]>
Commit | Line | Data |
---|---|---|
f7336fa3 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
afc51ac2 | 16 | /* $Id$ */ |
f7336fa3 | 17 | |
18 | /////////////////////////////////////////////////////////////////////////////// | |
19 | // // | |
20 | // TRD geometry class // | |
21 | // // | |
22 | /////////////////////////////////////////////////////////////////////////////// | |
23 | ||
793ff80c | 24 | |
b4a9cd27 | 25 | #include <TGeoManager.h> |
26 | #include <TGeoPhysicalNode.h> | |
27 | #include <TGeoMatrix.h> | |
28 | ||
2745a409 | 29 | #include "AliLog.h" |
bdbb05bb | 30 | #include "AliRunLoader.h" |
b4a9cd27 | 31 | #include "AliAlignObj.h" |
32 | #include "AliAlignObjAngles.h" | |
ecb36af7 | 33 | #include "AliRun.h" |
030b4415 | 34 | |
ecb36af7 | 35 | #include "AliTRD.h" |
3551db50 | 36 | #include "AliTRDcalibDB.h" |
37 | #include "AliTRDCommonParam.h" | |
2745a409 | 38 | #include "AliTRDgeometry.h" |
39 | #include "AliTRDpadPlane.h" | |
ecb36af7 | 40 | |
f7336fa3 | 41 | ClassImp(AliTRDgeometry) |
42 | ||
793ff80c | 43 | //_____________________________________________________________________________ |
44 | ||
45 | // | |
46 | // The geometry constants | |
47 | // | |
48 | const Int_t AliTRDgeometry::fgkNsect = kNsect; | |
49 | const Int_t AliTRDgeometry::fgkNplan = kNplan; | |
50 | const Int_t AliTRDgeometry::fgkNcham = kNcham; | |
51 | const Int_t AliTRDgeometry::fgkNdet = kNdet; | |
52 | ||
53 | // | |
54 | // Dimensions of the detector | |
55 | // | |
0a770ac9 | 56 | |
0a5f3331 | 57 | // Parameter of the BTRD mother volumes |
a797f961 | 58 | const Float_t AliTRDgeometry::fgkSheight = 77.9; |
59 | const Float_t AliTRDgeometry::fgkSwidth1 = 94.881; | |
60 | const Float_t AliTRDgeometry::fgkSwidth2 = 122.353; | |
0a5f3331 | 61 | const Float_t AliTRDgeometry::fgkSlength = 751.0; |
793ff80c | 62 | |
73ae7b59 | 63 | // The super module side plates |
287c5d50 | 64 | const Float_t AliTRDgeometry::fgkSMpltT = 0.2; |
73ae7b59 | 65 | |
0a770ac9 | 66 | // Height of different chamber parts |
67 | // Radiator | |
68 | const Float_t AliTRDgeometry::fgkCraH = 4.8; | |
69 | // Drift region | |
70 | const Float_t AliTRDgeometry::fgkCdrH = 3.0; | |
71 | // Amplification region | |
72 | const Float_t AliTRDgeometry::fgkCamH = 0.7; | |
73 | // Readout | |
73ae7b59 | 74 | const Float_t AliTRDgeometry::fgkCroH = 2.316; |
0a770ac9 | 75 | // Total height |
76 | const Float_t AliTRDgeometry::fgkCH = AliTRDgeometry::fgkCraH | |
77 | + AliTRDgeometry::fgkCdrH | |
78 | + AliTRDgeometry::fgkCamH | |
79 | + AliTRDgeometry::fgkCroH; | |
80 | ||
81 | // Vertical spacing of the chambers | |
73ae7b59 | 82 | const Float_t AliTRDgeometry::fgkVspace = 1.784; |
0a770ac9 | 83 | // Horizontal spacing of the chambers |
84 | const Float_t AliTRDgeometry::fgkHspace = 2.0; | |
a797f961 | 85 | // Radial distance of the first ROC to the outer plates of the SM |
86 | const Float_t AliTRDgeometry::fgkVrocsm = 1.2; | |
87 | ||
0a770ac9 | 88 | // Thicknesses of different parts of the chamber frame |
89 | // Lower aluminum frame | |
0a5f3331 | 90 | const Float_t AliTRDgeometry::fgkCalT = 0.4; |
91 | // Lower Wacosit frame sides | |
92 | const Float_t AliTRDgeometry::fgkCclsT = 0.21; | |
93 | // Lower Wacosit frame front | |
0a770ac9 | 94 | const Float_t AliTRDgeometry::fgkCclfT = 1.0; |
0a5f3331 | 95 | // Thickness of glue around radiator |
96 | const Float_t AliTRDgeometry::fgkCglT = 0.25; | |
97 | // Upper Wacosit frame | |
0a770ac9 | 98 | const Float_t AliTRDgeometry::fgkCcuT = 0.9; |
0a5f3331 | 99 | // Al frame of back panel |
0a770ac9 | 100 | const Float_t AliTRDgeometry::fgkCauT = 1.5; |
0a5f3331 | 101 | // Additional Al of the lower chamber frame |
102 | const Float_t AliTRDgeometry::fgkCalW = 1.11; | |
0a770ac9 | 103 | |
104 | // Additional width of the readout chamber frames | |
105 | const Float_t AliTRDgeometry::fgkCroW = 0.9; | |
106 | ||
107 | // Difference of outer chamber width and pad plane width | |
73ae7b59 | 108 | const Float_t AliTRDgeometry::fgkCpadW = 0.0; |
de6df1b1 | 109 | const Float_t AliTRDgeometry::fgkRpadW = 1.0; |
793ff80c | 110 | |
111 | // | |
112 | // Thickness of the the material layers | |
113 | // | |
793ff80c | 114 | const Float_t AliTRDgeometry::fgkMyThick = 0.005; |
0a5f3331 | 115 | const Float_t AliTRDgeometry::fgkRaThick = 0.3233; |
0a770ac9 | 116 | const Float_t AliTRDgeometry::fgkDrThick = AliTRDgeometry::fgkCdrH; |
117 | const Float_t AliTRDgeometry::fgkAmThick = AliTRDgeometry::fgkCamH; | |
118 | const Float_t AliTRDgeometry::fgkXeThick = AliTRDgeometry::fgkDrThick | |
119 | + AliTRDgeometry::fgkAmThick; | |
0a5f3331 | 120 | const Float_t AliTRDgeometry::fgkWrThick = 0.0002; |
a797f961 | 121 | const Float_t AliTRDgeometry::fgkCuThick = 0.0072; |
0a5f3331 | 122 | const Float_t AliTRDgeometry::fgkGlThick = 0.05; |
123 | const Float_t AliTRDgeometry::fgkSuThick = 0.0919; | |
a797f961 | 124 | const Float_t AliTRDgeometry::fgkRcThick = 0.0058; |
125 | const Float_t AliTRDgeometry::fgkRpThick = 0.0632; | |
0a5f3331 | 126 | const Float_t AliTRDgeometry::fgkRoThick = 0.0028; |
793ff80c | 127 | |
128 | // | |
129 | // Position of the material layers | |
130 | // | |
0a5f3331 | 131 | //const Float_t AliTRDgeometry::fgkRaZpos = -1.50; |
132 | const Float_t AliTRDgeometry::fgkRaZpos = 0.0; | |
0a770ac9 | 133 | const Float_t AliTRDgeometry::fgkDrZpos = 2.4; |
134 | const Float_t AliTRDgeometry::fgkAmZpos = 0.0; | |
0a5f3331 | 135 | const Float_t AliTRDgeometry::fgkWrZpos = 0.0; |
0a770ac9 | 136 | const Float_t AliTRDgeometry::fgkCuZpos = -0.9995; |
0a5f3331 | 137 | const Float_t AliTRDgeometry::fgkGlZpos = -0.5; |
138 | const Float_t AliTRDgeometry::fgkSuZpos = 0.0; | |
a797f961 | 139 | const Float_t AliTRDgeometry::fgkRcZpos = 1.04; |
140 | const Float_t AliTRDgeometry::fgkRpZpos = 1.0; | |
0a5f3331 | 141 | const Float_t AliTRDgeometry::fgkRoZpos = 1.05; |
142 | ||
143 | const Double_t AliTRDgeometry::fgkTime0Base = 300.65; | |
3551db50 | 144 | const Float_t AliTRDgeometry::fgkTime0[6] = { fgkTime0Base + 0 * (Cheight() + Cspace()), |
145 | fgkTime0Base + 1 * (Cheight() + Cspace()), | |
146 | fgkTime0Base + 2 * (Cheight() + Cspace()), | |
147 | fgkTime0Base + 3 * (Cheight() + Cspace()), | |
148 | fgkTime0Base + 4 * (Cheight() + Cspace()), | |
149 | fgkTime0Base + 5 * (Cheight() + Cspace()) }; | |
793ff80c | 150 | |
f7336fa3 | 151 | //_____________________________________________________________________________ |
2745a409 | 152 | AliTRDgeometry::AliTRDgeometry() |
153 | :AliGeometry() | |
154 | ,fMatrixArray(0) | |
155 | ,fMatrixCorrectionArray(0) | |
156 | ,fMatrixGeo(0) | |
157 | ||
f7336fa3 | 158 | { |
159 | // | |
160 | // AliTRDgeometry default constructor | |
161 | // | |
bd0f8685 | 162 | |
2745a409 | 163 | Init(); |
164 | ||
165 | } | |
166 | ||
167 | //_____________________________________________________________________________ | |
168 | AliTRDgeometry::AliTRDgeometry(const AliTRDgeometry &g) | |
169 | :AliGeometry(g) | |
030b4415 | 170 | ,fMatrixArray(g.fMatrixArray) |
171 | ,fMatrixCorrectionArray(g.fMatrixCorrectionArray) | |
172 | ,fMatrixGeo(g.fMatrixGeo) | |
2745a409 | 173 | { |
174 | // | |
175 | // AliTRDgeometry copy constructor | |
176 | // | |
bd0f8685 | 177 | |
f7336fa3 | 178 | Init(); |
bd0f8685 | 179 | |
f7336fa3 | 180 | } |
181 | ||
182 | //_____________________________________________________________________________ | |
183 | AliTRDgeometry::~AliTRDgeometry() | |
184 | { | |
8230f242 | 185 | // |
186 | // AliTRDgeometry destructor | |
187 | // | |
bd0f8685 | 188 | |
030b4415 | 189 | if (fMatrixArray) { |
190 | delete fMatrixArray; | |
191 | fMatrixArray = 0; | |
192 | } | |
193 | ||
194 | if (fMatrixCorrectionArray) { | |
195 | delete fMatrixCorrectionArray; | |
196 | fMatrixCorrectionArray = 0; | |
197 | } | |
bd0f8685 | 198 | |
