]>
Commit | Line | Data |
---|---|---|
33959f40 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
e8031268 | 18 | Revision 1.5 2000/10/16 13:49:15 barbera |
19 | Services volumes slightly modified and material added following Pierluigi Barberis' information | |
20 | ||
e6892b92 | 21 | Revision 1.4 2000/10/07 15:33:07 barbera |
22 | Small corrections to the ITSV mother volume | |
23 | ||
990d421f | 24 | Revision 1.3 2000/10/07 13:06:50 barbera |
25 | Some new materials and media defined | |
26 | ||
d12d92a5 | 27 | Revision 1.2 2000/10/07 10:58:15 barbera |
28 | Mother volume ITSV corrected | |
29 | ||
b16d3d87 | 30 | Revision 1.1 2000/10/06 23:09:24 barbera |
31 | New coarse geometry (asymmetric services | |
32 | ||
33959f40 | 33 | Revision 1.20 2000/10/02 21:28:08 fca |
34 | Removal of useless dependecies via forward declarations | |
35 | ||
36 | Revision 1.19 2000/07/10 16:07:19 fca | |
37 | Release version of ITS code | |
38 | ||
39 | Revision 1.14.2.2 2000/05/19 10:09:21 nilsen | |
40 | fix for bug with HP and Sun unix + fix for event display in ITS-working branch | |
41 | ||
42 | Revision 1.14.2.1 2000/03/04 23:45:19 nilsen | |
43 | Fixed up the comments/documentation. | |
44 | ||
45 | Revision 1.14 1999/11/25 06:52:56 fca | |
46 | Correct value of drca | |
47 | ||
48 | Revision 1.13.2.1 1999/11/25 06:52:21 fca | |
49 | Correct value of drca | |
50 | ||
51 | Revision 1.13 1999/10/27 11:16:26 fca | |
52 | Correction of problem in geometry | |
53 | ||
54 | Revision 1.12 1999/10/22 08:25:25 fca | |
55 | remove double definition of destructors | |
56 | ||
57 | Revision 1.11 1999/10/22 08:16:49 fca | |
58 | Correct destructors, thanks to I.Hrivnacova | |
59 | ||
60 | Revision 1.10 1999/10/06 19:56:50 fca | |
61 | Add destructor | |
62 | ||
63 | Revision 1.9 1999/10/05 08:05:09 fca | |
64 | Minor corrections for uninitialised variables. | |
65 | ||
66 | Revision 1.8 1999/09/29 09:24:20 fca | |
67 | Introduction of the Copyright and cvs Log | |
68 | ||
69 | */ | |
70 | ||
71 | /////////////////////////////////////////////////////////////////////////////// | |
72 | // // | |
73 | // Inner Traking System version PPR coarse asymmetric // | |
74 | // This class contains the base procedures for the Inner Tracking System // | |
75 | // // | |
76 | // Authors: R. Barbera | |
77 | // version 6. | |
78 | // Created 2000. | |
79 | // | |
80 | // NOTE: THIS IS THE COARSE ASYMMETRIC PPR geometry of the ITS. | |
81 | // THIS WILL NOT WORK | |
82 | // with the geometry or module classes or any analysis classes. You are | |
83 | // strongly encouraged to uses AliITSv5. | |
84 | // // | |
85 | /////////////////////////////////////////////////////////////////////////////// | |
86 | ||
87 | #include <TMath.h> | |
88 | #include <TRandom.h> | |
89 | #include <TVector.h> | |
90 | #include <TGeometry.h> | |
91 | #include <TNode.h> | |
92 | #include <TTUBE.h> | |
93 | #include <TFile.h> // only required for Tracking function? | |
94 | #include <TCanvas.h> | |
95 | #include <TObjArray.h> | |
96 | #include <TClonesArray.h> | |
97 | ||
98 | ||
99 | #include "AliMC.h" | |
100 | #include "AliMagF.h" | |
101 | #include "AliConst.h" | |
102 | ||
103 | #include "AliITShit.h" | |
104 | #include "AliITSvPPRcoarseasymm.h" | |
105 | #include "AliRun.h" | |
106 | ||
107 | ||
108 | ClassImp(AliITSvPPRcoarseasymm) | |
109 | ||
110 | //_____________________________________________________________________________ | |
111 | AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm() { | |
112 | //////////////////////////////////////////////////////////////////////// | |
113 | // Standard default constructor for the ITS version 6. | |
114 | //////////////////////////////////////////////////////////////////////// | |
115 | ||
116 | fIdN = 6; | |
117 | fIdName = new TString[fIdN]; | |
118 | fIdName[0] = "ITS1"; | |
119 | fIdName[1] = "ITS2"; | |
120 | fIdName[2] = "ITS3"; | |
121 | fIdName[3] = "ITS4"; | |
122 | fIdName[4] = "ITS5"; | |
123 | fIdName[5] = "ITS6"; | |
124 | fIdSens = new Int_t[fIdN]; | |
125 | for (Int_t i=0;i<fIdN;i++) fIdSens[i]=fIdName[i].Length(); | |
126 | } | |
127 | //_____________________________________________________________________________ | |
128 | AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm(const char *name, const char *title) : AliITS(name, title){ | |
129 | //////////////////////////////////////////////////////////////////////// | |
130 | // Standard constructor for the ITS version 6. | |
131 | //////////////////////////////////////////////////////////////////////// | |
132 | ||
133 | fIdN = 6; | |
134 | fIdName = new TString[fIdN]; | |
135 | fIdName[0] = "ITS1"; | |
136 | fIdName[1] = "ITS2"; | |
137 | fIdName[2] = "ITS3"; | |
138 | fIdName[3] = "ITS4"; | |
139 | fIdName[4] = "ITS5"; | |
140 | fIdName[5] = "ITS6"; | |
141 | fIdSens = new Int_t[fIdN]; | |
142 | for (Int_t i=0;i<fIdN;i++) fIdSens[i]=fIdName[i].Length(); | |
143 | ||
144 | } | |
145 | //____________________________________________________________________________ | |
146 | AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm(const AliITSvPPRcoarseasymm &source){ | |
147 | //////////////////////////////////////////////////////////////////////// | |
148 | // Copy Constructor for ITS version 6. | |
149 | //////////////////////////////////////////////////////////////////////// | |
