]>
Commit | Line | Data |
---|---|---|
4c039060 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
6e36c0f2 | 17 | $Log$ |
2682e810 | 18 | Revision 1.22 2001/05/16 14:57:20 alibrary |
19 | New files for folders and Stack | |
20 | ||
9e1a0ddb | 21 | Revision 1.21 2001/05/10 12:28:15 jbarbosa |
22 | Repositioned the RICH modules. | |
23 | ||
449e6743 | 24 | Revision 1.20 2001/02/23 17:25:57 jbarbosa |
25 | Setters for wire sag effect and voltage values. | |
26 | ||
c4384528 | 27 | Revision 1.19 2001/02/13 20:10:22 jbarbosa |
28 | Removed call to SetNSec() (obsolete). Fixed bug in chamber initialisation (not all chambers were initialised). | |
29 | ||
2fc6393f | 30 | Revision 1.18 2000/12/20 14:07:36 jbarbosa |
31 | Removed dependencies on TGeant3 (thanks to F. Carminati and I. Hrivnacova) | |
32 | ||
5cfcdf54 | 33 | Revision 1.17 2000/12/18 17:44:29 jbarbosa |
34 | Took two lines out of output. | |
35 | ||
f2de8657 | 36 | Revision 1.16 2000/10/03 21:44:09 morsch |
37 | Use AliSegmentation and AliHit abstract base classes. | |
38 | ||
a2f7eaf6 | 39 | Revision 1.15 2000/10/02 15:54:55 jbarbosa |
40 | New default version (15 mm freon). | |
41 | ||
a2db5cde | 42 | Revision 1.14 2000/07/10 15:28:39 fca |
43 | Correction of the inheritance scheme | |
44 | ||
452a64c6 | 45 | Revision 1.13 2000/06/30 16:38:15 dibari |
46 | Test on kDebugevel | |
47 | ||
8fa8fc03 | 48 | Revision 1.12 2000/06/13 13:06:28 jbarbosa |
49 | Fixed compiling error for HP (multiple declaration) | |
50 | ||
7f36f6bc | 51 | Revision 1.11 2000/06/12 15:35:44 jbarbosa |
52 | Cleaned up version. | |
53 | ||
237c933d | 54 | Revision 1.10 2000/06/09 14:59:25 jbarbosa |
55 | New default version. No setters needed, no hits. | |
56 | ||
c71fc6da | 57 | Revision 1.9 2000/05/31 08:19:38 jbarbosa |
58 | Fixed bug in StepManager | |
59 | ||
27d40190 | 60 | Revision 1.8 2000/05/26 17:30:08 jbarbosa |
61 | Cerenkov angle now stored within cerenkov data structure. | |
62 | ||
b15cdb56 | 63 | Revision 1.7 2000/05/18 10:31:36 jbarbosa |
64 | Fixed positioning of spacers inside freon. | |
65 | Fixed positioning of proximity gap | |
66 | inside methane. | |
67 | Fixed cut on neutral particles in the StepManager. | |
68 | ||
6d31e556 | 69 | Revision 1.6 2000/04/28 11:51:58 morsch |
70 | Dimensions of arrays hits and Ckov_data corrected. | |
71 | ||
8140b37e | 72 | Revision 1.5 2000/04/19 13:28:46 morsch |
73 | Major changes in geometry (parametrised), materials (updated) and | |
74 | step manager (diagnostics) (JB, AM) | |
75 | ||
4c039060 | 76 | */ |
77 | ||
6e36c0f2 | 78 | |
79 | ||
c71fc6da | 80 | ///////////////////////////////////////////////////////////// |
81 | // Manager and hits classes for set: RICH default version // | |
82 | ///////////////////////////////////////////////////////////// | |
ddae0931 | 83 | |
84 | #include <TTUBE.h> | |
85 | #include <TNode.h> | |
86 | #include <TRandom.h> | |
87 | ||
88 | #include "AliRICHv0.h" | |