f7336fa3 | 199 | } |
200 | ||
2745a409 | 201 | //_____________________________________________________________________________ |
202 | AliTRDgeometry &AliTRDgeometry::operator=(const AliTRDgeometry &g) | |
203 | { | |
204 | // | |
205 | // Assignment operator | |
206 | // | |
207 | ||
0a5f3331 | 208 | if (this != &g) { |
209 | Init(); | |
210 | } | |
030b4415 | 211 | |
2745a409 | 212 | return *this; |
213 | ||
214 | } | |
215 | ||
f7336fa3 | 216 | //_____________________________________________________________________________ |
217 | void AliTRDgeometry::Init() | |
218 | { | |
219 | // | |
220 | // Initializes the geometry parameter | |
221 | // | |
f7336fa3 | 222 | |
0a770ac9 | 223 | Int_t icham; |
224 | Int_t iplan; | |
225 | Int_t isect; | |
226 | ||
227 | // The outer width of the chambers | |
287c5d50 | 228 | fCwidth[0] = 90.4; |
e0d47c25 | 229 | fCwidth[1] = 94.8; |
230 | fCwidth[2] = 99.3; | |
231 | fCwidth[3] = 103.7; | |
232 | fCwidth[4] = 108.1; | |
233 | fCwidth[5] = 112.6; | |
0a770ac9 | 234 | |
235 | // The outer lengths of the chambers | |
73ae7b59 | 236 | // Includes the spacings between the chambers! |
8737e16f | 237 | Float_t length[kNplan][kNcham] = { { 124.0, 124.0, 110.0, 124.0, 124.0 } |
e0d47c25 | 238 | , { 124.0, 124.0, 110.0, 124.0, 124.0 } |
8737e16f | 239 | , { 131.0, 131.0, 110.0, 131.0, 131.0 } |
240 | , { 138.0, 138.0, 110.0, 138.0, 138.0 } | |
241 | , { 145.0, 145.0, 110.0, 145.0, 145.0 } | |
e0d47c25 | 242 | , { 147.0, 147.0, 110.0, 147.0, 147.0 } }; |
0a770ac9 | 243 | |
244 | for (icham = 0; icham < kNcham; icham++) { | |
245 | for (iplan = 0; iplan < kNplan; iplan++) { | |
030b4415 | 246 | fClength[iplan][icham] = length[iplan][icham]; |
0a770ac9 | 247 | } |
248 | } | |
249 | ||
793ff80c | 250 | // The rotation matrix elements |
030b4415 | 251 | Float_t phi = 0.0; |
793ff80c | 252 | for (isect = 0; isect < fgkNsect; isect++) { |
5443e65e | 253 | phi = -2.0 * TMath::Pi() / (Float_t) fgkNsect * ((Float_t) isect + 0.5); |
793ff80c | 254 | fRotA11[isect] = TMath::Cos(phi); |
255 | fRotA12[isect] = TMath::Sin(phi); | |
256 | fRotA21[isect] = TMath::Sin(phi); | |
257 | fRotA22[isect] = TMath::Cos(phi); | |
258 | phi = -1.0 * phi; | |
259 | fRotB11[isect] = TMath::Cos(phi); | |
260 | fRotB12[isect] = TMath::Sin(phi); | |
261 | fRotB21[isect] = TMath::Sin(phi); | |
262 | fRotB22[isect] = TMath::Cos(phi); | |
263 | } | |
bd0f8685 | 264 | |
265 | for (isect = 0; isect < fgkNsect; isect++) { | |
266 | SetSMstatus(isect,1); | |
267 | } | |
793ff80c | 268 | |
269 | } | |
270 | ||
f7336fa3 | 271 | //_____________________________________________________________________________ |
bd0f8685 | 272 | void AliTRDgeometry::CreateGeometry(Int_t *idtmed) |
273 | { | |
274 | // | |
275 | // Create the TRD geometry without hole | |
276 | // | |
277 | // | |
278 | // Names of the TRD volumina (xx = detector number): | |
279 | // | |
280 | // Volume (Air) wrapping the readout chamber components | |
281 | // UTxx includes: UAxx, UDxx, UFxx, UUxx | |
0a5f3331 | 282 | // |
283 | // Volume (Air) wrapping the services (fee + cooling) | |
bd0f8685 | 284 | // UUxx the services volume has been reduced by 7.42 mm |
285 | // in order to allow shifts in radial direction | |
286 | // | |
0a5f3331 | 287 | // Lower part of the readout chambers (drift volume + radiator) |
bd0f8685 | 288 | // |
0a5f3331 | 289 | // UAxx Aluminum frames (Al) |
290 | // UBxx Wacosit frames (C) | |
291 | // UXxx Glue around radiator (Epoxy) | |
292 | // UCxx Inner volumes (Air) | |
293 | // UZxx Additional aluminum ledges (Al) | |
bd0f8685 | 294 | // |
295 | // Upper part of the readout chambers (readout plane + fee) | |
296 | // | |
0a5f3331 | 297 | // UDxx Wacosit frames of amp. region (C) |
298 | // UExx Inner volumes of the frame (Air) | |
299 | // UFxx Aluminum frame of back panel (Al) | |
300 | // UGxx Inner volumes of the back panel (Air) | |
bd0f8685 | 301 | // |
302 | // Inner material layers | |
303 | // | |
0a5f3331 | 304 | // UHxx Radiator (Rohacell) |
305 | // UJxx Drift volume (Xe/CO2) | |
306 | // UKxx Amplification volume (Xe/CO2) | |
307 | // UWxx Wire plane (Cu) | |
308 | // ULxx Pad plane (Cu) | |
309 | // UYxx Glue layer (Epoxy) | |
310 | // UMxx Support structure (Rohacell) | |
311 | // UNxx ROB base material (C) | |
312 | // UOxx ROB copper (Cu) | |
313 | // UVxx ROB other materials (Cu) | |
bd0f8685 | 314 | // |
315 | ||
316 | const Int_t kNparTrd = 4; | |
317 | const Int_t kNparCha = 3; | |
318 | ||
030b4415 | 319 | Float_t xpos; |
320 | Float_t ypos; | |
321 | Float_t zpos; | |
bd0f8685 | 322 | |
323 | Float_t parTrd[kNparTrd]; | |
324 | Float_t parCha[kNparCha]; | |
325 | ||
326 | Char_t cTagV[6]; | |
327 | Char_t cTagM[5]; | |
328 | ||
329 | // The TRD mother volume for one sector (Air), full length in z-direction | |
330 | // Provides material for side plates of super module | |
030b4415 | 331 | parTrd[0] = fgkSwidth1/2.0; |
332 | parTrd[1] = fgkSwidth2/2.0; | |
0a5f3331 | 333 | parTrd[2] = fgkSlength/2.0; |
030b4415 | 334 | parTrd[3] = fgkSheight/2.0; |
bd0f8685 | 335 | gMC->Gsvolu("UTR1","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
336 | ||
a797f961 | 337 | // The outer aluminum plates of the super module (Al) |
030b4415 | 338 | parTrd[0] = fgkSwidth1/2.0; |
339 | parTrd[1] = fgkSwidth2/2.0; | |
0a5f3331 | 340 | parTrd[2] = fgkSlength/2.0; |
030b4415 | 341 | parTrd[3] = fgkSheight/2.0; |
bd0f8685 | 342 | gMC->Gsvolu("UTS1","TRD1",idtmed[1301-1],parTrd,kNparTrd); |
343 | ||
344 | // The inner part of the TRD mother volume for one sector (Air), | |
345 | // full length in z-direction | |
030b4415 | 346 | parTrd[0] = fgkSwidth1/2.0 - fgkSMpltT; |
347 | parTrd[1] = fgkSwidth2/2.0 - fgkSMpltT; | |
0a5f3331 | 348 | parTrd[2] = fgkSlength/2.0; |
030b4415 | 349 | parTrd[3] = fgkSheight/2.0 - fgkSMpltT; |
bd0f8685 | 350 | gMC->Gsvolu("UTI1","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
351 | ||
352 | for (Int_t icham = 0; icham < kNcham; icham++) { | |
353 | for (Int_t iplan = 0; iplan < kNplan; iplan++) { | |
354 | ||
355 | Int_t iDet = GetDetectorSec(iplan,icham); | |
356 | ||
0a5f3331 | 357 | // The lower part of the readout chambers (drift volume + radiator) |
bd0f8685 | 358 | // The aluminum frames |
359 | sprintf(cTagV,"UA%02d",iDet); | |
030b4415 | 360 | parCha[0] = fCwidth[iplan]/2.0; |
361 | parCha[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0; | |
362 | parCha[2] = fgkCraH/2.0 + fgkCdrH/2.0; | |
bd0f8685 | 363 | fChamberUAboxd[iDet][0] = parCha[0]; |
364 | fChamberUAboxd[iDet][1] = parCha[1]; | |
365 | fChamberUAboxd[iDet][2] = parCha[2]; | |
366 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); | |
0a5f3331 | 367 | // The additional aluminum on the frames |
368 | // This part has not the correct postion but is just supposed to | |
369 | // represent the missing material. The correct from of the L-shaped | |
370 | // profile would not fit into the alignable volume. | |
371 | sprintf(cTagV,"UZ%02d",iDet); | |
372 | parCha[0] = fgkCroW/2.0; | |
373 | parCha[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0; | |
374 | parCha[2] = fgkCalW/2.0; | |
375 | fChamberUAboxd[iDet][0] = fChamberUAboxd[iDet][0] + fgkCroW; | |
376 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); | |
377 | // The Wacosit frames | |
bd0f8685 | 378 | sprintf(cTagV,"UB%02d",iDet); |
030b4415 | 379 | parCha[0] = fCwidth[iplan]/2.0 - fgkCalT; |
380 | parCha[1] = -1.0; | |
381 | parCha[2] = -1.0; | |
bd0f8685 | 382 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); |
0a5f3331 | 383 | // The glue around the radiator |
384 | sprintf(cTagV,"UX%02d",iDet); | |
030b4415 | 385 | parCha[0] = fCwidth[iplan]/2.0 - fgkCalT - fgkCclsT; |
0a5f3331 | 386 | parCha[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0 - fgkCclfT; |
387 | parCha[2] = fgkCraH/2.0; | |
