| d1cd2474 |
1 | // $Id$ |
| 2 | // |
| 3 | // Class AliMUONSlatGeometryBuilder |
| 4 | // ------------------------------- |
| 5 | // Abstract base class for geometry construction per chamber. |
| 6 | // |
| 2057e0cc |
7 | // Author: Eric Dumonteil (dumontei@cea.fr) |
| 8 | |
| 9 | |
| c10e6eaf |
10 | // This Builder is designed according to the enveloppe methode. The basic idea is to be able to allow moves |
| 11 | // of the slats on the support panels. |
| 12 | // Those moves can be described with a simple set of parameters. The next step should be now to describe all |
| 13 | // the slats and their places by a unique |
| 14 | // class, which would make the SlatBuilder far more compact since now only three parameters can define a slat |
| 15 | // and its position, like: |
| 2057e0cc |
16 | // * Bool_t rounded_shape_slat |
| 17 | // * Float_t slat_length |
| 18 | // * Float_t slat_number or Float_t slat_position |
| 19 | |
| d1cd2474 |
20 | #include <TVirtualMC.h> |
| d1cd2474 |
21 | #include <TGeoMatrix.h> |
| 30178c30 |
22 | #include <Riostream.h> |
| d1cd2474 |
23 | |
| 24 | #include "AliMUONSlatGeometryBuilder.h" |
| 25 | #include "AliMUON.h" |
| 26 | #include "AliMUONChamber.h" |
| 27 | #include "AliMUONChamberGeometry.h" |
| a432117a |
28 | #include "AliMUONGeometryEnvelopeStore.h" |
| 30178c30 |
29 | #include "AliRun.h" |
| d1cd2474 |
30 | |
| 31 | ClassImp(AliMUONSlatGeometryBuilder) |
| 32 | |
| 30178c30 |
33 | //Int_t ConvertSlatNum(Int_t numslat, Int_t quadnum, Int_t fspq); |
| d1cd2474 |
34 | |
| 35 | //______________________________________________________________________________ |
| 36 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(AliMUON* muon) |
| a432117a |
37 | : AliMUONVGeometryBuilder("slat.dat", |
| 38 | &muon->Chamber(4), &muon->Chamber(5), |
| 30178c30 |
39 | &muon->Chamber(6), &muon->Chamber(7), |
| 40 | &muon->Chamber(8), &muon->Chamber(9)), |
| d1cd2474 |
41 | fMUON(muon) |
| 42 | { |
| 43 | // Standard constructor |
| 44 | |
| 45 | } |
| 46 | |
| 47 | //______________________________________________________________________________ |
| 48 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder() |
| 49 | : AliMUONVGeometryBuilder(), |
| 50 | fMUON(0) |
| 51 | { |
| 52 | // Default constructor |
| 53 | } |
| 54 | |
| 55 | |
| 56 | //______________________________________________________________________________ |
| 57 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(const AliMUONSlatGeometryBuilder& rhs) |
| 58 | : AliMUONVGeometryBuilder(rhs) |
| 59 | { |
| 60 | Fatal("Copy constructor", |
| 61 | "Copy constructor is not implemented."); |
| 62 | } |
| 63 | |
| 64 | //______________________________________________________________________________ |
| 65 | AliMUONSlatGeometryBuilder::~AliMUONSlatGeometryBuilder() { |
| 66 | // |
| 67 | } |
| 68 | |
| 69 | //______________________________________________________________________________ |
| 70 | AliMUONSlatGeometryBuilder& |
| 71 | AliMUONSlatGeometryBuilder::operator = (const AliMUONSlatGeometryBuilder& rhs) |
| 72 | { |
| 73 | // check assignement to self |
| 74 | if (this == &rhs) return *this; |
| 75 | |
| 76 | Fatal("operator=", |
| 77 | "Assignment operator is not implemented."); |
| 78 | |
| 79 | return *this; |
| 80 | } |
| 81 | |
| 82 | // |
| 83 | // public methods |
| 84 | // |
| 85 | |
| 86 | //______________________________________________________________________________ |
| 87 | void AliMUONSlatGeometryBuilder::CreateGeometry() |
| 88 | { |
| 2057e0cc |
89 | // CreateGeometry is the method containing all the informations concerning Stations 345 geometry. |
| 90 | // It includes description and placements of support panels and slats. |
| c10e6eaf |
91 | // The code comes directly from what was written in AliMUONv1.cxx before, with modifications concerning |
| 92 | // the use of Enveloppe method to place the Geant volumes. |
| 93 | // Now, few changes would allow the creation of a Slat methode where slat could be described by few parameters, |
| 94 | // and this builder would then be dedicated only to the |
| 2057e0cc |
95 | // placements of the slats. Those modifications could shorten the Station 345 geometry by a non-negligeable factor... |
| d1cd2474 |
96 | |
| 97 | Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099; |
| 98 | |
| 99 | Float_t angle; |
| 100 | Float_t *dum=0; |
| 101 | |
| 102 | // define the id of tracking media: |
| 103 | Int_t idCopper = idtmed[1110]; |
| 104 | Int_t idGlass = idtmed[1111]; |
| 105 | Int_t idCarbon = idtmed[1112]; |
| 106 | Int_t idRoha = idtmed[1113]; |
| c10e6eaf |
107 | Int_t idGas = idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%) |
| 108 | Int_t idAir = idtmed[1100]; // medium 1 |
| d1cd2474 |
109 | |
| 110 | // sensitive area: 40*40 cm**2 |
| 2057e0cc |
111 | const Float_t kSensLength = 40.; |
| 112 | const Float_t kSensHeight = 40.; |
| 113 | const Float_t kSensWidth = 0.5; // according to TDR fig 2.120 |
| 114 | const Int_t kSensMaterial = idGas; |
| 115 | const Float_t kYoverlap = 1.5; |
| d1cd2474 |
116 | |
| 117 | // PCB dimensions in cm; width: 30 mum copper |
| 2057e0cc |
118 | const Float_t kPcbLength = kSensLength; |
| 119 | const Float_t kPcbHeight = 60.; |
| 120 | const Float_t kPcbWidth = 0.003; |
| 121 | const Int_t kPcbMaterial = idCopper; |
| d1cd2474 |
122 | |
| 123 | // Insulating material: 200 mum glass fiber glued to pcb |
| 2057e0cc |
124 | const Float_t kInsuLength = kPcbLength; |
| 125 | const Float_t kInsuHeight = kPcbHeight; |
| 126 | const Float_t kInsuWidth = 0.020; |
| 127 | const Int_t kInsuMaterial = idGlass; |
| d1cd2474 |
128 | |
| 129 | // Carbon fiber panels: 200mum carbon/epoxy skin |
| 2057e0cc |
130 | const Float_t kPanelLength = kSensLength; |
| 131 | const Float_t kPanelHeight = kSensHeight; |
| 132 | const Float_t kPanelWidth = 0.020; |
| 133 | const Int_t kPanelMaterial = idCarbon; |
| d1cd2474 |
134 | |
| 135 | // rohacell between the two carbon panels |
| 2057e0cc |
136 | const Float_t kRohaLength = kSensLength; |
| 137 | const Float_t kRohaHeight = kSensHeight; |
| 138 | const Float_t kRohaWidth = 0.5; |
| 139 | const Int_t kRohaMaterial = idRoha; |
| d1cd2474 |
140 | |
| 141 | // Frame around the slat: 2 sticks along length,2 along height |
| 142 | // H: the horizontal ones |
| 2057e0cc |
143 | const Float_t kHframeLength = kPcbLength; |
| 144 | const Float_t kHframeHeight = 1.5; |
| 145 | const Float_t kHframeWidth = kSensWidth; |
| 146 | const Int_t kHframeMaterial = idGlass; |
| d1cd2474 |
147 | |
| 148 | // V: the vertical ones |
| 2057e0cc |
149 | const Float_t kVframeLength = 4.0; |
| 150 | const Float_t kVframeHeight = kSensHeight + kHframeHeight; |
| 151 | const Float_t kVframeWidth = kSensWidth; |
| 152 | const Int_t kVframeMaterial = idGlass; |
| d1cd2474 |
153 | |
| 154 | // B: the horizontal border filled with rohacell |
| 2057e0cc |
155 | const Float_t kBframeLength = kHframeLength; |
| 156 | const Float_t kBframeHeight = (kPcbHeight - kSensHeight)/2. - kHframeHeight; |
| 157 | const Float_t kBframeWidth = kHframeWidth; |
| 158 | const Int_t kBframeMaterial = idRoha; |
| d1cd2474 |
159 | |