150 | if(&source == this) return; | |
151 | printf("Not allowed to copy AliITSvPPRcoarseasymm\n"); | |
152 | return; | |
153 | } | |
154 | //_____________________________________________________________________________ | |
155 | AliITSvPPRcoarseasymm& AliITSvPPRcoarseasymm::operator=(const AliITSvPPRcoarseasymm &source){ | |
156 | //////////////////////////////////////////////////////////////////////// | |
157 | // Assignment operator for the ITS version 6. | |
158 | //////////////////////////////////////////////////////////////////////// | |
159 | if(&source == this) return *this; | |
160 | printf("Not allowed to copy AliITSvPPRcoarseasymm\n"); | |
161 | return *this; | |
162 | } | |
163 | //_____________________________________________________________________________ | |
164 | AliITSvPPRcoarseasymm::~AliITSvPPRcoarseasymm() { | |
165 | //////////////////////////////////////////////////////////////////////// | |
166 | // Standard destructor for the ITS version 6. | |
167 | //////////////////////////////////////////////////////////////////////// | |
168 | } | |
169 | ||
170 | //__________________________________________________________________________ | |
171 | void AliITSvPPRcoarseasymm::BuildGeometry(){ | |
172 | //////////////////////////////////////////////////////////////////////// | |
173 | // Geometry builder for the ITS version 6. | |
174 | //////////////////////////////////////////////////////////////////////// | |
175 | TNode *node, *top; | |
176 | const int kColorITS=kYellow; | |
177 | // | |
178 | top = gAlice->GetGeometry()->GetNode("alice"); | |
179 | ||
180 | new TTUBE("S_layer1","Layer1 of ITS","void",3.95,3.95+0.05475,12.25); | |
181 | top->cd(); | |
182 | node = new TNode("Layer1","Layer1","S_layer1",0,0,0,""); | |
183 | node->SetLineColor(kColorITS); | |
184 | fNodes->Add(node); | |
185 | ||
186 | new TTUBE("S_layer2","Layer2 of ITS","void",7.,7.+0.05475,16.3); | |
187 | top->cd(); | |
188 | node = new TNode("Layer2","Layer2","S_layer2",0,0,0,""); | |
189 | node->SetLineColor(kColorITS); | |
190 | fNodes->Add(node); | |
191 | ||
192 | new TTUBE("S_layer3","Layer3 of ITS","void",15.,15.+0.05288,21.1); | |
193 | top->cd(); | |
194 | node = new TNode("Layer3","Layer3","S_layer3",0,0,0,""); | |
195 | node->SetLineColor(kColorITS); | |
196 | fNodes->Add(node); | |
197 | ||
198 | new TTUBE("S_layer4","Layer4 of ITS","void",24,24+0.05288,29.6); | |
199 | top->cd(); | |
200 | node = new TNode("Layer4","Layer4","S_layer4",0,0,0,""); | |
201 | node->SetLineColor(kColorITS); | |
202 | fNodes->Add(node); | |
203 | ||
204 | new TTUBE("S_layer5","Layer5 of ITS","void",40,40+0.05382,45.1); | |
205 | top->cd(); | |
206 | node = new TNode("Layer5","Layer5","S_layer5",0,0,0,""); | |
207 | node->SetLineColor(kColorITS); | |
208 | fNodes->Add(node); | |
209 | ||
210 | new TTUBE("S_layer6","Layer6 of ITS","void",45,45+0.05382,50.4); | |
211 | top->cd(); | |
212 | node = new TNode("Layer6","Layer6","S_layer6",0,0,0,""); | |
213 | node->SetLineColor(kColorITS); | |
214 | fNodes->Add(node); | |
215 | } | |
216 | //_____________________________________________________________________________ | |
217 | void AliITSvPPRcoarseasymm::CreateGeometry(){ | |
218 | //////////////////////////////////////////////////////////////////////// | |
219 | // This routine defines and Creates the geometry for version 6 of the ITS. | |
220 | //////////////////////////////////////////////////////////////////////// | |
221 | ||
222 | //INNER RADII OF THE SILICON LAYERS | |
223 | Float_t rl[6] = { 3.95,7.,15.,24.,38.1,43.5765 }; | |
224 | //THICKNESSES OF LAYERS (in % radiation length) | |
225 | Float_t drl[6] = { 1.03,1.03+0.36,0.34+0.94,0.95,0.34+0.91,0.87 }; | |
226 | //HALF LENGTHS OF LAYERS | |
227 | Float_t dzl[6] = { 14.344,14.344,25.1,32.1,49.405,55.27 }; | |
228 | //LENGTHS OF END-LADDER BOXES (ALL INCLUDED) | |
229 | Float_t dzb[6] = { 17.,17.,15.,17.,12.,11. }; // check !! | |
230 | //THICKNESSES OF END-LADDER BOXES (ALL INCLUDED) | |
231 | Float_t drb[6] = { 1.5,1.5,5.,5.,3.,3. }; // check spd and ssd !! !! | |
232 | ||
233 | ||
234 | Float_t dits[3], rlim, zmax; | |
235 | Float_t zpos; | |
236 | Float_t pcits[15], xltpc; | |
237 | Int_t idrotm[399], i; | |
238 | Float_t dgh[50]; | |
239 | ||
240 | Int_t *idtmed = fIdtmed->GetArray()-199; | |
241 | ||
242 | // CONVERT INTO CM (RL(SI)=9.36 CM) | |
243 | for (i = 0; i < 6; ++i) { | |
244 | drl[i] = drl[i] / 100. * 9.36; | |
245 | } | |
246 | ||
247 | // FIELD CAGE HALF LENGTH | |
248 | ||
249 | rlim = 56.; | |
250 | zmax = 76.708; | |
251 | xltpc = 284.; | |
252 | ||
b16d3d87 | 253 | // --- Define ghost volume containing the whole ITS (including services) |
254 | // and fill it with air | |
255 | ||
256 | dgh[0] = 0.; | |
257 | dgh[1] = 360.; | |
258 | dgh[2] = 12.; | |
259 | dgh[3] = -xltpc-5.-0.1; | |
260 | dgh[4] = 44.9; | |
261 | dgh[5] = 85.; | |
262 | dgh[6] = -xltpc; | |
263 | dgh[7] = 44.9; | |
264 | dgh[8] = 85.; | |
265 | dgh[9] = -xltpc; | |
266 | dgh[10] = 44.9; | |
267 | dgh[11] = 56.1; | |
268 | dgh[12] = -100.7; | |
269 | dgh[13] = 44.9; | |
270 | dgh[14] = 56.1; | |
990d421f | 271 | dgh[15] = -77.2; |
b16d3d87 | 272 | dgh[16] = 44.9; |
273 | dgh[17] = 56.1; | |
274 | dgh[18] = -36.; | |
275 | dgh[19] = 3.29; | |
276 | dgh[20] = 56.1; | |
277 | dgh[21] = 36.; | |
278 | dgh[22] = 3.29; | |
279 | dgh[23] = 56.1; | |
