| f7336fa3 |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| afc51ac2 |
16 | /* $Id$ */ |
| f7336fa3 |
17 | |
| 18 | /////////////////////////////////////////////////////////////////////////////// |
| 19 | // // |
| 20 | // TRD geometry class // |
| 21 | // // |
| 22 | /////////////////////////////////////////////////////////////////////////////// |
| 23 | |
| b4a9cd27 |
24 | #include <TGeoManager.h> |
| 25 | #include <TGeoPhysicalNode.h> |
| 2d0eca96 |
26 | #include <TVirtualMC.h> |
| e74d6d1b |
27 | #include <TMath.h> |
| b4a9cd27 |
28 | |
| 0d83b3a5 |
29 | #include "AliLog.h" |
| 90dbf5fb |
30 | #include "AliAlignObjParams.h" |
| 030b4415 |
31 | |
| 2745a409 |
32 | #include "AliTRDgeometry.h" |
| 33 | #include "AliTRDpadPlane.h" |
| ecb36af7 |
34 | |
| f7336fa3 |
35 | ClassImp(AliTRDgeometry) |
| 36 | |
| 793ff80c |
37 | //_____________________________________________________________________________ |
| 38 | |
| 39 | // |
| 40 | // The geometry constants |
| 41 | // |
| 053767a4 |
42 | const Int_t AliTRDgeometry::fgkNsector = kNsector; |
| 43 | const Int_t AliTRDgeometry::fgkNlayer = kNlayer; |
| 44 | const Int_t AliTRDgeometry::fgkNstack = kNstack; |
| 7925de54 |
45 | const Int_t AliTRDgeometry::fgkNdet = kNdet; |
| 793ff80c |
46 | |
| 47 | // |
| 48 | // Dimensions of the detector |
| 49 | // |
| 0a770ac9 |
50 | |
| b640260a |
51 | // Total length of the TRD mother volume |
| 52 | const Float_t AliTRDgeometry::fgkTlength = 751.0; |
| 53 | |
| 54 | // Parameter of the super module mother volumes |
| 7925de54 |
55 | const Float_t AliTRDgeometry::fgkSheight = 77.9; |
| 56 | const Float_t AliTRDgeometry::fgkSwidth1 = 94.881; |
| 57 | const Float_t AliTRDgeometry::fgkSwidth2 = 122.353; |
| b640260a |
58 | const Float_t AliTRDgeometry::fgkSlength = 702.0; |
| 59 | |
| 60 | // Length of the additional space in front of the supermodule |
| 61 | // used for services |
| 62 | const Float_t AliTRDgeometry::fgkFlength = (AliTRDgeometry::fgkTlength |
| 63 | - AliTRDgeometry::fgkSlength) / 2.0; |
| 793ff80c |
64 | |
| 73ae7b59 |
65 | // The super module side plates |
| 7925de54 |
66 | const Float_t AliTRDgeometry::fgkSMpltT = 0.2; |
| 73ae7b59 |
67 | |
| 053a5ea0 |
68 | // Vertical spacing of the chambers |
| 69 | const Float_t AliTRDgeometry::fgkVspace = 1.784; |
| 70 | // Horizontal spacing of the chambers |
| 71 | const Float_t AliTRDgeometry::fgkHspace = 2.0; |
| 72 | // Radial distance of the first ROC to the outer plates of the SM |
| 73 | const Float_t AliTRDgeometry::fgkVrocsm = 1.2; |
| 74 | |
| 0a770ac9 |
75 | // Height of different chamber parts |
| 76 | // Radiator |
| 7925de54 |
77 | const Float_t AliTRDgeometry::fgkCraH = 4.8; |
| 0a770ac9 |
78 | // Drift region |
| 7925de54 |
79 | const Float_t AliTRDgeometry::fgkCdrH = 3.0; |
| 0a770ac9 |
80 | // Amplification region |
| 7925de54 |
81 | const Float_t AliTRDgeometry::fgkCamH = 0.7; |
| 0a770ac9 |
82 | // Readout |
| 7925de54 |
83 | const Float_t AliTRDgeometry::fgkCroH = 2.316; |
| 053a5ea0 |
84 | // Additional width of the readout chamber frames |
| 85 | const Float_t AliTRDgeometry::fgkCroW = 0.9; |
| 86 | // Services on top of ROC |
| 87 | const Float_t AliTRDgeometry::fgkCsvH = AliTRDgeometry::fgkVspace |
| 88 | - 0.742; |
| 89 | // Total height (w/o services) |
| 7925de54 |
90 | const Float_t AliTRDgeometry::fgkCH = AliTRDgeometry::fgkCraH |
| 91 | + AliTRDgeometry::fgkCdrH |
| 92 | + AliTRDgeometry::fgkCamH |
| 25ca55ce |
93 | + AliTRDgeometry::fgkCroH; |
| 053a5ea0 |
94 | // Total height (with services) |
| 95 | |
| 96 | const Float_t AliTRDgeometry::fgkCHsv = AliTRDgeometry::fgkCH |
| 97 | + AliTRDgeometry::fgkCsvH; |
| 0a770ac9 |
98 | |
| a72494bb |
99 | // Distance of anode wire plane relative to middle of alignable volume |
| 100 | const Float_t AliTRDgeometry::fgkAnodePos = AliTRDgeometry::fgkCraH |
| 101 | + AliTRDgeometry::fgkCdrH |
| 102 | + AliTRDgeometry::fgkCamH/2.0 |
| 053a5ea0 |
103 | - AliTRDgeometry::fgkCHsv/2.0; |
| a797f961 |
