]>
Commit | Line | Data |
---|---|---|
172b0d90 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
cee918ed | 16 | // This class Defines the Geometry for the ITS services and support cones |
17 | // outside of the ceneteral volume (except for the Ceneteral support | |
18 | // cylinders. Other classes define the rest of the ITS. Specificaly the ITS | |
19 | // The SSD support cone,SSD Support centeral cylinder, SDD support cone, | |
20 | // The SDD cupport centeral cylinder, the SPD Thermal Sheald, The supports | |
21 | // and cable trays on both the RB26 (muon dump) and RB24 sides, and all of | |
22 | // the cabling from the ladders/stave ends out past the TPC. | |
23 | ||
172b0d90 | 24 | /* $Id$ */ |
172b0d90 | 25 | // General Root includes |
172b0d90 | 26 | #include <TMath.h> |
172b0d90 | 27 | // Root Geometry includes |
543b7370 | 28 | //#include <AliLog.h> |
172b0d90 | 29 | #include <TGeoManager.h> |
30 | #include <TGeoVolume.h> | |
31 | #include <TGeoPcon.h> | |
32 | #include <TGeoCone.h> | |
33 | #include <TGeoTube.h> // contaings TGeoTubeSeg | |
34 | #include <TGeoArb8.h> | |
db486a6e | 35 | #include <TGeoXtru.h> |
172b0d90 | 36 | #include <TGeoCompositeShape.h> |
37 | #include <TGeoMatrix.h> | |
172b0d90 | 38 | #include "AliITSv11GeometrySupport.h" |
39 | ||
40 | ClassImp(AliITSv11GeometrySupport) | |
41 | ||
42 | #define SQ(A) (A)*(A) | |
43 | ||
44 | //______________________________________________________________________ | |
a275e8ba | 45 | void AliITSv11GeometrySupport::SPDCone(TGeoVolume *moth,TGeoManager *mgr) |
46 | { | |
47 | // | |
48 | // Creates the SPD thermal shield as a volume assembly | |
49 | // and adds it to the mother volume | |
50 | // (this is actually a merge of the previous SPDThermalSheald method | |
51 | // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06 and the | |
52 | // CreateSPDThermalShield method of AliITSv11Hybrid) | |
53 | // | |
54 | // Input: | |
55 | // moth : the TGeoVolume owing the volume structure | |
56 | // mgr : the GeoManager (default gGeoManager) | |
57 | // Output: | |
58 | // | |
59 | // Created: ??? ??? | |
60 | // Updated: 11 Dec 2007 Mario Sitta | |
61 | // | |
62 | // Technical data are taken from: ALICE-Thermal Screen "Cone transition" | |
63 | // (thermal-screen1_a3.ps), "Cylinder" (thermal-screen2_a3.ps), "Half | |
64 | // assembly" (thermal-screen3_a3.ps), "Flange" (thermal-screen4_a3.ps) | |
65 | ||
66 | ||
67 | // Dimensions of the Central shield | |
fd5b6398 | 68 | const Double_t kHalfLengthCentral = 405.*fgkmm; |
a275e8ba | 69 | const Double_t kThicknessCentral = 0.4*fgkmm; |
70 | const Double_t kInnerRadiusCentral = 8.1475*fgkcm; | |
71 | const Double_t kOuterRadiusCentral = 9.9255*fgkcm; | |
72 | const Double_t kInnerACentral = 3.1674*fgkcm; | |
73 | const Double_t kInnerBCentral = 2.023 *fgkcm; | |
74 | const Double_t kOuterACentral = 2.4374*fgkcm; | |
75 | const Double_t kOuterBCentral = 3.8162*fgkcm; | |
76 | // Dimensions of the EndCap shield | |
77 | const Double_t kHalfLengthEndCap = 25.*fgkmm; | |
78 | const Double_t kThicknessEndCap = 2.0*fgkmm; | |
79 | const Double_t kInnerRadiusEndCap = 8.0775*fgkcm; | |
80 | const Double_t kOuterRadiusEndCap = 9.9955*fgkcm; | |
81 | const Double_t kInnerAEndCap = 3.1453*fgkcm; | |
82 | const Double_t kInnerBEndCap = 2.0009*fgkcm; | |
83 | const Double_t kOuterAEndCap = 2.4596*fgkcm; | |
84 | const Double_t kOuterBEndCap = 3.8384*fgkcm; | |
85 | // Dimensions of the Cone shield | |
86 | const Double_t kHalfLengthCone = 145.*fgkmm; | |
87 | const Double_t kThicknessCone = 0.3*fgkmm; | |
88 | const Double_t kInnerRadialCone = 37.3*fgkcm; | |
89 | const Double_t kOuterRadialCone = 39.0*fgkcm; | |
90 | const Double_t kInnerACone = 14.2344*fgkcm; | |
91 | // const Double_t kInnerBCone = 9.0915*fgkcm; | |
92 | const Double_t kOuterACone = 9.5058*fgkcm; | |
93 | // const Double_t kOuterBCone = 14.8831*fgkcm; | |
94 | // Dimensions of the Flange's Ring and Wing | |
95 | const Double_t kHalfLengthRing = 7.5*fgkmm; | |
96 | const Double_t kThicknessRing = 0.3*fgkmm; | |
97 | const Double_t kInnerRadiusRing = 37.3*fgkcm; | |
98 | const Double_t kOuterRadiusRing = 42.0*fgkcm; | |
99 | const Double_t kOuterRadiusWing = 49.25*fgkcm; | |
100 | const Double_t kWideWing = 6.0*fgkcm; | |
101 | const Double_t kThetaWing = 45.0; | |
102 | // Common data | |
103 | const Double_t kTheta = 36.0*TMath::DegToRad(); | |
104 | const Double_t kThicknessOmega = 0.3*fgkmm; | |
105 | ||
106 | // Local variables | |
107 | Double_t x, y; | |
108 | Double_t xshld[24], yshld[24]; | |
109 | Double_t xair[24] , yair[24]; | |
110 | Double_t xomega[48], yomega[48]; | |
111 | // Double_t *xyarb8; | |
112 | ||
113 | // The entire shield is made up of two half central shields | |
114 | // symmetric with respect to the XZ plane, four half end cap | |
115 | // shields, again symmetric with respect to the XZ plane, and four | |
116 | // half cones, symmetric with respect to the XZ plane too. | |
117 | ||
118 | TGeoVolumeAssembly *vM = new TGeoVolumeAssembly("ITSspdThermalShield"); | |
119 | ||
120 | // The central half shield: a half tube of carbon fiber, | |
121 | // a similar but proportionally smaller half tube of air inside it, | |
122 | // and a Omega-shaped carbon fiber insert inside the air. | |
123 | // They are all XTru shapes | |
124 | ||
125 | TGeoXtru *centralshape = new TGeoXtru(2); | |
126 | ||
127 | CreateSPDThermalShape(kInnerACentral,kInnerBCentral,kInnerRadiusCentral, | |
128 | kOuterACentral,kOuterBCentral,kOuterRadiusCentral, | |
129 | kTheta,xshld,yshld); | |
130 | ||
131 | centralshape->DefinePolygon(24,xshld,yshld); | |
132 | centralshape->DefineSection(0,-kHalfLengthCentral); | |
133 | centralshape->DefineSection(1, kHalfLengthCentral); | |
134 | ||
135 | // Now rescale to get the air volume dimensions | |
136 | InsidePoint(xshld[23], yshld[23], | |
137 | xshld[ 0], yshld[ 0], | |
138 | xshld[ 1], yshld[ 1], kThicknessCentral, | |
139 | xair[0], yair[0]); | |
140 | for (Int_t i=1; i<23; i++) { | |
141 | InsidePoint(xshld[i-1], yshld[i-1], | |
142 | xshld[ i ], yshld[ i ], | |
143 | xshld[i+1], yshld[i+1], kThicknessCentral, | |
144 | xair[i], yair[i]); | |
145 | } | |
146 | InsidePoint(xshld[22], yshld[22], | |
147 | xshld[23], yshld[23], | |
148 | xshld[ 0], yshld[ 0], kThicknessCentral, | |
149 | xair[23], yair[23]); | |
150 | ||
151 | // Create the air shape | |
152 | TGeoXtru *centralairshape = new TGeoXtru(2); | |
153 | ||
154 | centralairshape->DefinePolygon(24,xair,yair); | |
155 | centralairshape->DefineSection(0,-kHalfLengthCentral); | |
156 | centralairshape->DefineSection(1, kHalfLengthCentral); | |
157 | ||
158 | // Create the Omega insert | |
159 | TGeoXtru *centralomegashape = new TGeoXtru(2); | |
160 | ||
161 | CreateSPDOmegaShape(xair,yair,kTheta,kThicknessOmega,xomega,yomega); | |
162 | ||
163 | centralomegashape->DefinePolygon(48,xomega,yomega); | |
164 | centralomegashape->DefineSection(0,-kHalfLengthCentral); | |
165 | centralomegashape->DefineSection(1, kHalfLengthCentral); | |
166 | ||
167 | // The end cap half shield: a half tube of carbon fiber, | |
168 | // a similar but proportionally smaller half tube of air inside it, | |
169 | // and a Omega-shaped carbon fiber insert inside the air. | |
170 | // They are all XTru shapes | |
171 | ||
172 | TGeoXtru *endcapshape = new TGeoXtru(2); | |
173 | ||
174 | CreateSPDThermalShape(kInnerAEndCap,kInnerBEndCap,kInnerRadiusEndCap, | |
175 | kOuterAEndCap,kOuterBEndCap,kOuterRadiusEndCap, | |
176 | kTheta,xshld,yshld); | |
177 | ||
178 | endcapshape->DefinePolygon(24,xshld,yshld); | |
179 | endcapshape->DefineSection(0,-kHalfLengthEndCap); | |
180 | endcapshape->DefineSection(1, kHalfLengthEndCap); | |
181 | ||
182 | // Now rescale to get the air volume dimensions | |
183 | InsidePoint(xshld[23], yshld[23], | |
184 | xshld[ 0], yshld[ 0], | |
185 | xshld[ 1], yshld[ 1], kThicknessEndCap, | |
186 | xair[0], yair[0]); | |
187 | for (Int_t i=1; i<23; i++) { | |
188 | InsidePoint(xshld[i-1], yshld[i-1], | |
189 | xshld[ i ], yshld[ i ], | |
190 | xshld[i+1], yshld[i+1], kThicknessEndCap, | |
191 | xair[i], yair[i]); | |
192 | } | |
193 | InsidePoint(xshld[22], yshld[22], | |
194 | xshld[23], yshld[23], | |
195 | xshld[ 0], yshld[ 0], kThicknessEndCap, | |
196 | xair[23], yair[23]); | |
197 | ||
198 | // Create the air shape | |
199 | TGeoXtru *endcapairshape = new TGeoXtru(2); | |
200 | ||
201 | endcapairshape->DefinePolygon(24,xair,yair); | |
202 | endcapairshape->DefineSection(0,-kHalfLengthEndCap); | |
203 | endcapairshape->DefineSection(1, kHalfLengthEndCap); | |
204 | ||
205 | // Create the Omega insert | |
206 | TGeoXtru *endcapomegashape = new TGeoXtru(2); | |
207 | ||
208 | CreateSPDOmegaShape(xair,yair,kTheta,kThicknessOmega,xomega,yomega); | |
209 | ||
210 | endcapomegashape->DefinePolygon(48,xomega,yomega); | |
211 | endcapomegashape->DefineSection(0,-kHalfLengthEndCap); | |
212 | endcapomegashape->DefineSection(1, kHalfLengthEndCap); | |
213 | ||
214 | // The cone half shield is more complex since there is no basic | |
215 | // TGeo shape to describe it correctly. So it is made of a series | |
216 | // of TGeoArb8 shapes filled with air, which all together make up the | |
217 | // the cone AND its internal insert. Part of the following code is | |
218 | // adapted from SPDThermalSheald method. | |
219 | ||
220 | // Filled portions | |
221 | TGeoArb8 *sC1 = new TGeoArb8(kHalfLengthCone); | |
222 | TGeoArb8 *sC2 = new TGeoArb8(kHalfLengthCone); | |
223 | ||
224 | CreateSPDThermalShape(kInnerACentral,kInnerBCentral,kInnerRadiusCentral, | |
225 | kOuterACentral,kOuterBCentral,kOuterRadiusCentral, | |
226 | kTheta,xshld,yshld); | |
227 | ||
228 | sC1->SetVertex(0,xshld[12],yshld[12]); | |
229 | sC1->SetVertex(1,xshld[11],yshld[11]); | |
230 | sC1->SetVertex(2,xshld[ 0],yshld[ 0]); | |
231 | sC1->SetVertex(3,xshld[23],yshld[23]); | |
232 | ||
233 | sC2->SetVertex(0,xshld[11],yshld[11]); | |
234 | sC2->SetVertex(1,xshld[10],yshld[10]); | |
235 | sC2->SetVertex(2,xshld[ 1],yshld[ 1]); | |
236 | sC2->SetVertex(3,xshld[ 0],yshld[ 0]); | |
237 | ||
238 | // Drawings give only the radius, convert it to the apothegm | |
239 | Double_t kInnerRadiusCone = TMath::Sqrt(kInnerRadialCone*kInnerRadialCone | |
240 | - 0.25*kInnerACone*kInnerACone); | |
241 | Double_t kOuterRadiusCone = TMath::Sqrt(kOuterRadialCone*kOuterRadialCone | |
242 | - 0.25*kOuterACone*kOuterACone); | |
243 | ||
244 | Double_t xco[4], yco[4], xci[4], yci[4]; | |
245 | ||
246 | for (Int_t i=0; i<2; i++) { | |
247 | Double_t th = i*kTheta*TMath::RadToDeg(); | |
248 | xco[2*i ] = kOuterRadiusCone*SinD(th) - 0.5*kOuterACone*CosD(th); | |
249 | yco[2*i ] = kOuterRadiusCone*CosD(th) + 0.5*kOuterACone*SinD(th); | |
250 | xci[2*i ] = kInnerRadiusCone*SinD(th) - 0.5*kInnerACone*CosD(th); | |
251 | yci[2*i ] = kInnerRadiusCone*CosD(th) + 0.5*kInnerACone*SinD(th); | |
252 | xco[2*i+1] = kOuterRadiusCone*SinD(th) + 0.5*kOuterACone*CosD(th); | |
253 | yco[2*i+1] = kOuterRadiusCone*CosD(th) - 0.5*kOuterACone*SinD(th); | |
254 | xci[2*i+1] = kInnerRadiusCone*SinD(th) + 0.5*kInnerACone*CosD(th); | |
255 | yci[2*i+1] = kInnerRadiusCone*CosD(th) - 0.5*kInnerACone*SinD(th); | |
256 | } | |
257 | ||
258 | sC1->SetVertex(4,xco[0],yco[0]); | |
259 | sC1->SetVertex(5,xco[1],yco[1]); | |
260 | sC1->SetVertex(6,xci[1],yci[1]); | |
261 | sC1->SetVertex(7,xci[0],yci[0]); | |
262 | ||
263 | sC2->SetVertex(4,xco[1],yco[1]); | |
264 | sC2->SetVertex(5,xco[2],yco[2]); | |
265 | sC2->SetVertex(6,xci[2],yci[2]); | |
266 | sC2->SetVertex(7,xci[1],yci[1]); | |
267 | ||
268 | // Air holes | |
269 | TGeoArb8 *sCh1 = new TGeoArb8(kHalfLengthCone); | |
270 | TGeoArb8 *sCh2 = new TGeoArb8(kHalfLengthCone); | |
271 | ||
272 | for(Int_t i=0; i<4; i++){ | |
273 | InsidePoint(sC1->GetVertices()[((i+3)%4)*2+0], | |
274 | sC1->GetVertices()[((i+3)%4)*2+1], | |
275 | sC1->GetVertices()[i*2+0], | |
276 | sC1->GetVertices()[i*2+1], | |
277 | sC1->GetVertices()[((i+1)%4)*2+0], | |
278 | sC1->GetVertices()[((i+1)%4)*2+1],-kThicknessCone,x,y); | |
279 | sCh1->SetVertex(i,x,y); | |
280 | ||
281 | InsidePoint(sC1->GetVertices()[((i+3)%4 +4)*2+0], | |
282 | sC1->GetVertices()[((i+3)%4 +4)*2+1], | |
283 | sC1->GetVertices()[(i+4)*2+0], | |
284 | sC1->GetVertices()[(i+4)*2+1], | |
285 | sC1->GetVertices()[((i+1)%4 +4)*2+0], | |
286 | sC1->GetVertices()[((i+1)%4 +4)*2+1],-kThicknessCone,x,y); | |
287 | sCh1->SetVertex(i+4,x,y); | |
288 | ||
289 | InsidePoint(sC2->GetVertices()[((i+3)%4)*2+0], | |
290 | sC2->GetVertices()[((i+3)%4)*2+1], | |
291 | sC2->GetVertices()[i*2+0], | |
292 | sC2->GetVertices()[i*2+1], | |
293 | sC2->GetVertices()[((i+1)%4)*2+0], | |
294 | sC2->GetVertices()[((i+1)%4)*2+1],-kThicknessCone,x,y); | |
295 | sCh2->SetVertex(i,x,y); | |
296 | ||
297 | InsidePoint(sC2->GetVertices()[((i+3)%4 +4)*2+0], | |
298 | sC2->GetVertices()[((i+3)%4 +4)*2+1], | |
299 | sC2->GetVertices()[(i+4)*2+0], | |
300 | sC2->GetVertices()[(i+4)*2+1], | |
301 | sC2->GetVertices()[((i+1)%4 +4)*2+0], | |
302 | sC2->GetVertices()[((i+1)%4 +4)*2+1],-kThicknessCone,x,y); | |
303 | sCh2->SetVertex(i+4,x,y); | |
304 | } | |
305 | ||
306 | // Finally the carbon fiber Ring with its Wings and their | |
307 | // stesalite inserts. They are Tube and TubeSeg shapes | |
308 | ||
309 | TGeoTube *ringshape = new TGeoTube(kInnerRadiusRing,kOuterRadiusRing, | |
310 | kHalfLengthRing); | |
311 | ||
312 | TGeoTube *ringinsertshape = new TGeoTube(kInnerRadiusRing+kThicknessRing, | |
313 | kOuterRadiusRing-kThicknessRing, | |
314 | kHalfLengthRing-kThicknessRing); | |
315 | ||
316 | Double_t angleWideWing, angleWideWingThickness; | |
317 | angleWideWing = (kWideWing/kOuterRadiusWing)*TMath::RadToDeg(); | |
318 | angleWideWingThickness = (kThicknessRing/kOuterRadiusWing)*TMath::RadToDeg(); | |
319 | ||
320 | TGeoTubeSeg *wingshape = new TGeoTubeSeg(kOuterRadiusRing,kOuterRadiusWing, | |
321 | kHalfLengthRing, 0, angleWideWing); | |
322 | ||
323 | TGeoTubeSeg *winginsertshape = new TGeoTubeSeg(kOuterRadiusRing, | |
324 | kOuterRadiusWing-kThicknessRing, kHalfLengthRing-kThicknessRing, | |
325 | angleWideWingThickness, angleWideWing-angleWideWingThickness); | |
326 | ||
327 | ||
328 | // We have the shapes: now create the real volumes | |
329 | ||
330 | TGeoMedium *medSPDcf = mgr->GetMedium("ITS_SPD shield$"); | |
331 | TGeoMedium *medSPDair = mgr->GetMedium("ITS_SPD AIR$"); | |
332 | TGeoMedium *medSPDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite | |
333 | ||
334 | TGeoVolume *centralshield = new TGeoVolume("SPDcentralshield", | |
335 | centralshape,medSPDcf); | |
336 | centralshield->SetVisibility(kTRUE); | |
337 | centralshield->SetLineColor(7); | |
338 | centralshield->SetLineWidth(1); | |
339 | ||
340 | TGeoVolume *centralairshield = new TGeoVolume("SPDcentralairshield", | |
341 | centralairshape,medSPDair); | |
342 | centralairshield->SetVisibility(kTRUE); | |
343 | centralairshield->SetLineColor(5); // Yellow | |
344 | centralairshield->SetLineWidth(1); | |
345 | centralairshield->SetFillColor(centralairshield->GetLineColor()); | |
346 | centralairshield->SetFillStyle(4090); // 90% transparent | |
347 | ||
348 | TGeoVolume *centralomega = new TGeoVolume("SPDcentralomega", | |
349 | centralomegashape,medSPDcf); | |
350 | centralomega->SetVisibility(kTRUE); | |
351 | centralomega->SetLineColor(7); | |
352 | centralomega->SetLineWidth(1); | |
353 | ||
354 | centralairshield->AddNode(centralomega,1,0); | |
355 | centralshield->AddNode(centralairshield,1,0); | |
356 | ||
357 | TGeoVolume *endcapshield = new TGeoVolume("SPDendcapshield", | |
358 | endcapshape,medSPDcf); | |
359 | endcapshield->SetVisibility(kTRUE); | |
360 | endcapshield->SetLineColor(7); | |
361 | endcapshield->SetLineWidth(1); | |
362 | ||
363 | TGeoVolume *endcapairshield = new TGeoVolume("SPDendcapairshield", | |
364 | endcapairshape,medSPDair); | |
