[u/mrichter/AliRoot.git] / TPC / testMC / ConfigLM.C

// One can use the configuration macro in compiled mode by
// root [0] gSystem->Load("libgeant321");
// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
//                   -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
// root [0] .x grun.C(1,"Config.C++")

#if !defined(__CINT__) || defined(__MAKECINT__)
#include <Riostream.h>
#include <TRandom.h>
#include <TSystem.h>
#include <TVirtualMC.h>
#include <TGeant3TGeo.h>
#include "STEER/AliRunLoader.h"
#include "STEER/AliRun.h"
#include "STEER/AliConfig.h"
#include "PYTHIA6/AliDecayerPythia.h"
#include "EVGEN/AliGenCocktail.h"
#include "EVGEN/AliGenHIJINGpara.h"
#include "STEER/AliMagF.h"
#include "STRUCT/AliBODY.h"
#include "STRUCT/AliMAG.h"
#include "STRUCT/AliABSOv3.h"
#include "STRUCT/AliDIPOv3.h"
#include "STRUCT/AliHALLv3.h"
#include "STRUCT/AliFRAMEv2.h"
#include "STRUCT/AliSHILv3.h"
#include "STRUCT/AliPIPEv3.h"
#include "ITS/AliITSvPPRasymmFMD.h"
#include "TPC/AliTPCv2.h"
#include "TOF/AliTOFv6T0.h"
#include "HMPID/AliHMPIDv2.h"
#include "ZDC/AliZDCv2.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv1.h"
#include "MUON/AliMUONv1.h"
#include "PHOS/AliPHOSv1.h"
#include "PMD/AliPMDv1.h"
#include "T0/AliT0v1.h"
#include "EMCAL/AliEMCALv2.h"
#include "ACORDE/AliACORDEv0.h"
#include "VZERO/AliVZEROv7.h"
#endif

Float_t EtaToTheta(Float_t arg);

void Config()
{
    // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
    // Theta range given through pseudorapidity limits 22/6/2001

    // Set Random Number seed
  gRandom->SetSeed(0); // Set 0 to use the currecnt time
  AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);


   // libraries required by geant321
#if defined(__CINT__)
    gSystem->Load("libgeant321");
#endif

    new     TGeant3TGeo("C++ Interface to Geant3");

    if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
      AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT/OCDB");
      AliCDBManager::Instance()->SetRun(0);
    }

    AliRunLoader* rl=0x0;

    AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);

    rl = AliRunLoader::Open("galice.root",
			    AliConfig::GetDefaultEventFolderName(),
			    "recreate");
    if (rl == 0x0)
      {
	gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
	return;
      }
    rl->SetCompressionLevel(2);
    rl->SetNumberOfEventsPerFile(3);
    gAlice->SetRunLoader(rl);
    // gAlice->SetGeometryFromFile("geometry.root");
    // gAlice->SetGeometryFromCDB();

    // Set the trigger configuration
    AliSimulation::Instance()->SetTriggerConfig("Pb-Pb");
    cout<<"Trigger configuration is set to  Pb-Pb"<<endl;

    //
    // Set External decayer
    TVirtualMCDecayer *decayer = new AliDecayerPythia();

    decayer->SetForceDecay(kAll);
    decayer->Init();
    gMC->SetExternalDecayer(decayer);
    //=======================================================================
    // ************* STEERING parameters FOR ALICE SIMULATION **************
    // --- Specify event type to be tracked through the ALICE setup
    // --- All positions are in cm, angles in degrees, and P and E in GeV


    gMC->SetProcess("DCAY",1);
    gMC->SetProcess("PAIR",1);
    gMC->SetProcess("COMP",1);
    gMC->SetProcess("PHOT",1);
    gMC->SetProcess("PFIS",0);
    gMC->SetProcess("DRAY",0);
    gMC->SetProcess("ANNI",1);
    gMC->SetProcess("BREM",1);
    gMC->SetProcess("MUNU",1);
    gMC->SetProcess("CKOV",1);
    gMC->SetProcess("HADR",1);
    gMC->SetProcess("LOSS",2);
    gMC->SetProcess("MULS",1);
    gMC->SetProcess("RAYL",1);

