]>
Commit | Line | Data |
---|---|---|
c28632f0 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
03f3e21a | 18 | Revision 1.15 2001/08/30 09:51:23 hristov |
19 | The operator[] is replaced by At() or AddAt() in case of TObjArray. | |
20 | ||
2682e810 | 21 | Revision 1.14 2001/05/16 14:57:20 alibrary |
22 | New files for folders and Stack | |
23 | ||
9e1a0ddb | 24 | Revision 1.13 2001/05/10 12:28:04 jbarbosa |
25 | Repositioned the RICH modules. | |
26 | ||
449e6743 | 27 | Revision 1.12 2001/02/23 17:26:12 jbarbosa |
28 | Setters for wire sag effect and voltage values. | |
29 | ||
c4384528 | 30 | Revision 1.11 2001/02/13 20:10:33 jbarbosa |
31 | Removed call to SetNSec() (obsolete). Fixed bug in chamber initialisation (not all chambers were initialised). | |
32 | ||
2fc6393f | 33 | Revision 1.10 2000/12/20 14:08:02 jbarbosa |
34 | Removed dependencies on TGeant3 (thanks to F. Carminati and I. Hrivnacova) | |
35 | ||
5cfcdf54 | 36 | Revision 1.9 2000/12/18 17:44:40 jbarbosa |
37 | Took two lines out of output. | |
38 | ||
f2de8657 | 39 | Revision 1.8 2000/11/01 15:39:00 jbarbosa |
40 | Updated default geometry. | |
41 | ||
2463d46d | 42 | Revision 1.7 2000/10/03 21:44:09 morsch |
43 | Use AliSegmentation and AliHit abstract base classes. | |
44 | ||
a2f7eaf6 | 45 | Revision 1.6 2000/07/10 15:28:39 fca |
46 | Correction of the inheritance scheme | |
47 | ||
452a64c6 | 48 | Revision 1.5 2000/06/30 16:38:51 dibari |
49 | Removed setters. | |
50 | ||
64e9b5aa | 51 | Revision 1.4 2000/06/13 13:13:40 jbarbosa |
52 | Correcting previous correction... | |
53 | ||
bef02574 | 54 | Revision 1.3 2000/06/13 13:06:38 jbarbosa |
55 | Fixed compiling error for HP (multiple declaration) | |
56 | ||
7f36f6bc | 57 | Revision 1.2 2000/06/12 15:36:16 jbarbosa |
58 | Cleaned up version. | |
59 | ||
237c933d | 60 | Revision 1.1 2000/06/09 15:00:31 jbarbosa |
61 | New full version. All parameters configurable. | |
62 | ||
c28632f0 | 63 | Revision 1.9 2000/05/31 08:19:38 jbarbosa |
64 | Fixed bug in StepManager | |
65 | ||
66 | Revision 1.8 2000/05/26 17:30:08 jbarbosa | |
67 | Cerenkov angle now stored within cerenkov data structure. | |
68 | ||
69 | Revision 1.7 2000/05/18 10:31:36 jbarbosa | |
70 | Fixed positioning of spacers inside freon. | |
71 | Fixed positioning of proximity gap | |
72 | inside methane. | |
73 | Fixed cut on neutral particles in the StepManager. | |
74 | ||
75 | Revision 1.6 2000/04/28 11:51:58 morsch | |
76 | Dimensions of arrays hits and Ckov_data corrected. | |
77 | ||
78 | Revision 1.5 2000/04/19 13:28:46 morsch | |
79 | Major changes in geometry (parametrised), materials (updated) and | |
80 | step manager (diagnostics) (JB, AM) | |
81 | ||
82 | */ | |
83 | ||
84 | ||
85 | ||
86 | ////////////////////////////////////////////////////////// | |
87 | // Manager and hits classes for set: RICH full version // | |
88 | ////////////////////////////////////////////////////////// | |
89 | ||
90 | #include <TTUBE.h> | |
91 | #include <TNode.h> | |
92 | #include <TRandom.h> | |