365 | endcapairshield->SetVisibility(kTRUE); | |
366 | endcapairshield->SetLineColor(5); // Yellow | |
367 | endcapairshield->SetLineWidth(1); | |
368 | endcapairshield->SetFillColor(endcapairshield->GetLineColor()); | |
369 | endcapairshield->SetFillStyle(4090); // 90% transparent | |
370 | ||
371 | TGeoVolume *endcapomega = new TGeoVolume("SPDendcapomega", | |
372 | endcapomegashape,medSPDcf); | |
373 | endcapomega->SetVisibility(kTRUE); | |
374 | endcapomega->SetLineColor(7); | |
375 | endcapomega->SetLineWidth(1); | |
376 | ||
377 | endcapairshield->AddNode(endcapomega,1,0); | |
378 | endcapshield->AddNode(endcapairshield,1,0); | |
379 | ||
380 | TGeoVolume *vC1 = new TGeoVolume("SPDconeshieldV1",sC1,medSPDcf); | |
381 | vC1->SetVisibility(kTRUE); | |
382 | vC1->SetLineColor(7); | |
383 | vC1->SetLineWidth(1); | |
384 | ||
385 | TGeoVolume *vCh1 = new TGeoVolume("SPDconeshieldH1",sCh1,medSPDair); | |
386 | ||
387 | vCh1->SetVisibility(kTRUE); | |
388 | vCh1->SetLineColor(5); // Yellow | |
389 | vCh1->SetLineWidth(1); | |
390 | vCh1->SetFillColor(vCh1->GetLineColor()); | |
391 | vCh1->SetFillStyle(4090); // 90% transparent | |
392 | ||
393 | vC1->AddNode(vCh1,1,0); | |
394 | ||
395 | TGeoVolume *vC2 = new TGeoVolume("SPDconeshieldV2",sC2,medSPDcf); | |
396 | ||
397 | vC2->SetVisibility(kTRUE); | |
398 | vC2->SetLineColor(7); | |
399 | vC2->SetLineWidth(1); | |
400 | ||
401 | TGeoVolume *vCh2 = new TGeoVolume("SPDconeshieldH2",sCh2,medSPDair); | |
402 | ||
403 | vCh2->SetVisibility(kTRUE); | |
404 | vCh2->SetLineColor(5); // Yellow | |
405 | vCh2->SetLineWidth(1); | |
406 | vCh2->SetFillColor(vCh2->GetLineColor()); | |
407 | vCh2->SetFillStyle(4090); // 90% transparent | |
408 | ||
409 | vC2->AddNode(vCh2,1,0); | |
410 | ||
411 | TGeoVolume *ring = new TGeoVolume("SPDshieldring",ringshape,medSPDcf); | |
412 | ring->SetVisibility(kTRUE); | |
413 | ring->SetLineColor(7); | |
414 | ring->SetLineWidth(1); | |
415 | ||
416 | TGeoVolume *ringinsert = new TGeoVolume("SPDshieldringinsert", | |
417 | ringinsertshape,medSPDste); | |
418 | ringinsert->SetVisibility(kTRUE); | |
419 | ringinsert->SetLineColor(3); // Green | |
420 | // ringinsert->SetLineWidth(1); | |
421 | ringinsert->SetFillColor(ringinsert->GetLineColor()); | |
422 | ringinsert->SetFillStyle(4010); // 10% transparent | |
423 | ||
424 | ring->AddNode(ringinsert,1,0); | |
425 | ||
426 | TGeoVolume *wing = new TGeoVolume("SPDshieldringwing",wingshape,medSPDcf); | |
427 | wing->SetVisibility(kTRUE); | |
428 | wing->SetLineColor(7); | |
429 | wing->SetLineWidth(1); | |
430 | ||
431 | TGeoVolume *winginsert = new TGeoVolume("SPDshieldringinsert", | |
432 | winginsertshape,medSPDste); | |
433 | winginsert->SetVisibility(kTRUE); | |
434 | winginsert->SetLineColor(3); // Green | |
435 | // winginsert->SetLineWidth(1); | |
436 | winginsert->SetFillColor(winginsert->GetLineColor()); | |
437 | winginsert->SetFillStyle(4010); // 10% transparent | |
438 | ||
439 | wing->AddNode(winginsert,1,0); | |
440 | ||
441 | ||
442 | // Add all volumes in the assembly | |
443 | vM->AddNode(centralshield,1,0); | |
444 | vM->AddNode(centralshield,2,new TGeoRotation("",180,0,0)); | |
445 | ||
446 | vM->AddNode(endcapshield,1, | |
447 | new TGeoTranslation(0,0, kHalfLengthCentral+kHalfLengthEndCap)); | |
448 | vM->AddNode(endcapshield,2, | |
449 | new TGeoTranslation(0,0,-kHalfLengthCentral-kHalfLengthEndCap)); | |
450 | vM->AddNode(endcapshield,3,new TGeoCombiTrans( | |
451 | 0, 0, kHalfLengthCentral+kHalfLengthEndCap, | |
452 | new TGeoRotation("",180,0,0) ) ); | |
453 | vM->AddNode(endcapshield,4,new TGeoCombiTrans( | |
454 | 0, 0,-kHalfLengthCentral-kHalfLengthEndCap, | |
455 | new TGeoRotation("",180,0,0) ) ); | |
456 | ||
457 | for (Int_t i=0; i<10; i++) { | |
458 | Double_t thetaC12 = kTheta*TMath::RadToDeg(); | |
459 | vM->AddNode(vC1,2*i+1, new TGeoCombiTrans( | |
460 | 0, 0, kHalfLengthCentral+2*kHalfLengthEndCap+kHalfLengthCone, | |
461 | new TGeoRotation("",0, 0,i*thetaC12) ) ); | |
462 | vM->AddNode(vC1,2*i+2, new TGeoCombiTrans( | |
463 | 0, 0, -kHalfLengthCentral-2*kHalfLengthEndCap-kHalfLengthCone, | |
464 | new TGeoRotation("",0,180,i*thetaC12) ) ); | |
465 | vM->AddNode(vC2,2*i+1, new TGeoCombiTrans( | |
466 | 0, 0, kHalfLengthCentral+2*kHalfLengthEndCap+kHalfLengthCone, | |
467 | new TGeoRotation("",0, 0,i*thetaC12) ) ); | |
468 | vM->AddNode(vC2,2*i+2, new TGeoCombiTrans( | |
469 | 0, 0, -kHalfLengthCentral-2*kHalfLengthEndCap-kHalfLengthCone, | |
470 | new TGeoRotation("",0,180,i*thetaC12) ) ); | |
471 | } | |
472 | ||
473 | vM->AddNode(ring,1,new TGeoTranslation(0, 0, | |
474 | kHalfLengthCentral+2*kHalfLengthEndCap+2*kHalfLengthCone | |
475 | +kHalfLengthRing)); | |
476 | vM->AddNode(ring,2,new TGeoTranslation(0, 0, | |
477 | -kHalfLengthCentral-2*kHalfLengthEndCap-2*kHalfLengthCone | |
478 | -kHalfLengthRing)); | |
479 | ||
480 | for (Int_t i=0; i<4; i++) { | |
481 | Double_t thetaW = kThetaWing*(2*i+1); | |
482 | vM->AddNode(wing,2*i+1,new TGeoCombiTrans(0, 0, | |
483 | kHalfLengthCentral+2*kHalfLengthEndCap+2*kHalfLengthCone | |
484 | +kHalfLengthRing, new TGeoRotation("",thetaW,0,0) )); | |
485 | vM->AddNode(wing,2*i+2,new TGeoCombiTrans(0, 0, | |
486 | -kHalfLengthCentral-2*kHalfLengthEndCap-2*kHalfLengthCone | |
487 | -kHalfLengthRing, new TGeoRotation("",thetaW,0,0) )); | |
488 | } | |
489 | ||
490 | // Some debugging if requested | |
491 | if(GetDebug(1)){ | |
492 | vM->PrintNodes(); | |
493 | vM->InspectShape(); | |
494 | } | |
495 | ||
496 | // Finally put the entire shield in the mother volume | |
497 | moth->AddNode(vM,1,0); | |
498 | ||
499 | return; | |
500 | } | |
501 | ||
502 | //______________________________________________________________________ | |
503 | void AliITSv11GeometrySupport::CreateSPDThermalShape( | |
504 | Double_t ina, Double_t inb, Double_t inr, | |
505 | Double_t oua, Double_t oub, Double_t our, | |
506 | Double_t t, Double_t *x , Double_t *y ) | |
507 | { | |
508 | // | |
509 | // Creates the proper sequence of X and Y coordinates to determine | |
510 | // the base XTru polygon for the SPD thermal shapes | |
511 | // | |
512 | // Input: | |
513 | // ina, inb : inner shape sides | |
514 | // inr : inner radius | |
515 | // oua, oub : outer shape sides | |
516 | // our : outer radius | |
517 | // t : theta angle | |
518 | // | |
519 | // Output: | |
520 | // x, y : coordinate vectors [24] | |
521 | // | |
522 | // Created: 14 Nov 2007 Mario Sitta | |
523 | // Updated: 11 Dec 2007 Mario Sitta | |
524 | // | |
525 | Double_t xlocal[6],ylocal[6]; | |
526 | ||
527 | //Create the first inner quadrant (X > 0) | |
528 | FillSPDXtruShape(ina,inb,inr,t,xlocal,ylocal); | |
529 | for (Int_t i=0; i<6; i++) { | |
530 | x[i] = xlocal[i]; | |
531 | y[i] = ylocal[i]; | |
532 | } | |
533 | ||
534 | // Then reflex on the second quadrant (X < 0) | |
535 | for (Int_t i=0; i<6; i++) { | |
536 | x[23-i] = -x[i]; | |
537 | y[23-i] = y[i]; | |
538 | } | |
539 | ||
540 | // Now create the first outer quadrant (X > 0) | |
541 | FillSPDXtruShape(oua,oub,our,t,xlocal,ylocal); | |
542 | for (Int_t i=0; i<6; i++) { | |
543 | x[11-i] = xlocal[i]; | |
544 | y[11-i] = ylocal[i]; | |
545 | } | |
546 | ||
547 | // Finally reflex on the second quadrant (X < 0) | |
548 | for (Int_t i=0; i<6; i++) { | |
549 | x[12+i] = -x[11-i]; | |
550 | y[12+i] = y[11-i]; | |
551 | } | |
552 | ||
553 | return; | |
554 | } | |
555 | ||
556 | //______________________________________________________________________ | |
557 | void AliITSv11GeometrySupport::CreateSPDOmegaShape( | |
558 | Double_t *xin, Double_t *yin, Double_t t, | |
559 | Double_t d, Double_t *x, Double_t *y) | |
560 | { | |
561 | // | |
562 | // Creates the proper sequence of X and Y coordinates to determine | |
563 | // the SPD Omega XTru polygon | |
564 | // | |
565 | // Input: | |
566 | // xin, yin : coordinates of the air volume | |
567 | // d : Omega shape thickness | |
568 | // t : theta angle | |
569 | // | |
570 | // Output: | |
571 | // x, y : coordinate vectors [48] | |
572 | // | |
573 | // Created: 17 Nov 2007 Mario Sitta | |
574 | // Updated: 11 Dec 2007 Mario Sitta | |
575 | // | |
576 | Double_t xlocal[6],ylocal[6]; | |
577 | ||
578 | // First determine various parameters | |
579 | Double_t ina = TMath::Sqrt( (xin[23]-xin[0])*(xin[23]-xin[0]) + | |
580 | (yin[23]-yin[0])*(yin[23]-yin[0]) ); | |
581 | Double_t inb = TMath::Sqrt( (xin[ 1]-xin[0])*(xin[ 1]-xin[0]) + | |
582 | (yin[ 1]-yin[0])*(yin[ 1]-yin[0]) ); | |
583 | Double_t inr = yin[0]; | |
584 | Double_t oua = TMath::Sqrt( (xin[12]-xin[11])*(xin[12]-xin[11]) + | |
585 | (yin[12]-yin[11])*(yin[12]-yin[11]) ); | |
586 | Double_t oub = TMath::Sqrt( (xin[10]-xin[11])*(xin[10]-xin[11]) + | |
587 | (yin[10]-yin[11])*(yin[10]-yin[11]) ); | |
588 | Double_t our = yin[11]; | |
589 | ||
590 | //Create the first inner pseudo-quadrant | |
591 | FillSPDXtruShape(ina,inb,inr,t,xlocal,ylocal); | |
592 | x[ 1] = xlocal[0]; | |
593 | y[ 1] = ylocal[0]; | |
594 | ||
595 | x[ 2] = xlocal[1]; | |
596 | y[ 2] = ylocal[1]; | |
597 | ||
598 | x[ 5] = xlocal[2]; | |
599 | y[ 5] = ylocal[2]; | |
600 | ||
601 | x[ 6] = xlocal[3]; | |
602 | y[ 6] = ylocal[3]; | |
603 | ||
604 | x[ 9] = xlocal[4]; | |
605 | y[ 9] = ylocal[4]; | |
606 | ||
607 | x[10] = xlocal[5]; | |
608 | y[10] = ylocal[5]; | |
609 | ||
610 | //Create the first outer pseudo-quadrant | |
611 | FillSPDXtruShape(oua,oub,our,t,xlocal,ylocal); | |
612 | x[23] = xlocal[0]; | |
613 | y[23] = ylocal[0]; | |
614 | ||
615 | x[20] = xlocal[1]; | |
616 | y[20] = ylocal[1]; | |
617 | ||
618 | x[19] = xlocal[2]; | |
619 | y[19] = ylocal[2]; | |
620 | ||
621 | x[16] = xlocal[3]; | |
622 | y[16] = ylocal[3]; | |
623 | ||
624 | x[15] = xlocal[4]; | |
625 | y[15] = ylocal[4]; | |
626 | ||
627 | x[11] = xlocal[5]; | |
628 | y[11] = ylocal[5]; | |
629 | ||
630 | //Create the second inner pseudo-quadrant | |
631 | FillSPDXtruShape(ina+2*d,inb-2*d,inr+d,t,xlocal,ylocal); | |
632 | x[22] = xlocal[0]; | |
633 | y[22] = ylocal[0]; | |
634 | ||
635 | x[21] = xlocal[1]; | |
636 | y[21] = ylocal[1]; | |
637 | ||
638 | x[18] = xlocal[2]; | |
639 | y[18] = ylocal[2]; | |
640 | ||
641 | x[17] = xlocal[3]; | |
642 | y[17] = ylocal[3]; | |
643 | ||
644 | x[14] = xlocal[4]; | |
645 | y[14] = ylocal[4]; | |
646 | ||
647 | x[13] = xlocal[5]; | |
648 | y[13] = ylocal[5]; | |
649 | ||
650 | //Create the second outer pseudo-quadrant | |
651 | FillSPDXtruShape(oua-2*d,oub+2*d,our-d,t,xlocal,ylocal); | |
652 | x[ 0] = xlocal[0]; | |
653 | y[ 0] = ylocal[0]; | |
654 | ||
655 | x[ 3] = xlocal[1]; | |
656 | y[ 3] = ylocal[1]; | |
657 | ||
658 | x[ 4] = xlocal[2]; | |
659 | y[ 4] = ylocal[2]; | |
660 | ||
661 | x[ 7] = xlocal[3]; | |
662 | y[ 7] = ylocal[3]; | |
663 | ||
664 | x[ 8] = xlocal[4]; | |
665 | y[ 8] = ylocal[4]; | |
666 | ||
667 | x[12] = xlocal[5]; | |
668 | y[12] = ylocal[5]; | |
669 | ||
670 | // These need to be fixed explicitly | |
671 | y[10] = yin[5]; | |
672 | y[11] = yin[6]; | |
673 | x[12] = x[11]; | |
674 | y[12] = y[11] + d; | |
675 | x[13] = x[10] + d; | |
676 | y[13] = y[12]; | |
677 | ||
678 | // Finally reflex on the negative side | |
679 | for (Int_t i=0; i<24; i++) { | |
680 | x[24+i] = -x[23-i]; | |
681 | y[24+i] = y[23-i]; | |
682 | } | |
683 | ||
684 | // Wow ! We've finished | |
685 | return; | |
172b0d90 | 686 | } |
a275e8ba | 687 | |
172b0d90 | 688 | //______________________________________________________________________ |
a275e8ba | 689 | void AliITSv11GeometrySupport::FillSPDXtruShape(Double_t a, Double_t b, |
690 | Double_t r, Double_t t, | |
691 | Double_t *x, Double_t *y) | |
692 | { | |
693 | // | |
694 | // Creates the partial sequence of X and Y coordinates to determine | |
695 | // the lateral part of the SPD thermal shield | |
696 | // | |
697 | // Input: | |
698 | // a, b : shape sides | |
699 | // r : radius | |
700 | // t : theta angle | |
701 | // | |
702 | // Output: | |
703 | // x, y : coordinate vectors [6] | |
704 | // | |
705 | // Created: 14 Nov 2007 Mario Sitta | |
706 | // | |
707 | x[0] = a/2; | |
708 | y[0] = r; | |
709 | ||
710 | x[1] = x[0] + b * TMath::Cos(t/2); | |
711 | y[1] = y[0] - b * TMath::Sin(t/2); | |
712 | ||
713 | x[2] = x[1] + a * TMath::Cos(t); | |
714 | y[2] = y[1] - a * TMath::Sin(t); | |
715 | ||
716 | x[3] = x[2] + b * TMath::Cos(3*t/2); | |
717 | y[3] = y[2] - b * TMath::Sin(3*t/2); | |
718 | ||
719 | x[4] = x[3] + a * TMath::Cos(2*t); | |
720 | y[4] = y[3] - a * TMath::Sin(2*t); | |
721 | ||
722 | x[5] = x[4]; | |
723 | y[5] = 0.; | |
724 | ||
725 | return; | |
172b0d90 | 726 | } |
a275e8ba | 727 | |
172b0d90 | 728 | //______________________________________________________________________ |
7d6c23de | 729 | void AliITSv11GeometrySupport::SDDCone(TGeoVolume *moth,TGeoManager *mgr) |
730 | { | |
731 | // | |
732 | // Creates the SDD support cone and cylinder geometry as a | |
733 | // volume assembly and adds it to the mother volume | |
734 | // (part of this code is taken or anyway inspired to SDDCone method | |
735 | // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
736 | // | |
737 | // Input: | |
738 | // moth : the TGeoVolume owing the volume structure | |
739 | // mgr : the GeoManager (default gGeoManager) | |
740 | // Output: | |
741 | // | |
742 | // Created: ??? Bjorn S. Nilsen | |
743 | // Updated: 18 Feb 2008 Mario Sitta | |
744 | // | |
745 | // Technical data are taken from: "Supporto Generale Settore SDD" | |
746 | // (technical drawings ALR-0816/1-B), "Supporto Globale Settore SDD" | |
747 | // (technical drawings ALR-0816/2A, ALR-0816/2B, ALR-0816/2C, ALR-0816/2D), | |
748 | // private communication with B. Giraudo | |
749 | ||
750 | // Dimensions of the Central cylinder and flanges | |
751 | const Double_t kCylinderHalfLength = (790.0/2)*fgkmm; | |
752 | const Double_t kCylinderInnerR = (210.0/2)*fgkmm; | |
753 | const Double_t kCylinderOuterR = (231.0/2)*fgkmm; | |
754 | const Double_t kFlangeHalfLength = ( 15.0/2)*fgkmm; | |
755 | const Double_t kFlangeInnerR = (210.5/2)*fgkmm; | |
756 | const Double_t kFlangeOuterR = (230.5/2)*fgkmm; | |
757 | const Double_t kInsertoHalfLength = | |
758 | kCylinderHalfLength - 2*kFlangeHalfLength; | |
759 | // const Double_t kCFThickness = kFlangeInnerR - kCylinderInnerR; | |
760 | const Double_t kBoltDiameter = 6.0*fgkmm; // M6 screw | |
761 | const Double_t kBoltDepth = 6.0*fgkmm; // In the flange | |
762 | const Double_t kBoltRadius = (220.0/2)*fgkmm; // Radius in flange | |
763 | const Double_t kThetaBolt = 30.0*fgkDegree; | |
764 | const Int_t kNBolts = (Int_t)(360.0/kThetaBolt); | |
765 | // Dimensions of the Cone | |
766 | const Double_t kConeROutMin = (540.0/2)*fgkmm; | |
767 | const Double_t kConeROutMax = (560.0/2)*fgkmm; | |
3a299c65 | 768 | const Double_t kConeRCurv = 10.0*fgkmm; // Radius of curvature |
7d6c23de | 769 | const Double_t kConeRinMin = (210.0/2)*fgkmm; |
770 | const Double_t kConeRinMax = (216.0/2)*fgkmm; | |
771 | const Double_t kConeRinCylinder = (231.0/2)*fgkmm; | |
3a299c65 | 772 | const Double_t kConeZCylinder = 192.0*fgkmm; |
7d6c23de | 773 | const Double_t kConeZOuterMilled = 23.0*fgkmm; |
774 | const Double_t kConeDZin = 15.0*fgkmm; // ??? | |
3a299c65 | 775 | const Double_t kConeThickness = 10.0*fgkmm; // Rohacell + Carb.Fib. |
7d6c23de | 776 | const Double_t kConeTheta = 45.0*fgkDegree; // SDD cone angle |
777 | const Double_t kSinConeTheta = | |
778 | TMath::Sin(kConeTheta*TMath::DegToRad()); | |
779 | const Double_t kCosConeTheta = | |
780 | TMath::Cos(kConeTheta*TMath::DegToRad()); | |
781 | const Double_t kTanConeTheta = | |
782 | TMath::Tan(kConeTheta*TMath::DegToRad()); | |
783 | // Dimensions of the Cone Inserts | |
784 | const Double_t kConeCFThickness = 1.5*fgkmm; // Carbon fiber thickness | |
785 | // Dimensions of the Cone Holes | |
786 | const Double_t kHole1RMin = (450.0/2)*fgkmm; | |
3a299c65 | 787 | const Double_t kHole1RMax = (530.0/2)*fgkmm; |
