297 | ||
9298 | TGeoVolume *lwSlideNose = new TGeoVolume("ITSTPCsupportLowerSlideNose", | |
9299 | lwSlideNoseSh, medAnticor); | |
9300 | ||
9301 | lwSlideNose->SetVisibility(kTRUE); | |
9302 | lwSlideNose->SetLineColor(6); // Purple | |
9303 | lwSlideNose->SetLineWidth(1); | |
9304 | lwSlideNose->SetFillColor(lwSlideNose->GetLineColor()); | |
9305 | lwSlideNose->SetFillStyle(4000); // 0% transparent | |
9306 | ||
9307 | TGeoVolume *lwSlidePin = new TGeoVolume("ITSTPCsupportLowerSlidePin", | |
9308 | lwSlidePinSh, medAisi); | |
9309 | ||
9310 | lwSlidePin->SetVisibility(kTRUE); | |
9311 | lwSlidePin->SetLineColor(kGray); | |
9312 | lwSlidePin->SetLineWidth(1); | |
9313 | lwSlidePin->SetFillColor(lwSlidePin->GetLineColor()); | |
9314 | lwSlidePin->SetFillStyle(4000); // 0% transparent | |
9315 | ||
9316 | ||
9317 | // Build up the wheel slides | |
9318 | upSlideVol->AddNode(upSlideBlock,1,0); | |
9319 | upSlideVol->AddNode(upSlidePin, 1, | |
9320 | new TGeoCombiTrans(-kUpperSlideHoleXPos, 0, 0, | |
9321 | new TGeoRotation("",0,-90,0) ) ); | |
9322 | ||
9323 | lwSlideVol->AddNode(lwSlideBlock,1,0); | |
9324 | lwSlideVol->AddNode(lwSlideNose ,1,0); | |
9325 | lwSlideVol->AddNode(lwSlidePin, 1, | |
9326 | new TGeoCombiTrans(lwSlideAluSh->GetX(5), 0, 0, | |
9327 | new TGeoRotation("",0,-90,0) ) ); | |
9328 | ||
9329 | ||
9330 | // Finally put everything in the mother volume | |
9331 | moth->AddNode(suppRingC2C3,1, | |
9332 | new TGeoTranslation(0, 0, kRingCZPos) ); | |
9333 | moth->AddNode(suppRingC2C3,2, | |
9334 | new TGeoCombiTrans( 0, 0,-kRingCZPos, | |
9335 | new TGeoRotation("",0.,180.,0.) ) ); | |
9336 | moth->AddNode(suppRingC2C3,3, | |
9337 | new TGeoCombiTrans( 0, 0, kRingCZPos, | |
9338 | new TGeoRotation("",0.,0.,180.) ) ); | |
9339 | moth->AddNode(suppRingC2C3,4, | |
9340 | new TGeoCombiTrans( 0, 0,-kRingCZPos, | |
9341 | new TGeoRotation("",0.,180.,180.) ) ); | |
9342 | ||
9343 | zpos = kRingCZPos + kRingCThick; | |
9344 | moth->AddNode(forwUpHook,1, | |
9345 | new TGeoTranslation( 0, 0, zpos) ); | |
9346 | ||
9347 | zpos = kRingCZPos + kRingCThick; | |
9348 | moth->AddNode(forwLwHook,1, | |
9349 | new TGeoCombiTrans( 0, 0, zpos, | |
9350 | new TGeoRotation("",0.,0.,180.) ) ); | |
9351 | ||
9352 | zpos = kRingCZPos + kRingCThick + kRearUpHookThick; | |
9353 | moth->AddNode(rearUpHook,1, | |
9354 | new TGeoTranslation( 0, 0,-zpos) ); | |
9355 | ||
9356 | zpos = kRingCZPos + kRingCThick + kRearLwHookThick; | |
9357 | moth->AddNode(rearLwHook,1, | |
9358 | new TGeoCombiTrans( 0, 0,-zpos, | |
