| 8495a208 |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| 16 | /* $Id$ */ |
| 17 | |
| 18 | #include <Riostream.h> |
| 19 | |
| 20 | #include "TClonesArray.h" |
| 21 | #include "TFlukaGeo.h" |
| 22 | #include "TCallf77.h" //For the fortran calls |
| 23 | #include "Fdblprc.h" //(DBLPRC) fluka common |
| 24 | #include "Fepisor.h" //(EPISOR) fluka common |
| 25 | #include "Ffinuc.h" //(FINUC) fluka common |
| 26 | #include "Fiounit.h" //(IOUNIT) fluka common |
| 27 | #include "Fpaprop.h" //(PAPROP) fluka common |
| 28 | #include "Fpart.h" //(PART) fluka common |
| 29 | #include "Ftrackr.h" //(TRACKR) fluka common |
| 30 | #include "Fpaprop.h" //(PAPROP) fluka common |
| 31 | #include "Ffheavy.h" //(FHEAVY) fluka common |
| 32 | |
| 33 | #include "TVirtualMC.h" |
| 34 | #include "TGeoManager.h" |
| 35 | #include "TFlukaMCGeometry.h" |
| 36 | |
| 37 | #include "TLorentzVector.h" |
| 38 | |
| 39 | // Fluka methods that may be needed. |
| 40 | #ifndef WIN32 |
| 41 | # define flukam flukam_ |
| 42 | # define fluka_openinp fluka_openinp_ |
| 43 | # define fluka_closeinp fluka_closeinp_ |
| 44 | # define mcihad mcihad_ |
| 45 | # define mpdgha mpdgha_ |
| 46 | #else |
| 47 | # define flukam FLUKAM |
| 48 | # define fluka_openinp FLUKA_OPENINP |
| 49 | # define fluka_closeinp FLUKA_CLOSEINP |
| 50 | # define mcihad MCIHAD |
| 51 | # define mpdgha MPDGHA |
| 52 | #endif |
| 53 | |
| 54 | extern "C" |
| 55 | { |
| 56 | // |
| 57 | // Prototypes for FLUKA functions |
| 58 | // |
| 59 | void type_of_call flukam(const int&); |
| 60 | void type_of_call fluka_openinp(const int&, DEFCHARA); |
| 61 | void type_of_call fluka_closeinp(const int&); |
| 62 | int type_of_call mcihad(const int&); |
| 63 | int type_of_call mpdgha(const int&); |
| 64 | } |
| 65 | |
| 66 | // |
| 67 | // Class implementation for ROOT |
| 68 | // |
| 69 | ClassImp(TFluka) |
| 70 | |
| 71 | // |
| 72 | //---------------------------------------------------------------------------- |
| 73 | // TFluka constructors and destructors. |
| 74 | //______________________________________________________________________________ |
| 75 | TFluka::TFluka() |
| 76 | :TVirtualMC(), |
| 77 | fVerbosityLevel(0), |
| 78 | sInputFileName("") |
| 79 | { |
| 80 | // |
| 81 | // Default constructor |
| 82 | // |
| 83 | fNVolumes = 0; |
| 84 | fCurrentFlukaRegion = -1; |
| 85 | fGeom = 0; |
| 86 | } |
| 87 | |
| 88 | //______________________________________________________________________________ |
| 89 | TFluka::TFluka(const char *title, Int_t verbosity, Bool_t isRootGeometrySupported) |
| 90 | :TVirtualMC("TFluka",title, isRootGeometrySupported), |
| 91 | fVerbosityLevel(verbosity), |
| 92 | sInputFileName(""), |
| 93 | fTrackIsEntering(0), |
| 94 | fTrackIsExiting(0) |
| 95 | { |
| 96 | // create geometry interface |
| 97 | if (fVerbosityLevel >=3) |
| 98 | cout << "<== TFluka::TFluka(" << title << ") constructor called." << endl; |
| 99 | |
| 100 | fNVolumes = 0; |
| 101 | fCurrentFlukaRegion = -1; |
| 102 | fGeom = new TFlukaMCGeometry("geom", "ALICE geometry"); |
| 103 | } |
| 104 | |
| 105 | //______________________________________________________________________________ |
| 106 | TFluka::~TFluka() { |
| 107 | if (fVerbosityLevel >=3) |
| 108 | cout << "==> TFluka::~TFluka() destructor called." << endl; |
| 109 | |
| 110 | delete fGeom; |
| 111 | |
| 112 | if (fVerbosityLevel >=3) |
| 113 | cout << "<== TFluka::~TFluka() destructor called." << endl; |
| 114 | } |
| 115 | |
| 116 | // |
| 117 | //______________________________________________________________________________ |
| 118 | // TFluka control methods |
| 119 | //______________________________________________________________________________ |
| 120 | void TFluka::Init() { |
| 121 | |
| 122 | if (fVerbosityLevel >=3) |
| 123 | cout << "==> TFluka::Init() called." << endl; |
| 124 | |
| 125 | if (!gGeoManager) new TGeoManager("geom", "FLUKA geometry"); |
| 126 | fApplication->ConstructGeometry(); |
| 127 | TGeoVolume *top = (TGeoVolume*)gGeoManager->GetListOfVolumes()->First(); |
| 128 | gGeoManager->SetTopVolume(top); |
| 129 | gGeoManager->CloseGeometry("di"); |
| 130 | gGeoManager->DefaultColors(); // to be removed |
| 131 | fNVolumes = fGeom->NofVolumes(); |
| 132 | printf("== Number of volumes: %i\n ==", fNVolumes); |
| 133 | fGeom->CreateFlukaMatFile("flukaMat.inp"); |
| 134 | cout << "\t* InitPhysics() - Prepare input file to be called" << endl; |
| 135 | // now we have TGeo geometry created and we have to patch alice.inp |
| 136 | // with the material mapping file FlukaMat.inp |
| 137 | InitPhysics(); // prepare input file with the current physics settings |
| 138 | cout << "\t* InitPhysics() - Prepare input file was called" << endl; |
| 139 | |
| 140 | if (fVerbosityLevel >=2) |
| 141 | cout << "\t* Changing lfdrtr = (" << (GLOBAL.lfdrtr?'T':'F') |
| 142 | << ") in fluka..." << endl; |
| 143 | GLOBAL.lfdrtr = true; |
| 144 | |
| 145 | if (fVerbosityLevel >=2) |
| 146 | cout << "\t* Opening file " << sInputFileName << endl; |
| 147 | const char* fname = sInputFileName; |
| 148 | fluka_openinp(lunin, PASSCHARA(fname)); |
| 149 | |
| 150 | if (fVerbosityLevel >=2) |
| 151 | cout << "\t* Calling flukam..." << endl; |
| 152 | flukam(1); |
| 153 | |
| 154 | if (fVerbosityLevel >=2) |
| 155 | cout << "\t* Closing file " << sInputFileName << endl; |
| 156 | fluka_closeinp(lunin); |
| 157 | |
| 158 | FinishGeometry(); |
| 159 | |
| 160 | if (fVerbosityLevel >=3) |
| 161 | cout << "<== TFluka::Init() called." << endl; |
| 162 | } |
| 163 | |
| 164 | //______________________________________________________________________________ |
| 165 | void TFluka::FinishGeometry() { |
| 166 | // |
| 167 | // Build-up table with region to medium correspondance |
| 168 | // |
| 169 | if (fVerbosityLevel >=3) |
| 170 | cout << "==> TFluka::FinishGeometry() called." << endl; |
| 171 | |
| 172 | printf("----FinishGeometry - nothing to do with TGeo\n"); |
| 173 | |
| 174 | if (fVerbosityLevel >=3) |
| 175 | cout << "<== TFluka::FinishGeometry() called." << endl; |
| 176 | } |
| 177 | |
| 178 | //______________________________________________________________________________ |
| 179 | void TFluka::BuildPhysics() { |
| 180 | if (fVerbosityLevel >=3) |
| 181 | cout << "==> TFluka::BuildPhysics() called." << endl; |
| 182 | |
| 183 | |
| 184 | if (fVerbosityLevel >=3) |
| 185 | cout << "<== TFluka::BuildPhysics() called." << endl; |
| 186 | } |
| 187 | |
| 188 | //______________________________________________________________________________ |
| 189 | void TFluka::ProcessEvent() { |
| 190 | if (fVerbosityLevel >=3) |
| 191 | cout << "==> TFluka::ProcessEvent() called." << endl; |
| 192 | fApplication->GeneratePrimaries(); |
| 193 | EPISOR.lsouit = true; |
| 194 | flukam(1); |
| 195 | if (fVerbosityLevel >=3) |
| 196 | cout << "<== TFluka::ProcessEvent() called." << endl; |
| 197 | } |
| 198 | |
| 199 | //______________________________________________________________________________ |
| 200 | void TFluka::ProcessRun(Int_t nevent) { |
| 201 | if (fVerbosityLevel >=3) |
| 202 | cout << "==> TFluka::ProcessRun(" << nevent << ") called." |
| 203 | << endl; |
| 204 | |
| 205 | if (fVerbosityLevel >=2) { |
| 206 | cout << "\t* GLOBAL.fdrtr = " << (GLOBAL.lfdrtr?'T':'F') << endl; |
| 207 | cout << "\t* Calling flukam again..." << endl; |
| 208 | } |
| 209 | fApplication->InitGeometry(); |
| 210 | fApplication->BeginEvent(); |
| 211 | ProcessEvent(); |
| 212 | fApplication->FinishEvent(); |
| 213 | if (fVerbosityLevel >=3) |
| 214 | cout << "<== TFluka::ProcessRun(" << nevent << ") called." |
| 215 | << endl; |
| 216 | |
| 217 | } |
| 218 | |
| 219 | //_____________________________________________________________________________ |
| 220 | // methods for building/management of geometry |
| 221 | |
| 222 | // functions from GCONS |
| 223 | //____________________________________________________________________________ |
| 224 | void TFluka::Gfmate(Int_t imat, char *name, Float_t &a, Float_t &z, |
| 225 | Float_t &dens, Float_t &radl, Float_t &absl, |
| 226 | Float_t* ubuf, Int_t& nbuf) { |
| 227 | // |
| 228 | fGeom->Gfmate(imat, name, a, z, dens, radl, absl, ubuf, nbuf); |
| 229 | } |
| 230 | |
| 231 | //______________________________________________________________________________ |
| 232 | void TFluka::Gfmate(Int_t imat, char *name, Double_t &a, Double_t &z, |
| 233 | Double_t &dens, Double_t &radl, Double_t &absl, |
| 234 | Double_t* ubuf, Int_t& nbuf) { |
| 235 | // |
| 236 | fGeom->Gfmate(imat, name, a, z, dens, radl, absl, ubuf, nbuf); |
| 237 | } |
| 238 | |
| 239 | // detector composition |
| 240 | //______________________________________________________________________________ |
| 241 | void TFluka::Material(Int_t& kmat, const char* name, Double_t a, |
| 242 | Double_t z, Double_t dens, Double_t radl, Double_t absl, |
| 243 | Float_t* buf, Int_t nwbuf) { |
| 244 | // |
| 245 | fGeom->Material(kmat, name, a, z, dens, radl, absl, buf, nwbuf); |
| 246 | } |
| 247 | |
| 248 | //______________________________________________________________________________ |
| 249 | void TFluka::Material(Int_t& kmat, const char* name, Double_t a, |
| 250 | Double_t z, Double_t dens, Double_t radl, Double_t absl, |
| 251 | Double_t* buf, Int_t nwbuf) { |
| 252 | // |
| 253 | fGeom->Material(kmat, name, a, z, dens, radl, absl, buf, nwbuf); |
| 254 | } |
| 255 | |
| 256 | //______________________________________________________________________________ |
| 257 | void TFluka::Mixture(Int_t& kmat, const char *name, Float_t *a, |
| 258 | Float_t *z, Double_t dens, Int_t nlmat, Float_t *wmat) { |
| 259 | // |
| 260 | fGeom->Mixture(kmat, name, a, z, dens, nlmat, wmat); |
| 261 | } |
| 262 | |
| 263 | //______________________________________________________________________________ |
| 264 | void TFluka::Mixture(Int_t& kmat, const char *name, Double_t *a, |
| 265 | Double_t *z, Double_t dens, Int_t nlmat, Double_t *wmat) { |
| 266 | // |
| 267 | fGeom->Mixture(kmat, name, a, z, dens, nlmat, wmat); |
| 268 | } |
| 269 | |
| 270 | //______________________________________________________________________________ |
| 271 | void TFluka::Medium(Int_t& kmed, const char *name, Int_t nmat, |
| 272 | Int_t isvol, Int_t ifield, Double_t fieldm, Double_t tmaxfd, |
| 273 | Double_t stemax, Double_t deemax, Double_t epsil, |
| 274 | Double_t stmin, Float_t* ubuf, Int_t nbuf) { |
| 275 | // |
| 276 | fGeom->Medium(kmed, name, nmat, isvol, ifield, fieldm, tmaxfd, stemax, deemax, |
| 277 | epsil, stmin, ubuf, nbuf); |
| 278 | } |
| 279 | |
| 280 | //______________________________________________________________________________ |
| 281 | void TFluka::Medium(Int_t& kmed, const char *name, Int_t nmat, |
| 282 | Int_t isvol, Int_t ifield, Double_t fieldm, Double_t tmaxfd, |
| 283 | Double_t stemax, Double_t deemax, Double_t epsil, |
| 284 | Double_t stmin, Double_t* ubuf, Int_t nbuf) { |
| 285 | // |
| 286 | fGeom->Medium(kmed, name, nmat, isvol, ifield, fieldm, tmaxfd, stemax, deemax, |
| 287 | epsil, stmin, ubuf, nbuf); |
| 288 | } |
| 289 | |
| 290 | //______________________________________________________________________________ |
| 291 | void TFluka::Matrix(Int_t& krot, Double_t thetaX, Double_t phiX, |
| 292 | Double_t thetaY, Double_t phiY, Double_t thetaZ, |
| 293 | Double_t phiZ) { |
| 294 | // |
| 295 | fGeom->Matrix(krot, thetaX, phiX, thetaY, phiY, thetaZ, phiZ); |
| 296 | } |
| 297 | |
| 298 | //______________________________________________________________________________ |
| 299 | void TFluka::Gstpar(Int_t /*itmed*/, const char */*param*/, Double_t /*parval*/) { |
| 300 | // |
| 301 | // Is it needed with TGeo ??? - to clear-up |
| 302 | Warning("Gstpar", "Not implemented with TGeo"); |
| 303 | } |
| 304 | |
| 305 | // functions from GGEOM |
| 306 | //_____________________________________________________________________________ |
| 307 | void TFluka::Gsatt(const char *name, const char *att, Int_t val) |
| 308 | { |
| 309 | fGeom->Gsatt(name,att, val); |
| 310 | } |
| 311 | |
| 312 | //______________________________________________________________________________ |
| 313 | Int_t TFluka::Gsvolu(const char *name, const char *shape, Int_t nmed, |
| 314 | Float_t *upar, Int_t np) { |
| 315 | // |
| 316 | return fGeom->Gsvolu(name, shape, nmed, upar, np); |
| 317 | } |
| 318 | |
| 319 | //______________________________________________________________________________ |
| 320 | Int_t TFluka::Gsvolu(const char *name, const char *shape, Int_t nmed, |
| 321 | Double_t *upar, Int_t np) { |
| 322 | // |
| 323 | return fGeom->Gsvolu(name, shape, nmed, upar, np); |
| 324 | } |
| 325 | |
| 326 | //______________________________________________________________________________ |
| 327 | void TFluka::Gsdvn(const char *name, const char *mother, Int_t ndiv, |
| 328 | Int_t iaxis) { |
| 329 | // |
| 330 | fGeom->Gsdvn(name, mother, ndiv, iaxis); |
| 331 | } |
| 332 | |
| 333 | //______________________________________________________________________________ |
| 334 | void TFluka::Gsdvn2(const char *name, const char *mother, Int_t ndiv, |
| 335 | Int_t iaxis, Double_t c0i, Int_t numed) { |
| 336 | // |
| 337 | fGeom->Gsdvn2(name, mother, ndiv, iaxis, c0i, numed); |
| 338 | } |
| 339 | |
| 340 | //______________________________________________________________________________ |
| 341 | void TFluka::Gsdvt(const char *name, const char *mother, Double_t step, |
| 342 | Int_t iaxis, Int_t numed, Int_t ndvmx) { |
| 343 | // |
| 344 | fGeom->Gsdvt(name, mother, step, iaxis, numed, ndvmx); |
| 345 | } |
| 346 | |
| 347 | //______________________________________________________________________________ |
| 348 | void TFluka::Gsdvt2(const char *name, const char *mother, Double_t step, |
| 349 | Int_t iaxis, Double_t c0, Int_t numed, Int_t ndvmx) { |
| 350 | // |
| 351 | fGeom->Gsdvt2(name, mother, step, iaxis, c0, numed, ndvmx); |
| 352 | } |
| 353 | |
| 354 | //______________________________________________________________________________ |
| 355 | void TFluka::Gsord(const char * /*name*/, Int_t /*iax*/) { |
| 356 | // |
| 357 | // Nothing to do with TGeo |
| 358 | } |
| 359 | |
| 360 | //______________________________________________________________________________ |
| 361 | void TFluka::Gspos(const char *name, Int_t nr, const char *mother, |
| 362 | Double_t x, Double_t y, Double_t z, Int_t irot, |
| 363 | const char *konly) { |
| 364 | // |
| 365 | fGeom->Gspos(name, nr, mother, x, y, z, irot, konly); |
| 366 | } |
| 367 | |
| 368 | //______________________________________________________________________________ |
| 369 | void TFluka::Gsposp(const char *name, Int_t nr, const char *mother, |
| 370 | Double_t x, Double_t y, Double_t z, Int_t irot, |
| 371 | const char *konly, Float_t *upar, Int_t np) { |
| 372 | // |
| 373 | fGeom->Gsposp(name, nr, mother, x, y, z, irot, konly, upar, np); |
| 374 | } |
| 375 | |
| 376 | //______________________________________________________________________________ |
| 377 | void TFluka::Gsposp(const char *name, Int_t nr, const char *mother, |