7d6c23de | 788 | const Double_t kHole2RMin = (280.0/2)*fgkmm; |
789 | const Double_t kHole2RMax = (375.0/2)*fgkmm; | |
790 | const Double_t kHole1Phi = 25.0*fgkDegree; | |
791 | const Double_t kHole2Phi = 50.0*fgkDegree; | |
792 | const Double_t kHole3RMin = 205.0*fgkmm; | |
793 | const Double_t kHole3DeltaR = 15*fgkmm; | |
794 | const Double_t kHole3Width = 30*fgkmm; | |
795 | const Int_t kNHole3 = 6 ; | |
796 | const Double_t kHole4RMin = 116.0*fgkmm; | |
797 | const Double_t kHole4DeltaR = 15*fgkmm; | |
3a299c65 | 798 | const Double_t kHole4Width = 30*fgkmm; |
799 | // const Int_t kNHole4 = 3 ; | |
7d6c23de | 800 | |
801 | // Local variables | |
802 | Double_t x, y, z, t, dza, rmin, rmax; | |
803 | ||
804 | ||
7d6c23de | 805 | // Recover the needed materials |
806 | TGeoMedium *medSDDcf = mgr->GetMedium("ITS_SDD C (M55J)$"); | |
807 | TGeoMedium *medSDDair = mgr->GetMedium("ITS_SDD AIR$"); | |
808 | TGeoMedium *medSDDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite | |
809 | TGeoMedium *medSDDroh = mgr->GetMedium("ITS_ROHACELL$"); | |
810 | TGeoMedium *medSDDss = mgr->GetMedium("ITS_INOX$"); | |
811 | ||
812 | // First define the geometrical shapes | |
813 | ||
814 | // Central cylinder with its internal foam and the lateral flanges: | |
815 | // a carbon fiber Tube which contains a rohacell Tube and two | |
816 | // stesalite Tube's | |
817 | TGeoTube *cylindershape = new TGeoTube(kCylinderInnerR,kCylinderOuterR, | |
818 | kCylinderHalfLength); | |
819 | ||
820 | TGeoTube *insertoshape = new TGeoTube(kFlangeInnerR,kFlangeOuterR, | |
821 | kInsertoHalfLength); | |
822 | ||
823 | TGeoTube *flangeshape = new TGeoTube(kFlangeInnerR,kFlangeOuterR, | |
824 | kFlangeHalfLength); | |
825 | ||
826 | // The flange bolt: it is a Tube | |
827 | TGeoTube *boltshape = new TGeoTube(0.0, 0.5*kBoltDiameter, 0.5*kBoltDepth); | |
828 | ||
829 | // Debug if requested | |
830 | if (GetDebug(1)) { | |
831 | cylindershape->InspectShape(); | |
832 | insertoshape->InspectShape(); | |
833 | flangeshape->InspectShape(); | |
834 | boltshape->InspectShape(); | |
835 | } | |
836 | ||
837 | ||
838 | // We have the shapes: now create the real volumes | |
839 | ||
840 | TGeoVolume *cfcylinder = new TGeoVolume("SDDCarbonFiberCylinder", | |
841 | cylindershape,medSDDcf); | |
842 | cfcylinder->SetVisibility(kTRUE); | |
843 | cfcylinder->SetLineColor(4); // Blue | |
844 | cfcylinder->SetLineWidth(1); | |
845 | cfcylinder->SetFillColor(cfcylinder->GetLineColor()); | |
846 | cfcylinder->SetFillStyle(4000); // 0% transparent | |
847 | ||
848 | TGeoVolume *foamcylinder = new TGeoVolume("SDDFoamCylinder", | |
849 | insertoshape,medSDDroh); | |
850 | foamcylinder->SetVisibility(kTRUE); | |
851 | foamcylinder->SetLineColor(3); // Green | |
852 | foamcylinder->SetLineWidth(1); | |
853 | foamcylinder->SetFillColor(foamcylinder->GetLineColor()); | |
854 | foamcylinder->SetFillStyle(4050); // 50% transparent | |
855 | ||
856 | TGeoVolume *flangecylinder = new TGeoVolume("SDDFlangeCylinder", | |
857 | flangeshape,medSDDste); | |
858 | flangecylinder->SetVisibility(kTRUE); | |
859 | flangecylinder->SetLineColor(2); // Red | |
860 | flangecylinder->SetLineWidth(1); | |
861 | flangecylinder->SetFillColor(flangecylinder->GetLineColor()); | |
862 | flangecylinder->SetFillStyle(4050); // 50% transparent | |
863 | ||
864 | TGeoVolume *bolt = new TGeoVolume("SDDFlangeBolt",boltshape,medSDDss); | |
865 | bolt->SetVisibility(kTRUE); | |
866 | bolt->SetLineColor(1); // Black | |
867 | bolt->SetLineWidth(1); | |
868 | bolt->SetFillColor(bolt->GetLineColor()); | |
869 | bolt->SetFillStyle(4050); // 50% transparent | |
870 | ||
871 | // Mount up the cylinder | |
872 | for(Int_t i=0; i<kNBolts; i++){ | |
873 | t = kThetaBolt*i; | |
874 | x = kBoltRadius*TMath::Cos(t); | |
875 | y = kBoltRadius*TMath::Sin(t); | |
876 | z = kFlangeHalfLength-kBoltDepth; | |
877 | flangecylinder->AddNode(bolt, i+1, new TGeoTranslation("",x,y,z)); | |
878 | } | |
879 | ||
880 | cfcylinder->AddNode(foamcylinder,1,0); | |
881 | cfcylinder->AddNode(flangecylinder,1, | |
882 | new TGeoTranslation(0, 0, kInsertoHalfLength+kFlangeHalfLength)); | |
883 | cfcylinder->AddNode(flangecylinder,2,new TGeoCombiTrans( | |
884 | 0, 0, -kInsertoHalfLength-kFlangeHalfLength, | |
885 | new TGeoRotation("",0,180,0) ) ); | |
886 | ||
887 | ||
888 | // SDD Support Cone with its internal inserts: a carbon fiber Pcon | |
889 | // with holes which contains a stesalite Pcon which on turn contains a | |
890 | // rohacell Pcon | |
891 | ||
892 | dza = kConeThickness/kSinConeTheta-(kConeROutMax-kConeROutMin)/kTanConeTheta; | |
893 | ||
894 | TGeoPcon *coneshape = new TGeoPcon(0.0, 360.0, 12); | |
895 | ||
896 | coneshape->Z(0) = 0.0; | |
897 | coneshape->Rmin(0) = kConeROutMin; | |
898 | coneshape->Rmax(0) = kConeROutMax; | |
899 | ||
900 | coneshape->Z(1) = kConeZOuterMilled - dza; | |
901 | coneshape->Rmin(1) = coneshape->GetRmin(0); | |
902 | coneshape->Rmax(1) = coneshape->GetRmax(0); | |
903 | ||
904 | coneshape->Z(2) = kConeZOuterMilled; | |
905 | coneshape->Rmax(2) = coneshape->GetRmax(0); | |
906 | ||
907 | RadiusOfCurvature(kConeRCurv,0.,coneshape->GetZ(1), | |
908 | coneshape->GetRmin(1),kConeTheta,z,rmin); | |
909 | coneshape->Z(3) = z; | |
910 | coneshape->Rmin(3) = rmin; | |
911 | ||
912 | coneshape->Rmin(2) = RminFrom2Points(coneshape,3,1,coneshape->GetZ(2)); | |
913 | ||
914 | RadiusOfCurvature(kConeRCurv,0.,coneshape->GetZ(2), | |
915 | coneshape->GetRmax(2),kConeTheta,z,rmax); | |
916 | coneshape->Z(4) = z; | |
917 | coneshape->Rmax(4) = rmax; | |
918 | coneshape->Rmin(4) = RminFromZpCone(coneshape,3,kConeTheta, | |
919 | coneshape->GetZ(4),0.0); | |
920 | ||
921 | coneshape->Rmax(3) = RmaxFrom2Points(coneshape,4,2,coneshape->GetZ(3)); | |
922 | ||
923 | coneshape->Rmin(7) = kConeRinMin; | |
924 | ||
925 | coneshape->Rmin(8) = kConeRinMin; | |
926 | ||
927 | RadiusOfCurvature(kConeRCurv,90.0,0.0,kConeRinMax,90.0-kConeTheta,z,rmax); | |
928 | coneshape->Rmax(8) = rmax; | |
929 | coneshape->Z(8) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
930 | coneshape->GetRmax(8)); | |
931 | ||
932 | coneshape->Z(9) = kConeZCylinder; | |
933 | coneshape->Rmin(9) = kConeRinMin; | |
934 | ||
935 | coneshape->Z(10) = coneshape->GetZ(9); | |
936 | coneshape->Rmin(10) = kConeRinCylinder; | |
937 | ||
938 | coneshape->Rmin(11) = kConeRinCylinder; | |
939 | coneshape->Rmax(11) = coneshape->GetRmin(11); | |
940 | ||
941 | rmin = coneshape->GetRmin(8); | |
942 | RadiusOfCurvature(kConeRCurv,90.0-kConeTheta, | |
943 | coneshape->GetZ(8),coneshape->GetRmax(8),90.0,z,rmax); | |
944 | rmax = kConeRinMax; | |
945 | coneshape->Z(11) = z + (coneshape->GetZ(8)-z)* | |
946 | (coneshape->GetRmax(11)-rmax)/(coneshape->GetRmax(8)-rmax); | |
947 | ||
948 | coneshape->Rmax(9) = RmaxFrom2Points(coneshape,11,8,coneshape->GetZ(9)); | |
949 | ||
950 | coneshape->Rmax(10) = coneshape->GetRmax(9); | |
951 | ||
952 | coneshape->Z(6) = z - kConeDZin; | |
953 | coneshape->Z(7) = coneshape->GetZ(6); | |
954 | ||
955 | coneshape->Rmax(6) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
956 | coneshape->GetZ(6)); | |
957 | ||
958 | coneshape->Rmax(7) = coneshape->GetRmax(6); | |
959 | ||
960 | RadiusOfCurvature(kConeRCurv,90., | |
961 | coneshape->GetZ(6),0.0,90.0-kConeTheta,z,rmin); | |
962 | coneshape->Z(5) = z; | |
963 | coneshape->Rmin(5) = RminFromZpCone(coneshape,3,kConeTheta,z); | |
964 | coneshape->Rmax(5) = RmaxFromZpCone(coneshape,4,kConeTheta,z); | |
965 | ||
966 | RadiusOfCurvature(kConeRCurv,90.-kConeTheta, | |
967 | 0.0,coneshape->Rmin(5),90.0,z,rmin); | |
968 | coneshape->Rmin(6) = rmin; | |
969 | ||
970 | // SDD Cone Insert: another Pcon | |
971 | Double_t x0, y0, x1, y1, x2, y2; | |
972 | TGeoPcon *coneinsertshape = new TGeoPcon(0.0, 360.0, 9); | |
973 | ||
974 | coneinsertshape->Z(0) = coneshape->GetZ(0) + kConeCFThickness; | |
975 | coneinsertshape->Rmin(0) = coneshape->GetRmin(0) + kConeCFThickness; | |
976 | coneinsertshape->Rmax(0) = coneshape->GetRmax(0) - kConeCFThickness; | |
977 | ||
978 | x0 = coneshape->GetZ(0); y0 = coneshape->GetRmin(0); | |
979 | x1 = coneshape->GetZ(1); y1 = coneshape->GetRmin(1); | |
980 | x2 = coneshape->GetZ(2); y2 = coneshape->GetRmin(2); | |
981 | InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin); | |
982 | coneinsertshape->Z(1) = z; | |
983 | coneinsertshape->Rmin(1) = rmin; | |
984 | coneinsertshape->Rmax(1) = coneinsertshape->GetRmax(0); | |
985 | ||
986 | x0 = coneshape->GetZ(1); y0 = coneshape->GetRmax(1); | |
987 | x1 = coneshape->GetZ(2); y1 = coneshape->GetRmax(2); | |
988 | x2 = coneshape->GetZ(3); y2 = coneshape->GetRmax(3); | |
989 | InsidePoint(x0, y0, x1, y1, x2, y2, -kConeCFThickness, z, rmax); | |
990 | coneinsertshape->Z(2) = z; | |
991 | coneinsertshape->Rmax(2) = rmax; | |
992 | ||
993 | x0 = coneshape->GetZ(2); y0 = coneshape->GetRmin(2); | |
994 | x1 = coneshape->GetZ(3); y1 = coneshape->GetRmin(3); | |
995 | x2 = coneshape->GetZ(4); y2 = coneshape->GetRmin(4); | |
996 | InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin); | |
997 | coneinsertshape->Z(3) = z; | |
998 | coneinsertshape->Rmin(3) = rmin; | |
999 | ||
1000 | x0 = coneinsertshape->GetZ(1); y0 = coneinsertshape->GetRmin(1); | |
1001 | x1 = coneinsertshape->GetZ(3); y1 = coneinsertshape->GetRmin(3); | |
1002 | coneinsertshape->Rmin(2) = Yfrom2Points(x0, y0, x1, y1, | |
1003 | coneinsertshape->Z(2)); | |
1004 | ||
1005 | x0 = coneshape->GetZ(3); y0 = coneshape->GetRmax(3); | |
1006 | x1 = coneshape->GetZ(4); y1 = coneshape->GetRmax(4); | |
1007 | x2 = coneshape->GetZ(5); y2 = coneshape->GetRmax(5); | |
1008 | InsidePoint(x0, y0, x1, y1, x2, y2, -kConeCFThickness, z, rmax); | |
1009 | coneinsertshape->Z(4) = z; | |
1010 | coneinsertshape->Rmax(4) = rmax; | |
1011 | ||
1012 | x0 = coneinsertshape->GetZ(2); y0 = coneinsertshape->GetRmax(2); | |
1013 | x1 = coneinsertshape->GetZ(4); y1 = coneinsertshape->GetRmax(4); | |
1014 | coneinsertshape->Rmax(3) = Yfrom2Points(x0, y0, x1, y1, | |
1015 | coneinsertshape->Z(3)); | |
1016 | ||
1017 | x0 = coneshape->GetZ(4); y0 = coneshape->GetRmin(4); | |
1018 | x1 = coneshape->GetZ(5); y1 = coneshape->GetRmin(5); | |
1019 | x2 = coneshape->GetZ(6); y2 = coneshape->GetRmin(6); | |
1020 | InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin); | |
1021 | coneinsertshape->Z(5) = z; | |
1022 | coneinsertshape->Rmin(5) = rmin; | |
1023 | coneinsertshape->Rmax(5) = coneinsertshape->GetRmax(4) - | |
1024 | kTanConeTheta*(coneinsertshape->GetZ(5) - coneinsertshape->GetZ(4)); | |
1025 | ||
1026 | x0 = coneinsertshape->GetZ(3); y0 = coneinsertshape->GetRmin(3); | |
1027 | x1 = coneinsertshape->GetZ(5); y1 = coneinsertshape->GetRmin(5); | |
1028 | coneinsertshape->Rmin(4) = Yfrom2Points(x0, y0, x1, y1, | |
1029 | coneinsertshape->Z(4)); | |
1030 | ||
1031 | x0 = coneshape->GetZ(5); y0 = coneshape->GetRmin(5); | |
1032 | x1 = coneshape->GetZ(6); y1 = coneshape->GetRmin(6); | |
1033 | x2 = coneshape->GetZ(7); y2 = coneshape->GetRmin(7); | |
1034 | InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin); | |
1035 | coneinsertshape->Z(6) = z; | |
1036 | coneinsertshape->Rmin(6) = rmin; | |
1037 | coneinsertshape->Rmax(6) = coneinsertshape->GetRmax(4) - | |
1038 | kTanConeTheta*(coneinsertshape->GetZ(6) - coneinsertshape->GetZ(4)); | |
1039 | ||
1040 | coneinsertshape->Z(7) = coneinsertshape->GetZ(6); | |
1041 | coneinsertshape->Rmin(7) = coneshape->GetRmin(7) + kConeCFThickness; | |
1042 | coneinsertshape->Rmax(7) = coneinsertshape->GetRmax(6); | |
1043 | ||
1044 | coneinsertshape->Z(8) = coneshape->GetZ(9) - kConeCFThickness; | |
1045 | coneinsertshape->Rmin(8) = coneinsertshape->GetRmin(7); | |
1046 | coneinsertshape->Rmax(8) = coneinsertshape->GetRmax(4) - | |
1047 | kTanConeTheta*(coneinsertshape->GetZ(8) - coneinsertshape->GetZ(4)); | |
1048 | ||
1049 | // SDD Cone Foam: another Pcon | |
1050 | TGeoPcon *conefoamshape = new TGeoPcon(0.0, 360.0, 4); | |
1051 | ||
1052 | RadiusOfCurvature(kConeRCurv+kConeCFThickness,0.0,coneinsertshape->GetZ(1), | |
1053 | coneinsertshape->GetRmin(1),kConeTheta,z,rmin); | |
1054 | ||
1055 | conefoamshape->Z(0) = z; | |
1056 | conefoamshape->Rmin(0) = rmin; | |
1057 | conefoamshape->Rmax(0) = conefoamshape->GetRmin(0); | |
1058 | ||
1059 | conefoamshape->Z(1) = conefoamshape->GetZ(0)+ | |
1060 | (kConeThickness-2.0*kConeCFThickness)/kSinConeTheta; | |
1061 | conefoamshape->Rmin(1) = RminFromZpCone(coneinsertshape,3,kConeTheta, | |
1062 | conefoamshape->GetZ(1)); | |
1063 | conefoamshape->Rmax(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta, | |
1064 | conefoamshape->GetZ(1)); | |
1065 | ||
1066 | conefoamshape->Z(2) = coneshape->GetZ(5)-kConeCFThickness; | |
1067 | conefoamshape->Rmin(2) = RminFromZpCone(coneinsertshape,3,kConeTheta, | |
1068 | conefoamshape->GetZ(2)); | |
1069 | conefoamshape->Rmax(2) = RmaxFromZpCone(coneinsertshape,4,kConeTheta, | |
1070 | conefoamshape->GetZ(2)); | |
1071 | ||
1072 | conefoamshape->Z(3) = coneinsertshape->GetZ(5)+ | |
1073 | (kConeThickness-2.0*kConeCFThickness)*kCosConeTheta; | |
1074 | conefoamshape->Rmax(3) = RmaxFromZpCone(coneinsertshape,4,kConeTheta, | |
1075 | conefoamshape->GetZ(3)); | |
1076 | conefoamshape->Rmin(3) = conefoamshape->GetRmax(3); | |
1077 | ||
1078 | // SDD Cone Holes: Pcon's | |
1079 | TGeoPcon *hole1shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4); | |
1080 | ||
1081 | hole1shape->Rmin(0) = kHole1RMax; | |
1082 | hole1shape->Rmax(0) = hole1shape->GetRmin(0); | |
1083 | hole1shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1084 | hole1shape->GetRmin(0)); | |
1085 | ||
1086 | hole1shape->Rmax(1) = hole1shape->GetRmax(0); | |
1087 | hole1shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1088 | hole1shape->GetRmax(1)); | |
1089 | hole1shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta, | |
1090 | hole1shape->GetZ(1)); | |
1091 | ||
1092 | hole1shape->Rmin(2) = kHole1RMin; | |
1093 | hole1shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1094 | hole1shape->GetRmin(2)); | |
1095 | hole1shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
1096 | hole1shape->GetZ(2)); | |
1097 | ||
1098 | hole1shape->Rmin(3) = hole1shape->GetRmin(2); | |
1099 | hole1shape->Rmax(3) = hole1shape->GetRmin(3); | |
1100 | hole1shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1101 | hole1shape->GetRmax(3)); | |
1102 | ||
1103 | TGeoPcon *hole2shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4); | |
1104 | ||
1105 | hole2shape->Rmin(0) = kHole2RMax; | |
1106 | hole2shape->Rmax(0) = hole2shape->GetRmin(0); | |
1107 | hole2shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1108 | hole2shape->GetRmin(0)); | |
1109 | ||
1110 | hole2shape->Rmax(1) = hole2shape->GetRmax(0); | |
1111 | hole2shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1112 | hole2shape->GetRmax(1)); | |
1113 | hole2shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta, | |
1114 | hole2shape->GetZ(1)); | |
1115 | ||
1116 | hole2shape->Rmin(2) = kHole2RMin; | |
1117 | hole2shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1118 | hole2shape->GetRmin(2)); | |
1119 | hole2shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
1120 | hole2shape->GetZ(2)); | |
1121 | ||
1122 | hole2shape->Rmin(3) = hole2shape->GetRmin(2); | |
1123 | hole2shape->Rmax(3) = hole2shape->GetRmin(3); | |
1124 | hole2shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1125 | hole2shape->GetRmax(3)); | |
1126 | ||
1127 | Double_t holePhi; | |
1128 | holePhi = (kHole3Width/kHole3RMin)*TMath::RadToDeg(); | |
1129 | ||
1130 | TGeoPcon *hole3shape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
1131 | ||
1132 | hole3shape->Rmin(0) = kHole3RMin + kHole3DeltaR; | |
1133 | hole3shape->Rmax(0) = hole3shape->GetRmin(0); | |
1134 | hole3shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1135 | hole3shape->GetRmin(0)); | |
1136 | ||