237c933d | 93 | #include <TParticle.h> |
c28632f0 | 94 | |
95 | #include "AliRICHv1.h" | |
237c933d | 96 | #include "AliRICHHit.h" |
a2f7eaf6 | 97 | #include "AliSegmentation.h" |
64e9b5aa | 98 | #include "AliRICHResponse.h" |
03f3e21a | 99 | #include "AliRICHSegmentationV1.h" |
64e9b5aa | 100 | #include "AliRICHResponseV0.h" |
101 | #include "AliRICHGeometry.h" | |
c28632f0 | 102 | #include "AliRun.h" |
103 | #include "AliMC.h" | |
104 | #include "iostream.h" | |
105 | #include "AliCallf77.h" | |
106 | #include "AliConst.h" | |
107 | #include "AliPDG.h" | |
c28632f0 | 108 | |
109 | ClassImp(AliRICHv1) | |
110 | ||
111 | //___________________________________________ | |
452a64c6 | 112 | AliRICHv1::AliRICHv1() |
c28632f0 | 113 | { |
237c933d | 114 | |
115 | // Default constructor fo AliRICHvv1 (full version) | |
116 | ||
c28632f0 | 117 | //fChambers = 0; |
118 | } | |
119 | ||
120 | //___________________________________________ | |
121 | AliRICHv1::AliRICHv1(const char *name, const char *title) | |
452a64c6 | 122 | : AliRICH(name,title) |
c28632f0 | 123 | { |
c28632f0 | 124 | |
237c933d | 125 | // Full version of RICH with hits and diagnostics |
126 | ||
64e9b5aa | 127 | // Version 0 |
128 | // Default Segmentation, no hits | |
03f3e21a | 129 | AliRICHSegmentationV1* segmentation = new AliRICHSegmentationV1; |
64e9b5aa | 130 | // |
131 | // Segmentation parameters | |
c4384528 | 132 | segmentation->SetPadSize(0.84,0.80); |
133 | segmentation->SetDAnod(0.84/2); | |
64e9b5aa | 134 | // |
135 | // Geometry parameters | |
136 | AliRICHGeometry* geometry = new AliRICHGeometry; | |
137 | geometry->SetGapThickness(8); | |
138 | geometry->SetProximityGapThickness(.4); | |
2463d46d | 139 | geometry->SetQuartzLength(133); |
140 | geometry->SetQuartzWidth(127.9); | |
64e9b5aa | 141 | geometry->SetQuartzThickness(.5); |
2463d46d | 142 | geometry->SetOuterFreonLength(133); |
143 | geometry->SetOuterFreonWidth(41.3); | |
144 | geometry->SetInnerFreonLength(133); | |
145 | geometry->SetInnerFreonWidth(41.3); | |
146 | geometry->SetFreonThickness(1.5); | |
64e9b5aa | 147 | // |
148 | // Response parameters | |
c4384528 | 149 | AliRICHResponseV0* response = new AliRICHResponseV0; |
150 | response->SetSigmaIntegration(5.); | |
151 | response->SetChargeSlope(27.); | |
152 | response->SetChargeSpread(0.18, 0.18); | |
153 | response->SetMaxAdc(4096); | |
154 | response->SetAlphaFeedback(0.036); | |
155 | response->SetEIonisation(26.e-9); | |
156 | response->SetSqrtKx3(0.77459667); | |
157 | response->SetKx2(0.962); | |
158 | response->SetKx4(0.379); | |
159 | response->SetSqrtKy3(0.77459667); | |
160 | response->SetKy2(0.962); | |
161 | response->SetKy4(0.379); | |
162 | response->SetPitch(0.25); | |
03f3e21a | 163 | response->SetWireSag(1); // 1->On, 0->Off |
c4384528 | 164 | response->SetVoltage(2150); // Should only be 2000, 2050, 2100 or 2150 |
165 | ||
64e9b5aa | 166 | // |
167 | // AliRICH *RICH = (AliRICH *) gAlice->GetDetector("RICH"); | |
168 | ||
237c933d | 169 | fCkovNumber=0; |
170 | fFreonProd=0; | |