| 378 | Double_t x, Double_t y, Double_t z, Int_t irot, |
| 379 | const char *konly, Double_t *upar, Int_t np) { |
| 380 | // |
| 381 | fGeom->Gsposp(name, nr, mother, x, y, z, irot, konly, upar, np); |
| 382 | } |
| 383 | |
| 384 | //______________________________________________________________________________ |
| 385 | void TFluka::Gsbool(const char* /*onlyVolName*/, const char* /*manyVolName*/) { |
| 386 | // |
| 387 | // Nothing to do with TGeo |
| 388 | Warning("Gsbool", "Not implemented with TGeo"); |
| 389 | } |
| 390 | |
| 391 | //______________________________________________________________________________ |
| 392 | void TFluka::SetCerenkov(Int_t /*itmed*/, Int_t /*npckov*/, Float_t */*ppckov*/, |
| 393 | Float_t * /*absco*/, Float_t * /*effic*/, Float_t * /*rindex*/) { |
| 394 | // |
| 395 | // Not implemented with TGeo - what G4 did ? Any FLUKA card generated? |
| 396 | Warning("SetCerenkov", "Not implemented with TGeo"); |
| 397 | } |
| 398 | |
| 399 | //______________________________________________________________________________ |
| 400 | void TFluka::SetCerenkov(Int_t /*itmed*/, Int_t /*npckov*/, Double_t * /*ppckov*/, |
| 401 | Double_t * /*absco*/, Double_t * /*effic*/, Double_t * /*rindex*/) { |
| 402 | // |
| 403 | // Not implemented with TGeo - what G4 did ? Any FLUKA card generated? |
| 404 | Warning("SetCerenkov", "Not implemented with TGeo"); |
| 405 | } |
| 406 | |
| 407 | // Euclid |
| 408 | //______________________________________________________________________________ |
| 409 | void TFluka::WriteEuclid(const char* /*fileName*/, const char* /*topVol*/, |
| 410 | Int_t /*number*/, Int_t /*nlevel*/) { |
| 411 | // |
| 412 | // Not with TGeo |
| 413 | Warning("WriteEuclid", "Not implemented with TGeo"); |
| 414 | } |
| 415 | |
| 416 | |
| 417 | |
| 418 | //_____________________________________________________________________________ |
| 419 | // methods needed by the stepping |
| 420 | //____________________________________________________________________________ |
| 421 | |
| 422 | Int_t TFluka::GetMedium() const { |
| 423 | // |
| 424 | // Get the medium number for the current fluka region |
| 425 | // |
| 426 | return fGeom->GetMedium(); // this I need to check due to remapping !!! |
| 427 | } |
| 428 | |
| 429 | |
| 430 | |
| 431 | //____________________________________________________________________________ |
| 432 | // particle table usage |
| 433 | // ID <--> PDG transformations |
| 434 | //_____________________________________________________________________________ |
| 435 | Int_t TFluka::IdFromPDG(Int_t pdg) const |
| 436 | { |
| 437 | // |
| 438 | // Return Fluka code from PDG and pseudo ENDF code |
| 439 | |
| 440 | // Catch the feedback photons |
| 441 | if (pdg == 50000051) return (-1); |
| 442 | // MCIHAD() goes from pdg to fluka internal. |
| 443 | Int_t intfluka = mcihad(pdg); |
| 444 | // KPTOIP array goes from internal to official |
| 445 | return GetFlukaKPTOIP(intfluka); |
| 446 | } |
| 447 | |
| 448 | //______________________________________________________________________________ |
| 449 | Int_t TFluka::PDGFromId(Int_t id) const |
| 450 | { |
| 451 | // |
| 452 | // Return PDG code and pseudo ENDF code from Fluka code |
| 453 | |
| 454 | // IPTOKP array goes from official to internal |
| 455 | |
| 456 | if (id == -1) { |
| 457 | // Cerenkov photon |
| 458 | if (fVerbosityLevel >= 1) |
| 459 | printf("\n PDGFromId: Cerenkov Photon \n"); |
| 460 | return 50000050; |
| 461 | } |
| 462 | // Error id |
| 463 | if (id == 0) { |
| 464 | if (fVerbosityLevel >= 1) |
| 465 | printf("PDGFromId: Error id = 0\n"); |
| 466 | return -1; |
| 467 | } |
| 468 | // Good id |
| 469 | Int_t intfluka = GetFlukaIPTOKP(id); |
| 470 | if (intfluka == 0) { |
| 471 | if (fVerbosityLevel >= 1) |
| 472 | printf("PDGFromId: Error intfluka = 0: %d\n", id); |
| 473 | return -1; |
| 474 | } else if (intfluka < 0) { |
| 475 | if (fVerbosityLevel >= 1) |
| 476 | printf("PDGFromId: Error intfluka < 0: %d\n", id); |
| 477 | return -1; |
| 478 | } |
| 479 | if (fVerbosityLevel >= 3) |
| 480 | printf("mpdgha called with %d %d \n", id, intfluka); |
| 481 | // MPDGHA() goes from fluka internal to pdg. |
| 482 | return mpdgha(intfluka); |
| 483 | } |
| 484 | |
| 485 | //_____________________________________________________________________________ |
| 486 | // methods for physics management |
| 487 | //____________________________________________________________________________ |
| 488 | // |
| 489 | // set methods |
| 490 | // |
| 491 | |
| 492 | //______________________________________________________________________________ |
| 493 | void TFluka::SetProcess(const char* flagName, Int_t flagValue) |
| 494 | { |
| 495 | Int_t i; |
| 496 | if (iNbOfProc < 100) { |
| 497 | for (i=0; i<iNbOfProc; i++) { |
| 498 | if (strcmp(&sProcessFlag[i][0],flagName) == 0) { |
| 499 | iProcessValue[iNbOfProc] = flagValue; |
| 500 | goto fin; |
| 501 | } |
| 502 | } |
| 503 | strcpy(&sProcessFlag[iNbOfProc][0],flagName); |
| 504 | iProcessValue[iNbOfProc++] = flagValue; |
| 505 | } |
| 506 | else |
| 507 | cout << "Nb of SetProcess calls exceeds 100 - ignored" << endl; |
| 508 | fin: |
| 509 | iNbOfProc = iNbOfProc; |
| 510 | } |
| 511 | |
| 512 | //______________________________________________________________________________ |
| 513 | void TFluka::SetCut(const char* cutName, Double_t cutValue) |
| 514 | { |
| 515 | Int_t i; |
| 516 | if (iNbOfCut < 100) { |
| 517 | for (i=0; i<iNbOfCut; i++) { |
| 518 | if (strcmp(&sCutFlag[i][0],cutName) == 0) { |
| 519 | fCutValue[iNbOfCut] = cutValue; |
| 520 | goto fin; |
| 521 | } |
| 522 | } |
| 523 | strcpy(&sCutFlag[iNbOfCut][0],cutName); |
| 524 | fCutValue[iNbOfCut++] = cutValue; |
| 525 | } |
| 526 | else |
| 527 | cout << "Nb of SetCut calls exceeds 100 - ignored" << endl; |
| 528 | fin: |
| 529 | iNbOfCut = iNbOfCut; |
| 530 | } |
| 531 | |
| 532 | //______________________________________________________________________________ |
| 533 | Double_t TFluka::Xsec(char*, Double_t, Int_t, Int_t) |
| 534 | { |
| 535 | printf("WARNING: Xsec not yet implemented !\n"); return -1.; |
| 536 | } |
| 537 | |
| 538 | |
| 539 | //______________________________________________________________________________ |
| 540 | void TFluka::InitPhysics() |
| 541 | { |
| 542 | // Last material number taken from the "corealice.inp" file, presently 31 |
| 543 | // !!! it should be available from Flugg !!! |
| 544 | Int_t i, j, k; |
| 545 | Double_t fCut; |
| 65398acc |
546 | Float_t fLastMaterial = fGeom->GetLastMaterialIndex(); |
| 547 | printf(" last FLUKA material is %g\n", fLastMaterial); |
| 0c160c74 |
548 | |
| 8495a208 |
549 | // construct file names |
| 0c160c74 |
550 | TString sAliceCoreInp = getenv("ALICE_ROOT"); |
| 551 | sAliceCoreInp +="/TFluka/input/"; |
| 552 | TString sAliceTmp = "flukaMat.inp"; |
| 553 | TString sAliceInp = GetInputFileName(); |
| 8495a208 |
554 | sAliceCoreInp += GetCoreInputFileName(); |
| 555 | ifstream AliceCoreInp(sAliceCoreInp.Data()); |
| 556 | ifstream AliceFlukaMat(sAliceTmp.Data()); |
| 557 | ofstream AliceInp(sAliceInp.Data()); |
| 558 | |
| 559 | // copy core input file |
| 560 | Char_t sLine[255]; |
| 561 | Float_t fEventsPerRun; |
| 562 | |
| 563 | while (AliceCoreInp.getline(sLine,255)) { |
| 564 | if (strncmp(sLine,"GEOEND",6) != 0) |
| 565 | AliceInp << sLine << endl; // copy until GEOEND card |
| 566 | else { |
| 567 | AliceInp << "GEOEND" << endl; // add GEOEND card |
| 568 | goto flukamat; |
| 569 | } |
| 570 | } // end of while until GEOEND card |
| 571 | |
| 572 | flukamat: |
| 573 | while (AliceFlukaMat.getline(sLine,255)) { // copy flukaMat.inp file |
| 574 | AliceInp << sLine << endl; |
| 575 | } |
| 576 | |
| 577 | while (AliceCoreInp.getline(sLine,255)) { |
| 578 | if (strncmp(sLine,"START",5) != 0) |
| 579 | AliceInp << sLine << endl; |
| 580 | else { |
| 581 | sscanf(sLine+10,"%10f",&fEventsPerRun); |
| 582 | goto fin; |
| 583 | } |
| 584 | } //end of while until START card |
| 585 | |
| 586 | fin: |
| 587 | // in G3 the process control values meaning can be different for |
| 588 | // different processes, but for most of them is: |
| 589 | // 0 process is not activated |
| 590 | // 1 process is activated WITH generation of secondaries |
| 591 | // 2 process is activated WITHOUT generation of secondaries |
| 592 | // if process does not generate secondaries => 1 same as 2 |
| 593 | // |
| 594 | // Exceptions: |
| 595 | // MULS: also 3 |
| 596 | // LOSS: also 3, 4 |
| 597 | // RAYL: only 0,1 |
| 598 | // HADR: may be > 2 |
| 599 | // |
| 600 | |
| 601 | // Loop over number of SetProcess calls |
| 602 | AliceInp << "*----------------------------------------------------------------------------- "; |
| 603 | AliceInp << endl; |
| 604 | AliceInp << "*----- The following data are generated from SetProcess and SetCut calls ----- "; |
| 605 | AliceInp << endl; |
| 606 | AliceInp << "*----------------------------------------------------------------------------- "; |
| 607 | AliceInp << endl; |
| 608 | for (i=0; i<iNbOfProc; i++) { |
| 609 | |
| 610 | // annihilation |
| 611 | // G3 default value: 1 |
| 612 | // G4 processes: G4eplusAnnihilation/G4IeplusAnnihilation |
| 613 | // Particles: e+ |
| 614 | // Physics: EM |
| 615 | // flag = 0 no annihilation |
| 616 | // flag = 1 annihilation, decays processed |
| 617 | // flag = 2 annihilation, no decay product stored |
| 618 | // gMC ->SetProcess("ANNI",1); // EMFCUT -1. 0. 0. 3. lastmat 0. ANNH-THR |
| 619 | if (strncmp(&sProcessFlag[i][0],"ANNI",4) == 0) { |
| 620 | if (iProcessValue[i] == 1 || iProcessValue[i] == 2) { |
| 621 | AliceInp << "*"; |
| 622 | AliceInp << endl; |
| 623 | AliceInp << "*Kinetic energy threshold (GeV) for e+ annihilation - resets to default=0."; |
| 624 | AliceInp << endl; |
| 625 | AliceInp << "*Generated from call: SetProcess('ANNI',1) or SetProcess('ANNI',2)"; |
| 626 | AliceInp << endl; |
| 627 | AliceInp << setw(10) << "EMFCUT "; |
| 628 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 629 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 630 | AliceInp << setw(10) << -1.0; // kinetic energy threshold (GeV) for e+ annihilation (resets to default=0) |
| 631 | AliceInp << setw(10) << 0.0; // not used |
| 632 | AliceInp << setw(10) << 0.0; // not used |
| 633 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 634 | AliceInp << setw(10) << setprecision(2); |
| 635 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 636 | AliceInp << setprecision(1); |
| 637 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 638 | AliceInp << setw(8) << "ANNH-THR"; |
| 639 | AliceInp << endl; |
| 640 | } |
| 641 | else if (iProcessValue[i] == 0) { |
| 642 | AliceInp << "*"; |
| 643 | AliceInp << endl; |
| 644 | AliceInp << "*No annihilation - no FLUKA card generated"; |
| 645 | AliceInp << endl; |
| 646 | AliceInp << "*Generated from call: SetProcess('ANNI',0)"; |
| 647 | AliceInp << endl; |
| 648 | } |
| 649 | else { |
| 650 | AliceInp << "*"; |
| 651 | AliceInp << endl; |
| 652 | AliceInp << "*Illegal flag value in SetProcess('ANNI',?) call."; |
| 653 | AliceInp << endl; |
| 654 | AliceInp << "*No FLUKA card generated"; |
| 655 | AliceInp << endl; |
| 656 | } |
| 657 | } |
| 658 | |
| 659 | // bremsstrahlung and pair production are both activated |
| 660 | // G3 default value: 1 |
| 661 | // G4 processes: G4eBremsstrahlung/G4IeBremsstrahlung, |
| 662 | // G4MuBremsstrahlung/G4IMuBremsstrahlung, |
| 663 | // G4LowEnergyBremstrahlung |
| 664 | // Particles: e-/e+; mu+/mu- |
| 665 | // Physics: EM |
| 666 | // flag = 0 no bremsstrahlung |
| 667 | // flag = 1 bremsstrahlung, photon processed |
| 668 | // flag = 2 bremsstrahlung, no photon stored |
| 669 | // gMC ->SetProcess("BREM",1); // PAIRBREM 2. 0. 0. 3. lastmat |
| 670 | // EMFCUT -1. 0. 0. 3. lastmat 0. ELPO-THR |
| 671 | // G3 default value: 1 |
| 672 | // G4 processes: G4GammaConversion, |
| 673 | // G4MuPairProduction/G4IMuPairProduction |
| 674 | // G4LowEnergyGammaConversion |
| 675 | // Particles: gamma, mu |
| 676 | // Physics: EM |
| 677 | // flag = 0 no delta rays |
| 678 | // flag = 1 delta rays, secondaries processed |
| 679 | // flag = 2 delta rays, no secondaries stored |
| 680 | // gMC ->SetProcess("PAIR",1); // PAIRBREM 1. 0. 0. 3. lastmat |
| 681 | // EMFCUT 0. 0. -1. 3. lastmat 0. PHOT-THR |
| 682 | else if ((strncmp(&sProcessFlag[i][0],"PAIR",4) == 0) && (iProcessValue[i] == 1 || iProcessValue[i] == 2)) { |
| 683 | for (j=0; j<iNbOfProc; j++) { |
| 684 | if ((strncmp(&sProcessFlag[j][0],"BREM",4) == 0) && (iProcessValue[j] == 1 || iProcessValue[j] == 2)) { |
| 685 | AliceInp << "*"; |
| 686 | AliceInp << endl; |
| 687 | AliceInp << "*Bremsstrahlung and pair production by muons and charged hadrons both activated"; |
| 688 | AliceInp << endl; |
| 689 | AliceInp << "*Generated from call: SetProcess('BREM',1) and SetProcess('PAIR',1)"; |
| 690 | AliceInp << endl; |
| 691 | AliceInp << "*Energy threshold set by call SetCut('BCUTM',cut) or set to 0."; |
| 692 | AliceInp << endl; |
| 693 | AliceInp << "*Energy threshold set by call SetCut('PPCUTM',cut) or set to 0."; |
| 694 | AliceInp << endl; |
| 695 | AliceInp << setw(10) << "PAIRBREM "; |
| 696 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 697 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 698 | AliceInp << setw(10) << 3.0; // bremsstrahlung and pair production by muons and charged hadrons both are activated |
| 699 | // direct pair production by muons |
| 700 | // G4 particles: "e-", "e+" |
| 701 | // G3 default value: 0.01 GeV |
| 702 | //gMC ->SetCut("PPCUTM",cut); // total energy cut for direct pair prod. by muons |
| 703 | fCut = 0.0; |
| 704 | for (k=0; k<iNbOfCut; k++) { |
| 705 | if (strncmp(&sCutFlag[k][0],"PPCUTM",6) == 0) fCut = fCutValue[k]; |
| 706 | } |
| 707 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 708 | AliceInp << setw(10) << fCut; // e+, e- kinetic energy threshold (in GeV) for explicit pair production. |
| 709 | // muon and hadron bremsstrahlung |
| 710 | // G4 particles: "gamma" |
| 711 | // G3 default value: CUTGAM=0.001 GeV |
| 712 | //gMC ->SetCut("BCUTM",cut); // cut for muon and hadron bremsstrahlung |
| 713 | fCut = 0.0; |
| 714 | for (k=0; k<iNbOfCut; k++) { |
| 715 | if (strncmp(&sCutFlag[k][0],"BCUTM",5) == 0) fCut = fCutValue[k]; |
| 716 | } |
| 717 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 718 | AliceInp << setw(10) << fCut; // photon energy threshold (GeV) for explicit bremsstrahlung production |
| 719 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 720 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 721 | AliceInp << setw(10) << setprecision(2); |
| 722 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 723 | AliceInp << endl; |
| 724 | |
| 725 | // for e+ and e- |
| 726 | AliceInp << "*"; |
| 727 | AliceInp << endl; |
| 728 | AliceInp << "*Kinetic energy threshold (GeV) for e+/e- bremsstrahlung - resets to default=0."; |
| 729 | AliceInp << endl; |
| 730 | AliceInp << "*Generated from call: SetProcess('BREM',1);"; |