1137 | hole3shape->Rmax(1) = hole3shape->GetRmax(0); | |
1138 | hole3shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1139 | hole3shape->GetRmax(1)); | |
1140 | hole3shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta, | |
1141 | hole3shape->GetZ(1)); | |
1142 | ||
1143 | hole3shape->Rmin(2) = kHole3RMin; | |
1144 | hole3shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1145 | hole3shape->GetRmin(2)); | |
1146 | hole3shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
1147 | hole3shape->GetZ(2)); | |
1148 | ||
1149 | hole3shape->Rmin(3) = hole3shape->GetRmin(2); | |
1150 | hole3shape->Rmax(3) = hole3shape->GetRmin(3); | |
1151 | hole3shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1152 | hole3shape->GetRmax(3)); | |
1153 | ||
3a299c65 | 1154 | holePhi = (kHole4Width/kHole4RMin)*TMath::RadToDeg(); |
1155 | ||
7d6c23de | 1156 | TGeoPcon *hole4shape = new TGeoPcon(-holePhi/2., holePhi, 4); |
1157 | ||
1158 | hole4shape->Rmin(0) = kHole4RMin + kHole4DeltaR; | |
1159 | hole4shape->Rmax(0) = hole4shape->GetRmin(0); | |
1160 | hole4shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1161 | hole4shape->GetRmin(0)); | |
1162 | ||
1163 | hole4shape->Rmax(1) = hole4shape->GetRmax(0); | |
1164 | hole4shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1165 | hole4shape->GetRmax(1)); | |
1166 | hole4shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta, | |
1167 | hole4shape->GetZ(1)); | |
1168 | ||
1169 | hole4shape->Rmin(2) = kHole4RMin; | |
1170 | hole4shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta, | |
1171 | hole4shape->GetRmin(2)); | |
1172 | hole4shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta, | |
1173 | hole4shape->GetZ(2)); | |
1174 | ||
1175 | hole4shape->Rmin(3) = hole4shape->GetRmin(2); | |
1176 | hole4shape->Rmax(3) = hole4shape->GetRmin(3); | |
1177 | hole4shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta, | |
1178 | hole4shape->GetRmax(3)); | |
1179 | ||
1180 | // Debug if requested | |
1181 | if (GetDebug(1)) { | |
1182 | coneshape->InspectShape(); | |
1183 | coneinsertshape->InspectShape(); | |
1184 | conefoamshape->InspectShape(); | |
1185 | hole1shape->InspectShape(); | |
1186 | hole2shape->InspectShape(); | |
1187 | } | |
1188 | ||
1189 | ||
1190 | // We have the shapes: now create the real volumes | |
1191 | ||
1192 | TGeoVolume *cfcone = new TGeoVolume("SDDCarbonFiberCone", | |
1193 | coneshape,medSDDcf); | |
1194 | cfcone->SetVisibility(kTRUE); | |
1195 | cfcone->SetLineColor(4); // Blue | |
1196 | cfcone->SetLineWidth(1); | |
1197 | cfcone->SetFillColor(cfcone->GetLineColor()); | |
1198 | cfcone->SetFillStyle(4000); // 0% transparent | |
1199 | ||
1200 | TGeoVolume *cfconeinsert = new TGeoVolume("SDDCarbonFiberConeInsert", | |
1201 | coneinsertshape,medSDDste); | |
1202 | cfconeinsert->SetVisibility(kTRUE); | |
1203 | cfconeinsert->SetLineColor(2); // Red | |
1204 | cfconeinsert->SetLineWidth(1); | |
1205 | cfconeinsert->SetFillColor(cfconeinsert->GetLineColor()); | |
1206 | cfconeinsert->SetFillStyle(4050); // 50% transparent | |
1207 | ||
1208 | TGeoVolume *cfconefoam = new TGeoVolume("SDDCarbonFiberConeFoam", | |
1209 | conefoamshape,medSDDroh); | |
1210 | cfconefoam->SetVisibility(kTRUE); | |
1211 | cfconefoam->SetLineColor(7); // Light blue | |
1212 | cfconefoam->SetLineWidth(1); | |
1213 | cfconefoam->SetFillColor(cfconefoam->GetLineColor()); | |
1214 | cfconefoam->SetFillStyle(4050); // 50% transparent | |
1215 | ||
1216 | TGeoVolume *hole1 = new TGeoVolume("SDDCableHole1", | |
1217 | hole1shape,medSDDair); | |
1218 | hole1->SetVisibility(kTRUE); | |
1219 | hole1->SetLineColor(5); // Yellow | |
1220 | hole1->SetLineWidth(1); | |
1221 | hole1->SetFillColor(hole1->GetLineColor()); | |
1222 | hole1->SetFillStyle(4090); // 90% transparent | |
1223 | ||
1224 | TGeoVolume *hole2 = new TGeoVolume("SDDCableHole2", | |
1225 | hole2shape,medSDDair); | |
1226 | hole2->SetVisibility(kTRUE); | |
1227 | hole2->SetLineColor(5); // Yellow | |
1228 | hole2->SetLineWidth(1); | |
1229 | hole2->SetFillColor(hole2->GetLineColor()); | |
1230 | hole2->SetFillStyle(4090); // 90% transparent | |
1231 | ||
1232 | TGeoVolume *hole3 = new TGeoVolume("SDDCableHole3", | |
1233 | hole3shape,medSDDair); | |
1234 | hole3->SetVisibility(kTRUE); | |
1235 | hole3->SetLineColor(5); // Yellow | |
1236 | hole3->SetLineWidth(1); | |
1237 | hole3->SetFillColor(hole3->GetLineColor()); | |
1238 | hole3->SetFillStyle(4090); // 90% transparent | |
1239 | ||
1240 | TGeoVolume *hole4 = new TGeoVolume("SDDCableHole4", | |
1241 | hole4shape,medSDDair); | |
1242 | hole4->SetVisibility(kTRUE); | |
1243 | hole4->SetLineColor(5); // Yellow | |
1244 | hole4->SetLineWidth(1); | |
1245 | hole4->SetFillColor(hole4->GetLineColor()); | |
1246 | hole4->SetFillStyle(4090); // 90% transparent | |
1247 | ||
1248 | // Mount up a cone | |
1249 | cfconeinsert->AddNode(cfconefoam,1,0); | |
1250 | ||
1251 | cfcone->AddNode(cfconeinsert,1,0); | |
1252 | ||
1253 | for (Int_t i=0; i<12; i++) { | |
1254 | Double_t phiH = i*30.0; | |
1255 | cfcone->AddNode(hole1, i+1, new TGeoRotation("", 0, 0, phiH)); | |
1256 | } | |
1257 | ||
1258 | for (Int_t i=0; i<6; i++) { | |
1259 | Double_t phiH = i*60.0; | |
1260 | cfcone->AddNode(hole2, i+1, new TGeoRotation("", 0, 0, phiH)); | |
1261 | } | |
1262 | ||
1263 | for (Int_t i=0; i<kNHole3; i++) { | |
1264 | Double_t phiH0 = 360./(Double_t)kNHole3; | |
1265 | Double_t phiH = i*phiH0 + 0.5*phiH0; | |
1266 | cfcone->AddNode(hole3, i+1, new TGeoRotation("", phiH, 0, 0)); | |
1267 | } | |
1268 | /* | |
1269 | for (Int_t i=0; i<kNHole4; i++) { | |
1270 | Double_t phiH0 = 360./(Double_t)kNHole4; | |
1271 | Double_t phiH = i*phiH0 + 0.25*phiH0; | |
1272 | cfcone->AddNode(hole4, i+1, new TGeoRotation("", phiH, 0, 0)); | |
1273 | } | |
1274 | */ | |
3a299c65 | 1275 | // Finally put everything in the mother volume |
1276 | moth->AddNode(cfcylinder,1,0); | |
7d6c23de | 1277 | |
1278 | z = coneshape->Z(9); | |
3a299c65 | 1279 | moth->AddNode(cfcone,1,new TGeoTranslation(0, 0, -z - kCylinderHalfLength)); |
1280 | moth->AddNode(cfcone,2,new TGeoCombiTrans (0, 0, z + kCylinderHalfLength, | |
1281 | new TGeoRotation("", 0, 180, 0) )); | |
7d6c23de | 1282 | |
7d6c23de | 1283 | |
1284 | return; | |
172b0d90 | 1285 | } |
7d6c23de | 1286 | |
172b0d90 | 1287 | //______________________________________________________________________ |
3a299c65 | 1288 | void AliITSv11GeometrySupport::SSDCone(TGeoVolume *moth,TGeoManager *mgr) |
1289 | { | |
1290 | // | |
1291 | // Creates the SSD support cone and cylinder geometry. as a | |
1292 | // volume assembly and adds it to the mother volume | |
1293 | // (part of this code is taken or anyway inspired to SSDCone method | |
1294 | // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06) | |
1295 | // | |
1296 | // Input: | |
1297 | // moth : the TGeoVolume owing the volume structure | |
1298 | // mgr : the GeoManager (default gGeoManager) | |
1299 | // Output: | |
1300 | // | |
1301 | // Created: ??? Bjorn S. Nilsen | |
1302 | // Updated: 08 Mar 2008 Mario Sitta | |
1303 | // | |
1304 | // Technical data are taken from: "ITS Supporto Generale" (technical | |
1305 | // drawings ALR3-0743/1, ALR3-0743/1A and ALR3-0743/1B), "Supporto Generale | |
1306 | // Settore SSD" (technical drawings ALR3-0743/2A and ALR3-0743/2E), private | |
1307 | // communication with B. Giraudo | |
5e15508a | 1308 | // |
1309 | // Updated: 11 Apr 2008 Mario Sitta | |
1310 | // Measures from drawings give overlaps with SPD thermal shield wings, | |
1311 | // so the terminal part of the SSD cone was reduced | |
3a299c65 | 1312 | |
1313 | // Dimensions of the Central cylinder and flanges | |
1314 | const Double_t kCylinderHalfLength = (1144.0/2) *fgkmm; | |
1315 | const Double_t kCylinderOuterRadius = ( 595.0/2) *fgkmm; | |
1316 | const Double_t kCylinderThickness = 0.6 *fgkmm; | |
1317 | const Double_t kFoamHalfLength = (1020.0/2) *fgkmm; | |
1318 | const Double_t kFoamThickness = 5.0 *fgkmm; | |
1319 | const Double_t kFlangeHalfLength = | |
1320 | (kCylinderHalfLength-kFoamHalfLength)/2.; | |
1321 | const Double_t kFlangeInnerRadius = ( 563.0/2) *fgkmm; | |
1322 | // Dimensions of the Cone | |
fd5b6398 | 1323 | const Double_t kConeROuterMin = ( 957.0/2) *fgkmm; |
1324 | const Double_t kConeROuterMax = ( 997.0/2) *fgkmm; | |
3a299c65 | 1325 | const Double_t kConeRInnerMin = ( 564.0/2) *fgkmm; |
1326 | const Double_t kConeRCurv1 = 10.0 *fgkmm; | |
1327 | const Double_t kConeRCurv2 = 25.0 *fgkmm; | |
1328 | const Double_t kConeCent1RCurv2 = ( 578.0/2) *fgkmm; | |
1329 | const Double_t kConeCent2RCurv2 = ( 593.0/2) *fgkmm; | |
5e15508a | 1330 | // const Double_t kConeZOuterRing = 47.0 *fgkmm; |
1331 | // const Double_t kConeZOuterRingInside = 30.25*fgkmm; | |
1332 | // const Double_t kConeZInnerRing = 161.5 *fgkmm; | |
1333 | // const Double_t kConeZLength = 176.5 *fgkmm; | |
1334 | const Double_t kConeZOuterRing = 38.5 *fgkmm; | |
1335 | const Double_t kConeZOuterRingInside = 22.2 *fgkmm; | |
1336 | const Double_t kConeZInnerRing = 153.0 *fgkmm; | |
1337 | const Double_t kConeZLength = 168.0 *fgkmm; | |
3a299c65 | 1338 | const Double_t kConeZPosition = kConeZLength + kCylinderHalfLength; |
1339 | const Double_t kConeThickness = 13.0 *fgkmm; // Cone thickness | |
1340 | const Double_t kConeTheta = 39.0 *fgkDegree; // Cone angle | |
1341 | const Double_t kSinConeTheta = | |
1342 | TMath::Sin(kConeTheta*TMath::DegToRad()); | |
1343 | const Double_t kCosConeTheta = | |
1344 | TMath::Cos(kConeTheta*TMath::DegToRad()); | |
1345 | // Dimensions of the Foam cores | |
1346 | const Double_t kConeFoam1Length = 112.3 *fgkmm; | |
1347 | const Double_t kConeFoam2Length = 58.4 *fgkmm; | |
1348 | // Dimensions of the Cone Holes | |
1349 | const Double_t kCoolingHoleWidth = 40.0 *fgkmm; | |
1350 | const Double_t kCoolingHoleHight = 30.0 *fgkmm; | |
1351 | const Double_t kCoolingHoleRmin = 350.0 *fgkmm; | |
1352 | const Double_t kCoolingHolePhi = 45.0 *fgkDegree; | |
1353 | const Double_t kMountingHoleWidth = 20.0 *fgkmm; | |
1354 | const Double_t kMountingHoleHight = 20.0 *fgkmm; | |
1355 | const Double_t kMountingHoleRmin = 317.5 *fgkmm; | |
1356 | const Double_t kMountingHolePhi = 60.0 *fgkDegree; | |
1357 | const Double_t kCableHoleRin = ( 800.0/2) *fgkmm; | |
1358 | const Double_t kCableHoleRout = ( 920.0/2) *fgkmm; | |
1359 | const Double_t kCableHoleWidth = 200.0 *fgkmm; | |
1360 | // const Double_t kCableHoleAngle = 42.0 *fgkDegree; | |
1361 | // Dimensions of the Cone Wings | |
1362 | const Double_t kWingRmax = 527.5 *fgkmm; | |
1363 | const Double_t kWingWidth = 70.0 *fgkmm; | |
1364 | const Double_t kWingHalfThick = ( 10.0/2) *fgkmm; | |
1365 | const Double_t kThetaWing = 45.0 *fgkDegree; | |
1366 | // Dimensions of the SSD-SDD Mounting Brackets | |
1367 | const Double_t kBracketRmin = ( 540.0/2) *fgkmm;// See SDD ROutMin | |
1368 | const Double_t kBracketRmax = ( 585.0/2) *fgkmm; | |
1369 | const Double_t kBracketHalfLength = ( 4.0/2) *fgkmm; | |
1370 | const Double_t kBracketPhi = (70.*fgkmm/kBracketRmax)*fgkRadian; | |
1371 | // Common data | |
1372 | const Double_t kCFThickness = 0.75*fgkmm; //Carb. fib. thick. | |
1373 | ||
1374 | ||
1375 | // Local variables | |
1376 | Double_t rmin1, rmin2, rmax, z; | |
1377 | ||
1378 | // | |
1379 | //Begin_Html | |
1380 | /* | |
1381 | <img src="picts/ITS/file_name.gif"> | |
1382 | <P> | |
1383 | <FONT FACE'"TIMES"> | |
1384 | ITS SSD central support and thermal shield cylinder. | |
1385 | </FONT> | |
1386 | </P> | |
1387 | */ | |
1388 | //End_Html | |
1389 | // | |
1390 | ||
1391 | // Central cylinder with its internal foam and the lateral flanges: | |
1392 | // a carbon fiber Pcon which contains a rohacell Tube and two | |
1393 | // stesalite Cone's | |
1394 | TGeoPcon *externalcylshape = new TGeoPcon(0,360,4); | |
1395 | ||
1396 | rmax = kCylinderOuterRadius; | |
1397 | rmin1 = kFlangeInnerRadius - kCylinderThickness; | |
1398 | rmin2 = rmax - 2*kCylinderThickness - kFoamThickness; | |
1399 | externalcylshape->DefineSection(0,-kCylinderHalfLength,rmin1,rmax); | |
1400 | externalcylshape->DefineSection(1,-kFoamHalfLength ,rmin2,rmax); | |
1401 | externalcylshape->DefineSection(2, kFoamHalfLength ,rmin2,rmax); | |
1402 | externalcylshape->DefineSection(3, kCylinderHalfLength,rmin1,rmax); | |
1403 | ||
1404 | rmax = kCylinderOuterRadius - kCylinderThickness; | |
1405 | rmin1 = rmax - kFoamThickness; | |
1406 | TGeoTube *foamshape = new TGeoTube(rmin1,rmax,kFoamHalfLength); | |
1407 | ||
1408 | rmax = kCylinderOuterRadius - kCylinderThickness; | |
1409 | rmin1 = rmax - kFoamThickness; | |
1410 | rmin2 = kFlangeInnerRadius; | |
1411 | TGeoCone *flangeshape = new TGeoCone(kFlangeHalfLength, | |
1412 | rmin1,rmax,rmin2,rmax); | |
1413 | ||
1414 | ||
1415 | // We have the shapes: now create the real volumes | |
1416 | ||
1417 | TGeoMedium *medSSDcf = mgr->GetMedium("ITS_SSD C (M55J)$"); | |
1418 | TGeoMedium *medSSDair = mgr->GetMedium("ITS_SSD AIR$"); | |
1419 | TGeoMedium *medSSDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite | |
1420 | TGeoMedium *medSSDroh = mgr->GetMedium("ITS_ROHACELL$"); | |
1421 | TGeoMedium *medSSDal = mgr->GetMedium("ITS_ALUMINUM$"); | |
1422 | ||
1423 | TGeoVolume *cfcylinder = new TGeoVolume("SSDexternalcylinder", | |
1424 | externalcylshape,medSSDcf); | |
1425 | cfcylinder->SetVisibility(kTRUE); | |
1426 | cfcylinder->SetLineColor(4); // blue | |
1427 | cfcylinder->SetLineWidth(1); | |
1428 | cfcylinder->SetFillColor(cfcylinder->GetLineColor()); | |
1429 | cfcylinder->SetFillStyle(4000); // 0% transparent | |
1430 | ||
1431 | TGeoVolume *foamcylinder = new TGeoVolume("SSDfoamcylinder", | |
1432 | foamshape,medSSDroh); | |
1433 | foamcylinder->SetVisibility(kTRUE); | |
1434 | foamcylinder->SetLineColor(3); // green | |
1435 | foamcylinder->SetLineWidth(1); | |
1436 | foamcylinder->SetFillColor(foamcylinder->GetLineColor()); | |
1437 | foamcylinder->SetFillStyle(4050); // 50% transparent | |
1438 | ||
1439 | TGeoVolume *flangecylinder = new TGeoVolume("SSDflangecylinder", | |
1440 | flangeshape,medSSDste); | |
1441 | flangecylinder->SetVisibility(kTRUE); | |
1442 | flangecylinder->SetLineColor(2); // red | |
1443 | flangecylinder->SetLineWidth(1); | |
1444 | flangecylinder->SetFillColor(flangecylinder->GetLineColor()); | |
1445 | flangecylinder->SetFillStyle(4050); // 50% transparent | |
1446 | ||
1447 | // Mount up the cylinder | |
1448 | cfcylinder->AddNode(foamcylinder,1,0); | |
1449 | cfcylinder->AddNode(flangecylinder,1, | |
1450 | new TGeoTranslation(0, 0, kFoamHalfLength+kFlangeHalfLength)); | |
1451 | cfcylinder->AddNode(flangecylinder,2,new TGeoCombiTrans( | |
1452 | 0, 0, -kFoamHalfLength-kFlangeHalfLength, | |
1453 | new TGeoRotation("",0,180,0) ) ); | |
1454 | ||
1455 | ||
1456 | // The whole Cone as an assembly | |
1457 | TGeoVolumeAssembly *vC = new TGeoVolumeAssembly("ITSssdCone"); | |
1458 | ||
1459 | ||
1460 | // SSD Support Cone with its internal inserts: a carbon fiber Pcon | |
1461 | // with holes which contains a stesalite Pcon which on turn contains a | |
1462 | // rohacell Pcon | |
1463 | TGeoPcon *coneshape = new TGeoPcon(0.0, 360.0, 12); | |
1464 | ||
1465 | coneshape->Z(0) = 0.0; | |
1466 | coneshape->Rmin(0) = kConeROuterMin; | |
1467 | coneshape->Rmax(0) = kConeROuterMax; | |
1468 | ||
1469 | coneshape->Z(1) = kConeZOuterRingInside - kConeRCurv1; | |
1470 | coneshape->Rmin(1) = coneshape->GetRmin(0); | |
1471 | coneshape->Rmax(1) = coneshape->GetRmax(0); | |
1472 | ||
1473 | coneshape->Z(2) = kConeZOuterRingInside; | |
1474 | coneshape->Rmin(2) = coneshape->GetRmin(1) - kConeRCurv1; | |
1475 | coneshape->Rmax(2) = coneshape->GetRmax(0); | |
1476 | ||
1477 | coneshape->Z(3) = coneshape->GetZ(2); | |
1478 | coneshape->Rmax(3) = coneshape->GetRmax(0); | |
1479 | ||
1480 | coneshape->Z(4) = kConeZOuterRing - kConeRCurv1; | |
