]>
Commit | Line | Data |
---|---|---|
4c039060 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
b43eb0dc | 18 | Revision 1.6 1999/09/29 09:24:30 fca |
19 | Introduction of the Copyright and cvs Log | |
20 | ||
4c039060 | 21 | */ |
22 | ||
fe4da5cc | 23 | /////////////////////////////////////////////////////////////////////////////// |
24 | // // | |
25 | // Beam pipe class // | |
26 | // // | |
27 | //Begin_Html | |
28 | /* | |
1439f98e | 29 | <img src="picts/AliPIPEClass.gif"> |
fe4da5cc | 30 | */ |
31 | //End_Html | |
32 | // // | |
33 | /////////////////////////////////////////////////////////////////////////////// | |
34 | ||
35 | #include "AliPIPEv1.h" | |
36 | #include "AliRun.h" | |
37 | #include "AliMC.h" | |
38 | ||
39 | ClassImp(AliPIPEv1) | |
40 | ||
41 | //_____________________________________________________________________________ | |
b8032157 | 42 | AliPIPEv1::AliPIPEv1() |
fe4da5cc | 43 | { |
44 | // | |
45 | // Default constructor for beam pipe | |
46 | // | |
47 | } | |
48 | ||
49 | //_____________________________________________________________________________ | |
50 | AliPIPEv1::AliPIPEv1(const char *name, const char *title) | |
51 | : AliPIPE(name,title) | |
52 | { | |
53 | // | |
54 | // Standard constructor for beam pipe | |
55 | // | |
56 | } | |
57 | ||
58 | //_____________________________________________________________________________ | |
59 | void AliPIPEv1::CreateGeometry() | |
60 | { | |
61 | // | |
62 | // Create Beam Pipe geometry | |
63 | // | |
64 | //Begin_Html | |
65 | /* | |
1439f98e | 66 | <img src="picts/AliPIPE.gif"> |
fe4da5cc | 67 | */ |
68 | //End_Html | |
69 | //Begin_Html | |
70 | /* | |
1439f98e | 71 | <img src="picts/AliPIPETree.gif"> |
fe4da5cc | 72 | */ |
73 | //End_Html | |
74 | ||
b43eb0dc | 75 | Float_t tpar[3], dzmo, zpos, absorberDistance, absorberEnd; |
fe4da5cc | 76 | Float_t r2, dr; |
77 | ||
b43eb0dc | 78 | const Double_t kZFlange = 150; |
fe4da5cc | 79 | |
ad51aeb0 | 80 | Int_t *idtmed = fIdtmed->GetArray()-1999; |
fe4da5cc | 81 | |
82 | ||
b43eb0dc | 83 | absorberDistance = 90.; // DEFINES DRIFT LENGTH |
fe4da5cc | 84 | //z_nose = 102.; |
85 | //z_cone = 285.; | |
86 | //theta1 = 24.; // 1. angle defining the front absorber | |
87 | //theta2 = 5.; // 2. angle defining the front absorbe | |
88 | //acc_max = 9.; // ANGLE POLAIRE MAXIMUM | |
89 | //acc_min = 2.; // ANGLE POLAIRE MINIMUM DE DETECTION | |
b43eb0dc | 90 | absorberEnd = 503.; |
fe4da5cc | 91 | //d_steel = 1.; // THICKNESS OF STEEL SUPPORT |
92 | //d_poly = 7.5; | |
93 | //d_pb = 2.5; | |
94 | //abs_cc = 315.; // DEFINES LENGTH OF CARBON | |
95 | //abs_c = 358.; | |
96 | //abs_s = 150.; // DEFINES W-SHIELD LENGTH | |
97 | //abs_n = 80.; // START OF NOSE | |
98 | //r_abs = 4.; | |
99 | //r_pb = .1; | |
100 | //epsilon = .01; | |
101 | //theta_r = 3.; | |
102 | //d_rear = 35.; | |
103 | //theta_open = .75; | |
104 | ||
105 | //z_l3 = 700.; | |