| 731 | AliceInp << endl; |
| 732 | AliceInp << setw(10) << "EMFCUT "; |
| 733 | fCut = -1.0; |
| 734 | for (k=0; k<iNbOfCut; k++) { |
| 735 | if (strncmp(&sCutFlag[k][0],"BCUTE",5) == 0) fCut = fCutValue[k]; |
| 736 | } |
| 737 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 738 | AliceInp << setw(10) << fCut; // kinetic energy threshold (GeV) for e+/e- bremsstrahlung (resets to default=0) |
| 739 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 740 | AliceInp << setw(10) << 0.0; // not used |
| 741 | AliceInp << setw(10) << 0.0; // not used |
| 742 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 743 | AliceInp << setw(10) << setprecision(2); |
| 744 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 745 | AliceInp << setprecision(1); |
| 746 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 747 | AliceInp << setw(8) << "ELPO-THR"; |
| 748 | AliceInp << endl; |
| 749 | |
| 750 | // for e+ and e- |
| 751 | AliceInp << "*"; |
| 752 | AliceInp << endl; |
| 753 | AliceInp << "*Pair production by electrons is activated"; |
| 754 | AliceInp << endl; |
| 755 | AliceInp << "*Generated from call: SetProcess('PAIR',1);"; |
| 756 | AliceInp << endl; |
| 757 | AliceInp << setw(10) << "EMFCUT "; |
| 758 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 759 | AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Compton scattering (= 0.0 : ignored) |
| 760 | AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Photoelectric (= 0.0 : ignored) |
| 761 | fCut = -1.0; |
| 762 | for (j=0; j<iNbOfCut; j++) { |
| 763 | if (strncmp(&sCutFlag[j][0],"CUTGAM",6) == 0) fCut = fCutValue[j]; |
| 764 | } |
| 765 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 766 | AliceInp << setw(10) << fCut; // energy threshold (GeV) for gamma pair production (< 0.0 : resets to default, = 0.0 : ignored) |
| 767 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 768 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 769 | AliceInp << setprecision(2); |
| 770 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 771 | AliceInp << setprecision(1); |
| 772 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 773 | AliceInp << setw(8) << "PHOT-THR"; |
| 774 | AliceInp << endl; |
| 775 | goto BOTH; |
| 776 | } // end of if for BREM |
| 777 | } // end of loop for BREM |
| 778 | |
| 779 | // only pair production by muons and charged hadrons is activated |
| 780 | AliceInp << "*"; |
| 781 | AliceInp << endl; |
| 782 | AliceInp << "*Pair production by muons and charged hadrons is activated"; |
| 783 | AliceInp << endl; |
| 784 | AliceInp << "*Generated from call: SetProcess('PAIR',1) or SetProcess('PAIR',2)"; |
| 785 | AliceInp << endl; |
| 786 | AliceInp << "*Energy threshold set by call SetCut('PPCUTM',cut) or set to 0."; |
| 787 | AliceInp << endl; |
| 788 | AliceInp << setw(10) << "PAIRBREM "; |
| 789 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 790 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 791 | AliceInp << setw(10) << 1.0; // pair production by muons and charged hadrons is activated |
| 792 | // direct pair production by muons |
| 793 | // G4 particles: "e-", "e+" |
| 794 | // G3 default value: 0.01 GeV |
| 795 | //gMC ->SetCut("PPCUTM",cut); // total energy cut for direct pair prod. by muons |
| 796 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 797 | AliceInp << setw(10) << 0.0; // e+, e- kinetic energy threshold (in GeV) for explicit pair production. |
| 798 | AliceInp << setw(10) << 0.0; // no explicit bremsstrahlung production is simulated |
| 799 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 800 | AliceInp << setprecision(2); |
| 801 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 802 | AliceInp << endl; |
| 803 | |
| 804 | // for e+ and e- |
| 805 | AliceInp << "*"; |
| 806 | AliceInp << endl; |
| 807 | AliceInp << "*Pair production by electrons is activated"; |
| 808 | AliceInp << endl; |
| 809 | AliceInp << "*Generated from call: SetProcess('PAIR',1) or SetProcess('PAIR',2)"; |
| 810 | AliceInp << endl; |
| 811 | AliceInp << setw(10) << "EMFCUT "; |
| 812 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 813 | AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Compton scattering (= 0.0 : ignored) |
| 814 | AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Photoelectric (= 0.0 : ignored) |
| 815 | |
| 816 | fCut = -1.0; |
| 817 | for (j=0; j<iNbOfCut; j++) { |
| 818 | if (strncmp(&sCutFlag[j][0],"CUTGAM",6) == 0) fCut = fCutValue[j]; |
| 819 | } |
| 820 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 821 | AliceInp << setw(10) << fCut; // energy threshold (GeV) for gamma pair production (< 0.0 : resets to default, = 0.0 : ignored) |
| 822 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 823 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 824 | AliceInp << setprecision(2); |
| 825 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 826 | AliceInp << setprecision(1); |
| 827 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 828 | AliceInp << setw(8) << "PHOT-THR"; |
| 829 | AliceInp << endl; |
| 830 | |
| 831 | BOTH: |
| 832 | k = 0; |
| 833 | } // end of if for PAIR |
| 834 | |
| 835 | |
| 836 | |
| 837 | // bremsstrahlung |
| 838 | // G3 default value: 1 |
| 839 | // G4 processes: G4eBremsstrahlung/G4IeBremsstrahlung, |
| 840 | // G4MuBremsstrahlung/G4IMuBremsstrahlung, |
| 841 | // G4LowEnergyBremstrahlung |
| 842 | // Particles: e-/e+; mu+/mu- |
| 843 | // Physics: EM |
| 844 | // flag = 0 no bremsstrahlung |
| 845 | // flag = 1 bremsstrahlung, photon processed |
| 846 | // flag = 2 bremsstrahlung, no photon stored |
| 847 | // gMC ->SetProcess("BREM",1); // PAIRBREM 2. 0. 0. 3. lastmat |
| 848 | // EMFCUT -1. 0. 0. 3. lastmat 0. ELPO-THR |
| 849 | else if (strncmp(&sProcessFlag[i][0],"BREM",4) == 0) { |
| 850 | for (j=0; j<iNbOfProc; j++) { |
| 851 | if ((strncmp(&sProcessFlag[j][0],"PAIR",4) == 0) && iProcessValue[j] == 1) goto NOBREM; |
| 852 | } |
| 853 | if (iProcessValue[i] == 1 || iProcessValue[i] == 2) { |
| 854 | AliceInp << "*"; |
| 855 | AliceInp << endl; |
| 856 | AliceInp << "*Bremsstrahlung by muons and charged hadrons is activated"; |
| 857 | AliceInp << endl; |
| 858 | AliceInp << "*Generated from call: SetProcess('BREM',1) or SetProcess('BREM',2)"; |
| 859 | AliceInp << endl; |
| 860 | AliceInp << "*Energy threshold set by call SetCut('BCUTM',cut) or set to 0."; |
| 861 | AliceInp << endl; |
| 862 | AliceInp << setw(10) << "PAIRBREM "; |
| 863 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 864 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 865 | AliceInp << setw(10) << 2.0; // bremsstrahlung by muons and charged hadrons is activated |
| 866 | AliceInp << setw(10) << 0.0; // no meaning |
| 867 | // muon and hadron bremsstrahlung |
| 868 | // G4 particles: "gamma" |
| 869 | // G3 default value: CUTGAM=0.001 GeV |
| 870 | //gMC ->SetCut("BCUTM",cut); // cut for muon and hadron bremsstrahlung |
| 871 | fCut = 0.0; |
| 872 | for (j=0; j<iNbOfCut; j++) { |
| 873 | if (strncmp(&sCutFlag[j][0],"BCUTM",5) == 0) fCut = fCutValue[j]; |
| 874 | } |
| 875 | AliceInp << setw(10) << fCut; // photon energy threshold (GeV) for explicit bremsstrahlung production |
| 876 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 877 | AliceInp << setw(10) << setprecision(2); |
| 878 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 879 | AliceInp << endl; |
| 880 | |
| 881 | // for e+ and e- |
| 882 | AliceInp << "*"; |
| 883 | AliceInp << endl; |
| 884 | AliceInp << "*Kinetic energy threshold (GeV) for e+/e- bremsstrahlung - resets to default=0."; |
| 885 | AliceInp << endl; |
| 886 | AliceInp << "*Generated from call: SetProcess('BREM',1);"; |
| 887 | AliceInp << endl; |
| 888 | AliceInp << setw(10) << "EMFCUT "; |
| 889 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 890 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 891 | AliceInp << setw(10) << -1.0; // kinetic energy threshold (GeV) for e+/e- bremsstrahlung (resets to default=0) |
| 892 | AliceInp << setw(10) << 0.0; // not used |
| 893 | AliceInp << setw(10) << 0.0; // not used |
| 894 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 895 | AliceInp << setw(10) << setprecision(2); |
| 896 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 897 | AliceInp << setprecision(1); |
| 898 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 899 | AliceInp << setw(8) << "ELPO-THR"; |
| 900 | AliceInp << endl; |
| 901 | } |
| 902 | else if (iProcessValue[i] == 0) { |
| 903 | AliceInp << "*"; |
| 904 | AliceInp << endl; |
| 905 | AliceInp << "*No bremsstrahlung - no FLUKA card generated"; |
| 906 | AliceInp << endl; |
| 907 | AliceInp << "*Generated from call: SetProcess('BREM',0)"; |
| 908 | AliceInp << endl; |
| 909 | } |
| 910 | else { |
| 911 | AliceInp << "*"; |
| 912 | AliceInp << endl; |
| 913 | AliceInp << "*Illegal flag value in SetProcess('BREM',?) call."; |
| 914 | AliceInp << endl; |
| 915 | AliceInp << "*No FLUKA card generated"; |
| 916 | AliceInp << endl; |
| 917 | } |
| 918 | NOBREM: |
| 919 | j = 0; |
| 920 | } // end of else if (strncmp(&sProcessFlag[i][0],"BREM",4) == 0) |
| 921 | |
| 922 | |
| 923 | // Cerenkov photon generation |
| 924 | // G3 default value: 0 |
| 925 | // G4 process: G4Cerenkov |
| 926 | // |
| 927 | // Particles: charged |
| 928 | // Physics: Optical |
| 929 | // flag = 0 no Cerenkov photon generation |
| 930 | // flag = 1 Cerenkov photon generation |
| 931 | // flag = 2 Cerenkov photon generation with primary stopped at each step |
| 932 | //xx gMC ->SetProcess("CKOV",1); // ??? Cerenkov photon generation |
| 933 | else if (strncmp(&sProcessFlag[i][0],"CKOV",4) == 0) { |
| 934 | if (iProcessValue[i] == 1 || iProcessValue[i] == 2) { |
| 935 | AliceInp << "*"; |
| 936 | AliceInp << endl; |
| 937 | AliceInp << "*Cerenkov photon generation"; |
| 938 | AliceInp << endl; |
| 939 | AliceInp << "*Generated from call: SetProcess('CKOV',1) or SetProcess('CKOV',2)"; |
| 940 | AliceInp << endl; |
| 941 | AliceInp << setw(10) << "OPT-PROD "; |
| 942 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 943 | AliceInp << setw(10) << 2.07e-9 ; // minimum Cerenkov photon emission energy (in GeV!). Default: 2.07E-9 GeV (corresponding to 600 nm) |
| 944 | AliceInp << setw(10) << 4.96e-9; // maximum Cerenkov photon emission energy (in GeV!). Default: 4.96E-9 GeV (corresponding to 250 nm) |
| 945 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 946 | AliceInp << setw(10) << 0.0; // not used |
| 947 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 948 | AliceInp << setprecision(2); |
| 949 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 950 | AliceInp << setprecision(1); |
| 951 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 952 | AliceInp << setw(8) << "CERENKOV"; |
| 953 | AliceInp << endl; |
| 954 | } |
| 955 | else if (iProcessValue[i] == 0) { |
| 956 | AliceInp << "*"; |
| 957 | AliceInp << endl; |
| 958 | AliceInp << "*No Cerenkov photon generation"; |
| 959 | AliceInp << endl; |
| 960 | AliceInp << "*Generated from call: SetProcess('CKOV',0)"; |
| 961 | AliceInp << endl; |
| 962 | AliceInp << setw(10) << "OPT-PROD "; |
| 963 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 964 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 965 | AliceInp << setw(10) << 0.0; // not used |
| 966 | AliceInp << setw(10) << 0.0; // not used |
| 967 | AliceInp << setw(10) << 0.0; // not used |
| 968 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 969 | AliceInp << setprecision(2); |
| 970 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 971 | AliceInp << setprecision(1); |
| 972 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 973 | AliceInp << setw(8) << "CERE-OFF"; |
| 974 | AliceInp << endl; |
| 975 | } |
| 976 | else { |
| 977 | AliceInp << "*"; |
| 978 | AliceInp << endl; |
| 979 | AliceInp << "*Illegal flag value in SetProcess('CKOV',?) call."; |
| 980 | AliceInp << endl; |
| 981 | AliceInp << "*No FLUKA card generated"; |
| 982 | AliceInp << endl; |
| 983 | } |
| 984 | } // end of else if (strncmp(&sProcessFlag[i][0],"CKOV",4) == 0) |
| 985 | |
| 986 | |
| 987 | // Compton scattering |
| 988 | // G3 default value: 1 |
| 989 | // G4 processes: G4ComptonScattering, |
| 990 | // G4LowEnergyCompton, |
| 991 | // G4PolarizedComptonScattering |
| 992 | // Particles: gamma |
| 993 | // Physics: EM |
| 994 | // flag = 0 no Compton scattering |
| 995 | // flag = 1 Compton scattering, electron processed |
| 996 | // flag = 2 Compton scattering, no electron stored |
| 997 | // gMC ->SetProcess("COMP",1); // EMFCUT -1. 0. 0. 3. lastmat 0. PHOT-THR |
| 998 | else if (strncmp(&sProcessFlag[i][0],"COMP",4) == 0) { |
| 999 | if (iProcessValue[i] == 1 || iProcessValue[i] == 2) { |
| 1000 | AliceInp << "*"; |
| 1001 | AliceInp << endl; |
| 1002 | AliceInp << "*Energy threshold (GeV) for Compton scattering - resets to default=0."; |
| 1003 | AliceInp << endl; |
| 1004 | AliceInp << "*Generated from call: SetProcess('COMP',1);"; |
| 1005 | AliceInp << endl; |
| 1006 | AliceInp << setw(10) << "EMFCUT "; |
| 1007 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1008 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1009 | AliceInp << setw(10) << -1.0; // energy threshold (GeV) for Compton scattering - resets to default=0. |
| 1010 | AliceInp << setw(10) << 0.0; // not used |
| 1011 | AliceInp << setw(10) << 0.0; // not used |
| 1012 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1013 | AliceInp << setprecision(2); |
| 1014 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1015 | AliceInp << setprecision(1); |
| 1016 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 1017 | AliceInp << setw(8) << "PHOT-THR"; |
| 1018 | AliceInp << endl; |
| 1019 | } |
| 1020 | else if (iProcessValue[i] == 0) { |
| 1021 | AliceInp << "*"; |
| 1022 | AliceInp << endl; |
| 1023 | AliceInp << "*No Compton scattering - no FLUKA card generated"; |
| 1024 | AliceInp << endl; |
| 1025 | AliceInp << "*Generated from call: SetProcess('COMP',0)"; |
| 1026 | AliceInp << endl; |
| 1027 | } |
| 1028 | else { |
| 1029 | AliceInp << "*"; |
| 1030 | AliceInp << endl; |
| 1031 | AliceInp << "*Illegal flag value in SetProcess('COMP',?) call."; |
| 1032 | AliceInp << endl; |
| 1033 | AliceInp << "*No FLUKA card generated"; |
| 1034 | AliceInp << endl; |
| 1035 | } |
| 1036 | } // end of else if (strncmp(&sProcessFlag[i][0],"COMP",4) == 0) |
| 1037 | |
| 1038 | // decay |
| 1039 | // G3 default value: 1 |
| 1040 | // G4 process: G4Decay |
| 1041 | // |
| 1042 | // Particles: all which decay is applicable for |
| 1043 | // Physics: General |
| 1044 | // flag = 0 no decays |
| 1045 | // flag = 1 decays, secondaries processed |
| 1046 | // flag = 2 decays, no secondaries stored |
| 1047 | //gMC ->SetProcess("DCAY",1); // not available |
| 1048 | else if ((strncmp(&sProcessFlag[i][0],"DCAY",4) == 0) && iProcessValue[i] == 1) |
| 1049 | cout << "SetProcess for flag=" << &sProcessFlag[i][0] << " value=" << iProcessValue[i] << " not avaliable!" << endl; |
| 1050 | |
| 1051 | // delta-ray |