990d421f | 280 | dgh[24] = 77.2; |
b16d3d87 | 281 | dgh[25] = 44.9; |
282 | dgh[26] = 56.1; | |
283 | dgh[27] = 100.7; | |
284 | dgh[28] = 44.9; | |
285 | dgh[29] = 56.1; | |
286 | dgh[30] = xltpc; | |
287 | dgh[31] = 61.5; | |
288 | dgh[32] = 61.5+4.; | |
289 | dgh[33] = xltpc; | |
290 | dgh[34] = 61.5; | |
291 | dgh[35] = 85.; | |
292 | dgh[36] = xltpc+4.+0.1; | |
293 | dgh[37] = 62.4; | |
294 | dgh[38] = 85.; | |
295 | ||
296 | gMC->Gsvolu("ITSV", "PCON", idtmed[275], dgh, 39); | |
297 | ||
298 | // --- Place the ghost volume in its mother volume (ALIC) and make it | |
299 | // invisible | |
300 | ||
301 | gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY"); | |
d12d92a5 | 302 | gMC->Gsatt("ITSV", "SEEN", 0); |
b16d3d87 | 303 | |
304 | ||
33959f40 | 305 | // --- Define ghost volume containing the six layers and fill it with air |
306 | ||
307 | dgh[0] = 0.; | |
308 | dgh[1] = 360.; | |
309 | dgh[2] = 4.; | |
e8031268 | 310 | dgh[3] = -77.2; |
33959f40 | 311 | dgh[4] = 45.; |
312 | dgh[5] = 56.; | |
313 | dgh[6] = -36.; | |
314 | dgh[7] = 3.3; | |
315 | dgh[8] = 56.; | |
316 | dgh[9] = 36.; | |
317 | dgh[10] = 3.3; | |
318 | dgh[11] = 56.; | |
e8031268 | 319 | dgh[12] = 77.2; |
33959f40 | 320 | dgh[13] = 45.; |
321 | dgh[14] = 56.; | |
b16d3d87 | 322 | gMC->Gsvolu("ITSD", "PCON", idtmed[275], dgh, 15); |
33959f40 | 323 | |
324 | // --- Place the ghost volume in its mother volume (ITSV) and make it | |
325 | // invisible | |
326 | ||
b16d3d87 | 327 | gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY"); |
d12d92a5 | 328 | gMC->Gsatt("ITSD", "SEEN", 0); |
33959f40 | 329 | |
330 | // ITS LAYERS (SILICON) | |
331 | ||
332 | dits[0] = rl[0]; | |
333 | dits[1] = rl[0] + drl[0]; | |
334 | dits[2] = dzl[0]; | |
335 | gMC->Gsvolu("ITS1", "TUBE", idtmed[199], dits, 3); | |
b16d3d87 | 336 | gMC->Gspos("ITS1", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 337 | |
338 | dits[0] = rl[1]; | |
339 | dits[1] = rl[1] + drl[1]; | |
340 | dits[2] = dzl[1]; | |
341 | gMC->Gsvolu("ITS2", "TUBE", idtmed[199], dits, 3); | |
b16d3d87 | 342 | gMC->Gspos("ITS2", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 343 | |
344 | dits[0] = rl[2]; | |
345 | dits[1] = rl[2] + drl[2]; | |
346 | dits[2] = dzl[2]; | |
347 | gMC->Gsvolu("ITS3", "TUBE", idtmed[224], dits, 3); | |
b16d3d87 | 348 | gMC->Gspos("ITS3", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 349 | |
350 | dits[0] = rl[3]; | |
351 | dits[1] = rl[3] + drl[3]; | |
352 | dits[2] = dzl[3]; | |
353 | gMC->Gsvolu("ITS4", "TUBE", idtmed[224], dits, 3); | |
b16d3d87 | 354 | gMC->Gspos("ITS4", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 355 | |
356 | dits[0] = rl[4]; | |
357 | dits[1] = rl[4] + drl[4]; | |
358 | dits[2] = dzl[4]; | |
359 | gMC->Gsvolu("ITS5", "TUBE", idtmed[249], dits, 3); | |
b16d3d87 | 360 | gMC->Gspos("ITS5", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 361 | |
362 | dits[0] = rl[5]; | |
363 | dits[1] = rl[5] + drl[5]; | |
364 | dits[2] = dzl[5]; | |
365 | gMC->Gsvolu("ITS6", "TUBE", idtmed[249], dits, 3); | |
b16d3d87 | 366 | gMC->Gspos("ITS6", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 367 | |
d12d92a5 | 368 | // END-LADDER ELECTRONICS BOXES AND CABLES FOR SPD |
33959f40 | 369 | |
d12d92a5 | 370 | gMC->Gsvolu("IEL1", "TUBE", idtmed[208], dits, 0); |
371 | for (i = 0; i < 2; i++) { | |
33959f40 | 372 | dits[0] = rl[i]; |
373 | dits[1] = dits[0] + drb[i]; | |
374 | dits[2] = dzb[i] / 2.; | |
375 | zpos = dzl[i] + dits[2]; | |
d12d92a5 | 376 | gMC->Gsposp("IEL1", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); |
377 | gMC->Gsposp("IEL1", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
33959f40 | 378 | } |
d12d92a5 | 379 | |
380 | // END-LADDER ELECTRONICS BOXES AND CABLES FOR SDD | |
381 | ||
382 | gMC->Gsvolu("IEL2", "TUBE", idtmed[237], dits, 0); | |
383 | for (i = 2; i < 4; i++) { | |
384 | dits[0] = rl[i]; | |
385 | dits[1] = dits[0] + drb[i]; | |
386 | dits[2] = dzb[i] / 2.; | |
387 | zpos = dzl[i] + dits[2]; | |
388 | gMC->Gsposp("IEL2", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
389 | gMC->Gsposp("IEL2", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
390 | } | |
391 | ||
392 | // END-LADDER ELECTRONICS BOXES AND CABLES FOR SSD | |
393 | ||
394 | gMC->Gsvolu("IEL3", "TUBE", idtmed[263], dits, 0); | |
395 | for (i = 4; i < 6; i++) { | |
396 | dits[0] = rl[i]; | |
397 | dits[1] = dits[0] + drb[i]; | |
398 | dits[2] = dzb[i] / 2.; | |
399 | zpos = dzl[i] + dits[2]; | |
400 | gMC->Gsposp("IEL3", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
401 | gMC->Gsposp("IEL3", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
402 | } | |
33959f40 | 403 | |
33959f40 | 404 | // DEFINE END CONES FOR SPD |
405 | ||
406 | pcits[0] = 0.; | |
407 | pcits[1] = 360.; | |
408 | pcits[2] = 2.; | |
409 | pcits[3] = 32.; | |
410 | pcits[4] = (rl[0]+rl[1])/2.; | |
411 | pcits[5] = (rl[0]+rl[1])/2.+2.; // check thickness !! | |
412 | pcits[6] = 39.4; | |
413 | pcits[7] = 10.065; | |
414 | pcits[8] = 10.065+2.; // check thickness !! | |
d12d92a5 | 415 | gMC->Gsvolu("ICO1", "PCON", idtmed[209], pcits, 9); |
33959f40 | 416 | AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.); |
b16d3d87 | 417 | gMC->Gspos("ICO1", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
418 | gMC->Gspos("ICO1", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY"); | |
