]>
Commit | Line | Data |
---|---|---|
33959f40 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
bae7e562 | 18 | Revision 1.16 2001/01/30 09:23:13 hristov |
19 | Streamers removed (R.Brun) | |
20 | ||
a8a6107b | 21 | Revision 1.15 2001/01/17 07:41:29 barbera |
22 | Some media parameters modified | |
23 | ||
9cd18c59 | 24 | Revision 1.14 2001/01/15 13:13:53 barbera |
25 | Some comments added | |
26 | ||
faec2e21 | 27 | Revision 1.13 2000/12/10 16:00:45 barbera |
28 | Added last definition of special media like end-ladder boxes and cones | |
29 | ||
89909db5 | 30 | Revision 1.12 2000/11/02 15:44:23 barbera |
31 | Services on the opposite side w.r.t the absorber modified to make room for rails | |
32 | ||
4ebc1b6a | 33 | Revision 1.10 2000/10/27 17:19:50 barbera |
34 | Position of rails w.r.t. the interaction point corrected. | |
35 | ||
acb52b3d | 36 | Revision 1.9 2000/10/27 13:31:29 barbera |
37 | Rails between ITS and TPC added. | |
38 | ||
c54243df | 39 | Revision 1.8 2000/10/27 13:03:08 barbera |
40 | Small changes in the SPD volumes and materials | |
41 | ||
6c251614 | 42 | Revision 1.6 2000/10/16 14:45:37 barbera |
43 | Mother volume ITSD modified to avoid some overlaps | |
44 | ||
e8031268 | 45 | Revision 1.5 2000/10/16 13:49:15 barbera |
46 | Services volumes slightly modified and material added following Pierluigi Barberis' information | |
47 | ||
e6892b92 | 48 | Revision 1.4 2000/10/07 15:33:07 barbera |
49 | Small corrections to the ITSV mother volume | |
50 | ||
990d421f | 51 | Revision 1.3 2000/10/07 13:06:50 barbera |
52 | Some new materials and media defined | |
53 | ||
d12d92a5 | 54 | Revision 1.2 2000/10/07 10:58:15 barbera |
55 | Mother volume ITSV corrected | |
56 | ||
b16d3d87 | 57 | Revision 1.1 2000/10/06 23:09:24 barbera |
58 | New coarse geometry (asymmetric services | |
59 | ||
33959f40 | 60 | Revision 1.20 2000/10/02 21:28:08 fca |
61 | Removal of useless dependecies via forward declarations | |
62 | ||
63 | Revision 1.19 2000/07/10 16:07:19 fca | |
64 | Release version of ITS code | |
65 | ||
66 | Revision 1.14.2.2 2000/05/19 10:09:21 nilsen | |
67 | fix for bug with HP and Sun unix + fix for event display in ITS-working branch | |
68 | ||
69 | Revision 1.14.2.1 2000/03/04 23:45:19 nilsen | |
70 | Fixed up the comments/documentation. | |
71 | ||
72 | Revision 1.14 1999/11/25 06:52:56 fca | |
73 | Correct value of drca | |
74 | ||
75 | Revision 1.13.2.1 1999/11/25 06:52:21 fca | |
76 | Correct value of drca | |
77 | ||
78 | Revision 1.13 1999/10/27 11:16:26 fca | |
79 | Correction of problem in geometry | |
80 | ||
81 | Revision 1.12 1999/10/22 08:25:25 fca | |
82 | remove double definition of destructors | |
83 | ||
84 | Revision 1.11 1999/10/22 08:16:49 fca | |
85 | Correct destructors, thanks to I.Hrivnacova | |
86 | ||
87 | Revision 1.10 1999/10/06 19:56:50 fca | |
88 | Add destructor | |
89 | ||
90 | Revision 1.9 1999/10/05 08:05:09 fca | |
91 | Minor corrections for uninitialised variables. | |
92 | ||
93 | Revision 1.8 1999/09/29 09:24:20 fca | |
94 | Introduction of the Copyright and cvs Log | |
95 | ||
96 | */ | |
97 | ||
98 | /////////////////////////////////////////////////////////////////////////////// | |
99 | // // | |
100 | // Inner Traking System version PPR coarse asymmetric // | |
101 | // This class contains the base procedures for the Inner Tracking System // | |
102 | // // | |
103 | // Authors: R. Barbera | |
104 | // version 6. | |
105 | // Created 2000. | |
106 | // | |
107 | // NOTE: THIS IS THE COARSE ASYMMETRIC PPR geometry of the ITS. | |
108 | // THIS WILL NOT WORK | |
109 | // with the geometry or module classes or any analysis classes. You are | |
110 | // strongly encouraged to uses AliITSv5. | |
111 | // // | |
112 | /////////////////////////////////////////////////////////////////////////////// | |
bae7e562 | 113 | #include <iostream.h> |
33959f40 | 114 | #include <TMath.h> |
115 | #include <TRandom.h> | |
116 | #include <TVector.h> | |
117 | #include <TGeometry.h> | |
118 | #include <TNode.h> | |
119 | #include <TTUBE.h> | |
120 | #include <TFile.h> // only required for Tracking function? | |
121 | #include <TCanvas.h> | |
122 | #include <TObjArray.h> | |
123 | #include <TClonesArray.h> | |
124 | ||
125 | ||
126 | #include "AliMC.h" | |
127 | #include "AliMagF.h" | |
128 | #include "AliConst.h" | |
129 | ||
130 | #include "AliITShit.h" | |
131 | #include "AliITSvPPRcoarseasymm.h" | |
132 | #include "AliRun.h" | |
133 | ||
134 | ||
135 | ClassImp(AliITSvPPRcoarseasymm) | |
136 | ||
137 | //_____________________________________________________________________________ | |
138 | AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm() { | |
139 | //////////////////////////////////////////////////////////////////////// | |
140 | // Standard default constructor for the ITS version 6. | |
141 | //////////////////////////////////////////////////////////////////////// | |
142 | ||
bae7e562 | 143 | fIdN = 0; |
144 | fIdName = 0; | |
145 | fIdSens = 0; | |
146 | fMajorVersion = 9; | |
147 | fMinorVersion = 0; | |
33959f40 | 148 | } |
149 | //_____________________________________________________________________________ | |
150 | AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm(const char *name, const char *title) : AliITS(name, title){ | |
151 | //////////////////////////////////////////////////////////////////////// | |
152 | // Standard constructor for the ITS version 6. | |
153 | //////////////////////////////////////////////////////////////////////// | |
154 | ||
bae7e562 | 155 | fIdN = 6; |
156 | fIdName = new TString[fIdN]; | |
157 | fIdName[0] = "ITS1"; | |
158 | fIdName[1] = "ITS2"; | |
159 | fIdName[2] = "ITS3"; | |
160 | fIdName[3] = "ITS4"; | |
161 | fIdName[4] = "ITS5"; | |
162 | fIdName[5] = "ITS6"; | |
163 | fIdSens = new Int_t[fIdN]; | |
164 | for (Int_t i=0;i<fIdN;i++) fIdSens[i]=0; | |
165 | fMajorVersion = 9; | |
166 | fMinorVersion = 0; | |
33959f40 | 167 | } |
168 | //____________________________________________________________________________ | |