| 1052 | // G3 default value: 2 |
| 1053 | // !! G4 treats delta rays in different way |
| 1054 | // G4 processes: G4eIonisation/G4IeIonization, |
| 1055 | // G4MuIonisation/G4IMuIonization, |
| 1056 | // G4hIonisation/G4IhIonisation |
| 1057 | // Particles: charged |
| 1058 | // Physics: EM |
| 1059 | // flag = 0 no energy loss |
| 1060 | // flag = 1 restricted energy loss fluctuations |
| 1061 | // flag = 2 complete energy loss fluctuations |
| 1062 | // flag = 3 same as 1 |
| 1063 | // flag = 4 no energy loss fluctuations |
| 1064 | // gMC ->SetProcess("DRAY",0); // DELTARAY 1.E+6 0. 0. 3. lastmat 0. |
| 1065 | else if (strncmp(&sProcessFlag[i][0],"DRAY",4) == 0) { |
| 1066 | if (iProcessValue[i] == 0 || iProcessValue[i] == 4) { |
| 1067 | AliceInp << "*"; |
| 1068 | AliceInp << endl; |
| 1069 | AliceInp << "*Kinetic energy threshold (GeV) for delta ray production"; |
| 1070 | AliceInp << endl; |
| 1071 | AliceInp << "*Generated from call: SetProcess('DRAY',0) or SetProcess('DRAY',4)"; |
| 1072 | AliceInp << endl; |
| 1073 | AliceInp << "*No delta ray production by muons - threshold set artificially high"; |
| 1074 | AliceInp << endl; |
| 1075 | AliceInp << setw(10) << "DELTARAY "; |
| 1076 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1077 | AliceInp << setw(10) << 1.0e+6; // kinetic energy threshold (GeV) for delta ray production (discrete energy transfer) |
| 1078 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1079 | AliceInp << setw(10) << 0.0; // ignored |
| 1080 | AliceInp << setw(10) << 0.0; // ignored |
| 1081 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1082 | AliceInp << setw(10) << setprecision(2); |
| 1083 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1084 | AliceInp << setprecision(1); |
| 1085 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 1086 | AliceInp << endl; |
| 1087 | } |
| 1088 | else if (iProcessValue[i] == 1 || iProcessValue[i] == 2 || iProcessValue[i] == 3) { |
| 1089 | AliceInp << "*"; |
| 1090 | AliceInp << endl; |
| 1091 | AliceInp << "*Kinetic energy threshold (GeV) for delta ray production"; |
| 1092 | AliceInp << endl; |
| 1093 | AliceInp << "*Generated from call: SetProcess('DRAY',flag), flag=1,2,3"; |
| 1094 | AliceInp << endl; |
| 1095 | AliceInp << "*Delta ray production by muons switched on"; |
| 1096 | AliceInp << endl; |
| 1097 | AliceInp << "*Energy threshold set by call SetCut('DCUTM',cut) or set to 0."; |
| 1098 | AliceInp << endl; |
| 1099 | AliceInp << setw(10) << "DELTARAY "; |
| 1100 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1101 | fCut = 1.0e+6; |
| 1102 | for (j=0; j<iNbOfCut; j++) { |
| 1103 | if (strncmp(&sCutFlag[j][0],"DCUTM",5) == 0) fCut = fCutValue[j]; |
| 1104 | } |
| 1105 | AliceInp << setw(10) << fCut; // kinetic energy threshold (GeV) for delta ray production (discrete energy transfer) |
| 1106 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1107 | AliceInp << setw(10) << 0.0; // ignored |
| 1108 | AliceInp << setw(10) << 0.0; // ignored |
| 1109 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1110 | AliceInp << setw(10) << setprecision(2); |
| 1111 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1112 | AliceInp << setprecision(1); |
| 1113 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 1114 | AliceInp << endl; |
| 1115 | } |
| 1116 | else { |
| 1117 | AliceInp << "*"; |
| 1118 | AliceInp << endl; |
| 1119 | AliceInp << "*Illegal flag value in SetProcess('DRAY',?) call."; |
| 1120 | AliceInp << endl; |
| 1121 | AliceInp << "*No FLUKA card generated"; |
| 1122 | AliceInp << endl; |
| 1123 | } |
| 1124 | } // end of else if (strncmp(&sProcessFlag[i][0],"DRAY",4) == 0) |
| 1125 | |
| 1126 | // hadronic process |
| 1127 | // G3 default value: 1 |
| 1128 | // G4 processes: all defined by TG4PhysicsConstructorHadron |
| 1129 | // |
| 1130 | // Particles: hadrons |
| 1131 | // Physics: Hadron |
| 1132 | // flag = 0 no multiple scattering |
| 1133 | // flag = 1 hadronic interactions, secondaries processed |
| 1134 | // flag = 2 hadronic interactions, no secondaries stored |
| 1135 | // gMC ->SetProcess("HADR",1); // ??? hadronic process |
| 1136 | //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3) ????? |
| 1137 | else if (strncmp(&sProcessFlag[i][0],"HADR",4) == 0) { |
| 1138 | if (iProcessValue[i] == 1 || iProcessValue[i] == 2) { |
| 1139 | AliceInp << "*"; |
| 1140 | AliceInp << endl; |
| 1141 | AliceInp << "*Hadronic interaction is ON by default in FLUKA"; |
| 1142 | AliceInp << endl; |
| 1143 | AliceInp << "*No FLUKA card generated"; |
| 1144 | AliceInp << endl; |
| 1145 | } |
| 1146 | else if (iProcessValue[i] == 0) { |
| 1147 | AliceInp << "*"; |
| 1148 | AliceInp << endl; |
| 1149 | AliceInp << "*Hadronic interaction is set OFF"; |
| 1150 | AliceInp << endl; |
| 1151 | AliceInp << "*Generated from call: SetProcess('HADR',0);"; |
| 1152 | AliceInp << endl; |
| 1153 | AliceInp << setw(10) << "MULSOPT "; |
| 1154 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1155 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1156 | AliceInp << setw(10) << 0.0; // ignored |
| 1157 | AliceInp << setw(10) << 3.0; // multiple scattering for hadrons and muons is completely suppressed |
| 1158 | AliceInp << setw(10) << 0.0; // no spin-relativistic corrections |
| 1159 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1160 | AliceInp << setprecision(2); |
| 1161 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1162 | AliceInp << endl; |
| 1163 | |
| 1164 | } |
| 1165 | else { |
| 1166 | AliceInp << "*"; |
| 1167 | AliceInp << endl; |
| 1168 | AliceInp << "*Illegal flag value in SetProcess('HADR',?) call."; |
| 1169 | AliceInp << endl; |
| 1170 | AliceInp << "*No FLUKA card generated"; |
| 1171 | AliceInp << endl; |
| 1172 | } |
| 1173 | } // end of else if (strncmp(&sProcessFlag[i][0],"HADR",4) == 0) |
| 1174 | |
| 1175 | |
| 1176 | // energy loss |
| 1177 | // G3 default value: 2 |
| 1178 | // G4 processes: G4eIonisation/G4IeIonization, |
| 1179 | // G4MuIonisation/G4IMuIonization, |
| 1180 | // G4hIonisation/G4IhIonisation |
| 1181 | // |
| 1182 | // Particles: charged |
| 1183 | // Physics: EM |
| 1184 | // flag=0 no energy loss |
| 1185 | // flag=1 restricted energy loss fluctuations |
| 1186 | // flag=2 complete energy loss fluctuations |
| 1187 | // flag=3 same as 1 |
| 1188 | // flag=4 no energy loss fluctuations |
| 1189 | // If the value ILOSS is changed, then (in G3) cross-sections and energy |
| 1190 | // loss tables must be recomputed via the command 'PHYSI' |
| 1191 | // gMC ->SetProcess("LOSS",2); // ??? IONFLUCT ? energy loss |
| 1192 | else if (strncmp(&sProcessFlag[i][0],"LOSS",4) == 0) { |
| 1193 | if (iProcessValue[i] == 2) { // complete energy loss fluctuations |
| 1194 | AliceInp << "*"; |
| 1195 | AliceInp << endl; |
| 1196 | AliceInp << "*Complete energy loss fluctuations do not exist in FLUKA"; |
| 1197 | AliceInp << endl; |
| 1198 | AliceInp << "*Generated from call: SetProcess('LOSS',2);"; |
| 1199 | AliceInp << endl; |
| 1200 | AliceInp << "*flag=2=complete energy loss fluctuations"; |
| 1201 | AliceInp << endl; |
| 1202 | AliceInp << "*No input card generated"; |
| 1203 | AliceInp << endl; |
| 1204 | } |
| 1205 | else if (iProcessValue[i] == 1 || iProcessValue[i] == 3) { // restricted energy loss fluctuations |
| 1206 | AliceInp << "*"; |
| 1207 | AliceInp << endl; |
| 1208 | AliceInp << "*Restricted energy loss fluctuations"; |
| 1209 | AliceInp << endl; |
| 1210 | AliceInp << "*Generated from call: SetProcess('LOSS',1) or SetProcess('LOSS',3)"; |
| 1211 | AliceInp << endl; |
| 1212 | AliceInp << setw(10) << "IONFLUCT "; |
| 1213 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1214 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1215 | AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations (for hadrons and muons) switched on |
| 1216 | AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations (for e+ and e-) switched on |
| 1217 | AliceInp << setw(10) << 1.0; // minimal accuracy |
| 1218 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1219 | AliceInp << setprecision(2); |
| 1220 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1221 | AliceInp << endl; |
| 1222 | } |
| 1223 | else if (iProcessValue[i] == 4) { // no energy loss fluctuations |
| 1224 | AliceInp << "*"; |
| 1225 | AliceInp << endl; |
| 1226 | AliceInp << "*No energy loss fluctuations"; |
| 1227 | AliceInp << endl; |
| 1228 | AliceInp << "*Generated from call: SetProcess('LOSS',4)"; |
| 1229 | AliceInp << endl; |
| 1230 | AliceInp << setw(10) << -1.0; // restricted energy loss fluctuations (for hadrons and muons) switched off |
| 1231 | AliceInp << setw(10) << -1.0; // restricted energy loss fluctuations (for e+ and e-) switched off |
| 1232 | AliceInp << setw(10) << 1.0; // minimal accuracy |
| 1233 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1234 | AliceInp << setprecision(2); |
| 1235 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1236 | AliceInp << endl; |
| 1237 | } |
| 1238 | else { |
| 1239 | AliceInp << "*"; |
| 1240 | AliceInp << endl; |
| 1241 | AliceInp << "*Illegal flag value in SetProcess('LOSS',?) call."; |
| 1242 | AliceInp << endl; |
| 1243 | AliceInp << "*No FLUKA card generated"; |
| 1244 | AliceInp << endl; |
| 1245 | } |
| 1246 | } // end of else if (strncmp(&sProcessFlag[i][0],"LOSS",4) == 0) |
| 1247 | |
| 1248 | |
| 1249 | // multiple scattering |
| 1250 | // G3 default value: 1 |
| 1251 | // G4 process: G4MultipleScattering/G4IMultipleScattering |
| 1252 | // |
| 1253 | // Particles: charged |
| 1254 | // Physics: EM |
| 1255 | // flag = 0 no multiple scattering |
| 1256 | // flag = 1 Moliere or Coulomb scattering |
| 1257 | // flag = 2 Moliere or Coulomb scattering |
| 1258 | // flag = 3 Gaussian scattering |
| 1259 | // gMC ->SetProcess("MULS",1); // MULSOPT multiple scattering |
| 1260 | else if (strncmp(&sProcessFlag[i][0],"MULS",4) == 0) { |
| 1261 | if (iProcessValue[i] == 1 || iProcessValue[i] == 2 || iProcessValue[i] == 3) { |
| 1262 | AliceInp << "*"; |
| 1263 | AliceInp << endl; |
| 1264 | AliceInp << "*Multiple scattering is ON by default for e+e- and for hadrons/muons"; |
| 1265 | AliceInp << endl; |
| 1266 | AliceInp << "*No FLUKA card generated"; |
| 1267 | AliceInp << endl; |
| 1268 | } |
| 1269 | else if (iProcessValue[i] == 0) { |
| 1270 | AliceInp << "*"; |
| 1271 | AliceInp << endl; |
| 1272 | AliceInp << "*Multiple scattering is set OFF"; |
| 1273 | AliceInp << endl; |
| 1274 | AliceInp << "*Generated from call: SetProcess('MULS',0);"; |
| 1275 | AliceInp << endl; |
| 1276 | AliceInp << setw(10) << "MULSOPT "; |
| 1277 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1278 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1279 | AliceInp << setw(10) << 0.0; // ignored |
| 1280 | AliceInp << setw(10) << 3.0; // multiple scattering for hadrons and muons is completely suppressed |
| 1281 | AliceInp << setw(10) << 3.0; // multiple scattering for e+ and e- is completely suppressed |
| 1282 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1283 | AliceInp << setprecision(2); |
| 1284 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1285 | AliceInp << endl; |
| 1286 | } |
| 1287 | else { |
| 1288 | AliceInp << "*"; |
| 1289 | AliceInp << endl; |
| 1290 | AliceInp << "*Illegal flag value in SetProcess('MULS',?) call."; |
| 1291 | AliceInp << endl; |
| 1292 | AliceInp << "*No FLUKA card generated"; |
| 1293 | AliceInp << endl; |
| 1294 | } |
| 1295 | } // end of else if (strncmp(&sProcessFlag[i][0],"MULS",4) == 0) |
| 1296 | |
| 1297 | |
| 1298 | // muon nuclear interaction |
| 1299 | // G3 default value: 0 |
| 1300 | // G4 processes: G4MuNuclearInteraction, |
| 1301 | // G4MuonMinusCaptureAtRest |
| 1302 | // |
| 1303 | // Particles: mu |
| 1304 | // Physics: Not set |
| 1305 | // flag = 0 no muon-nuclear interaction |
| 1306 | // flag = 1 nuclear interaction, secondaries processed |
| 1307 | // flag = 2 nuclear interaction, secondaries not processed |
| 1308 | // gMC ->SetProcess("MUNU",1); // MUPHOTON 1. 0. 0. 3. lastmat |
| 1309 | else if (strncmp(&sProcessFlag[i][0],"MUNU",4) == 0) { |
| 1310 | if (iProcessValue[i] == 1) { |
| 1311 | AliceInp << "*"; |
| 1312 | AliceInp << endl; |
| 1313 | AliceInp << "*Muon nuclear interactions with production of secondary hadrons"; |
| 1314 | AliceInp << endl; |
| 1315 | AliceInp << "*Generated from call: SetProcess('MUNU',1);"; |
| 1316 | AliceInp << endl; |
| 1317 | AliceInp << setw(10) << "MUPHOTON "; |
| 1318 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1319 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1320 | AliceInp << setw(10) << 1.0; // full simulation of muon nuclear interactions and production of secondary hadrons |
| 1321 | AliceInp << setw(10) << 0.0; // ratio of longitudinal to transverse virtual photon cross-section - Default = 0.25. |
| 1322 | AliceInp << setw(10) << 0.0; // fraction of rho-like interactions ( must be < 1) - Default = 0.75. |
| 1323 | AliceInp << setprecision(1); |
| 1324 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1325 | AliceInp << setprecision(2); |
| 1326 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1327 | AliceInp << endl; |
| 1328 | } |
| 1329 | else if (iProcessValue[i] == 2) { |
| 1330 | AliceInp << "*"; |
| 1331 | AliceInp << endl; |
| 1332 | AliceInp << "*Muon nuclear interactions without production of secondary hadrons"; |
| 1333 | AliceInp << endl; |
| 1334 | AliceInp << "*Generated from call: SetProcess('MUNU',2);"; |
| 1335 | AliceInp << endl; |
| 1336 | AliceInp << setw(10) << "MUPHOTON "; |
| 1337 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1338 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1339 | AliceInp << setw(10) << 2.0; // full simulation of muon nuclear interactions and production of secondary hadrons |
| 1340 | AliceInp << setw(10) << 0.0; // ratio of longitudinal to transverse virtual photon cross-section - Default = 0.25. |
| 1341 | AliceInp << setw(10) << 0.0; // fraction of rho-like interactions ( must be < 1) - Default = 0.75. |
| 1342 | AliceInp << setprecision(1); |
| 1343 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1344 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1345 | AliceInp << endl; |
| 1346 | } |
| 1347 | else if (iProcessValue[i] == 0) { |
| 1348 | AliceInp << "*"; |
| 1349 | AliceInp << endl; |
| 1350 | AliceInp << "*No muon nuclear interaction - no FLUKA card generated"; |
| 1351 | AliceInp << endl; |
| 1352 | AliceInp << "*Generated from call: SetProcess('MUNU',0)"; |
| 1353 | AliceInp << endl; |
| 1354 | } |
| 1355 | else { |
| 1356 | AliceInp << "*"; |
| 1357 | AliceInp << endl; |
| 1358 | AliceInp << "*Illegal flag value in SetProcess('MUNU',?) call."; |
| 1359 | AliceInp << endl; |
| 1360 | AliceInp << "*No FLUKA card generated"; |
| 1361 | AliceInp << endl; |
| 1362 | } |
| 1363 | } // end of else if (strncmp(&sProcessFlag[i][0],"MUNU",4) == 0) |
| 1364 | |
| 1365 | |
| 1366 | // photofission |
| 1367 | // G3 default value: 0 |
| 1368 | // G4 process: ?? |
| 1369 | // |
| 1370 | // Particles: gamma |