33959f40 | 419 | |
420 | ||
421 | // DEFINE END CONES FOR SDD | |
422 | ||
423 | pcits[0] = 0.; | |
424 | pcits[1] = 360.; | |
425 | pcits[2] = 2.; | |
426 | pcits[3] = 39.4; | |
427 | pcits[4] = 10.065; | |
428 | pcits[5] = 10.065+3.0; // check thickness !! | |
429 | pcits[6] = 57.4; | |
430 | pcits[7] = 28.; | |
431 | pcits[8] = 28.+3.0; // check thickness !! | |
d12d92a5 | 432 | gMC->Gsvolu("ICO2", "PCON", idtmed[238], pcits, 9); |
b16d3d87 | 433 | gMC->Gspos("ICO2", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
434 | gMC->Gspos("ICO2", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY"); | |
33959f40 | 435 | |
436 | ||
437 | // DEFINE END CONES FOR SSD | |
438 | ||
439 | pcits[0] = 0.; | |
440 | pcits[1] = 360.; | |
441 | pcits[2] = 2.; | |
442 | pcits[3] = 57.4; | |
443 | pcits[4] = 28.0; | |
444 | pcits[5] = 28.0+4.0; // check thickness !! | |
445 | pcits[6] = 74.0; | |
446 | pcits[7] = 47.; | |
447 | pcits[8] = 47.+4.0; // check thickness !! | |
d12d92a5 | 448 | gMC->Gsvolu("ICO3", "PCON", idtmed[264], pcits, 9); |
b16d3d87 | 449 | gMC->Gspos("ICO3", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
450 | gMC->Gspos("ICO3", 2, "ITSD", 0., 0., 0., idrotm[200], "ONLY"); | |
33959f40 | 451 | |
452 | ||
453 | // SERVICES | |
454 | ||
455 | ||
e6892b92 | 456 | // --- Define cables at the end of the ITS cones - copper part |
33959f40 | 457 | |
458 | dgh[0] = 45.; | |
e6892b92 | 459 | dgh[1] = 45.+1.0; |
e8031268 | 460 | dgh[2] = 9.5; |
33959f40 | 461 | |
e6892b92 | 462 | gMC->Gsvolu("ICCU", "TUBE", idtmed[279], dgh, 3); |
e8031268 | 463 | gMC->Gspos("ICCU", 1, "ITSV", 0., 0., 86.7, 0, "ONLY"); |
464 | gMC->Gspos("ICCU", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY"); | |
e6892b92 | 465 | |
466 | // --- Define cables at the end of the ITS cones - carbon part | |
467 | ||
468 | dgh[0] = 45.+1.0; | |
469 | dgh[1] = 45.+1.0+1.5; | |
e8031268 | 470 | dgh[2] = 9.5; |
e6892b92 | 471 | |
472 | gMC->Gsvolu("ICCC", "TUBE", idtmed[274], dgh, 3); | |
e8031268 | 473 | gMC->Gspos("ICCC", 1, "ITSV", 0., 0., 86.7, 0, "ONLY"); |
474 | gMC->Gspos("ICCC", 2, "ITSV", 0., 0., -86.7, idrotm[200], "ONLY"); | |
33959f40 | 475 | |
476 | // --- Define patch panels at the end of the ITS cones | |
477 | ||
478 | dgh[0] = 45.; | |
479 | dgh[1] = 56.; | |
480 | dgh[2] = 2.25; | |
481 | ||
e6892b92 | 482 | gMC->Gsvolu("IPAN", "TUBE", idtmed[285], dgh, 3); |
b16d3d87 | 483 | gMC->Gspos("IPAN", 1, "ITSV", 0., 0., 98.45, 0, "ONLY"); |
484 | gMC->Gspos("IPAN", 2, "ITSV", 0., 0., -98.45, idrotm[200], "ONLY"); | |
33959f40 | 485 | |
e6892b92 | 486 | // --- Define cables/cooling below the TPC on the absorber side - copper part |
33959f40 | 487 | |
488 | dgh[0] = 0.; | |
489 | dgh[1] = 360.; | |
490 | dgh[2] = 2.; | |
491 | dgh[3] = 100.7; | |
492 | dgh[4] = 45.2; | |
e6892b92 | 493 | dgh[5] = 45.2+1.0; |
33959f40 | 494 | dgh[6] = xltpc; |
495 | dgh[7] = 61.8; | |
e6892b92 | 496 | dgh[8] = 61.8+1.0; |
497 | gMC->Gsvolu("ICU1", "PCON", idtmed[279], dgh, 9); | |
498 | gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 0., 0, "ONLY"); | |
499 | ||
500 | // --- Define cables/cooling below the TPC on the absorber side - carbon part | |
501 | ||
502 | dgh[0] = 0.; | |
503 | dgh[1] = 360.; | |
504 | dgh[2] = 2.; | |
505 | dgh[3] = 100.7; | |
506 | dgh[4] = 45.2+1.0; | |
507 | dgh[5] = 45.2+1.0+1.5; | |
508 | dgh[6] = xltpc; | |
509 | dgh[7] = 61.8+1.0; | |
510 | dgh[8] = 61.8+1.0+1.5; | |
511 | gMC->Gsvolu("ICC1", "PCON", idtmed[274], dgh, 9); | |
512 | gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 0., 0, "ONLY"); | |
513 | ||
33959f40 | 514 | |
e6892b92 | 515 | // --- Define cables/cooling behind the TPC on the absorber side - copper part |
516 | ||
517 | dgh[0] = 0.; | |
518 | dgh[1] = 360.; | |
519 | dgh[2] = 2.; | |
520 | dgh[3] = xltpc+1.5; | |
521 | dgh[4] = 62.5; | |
522 | dgh[5] = 74.5; | |
523 | dgh[6] = xltpc+1.5+1.0; | |
524 | dgh[7] = 62.5; | |
525 | dgh[8] = 74.5; | |
526 | gMC->Gsvolu("ICU2", "PCON", idtmed[279], dgh, 9); | |
527 | gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 0., 0, "ONLY"); | |
528 | ||
529 | // --- Define cables/cooling behind the TPC on the absorber side - carbon part | |
33959f40 | 530 | |
531 | dgh[0] = 0.; | |
532 | dgh[1] = 360.; | |
533 | dgh[2] = 2.; | |
534 | dgh[3] = xltpc; | |
535 | dgh[4] = 62.5; | |
536 | dgh[5] = 74.5; | |
e6892b92 | 537 | dgh[6] = xltpc+1.5; |
33959f40 | 538 | dgh[7] = 62.5; |
539 | dgh[8] = 74.5; | |
e6892b92 | 540 | gMC->Gsvolu("ICC2", "PCON", idtmed[274], dgh, 9); |
541 | gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 0., 0, "ONLY"); | |
33959f40 | 542 | |
d12d92a5 | 543 | // --- Define cables/cooling below the TPC on the other side w.r.t. |
e6892b92 | 544 | // the absorber - copper part |
33959f40 | 545 | |
546 | dgh[0] = 45.; | |
e6892b92 | 547 | dgh[1] = 45.+1.0; |
548 | dgh[2] = (xltpc-100.7+1.5)/2.; | |
549 | gMC->Gsvolu("ICU3", "TUBE", idtmed[279], dgh, 3); | |
550 | gMC->Gspos("ICU3", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY"); | |
551 | ||
552 | // --- Define cables/cooling below the TPC on the other side w.r.t. | |
553 | // the absorber - carbon part | |
554 | ||
555 | dgh[0] = 45.+1.0; | |
556 | dgh[1] = 45.+1.0+1.5; | |
33959f40 | 557 | dgh[2] = (xltpc-100.7)/2.; |
e6892b92 | 558 | gMC->Gsvolu("ICC3", "TUBE", idtmed[274], dgh, 3); |