388 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha); | |
389 | // The inner part of radiator (air) | |
390 | sprintf(cTagV,"UC%02d",iDet); | |
391 | parCha[0] = fCwidth[iplan]/2.0 - fgkCalT - fgkCclsT - fgkCglT; | |
392 | parCha[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0 - fgkCclfT - fgkCglT; | |
030b4415 | 393 | parCha[2] = -1.0; |
bd0f8685 | 394 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); |
395 | ||
0a5f3331 | 396 | // The upper part of the readout chambers (amplification volume) |
397 | // The Wacosit frames | |
bd0f8685 | 398 | sprintf(cTagV,"UD%02d",iDet); |
030b4415 | 399 | parCha[0] = fCwidth[iplan]/2.0 + fgkCroW; |
400 | parCha[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0; | |
401 | parCha[2] = fgkCamH/2.0; | |
bd0f8685 | 402 | fChamberUDboxd[iDet][0] = parCha[0]; |
403 | fChamberUDboxd[iDet][1] = parCha[1]; | |
404 | fChamberUDboxd[iDet][2] = parCha[2]; | |
405 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); | |
0a5f3331 | 406 | // The inner part of the Wacosit frame (air) |
bd0f8685 | 407 | sprintf(cTagV,"UE%02d",iDet); |
030b4415 | 408 | parCha[0] = fCwidth[iplan]/2.0 + fgkCroW - fgkCcuT; |
0a5f3331 | 409 | parCha[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0 - fgkCcuT; |
bd0f8685 | 410 | parCha[2] = -1.; |
411 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); | |
0a5f3331 | 412 | |
413 | // The support structure (pad plane, back panel, readout boards) | |
bd0f8685 | 414 | // The aluminum frames |
415 | sprintf(cTagV,"UF%02d",iDet); | |
030b4415 | 416 | parCha[0] = fCwidth[iplan]/2.0 + fgkCroW; |
417 | parCha[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0; | |
418 | parCha[2] = fgkCroH/2.0; | |
bd0f8685 | 419 | fChamberUFboxd[iDet][0] = parCha[0]; |
420 | fChamberUFboxd[iDet][1] = parCha[1]; | |
421 | fChamberUFboxd[iDet][2] = parCha[2]; | |
422 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); | |
423 | // The inner part of the aluminum frames | |
424 | sprintf(cTagV,"UG%02d",iDet); | |
030b4415 | 425 | parCha[0] = fCwidth[iplan]/2.0 + fgkCroW - fgkCauT; |
0a5f3331 | 426 | parCha[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0 - fgkCauT; |
030b4415 | 427 | parCha[2] = -1.0; |
bd0f8685 | 428 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); |
429 | ||
430 | // The material layers inside the chambers | |
0a5f3331 | 431 | // Rohacell layer (radiator) |
030b4415 | 432 | parCha[0] = -1.0; |
433 | parCha[1] = -1.0; | |
030b4415 | 434 | parCha[2] = fgkRaThick/2.0; |
bd0f8685 | 435 | sprintf(cTagV,"UH%02d",iDet); |
436 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1315-1],parCha,kNparCha); | |
bd0f8685 | 437 | // Xe/Isobutane layer (drift volume) |
0a5f3331 | 438 | parCha[0] = fCwidth[iplan]/2.0 - fgkCalT - fgkCclsT; |
439 | parCha[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0 - fgkCclfT; | |
030b4415 | 440 | parCha[2] = fgkDrThick/2.0; |
bd0f8685 | 441 | sprintf(cTagV,"UJ%02d",iDet); |
442 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha); | |
443 | // Xe/Isobutane layer (amplification volume) | |
0a5f3331 | 444 | parCha[0] = -1.0; |
445 | parCha[1] = -1.0; | |
030b4415 | 446 | parCha[2] = fgkAmThick/2.0; |
bd0f8685 | 447 | sprintf(cTagV,"UK%02d",iDet); |
448 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha); | |
0a5f3331 | 449 | // Cu layer (wire plane) |
450 | parCha[0] = -1.0; | |
451 | parCha[1] = -1.0; | |
452 | parCha[2] = fgkWrThick/2.0; | |
453 | sprintf(cTagV,"UW%02d",iDet); | |
454 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1303-1],parCha,kNparCha); | |
bd0f8685 | 455 | // Cu layer (pad plane) |
0a5f3331 | 456 | parCha[0] = -1.0; |
457 | parCha[1] = -1.0; | |
030b4415 | 458 | parCha[2] = fgkCuThick/2.0; |
bd0f8685 | 459 | sprintf(cTagV,"UL%02d",iDet); |
460 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1305-1],parCha,kNparCha); | |
0a5f3331 | 461 | // Epoxy layer (glue) |
462 | parCha[0] = -1.0; | |
463 | parCha[1] = -1.0; | |
464 | parCha[2] = fgkGlThick/2.0; | |
465 | sprintf(cTagV,"UY%02d",iDet); | |
466 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha); | |
bd0f8685 | 467 | // G10 layer (support structure / honeycomb) |
0a5f3331 | 468 | parCha[0] = -1.0; |
469 | parCha[1] = -1.0; | |
030b4415 | 470 | parCha[2] = fgkSuThick/2.0; |
bd0f8685 | 471 | sprintf(cTagV,"UM%02d",iDet); |
0a5f3331 | 472 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1310-1],parCha,kNparCha); |
473 | // G10 layer (PCB readout board) | |
474 | parCha[0] = -1.0; | |
475 | parCha[1] = -1.0; | |
a797f961 | 476 | parCha[2] = fgkRpThick/2; |
477 | sprintf(cTagV,"UN%02d",iDet); | |
478 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1313-1],parCha,kNparCha); | |
0a5f3331 | 479 | // Cu layer (traces in readout board) |
480 | parCha[0] = -1.0; | |
481 | parCha[1] = -1.0; | |
030b4415 | 482 | parCha[2] = fgkRcThick/2.0; |
a797f961 | 483 | sprintf(cTagV,"UO%02d",iDet); |
484 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1306-1],parCha,kNparCha); | |
0a5f3331 | 485 | // Cu layer (other material on in readout board) |
486 | parCha[0] = -1.0; | |
487 | parCha[1] = -1.0; | |
488 | parCha[2] = fgkRoThick/2.0; | |
489 | sprintf(cTagV,"UV%02d",iDet); | |
490 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1304-1],parCha,kNparCha); | |
bd0f8685 | 491 | |
492 | // Position the layers in the chambers | |
030b4415 | 493 | xpos = 0.0; |
494 | ypos = 0.0; | |
bd0f8685 | 495 | // Lower part |
496 | // Rohacell layer (radiator) | |
497 | zpos = fgkRaZpos; | |
498 | sprintf(cTagV,"UH%02d",iDet); | |
499 | sprintf(cTagM,"UC%02d",iDet); | |
500 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
bd0f8685 | 501 | // Xe/Isobutane layer (drift volume) |
502 | zpos = fgkDrZpos; | |
503 | sprintf(cTagV,"UJ%02d",iDet); | |
0a5f3331 | 504 | sprintf(cTagM,"UB%02d",iDet); |
bd0f8685 | 505 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
506 | // Upper part | |
507 | // Xe/Isobutane layer (amplification volume) | |
508 | zpos = fgkAmZpos; | |
509 | sprintf(cTagV,"UK%02d",iDet); | |
510 | sprintf(cTagM,"UE%02d",iDet); | |
511 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
0a5f3331 | 512 | // Cu layer (wire plane inside amplification volume) |
513 | zpos = fgkWrZpos; | |
514 | sprintf(cTagV,"UW%02d",iDet); | |
515 | sprintf(cTagM,"UK%02d",iDet); | |
516 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
517 | // Readout part + support plane | |
bd0f8685 | 518 | // Cu layer (pad plane) |
519 | zpos = fgkCuZpos; | |
520 | sprintf(cTagV,"UL%02d",iDet); | |
521 | sprintf(cTagM,"UG%02d",iDet); | |
522 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
0a5f3331 | 523 | // Epoxy layer (glue) |
524 | zpos = fgkGlZpos; | |
525 | sprintf(cTagV,"UY%02d",iDet); | |
526 | sprintf(cTagM,"UG%02d",iDet); | |
527 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
bd0f8685 | 528 | // G10 layer (support structure) |
529 | zpos = fgkSuZpos; | |
530 | sprintf(cTagV,"UM%02d",iDet); | |
531 | sprintf(cTagM,"UG%02d",iDet); | |
532 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
0a5f3331 | 533 | // G10 layer (PCB readout board) |
a797f961 | 534 | zpos = fgkRpZpos; |
535 | sprintf(cTagV,"UN%02d",iDet); | |
536 | sprintf(cTagM,"UG%02d",iDet); | |
537 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
0a5f3331 | 538 | // Cu layer (traces in readout board) |
a797f961 | 539 | zpos = fgkRcZpos; |
540 | sprintf(cTagV,"UO%02d",iDet); | |
541 | sprintf(cTagM,"UG%02d",iDet); | |
542 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
0a5f3331 | 543 | // Cu layer (other materials on readout board) |
544 | zpos = fgkRoZpos; | |
545 | sprintf(cTagV,"UV%02d",iDet); | |
546 | sprintf(cTagM,"UG%02d",iDet); | |
547 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
bd0f8685 | 548 | |
549 | // Position the inner volumes of the chambers in the frames | |
