]>
Commit | Line | Data |
---|---|---|
4c039060 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
a37078b5 | 18 | Revision 1.14 2000/12/21 16:37:23 morsch |
19 | Use Al for coil and cable material. The materials used before cause the dipole to | |
20 | have hydrogene on the outer surface leading to unrealistic gamma rates due to | |
21 | n-capture. | |
22 | ||
ee7389e1 | 23 | Revision 1.13 2000/10/02 21:28:15 fca |
24 | Removal of useless dependecies via forward declarations | |
25 | ||
94de3818 | 26 | Revision 1.12 2000/06/20 10:53:01 morsch |
27 | Volume placed outside mother volume (DDIP) corrected (Galina Chabratova) | |
28 | ||
e094dc1b | 29 | Revision 1.11 2000/06/11 12:33:46 morsch |
30 | Coding rule violations corrected | |
31 | ||
b43eb0dc | 32 | Revision 1.10 2000/06/09 19:32:56 morsch |
33 | New detailed and corrected version from Galina Chabratova | |
34 | ||
1b206195 | 35 | Revision 1.9 2000/04/27 09:29:53 fca |
36 | Reverting to version 1.6.2 | |
37 | ||
d811c12b | 38 | Revision 1.6.2.1 1999/12/03 16:38:51 fca |
39 | Correct overlap in magnet | |
9e8c9316 | 40 | |
e821f75f | 41 | Revision 1.6 1999/09/29 09:24:30 fca |
42 | Introduction of the Copyright and cvs Log | |
43 | ||
4c039060 | 44 | */ |
45 | ||
fe4da5cc | 46 | /////////////////////////////////////////////////////////////////////////////// |
47 | // // | |
48 | // Magnetic Dipole version 1 // | |
49 | // // | |
50 | //Begin_Html | |
51 | /* | |
d811c12b | 52 | <img src="picts/AliDIPOv2Class.gif"> |
fe4da5cc | 53 | </pre> |
54 | <br clear=left> | |
55 | <font size=+2 color=red> | |
56 | <p>The responsible person for this module is | |
57 | <a href="mailto:andreas.morsch@cern.ch">Andreas Morsch</a>. | |
58 | </font> | |
59 | <pre> | |
60 | */ | |
61 | //End_Html | |
62 | // // | |
63 | // // | |
fe4da5cc | 64 | |
65 | #include "AliDIPOv2.h" | |
66 | #include "AliRun.h" | |
94de3818 | 67 | #include "AliMC.h" |
68 | #include "AliMagF.h" | |
fe4da5cc | 69 | #include "AliConst.h" |
70 | ||
71 | ClassImp(AliDIPOv2) | |
72 | ||
73 | //_____________________________________________________________________________ | |
1b206195 | 74 | AliDIPOv2::AliDIPOv2() |
fe4da5cc | 75 | { |
76 | // | |
1b206195 | 77 | // Last design of magnetic dipole version 2 |
fe4da5cc | 78 | // |
79 | } | |
80 | ||
81 | //_____________________________________________________________________________ | |
82 | AliDIPOv2::AliDIPOv2(const char *name, const char *title) | |
83 | : AliDIPO(name,title) | |
84 | { | |
85 | // | |
86 | // Standard constructor for the magnetic dipole version 2 | |
87 | SetMarkerColor(7); | |
88 | SetMarkerStyle(2); | |
89 | SetMarkerSize(0.4); | |
90 | } | |
91 | ||
92 | //_____________________________________________________________________________ | |
93 | void AliDIPOv2::CreateGeometry() | |
94 | { | |
95 | // | |
96 | // Creation of the geometry of the magnetic DIPOLE version 2 | |
97 | // | |
1b206195 | 98 | |
99 | // AliMC* gMC = AliMC::GetMC(); | |
100 | ||
e094dc1b | 101 | Float_t cpar[5], tpar[15], ypar[12]; |
fe4da5cc | 102 | Float_t dz, dx, dy; |
103 | Int_t idrotm[1899]; | |
b43eb0dc | 104 | Float_t accMax, the1, phi1, the2, phi2, the3, phi3; |
d811c12b | 105 | |
1b206195 | 106 | Int_t *idtmed = fIdtmed->GetArray()-1799; |
107 | ||
ee7389e1 | 108 | // const Int_t kCoil = 1813; |
109 | // const Int_t kCable= 1811; | |
110 | ||
111 | const Int_t kCoil = 1808; | |
112 | const Int_t kCable= 1808; | |
113 | ||
b43eb0dc | 114 | accMax = 9.; // ANGLE POLAIRE MAXIMUM |
1b206195 | 115 | |
fe4da5cc | 116 | // DIPOLE MAGNET |
1b206195 | 117 | |
e094dc1b | 118 | tpar[0] = 0.; |
119 | tpar[1] = 360.; | |
120 | tpar[2] = 4.; | |
121 | // | |
122 | tpar[3] = -250.55; | |