559 | gMC->Gspos("ICC3", 1, "ITSV", 0., 0., -100.7-dgh[2], 0, "ONLY"); | |
33959f40 | 560 | |
561 | ||
562 | // --- Define cables/cooling behind the TPC on other side w.r.t. the absorber | |
e6892b92 | 563 | // copper part |
33959f40 | 564 | |
565 | dgh[0] = 0.; | |
566 | dgh[1] = 360.; | |
567 | dgh[2] = 2.; | |
e6892b92 | 568 | dgh[3] = -xltpc-1.5-1.0; |
33959f40 | 569 | dgh[4] = 45.; |
570 | dgh[5] = 74.5; | |
e6892b92 | 571 | dgh[6] = -xltpc-1.5; |
33959f40 | 572 | dgh[7] = 45.; |
573 | dgh[8] = 74.5; | |
e6892b92 | 574 | gMC->Gsvolu("ICU4", "PCON", idtmed[279], dgh, 9); |
575 | gMC->Gspos("ICU4", 1, "ITSV", 0., 0., 0., 0, "ONLY"); | |
576 | ||
577 | // --- Define cables/cooling behind the TPC on other side w.r.t. the absorber | |
578 | // carbon part | |
579 | ||
580 | dgh[0] = 0.; | |
581 | dgh[1] = 360.; | |
582 | dgh[2] = 2.; | |
583 | dgh[3] = -xltpc-1.5; | |
584 | dgh[4] = 45.+1.0; | |
585 | dgh[5] = 74.5; | |
586 | dgh[6] = -xltpc; | |
587 | dgh[7] = 45.+1.0; | |
588 | dgh[8] = 74.5; | |
589 | gMC->Gsvolu("ICC4", "PCON", idtmed[274], dgh, 9); | |
590 | gMC->Gspos("ICC4", 1, "ITSV", 0., 0., 0., 0, "ONLY"); | |
33959f40 | 591 | |
d12d92a5 | 592 | // --- Define hook to the TPC on other side w.r.t. the absorber |
33959f40 | 593 | |
594 | dgh[0] = 74.5; | |
595 | dgh[1] = 79.5; | |
596 | dgh[2] = 2.5; | |
d12d92a5 | 597 | gMC->Gsvolu("IHOK", "TUBE", idtmed[284], dgh, 3); |
b16d3d87 | 598 | gMC->Gspos("IHOK", 1, "ITSV", 0., 0., -xltpc-dgh[2], 0, "ONLY"); |
33959f40 | 599 | |
600 | ||
601 | // --- Outputs the geometry tree in the EUCLID/CAD format | |
602 | ||
603 | if (fEuclidOut) { | |
604 | gMC->WriteEuclid("ITSgeometry", "ITSV", 1, 5); | |
605 | } | |
606 | } | |
607 | //_____________________________________________________________________________ | |
608 | void AliITSvPPRcoarseasymm::CreateMaterials(){ | |
609 | //////////////////////////////////////////////////////////////////////// | |
610 | // | |
611 | // Create ITS materials | |
612 | // This function defines the default materials used in the Geant | |
613 | // Monte Carlo simulations for the geometries AliITSv1, AliITSv3, | |
614 | // AliITSvPPRcoarseasymm. | |
615 | // In general it is automatically replaced by | |
616 | // the CreatMaterials routine defined in AliITSv?. Should the function | |
617 | // CreateMaterials not exist for the geometry version you are using this | |
618 | // one is used. See the definition found in AliITSv5 or the other routine | |
619 | // for a complete definition. | |
620 | // | |
621 | // Water H2O | |
622 | Float_t awat[2] = { 1.00794,15.9994 }; | |
623 | Float_t zwat[2] = { 1.,8. }; | |
624 | Float_t wwat[2] = { 2.,1. }; | |
625 | Float_t denswat = 1.; | |
626 | // Freon | |
627 | Float_t afre[2] = { 12.011,18.9984032 }; | |
628 | Float_t zfre[2] = { 6.,9. }; | |
629 | Float_t wfre[2] = { 5.,12. }; | |
630 | Float_t densfre = 1.5; | |
631 | // Ceramics | |
632 | // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3 | |
633 | Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 }; | |
634 | Float_t zcer[5] = { 13.,8.,14.,25., 24. }; | |
635 | Float_t wcer[5] = { .49976,1.01233,.01307, .01782,.00342 }; | |
636 | Float_t denscer = 3.6; | |
637 | // | |
638 | // 60% SiO2 , 40% G10FR4 | |
639 | // PC board | |
640 | Float_t apcb[3] = { 28.0855,15.9994,17.749 }; | |
641 | Float_t zpcb[3] = { 14.,8.,8.875 }; | |
642 | Float_t wpcb[3] = { .28,.32,.4 }; | |
643 | Float_t denspcb = 1.8; | |
644 | // POLYETHYL | |
645 | Float_t apoly[2] = { 12.01,1. }; | |
646 | Float_t zpoly[2] = { 6.,1. }; | |
647 | Float_t wpoly[2] = { .33,.67 }; | |
d12d92a5 | 648 | // old SERVICES |
33959f40 | 649 | Float_t zserv[4] = { 1.,6.,26.,29. }; |
650 | Float_t aserv[4] = { 1.,12.,55.8,63.5 }; | |
651 | Float_t wserv[4] = { .014,.086,.42,.48 }; | |
d12d92a5 | 652 | // Stainless steel |
653 | Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 }; | |
654 | Float_t zsteel[4] = { 26.,24.,28.,14. }; | |
655 | Float_t wsteel[4] = { .715,.18,.1,.005 }; | |
656 | ||
33959f40 | 657 | |
658 | Int_t isxfld = gAlice->Field()->Integ(); | |
659 | Float_t sxmgmx = gAlice->Field()->Max(); | |
660 | ||
661 | ||
662 | // --- Define the various materials for GEANT --- | |
663 | ||
664 | // 200-224 --> Silicon Pixel Detectors (detectors, chips, buses, cooling,..) | |
665 | ||
666 | AliMaterial(0, "SPD Si$", 28.0855, 14., 2.33, 9.36, 999); | |
667 | AliMaterial(1, "SPD Si chip$", 28.0855, 14., 2.33, 9.36, 999); | |
668 | AliMaterial(2, "SPD Si bus$", 28.0855, 14., 2.33, 9.36, 999); | |
669 | AliMaterial(3, "SPD C$", 12.011, 6., 2.265,18.8, 999); | |
670 | // v. dens | |
671 | AliMaterial(4, "SPD Air$", 14.61, 7.3, .001205, 30423., 999); | |
672 | AliMaterial(5, "SPD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
673 | AliMaterial(6, "SPD Al$", 26.981539, 13., 2.6989, 8.9, 999); | |
674 | AliMixture( 7, "SPD Water $", awat, zwat, denswat, -2, wwat); | |
675 | AliMixture( 8, "SPD Freon$", afre, zfre, densfre, -2, wfre); | |
d12d92a5 | 676 | AliMaterial(9, "SPD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!! |
677 | AliMaterial(10, "SPD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!! | |
33959f40 | 678 | // ** |
d12d92a5 | 679 | AliMedium(0, "SPD Si$", 0, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
680 | AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
681 | AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