| 160 | // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper) |
| 2057e0cc |
161 | const Float_t kNulocLength = 2.5; |
| 162 | const Float_t kNulocHeight = 7.5; |
| 163 | const Float_t kNulocWidth = 0.0030 + 0.0014; // equivalent copper width of vetronite; |
| 164 | const Int_t kNulocMaterial = idCopper; |
| d1cd2474 |
165 | |
| 2057e0cc |
166 | const Float_t kSlatHeight = kPcbHeight; |
| 167 | const Float_t kSlatWidth = kSensWidth + 2.*(kPcbWidth + kInsuWidth + |
| 168 | 2.* kPanelWidth + kRohaWidth); |
| 169 | const Int_t kSlatMaterial = idAir; |
| 170 | const Float_t kDslatLength = kVframeLength; // border on left and right |
| d1cd2474 |
171 | |
| 172 | Float_t spar[3]; |
| 173 | Int_t i, j; |
| a432117a |
174 | Int_t detElemId; |
| d1cd2474 |
175 | |
| 176 | // the panel volume contains the rohacell |
| 177 | |
| 2057e0cc |
178 | Float_t twidth = 2 * kPanelWidth + kRohaWidth; |
| 179 | Float_t panelpar[3] = { kPanelLength/2., kPanelHeight/2., twidth/2. }; |
| 180 | Float_t rohapar[3] = { kRohaLength/2., kRohaHeight/2., kRohaWidth/2. }; |
| d1cd2474 |
181 | |
| 182 | // insulating material contains PCB-> gas-> 2 borders filled with rohacell |
| 183 | |
| 2057e0cc |
184 | twidth = 2*(kInsuWidth + kPcbWidth) + kSensWidth; |
| 185 | Float_t insupar[3] = { kInsuLength/2., kInsuHeight/2., twidth/2. }; |
| 186 | twidth -= 2 * kInsuWidth; |
| 187 | Float_t pcbpar[3] = { kPcbLength/2., kPcbHeight/2., twidth/2. }; |
| 188 | Float_t senspar[3] = { kSensLength/2., kSensHeight/2., kSensWidth/2. }; |
| 189 | Float_t theight = 2*kHframeHeight + kSensHeight; |
| 190 | Float_t hFramepar[3]={kHframeLength/2., theight/2., kHframeWidth/2.}; |
| 191 | Float_t bFramepar[3]={kBframeLength/2., kBframeHeight/2., kBframeWidth/2.}; |
| 192 | Float_t vFramepar[3]={kVframeLength/2., kVframeHeight/2., kVframeWidth/2.}; |
| 193 | Float_t nulocpar[3]={kNulocLength/2., kNulocHeight/2., kNulocWidth/2.}; |
| d1cd2474 |
194 | Float_t xx; |
| 2057e0cc |
195 | Float_t xxmax = (kBframeLength - kNulocLength)/2.; |
| d1cd2474 |
196 | Int_t index=0; |
| 197 | |
| 198 | AliMUONChamber *iChamber, *iChamber1, *iChamber2; |
| 199 | |
| 200 | Int_t* fStations = new Int_t[5]; |
| 201 | for (Int_t i=0; i<5; i++) fStations[i] = 1; |
| 202 | |
| 203 | if (fStations[2]) |
| 204 | { |
| d1cd2474 |
205 | //******************************************************************** |
| 206 | // Station 3 ** |
| 207 | //******************************************************************** |
| 208 | // indices 1 and 2 for first and second chambers in the station |
| 209 | // iChamber (first chamber) kept for other quanties than Z, |
| 210 | // assumed to be the same in both chambers |
| 211 | |
| 212 | iChamber = GetChamber(4); |
| 213 | iChamber1 = iChamber; |
| 214 | iChamber2 = GetChamber(5); |
| 215 | |
| 84717edf |
216 | //iChamber1->GetGeometry()->SetDebug(kTRUE); |
| d1cd2474 |
217 | //iChamber2->GetGeometry()->SetDebug(kTRUE); |
| 218 | |
| 219 | if (gAlice->GetModule("DIPO")) { |
| 220 | // if DIPO is preset, the whole station will be placed in DDIP volume |
| 221 | iChamber1->GetGeometry()->SetMotherVolume("DDIP"); |
| 222 | iChamber2->GetGeometry()->SetMotherVolume("DDIP"); |
| 223 | } |
| 224 | |
| 225 | // if (gAlice->GetModule("DIPO")) { |
| 226 | // slats5Mother="DDIP"; |
| 227 | // slats6Mother="DDIP"; |
| 228 | |
| 229 | // zoffs5 = zpos1; |
| 230 | // zoffs6 = zpos2; |
| 231 | // } |
| 232 | // else { |
| 233 | // gMC->Gsvolu("S05M", "TUBE", idAir, tpar, 3); |
| 234 | // gMC->Gsvolu("S06M", "TUBE", idAir, tpar, 3); |
| 235 | // gMC->Gspos("S05M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY"); |
| 236 | |
| 237 | // gMC->Gspos("S06M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY"); |
| 238 | // } |
| 239 | |
| 240 | // volumes for slat geometry (xx=5,..,10 chamber id): |
| 241 | // Sxx0 Sxx1 Sxx2 Sxx3 --> Slat Mother volumes |
| 242 | // SxxG --> Sensitive volume (gas) |
| 243 | // SxxP --> PCB (copper) |
| 244 | // SxxI --> Insulator (vetronite) |
| 245 | // SxxC --> Carbon panel |
| 246 | // SxxR --> Rohacell |
| 247 | // SxxH, SxxV --> Horizontal and Vertical frames (vetronite) |
| 248 | // SB5x --> Volumes for the 35 cm long PCB |
| 249 | // slat dimensions: slat is a MOTHER volume!!! made of air |
| 250 | |
| 251 | // only for chamber 5: slat 1 has a PCB shorter by 5cm! |
| 252 | |
| 253 | Float_t tlength = 35.; |
| 254 | Float_t panelpar2[3] = { tlength/2., panelpar[1], panelpar[2]}; |
| 255 | Float_t rohapar2[3] = { tlength/2., rohapar[1], rohapar[2]}; |
| 256 | Float_t insupar2[3] = { tlength/2., insupar[1], insupar[2]}; |
| 257 | Float_t pcbpar2[3] = { tlength/2., pcbpar[1], pcbpar[2]}; |
| 258 | Float_t senspar2[3] = { tlength/2., senspar[1], senspar[2]}; |
| 259 | Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]}; |
| 260 | Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]}; |
| 261 | Float_t *dum=0; |
| 262 | |
| 2057e0cc |
263 | const Int_t kNslats3 = 5; // number of slats per quadrant |
| c10e6eaf |
264 | const Int_t kNPCB3[kNslats3] = {4,4,4,3,2}; // n PCB per slat |
| 265 | const Float_t kXpos3[kNslats3] = {0., 0., 0., 0., 0.};//{31., 0., 0., 0., 0.}; |
| 2057e0cc |
266 | Float_t slatLength3[kNslats3]; |
| d1cd2474 |
267 | |
| 268 | // create and position the slat (mother) volumes |
| 269 | |
| 270 | // char volNam5[5]; |
| 271 | // char volNam6[5]; |
| 272 | char idSlatCh5[5]; |
| 273 | char idSlatCh6[5]; |
| 274 | Float_t xSlat3; |
| 275 | Float_t angle = 0.; |
| d1cd2474 |
276 | Float_t spar2[3]; |
| c10e6eaf |
277 | for (i = 0; i < kNslats3; i++){ |
| 2057e0cc |
278 | slatLength3[i] = kPcbLength * kNPCB3[i] + 2. * kDslatLength; |
| 279 | xSlat3 = slatLength3[i]/2. - kVframeLength/2. + kXpos3[i]; |
| c10e6eaf |
280 | if (i == 1 || i == 0) slatLength3[i] -= 2. *kDslatLength; // frame out in PCB with circular border |
| 2057e0cc |
281 | Float_t ySlat31 = kSensHeight * i - kYoverlap * i; |
| 282 | Float_t ySlat32 = -kSensHeight * i + kYoverlap * i; |
| d1cd2474 |
283 | spar[0] = slatLength3[i]/2.; |
| 2057e0cc |
284 | spar[1] = kSlatHeight/2.; |
| 285 | spar[2] = kSlatWidth/2. * 1.01; |
| d1cd2474 |
286 | // take away 5 cm from the first slat in chamber 5 |
| 287 | Float_t xSlat32 = 0; |
| c10e6eaf |
288 | if (i==0 || i==1 || i==2) { // 1 pcb is shortened by 5cm |
| d1cd2474 |
289 | spar2[0] = spar[0]-5./2.; |
| 290 | xSlat32 = xSlat3 - 5/2.; |
| c10e6eaf |
291 | } else { |
| d1cd2474 |
292 | spar2[0] = spar[0]; |
| 293 | xSlat32 = xSlat3; |
| 294 | } |
| 295 | spar2[1] = spar[1]; |
| 296 | spar2[2] = spar[2]; |
| 297 | Float_t dzCh3=spar[2] * 1.01; |
| 298 | // zSlat to be checked (odd downstream or upstream?) |
| 299 | Float_t zSlat = (i%2 ==0)? -spar[2] : spar[2]; |
| c10e6eaf |
300 | // sprintf(volNam5,"S05%d",i); |
| 301 | // gMC->Gsvolu(volNam5,"BOX",slatMaterial,spar2,3); |
| 302 | // gMC->Gspos(volNam5, i*4+1,slats5Mother, xSlat32, ySlat31, zoffs5+zSlat+2.*dzCh3, 0, "ONLY"); |
| 303 | // gMC->Gspos(volNam5, i*4+2,slats5Mother,-xSlat32, ySlat31, zoffs5+zSlat-2.*dzCh3, 0, "ONLY"); |
| d1cd2474 |
304 | |
| 2057e0cc |
305 | sprintf(idSlatCh5,"LA%d",kNslats3-1+i); |
| 306 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| a432117a |