123 | tpar[4] = 144.; | |
124 | tpar[5] = 527.34; | |
125 | // | |
126 | tpar[6] = -160.7; | |
127 | tpar[7] = 144.; | |
128 | tpar[8] = 527.34; | |
129 | // | |
130 | tpar[9] = 150.8; | |
131 | tpar[10] = 193.3; | |
132 | tpar[11] = 527.34; | |
133 | // | |
134 | tpar[12] = 250.55; | |
135 | tpar[13] = 193.3; | |
136 | tpar[14] = 527.34; | |
137 | ||
1b206195 | 138 | |
e094dc1b | 139 | gMC->Gsvolu("DDIP", "PCON", idtmed[1814], tpar, 15); |
fe4da5cc | 140 | // COILS |
fe4da5cc | 141 | // air - m.f. |
1b206195 | 142 | cpar[0] = 207.; |
143 | cpar[1] = 274.; | |
144 | cpar[2] = 37.65; | |
145 | cpar[3] = 119.; | |
146 | cpar[4] = 241. ; | |
147 | // coil - high cuts | |
ee7389e1 | 148 | gMC->Gsvolu("DC1 ", "TUBS", idtmed[kCoil+40], cpar, 5); |
1b206195 | 149 | cpar[3] = -61.; |
150 | cpar[4] = 61.; | |
ee7389e1 | 151 | gMC->Gsvolu("DC2 ", "TUBS", idtmed[kCoil+40], cpar, 5); |
1b206195 | 152 | |
153 | // coil - low cuts cuts | |
154 | cpar[0] = 207.; | |
155 | // cpar[1] = cpar[0] + 10.; | |
156 | cpar[1] = 217; | |
157 | cpar[3] = 119.; | |
158 | cpar[4] = 241.; | |
159 | ||
ee7389e1 | 160 | gMC->Gsvolu("DC3 ", "TUBS", idtmed[kCoil], cpar, 5); |
1b206195 | 161 | cpar[0] = 207.; |
162 | cpar[1] = 217; | |
163 | cpar[3] = -61.; | |
164 | cpar[4] = 61.; | |
ee7389e1 | 165 | gMC->Gsvolu("DC4 ", "TUBS", idtmed[kCoil], cpar, 5); |
1b206195 | 166 | |
cfce8870 | 167 | gMC->Gspos("DC3 ", 1, "DC1 ", 0., 0., 0., 0, "ONLY"); |
cfce8870 | 168 | gMC->Gspos("DC4 ", 1, "DC2 ", 0., 0., 0., 0, "ONLY"); |
1b206195 | 169 | |
170 | // dz = 37.65 - 243.55 | |
171 | dz = -205.9-2.45; | |
172 | dx = 5.; | |
173 | gMC->Gspos("DC1 ", 1, "DDIP", dx, 0., dz, 0, "ONLY"); | |
174 | gMC->Gspos("DC1 ", 2, "DDIP", dx, 0., -dz, 0, "ONLY"); | |
175 | gMC->Gspos("DC2 ", 1, "DDIP", -dx, 0., dz, 0, "ONLY"); | |
176 | gMC->Gspos("DC2 ", 2, "DDIP", -dx, 0., -dz, 0, "ONLY"); | |
fe4da5cc | 177 | the1 = 180.; |
178 | phi1 = 0.; | |
179 | the2 = 90.; | |
1b206195 | 180 | phi2 = 151.; |
fe4da5cc | 181 | the3 = 90.; |
1b206195 | 182 | phi3 = 61.; |
fe4da5cc | 183 | AliMatrix(idrotm[1800], the1, phi1, the2, phi2, the3, phi3); |
1b206195 | 184 | phi2 = 29.; //90-61 |
fe4da5cc | 185 | the3 = -90.; |
1b206195 | 186 | phi3 = -61.; |
fe4da5cc | 187 | AliMatrix(idrotm[1801], the1, phi1, the2, phi2, the3, phi3); |
188 | the1 = 0.; | |
189 | phi1 = 0.; | |
190 | the2 = 90.; | |
1b206195 | 191 | phi2 = 151.; |
fe4da5cc | 192 | the3 = 90.; |
1b206195 | 193 | phi3 = 61.; |
fe4da5cc | 194 | AliMatrix(idrotm[1802], the1, phi1, the2, phi2, the3, phi3); |
1b206195 | 195 | phi2 = 29.; |
fe4da5cc | 196 | the3 = -90.; |
1b206195 | 197 | phi3 = -61.; |
fe4da5cc | 198 | AliMatrix(idrotm[1803], the1, phi1, the2, phi2, the3, phi3); |
1b206195 | 199 | |
fe4da5cc | 200 | cpar[0] = 25.; |
1b206195 | 201 | cpar[1] = 100.3; //25+75.3 |
202 | cpar[2] = 33.5; | |
fe4da5cc | 203 | cpar[3] = 270.; |
204 | cpar[4] = 360.; | |
1b206195 | 205 | //* coil high cuts |
ee7389e1 | 206 | gMC->Gsvolu("DC11", "TUBS", idtmed[kCoil+40], cpar, 5); |
1b206195 | 207 | |
208 | dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad) ; | |
209 | dy = TMath::Cos(30.5*kDegrad) * -(207.+33.5); | |
210 | dz = cpar[1] - 243.55-2.45; | |
cfce8870 | 211 | gMC->Gspos("DC11", 1, "DDIP", dx, dy, dz, idrotm[1800], "ONLY"); |
212 | gMC->Gspos("DC11", 2, "DDIP", dx, dy, -dz, idrotm[1802], "ONLY"); | |
213 | gMC->Gspos("DC11", 3, "DDIP", -dx, dy, dz, idrotm[1801], "ONLY"); | |
214 | gMC->Gspos("DC11", 4, "DDIP", -dx, dy, -dz, idrotm[1803], "ONLY"); | |
1b206195 | 215 | |
216 | ||
217 | ||
218 | //* ... higher cuts | |
fe4da5cc | 219 | cpar[0] = 25.; |
1b206195 | 220 | cpar[1] = 100.3; //25+75.3 |
221 | cpar[2] = 33.5; | |