106 | //zmag_in = 725.; | |
107 | //zmag_out = 1225.; | |
108 | //zfil_in = 1471.; | |
109 | //zfil_out = 1591.; | |
110 | //zcon_in = 1900.; | |
111 | //zcon_out = 2e3; | |
112 | //zcone_e = 859.0875; | |
113 | //spec_l = 1800.; | |
114 | //zplug_in = 1780.; | |
115 | //zplug_out = 1900.; | |
116 | ||
117 | // Chamber position | |
118 | // CZ1=515.5 | |
119 | //cz1 = 511.; | |
120 | //cz2 = 686.; | |
121 | //cz3 = 971.; | |
122 | //cz4 = 1245.; | |
123 | //cz5 = 1445.; | |
124 | //cz6 = 1610.; | |
125 | //cz7 = 1710.; | |
126 | ||
127 | ||
128 | // the mother of all beam pipes | |
129 | ||
130 | tpar[0] = 0.; | |
131 | tpar[1] = 3.; | |
b43eb0dc | 132 | tpar[2] = (absorberDistance + 700.) / 2.; |
133 | dzmo = tpar[2] - absorberDistance; | |
cfce8870 | 134 | gMC->Gsvolu("QQMO", "TUBE", idtmed[2015], tpar, 3); |
135 | gMC->Gspos("QQMO", 1, "ALIC", 0., 0., -dzmo, 0, "ONLY"); | |
fe4da5cc | 136 | |
137 | // BEAM PIPE IN DRIFT SPACE | |
138 | ||
b43eb0dc | 139 | // -30-kZFlange |
fe4da5cc | 140 | tpar[0] = 0.; |
141 | tpar[1] = 3.; | |
142 | tpar[2] = 30; | |
cfce8870 | 143 | gMC->Gsvolu("QDT1", "TUBE", idtmed[2015], tpar, 3); |
fe4da5cc | 144 | |
145 | tpar[0] = 2.9; | |
cfce8870 | 146 | gMC->Gsvolu("QTB1", "TUBE", idtmed[2004], tpar, 3); |
147 | gMC->Gspos("QTB1", 1, "QDT1", 0., 0., 0., 0, "ONLY"); | |
148 | gMC->Gspos("QDT1", 1, "QQMO", 0., 0., dzmo, 0, "ONLY"); | |
fe4da5cc | 149 | |
150 | ||
151 | // 30-90 | |
152 | tpar[0] = 0.; | |
153 | tpar[1] = 3.; | |
154 | tpar[2] = 30.; | |
cfce8870 | 155 | gMC->Gsvolu("QDT2", "TUBE", idtmed[2015], tpar, 3); |
fe4da5cc | 156 | |
157 | tpar[0] = 2.9; | |
cfce8870 | 158 | gMC->Gsvolu("QTB2", "TUBE", idtmed[2004], tpar, 3); |
159 | gMC->Gspos("QTB2", 1, "QDT2", 0., 0., 0., 0, "ONLY"); | |
160 | gMC->Gspos("QDT2", 1, "QQMO", 0., 0., dzmo, 0, "ONLY"); | |
fe4da5cc | 161 | |
162 | // beam pipe outside absorber on the left side | |
163 | ||
164 | ||
165 | ||
b43eb0dc | 166 | // -30 - kZFlange |
fe4da5cc | 167 | tpar[0] = 0.; |
168 | tpar[1] = 3.; | |
b43eb0dc | 169 | tpar[2] = (kZFlange - 30)/2; |
cfce8870 | 170 | gMC->Gsvolu("QDT5", "TUBE", idtmed[2015], tpar, 3); |
fe4da5cc | 171 | |
172 | tpar[0] = 2.9; | |
173 | zpos = -30. - tpar[2] + dzmo; | |
cfce8870 | 174 | gMC->Gsvolu("QTB5", "TUBE", idtmed[2004], tpar, 3); |
175 | gMC->Gspos("QTB5", 1, "QDT5", 0., 0., 0., 0, "ONLY"); | |
176 | gMC->Gspos("QDT5", 1, "QQMO", 0., 0., zpos, 0, "ONLY"); | |
fe4da5cc | 177 | |
178 | // STRAIGHT STEEL PIECE | |
179 | ||
b43eb0dc | 180 | zpos = -kZFlange; |
fe4da5cc | 181 | r2 = 2.9; |
182 | dr = .015; | |
183 | tpar[0] = 0.; | |
184 | tpar[1] = r2 + dr; | |
185 | tpar[2] = (zpos + 700.) / 2.; | |
cfce8870 | 186 | gMC->Gsvolu("QDT7", "TUBE", idtmed[2015], tpar, 3); |
fe4da5cc | 187 | tpar[0] = r2; |
cfce8870 | 188 | gMC->Gsvolu("QTB7", "TUBE", idtmed[2018], tpar, 3); |
189 | gMC->Gspos("QTB7", 1, "QDT7", 0., 0., 0., 0, "ONLY"); | |