030b4415 | 550 | xpos = 0.0; |
551 | ypos = 0.0; | |
0a5f3331 | 552 | // The inner part of the radiator |
030b4415 | 553 | zpos = 0.0; |
bd0f8685 | 554 | sprintf(cTagV,"UC%02d",iDet); |
0a5f3331 | 555 | sprintf(cTagM,"UX%02d",iDet); |
556 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
557 | // The glue around the radiator | |
558 | zpos = fgkCraH/2.0 - fgkCdrH/2.0 - fgkCraH/2.0; | |
559 | sprintf(cTagV,"UX%02d",iDet); | |
bd0f8685 | 560 | sprintf(cTagM,"UB%02d",iDet); |
561 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
0a5f3331 | 562 | // The lower Wacosit frame inside the aluminum frame |
563 | zpos = 0.0; | |
bd0f8685 | 564 | sprintf(cTagV,"UB%02d",iDet); |
565 | sprintf(cTagM,"UA%02d",iDet); | |
566 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
0a5f3331 | 567 | // The inside of the upper Wacosit frame |
568 | zpos = 0.0; | |
bd0f8685 | 569 | sprintf(cTagV,"UE%02d",iDet); |
570 | sprintf(cTagM,"UD%02d",iDet); | |
571 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
572 | // The inside of the upper aluminum frame | |
0a5f3331 | 573 | zpos = 0.0; |
bd0f8685 | 574 | sprintf(cTagV,"UG%02d",iDet); |
575 | sprintf(cTagM,"UF%02d",iDet); | |
576 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
577 | ||
578 | // Position the frames of the chambers in the TRD mother volume | |
030b4415 | 579 | xpos = 0.0; |
580 | ypos = - fClength[iplan][0] - fClength[iplan][1] - fClength[iplan][2]/2.0; | |
bd0f8685 | 581 | for (Int_t ic = 0; ic < icham; ic++) { |
582 | ypos += fClength[iplan][ic]; | |
583 | } | |
030b4415 | 584 | ypos += fClength[iplan][icham]/2.0; |
0a5f3331 | 585 | zpos = fgkVrocsm + fgkSMpltT + fgkCraH/2.0 + fgkCdrH/2.0 - fgkSheight/2.0 |
a797f961 | 586 | + iplan * (fgkCH + fgkVspace); |
bd0f8685 | 587 | // The lower aluminum frame, radiator + drift region |
588 | sprintf(cTagV,"UA%02d",iDet); | |
589 | fChamberUAorig[iDet][0] = xpos; | |
590 | fChamberUAorig[iDet][1] = ypos; | |
591 | fChamberUAorig[iDet][2] = zpos; | |
592 | // The upper G10 frame, amplification region | |
593 | sprintf(cTagV,"UD%02d",iDet); | |
030b4415 | 594 | zpos += fgkCamH/2.0 + fgkCraH/2.0 + fgkCdrH/2.0; |
bd0f8685 | 595 | fChamberUDorig[iDet][0] = xpos; |
596 | fChamberUDorig[iDet][1] = ypos; | |
597 | fChamberUDorig[iDet][2] = zpos; | |
598 | // The upper aluminum frame | |
599 | sprintf(cTagV,"UF%02d",iDet); | |
030b4415 | 600 | zpos += fgkCroH/2.0 + fgkCamH/2.0; |
bd0f8685 | 601 | fChamberUForig[iDet][0] = xpos; |
602 | fChamberUForig[iDet][1] = ypos; | |
603 | fChamberUForig[iDet][2] = zpos; | |
604 | ||
605 | } | |
606 | } | |
607 | ||
608 | // Create the volumes of the super module frame | |
609 | CreateFrame(idtmed); | |
610 | ||
611 | // Create the volumes of the services | |
612 | CreateServices(idtmed); | |
613 | ||
614 | for (Int_t icham = 0; icham < kNcham; icham++) { | |
615 | for (Int_t iplan = 0; iplan < kNplan; iplan++) { | |
616 | GroupChamber(iplan,icham,idtmed); | |
617 | } | |
618 | } | |
619 | ||
030b4415 | 620 | xpos = 0.0; |
621 | ypos = 0.0; | |
622 | zpos = 0.0; | |
bd0f8685 | 623 | gMC->Gspos("UTI1",1,"UTS1",xpos,ypos,zpos,0,"ONLY"); |
624 | ||
030b4415 | 625 | xpos = 0.0; |
626 | ypos = 0.0; | |
627 | zpos = 0.0; | |
bd0f8685 | 628 | gMC->Gspos("UTS1",1,"UTR1",xpos,ypos,zpos,0,"ONLY"); |
629 | ||
630 | // Put the TRD volumes into the space frame mother volumes | |
631 | // if enabled via status flag | |
030b4415 | 632 | xpos = 0.0; |
633 | ypos = 0.0; | |
634 | zpos = 0.0; | |
bd0f8685 | 635 | for (Int_t isect = 0; isect < kNsect; isect++) { |
636 | if (fSMstatus[isect]) { | |
637 | sprintf(cTagV,"BTRD%d",isect); | |
f9017ffb | 638 | gMC->Gspos("UTR1",1,cTagV,xpos,ypos,zpos,0,"ONLY"); |
bd0f8685 | 639 | } |
640 | } | |
641 | ||
642 | } | |
643 | ||
644 | //_____________________________________________________________________________ | |
645 | void AliTRDgeometry::CreateFrame(Int_t *idtmed) | |
646 | { | |
647 | // | |
648 | // Create the geometry of the frame of the supermodule | |
649 | // | |
650 | // Names of the TRD services volumina | |
651 | // | |
652 | // USRL Support rails for the chambers (Al) | |
653 | // USxx Support cross bars between the chambers (Al) | |
0a5f3331 | 654 | // USHx Horizontal connection between the cross bars (Al) |
655 | // USLx Long corner ledges (Al) | |
bd0f8685 | 656 | // |
657 | ||
658 | Int_t iplan = 0; | |
659 | ||
660 | Float_t xpos = 0.0; | |
661 | Float_t ypos = 0.0; | |
662 | Float_t zpos = 0.0; | |
663 | ||
664 | Char_t cTagV[5]; | |
0a5f3331 | 665 | Char_t cTagM[5]; |
666 | ||
667 | // The rotation matrices | |
668 | const Int_t kNmatrix = 4; | |
669 | Int_t matrix[kNmatrix]; | |
670 | gMC->Matrix(matrix[0], 100.0, 0.0, 90.0, 90.0, 10.0, 0.0); | |
671 | gMC->Matrix(matrix[1], 80.0, 0.0, 90.0, 90.0, 10.0, 180.0); | |
672 | gMC->Matrix(matrix[2], 90.0, 0.0, 0.0, 0.0, 90.0, 90.0); | |
673 | gMC->Matrix(matrix[3], 90.0, 180.0, 0.0, 180.0, 90.0, 90.0); | |
bd0f8685 | 674 | |
675 | // | |
676 | // The chamber support rails | |
677 | // | |
678 | ||
030b4415 | 679 | const Float_t kSRLwid = 2.00; |
bd0f8685 | 680 | const Float_t kSRLhgt = 2.3; |
0a5f3331 | 681 | const Float_t kSRLdst = 1.0; |
bd0f8685 | 682 | const Int_t kNparSRL = 3; |
683 | Float_t parSRL[kNparSRL]; | |
0a5f3331 | 684 | parSRL[0] = kSRLwid /2.0; |
685 | parSRL[1] = fgkSlength/2.0; | |
686 | parSRL[2] = kSRLhgt /2.0; | |
bd0f8685 | 687 | gMC->Gsvolu("USRL","BOX ",idtmed[1301-1],parSRL,kNparSRL); |
688 | ||
689 | xpos = 0.0; | |
690 | ypos = 0.0; | |
691 | zpos = 0.0; | |
692 | for (iplan = 0; iplan < kNplan; iplan++) { | |
0a5f3331 | 693 | xpos = fCwidth[iplan]/2.0 + kSRLwid/2.0 + kSRLdst; |
bd0f8685 | 694 | ypos = 0.0; |
0a5f3331 | 695 | zpos = fgkVrocsm + fgkSMpltT + fgkCraH + fgkCdrH + fgkCamH |
696 | - fgkSheight/2.0 | |
bd0f8685 | 697 | + iplan * (fgkCH + fgkVspace); |
698 | gMC->Gspos("USRL",iplan+1 ,"UTI1", xpos,ypos,zpos,0,"ONLY"); | |
699 | gMC->Gspos("USRL",iplan+1+ kNplan,"UTI1",-xpos,ypos,zpos,0,"ONLY"); | |
bd0f8685 | 700 | } |
701 | ||
702 | // | |
703 | // The cross bars between the chambers | |
704 | // | |
705 | ||
706 | const Float_t kSCBwid = 1.0; | |
0a5f3331 | 707 | const Float_t kSCBthk = 2.0; |
708 | const Float_t kSCHhgt = 0.3; | |
709 | ||
bd0f8685 | 710 | const Int_t kNparSCB = 3; |
711 | Float_t parSCB[kNparSCB]; | |
030b4415 | 712 | parSCB[1] = kSCBwid/2.0; |
0a5f3331 | 713 | parSCB[2] = fgkCH /2.0 + fgkVspace/2.0 - kSCHhgt; |
714 | ||
715 | const Int_t kNparSCI = 3; | |
716 | Float_t parSCI[kNparSCI]; | |
717 | parSCI[1] = -1; | |
bd0f8685 | 718 | |
719 | xpos = 0.0; | |
720 | ypos = 0.0; | |
721 | zpos = 0.0; | |
722 | for (iplan = 0; iplan < kNplan; iplan++) { | |
723 | ||
0a5f3331 | 724 | // The aluminum of the cross bars |
030b4415 | 725 | parSCB[0] = fCwidth[iplan]/2.0 + kSRLdst/2.0; |
0a5f3331 | 726 | sprintf(cTagV,"USF%01d",iplan); |
bd0f8685 | 727 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parSCB,kNparSCB); |
bd0f8685 | 728 | |
0a5f3331 | 729 | // The empty regions in the cross bars |
730 | Float_t thkSCB = kSCBthk; | |
731 | if (iplan < 2) { | |
732 | thkSCB *= 1.5; | |
733 | } | |
734 | parSCI[2] = parSCB[2] - thkSCB; | |
735 | parSCI[0] = parSCB[0]/4.0 - kSCBthk; | |
736 | sprintf(cTagV,"USI%01d",iplan); | |
737 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parSCI,kNparSCI); | |
bd0f8685 | 738 | |
0a5f3331 | 739 | sprintf(cTagV,"USI%01d",iplan); |
740 | sprintf(cTagM,"USF%01d",iplan); | |
741 | ypos = 0.0; | |
742 | zpos = 0.0; | |
743 | xpos = parSCI[0] + thkSCB/2.0; | |
744 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
745 | xpos = - parSCI[0] - thkSCB/2.0; | |
746 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
747 | xpos = 3.0 * parSCI[0] + 1.5 * thkSCB; | |
748 | gMC->Gspos(cTagV,3,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