fe4da5cc | 222 | cpar[3] = 0.; |
223 | cpar[4] = 90.; | |
1b206195 | 224 | //* coil high cuts |
ee7389e1 | 225 | gMC->Gsvolu("DC12", "TUBS", idtmed[kCoil+40], cpar, 5); |
1b206195 | 226 | |
227 | dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad) ; | |
228 | dy = TMath::Cos(30.5*kDegrad) *(207.+33.5); | |
229 | dz = cpar[1] - 243.55-2.45; | |
cfce8870 | 230 | gMC->Gspos("DC12", 1, "DDIP", dx, dy, dz, idrotm[1801], "ONLY"); |
231 | gMC->Gspos("DC12", 2, "DDIP", dx, dy, -dz, idrotm[1803], "ONLY"); | |
232 | gMC->Gspos("DC12", 3, "DDIP", -dx, dy, dz, idrotm[1800], "ONLY"); | |
233 | gMC->Gspos("DC12", 4, "DDIP", -dx, dy, -dz, idrotm[1802], "ONLY"); | |
1b206195 | 234 | |
fe4da5cc | 235 | the1 = 90.; |
1b206195 | 236 | phi1 = 61.; |
fe4da5cc | 237 | the2 = 90.; |
1b206195 | 238 | phi2 = 151.; |
fe4da5cc | 239 | the3 = 0.; |
240 | phi3 = 0.; | |
241 | AliMatrix(idrotm[1804], the1, phi1, the2, phi2, the3, phi3); | |
242 | the1 = 90.; | |
1b206195 | 243 | phi1 = -61.; |
fe4da5cc | 244 | the2 = 90.; |
1b206195 | 245 | phi2 = -151.; |
fe4da5cc | 246 | AliMatrix(idrotm[1805], the1, phi1, the2, phi2, the3, phi3); |
1b206195 | 247 | the1 = 90.; |
248 | phi1 = 119.; //180 -61 | |
249 | the2 = 90.; | |
250 | phi2 = 209.; //270-61 | |
251 | AliMatrix(idrotm[1806], the1, phi1, the2, phi2, the3, phi3); | |
252 | the1 = 90.; | |
253 | phi1 = -119.; | |
254 | the2 = 90.; | |
255 | phi2 = -209.; | |
256 | AliMatrix(idrotm[1807], the1, phi1, the2, phi2, the3, phi3); | |
257 | ||
258 | //* coil - high cuts | |
259 | ||
260 | tpar[0] = 37.65; | |
261 | tpar[1] = 33.5; | |
262 | tpar[2] = 145.5; | |
ee7389e1 | 263 | gMC->Gsvolu("DL1 ", "BOX ", idtmed[kCoil+40], tpar, 3); |
1b206195 | 264 | |
265 | // coil - low cuts | |
266 | ||
267 | tpar[0] = 5.; | |
268 | dx = 37.65 - 5.; | |
ee7389e1 | 269 | gMC->Gsvolu("DL2 ", "BOX ", idtmed[kCoil], tpar, 3); |
1b206195 | 270 | gMC->Gspos("DL2 ", 1, "DL1 ", dx, 0., 0., 0, "ONLY"); |
271 | ||
272 | dx =-53.62; | |
273 | dy =-241.26819; | |
274 | dz = 0.0; | |
cfce8870 | 275 | gMC->Gspos("DL1 ", 1, "DDIP", dx, dy, dz, idrotm[1804], "ONLY"); |
276 | gMC->Gspos("DL1 ", 2, "DDIP", dx, -dy, dz, idrotm[1805], "ONLY"); | |
1b206195 | 277 | gMC->Gspos("DL1 ", 3, "DDIP",-dx, dy, dz, idrotm[1806], "ONLY"); |
278 | gMC->Gspos("DL1 ", 4, "DDIP",-dx, -dy, dz, idrotm[1807], "ONLY"); | |
279 | ||
280 | // Contactor | |
281 | ||
282 | // high cuts | |
283 | ||
284 | //Steel outer face planes | |
285 | ||
286 | cpar[0] = 207.-18.6; | |
287 | cpar[1] = 274.+18.6; | |
288 | cpar[2] = 1.; | |
289 | cpar[3] = -50.; | |
290 | cpar[4] = 50.; | |
291 | ||
292 | gMC->Gsvolu("DCO1", "TUBS", idtmed[1818], cpar, 5); | |
293 | dx = -5.; | |
294 | dz = 168.25-1.5-1.; | |
295 | gMC->Gspos("DCO1", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
296 | dz = 243.55+4.5+1.5+1.; | |
297 | gMC->Gspos("DCO1", 2, "DDIP", dx, 0, dz, 0, "ONLY"); | |
d811c12b | 298 | |
1b206195 | 299 | // 9.06.2000 |
300 | ||
301 | // cpar[0] = 207.-18.6; | |
302 | // cpar[1] = 274.+18.6; | |
303 | // cpar[2] = 1.; | |
304 | cpar[3] = 180.-50.; | |
305 | cpar[4] = 180.+50.; | |
306 | ||
307 | gMC->Gsvolu("DCO2", "TUBS", idtmed[1818], cpar, 5); | |
308 | dx = +5.; | |
309 | dz = 168.25-1.5-1.; | |
310 | gMC->Gspos("DCO2", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
311 | dz = 243.55+4.5+1.5+1.; | |
312 | gMC->Gspos("DCO2", 2, "DDIP", dx, 0, dz, 0, "ONLY"); | |
313 | ||
314 | ||
315 | ||
316 | // Resin face planes | |
317 | ||
318 | cpar[0] = 207.; | |
319 | cpar[1] = 274.; | |
320 | cpar[2] = .75; | |
321 | cpar[3] = -50.; | |
322 | cpar[4] = 50.; | |
323 | ||
324 | gMC->Gsvolu("DCO3", "TUBS", idtmed[1812], cpar, 5); | |
325 | dx = -5; | |
326 | dz = 168.25-0.75; | |