169 | AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm(const AliITSvPPRcoarseasymm &source){ | |
170 | //////////////////////////////////////////////////////////////////////// | |
171 | // Copy Constructor for ITS version 6. | |
172 | //////////////////////////////////////////////////////////////////////// | |
173 | if(&source == this) return; | |
bae7e562 | 174 | Warning("Copy Constructor","Not allowed to copy AliITSvPPRcoarseasymm"); |
33959f40 | 175 | return; |
176 | } | |
177 | //_____________________________________________________________________________ | |
178 | AliITSvPPRcoarseasymm& AliITSvPPRcoarseasymm::operator=(const AliITSvPPRcoarseasymm &source){ | |
179 | //////////////////////////////////////////////////////////////////////// | |
180 | // Assignment operator for the ITS version 6. | |
181 | //////////////////////////////////////////////////////////////////////// | |
182 | if(&source == this) return *this; | |
bae7e562 | 183 | Warning("= operator","Not allowed to copy AliITSvPPRcoarseasymm"); |
33959f40 | 184 | return *this; |
185 | } | |
186 | //_____________________________________________________________________________ | |
187 | AliITSvPPRcoarseasymm::~AliITSvPPRcoarseasymm() { | |
188 | //////////////////////////////////////////////////////////////////////// | |
189 | // Standard destructor for the ITS version 6. | |
190 | //////////////////////////////////////////////////////////////////////// | |
191 | } | |
192 | ||
193 | //__________________________________________________________________________ | |
194 | void AliITSvPPRcoarseasymm::BuildGeometry(){ | |
195 | //////////////////////////////////////////////////////////////////////// | |
196 | // Geometry builder for the ITS version 6. | |
197 | //////////////////////////////////////////////////////////////////////// | |
198 | TNode *node, *top; | |
199 | const int kColorITS=kYellow; | |
200 | // | |
201 | top = gAlice->GetGeometry()->GetNode("alice"); | |
202 | ||
203 | new TTUBE("S_layer1","Layer1 of ITS","void",3.95,3.95+0.05475,12.25); | |
204 | top->cd(); | |
205 | node = new TNode("Layer1","Layer1","S_layer1",0,0,0,""); | |
206 | node->SetLineColor(kColorITS); | |
207 | fNodes->Add(node); | |
208 | ||
209 | new TTUBE("S_layer2","Layer2 of ITS","void",7.,7.+0.05475,16.3); | |
210 | top->cd(); | |
211 | node = new TNode("Layer2","Layer2","S_layer2",0,0,0,""); | |
212 | node->SetLineColor(kColorITS); | |
213 | fNodes->Add(node); | |
214 | ||
215 | new TTUBE("S_layer3","Layer3 of ITS","void",15.,15.+0.05288,21.1); | |
216 | top->cd(); | |
217 | node = new TNode("Layer3","Layer3","S_layer3",0,0,0,""); | |
218 | node->SetLineColor(kColorITS); | |
219 | fNodes->Add(node); | |
220 | ||
221 | new TTUBE("S_layer4","Layer4 of ITS","void",24,24+0.05288,29.6); | |
222 | top->cd(); | |
223 | node = new TNode("Layer4","Layer4","S_layer4",0,0,0,""); | |
224 | node->SetLineColor(kColorITS); | |
225 | fNodes->Add(node); | |
226 | ||
227 | new TTUBE("S_layer5","Layer5 of ITS","void",40,40+0.05382,45.1); | |
228 | top->cd(); | |
229 | node = new TNode("Layer5","Layer5","S_layer5",0,0,0,""); | |
230 | node->SetLineColor(kColorITS); | |
231 | fNodes->Add(node); | |
232 | ||
233 | new TTUBE("S_layer6","Layer6 of ITS","void",45,45+0.05382,50.4); | |
234 | top->cd(); | |
235 | node = new TNode("Layer6","Layer6","S_layer6",0,0,0,""); | |
236 | node->SetLineColor(kColorITS); | |
237 | fNodes->Add(node); | |
238 | } | |
239 | //_____________________________________________________________________________ | |
240 | void AliITSvPPRcoarseasymm::CreateGeometry(){ | |
241 | //////////////////////////////////////////////////////////////////////// | |
242 | // This routine defines and Creates the geometry for version 6 of the ITS. | |
243 | //////////////////////////////////////////////////////////////////////// | |
244 | ||
245 | //INNER RADII OF THE SILICON LAYERS | |
6c251614 | 246 | Float_t rl[6] = { 3.8095,7.,15.,24.,38.1,43.5765 }; |
33959f40 | 247 | //THICKNESSES OF LAYERS (in % radiation length) |
6c251614 | 248 | Float_t drl[6] = { 1.03,1.03,0.94,0.95,0.91,0.87 }; |
33959f40 | 249 | //HALF LENGTHS OF LAYERS |
6c251614 | 250 | Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 }; |
33959f40 | 251 | //LENGTHS OF END-LADDER BOXES (ALL INCLUDED) |
89909db5 | 252 | Float_t dzb[6] = { 12.4,12.4,13.5,15.,7.5,7.5 }; |
33959f40 | 253 | //THICKNESSES OF END-LADDER BOXES (ALL INCLUDED) |
89909db5 | 254 | Float_t drb[6] = { rl[1]-rl[0],0.2,5.,5.,4.,4. }; |
33959f40 | 255 | |
256 | ||
257 | Float_t dits[3], rlim, zmax; | |
258 | Float_t zpos; | |
259 | Float_t pcits[15], xltpc; | |
260 | Int_t idrotm[399], i; | |
261 | Float_t dgh[50]; | |
262 | ||
263 | Int_t *idtmed = fIdtmed->GetArray()-199; | |
264 | ||
265 | // CONVERT INTO CM (RL(SI)=9.36 CM) | |
266 | for (i = 0; i < 6; ++i) { | |
267 | drl[i] = drl[i] / 100. * 9.36; | |
268 | } | |
269 | ||
270 | // FIELD CAGE HALF LENGTH | |
271 | ||
272 | rlim = 56.; | |
273 | zmax = 76.708; | |
274 | xltpc = 284.; | |
275 | ||
b16d3d87 | 276 | // --- Define ghost volume containing the whole ITS (including services) |
277 | // and fill it with air | |
278 | ||
279 | dgh[0] = 0.; | |
280 | dgh[1] = 360.; | |
281 | dgh[2] = 12.; | |
282 | dgh[3] = -xltpc-5.-0.1; | |
283 | dgh[4] = 44.9; | |
284 | dgh[5] = 85.; | |
285 | dgh[6] = -xltpc; | |
286 | dgh[7] = 44.9; | |
287 | dgh[8] = 85.; | |
288 | dgh[9] = -xltpc; | |
289 | dgh[10] = 44.9; | |
290 | dgh[11] = 56.1; | |
291 | dgh[12] = -100.7; | |
292 | dgh[13] = 44.9; | |
293 | dgh[14] = 56.1; | |
990d421f | 294 | dgh[15] = -77.2; |
b16d3d87 | 295 | dgh[16] = 44.9; |
296 | dgh[17] = 56.1; | |
6c251614 | 297 | dgh[18] = -40.; |
4ebc1b6a | 298 | dgh[19] = 3.295; |
b16d3d87 | 299 | dgh[20] = 56.1; |
6c251614 | 300 | dgh[21] = 40.; |
4ebc1b6a | 301 | dgh[22] = 3.295; |
b16d3d87 | 302 | dgh[23] = 56.1; |
990d421f | 303 | dgh[24] = 77.2; |
b16d3d87 | 304 | dgh[25] = 44.9; |
305 | dgh[26] = 56.1; | |
306 | dgh[27] = 100.7; | |
307 | dgh[28] = 44.9; | |
308 | dgh[29] = 56.1; | |
309 | dgh[30] = xltpc; | |
310 | dgh[31] = 61.5; | |
