]>
Commit | Line | Data |
---|---|---|
1df5fa54 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* $Id$*/ | |
17 | ||
18 | #include "TFlukaConfigOption.h" | |
fb2cbbec | 19 | #include "TFlukaMCGeometry.h" |
20 | #include "TFluka.h" | |
21 | #include "TFlukaCerenkov.h" | |
22 | ||
23 | #include <TString.h> | |
f79639f2 | 24 | #include <TList.h> |
fb2cbbec | 25 | #include <TObjArray.h> |
26 | #include <TVirtualMC.h> | |
27 | #include <TGeoMaterial.h> | |
f79639f2 | 28 | #include <TGeoMedium.h> |
29 | #include <TGeoManager.h> | |
30 | #include <TGeoMedium.h> | |
fb2cbbec | 31 | |
32 | Float_t TFlukaConfigOption::fgMatMin(-1.); | |
33 | Float_t TFlukaConfigOption::fgMatMax(-1.); | |
34 | FILE* TFlukaConfigOption::fgFile(0x0); | |
35 | TFlukaMCGeometry* TFlukaConfigOption::fgGeom(0x0); | |
36 | ||
37 | Double_t TFlukaConfigOption::fgDCutValue[11]; | |
38 | Int_t TFlukaConfigOption::fgDProcessFlag[15]; | |
39 | ||
40 | ||
1df5fa54 | 41 | ClassImp(TFlukaConfigOption) |
42 | ||
43 | ||
44 | TFlukaConfigOption::TFlukaConfigOption() | |
45 | { | |
46 | // Default constructor | |
fb2cbbec | 47 | fMedium = -1; |
48 | fCMatMin = -1.; | |
49 | fCMatMax = -1.; | |
50 | Int_t i; | |
51 | for (i = 0; i < 11; i++) fCutValue[i] = -1.; | |
52 | for (i = 0; i < 15; i++) fProcessFlag[i] = -1; | |
1df5fa54 | 53 | } |
54 | ||
55 | ||
fb2cbbec | 56 | TFlukaConfigOption::TFlukaConfigOption(Int_t medium) |
1df5fa54 | 57 | { |
58 | // Constructor | |
fb2cbbec | 59 | fMedium = medium; |
60 | fCMatMin = -1.; | |
61 | fCMatMax = -1.; | |
62 | Int_t i; | |
63 | for (i = 0; i < 11; i++) fCutValue[i] = -1.; | |
64 | for (i = 0; i < 15; i++) fProcessFlag[i] = -1; | |
1df5fa54 | 65 | } |
66 | ||
fb2cbbec | 67 | void TFlukaConfigOption::SetCut(const char* flagname, Double_t val) |
1df5fa54 | 68 | { |
fb2cbbec | 69 | // Set a cut value |
70 | const TString cuts[11] = | |
71 | {"CUTGAM", "CUTELE", "CUTNEU", "CUTHAD", "CUTMUO", "BCUTE", "BCUTM", "DCUTE", "DCUTM", "PPCUTM", "TOFMAX"}; | |
72 | Int_t i; | |
73 | for (i = 0; i < 11; i++) { | |
74 | if (cuts[i].CompareTo(flagname) == 0) { | |
75 | fCutValue[i] = val; | |
76 | if (fMedium == -1) fgDCutValue[i] = val; | |
77 | break; | |
78 | } | |
79 | } | |
1df5fa54 | 80 | } |
81 | ||
fb2cbbec | 82 | void TFlukaConfigOption::SetProcess(const char* flagname, Int_t flag) |
83 | { | |
84 | // Set a process flag | |
85 | const TString process[15] = | |
86 | {"DCAY", "PAIR", "COMP", "PHOT", "PFIS", "DRAY", "ANNI", "BREM", "MUNU", "CKOV", | |
87 | "HADR", "LOSS", "MULS", "RAYL", "STRA"}; | |
37656ca5 | 88 | |
fb2cbbec | 89 | Int_t i; |
90 | for (i = 0; i < 15; i++) { | |
91 | if (process[i].CompareTo(flagname) == 0) { | |
92 | fProcessFlag[i] = flag; | |
93 | if (fMedium == -1) fgDProcessFlag[i] = flag; | |
94 | break; | |
95 | } | |
96 | } | |
97 | } | |
1df5fa54 | 98 | |
fb2cbbec | 99 | void TFlukaConfigOption::WriteFlukaInputCards() |
1df5fa54 | 100 | { |
fb2cbbec | 101 | // Write the FLUKA input cards for the set of process flags and cuts |
102 | // | |
103 | // | |
f79639f2 | 104 | // |
105 | // Check if global option or medium specific | |
106 | ||
107 | Bool_t mediumIsSensitive = kFALSE; | |
108 | TGeoMedium* med = 0x0; | |
109 | TGeoMedium* medium = 0x0; | |
110 | TGeoMaterial* mat = 0x0; | |
111 | ||
81f1d030 | 112 | if (fMedium != -1) { |
89aa6d28 | 113 | TFluka* fluka = (TFluka*) gMC; |
81f1d030 | 114 | fMedium = fgGeom->GetFlukaMaterial(fMedium); |
115 | // | |
116 | // Check if material is actually used | |
117 | Int_t* reglist; | |
118 | Int_t nreg; | |
119 | reglist = fgGeom->GetMaterialList(fMedium, nreg); | |
120 | if (nreg == 0) { | |
cbd7b44e | 121 | // Material not used -- return |
81f1d030 | 122 | return; |
123 | } | |
f79639f2 | 124 | // |
125 | // Find material | |
89aa6d28 | 126 | TObjArray *matList = fluka->GetFlukaMaterials(); |
127 | Int_t nmaterial = matList->GetEntriesFast(); | |
8134b16b | 128 | fCMaterial = 0; |
89aa6d28 | 129 | for (Int_t im = 0; im < nmaterial; im++) |
130 | { | |
8134b16b | 131 | fCMaterial = dynamic_cast<TGeoMaterial*> (matList->At(im)); |
132 | Int_t idmat = fCMaterial->GetIndex(); | |