327 | gMC->Gspos("DCO3", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
328 | dz = 243.55+4.5+0.75; | |
329 | gMC->Gspos("DCO3", 2, "DDIP", dx, 0, dz, 0, "ONLY"); | |
330 | ||
331 | // 9.06.2000 | |
332 | ||
333 | cpar[3] = 180.-50.; | |
334 | cpar[4] = 180.+50.; | |
335 | gMC->Gsvolu("DCO4", "TUBS", idtmed[1812], cpar, 5); | |
336 | dx = +5; | |
337 | dz = 168.25-0.75; | |
338 | gMC->Gspos("DCO4", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
339 | dz = 243.55+4.5+0.75; | |
340 | gMC->Gspos("DCO4", 2, "DDIP", dx, 0, dz, 0, "ONLY"); | |
341 | ||
342 | ||
343 | // G10 face plane | |
344 | ||
345 | cpar[0] = 207.; | |
346 | cpar[1] = 274.; | |
347 | cpar[2] = 2.25; | |
348 | cpar[3] = -50.; | |
349 | cpar[4] = 50.; | |
350 | ||
351 | gMC->Gsvolu("DCO5", "TUBS", idtmed[1810], cpar, 5); | |
352 | ||
353 | dx = -5; | |
354 | dz = 243.55+2.25; | |
355 | gMC->Gspos("DCO5", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
356 | ||
357 | // 9.06.2000 | |
358 | ||
359 | cpar[3] = 180.-50.; | |
360 | cpar[4] = 180.+50.; | |
361 | ||
362 | gMC->Gsvolu("DCO6", "TUBS", idtmed[1810], cpar, 5); | |
363 | ||
364 | dx = +5; | |
365 | dz = 243.55+2.25; | |
366 | gMC->Gspos("DCO6", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
367 | ||
368 | //Steel supported planes | |
369 | ||
370 | cpar[0] = 274.+1.5+2.; | |
371 | cpar[1] = 274.+18.6; | |
372 | cpar[2] = 1.; | |
373 | cpar[3] = -50.; | |
374 | cpar[4] = 50.; | |
375 | ||
376 | gMC->Gsvolu("DCO7", "TUBS", idtmed[1818], cpar, 5); | |
377 | ||
378 | dx = -5; | |
379 | dz = 168.25+1.; | |
380 | gMC->Gspos("DCO7", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
381 | ||
382 | // 9.06.2000 | |
383 | cpar[0] = 274.+1.5+2.; | |
384 | cpar[1] = 274.+18.6; | |
385 | cpar[2] = 1.; | |
386 | cpar[3] = 180.-50.; | |
387 | cpar[4] = 180.+50.; | |
388 | ||
389 | ||
390 | gMC->Gsvolu("DCO8", "TUBS", idtmed[1818], cpar, 5); | |
391 | ||
392 | dx = +5; | |
393 | dz = 168.25+1.; | |
394 | gMC->Gspos("DCO8", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
395 | ||
396 | // | |
397 | ||
398 | cpar[0] = 207.- 18.6; | |
399 | cpar[1] = 207.- 2.- 1.5; | |
400 | cpar[2] = 1.; | |
401 | cpar[3] = -50.; | |
402 | cpar[4] = 50.; | |
403 | ||
404 | gMC->Gsvolu("DCO9", "TUBS", idtmed[1818], cpar, 5); | |
405 | ||
406 | dx = -5; | |
407 | dz = 168.25+1.; | |
408 | gMC->Gspos("DCO9", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
409 | ||
410 | // 9.06.2000 | |
411 | ||
412 | cpar[0] = 207.- 18.6; | |
413 | cpar[1] = 207.- 2.- 1.5; | |
414 | cpar[2] = 1.; | |
415 | cpar[3] = 180.-50.; | |
416 | cpar[4] = 180.+50.; | |
417 | ||
418 | gMC->Gsvolu("DCOA", "TUBS", idtmed[1818], cpar, 5); | |
419 | ||
420 | dx = +5; | |
421 | dz = 168.25+1.; | |
422 | gMC->Gspos("DCOA", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
423 | ||
424 | ||
425 | // Sides steel planes | |
426 | ||
427 | cpar[0] = 207. - 1.5 -2.; | |
428 | cpar[1] = 207. - 1.5 ; | |
429 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; | |
430 | cpar[3] = -50.; | |
431 | cpar[4] = 50.; | |
432 | ||
433 | gMC->Gsvolu("DCOB", "TUBS", idtmed[1818], cpar, 5); | |
434 | ||
435 | cpar[0] = 274. + 1.5; | |
436 | cpar[1] = 274. + 1.5 +2.; | |
437 | ||
438 | gMC->Gsvolu("DCOC", "TUBS", idtmed[1818], cpar, 5); | |
439 | ||
440 | dx=-5.; | |
441 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
442 | gMC->Gspos("DCOB", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
443 | gMC->Gspos("DCOC", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
444 | ||
445 | // 9.06.2000 | |
446 | ||
447 | cpar[0] = 207. - 1.5 -2.; | |
448 | cpar[1] = 207. - 1.5 ; | |
449 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; | |