682 | AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
683 | AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
684 | AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00); | |
685 | AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
686 | AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
687 | AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
688 | AliMedium(9, "SPD End ladder",9, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
689 | AliMedium(10, "SPD cone$", 10, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
33959f40 | 690 | |
691 | // 225-249 --> Silicon Drift Detectors (detectors, chips, buses, cooling,..) | |
692 | ||
693 | AliMaterial(25, "SDD Si$", 28.0855, 14., 2.33, 9.36, 999); | |
694 | AliMaterial(26, "SDD Si chip$", 28.0855, 14., 2.33, 9.36, 999); | |
695 | AliMaterial(27, "SDD Si bus$", 28.0855, 14., 2.33, 9.36, 999); | |
696 | AliMaterial(28, "SDD C$", 12.011, 6., 2.265,18.8, 999); | |
697 | // v. dens | |
698 | AliMaterial(29, "SDD Air$", 14.61, 7.3, .001205, 30423., 999); | |
699 | AliMaterial(30, "SDD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
700 | AliMaterial(31, "SDD Al$", 26.981539, 13., 2.6989, 8.9, 999); | |
701 | // After a call with ratios by number (negative number of elements), | |
702 | // the ratio array is changed to the ratio by weight, so all successive | |
703 | // calls with the same array must specify the number of elements as | |
704 | // positive | |
705 | AliMixture(32, "SDD Water $", awat, zwat, denswat, 2, wwat); | |
706 | // After a call with ratios by number (negative number of elements), | |
707 | // the ratio array is changed to the ratio by weight, so all successive | |
708 | // calls with the same array must specify the number of elements as | |
709 | // positive | |
710 | AliMixture( 33, "SDD Freon$", afre, zfre, densfre, 2, wfre); | |
711 | AliMixture( 34, "SDD PCB$", apcb, zpcb, denspcb, 3, wpcb); | |
712 | AliMaterial(35, "SDD Copper$", 63.546, 29., 8.96, 1.43, 999); | |
713 | AliMixture( 36, "SDD Ceramics$", acer, zcer, denscer, -5, wcer); | |
714 | AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999); | |
d12d92a5 | 715 | AliMaterial(38, "SDD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!! |
716 | AliMaterial(39, "SDD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!! | |
33959f40 | 717 | // ** |
718 | // check A and Z | |
d12d92a5 | 719 | AliMedium(25, "SDD Si$", 25, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
33959f40 | 720 | AliMedium(26, "SDD Si chip$", 26, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
721 | AliMedium(27, "SDD Si bus$", 27, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
722 | AliMedium(28, "SDD C$", 28, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
723 | AliMedium(29, "SDD Air$", 29, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
724 | AliMedium(30, "SDD Vacuum$", 30, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00); | |
725 | AliMedium(31, "SDD Al$", 31, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
726 | AliMedium(32, "SDD Water $", 32, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
727 | AliMedium(33, "SDD Freon$", 33, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
728 | AliMedium(34, "SDD PCB$", 34, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
729 | AliMedium(35, "SDD Copper$", 35, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
730 | AliMedium(36, "SDD Ceramics$",36, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
731 | AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
d12d92a5 | 732 | AliMedium(38, "SDD End ladder",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
733 | AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
33959f40 | 734 | |
735 | // 250-274 --> Silicon Strip Detectors (detectors, chips, buses, cooling,..) | |
736 | ||
737 | AliMaterial(50, "SSD Si$", 28.0855, 14., 2.33, 9.36, 999.); | |
738 | AliMaterial(51, "SSD Si chip$", 28.0855, 14., 2.33, 9.36, 999.); | |
739 | AliMaterial(52, "SSD Si bus$", 28.0855, 14., 2.33, 9.36, 999.); | |
740 | AliMaterial(53, "SSD C$", 12.011, 6., 2.265,18.8, 999.); | |
741 | // v. dens | |
742 | AliMaterial(54, "SSD Air$", 14.61, 7.3, .001205, 30423., 999); | |
743 | AliMaterial(55, "SSD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
744 | AliMaterial(56, "SSD Al$", 26.981539, 13., 2.6989, 8.9, 999); | |
745 | // After a call with ratios by number (negative number of elements), | |
746 | // the ratio array is changed to the ratio by weight, so all successive | |
747 | // calls with the same array must specify the number of elements as | |
748 | // positive | |
749 | AliMixture(57, "SSD Water $", awat, zwat, denswat, 2, wwat); | |
750 | // After a call with ratios by number (negative number of elements), | |
751 | // the ratio array is changed to the ratio by weight, so all successive | |
752 | // calls with the same array must specify the number of elements as | |
753 | // positive | |
754 | AliMixture(58, "SSD Freon$", afre, zfre, densfre, 2, wfre); | |
755 | AliMixture(59, "SSD PCB$", apcb, zpcb, denspcb, 3, wpcb); | |
756 | AliMaterial(60, "SSD Copper$", 63.546, 29., 8.96, 1.43, 999.); | |
757 | // After a call with ratios by number (negative number of elements), | |
758 | // the ratio array is changed to the ratio by weight, so all successive | |