311 | dgh[32] = 61.5+4.; | |
312 | dgh[33] = xltpc; | |
313 | dgh[34] = 61.5; | |
314 | dgh[35] = 85.; | |
315 | dgh[36] = xltpc+4.+0.1; | |
316 | dgh[37] = 62.4; | |
317 | dgh[38] = 85.; | |
318 | ||
319 | gMC->Gsvolu("ITSV", "PCON", idtmed[275], dgh, 39); | |
320 | ||
321 | // --- Place the ghost volume in its mother volume (ALIC) and make it | |
322 | // invisible | |
323 | ||
324 | gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY"); | |
d12d92a5 | 325 | gMC->Gsatt("ITSV", "SEEN", 0); |
b16d3d87 | 326 | |
327 | ||
33959f40 | 328 | // --- Define ghost volume containing the six layers and fill it with air |
329 | ||
330 | dgh[0] = 0.; | |
331 | dgh[1] = 360.; | |
332 | dgh[2] = 4.; | |
e8031268 | 333 | dgh[3] = -77.2; |
33959f40 | 334 | dgh[4] = 45.; |
335 | dgh[5] = 56.; | |
6c251614 | 336 | dgh[6] = -40.; |
33959f40 | 337 | dgh[7] = 3.3; |
338 | dgh[8] = 56.; | |
6c251614 | 339 | dgh[9] = 40.; |
33959f40 | 340 | dgh[10] = 3.3; |
341 | dgh[11] = 56.; | |
e8031268 | 342 | dgh[12] = 77.2; |
33959f40 | 343 | dgh[13] = 45.; |
344 | dgh[14] = 56.; | |
b16d3d87 | 345 | gMC->Gsvolu("ITSD", "PCON", idtmed[275], dgh, 15); |
33959f40 | 346 | |
347 | // --- Place the ghost volume in its mother volume (ITSV) and make it | |
348 | // invisible | |
349 | ||
b16d3d87 | 350 | gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY"); |
146fb996 | 351 | //gMC->Gsatt("ITSD", "SEEN", 0); |
33959f40 | 352 | |
353 | // ITS LAYERS (SILICON) | |
354 | ||
355 | dits[0] = rl[0]; | |
356 | dits[1] = rl[0] + drl[0]; | |
357 | dits[2] = dzl[0]; | |
358 | gMC->Gsvolu("ITS1", "TUBE", idtmed[199], dits, 3); | |
b16d3d87 | 359 | gMC->Gspos("ITS1", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 360 | |
361 | dits[0] = rl[1]; | |
362 | dits[1] = rl[1] + drl[1]; | |
363 | dits[2] = dzl[1]; | |
364 | gMC->Gsvolu("ITS2", "TUBE", idtmed[199], dits, 3); | |
b16d3d87 | 365 | gMC->Gspos("ITS2", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 366 | |
367 | dits[0] = rl[2]; | |
368 | dits[1] = rl[2] + drl[2]; | |
369 | dits[2] = dzl[2]; | |
370 | gMC->Gsvolu("ITS3", "TUBE", idtmed[224], dits, 3); | |
b16d3d87 | 371 | gMC->Gspos("ITS3", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 372 | |
373 | dits[0] = rl[3]; | |
374 | dits[1] = rl[3] + drl[3]; | |
375 | dits[2] = dzl[3]; | |
376 | gMC->Gsvolu("ITS4", "TUBE", idtmed[224], dits, 3); | |
b16d3d87 | 377 | gMC->Gspos("ITS4", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 378 | |
379 | dits[0] = rl[4]; | |
380 | dits[1] = rl[4] + drl[4]; | |
381 | dits[2] = dzl[4]; | |
382 | gMC->Gsvolu("ITS5", "TUBE", idtmed[249], dits, 3); | |
b16d3d87 | 383 | gMC->Gspos("ITS5", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 384 | |
385 | dits[0] = rl[5]; | |
386 | dits[1] = rl[5] + drl[5]; | |
387 | dits[2] = dzl[5]; | |
388 | gMC->Gsvolu("ITS6", "TUBE", idtmed[249], dits, 3); | |
b16d3d87 | 389 | gMC->Gspos("ITS6", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 390 | |
d12d92a5 | 391 | // END-LADDER ELECTRONICS BOXES AND CABLES FOR SPD |
33959f40 | 392 | |
d12d92a5 | 393 | gMC->Gsvolu("IEL1", "TUBE", idtmed[208], dits, 0); |
394 | for (i = 0; i < 2; i++) { | |
33959f40 | 395 | dits[0] = rl[i]; |
396 | dits[1] = dits[0] + drb[i]; | |
397 | dits[2] = dzb[i] / 2.; | |
398 | zpos = dzl[i] + dits[2]; | |
d12d92a5 | 399 | gMC->Gsposp("IEL1", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); |
400 | gMC->Gsposp("IEL1", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
33959f40 | 401 | } |
d12d92a5 | 402 | |
403 | // END-LADDER ELECTRONICS BOXES AND CABLES FOR SDD | |
404 | ||
405 | gMC->Gsvolu("IEL2", "TUBE", idtmed[237], dits, 0); | |
89909db5 | 406 | for (i = 2; i < 3; i++) { |
407 | dits[0] = rl[i]-2.5; | |
408 | dits[1] = dits[0] + drb[i]; | |
409 | dits[2] = dzb[i] / 2.; | |
410 | zpos = dzl[i] + dits[2]; | |
411 | gMC->Gsposp("IEL2", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
412 | gMC->Gsposp("IEL2", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
413 | } | |
414 | for (i = 3; i < 4; i++) { | |
415 | dits[0] = rl[i]-1.4; | |
d12d92a5 | 416 | dits[1] = dits[0] + drb[i]; |
417 | dits[2] = dzb[i] / 2.; | |
418 | zpos = dzl[i] + dits[2]; | |
419 | gMC->Gsposp("IEL2", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
420 | gMC->Gsposp("IEL2", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
421 | } | |
422 | ||
423 | // END-LADDER ELECTRONICS BOXES AND CABLES FOR SSD | |
424 | ||
425 | gMC->Gsvolu("IEL3", "TUBE", idtmed[263], dits, 0); | |
89909db5 | 426 | for (i = 4; i < 5; i++) { |
427 | dits[0] = rl[i]+1.4; | |
d12d92a5 | 428 | dits[1] = dits[0] + drb[i]; |
429 | dits[2] = dzb[i] / 2.; | |
430 | zpos = dzl[i] + dits[2]; | |
431 | gMC->Gsposp("IEL3", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
432 | gMC->Gsposp("IEL3", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
433 | } | |
89909db5 | 434 | for (i = 5; i < 6; i++) { |
435 | dits[0] = rl[i]+0.4235; | |
436 | dits[1] = dits[0] + drb[i]; | |
437 | dits[2] = dzb[i] / 2.; | |
438 | zpos = dzl[i] + dits[2]; | |
439 | gMC->Gsposp("IEL3", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
440 | gMC->Gsposp("IEL3", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
441 | } | |
146fb996 | 442 | |
6c251614 | 443 | // DEFINE THERMAL SCREEN FOR SPD |
33959f40 | 444 | |
6c251614 | 445 | pcits[0] = 8.3; |
446 | pcits[1] = 8.5; | |
447 | pcits[2] = 42.5; | |
448 | gMC->Gsvolu("ICY1", "TUBE", idtmed[274], pcits, 3); | |
449 | gMC->Gspos("ICY1", 1, "ITSD", 0., 0., 0., 0, "ONLY"); | |
33959f40 | 450 | |
33959f40 | 451 | // DEFINE END CONES FOR SDD |
452 | ||
4ebc1b6a | 453 | pcits[0] = (59.-42.5)/2.; |
454 | pcits[1] = 8.5; | |
89909db5 | 455 | pcits[2] = 8.5+0.1; |
4ebc1b6a | 456 | pcits[3] = 28.; |
89909db5 | 457 | pcits[4] = 28.+0.1; |
9cd18c59 | 458 | gMC->Gsvolu("ICO1", "CONE", idtmed[238], pcits, 5); |
146fb996 | 459 | AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.); |
4ebc1b6a | 460 | gMC->Gspos("ICO1", 1, "ITSD", 0., 0., 42.5+pcits[0], 0, "ONLY"); |
461 | gMC->Gspos("ICO1", 2, "ITSD", 0., 0., -(42.5+pcits[0]), idrotm[200], "ONLY"); | |