fe4da5cc | 190 | zpos = zpos - tpar[2] + dzmo; |
cfce8870 | 191 | gMC->Gspos("QDT7", 1, "QQMO", 0., 0., zpos, 0, "ONLY"); |
fe4da5cc | 192 | |
193 | // flange dn 63 | |
194 | ||
195 | tpar[0] = 3.; | |
196 | tpar[1] = 5.7; | |
197 | tpar[2] = 2.; | |
cfce8870 | 198 | gMC->Gsvolu("QN63", "TUBE", idtmed[2018], tpar, 3); |
b43eb0dc | 199 | zpos = tpar[2] - kZFlange; |
cfce8870 | 200 | gMC->Gspos("QN63", 1, "ALIC", 0., 0., zpos, 0, "ONLY"); |
fe4da5cc | 201 | |
202 | ||
203 | // Replace Absorber or Shield by Beam-Pipe | |
204 | // in case they are not selected | |
205 | ||
b8032157 | 206 | if (gAlice->GetModule("ABSO") == 0) { |
fe4da5cc | 207 | |
b43eb0dc | 208 | gMC->Gspos("QN63", 2, "ALIC", 0., 0., kZFlange, 0, "ONLY"); |
fe4da5cc | 209 | r2 = 2.9; |
210 | dr = .1; | |
211 | tpar[0] = 0.; | |
212 | tpar[1] = r2 + dr; | |
b43eb0dc | 213 | tpar[2] = (kZFlange - absorberDistance) / 2.; |
cfce8870 | 214 | gMC->Gsvolu("QDT8", "TUBE", idtmed[2015], tpar, 3); |
fe4da5cc | 215 | tpar[0] = r2; |
cfce8870 | 216 | gMC->Gsvolu("QTB8", "TUBE", idtmed[2004], tpar, 3); |
217 | gMC->Gspos("QTB8", 1, "QDT8", 0., 0., 0., 0, "ONLY"); | |
b43eb0dc | 218 | zpos = absorberDistance + tpar[2]; |
cfce8870 | 219 | gMC->Gspos("QDT8", 1, "ALIC", 0., 0., zpos, 0, "ONLY"); |
fe4da5cc | 220 | dr = .015; |
221 | tpar[0] = 0.; | |
222 | tpar[1] = r2 + dr; | |
b43eb0dc | 223 | tpar[2] = (absorberEnd - kZFlange) / 2.; |
cfce8870 | 224 | gMC->Gsvolu("QDTS", "TUBE", idtmed[2015], tpar, 3); |
fe4da5cc | 225 | tpar[0] = r2; |
cfce8870 | 226 | gMC->Gsvolu("QTBS", "TUBE", idtmed[2018], tpar, 3); |
227 | gMC->Gspos("QTBS", 1, "QDTS", 0., 0., 0., 0, "ONLY"); | |
b43eb0dc | 228 | zpos = tpar[2] + kZFlange; |
cfce8870 | 229 | gMC->Gspos("QDTS", 1, "ALIC", 0., 0., zpos, 0, "ONLY"); |
fe4da5cc | 230 | } |
b8032157 | 231 | if (gAlice->GetModule("SHIL") == 0) { |
fe4da5cc | 232 | r2 = 2.9; |
233 | dr = .015; | |
234 | tpar[0] = 0.; | |
235 | tpar[1] = r2 + dr; | |
b43eb0dc | 236 | tpar[2] = (700. - absorberEnd) / 2.; |
cfce8870 | 237 | gMC->Gsvolu("QDT9", "TUBE", idtmed[2015], tpar, 3); |
fe4da5cc | 238 | tpar[0] = r2; |
cfce8870 | 239 | gMC->Gsvolu("QTB9", "TUBE", idtmed[2018], tpar, 3); |
240 | gMC->Gspos("QTB9", 1, "QDT9", 0., 0., 0., 0, "ONLY"); | |
b43eb0dc | 241 | zpos = absorberEnd + tpar[2]; |
cfce8870 | 242 | gMC->Gspos("QDT9", 1, "ALIC", 0., 0., zpos, 0, "ONLY"); |
fe4da5cc | 243 | } |
244 | } | |
245 | ||
246 | //_____________________________________________________________________________ | |
b8032157 | 247 | void AliPIPEv1::DrawModule() |
fe4da5cc | 248 | { |
249 | // | |
250 | // Draw a shaded view of the Beam Pipe | |
251 | // | |
252 | ||
fe4da5cc | 253 | // Set everything unseen |
cfce8870 | 254 | gMC->Gsatt("*", "seen", -1); |
fe4da5cc | 255 | // |
256 | // Set ALIC mother transparent | |
cfce8870 | 257 | gMC->Gsatt("ALIC","SEEN",0); |
fe4da5cc | 258 | // |
259 | // Set the volumes visible | |