    Float_t cut = 1.e-3;        // 1MeV cut by default
    Float_t tofmax = 1.e10;

    gMC->SetCut("CUTGAM", cut);
    gMC->SetCut("CUTELE", cut);
    gMC->SetCut("CUTNEU", cut);
    gMC->SetCut("CUTHAD", cut);
    gMC->SetCut("CUTMUO", cut);
    gMC->SetCut("BCUTE",  cut); 
    gMC->SetCut("BCUTM",  cut); 
    gMC->SetCut("DCUTE",  cut); 
    gMC->SetCut("DCUTM",  cut); 
    gMC->SetCut("PPCUTM", cut);
    gMC->SetCut("TOFMAX", tofmax); 


    int     nParticles = 400;
    if (gSystem->Getenv("CONFIG_NPARTICLES"))
    {
        nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
    }


    AliGenCocktail *gener = new AliGenCocktail();
    gener->SetPhiRange(0, 360);
    // Set pseudorapidity range from -8 to 8.
    Float_t thmin = EtaToTheta(3);   // theta min. <---> eta max
    Float_t thmax = EtaToTheta(-3);  // theta max. <---> eta min 
    gener->SetThetaRange(thmin,thmax);
    gener->SetOrigin(0, 0, 0);  //vertex position
    gener->SetSigma(0, 0, 0);   //Sigma in (X,Y,Z) (cm) on IP position

    AliGenHIJINGpara *hijingparam = new AliGenHIJINGpara(nParticles);
    hijingparam->SetMomentumRange(0.2, 999);
    gener->AddGenerator(hijingparam,"HIJING PARAM",1);
    //
    //
    //PIONS
    Int_t nParticles2 =1;
    AliGenBox *genboxPIP = new AliGenBox(nParticles2);
    genboxPIP->SetPart(211);
    genboxPIP->SetPtRange(0.2, 100.00);
    AliGenBox *genboxPIM = new AliGenBox(nParticles2);
    genboxPIM->SetPart(-211);
    genboxPIM->SetPtRange(0.2, 100.00);
    //Electrons
    AliGenBox *genboxEP = new AliGenBox(nParticles2);
    genboxEP->SetPart(11);
    genboxEP->SetPtRange(0.1, 100.00);
    AliGenBox *genboxEM = new AliGenBox(nParticles2);
    genboxEM->SetPart(-11);
    genboxEM->SetPtRange(0.1, 100.00);
    //Kaons
    AliGenBox *genboxKP = new AliGenBox(nParticles2);
    genboxKP->SetPart(321);
    genboxKP->SetPtRange(0.2, 100.00);
    AliGenBox *genboxKM = new AliGenBox(nParticles2);
    genboxKM->SetPart(-321);
    genboxKM->SetPtRange(0.2, 100.00);
    // mu
    AliGenBox *genboxMP = new AliGenBox(nParticles2);
    genboxMP->SetPart(13);
    genboxMP->SetPtRange(0.2, 100.00);
    AliGenBox *genboxMM = new AliGenBox(nParticles2);
    genboxMM->SetPart(-13);
    genboxMM->SetPtRange(0.2, 100.00);
    // Protons
    AliGenBox *genboxPP = new AliGenBox(nParticles2);
    genboxPP->SetPart(2212);
    genboxPP->SetPtRange(0.2, 100.00);
    AliGenBox *genboxPM = new AliGenBox(nParticles2);
    genboxPM->SetPart(-2212);
    genboxPM->SetPtRange(0.2, 100.00);

 
    gener->AddGenerator(genboxPIP,"GENBOX",1);
    gener->AddGenerator(genboxPIM,"GENBOX",1);
    gener->AddGenerator(genboxEM,"GENBOX",1);
    gener->AddGenerator(genboxEP,"GENBOX",1);
    gener->AddGenerator(genboxKM,"GENBOX",1);
    gener->AddGenerator(genboxKP,"GENBOX",1);
    gener->AddGenerator(genboxMM,"GENBOX",1);
    gener->AddGenerator(genboxMP,"GENBOX",1);
    gener->AddGenerator(genboxPM,"GENBOX",1);
    gener->AddGenerator(genboxPP,"GENBOX",1);

    gener->Init();


    // 
    // Activate this line if you want the vertex smearing to happen
    // track by track
    //
    //gener->SetVertexSmear(perTrack); 
    // Field (L3 0.4 T)
    TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", 1., 1., AliMagF::k5kG));
    gAlice->SetField(field);    