307 | detElemId = 500 + i + kNslats3-1; |
| 308 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat32, ySlat31, zSlat+2.*dzCh3), |
| c10e6eaf |
309 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
| d1cd2474 |
310 | |
| 2057e0cc |
311 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2+i); |
| 312 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| a432117a |
313 | detElemId = 550 + i + kNslats3-1; |
| 314 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat32, ySlat31, zSlat-2.*dzCh3), |
| c10e6eaf |
315 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
| 316 | |
| 317 | if (i > 0) { |
| 318 | sprintf(idSlatCh5,"LA%d",kNslats3-1-i); |
| c10e6eaf |
319 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| a432117a |
320 | detElemId = 500 - i + kNslats3-1; |
| 321 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat32, ySlat32, zSlat+2.*dzCh3), |
| c10e6eaf |
322 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
| 323 | |
| 324 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2-i); |
| c10e6eaf |
325 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| a432117a |
326 | detElemId = 550 - i + kNslats3-1; |
| 327 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat32, ySlat32, zSlat-2.*dzCh3), |
| c10e6eaf |
328 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
| d1cd2474 |
329 | } |
| 330 | |
| c10e6eaf |
331 | sprintf(idSlatCh6,"LB%d",kNslats3-1+i); |
| 2057e0cc |
332 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar2,3); |
| a432117a |
333 | detElemId = 600 + i + kNslats3-1; |
| 334 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat31, zSlat+2.*dzCh3), |
| c10e6eaf |
335 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
| 2057e0cc |
336 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2+i); |
| 337 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar2,3); |
| a432117a |
338 | detElemId = 650 + i + kNslats3-1; |
| 339 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat31, zSlat-2.*dzCh3), |
| c10e6eaf |
340 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
| 341 | |
| 342 | if (i > 0) { |
| 343 | sprintf(idSlatCh6,"LB%d",kNslats3-1-i); |
| c10e6eaf |
344 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar2,3); |
| a432117a |
345 | detElemId = 600 - i + kNslats3-1; |
| 346 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat32, zSlat+2.*dzCh3), |
| c10e6eaf |
347 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
| 348 | |
| 349 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2-i); |
| c10e6eaf |
350 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar2,3); |
| a432117a |
351 | detElemId = 650 - i + kNslats3-1; |
| 352 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat32, zSlat-2.*dzCh3), |
| c10e6eaf |
353 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
| 354 | } |
| 355 | } |
| d1cd2474 |
356 | |
| 357 | // create the panel volume |
| 358 | |
| 2057e0cc |
359 | gMC->Gsvolu("S05C","BOX",kPanelMaterial,panelpar,3); |
| 360 | gMC->Gsvolu("SB5C","BOX",kPanelMaterial,panelpar2,3); |
| 361 | gMC->Gsvolu("S06C","BOX",kPanelMaterial,panelpar,3); |
| d1cd2474 |
362 | |
| 363 | // create the rohacell volume |
| 364 | |
| 2057e0cc |
365 | gMC->Gsvolu("S05R","BOX",kRohaMaterial,rohapar,3); |
| 366 | gMC->Gsvolu("SB5R","BOX",kRohaMaterial,rohapar2,3); |
| 367 | gMC->Gsvolu("S06R","BOX",kRohaMaterial,rohapar,3); |
| d1cd2474 |
368 | |
| 369 | // create the insulating material volume |
| 370 | |
| 2057e0cc |
371 | gMC->Gsvolu("S05I","BOX",kInsuMaterial,insupar,3); |
| 372 | gMC->Gsvolu("SB5I","BOX",kInsuMaterial,insupar2,3); |
| 373 | gMC->Gsvolu("S06I","BOX",kInsuMaterial,insupar,3); |
| d1cd2474 |
374 | |
| 375 | // create the PCB volume |
| 376 | |
| 2057e0cc |
377 | gMC->Gsvolu("S05P","BOX",kPcbMaterial,pcbpar,3); |
| 378 | gMC->Gsvolu("SB5P","BOX",kPcbMaterial,pcbpar2,3); |
| 379 | gMC->Gsvolu("S06P","BOX",kPcbMaterial,pcbpar,3); |
| d1cd2474 |
380 | |
| 381 | // create the sensitive volumes, |
| 2057e0cc |
382 | gMC->Gsvolu("S05G","BOX",kSensMaterial,dum,0); |
| 383 | gMC->Gsvolu("S06G","BOX",kSensMaterial,dum,0); |
| d1cd2474 |
384 | |
| 385 | |
| 386 | // create the vertical frame volume |
| 387 | |
| 2057e0cc |
388 | gMC->Gsvolu("S05V","BOX",kVframeMaterial,vFramepar,3); |
| 389 | gMC->Gsvolu("S06V","BOX",kVframeMaterial,vFramepar,3); |
| d1cd2474 |
390 | |
| 391 | // create the horizontal frame volume |
| 392 | |
| 393 | |
| 2057e0cc |
394 | gMC->Gsvolu("S05H","BOX",kHframeMaterial,hFramepar,3); |
| 395 | gMC->Gsvolu("SB5H","BOX",kHframeMaterial,hFramepar2,3); |
| 396 | gMC->Gsvolu("S06H","BOX",kHframeMaterial,hFramepar,3); |
| d1cd2474 |
397 | |
| 398 | // create the horizontal border volume |
| 399 | |
| 2057e0cc |
400 | gMC->Gsvolu("S05B","BOX",kBframeMaterial,bFramepar,3); |
| 401 | gMC->Gsvolu("SB5B","BOX",kBframeMaterial,bFramepar2,3); |
| 402 | gMC->Gsvolu("S06B","BOX",kBframeMaterial,bFramepar,3); |
| d1cd2474 |
403 | |
| c10e6eaf |
404 | index = 0; |
| 2057e0cc |
405 | for (i = 0; i<kNslats3; i++){ |
| c10e6eaf |
406 | for (Int_t quadrant=1; quadrant<=4; quadrant++) { |
| 407 | |
| 408 | if (i==0&&quadrant==2) continue; |
| 409 | if (i==0&&quadrant==4) continue; |
| 410 | |
| 411 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(i,quadrant,kNslats3-1)); |
| 412 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(i,quadrant,kNslats3-1)); |
| 413 | Float_t xvFrame = (slatLength3[i] - kVframeLength)/2.; |
| 414 | Float_t xvFrame2 = xvFrame; |
| 415 | |
| 416 | if ( i==0 || i==1 || i ==2 ) xvFrame2 -= 5./2.; |
| 417 | |
| 418 | // position the vertical frames |
| 419 | if (i!=1 && i!=0) { |
| a432117a |
420 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| c10e6eaf |
421 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.)); |
| a432117a |
422 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| c10e6eaf |
423 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame2,0.,0.)); |
| a432117a |
424 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| c10e6eaf |
425 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| a432117a |
426 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| c10e6eaf |
427 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 428 | |
| 429 | } |
| 430 | // position the panels and the insulating material |
| 431 | for (j=0; j<kNPCB3[i]; j++){ |
| 432 | if (i==1&&j==0) continue; |
| 433 | if (i==0&&j==0) continue; |
| 434 | index++; |
| 435 | Float_t xx = kSensLength * (-kNPCB3[i]/2.+j+.5); |
| 436 | Float_t xx2 = xx+ 5/2.; |
| d1cd2474 |
437 | |
| c10e6eaf |
438 | Float_t zPanel = spar[2] - panelpar[2]; |
| 439 | if ( (i == 0 || i == 1 || i == 2) && j == kNPCB3[i]-1) { // 1 pcb is shortened by 5cm |
| a432117a |
440 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5C", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 441 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5C", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 442 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5I", idSlatCh5, index,TGeoTranslation(xx,0.,0.)); |
| c10e6eaf |
443 | } |
| 444 | else if ( (i == 0 || i == 1 || i == 2) && j < kNPCB3[i]-1) { |
| a432117a |