89aa6d28 | 133 | if (idmat == fMedium) break; |
f79639f2 | 134 | } // materials |
135 | // | |
136 | // Find medium | |
137 | TList *medlist = gGeoManager->GetListOfMedia(); | |
138 | TIter next(medlist); | |
139 | while((med = (TGeoMedium*)next())) | |
140 | { | |
141 | mat = med->GetMaterial(); | |
142 | if (mat->GetIndex() == fMedium) { | |
143 | medium = med; | |
144 | break; | |
145 | } | |
146 | } // media | |
147 | // | |
148 | // Check if sensitive | |
149 | if (medium->GetParam(0) != 0.) mediumIsSensitive = kTRUE; | |
150 | ||
89aa6d28 | 151 | |
8134b16b | 152 | fprintf(fgFile,"*\n*Material specific process and cut settings for #%8d %s\n", fMedium, fCMaterial->GetName()); |
fb2cbbec | 153 | fCMatMin = fMedium; |
154 | fCMatMax = fMedium; | |
155 | } else { | |
156 | fprintf(fgFile,"*\n*Global process and cut settings \n"); | |
157 | fCMatMin = fgMatMin; | |
158 | fCMatMax = fgMatMax; | |
159 | } | |
160 | ||
161 | // | |
162 | // Handle Process Flags | |
f79639f2 | 163 | // |
164 | // | |
165 | // First make sure that all cuts are taken into account | |
166 | if (DefaultProcessFlag(kPAIR) > 0 && fProcessFlag[kPAIR] == -1 && (fCutValue[kCUTELE] >= 0. || fCutValue[kPPCUTM] >= 0.)) | |
167 | fProcessFlag[kPAIR] = DefaultProcessFlag(kPAIR); | |
168 | if (DefaultProcessFlag(kBREM) > 0 && fProcessFlag[kBREM] == -1 && (fCutValue[kBCUTE] >= 0. || fCutValue[kBCUTM] >= 0.)) | |
169 | fProcessFlag[kBREM] = DefaultProcessFlag(kBREM); | |
170 | if (DefaultProcessFlag(kDRAY) > 0 && fProcessFlag[kDRAY] == -1 && (fCutValue[kDCUTE] >= 0. || fCutValue[kDCUTM] >= 0.)) | |
171 | fProcessFlag[kDRAY] = DefaultProcessFlag(kDRAY); | |
fb2cbbec | 172 | // |
f79639f2 | 173 | // |
fb2cbbec | 174 | if (fProcessFlag[kDCAY] != -1) ProcessDCAY(); |
175 | if (fProcessFlag[kPAIR] != -1) ProcessPAIR(); | |
176 | if (fProcessFlag[kBREM] != -1) ProcessBREM(); | |
177 | if (fProcessFlag[kCOMP] != -1) ProcessCOMP(); | |
178 | if (fProcessFlag[kPHOT] != -1) ProcessPHOT(); | |
179 | if (fProcessFlag[kPFIS] != -1) ProcessPFIS(); | |
180 | if (fProcessFlag[kANNI] != -1) ProcessANNI(); | |
181 | if (fProcessFlag[kMUNU] != -1) ProcessMUNU(); | |
182 | if (fProcessFlag[kHADR] != -1) ProcessHADR(); | |
183 | if (fProcessFlag[kMULS] != -1) ProcessMULS(); | |
184 | if (fProcessFlag[kRAYL] != -1) ProcessRAYL(); | |
185 | ||
186 | if (fProcessFlag[kLOSS] != -1 || fProcessFlag[kDRAY] != -1) ProcessLOSS(); | |
187 | if ((fMedium == -1 && fProcessFlag[kCKOV] > 0) || (fMedium > -1 && fProcessFlag[kCKOV] != -1)) ProcessCKOV(); | |
188 | ||
189 | // | |
190 | // Handle Cuts | |
191 | // | |
192 | if (fCutValue[kCUTGAM] >= 0.) ProcessCUTGAM(); | |
193 | if (fCutValue[kCUTELE] >= 0.) ProcessCUTELE(); | |
194 | if (fCutValue[kCUTNEU] >= 0.) ProcessCUTNEU(); | |
195 | if (fCutValue[kCUTHAD] >= 0.) ProcessCUTHAD(); | |
196 | if (fCutValue[kCUTMUO] >= 0.) ProcessCUTMUO(); | |
f79639f2 | 197 | // |
198 | // Time of flight | |
fb2cbbec | 199 | if (fCutValue[kTOFMAX] >= 0.) ProcessTOFMAX(); |
f79639f2 | 200 | |
201 | // | |
202 | // Tracking precission | |
203 | if (mediumIsSensitive) ProcessSensitiveMedium(); | |
1df5fa54 | 204 | } |
205 | ||
fb2cbbec | 206 | void TFlukaConfigOption::ProcessDCAY() |
1df5fa54 | 207 | { |
fb2cbbec | 208 | // Process DCAY option |
209 | fprintf(fgFile,"*\n* --- DCAY --- Decays. Flag = %5d\n", fProcessFlag[kDCAY]); | |
210 | if (fProcessFlag[kDCAY] == 0) { | |
211 | printf("Decays cannot be switched off \n"); | |
212 | } else { | |
213 | fprintf(fgFile, "* Decays are on by default\n"); | |
214 | } | |
215 | } | |
216 | ||
217 | ||
218 | void TFlukaConfigOption::ProcessPAIR() | |
219 | { | |
220 | // Process PAIR option | |
81f1d030 | 221 | fprintf(fgFile,"*\n* --- PAIR --- Pair production by gammas, muons and hadrons. Flag = %5d, PPCUTM = %13.4g, PPCUTE = %13.4g\n", |
222 | fProcessFlag[kPAIR], fCutValue[kCUTELE], fCutValue[kPPCUTM]); | |
fb2cbbec | 223 | // |
224 | // gamma -> e+ e- | |
225 | // | |
226 | if (fProcessFlag[kPAIR] > 0) { | |
81f1d030 | 227 | fprintf(fgFile,"EMFCUT %10.1f%10.1f%10.4g%10.1f%10.1f%10.1fPHOT-THR\n",0., 0., 0.0, fCMatMin, fCMatMax, 1.); |