6c251614 | 462 | |
463 | // DEFINE CYLINDER BETWEEN SDD AND SSD | |
464 | ||
465 | pcits[0] = (59.5-0.13/2.)/2.; | |
466 | pcits[1] = (59.5+0.13/2.)/2.; | |
467 | pcits[2] = 57.; | |
faec2e21 | 468 | gMC->Gsvolu("ICY2", "TUBE", idtmed[274], pcits, 3); |
146fb996 | 469 | gMC->Gspos("ICY2", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 470 | |
471 | // DEFINE END CONES FOR SSD | |
472 | ||
4ebc1b6a | 473 | pcits[0] = (74.-59.)/2.; |
474 | pcits[1] = 28.; | |
89909db5 | 475 | pcits[2] = 28.+0.1; |
4ebc1b6a | 476 | pcits[3] = 47.; |
89909db5 | 477 | pcits[4] = 47.+0.1; |
9cd18c59 | 478 | gMC->Gsvolu("ICO2", "CONE", idtmed[264], pcits, 5); |
4ebc1b6a | 479 | gMC->Gspos("ICO2", 1, "ITSD", 0., 0., 59.+pcits[0], 0, "ONLY"); |
33959f40 | 480 | |
481 | // SERVICES | |
146fb996 | 482 | |
c54243df | 483 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART |
33959f40 | 484 | |
485 | dgh[0] = 45.; | |
e6892b92 | 486 | dgh[1] = 45.+1.0; |
e8031268 | 487 | dgh[2] = 9.5; |
33959f40 | 488 | |
e6892b92 | 489 | gMC->Gsvolu("ICCU", "TUBE", idtmed[279], dgh, 3); |
e8031268 | 490 | gMC->Gspos("ICCU", 1, "ITSV", 0., 0., 86.7, 0, "ONLY"); |
491 | gMC->Gspos("ICCU", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY"); | |
e6892b92 | 492 | |
c54243df | 493 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART |
e6892b92 | 494 | |
495 | dgh[0] = 45.+1.0; | |
496 | dgh[1] = 45.+1.0+1.5; | |
e8031268 | 497 | dgh[2] = 9.5; |
e6892b92 | 498 | |
499 | gMC->Gsvolu("ICCC", "TUBE", idtmed[274], dgh, 3); | |
e8031268 | 500 | gMC->Gspos("ICCC", 1, "ITSV", 0., 0., 86.7, 0, "ONLY"); |
501 | gMC->Gspos("ICCC", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY"); | |
33959f40 | 502 | |
c54243df | 503 | // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES |
33959f40 | 504 | |
505 | dgh[0] = 45.; | |
506 | dgh[1] = 56.; | |
507 | dgh[2] = 2.25; | |
508 | ||
e6892b92 | 509 | gMC->Gsvolu("IPAN", "TUBE", idtmed[285], dgh, 3); |
b16d3d87 | 510 | gMC->Gspos("IPAN", 1, "ITSV", 0., 0., 98.45, 0, "ONLY"); |
511 | gMC->Gspos("IPAN", 2, "ITSV", 0., 0., -98.45, idrotm[200], "ONLY"); | |
33959f40 | 512 | |
c54243df | 513 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART |
4ebc1b6a | 514 | // UPPER PART |
515 | ||
516 | dgh[0] = (xltpc-100.7)/2.; | |
517 | dgh[1] = 45.2; | |
518 | dgh[2] = 45.2+1.0; | |
519 | dgh[3] = 61.8; | |
520 | dgh[4] = 61.8+1.0; | |
521 | dgh[5] = 12.; | |
522 | dgh[6] = 168.; | |
523 | gMC->Gsvolu("ICU1", "CONS", idtmed[279], dgh, 7); | |
524 | gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY"); | |
33959f40 | 525 | |
4ebc1b6a | 526 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART |
527 | // LOWER PART | |
528 | ||
529 | dgh[0] = (xltpc-100.7)/2.; | |
530 | dgh[1] = 45.2; | |
531 | dgh[2] = 45.2+1.0; | |
532 | dgh[3] = 61.8; | |
533 | dgh[4] = 61.8+1.0; | |
534 | dgh[5] = 192.; | |
535 | dgh[6] = 348.; | |
536 | gMC->Gsvolu("ICU2", "CONS", idtmed[279], dgh, 7); | |
537 | gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY"); | |
538 | ||
539 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART | |
540 | // UPPER PART | |
541 | ||
542 | dgh[0] = (xltpc-100.7)/2.; | |
543 | dgh[1] = 45.2+1.0; | |
544 | dgh[2] = 45.2+1.0+1.5; | |
545 | dgh[3] = 61.8+1.0; | |
546 | dgh[4] = 61.8+1.0+1.5; | |
547 | dgh[5] = 12.; | |
548 | dgh[6] = 168.; | |
549 | gMC->Gsvolu("ICC1", "CONS", idtmed[274], dgh, 7); | |
550 | gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY"); | |
e6892b92 | 551 | |
c54243df | 552 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART |
4ebc1b6a | 553 | // LOWER PART |
554 | ||
555 | dgh[0] = (xltpc-100.7)/2.; | |
556 | dgh[1] = 45.2+1.0; | |
557 | dgh[2] = 45.2+1.0+1.5; | |
558 | dgh[3] = 61.8+1.0; | |
559 | dgh[4] = 61.8+1.0+1.5; | |
560 | dgh[5] = 192.; | |
561 | dgh[6] = 348.; | |
562 | gMC->Gsvolu("ICC2", "CONS", idtmed[274], dgh, 7); | |
563 | gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 100.7+dgh[0], 0, "ONLY"); | |
564 | ||
c54243df | 565 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART |
4ebc1b6a | 566 | // UPPER PART |
567 | ||
568 | dgh[0] = 62.5; | |
569 | dgh[1] = 74.5; | |
570 | dgh[2] = 0.5; | |
571 | dgh[3] = 12.; | |
572 | dgh[4] = 168.; | |
573 | gMC->Gsvolu("ICU3", "TUBS", idtmed[279], dgh, 5); | |
574 | gMC->Gspos("ICU3", 1, "ITSV", 0., 0., xltpc+1.5+dgh[2], 0, "ONLY"); | |
575 | ||
576 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART | |
577 | // LOWER PART | |
578 | ||
579 | dgh[0] = 62.5; | |
580 | dgh[1] = 74.5; | |
581 | dgh[2] = 0.5; | |
582 | dgh[3] = 192.; | |
583 | dgh[4] = 348.; | |
584 | gMC->Gsvolu("ICU4", "TUBS", idtmed[279], dgh, 5); | |
585 | gMC->Gspos("ICU4", 1, "ITSV", 0., 0., xltpc+1.5+dgh[2], 0, "ONLY"); | |
586 | ||
c54243df | 587 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART |
4ebc1b6a | 588 | // UPPER PART |
589 | ||
590 | dgh[0] = 62.5; | |
591 | dgh[1] = 74.5; | |
592 | dgh[2] = 0.75; | |
593 | dgh[3] = 12.; | |
594 | dgh[4] = 168.; | |
595 | gMC->Gsvolu("ICC3", "TUBS", idtmed[274], dgh, 5); | |
596 | gMC->Gspos("ICC3", 1, "ITSV", 0., 0., xltpc+dgh[2], 0, "ONLY"); | |
597 | ||
598 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART | |
599 | // LOWER PART | |
600 | ||
601 | dgh[0] = 62.5; | |
602 | dgh[1] = 74.5; | |
603 | dgh[2] = 0.75; | |
604 | dgh[3] = 192.; | |
605 | dgh[4] = 348.; | |
606 | gMC->Gsvolu("ICC4", "TUBS", idtmed[274], dgh, 5); | |
607 | gMC->Gspos("ICC4", 1, "ITSV", 0., 0., xltpc+dgh[2], 0, "ONLY"); | |
33959f40 | 608 | |
c54243df | 609 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
1a7aef02 | 610 | // THE ABSORBER - COPPER PART - UPPER PART |
33959f40 | 611 | |
612 | dgh[0] = 45.; | |
e6892b92 | 613 | dgh[1] = 45.+1.0; |
614 | dgh[2] = (xltpc-100.7+1.5)/2.; | |
1a7aef02 | 615 | dgh[3] = 12.; |
616 | dgh[4] = 168.; | |
617 | gMC->Gsvolu("ICU5", "TUBS", idtmed[279], dgh, 5); | |
4ebc1b6a | 618 | gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY"); |
e6892b92 | 619 | |
c54243df | 620 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