450 | cpar[3] = 180.-50.; | |
451 | cpar[4] = 180.+50.; | |
452 | ||
453 | gMC->Gsvolu("DCOD", "TUBS", idtmed[1818], cpar, 5); | |
454 | ||
455 | cpar[0] = 274. + 1.5; | |
456 | cpar[1] = 274. + 1.5 +2.; | |
457 | ||
458 | gMC->Gsvolu("DCOE", "TUBS", idtmed[1818], cpar, 5); | |
459 | ||
460 | dx=+5.; | |
461 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
462 | gMC->Gspos("DCOD", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
463 | gMC->Gspos("DCOE", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
464 | ||
465 | ||
466 | // Top and bottom resin planes | |
467 | ||
468 | cpar[0] = 207. - 1.5 ; | |
469 | cpar[1] = 207. ; | |
470 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; | |
471 | cpar[3] = -50.; | |
472 | cpar[4] = 50.; | |
473 | ||
474 | gMC->Gsvolu("DCOF", "TUBS", idtmed[1812], cpar, 5); | |
475 | ||
476 | cpar[0] = 274.; | |
477 | cpar[1] = 274. + 1.5; | |
478 | ||
479 | gMC->Gsvolu("DCOG", "TUBS", idtmed[1812], cpar, 5); | |
480 | ||
481 | ||
482 | dx=-5.; | |
483 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
484 | gMC->Gspos("DCOF", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
485 | gMC->Gspos("DCOG", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
486 | ||
487 | // 9.06.2000 | |
488 | cpar[0] = 207. - 1.5 ; | |
489 | cpar[1] = 207. ; | |
490 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; | |
491 | ||
492 | cpar[3] = 180.-50.; | |
493 | cpar[4] = 180.+50.; | |
494 | ||
495 | gMC->Gsvolu("DCOH", "TUBS", idtmed[1812], cpar, 5); | |
496 | ||
497 | cpar[0] = 274.; | |
498 | cpar[1] = 274. + 1.5; | |
499 | ||
500 | gMC->Gsvolu("DCOI", "TUBS", idtmed[1812], cpar, 5); | |
501 | ||
502 | ||
503 | dx=+5.; | |
504 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
505 | gMC->Gspos("DCOH", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
506 | gMC->Gspos("DCOI", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
507 | ||
508 | ||
509 | // Aluminum cabels | |
510 | ||
511 | cpar[0] = 274. + 1.5 +2.; | |
512 | cpar[1] = 274. + 1.5 +2. + 80.; | |
513 | cpar[2] = 5.05/2; | |
514 | cpar[3] = -24.; | |
515 | cpar[4] = 24.; | |
516 | ||
ee7389e1 | 517 | gMC->Gsvolu("DCOJ", "TUBS", idtmed[kCable], cpar, 5); |
1b206195 | 518 | |
519 | // dx = 274. + 1.5 +2. +40.; | |
520 | // dx = 5. + 1.5 +2. +40.; | |
521 | // dx = 5. + 1.5 +2.; | |
522 | dx=-5.; | |
523 | dz = 168.25 + 5.05 + 5.05/2; | |
524 | gMC->Gspos("DCOJ", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
525 | ||
526 | dz = 243.55 - 5.05/2; | |
527 | gMC->Gspos("DCOJ", 2, "DDIP", dx, 0, dz, 0, "ONLY"); | |
528 | ||
529 | // 9.06.2000 | |
530 | ||
531 | cpar[3] = 180.-24.; | |
532 | cpar[4] = 180.+24.; | |
533 | ||
ee7389e1 | 534 | gMC->Gsvolu("DCOK", "TUBS", idtmed[kCable], cpar, 5); |
1b206195 | 535 | |
536 | // dx = 274. + 1.5 +2. +40.; | |
537 | // dx = 5. + 1.5 +2. +40.; | |
538 | // dx = 5. + 1.5 +2.; | |
539 | dx=+5.; | |
540 | dz = 168.25 + 5.05 + 5.05/2; | |
541 | gMC->Gspos("DCOK", 1, "DDIP", dx, 0, dz, 0, "ONLY"); | |
542 | ||
543 | dz = 243.55 - 5.05/2; | |
544 | gMC->Gspos("DCOK", 2, "DDIP", dx, 0, dz, 0, "ONLY"); | |
545 | ||
546 | ||
fe4da5cc | 547 | // YOKE |
1b206195 | 548 | |
549 | // Top and bottom blocks | |
550 | ypar[0] = 298.1 ; | |
551 | ypar[1] = 69.5; | |
552 | ypar[2] = 155.75; | |
553 | ||
554 | // iron- high cuts | |
555 | gMC->Gsvolu("DY1 ", "BOX ", idtmed[1858], ypar, 3); | |
556 | ypar[0] = 144.+10. ; | |
557 | ypar[1] = 193.3+10.; | |
fe4da5cc | 558 | ypar[2] = 5.; |
1b206195 | 559 | ypar[3] = 155.75; |
560 | dy = -69.5 + 5.; | |
561 | // iron- low cuts | |
562 | gMC->Gsvolu("DY11", "TRD1", idtmed[1818], ypar, 4); | |
563 | gMC->Gspos("DY11", 1, "DY1 ", 0., dy, 0., 0, "ONLY"); | |
564 | ||