749 | xpos = - 3.0 * parSCI[0] - 1.5 * thkSCB; | |
750 | gMC->Gspos(cTagV,4,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
751 | ||
752 | sprintf(cTagV,"USF%01d",iplan); | |
bd0f8685 | 753 | xpos = 0.0; |
0a5f3331 | 754 | zpos = fgkVrocsm + fgkSMpltT + parSCB[2] - fgkSheight/2.0 |
755 | + iplan * (fgkCH + fgkVspace); | |
756 | ||
757 | ypos = fgkSlength/2.0 - kSCBwid/2.0; | |
bd0f8685 | 758 | gMC->Gspos(cTagV,1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
759 | ||
0a5f3331 | 760 | ypos = fClength[iplan][2]/2.0 + fClength[iplan][1]; |
761 | gMC->Gspos(cTagV,2,"UTI1", xpos,ypos,zpos,0,"ONLY"); | |
762 | ||
763 | ypos = fClength[iplan][2]/2.0; | |
764 | gMC->Gspos(cTagV,3,"UTI1", xpos,ypos,zpos,0,"ONLY"); | |
765 | ||
030b4415 | 766 | ypos = - fClength[iplan][2]/2.0; |
0a5f3331 | 767 | gMC->Gspos(cTagV,4,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
bd0f8685 | 768 | |
030b4415 | 769 | ypos = - fClength[iplan][2]/2.0 - fClength[iplan][1]; |
0a5f3331 | 770 | gMC->Gspos(cTagV,5,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
bd0f8685 | 771 | |
0a5f3331 | 772 | ypos = - fgkSlength/2.0 + kSCBwid/2.0; |
773 | gMC->Gspos(cTagV,6,"UTI1", xpos,ypos,zpos,0,"ONLY"); | |
774 | ||
775 | } | |
776 | ||
777 | // | |
778 | // The horizontal connections between the cross bars | |
779 | // | |
780 | ||
781 | const Int_t kNparSCH = 3; | |
782 | Float_t parSCH[kNparSCH]; | |
783 | ||
784 | for (iplan = 1; iplan < kNplan-1; iplan++) { | |
785 | ||
786 | parSCH[0] = fCwidth[iplan]/2.0; | |
787 | parSCH[1] = (fClength[iplan+1][2]/2.0 + fClength[iplan+1][1] | |
788 | - fClength[iplan ][2]/2.0 - fClength[iplan ][1])/2.0; | |
789 | parSCH[2] = kSCHhgt/2.0; | |
790 | ||
791 | sprintf(cTagV,"USH%01d",iplan); | |
792 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parSCH,kNparSCH); | |
bd0f8685 | 793 | xpos = 0.0; |
0a5f3331 | 794 | ypos = fClength[iplan][2]/2.0 + fClength[iplan][1] + parSCH[1]; |
795 | zpos = fgkVrocsm + fgkSMpltT - kSCHhgt/2.0 - fgkSheight/2.0 | |
796 | + (iplan+1) * (fgkCH + fgkVspace); | |
bd0f8685 | 797 | gMC->Gspos(cTagV,1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
0a5f3331 | 798 | ypos = -ypos; |
799 | gMC->Gspos(cTagV,2,"UTI1", xpos,ypos,zpos,0,"ONLY"); | |
bd0f8685 | 800 | |
801 | } | |
802 | ||
0a5f3331 | 803 | // |
804 | // The long corner ledges | |
805 | // | |
806 | ||
807 | const Int_t kNparSCL = 3; | |
808 | Float_t parSCL[kNparSCL]; | |
809 | const Int_t kNparSCLb = 11; | |
810 | Float_t parSCLb[kNparSCLb]; | |
811 | ||
812 | // Upper ledges | |
813 | // Thickness of the corner ledges | |
814 | const Float_t kSCLthkUa = 0.6; | |
815 | const Float_t kSCLthkUb = 0.6; | |
816 | // Width of the corner ledges | |
817 | const Float_t kSCLwidUa = 3.2; | |
818 | const Float_t kSCLwidUb = 4.8; | |
819 | // Position of the corner ledges | |
820 | const Float_t kSCLposxUa = 0.7; | |
821 | const Float_t kSCLposxUb = 3.3; | |
822 | const Float_t kSCLposzUa = 1.6; | |
823 | const Float_t kSCLposzUb = 0.3; | |
824 | // Vertical | |
825 | parSCL[0] = kSCLthkUa /2.0; | |
826 | parSCL[1] = fgkSlength/2.0; | |
827 | parSCL[2] = kSCLwidUa /2.0; | |
828 | gMC->Gsvolu("USL1","BOX ",idtmed[1301-1],parSCL,kNparSCL); | |
829 | xpos = fgkSwidth2/2.0 - fgkSMpltT - kSCLposxUa; | |
830 | ypos = 0.0; | |
831 | zpos = fgkSheight/2.0 - fgkSMpltT - kSCLposzUa; | |
832 | gMC->Gspos("USL1",1,"UTI1", xpos,ypos,zpos,matrix[0],"ONLY"); | |
833 | xpos = -xpos; | |
834 | gMC->Gspos("USL1",2,"UTI1", xpos,ypos,zpos,matrix[1],"ONLY"); | |
835 | // Horizontal | |
836 | parSCL[0] = kSCLwidUb /2.0; | |
837 | parSCL[1] = fgkSlength/2.0; | |
838 | parSCL[2] = kSCLthkUb /2.0; | |
839 | gMC->Gsvolu("USL2","BOX ",idtmed[1301-1],parSCL,kNparSCL); | |
840 | xpos = fgkSwidth2/2.0 - fgkSMpltT - kSCLposxUb; | |
841 | ypos = 0.0; | |
842 | zpos = fgkSheight/2.0 - fgkSMpltT - kSCLposzUb; | |
843 | gMC->Gspos("USL2",1,"UTI1", xpos,ypos,zpos, 0,"ONLY"); | |
844 | xpos = -xpos; | |
845 | gMC->Gspos("USL2",2,"UTI1", xpos,ypos,zpos, 0,"ONLY"); | |
846 | ||
847 | // Lower ledges | |
848 | // Thickness of the corner ledges | |
849 | const Float_t kSCLthkLa = 2.464; | |
850 | const Float_t kSCLthkLb = 1.0; | |
851 | // Width of the corner ledges | |
852 | const Float_t kSCLwidLa = 8.5; | |
853 | const Float_t kSCLwidLb = 3.3; | |
854 | // Position of the corner ledges | |
855 | const Float_t kSCLposxLa = 0.0; | |
856 | const Float_t kSCLposxLb = 2.6; | |
857 | const Float_t kSCLposzLa = -4.25; | |
858 | const Float_t kSCLposzLb = -0.5; | |
859 | // Vertical | |
860 | // Trapezoidal shape | |
861 | parSCLb[ 0] = fgkSlength/2.0; | |
862 | parSCLb[ 1] = 0.0; | |
863 | parSCLb[ 2] = 0.0; | |
864 | parSCLb[ 3] = kSCLwidLa /2.0; | |
865 | parSCLb[ 4] = kSCLthkLb /2.0; | |
866 | parSCLb[ 5] = kSCLthkLa /2.0; | |
867 | parSCLb[ 6] = 5.0; | |
868 | parSCLb[ 7] = kSCLwidLa /2.0; | |
869 | parSCLb[ 8] = kSCLthkLb /2.0; | |
870 | parSCLb[ 9] = kSCLthkLa /2.0; | |
871 | parSCLb[10] = 5.0; | |
872 | gMC->Gsvolu("USL3","TRAP",idtmed[1301-1],parSCLb,kNparSCLb); | |
873 | xpos = fgkSwidth1/2.0 - fgkSMpltT - kSCLposxLa; | |
874 | ypos = 0.0; | |
875 | zpos = - fgkSheight/2.0 + fgkSMpltT - kSCLposzLa; | |
876 | gMC->Gspos("USL3",1,"UTI1", xpos,ypos,zpos,matrix[2],"ONLY"); | |
877 | xpos = -xpos; | |
878 | gMC->Gspos("USL3",2,"UTI1", xpos,ypos,zpos,matrix[3],"ONLY"); | |
879 | // Horizontal | |
880 | parSCL[0] = kSCLwidLb /2.0; | |
881 | parSCL[1] = fgkSlength/2.0; | |
882 | parSCL[2] = kSCLthkLb /2.0; | |
883 | gMC->Gsvolu("USL4","BOX ",idtmed[1301-1],parSCL,kNparSCL); | |
884 | xpos = fgkSwidth1/2.0 - fgkSMpltT - kSCLposxLb; | |
885 | ypos = 0.0; | |
886 | zpos = - fgkSheight/2.0 + fgkSMpltT - kSCLposzLb; | |
887 | gMC->Gspos("USL4",1,"UTI1", xpos,ypos,zpos, 0,"ONLY"); | |
888 | xpos = -xpos; | |
889 | gMC->Gspos("USL4",2,"UTI1", xpos,ypos,zpos, 0,"ONLY"); | |
890 | ||
bd0f8685 | 891 | } |
892 | ||
893 | //_____________________________________________________________________________ | |
894 | void AliTRDgeometry::CreateServices(Int_t *idtmed) | |
895 | { | |
896 | // | |
897 | // Create the geometry of the services | |
898 | // | |
899 | // Names of the TRD services volumina | |
900 | // | |
901 | // UTCL Cooling arterias (Al) | |
902 | // UTCW Cooling arterias (Water) | |
903 | // UUxx Volumes for the services at the chambers (Air) | |
904 | // UTPW Power bars (Cu) | |
0a5f3331 | 905 | // UTCP Cooling pipes (Fe) |
bd0f8685 | 906 | // UTCH Cooling pipes (Water) |
907 | // UTPL Power lines (Cu) | |
908 | // UMCM Readout MCMs (G10/Cu/Si) | |
909 | // | |
910 | ||
911 | Int_t iplan = 0; | |
912 | Int_t icham = 0; | |
913 | ||
914 | Float_t xpos = 0.0; | |
915 | Float_t ypos = 0.0; | |
916 | Float_t zpos = 0.0; | |
917 | ||
918 | Char_t cTagV[5]; | |
919 | ||
920 | // The rotation matrices | |
99ed5146 | 921 | const Int_t kNmatrix = 4; |
bd0f8685 | 922 | Int_t matrix[kNmatrix]; |
030b4415 | 923 | gMC->Matrix(matrix[0], 100.0, 0.0, 90.0, 90.0, 10.0, 0.0); |
924 | gMC->Matrix(matrix[1], 80.0, 0.0, 90.0, 90.0, 10.0, 180.0); | |
925 | gMC->Matrix(matrix[2], 0.0, 0.0, 90.0, 90.0, 90.0, 0.0); | |
99ed5146 | 926 | gMC->Matrix(matrix[3], 180.0, 0.0, 90.0, 90.0, 90.0, 180.0); |
bd0f8685 | 927 | |
030b4415 | 928 | AliTRDCommonParam *commonParam = AliTRDCommonParam::Instance(); |
2745a409 | 929 | if (!commonParam) { |
930 | AliError("Could not get common parameters\n"); | |
bd0f8685 | 931 | return; |
932 | } | |
933 | ||
934 | // | |
935 | // The cooling arterias | |
936 | // | |
937 | ||
938 | // Width of the cooling arterias | |
0a5f3331 | 939 | const Float_t kCOLwid = 0.8; |
bd0f8685 | 940 | // Height of the cooling arterias |
0a5f3331 | 941 | const Float_t kCOLhgt = 6.5; |
bd0f8685 | 942 | // Positioning of the cooling |
0a5f3331 | 943 | const Float_t kCOLposx = 1.8; |