| 1371 | // Physics: ?? |
| 1372 | // gMC ->SetProcess("PFIS",0); // PHOTONUC -1. 0. 0. 3. lastmat 0. |
| 1373 | // flag = 0 no photon fission |
| 1374 | // flag = 1 photon fission, secondaries processed |
| 1375 | // flag = 2 photon fission, no secondaries stored |
| 1376 | else if (strncmp(&sProcessFlag[i][0],"PFIS",4) == 0) { |
| 1377 | if (iProcessValue[i] == 0) { |
| 1378 | AliceInp << "*"; |
| 1379 | AliceInp << endl; |
| 1380 | AliceInp << "*No photonuclear interactions"; |
| 1381 | AliceInp << endl; |
| 1382 | AliceInp << "*Generated from call: SetProcess('PFIS',0);"; |
| 1383 | AliceInp << endl; |
| 1384 | AliceInp << setw(10) << "PHOTONUC "; |
| 1385 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1386 | AliceInp << setw(10) << -1.0; // no photonuclear interactions |
| 1387 | AliceInp << setw(10) << 0.0; // not used |
| 1388 | AliceInp << setw(10) << 0.0; // not used |
| 1389 | AliceInp << setw(10) << 3.0; // upper bound of the material indices in which the respective thresholds apply |
| 1390 | AliceInp << setprecision(2); |
| 1391 | AliceInp << setw(10) << fLastMaterial; |
| 1392 | AliceInp << setprecision(1); // upper bound of the material indices in which the respective thresholds apply |
| 1393 | AliceInp << setprecision(1); |
| 1394 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 1395 | AliceInp << endl; |
| 1396 | } |
| 1397 | else if (iProcessValue[i] == 1) { |
| 1398 | AliceInp << "*"; |
| 1399 | AliceInp << endl; |
| 1400 | AliceInp << "*Photon nuclear interactions are activated at all energies"; |
| 1401 | AliceInp << endl; |
| 1402 | AliceInp << "*Generated from call: SetProcess('PFIS',1);"; |
| 1403 | AliceInp << endl; |
| 1404 | AliceInp << setw(10) << "PHOTONUC "; |
| 1405 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1406 | AliceInp << setw(10) << 1.0; // photonuclear interactions are activated at all energies |
| 1407 | AliceInp << setw(10) << 0.0; // not used |
| 1408 | AliceInp << setw(10) << 0.0; // not used |
| 1409 | AliceInp << setprecision(2); |
| 1410 | AliceInp << setw(10) << 3.0; // upper bound of the material indices in which the respective thresholds apply |
| 1411 | AliceInp << setw(10) << fLastMaterial; |
| 1412 | AliceInp << setprecision(1); // upper bound of the material indices in which the respective thresholds apply |
| 1413 | AliceInp << setprecision(1); |
| 1414 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 1415 | AliceInp << endl; |
| 1416 | } |
| 1417 | else if (iProcessValue[i] == 0) { |
| 1418 | AliceInp << "*"; |
| 1419 | AliceInp << endl; |
| 1420 | AliceInp << "*No photofission - no FLUKA card generated"; |
| 1421 | AliceInp << endl; |
| 1422 | AliceInp << "*Generated from call: SetProcess('PFIS',0)"; |
| 1423 | AliceInp << endl; |
| 1424 | } |
| 1425 | else { |
| 1426 | AliceInp << "*"; |
| 1427 | AliceInp << endl; |
| 1428 | AliceInp << "*Illegal flag value in SetProcess('PFIS',?) call."; |
| 1429 | AliceInp << endl; |
| 1430 | AliceInp << "*No FLUKA card generated"; |
| 1431 | AliceInp << endl; |
| 1432 | } |
| 1433 | } |
| 1434 | |
| 1435 | |
| 1436 | // photo electric effect |
| 1437 | // G3 default value: 1 |
| 1438 | // G4 processes: G4PhotoElectricEffect |
| 1439 | // G4LowEnergyPhotoElectric |
| 1440 | // Particles: gamma |
| 1441 | // Physics: EM |
| 1442 | // flag = 0 no photo electric effect |
| 1443 | // flag = 1 photo electric effect, electron processed |
| 1444 | // flag = 2 photo electric effect, no electron stored |
| 1445 | // gMC ->SetProcess("PHOT",1); // EMFCUT 0. -1. 0. 3. lastmat 0. PHOT-THR |
| 1446 | else if (strncmp(&sProcessFlag[i][0],"PHOT",4) == 0) { |
| 1447 | if (iProcessValue[i] == 1 || iProcessValue[i] == 2) { |
| 1448 | AliceInp << "*"; |
| 1449 | AliceInp << endl; |
| 1450 | AliceInp << "*Photo electric effect is activated"; |
| 1451 | AliceInp << endl; |
| 1452 | AliceInp << "*Generated from call: SetProcess('PHOT',1);"; |
| 1453 | AliceInp << endl; |
| 1454 | AliceInp << setw(10) << "EMFCUT "; |
| 1455 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1456 | AliceInp << setw(10) << 0.0; // ignored |
| 1457 | AliceInp << setw(10) << -1.0; // resets to default=0. |
| 1458 | AliceInp << setw(10) << 0.0; // ignored |
| 1459 | AliceInp << setw(10) << 3.0; // upper bound of the material indices in which the respective thresholds apply |
| 1460 | AliceInp << setprecision(2); |
| 1461 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1462 | AliceInp << setprecision(1); |
| 1463 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 1464 | AliceInp << setw(8) << "PHOT-THR"; |
| 1465 | AliceInp << endl; |
| 1466 | } |
| 1467 | else if (iProcessValue[i] == 0) { |
| 1468 | AliceInp << "*"; |
| 1469 | AliceInp << endl; |
| 1470 | AliceInp << "*No photo electric effect - no FLUKA card generated"; |
| 1471 | AliceInp << endl; |
| 1472 | AliceInp << "*Generated from call: SetProcess('PHOT',0)"; |
| 1473 | AliceInp << endl; |
| 1474 | } |
| 1475 | else { |
| 1476 | AliceInp << "*"; |
| 1477 | AliceInp << endl; |
| 1478 | AliceInp << "*Illegal flag value in SetProcess('PHOT',?) call."; |
| 1479 | AliceInp << endl; |
| 1480 | AliceInp << "*No FLUKA card generated"; |
| 1481 | AliceInp << endl; |
| 1482 | } |
| 1483 | } // else if (strncmp(&sProcessFlag[i][0],"PHOT",4) == 0) |
| 1484 | |
| 1485 | |
| 1486 | // Rayleigh scattering |
| 1487 | // G3 default value: 0 |
| 1488 | // G4 process: G4OpRayleigh |
| 1489 | // |
| 1490 | // Particles: optical photon |
| 1491 | // Physics: Optical |
| 1492 | // flag = 0 Rayleigh scattering off |
| 1493 | // flag = 1 Rayleigh scattering on |
| 1494 | //xx gMC ->SetProcess("RAYL",1); |
| 1495 | else if (strncmp(&sProcessFlag[i][0],"RAYL",4) == 0) { |
| 1496 | if (iProcessValue[i] == 1) { |
| 1497 | AliceInp << "*"; |
| 1498 | AliceInp << endl; |
| 1499 | AliceInp << "*Rayleigh scattering is ON by default in FLUKA"; |
| 1500 | AliceInp << endl; |
| 1501 | AliceInp << "*No FLUKA card generated"; |
| 1502 | AliceInp << endl; |
| 1503 | } |
| 1504 | else if (iProcessValue[i] == 0) { |
| 1505 | AliceInp << "*"; |
| 1506 | AliceInp << endl; |
| 1507 | AliceInp << "*Rayleigh scattering is set OFF"; |
| 1508 | AliceInp << endl; |
| 1509 | AliceInp << "*Generated from call: SetProcess('RAYL',0);"; |
| 1510 | AliceInp << endl; |
| 1511 | AliceInp << setw(10) << "EMFRAY "; |
| 1512 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1513 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1514 | AliceInp << setw(10) << -1.0; // no Rayleigh scattering and no binding corrections for Compton |
| 1515 | AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply |
| 1516 | AliceInp << setprecision(2); |
| 1517 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1518 | AliceInp << endl; |
| 1519 | } |
| 1520 | else { |
| 1521 | AliceInp << "*"; |
| 1522 | AliceInp << endl; |
| 1523 | AliceInp << "*Illegal flag value in SetProcess('RAYL',?) call."; |
| 1524 | AliceInp << endl; |
| 1525 | AliceInp << "*No FLUKA card generated"; |
| 1526 | AliceInp << endl; |
| 1527 | } |
| 1528 | } // end of else if (strncmp(&sProcessFlag[i][0],"RAYL",4) == 0) |
| 1529 | |
| 1530 | |
| 1531 | // synchrotron radiation in magnetic field |
| 1532 | // G3 default value: 0 |
| 1533 | // G4 process: G4SynchrotronRadiation |
| 1534 | // |
| 1535 | // Particles: ?? |
| 1536 | // Physics: Not set |
| 1537 | // flag = 0 no synchrotron radiation |
| 1538 | // flag = 1 synchrotron radiation |
| 1539 | //xx gMC ->SetProcess("SYNC",1); // synchrotron radiation generation |
| 1540 | else if (strncmp(&sProcessFlag[i][0],"SYNC",4) == 0) { |
| 1541 | AliceInp << "*"; |
| 1542 | AliceInp << endl; |
| 1543 | AliceInp << "*Synchrotron radiation generation is NOT implemented in FLUKA"; |
| 1544 | AliceInp << endl; |
| 1545 | AliceInp << "*No FLUKA card generated"; |
| 1546 | AliceInp << endl; |
| 1547 | } |
| 1548 | |
| 1549 | |
| 1550 | // Automatic calculation of tracking medium parameters |
| 1551 | // flag = 0 no automatic calculation |
| 1552 | // flag = 1 automatic calculation |
| 1553 | //xx gMC ->SetProcess("AUTO",1); // ??? automatic computation of the tracking medium parameters |
| 1554 | else if (strncmp(&sProcessFlag[i][0],"AUTO",4) == 0) { |
| 1555 | AliceInp << "*"; |
| 1556 | AliceInp << endl; |
| 1557 | AliceInp << "*Automatic calculation of tracking medium parameters is always ON in FLUKA"; |
| 1558 | AliceInp << endl; |
| 1559 | AliceInp << "*No FLUKA card generated"; |
| 1560 | AliceInp << endl; |
| 1561 | } |
| 1562 | |
| 1563 | |
| 1564 | // To control energy loss fluctuation model |
| 1565 | // flag = 0 Urban model |
| 1566 | // flag = 1 PAI model |
| 1567 | // flag = 2 PAI+ASHO model (not active at the moment) |
| 1568 | //xx gMC ->SetProcess("STRA",1); // ??? energy fluctuation model |
| 1569 | else if (strncmp(&sProcessFlag[i][0],"STRA",4) == 0) { |
| 1570 | if (iProcessValue[i] == 0 || iProcessValue[i] == 2 || iProcessValue[i] == 3) { |
| 1571 | AliceInp << "*"; |
| 1572 | AliceInp << endl; |
| 1573 | AliceInp << "*Ionization energy losses calculation is activated"; |
| 1574 | AliceInp << endl; |
| 1575 | AliceInp << "*Generated from call: SetProcess('STRA',n);, n=0,1,2"; |
| 1576 | AliceInp << endl; |
| 1577 | AliceInp << setw(10) << "IONFLUCT "; |
| 1578 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1579 | AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations |
| 1580 | // (for hadrons and muons) switched on |
| 1581 | AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations |
| 1582 | // (for e+ and e-) switched on |
| 1583 | AliceInp << setw(10) << 1.0; // minimal accuracy |
| 1584 | AliceInp << setw(10) << 3.0; // upper bound of the material indices in |
| 1585 | // which the respective thresholds apply |
| 1586 | AliceInp << setprecision(2); |
| 1587 | AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply |
| 1588 | AliceInp << setprecision(1); |
| 1589 | AliceInp << setw(10) << 1.0; // step length in assigning indices |
| 1590 | AliceInp << endl; |
| 1591 | } |
| 1592 | else { |
| 1593 | AliceInp << "*"; |
| 1594 | AliceInp << endl; |
| 1595 | AliceInp << "*Illegal flag value in SetProcess('STRA',?) call."; |
| 1596 | AliceInp << endl; |
| 1597 | AliceInp << "*No FLUKA card generated"; |
| 1598 | AliceInp << endl; |
| 1599 | } |
| 1600 | } // else if (strncmp(&sProcessFlag[i][0],"STRA",4) == 0) |
| 1601 | |
| 1602 | |
| 1603 | |
| 1604 | |
| 1605 | else { // processes not yet treated |
| 1606 | |
| 1607 | // light photon absorption (Cerenkov photons) |
| 1608 | // it is turned on when Cerenkov process is turned on |
| 1609 | // G3 default value: 0 |
| 1610 | // G4 process: G4OpAbsorption, G4OpBoundaryProcess |
| 1611 | // |
| 1612 | // Particles: optical photon |
| 1613 | // Physics: Optical |
| 1614 | // flag = 0 no absorption of Cerenkov photons |
| 1615 | // flag = 1 absorption of Cerenkov photons |
| 1616 | // gMC ->SetProcess("LABS",2); // ??? Cerenkov light absorption |
| 1617 | |
| 1618 | |
| 1619 | |
| 1620 | cout << "SetProcess for flag=" << &sProcessFlag[i][0] << " value=" << iProcessValue[i] << " not yet implemented!" << endl; |
| 1621 | } |
| 1622 | } //end of loop number of SetProcess calls |
| 1623 | |
| 1624 | |
| 1625 | // Loop over number of SetCut calls |
| 1626 | for (Int_t i=0; i<iNbOfCut; i++) { |
| 1627 | |
| 1628 | // cuts used in SetProcess calls |
| 1629 | if (strncmp(&sCutFlag[i][0],"BCUTM",5) == 0) continue; |
| 1630 | else if (strncmp(&sCutFlag[i][0],"BCUTE",5) == 0) continue; |
| 1631 | else if (strncmp(&sCutFlag[i][0],"DCUTM",5) == 0) continue; |
| 1632 | else if (strncmp(&sCutFlag[i][0],"PPCUTM",6) == 0) continue; |
| 1633 | |
| 1634 | // gammas |
| 1635 | // G4 particles: "gamma" |
| 1636 | // G3 default value: 0.001 GeV |
| 1637 | //gMC ->SetCut("CUTGAM",cut); // cut for gammas |
| 1638 | else if (strncmp(&sCutFlag[i][0],"CUTGAM",6) == 0) { |
| 1639 | AliceInp << "*"; |
| 1640 | AliceInp << endl; |
| 1641 | AliceInp << "*Cut for gamma"; |
| 1642 | AliceInp << endl; |
| 1643 | AliceInp << "*Generated from call: SetCut('CUTGAM',cut);"; |
| 1644 | AliceInp << endl; |
| 1645 | AliceInp << setw(10) << "PART-THR "; |
| 1646 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1647 | AliceInp << setw(10) << -fCutValue[i]; |
| 1648 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1649 | AliceInp << setw(10) << 7.0; |
| 1650 | AliceInp << endl; |
| 1651 | } |
| 1652 | |
| 1653 | // electrons |
| 1654 | // G4 particles: "e-" |
| 1655 | // ?? positrons |
| 1656 | // G3 default value: 0.001 GeV |
| 1657 | //gMC ->SetCut("CUTELE",cut); // cut for e+,e- |
| 1658 | else if (strncmp(&sCutFlag[i][0],"CUTELE",6) == 0) { |
| 1659 | AliceInp << "*"; |
| 1660 | AliceInp << endl; |
| 1661 | AliceInp << "*Cut for electrons"; |
| 1662 | AliceInp << endl; |
| 1663 | AliceInp << "*Generated from call: SetCut('CUTELE',cut);"; |
| 1664 | AliceInp << endl; |
| 1665 | AliceInp << setw(10) << "PART-THR "; |
| 1666 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1667 | AliceInp << setw(10) << -fCutValue[i]; |
| 1668 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1669 | AliceInp << setw(10) << 3.0; |
| 1670 | AliceInp << setw(10) << 4.0; |
| 1671 | AliceInp << setw(10) << 1.0; |
| 1672 | AliceInp << endl; |
| 1673 | } |
| 1674 | |
| 1675 | // neutral hadrons |
| 1676 | // G4 particles: of type "baryon", "meson", "nucleus" with zero charge |
| 1677 | // G3 default value: 0.01 GeV |
| 1678 | //gMC ->SetCut("CUTNEU",cut); // cut for neutral hadrons |
| 1679 | else if (strncmp(&sCutFlag[i][0],"CUTNEU",6) == 0) { |
| 1680 | AliceInp << "*"; |
| 1681 | AliceInp << endl; |
| 1682 | AliceInp << "*Cut for neutral hadrons"; |
| 1683 | AliceInp << endl; |
| 1684 | AliceInp << "*Generated from call: SetCut('CUTNEU',cut);"; |
| 1685 | AliceInp << endl; |
| 1686 | AliceInp << setw(10) << "PART-THR "; |
| 1687 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1688 | AliceInp << setw(10) << -fCutValue[i]; |
| 1689 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1690 | AliceInp << setw(10) << 8.0; // Neutron |
| 1691 | AliceInp << setw(10) << 9.0; // Antineutron |
| 1692 | AliceInp << endl; |
| 1693 | AliceInp << setw(10) << "PART-THR "; |
| 1694 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1695 | AliceInp << setw(10) << -fCutValue[i]; |
| 1696 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1697 | AliceInp << setw(10) << 12.0; // Kaon zero long |
| 1698 | AliceInp << setw(10) << 12.0; // Kaon zero long |
| 1699 | AliceInp << endl; |
| 1700 | AliceInp << setw(10) << "PART-THR "; |
| 1701 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1702 | AliceInp << setw(10) << -fCutValue[i]; |
| 1703 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1704 | AliceInp << setw(10) << 17.0; // Lambda, 18=Antilambda |
| 1705 | AliceInp << setw(10) << 19.0; // Kaon zero short |
| 1706 | AliceInp << endl; |
| 1707 | AliceInp << setw(10) << "PART-THR "; |
| 1708 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1709 | AliceInp << setw(10) << -fCutValue[i]; |