a2f7eaf6 | 89 | #include "AliSegmentation.h" |
237c933d | 90 | #include "AliRICHResponse.h" |
91 | #include "AliRICHSegmentationV0.h" | |
92 | #include "AliRICHResponseV0.h" | |
93 | #include "AliRICHGeometry.h" | |
ddae0931 | 94 | #include "AliRun.h" |
95 | #include "AliMC.h" | |
96 | #include "iostream.h" | |
97 | #include "AliCallf77.h" | |
98 | #include "AliConst.h" | |
6e36c0f2 | 99 | #include "AliPDG.h" |
ddae0931 | 100 | |
101 | ClassImp(AliRICHv0) | |
102 | ||
103 | //___________________________________________ | |
104 | AliRICHv0::AliRICHv0() : AliRICH() | |
105 | { | |
237c933d | 106 | |
107 | // Default constructor | |
108 | ||
6e36c0f2 | 109 | //fChambers = 0; |
ddae0931 | 110 | } |
111 | ||
112 | //___________________________________________ | |
113 | AliRICHv0::AliRICHv0(const char *name, const char *title) | |
114 | : AliRICH(name,title) | |
115 | { | |
c71fc6da | 116 | // |
117 | // Version 0 | |
237c933d | 118 | // Default Segmentation, no hits |
c4384528 | 119 | AliRICHSegmentationV0* segmentation = new AliRICHSegmentationV0; |
c71fc6da | 120 | // |
121 | // Segmentation parameters | |
c4384528 | 122 | segmentation->SetPadSize(0.84,0.80); |
123 | segmentation->SetDAnod(0.84/2); | |
c71fc6da | 124 | // |
125 | // Geometry parameters | |
237c933d | 126 | AliRICHGeometry* geometry = new AliRICHGeometry; |
127 | geometry->SetGapThickness(8); | |
128 | geometry->SetProximityGapThickness(.4); | |
129 | geometry->SetQuartzLength(131); | |
130 | geometry->SetQuartzWidth(126.2); | |
131 | geometry->SetQuartzThickness(.5); | |
132 | geometry->SetOuterFreonLength(131); | |
133 | geometry->SetOuterFreonWidth(40.3); | |
134 | geometry->SetInnerFreonLength(131); | |
135 | geometry->SetInnerFreonWidth(40.3); | |
a2db5cde | 136 | geometry->SetFreonThickness(1.5); |
c71fc6da | 137 | // |
138 | // Response parameters | |
c4384528 | 139 | AliRICHResponseV0* response = new AliRICHResponseV0; |
140 | response->SetSigmaIntegration(5.); | |
141 | response->SetChargeSlope(27.); | |
142 | response->SetChargeSpread(0.18, 0.18); | |
143 | response->SetMaxAdc(4096); | |
144 | response->SetAlphaFeedback(0.036); | |
145 | response->SetEIonisation(26.e-9); | |
146 | response->SetSqrtKx3(0.77459667); | |
147 | response->SetKx2(0.962); | |
148 | response->SetKx4(0.379); | |
149 | response->SetSqrtKy3(0.77459667); | |
150 | response->SetKy2(0.962); | |
151 | response->SetKy4(0.379); | |
152 | response->SetPitch(0.25); | |
153 | response->SetWireSag(0); // 1->On, 0->Off | |
154 | response->SetVoltage(2150); // Should only be 2000, 2050, 2100 or 2150 | |
c71fc6da | 155 | // |
156 | // AliRICH *RICH = (AliRICH *) gAlice->GetDetector("RICH"); | |
157 | ||
237c933d | 158 | fCkovNumber=0; |
159 | fFreonProd=0; | |
7f36f6bc | 160 | Int_t i=0; |
c71fc6da | 161 | |
237c933d | 162 | fChambers = new TObjArray(kNCH); |
7f36f6bc | 163 | for (i=0; i<kNCH; i++) { |
c71fc6da | 164 | |