944 | const Float_t kCOLposz = -0.1; | |
bd0f8685 | 945 | // Thickness of the walls of the cooling arterias |
946 | const Float_t kCOLthk = 0.1; | |
030b4415 | 947 | const Int_t kNparCOL = 3; |
bd0f8685 | 948 | Float_t parCOL[kNparCOL]; |
0a5f3331 | 949 | parCOL[0] = kCOLwid /2.0; |
950 | parCOL[1] = fgkSlength/2.0; | |
951 | parCOL[2] = kCOLhgt /2.0; | |
952 | gMC->Gsvolu("UTCL","BOX ",idtmed[1308-1],parCOL,kNparCOL); | |
bd0f8685 | 953 | parCOL[0] -= kCOLthk; |
0a5f3331 | 954 | parCOL[1] = fgkSlength/2.0; |
bd0f8685 | 955 | parCOL[2] -= kCOLthk; |
956 | gMC->Gsvolu("UTCW","BOX ",idtmed[1314-1],parCOL,kNparCOL); | |
957 | ||
958 | xpos = 0.0; | |
959 | ypos = 0.0; | |
960 | zpos = 0.0; | |
961 | gMC->Gspos("UTCW",1,"UTCL", xpos,ypos,zpos,0,"ONLY"); | |
962 | ||
99ed5146 | 963 | for (iplan = 1; iplan < kNplan; iplan++) { |
964 | ||
030b4415 | 965 | xpos = fCwidth[iplan]/2.0 + kCOLwid/2.0 + kCOLposx; |
bd0f8685 | 966 | ypos = 0.0; |
0a5f3331 | 967 | zpos = fgkVrocsm + fgkSMpltT + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz |
a797f961 | 968 | + iplan * (fgkCH + fgkVspace); |
99ed5146 | 969 | gMC->Gspos("UTCL",iplan ,"UTI1", xpos,ypos,zpos,matrix[0],"ONLY"); |
970 | gMC->Gspos("UTCL",iplan+kNplan,"UTI1",-xpos,ypos,zpos,matrix[1],"ONLY"); | |
971 | ||
bd0f8685 | 972 | } |
973 | ||
99ed5146 | 974 | // The upper most layer (reaching into TOF acceptance) |
0a5f3331 | 975 | xpos = fCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3; |
99ed5146 | 976 | ypos = 0.0; |
0a5f3331 | 977 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0; |
99ed5146 | 978 | gMC->Gspos("UTCL",6 ,"UTI1", xpos,ypos,zpos,matrix[3],"ONLY"); |
979 | gMC->Gspos("UTCL",6+kNplan,"UTI1",-xpos,ypos,zpos,matrix[3],"ONLY"); | |
980 | ||
bd0f8685 | 981 | // |
982 | // The power bars | |
983 | // | |
984 | ||
985 | const Float_t kPWRwid = 0.6; | |
0a5f3331 | 986 | const Float_t kPWRhgt = 5.0; |
987 | const Float_t kPWRposx = 1.4; | |
988 | const Float_t kPWRposz = 1.9; | |
030b4415 | 989 | const Int_t kNparPWR = 3; |
bd0f8685 | 990 | Float_t parPWR[kNparPWR]; |
0a5f3331 | 991 | parPWR[0] = kPWRwid /2.0; |
992 | parPWR[1] = fgkSlength/2.0; | |
993 | parPWR[2] = kPWRhgt /2.0; | |
bd0f8685 | 994 | gMC->Gsvolu("UTPW","BOX ",idtmed[1325-1],parPWR,kNparPWR); |
995 | ||
99ed5146 | 996 | for (iplan = 1; iplan < kNplan; iplan++) { |
bd0f8685 | 997 | |
030b4415 | 998 | xpos = fCwidth[iplan]/2.0 + kPWRwid/2.0 + kPWRposx; |
bd0f8685 | 999 | ypos = 0.0; |
0a5f3331 | 1000 | zpos = fgkVrocsm + fgkSMpltT + kPWRhgt/2.0 - fgkSheight/2.0 + kPWRposz |
a797f961 | 1001 | + iplan * (fgkCH + fgkVspace); |
99ed5146 | 1002 | gMC->Gspos("UTPW",iplan ,"UTI1", xpos,ypos,zpos,matrix[0],"ONLY"); |
1003 | gMC->Gspos("UTPW",iplan+kNplan,"UTI1",-xpos,ypos,zpos,matrix[1],"ONLY"); | |
bd0f8685 | 1004 | |
1005 | } | |
1006 | ||
99ed5146 | 1007 | // The upper most layer (reaching into TOF acceptance) |
0a5f3331 | 1008 | xpos = fCwidth[5]/2.0 + kPWRhgt/2.0 - 1.3; |
99ed5146 | 1009 | ypos = 0.0; |
0a5f3331 | 1010 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0; |
99ed5146 | 1011 | gMC->Gspos("UTPW",6 ,"UTI1", xpos,ypos,zpos,matrix[3],"ONLY"); |
1012 | gMC->Gspos("UTPW",6+kNplan,"UTI1",-xpos,ypos,zpos,matrix[3],"ONLY"); | |
1013 | ||
bd0f8685 | 1014 | // |
1015 | // The volumes for the services at the chambers | |
1016 | // | |
1017 | ||
1018 | const Int_t kNparServ = 3; | |
1019 | Float_t parServ[kNparServ]; | |
1020 | ||
1021 | for (icham = 0; icham < kNcham; icham++) { | |
1022 | for (iplan = 0; iplan < kNplan; iplan++) { | |
bd0f8685 | 1023 | |
1024 | Int_t iDet = GetDetectorSec(iplan,icham); | |
1025 | ||
1026 | sprintf(cTagV,"UU%02d",iDet); | |
0a5f3331 | 1027 | parServ[0] = fCwidth[iplan] /2.0; |
030b4415 | 1028 | parServ[1] = fClength[iplan][icham]/2.0 - fgkHspace/2.0; |
0a5f3331 | 1029 | parServ[2] = fgkVspace /2.0 - 0.742/2.0; |
bd0f8685 | 1030 | fChamberUUboxd[iDet][0] = parServ[0]; |
1031 | fChamberUUboxd[iDet][1] = parServ[1]; | |
1032 | fChamberUUboxd[iDet][2] = parServ[2]; | |
bd0f8685 | 1033 | gMC->Gsvolu(cTagV,"BOX",idtmed[1302-1],parServ,kNparServ); |
a797f961 | 1034 | |
0a5f3331 | 1035 | xpos = 0.0; |
030b4415 | 1036 | ypos = - fClength[iplan][0] - fClength[iplan][1] - fClength[iplan][2]/2.0; |
bd0f8685 | 1037 | for (Int_t ic = 0; ic < icham; ic++) { |
1038 | ypos += fClength[iplan][ic]; | |
1039 | } | |
030b4415 | 1040 | ypos += fClength[iplan][icham]/2.0; |
0a5f3331 | 1041 | zpos = fgkVrocsm + fgkSMpltT + fgkCH + fgkVspace/2.0 - fgkSheight/2.0 |
a797f961 | 1042 | + iplan * (fgkCH + fgkVspace); |
030b4415 | 1043 | zpos -= 0.742/2.0; |
bd0f8685 | 1044 | fChamberUUorig[iDet][0] = xpos; |
1045 | fChamberUUorig[iDet][1] = ypos; | |
1046 | fChamberUUorig[iDet][2] = zpos; | |
1047 | ||
1048 | } | |
1049 | } | |
1050 | ||
1051 | // | |
1052 | // The cooling pipes inside the service volumes | |
1053 | // | |
1054 | ||
1055 | const Int_t kNparTube = 3; | |
1056 | Float_t parTube[kNparTube]; | |
0a5f3331 | 1057 | // The cooling pipes |
bd0f8685 | 1058 | parTube[0] = 0.0; |
1059 | parTube[1] = 0.0; | |
1060 | parTube[2] = 0.0; | |
1061 | gMC->Gsvolu("UTCP","TUBE",idtmed[1324-1],parTube,0); | |
1062 | // The cooling water | |
1063 | parTube[0] = 0.0; | |
030b4415 | 1064 | parTube[1] = 0.2/2.0; |
bd0f8685 | 1065 | parTube[2] = -1.; |
1066 | gMC->Gsvolu("UTCH","TUBE",idtmed[1314-1],parTube,kNparTube); | |
1067 | // Water inside the cooling pipe | |
1068 | xpos = 0.0; | |
1069 | ypos = 0.0; | |
1070 | zpos = 0.0; | |
1071 | gMC->Gspos("UTCH",1,"UTCP",xpos,ypos,zpos,0,"ONLY"); | |
1072 | ||
1073 | // Position the cooling pipes in the mother volume | |
1074 | const Int_t kNpar = 3; | |
1075 | Float_t par[kNpar]; | |
1076 | for (icham = 0; icham < kNcham; icham++) { | |
1077 | for (iplan = 0; iplan < kNplan; iplan++) { | |
bd0f8685 | 1078 | Int_t iDet = GetDetectorSec(iplan,icham); |
1079 | Int_t iCopy = GetDetector(iplan,icham,0) * 100; | |
1080 | Int_t nMCMrow = commonParam->GetRowMax(iplan,icham,0); | |
030b4415 | 1081 | Float_t ySize = (GetChamberLength(iplan,icham) - 2.0*fgkRpadW) |
bd0f8685 | 1082 | / ((Float_t) nMCMrow); |
1083 | sprintf(cTagV,"UU%02d",iDet); | |
1084 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { | |
1085 | xpos = 0.0; | |
1086 | ypos = (0.5 + iMCMrow) * ySize - 1.9 | |
030b4415 | 1087 | - fClength[iplan][icham]/2.0 + fgkHspace/2.0; |
1088 | zpos = 0.0 + 0.742/2.0; | |
bd0f8685 | 1089 | par[0] = 0.0; |
030b4415 | 1090 | par[1] = 0.3/2.0; // Thickness of the cooling pipes |
1091 | par[2] = fCwidth[iplan]/2.0; | |
bd0f8685 | 1092 | gMC->Gsposp("UTCP",iCopy+iMCMrow,cTagV,xpos,ypos,zpos |
1093 | ,matrix[2],"ONLY",par,kNpar); | |
1094 | } | |
1095 | } | |
1096 | } | |
1097 | ||
1098 | // | |
1099 | // The power lines | |
1100 | // | |
1101 | ||
1102 | // The copper power lines | |
1103 | parTube[0] = 0.0; | |
1104 | parTube[1] = 0.0; | |
1105 | parTube[2] = 0.0; | |
1106 | gMC->Gsvolu("UTPL","TUBE",idtmed[1305-1],parTube,0); | |
1107 | ||
1108 | // Position the power lines in the mother volume | |
1109 | for (icham = 0; icham < kNcham; icham++) { | |
1110 | for (iplan = 0; iplan < kNplan; iplan++) { | |
bd0f8685 | 1111 | Int_t iDet = GetDetectorSec(iplan,icham); |
1112 | Int_t iCopy = GetDetector(iplan,icham,0) * 100; | |
1113 | Int_t nMCMrow = commonParam->GetRowMax(iplan,icham,0); | |
030b4415 | 1114 | Float_t ySize = (GetChamberLength(iplan,icham) - 2.0*fgkRpadW) |
bd0f8685 | 1115 | / ((Float_t) nMCMrow); |
1116 | sprintf(cTagV,"UU%02d",iDet); | |
1117 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { | |
1118 | xpos = 0.0; | |
1119 | ypos = (0.5 + iMCMrow) * ySize - 1.0 | |
030b4415 | 1120 | - fClength[iplan][icham]/2.0 + fgkHspace/2.0; |
1121 | zpos = -0.4 + 0.742/2.0; | |
bd0f8685 | 1122 | par[0] = 0.0; |
030b4415 | 1123 | par[1] = 0.2/2.0; // Thickness of the power lines |