| 1710 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1711 | AliceInp << setw(10) << 22.0; // Sigma zero, Pion zero, Kaon zero |
| 1712 | AliceInp << setw(10) << 25.0; // Antikaon zero |
| 1713 | AliceInp << endl; |
| 1714 | AliceInp << setw(10) << "PART-THR "; |
| 1715 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1716 | AliceInp << setw(10) << -fCutValue[i]; |
| 1717 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1718 | AliceInp << setw(10) << 32.0; // Antisigma zero |
| 1719 | AliceInp << setw(10) << 32.0; // Antisigma zero |
| 1720 | AliceInp << endl; |
| 1721 | AliceInp << setw(10) << "PART-THR "; |
| 1722 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1723 | AliceInp << setw(10) << -fCutValue[i]; |
| 1724 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1725 | AliceInp << setw(10) << 34.0; // Xi zero |
| 1726 | AliceInp << setw(10) << 35.0; // AntiXi zero |
| 1727 | AliceInp << endl; |
| 1728 | AliceInp << setw(10) << "PART-THR "; |
| 1729 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1730 | AliceInp << setw(10) << -fCutValue[i]; |
| 1731 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1732 | AliceInp << setw(10) << 47.0; // D zero |
| 1733 | AliceInp << setw(10) << 48.0; // AntiD zero |
| 1734 | AliceInp << endl; |
| 1735 | AliceInp << setw(10) << "PART-THR "; |
| 1736 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1737 | AliceInp << setw(10) << -fCutValue[i]; |
| 1738 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1739 | AliceInp << setw(10) << 53.0; // Xi_c zero |
| 1740 | AliceInp << setw(10) << 53.0; // Xi_c zero |
| 1741 | AliceInp << endl; |
| 1742 | AliceInp << setw(10) << "PART-THR "; |
| 1743 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1744 | AliceInp << setw(10) << -fCutValue[i]; |
| 1745 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1746 | AliceInp << setw(10) << 55.0; // Xi'_c zero |
| 1747 | AliceInp << setw(10) << 56.0; // Omega_c zero |
| 1748 | AliceInp << endl; |
| 1749 | AliceInp << setw(10) << "PART-THR "; |
| 1750 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1751 | AliceInp << setw(10) << -fCutValue[i]; |
| 1752 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1753 | AliceInp << setw(10) << 59.0; // AntiXi_c zero |
| 1754 | AliceInp << setw(10) << 59.0; // AntiXi_c zero |
| 1755 | AliceInp << endl; |
| 1756 | AliceInp << setw(10) << "PART-THR "; |
| 1757 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1758 | AliceInp << setw(10) << -fCutValue[i]; |
| 1759 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1760 | AliceInp << setw(10) << 61.0; // AntiXi'_c zero |
| 1761 | AliceInp << setw(10) << 62.0; // AntiOmega_c zero |
| 1762 | AliceInp << endl; |
| 1763 | } |
| 1764 | |
| 1765 | // charged hadrons |
| 1766 | // G4 particles: of type "baryon", "meson", "nucleus" with non-zero charge |
| 1767 | // G3 default value: 0.01 GeV |
| 1768 | //gMC ->SetCut("CUTHAD",cut); // cut for charged hadrons |
| 1769 | else if (strncmp(&sCutFlag[i][0],"CUTHAD",6) == 0) { |
| 1770 | AliceInp << "*"; |
| 1771 | AliceInp << endl; |
| 1772 | AliceInp << "*Cut for charged hadrons"; |
| 1773 | AliceInp << endl; |
| 1774 | AliceInp << "*Generated from call: SetCut('CUTHAD',cut);"; |
| 1775 | AliceInp << endl; |
| 1776 | AliceInp << setw(10) << "PART-THR "; |
| 1777 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1778 | AliceInp << setw(10) << -fCutValue[i]; |
| 1779 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1780 | AliceInp << setw(10) << 1.0; // Proton |
| 1781 | AliceInp << setw(10) << 2.0; // Antiproton |
| 1782 | AliceInp << endl; |
| 1783 | AliceInp << setw(10) << "PART-THR "; |
| 1784 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1785 | AliceInp << setw(10) << -fCutValue[i]; |
| 1786 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1787 | AliceInp << setw(10) << 13.0; // Positive Pion, Negative Pion, Positive Kaon |
| 1788 | AliceInp << setw(10) << 16.0; // Negative Kaon |
| 1789 | AliceInp << endl; |
| 1790 | AliceInp << setw(10) << "PART-THR "; |
| 1791 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1792 | AliceInp << setw(10) << -fCutValue[i]; |
| 1793 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1794 | AliceInp << setw(10) << 20.0; // Negative Sigma |
| 1795 | AliceInp << setw(10) << 16.0; // Positive Sigma |
| 1796 | AliceInp << endl; |
| 1797 | AliceInp << setw(10) << "PART-THR "; |
| 1798 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1799 | AliceInp << setw(10) << -fCutValue[i]; |
| 1800 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1801 | AliceInp << setw(10) << 31.0; // Antisigma minus |
| 1802 | AliceInp << setw(10) << 33.0; // Antisigma plus |
| 1803 | AliceInp << setprecision(1); |
| 1804 | AliceInp << setw(10) << 2.0; // step length |
| 1805 | AliceInp << endl; |
| 1806 | AliceInp << setw(10) << "PART-THR "; |
| 1807 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1808 | AliceInp << setw(10) << -fCutValue[i]; |
| 1809 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1810 | AliceInp << setw(10) << 36.0; // Negative Xi, Positive Xi, Omega minus |
| 1811 | AliceInp << setw(10) << 39.0; // Antiomega |
| 1812 | AliceInp << endl; |
| 1813 | AliceInp << setw(10) << "PART-THR "; |
| 1814 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1815 | AliceInp << setw(10) << -fCutValue[i]; |
| 1816 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1817 | AliceInp << setw(10) << 45.0; // D plus |
| 1818 | AliceInp << setw(10) << 46.0; // D minus |
| 1819 | AliceInp << endl; |
| 1820 | AliceInp << setw(10) << "PART-THR "; |
| 1821 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1822 | AliceInp << setw(10) << -fCutValue[i]; |
| 1823 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1824 | AliceInp << setw(10) << 49.0; // D_s plus, D_s minus, Lambda_c plus |
| 1825 | AliceInp << setw(10) << 52.0; // Xi_c plus |
| 1826 | AliceInp << endl; |
| 1827 | AliceInp << setw(10) << "PART-THR "; |
| 1828 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1829 | AliceInp << setw(10) << -fCutValue[i]; |
| 1830 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1831 | AliceInp << setw(10) << 54.0; // Xi'_c plus |
| 1832 | AliceInp << setw(10) << 60.0; // AntiXi'_c minus |
| 1833 | AliceInp << setprecision(1); |
| 1834 | AliceInp << setw(10) << 6.0; // step length |
| 1835 | AliceInp << endl; |
| 1836 | AliceInp << setw(10) << "PART-THR "; |
| 1837 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1838 | AliceInp << setw(10) << -fCutValue[i]; |
| 1839 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2); |
| 1840 | AliceInp << setw(10) << 57.0; // Antilambda_c minus |
| 1841 | AliceInp << setw(10) << 58.0; // AntiXi_c minus |
| 1842 | AliceInp << endl; |
| 1843 | } |
| 1844 | |
| 1845 | // muons |
| 1846 | // G4 particles: "mu+", "mu-" |
| 1847 | // G3 default value: 0.01 GeV |
| 1848 | //gMC ->SetCut("CUTMUO",cut); // cut for mu+, mu- |
| 1849 | else if (strncmp(&sCutFlag[i][0],"CUTMUO",6) == 0) { |
| 1850 | AliceInp << "*"; |
| 1851 | AliceInp << endl; |
| 1852 | AliceInp << "*Cut for muons"; |
| 1853 | AliceInp << endl; |
| 1854 | AliceInp << "*Generated from call: SetCut('CUTMUO',cut);"; |
| 1855 | AliceInp << endl; |
| 1856 | AliceInp << setw(10) << "PART-THR "; |
| 1857 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1858 | AliceInp << setw(10) << -fCutValue[i]; |
| 1859 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1860 | AliceInp << setprecision(2); |
| 1861 | AliceInp << setw(10) << 10.0; |
| 1862 | AliceInp << setw(10) << 11.0; |
| 1863 | AliceInp << endl; |
| 1864 | } |
| 1865 | // delta-rays by electrons |
| 1866 | // G4 particles: "e-" |
| 1867 | // G3 default value: 10**4 GeV |
| 1868 | // gMC ->SetCut("DCUTE",cut); // cut for deltarays by electrons ??????????????? |
| 1869 | else if (strncmp(&sCutFlag[i][0],"DCUTE",5) == 0) { |
| 1870 | AliceInp << "*"; |
| 1871 | AliceInp << endl; |
| 1872 | AliceInp << "*Cut for delta rays by electrons ????????????"; |
| 1873 | AliceInp << endl; |
| 1874 | AliceInp << "*Generated from call: SetCut('DCUTE',cut);"; |
| 1875 | AliceInp << endl; |
| 1876 | AliceInp << setw(10) << "EMFCUT "; |
| 1877 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1878 | AliceInp << setw(10) << -fCutValue[i]; |
| 1879 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1880 | AliceInp << setw(10) << 0.0; |
| 1881 | AliceInp << setw(10) << 0.0; |
| 1882 | AliceInp << setw(10) << 3.0; |
| 1883 | AliceInp << setprecision(2); |
| 1884 | AliceInp << setw(10) << fLastMaterial; |
| 1885 | AliceInp << setprecision(1); |
| 1886 | AliceInp << setw(10) << 1.0; |
| 1887 | AliceInp << endl; |
| 1888 | } |
| 1889 | |
| 1890 | // |
| 1891 | // time of flight cut in seconds |
| 1892 | // G4 particles: all |
| 1893 | // G3 default value: 0.01 GeV |
| 1894 | //gMC ->SetCut("TOFMAX",tofmax); // time of flight cuts in seconds |
| 1895 | else if (strncmp(&sCutFlag[i][0],"TOFMAX",6) == 0) { |
| 1896 | AliceInp << "*"; |
| 1897 | AliceInp << endl; |
| 1898 | AliceInp << "*Time of flight cuts in seconds"; |
| 1899 | AliceInp << endl; |
| 1900 | AliceInp << "*Generated from call: SetCut('TOFMAX',tofmax);"; |
| 1901 | AliceInp << endl; |
| 1902 | AliceInp << setw(10) << "TIME-CUT "; |
| 1903 | AliceInp << setiosflags(ios::scientific) << setprecision(5); |
| 1904 | AliceInp << setw(10) << fCutValue[i]*1.e9; |
| 1905 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1); |
| 1906 | AliceInp << setw(10) << 0.0; |
| 1907 | AliceInp << setw(10) << 0.0; |
| 1908 | AliceInp << setw(10) << -6.0; // lower bound of the particle numbers for which the transport time cut-off and/or the start signal is to be applied |
| 1909 | AliceInp << setprecision(2); |
| 1910 | AliceInp << setw(10) << 64.0; // upper bound of the particle numbers for which the transport time cut-off and/or the start signal is to be applied |
| 1911 | AliceInp << setprecision(1); |
| 1912 | AliceInp << setw(10) << 1.0; // step length in assigning numbers |
| 1913 | AliceInp << endl; |
| 1914 | } |
| 1915 | |
| 1916 | else { |
| 1917 | cout << "SetCut for flag=" << &sCutFlag[i][0] << " value=" << fCutValue[i] << " not yet implemented!" << endl; |
| 1918 | } |
| 1919 | } //end of loop over SeCut calls |
| 1920 | |
| 1921 | // Add START and STOP card |
| 1922 | AliceInp << setw(10) << "START "; |
| 1923 | AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint); |
| 1924 | AliceInp << setw(10) << fEventsPerRun; |
| 1925 | AliceInp << endl; |
| 1926 | AliceInp << setw(10) << "STOP "; |
| 1927 | AliceInp << endl; |
| 1928 | |
| 1929 | } // end of InitPhysics |
| 1930 | |
| 1931 | |
| 1932 | //______________________________________________________________________________ |
| 1933 | void TFluka::SetMaxStep(Double_t) |
| 1934 | { |
| 1935 | // SetMaxStep is dummy procedure in TFluka ! |
| 1936 | if (fVerbosityLevel >=3) |
| 1937 | cout << "SetMaxStep is dummy procedure in TFluka !" << endl; |
| 1938 | } |
| 1939 | |
| 1940 | //______________________________________________________________________________ |
| 1941 | void TFluka::SetMaxNStep(Int_t) |
| 1942 | { |
| 1943 | // SetMaxNStep is dummy procedure in TFluka ! |
| 1944 | if (fVerbosityLevel >=3) |
| 1945 | cout << "SetMaxNStep is dummy procedure in TFluka !" << endl; |
| 1946 | } |
| 1947 | |
| 1948 | //______________________________________________________________________________ |
| 1949 | void TFluka::SetUserDecay(Int_t) |
| 1950 | { |
| 1951 | // SetUserDecay is dummy procedure in TFluka ! |
| 1952 | if (fVerbosityLevel >=3) |
| 1953 | cout << "SetUserDecay is dummy procedure in TFluka !" << endl; |
| 1954 | } |
| 1955 | |
| 1956 | // |
| 1957 | // dynamic properties |
| 1958 | // |
| 1959 | //______________________________________________________________________________ |
| 1960 | void TFluka::TrackPosition(TLorentzVector& position) const |
| 1961 | { |
| 1962 | // Return the current position in the master reference frame of the |
| 1963 | // track being transported |
| 1964 | // TRACKR.atrack = age of the particle |
| 1965 | // TRACKR.xtrack = x-position of the last point |
| 1966 | // TRACKR.ytrack = y-position of the last point |
| 1967 | // TRACKR.ztrack = z-position of the last point |
| 1968 | Int_t caller = GetCaller(); |
| 1969 | if (caller == 1 || caller == 3 || caller == 6 || caller == 11 || caller == 12) { //bxdraw,endraw,usdraw |
| 1970 | position.SetX(GetXsco()); |
| 1971 | position.SetY(GetYsco()); |
| 1972 | position.SetZ(GetZsco()); |
| 1973 | position.SetT(TRACKR.atrack); |
| 1974 | } |
| 1975 | else if (caller == 4) { // mgdraw |
| 1976 | position.SetX(TRACKR.xtrack[TRACKR.ntrack]); |
| 1977 | position.SetY(TRACKR.ytrack[TRACKR.ntrack]); |
| 1978 | position.SetZ(TRACKR.ztrack[TRACKR.ntrack]); |
| 1979 | position.SetT(TRACKR.atrack); |
| 1980 | } |
| 1981 | else if (caller == 5) { // sodraw |
| 1982 | position.SetX(TRACKR.xtrack[TRACKR.ntrack]); |
| 1983 | position.SetY(TRACKR.ytrack[TRACKR.ntrack]); |
| 1984 | position.SetZ(TRACKR.ztrack[TRACKR.ntrack]); |
| 1985 | position.SetT(0); |
| 1986 | } |
| 1987 | else |
| 1988 | Warning("TrackPosition","position not available"); |
| 1989 | } |
| 1990 | |
| 1991 | //______________________________________________________________________________ |
| 1992 | void TFluka::TrackPosition(Double_t& x, Double_t& y, Double_t& z) const |
| 1993 | { |
| 1994 | // Return the current position in the master reference frame of the |
| 1995 | // track being transported |
| 1996 | // TRACKR.atrack = age of the particle |
| 1997 | // TRACKR.xtrack = x-position of the last point |
| 1998 | // TRACKR.ytrack = y-position of the last point |
| 1999 | // TRACKR.ztrack = z-position of the last point |
| 2000 | Int_t caller = GetCaller(); |
| 2001 | if (caller == 1 || caller == 3 || caller == 6 || caller == 11 || caller == 12) { //bxdraw,endraw,usdraw |
| 2002 | x = GetXsco(); |
| 2003 | y = GetYsco(); |
| 2004 | z = GetZsco(); |
| 2005 | } |
| 2006 | else if (caller == 4) { // mgdraw |
| 2007 | x = TRACKR.xtrack[TRACKR.ntrack]; |
| 2008 | y = TRACKR.ytrack[TRACKR.ntrack]; |
| 2009 | z = TRACKR.ztrack[TRACKR.ntrack]; |
| 2010 | } |
| 2011 | else if (caller == 5) { // sodraw |
| 2012 | x = TRACKR.xtrack[TRACKR.ntrack]; |
| 2013 | y = TRACKR.ytrack[TRACKR.ntrack]; |
| 2014 | z = TRACKR.ztrack[TRACKR.ntrack]; |
| 2015 | } |
| 2016 | else |
| 2017 | Warning("TrackPosition","position not available"); |
| 2018 | } |
| 2019 | |
| 2020 | //______________________________________________________________________________ |
| 2021 | void TFluka::TrackMomentum(TLorentzVector& momentum) const |
| 2022 | { |
| 2023 | // Return the direction and the momentum (GeV/c) of the track |
| 2024 | // currently being transported |
| 2025 | // TRACKR.ptrack = momentum of the particle (not always defined, if |
| 2026 | // < 0 must be obtained from etrack) |
| 2027 | // TRACKR.cx,y,ztrck = direction cosines of the current particle |
| 2028 | // TRACKR.etrack = total energy of the particle |
| 2029 | // TRACKR.jtrack = identity number of the particle |
| 2030 | // PAPROP.am[TRACKR.jtrack] = particle mass in gev |
| 2031 | Int_t caller = GetCaller(); |