    Int_t   iABSO  =  1;
    Int_t   iDIPO  =  1;
    Int_t   iFMD   =  1;
    Int_t   iFRAME =  1;
    Int_t   iHALL  =  1;
    Int_t   iITS   =  1;
    Int_t   iMAG   =  1;
    Int_t   iMUON  =  1;
    Int_t   iPHOS  =  1;
    Int_t   iPIPE  =  1;
    Int_t   iPMD   =  1;
    Int_t   iHMPID  =  1;
    Int_t   iSHIL  =  1;
    Int_t   iT0 =  1;
    Int_t   iTOF   =  1;
    Int_t   iTPC   =  1;
    Int_t   iTRD   =  1;
    Int_t   iZDC   =  1;
    Int_t   iEMCAL =  1;
    Int_t   iACORDE   =  0;
    Int_t   iVZERO =  1;
    rl->CdGAFile();
    //=================== Alice BODY parameters =============================
    AliBODY *BODY = new AliBODY("BODY", "Alice envelop");

    if (iMAG)
    {
        //=================== MAG parameters ============================
        // --- Start with Magnet since detector layouts may be depending ---
        // --- on the selected Magnet dimensions ---
        AliMAG *MAG = new AliMAG("MAG", "Magnet");
    }


    if (iABSO)
    {
        //=================== ABSO parameters ============================
        AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
    }

    if (iDIPO)
    {
        //=================== DIPO parameters ============================

        AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
    }

    if (iHALL)
    {
        //=================== HALL parameters ============================

        AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
    }


    if (iFRAME)
    {
        //=================== FRAME parameters ============================

        AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
    }

    if (iSHIL)
    {
        //=================== SHIL parameters ============================

        AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
    }


    if (iPIPE)
    {
        //=================== PIPE parameters ============================

        AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
    }
 
    if (iITS)
    {
        //=================== ITS parameters ============================
	AliITSvPPRasymmFMD *ITS  = new AliITSvPPRasymmFMD("ITS",
			   "ITS PPR detailed version with asymmetric services");
    }

    if (iTPC)
    {
        //============================ TPC parameters ===================
        AliTPC *TPC = new AliTPCv2("TPC", "Default");
    }


    if (iTOF) {
        //=================== TOF parameters ============================
	AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
    }


    if (iHMPID)
    {
        //=================== HMPID parameters ===========================
        AliHMPID *HMPID = new AliHMPIDv2("HMPID", "normal HMPID");

    }


    if (iZDC)
    {
        //=================== ZDC parameters ============================

        AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
    }

    if (iTRD)
    {
        //=================== TRD parameters ============================

        AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
    }

    if (iFMD)
    {
        //=================== FMD parameters ============================
	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
   }

    if (iMUON)
    {
        //=================== MUON parameters ===========================
        // New MUONv1 version (geometry defined via builders)
        AliMUON *MUON = new AliMUONv1("MUON", "default");
    }
    //=================== PHOS parameters ===========================

    if (iPHOS)
    {
        AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
    }


    if (iPMD)
    {
        //=================== PMD parameters ============================
        AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
    }

    if (iT0)
    {
        //=================== T0 parameters ============================
        AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
    }

    if (iEMCAL)
    {
        //=================== EMCAL parameters ============================
        AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
    }

     if (iACORDE)
    {
        //=================== ACORDE parameters ============================
        AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
    }

     if (iVZERO)
    {
        //=================== ACORDE parameters ============================
        AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
    }

     AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);