fb2cbbec | 228 | } else { |
229 | fprintf(fgFile,"EMFCUT %10.1f%10.1f%10.4g%10.1f%10.1f%10.1fPHOT-THR\n",0., 0., 1e10, fCMatMin, fCMatMax, 1.); | |
230 | } | |
231 | ||
232 | // | |
233 | // Direct pair production by Muons and Hadrons | |
234 | // | |
235 | // | |
236 | // Attention ! This card interferes with BREM | |
237 | // | |
238 | ||
239 | if (fProcessFlag[kBREM] == -1 ) fProcessFlag[kBREM] = fgDProcessFlag[kBREM]; | |
240 | if (fCutValue[kBCUTM] == -1.) fCutValue[kBCUTM] = fgDCutValue[kBCUTM]; | |
241 | ||
242 | ||
243 | Float_t flag = -3.; | |
244 | if (fProcessFlag[kPAIR] > 0 && fProcessFlag[kBREM] == 0) flag = 1.; | |
245 | if (fProcessFlag[kPAIR] == 0 && fProcessFlag[kBREM] > 0) flag = 2.; | |
246 | if (fProcessFlag[kPAIR] > 0 && fProcessFlag[kBREM] > 0) flag = 3.; | |
247 | if (fProcessFlag[kPAIR] == 0 && fProcessFlag[kBREM] == 0) flag = -3.; | |
248 | // Flag BREM card as handled | |
37656ca5 | 249 | fProcessFlag[kBREM] = - fProcessFlag[kBREM]; |
fb2cbbec | 250 | |
251 | // | |
252 | // Energy cut for pair prodution | |
253 | // | |
254 | Float_t cutP = fCutValue[kPPCUTM]; | |
255 | if (fCutValue[kPPCUTM] == -1.) cutP = fgDCutValue[kPPCUTM]; | |
256 | // In G3 this is the cut on the total energy of the e+e- pair | |
257 | // In FLUKA the cut is on the kinetic energy of the electron and poistron | |
258 | cutP = cutP / 2. - 0.51099906e-3; | |
259 | if (cutP < 0.) cutP = 0.; | |
260 | // No explicite generation of e+/e- | |
261 | if (fProcessFlag[kPAIR] == 2) cutP = -1.; | |
262 | // | |
263 | // Energy cut for bremsstrahlung | |
264 | // | |
265 | Float_t cutB = 0.; | |
266 | if (flag > 1.) { | |
267 | fprintf(fgFile,"*\n* +++ BREM --- Bremsstrahlung by muons/hadrons. Flag = %5d, BCUTM = %13.4g \n", | |
268 | fProcessFlag[kBREM], fCutValue[kBCUTM]); | |
269 | ||
270 | cutB = fCutValue[kBCUTM]; | |
271 | // No explicite production of gammas | |
272 | if (fProcessFlag[kBREM] == 2) cutB = -1.; | |
273 | } | |
274 | ||
275 | fprintf(fgFile,"PAIRBREM %10.1f%10.4g%10.4g%10.1f%10.1f\n",flag, cutP, cutB, fCMatMin, fCMatMax); | |
276 | } | |
277 | ||
278 | ||
279 | void TFlukaConfigOption::ProcessBREM() | |
280 | { | |
281 | // Process BREM option | |
282 | fprintf(fgFile,"*\n* --- BREM --- Bremsstrahlung by e+/- and muons/hadrons. Flag = %5d, BCUTE = %13.4g, BCUTM = %13.4g \n", | |
283 | fProcessFlag[kBREM], fCutValue[kBCUTE], fCutValue[kBCUTM]); | |
284 | ||
285 | // | |
286 | // e+/- -> e+/- gamma | |
287 | // | |
288 | Float_t cutB = fCutValue[kBCUTE]; | |
289 | if (fCutValue[kBCUTE] == -1.) cutB = fgDCutValue[kBCUTE]; | |
290 | ||
291 | ||
37656ca5 | 292 | if (TMath::Abs(fProcessFlag[kBREM]) > 0) { |
fb2cbbec | 293 | fprintf(fgFile,"EMFCUT %10.4g%10.1f%10.1f%10.1f%10.1f%10.1fELPO-THR\n",cutB, 0., 0., fCMatMin, fCMatMax, 1.); |
294 | } else { | |
295 | fprintf(fgFile,"EMFCUT %10.4g%10.1f%10.1f%10.1f%10.1f%10.1fELPO-THR\n",1.e10, 0., 0., fCMatMin, fCMatMax, 1.); | |
296 | } | |
297 | ||
298 | // | |
299 | // Bremsstrahlung by muons and hadrons | |
300 | // | |
301 | cutB = fCutValue[kBCUTM]; | |
302 | if (fCutValue[kBCUTM] == -1.) cutB = fgDCutValue[kBCUTM]; | |
303 | if (fProcessFlag[kBREM] == 2) cutB = -1.; | |
304 | Float_t flag = 2.; | |
305 | if (fProcessFlag[kBREM] == 0) flag = -2.; | |
306 | ||
307 | fprintf(fgFile,"PAIRBREM %10.1f%10.4g%10.4g%10.1f%10.1f\n", flag, 0., cutB, fCMatMin, fCMatMax); | |
308 | } | |
309 | ||
310 | void TFlukaConfigOption::ProcessCOMP() | |
311 | { | |
312 | // Process COMP option | |
313 | fprintf(fgFile,"*\n* --- COMP --- Compton scattering Flag = %5d \n", fProcessFlag[kCOMP]); | |
314 | ||
315 | // | |
316 | // Compton scattering | |
317 | // | |
318 | ||
319 | if (fProcessFlag[kCOMP] > 0) { | |
320 | fprintf(fgFile,"EMFCUT %10.1f%10.1f%10.1f%10.1f%10.1f%10.1fPHOT-THR\n",0. , 0., 0., fCMatMin, fCMatMax, 1.); | |
321 | } else { | |
322 | fprintf(fgFile,"EMFCUT %10.4g%10.1f%10.1f%10.1f%10.1f%10.1fPHOT-THR\n",1.e10, 0., 0., fCMatMin, fCMatMax, 1.); | |
323 | } | |
324 | } | |
325 | ||
326 | void TFlukaConfigOption::ProcessPHOT() | |
327 | { | |
328 | // Process PHOS option | |