2682e810 | 165 | //PH (*fChambers)[i] = new AliRICHChamber(); |
166 | fChambers->AddAt(new AliRICHChamber(), i); | |
c71fc6da | 167 | |
168 | } | |
169 | ||
7f36f6bc | 170 | for (i=0; i<kNCH; i++) { |
237c933d | 171 | SetGeometryModel(i,geometry); |
c4384528 | 172 | SetSegmentationModel(i, segmentation); |
173 | SetResponseModel(i, response); | |
8fa8fc03 | 174 | SetDebugLevel(0); |
6e36c0f2 | 175 | } |
ddae0931 | 176 | } |
177 | ||
178 | ||
6e36c0f2 | 179 | |
ddae0931 | 180 | //___________________________________________ |
181 | ||
182 | void AliRICHv0::Init() | |
183 | { | |
c71fc6da | 184 | |
9e1a0ddb | 185 | if(fDebug) { |
186 | printf("%s: *********************************** RICH_INIT ***********************************\n",ClassName()); | |
187 | printf("%s: * *\n",ClassName()); | |
188 | printf("%s: * AliRICHv0 Default version started *\n",ClassName()); | |
189 | printf("%s: * *\n",ClassName()); | |
190 | } | |
c71fc6da | 191 | |
192 | ||
a2f7eaf6 | 193 | AliSegmentation* segmentation; |
c71fc6da | 194 | AliRICHGeometry* geometry; |
195 | AliRICHResponse* response; | |
196 | ||
197 | ||
ddae0931 | 198 | // |
199 | // Initialize Tracking Chambers | |
200 | // | |
2fc6393f | 201 | for (Int_t i=0; i<kNCH; i++) { |
6e36c0f2 | 202 | //printf ("i:%d",i); |
2682e810 | 203 | //PH ( (AliRICHChamber*) (*fChambers)[i])->Init(i); |
204 | ( (AliRICHChamber*) fChambers->At(i))->Init(i); | |
6e36c0f2 | 205 | } |
ddae0931 | 206 | |
207 | // | |
208 | // Set the chamber (sensitive region) GEANT identifier | |
209 | ||
2682e810 | 210 | //PH ((AliRICHChamber*)(*fChambers)[0])->SetGid(1); |
211 | //PH ((AliRICHChamber*)(*fChambers)[1])->SetGid(2); | |
212 | //PH ((AliRICHChamber*)(*fChambers)[2])->SetGid(3); | |
213 | //PH ((AliRICHChamber*)(*fChambers)[3])->SetGid(4); | |
214 | //PH ((AliRICHChamber*)(*fChambers)[4])->SetGid(5); | |
215 | //PH ((AliRICHChamber*)(*fChambers)[5])->SetGid(6); | |
216 | //PH ((AliRICHChamber*)(*fChambers)[6])->SetGid(7); | |
217 | ||
218 | ((AliRICHChamber*)fChambers->At(0))->SetGid(1); | |
219 | ((AliRICHChamber*)fChambers->At(1))->SetGid(2); | |
220 | ((AliRICHChamber*)fChambers->At(2))->SetGid(3); | |
221 | ((AliRICHChamber*)fChambers->At(3))->SetGid(4); | |
222 | ((AliRICHChamber*)fChambers->At(4))->SetGid(5); | |
223 | ((AliRICHChamber*)fChambers->At(5))->SetGid(6); | |
224 | ((AliRICHChamber*)fChambers->At(6))->SetGid(7); | |
6e36c0f2 | 225 | |
c71fc6da | 226 | segmentation=Chamber(0).GetSegmentationModel(0); |
227 | geometry=Chamber(0).GetGeometryModel(); | |
228 | response=Chamber(0).GetResponseModel(); | |
229 | ||
449e6743 | 230 | Float_t offset = 490 + 1.276 - geometry->GetGapThickness()/2; //distance from center of mother volume to methane |
231 | Float_t deltaphi = 19.5; //phi angle between center of chambers - z direction | |
232 | Float_t deltatheta = 20; //theta angle between center of chambers - x direction | |
233 | Float_t cosphi = TMath::Cos(deltaphi*TMath::Pi()/180); | |