759 | // calls with the same array must specify the number of elements as | |
760 | // positive | |
761 | AliMixture( 61, "SSD Ceramics$", acer, zcer, denscer, 5, wcer); | |
762 | AliMaterial(62, "SSD Kapton$", 12.011, 6., 1.3, 31.27, 999.); | |
763 | // check A and Z | |
d12d92a5 | 764 | AliMaterial(63, "SSD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.); |
765 | AliMaterial(64, "SSD End ladder$",28.0855, 14., 2.33, 9.36, 999); // check !!!! | |
766 | AliMaterial(65, "SSD cone$",28.0855, 14., 2.33, 9.36, 999); // check !!!! | |
33959f40 | 767 | // ** |
d12d92a5 | 768 | AliMedium(50, "SSD Si$", 50, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
33959f40 | 769 | AliMedium(51, "SSD Si chip$", 51, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
770 | AliMedium(52, "SSD Si bus$", 52, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
771 | AliMedium(53, "SSD C$", 53, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
772 | AliMedium(54, "SSD Air$", 54, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
773 | AliMedium(55, "SSD Vacuum$", 55, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00); | |
774 | AliMedium(56, "SSD Al$", 56, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
775 | AliMedium(57, "SSD Water $", 57, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
776 | AliMedium(58, "SSD Freon$", 58, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
777 | AliMedium(59, "SSD PCB$", 59, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
778 | AliMedium(60, "SSD Copper$", 60, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
779 | AliMedium(61, "SSD Ceramics$",61, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
780 | AliMedium(62, "SSD Kapton$", 62, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
781 | AliMedium(63, "SSD G10FR4$", 63, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
d12d92a5 | 782 | AliMedium(64, "SPD End ladder",64, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
783 | AliMedium(65, "SPD cone$", 65, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
33959f40 | 784 | |
785 | // 275-299 --> General (end-caps, frames, cooling, cables, etc.) | |
786 | ||
787 | AliMaterial(75, "GEN C$", 12.011, 6., 2.265, 18.8, 999.); | |
788 | // verify density | |
789 | AliMaterial(76, "GEN Air$", 14.61, 7.3, .001205, 30423., 999); | |
790 | AliMaterial(77, "GEN Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
791 | AliMixture( 78, "GEN POLYETHYL$", apoly, zpoly, .95, -2, wpoly); | |
792 | AliMixture( 79, "GEN SERVICES$", aserv, zserv, 4.68, 4, wserv); | |
793 | AliMaterial(80, "GEN Copper$", 63.546, 29., 8.96, 1.43, 999.); | |
794 | // After a call with ratios by number (negative number of elements), | |
795 | // the ratio array is changed to the ratio by weight, so all successive | |
796 | // calls with the same array must specify the number of elements as | |
797 | // positive | |
798 | AliMixture(81, "GEN Water $", awat, zwat, denswat, 2, wwat); | |
e6892b92 | 799 | // AliMaterial(82, "GEN Cables$", 12.011, 6., 2.265, 18.8, 999.); // check !!! |
800 | // AliMaterial(83, "GEN patch pan$", 12.011, 6., 2.265, 18.8, 999.); // check !!! | |
801 | // AliMaterial(84, "GEN serv$", 12.011, 6., 2.265, 18.8, 999.); // check !!! | |
d12d92a5 | 802 | AliMixture(85, "GEN Inox$", asteel, zsteel, 7.88, 4, wsteel); |
e6892b92 | 803 | AliMaterial(86, "GEN Al$", 26.981539, 13., 2.6989, 8.9, 999); |
33959f40 | 804 | // ** |
805 | AliMedium(75,"GEN C$", 75, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
806 | AliMedium(76,"GEN Air$", 76, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
807 | AliMedium(77,"GEN Vacuum$", 77, 0,isxfld,sxmgmx, 10., .10, .1, .100,10.00); | |
808 | AliMedium(78,"GEN POLYETHYL$",78, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
809 | AliMedium(79,"GEN SERVICES$", 79, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
810 | AliMedium(80,"GEN Copper$", 80, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
811 | AliMedium(81,"GEN Water $", 81, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
e6892b92 | 812 | // AliMedium(82,"GEN Cables$", 82, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
813 | // AliMedium(83,"GEN patch pan$",83, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
814 | // AliMedium(84,"GEN serv$", 84, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
d12d92a5 | 815 | AliMedium(85,"GEN Inox$", 85, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
e6892b92 | 816 | AliMedium(86, "GEN Al$", 86, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
33959f40 | 817 | } |
818 | //_____________________________________________________________________________ | |
819 | void AliITSvPPRcoarseasymm::Init(){ | |
820 | //////////////////////////////////////////////////////////////////////// | |
821 | // Initialise the ITS after it has been created. | |
822 | //////////////////////////////////////////////////////////////////////// | |
823 | ||
824 | // | |
825 | AliITS::Init(); | |
826 | fMajorVersion = 1; | |
827 | fMinorVersion = 0; | |
828 | } | |
829 | ||
830 | //_____________________________________________________________________________ | |
831 | void AliITSvPPRcoarseasymm::DrawModule(){ | |
832 | //////////////////////////////////////////////////////////////////////// | |
833 | // Draw a shaded view of the FMD version 6. | |