329 | fprintf(fgFile,"*\n* --- PHOT --- Photoelectric effect. Flag = %5d\n", fProcessFlag[kPHOT]); | |
330 | ||
331 | // | |
332 | // Photoelectric effect | |
333 | // | |
334 | ||
335 | if (fProcessFlag[kPHOT] > 0) { | |
81f1d030 | 336 | fprintf(fgFile,"EMFCUT %10.4g%10.4g%10.4g%10.1f%10.1f%10.1fPHOT-THR\n",0., 0., 0., fCMatMin, fCMatMax, 1.); |
fb2cbbec | 337 | } else { |
338 | fprintf(fgFile,"EMFCUT %10.1f%10.4g%10.1f%10.1f%10.1f%10.1fPHOT-THR\n",0., 1.e10, 0., fCMatMin, fCMatMax, 1.); | |
339 | } | |
340 | } | |
341 | ||
342 | void TFlukaConfigOption::ProcessANNI() | |
343 | { | |
344 | // Process ANNI option | |
345 | fprintf(fgFile,"*\n* --- ANNI --- Positron annihilation. Flag = %5d \n", fProcessFlag[kANNI]); | |
346 | ||
347 | // | |
348 | // Positron annihilation | |
349 | // | |
350 | ||
351 | if (fProcessFlag[kANNI] > 0) { | |
352 | fprintf(fgFile,"EMFCUT %10.1f%10.1f%10.1f%10.1f%10.1f%10.1fANNH-THR\n",0. , 0., 0., fCMatMin, fCMatMax, 1.); | |
353 | } else { | |
354 | fprintf(fgFile,"EMFCUT %10.4g%10.1f%10.1f%10.1f%10.1f%10.1fANNH-THR\n",1.e10, 0., 0., fCMatMin, fCMatMax, 1.); | |
355 | } | |
356 | } | |
357 | ||
358 | ||
359 | void TFlukaConfigOption::ProcessPFIS() | |
360 | { | |
361 | // Process PFIS option | |
362 | fprintf(fgFile,"*\n* --- PFIS --- Photonuclear interaction Flag = %5d\n", fProcessFlag[kPFIS]); | |
363 | ||
364 | // | |
365 | // Photonuclear interactions | |
366 | // | |
367 | ||
368 | if (fProcessFlag[kPFIS] > 0) { | |
369 | fprintf(fgFile,"PHOTONUC %10.1f%10.1f%10.1f%10.1f%10.1f%10.1f\n",(Float_t) fProcessFlag[kPFIS], 0., 0., fCMatMin, fCMatMax, 1.); | |
370 | } else { | |
371 | fprintf(fgFile,"PHOTONUC %10.1f%10.1f%10.1f%10.1f%10.1f%10.1f\n",-1. , 0., 0., fCMatMin, fCMatMax, 1.); | |
372 | } | |
373 | } | |
374 | ||
375 | void TFlukaConfigOption::ProcessMUNU() | |
376 | { | |
377 | // Process MUNU option | |
378 | fprintf(fgFile,"*\n* --- MUNU --- Muon nuclear interaction. Flag = %5d\n", fProcessFlag[kMUNU]); | |
379 | ||
380 | // | |
381 | // Muon nuclear interactions | |
382 | // | |
383 | if (fProcessFlag[kMUNU] > 0) { | |
384 | fprintf(fgFile,"MUPHOTON %10.1f%10.3f%10.3f%10.1f%10.1f%10.1f\n",(Float_t )fProcessFlag[kMUNU], 0.25, 0.75, fCMatMin, fCMatMax, 1.); | |
385 | } else { | |
386 | fprintf(fgFile,"MUPHOTON %10.1f%10.1f%10.1f%10.1f%10.1f%10.1f\n",-1. , 0., 0., fCMatMin, fCMatMax, 1.); | |
387 | } | |
388 | } | |
389 | ||
390 | void TFlukaConfigOption::ProcessRAYL() | |
391 | { | |
392 | // Process RAYL option | |
393 | fprintf(fgFile,"*\n* --- RAYL --- Rayleigh Scattering. Flag = %5d\n", fProcessFlag[kRAYL]); | |
394 | ||
395 | // | |
396 | // Rayleigh scattering | |
397 | // | |
398 | Int_t nreg; | |
399 | Int_t* reglist = fgGeom->GetMaterialList(fMedium, nreg); | |
400 | // | |
401 | // Loop over regions of a given material | |
402 | for (Int_t k = 0; k < nreg; k++) { | |
403 | Float_t ireg = reglist[k]; | |
404 | if (fProcessFlag[kRAYL] > 0) { | |
405 | fprintf(fgFile,"EMFRAY %10.1f%10.1f%10.1f%10.1f\n", 1., ireg, ireg, 1.); | |
406 | } else { | |
407 | fprintf(fgFile,"EMFRAY %10.1f%10.1f%10.1f%10.1f\n", 3., ireg, ireg, 1.); | |
408 | } | |
409 | } | |
410 | } | |
411 | ||
412 | void TFlukaConfigOption::ProcessCKOV() | |
413 | { | |
414 | // Process CKOV option | |
415 | fprintf(fgFile,"*\n* --- CKOV --- Cerenkov Photon production. %5d\n", fProcessFlag[kCKOV]); | |
416 | ||
417 | // | |
418 | // Cerenkov photon production | |
419 | // | |
420 | ||
421 | TFluka* fluka = (TFluka*) gMC; | |
422 | TObjArray *matList = fluka->GetFlukaMaterials(); | |
423 | Int_t nmaterial = matList->GetEntriesFast(); | |
424 | for (Int_t im = 0; im < nmaterial; im++) | |
425 | { | |
426 | TGeoMaterial* material = dynamic_cast<TGeoMaterial*> (matList->At(im)); | |
427 | Int_t idmat = material->GetIndex(); | |
428 | // | |
429 | // Check if global option | |
430 | if (fMedium != -1 && idmat != fMedium) continue; | |
431 | ||
432 | TFlukaCerenkov* cerenkovProp; | |
433 | if (!(cerenkovProp = dynamic_cast<TFlukaCerenkov*>(material->GetCerenkovProperties()))) continue; | |
434 | // | |