445 | GetEnvelopes(4)->AddEnvelopeConstituent("S05C", idSlatCh5, 2*index-1,TGeoTranslation(xx2,0.,zPanel)); |
| 446 | GetEnvelopes(4)->AddEnvelopeConstituent("S05C", idSlatCh5, 2*index,TGeoTranslation(xx2,0.,-zPanel)); |
| 447 | GetEnvelopes(4)->AddEnvelopeConstituent("S05I", idSlatCh5, index,TGeoTranslation(xx2,0.,0.)); |
| c10e6eaf |
448 | } |
| 449 | else { |
| a432117a |
450 | GetEnvelopes(4)->AddEnvelopeConstituent("S05C", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 451 | GetEnvelopes(4)->AddEnvelopeConstituent("S05C", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 452 | GetEnvelopes(4)->AddEnvelopeConstituent("S05I", idSlatCh5, index,TGeoTranslation(xx,0.,0.)); |
| c10e6eaf |
453 | } |
| a432117a |
454 | GetEnvelopes(5)->AddEnvelopeConstituent("S06C", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 455 | GetEnvelopes(5)->AddEnvelopeConstituent("S06C", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 456 | GetEnvelopes(5)->AddEnvelopeConstituent("S06I", idSlatCh6, index,TGeoTranslation(xx,0.,0.)); |
| d1cd2474 |
457 | |
| c10e6eaf |
458 | } |
| 459 | } |
| d1cd2474 |
460 | } |
| c10e6eaf |
461 | |
| d1cd2474 |
462 | // position the rohacell volume inside the panel volume |
| 463 | gMC->Gspos("S05R",1,"S05C",0.,0.,0.,0,"ONLY"); |
| 464 | gMC->Gspos("SB5R",1,"SB5C",0.,0.,0.,0,"ONLY"); |
| 465 | gMC->Gspos("S06R",1,"S06C",0.,0.,0.,0,"ONLY"); |
| 466 | |
| 467 | // position the PCB volume inside the insulating material volume |
| 468 | gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY"); |
| 469 | gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY"); |
| 470 | gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY"); |
| 471 | // position the horizontal frame volume inside the PCB volume |
| 472 | gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY"); |
| 473 | gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY"); |
| 474 | gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY"); |
| 475 | // position the sensitive volume inside the horizontal frame volume |
| 476 | gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3); |
| 477 | gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3); |
| 478 | gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3); |
| 479 | // position the border volumes inside the PCB volume |
| 2057e0cc |
480 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
| d1cd2474 |
481 | gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY"); |
| 482 | gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY"); |
| 483 | gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY"); |
| 484 | gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY"); |
| 485 | gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY"); |
| 486 | gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY"); |
| 487 | |
| 488 | // create the NULOC volume and position it in the horizontal frame |
| 489 | |
| 2057e0cc |
490 | gMC->Gsvolu("S05N","BOX",kNulocMaterial,nulocpar,3); |
| 491 | gMC->Gsvolu("S06N","BOX",kNulocMaterial,nulocpar,3); |
| d1cd2474 |
492 | index = 0; |
| 493 | Float_t xxmax2 = xxmax - 5./2.; |
| c10e6eaf |
494 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
| d1cd2474 |
495 | index++; |
| 2057e0cc |
496 | gMC->Gspos("S05N",2*index-1,"S05B", xx, 0.,-kBframeWidth/4., 0, "ONLY"); |
| 497 | gMC->Gspos("S05N",2*index ,"S05B", xx, 0., kBframeWidth/4., 0, "ONLY"); |
| d1cd2474 |
498 | if (xx > -xxmax2 && xx< xxmax2) { |
| 2057e0cc |
499 | gMC->Gspos("S05N",2*index-1,"SB5B", xx, 0.,-kBframeWidth/4., 0, "ONLY"); |
| 500 | gMC->Gspos("S05N",2*index ,"SB5B", xx, 0., kBframeWidth/4., 0, "ONLY"); |
| d1cd2474 |
501 | } |
| 2057e0cc |
502 | gMC->Gspos("S06N",2*index-1,"S06B", xx, 0.,-kBframeWidth/4., 0, "ONLY"); |
| 503 | gMC->Gspos("S06N",2*index ,"S06B", xx, 0., kBframeWidth/4., 0, "ONLY"); |
| d1cd2474 |
504 | } |
| d1cd2474 |
505 | // position the volumes approximating the circular section of the pipe |
| 2057e0cc |
506 | Float_t yoffs = kSensHeight/2.-kYoverlap; |
| d1cd2474 |
507 | Float_t epsilon = 0.001; |
| c10e6eaf |
508 | Int_t ndiv = 6; |
| d1cd2474 |
509 | Double_t divpar[3]; |
| 2057e0cc |
510 | Double_t dydiv= kSensHeight/ndiv; |
| c10e6eaf |
511 | Double_t ydiv = yoffs -dydiv/2.; |
| 512 | Int_t imax = 0; |
| d1cd2474 |
513 | imax = 1; |
| c10e6eaf |
514 | Double_t rmin = 31.5; // Corrected in sep04 from PQ-LAT-SR2 de CEA-DSM-DAPNIA-SIS/BE ph HARDY 19-Oct-2002 slat |
| 515 | Double_t xdiv = 0.; |
| 516 | for (Int_t idiv = 0;idiv < ndiv; idiv++){ |
| 517 | ydiv += dydiv; |
| 518 | xdiv = 0.; |
| 519 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ); |
| 2057e0cc |
520 | divpar[0] = (kPcbLength-xdiv)/2.; |
| d1cd2474 |
521 | divpar[1] = dydiv/2. - epsilon; |
| 2057e0cc |
522 | divpar[2] = kSensWidth/2.; |
| c10e6eaf |
523 | Float_t xvol = (kPcbLength+xdiv)/2.; |
| 524 | Float_t yvol = ydiv; |
| 525 | // Volumes close to the beam pipe for slat i=1 so 4 slats per chamber |
| 526 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 527 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(1,quadrant,kNslats3-1)); |
| 528 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(1,quadrant,kNslats3-1)); |
| 529 | |
| a432117a |
530 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5, quadrant*100+imax+4*idiv+1, |
| c10e6eaf |
531 | TGeoTranslation(xvol-(kPcbLength * (kNPCB3[1]-1)/2. + 35./2.),yvol-kPcbLength+kYoverlap,0.),3,divpar); |
| 532 | |
| a432117a |
533 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6, quadrant*100+imax+4*idiv+1, |
| c10e6eaf |
534 | TGeoTranslation(xvol-kPcbLength * kNPCB3[1]/2.,yvol-kPcbLength+kYoverlap,0.),3,divpar); |
| d1cd2474 |
535 | } |
| d1cd2474 |
536 | } |
| c10e6eaf |
537 | |
| 538 | // Volumes close to the beam pipe for slat i=0 so 2 slats per chamber (Lattes centrales de la station 3) |
| 539 | // Gines Martinez, Subatech sep 04 |
| 540 | // 9 box volumes are used to define the PCB closed to the beam pipe of the slat 122000SR1 of chamber 5 and 6 of St3 |
| 541 | // Cette code a ete ecrit suivant le plan PQ-LAT-SR1 de CEA-DSM-DAPNIA-SIS/BE ph HARDY 8-Oct-2002 |
| 542 | // Rmin = 31.5 cm |
| 543 | Double_t rmin_122000SR1 = 31.5; //in cm |
| 544 | ndiv = 9; |
| 545 | dydiv = kSensHeight/ndiv; // Vertical size of the box volume approximating the rounded PCB |
| 546 | ydiv = -kSensHeight/2 + dydiv/2.-kYoverlap; // Initializing vertical position of the volume from bottom |
| 547 | xdiv = 0.; // Initializing horizontal position of the box volumes |
| 548 | for (Int_t idiv=0;idiv<ndiv; idiv++){ |
| 549 | xdiv = TMath::Abs( rmin_122000SR1 * TMath::Sin( TMath::ACos(ydiv/rmin_122000SR1) ) ); |
| 550 | divpar[0] = (kPcbLength-xdiv)/2.; // Dimension of the box volume |
| 551 | divpar[1] = dydiv/2. - epsilon; |
| 552 | divpar[2] = kSensWidth/2.; |
| 553 | Float_t xvol = (kPcbLength+xdiv)/2.; //2D traslition for positionning of box volume |
| 554 | Float_t yvol = ydiv; |
| 555 | Int_t side; |
| 556 | for (side = 1; side <= 2; side++) { |
| 557 | sprintf(idSlatCh5,"LA%d",4); |
| 558 | sprintf(idSlatCh6,"LB%d",4); |
| 559 | if(side == 2) { |
| 560 | sprintf(idSlatCh5,"LA%d",13); |
| 561 | sprintf(idSlatCh6,"LB%d",13); |