64e9b5aa | 171 | Int_t i=0; |
c28632f0 | 172 | |
64e9b5aa | 173 | fChambers = new TObjArray(kNCH); |
174 | for (i=0; i<kNCH; i++) { | |
175 | ||
2682e810 | 176 | //PH (*fChambers)[i] = new AliRICHChamber(); |
177 | fChambers->AddAt(new AliRICHChamber(), i); | |
64e9b5aa | 178 | |
c28632f0 | 179 | } |
64e9b5aa | 180 | |
181 | for (i=0; i<kNCH; i++) { | |
182 | SetGeometryModel(i,geometry); | |
c4384528 | 183 | SetSegmentationModel(i, segmentation); |
184 | SetResponseModel(i, response); | |
64e9b5aa | 185 | SetDebugLevel(0); |
186 | } | |
187 | ||
188 | ||
c28632f0 | 189 | } |
190 | ||
237c933d | 191 | void AliRICHv1::Init() |
192 | { | |
193 | ||
9e1a0ddb | 194 | if(fDebug) { |
195 | printf("%s: *********************************** RICH_INIT ***********************************\n",ClassName()); | |
196 | printf("%s: * *\n",ClassName()); | |
197 | printf("%s: * AliRICHv1 Full version started *\n",ClassName()); | |
198 | printf("%s: * *\n",ClassName()); | |
199 | } | |
237c933d | 200 | |
201 | ||
a2f7eaf6 | 202 | AliSegmentation* segmentation; |
237c933d | 203 | AliRICHGeometry* geometry; |
204 | AliRICHResponse* response; | |
205 | ||
206 | ||
207 | // | |
208 | // Initialize Tracking Chambers | |
209 | // | |
2fc6393f | 210 | for (Int_t i=0; i<kNCH; i++) { |
237c933d | 211 | //printf ("i:%d",i); |
2682e810 | 212 | //PH ( (AliRICHChamber*) (*fChambers)[i])->Init(i); |
213 | ( (AliRICHChamber*)fChambers->At(i))->Init(i); | |
237c933d | 214 | } |
215 | ||
216 | // | |
217 | // Set the chamber (sensitive region) GEANT identifier | |
218 | ||
2682e810 | 219 | //PH ((AliRICHChamber*)(*fChambers)[0])->SetGid(1); |
220 | //PH ((AliRICHChamber*)(*fChambers)[1])->SetGid(2); | |
221 | //PH ((AliRICHChamber*)(*fChambers)[2])->SetGid(3); | |
222 | //PH ((AliRICHChamber*)(*fChambers)[3])->SetGid(4); | |
223 | //PH ((AliRICHChamber*)(*fChambers)[4])->SetGid(5); | |
224 | //PH ((AliRICHChamber*)(*fChambers)[5])->SetGid(6); | |
225 | //PH ((AliRICHChamber*)(*fChambers)[6])->SetGid(7); | |
226 | ||
227 | ((AliRICHChamber*)fChambers->At(0))->SetGid(1); | |
228 | ((AliRICHChamber*)fChambers->At(1))->SetGid(2); | |
229 | ((AliRICHChamber*)fChambers->At(2))->SetGid(3); | |
230 | ((AliRICHChamber*)fChambers->At(3))->SetGid(4); | |
231 | ((AliRICHChamber*)fChambers->At(4))->SetGid(5); | |
232 | ((AliRICHChamber*)fChambers->At(5))->SetGid(6); | |
233 | ((AliRICHChamber*)fChambers->At(6))->SetGid(7); | |
234 | ||
237c933d | 235 | |
237c933d | 236 | segmentation=Chamber(0).GetSegmentationModel(0); |
237 | geometry=Chamber(0).GetGeometryModel(); | |
238 | response=Chamber(0).GetResponseModel(); | |
239 | ||
449e6743 | 240 | Float_t offset = 490 + 1.276 - geometry->GetGapThickness()/2; //distance from center of mother volume to methane |
241 | Float_t deltaphi = 19.5; //phi angle between center of chambers - z direction | |
242 | Float_t deltatheta = 20; //theta angle between center of chambers - x direction | |
243 | Float_t cosphi = TMath::Cos(deltaphi*TMath::Pi()/180); | |
244 | Float_t sinphi = TMath::Sin(deltaphi*TMath::Pi()/180); | |