435 | // This medium has Cerenkov properties | |
436 | // | |
437 | // | |
438 | if (fMedium == -1 || (fMedium != -1 && fProcessFlag[kCKOV] > 0)) { | |
439 | // Write OPT-PROD card for each medium | |
440 | Float_t emin = cerenkovProp->GetMinimumEnergy(); | |
441 | Float_t emax = cerenkovProp->GetMaximumEnergy(); | |
442 | fprintf(fgFile, "OPT-PROD %10.4g%10.4g%10.4g%10.4g%10.4g%10.4gCERENKOV\n", emin, emax, 0., | |
443 | Float_t(idmat), Float_t(idmat), 0.); | |
444 | // | |
445 | // Write OPT-PROP card for each medium | |
446 | // Forcing FLUKA to call user routines (queffc.cxx, rflctv.cxx, rfrndx.cxx) | |
447 | // | |
448 | fprintf(fgFile, "OPT-PROP %10.4g%10.4g%10.4g%10.1f%10.1f%10.1fWV-LIMIT\n", | |
449 | cerenkovProp->GetMinimumWavelength(), cerenkovProp->GetMaximumWavelength(), cerenkovProp->GetMaximumWavelength(), | |
450 | Float_t(idmat), Float_t(idmat), 0.0); | |
451 | ||
2906553d | 452 | |
453 | fprintf(fgFile, "OPT-PROP %10.1f%10.1f%10.1f%10.1f%10.1f%10.1f\n", -100., -100., -100., | |
454 | Float_t(idmat), Float_t(idmat), 0.0); | |
fb2cbbec | 455 | |
456 | for (Int_t j = 0; j < 3; j++) { | |
457 | fprintf(fgFile, "OPT-PROP %10.1f%10.1f%10.1f%10.1f%10.1f%10.1f&\n", -100., -100., -100., | |
458 | Float_t(idmat), Float_t(idmat), 0.0); | |
459 | } | |
2906553d | 460 | |
461 | ||
462 | // Photon detection efficiency user defined | |
fb2cbbec | 463 | if (cerenkovProp->IsSensitive()) |
464 | fprintf(fgFile, "OPT-PROP %10.1f%10.1f%10.1f%10.1f%10.1f%10.1fSENSITIV\n", -100., -100., -100., | |
465 | Float_t(idmat), Float_t(idmat), 0.0); | |
2906553d | 466 | // Material has a reflective surface |
467 | if (cerenkovProp->IsMetal()) | |
468 | fprintf(fgFile, "OPT-PROP %10.1f%10.1f%10.1f%10.1f%10.1f%10.1fMETAL\n", -100., -100., -100., | |
469 | Float_t(idmat), Float_t(idmat), 0.0); | |
470 | ||
fb2cbbec | 471 | } else { |
472 | fprintf(fgFile,"OPT-PROD %10.1f%10.1f%10.1f%10.1f%10.1f%10.1fCERE-OFF\n",0., 0., 0., fCMatMin, fCMatMax, 1.); | |
473 | } | |
474 | } | |
475 | } | |
476 | ||
477 | ||
478 | void TFlukaConfigOption::ProcessHADR() | |
479 | { | |
480 | // Process HADR option | |
481 | fprintf(fgFile,"*\n* --- HADR --- Hadronic interactions. Flag = %5d\n", fProcessFlag[kHADR]); | |
482 | ||
483 | if (fProcessFlag[kHADR] > 0) { | |
484 | fprintf(fgFile,"*\n*Hadronic interaction is ON by default in FLUKA\n"); | |
485 | } else { | |
486 | if (fMedium != -1) printf("Hadronic interactions cannot be switched off material by material !\n"); | |
487 | fprintf(fgFile,"THRESHOL %10.1f%10.1f%10.1f%10.1e%10.1f\n",0., 0., 0., 1.e10, 0.); | |
488 | } | |
489 | } | |
490 | ||
491 | ||
492 | ||
493 | void TFlukaConfigOption::ProcessMULS() | |
494 | { | |
495 | // Process MULS option | |
496 | fprintf(fgFile,"*\n* --- MULS --- Muliple Scattering. Flag = %5d\n", fProcessFlag[kMULS]); | |
497 | // | |
498 | // Multiple scattering | |
499 | // | |
500 | if (fProcessFlag[kMULS] > 0) { | |
501 | fprintf(fgFile,"*\n*Multiple scattering is ON by default in FLUKA\n"); | |
502 | } else { | |
503 | fprintf(fgFile,"MULSOPT %10.1f%10.1f%10.1f%10.1f%10.1f\n",0., 3., 3., fCMatMin, fCMatMax); | |
504 | } | |
505 | } | |
506 | ||
507 | void TFlukaConfigOption::ProcessLOSS() | |
508 | { | |
509 | // Process LOSS option | |
510 | fprintf(fgFile,"*\n* --- LOSS --- Ionisation energy loss. Flags: LOSS = %5d, DRAY = %5d, STRA = %5d; Cuts: DCUTE = %13.4g, DCUTM = %13.4g \n", | |
511 | fProcessFlag[kLOSS], fProcessFlag[kDRAY], fProcessFlag[kSTRA], fCutValue[kDCUTE], fCutValue[kDCUTM]); | |
512 | // | |
513 | // Ionisation energy loss | |
514 | // | |
515 | // | |
516 | // Impose consistency | |
517 | ||
518 | if (fProcessFlag[kLOSS] == 1 || fProcessFlag[kLOSS] == 3) { | |
519 | fProcessFlag[kDRAY] = 1; | |
520 | } else if (fProcessFlag[kLOSS] == 2) { | |
521 | fProcessFlag[kDRAY] = 0; | |
522 | fCutValue[kDCUTE] = 1.e10; | |
523 | fCutValue[kDCUTM] = 1.e10; | |
524 | } else { | |
525 | if (fProcessFlag[kDRAY] == 1) { | |
526 | fProcessFlag[kLOSS] = 1; | |
527 | } else if (fProcessFlag[kDRAY] == 0) { | |
528 | fProcessFlag[kLOSS] = 2; | |
529 | fCutValue[kDCUTE] = 1.e10; | |