| 562 | } |
| a432117a |
563 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5,500+side*100+imax+4*idiv+1, |
| c10e6eaf |
564 | TGeoTranslation(xvol-(kPcbLength * (kNPCB3[0]-1)/2. + 35./2.),yvol+kYoverlap,0.),3,divpar); |
| 565 | |
| a432117a |
566 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6,500+side*100+imax+4*idiv+1, |
| c10e6eaf |
567 | TGeoTranslation(xvol-kPcbLength * kNPCB3[0]/2.,yvol+kYoverlap,0.),3,divpar); |
| 568 | } |
| 569 | ydiv += dydiv; // Going from bottom to top |
| 570 | } |
| a432117a |
571 | // cout << "Geometry for Station 3...... done" << endl; |
| d1cd2474 |
572 | } |
| 573 | |
| 574 | if (fStations[3]) { |
| 575 | |
| 576 | |
| 577 | // //******************************************************************** |
| 578 | // // Station 4 ** |
| 579 | // //******************************************************************** |
| 580 | // // indices 1 and 2 for first and second chambers in the station |
| 581 | // // iChamber (first chamber) kept for other quanties than Z, |
| 582 | // // assumed to be the same in both chambers |
| c10e6eaf |
583 | // corrected geometry (JP. Cussonneau, Ch. Finck) |
| d1cd2474 |
584 | |
| 585 | iChamber = GetChamber(6); |
| 586 | iChamber1 = iChamber; |
| 587 | iChamber2 = GetChamber(7); |
| 588 | |
| c10e6eaf |
589 | const Int_t kNslats4 = 7; // number of slats per quadrant |
| 590 | const Int_t kNPCB4[kNslats4] = {5,6,5,5,4,3,2}; // n PCB per slat |
| 591 | const Float_t kXpos4[kNslats4] = {38.5, 0., 0., 0., 0., 0., 0.}; |
| 2057e0cc |
592 | Float_t slatLength4[kNslats4]; |
| d1cd2474 |
593 | |
| 594 | // // create and position the slat (mother) volumes |
| 595 | |
| 596 | char idSlatCh7[5]; |
| 597 | char idSlatCh8[5]; |
| 598 | Float_t xSlat4; |
| 599 | Float_t ySlat4; |
| 600 | angle = 0.; |
| 601 | |
| 2057e0cc |
602 | for (i = 0; i<kNslats4; i++){ |
| 603 | slatLength4[i] = kPcbLength * kNPCB4[i] + 2. * kDslatLength; |
| 604 | xSlat4 = slatLength4[i]/2. - kVframeLength/2. + kXpos4[i]; |
| c10e6eaf |
605 | if (i == 1) slatLength4[i] -= 2. *kDslatLength; // frame out in PCB with circular border |
| 606 | ySlat4 = kSensHeight * i - kYoverlap *i; |
| d1cd2474 |
607 | |
| 608 | spar[0] = slatLength4[i]/2.; |
| 2057e0cc |
609 | spar[1] = kSlatHeight/2.; |
| 610 | spar[2] = kSlatWidth/2.*1.01; |
| c10e6eaf |
611 | Float_t dzCh4 = spar[2]*1.01; |
| d1cd2474 |
612 | // zSlat to be checked (odd downstream or upstream?) |
| 613 | Float_t zSlat = (i%2 ==0)? spar[2] : -spar[2]; |
| 614 | |
| 2057e0cc |
615 | sprintf(idSlatCh7,"LC%d",kNslats4-1+i); |
| 616 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| a432117a |
617 | detElemId = 700 + i + kNslats4-1; |
| 618 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat4, zSlat+2.*dzCh4), |
| c10e6eaf |
619 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
| d1cd2474 |
620 | |
| 2057e0cc |
621 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2+i); |
| 622 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| a432117a |
623 | detElemId = 750 + i + kNslats4-1; |
| 624 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat4, zSlat-2.*dzCh4), |
| c10e6eaf |
625 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
| d1cd2474 |
626 | |
| c10e6eaf |
627 | if (i > 0) { |
| 628 | sprintf(idSlatCh7,"LC%d",kNslats4-1-i); |
| c10e6eaf |
629 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| a432117a |
630 | detElemId = 700 - i + kNslats4-1; |
| 631 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat4, zSlat+2.*dzCh4), |
| c10e6eaf |
632 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
| 633 | |
| 634 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2-i); |
| a432117a |
635 | detElemId = 750 - i + kNslats4-1; |
| c10e6eaf |
636 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| a432117a |
637 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, |
| c10e6eaf |
638 | TGeoTranslation(-xSlat4, -ySlat4, zSlat-2.*dzCh4), |
| 639 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
| d1cd2474 |
640 | } |
| 641 | |
| 2057e0cc |
642 | sprintf(idSlatCh8,"LD%d",kNslats4-1+i); |
| 643 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| a432117a |
644 | detElemId = 800 + i + kNslats4-1; |
| 645 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat4, zSlat+2.*dzCh4), |
| c10e6eaf |
646 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
| a432117a |
647 | |
| 2057e0cc |
648 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2+i); |
| a432117a |
649 | detElemId = 850 + i + kNslats4-1; |
| 2057e0cc |
650 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| a432117a |
651 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat4, zSlat-2.*dzCh4), |
| c10e6eaf |
652 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
| 653 | if (i > 0) { |
| 654 | sprintf(idSlatCh8,"LD%d",kNslats4-1-i); |
| a432117a |
655 | detElemId = 800 - i + kNslats4-1; |
| c10e6eaf |
656 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| a432117a |
657 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat4, zSlat+2.*dzCh4), |
| c10e6eaf |
658 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
| 659 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2-i); |
| a432117a |
660 | detElemId = 850 - i + kNslats4-1; |
| c10e6eaf |
661 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| a432117a |
662 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat4, zSlat-2.*dzCh4), |
| c10e6eaf |
663 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
| d1cd2474 |
664 | } |
| 665 | } |
| 666 | |
| d1cd2474 |
667 | // create the panel volume |
| 668 | |
| 2057e0cc |
669 | gMC->Gsvolu("S07C","BOX",kPanelMaterial,panelpar,3); |
| 670 | gMC->Gsvolu("S08C","BOX",kPanelMaterial,panelpar,3); |
| d1cd2474 |
671 | |
| 672 | // create the rohacell volume |
| 673 | |
| 2057e0cc |
674 | gMC->Gsvolu("S07R","BOX",kRohaMaterial,rohapar,3); |
| 675 | gMC->Gsvolu("S08R","BOX",kRohaMaterial,rohapar,3); |
| d1cd2474 |
676 | |
| 677 | // create the insulating material volume |
| 678 | |
| 2057e0cc |
679 | gMC->Gsvolu("S07I","BOX",kInsuMaterial,insupar,3); |
| 680 | gMC->Gsvolu("S08I","BOX",kInsuMaterial,insupar,3); |
| d1cd2474 |
681 | |
| 682 | // create the PCB volume |
| 683 | |
| 2057e0cc |
684 | gMC->Gsvolu("S07P","BOX",kPcbMaterial,pcbpar,3); |
| 685 | gMC->Gsvolu("S08P","BOX",kPcbMaterial,pcbpar,3); |
| d1cd2474 |
686 | |
| 687 | // create the sensitive volumes, |
| 688 | |
| 2057e0cc |
689 | gMC->Gsvolu("S07G","BOX",kSensMaterial,dum,0); |
| 690 | gMC->Gsvolu("S08G","BOX",kSensMaterial,dum,0); |
| d1cd2474 |
691 | |
| 692 | // create the vertical frame volume |
| 693 | |
| 2057e0cc |
694 | gMC->Gsvolu("S07V","BOX",kVframeMaterial,vFramepar,3); |
| 695 | gMC->Gsvolu("S08V","BOX",kVframeMaterial,vFramepar,3); |
| d1cd2474 |
696 | |
| 697 | // create the horizontal frame volume |
| 698 | |
| 2057e0cc |
699 | gMC->Gsvolu("S07H","BOX",kHframeMaterial,hFramepar,3); |
| 700 | gMC->Gsvolu("S08H","BOX",kHframeMaterial,hFramepar,3); |
| d1cd2474 |
701 | |
| 702 | // create the horizontal border volume |
| 703 | |
| 2057e0cc |
704 | gMC->Gsvolu("S07B","BOX",kBframeMaterial,bFramepar,3); |
| 705 | gMC->Gsvolu("S08B","BOX",kBframeMaterial,bFramepar,3); |