1a7aef02 | 621 | // THE ABSORBER - COPPER PART - LOWER PART |
622 | ||
623 | dgh[0] = 45.; | |
624 | dgh[1] = 45.+1.0; | |
625 | dgh[2] = (xltpc-100.7+1.5)/2.; | |
626 | dgh[3] = 192.; | |
627 | dgh[4] = 348.; | |
628 | gMC->Gsvolu("ICU6", "TUBS", idtmed[279], dgh, 5); | |
629 | gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY"); | |
630 | ||
631 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. | |
632 | // THE ABSORBER - CARBON PART - UPPER PART | |
633 | ||
634 | dgh[0] = 45.+1.0; | |
635 | dgh[1] = 45.+1.0+1.5; | |
636 | dgh[2] = (xltpc-100.7)/2.; | |
637 | dgh[3] = 12.; | |
638 | dgh[4] = 168.; | |
639 | gMC->Gsvolu("ICC5", "TUBS", idtmed[274], dgh, 5); | |
640 | gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY"); | |
641 | ||
642 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. | |
643 | // THE ABSORBER - CARBON PART - LOWER PART | |
e6892b92 | 644 | |
645 | dgh[0] = 45.+1.0; | |
646 | dgh[1] = 45.+1.0+1.5; | |
33959f40 | 647 | dgh[2] = (xltpc-100.7)/2.; |
1a7aef02 | 648 | dgh[3] = 192.; |
649 | dgh[4] = 348.; | |
650 | gMC->Gsvolu("ICC6", "TUBS", idtmed[274], dgh, 5); | |
651 | gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY"); | |
33959f40 | 652 | |
1a7aef02 | 653 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
654 | // COPPER PART - UPPER PART | |
655 | ||
656 | dgh[0] = 45.; | |
657 | dgh[1] = 74.5; | |
658 | dgh[2] = 0.5; | |
659 | dgh[3] = 12.; | |
660 | dgh[4] = 168.; | |
661 | gMC->Gsvolu("ICU7", "TUBS", idtmed[279], dgh, 5); | |
662 | gMC->Gspos("ICU7", 1, "ITSV", 0., 0., -(xltpc+1.5+dgh[2]), 0, "ONLY"); | |
33959f40 | 663 | |
c54243df | 664 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
1a7aef02 | 665 | // COPPER PART - LOWER PART |
4ebc1b6a | 666 | |
667 | dgh[0] = 45.; | |
668 | dgh[1] = 74.5; | |
669 | dgh[2] = 0.5; | |
1a7aef02 | 670 | dgh[3] = 192.; |
671 | dgh[4] = 348.; | |
672 | gMC->Gsvolu("ICU8", "TUBS", idtmed[279], dgh, 5); | |
673 | gMC->Gspos("ICU8", 1, "ITSV", 0., 0., -(xltpc+1.5+dgh[2]), 0, "ONLY"); | |
674 | ||
675 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER | |
676 | // CARBON PART - UPPER PART | |
33959f40 | 677 | |
1a7aef02 | 678 | dgh[0] = 45.+1.0; |
679 | dgh[1] = 74.5; | |
680 | dgh[2] = 0.75; | |
681 | dgh[3] = 12.; | |
682 | dgh[4] = 168.; | |
683 | gMC->Gsvolu("ICC7", "TUBS", idtmed[274], dgh, 5); | |
684 | gMC->Gspos("ICC7", 1, "ITSV", 0., 0., -(xltpc+dgh[2]), 0, "ONLY"); | |
e6892b92 | 685 | |
c54243df | 686 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
1a7aef02 | 687 | // CARBON PART - LOWER PART |
e6892b92 | 688 | |
4ebc1b6a | 689 | dgh[0] = 45.+1.0; |
690 | dgh[1] = 74.5; | |
691 | dgh[2] = 0.75; | |
1a7aef02 | 692 | dgh[3] = 192.; |
693 | dgh[4] = 348.; | |
694 | gMC->Gsvolu("ICC8", "TUBS", idtmed[274], dgh, 5); | |
695 | gMC->Gspos("ICC8", 1, "ITSV", 0., 0., -(xltpc+dgh[2]), 0, "ONLY"); | |
33959f40 | 696 | |
1a7aef02 | 697 | // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART |
698 | ||
699 | dgh[0] = 74.5; | |
700 | dgh[1] = 79.5; | |
701 | dgh[2] = 2.5; | |
702 | dgh[3] = 12.; | |
703 | dgh[4] = 168.; | |
704 | gMC->Gsvolu("IHK1", "TUBS", idtmed[284], dgh, 5); | |
705 | gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY"); | |
706 | ||
707 | // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART | |
33959f40 | 708 | |
709 | dgh[0] = 74.5; | |
710 | dgh[1] = 79.5; | |
711 | dgh[2] = 2.5; | |
1a7aef02 | 712 | dgh[3] = 192.; |
713 | dgh[4] = 348.; | |
714 | gMC->Gsvolu("IHK2", "TUBS", idtmed[284], dgh, 5); | |
715 | gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY"); | |
33959f40 | 716 | |
c54243df | 717 | // --- DEFINE RAILS BETWEEN THE ITS AND THE TPC |
718 | ||
89909db5 | 719 | //dgh[0] = 0.85; |
720 | //dgh[1] = 10.; | |
721 | //dgh[2] = 190.; | |
722 | //gMC->Gsvolu("IRAI", "BOX ", idtmed[285], dgh, 3); | |
723 | //gMC->Gspos("IRAI", 1, "ITSV", 53., 0., -69.5, 0, "ONLY"); | |
724 | //gMC->Gspos("IRAI", 2, "ITSV", -53., 0., -69.5, 0, "ONLY"); | |
c54243df | 725 | |
4ebc1b6a | 726 | // --- DEFINE CYLINDERS HOLDING RAILS BETWEEN THE ITS AND THE TPC |
727 | ||
4ebc1b6a | 728 | dgh[0] = 58.; |
729 | dgh[1] = 59.; | |
89909db5 | 730 | dgh[2] = 0.6; |
4ebc1b6a | 731 | gMC->Gsvolu("ICYL", "TUBE", idtmed[285], dgh, 3); |
89909db5 | 732 | gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74., 0, "ONLY"); |
733 | gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74., idrotm[200], "ONLY"); | |
33959f40 | 734 | |
735 | // --- Outputs the geometry tree in the EUCLID/CAD format | |
736 | ||
737 | if (fEuclidOut) { | |
738 | gMC->WriteEuclid("ITSgeometry", "ITSV", 1, 5); | |
739 | } | |
740 | } | |
741 | //_____________________________________________________________________________ | |
742 | void AliITSvPPRcoarseasymm::CreateMaterials(){ | |
743 | //////////////////////////////////////////////////////////////////////// | |
744 | // | |
745 | // Create ITS materials | |
746 | // This function defines the default materials used in the Geant | |
747 | // Monte Carlo simulations for the geometries AliITSv1, AliITSv3, | |
748 | // AliITSvPPRcoarseasymm. | |
749 | // In general it is automatically replaced by | |
750 | // the CreatMaterials routine defined in AliITSv?. Should the function | |
751 | // CreateMaterials not exist for the geometry version you are using this | |
752 | // one is used. See the definition found in AliITSv5 or the other routine | |
753 | // for a complete definition. | |
754 | // | |
755 | // Water H2O | |
756 | Float_t awat[2] = { 1.00794,15.9994 }; | |
757 | Float_t zwat[2] = { 1.,8. }; | |
758 | Float_t wwat[2] = { 2.,1. }; | |
759 | Float_t denswat = 1.; | |
760 | // Freon | |
761 | Float_t afre[2] = { 12.011,18.9984032 }; | |
762 | Float_t zfre[2] = { 6.,9. }; | |
763 | Float_t wfre[2] = { 5.,12. }; | |
764 | Float_t densfre = 1.5; | |
765 | // Ceramics | |
766 | // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3 | |
767 | Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 }; | |
768 | Float_t zcer[5] = { 13.,8.,14.,25., 24. }; | |
769 | Float_t wcer[5] = { .49976,1.01233,.01307, .01782,.00342 }; | |