834 | //////////////////////////////////////////////////////////////////////// | |
835 | ||
836 | // Set everything unseen | |
837 | gMC->Gsatt("*", "seen", -1); | |
838 | // | |
839 | // Set ALIC mother visible | |
840 | gMC->Gsatt("ALIC","SEEN",0); | |
841 | // | |
842 | // Set the volumes visible | |
843 | gMC->Gsatt("ITSD","SEEN",0); | |
844 | gMC->Gsatt("ITS1","SEEN",1); | |
845 | gMC->Gsatt("ITS2","SEEN",1); | |
846 | gMC->Gsatt("ITS3","SEEN",1); | |
847 | gMC->Gsatt("ITS4","SEEN",1); | |
848 | gMC->Gsatt("ITS5","SEEN",1); | |
849 | gMC->Gsatt("ITS6","SEEN",1); | |
850 | ||
851 | gMC->Gsatt("IPCB","SEEN",1); | |
852 | gMC->Gsatt("ICO2","SEEN",1); | |
853 | gMC->Gsatt("ICER","SEEN",0); | |
854 | gMC->Gsatt("ISI2","SEEN",0); | |
855 | gMC->Gsatt("IPLA","SEEN",0); | |
856 | gMC->Gsatt("ICO3","SEEN",0); | |
857 | gMC->Gsatt("IEPX","SEEN",0); | |
858 | gMC->Gsatt("ISI3","SEEN",1); | |
859 | gMC->Gsatt("ISUP","SEEN",0); | |
860 | gMC->Gsatt("ICHO","SEEN",0); | |
861 | gMC->Gsatt("ICMO","SEEN",0); | |
862 | gMC->Gsatt("ICMD","SEEN",0); | |
863 | gMC->Gsatt("ICCO","SEEN",1); | |
864 | gMC->Gsatt("ICCM","SEEN",0); | |
865 | gMC->Gsatt("ITMD","SEEN",0); | |
866 | gMC->Gsatt("ITTT","SEEN",1); | |
867 | ||
868 | // | |
869 | gMC->Gdopt("hide", "on"); | |
870 | gMC->Gdopt("shad", "on"); | |
871 | gMC->Gsatt("*", "fill", 7); | |
872 | gMC->SetClipBox("."); | |
873 | gMC->SetClipBox("*", 0, 300, -300, 300, -300, 300); | |
874 | gMC->DefaultRange(); | |
875 | gMC->Gdraw("alic", 40, 30, 0, 11, 10, .07, .07); | |
876 | gMC->Gdhead(1111, "Inner Tracking System Version 1"); | |
877 | gMC->Gdman(17, 6, "MAN"); | |
878 | } | |
879 | //_____________________________________________________________________________ | |
880 | void AliITSvPPRcoarseasymm::StepManager(){ | |
881 | //////////////////////////////////////////////////////////////////////// | |
882 | // Called for every step in the ITS, then calls the AliITShit class | |
883 | // creator with the information to be recoreded about that hit. | |
884 | //////////////////////////////////////////////////////////////////////// | |
b16d3d87 | 885 | |
886 | /* | |
33959f40 | 887 | Int_t copy, id; |
888 | Float_t hits[8]; | |
889 | Int_t vol[4]; | |
890 | TLorentzVector position, momentum; | |
891 | // TClonesArray &lhits = *fHits; | |
892 | // | |
893 | // no hits for this coarse asymmetric version. | |
894 | // | |
895 | ||
896 | // | |
897 | // Track status | |
898 | vol[3] = 0; | |
899 | if(gMC->IsTrackInside()) vol[3] += 1; | |
900 | if(gMC->IsTrackEntering()) vol[3] += 2; | |
901 | if(gMC->IsTrackExiting()) vol[3] += 4; | |
902 | if(gMC->IsTrackOut()) vol[3] += 8; | |
903 | if(gMC->IsTrackDisappeared()) vol[3] += 16; | |
904 | if(gMC->IsTrackStop()) vol[3] += 32; | |
905 | if(gMC->IsTrackAlive()) vol[3] += 64; | |
906 | // | |
907 | // Fill hit structure. | |
908 | if( !(gMC->TrackCharge()) ) return; | |
909 | // | |
910 | // Only entering charged tracks | |
911 | if((id=gMC->CurrentVolID(copy))==fIdSens[0]) { | |
912 | vol[0]=1; | |
913 | id=gMC->CurrentVolOffID(1,copy); | |
914 | vol[1]=copy; | |
915 | id=gMC->CurrentVolOffID(2,copy); | |
916 | vol[2]=copy; | |
917 | } else if(id==fIdSens[1]) { | |
918 | vol[0]=2; | |
919 | id=gMC->CurrentVolOffID(1,copy); | |
920 | vol[1]=copy; | |
921 | id=gMC->CurrentVolOffID(2,copy); | |
922 | vol[2]=copy; | |
923 | } else if(id==fIdSens[2]) { | |
924 | vol[0]=3; | |
925 | vol[1]=copy; | |
926 | id=gMC->CurrentVolOffID(1,copy); | |
927 | vol[2]=copy; | |
928 | } else if(id==fIdSens[3]) { | |
929 | vol[0]=4; | |
930 | vol[1]=copy; | |
931 | id=gMC->CurrentVolOffID(1,copy); | |
932 | vol[2]=copy; | |
933 | } else if(id==fIdSens[4]) { | |
934 | vol[0]=5; | |
935 | vol[1]=copy; | |
936 | id=gMC->CurrentVolOffID(1,copy); | |
937 | vol[2]=copy; | |
938 | } else if(id==fIdSens[5]) { | |
939 | vol[0]=6; | |
940 | vol[1]=copy; | |
941 | id=gMC->CurrentVolOffID(1,copy); | |
942 | vol[2]=copy; | |
943 | } else return; | |
944 | gMC->TrackPosition(position); | |
945 | gMC->TrackMomentum(momentum); | |
946 | hits[0]=position[0]; | |
947 | hits[1]=position[1]; | |
948 | hits[2]=position[2]; | |
949 | hits[3]=momentum[0]; | |
950 | hits[4]=momentum[1]; | |
951 | hits[5]=momentum[2]; | |
952 | hits[6]=gMC->Edep(); | |
953 | hits[7]=gMC->TrackTime(); | |
954 | // new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->CurrentTrack(),vol,hits); | |
955 | // | |
956 | // no hits for this coarse asymmetric version. | |
957 | // | |
b16d3d87 | 958 | */ |
33959f40 | 959 | } |
960 | /* | |
961 | //____________________________________________________________________________ | |
962 | void AliITSvPPRcoarseasymm::Streamer(TBuffer &R__b){ | |
963 | //////////////////////////////////////////////////////////////////////// | |
964 | // A dummy Streamer function for this class AliITSvPPRcoarseasymm. By default it | |
965 | // only streams the AliITS class as it is required. Since this class | |
966 | // dosen't contain any "real" data to be saved, it doesn't. | |
967 | //////////////////////////////////////////////////////////////////////// | |
968 | ||
969 | if (R__b.IsReading()) { | |
970 | Version_t R__v = R__b.ReadVersion(); if (R__v) { } | |
971 | AliITS::Streamer(R__b); | |
972 | } else { | |
973 | R__b.WriteVersion(AliITSvPPRcoarseasymm::IsA()); | |
974 | AliITS::Streamer(R__b); | |
975 | } // end if R__b.IsReading() | |
976 | } | |
977 | */ |