1481 | coneshape->Rmax(4) = coneshape->GetRmax(0); | |
1482 | ||
1483 | coneshape->Z(5) = kConeZOuterRing; | |
1484 | coneshape->Rmax(5) = coneshape->GetRmax(4) - kConeRCurv1; | |
1485 | ||
1486 | coneshape->Z(6) = coneshape->GetZ(5); | |
1487 | ||
1488 | RadiusOfCurvature(kConeRCurv2,90.0,kConeZInnerRing,kConeCent1RCurv2, | |
1489 | 90.0-kConeTheta,z,rmin1); | |
1490 | coneshape->Z(7) = z; | |
1491 | coneshape->Rmin(7) = rmin1; | |
1492 | ||
1493 | coneshape->Rmin(3) = RminFromZpCone(coneshape,7,90.-kConeTheta, | |
1494 | coneshape->GetZ(3)); | |
1495 | ||
1496 | coneshape->Rmin(4) = RminFrom2Points(coneshape,3,7,coneshape->GetZ(4)); | |
1497 | ||
1498 | coneshape->Rmin(5) = RminFrom2Points(coneshape,3,7,coneshape->GetZ(5)); | |
1499 | ||
1500 | coneshape->Rmin(6) = coneshape->GetRmin(5); | |
1501 | ||
1502 | coneshape->Z(8) = kConeZInnerRing; | |
1503 | coneshape->Rmin(8) = kConeCent1RCurv2; | |
1504 | ||
1505 | coneshape->Z(9) = coneshape->GetZ(8); | |
1506 | coneshape->Rmin(9) = kConeRInnerMin; | |
1507 | ||
1508 | RadiusOfCurvature(kConeRCurv2,90.0,kConeZLength,kConeCent2RCurv2, | |
1509 | 90.0-kConeTheta,z,rmax); | |
1510 | ||
1511 | coneshape->Z(10) = z; | |
1512 | coneshape->Rmin(10) = coneshape->GetRmin(9); | |
1513 | coneshape->Rmax(10) = rmax; | |
1514 | ||
1515 | coneshape->Rmax(6) = RmaxFromZpCone(coneshape,10,90.-kConeTheta, | |
1516 | coneshape->GetZ(6)); | |
1517 | ||
1518 | coneshape->Rmax(7) = RmaxFrom2Points(coneshape,6,10,coneshape->GetZ(7)); | |
1519 | ||
1520 | coneshape->Rmax(8) = RmaxFrom2Points(coneshape,6,10,coneshape->GetZ(8)); | |
1521 | ||
1522 | coneshape->Rmax(9) = coneshape->GetRmax(8); | |
1523 | ||
1524 | coneshape->Z(11) = kConeZLength; | |
1525 | coneshape->Rmin(11) = coneshape->GetRmin(10); | |
1526 | coneshape->Rmax(11) = kConeCent2RCurv2; | |
1527 | ||
1528 | // SSD Cone Insert: another Pcon | |
1529 | Double_t x0, y0, x1, y1, x2, y2; | |
1530 | TGeoPcon *coneinsertshape = new TGeoPcon(0.0,360.0,12); | |
1531 | ||
1532 | coneinsertshape->Z(0) = coneshape->GetZ(0) + kCFThickness; | |
1533 | coneinsertshape->Rmin(0) = coneshape->GetRmin(0) + kCFThickness; | |
1534 | coneinsertshape->Rmax(0) = coneshape->GetRmax(0) - kCFThickness; | |
1535 | ||
1536 | x0 = coneshape->GetZ(0); y0 = coneshape->GetRmin(0); | |
1537 | x1 = coneshape->GetZ(1); y1 = coneshape->GetRmin(1); | |
1538 | x2 = coneshape->GetZ(2); y2 = coneshape->GetRmin(2); | |
1539 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
1540 | coneinsertshape->Z(1) = z; | |
1541 | coneinsertshape->Rmin(1) = rmin1; | |
1542 | coneinsertshape->Rmax(1) = coneinsertshape->GetRmax(0); | |
1543 | ||
1544 | x0 = coneshape->GetZ(1); y0 = coneshape->GetRmin(1); | |
1545 | x1 = coneshape->GetZ(2); y1 = coneshape->GetRmin(2); | |
1546 | x2 = coneshape->GetZ(3); y2 = coneshape->GetRmin(3); | |
1547 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
1548 | coneinsertshape->Z(2) = z; | |
1549 | coneinsertshape->Rmin(2) = rmin1; | |
1550 | coneinsertshape->Rmax(2) = coneinsertshape->GetRmax(1); | |
1551 | ||
1552 | x0 = coneshape->GetZ(2); y0 = coneshape->GetRmin(2); | |
1553 | x1 = coneshape->GetZ(3); y1 = coneshape->GetRmin(3); | |
1554 | x2 = coneshape->GetZ(4); y2 = coneshape->GetRmin(4); | |
1555 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
1556 | coneinsertshape->Z(3) = z; | |
1557 | coneinsertshape->Rmin(3) = rmin1; | |
1558 | coneinsertshape->Rmax(3) = coneinsertshape->GetRmax(2); | |
1559 | ||
1560 | x0 = coneshape->GetZ(3); y0 = coneshape->GetRmax(3); | |
1561 | x1 = coneshape->GetZ(4); y1 = coneshape->GetRmax(4); | |
1562 | x2 = coneshape->GetZ(5); y2 = coneshape->GetRmax(5); | |
1563 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
1564 | coneinsertshape->Z(4) = z; | |
1565 | coneinsertshape->Rmax(4) = rmax; | |
1566 | ||
1567 | x0 = coneshape->GetZ(4); y0 = coneshape->GetRmax(4); | |
1568 | x1 = coneshape->GetZ(5); y1 = coneshape->GetRmax(5); | |
1569 | x2 = coneshape->GetZ(6); y2 = coneshape->GetRmax(6); | |
1570 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
1571 | coneinsertshape->Z(5) = z; | |
1572 | coneinsertshape->Rmax(5) = rmax; | |
1573 | ||
1574 | x0 = coneshape->GetZ(5); y0 = coneshape->GetRmax(5); | |
1575 | x1 = coneshape->GetZ(6); y1 = coneshape->GetRmax(6); | |
1576 | x2 = coneshape->GetZ(7); y2 = coneshape->GetRmax(7); | |
1577 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
1578 | coneinsertshape->Z(6) = z; | |
1579 | coneinsertshape->Rmax(6) = rmax; | |
1580 | ||
1581 | x0 = coneshape->GetZ(6); y0 = coneshape->GetRmin(6); | |
1582 | x1 = coneshape->GetZ(7); y1 = coneshape->GetRmin(7); | |
1583 | x2 = coneshape->GetZ(8); y2 = coneshape->GetRmin(8); | |
1584 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
1585 | coneinsertshape->Z(7) = z; | |
1586 | coneinsertshape->Rmin(7) = rmin1; | |
1587 | ||
1588 | coneinsertshape->Rmin(4) = RminFrom2Points(coneinsertshape,3,7, | |
1589 | coneinsertshape->GetZ(4)); | |
1590 | ||
1591 | coneinsertshape->Rmin(5) = RminFrom2Points(coneinsertshape,3,7, | |
1592 | coneinsertshape->GetZ(5)); | |
1593 | ||
1594 | coneinsertshape->Rmin(6) = coneinsertshape->GetRmin(5); | |
1595 | ||
1596 | x0 = coneshape->GetZ(7); y0 = coneshape->GetRmin(7); | |
1597 | x1 = coneshape->GetZ(8); y1 = coneshape->GetRmin(8); | |
1598 | x2 = coneshape->GetZ(9); y2 = coneshape->GetRmin(9); | |
1599 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
1600 | coneinsertshape->Z(8) = z; | |
1601 | coneinsertshape->Rmin(8) = rmin1; | |
1602 | ||
1603 | x0 = coneshape->GetZ( 8); y0 = coneshape->GetRmin( 8); | |
1604 | x1 = coneshape->GetZ( 9); y1 = coneshape->GetRmin( 9); | |
1605 | x2 = coneshape->GetZ(10); y2 = coneshape->GetRmin(10); | |
1606 | InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1); | |
1607 | coneinsertshape->Z(9) = z; | |
1608 | coneinsertshape->Rmin(9) = rmin1; | |
1609 | ||
1610 | x0 = coneshape->GetZ( 9); y0 = coneshape->GetRmax( 9); | |
1611 | x1 = coneshape->GetZ(10); y1 = coneshape->GetRmax(10); | |
1612 | x2 = coneshape->GetZ(11); y2 = coneshape->GetRmax(11); | |
1613 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
1614 | coneinsertshape->Z(10) = z; | |
1615 | coneinsertshape->Rmax(10) = rmax; | |
1616 | coneinsertshape->Rmin(10) = coneinsertshape->GetRmin(9); | |
1617 | ||
1618 | coneinsertshape->Rmax(7) = RmaxFrom2Points(coneinsertshape,6,10, | |
1619 | coneinsertshape->GetZ(7)); | |
1620 | ||
1621 | coneinsertshape->Rmax(8) = RmaxFrom2Points(coneinsertshape,6,10, | |
1622 | coneinsertshape->GetZ(8)); | |
1623 | ||
1624 | coneinsertshape->Rmax(9) = coneinsertshape->GetRmax(8); | |
1625 | ||
1626 | x0 = coneshape->GetZ(10); y0 = coneshape->GetRmax(10); | |
1627 | x1 = coneshape->GetZ(11); y1 = coneshape->GetRmax(11); | |
1628 | x2 = coneshape->GetZ(11); y2 = coneshape->GetRmin(11); | |
1629 | InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax); | |
1630 | coneinsertshape->Z(11) = z; | |
1631 | coneinsertshape->Rmax(11) = rmax; | |
1632 | coneinsertshape->Rmin(11) = coneinsertshape->GetRmin(10); | |
1633 | ||
1634 | // SSD Cone Foams: two other Pcon's | |
1635 | TGeoPcon *conefoam1shape = new TGeoPcon(0.0, 360.0, 4); | |
1636 | ||
1637 | conefoam1shape->Z(0) = coneinsertshape->GetZ(3); | |
1638 | conefoam1shape->Rmin(0) = coneinsertshape->GetRmin(3); | |
1639 | conefoam1shape->Rmax(0) = conefoam1shape->GetRmin(0); | |
1640 | ||
1641 | conefoam1shape->Rmax(1) = conefoam1shape->GetRmax(0); | |
1642 | conefoam1shape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
1643 | conefoam1shape->GetRmax(1)); | |
1644 | conefoam1shape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta, | |
1645 | conefoam1shape->GetZ(1)); | |
1646 | ||
1647 | Double_t t = kConeThickness - 2*kCFThickness; | |
1648 | conefoam1shape->Rmin(2) = conefoam1shape->GetRmax(0) - | |
1649 | (kConeFoam1Length*kCosConeTheta - t*kSinConeTheta); | |
1650 | conefoam1shape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
1651 | conefoam1shape->GetRmin(2)); | |
1652 | conefoam1shape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta, | |
1653 | conefoam1shape->GetZ(2)); | |
1654 | ||
1655 | conefoam1shape->Rmin(3) = conefoam1shape->GetRmin(2); | |
1656 | conefoam1shape->Rmax(3) = conefoam1shape->GetRmin(3); | |
1657 | conefoam1shape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
1658 | conefoam1shape->GetRmax(3)); | |
1659 | ||
1660 | TGeoPcon *conefoam2shape = new TGeoPcon(0.0, 360.0, 4); | |
1661 | ||
1662 | conefoam2shape->Z(3) = coneinsertshape->GetZ(10); | |
1663 | conefoam2shape->Rmin(3) = coneinsertshape->GetRmax(10); | |
1664 | conefoam2shape->Rmax(3) = conefoam2shape->GetRmin(3); | |
1665 | ||
1666 | conefoam2shape->Rmin(2) = conefoam2shape->GetRmin(3); | |
1667 | conefoam2shape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
1668 | conefoam2shape->GetRmin(2)); | |
1669 | conefoam2shape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta, | |
1670 | conefoam2shape->GetZ(2)); | |
1671 | ||
1672 | conefoam2shape->Rmin(0) = conefoam2shape->GetRmax(2) + | |
1673 | (kConeFoam2Length*kCosConeTheta - t*kSinConeTheta); | |
1674 | conefoam2shape->Rmax(0) = conefoam2shape->GetRmin(0); | |
1675 | conefoam2shape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
1676 | conefoam2shape->GetRmin(0)); | |
1677 | ||
1678 | conefoam2shape->Rmax(1) = conefoam2shape->GetRmax(0); | |
1679 | conefoam2shape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
1680 | conefoam2shape->GetRmax(1)); | |
1681 | conefoam2shape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta, | |
1682 | conefoam2shape->GetZ(1)); | |
1683 | ||
1684 | // SSD Cone Holes: Pcon's | |
1685 | Double_t holePhi; | |
1686 | holePhi = (kCoolingHoleWidth/kCoolingHoleRmin)*TMath::RadToDeg(); | |
1687 | ||
1688 | TGeoPcon *coolingholeshape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
1689 | ||
1690 | coolingholeshape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight; | |
1691 | coolingholeshape->Rmax(0) = coolingholeshape->GetRmin(0); | |
1692 | coolingholeshape->Z(0) = ZFromRminpCone(coneshape,3,90.-kConeTheta, | |
1693 | coolingholeshape->GetRmin(0)); | |
1694 | ||
1695 | coolingholeshape->Rmax(1) = coolingholeshape->GetRmax(0); | |
1696 | coolingholeshape->Z(1) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta, | |
1697 | coolingholeshape->GetRmax(1)); | |
1698 | coolingholeshape->Rmin(1) = RminFromZpCone(coneshape,3,90.-kConeTheta, | |
1699 | coolingholeshape->GetZ(1)); | |
1700 | ||
1701 | coolingholeshape->Rmin(2) = kCoolingHoleRmin; | |
1702 | coolingholeshape->Z(2) = ZFromRminpCone(coneshape,3,90.-kConeTheta, | |
1703 | coolingholeshape->GetRmin(2)); | |
1704 | coolingholeshape->Rmax(2) = RmaxFromZpCone(coneshape,7,90.-kConeTheta, | |
1705 | coolingholeshape->GetZ(2)); | |
1706 | ||
1707 | coolingholeshape->Rmin(3) = coolingholeshape->GetRmin(2); | |
1708 | coolingholeshape->Rmax(3) = coolingholeshape->GetRmin(3); | |
1709 | coolingholeshape->Z(3) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta, | |
1710 | coolingholeshape->GetRmax(3)); | |
1711 | ||
1712 | // This is really weird: a single mountinghole volume gives an overlap | |
1713 | // with coneinsert (why doesn't coolinghole ?), so three contiguous | |
1714 | // volumes are created: one to be put in coneinsert and two in the cone | |
1715 | // carbon fiber envelope | |
1716 | holePhi = (kMountingHoleWidth/kMountingHoleRmin)*TMath::RadToDeg(); | |
1717 | ||
1718 | TGeoPcon *mountingholeshape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
1719 | ||
1720 | mountingholeshape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight; | |
1721 | mountingholeshape->Rmax(0) = mountingholeshape->GetRmin(0); | |
1722 | mountingholeshape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
1723 | mountingholeshape->GetRmin(0)); | |
1724 | ||
1725 | mountingholeshape->Rmin(1) = kMountingHoleRmin; | |
1726 | mountingholeshape->Rmax(1) = mountingholeshape->GetRmax(0); | |
1727 | mountingholeshape->Z(1) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta, | |
1728 | mountingholeshape->GetRmin(1)); | |
1729 | ||
1730 | mountingholeshape->Rmin(2) = mountingholeshape->GetRmin(1); | |
1731 | mountingholeshape->Rmax(2) = mountingholeshape->GetRmax(1); | |
1732 | mountingholeshape->Z(2) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
1733 | mountingholeshape->GetRmax(2)); | |
1734 | ||
1735 | mountingholeshape->Rmin(3) = mountingholeshape->GetRmin(2); | |
1736 | mountingholeshape->Rmax(3) = mountingholeshape->GetRmin(3); | |
1737 | mountingholeshape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta, | |
1738 | mountingholeshape->GetRmax(3)); | |
1739 | ||
1740 | TGeoPcon *mountinghole2shape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
1741 | ||
1742 | mountinghole2shape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight; | |
1743 | mountinghole2shape->Rmax(0) = mountingholeshape->GetRmin(0); | |
1744 | mountinghole2shape->Z(0) = ZFromRminpCone(coneshape,3,90.-kConeTheta, | |
1745 | mountinghole2shape->GetRmin(0)); | |
1746 | ||
1747 | mountinghole2shape->Rmax(1) = mountinghole2shape->GetRmax(0); | |
1748 | mountinghole2shape->Z(1) = mountingholeshape->Z(0); | |
1749 | mountinghole2shape->Rmin(1) = RminFromZpCone(coneshape,3,90.-kConeTheta, | |
1750 | mountinghole2shape->GetZ(1)); | |
1751 | ||
1752 | mountinghole2shape->Rmin(2) = kMountingHoleRmin; | |
1753 | mountinghole2shape->Z(2) = ZFromRminpCone(coneshape,3,90.-kConeTheta, | |
1754 | mountinghole2shape->GetRmin(2)); | |
1755 | mountinghole2shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta, | |
1756 | mountinghole2shape->GetZ(2)); | |
1757 | ||
1758 | mountinghole2shape->Rmin(3) = mountinghole2shape->Rmin(2); | |
1759 | mountinghole2shape->Rmax(3) = mountinghole2shape->Rmin(3); | |
1760 | mountinghole2shape->Z(3) = mountingholeshape->Z(1); | |
1761 | ||
1762 | TGeoPcon *mountinghole3shape = new TGeoPcon(-holePhi/2., holePhi, 4); | |
1763 | ||
1764 | mountinghole3shape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight; | |
1765 | mountinghole3shape->Rmax(0) = mountingholeshape->GetRmin(0); | |
1766 | mountinghole3shape->Z(0) = mountingholeshape->GetZ(2); | |
1767 | ||
1768 | mountinghole3shape->Rmax(1) = mountinghole3shape->GetRmax(0); | |
1769 | mountinghole3shape->Z(1) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta, | |
1770 | mountinghole3shape->GetRmax(1)); | |
1771 | mountinghole3shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta, | |
1772 | mountinghole3shape->GetZ(1)); | |
1773 | ||
1774 | mountinghole3shape->Rmin(2) = kMountingHoleRmin; | |
1775 | mountinghole3shape->Z(2) = mountingholeshape->Z(3); | |
1776 | mountinghole3shape->Rmax(2) = RmaxFromZpCone(coneshape,7,90.-kConeTheta, | |
1777 | mountinghole3shape->GetZ(2)); | |
1778 | ||
1779 | mountinghole3shape->Rmin(3) = mountinghole3shape->Rmin(2); | |
1780 | mountinghole3shape->Rmax(3) = mountinghole3shape->Rmin(3); | |
1781 | mountinghole3shape->Z(3) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta, | |
1782 | mountinghole3shape->GetRmax(3)); | |
1783 | ||
1784 | // The Cable Hole is even more complicated, a Composite Shape | |
1785 | // is unavoidable here (gosh!) | |
1786 | TGeoPcon *coneshapecopy = new TGeoPcon("conecopy",0.0, 360.0, 12); | |
1787 | ||
1788 | for (Int_t i=0; i<12; i++) { | |
1789 | coneshapecopy->Rmin(i) = coneshape->GetRmin(i); | |
1790 | coneshapecopy->Rmax(i) = coneshape->GetRmax(i); | |
1791 | coneshapecopy->Z(i) = coneshape->GetZ(i); | |
1792 | } | |
1793 | ||
1794 | holePhi = (kCableHoleWidth/kCableHoleRout)*TMath::RadToDeg(); | |
1795 | TGeoConeSeg *chCS = new TGeoConeSeg("chCS", 0.5*kConeZLength, | |
1796 | kCableHoleRin, kCableHoleRout, | |
1797 | kCableHoleRin, kCableHoleRout, | |
1798 | -0.5*holePhi, 0.5*holePhi); | |
1799 | ||
1800 | TGeoCompositeShape *cableholeshape = new TGeoCompositeShape( | |
1801 | "SSDCableHoleShape", | |
1802 | "conecopy*chCS"); | |
1803 | ||
1804 | if(GetDebug(1)){ | |