770 | Float_t denscer = 3.6; | |
771 | // | |
772 | // 60% SiO2 , 40% G10FR4 | |
773 | // PC board | |
774 | Float_t apcb[3] = { 28.0855,15.9994,17.749 }; | |
775 | Float_t zpcb[3] = { 14.,8.,8.875 }; | |
776 | Float_t wpcb[3] = { .28,.32,.4 }; | |
777 | Float_t denspcb = 1.8; | |
778 | // POLYETHYL | |
779 | Float_t apoly[2] = { 12.01,1. }; | |
780 | Float_t zpoly[2] = { 6.,1. }; | |
781 | Float_t wpoly[2] = { .33,.67 }; | |
d12d92a5 | 782 | // old SERVICES |
33959f40 | 783 | Float_t zserv[4] = { 1.,6.,26.,29. }; |
784 | Float_t aserv[4] = { 1.,12.,55.8,63.5 }; | |
785 | Float_t wserv[4] = { .014,.086,.42,.48 }; | |
d12d92a5 | 786 | // Stainless steel |
787 | Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 }; | |
788 | Float_t zsteel[4] = { 26.,24.,28.,14. }; | |
789 | Float_t wsteel[4] = { .715,.18,.1,.005 }; | |
790 | ||
33959f40 | 791 | |
792 | Int_t isxfld = gAlice->Field()->Integ(); | |
793 | Float_t sxmgmx = gAlice->Field()->Max(); | |
794 | ||
795 | ||
796 | // --- Define the various materials for GEANT --- | |
797 | ||
798 | // 200-224 --> Silicon Pixel Detectors (detectors, chips, buses, cooling,..) | |
799 | ||
800 | AliMaterial(0, "SPD Si$", 28.0855, 14., 2.33, 9.36, 999); | |
801 | AliMaterial(1, "SPD Si chip$", 28.0855, 14., 2.33, 9.36, 999); | |
802 | AliMaterial(2, "SPD Si bus$", 28.0855, 14., 2.33, 9.36, 999); | |
803 | AliMaterial(3, "SPD C$", 12.011, 6., 2.265,18.8, 999); | |
804 | // v. dens | |
805 | AliMaterial(4, "SPD Air$", 14.61, 7.3, .001205, 30423., 999); | |
806 | AliMaterial(5, "SPD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
807 | AliMaterial(6, "SPD Al$", 26.981539, 13., 2.6989, 8.9, 999); | |
808 | AliMixture( 7, "SPD Water $", awat, zwat, denswat, -2, wwat); | |
809 | AliMixture( 8, "SPD Freon$", afre, zfre, densfre, -2, wfre); | |
6c251614 | 810 | AliMaterial(9, "SPD End ladder$", 55.845, 26., 7.87/10., 1.76*10., 999); |
89909db5 | 811 | //AliMaterial(9, "SPD End ladder$", 55.845, 26., -7.87/10., -1.76*10., 999); |
d12d92a5 | 812 | AliMaterial(10, "SPD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!! |
33959f40 | 813 | // ** |
faec2e21 | 814 | AliMedium(0, "SPD Si$", 0, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
815 | AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
816 | AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
817 | AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
818 | AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
819 | AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00); | |
820 | AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
821 | AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
822 | AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
823 | AliMedium(9, "SPD End ladder$",9, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
824 | AliMedium(10, "SPD cone$", 10, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
33959f40 | 825 | |
826 | // 225-249 --> Silicon Drift Detectors (detectors, chips, buses, cooling,..) | |
827 | ||
828 | AliMaterial(25, "SDD Si$", 28.0855, 14., 2.33, 9.36, 999); | |
829 | AliMaterial(26, "SDD Si chip$", 28.0855, 14., 2.33, 9.36, 999); | |
830 | AliMaterial(27, "SDD Si bus$", 28.0855, 14., 2.33, 9.36, 999); | |
831 | AliMaterial(28, "SDD C$", 12.011, 6., 2.265,18.8, 999); | |
832 | // v. dens | |
833 | AliMaterial(29, "SDD Air$", 14.61, 7.3, .001205, 30423., 999); | |
834 | AliMaterial(30, "SDD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
835 | AliMaterial(31, "SDD Al$", 26.981539, 13., 2.6989, 8.9, 999); | |
836 | // After a call with ratios by number (negative number of elements), | |
837 | // the ratio array is changed to the ratio by weight, so all successive | |
838 | // calls with the same array must specify the number of elements as | |
839 | // positive | |
840 | AliMixture(32, "SDD Water $", awat, zwat, denswat, 2, wwat); | |
841 | // After a call with ratios by number (negative number of elements), | |
842 | // the ratio array is changed to the ratio by weight, so all successive | |
843 | // calls with the same array must specify the number of elements as | |
844 | // positive | |
845 | AliMixture( 33, "SDD Freon$", afre, zfre, densfre, 2, wfre); | |
846 | AliMixture( 34, "SDD PCB$", apcb, zpcb, denspcb, 3, wpcb); | |
847 | AliMaterial(35, "SDD Copper$", 63.546, 29., 8.96, 1.43, 999); | |
848 | AliMixture( 36, "SDD Ceramics$", acer, zcer, denscer, -5, wcer); | |
849 | AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999); | |
89909db5 | 850 | AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999); |
851 | AliMaterial(39, "SDD cone$",63.546, 29., 1.15, 1.265, 999); | |
852 | //AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, -0.3824, -36.5103, 999); | |
853 | //AliMaterial(39, "SDD cone$",63.546, 29., -1.15, -1.265, 999); | |
854 | ||
33959f40 | 855 | // ** |
856 | // check A and Z | |
faec2e21 | 857 | AliMedium(25, "SDD Si$", 25, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
858 | AliMedium(26, "SDD Si chip$", 26, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
859 | AliMedium(27, "SDD Si bus$", 27, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
860 | AliMedium(28, "SDD C$", 28, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
861 | AliMedium(29, "SDD Air$", 29, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
862 | AliMedium(30, "SDD Vacuum$", 30, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00); | |
863 | AliMedium(31, "SDD Al$", 31, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
864 | AliMedium(32, "SDD Water $", 32, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
865 | AliMedium(33, "SDD Freon$", 33, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
866 | AliMedium(34, "SDD PCB$", 34, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
867 | AliMedium(35, "SDD Copper$", 35, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
868 | AliMedium(36, "SDD Ceramics$", 36, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
869 | AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