| 2032 | if (caller != 2) { // not eedraw |
| 2033 | if (TRACKR.ptrack >= 0) { |
| 2034 | momentum.SetPx(TRACKR.ptrack*TRACKR.cxtrck); |
| 2035 | momentum.SetPy(TRACKR.ptrack*TRACKR.cytrck); |
| 2036 | momentum.SetPz(TRACKR.ptrack*TRACKR.cztrck); |
| 2037 | momentum.SetE(TRACKR.etrack); |
| 2038 | return; |
| 2039 | } |
| 2040 | else { |
| 2041 | Double_t p = sqrt(TRACKR.etrack*TRACKR.etrack - PAPROP.am[TRACKR.jtrack+6]*PAPROP.am[TRACKR.jtrack+6]); |
| 2042 | momentum.SetPx(p*TRACKR.cxtrck); |
| 2043 | momentum.SetPy(p*TRACKR.cytrck); |
| 2044 | momentum.SetPz(p*TRACKR.cztrck); |
| 2045 | momentum.SetE(TRACKR.etrack); |
| 2046 | return; |
| 2047 | } |
| 2048 | } |
| 2049 | else |
| 2050 | Warning("TrackMomentum","momentum not available"); |
| 2051 | } |
| 2052 | |
| 2053 | //______________________________________________________________________________ |
| 2054 | void TFluka::TrackMomentum(Double_t& px, Double_t& py, Double_t& pz, Double_t& e) const |
| 2055 | { |
| 2056 | // Return the direction and the momentum (GeV/c) of the track |
| 2057 | // currently being transported |
| 2058 | // TRACKR.ptrack = momentum of the particle (not always defined, if |
| 2059 | // < 0 must be obtained from etrack) |
| 2060 | // TRACKR.cx,y,ztrck = direction cosines of the current particle |
| 2061 | // TRACKR.etrack = total energy of the particle |
| 2062 | // TRACKR.jtrack = identity number of the particle |
| 2063 | // PAPROP.am[TRACKR.jtrack] = particle mass in gev |
| 2064 | Int_t caller = GetCaller(); |
| 2065 | if (caller != 2) { // not eedraw |
| 2066 | if (TRACKR.ptrack >= 0) { |
| 2067 | px = TRACKR.ptrack*TRACKR.cxtrck; |
| 2068 | py = TRACKR.ptrack*TRACKR.cytrck; |
| 2069 | pz = TRACKR.ptrack*TRACKR.cztrck; |
| 2070 | e = TRACKR.etrack; |
| 2071 | return; |
| 2072 | } |
| 2073 | else { |
| 2074 | Double_t p = sqrt(TRACKR.etrack*TRACKR.etrack - PAPROP.am[TRACKR.jtrack+6]*PAPROP.am[TRACKR.jtrack+6]); |
| 2075 | px = p*TRACKR.cxtrck; |
| 2076 | py = p*TRACKR.cytrck; |
| 2077 | pz = p*TRACKR.cztrck; |
| 2078 | e = TRACKR.etrack; |
| 2079 | return; |
| 2080 | } |
| 2081 | } |
| 2082 | else |
| 2083 | Warning("TrackMomentum","momentum not available"); |
| 2084 | } |
| 2085 | |
| 2086 | //______________________________________________________________________________ |
| 2087 | Double_t TFluka::TrackStep() const |
| 2088 | { |
| 2089 | // Return the length in centimeters of the current step |
| 2090 | // TRACKR.ctrack = total curved path |
| 2091 | Int_t caller = GetCaller(); |
| 2092 | if (caller == 1 || caller == 3 || caller == 6) //bxdraw,endraw,usdraw |
| 2093 | return 0.0; |
| 2094 | else if (caller == 4) //mgdraw |
| 2095 | return TRACKR.ctrack; |
| 2096 | else |
| 2097 | return -1.0; |
| 2098 | } |
| 2099 | |
| 2100 | //______________________________________________________________________________ |
| 2101 | Double_t TFluka::TrackLength() const |
| 2102 | { |
| 2103 | // TRACKR.cmtrck = cumulative curved path since particle birth |
| 2104 | Int_t caller = GetCaller(); |
| 2105 | if (caller == 1 || caller == 3 || caller == 4 || caller == 6) //bxdraw,endraw,mgdraw,usdraw |
| 2106 | return TRACKR.cmtrck; |
| 2107 | else |
| 2108 | return -1.0; |
| 2109 | } |
| 2110 | |
| 2111 | //______________________________________________________________________________ |
| 2112 | Double_t TFluka::TrackTime() const |
| 2113 | { |
| 2114 | // Return the current time of flight of the track being transported |
| 2115 | // TRACKR.atrack = age of the particle |
| 2116 | Int_t caller = GetCaller(); |
| 2117 | if (caller == 1 || caller == 3 || caller == 4 || caller == 6) //bxdraw,endraw,mgdraw,usdraw |
| 2118 | return TRACKR.atrack; |
| 2119 | else |
| 2120 | return -1; |
| 2121 | } |
| 2122 | |
| 2123 | //______________________________________________________________________________ |
| 2124 | Double_t TFluka::Edep() const |
| 2125 | { |
| 2126 | // Energy deposition |
| 2127 | // if TRACKR.ntrack = 0, TRACKR.mtrack = 0: |
| 2128 | // -->local energy deposition (the value and the point are not recorded in TRACKR) |
| 2129 | // but in the variable "rull" of the procedure "endraw.cxx" |
| 2130 | // if TRACKR.ntrack > 0, TRACKR.mtrack = 0: |
| 2131 | // -->no energy loss along the track |
| 2132 | // if TRACKR.ntrack > 0, TRACKR.mtrack > 0: |
| 2133 | // -->energy loss distributed along the track |
| 2134 | // TRACKR.dtrack = energy deposition of the jth deposition even |
| 2135 | Double_t sum = 0; |
| 2136 | for ( Int_t j=0;j<TRACKR.mtrack;j++) { |
| 2137 | sum +=TRACKR.dtrack[j]; |
| 2138 | } |
| 2139 | if (TRACKR.ntrack == 0 && TRACKR.mtrack == 0) |
| 2140 | return fRull + sum; |
| 2141 | else { |
| 2142 | return sum; |
| 2143 | } |
| 2144 | } |
| 2145 | |
| 2146 | //______________________________________________________________________________ |
| 2147 | Int_t TFluka::TrackPid() const |
| 2148 | { |
| 2149 | // Return the id of the particle transported |
| 2150 | // TRACKR.jtrack = identity number of the particle |
| 2151 | Int_t caller = GetCaller(); |
| 2152 | if (caller != 2) // not eedraw |
| 2153 | return PDGFromId(TRACKR.jtrack); |
| 2154 | else |
| 2155 | return -1000; |
| 2156 | } |
| 2157 | |
| 2158 | //______________________________________________________________________________ |
| 2159 | Double_t TFluka::TrackCharge() const |
| 2160 | { |
| 2161 | // Return charge of the track currently transported |
| 2162 | // PAPROP.ichrge = electric charge of the particle |
| 2163 | // TRACKR.jtrack = identity number of the particle |
| 2164 | Int_t caller = GetCaller(); |
| 2165 | if (caller != 2) // not eedraw |
| 2166 | return PAPROP.ichrge[TRACKR.jtrack+6]; |
| 2167 | else |
| 2168 | return -1000.0; |
| 2169 | } |
| 2170 | |
| 2171 | //______________________________________________________________________________ |
| 2172 | Double_t TFluka::TrackMass() const |
| 2173 | { |
| 2174 | // PAPROP.am = particle mass in GeV |
| 2175 | // TRACKR.jtrack = identity number of the particle |
| 2176 | Int_t caller = GetCaller(); |
| 2177 | if (caller != 2) // not eedraw |
| 2178 | return PAPROP.am[TRACKR.jtrack+6]; |
| 2179 | else |
| 2180 | return -1000.0; |
| 2181 | } |
| 2182 | |
| 2183 | //______________________________________________________________________________ |
| 2184 | Double_t TFluka::Etot() const |
| 2185 | { |
| 2186 | // TRACKR.etrack = total energy of the particle |
| 2187 | Int_t caller = GetCaller(); |
| 2188 | if (caller != 2) // not eedraw |
| 2189 | return TRACKR.etrack; |
| 2190 | else |
| 2191 | return -1000.0; |
| 2192 | } |
| 2193 | |
| 2194 | // |
| 2195 | // track status |
| 2196 | // |
| 2197 | //______________________________________________________________________________ |
| 2198 | Bool_t TFluka::IsNewTrack() const |
| 2199 | { |
| 2200 | // True if the track has positive cummulative length |
| 2201 | Int_t caller = GetCaller(); |
| 2202 | if (caller != 2) { // not eedraw |
| 2203 | if (TRACKR.cmtrck > 0.0) |
| 2204 | return 1; |
| 2205 | else |
| 2206 | return 0; |
| 2207 | } |
| 2208 | else |
| 2209 | return 0; |
| 2210 | } |
| 2211 | |
| 2212 | //______________________________________________________________________________ |
| 2213 | Bool_t TFluka::IsTrackInside() const |
| 2214 | { |
| 2215 | // True if the track is not at the boundary of the current volume |
| 2216 | // In Fluka a step is always inside one kind of material |
| 2217 | // If the step would go behind the region of one material, |
| 2218 | // it will be shortened to reach only the boundary. |
| 2219 | // Therefore IsTrackInside() is always true. |
| 2220 | Int_t caller = GetCaller(); |
| 2221 | if (caller == 1) // bxdraw |
| 2222 | return 0; |
| 2223 | else |
| 2224 | return 1; |
| 2225 | } |
| 2226 | |
| 2227 | //______________________________________________________________________________ |
| 2228 | Bool_t TFluka::IsTrackEntering() const |
| 2229 | { |
| 2230 | // True if this is the first step of the track in the current volume |
| 2231 | |
| 2232 | Int_t caller = GetCaller(); |
| 2233 | if (caller == 11) // bxdraw entering |
| 2234 | return 1; |
| 2235 | else return 0; |
| 2236 | } |
| 2237 | |
| 2238 | //______________________________________________________________________________ |
| 2239 | Bool_t TFluka::IsTrackExiting() const |
| 2240 | { |
| 2241 | Int_t caller = GetCaller(); |
| 2242 | if (caller == 12) // bxdraw exiting |
| 2243 | return 1; |
| 2244 | else return 0; |
| 2245 | } |
| 2246 | |
| 2247 | //______________________________________________________________________________ |
| 2248 | Bool_t TFluka::IsTrackOut() const |
| 2249 | { |
| 2250 | // True if the track is out of the setup |
| 2251 | // means escape |
| 2252 | // Icode = 14: escape - call from Kaskad |
| 2253 | // Icode = 23: escape - call from Emfsco |
| 2254 | // Icode = 32: escape - call from Kasneu |
| 2255 | // Icode = 40: escape - call from Kashea |
| 2256 | // Icode = 51: escape - call from Kasoph |
| 2257 | if (fIcode == 14 || |
| 2258 | fIcode == 23 || |
| 2259 | fIcode == 32 || |
| 2260 | fIcode == 40 || |
| 2261 | fIcode == 51) return 1; |
| 2262 | else return 0; |
| 2263 | } |
| 2264 | |
| 2265 | //______________________________________________________________________________ |
| 2266 | Bool_t TFluka::IsTrackDisappeared() const |
| 2267 | { |
| 2268 | // means all inelastic interactions and decays |
| 2269 | // fIcode from usdraw |
| 2270 | if (fIcode == 101 || // inelastic interaction |
| 2271 | fIcode == 102 || // particle decay |
| 2272 | fIcode == 214 || // in-flight annihilation |
| 2273 | fIcode == 215 || // annihilation at rest |
| 2274 | fIcode == 217 || // pair production |
| 2275 | fIcode == 221) return 1; |
| 2276 | else return 0; |
| 2277 | } |
| 2278 | |
| 2279 | //______________________________________________________________________________ |
| 2280 | Bool_t TFluka::IsTrackStop() const |
| 2281 | { |
| 2282 | // True if the track energy has fallen below the threshold |
| 2283 | // means stopped by signal or below energy threshold |
| 2284 | // Icode = 12: stopping particle - call from Kaskad |
| 2285 | // Icode = 15: time kill - call from Kaskad |
| 2286 | // Icode = 21: below threshold, iarg=1 - call from Emfsco |
| 2287 | // Icode = 22: below threshold, iarg=2 - call from Emfsco |
| 2288 | // Icode = 24: time kill - call from Emfsco |
| 2289 | // Icode = 31: below threshold - call from Kasneu |
| 2290 | // Icode = 33: time kill - call from Kasneu |
| 2291 | // Icode = 41: time kill - call from Kashea |
| 2292 | // Icode = 52: time kill - call from Kasoph |
| 2293 | if (fIcode == 12 || |
| 2294 | fIcode == 15 || |
| 2295 | fIcode == 21 || |
| 2296 | fIcode == 22 || |
| 2297 | fIcode == 24 || |
| 2298 | fIcode == 31 || |
| 2299 | fIcode == 33 || |
| 2300 | fIcode == 41 || |
| 2301 | fIcode == 52) return 1; |
| 2302 | else return 0; |
| 2303 | } |
| 2304 | |
| 2305 | //______________________________________________________________________________ |
| 2306 | Bool_t TFluka::IsTrackAlive() const |
| 2307 | { |
| 2308 | // means not disappeared or not out |
| 2309 | if (IsTrackDisappeared() || IsTrackOut() ) return 0; |
| 2310 | else return 1; |
| 2311 | } |
| 2312 | |
| 2313 | // |
| 2314 | // secondaries |
| 2315 | // |
| 2316 | |
| 2317 | //______________________________________________________________________________ |
| 2318 | Int_t TFluka::NSecondaries() const |
| 2319 | // Number of secondary particles generated in the current step |
| 2320 | // FINUC.np = number of secondaries except light and heavy ions |
| 2321 | // FHEAVY.npheav = number of secondaries for light and heavy secondary ions |
| 2322 | { |
| 2323 | Int_t caller = GetCaller(); |
| 2324 | if (caller == 6) // valid only after usdraw |
| 2325 | return FINUC.np + FHEAVY.npheav; |
| 2326 | else |
| 2327 | return 0; |
| 2328 | } // end of NSecondaries |
| 2329 | |
| 2330 | //______________________________________________________________________________ |
| 2331 | void TFluka::GetSecondary(Int_t isec, Int_t& particleId, |
| 2332 | TLorentzVector& position, TLorentzVector& momentum) |
| 2333 | { |
| 2334 | Int_t caller = GetCaller(); |
| 2335 | if (caller == 6) { // valid only after usdraw |
| 2336 | if (isec >= 0 && isec < FINUC.np) { |
| 2337 | particleId = PDGFromId(FINUC.kpart[isec]); |
| 2338 | position.SetX(fXsco); |
| 2339 | position.SetY(fYsco); |
| 2340 | position.SetZ(fZsco); |
| 2341 | position.SetT(TRACKR.atrack); |
| 2342 | // position.SetT(TRACKR.atrack+FINUC.agesec[isec]); //not yet implem. |
| 2343 | momentum.SetPx(FINUC.plr[isec]*FINUC.cxr[isec]); |
| 2344 | momentum.SetPy(FINUC.plr[isec]*FINUC.cyr[isec]); |
| 2345 | momentum.SetPz(FINUC.plr[isec]*FINUC.czr[isec]); |
| 2346 | momentum.SetE(FINUC.tki[isec] + PAPROP.am[FINUC.kpart[isec]+6]); |
| 2347 | } |
| 2348 | else if (isec >= FINUC.np && isec < FINUC.np + FHEAVY.npheav) { |
| 2349 | Int_t jsec = isec - FINUC.np; |
| 2350 | particleId = FHEAVY.kheavy[jsec]; // this is Fluka id !!! |
| 2351 | position.SetX(fXsco); |
| 2352 | position.SetY(fYsco); |
| 2353 | position.SetZ(fZsco); |
| 2354 | position.SetT(TRACKR.atrack); |
| 2355 | // position.SetT(TRACKR.atrack+FHEAVY.agheav[jsec]); //not yet implem. |
| 2356 | momentum.SetPx(FHEAVY.pheavy[jsec]*FHEAVY.cxheav[jsec]); |
| 2357 | momentum.SetPy(FHEAVY.pheavy[jsec]*FHEAVY.cyheav[jsec]); |
| 2358 | momentum.SetPz(FHEAVY.pheavy[jsec]*FHEAVY.czheav[jsec]); |
| 2359 | if (FHEAVY.tkheav[jsec] >= 3 && FHEAVY.tkheav[jsec] <= 6) |
| 2360 | momentum.SetE(FHEAVY.tkheav[jsec] + PAPROP.am[jsec+6]); |
| 2361 | else if (FHEAVY.tkheav[jsec] > 6) |
| 2362 | momentum.SetE(FHEAVY.tkheav[jsec] + FHEAVY.amnhea[jsec]); // to be checked !!! |
| 2363 | } |
| 2364 | else |
| 2365 | Warning("GetSecondary","isec out of range"); |
| 2366 | } |
| 2367 | else |
| 2368 | Warning("GetSecondary","no secondaries available"); |
| 2369 | } // end of GetSecondary |
| 2370 | |
| 2371 | //______________________________________________________________________________ |
| 2372 | TMCProcess TFluka::ProdProcess(Int_t) const |
| 2373 | // Name of the process that has produced the secondary particles |
| 2374 | // in the current step |
| 2375 | { |
| 2376 | const TMCProcess kIpNoProc = kPNoProcess; |
| 2377 | const TMCProcess kIpPDecay = kPDecay; |
| 2378 | const TMCProcess kIpPPair = kPPair; |
| 2379 | // const TMCProcess kIpPPairFromPhoton = kPPairFromPhoton; |
| 2380 | // const TMCProcess kIpPPairFromVirtualPhoton = kPPairFromVirtualPhoton; |
| 2381 | const TMCProcess kIpPCompton = kPCompton; |
| 2382 | const TMCProcess kIpPPhotoelectric = kPPhotoelectric; |
| 2383 | const TMCProcess kIpPBrem = kPBrem; |
| 2384 | // const TMCProcess kIpPBremFromHeavy = kPBremFromHeavy; |
| 2385 | // const TMCProcess kIpPBremFromElectronOrPositron = kPBremFromElectronOrPositron; |
| 2386 | const TMCProcess kIpPDeltaRay = kPDeltaRay; |
| 2387 | // const TMCProcess kIpPMoller = kPMoller; |
| 2388 | // const TMCProcess kIpPBhabha = kPBhabha; |
| 2389 | const TMCProcess kIpPAnnihilation = kPAnnihilation; |
| 2390 | // const TMCProcess kIpPAnnihilInFlight = kPAnnihilInFlight; |