1805 | chCS->InspectShape(); | |
1806 | cableholeshape->InspectShape(); | |
1807 | } | |
1808 | ||
1809 | // SSD Cone Wings: Tube and TubeSeg shapes | |
1810 | Double_t angleWideWing, angleWideWingThickness; | |
1811 | angleWideWing = (kWingWidth/kWingRmax)*TMath::RadToDeg(); | |
1812 | angleWideWingThickness = (kCFThickness/kWingRmax)*TMath::RadToDeg(); | |
1813 | ||
1814 | TGeoTubeSeg *wingshape = new TGeoTubeSeg(kConeROuterMax, kWingRmax, | |
1815 | kWingHalfThick, | |
1816 | 0, angleWideWing); | |
1817 | ||
1818 | TGeoTubeSeg *winginsertshape = new TGeoTubeSeg(kConeROuterMax, | |
1819 | kWingRmax-kCFThickness, | |
1820 | kWingHalfThick-kCFThickness, | |
1821 | angleWideWingThickness, | |
1822 | angleWideWing-angleWideWingThickness); | |
1823 | ||
1824 | // SDD support plate, SSD side (Mounting Bracket): a TubeSeg | |
1825 | TGeoTubeSeg *bracketshape = new TGeoTubeSeg(kBracketRmin, kBracketRmax, | |
1826 | kBracketHalfLength, -kBracketPhi/2, kBracketPhi/2); | |
1827 | ||
1828 | ||
1829 | // We have the shapes: now create the real volumes | |
1830 | ||
1831 | TGeoVolume *cfcone = new TGeoVolume("SSDCarbonFiberCone", | |
1832 | coneshape,medSSDcf); | |
1833 | cfcone->SetVisibility(kTRUE); | |
1834 | cfcone->SetLineColor(4); // Blue | |
1835 | cfcone->SetLineWidth(1); | |
1836 | cfcone->SetFillColor(cfcone->GetLineColor()); | |
1837 | cfcone->SetFillStyle(4000); // 0% transparent | |
1838 | ||
1839 | TGeoVolume *cfconeinsert = new TGeoVolume("SSDCarbonFiberConeInsert", | |
1840 | coneinsertshape,medSSDste); | |
1841 | cfconeinsert->SetVisibility(kTRUE); | |
1842 | cfconeinsert->SetLineColor(2); // Red | |
1843 | cfconeinsert->SetLineWidth(1); | |
1844 | cfconeinsert->SetFillColor(cfconeinsert->GetLineColor()); | |
1845 | cfconeinsert->SetFillStyle(4050); // 50% transparent | |
1846 | ||
1847 | TGeoVolume *cfconefoam1 = new TGeoVolume("SSDCarbonFiberConeFoam1", | |
1848 | conefoam1shape,medSSDroh); | |
1849 | cfconefoam1->SetVisibility(kTRUE); | |
1850 | cfconefoam1->SetLineColor(3); // Green | |
1851 | cfconefoam1->SetLineWidth(1); | |
1852 | cfconefoam1->SetFillColor(cfconefoam1->GetLineColor()); | |
1853 | cfconefoam1->SetFillStyle(4050); // 50% transparent | |
1854 | ||
1855 | TGeoVolume *cfconefoam2 = new TGeoVolume("SSDCarbonFiberConeFoam2", | |
1856 | conefoam2shape,medSSDroh); | |
1857 | cfconefoam2->SetVisibility(kTRUE); | |
1858 | cfconefoam2->SetLineColor(3); // Green | |
1859 | cfconefoam2->SetLineWidth(1); | |
1860 | cfconefoam2->SetFillColor(cfconefoam2->GetLineColor()); | |
1861 | cfconefoam2->SetFillStyle(4050); // 50% transparent | |
1862 | ||
1863 | TGeoVolume *coolinghole = new TGeoVolume("SSDCoolingHole", | |
1864 | coolingholeshape,medSSDair); | |
1865 | coolinghole->SetVisibility(kTRUE); | |
1866 | coolinghole->SetLineColor(5); // Yellow | |
1867 | coolinghole->SetLineWidth(1); | |
1868 | coolinghole->SetFillColor(coolinghole->GetLineColor()); | |
1869 | coolinghole->SetFillStyle(4090); // 90% transparent | |
1870 | ||
1871 | TGeoVolume *mountinghole = new TGeoVolume("SSDMountingHole", | |
1872 | mountingholeshape,medSSDair); | |
1873 | mountinghole->SetVisibility(kTRUE); | |
1874 | mountinghole->SetLineColor(5); // Yellow | |
1875 | mountinghole->SetLineWidth(1); | |
1876 | mountinghole->SetFillColor(mountinghole->GetLineColor()); | |
1877 | mountinghole->SetFillStyle(4090); // 90% transparent | |
1878 | ||
1879 | TGeoVolume *mountinghole2 = new TGeoVolume("SSDMountingHole2", | |
1880 | mountinghole2shape,medSSDair); | |
1881 | mountinghole2->SetVisibility(kTRUE); | |
1882 | mountinghole2->SetLineColor(5); // Yellow | |
1883 | mountinghole2->SetLineWidth(1); | |
1884 | mountinghole2->SetFillColor(mountinghole2->GetLineColor()); | |
1885 | mountinghole2->SetFillStyle(4090); // 90% transparent | |
1886 | ||
1887 | TGeoVolume *mountinghole3 = new TGeoVolume("SSDMountingHole3", | |
1888 | mountinghole3shape,medSSDair); | |
1889 | mountinghole3->SetVisibility(kTRUE); | |
1890 | mountinghole3->SetLineColor(5); // Yellow | |
1891 | mountinghole3->SetLineWidth(1); | |
1892 | mountinghole3->SetFillColor(mountinghole3->GetLineColor()); | |
1893 | mountinghole3->SetFillStyle(4090); // 90% transparent | |
1894 | ||
1895 | TGeoVolume *wing = new TGeoVolume("SSDWing",wingshape,medSSDcf); | |
1896 | wing->SetVisibility(kTRUE); | |
1897 | wing->SetLineColor(4); // Blue | |
1898 | wing->SetLineWidth(1); | |
1899 | wing->SetFillColor(wing->GetLineColor()); | |
1900 | wing->SetFillStyle(4000); // 0% transparent | |
1901 | ||
1902 | TGeoVolume *cablehole = new TGeoVolume("SSDCableHole", | |
1903 | cableholeshape,medSSDair); | |
1904 | cablehole->SetVisibility(kTRUE); | |
1905 | cablehole->SetLineColor(5); // Yellow | |
1906 | cablehole->SetLineWidth(1); | |
1907 | cablehole->SetFillColor(cablehole->GetLineColor()); | |
1908 | cablehole->SetFillStyle(4090); // 90% transparent | |
1909 | ||
1910 | TGeoVolume *winginsert = new TGeoVolume("SSDWingInsert", | |
1911 | winginsertshape,medSSDste); | |
1912 | winginsert->SetVisibility(kTRUE); | |
1913 | winginsert->SetLineColor(2); // Red | |
1914 | winginsert->SetLineWidth(1); | |
1915 | winginsert->SetFillColor(winginsert->GetLineColor()); | |
1916 | winginsert->SetFillStyle(4050); // 50% transparent | |
1917 | ||
1918 | TGeoVolume *bracket = new TGeoVolume("SSDMountingBracket", | |
1919 | bracketshape,medSSDal); | |
1920 | bracket->SetVisibility(kTRUE); | |
1921 | bracket->SetLineColor(6); // Purple | |
1922 | bracket->SetLineWidth(1); | |
1923 | bracket->SetFillColor(bracket->GetLineColor()); | |
1924 | bracket->SetFillStyle(4000); // 0% transparent | |
1925 | ||
1926 | // Mount up a cone | |
1927 | for (Int_t i=0; i<(Int_t)(360./kMountingHolePhi); i++) { | |
1928 | Double_t phiH = i*kMountingHolePhi + 0.5*kMountingHolePhi; | |
1929 | cfconefoam2->AddNode(mountinghole,i+1, new TGeoRotation("", phiH, 0, 0)); | |
1930 | } | |
1931 | ||
1932 | cfconeinsert->AddNode(cfconefoam1,1,0); | |
1933 | cfconeinsert->AddNode(cfconefoam2,1,0); | |
1934 | ||
1935 | cfcone->AddNode(cfconeinsert,1,0); | |
1936 | ||
1937 | for (Int_t i=0; i<(Int_t)(360./kCoolingHolePhi); i++) { | |
1938 | Double_t phiH = i*kCoolingHolePhi + 0.5*kCoolingHolePhi; | |
1939 | cfcone->AddNode(coolinghole,i+1, new TGeoRotation("", phiH, 0, 0)); | |
1940 | cfcone->AddNodeOverlap(cablehole,i+1, new TGeoRotation("", phiH, 0, 0)); | |
1941 | } | |
1942 | ||
1943 | for (Int_t i=0; i<(Int_t)(360./kMountingHolePhi); i++) { | |
1944 | Double_t phiH = i*kMountingHolePhi + 0.5*kMountingHolePhi; | |
1945 | cfcone->AddNode(mountinghole2,i+1, new TGeoRotation("", phiH, 0, 0)); | |
1946 | cfcone->AddNode(mountinghole3,i+1, new TGeoRotation("", phiH, 0, 0)); | |
1947 | } | |
1948 | ||
1949 | wing->AddNode(winginsert,1,0); | |
1950 | ||
1951 | // Add all volumes in the Cone assembly | |
1952 | vC->AddNode(cfcone,1,new TGeoTranslation(0,0,-kConeZPosition)); | |
1953 | ||
1954 | for (Int_t i=0; i<4; i++) { | |
1955 | Double_t thetaW = kThetaWing + 90.*i; | |
1956 | vC->AddNode(wing, i+1, new TGeoCombiTrans(0, 0, -kConeZPosition, | |
1957 | new TGeoRotation("",thetaW,180,0))); | |
1958 | } | |
1959 | ||
1960 | Double_t zBracket = kConeZPosition - coneshape->GetZ(9) + | |
1961 | bracketshape->GetDz(); | |
1962 | for (Int_t i=0; i<3; i++) { | |
1963 | Double_t thetaB = 60 + 120.*i; | |
1964 | vC->AddNode(bracket, i+1, new TGeoCombiTrans(0, 0, -zBracket, | |
1965 | new TGeoRotation("",thetaB,0,0))); | |
1966 | } | |
1967 | ||
1968 | // Finally put everything in the mother volume | |
1969 | moth->AddNode(cfcylinder,1,0); | |
1970 | ||
1971 | moth->AddNode(vC, 1, 0 ); | |
1972 | moth->AddNode(vC, 2, new TGeoRotation("",180, 180, 0) ); | |
1973 | ||
1974 | // Some debugging if requested | |
1975 | if(GetDebug(1)){ | |
1976 | vC->PrintNodes(); | |
1977 | vC->InspectShape(); | |
1978 | } | |
1979 | ||
1980 | return; | |
172b0d90 | 1981 | } |
1982 | ||
1983 | //______________________________________________________________________ | |
543b7370 | 1984 | void AliITSv11GeometrySupport::ServicesCableSupport(TGeoVolume *moth, |
1985 | TGeoManager *mgr){ | |
172b0d90 | 1986 | // Define the detail ITS cable support trays on both the RB24 and |
1987 | // RB26 sides.. | |
1988 | // Inputs: | |
543b7370 | 1989 | // TGeoVolume *moth The mother volume to place this object. |
1990 | // TGeoManager *mgr A pointer to the Geo-Manager default gGeoManager | |
172b0d90 | 1991 | // Outputs: |
1992 | // none. | |
1993 | // Return: | |
1994 | // none. | |
1995 | // Based on the Drawings SSup_201A.jpg unless otherwise stated, | |
1996 | // Volumes A..., | |
cee918ed | 1997 | TGeoMedium *medSUPcf = 0; // SUP support cone Carbon Fiber materal nbr. |
1998 | TGeoMedium *medSUPfs = 0; // SUP support cone inserto stesalite 4411w. | |
1999 | TGeoMedium *medSUPfo = 0; // SUP support cone foam, Rohacell 50A. | |
2000 | TGeoMedium *medSUPss = 0; // SUP support cone screw material,Stainless | |
2001 | TGeoMedium *medSUPair = 0; // SUP support cone Air | |
2002 | TGeoMedium *medSUPal = 0; // SUP support cone SDD mounting bracket Al | |
2003 | TGeoMedium *medSUPwater = 0; // SUP support cone Water | |
cee918ed | 2004 | medSUPcf = mgr->GetMedium("ITSssdCarbonFiber"); |
2005 | medSUPfs = mgr->GetMedium("ITSssdStaselite4411w"); | |
2006 | medSUPfo = mgr->GetMedium("ITSssdRohacell50A"); | |
2007 | medSUPss = mgr->GetMedium("ITSssdStainlessSteal"); | |
2008 | medSUPair = mgr->GetMedium("ITSssdAir"); | |
2009 | medSUPal = mgr->GetMedium("ITSssdAl"); | |
2010 | medSUPwater = mgr->GetMedium("ITSssdWater"); | |
172b0d90 | 2011 | // |
543b7370 | 2012 | Int_t i,j,iRmin; |
db486a6e | 2013 | Double_t x,y,z,t,t0,dt,di,r,l,local[3],master[3]; |
2014 | Char_t name[100]; | |
2015 | Double_t r1,r2,m; | |
2016 | // RB 24, Open Side. | |
cee918ed | 2017 | const Double_t kfrm24Z0 = 900*fgkmm;//SSup_203A.jpg |
2018 | const Double_t kfrm24Thss = 5.0*fgkmm; | |
2019 | const Double_t kfrm24Rss = 444.5*fgkmm-kfrm24Thss; //SSup_204A.jpg | |
2020 | const Double_t kfrm24Width = 10.0*fgkmm; | |
2021 | const Double_t kfrm24Hight = 10.0*fgkmm; | |
2022 | const Double_t kfrm24Phi0 = 15.2*fgkDegree; // SSup_602A.jpg | |
2023 | const Double_t kfrm24Phi1 = (90.0-7.6)*fgkDegree; // SSup_802A.jpg | |
2024 | const Double_t kfrm24ZssSection = (415.0-10.0)*fgkmm; | |
2025 | const Int_t kfrm24NZsections = 4; | |
2026 | const Int_t kfrm24NPhiSections = 4; | |
2027 | const Int_t kfrm24NPhi = 4; | |
db486a6e | 2028 | // These numbers are guessed at. |
2029 | const Double_t kfrm24ZfracAngle = 0.55; // frational z length to brack | |
2030 | const Double_t kfrm24Angle = 10.0*fgkDegree; // Guessed at | |
2031 | // | |
2032 | TGeoTubeSeg *sA24[kfrm24NZsections+1]; | |
2033 | TGeoArb8 *sB24[kfrm24NZsections+1]; | |
db486a6e | 2034 | Double_t zA24[kfrm24NZsections+1]; |
2035 | l = 4.*kfrm24ZssSection+5*kfrm24Width; | |
543b7370 | 2036 | j = iRmin = 0; |
db486a6e | 2037 | for(i=0;i<kfrm24NZsections+1;i++){ |
2038 | sprintf(name,"ITS sup Cable tray support frame radial section A24[%d]", | |
2039 | i); | |
2040 | r1 = kfrm24Rss; | |
2041 | if(i==0) zA24[i] = kfrm24Width; | |
2042 | else zA24[i] = zA24[i-1] + kfrm24ZssSection + kfrm24Width; | |
2043 | if(zA24[i]>l*kfrm24ZfracAngle){ // break, radii get larger | |
2044 | r1 = kfrm24Rss + (zA24[i]-kfrm24ZfracAngle*l)*SinD(kfrm24Angle); | |
2045 | } // end if | |
2046 | r2 = r1+kfrm24Thss; | |
2047 | sA24[i] = new TGeoTubeSeg(name,r1,r2,0.5*kfrm24Width,kfrm24Phi0, | |
2048 | kfrm24Phi1); | |
543b7370 | 2049 | if(i>0)if(sA24[i-1]->GetRmin()==sA24[i]->GetRmin()) j = iRmin = i; |
db486a6e | 2050 | } // end for i |
2051 | for(i=0;i<kfrm24NZsections;i++){ | |
2052 | sprintf(name,"ITS sup Cable tray support frame Z section B24[%d]",i); | |
2053 | sB24[i] = new TGeoArb8(name,0.5*kfrm24ZssSection); | |
2054 | sB24[i]->SetVertex(0,sA24[i]->GetRmin(),0.5*kfrm24Hight); | |
2055 | sB24[i]->SetVertex(1,sA24[i]->GetRmax(),0.5*kfrm24Hight); | |
2056 | sB24[i]->SetVertex(2,sA24[i]->GetRmin(),-0.5*kfrm24Hight); | |
2057 | sB24[i]->SetVertex(3,sA24[i]->GetRmax(),-0.5*kfrm24Hight); | |
2058 | sB24[i]->SetVertex(4,sA24[i+1]->GetRmin(),0.5*kfrm24Hight); | |
2059 | sB24[i]->SetVertex(5,sA24[i+1]->GetRmax(),0.5*kfrm24Hight); | |
2060 | sB24[i]->SetVertex(6,sA24[i+1]->GetRmin(),-0.5*kfrm24Hight); | |
2061 | sB24[i]->SetVertex(7,sA24[i+1]->GetRmax(),-0.5*kfrm24Hight); | |
2062 | } // end for i | |
543b7370 | 2063 | if(GetDebug(1)){ |
db486a6e | 2064 | for(i=0;i<kfrm24NZsections+1;i++) sA24[i]->InspectShape(); |
2065 | for(i=0;i<kfrm24NZsections;i++) sB24[i]->InspectShape(); | |
543b7370 | 2066 | } // end if GetDebug(1) |
2067 | TGeoVolume *vA24[kfrm24NZsections+1],*vB24[kfrm24NZsections]; | |
2068 | TGeoVolumeAssembly *vM24; | |
172b0d90 | 2069 | TGeoTranslation *tran; |
db486a6e | 2070 | TGeoRotation *rot,*rot1; |
172b0d90 | 2071 | TGeoCombiTrans *tranrot; |
2072 | // | |
db486a6e | 2073 | for(i=0;i<kfrm24NZsections+1;i++){ |
2074 | vA24[i] = 0; | |
2075 | sprintf(name,"ITSsupFrameA24[%d]",i); | |
2076 | vA24[i] = new TGeoVolume(name,sA24[i],medSUPss); | |
2077 | vA24[i]->SetVisibility(kTRUE); | |
2078 | vA24[i]->SetLineColor(1); // black | |
2079 | vA24[i]->SetLineWidth(1); | |
2080 | vA24[i]->SetFillColor(vA24[i]->GetLineColor()); | |
2081 | vA24[i]->SetFillStyle(4000); // 0% transparent | |
2082 | } // end for i | |
2083 | for(i=0;i<kfrm24NZsections;i++){ | |
2084 | vB24[i] = 0; | |
2085 | sprintf(name,"ITSsupFrameB24[%d]",i); | |
2086 | vB24[i] = new TGeoVolume(name,sB24[i],medSUPss); | |
2087 | vB24[i]->SetVisibility(kTRUE); | |
2088 | vB24[i]->SetLineColor(1); // black | |
2089 | vB24[i]->SetLineWidth(1); | |
2090 | vB24[i]->SetFillColor(vB24[i]->GetLineColor()); | |
2091 | vB24[i]->SetFillStyle(4000); // 0% transparent | |
2092 | } // end for i | |
543b7370 | 2093 | vM24 = new TGeoVolumeAssembly("ITSsupFrameM24"); |
2094 | //vM24->SetVisibility(kTRUE); | |
2095 | //vM24->SetLineColor(7); // light blue | |
2096 | //vM24->SetLineWidth(1); | |
2097 | //vM24->SetFillColor(vM24->GetLineColor()); | |
2098 | //vM24->SetFillStyle(4090); // 90% transparent | |
cee918ed | 2099 | // |
db486a6e | 2100 | Int_t ncopyB24[kfrm24NPhiSections]; |
cee918ed | 2101 | t0 = kfrm24Phi0; |
2102 | dt = (kfrm24Phi1-kfrm24Phi0)/((Double_t)kfrm24NPhiSections); | |
2103 | for(i=0;i<=kfrm24NZsections;i++){ | |
db486a6e | 2104 | z = zA24[i]; |
172b0d90 | 2105 | tran = new TGeoTranslation("",0.0,0.0,z); |
db486a6e | 2106 | vM24->AddNode(vA24[i],1,tran); |
2107 | if(i<kfrm24NZsections){ | |
2108 | ncopyB24[i] = 1; | |
2109 | for(j=0;j<=kfrm24NPhiSections;j++){ | |
2110 | t = t0 + ((Double_t)j)*dt; | |
2111 | rot = new TGeoRotation("",0.0,0.0,t); | |
2112 | tranrot = new TGeoCombiTrans("",0.0,0.0,z+sB24[i]->GetDz(),rot); | |
543b7370 | 2113 | //delete rot;// rot not explicity used in AddNode functions. |
db486a6e | 2114 | vM24->AddNode(vB24[i],ncopyB24[i]++,tranrot); |
2115 | } // end for j | |
2116 | } // end if | |
172b0d90 | 2117 | } // end for i |
db486a6e | 2118 | tran = new TGeoTranslation("",0.0,0.0,kfrm24Z0); |
cee918ed | 2119 | moth->AddNode(vM24,1,tran); |
2120 | for(i=1;i<kfrm24NPhi;i++){ | |
172b0d90 | 2121 | di = (Double_t) i; |
2122 | rot = new TGeoRotation("",0.0,0.0,90.0*di); | |
db486a6e | 2123 | tranrot = new TGeoCombiTrans("",0.0,0.0,kfrm24Z0,rot); |
543b7370 | 2124 | //delete rot;// rot not explicity used in AddNode functions. |
cee918ed | 2125 | moth->AddNode(vM24,i+1,tranrot); |
172b0d90 | 2126 | } // end for i |
543b7370 | 2127 | if(GetDebug(1)){ |
db486a6e | 2128 | for(i=0;i<kfrm24NZsections+1;i++) vA24[i]->PrintNodes(); |
2129 | for(i=0;i<kfrm24NZsections;i++) vB24[i]->PrintNodes(); | |
cee918ed | 2130 | vM24->PrintNodes(); |
172b0d90 | 2131 | } // end if |
db486a6e | 2132 | //================================================================== |
2133 | // RB24 Cable Tray | |
2134 | const Double_t kct24WidthBottom = 44.0*fgkmm; // Serv-C_208.jpg | |