234 | Float_t sinphi = TMath::Sin(deltaphi*TMath::Pi()/180); | |
235 | Float_t costheta = TMath::Cos(deltatheta*TMath::Pi()/180); | |
236 | Float_t sintheta = TMath::Sin(deltatheta*TMath::Pi()/180); | |
237 | ||
238 | Float_t pos1[3]={0. , offset*cosphi , offset*sinphi}; | |
239 | Float_t pos2[3]={offset*sintheta , offset*costheta , 0. }; | |
240 | Float_t pos3[3]={0. , offset , 0.}; | |
241 | Float_t pos4[3]={-offset*sintheta , offset*costheta , 0.}; | |
242 | Float_t pos5[3]={offset*sinphi , offset*costheta*cosphi, -offset*sinphi}; | |
243 | Float_t pos6[3]={0. , offset*cosphi , -offset*sinphi}; | |
244 | Float_t pos7[3]={ -offset*sinphi , offset*costheta*cosphi, -offset*sinphi}; | |
245 | ||
246 | Chamber(0).SetChamberTransform(pos1[0],pos1[1],pos1[2],new TRotMatrix("rot993","rot993",90., 0. , 90. - deltaphi, 90. , deltaphi, -90. )); | |
247 | Chamber(1).SetChamberTransform(pos2[0],pos2[1],pos2[2],new TRotMatrix("rot994","rot994",90., -deltatheta , 90. , 90.- deltatheta , 0. , 0. )); | |
248 | Chamber(2).SetChamberTransform(pos3[0],pos3[1],pos3[2],new TRotMatrix("rot995","rot995",90., 0. , 90. , 90. , 0. , 0. )); | |
249 | Chamber(3).SetChamberTransform(pos4[0],pos4[1],pos4[2],new TRotMatrix("rot996","rot996",90., deltatheta , 90. , 90 + deltatheta , 0. , 0. )); | |
250 | Chamber(4).SetChamberTransform(pos5[0],pos5[1],pos5[2],new TRotMatrix("rot997","rot997",90., 360. - deltatheta, 108.2 , 90.- deltatheta ,18.2 , 90 - deltatheta)); | |
251 | Chamber(5).SetChamberTransform(pos6[0],pos6[1],pos6[2],new TRotMatrix("rot998","rot998",90., 0. , 90 + deltaphi , 90. , deltaphi, 90. )); | |
252 | Chamber(6).SetChamberTransform(pos7[0],pos7[1],pos7[2],new TRotMatrix("rot999","rot999",90., deltatheta , 108.2 , 90.+ deltatheta ,18.2 , 90 + deltatheta)); | |
c71fc6da | 253 | |
9e1a0ddb | 254 | if(fDebug) { |
255 | printf("%s: * Pads : %3dx%3d *\n", | |
256 | ClassName(),segmentation->Npx(),segmentation->Npy()); | |
257 | printf("%s: * Pad size : %5.2f x%5.2f mm2 *\n", | |
258 | ClassName(),segmentation->Dpx(),segmentation->Dpy()); | |
259 | printf("%s: * Gap Thickness : %5.1f cm *\n", | |
260 | ClassName(),geometry->GetGapThickness()); | |
261 | printf("%s: * Radiator Width : %5.1f cm *\n", | |
262 | ClassName(),geometry->GetQuartzWidth()); | |
263 | printf("%s: * Radiator Length : %5.1f cm *\n", | |
264 | ClassName(),geometry->GetQuartzLength()); | |
265 | printf("%s: * Freon Thickness : %5.1f cm *\n", | |
266 | ClassName(),geometry->GetFreonThickness()); | |
267 | printf("%s: * Charge Slope : %5.1f ADC *\n", | |
268 | ClassName(),response->ChargeSlope()); | |
269 | printf("%s: * Feedback Prob. : %5.2f %% *\n", | |
270 | ClassName(),response->AlphaFeedback()*100); | |
271 | printf("%s: * *\n", | |
272 | ClassName()); | |
273 | printf("%s: *********************************************************************************\n", | |
274 | ClassName()); | |
275 | } | |
ddae0931 | 276 | } |
277 |