565 | dy = 365.5; | |
566 | dz = 4.95; | |
567 | gMC->Gspos("DY1 ", 1, "DDIP", 0., dy, -dz, 0, "ONLY"); | |
568 | ||
569 | the1 = 270.; | |
fe4da5cc | 570 | phi1 = 0.; |
1b206195 | 571 | the2 = 270.; |
fe4da5cc | 572 | phi2 = 90.; |
1b206195 | 573 | the3 = 0.; |
fe4da5cc | 574 | phi3 = 0.; |
1b206195 | 575 | AliMatrix(idrotm[1808], the1, phi1, the2, phi2, the3, phi3); |
ee7389e1 | 576 | gMC->Gspos("DY1 ", 2, "DDIP", 0., -dy, -dz, idrotm[1808] , "ONLY"); |
1b206195 | 577 | |
578 | // side walls | |
579 | // ypar[0] = 579./2. ; | |
580 | ypar[0] = 296. ; | |
581 | ypar[1] = 0.; | |
582 | ypar[2] = 0.; | |
583 | ypar[3] = 155.75; | |
584 | ypar[4] = 47.9 ; | |
585 | ypar[5] = 72.55; | |
586 | ypar[6] = 4.3058039629 ; | |
587 | // z+ | |
588 | ypar[7] = 155.75; | |
589 | ypar[8] = 47.9 ; | |
590 | ypar[9] = 72.55; | |
591 | ypar[10] = 4.3058039629 ; | |
592 | ||
593 | // iron - high cuts | |
594 | ||
595 | gMC->Gsvolu("DY2 ", "TRAP", idtmed[1858], ypar,11); | |
596 | ||
597 | ypar[4] = 47.9 -5.; | |
598 | ypar[5] = 72.55 -5.; | |
599 | ||
600 | ypar[8] = 47.9 -5.; | |
601 | ypar[9] = 72.55 -5.; | |
602 | ||
603 | ||
604 | // iron - low cuts | |
605 | ||
606 | gMC->Gsvolu("DY22", "TRAP", idtmed[1818], ypar,11); | |
607 | ||
608 | dy = 0.; | |
609 | dx = -5.; | |
610 | ||
611 | gMC->Gspos("DY22", 1, "DY2 ", dx, dy, 0., 0, "ONLY"); | |
612 | ||
613 | the1 = 90.; | |
614 | phi1 = 180.; | |
615 | the2 = 180.; | |
616 | phi2 = 180.; | |
617 | the3 = 90.; | |
618 | phi3 = 90.; | |
619 | AliMatrix(idrotm[1809], the1, phi1, the2, phi2, the3, phi3); | |
620 | ||
621 | the1 = 90.; | |
fe4da5cc | 622 | phi1 = 0.; |
1b206195 | 623 | the2 = 180.; |
624 | phi2 = 0.; | |
625 | the3 = 90. ; | |
626 | phi3 = 90.; | |
627 | AliMatrix(idrotm[1810], the1, phi1, the2, phi2, the3, phi3); | |
628 | ||
629 | dx = 228.875; | |
630 | dz = - 4.95; | |
631 | gMC->Gspos("DY2 ", 1, "DDIP", dx, 0.0, dz, idrotm[1809], "ONLY"); | |
632 | gMC->Gspos("DY2 ", 2, "DDIP", -dx, 0.0, dz, idrotm[1810], "ONLY"); | |
633 | ||
634 | dz=975.; | |
a37078b5 | 635 | gMC->Gspos("DDIP", 1, "ALIC", 0., 0., dz, 0, "MANY"); |
1b206195 | 636 | |
cfce8870 | 637 | gMC->Gsatt("DDIP", "SEEN", 0); |
1b206195 | 638 | // gMC->Gsatt("DC21", "SEEN", 0); |
639 | // gMC->Gsatt("DC22", "SEEN", 0); | |
640 | // gMC->Gsatt("DC3 ", "SEEN", 0); | |
641 | // gMC->Gsatt("DC4 ", "SEEN", 0); | |
fe4da5cc | 642 | } |
643 | ||
644 | //_____________________________________________________________________________ | |
b8032157 | 645 | void AliDIPOv2::DrawModule() |
fe4da5cc | 646 | { |
647 | // | |
648 | // Draw a shaded view of the muon absorber | |
649 | // | |
650 | ||
1b206195 | 651 | AliMC* gMC = AliMC::GetMC(); |
652 | ||
fe4da5cc | 653 | // Set everything unseen |
cfce8870 | 654 | gMC->Gsatt("*", "seen", -1); |
fe4da5cc | 655 | // |
656 | // Set ALIC mother transparent | |
cfce8870 | 657 | gMC->Gsatt("ALIC","SEEN",0); |
fe4da5cc | 658 | // |
659 | // Set the volumes visible | |
cfce8870 | 660 | gMC->Gsatt("DDIP","seen",0); |
661 | gMC->Gsatt("DC1 ","seen",1); | |
662 | gMC->Gsatt("DC2 ","seen",1); | |
663 | gMC->Gsatt("DC3 ","seen",1); | |
664 | gMC->Gsatt("DC4 ","seen",1); | |
665 | gMC->Gsatt("DC11","seen",1); | |
666 | gMC->Gsatt("DC21","seen",1); | |
667 | gMC->Gsatt("DC12","seen",1); | |
668 | gMC->Gsatt("DC22","seen",1); | |
669 | gMC->Gsatt("DL1 ","seen",1); | |
670 | gMC->Gsatt("DL2 ","seen",1); | |
671 | gMC->Gsatt("DY1 ","seen",1); | |
672 | gMC->Gsatt("DY2 ","seen",1); | |
673 | gMC->Gsatt("DYL ","seen",1); | |
674 | gMC->Gsatt("DY3 ","seen",1); | |
1b206195 | 675 | // gMC->Gsatt("DY4 ","seen",1); |
676 | // gMC->Gsatt("DY5 ","seen",1); | |
677 | // gMC->Gsatt("DY6 ","seen",1); | |