2135 | const Double_t kct24WidthTop = 46.0*fgkmm; // Serv-C_208.jpg | |
2136 | const Double_t kct24Hight = 51.0*fgkmm; // Serv-C_208.jpg | |
2137 | const Double_t kct24AlThick = 1.0*fgkmm; // Serv-C_208.jpg | |
2138 | const Double_t kct24CapWidth = 46.0*fgkmm; // Serv-C_208.jpg | |
2139 | const Double_t kct24CapEar = 5.0*fgkmm; // Guess | |
2140 | const Double_t kct24Rmin = 455.0*fgkmm; // Serv-C_203.jpg | |
2141 | const Double_t kct24CoolSectionH = 470.0*fgkmm-kct24Rmin;// Serv-C_203.jpg | |
2142 | const Double_t kct24CoolCableDivEar = 2.0*fgkmm; // Guess | |
2143 | const Int_t kct24Ntrays = 48; // Serv-C_205.jpg | |
2144 | //const Int_t kct24Ntubes = 3; // Serv-C_208.jpg | |
2145 | // Patch Pannels for RB 24 side | |
2146 | const Double_t kft24PPHightSPDFMD = 72.0*fgkmm; // Serv-C_SPD/FMD.jpg | |
2147 | const Double_t kft24PPHightSDDSSD = 104.0*fgkmm; // Serv-C_SDD/SSD.jpg | |
2148 | const Double_t kft24PPlength = 350.0*fgkmm;//Serv-C_SPD/SDD/SSD/FMD_1.jpg | |
2149 | const Double_t kft24Theta = 2.0*TMath::ATan2(kct24WidthBottom, | |
2150 | 2.0*kct24Rmin)*fgkRadian; // | |
2151 | const Int_t kft24NPatchPannels = 20; // | |
2152 | // | |
2153 | Double_t xp[12],yp[12]; | |
2154 | TGeoPcon *sMT24; | |
2155 | TGeoXtru *sT24,*sTs24,*sTl24,*sTt24,*sU24,*sVl24,*sVs24,*sW24; | |
2156 | TGeoXtru *s3PP24,*s2PP24,*sV3PP24,*sV2PP24; | |
2157 | // Outer Tray Full | |
2158 | sT24 = new TGeoXtru(3); | |
2159 | sT24->SetName("ITS sup Full Cable Tray for RB24 Side T24"); | |
2160 | xp[0] = -0.5*kct24WidthBottom; | |
543b7370 | 2161 | yp[0] = sA24[0]->GetRmax(); |
db486a6e | 2162 | yp[1] = yp[0] + kct24Hight-kct24CapEar; |
2163 | xp[1] = Xfrom2Points(xp[0],yp[0],-0.5*kct24WidthTop+kct24AlThick, | |
2164 | yp[0]+kct24Hight,yp[1]); | |
2165 | yp[2] = yp[1]; | |
2166 | xp[2] = xp[1]-kct24AlThick; | |
2167 | xp[3] = -0.5*kct24CapWidth; | |
2168 | yp[3] = yp[0] + kct24Hight; | |
2169 | xp[4] = -xp[3]; | |
2170 | yp[4] = yp[3]; | |
2171 | xp[5] = -xp[2]; | |
2172 | yp[5] = yp[2]; | |
2173 | xp[6] = -xp[1]; | |
2174 | yp[6] = yp[1]; | |
2175 | xp[7] = -xp[0]; | |
2176 | yp[7] = yp[0]; | |
2177 | sT24->DefinePolygon(8,xp,yp); | |
543b7370 | 2178 | sT24->DefineSection(0,zA24[0]-kfrm24Width,0.0,0.0,1.0); |
2179 | sT24->DefineSection(1,zA24[iRmin],0.0,0.0,1.0); | |
2180 | sT24->DefineSection(2,zA24[kfrm24NZsections]+kfrm24Width,0.0, | |
2181 | sA24[kfrm24NZsections]->GetRmax()-sA24[0]->GetRmin()); | |
db486a6e | 2182 | // RB 24 full tray no divider (for ALG and T0-V0 cables?) |
2183 | sW24 = new TGeoXtru(3); | |
2184 | sW24->SetName("ITS sup Cable Tray No Divider for RB24 Side W24"); | |
2185 | xp[0] = sT24->GetX(0) + kct24AlThick; | |
543b7370 | 2186 | yp[0] = sT24->GetY(0) + kct24AlThick; |
db486a6e | 2187 | yp[1] = sT24->GetY(3) - kct24AlThick; |
2188 | xp[1] = Xfrom2Points(sT24->GetX(0),sT24->GetY(0),sT24->GetX(1), | |
2189 | sT24->GetY(1),yp[1]) + kct24AlThick; | |
2190 | xp[2] = -xp[1]; | |
2191 | yp[2] = yp[1]; | |
2192 | xp[3] = -xp[0]; | |
2193 | yp[3] = yp[0]; | |
2194 | sW24->DefinePolygon(4,xp,yp); | |
2195 | for(i=0;i<sT24->GetNz();i++){ | |
2196 | sW24->DefineSection(i,sT24->GetZ(i),sT24->GetXOffset(i), | |
2197 | sT24->GetYOffset(i),sT24->GetScale(i)); | |
2198 | } // end for i | |
2199 | // Outer Tray Short | |
2200 | sTs24 = new TGeoXtru(3); | |
2201 | sTs24->SetName("ITS sup Short Cable Tray for RB24 Side Ts24"); | |
2202 | yp[0] = sT24->GetY(0) + kct24CoolSectionH; | |
2203 | xp[0] = Xfrom2Points(sT24->GetX(0),sT24->GetY(0),sT24->GetX(1), | |
2204 | sT24->GetY(1),yp[0]); | |
2205 | for(i=1;i<7;i++){ | |
2206 | xp[i] = sT24->GetX(i); | |
2207 | yp[i] = sT24->GetY(i); | |
2208 | } // end for i | |
2209 | xp[7] = -xp[0]; | |
2210 | yp[7] = yp[0]; | |
2211 | sTs24->DefinePolygon(8,xp,yp); | |
543b7370 | 2212 | sTs24->DefineSection(0,zA24[0] -kfrm24Width+kft24PPlength); |
2213 | sTs24->DefineSection(1,zA24[iRmin]); | |
2214 | sTs24->DefineSection(2,zA24[kfrm24NZsections]+kfrm24Width, | |
2215 | sT24->GetXOffset(2), | |
db486a6e | 2216 | sT24->GetYOffset(2),sT24->GetScale(2)); |
2217 | // Outer Tray Long | |
2218 | sTl24 = new TGeoXtru(3); | |
2219 | sTl24->SetName("ITS sup Long Cable Tray for RB24 Side Tl24"); | |
2220 | for(i=0;i<8;i++){ | |
2221 | xp[i] = sTs24->GetX(i); | |
2222 | yp[i] = sTs24->GetY(i); | |
2223 | } // End for i | |
2224 | sTl24->DefinePolygon(8,xp,yp); | |
543b7370 | 2225 | sTl24->DefineSection(0,zA24[0]-kfrm24Width,0.0,0.0,1.0); |
2226 | sTl24->DefineSection(1,zA24[iRmin],0.0,0.0,1.0); | |
2227 | sTl24->DefineSection(2,zA24[kfrm24NZsections]+kfrm24Width,0.0, | |
2228 | sA24[kfrm24NZsections]->GetRmax()-sA24[0]->GetRmin(),1.0); | |
db486a6e | 2229 | // Outer Tray for air Tubes |
2230 | sTt24 = new TGeoXtru(3); | |
2231 | sTt24->SetName("ITS sup Long Air Tube Tray for RB24 Side Tt24"); | |
2232 | xp[0] = sT24->GetX(0); | |
2233 | yp[0] = sT24->GetY(0); | |
2234 | xp[1] = sTl24->GetX(0); | |
2235 | yp[1] = sTl24->GetY(0); | |
2236 | xp[2] = -xp[1]; | |
2237 | yp[2] = yp[1]; | |
2238 | xp[3] = -xp[0]; | |
543b7370 | 2239 | yp[3] = yp[0]; |
db486a6e | 2240 | sTt24->DefinePolygon(4,xp,yp); |
543b7370 | 2241 | sTt24->DefineSection(0,zA24[0]-kfrm24Width,0.0,0.0,1.0); |
2242 | sTt24->DefineSection(1,zA24[iRmin],0.0,0.0,1.0); | |
2243 | sTt24->DefineSection(2,zA24[kfrm24NZsections]+kfrm24Width,0.0, | |
2244 | sA24[kfrm24NZsections]->GetRmax()-sA24[0]->GetRmin()); | |
db486a6e | 2245 | // Inner opening for cooling (lower) {inside sTt24} |
2246 | sU24 = new TGeoXtru(3); | |
2247 | sU24->SetName("ITS sup Cable Tray Cooling tube space RB24 Side U24"); | |
2248 | xp[0] = sTt24->GetX(0) + kct24AlThick; | |
2249 | yp[0] = sTt24->GetY(0) + kct24AlThick; | |
2250 | xp[1] = sTt24->GetX(1) + kct24AlThick; | |
2251 | yp[1] = sTt24->GetY(1) - kct24AlThick; | |
2252 | xp[2] = -xp[1]; | |
2253 | yp[2] = yp[1]; | |
2254 | xp[3] = -xp[0]; | |
2255 | yp[3] = yp[0]; | |
2256 | sU24->DefinePolygon(4,xp,yp); | |
2257 | for(i=0;i<sTt24->GetNz();i++){ | |
2258 | sU24->DefineSection(i,sTt24->GetZ(i),sTt24->GetXOffset(i), | |
2259 | sTt24->GetYOffset(i),sTt24->GetScale(i)); | |
2260 | } // end for i | |
2261 | // Inner opening for cables (upper) {inside sTl24} | |
2262 | sVl24 = new TGeoXtru(3); | |
2263 | sVl24->SetName("ITS sup Cable Tray Cable space RB24 Side Vl24"); | |
2264 | xp[0] = sTl24->GetX(0)+2.0*kct24AlThick; | |
2265 | yp[0] = sTl24->GetY(0); | |
2266 | yp[1] = yp[0] + kct24CoolCableDivEar; | |
2267 | xp[1] = Xfrom2Points(sTl24->GetX(0),sTl24->GetY(0), | |
2268 | sTl24->GetX(1),sTl24->GetY(1),yp[1])+2.0*kct24AlThick; | |
2269 | yp[2] = yp[1]; | |
2270 | xp[2] = xp[1] - kct24AlThick; | |
2271 | yp[3] = sTl24->GetY(3) - kct24AlThick; | |
2272 | xp[3] = Xfrom2Points(sTl24->GetX(0),sTl24->GetY(0),sTl24->GetX(1), | |
2273 | sTl24->GetY(1),yp[3]) + kct24AlThick; | |
2274 | xp[4] = -xp[3]; | |
2275 | yp[4] = yp[3]; | |
2276 | xp[5] = -xp[2]; | |
2277 | yp[5] = yp[2]; | |
2278 | xp[6] = -xp[1]; | |
2279 | yp[6] = yp[1]; | |
2280 | xp[7] = -xp[0]; | |
2281 | yp[7] = yp[0]; | |
2282 | sVl24->DefinePolygon(8,xp,yp); | |
2283 | for(i=0;i<sTl24->GetNz();i++){ | |
2284 | sVl24->DefineSection(i,sTl24->GetZ(i),sTl24->GetXOffset(i), | |
2285 | sTl24->GetYOffset(i),sTl24->GetScale(i)); | |
2286 | } // end for i | |
2287 | // Inner opening for cables (upper) {inside sTs24} | |
2288 | sVs24 = new TGeoXtru(3); | |
2289 | sVs24->SetName("ITS sup Cable Tray Cable space RB24 Side Vs24"); | |
2290 | sVs24->DefinePolygon(8,xp,yp); | |
2291 | for(i=0;i<8;i++){ | |
2292 | xp[i] = sVl24->GetX(i); | |
2293 | yp[i] = sVl24->GetY(i); | |
2294 | } // end for i | |
2295 | for(i=0;i<sTl24->GetNz();i++){ | |
2296 | sVs24->DefineSection(i,sTs24->GetZ(i),sTs24->GetXOffset(i), | |
2297 | sTs24->GetYOffset(i),sTs24->GetScale(i)); | |
2298 | } // end for i | |
2299 | //------------------------------------------------------------------ | |
2300 | // Patch Pannels on RB 24 Side | |
2301 | rot = new TGeoRotation("",0.0,0.0,-kft24Theta); // Gets Used later as well | |
2302 | rot1 = new TGeoRotation("",0.0,0.0,kft24Theta); // Gets Used later as well | |
2303 | s3PP24 = new TGeoXtru(2); | |
2304 | s3PP24->SetName("ITS sup 3 bay pach pannel RB24 side 3PP24"); | |
2305 | yp[5] = sT24->GetY(7) + kct24CoolSectionH; | |
2306 | xp[5] = Xfrom2Points(sT24->GetX(7),sT24->GetY(7),sT24->GetX(6), | |
2307 | sT24->GetY(6),yp[6]); | |
2308 | yp[6] = sT24->GetY(0) + kct24CoolSectionH; | |
2309 | xp[6] = Xfrom2Points(sT24->GetX(0),sT24->GetY(0),sT24->GetX(1), | |
2310 | sT24->GetY(1),yp[9]); | |
2311 | local[0] = xp[6]; local[1] = yp[6]; local[2] = 0.0; | |
2312 | rot1->LocalToMaster(local,master); | |
2313 | xp[0] = master[0]; | |
2314 | yp[0] = master[1]; | |
2315 | local[0] = xp[6]; local[1] = yp[6] + kft24PPHightSDDSSD; local[2] = 0.0; | |
2316 | rot1->LocalToMaster(local,master); | |
2317 | xp[1] = master[0]; | |
2318 | yp[1] = master[1]; | |
2319 | xp[2] = -xp[1]; | |
2320 | yp[2] = yp[1]; | |
2321 | xp[3] = -xp[0]; | |
2322 | yp[3] = yp[0]; | |
2323 | local[0] = xp[6]; local[1] = yp[6]; local[2] = 0.0; | |
2324 | rot1->MasterToLocal(local,master); | |
2325 | xp[4] = master[0]; | |
2326 | yp[4] = master[1]; | |
2327 | local[0] = xp[5]; local[1] = yp[5]; local[2] = 0.0; | |
2328 | rot1->LocalToMaster(local,master); | |
2329 | xp[7] = master[0]; | |
2330 | yp[7] = master[1]; | |
2331 | s3PP24->DefinePolygon(8,xp,yp); | |
2332 | s3PP24->DefineSection(0,0.0); | |
2333 | s3PP24->DefineSection(1,kft24PPlength); | |
2334 | // | |
2335 | s2PP24 = new TGeoXtru(2); | |
2336 | s2PP24->SetName("ITS sup 2 bay pach pannel RB24 side 2PP24"); | |
2337 | local[1] = sTl24->GetY(3); local[2] = 0.0; | |
2338 | local[0] = Xfrom2Points(sTl24->GetX(0),sTl24->GetY(0), | |
2339 | sTl24->GetX(1),sTl24->GetY(1),local[1]); | |
2340 | rot1->LocalToMaster(local,master); | |
2341 | xp[0] = master[0]; | |
2342 | yp[0] = master[1]; | |
2343 | local[1] = sTl24->GetY(3) + kft24PPHightSPDFMD; local[2] = 0.0; | |
2344 | local[0] = Xfrom2Points(sTl24->GetX(0),sTl24->GetY(0), | |
2345 | sTl24->GetX(1),sTl24->GetY(1),local[1]); | |
2346 | rot1->LocalToMaster(local,master); | |
2347 | xp[1] = master[0]; | |
2348 | yp[1] = master[1]; | |
2349 | yp[2] = sTl24->GetY(4) + kft24PPHightSPDFMD; | |
2350 | xp[2] = Xfrom2Points(sTl24->GetX(6),sTl24->GetY(6), | |
2351 | sTl24->GetX(7),sTl24->GetY(7),yp[2]); | |
2352 | yp[3] = sTl24->GetY(7); | |
2353 | xp[3] = Xfrom2Points(sTl24->GetX(6),sTl24->GetY(6), | |
2354 | sTl24->GetX(7),sTl24->GetY(7),yp[3]); | |
2355 | xp[4] = sTl24->GetX(3); | |
2356 | yp[4] = sTl24->GetY(3); | |
2357 | local[0] = sTl24->GetX(4);local[1] = sTl24->GetY(4); local[2] = 0.0; | |
2358 | rot1->LocalToMaster(local,master); | |
2359 | xp[5] = master[0]; | |
2360 | yp[5] = master[1]; | |
2361 | s2PP24->DefinePolygon(6,xp,yp); | |
2362 | s2PP24->DefineSection(0,0.0); | |
2363 | s2PP24->DefineSection(1,kft24PPlength); | |
2364 | // | |
2365 | sV3PP24 = new TGeoXtru(2); | |
2366 | sV3PP24->SetName("ITS sup Patch Pannel 3 Bay inside Rb24 side V3PP24"); | |
2367 | xp[0] = s3PP24->GetX(0) + kct24AlThick; | |
543b7370 | 2368 | yp[0] = s3PP24->GetY(0) + kct24AlThick; |
db486a6e | 2369 | local[1] = s3PP24->GetY(6) + kft24PPHightSDDSSD - kct24AlThick;local[2]=0.; |
2370 | local[0] = Xfrom2Points(sTl24->GetX(0),sTl24->GetY(0), | |
2371 | sTl24->GetX(1),sTl24->GetY(1),local[1]); | |
2372 | rot1->LocalToMaster(local,master); | |
2373 | xp[1] = master[0]; | |
2374 | yp[1] = master[1]; | |
2375 | xp[2] = -xp[1]; | |
2376 | yp[2] = yp[1]; | |
2377 | xp[3] = -xp[0]; | |
2378 | yp[3] = yp[0]; | |
2379 | xp[4] = s3PP24->GetX(4); | |
2380 | yp[4] = s3PP24->GetY(4); | |
2381 | xp[5] = s3PP24->GetX(5); | |
2382 | yp[5] = s3PP24->GetY(5); | |
2383 | xp[6] = s3PP24->GetX(6); | |
2384 | yp[6] = s3PP24->GetY(6); | |
2385 | xp[7] = s3PP24->GetX(7); | |
2386 | yp[7] = s3PP24->GetY(7); | |
2387 | sV3PP24->DefinePolygon(8,xp,yp); | |
2388 | sV3PP24->DefineSection(0,s3PP24->GetZ(0),s3PP24->GetXOffset(0), | |
2389 | s3PP24->GetYOffset(0),s3PP24->GetScale(0)); | |
2390 | sV3PP24->DefineSection(1,s3PP24->GetZ(1),s3PP24->GetXOffset(1), | |
2391 | s3PP24->GetYOffset(1),s3PP24->GetScale(1)); | |
2392 | // | |
2393 | sV2PP24 = new TGeoXtru(2); | |
2394 | sV2PP24->SetName("ITS sup Patch Pannel 2 Bay inside Rb24 side V2PP24"); | |
2395 | xp[0] = s2PP24->GetX(0) + kct24AlThick; | |
543b7370 | 2396 | yp[0] = s2PP24->GetY(0) + kct24AlThick; |
db486a6e | 2397 | local[1] = sTl24->GetY(3) + kft24PPHightSPDFMD - kct24AlThick;local[2]=0.; |
2398 | local[0] = Xfrom2Points(sTl24->GetX(0),sTl24->GetY(0), | |
2399 | sTl24->GetX(1),sTl24->GetY(1),local[1]); | |
2400 | rot1->LocalToMaster(local,master); | |
2401 | xp[1] = master[0]; | |
2402 | yp[1] = master[1]; | |
2403 | yp[2] = sTl24->GetY(4) + kft24PPHightSPDFMD - kct24AlThick; | |
2404 | xp[2] = Xfrom2Points(sTl24->GetX(6),sTl24->GetY(6), | |
2405 | sTl24->GetX(7),sTl24->GetY(7),yp[2]); | |
2406 | yp[3] = sTl24->GetY(4); | |
2407 | xp[3] = Xfrom2Points(sTl24->GetX(6),sTl24->GetY(6), | |
2408 | sTl24->GetX(7),sTl24->GetY(7),yp[3]);; | |
2409 | xp[4] = s2PP24->GetX(4); | |
2410 | yp[4] = s2PP24->GetY(4); | |
2411 | xp[5] = s2PP24->GetX(5); | |
2412 | yp[5] = s2PP24->GetY(5); | |
2413 | sV2PP24->DefinePolygon(6,xp,yp); | |
2414 | sV2PP24->DefineSection(0,s2PP24->GetZ(0),s2PP24->GetXOffset(0), | |
2415 | s2PP24->GetYOffset(0),s2PP24->GetScale(0)); | |
2416 | sV2PP24->DefineSection(1,s2PP24->GetZ(1),s2PP24->GetXOffset(1), | |
2417 | s2PP24->GetYOffset(1),s2PP24->GetScale(1)); | |
2418 | // RB 24 Tray Mother Volume | |
2419 | sMT24 = new TGeoPcon("ITS sup Cable Tray Mother Volume RB24 MT24", | |
2420 | 0.0,360.0,5); | |
2421 | sMT24->Z(0) = 0.0; | |
543b7370 | 2422 | sMT24->Rmin(0) = sA24[0]->GetRmax(); |
db486a6e | 2423 | sMT24->Rmax(0) = TMath::Max(TMath::Hypot(s3PP24->GetX(1),s3PP24->GetY(1)), |
2424 | TMath::Hypot(s2PP24->GetX(1),s2PP24->GetY(1))); | |
2425 | ||
2426 | sMT24->Z(1) = sMT24->GetZ(0) + kft24PPlength; | |
2427 | sMT24->Rmin(1) = sMT24->GetRmin(0); | |
2428 | sMT24->Rmax(1) = sMT24->GetRmax(0); | |
2429 | sMT24->Z(2) = sMT24->GetZ(1); | |
2430 | sMT24->Rmin(2) = sMT24->GetRmin(0); | |
2431 | sMT24->Rmax(2) = sMT24->GetRmax(0) - kft24PPHightSPDFMD; | |
2432 | ||
543b7370 | 2433 | sMT24->Z(3) = sMT24->GetZ(0) + zA24[iRmin] - zA24[0] -kfrm24Width; |
2434 | sMT24->Rmin(3) = sA24[iRmin]->GetRmin(); | |
db486a6e | 2435 | sMT24->Rmax(3) = TMath::Hypot(sT24->GetX(3),sT24->GetY(3)); |
543b7370 | 2436 | sMT24->Z(4) = sMT24->GetZ(0) + zA24[kfrm24NZsections] + kfrm24Width - |
2437 | zA24[0] -kfrm24Width; | |
2438 | sMT24->Rmin(4) = sA24[kfrm24NZsections]->GetRmax(); | |
db486a6e | 2439 | sMT24->Rmax(4) = TMath::Hypot(sT24->GetX(3)+sT24->GetXOffset(2), |
2440 | sT24->GetY(3)+sT24->GetYOffset(2)); | |
2441 | // | |
543b7370 | 2442 | if(GetDebug(1)){ |
db486a6e | 2443 | sT24->InspectShape(); |
2444 | sW24->InspectShape(); | |
2445 | sTl24->InspectShape(); | |
2446 | sTs24->InspectShape(); | |
2447 | sTt24->InspectShape(); | |
2448 | sU24->InspectShape(); | |
2449 | sVl24->InspectShape(); | |
2450 | sVs24->InspectShape(); | |
2451 | s3PP24->InspectShape(); | |
2452 | s2PP24->InspectShape(); | |
2453 | sV3PP24->InspectShape(); | |
2454 | sV2PP24->InspectShape(); | |
2455 | sMT24->InspectShape(); | |
543b7370 | 2456 | } // end if GetDebug(1) |
db486a6e | 2457 | // |
2458 | TGeoVolume *vC24[kct24Ntrays],*vT24[kct24Ntrays],*vPP24[kft24NPatchPannels]; | |
543b7370 | 2459 | TGeoVolume *vWTV024,*vW24,*vU24,*vUFMD24,*vVl24,*vVlFMD24,*vVs24; |
db486a6e | 2460 | TGeoVolume *vV3PP24,*vV2PP24,*vV2PPFMD24; |
543b7370 | 2461 | TGeoVolumeAssembly *vMT24; |
2462 | vMT24 = new TGeoVolumeAssembly("ITSsupCableTrayMotherMT24"); | |
2463 | //vMT24->SetVisibility(kTRUE); | |
2464 | //vMT24->SetLineColor(8); // white | |
2465 | //vMT24->SetLineWidth(1); | |
2466 | //vMT24->SetFillColor(vMT24->GetLineColor()); | |
2467 | //vMT24->SetFillStyle(4100); // 100% transparent | |
db486a6e | 2468 | // |