1124 | par[2] = fCwidth[iplan]/2.0; | |
bd0f8685 | 1125 | gMC->Gsposp("UTPL",iCopy+iMCMrow,cTagV,xpos,ypos,zpos |
1126 | ,matrix[2],"ONLY",par,kNpar); | |
1127 | } | |
1128 | } | |
1129 | } | |
1130 | ||
1131 | // | |
1132 | // The MCMs | |
1133 | // | |
1134 | ||
0a5f3331 | 1135 | const Float_t kMCMx = 3.0; |
1136 | const Float_t kMCMy = 3.0; | |
1137 | const Float_t kMCMz = 0.3; | |
1138 | ||
1139 | const Float_t kMCMpcTh = 0.1; | |
1140 | const Float_t kMCMcuTh = 0.0215; | |
1141 | const Float_t kMCMsiTh = 0.003; | |
1142 | const Float_t kMCMcoTh = 0.1549; | |
1143 | ||
bd0f8685 | 1144 | // The mother volume for the MCMs (air) |
1145 | const Int_t kNparMCM = 3; | |
1146 | Float_t parMCM[kNparMCM]; | |
0a5f3331 | 1147 | parMCM[0] = kMCMx /2.0; |
1148 | parMCM[1] = kMCMy /2.0; | |
1149 | parMCM[2] = kMCMz /2.0; | |
bd0f8685 | 1150 | gMC->Gsvolu("UMCM","BOX",idtmed[1302-1],parMCM,kNparMCM); |
1151 | ||
1152 | // The MCM carrier G10 layer | |
0a5f3331 | 1153 | parMCM[0] = kMCMx /2.0; |
1154 | parMCM[1] = kMCMy /2.0; | |
1155 | parMCM[2] = kMCMpcTh/2.0; | |
bd0f8685 | 1156 | gMC->Gsvolu("UMC1","BOX",idtmed[1319-1],parMCM,kNparMCM); |
1157 | // The MCM carrier Cu layer | |
0a5f3331 | 1158 | parMCM[0] = kMCMx /2.0; |
1159 | parMCM[1] = kMCMy /2.0; | |
1160 | parMCM[2] = kMCMcuTh/2.0; | |
bd0f8685 | 1161 | gMC->Gsvolu("UMC2","BOX",idtmed[1318-1],parMCM,kNparMCM); |
1162 | // The silicon of the chips | |
0a5f3331 | 1163 | parMCM[0] = kMCMx /2.0; |
1164 | parMCM[1] = kMCMy /2.0; | |
1165 | parMCM[2] = kMCMsiTh/2.0; | |
bd0f8685 | 1166 | gMC->Gsvolu("UMC3","BOX",idtmed[1320-1],parMCM,kNparMCM); |
0a5f3331 | 1167 | // The aluminum of the cooling plates |
1168 | parMCM[0] = kMCMx /2.0; | |
1169 | parMCM[1] = kMCMy /2.0; | |
1170 | parMCM[2] = kMCMcoTh/2.0; | |
1171 | gMC->Gsvolu("UMC4","BOX",idtmed[1324-1],parMCM,kNparMCM); | |
bd0f8685 | 1172 | |
1173 | // Put the MCM material inside the MCM mother volume | |
1174 | xpos = 0.0; | |
1175 | ypos = 0.0; | |
0a5f3331 | 1176 | zpos = -kMCMz /2.0 + kMCMpcTh/2.0; |
bd0f8685 | 1177 | gMC->Gspos("UMC1",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
0a5f3331 | 1178 | zpos += kMCMpcTh/2.0 + kMCMcuTh/2.0; |
bd0f8685 | 1179 | gMC->Gspos("UMC2",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
0a5f3331 | 1180 | zpos += kMCMcuTh/2.0 + kMCMsiTh/2.0; |
bd0f8685 | 1181 | gMC->Gspos("UMC3",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
0a5f3331 | 1182 | zpos += kMCMsiTh/2.0 + kMCMcoTh/2.0; |
1183 | gMC->Gspos("UMC4",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
bd0f8685 | 1184 | |
1185 | // Position the MCMs in the mother volume | |
1186 | for (icham = 0; icham < kNcham; icham++) { | |
1187 | for (iplan = 0; iplan < kNplan; iplan++) { | |
bd0f8685 | 1188 | Int_t iDet = GetDetectorSec(iplan,icham); |
1189 | Int_t iCopy = GetDetector(iplan,icham,0) * 1000; | |
1190 | Int_t nMCMrow = commonParam->GetRowMax(iplan,icham,0); | |
030b4415 | 1191 | Float_t ySize = (GetChamberLength(iplan,icham) - 2.0*fgkRpadW) |
bd0f8685 | 1192 | / ((Float_t) nMCMrow); |
1193 | Int_t nMCMcol = 8; | |
0a5f3331 | 1194 | Float_t xSize = (GetChamberWidth(iplan) - 2.0*fgkCpadW) |
bd0f8685 | 1195 | / ((Float_t) nMCMcol); |
1196 | sprintf(cTagV,"UU%02d",iDet); | |
1197 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { | |
1198 | for (Int_t iMCMcol = 0; iMCMcol < nMCMcol; iMCMcol++) { | |
1199 | xpos = (0.5 + iMCMcol) * xSize + 1.0 | |
030b4415 | 1200 | - fCwidth[iplan]/2.0; |
bd0f8685 | 1201 | ypos = (0.5 + iMCMrow) * ySize + 1.0 |
030b4415 | 1202 | - fClength[iplan][icham]/2.0 + fgkHspace/2.0; |
1203 | zpos = -0.4 + 0.742/2.0; | |
bd0f8685 | 1204 | par[0] = 0.0; |
030b4415 | 1205 | par[1] = 0.2/2.0; // Thickness of the power lines |
1206 | par[2] = fCwidth[iplan]/2.0; | |
bd0f8685 | 1207 | gMC->Gspos("UMCM",iCopy+iMCMrow*10+iMCMcol,cTagV |
1208 | ,xpos,ypos,zpos,0,"ONLY"); | |
1209 | } | |
1210 | } | |
1211 | ||
1212 | } | |
1213 | } | |
1214 | ||
1215 | } | |
1216 | ||
1217 | //_____________________________________________________________________________ | |
1218 | void AliTRDgeometry::GroupChamber(Int_t iplan, Int_t icham, Int_t *idtmed) | |
f7336fa3 | 1219 | { |
1220 | // | |
bd0f8685 | 1221 | // Group volumes UA, UD, UF, UU in a single chamber (Air) |
1222 | // UA, UD, UF, UU are boxes | |
1223 | // UT will be a box | |
0a770ac9 | 1224 | // |
bd0f8685 | 1225 | |
1226 | const Int_t kNparCha = 3; | |
1227 | ||
1228 | Int_t iDet = GetDetectorSec(iplan,icham); | |
1229 | ||
1230 | Float_t xyzMin[3]; | |
1231 | Float_t xyzMax[3]; | |
1232 | Float_t xyzOrig[3]; | |
1233 | Float_t xyzBoxd[3]; | |
1234 | ||
1235 | Char_t cTagV[5]; | |
1236 | Char_t cTagM[5]; | |
1237 | ||
1238 | for (Int_t i = 0; i < 3; i++) { | |
030b4415 | 1239 | xyzMin[i] = +9999.0; |
1240 | xyzMax[i] = -9999.0; | |
bd0f8685 | 1241 | } |
1242 | ||
1243 | for (Int_t i = 0; i < 3; i++) { | |
1244 | ||
1245 | xyzMin[i] = TMath::Min(xyzMin[i],fChamberUAorig[iDet][i]-fChamberUAboxd[iDet][i]); | |
1246 | xyzMax[i] = TMath::Max(xyzMax[i],fChamberUAorig[iDet][i]+fChamberUAboxd[iDet][i]); | |
1247 | ||
1248 | xyzMin[i] = TMath::Min(xyzMin[i],fChamberUDorig[iDet][i]-fChamberUDboxd[iDet][i]); | |
1249 | xyzMax[i] = TMath::Max(xyzMax[i],fChamberUDorig[iDet][i]+fChamberUDboxd[iDet][i]); | |
1250 | ||
1251 | xyzMin[i] = TMath::Min(xyzMin[i],fChamberUForig[iDet][i]-fChamberUFboxd[iDet][i]); | |
1252 | xyzMax[i] = TMath::Max(xyzMax[i],fChamberUForig[iDet][i]+fChamberUFboxd[iDet][i]); | |
1253 | ||
a797f961 | 1254 | xyzMin[i] = TMath::Min(xyzMin[i],fChamberUUorig[iDet][i]-fChamberUUboxd[iDet][i]); |
1255 | xyzMax[i] = TMath::Max(xyzMax[i],fChamberUUorig[iDet][i]+fChamberUUboxd[iDet][i]); | |
bd0f8685 | 1256 | |
1257 | xyzOrig[i] = 0.5*(xyzMax[i]+xyzMin[i]); | |
1258 | xyzBoxd[i] = 0.5*(xyzMax[i]-xyzMin[i]); | |
1259 | ||
1260 | } | |
1261 | ||
1262 | sprintf(cTagM,"UT%02d",iDet); | |
bd0f8685 | 1263 | gMC->Gsvolu(cTagM,"BOX ",idtmed[1302-1],xyzBoxd,kNparCha); |
1264 | ||
1265 | sprintf(cTagV,"UA%02d",iDet); | |
0a5f3331 | 1266 | gMC->Gspos(cTagV,1,cTagM |
1267 | ,fChamberUAorig[iDet][0]-xyzOrig[0] | |
1268 | ,fChamberUAorig[iDet][1]-xyzOrig[1] | |
1269 | ,fChamberUAorig[iDet][2]-xyzOrig[2] | |
1270 | ,0,"ONLY"); | |
1271 | ||
1272 | sprintf(cTagV,"UZ%02d",iDet); | |
1273 | gMC->Gspos(cTagV,1,cTagM | |
1274 | ,fChamberUAorig[iDet][0]-xyzOrig[0] + fChamberUAboxd[iDet][0] - fgkCroW/2.0 | |
1275 | ,fChamberUAorig[iDet][1]-xyzOrig[1] | |
1276 | ,fChamberUAorig[iDet][2]-xyzOrig[2] + fgkCraH/2.0 + fgkCdrH/2.0 - fgkCalW/2.0 | |
1277 | ,0,"ONLY"); | |
1278 | gMC->Gspos(cTagV,2,cTagM | |
1279 | ,fChamberUAorig[iDet][0]-xyzOrig[0] - fChamberUAboxd[iDet][0] + fgkCroW/2.0 | |
1280 | ,fChamberUAorig[iDet][1]-xyzOrig[1] | |
1281 | ,fChamberUAorig[iDet][2]-xyzOrig[2] + fgkCraH/2.0 + fgkCdrH/2.0 - fgkCalW/2.0 | |
1282 | ,0,"ONLY"); | |
bd0f8685 | 1283 | |
1284 | sprintf(cTagV,"UD%02d",iDet); | |
0a5f3331 | 1285 | gMC->Gspos(cTagV,1,cTagM |
1286 | ,fChamberUDorig[iDet][0]-xyzOrig[0] | |
1287 | ,fChamberUDorig[iDet][1]-xyzOrig[1] | |
1288 | ,fChamberUDorig[iDet][2]-xyzOrig[2] | |
1289 | ,0,"ONLY"); | |
bd0f8685 | 1290 | |
1291 | sprintf(cTagV,"UF%02d",iDet); | |
0a5f3331 | 1292 | gMC->Gspos(cTagV,1,cTagM |
1293 | ,fChamberUForig[iDet][0]-xyzOrig[0] | |
1294 | ,fChamberUForig[iDet][1]-xyzOrig[1] | |
1295 | ,fChamberUForig[iDet][2]-xyzOrig[2] | |
1296 | ,0,"ONLY"); | |
bd0f8685 | 1297 | |
a797f961 | 1298 | sprintf(cTagV,"UU%02d",iDet); |
0a5f3331 | 1299 | gMC->Gspos(cTagV,1,cTagM |
1300 | ,fChamberUUorig[iDet][0]-xyzOrig[0] | |
1301 | ,fChamberUUorig[iDet][1]-xyzOrig[1] | |
1302 | ,fChamberUUorig[iDet][2]-xyzOrig[2] | |
1303 | ,0,"ONLY"); | |
bd0f8685 | 1304 | |
1305 | sprintf(cTagV,"UT%02d",iDet); | |
0a5f3331 | 1306 | gMC->Gspos(cTagV,1,"UTI1" |
1307 | ,xyzOrig[0] | |
1308 | ,xyzOrig[1] | |