530 | fCutValue[kDCUTM] = 1.e10; | |
531 | } | |
532 | } | |
533 | ||
534 | if (fCutValue[kDCUTE] == -1.) fCutValue[kDCUTE] = fgDCutValue[kDCUTE]; | |
535 | if (fCutValue[kDCUTM] == -1.) fCutValue[kDCUTM] = fgDCutValue[kDCUTM]; | |
536 | ||
537 | Float_t cutM = fCutValue[kDCUTM]; | |
538 | ||
539 | ||
540 | if (fProcessFlag[kSTRA] == -1) fProcessFlag[kSTRA] = fgDProcessFlag[kSTRA]; | |
541 | if (fProcessFlag[kSTRA] == 0) fProcessFlag[kSTRA] = 1; | |
542 | Float_t stra = (Float_t) fProcessFlag[kSTRA]; | |
543 | ||
544 | ||
545 | if (fProcessFlag[kLOSS] == 1 || fProcessFlag[kLOSS] == 3) { | |
546 | // | |
547 | // Restricted energy loss fluctuations | |
548 | // | |
549 | fprintf(fgFile,"IONFLUCT %10.1f%10.1f%10.1f%10.1f%10.1f\n", 1., 1., stra, fCMatMin, fCMatMax); | |
2906553d | 550 | fprintf(fgFile,"DELTARAY %10.4g%10.1f%10.1f%10.1f%10.1f%10.1f\n", cutM, 0., 0., fCMatMin, fCMatMax, 1.); |
fb2cbbec | 551 | } else if (fProcessFlag[kLOSS] == 4) { |
552 | // | |
553 | // No fluctuations | |
554 | // | |
555 | fprintf(fgFile,"IONFLUCT %10.1f%10.1f%10.1f%10.1f%10.1f\n",-1., -1., stra, fCMatMin, fCMatMax); | |
556 | fprintf(fgFile,"DELTARAY %10.4g%10.1f%10.1f%10.1f%10.1f%10.1f\n", 1.e10, 0., 0., fCMatMin, fCMatMax, 1.); | |
557 | } else { | |
558 | // | |
559 | // Full fluctuations | |
560 | // | |
561 | fprintf(fgFile,"IONFLUCT %10.1f%10.1f%10.1f%10.1f%10.1f\n",1., 1., stra, fCMatMin, fCMatMax); | |
562 | fprintf(fgFile,"DELTARAY %10.4g%10.1f%10.1f%10.1f%10.1f%10.1f\n", 1.e10, 0., 0., fCMatMin, fCMatMax, 1.); | |
563 | } | |
564 | } | |
565 | ||
566 | ||
567 | void TFlukaConfigOption::ProcessCUTGAM() | |
568 | { | |
569 | // Cut on gammas | |
570 | // | |
571 | fprintf(fgFile,"*\n*Cut for Gammas. CUTGAM = %13.4g\n", fCutValue[kCUTGAM]); | |
572 | if (fMedium == -1) { | |
573 | fprintf(fgFile,"EMFCUT %10.4g%10.4g%10.1f%10.1f%10.1f%10.1f\n", | |
574 | 0., fCutValue[kCUTGAM], 0., 0., Float_t(fgGeom->NofVolumes()), 1.); | |
46bee1bf | 575 | |
fb2cbbec | 576 | } else { |
577 | Int_t nreg, *reglist; | |
578 | Float_t ireg; | |
579 | reglist = fgGeom->GetMaterialList(fMedium, nreg); | |
580 | // Loop over regions of a given material | |
581 | for (Int_t k = 0; k < nreg; k++) { | |
582 | ireg = reglist[k]; | |
583 | fprintf(fgFile,"EMFCUT %10.4g%10.4g%10.1f%10.1f%10.1f%10.1f\n", 0.,fCutValue[kCUTGAM], 0., ireg, ireg, 1.); | |
584 | } | |
585 | } | |
8134b16b | 586 | |
587 | // Transport production cut used for pemf | |
588 | // | |
589 | // FUDGEM paramter. The parameter takes into account th contribution of atomic electrons to multiple scattering. | |
590 | // For production and transport cut-offs larger than 100 keV it must be set = 1.0, while in the keV region it must be | |
591 | Float_t parFudgem = (fCutValue[kCUTGAM] > 1.e-4)? 1.0 : 0.0 ; | |
46bee1bf | 592 | fprintf(fgFile,"EMFCUT %10.4g%10.4g%10.1f%10.1f%10.1f%10.1fPROD-CUT\n", |
8134b16b | 593 | 0., fCutValue[kCUTGAM], parFudgem, fCMatMin, fCMatMax, 1.); |
fb2cbbec | 594 | } |
595 | ||
596 | void TFlukaConfigOption::ProcessCUTELE() | |
597 | { | |
598 | // Cut on e+/e- | |
599 | // | |
600 | fprintf(fgFile,"*\n*Cut for e+/e-. CUTELE = %13.4g\n", fCutValue[kCUTELE]); | |
601 | if (fMedium == -1) { | |
602 | fprintf(fgFile,"EMFCUT %10.4g%10.4g%10.1f%10.1f%10.1f%10.1f\n", | |
603 | -fCutValue[kCUTELE], 0., 0., 0., Float_t(fgGeom->NofVolumes()), 1.); | |
604 | } else { | |
605 | Int_t nreg, *reglist; | |
606 | Float_t ireg; | |
607 | reglist = fgGeom->GetMaterialList(fMedium, nreg); | |
608 | // Loop over regions of a given material | |
609 | for (Int_t k = 0; k < nreg; k++) { | |
610 | ireg = reglist[k]; | |
611 | fprintf(fgFile,"EMFCUT %10.4g%10.4g%10.1f%10.1f%10.1f%10.1f\n", -fCutValue[kCUTELE], 0., 0., ireg, ireg, 1.); | |
612 | } | |
613 | } | |
8134b16b | 614 | // Transport production cut used for pemf |
615 | // | |
616 | // FUDGEM paramter. The parameter takes into account th contribution of atomic electrons to multiple scattering. | |
617 | // For production and transport cut-offs larger than 100 keV it must be set = 1.0, while in the keV region it must be | |