}

Float_t EtaToTheta(Float_t arg){
  return (180./TMath::Pi())*2.*atan(exp(-arg));
}
Commit	Line	Data
75c56124	1	// One can use the configuration macro in compiled mode by
	2	// root [0] gSystem->Load("libgeant321");
	3	// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
	4	// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
	5	// root [0] .x grun.C(1,"Config.C++")
	6
	7	#if !defined(__CINT__) \|\| defined(__MAKECINT__)
	8	#include <Riostream.h>
	9	#include <TRandom.h>
	10	#include <TSystem.h>
	11	#include <TVirtualMC.h>
	12	#include <TGeant3TGeo.h>
	13	#include "STEER/AliRunLoader.h"
	14	#include "STEER/AliRun.h"
	15	#include "STEER/AliConfig.h"
	16	#include "PYTHIA6/AliDecayerPythia.h"
	17	#include "EVGEN/AliGenCocktail.h"
	18	#include "EVGEN/AliGenHIJINGpara.h"
f7a1cc68	19	#include "STEER/AliMagF.h"
75c56124	20	#include "STRUCT/AliBODY.h"
	21	#include "STRUCT/AliMAG.h"
	22	#include "STRUCT/AliABSOv3.h"
	23	#include "STRUCT/AliDIPOv3.h"
	24	#include "STRUCT/AliHALLv3.h"
	25	#include "STRUCT/AliFRAMEv2.h"
	26	#include "STRUCT/AliSHILv3.h"
	27	#include "STRUCT/AliPIPEv3.h"
	28	#include "ITS/AliITSvPPRasymmFMD.h"
	29	#include "TPC/AliTPCv2.h"
	30	#include "TOF/AliTOFv6T0.h"
	31	#include "HMPID/AliHMPIDv2.h"
	32	#include "ZDC/AliZDCv2.h"
	33	#include "TRD/AliTRDv1.h"
	34	#include "FMD/AliFMDv1.h"
	35	#include "MUON/AliMUONv1.h"
	36	#include "PHOS/AliPHOSv1.h"
	37	#include "PMD/AliPMDv1.h"
	38	#include "T0/AliT0v1.h"
	39	#include "EMCAL/AliEMCALv2.h"
	40	#include "ACORDE/AliACORDEv0.h"
	41	#include "VZERO/AliVZEROv7.h"
	42	#endif
	43
	44	Float_t EtaToTheta(Float_t arg);
	45
	46	void Config()
	47	{
	48	// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
	49	// Theta range given through pseudorapidity limits 22/6/2001
	50
	51	// Set Random Number seed
	52	gRandom->SetSeed(0); // Set 0 to use the currecnt time
	53	AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);
	54
	55
	56	// libraries required by geant321
	57	#if defined(__CINT__)
	58	gSystem->Load("libgeant321");
	59	#endif
	60
	61	new TGeant3TGeo("C++ Interface to Geant3");
	62
	63	if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
162637e4	64	AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT/OCDB");
75c56124	65	AliCDBManager::Instance()->SetRun(0);
	66	}
	67
	68	AliRunLoader* rl=0x0;
	69
	70	AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
	71
	72	rl = AliRunLoader::Open("galice.root",
	73	AliConfig::GetDefaultEventFolderName(),
	74	"recreate");
	75	if (rl == 0x0)
	76	{
	77	gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
	78	return;
	79	}
	80	rl->SetCompressionLevel(2);
	81	rl->SetNumberOfEventsPerFile(3);
	82	gAlice->SetRunLoader(rl);
	83	// gAlice->SetGeometryFromFile("geometry.root");
	84	// gAlice->SetGeometryFromCDB();
	85
	86	// Set the trigger configuration
28da60d3	87	AliSimulation::Instance()->SetTriggerConfig("Pb-Pb");
75c56124	88	cout<<"Trigger configuration is set to Pb-Pb"<<endl;
	89
	90	//
	91	// Set External decayer
	92	TVirtualMCDecayer *decayer = new AliDecayerPythia();
	93
	94	decayer->SetForceDecay(kAll);
	95	decayer->Init();
	96	gMC->SetExternalDecayer(decayer);
	97	//=======================================================================
	98	// *********** STEERING parameters FOR ALICE SIMULATION ************
	99	// --- Specify event type to be tracked through the ALICE setup
	100	// --- All positions are in cm, angles in degrees, and P and E in GeV
	101
	102
	103	gMC->SetProcess("DCAY",1);
	104	gMC->SetProcess("PAIR",1);
	105	gMC->SetProcess("COMP",1);
	106	gMC->SetProcess("PHOT",1);
	107	gMC->SetProcess("PFIS",0);
	108	gMC->SetProcess("DRAY",0);
	109	gMC->SetProcess("ANNI",1);
	110	gMC->SetProcess("BREM",1);
	111	gMC->SetProcess("MUNU",1);
	112	gMC->SetProcess("CKOV",1);
	113	gMC->SetProcess("HADR",1);
	114	gMC->SetProcess("LOSS",2);
	115	gMC->SetProcess("MULS",1);
	116	gMC->SetProcess("RAYL",1);
	117