1309 | ,xyzOrig[2] | |
1310 | ,0,"ONLY"); | |
f7336fa3 | 1311 | |
1312 | } | |
1313 | ||
f7336fa3 | 1314 | //_____________________________________________________________________________ |
a5cadd36 | 1315 | Bool_t AliTRDgeometry::Rotate(Int_t d, Double_t *pos, Double_t *rot) const |
f7336fa3 | 1316 | { |
1317 | // | |
1318 | // Rotates all chambers in the position of sector 0 and transforms | |
1319 | // the coordinates in the ALICE restframe <pos> into the | |
1320 | // corresponding local frame <rot>. | |
1321 | // | |
1322 | ||
793ff80c | 1323 | Int_t sector = GetSector(d); |
f7336fa3 | 1324 | |
793ff80c | 1325 | rot[0] = pos[0] * fRotA11[sector] + pos[1] * fRotA12[sector]; |
1326 | rot[1] = -pos[0] * fRotA21[sector] + pos[1] * fRotA22[sector]; | |
f7336fa3 | 1327 | rot[2] = pos[2]; |
1328 | ||
1329 | return kTRUE; | |
1330 | ||
1331 | } | |
1332 | ||
1333 | //_____________________________________________________________________________ | |
a5cadd36 | 1334 | Bool_t AliTRDgeometry::RotateBack(Int_t d, Double_t *rot, Double_t *pos) const |
f7336fa3 | 1335 | { |
1336 | // | |
1337 | // Rotates a chambers from the position of sector 0 into its | |
1338 | // original position and transforms the corresponding local frame | |
1339 | // coordinates <rot> into the coordinates of the ALICE restframe <pos>. | |
1340 | // | |
1341 | ||
793ff80c | 1342 | Int_t sector = GetSector(d); |
f7336fa3 | 1343 | |
793ff80c | 1344 | pos[0] = rot[0] * fRotB11[sector] + rot[1] * fRotB12[sector]; |
1345 | pos[1] = -rot[0] * fRotB21[sector] + rot[1] * fRotB22[sector]; | |
6f1e466d | 1346 | pos[2] = rot[2]; |
f7336fa3 | 1347 | |
1348 | return kTRUE; | |
1349 | ||
1350 | } | |
1351 | ||
1352 | //_____________________________________________________________________________ | |
3551db50 | 1353 | Int_t AliTRDgeometry::GetDetectorSec(Int_t p, Int_t c) |
0a770ac9 | 1354 | { |
1355 | // | |
1356 | // Convert plane / chamber into detector number for one single sector | |
1357 | // | |
1358 | ||
1359 | return (p + c * fgkNplan); | |
1360 | ||
1361 | } | |
1362 | ||
1363 | //_____________________________________________________________________________ | |
3551db50 | 1364 | Int_t AliTRDgeometry::GetDetector(Int_t p, Int_t c, Int_t s) |
f7336fa3 | 1365 | { |
1366 | // | |
1367 | // Convert plane / chamber / sector into detector number | |
1368 | // | |
1369 | ||
793ff80c | 1370 | return (p + c * fgkNplan + s * fgkNplan * fgkNcham); |
f7336fa3 | 1371 | |
1372 | } | |
1373 | ||
1374 | //_____________________________________________________________________________ | |
afc51ac2 | 1375 | Int_t AliTRDgeometry::GetPlane(Int_t d) const |
f7336fa3 | 1376 | { |
1377 | // | |
1378 | // Reconstruct the plane number from the detector number | |
1379 | // | |
1380 | ||
793ff80c | 1381 | return ((Int_t) (d % fgkNplan)); |
f7336fa3 | 1382 | |
1383 | } | |
1384 | ||
1385 | //_____________________________________________________________________________ | |
afc51ac2 | 1386 | Int_t AliTRDgeometry::GetChamber(Int_t d) const |
f7336fa3 | 1387 | { |
1388 | // | |
1389 | // Reconstruct the chamber number from the detector number | |
1390 | // | |
1391 | ||
793ff80c | 1392 | return ((Int_t) (d % (fgkNplan * fgkNcham)) / fgkNplan); |
f7336fa3 | 1393 | |
1394 | } | |
1395 | ||
1396 | //_____________________________________________________________________________ | |
afc51ac2 | 1397 | Int_t AliTRDgeometry::GetSector(Int_t d) const |
f7336fa3 | 1398 | { |
1399 | // | |
1400 | // Reconstruct the sector number from the detector number | |
1401 | // | |
1402 | ||
793ff80c | 1403 | return ((Int_t) (d / (fgkNplan * fgkNcham))); |
f7336fa3 | 1404 | |
1405 | } | |
1406 | ||
bdbb05bb | 1407 | //_____________________________________________________________________________ |
0a5f3331 | 1408 | AliTRDgeometry *AliTRDgeometry::GetGeometry(AliRunLoader *runLoader) |
bdbb05bb | 1409 | { |
1410 | // | |
030b4415 | 1411 | // Load the geometry from the galice file |
bdbb05bb | 1412 | // |
1413 | ||
c965eab1 | 1414 | if (!runLoader) { |
1415 | runLoader = AliRunLoader::GetRunLoader(); | |
1416 | } | |
bdbb05bb | 1417 | if (!runLoader) { |
030b4415 | 1418 | AliErrorGeneral("AliTRDgeometry::GetGeometry","No run loader"); |
bdbb05bb | 1419 | return NULL; |
1420 | } | |
1421 | ||
030b4415 | 1422 | TDirectory *saveDir = gDirectory; |
bdbb05bb | 1423 | runLoader->CdGAFile(); |
1424 | ||
ecb36af7 | 1425 | // Try from the galice.root file |
030b4415 | 1426 | AliTRDgeometry *geom = (AliTRDgeometry *) gDirectory->Get("TRDgeometry"); |
ecb36af7 | 1427 | |
1428 | if (!geom) { | |
c965eab1 | 1429 | // If it is not in the file, try to get it from the run loader |
030b4415 | 1430 | AliTRD *trd = (AliTRD *) runLoader->GetAliRun()->GetDetector("TRD"); |
ecb36af7 | 1431 | geom = trd->GetGeometry(); |
1432 | } | |
2745a409 | 1433 | if (!geom) { |
030b4415 | 1434 | AliErrorGeneral("AliTRDgeometry::GetGeometry","Geometry not found"); |
2745a409 | 1435 | return NULL; |
1436 | } | |
bdbb05bb | 1437 | |
1438 | saveDir->cd(); | |
1439 | return geom; | |
b4a9cd27 | 1440 | |
bd0f8685 | 1441 | } |
b4a9cd27 | 1442 | |
1443 | //_____________________________________________________________________________ | |
bd0f8685 | 1444 | Bool_t AliTRDgeometry::ReadGeoMatrices() |
1445 | { | |
b4a9cd27 | 1446 | // |
1447 | // Read geo matrices from current gGeoManager for each TRD sector | |
1448 | // | |
1449 | ||
030b4415 | 1450 | if (!gGeoManager) { |
1451 | return kFALSE; | |
1452 | } | |
0a5f3331 | 1453 | |
030b4415 | 1454 | fMatrixArray = new TObjArray(kNdet); |
b4a9cd27 | 1455 | fMatrixCorrectionArray = new TObjArray(kNdet); |
030b4415 | 1456 | fMatrixGeo = new TObjArray(kNdet); |
b4a9cd27 | 1457 | AliAlignObjAngles o; |
bd0f8685 | 1458 | |
b4a9cd27 | 1459 | for (Int_t iLayer = AliAlignObj::kTRD1; iLayer <= AliAlignObj::kTRD6; iLayer++) { |
1460 | for (Int_t iModule = 0; iModule < AliAlignObj::LayerSize(iLayer); iModule++) { | |
030b4415 | 1461 | |
0a5f3331 | 1462 | UShort_t volid = AliAlignObj::LayerToVolUID(iLayer,iModule); |
1463 | const char *symname = AliAlignObj::SymName(volid); | |
1464 | TGeoPNEntry *pne = gGeoManager->GetAlignableEntry(symname); | |
1465 | const char *path = symname; | |
1466 | if (pne) { | |
1467 | path = pne->GetTitle(); | |
1468 | } | |
1469 | if (!gGeoManager->cd(path)) { | |
1470 | return kFALSE; | |
1471 | } | |
1472 | TGeoHMatrix *m = gGeoManager->GetCurrentMatrix(); | |
1473 | Int_t iLayerTRD = iLayer - AliAlignObj::kTRD1; | |
1474 | Int_t isector = Nsect() - 1 - (iModule/Ncham()); | |
1475 | Int_t ichamber = Ncham() - 1 - (iModule%Ncham()); | |
1476 | Int_t lid = GetDetector(iLayerTRD,ichamber,isector); | |
bd0f8685 | 1477 | |
b4a9cd27 | 1478 | // |
2745a409 | 1479 | // Local geo system z-x-y to x-y--z |
b4a9cd27 | 1480 | // |
1481 | fMatrixGeo->AddAt(new TGeoHMatrix(*m),lid); | |
1482 | ||
1483 | TGeoRotation mchange; | |
030b4415 | 1484 | mchange.RotateY(90); |
1485 | mchange.RotateX(90); | |
bd0f8685 | 1486 | |
b4a9cd27 | 1487 | TGeoHMatrix gMatrix(mchange.Inverse()); |
1488 | gMatrix.MultiplyLeft(m); | |
1489 | fMatrixArray->AddAt(new TGeoHMatrix(gMatrix),lid); | |
bd0f8685 | 1490 | |
b4a9cd27 | 1491 | // |
0a5f3331 | 1492 | // Cluster transformation matrix |
b4a9cd27 | 1493 | // |
1494 | TGeoHMatrix rotMatrix(mchange.Inverse()); | |
1495 | rotMatrix.MultiplyLeft(m); | |
030b4415 | 1496 | Double_t sectorAngle = 20.0 * (isector % 18) + 10.0; |
b4a9cd27 | 1497 | TGeoHMatrix rotSector; |
1498 | rotSector.RotateZ(sectorAngle); | |
1499 | rotMatrix.MultiplyLeft(&rotSector); | |
bd0f8685 | 1500 | |
b4a9cd27 | 1501 | fMatrixCorrectionArray->AddAt(new TGeoHMatrix(rotMatrix),lid); |
bd0f8685 | 1502 | |
b4a9cd27 | 1503 | } |
1504 | } | |
bd0f8685 | 1505 | |
b4a9cd27 | 1506 | return kTRUE; |
b4a9cd27 | 1507 | |
bd0f8685 | 1508 | } |
b4a9cd27 | 1509 |