618 | Float_t parFudgem = (fCutValue[kCUTELE] > 1.e-4)? 1.0 : 0.0; | |
46bee1bf | 619 | fprintf(fgFile,"EMFCUT %10.4g%10.4g%10.1f%10.1f%10.1f%10.1fPROD-CUT\n", |
8134b16b | 620 | -fCutValue[kCUTELE], 0., parFudgem, fCMatMin, fCMatMax, 1.); |
fb2cbbec | 621 | } |
622 | ||
623 | void TFlukaConfigOption::ProcessCUTNEU() | |
624 | { | |
501e3a8d | 625 | // Cut on neutral hadrons |
626 | fprintf(fgFile,"*\n*Cut for neutral hadrons. CUTNEU = %13.4g\n", fCutValue[kCUTNEU]); | |
627 | ||
628 | // Cut on neutral hadrons | |
629 | fprintf(fgFile,"*\n*Cut for neutral hadrons. CUTNEU = %13.4g\n", fCutValue[kCUTNEU]); | |
630 | ||
631 | // Energy group structure of the 72-neutron ENEA data set: | |
632 | const Float_t neutronGroupUpLimit[72] = { | |
633 | 1.9600E-02, 1.7500E-02, 1.4918E-02, 1.3499E-02, 1.2214E-02, 1.1052E-02, 1.0000E-02, 9.0484E-03, | |
634 | 8.1873E-03, 7.4082E-03, 6.7032E-03, 6.0653E-03, 5.4881E-03, 4.9659E-03, 4.4933E-03, 4.0657E-03, | |
635 | 3.6788E-03, 3.3287E-03, 3.0119E-03, 2.7253E-03, 2.4660E-03, 2.2313E-03, 2.0190E-03, 1.8268E-03, | |
636 | 1.6530E-03, 1.4957E-03, 1.3534E-03, 1.2246E-03, 1.1080E-03, 1.0026E-03, 9.0718E-04, 8.2085E-04, | |
637 | 7.4274E-04, 6.0810E-04, 4.9787E-04, 4.0762E-04, 3.3373E-04, 2.7324E-04, 2.2371E-04, 1.8316E-04, | |
638 | 1.4996E-04, 1.2277E-04, 8.6517E-05, 5.2475E-05, 3.1828E-05, 2.1852E-05, 1.5034E-05, 1.0332E-05, | |
639 | 7.1018E-06, 4.8809E-06, 3.3546E-06, 2.3054E-06, 1.5846E-06, 1.0446E-06, 6.8871E-07, 4.5400E-07, | |
640 | 2.7537E-07, 1.6702E-07, 1.0130E-07, 6.1442E-08, 3.7267E-08, 2.2603E-08, 1.5535E-08, 1.0677E-08, | |
641 | 7.3375E-09, 5.0435E-09, 3.4662E-09, 2.3824E-09, 1.6374E-09, 1.1254E-09, 6.8257E-10, 4.1400E-10 | |
642 | }; | |
643 | ||
644 | Float_t cut = fCutValue[kCUTNEU]; | |
645 | // | |
646 | // 8.0 = Neutron | |
647 | // 9.0 = Antineutron | |
648 | // Find the FLUKA neutron group corresponding to the cut | |
649 | // | |
650 | Float_t neutronCut = cut; | |
651 | Int_t groupCut = 1; // if cut is > 19.6 MeV not low energy neutron transport is done | |
652 | if (neutronCut < 0.0196) { | |
653 | neutronCut = 0.0196; | |
654 | // Search the group cutoff for the energy cut | |
655 | Int_t i; | |
656 | for( i=0; i<72; i++ ) { | |
657 | if (cut > neutronGroupUpLimit[i]) break; | |
658 | } | |
659 | groupCut = i+1; | |
660 | } | |
661 | ||
662 | if (fMedium == -1) { | |
663 | Float_t cut = fCutValue[kCUTNEU]; | |
664 | // 8.0 = Neutron | |
665 | // 9.0 = Antineutron | |
666 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -neutronCut, 8.0, 9.0); | |
667 | fprintf(fgFile,"LOW-BIAS %10.4g%10.4g%10.1f%10.1f%10.1f%10.1f\n", | |
668 | Float_t(groupCut), 73.0, 0.95, 2., Float_t(fgGeom->NofVolumes()), 1.); | |
669 | // | |
2906553d | 670 | // |
fb2cbbec | 671 | // 12.0 = Kaon zero long |
672 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 12.0, 12.0); | |
673 | // 17.0 = Lambda, 18.0 = Antilambda | |
674 | // 19.0 = Kaon zero short | |
675 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 17.0, 19.0); | |
676 | // 22.0 = Sigma zero, Pion zero, Kaon zero | |
677 | // 25.0 = Antikaon zero | |
678 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 22.0, 25.0); | |
679 | // 32.0 = Antisigma zero | |
680 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 32.0, 32.0); | |
681 | // 34.0 = Xi zero | |
682 | // 35.0 = AntiXi zero | |
683 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 34.0, 35.0); | |
684 | // 47.0 = D zero | |
685 | // 48.0 = AntiD zero | |
686 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 47.0, 48.0); | |
687 | // 53.0 = Xi_c zero | |
688 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 53.0, 53.0); | |
689 | // 55.0 = Xi'_c zero | |
690 | // 56.0 = Omega_c zero | |
691 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 55.0, 56.0); | |
692 | // 59.0 = AntiXi_c zero | |
693 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 59.0, 59.0); | |
694 | // 61.0 = AntiXi'_c zero | |
695 | // 62.0 = AntiOmega_c zero | |
696 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 61.0, 62.0); | |
697 | } else { | |
501e3a8d | 698 | Int_t nreg, *reglist; |
699 | Float_t ireg; | |