9359 | new TGeoRotation("",0.,0.,180.) ) ); | |
9360 | ||
9361 | xpos = kRearLwHookWide/2 + kRearLwBracketThick/2; | |
9362 | ypos = -kRingCHeight; | |
9363 | moth->AddNode(rearLwBrack,1, | |
9364 | new TGeoCombiTrans( xpos, ypos,-zpos, | |
9365 | new TGeoRotation("", 90.,-90.,-90.) ) ); | |
9366 | moth->AddNode(rearLwBrack,2, | |
9367 | new TGeoCombiTrans(-xpos, ypos,-zpos, | |
9368 | new TGeoRotation("", 90.,-90.,-90.) ) ); | |
9369 | ||
9370 | xpos = kForwUpHookWide/2; | |
9371 | ypos = (forwUpHookMainBody->GetY(8) + forwUpHookMainBody->GetY(9))/2; | |
9372 | zpos = kRingCZPos + kRingCThick; | |
9373 | moth->AddNode(forwWebSStirrup,1, | |
9374 | new TGeoCombiTrans( xpos, ypos, zpos, | |
9375 | new TGeoRotation("", 0., 90., 0.) ) ); | |
9376 | xpos = kForwLwHookWide/2; | |
9377 | ypos = (forwLwHookMainBody->GetY(8) + forwLwHookMainBody->GetY(9))/2; | |
9378 | moth->AddNode(forwWebSStirrup,2, | |
9379 | new TGeoCombiTrans( xpos,-ypos, zpos, | |
9380 | new TGeoRotation("", 0., 90., 0.) ) ); | |
9381 | ||
9382 | xpos = kForwUpHookWide/2 | |
9383 | + (forwWebSStirrSh->GetX(4) + forwWebSStirrSh->GetX(5))/2; | |
9384 | ypos = (forwUpHookMainBody->GetY(8) + forwUpHookMainBody->GetY(9))/2 | |
9385 | + forwWebSStirrSh->GetZ(1) - forwWebTStirr3Sh->GetY(7); | |
9386 | zpos += (forwWebSStirrSh->GetY(4) - forwWebSStirrSh->GetY(0)); | |
9387 | moth->AddNode(forwWebTStirr3,1, | |
9388 | new TGeoTranslation( xpos, ypos, zpos) ); | |
9389 | ||
9390 | ypos -= frWebClampSh->GetZ(1); | |
9391 | moth->AddNode(frWebClamp,1, | |
9392 | new TGeoCombiTrans( xpos, ypos, zpos+forwWebTStirr3Sh->GetZ(1), | |
9393 | new TGeoRotation("", 0., 90., 0.) ) ); | |
9394 | ||
9395 | ypos -= webcamShape->GetDY()/2; | |
9396 | moth->AddNode(webCam,1, | |
9397 | new TGeoTranslation( xpos, ypos, | |
9398 | zpos+forwWebTStirr3Sh->GetZ(1)+webcamShape->GetDZ()) ); | |
9399 | ||
9400 | xpos = kForwLwHookWide/2 | |
9401 | + (forwWebSStirrSh->GetX(4) + forwWebSStirrSh->GetX(5))/2; | |
9402 | ypos = (forwLwHookMainBody->GetY(8) + forwLwHookMainBody->GetY(9))/2 | |
9403 | + forwWebSStirrSh->GetZ(1) - forwWebTStirr4Sh->GetY(7); | |
9404 | moth->AddNode(forwWebTStirr4,1, | |
9405 | new TGeoCombiTrans( xpos,-ypos, zpos, | |
9406 | new TGeoRotation("", 180., 0., 0.) ) ); | |
9407 | ||
9408 | ypos -= frWebClampSh->GetZ(1); | |
9409 | moth->AddNode(frWebClamp,2, | |
9410 | new TGeoCombiTrans( xpos,-ypos, zpos+forwWebTStirr4Sh->GetZ(1), | |
9411 | new TGeoRotation("", 0., 90., 0.) ) ); | |
9412 | ||
9413 | ypos -= webcamShape->GetDY()/2; | |
9414 | moth->AddNode(webCam,2, | |