2469 | vU24 = new TGeoVolume("ITSsupCableTrayLowerU24",sU24,medSUPair); | |
2470 | vU24->SetVisibility(kTRUE); | |
2471 | vU24->SetLineColor(7); // light blue | |
2472 | vU24->SetLineWidth(1); | |
2473 | vU24->SetFillColor(vU24->GetLineColor()); | |
2474 | vU24->SetFillStyle(4090); // 90% transparent | |
2475 | vUFMD24 = new TGeoVolume("FMDsupCableTrayLowerU24",sU24,medSUPair); | |
2476 | vUFMD24->SetVisibility(kTRUE); | |
2477 | vUFMD24->SetLineColor(7); // light blue | |
2478 | vUFMD24->SetLineWidth(1); | |
2479 | vUFMD24->SetFillColor(vUFMD24->GetLineColor()); | |
2480 | vUFMD24->SetFillStyle(4090); // 90% transparent | |
2481 | vVl24 = new TGeoVolume("ITSsupCableTrayUpperV24",sVl24,medSUPair); | |
2482 | vVl24->SetVisibility(kTRUE); | |
2483 | vVl24->SetLineColor(7); // light blue | |
2484 | vVl24->SetLineWidth(1); | |
2485 | vVl24->SetFillColor(vVl24->GetLineColor()); | |
2486 | vVl24->SetFillStyle(4090); // 90% transparent | |
2487 | vVlFMD24 = new TGeoVolume("FMDsupCableTrayUpperVl24",sVl24,medSUPair); | |
2488 | vVlFMD24->SetVisibility(kTRUE); | |
2489 | vVlFMD24->SetLineColor(7); // light blue | |
2490 | vVlFMD24->SetLineWidth(1); | |
2491 | vVlFMD24->SetFillColor(vVlFMD24->GetLineColor()); | |
2492 | vVlFMD24->SetFillStyle(4090); // 90% transparent | |
2493 | vVs24 = new TGeoVolume("ITSsupCableTrayUpperVs24",sVs24,medSUPair); | |
2494 | vVs24->SetVisibility(kTRUE); | |
2495 | vVs24->SetLineColor(7); // light blue | |
2496 | vVs24->SetLineWidth(1); | |
2497 | vVs24->SetFillColor(vVs24->GetLineColor()); | |
2498 | vVs24->SetFillStyle(4090); // 90% transparent | |
2499 | vW24 = new TGeoVolume("ITSsupCableTrayUpperW24",sW24,medSUPair); | |
2500 | vW24->SetVisibility(kTRUE); | |
2501 | vW24->SetLineColor(7); // light blue | |
2502 | vW24->SetLineWidth(1); | |
2503 | vW24->SetFillColor(vW24->GetLineColor()); | |
2504 | vW24->SetFillStyle(4090); // 90% transparent | |
2505 | // | |
2506 | vWTV024 = new TGeoVolume("V0supCableTrayUpperWTV024",sW24,medSUPair); | |
2507 | vWTV024->SetVisibility(kTRUE); | |
2508 | vWTV024->SetLineColor(7); // light blue | |
2509 | vWTV024->SetLineWidth(1); | |
2510 | vWTV024->SetFillColor(vWTV024->GetLineColor()); | |
2511 | vWTV024->SetFillStyle(4090); // 90% transparent | |
2512 | // | |
2513 | vV3PP24 = new TGeoVolume("ITSsup3BayPachPannelInsideV3PP24",sV3PP24,medSUPair); | |
2514 | vV3PP24->SetVisibility(kTRUE); | |
2515 | vV3PP24->SetLineColor(8); // white | |
2516 | vV3PP24->SetLineWidth(1); | |
2517 | vV3PP24->SetFillColor(vV3PP24->GetLineColor()); | |
2518 | vV3PP24->SetFillStyle(4100); // 100% transparent | |
2519 | vV2PP24 = new TGeoVolume("ITSsup2BayPachPannelInsideV2PP24",sV2PP24,medSUPair); | |
2520 | vV2PP24->SetVisibility(kTRUE); | |
2521 | vV2PP24->SetLineColor(8); // white | |
2522 | vV2PP24->SetLineWidth(1); | |
2523 | vV2PP24->SetFillColor(vV2PP24->GetLineColor()); | |
2524 | vV2PP24->SetFillStyle(4100); // 100% transparent | |
2525 | vV2PPFMD24 = new TGeoVolume("FMDsup2BayPachPannelInsideV2PP24",sV2PP24,medSUPair); | |
2526 | vV2PPFMD24->SetVisibility(kTRUE); | |
2527 | vV2PPFMD24->SetLineColor(8); // white | |
2528 | vV2PPFMD24->SetLineWidth(1); | |
2529 | vV2PPFMD24->SetFillColor(vV2PPFMD24->GetLineColor()); | |
2530 | vV2PPFMD24->SetFillStyle(4100); // 100% transparent | |
2531 | // | |
543b7370 | 2532 | //delete rot; |
2533 | //delete rot1; | |
db486a6e | 2534 | // |
2535 | Double_t tha[kct24Ntrays],thb[kft24NPatchPannels]; | |
2536 | for(i=0;i<kct24Ntrays/4;i++) { | |
2537 | if(i==0) tha[0] = 17.0+0.5*kft24Theta; | |
2538 | else tha[i] = tha[i-1] + kft24Theta; | |
2539 | tha[i+ kct24Ntrays/4] = 90.0 + tha[i]; | |
2540 | tha[i+ kct24Ntrays/2] = 180.0 + tha[i]; | |
2541 | tha[i+3*kct24Ntrays/4] = 270.0 + tha[i]; | |
2542 | } // end for i | |
543b7370 | 2543 | if(GetDebug(1)) for(i=0;i<kct24Ntrays;i++) Info("ServicesCableSupport", |
db486a6e | 2544 | "tha[%d]=%f",i,tha[i]); |
2545 | Char_t *airName[kct24Ntrays]={"FMD0","SDD0","SSD0","SSD1","SPD0","SPD1", | |
2546 | "TV00","SDD1","SDD2","SPD2","SPD3","ALG0", | |
2547 | "SPD4","SPD5","SSD2","SSD3","SPD6","SPD7", | |
2548 | "TV01","SDD3","SDD4","SPD8","SPD9","ALG1", | |
2549 | "FMD1","SDD5","SSD4","SSD5","SPDA","SPDB", | |
2550 | "TV02","SDD6","SDD7","SPDC","SPDD","ALG2", | |
2551 | "SPDE","SPDF","SSD6","SSD7","SPDG","SPDH", | |
2552 | "TV03","SDD8","SDD9","SPDI","SPDJ","ALG3"}; | |
2553 | Char_t *trayName[kct24Ntrays]={"FMD0","SSD0","SSD1","SSD2","SSD3","SPD0", | |
2554 | "TV00","SDD0","SDD1","SDD2","SPD1","ALG0", | |
2555 | "SPD2","SSD4","SSD5","SSD6","SSD7","SPD3", | |
2556 | "TV01","SDD3","SDD4","SDD5","SPD4","ALG1", | |
2557 | "FMD1","SSD8","SSD9","SSDA","SSDB","SPD5", | |
2558 | "TV02","SDD6","SDD7","SDD8","SPD6","ALG2", | |
2559 | "SPD7","SSDC","SSDD","SSDE","SSDF","SPD8", | |
2560 | "TV03","SDD9","SDDA","SDDB","SPD9","ALG3"}; | |
2561 | // | |
2562 | //Int_t ncopyW24=1,ncopyU24=1,ncopyV24=1; | |
2563 | j = 0; | |
2564 | for(i=0;i<kct24Ntrays;i++){ | |
2565 | if(strncmp(trayName[i],"FMD",3)==0){ | |
2566 | sprintf(name,"FMDsupCableTrayT24[%s]",trayName[i]); | |
2567 | vT24[i] = new TGeoVolume(name,sTl24,medSUPal); | |
2568 | vT24[i]->AddNode(vVlFMD24,1,0); | |
2569 | }else if(strncmp(trayName[i],"TV0",3)==0){ | |
2570 | sprintf(name,"V0supCableTrayT24[%s]",trayName[i]); | |
2571 | vT24[i] = new TGeoVolume(name,sT24,medSUPal); | |
2572 | vT24[i]->AddNode(vWTV024,1,0); | |
2573 | }else if(strncmp(trayName[i],"ALG",3)==0){ // ITS Alignment Channel | |
2574 | sprintf(name,"ITSsupCableTrayT24[%s]",trayName[i]); | |
2575 | vT24[i] = new TGeoVolume(name,sT24,medSUPal); | |
2576 | vT24[i]->AddNode(vW24,1,0); | |
2577 | }else if(strncmp(trayName[i],"SPD",3)==0){ /*ITS SPD*/ | |
2578 | sprintf(name,"ITSsupCableTrayT24[%s]",trayName[i]); | |
2579 | vT24[i] = new TGeoVolume(name,sTl24,medSUPal); | |
2580 | vT24[i]->AddNode(vVl24,1,0); | |
2581 | }else { /*ITS*/ | |
2582 | sprintf(name,"ITSsupCableTrayT24[%s]",trayName[i]); | |
2583 | vT24[i] = new TGeoVolume(name,sTs24,medSUPal); /// replace solid | |
2584 | vT24[i]->AddNode(vVs24,1,0); | |
2585 | } // end if | |
2586 | vT24[i]->SetVisibility(kTRUE); | |
2587 | vT24[i]->SetLineColor(6); // purple | |
2588 | vT24[i]->SetLineWidth(1); | |
2589 | vT24[i]->SetFillColor(vT24[i]->GetLineColor()); | |
2590 | vT24[i]->SetFillStyle(4000); // 0% transparent | |
2591 | rot = new TGeoRotation("",0.0,0.0,tha[i]-90.0); | |
543b7370 | 2592 | if(GetDebug(1)) rot->Print(); |
db486a6e | 2593 | vMT24->AddNode(vT24[i],1,rot); |
2594 | // | |
2595 | if(strncmp(trayName[i],"FMD",3)==0){ | |
2596 | sprintf(name,"FMDsupAirTubeTrayT24[%s]",airName[i]); | |
2597 | vC24[j] = new TGeoVolume(name,sTt24,medSUPair); | |
2598 | vC24[j]->AddNode(vUFMD24,1,0); | |
2599 | }else if(strncmp(trayName[i],"TV0",3)==0){ | |
2600 | continue; | |
2601 | }else if(strncmp(trayName[i],"ALG",3)==0){ | |
2602 | continue; | |
2603 | }else{ /*ITS*/ | |
2604 | sprintf(name,"ITSsupAirTubTrayT24[%s]",airName[i]); | |
2605 | vC24[j] = new TGeoVolume(name,sTt24,medSUPair); | |
2606 | vC24[j]->AddNode(vU24,1,0); | |
2607 | } // end if | |
2608 | vC24[j]->SetVisibility(kTRUE); | |
2609 | vC24[j]->SetLineColor(6); // purple | |
2610 | vC24[j]->SetLineWidth(1); | |
2611 | vC24[j]->SetFillColor(vC24[j]->GetLineColor()); | |
2612 | vC24[j]->SetFillStyle(4000); // 0% transparent | |
2613 | vMT24->AddNode(vC24[j++],1,rot); | |
2614 | } // end for i | |
2615 | for(i=0;i<kft24NPatchPannels/4;i++) { | |
2616 | if(i==0) thb[0] = 17.0+0.5*kft24Theta; | |
2617 | else{ | |
2618 | if(i%2) thb[i] = thb[i-1] + 3.0*kft24Theta; | |
2619 | else thb[i] = thb[i-1] + 2.0*kft24Theta; | |
2620 | } // end if-else | |
2621 | thb[i+ kft24NPatchPannels/4] = 90.0 + thb[i]; | |
2622 | thb[i+ kft24NPatchPannels/2] = 180.0 + thb[i]; | |
2623 | thb[i+3*kft24NPatchPannels/4] = 270.0 + thb[i]; | |
2624 | } // end for i | |
2625 | Char_t *pachName[kft24NPatchPannels]={"FMD0","SSD0","SPD0","SDD0","SPD1", | |
2626 | "SPD2","SSD1","SPD3","SDD1","SPD4", | |
2627 | "FMD1","SSD2","SPD5","SDD2","SPD6", | |
2628 | "SPD7","SSD3","SPD8","SDD3","SPD9"}; | |
2629 | for(i=0;i<kft24NPatchPannels;i++){ | |
2630 | if(strncmp(pachName[i],"FMD",3)==0){ | |
2631 | sprintf(name,"FMDsupPatchPannelPP24[%s]",pachName[i]); | |
2632 | vPP24[i] = new TGeoVolume(name,s2PP24,medSUPal); | |
2633 | vPP24[i]->AddNode(vV2PPFMD24,1,0); | |
2634 | }else if(strncmp(pachName[i],"SPD",3)==0){ /*ITS SPD*/ | |
2635 | sprintf(name,"ITSsupPathcPannelPP24[%s]",pachName[i]); | |
2636 | vPP24[i] = new TGeoVolume(name,s2PP24,medSUPal); | |
2637 | vPP24[i]->AddNode(vV2PP24,1,0); | |
2638 | }else { /*ITS*/ | |
2639 | sprintf(name,"ITSsupPathcPannelPP24[%s]",pachName[i]); | |
2640 | vPP24[i] = new TGeoVolume(name,s3PP24,medSUPal); /// replace solid | |
2641 | vPP24[i]->AddNode(vV3PP24,1,0); | |
2642 | } // end if | |
2643 | vPP24[i]->SetVisibility(kTRUE); | |
2644 | vPP24[i]->SetLineColor(6); // purple | |
2645 | vPP24[i]->SetLineWidth(1); | |
2646 | vPP24[i]->SetFillColor(vPP24[i]->GetLineColor()); | |
2647 | vPP24[i]->SetFillStyle(4000); // 0% transparent | |
2648 | rot = new TGeoRotation("",0.0,0.0,thb[i]-90.0); | |
543b7370 | 2649 | if(GetDebug(1)) rot->Print(); |
db486a6e | 2650 | vMT24->AddNode(vPP24[i],1,rot); |
2651 | } // end for i | |
2652 | tran = new TGeoTranslation("",0.0,0.0,kfrm24Z0); | |
2653 | moth->AddNode(vMT24,1,tran); | |
543b7370 | 2654 | if(GetDebug(1)){ |
db486a6e | 2655 | for(i=0;i<kct24Ntrays;i++) vT24[i]->PrintNodes(); |
2656 | for(i=0;i<kct24Ntrays-8;i++) vC24[i]->PrintNodes(); | |
2657 | vU24->PrintNodes(); | |
2658 | vUFMD24->PrintNodes(); | |
2659 | vVl24->PrintNodes(); | |
2660 | vVlFMD24->PrintNodes(); | |
2661 | vVs24->PrintNodes(); | |
2662 | vW24->PrintNodes(); | |
2663 | vWTV024->PrintNodes(); | |
2664 | vMT24->PrintNodes(); | |
2665 | } // end if | |
172b0d90 | 2666 | //================================================================== |
2667 | // | |
db486a6e | 2668 | // RB 26, Muon Absober side |
cee918ed | 2669 | const Double_t kfrm26Z0 = -900*fgkmm;//SSup_203A.jpg |
2670 | const Double_t kfrm26Thss = 5.0*fgkmm; | |
2671 | const Double_t kfrm26R0ss = 444.5*fgkmm-kfrm26Thss; //SSup_204A.jpg | |
2672 | const Double_t kfrm26R1ss = 601.6*fgkmm-kfrm26Thss; //SSup_208A.jpg | |
2673 | const Double_t kfrm26Width = 10.0*fgkmm; | |
2674 | //const Double_t kfrm26Hight = 10.0*fgkmm; | |
2675 | const Double_t kfrm26Phi0 = 15.2*fgkDegree; // SSup_602A.jpg | |
2676 | const Double_t kfrm26Phi1 = (90.0-7.6)*fgkDegree; // SSup_802A.jpg | |
2677 | const Double_t kfrm26ZssSection = (415.0-10.0)*fgkmm; | |
2678 | const Int_t kfrm26NZsections = 4; | |
2679 | const Int_t kfrm26NPhiSections = 4; | |
2680 | const Int_t kfrm26NPhi = 4; | |
543b7370 | 2681 | TGeoConeSeg *sA26[kfrm26NZsections+1];//,*sM26;//Cylinderial support structure |
cee918ed | 2682 | TGeoArb8 *sB26; // Cylinderial support structure |
543b7370 | 2683 | /* |
cee918ed | 2684 | sM26 = new TGeoConeSeg("ITS sup Cable tray support frame mother volume " |
2685 | "M26",0.5*(4.*kfrm26ZssSection+5*kfrm26Width), | |
2686 | kfrm26R1ss,kfrm26R1ss+kfrm26Thss, | |
2687 | kfrm26R0ss,kfrm26R0ss+kfrm26Thss, | |
2688 | kfrm26Phi0,kfrm26Phi1); | |
543b7370 | 2689 | */ |
cee918ed | 2690 | m = -((kfrm26R1ss-kfrm26R0ss)/ |
2691 | (((Double_t)kfrm26NZsections)*(kfrm26ZssSection+kfrm26Width))); | |
2692 | for(i=0;i<kfrm26NZsections+1;i++){ | |
2693 | di = ((Double_t) i)*(kfrm26ZssSection+kfrm26Width); | |
172b0d90 | 2694 | sprintf(name, |
2695 | "ITS sup Cable tray support frame radial section A26[%d]",i); | |
cee918ed | 2696 | r1 = kfrm26R1ss+m*di; |
2697 | r2 = kfrm26R1ss+m*(di+kfrm26Width); | |
2698 | sA26[i] = new TGeoConeSeg(name,0.5*kfrm26Width,r2,r2+kfrm26Thss, | |
2699 | r1,r1+kfrm26Thss,kfrm26Phi0,kfrm26Phi1); | |
172b0d90 | 2700 | } // end for i |
cee918ed | 2701 | sB26 = new TGeoArb8("ITS sup Cable tray support frame Z section B26", |
2702 | 0.5*kfrm26ZssSection); | |
2703 | r = 0.25*(sA26[0]->GetRmax1()+sA26[0]->GetRmin1()+ | |
2704 | sA26[1]->GetRmax2()+sA26[1]->GetRmin2()); | |
2705 | sB26->SetVertex(0,sA26[0]->GetRmax2()-r,+0.5*kfrm26Width); | |
2706 | sB26->SetVertex(1,sA26[0]->GetRmax2()-r,-0.5*kfrm26Width); | |
2707 | sB26->SetVertex(2,sA26[0]->GetRmin2()-r,-0.5*kfrm26Width); | |
2708 | sB26->SetVertex(3,sA26[0]->GetRmin2()-r,+0.5*kfrm26Width); | |
2709 | sB26->SetVertex(4,sA26[1]->GetRmax1()-r,+0.5*kfrm26Width); | |
2710 | sB26->SetVertex(5,sA26[1]->GetRmax1()-r,-0.5*kfrm26Width); | |
2711 | sB26->SetVertex(6,sA26[1]->GetRmin1()-r,-0.5*kfrm26Width); | |
2712 | sB26->SetVertex(7,sA26[1]->GetRmin1()-r,+0.5*kfrm26Width); | |
543b7370 | 2713 | if(GetDebug(1)){ |
d5219d0d | 2714 | for(i=0;i<kfrm26NZsections+1;i++) sA26[i]->InspectShape(); |
543b7370 | 2715 | //sM26->InspectShape(); |
d5219d0d | 2716 | sB26->InspectShape(); |
543b7370 | 2717 | } // end if GetDebug(1) |
d5219d0d | 2718 | // |
543b7370 | 2719 | TGeoVolume *vA26[kfrm26NZsections+1],*vB26; |
2720 | TGeoVolumeAssembly *vM26; | |
cee918ed | 2721 | // |
2722 | for(i=0;i<kfrm26NZsections+1;i++){ | |
172b0d90 | 2723 | sprintf(name,"ITSsupFrameA26[%d]",i); |
cee918ed | 2724 | vA26[i] = new TGeoVolume(name,sA26[i],medSUPss); |
2725 | vA26[i]->SetVisibility(kTRUE); | |
2726 | vA26[i]->SetLineColor(1); // black | |
2727 | vA26[i]->SetLineWidth(1); | |
2728 | vA26[i]->SetFillColor(vA26[i]->GetLineColor()); | |
2729 | vA26[i]->SetFillStyle(4000); // 0% transparent | |
172b0d90 | 2730 | } // end for i |
cee918ed | 2731 | vB26 = new TGeoVolume("ITSsupFrameB26",sB26,medSUPss); |
2732 | vB26->SetVisibility(kTRUE); | |
2733 | vB26->SetLineColor(1); // black | |
2734 | vB26->SetLineWidth(1); | |
2735 | vB26->SetFillColor(vB26->GetLineColor()); | |
2736 | vB26->SetFillStyle(4000); // 0% transparent | |
543b7370 | 2737 | vM26 = new TGeoVolumeAssembly("ITSsupFrameM26"); |
2738 | //vM26 = new TGeoVolume("ITSsupFrameM26",sM26,medSUPair); | |
2739 | //vM26->SetVisibility(kTRUE); | |
2740 | //vM26->SetLineColor(7); // light blue | |
2741 | //vM26->SetLineWidth(1); | |
2742 | //vM26->SetFillColor(vM26->GetLineColor()); | |
2743 | //vM26->SetFillStyle(4090); // 90% transparent | |
cee918ed | 2744 | // |
2745 | Int_t ncopyB26=1; | |
2746 | t0 = kfrm26Phi0; | |
2747 | dt = (kfrm26Phi1-kfrm26Phi0)/((Double_t)kfrm26NPhiSections); | |
2748 | for(i=0;i<=kfrm26NZsections;i++){ | |
2749 | di = ((Double_t) i)*(kfrm26ZssSection+kfrm26Width); | |
543b7370 | 2750 | z = 0.5*(4.*kfrm26ZssSection+5*kfrm26Width); |
2751 | z = -z+sA26[i]->GetDz() + di; | |
172b0d90 | 2752 | tran = new TGeoTranslation("",0.0,0.0,z); |
cee918ed | 2753 | vM26->AddNode(vA26[i],1,tran); |
2754 | z = z+sB26->GetDz(); | |
2755 | if(i<kfrm26NZsections)for(j=0;j<=kfrm26NPhiSections;j++){ | |
2756 | r = 0.25*(sA26[i]->GetRmax1()+sA26[i]->GetRmin1()+ | |
2757 | sA26[i+1]->GetRmax2()+sA26[i+1]->GetRmin2()); | |
172b0d90 | 2758 | t = t0 + ((Double_t)j)*dt; |
2759 | rot = new TGeoRotation("",0.0,0.0,t); | |
c023549c | 2760 | y = r*SinD(t); |
2761 | x = r*CosD(t); | |
172b0d90 | 2762 | tranrot = new TGeoCombiTrans("",x,y,z,rot); |
543b7370 | 2763 | //delete rot; // rot not explicity used in AddNode functions. |
cee918ed | 2764 | vM26->AddNode(vB26,ncopyB26++,tranrot); |
172b0d90 | 2765 | } // end for j |
2766 | } // end for i | |
543b7370 | 2767 | tran = new TGeoTranslation("",0.0,0.0,kfrm26Z0-0.5*(4.*kfrm26ZssSection+5*kfrm26Width)); |
cee918ed | 2768 | moth->AddNode(vM26,1,tran); |
2769 | for(i=1;i<kfrm26NPhi;i++){ | |
172b0d90 | 2770 | rot = new TGeoRotation("",0.0,0.0,90.0*((Double_t)i)); |
2771 | tranrot = new TGeoCombiTrans(*tran,*rot); | |
543b7370 | 2772 | //delete rot; // rot not explicity used in AddNode functions. |
cee918ed | 2773 | moth->AddNode(vM26,i+1,tranrot); |
172b0d90 | 2774 | } // end for i |
543b7370 | 2775 | if(GetDebug(1)){ |
cee918ed | 2776 | for(i=0;i<kfrm26NZsections+1;i++) vA26[i]->PrintNodes(); |
2777 | vB26->PrintNodes(); | |
2778 | vM26->PrintNodes(); | |
172b0d90 | 2779 | } // end if |
2780 | } |