	118	Float_t cut = 1.e-3; // 1MeV cut by default
	119	Float_t tofmax = 1.e10;
	120
	121	gMC->SetCut("CUTGAM", cut);
	122	gMC->SetCut("CUTELE", cut);
	123	gMC->SetCut("CUTNEU", cut);
	124	gMC->SetCut("CUTHAD", cut);
	125	gMC->SetCut("CUTMUO", cut);
	126	gMC->SetCut("BCUTE", cut);
	127	gMC->SetCut("BCUTM", cut);
	128	gMC->SetCut("DCUTE", cut);
	129	gMC->SetCut("DCUTM", cut);
	130	gMC->SetCut("PPCUTM", cut);
	131	gMC->SetCut("TOFMAX", tofmax);
	132
	133
	134	int nParticles = 400;
	135	if (gSystem->Getenv("CONFIG_NPARTICLES"))
	136	{
	137	nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
	138	}
	139
	140
	141	AliGenCocktail *gener = new AliGenCocktail();
	142	gener->SetPhiRange(0, 360);
	143	// Set pseudorapidity range from -8 to 8.
	144	Float_t thmin = EtaToTheta(3); // theta min. <---> eta max
	145	Float_t thmax = EtaToTheta(-3); // theta max. <---> eta min
	146	gener->SetThetaRange(thmin,thmax);
	147	gener->SetOrigin(0, 0, 0); //vertex position
	148	gener->SetSigma(0, 0, 0); //Sigma in (X,Y,Z) (cm) on IP position
	149
	150	AliGenHIJINGpara *hijingparam = new AliGenHIJINGpara(nParticles);
	151	hijingparam->SetMomentumRange(0.2, 999);
152	gener->AddGenerator(hijingparam,"HIJING PARAM",1);
153	//
154	//
155	//PIONS
156	Int_t nParticles2 =1;
157	AliGenBox *genboxPIP = new AliGenBox(nParticles2);
158	genboxPIP->SetPart(211);
159	genboxPIP->SetPtRange(0.2, 100.00);
160	AliGenBox *genboxPIM = new AliGenBox(nParticles2);
161	genboxPIM->SetPart(-211);
162	genboxPIM->SetPtRange(0.2, 100.00);
163	//Electrons
164	AliGenBox *genboxEP = new AliGenBox(nParticles2);
165	genboxEP->SetPart(11);
166	genboxEP->SetPtRange(0.1, 100.00);
167	AliGenBox *genboxEM = new AliGenBox(nParticles2);
168	genboxEM->SetPart(-11);
169	genboxEM->SetPtRange(0.1, 100.00);
170	//Kaons
171	AliGenBox *genboxKP = new AliGenBox(nParticles2);
172	genboxKP->SetPart(321);
173	genboxKP->SetPtRange(0.2, 100.00);
174	AliGenBox *genboxKM = new AliGenBox(nParticles2);
175	genboxKM->SetPart(-321);
176	genboxKM->SetPtRange(0.2, 100.00);
177	// mu
178	AliGenBox *genboxMP = new AliGenBox(nParticles2);
179	genboxMP->SetPart(13);
180	genboxMP->SetPtRange(0.2, 100.00);
181	AliGenBox *genboxMM = new AliGenBox(nParticles2);
182	genboxMM->SetPart(-13);
183	genboxMM->SetPtRange(0.2, 100.00);
184	// Protons
185	AliGenBox *genboxPP = new AliGenBox(nParticles2);
186	genboxPP->SetPart(2212);
187	genboxPP->SetPtRange(0.2, 100.00);
188	AliGenBox *genboxPM = new AliGenBox(nParticles2);
189	genboxPM->SetPart(-2212);
190	genboxPM->SetPtRange(0.2, 100.00);
191
192
193
194	gener->AddGenerator(genboxPIP,"GENBOX",1);
195	gener->AddGenerator(genboxPIM,"GENBOX",1);
196	gener->AddGenerator(genboxEM,"GENBOX",1);
197	gener->AddGenerator(genboxEP,"GENBOX",1);
198	gener->AddGenerator(genboxKM,"GENBOX",1);
199	gener->AddGenerator(genboxKP,"GENBOX",1);
200	gener->AddGenerator(genboxMM,"GENBOX",1);
201	gener->AddGenerator(genboxMP,"GENBOX",1);
202	gener->AddGenerator(genboxPM,"GENBOX",1);
203	gener->AddGenerator(genboxPP,"GENBOX",1);
204
205	gener->Init();
206
207
208
209	//
210	// Activate this line if you want the vertex smearing to happen
211	// track by track
212	//
213	//gener->SetVertexSmear(perTrack);
214	// Field (L3 0.4 T)
4642ac4b	215	TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", 1., 1., AliMagF::k5kG));
75c56124	216	gAlice->SetField(field);
	217
	218
	219	Int_t iABSO = 1;
	220	Int_t iDIPO = 1;
	221	Int_t iFMD = 1;
	222	Int_t iFRAME = 1;
	223	Int_t iHALL = 1;
	224	Int_t iITS = 1;
	225	Int_t iMAG = 1;
	226	Int_t iMUON = 1;
	227	Int_t iPHOS = 1;
	228	Int_t iPIPE = 1;
	229	Int_t iPMD = 1;
	230	Int_t iHMPID = 1;
	231	Int_t iSHIL = 1;
	232	Int_t iT0 = 1;
	233	Int_t iTOF = 1;
	234	Int_t iTPC = 1;
	235	Int_t iTRD = 1;
	236	Int_t iZDC = 1;
	237	Int_t iEMCAL = 1;
	238	Int_t iACORDE = 0;
	239	Int_t iVZERO = 1;
	240	rl->CdGAFile();
	241	//=================== Alice BODY parameters =============================