870 | AliMedium(38, "SDD End ladder$",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
871 | AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
33959f40 | 872 | |
873 | // 250-274 --> Silicon Strip Detectors (detectors, chips, buses, cooling,..) | |
874 | ||
875 | AliMaterial(50, "SSD Si$", 28.0855, 14., 2.33, 9.36, 999.); | |
876 | AliMaterial(51, "SSD Si chip$", 28.0855, 14., 2.33, 9.36, 999.); | |
877 | AliMaterial(52, "SSD Si bus$", 28.0855, 14., 2.33, 9.36, 999.); | |
878 | AliMaterial(53, "SSD C$", 12.011, 6., 2.265,18.8, 999.); | |
879 | // v. dens | |
880 | AliMaterial(54, "SSD Air$", 14.61, 7.3, .001205, 30423., 999); | |
881 | AliMaterial(55, "SSD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
882 | AliMaterial(56, "SSD Al$", 26.981539, 13., 2.6989, 8.9, 999); | |
883 | // After a call with ratios by number (negative number of elements), | |
884 | // the ratio array is changed to the ratio by weight, so all successive | |
885 | // calls with the same array must specify the number of elements as | |
886 | // positive | |
887 | AliMixture(57, "SSD Water $", awat, zwat, denswat, 2, wwat); | |
888 | // After a call with ratios by number (negative number of elements), | |
889 | // the ratio array is changed to the ratio by weight, so all successive | |
890 | // calls with the same array must specify the number of elements as | |
891 | // positive | |
892 | AliMixture(58, "SSD Freon$", afre, zfre, densfre, 2, wfre); | |
893 | AliMixture(59, "SSD PCB$", apcb, zpcb, denspcb, 3, wpcb); | |
894 | AliMaterial(60, "SSD Copper$", 63.546, 29., 8.96, 1.43, 999.); | |
895 | // After a call with ratios by number (negative number of elements), | |
896 | // the ratio array is changed to the ratio by weight, so all successive | |
897 | // calls with the same array must specify the number of elements as | |
898 | // positive | |
899 | AliMixture( 61, "SSD Ceramics$", acer, zcer, denscer, 5, wcer); | |
900 | AliMaterial(62, "SSD Kapton$", 12.011, 6., 1.3, 31.27, 999.); | |
901 | // check A and Z | |
d12d92a5 | 902 | AliMaterial(63, "SSD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.); |
89909db5 | 903 | AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999); |
904 | AliMaterial(65, "SSD cone$",63.546, 29., 1.15, 1.265, 999); | |
905 | //AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, -0.68, -35.3238, 999); | |
906 | //AliMaterial(65, "SSD cone$",63.546, 29., -1.15, -1.265, 999); | |
33959f40 | 907 | // ** |
faec2e21 | 908 | AliMedium(50, "SSD Si$", 50, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
909 | AliMedium(51, "SSD Si chip$", 51, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
910 | AliMedium(52, "SSD Si bus$", 52, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
911 | AliMedium(53, "SSD C$", 53, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
912 | AliMedium(54, "SSD Air$", 54, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
913 | AliMedium(55, "SSD Vacuum$", 55, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00); | |
914 | AliMedium(56, "SSD Al$", 56, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
915 | AliMedium(57, "SSD Water $", 57, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
916 | AliMedium(58, "SSD Freon$", 58, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
917 | AliMedium(59, "SSD PCB$", 59, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
918 | AliMedium(60, "SSD Copper$", 60, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
919 | AliMedium(61, "SSD Ceramics$", 61, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
920 | AliMedium(62, "SSD Kapton$", 62, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
921 | AliMedium(63, "SSD G10FR4$", 63, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
922 | AliMedium(64, "SSD End ladder$",64, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
923 | AliMedium(65, "SSD cone$", 65, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
924 | ||
33959f40 | 925 | // 275-299 --> General (end-caps, frames, cooling, cables, etc.) |
926 | ||
927 | AliMaterial(75, "GEN C$", 12.011, 6., 2.265, 18.8, 999.); | |
928 | // verify density | |
929 | AliMaterial(76, "GEN Air$", 14.61, 7.3, .001205, 30423., 999); | |
930 | AliMaterial(77, "GEN Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
931 | AliMixture( 78, "GEN POLYETHYL$", apoly, zpoly, .95, -2, wpoly); | |
932 | AliMixture( 79, "GEN SERVICES$", aserv, zserv, 4.68, 4, wserv); | |
933 | AliMaterial(80, "GEN Copper$", 63.546, 29., 8.96, 1.43, 999.); | |
934 | // After a call with ratios by number (negative number of elements), | |
935 | // the ratio array is changed to the ratio by weight, so all successive | |
936 | // calls with the same array must specify the number of elements as | |
937 | // positive | |
938 | AliMixture(81, "GEN Water $", awat, zwat, denswat, 2, wwat); | |
e6892b92 | 939 | // AliMaterial(82, "GEN Cables$", 12.011, 6., 2.265, 18.8, 999.); // check !!! |
940 | // AliMaterial(83, "GEN patch pan$", 12.011, 6., 2.265, 18.8, 999.); // check !!! | |
941 | // AliMaterial(84, "GEN serv$", 12.011, 6., 2.265, 18.8, 999.); // check !!! | |
d12d92a5 | 942 | AliMixture(85, "GEN Inox$", asteel, zsteel, 7.88, 4, wsteel); |
e6892b92 | 943 | AliMaterial(86, "GEN Al$", 26.981539, 13., 2.6989, 8.9, 999); |
33959f40 | 944 | // ** |
945 | AliMedium(75,"GEN C$", 75, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
946 | AliMedium(76,"GEN Air$", 76, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
947 | AliMedium(77,"GEN Vacuum$", 77, 0,isxfld,sxmgmx, 10., .10, .1, .100,10.00); | |
948 | AliMedium(78,"GEN POLYETHYL$",78, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
949 | AliMedium(79,"GEN SERVICES$", 79, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
950 | AliMedium(80,"GEN Copper$", 80, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
951 | AliMedium(81,"GEN Water $", 81, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
e6892b92 | 952 | // AliMedium(82,"GEN Cables$", 82, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