| d1cd2474 |
706 | |
| c10e6eaf |
707 | index = 0; |
| 708 | for (i = 0; i < kNslats4; i++){ |
| 709 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| d1cd2474 |
710 | |
| c10e6eaf |
711 | if (i == 0 && quadrant == 2) continue; |
| 712 | if (i == 0 && quadrant == 4) continue; |
| d1cd2474 |
713 | |
| c10e6eaf |
714 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(i,quadrant,kNslats4-1)); |
| 715 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(i,quadrant,kNslats4-1)); |
| 716 | Float_t xvFrame = (slatLength4[i] - kVframeLength)/2.; |
| d1cd2474 |
717 | |
| c10e6eaf |
718 | // position the vertical frames |
| 719 | if (i != 1 && i != 0) { |
| a432117a |
720 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 721 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 722 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 723 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| c10e6eaf |
724 | } |
| 725 | // position the panels and the insulating material |
| 726 | for (j = 0; j < kNPCB4[i]; j++){ |
| 727 | if (i == 1 && j == 0) continue; |
| 728 | index++; |
| 729 | Float_t xx = kSensLength * (-kNPCB4[i]/2.+j+.5); |
| 730 | |
| 731 | Float_t zPanel = spar[2] - panelpar[2]; |
| a432117a |
732 | GetEnvelopes(6)->AddEnvelopeConstituent("S07C", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 733 | GetEnvelopes(6)->AddEnvelopeConstituent("S07C", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 734 | GetEnvelopes(6)->AddEnvelopeConstituent("S07I", idSlatCh7, index,TGeoTranslation(xx,0.,0.)); |
| 735 | GetEnvelopes(7)->AddEnvelopeConstituent("S08C", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 736 | GetEnvelopes(7)->AddEnvelopeConstituent("S08C", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 737 | GetEnvelopes(7)->AddEnvelopeConstituent("S08I", idSlatCh8, index,TGeoTranslation(xx,0.,0.)); |
| c10e6eaf |
738 | } |
| 739 | } |
| d1cd2474 |
740 | } |
| 741 | |
| 742 | // position the rohacell volume inside the panel volume |
| 743 | gMC->Gspos("S07R",1,"S07C",0.,0.,0.,0,"ONLY"); |
| 744 | gMC->Gspos("S08R",1,"S08C",0.,0.,0.,0,"ONLY"); |
| 745 | |
| 746 | // position the PCB volume inside the insulating material volume |
| 747 | gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY"); |
| 748 | gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY"); |
| 749 | // position the horizontal frame volume inside the PCB volume |
| 750 | gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY"); |
| 751 | gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY"); |
| 752 | // position the sensitive volume inside the horizontal frame volume |
| 753 | gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3); |
| 754 | gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3); |
| 755 | // position the border volumes inside the PCB volume |
| 2057e0cc |
756 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
| d1cd2474 |
757 | gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY"); |
| 758 | gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY"); |
| 759 | gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY"); |
| 760 | gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY"); |
| 761 | |
| 762 | // // create the NULOC volume and position it in the horizontal frame |
| 763 | |
| 2057e0cc |
764 | gMC->Gsvolu("S07N","BOX",kNulocMaterial,nulocpar,3); |
| 765 | gMC->Gsvolu("S08N","BOX",kNulocMaterial,nulocpar,3); |
| d1cd2474 |
766 | index = 0; |
| c10e6eaf |
767 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
| d1cd2474 |
768 | index++; |
| 2057e0cc |
769 | gMC->Gspos("S07N",2*index-1,"S07B", xx, 0.,-kBframeWidth/4., 0, "ONLY"); |
| 770 | gMC->Gspos("S07N",2*index ,"S07B", xx, 0., kBframeWidth/4., 0, "ONLY"); |
| 771 | gMC->Gspos("S08N",2*index-1,"S08B", xx, 0.,-kBframeWidth/4., 0, "ONLY"); |
| 772 | gMC->Gspos("S08N",2*index ,"S08B", xx, 0., kBframeWidth/4., 0, "ONLY"); |
| d1cd2474 |
773 | } |
| 774 | |
| 775 | // // position the volumes approximating the circular section of the pipe |
| 2057e0cc |
776 | Float_t yoffs = kSensHeight/2. - kYoverlap; |
| d1cd2474 |
777 | Float_t epsilon = 0.001; |
| 6296ba34 |
778 | Int_t ndiv = 10; |
| d1cd2474 |
779 | Double_t divpar[3]; |
| 2057e0cc |
780 | Double_t dydiv= kSensHeight/ndiv; |
| d1cd2474 |
781 | Double_t ydiv = yoffs -dydiv; |
| 782 | Int_t imax=0; |
| 783 | imax = 1; |
| 6296ba34 |
784 | Float_t rmin = 39.5; |
| 785 | Float_t shiftR = 0.; |
| c10e6eaf |
786 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
| 787 | ydiv += dydiv; |
| d1cd2474 |
788 | Float_t xdiv = 0.; |
| c10e6eaf |
789 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ); |
| 6296ba34 |
790 | divpar[0] = (kPcbLength-xdiv-shiftR)/2.; |
| d1cd2474 |
791 | divpar[1] = dydiv/2. - epsilon; |
| 2057e0cc |
792 | divpar[2] = kSensWidth/2.; |
| 6296ba34 |
793 | Float_t xvol = (kPcbLength+xdiv)/2.+shiftR; |
| c10e6eaf |
794 | Float_t yvol = ydiv + dydiv/2.; |
| 6296ba34 |
795 | |
| c10e6eaf |
796 | for (Int_t quadrant=1; quadrant<=4; quadrant++) { |
| 797 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(1,quadrant,kNslats4-1)); |
| 798 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(1,quadrant,kNslats4-1)); |
| 6296ba34 |
799 | |
| a432117a |
800 | GetEnvelopes(6)->AddEnvelopeConstituentParam("S07G",idSlatCh7, quadrant*100+imax+4*idiv+1, |
| 6296ba34 |
801 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength+kYoverlap,0.),3,divpar); |
| 802 | |
| a432117a |
803 | GetEnvelopes(7)->AddEnvelopeConstituentParam("S08G", idSlatCh8, quadrant*100+imax+4*idiv+1, |
| 6296ba34 |
804 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength+kYoverlap,0.),3,divpar); |
| d1cd2474 |
805 | } |
| 806 | } |
| a432117a |
807 | // cout << "Geometry for Station 4...... done" << endl; |
| d1cd2474 |
808 | |
| 809 | } |
| 810 | |
| 811 | if (fStations[4]) { |
| 6296ba34 |
812 | |
| d1cd2474 |
813 | |
| 814 | // //******************************************************************** |
| 815 | // // Station 5 ** |
| 816 | // //******************************************************************** |
| 817 | // // indices 1 and 2 for first and second chambers in the station |
| 818 | // // iChamber (first chamber) kept for other quanties than Z, |
| 819 | // // assumed to be the same in both chambers |
| c10e6eaf |
820 | // corrected geometry (JP. Cussonneau, Ch. Finck) |
| d1cd2474 |
821 | |
| 822 | iChamber = GetChamber(8); |
| 823 | iChamber1 = iChamber; |
| 824 | iChamber2 = GetChamber(9); |
| 825 | |
| 2057e0cc |
826 | const Int_t kNslats5 = 7; // number of slats per quadrant |
| c10e6eaf |
827 | const Int_t kNPCB5[kNslats5] = {5,6,6,6,5,4,3}; // n PCB per slat |
| 828 | const Float_t kXpos5[kNslats5] = {38.5, 0., 0., 0., 0., 0., 0.}; |
| 2057e0cc |
829 | Float_t slatLength5[kNslats5]; |
| d1cd2474 |
830 | |
| 831 | // // create and position the slat (mother) volumes |
| 832 | |
| 833 | char idSlatCh9[5]; |
| 834 | char idSlatCh10[5]; |
| 835 | Float_t xSlat5; |
| 836 | Float_t ySlat5; |
| 837 | angle = 0.; |
| 838 | |
| c10e6eaf |
839 | for (i = 0; i < kNslats5; i++){ |
| 2057e0cc |
840 | slatLength5[i] = kPcbLength * kNPCB5[i] + 2. * kDslatLength; |