678 | // gMC->Gsatt("DY7 ","seen",1); | |
fe4da5cc | 679 | // |
cfce8870 | 680 | gMC->Gdopt("hide", "on"); |
681 | gMC->Gdopt("shad", "on"); | |
682 | gMC->Gsatt("*", "fill", 7); | |
683 | gMC->SetClipBox("."); | |
684 | gMC->SetClipBox("."); | |
685 | gMC->DefaultRange(); | |
686 | gMC->Gdraw("alic", 30, 30, 0, 17, 13.5, .019, .019); | |
687 | gMC->Gdhead(1111, "Magnetic Dipole Version 2"); | |
688 | gMC->Gdman(16, 4, "MAN"); | |
fe4da5cc | 689 | } |
690 | ||
691 | //_____________________________________________________________________________ | |
692 | void AliDIPOv2::CreateMaterials() | |
693 | { | |
694 | // | |
695 | // Create Materials for Magnetic Dipole version 2 | |
696 | // | |
697 | ||
b43eb0dc | 698 | Int_t isxfld = gAlice->Field()->Integ(); |
699 | Float_t sxmgmx = gAlice->Field()->Max(); | |
fe4da5cc | 700 | |
701 | Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 }; | |
702 | Float_t zsteel[4] = { 26.,24.,28.,14. }; | |
703 | Float_t wsteel[4] = { .715,.18,.1,.005 }; | |
1b206195 | 704 | |
fe4da5cc | 705 | Float_t acoil[3] = { 26.98,1.01,16. }; |
706 | Float_t zcoil[3] = { 13.,1.,8. }; | |
707 | Float_t wcoil[3] = { .66,.226,.114 }; | |
1b206195 | 708 | |
709 | Float_t aresi[3] = { 1.01,12.011,16.}; | |
710 | Float_t zresi[3] = { 1.,6.,8. }; | |
711 | Float_t wresi[3] = { .0644,.7655,.1701 }; | |
712 | ||
713 | Float_t aG10[5] = { 1.01,12.011,16.,28.085 ,79.904 }; | |
714 | Float_t zG10[5] = { 1.,6.,8.,14.,35. }; | |
715 | Float_t wG10[5] = { .02089,.22338,.28493,.41342,.05738 }; | |
716 | ||
717 | Float_t aAlCon[2] = { 14.61, 26.98}; | |
718 | Float_t zAlCon[2] = { 7.3, 13.}; | |
719 | Float_t wAlCon[2] = { .0004,.9996}; | |
720 | ||
fe4da5cc | 721 | |
722 | Float_t epsil, stmin, deemax, tmaxfd, stemax; | |
723 | ||
724 | // --- Define the various materials for GEANT --- | |
725 | // Aluminum | |
726 | AliMaterial(9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); | |
727 | AliMaterial(29, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); | |
728 | AliMaterial(49, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); | |
729 | ||
730 | // Iron | |
731 | AliMaterial(10, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); | |
732 | AliMaterial(30, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); | |
733 | AliMaterial(50, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); | |
734 | ||
735 | // Air | |
736 | AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); | |
737 | AliMaterial(35, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); | |
738 | AliMaterial(55, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); | |
739 | ||
740 | // Vacuum | |
741 | AliMaterial(16, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
742 | AliMaterial(36, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
743 | AliMaterial(56, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
744 | ||
745 | // stainless Steel | |
746 | AliMixture(19, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
747 | AliMixture(39, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
748 | AliMixture(59, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
749 | ||
750 | // Coil | |
751 | AliMixture(14, "Al$", acoil, zcoil, 2.122, 3, wcoil); | |
752 | AliMixture(34, "Al$", acoil, zcoil, 2.122, 3, wcoil); | |
753 | AliMixture(54, "Al$", acoil, zcoil, 2.122, 3, wcoil); | |
1b206195 | 754 | |
755 | //RESIN | |
756 | AliMixture(13, "RESIN$", aresi, zresi, 1.05, 3, wresi); | |
757 | AliMixture(33, "RESIN$", aresi, zresi, 1.05, 3, wresi); | |
758 | AliMixture(53, "RESIN$", aresi, zresi, 1.05, 3, wresi); | |
759 | ||
760 | //G10 | |
761 | AliMixture(11, "G10$", aG10, zG10, 1.7, 5, wG10); | |
762 | AliMixture(31, "G10$", aG10, zG10, 1.7, 5, wG10); | |