cfce8870 | 260 | gMC->Gsatt("QQMO","seen",1); |
261 | gMC->Gsatt("QDT1","seen",1); | |
262 | gMC->Gsatt("QTB1","seen",1); | |
263 | gMC->Gsatt("QDT2","seen",1); | |
264 | gMC->Gsatt("QTB2","seen",1); | |
265 | gMC->Gsatt("QDT5","seen",1); | |
266 | gMC->Gsatt("QTB5","seen",1); | |
267 | gMC->Gsatt("QDT7","seen",1); | |
268 | gMC->Gsatt("QTB7","seen",1); | |
269 | gMC->Gsatt("QN63","seen",1); | |
fe4da5cc | 270 | // |
cfce8870 | 271 | gMC->Gdopt("hide", "on"); |
272 | gMC->Gdopt("shad", "on"); | |
273 | gMC->Gsatt("*", "fill", 7); | |
274 | gMC->SetClipBox("."); | |
275 | gMC->SetClipBox("*", 0, 3000, -3000, 3000, -6000, 6000); | |
276 | gMC->DefaultRange(); | |
277 | gMC->Gdraw("alic", 40, 30, 0, 3, 5, .04, .04); | |
278 | gMC->Gdhead(1111, "Beam Pipe"); | |
279 | gMC->Gdman(16, 6, "MAN"); | |
280 | gMC->Gdopt("hide","off"); | |
fe4da5cc | 281 | } |
282 | ||
283 | //_____________________________________________________________________________ | |
284 | void AliPIPEv1::CreateMaterials() | |
285 | { | |
286 | // | |
287 | // Create materials for beam pipe | |
288 | // | |
289 | ||
b43eb0dc | 290 | Int_t isxfld = gAlice->Field()->Integ(); |
291 | Float_t sxmgmx = gAlice->Field()->Max(); | |
fe4da5cc | 292 | |
293 | Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 }; | |
294 | Float_t zsteel[4] = { 26.,24.,28.,14. }; | |
295 | Float_t wsteel[4] = { .715,.18,.1,.005 }; | |
296 | ||
297 | Float_t epsil, stmin, tmaxfd, deemax, stemax; | |
298 | ||
299 | // STEEL | |
300 | ||
301 | ||
302 | // --- Define the various materials for GEANT --- | |
303 | AliMaterial(5, "BERILLIUM$", 9.01, 4., 1.848, 35.3, 36.7); | |
304 | AliMaterial(16, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
305 | AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); | |
306 | AliMixture(19, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
307 | ||
308 | // **************** | |
309 | // Defines tracking media parameters. | |
310 | // Les valeurs sont commentees pour laisser le defaut | |
311 | // a GEANT (version 3-21, page CONS200), f.m. | |
312 | epsil = .001; // Tracking precision, | |
313 | stemax = -1.; // Maximum displacement for multiple scat | |
314 | tmaxfd = -20.; // Maximum angle due to field deflection | |
315 | deemax = -.3; // Maximum fractional energy loss, DLS | |
316 | stmin = -.8; | |
317 | ||
318 | // Air | |
319 | ||
b43eb0dc | 320 | AliMedium(15, "AIR_L3_US", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc | 321 | |
322 | // Beryllium | |
323 | ||
b43eb0dc | 324 | AliMedium(5, "BE_L3_US", 5, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc | 325 | |
326 | // Vacuum | |
327 | ||
b43eb0dc | 328 | AliMedium(16, "VA_L3_US", 16, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc | 329 | |
330 | // Steel | |
331 | ||
b43eb0dc | 332 | AliMedium(19, "ST_L3_US", 19, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc | 333 | } |
334 |