700 | reglist = fgGeom->GetMaterialList(fMedium, nreg); | |
701 | // Loop over regions of a given material | |
702 | for (Int_t k = 0; k < nreg; k++) { | |
703 | ireg = reglist[k]; | |
704 | fprintf(fgFile,"LOW-BIAS %10.4g%10.4g%10.1f%10.1f%10.1f%10.1f\n", | |
705 | Float_t(groupCut), 73.0, 0.95, ireg, ireg, 1.); | |
706 | } | |
707 | ||
8134b16b | 708 | Warning("ProcessCUTNEU", |
709 | "Material #%4d %s: Cut on neutral hadrons (Ekin > %9.3e) material by material only implemented for low-energy neutrons !\n", | |
710 | fMedium, fCMaterial->GetName(), cut); | |
fb2cbbec | 711 | } |
712 | } | |
713 | ||
714 | void TFlukaConfigOption::ProcessCUTHAD() | |
715 | { | |
716 | // Cut on charged hadrons | |
717 | fprintf(fgFile,"*\n*Cut for charge hadrons. CUTHAD = %13.4g\n", fCutValue[kCUTHAD]); | |
8134b16b | 718 | Float_t cut = fCutValue[kCUTHAD]; |
fb2cbbec | 719 | if (fMedium == -1) { |
fb2cbbec | 720 | // 1.0 = Proton |
721 | // 2.0 = Antiproton | |
722 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 1.0, 2.0); | |
723 | // 13.0 = Positive Pion, Negative Pion, Positive Kaon | |
724 | // 16.0 = Negative Kaon | |
725 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 13.0, 16.0); | |
726 | // 20.0 = Negative Sigma | |
727 | // 21.0 = Positive Sigma | |
728 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 20.0, 21.0); | |
729 | // 31.0 = Antisigma minus | |
730 | // 33.0 = Antisigma plus | |
731 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 31.0, 31.0); | |
732 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 33.0, 33.0); | |
733 | // 36.0 = Negative Xi, Positive Xi, Omega minus | |
734 | // 39.0 = Antiomega | |
735 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 36.0, 39.0); | |
736 | // 45.0 = D plus | |
737 | // 46.0 = D minus | |
738 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 45.0, 46.0); | |
739 | // 49.0 = D_s plus, D_s minus, Lambda_c plus | |
740 | // 52.0 = Xi_c plus | |
741 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 49.0, 52.0); | |
742 | // 54.0 = Xi'_c plus | |
743 | // 60.0 = AntiXi'_c minus | |
744 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 54.0, 54.0); | |
745 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 60.0, 60.0); | |
746 | // 57.0 = Antilambda_c minus | |
747 | // 58.0 = AntiXi_c minus | |
748 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n", -cut, 57.0, 58.0); | |
749 | } else { | |
8134b16b | 750 | Warning("ProcessCUTHAD", |
751 | "Material #%4d %s: Cut on charged hadrons (Ekin > 9.3e) material by material not yet implemented !\n", | |
752 | fMedium, fCMaterial->GetName(), cut); | |
fb2cbbec | 753 | } |
754 | } | |
755 | ||
756 | void TFlukaConfigOption::ProcessCUTMUO() | |
757 | { | |
758 | // Cut on muons | |
759 | fprintf(fgFile,"*\n*Cut for muons. CUTMUO = %13.4g\n", fCutValue[kCUTMUO]); | |
760 | Float_t cut = fCutValue[kCUTMUO]; | |
761 | if (fMedium == -1) { | |
762 | fprintf(fgFile,"PART-THR %10.4g%10.1f%10.1f\n",-cut, 10.0, 11.0); | |
763 | } else { | |
8134b16b | 764 | Warning("ProcessCUTMUO", "Material #%4d %s: Cut on muons (Ekin > %9.3e) material by material not yet implemented !\n", |
765 | fMedium, fCMaterial->GetName(), cut); | |
fb2cbbec | 766 | } |
767 | ||
768 | ||
769 | } | |
770 | ||
771 | void TFlukaConfigOption::ProcessTOFMAX() | |
772 | { | |
773 | // Cut time of flight | |
774 | Float_t cut = fCutValue[kTOFMAX]; | |
775 | fprintf(fgFile,"*\n*Cut on time of flight. TOFMAX = %13.4g\n", fCutValue[kTOFMAX]); | |
776 | fprintf(fgFile,"TIME-CUT %10.4g%10.1f%10.1f%10.1f%10.1f\n",cut*1.e9,0.,0.,-6.0,64.0); | |
1df5fa54 | 777 | } |
f79639f2 | 778 | |
779 | void TFlukaConfigOption::ProcessSensitiveMedium() | |
780 | { | |
781 | // | |
782 | // Special options for sensitive media | |
783 | // | |
784 | ||
785 | fprintf(fgFile,"*\n*Options for sensitive medium \n"); | |
786 | // | |
787 | // EMFFIX | |
788 | fprintf(fgFile,"EMFFIX %10.1f%10.3f%10.1f%10.1f%10.1f%10.1f\n", fCMatMin, 0.05, 0., 0., 0., 0.); | |
789 | // | |
790 | // FLUKAFIX | |
791 | fprintf(fgFile,"FLUKAFIX %10.3f %10.3f\n", 0.05, fCMatMin); | |
792 | } |