| 2391 | // const TMCProcess kIpPAnnihilAtRest = kPAnnihilAtRest; |
| 2392 | const TMCProcess kIpPHadronic = kPHadronic; |
| 2393 | const TMCProcess kIpPMuonNuclear = kPMuonNuclear; |
| 2394 | const TMCProcess kIpPPhotoFission = kPPhotoFission; |
| 2395 | const TMCProcess kIpPRayleigh = kPRayleigh; |
| 2396 | // const TMCProcess kIpPCerenkov = kPCerenkov; |
| 2397 | // const TMCProcess kIpPSynchrotron = kPSynchrotron; |
| 2398 | |
| 2399 | Int_t mugamma = TRACKR.jtrack == 7 || TRACKR.jtrack == 10 || TRACKR.jtrack == 11; |
| 2400 | if (fIcode == 102) return kIpPDecay; |
| 2401 | else if (fIcode == 104 || fIcode == 217) return kIpPPair; |
| 2402 | // else if (fIcode == 104) return kIpPairFromPhoton; |
| 2403 | // else if (fIcode == 217) return kIpPPairFromVirtualPhoton; |
| 2404 | else if (fIcode == 219) return kIpPCompton; |
| 2405 | else if (fIcode == 221) return kIpPPhotoelectric; |
| 2406 | else if (fIcode == 105 || fIcode == 208) return kIpPBrem; |
| 2407 | // else if (fIcode == 105) return kIpPBremFromHeavy; |
| 2408 | // else if (fIcode == 208) return kPBremFromElectronOrPositron; |
| 2409 | else if (fIcode == 103 || fIcode == 400) return kIpPDeltaRay; |
| 2410 | else if (fIcode == 210 || fIcode == 212) return kIpPDeltaRay; |
| 2411 | // else if (fIcode == 210) return kIpPMoller; |
| 2412 | // else if (fIcode == 212) return kIpPBhabha; |
| 2413 | else if (fIcode == 214 || fIcode == 215) return kIpPAnnihilation; |
| 2414 | // else if (fIcode == 214) return kIpPAnnihilInFlight; |
| 2415 | // else if (fIcode == 215) return kIpPAnnihilAtRest; |
| 2416 | else if (fIcode == 101) return kIpPHadronic; |
| 2417 | else if (fIcode == 101) { |
| 2418 | if (!mugamma) return kIpPHadronic; |
| 2419 | else if (TRACKR.jtrack == 7) return kIpPPhotoFission; |
| 2420 | else return kIpPMuonNuclear; |
| 2421 | } |
| 2422 | else if (fIcode == 225) return kIpPRayleigh; |
| 2423 | // Fluka codes 100, 300 and 400 still to be investigasted |
| 2424 | else return kIpNoProc; |
| 2425 | } |
| 2426 | |
| 2427 | //Int_t StepProcesses(TArrayI &proc) const |
| 2428 | // Return processes active in the current step |
| 2429 | //{ |
| 2430 | //ck = total energy of the particl ???????????????? |
| 2431 | //} |
| 2432 | |
| 2433 | |
| 2434 | //______________________________________________________________________________ |
| 2435 | Int_t TFluka::VolId2Mate(Int_t id) const |
| 2436 | { |
| 2437 | // |
| 2438 | // Returns the material number for a given volume ID |
| 2439 | // |
| 2440 | return fGeom->VolId2Mate(id); |
| 2441 | } |
| 2442 | |
| 2443 | //______________________________________________________________________________ |
| 2444 | const char* TFluka::VolName(Int_t id) const |
| 2445 | { |
| 2446 | // |
| 2447 | // Returns the volume name for a given volume ID |
| 2448 | // |
| 2449 | return fGeom->VolName(id); |
| 2450 | } |
| 2451 | |
| 2452 | //______________________________________________________________________________ |
| 2453 | Int_t TFluka::VolId(const Text_t* volName) const |
| 2454 | { |
| 2455 | // |
| 2456 | // Converts from volume name to volume ID. |
| 2457 | // Time consuming. (Only used during set-up) |
| 2458 | // Could be replaced by hash-table |
| 2459 | // |
| 2460 | return fGeom->VolId(volName); |
| 2461 | } |
| 2462 | |
| 2463 | //______________________________________________________________________________ |
| 2464 | Int_t TFluka::CurrentVolID(Int_t& copyNo) const |
| 2465 | { |
| 2466 | // |
| 2467 | // Return the logical id and copy number corresponding to the current fluka region |
| 2468 | // |
| 2469 | return fGeom->CurrentVolID(copyNo); |
| 2470 | } |
| 2471 | |
| 2472 | //______________________________________________________________________________ |
| 2473 | Int_t TFluka::CurrentVolOffID(Int_t off, Int_t& copyNo) const |
| 2474 | { |
| 2475 | // |
| 2476 | // Return the logical id and copy number of off'th mother |
| 2477 | // corresponding to the current fluka region |
| 2478 | // |
| 2479 | return fGeom->CurrentVolOffID(off, copyNo); |
| 2480 | } |
| 2481 | |
| 2482 | //______________________________________________________________________________ |
| 2483 | const char* TFluka::CurrentVolName() const |
| 2484 | { |
| 2485 | // |
| 2486 | // Return the current volume name |
| 2487 | // |
| 2488 | return fGeom->CurrentVolName(); |
| 2489 | } |
| 2490 | |
| 2491 | //______________________________________________________________________________ |
| 2492 | const char* TFluka::CurrentVolOffName(Int_t off) const |
| 2493 | { |
| 2494 | // |
| 2495 | // Return the volume name of the off'th mother of the current volume |
| 2496 | // |
| 2497 | return fGeom->CurrentVolOffName(off); |
| 2498 | } |
| 2499 | |
| 2500 | //______________________________________________________________________________ |
| 2501 | Int_t TFluka::CurrentMaterial(Float_t & /*a*/, Float_t & /*z*/, |
| 2502 | Float_t & /*dens*/, Float_t & /*radl*/, Float_t & /*absl*/) const |
| 2503 | { |
| 2504 | // |
| 2505 | // Return the current medium number ??? what about material properties |
| 2506 | // |
| 2507 | Int_t copy; |
| 2508 | Int_t id = TFluka::CurrentVolID(copy); |
| 2509 | Int_t med = TFluka::VolId2Mate(id); |
| 2510 | return med; |
| 2511 | } |
| 2512 | |
| 2513 | //______________________________________________________________________________ |
| 2514 | void TFluka::Gmtod(Float_t* xm, Float_t* xd, Int_t iflag) |
| 2515 | { |
| 2516 | // Transforms a position from the world reference frame |
| 2517 | // to the current volume reference frame. |
| 2518 | // |
| 2519 | // Geant3 desription: |
| 2520 | // ================== |
| 2521 | // Computes coordinates XD (in DRS) |
| 2522 | // from known coordinates XM in MRS |
| 2523 | // The local reference system can be initialized by |
| 2524 | // - the tracking routines and GMTOD used in GUSTEP |
| 2525 | // - a call to GMEDIA(XM,NUMED) |
| 2526 | // - a call to GLVOLU(NLEVEL,NAMES,NUMBER,IER) |
| 2527 | // (inverse routine is GDTOM) |
| 2528 | // |
| 2529 | // If IFLAG=1 convert coordinates |
| 2530 | // IFLAG=2 convert direction cosinus |
| 2531 | // |
| 2532 | // --- |
| 2533 | fGeom->Gmtod(xm,xd,iflag); |
| 2534 | } |
| 2535 | |
| 2536 | //______________________________________________________________________________ |
| 2537 | void TFluka::Gmtod(Double_t* xm, Double_t* xd, Int_t iflag) |
| 2538 | { |
| 2539 | // Transforms a position from the world reference frame |
| 2540 | // to the current volume reference frame. |
| 2541 | // |
| 2542 | // Geant3 desription: |
| 2543 | // ================== |
| 2544 | // Computes coordinates XD (in DRS) |
| 2545 | // from known coordinates XM in MRS |
| 2546 | // The local reference system can be initialized by |
| 2547 | // - the tracking routines and GMTOD used in GUSTEP |
| 2548 | // - a call to GMEDIA(XM,NUMED) |
| 2549 | // - a call to GLVOLU(NLEVEL,NAMES,NUMBER,IER) |
| 2550 | // (inverse routine is GDTOM) |
| 2551 | // |
| 2552 | // If IFLAG=1 convert coordinates |
| 2553 | // IFLAG=2 convert direction cosinus |
| 2554 | // |
| 2555 | // --- |
| 2556 | fGeom->Gmtod(xm,xd,iflag); |
| 2557 | } |
| 2558 | |
| 2559 | //______________________________________________________________________________ |
| 2560 | void TFluka::Gdtom(Float_t* xd, Float_t* xm, Int_t iflag) |
| 2561 | { |
| 2562 | // Transforms a position from the current volume reference frame |
| 2563 | // to the world reference frame. |
| 2564 | // |
| 2565 | // Geant3 desription: |
| 2566 | // ================== |
| 2567 | // Computes coordinates XM (Master Reference System |
| 2568 | // knowing the coordinates XD (Detector Ref System) |
| 2569 | // The local reference system can be initialized by |
| 2570 | // - the tracking routines and GDTOM used in GUSTEP |
| 2571 | // - a call to GSCMED(NLEVEL,NAMES,NUMBER) |
| 2572 | // (inverse routine is GMTOD) |
| 2573 | // |
| 2574 | // If IFLAG=1 convert coordinates |
| 2575 | // IFLAG=2 convert direction cosinus |
| 2576 | // |
| 2577 | // --- |
| 2578 | fGeom->Gdtom(xd,xm,iflag); |
| 2579 | } |
| 2580 | |
| 2581 | //______________________________________________________________________________ |
| 2582 | void TFluka::Gdtom(Double_t* xd, Double_t* xm, Int_t iflag) |
| 2583 | { |
| 2584 | // Transforms a position from the current volume reference frame |
| 2585 | // to the world reference frame. |
| 2586 | // |
| 2587 | // Geant3 desription: |
| 2588 | // ================== |
| 2589 | // Computes coordinates XM (Master Reference System |
| 2590 | // knowing the coordinates XD (Detector Ref System) |
| 2591 | // The local reference system can be initialized by |
| 2592 | // - the tracking routines and GDTOM used in GUSTEP |
| 2593 | // - a call to GSCMED(NLEVEL,NAMES,NUMBER) |
| 2594 | // (inverse routine is GMTOD) |
| 2595 | // |
| 2596 | // If IFLAG=1 convert coordinates |
| 2597 | // IFLAG=2 convert direction cosinus |
| 2598 | // |
| 2599 | // --- |
| 2600 | fGeom->Gdtom(xd,xm,iflag); |
| 2601 | } |
| 2602 | |
| 2603 | // =============================================================== |
| 2604 | void TFluka::FutoTest() |
| 2605 | { |
| 2606 | Int_t icode, mreg, newreg, particleId; |
| 2607 | Double_t rull, xsco, ysco, zsco; |
| 2608 | TLorentzVector position, momentum; |
| 2609 | icode = GetIcode(); |
| 2610 | if (icode == 0) { |
| 2611 | if (fVerbosityLevel >=3) |
| 2612 | cout << " icode=" << icode << endl; |
| 2613 | } else if (icode > 0 && icode <= 5) { |
| 2614 | // mgdraw |
| 2615 | mreg = GetMreg(); |
| 2616 | if (fVerbosityLevel >=3) |
| 2617 | cout << " icode=" << icode |
| 2618 | << " mreg=" << mreg |
| 2619 | << endl; |
| 2620 | TrackPosition(position); |
| 2621 | TrackMomentum(momentum); |
| 2622 | if (fVerbosityLevel >=3) { |
| 2623 | cout << "TLorentzVector positionX=" << position.X() |
| 2624 | << "positionY=" << position.Y() |
| 2625 | << "positionZ=" << position.Z() |
| 2626 | << "timeT=" << position.T() << endl; |
| 2627 | cout << "TLorentzVector momentumX=" << momentum.X() |
| 2628 | << "momentumY=" << momentum.Y() |
| 2629 | << "momentumZ=" << momentum.Z() |
| 2630 | << "energyE=" << momentum.E() << endl; |
| 2631 | cout << "TrackStep=" << TrackStep() << endl; |
| 2632 | cout << "TrackLength=" << TrackLength() << endl; |
| 2633 | cout << "TrackTime=" << TrackTime() << endl; |
| 2634 | cout << "Edep=" << Edep() << endl; |
| 2635 | cout << "TrackPid=" << TrackPid() << endl; |
| 2636 | cout << "TrackCharge=" << TrackCharge() << endl; |
| 2637 | cout << "TrackMass=" << TrackMass() << endl; |
| 2638 | cout << "Etot=" << Etot() << endl; |
| 2639 | cout << "IsNewTrack=" << IsNewTrack() << endl; |
| 2640 | cout << "IsTrackInside=" << IsTrackInside() << endl; |
| 2641 | cout << "IsTrackEntering=" << IsTrackEntering() << endl; |
| 2642 | cout << "IsTrackExiting=" << IsTrackExiting() << endl; |
| 2643 | cout << "IsTrackOut=" << IsTrackOut() << endl; |
| 2644 | cout << "IsTrackDisappeared=" << IsTrackDisappeared() << endl; |
| 2645 | cout << "IsTrackAlive=" << IsTrackAlive() << endl; |
| 2646 | } |
| 2647 | |
| 2648 | Float_t x = position.X(); |
| 2649 | Float_t y = position.Y(); |
| 2650 | Float_t z = position.Z(); |
| 2651 | Float_t xm[3]; |
| 2652 | Float_t xd[3]; |
| 2653 | xm[0] = x; xm[1] = y; xm[2] = z; |
| 2654 | if (fVerbosityLevel >= 3) |
| 2655 | printf("Global trackPosition: %f %f %f \n", x, y, z); |
| 2656 | Gmtod(xm, xd, 1); |
| 2657 | if (fVerbosityLevel >= 3) |
| 2658 | printf("Local trackPosition: %f %f %f \n", xd[0], xd[1], xd[2]); |
| 2659 | Gdtom(xd, xm, 1); |
| 2660 | if (fVerbosityLevel >= 3) |
| 2661 | printf("New trackPosition: %f %f %f \n", xm[0], xm[1], xm[2]); |
| 2662 | } else if((icode >= 10 && icode <= 15) || |
| 2663 | (icode >= 20 && icode <= 24) || |
| 2664 | (icode >= 30 && icode <= 33) || |
| 2665 | (icode >= 40 && icode <= 41) || |
| 2666 | (icode >= 50 && icode <= 52)) { |
| 2667 | // endraw |
| 2668 | mreg = GetMreg(); |
| 2669 | rull = GetRull(); |
| 2670 | xsco = GetXsco(); |
| 2671 | ysco = GetYsco(); |
| 2672 | zsco = GetZsco(); |
| 2673 | |
| 2674 | if (fVerbosityLevel >=3) { |
| 2675 | cout << " icode=" << icode |
| 2676 | << " mreg=" << mreg |
| 2677 | << " rull=" << rull |
| 2678 | << " xsco=" << xsco |
| 2679 | << " ysco=" << ysco |
| 2680 | << " zsco=" << zsco << endl; |
| 2681 | } |
| 2682 | TrackPosition(position); |
| 2683 | TrackMomentum(momentum); |
| 2684 | if (fVerbosityLevel >=3) { |
| 2685 | cout << "Edep=" << Edep() << endl; |
| 2686 | cout << "Etot=" << Etot() << endl; |
| 2687 | cout << "TrackPid=" << TrackPid() << endl; |
| 2688 | cout << "TrackCharge=" << TrackCharge() << endl; |
| 2689 | cout << "TrackMass=" << TrackMass() << endl; |
| 2690 | cout << "IsTrackOut=" << IsTrackOut() << endl; |
| 2691 | cout << "IsTrackDisappeared=" << IsTrackDisappeared() << endl; |
| 2692 | cout << "IsTrackStop=" << IsTrackStop() << endl; |
| 2693 | cout << "IsTrackAlive=" << IsTrackAlive() << endl; |
| 2694 | } |
| 2695 | } else if((icode >= 100 && icode <= 105) || |
| 2696 | (icode == 208) || |
| 2697 | (icode == 210) || |
| 2698 | (icode == 212) || |
| 2699 | (icode >= 214 && icode <= 215) || |
| 2700 | (icode == 217) || |
| 2701 | (icode == 219) || |
| 2702 | (icode == 221) || |
| 2703 | (icode == 225) || |
| 2704 | (icode == 300) || |
| 2705 | (icode == 400)) { |
| 2706 | // usdraw |
| 2707 | mreg = GetMreg(); |
| 2708 | xsco = GetXsco(); |
| 2709 | ysco = GetYsco(); |
| 2710 | zsco = GetZsco(); |
| 2711 | |
| 2712 | if (fVerbosityLevel >=3) { |
| 2713 | cout << " icode=" << icode |
| 2714 | << " mreg=" << mreg |
| 2715 | << " xsco=" << xsco |
| 2716 | << " ysco=" << ysco |
| 2717 | << " zsco=" << zsco << endl; |
| 2718 | cout << "TrackPid=" << TrackPid() << endl; |
| 2719 | cout << "NSecondaries=" << NSecondaries() << endl; |
| 2720 | } |
| 2721 | |
| 2722 | for (Int_t isec=0; isec< NSecondaries(); isec++) { |
| 2723 | TFluka::GetSecondary(isec, particleId, position, momentum); |
| 2724 | if (fVerbosityLevel >=3) { |
| 2725 | cout << "TLorentzVector positionX=" << position.X() |
| 2726 | << "positionY=" << position.Y() |
| 2727 | << "positionZ=" << position.Z() |
| 2728 | << "timeT=" << position.T() << endl; |
| 2729 | cout << "TLorentzVector momentumX=" << momentum.X() |
| 2730 | << "momentumY=" << momentum.Y() |
| 2731 | << "momentumZ=" << momentum.Z() |
| 2732 | << "energyE=" << momentum.E() << endl; |
| 2733 | cout << "TrackPid=" << particleId << endl; |
| 2734 | } |
| 2735 | } |
| 2736 | } else if((icode == 19) || |
| 2737 | (icode == 29) || |
| 2738 | (icode == 39) || |
| 2739 | (icode == 49) || |
| 2740 | (icode == 59)) { |
| 2741 | mreg = GetMreg(); |
| 2742 | newreg = GetNewreg(); |
| 2743 | xsco = GetXsco(); |
| 2744 | ysco = GetYsco(); |
| 2745 | zsco = GetZsco(); |
| 2746 | if (fVerbosityLevel >=3) { |
| 2747 | cout << " icode=" << icode |
| 2748 | << " mreg=" << mreg |
| 2749 | << " newreg=" << newreg |
| 2750 | << " xsco=" << xsco |
| 2751 | << " ysco=" << ysco |
| 2752 | << " zsco=" << zsco << endl; |
| 2753 | } |
| 2754 | } |
| 2755 | } // end of FutoTest |
| 2756 | |
git://git.uio.no / u / mrichter / AliRoot.git / blame