| 841 | xSlat5 = slatLength5[i]/2. - kVframeLength/2. +kXpos5[i]; |
| c10e6eaf |
842 | if (i == 1 || i == 0) slatLength5[i] -= 2. *kDslatLength; // frame out in PCB with circular border |
| 2057e0cc |
843 | ySlat5 = kSensHeight * i - kYoverlap * i; |
| d1cd2474 |
844 | |
| 845 | spar[0] = slatLength5[i]/2.; |
| 2057e0cc |
846 | spar[1] = kSlatHeight/2.; |
| 847 | spar[2] = kSlatWidth/2. * 1.01; |
| c10e6eaf |
848 | Float_t dzCh5 = spar[2]*1.01; |
| d1cd2474 |
849 | // zSlat to be checked (odd downstream or upstream?) |
| 850 | Float_t zSlat = (i%2 ==0)? -spar[2] : spar[2]; |
| 851 | |
| 2057e0cc |
852 | sprintf(idSlatCh9,"LE%d",kNslats5-1+i); |
| a432117a |
853 | detElemId = 900 + i + kNslats5-1; |
| 2057e0cc |
854 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| a432117a |
855 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, zSlat+2.*dzCh5), |
| c10e6eaf |
856 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
| d1cd2474 |
857 | |
| 2057e0cc |
858 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2+i); |
| a432117a |
859 | detElemId = 950 + i + kNslats5-1; |
| 2057e0cc |
860 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| a432117a |
861 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat-2.*dzCh5), |
| c10e6eaf |
862 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
| d1cd2474 |
863 | |
| c10e6eaf |
864 | if (i > 0) { |
| 865 | sprintf(idSlatCh9,"LE%d",kNslats5-1-i); |
| a432117a |
866 | detElemId = 900 - i + kNslats5-1; |
| c10e6eaf |
867 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| a432117a |
868 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, zSlat+2.*dzCh5), |
| c10e6eaf |
869 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
| 870 | |
| 871 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2-i); |
| a432117a |
872 | detElemId = 950 - i + kNslats5-1; |
| c10e6eaf |
873 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| a432117a |
874 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat-2.*dzCh5), |
| c10e6eaf |
875 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
| d1cd2474 |
876 | } |
| 877 | |
| 2057e0cc |
878 | sprintf(idSlatCh10,"LF%d",kNslats5-1+i); |
| a432117a |
879 | detElemId = 1000 + i + kNslats5-1; |
| 2057e0cc |
880 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| a432117a |
881 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, zSlat+2.*dzCh5), |
| c10e6eaf |
882 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
| d1cd2474 |
883 | |
| 2057e0cc |
884 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2+i); |
| a432117a |
885 | detElemId = 1050 + i + kNslats5-1; |
| 2057e0cc |
886 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| a432117a |
887 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat-2.*dzCh5), |
| c10e6eaf |
888 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
| 889 | |
| 890 | if (i > 0) { |
| 891 | sprintf(idSlatCh10,"LF%d",kNslats5-1-i); |
| a432117a |
892 | detElemId = 1000 - i + kNslats5-1; |
| c10e6eaf |
893 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| a432117a |
894 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, zSlat+2.*dzCh5), |
| c10e6eaf |
895 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
| 896 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2-i); |
| a432117a |
897 | detElemId = 1050 - i + kNslats5-1; |
| c10e6eaf |
898 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| a432117a |
899 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat-2.*dzCh5), |
| c10e6eaf |
900 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
| 901 | } |
| d1cd2474 |
902 | } |
| c10e6eaf |
903 | // // create the panel volume |
| d1cd2474 |
904 | |
| 2057e0cc |
905 | gMC->Gsvolu("S09C","BOX",kPanelMaterial,panelpar,3); |
| 906 | gMC->Gsvolu("S10C","BOX",kPanelMaterial,panelpar,3); |
| d1cd2474 |
907 | |
| 908 | // create the rohacell volume |
| 909 | |
| 2057e0cc |
910 | gMC->Gsvolu("S09R","BOX",kRohaMaterial,rohapar,3); |
| 911 | gMC->Gsvolu("S10R","BOX",kRohaMaterial,rohapar,3); |
| d1cd2474 |
912 | |
| 913 | // create the insulating material volume |
| 914 | |
| 2057e0cc |
915 | gMC->Gsvolu("S09I","BOX",kInsuMaterial,insupar,3); |
| 916 | gMC->Gsvolu("S10I","BOX",kInsuMaterial,insupar,3); |
| d1cd2474 |
917 | |
| 918 | // create the PCB volume |
| 919 | |
| 2057e0cc |
920 | gMC->Gsvolu("S09P","BOX",kPcbMaterial,pcbpar,3); |
| 921 | gMC->Gsvolu("S10P","BOX",kPcbMaterial,pcbpar,3); |
| d1cd2474 |
922 | |
| 923 | // create the sensitive volumes, |
| 924 | |
| 2057e0cc |
925 | gMC->Gsvolu("S09G","BOX",kSensMaterial,dum,0); |
| 926 | gMC->Gsvolu("S10G","BOX",kSensMaterial,dum,0); |
| d1cd2474 |
927 | |
| 928 | // create the vertical frame volume |
| 929 | |
| 2057e0cc |
930 | gMC->Gsvolu("S09V","BOX",kVframeMaterial,vFramepar,3); |
| 931 | gMC->Gsvolu("S10V","BOX",kVframeMaterial,vFramepar,3); |
| d1cd2474 |
932 | |
| 933 | // create the horizontal frame volume |
| 934 | |
| 2057e0cc |
935 | gMC->Gsvolu("S09H","BOX",kHframeMaterial,hFramepar,3); |
| 936 | gMC->Gsvolu("S10H","BOX",kHframeMaterial,hFramepar,3); |
| d1cd2474 |
937 | |
| 938 | // create the horizontal border volume |
| 939 | |
| 2057e0cc |
940 | gMC->Gsvolu("S09B","BOX",kBframeMaterial,bFramepar,3); |
| 941 | gMC->Gsvolu("S10B","BOX",kBframeMaterial,bFramepar,3); |
| d1cd2474 |
942 | |
| c10e6eaf |
943 | index = 0; |
| 944 | for (i = 0; i < kNslats5; i++){ |
| 945 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| d1cd2474 |
946 | |
| c10e6eaf |
947 | if (i == 0 && quadrant == 2) continue; |
| 948 | if (i == 0 && quadrant == 4) continue; |
| d1cd2474 |
949 | |
| c10e6eaf |
950 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(i,quadrant,kNslats5-1)); |
| 951 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(i,quadrant,kNslats5-1)); |
| 952 | Float_t xvFrame = (slatLength5[i] - kVframeLength)/2.; |
| d1cd2474 |
953 | |
| c10e6eaf |
954 | // position the vertical frames |
| 955 | if (i!=1 && i!=0) { |
| a432117a |
956 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 957 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 958 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 959 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| c10e6eaf |
960 | } |
| d1cd2474 |
961 | |
| c10e6eaf |
962 | // position the panels and the insulating material |
| 963 | for (j = 0; j < kNPCB5[i]; j++){ |
| 964 | if (i == 1 && j == 0) continue; |
| 965 | index++; |
| 966 | Float_t xx = kSensLength * (-kNPCB5[i]/2.+j+.5); |
| 967 | |
| 968 | Float_t zPanel = spar[2] - panelpar[2]; |
| a432117a |
969 | GetEnvelopes(8)->AddEnvelopeConstituent("S09C", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 970 | GetEnvelopes(8)->AddEnvelopeConstituent("S09C", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 971 | GetEnvelopes(8)->AddEnvelopeConstituent("S09I", idSlatCh9, index,TGeoTranslation(xx,0.,0.)); |
| 972 | GetEnvelopes(9)->AddEnvelopeConstituent("S10C", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 973 | GetEnvelopes(9)->AddEnvelopeConstituent("S10C", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 974 | GetEnvelopes(9)->AddEnvelopeConstituent("S10I", idSlatCh10, index,TGeoTranslation(xx,0.,0.)); |