	242	AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
	243
	244	if (iMAG)
	245	{
	246	//=================== MAG parameters ============================
	247	// --- Start with Magnet since detector layouts may be depending ---
	248	// --- on the selected Magnet dimensions ---
	249	AliMAG *MAG = new AliMAG("MAG", "Magnet");
	250	}
	251
	252
	253	if (iABSO)
	254	{
	255	//=================== ABSO parameters ============================
	256	AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
	257	}
	258
	259	if (iDIPO)
	260	{
	261	//=================== DIPO parameters ============================
	262
	263	AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
	264	}
	265
	266	if (iHALL)
	267	{
	268	//=================== HALL parameters ============================
	269
	270	AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
	271	}
	272
	273
	274	if (iFRAME)
	275	{
	276	//=================== FRAME parameters ============================
	277
	278	AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
	279	}
280
281	if (iSHIL)
282	{
283	//=================== SHIL parameters ============================
284
285	AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
286	}
287
288
289	if (iPIPE)
290	{
291	//=================== PIPE parameters ============================
292
293	AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
294	}
295
296	if (iITS)
297	{
298	//=================== ITS parameters ============================
299	AliITSvPPRasymmFMD *ITS = new AliITSvPPRasymmFMD("ITS",
300	"ITS PPR detailed version with asymmetric services");
301	}
302
303	if (iTPC)
304	{
305	//============================ TPC parameters ===================
306	AliTPC *TPC = new AliTPCv2("TPC", "Default");
307	}
308
309
310	if (iTOF) {
311	//=================== TOF parameters ============================
312	AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
313	}
314
315
316	if (iHMPID)
317	{
318	//=================== HMPID parameters ===========================
319	AliHMPID *HMPID = new AliHMPIDv2("HMPID", "normal HMPID");
320
321	}
322
323
324	if (iZDC)
325	{
326	//=================== ZDC parameters ============================
327
328	AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
329	}
330
331	if (iTRD)
332	{
333	//=================== TRD parameters ============================
334
335	AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
336	}
337
338	if (iFMD)
339	{
340	//=================== FMD parameters ============================
341	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
342	}
343
344	if (iMUON)
345	{
346	//=================== MUON parameters ===========================
347	// New MUONv1 version (geometry defined via builders)
348	AliMUON *MUON = new AliMUONv1("MUON", "default");
349	}
350	//=================== PHOS parameters ===========================
351
352	if (iPHOS)
353	{
354	AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
355	}
356
357
358	if (iPMD)
359	{
360	//=================== PMD parameters ============================
361	AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
362	}
363
364	if (iT0)
365	{
366	//=================== T0 parameters ============================
367	AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
368	}
369
370	if (iEMCAL)
371	{
372	//=================== EMCAL parameters ============================
373	AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
374	}
375
376	if (iACORDE)
377	{
378	//=================== ACORDE parameters ============================
379	AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
380	}
381
382	if (iVZERO)
383	{
384	//=================== ACORDE parameters ============================
385	AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
386	}
387
388	AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
389
390	}
391
392	Float_t EtaToTheta(Float_t arg){
393	return (180./TMath::Pi())2.atan(exp(-arg));
394	}