245 | Float_t costheta = TMath::Cos(deltatheta*TMath::Pi()/180); | |
246 | Float_t sintheta = TMath::Sin(deltatheta*TMath::Pi()/180); | |
247 | ||
248 | Float_t pos1[3]={0. , offset*cosphi , offset*sinphi}; | |
249 | Float_t pos2[3]={offset*sintheta , offset*costheta , 0. }; | |
250 | Float_t pos3[3]={0. , offset , 0.}; | |
251 | Float_t pos4[3]={-offset*sintheta , offset*costheta , 0.}; | |
252 | Float_t pos5[3]={offset*sinphi , offset*costheta*cosphi, -offset*sinphi}; | |
253 | Float_t pos6[3]={0. , offset*cosphi , -offset*sinphi}; | |
254 | Float_t pos7[3]={ -offset*sinphi , offset*costheta*cosphi, -offset*sinphi}; | |
255 | ||
256 | Chamber(0).SetChamberTransform(pos1[0],pos1[1],pos1[2],new TRotMatrix("rot993","rot993",90., 0. , 90. - deltaphi, 90. , deltaphi, -90. )); | |
257 | Chamber(1).SetChamberTransform(pos2[0],pos2[1],pos2[2],new TRotMatrix("rot994","rot994",90., -deltatheta , 90. , 90.- deltatheta , 0. , 0. )); | |
258 | Chamber(2).SetChamberTransform(pos3[0],pos3[1],pos3[2],new TRotMatrix("rot995","rot995",90., 0. , 90. , 90. , 0. , 0. )); | |
259 | Chamber(3).SetChamberTransform(pos4[0],pos4[1],pos4[2],new TRotMatrix("rot996","rot996",90., deltatheta , 90. , 90 + deltatheta , 0. , 0. )); | |
260 | Chamber(4).SetChamberTransform(pos5[0],pos5[1],pos5[2],new TRotMatrix("rot997","rot997",90., 360. - deltatheta, 108.2 , 90.- deltatheta ,18.2 , 90 - deltatheta)); | |
261 | Chamber(5).SetChamberTransform(pos6[0],pos6[1],pos6[2],new TRotMatrix("rot998","rot998",90., 0. , 90 + deltaphi , 90. , deltaphi, 90. )); | |
262 | Chamber(6).SetChamberTransform(pos7[0],pos7[1],pos7[2],new TRotMatrix("rot999","rot999",90., deltatheta , 108.2 , 90.+ deltatheta ,18.2 , 90 + deltatheta)); | |
237c933d | 263 | |
9e1a0ddb | 264 | if(fDebug) { |
265 | printf("%s: * Pads : %3dx%3d *\n", | |
266 | ClassName(),segmentation->Npx(),segmentation->Npy()); | |
267 | printf("%s: * Pad size : %5.2f x%5.2f mm2 *\n", | |
268 | ClassName(),segmentation->Dpx(),segmentation->Dpy()); | |
269 | printf("%s: * Gap Thickness : %5.1f cm *\n", | |
270 | ClassName(),geometry->GetGapThickness()); | |
271 | printf("%s: * Radiator Width : %5.1f cm *\n", | |
272 | ClassName(),geometry->GetQuartzWidth()); | |
273 | printf("%s: * Radiator Length : %5.1f cm *\n", | |
274 | ClassName(),geometry->GetQuartzLength()); | |
275 | printf("%s: * Freon Thickness : %5.1f cm *\n", | |
276 | ClassName(),geometry->GetFreonThickness()); | |
277 | printf("%s: * Charge Slope : %5.1f ADC *\n", | |
278 | ClassName(),response->ChargeSlope()); | |
279 | printf("%s: * Feedback Prob. : %5.2f %% *\n", | |
280 | ClassName(),response->AlphaFeedback()*100); | |
281 | printf("%s: * Debug Level : %3d *\n", | |
282 | ClassName(),GetDebugLevel()); | |
283 | printf("%s: * *\n", | |
284 | ClassName()); | |
285 | printf("%s: *********************************************************************************\n", | |
286 | ClassName()); | |
287 | } | |
237c933d | 288 | } |
c28632f0 | 289 | |
2463d46d | 290 | |
291 | ||
292 | ||
293 | ||
294 | ||
295 | ||
296 |