9415 | new TGeoTranslation( xpos,-ypos, | |
9416 | zpos+forwWebTStirr4Sh->GetZ(1)+webcamShape->GetDZ()) ); | |
5ea15037 | 9417 | |
f0a991bf | 9418 | xpos = kRearUpHookWide/2 + kRearUpWebStirrDep/2; |
9419 | ypos = kRingCHeight; | |
9420 | zpos = kRingCZPos + kRingCThick; | |
9421 | moth->AddNode(upWebStirrup,1, | |
9422 | new TGeoCombiTrans( xpos, ypos,-zpos, | |
9423 | new TGeoRotation("",-90.,-90., 90.) ) ); | |
9424 | moth->AddNode(upWebStirrup,2, | |
9425 | new TGeoCombiTrans(-xpos, ypos,-zpos, | |
9426 | new TGeoRotation("",-90.,-90., 90.) ) ); | |
9427 | ||
9428 | ypos = kRingCHeight + upWebStirrSh->GetY(2) - upRearWebBarSh->GetDY(); | |
9429 | zpos = kRingCZPos + kRingCThick + upWebStirrSh->GetX(3) | |
9430 | - upRearWebBarSh->GetDZ(); | |
9431 | moth->AddNode(upRearWebBar,1, | |
9432 | new TGeoTranslation( 0, ypos,-zpos) ); | |
9433 | ||
9434 | zpos -= upRearWebBarSh->GetDZ(); | |
9435 | moth->AddNode(frWebClamp,3, | |
9436 | new TGeoCombiTrans( 0, ypos,-zpos, | |
9437 | new TGeoRotation("", 0., 90., 0.) ) ); | |
9438 | ||
9439 | ypos -= webcamShape->GetDY()/2; | |
9440 | zpos -= webcamShape->GetDZ(); | |
9441 | moth->AddNode(webCam,3, | |
9442 | new TGeoTranslation( 0, ypos,-zpos) ); | |
5ea15037 | 9443 | |
f0a991bf | 9444 | xpos = ringC2C3->GetX(14) + kUpperSlideWidth/2; |
9445 | ypos = ringC2C3->GetY(14); | |
9446 | zpos = kRingCZPos + kRingCThick; | |
9447 | moth->AddNode(upSlideVol,1, | |
9448 | new TGeoCombiTrans( xpos, ypos, zpos, | |
9449 | new TGeoRotation("",-90.,-90., 90.) ) ); | |
9450 | moth->AddNode(upSlideVol,2, | |
9451 | new TGeoCombiTrans(-xpos, ypos, zpos, | |
9452 | new TGeoRotation("",-90.,-90., 90.) ) ); | |
9453 | moth->AddNode(upSlideVol,3, | |
9454 | new TGeoCombiTrans( xpos, ypos, -zpos, | |
9455 | new TGeoRotation("", 90.,-90.,-90.) ) ); | |
9456 | moth->AddNode(upSlideVol,4, | |
9457 | new TGeoCombiTrans(-xpos, ypos, -zpos, | |
9458 | new TGeoRotation("", 90.,-90.,-90.) ) ); | |
9459 | ||
9460 | moth->AddNode(lwSlideVol,1, | |
9461 | new TGeoCombiTrans( xpos,-ypos,-zpos, | |
9462 | new TGeoRotation("",-90.,-90.,-90.) ) ); | |
9463 | moth->AddNode(lwSlideVol,2, | |
9464 | new TGeoCombiTrans(-xpos,-ypos,-zpos, | |
9465 | new TGeoRotation("",-90.,-90.,-90.) ) ); | |
9466 | moth->AddNode(lwSlideVol,3, | |
9467 | new TGeoCombiTrans( xpos,-ypos, zpos, | |
9468 | new TGeoRotation("", 90.,-90., 90.) ) ); | |
9469 | moth->AddNode(lwSlideVol,4, | |
9470 | new TGeoCombiTrans(-xpos,-ypos, zpos, | |
9471 | new TGeoRotation("", 90.,-90., 90.) ) ); | |
9472 | ||
9473 | ||
9474 | return; | |
9475 | } | |
9476 |