953 | // AliMedium(83,"GEN patch pan$",83, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
954 | // AliMedium(84,"GEN serv$", 84, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
d12d92a5 | 955 | AliMedium(85,"GEN Inox$", 85, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
e6892b92 | 956 | AliMedium(86, "GEN Al$", 86, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
33959f40 | 957 | } |
958 | //_____________________________________________________________________________ | |
959 | void AliITSvPPRcoarseasymm::Init(){ | |
960 | //////////////////////////////////////////////////////////////////////// | |
961 | // Initialise the ITS after it has been created. | |
962 | //////////////////////////////////////////////////////////////////////// | |
bae7e562 | 963 | Int_t i; |
33959f40 | 964 | |
bae7e562 | 965 | cout << endl; |
966 | for(i=0;i<24;i++) cout << "*";cout << " ITSvPPRcoarseasymm_Init "; | |
967 | for(i=0;i<25;i++) cout << "*";cout << endl; | |
968 | // | |
33959f40 | 969 | AliITS::Init(); |
bae7e562 | 970 | // |
971 | for(i=0;i<72;i++) cout << "*"; | |
972 | cout << endl; | |
33959f40 | 973 | } |
974 | ||
975 | //_____________________________________________________________________________ | |
976 | void AliITSvPPRcoarseasymm::DrawModule(){ | |
977 | //////////////////////////////////////////////////////////////////////// | |
978 | // Draw a shaded view of the FMD version 6. | |
979 | //////////////////////////////////////////////////////////////////////// | |
980 | ||
981 | // Set everything unseen | |
982 | gMC->Gsatt("*", "seen", -1); | |
983 | // | |
984 | // Set ALIC mother visible | |
985 | gMC->Gsatt("ALIC","SEEN",0); | |
986 | // | |
987 | // Set the volumes visible | |
988 | gMC->Gsatt("ITSD","SEEN",0); | |
989 | gMC->Gsatt("ITS1","SEEN",1); | |
990 | gMC->Gsatt("ITS2","SEEN",1); | |
991 | gMC->Gsatt("ITS3","SEEN",1); | |
992 | gMC->Gsatt("ITS4","SEEN",1); | |
993 | gMC->Gsatt("ITS5","SEEN",1); | |
994 | gMC->Gsatt("ITS6","SEEN",1); | |
995 | ||
996 | gMC->Gsatt("IPCB","SEEN",1); | |
997 | gMC->Gsatt("ICO2","SEEN",1); | |
998 | gMC->Gsatt("ICER","SEEN",0); | |
999 | gMC->Gsatt("ISI2","SEEN",0); | |
1000 | gMC->Gsatt("IPLA","SEEN",0); | |
1001 | gMC->Gsatt("ICO3","SEEN",0); | |
1002 | gMC->Gsatt("IEPX","SEEN",0); | |
1003 | gMC->Gsatt("ISI3","SEEN",1); | |
1004 | gMC->Gsatt("ISUP","SEEN",0); | |
1005 | gMC->Gsatt("ICHO","SEEN",0); | |
1006 | gMC->Gsatt("ICMO","SEEN",0); | |
1007 | gMC->Gsatt("ICMD","SEEN",0); | |
1008 | gMC->Gsatt("ICCO","SEEN",1); | |
1009 | gMC->Gsatt("ICCM","SEEN",0); | |
1010 | gMC->Gsatt("ITMD","SEEN",0); | |
1011 | gMC->Gsatt("ITTT","SEEN",1); | |
1012 | ||
1013 | // | |
1014 | gMC->Gdopt("hide", "on"); | |
1015 | gMC->Gdopt("shad", "on"); | |
1016 | gMC->Gsatt("*", "fill", 7); | |
1017 | gMC->SetClipBox("."); | |
1018 | gMC->SetClipBox("*", 0, 300, -300, 300, -300, 300); | |
1019 | gMC->DefaultRange(); | |
1020 | gMC->Gdraw("alic", 40, 30, 0, 11, 10, .07, .07); | |
1021 | gMC->Gdhead(1111, "Inner Tracking System Version 1"); | |
1022 | gMC->Gdman(17, 6, "MAN"); | |
1023 | } | |
1024 | //_____________________________________________________________________________ | |
1025 | void AliITSvPPRcoarseasymm::StepManager(){ | |
1026 | //////////////////////////////////////////////////////////////////////// | |
1027 | // Called for every step in the ITS, then calls the AliITShit class | |
1028 | // creator with the information to be recoreded about that hit. | |
1029 | //////////////////////////////////////////////////////////////////////// | |
b16d3d87 | 1030 | |
1031 | /* | |
33959f40 | 1032 | Int_t copy, id; |
1033 | Float_t hits[8]; | |
1034 | Int_t vol[4]; | |
1035 | TLorentzVector position, momentum; | |
1036 | // TClonesArray &lhits = *fHits; | |
1037 | // | |
1038 | // no hits for this coarse asymmetric version. | |
1039 | // | |
1040 | ||
1041 | // | |
1042 | // Track status | |
1043 | vol[3] = 0; | |
1044 | if(gMC->IsTrackInside()) vol[3] += 1; | |
1045 | if(gMC->IsTrackEntering()) vol[3] += 2; | |
1046 | if(gMC->IsTrackExiting()) vol[3] += 4; | |
1047 | if(gMC->IsTrackOut()) vol[3] += 8; | |
1048 | if(gMC->IsTrackDisappeared()) vol[3] += 16; | |
1049 | if(gMC->IsTrackStop()) vol[3] += 32; | |
1050 | if(gMC->IsTrackAlive()) vol[3] += 64; | |
1051 | // | |
1052 | // Fill hit structure. | |
1053 | if( !(gMC->TrackCharge()) ) return; | |
1054 | // | |
1055 | // Only entering charged tracks | |
1056 | if((id=gMC->CurrentVolID(copy))==fIdSens[0]) { | |
1057 | vol[0]=1; | |
1058 | id=gMC->CurrentVolOffID(1,copy); | |
1059 | vol[1]=copy; | |
1060 | id=gMC->CurrentVolOffID(2,copy); | |
1061 | vol[2]=copy; | |
1062 | } else if(id==fIdSens[1]) { | |
1063 | vol[0]=2; | |
1064 | id=gMC->CurrentVolOffID(1,copy); | |
1065 | vol[1]=copy; | |
1066 | id=gMC->CurrentVolOffID(2,copy); | |
1067 | vol[2]=copy; | |
1068 | } else if(id==fIdSens[2]) { | |
1069 | vol[0]=3; | |
1070 | vol[1]=copy; | |
1071 | id=gMC->CurrentVolOffID(1,copy); | |
1072 | vol[2]=copy; | |
1073 | } else if(id==fIdSens[3]) { | |
1074 | vol[0]=4; | |
1075 | vol[1]=copy; | |
1076 | id=gMC->CurrentVolOffID(1,copy); | |
1077 | vol[2]=copy; | |
1078 | } else if(id==fIdSens[4]) { | |
1079 | vol[0]=5; | |
1080 | vol[1]=copy; | |
1081 | id=gMC->CurrentVolOffID(1,copy); | |
1082 | vol[2]=copy; | |
1083 | } else if(id==fIdSens[5]) { | |
1084 | vol[0]=6; | |
1085 | vol[1]=copy; | |
1086 | id=gMC->CurrentVolOffID(1,copy); | |
1087 | vol[2]=copy; | |
1088 | } else return; | |
1089 | gMC->TrackPosition(position); | |
1090 | gMC->TrackMomentum(momentum); | |
1091 | hits[0]=position[0]; | |
1092 | hits[1]=position[1]; | |
1093 | hits[2]=position[2]; | |
1094 | hits[3]=momentum[0]; | |
1095 | hits[4]=momentum[1]; | |
1096 | hits[5]=momentum[2]; | |
1097 | hits[6]=gMC->Edep(); | |
1098 | hits[7]=gMC->TrackTime(); | |
1099 | // new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->CurrentTrack(),vol,hits); | |
1100 | // | |
1101 | // no hits for this coarse asymmetric version. | |
1102 | // | |
b16d3d87 | 1103 | */ |
33959f40 | 1104 | } |
33959f40 | 1105 |