763 | AliMixture(51, "G10$", aG10, zG10, 1.7, 5, wG10); | |
764 | ||
765 | //Aluminium Conductor | |
766 | AliMixture(12, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); | |
767 | AliMixture(32, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); | |
768 | AliMixture(52, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); | |
769 | ||
fe4da5cc | 770 | // **************** |
771 | // Defines tracking media parameters. | |
772 | // Les valeurs sont commentees pour laisser le defaut | |
773 | // a GEANT (version 3-21, page CONS200), f.m. | |
774 | epsil = .001; // Tracking precision, | |
775 | stemax = -1.; // Maximum displacement for multiple scat | |
776 | tmaxfd = -20.; // Maximum angle due to field deflection | |
777 | deemax = -.3; // Maximum fractional energy loss, DLS | |
778 | stmin = -.8; | |
779 | // *************** | |
780 | ||
781 | // Aluminum | |
b43eb0dc | 782 | AliMedium(9, "ALU_C0 ", 9, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
783 | AliMedium(29, "ALU_C1 ", 29, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
784 | AliMedium(49, "ALU_C2 ", 49, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 785 | |
786 | // Iron | |
b43eb0dc | 787 | AliMedium(10, "FE_C0 ", 10, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
788 | AliMedium(30, "FE_C1 ", 30, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
789 | AliMedium(50, "FE_C2 ", 50, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 790 | |
791 | // Air | |
b43eb0dc | 792 | AliMedium(15, "AIR_C0 ", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
793 | AliMedium(35, "AIR_C1 ", 35, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
794 | AliMedium(55, "AIR_C2 ", 55, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 795 | |
796 | // Vacuum | |
b43eb0dc | 797 | AliMedium(16, "VA_C0 ", 16, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
798 | AliMedium(36, "VA_C1 ", 36, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
799 | AliMedium(56, "VA_C2 ", 56, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 800 | |
801 | // Steel | |
b43eb0dc | 802 | AliMedium(19, "ST_C0 ", 19, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
803 | AliMedium(39, "ST_C1 ", 39, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
804 | AliMedium(59, "ST_C3 ", 59, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 805 | |
806 | // Coil | |
b43eb0dc | 807 | AliMedium(14, "Coil_C1 ", 14, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
808 | AliMedium(34, "Coil_C2 ", 34, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
809 | AliMedium(54, "Coil_C3 ", 54, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
1b206195 | 810 | |
811 | // Resin | |
b43eb0dc | 812 | AliMedium(13, "RESIN_C0 ", 13, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
813 | AliMedium(33, "RESIN_C1 ", 33, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
814 | AliMedium(53, "RESIN_C2 ", 53, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
1b206195 | 815 | |
816 | // G10 | |
b43eb0dc | 817 | AliMedium(11, "G10_C0 ", 11, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
818 | AliMedium(31, "G10_C1 ", 31, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
819 | AliMedium(51, "G10_C2 ", 51, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
1b206195 | 820 | |
821 | //Aluminium Contactor | |
b43eb0dc | 822 | AliMedium(12, "AlCond_C0 ", 12, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
823 | AliMedium(32, "AlCond_C1 ", 32, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
824 | AliMedium(52, "AlCond_C2 ", 52, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 825 | } |
826 | ||
1b206195 | 827 | |
828 | ||
829 | ||
830 | ||
831 |