| c10e6eaf |
975 | } |
| 976 | } |
| d1cd2474 |
977 | } |
| 978 | |
| 979 | // position the rohacell volume inside the panel volume |
| 980 | gMC->Gspos("S09R",1,"S09C",0.,0.,0.,0,"ONLY"); |
| 981 | gMC->Gspos("S10R",1,"S10C",0.,0.,0.,0,"ONLY"); |
| 982 | |
| 983 | // position the PCB volume inside the insulating material volume |
| 984 | gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY"); |
| 985 | gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY"); |
| 986 | // position the horizontal frame volume inside the PCB volume |
| 987 | gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY"); |
| 988 | gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY"); |
| 989 | // position the sensitive volume inside the horizontal frame volume |
| 990 | gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3); |
| 991 | gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3); |
| 992 | // position the border volumes inside the PCB volume |
| 2057e0cc |
993 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
| d1cd2474 |
994 | gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY"); |
| 995 | gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY"); |
| 996 | gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY"); |
| 997 | gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY"); |
| 998 | |
| c10e6eaf |
999 | // // create the NULOC volume and position it in the horizontal frame |
| d1cd2474 |
1000 | |
| 2057e0cc |
1001 | gMC->Gsvolu("S09N","BOX",kNulocMaterial,nulocpar,3); |
| 1002 | gMC->Gsvolu("S10N","BOX",kNulocMaterial,nulocpar,3); |
| d1cd2474 |
1003 | index = 0; |
| c10e6eaf |
1004 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
| d1cd2474 |
1005 | index++; |
| 2057e0cc |
1006 | gMC->Gspos("S09N",2*index-1,"S09B", xx, 0.,-kBframeWidth/4., 0, "ONLY"); |
| 1007 | gMC->Gspos("S09N",2*index ,"S09B", xx, 0., kBframeWidth/4., 0, "ONLY"); |
| 1008 | gMC->Gspos("S10N",2*index-1,"S10B", xx, 0.,-kBframeWidth/4., 0, "ONLY"); |
| 1009 | gMC->Gspos("S10N",2*index ,"S10B", xx, 0., kBframeWidth/4., 0, "ONLY"); |
| d1cd2474 |
1010 | } |
| 1011 | |
| c10e6eaf |
1012 | // // position the volumes approximating the circular section of the pipe |
| 2057e0cc |
1013 | Float_t yoffs = kSensHeight/2. - kYoverlap; |
| d1cd2474 |
1014 | Float_t epsilon = 0.001; |
| 6296ba34 |
1015 | Int_t ndiv = 10; |
| d1cd2474 |
1016 | Double_t divpar[3]; |
| c10e6eaf |
1017 | Double_t dydiv = kSensHeight/ndiv; |
| d1cd2474 |
1018 | Double_t ydiv = yoffs -dydiv; |
| c10e6eaf |
1019 | Int_t imax = 0; |
| 2057e0cc |
1020 | // for (Int_t islat=0; islat<kNslats3; islat++) imax += kNPCB3[islat]; |
| d1cd2474 |
1021 | imax = 1; |
| 6296ba34 |
1022 | Float_t rmin = 40.; |
| 1023 | Float_t shiftR = 0.; |
| c10e6eaf |
1024 | for (Int_t idiv = 0;idiv < ndiv; idiv++){ |
| 1025 | ydiv += dydiv; |
| d1cd2474 |
1026 | Float_t xdiv = 0.; |
| c10e6eaf |
1027 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ); |
| 6296ba34 |
1028 | divpar[0] = (kPcbLength-xdiv-shiftR)/2.; |
| d1cd2474 |
1029 | divpar[1] = dydiv/2. - epsilon; |
| 2057e0cc |
1030 | divpar[2] = kSensWidth/2.; |
| 6296ba34 |
1031 | Float_t xvol = (kPcbLength+xdiv)/2.+ shiftR; |
| c10e6eaf |
1032 | Float_t yvol = ydiv + dydiv/2.; |
| d1cd2474 |
1033 | |
| c10e6eaf |
1034 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 1035 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(1,quadrant,kNslats5-1)); |
| 1036 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(1,quadrant,kNslats5-1)); |
| d1cd2474 |
1037 | |
| a432117a |
1038 | GetEnvelopes(8)->AddEnvelopeConstituentParam("S09G", idSlatCh9, quadrant*100+imax+4*idiv+1, |
| 6296ba34 |
1039 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength+kYoverlap,0.),3,divpar); |
| a432117a |
1040 | GetEnvelopes(9)->AddEnvelopeConstituentParam("S10G", idSlatCh10, quadrant*100+imax+4*idiv+1, |
| 6296ba34 |
1041 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength+kYoverlap,0.),3,divpar); |
| d1cd2474 |
1042 | } |
| 1043 | } |
| a432117a |
1044 | // cout << "Geometry for Station 5...... done" << endl; |
| d1cd2474 |
1045 | |
| 1046 | } |
| 1047 | } |
| 1048 | |
| 1049 | |
| 1050 | //______________________________________________________________________________ |
| 1051 | void AliMUONSlatGeometryBuilder::SetTransformations() |
| 1052 | { |
| 1053 | // Defines the transformations for the station2 chambers. |
| 1054 | // --- |
| 1055 | |
| 1056 | AliMUONChamber* iChamber1 = GetChamber(4); |
| 1057 | Double_t zpos1 = - iChamber1->Z(); |
| 1058 | iChamber1->GetGeometry() |
| 1059 | ->SetTranslation(TGeoTranslation(0., 0., zpos1)); |
| 1060 | |
| 1061 | AliMUONChamber* iChamber2 = GetChamber(5); |
| 1062 | Double_t zpos2 = - iChamber2->Z(); |
| 1063 | iChamber2->GetGeometry() |
| 1064 | ->SetTranslation(TGeoTranslation(0., 0., zpos2)); |
| 1065 | |
| 1066 | iChamber1 = GetChamber(6); |
| 1067 | zpos1 = - iChamber1->Z(); |
| 1068 | iChamber1->GetGeometry() |
| 1069 | ->SetTranslation(TGeoTranslation(0., 0., zpos1)); |
| 1070 | |
| 1071 | iChamber2 = GetChamber(7); |
| 1072 | zpos2 = - iChamber2->Z(); |
| 1073 | iChamber2->GetGeometry() |
| 1074 | ->SetTranslation(TGeoTranslation(0., 0., zpos2)); |
| 1075 | |
| 1076 | iChamber1 = GetChamber(8); |
| 1077 | zpos1 = - iChamber1->Z(); |
| 1078 | iChamber1->GetGeometry() |
| 1079 | ->SetTranslation(TGeoTranslation(0., 0., zpos1)); |
| 1080 | |
| 1081 | iChamber2 = GetChamber(9); |
| 1082 | zpos2 = - iChamber2->Z(); |
| 1083 | iChamber2->GetGeometry() |
| 1084 | ->SetTranslation(TGeoTranslation(0., 0., zpos2)); |
| 1085 | |
| 1086 | } |
| 1087 | |
| 1088 | //______________________________________________________________________________ |
| 1089 | void AliMUONSlatGeometryBuilder::SetSensitiveVolumes() |
| 1090 | { |
| 1091 | // Defines the sensitive volumes for slat stations chambers. |
| 1092 | // --- |
| 1093 | |
| 1094 | GetChamber(4)->GetGeometry()->SetSensitiveVolume("S05G"); |
| 1095 | GetChamber(5)->GetGeometry()->SetSensitiveVolume("S06G"); |
| 1096 | GetChamber(6)->GetGeometry()->SetSensitiveVolume("S07G"); |
| 1097 | GetChamber(7)->GetGeometry()->SetSensitiveVolume("S08G"); |
| 1098 | GetChamber(8)->GetGeometry()->SetSensitiveVolume("S09G"); |
| 1099 | GetChamber(9)->GetGeometry()->SetSensitiveVolume("S10G"); |
| 1100 | } |
| 1101 | |
| 1102 | //______________________________________________________________________________ |
| 1103 | Int_t AliMUONSlatGeometryBuilder::ConvertSlatNum(Int_t numslat, Int_t quadnum, Int_t fspq) const |
| 1104 | { |
| 2057e0cc |
1105 | // On-line function establishing the correspondance between numslat (the slat number on a particular quadrant (numslat->0....4 for St3)) |
| 1106 | // and slatnum (the slat number on the whole panel (slatnum->1...18 for St3) |
| c10e6eaf |
1107 | numslat += 1; |
| 1108 | if (quadnum==2 || quadnum==3) |
| 1109 | numslat += fspq; |
| 1110 | else |
| 1111 | numslat = fspq + 2-numslat; |
| 1112 | numslat -= 1; |
| d1cd2474 |
1113 | |
| c10e6eaf |
1114 | if (quadnum==3 || quadnum==4) numslat += 2*fspq+1; |
| 1115 | |
| 1116 | return numslat; |
| d1cd2474 |
1117 | } |
git://git.uio.no / u / mrichter / AliRoot.git / blame