104 | |
| 0a770ac9 |
105 | // Thicknesses of different parts of the chamber frame |
| 106 | // Lower aluminum frame |
| 7925de54 |
107 | const Float_t AliTRDgeometry::fgkCalT = 0.4; |
| 0a5f3331 |
108 | // Lower Wacosit frame sides |
| 7925de54 |
109 | const Float_t AliTRDgeometry::fgkCclsT = 0.21; |
| 0a5f3331 |
110 | // Lower Wacosit frame front |
| 7925de54 |
111 | const Float_t AliTRDgeometry::fgkCclfT = 1.0; |
| 0a5f3331 |
112 | // Thickness of glue around radiator |
| 7925de54 |
113 | const Float_t AliTRDgeometry::fgkCglT = 0.25; |
| 053a5ea0 |
114 | // Upper Wacosit frame around amplification region |
| 115 | const Float_t AliTRDgeometry::fgkCcuTa = 1.0; |
| 116 | const Float_t AliTRDgeometry::fgkCcuTb = 0.8; |
| 0a5f3331 |
117 | // Al frame of back panel |
| 7925de54 |
118 | const Float_t AliTRDgeometry::fgkCauT = 1.5; |
| 053a5ea0 |
119 | // Additional Al ledge at the lower chamber frame |
| 120 | // Actually the dimensions are not realistic, but |
| 121 | // modified in order to allow to mis-alignment. |
| 122 | // The amount of material is, however, correct |
| 123 | const Float_t AliTRDgeometry::fgkCalW = 2.5; |
| 124 | const Float_t AliTRDgeometry::fgkCalH = 0.4; |
| 125 | const Float_t AliTRDgeometry::fgkCalWmod = 0.4; |
| 126 | const Float_t AliTRDgeometry::fgkCalHmod = 2.5; |
| 127 | // Additional Wacosit ledge at the lower chamber frame |
| 128 | const Float_t AliTRDgeometry::fgkCwsW = 1.2; |
| 129 | const Float_t AliTRDgeometry::fgkCwsH = 0.3; |
| 0a770ac9 |
130 | |
| 131 | // Difference of outer chamber width and pad plane width |
| 7925de54 |
132 | const Float_t AliTRDgeometry::fgkCpadW = 0.0; |
| 133 | const Float_t AliTRDgeometry::fgkRpadW = 1.0; |
| 793ff80c |
134 | |
| 135 | // |
| 136 | // Thickness of the the material layers |
| 137 | // |
| 7925de54 |
138 | const Float_t AliTRDgeometry::fgkDrThick = AliTRDgeometry::fgkCdrH; |
| 139 | const Float_t AliTRDgeometry::fgkAmThick = AliTRDgeometry::fgkCamH; |
| 140 | const Float_t AliTRDgeometry::fgkXeThick = AliTRDgeometry::fgkDrThick |
| 141 | + AliTRDgeometry::fgkAmThick; |
| 053a5ea0 |
142 | const Float_t AliTRDgeometry::fgkWrThick = 0.00011; |
| 143 | |
| 144 | const Float_t AliTRDgeometry::fgkRMyThick = 0.0015; |
| 145 | const Float_t AliTRDgeometry::fgkRCbThick = 0.0055; |
| 146 | const Float_t AliTRDgeometry::fgkRGlThick = 0.0065; |
| 147 | const Float_t AliTRDgeometry::fgkRRhThick = 0.8; |
| 148 | const Float_t AliTRDgeometry::fgkRFbThick = fgkCraH - 2.0 * (fgkRMyThick |
| 149 | + fgkRCbThick |
| 150 | + fgkRRhThick); |
| 151 | |
| 152 | const Float_t AliTRDgeometry::fgkPPdThick = 0.0025; |
| 153 | const Float_t AliTRDgeometry::fgkPPpThick = 0.0356; |
| 154 | const Float_t AliTRDgeometry::fgkPGlThick = 0.1428; |
| 155 | const Float_t AliTRDgeometry::fgkPCbThick = 0.019; |
| 156 | const Float_t AliTRDgeometry::fgkPPcThick = 0.0486; |
| 157 | const Float_t AliTRDgeometry::fgkPRbThick = 0.0057; |
| 158 | const Float_t AliTRDgeometry::fgkPElThick = 0.0029; |
| 159 | const Float_t AliTRDgeometry::fgkPHcThick = fgkCroH - fgkPPdThick |
| 160 | - fgkPPpThick |
| 161 | - fgkPGlThick |
| 162 | - fgkPCbThick * 2.0 |
| 163 | - fgkPPcThick |
| 164 | - fgkPRbThick |
| 165 | - fgkPElThick; |
| 793ff80c |
166 | |
| 167 | // |
| 168 | // Position of the material layers |
| 169 | // |
| 7925de54 |
170 | const Float_t AliTRDgeometry::fgkDrZpos = 2.4; |
| 171 | const Float_t AliTRDgeometry::fgkAmZpos = 0.0; |
| 053a5ea0 |
172 | const Float_t AliTRDgeometry::fgkWrZposA = 0.0; |
| 173 | const Float_t AliTRDgeometry::fgkWrZposB = -fgkAmThick/2.0 + 0.001; |
| 174 | const Float_t AliTRDgeometry::fgkCalZpos = 0.3; |
| 7925de54 |
175 | |
| 25ca55ce |
176 | const Int_t AliTRDgeometry::fgkMCMmax = 16; |
| 177 | const Int_t AliTRDgeometry::fgkMCMrow = 4; |
| 178 | const Int_t AliTRDgeometry::fgkROBmaxC0 = 6; |
| 179 | const Int_t AliTRDgeometry::fgkROBmaxC1 = 8; |
| 7925de54 |
180 | const Int_t AliTRDgeometry::fgkADCmax = 21; |
| 181 | const Int_t AliTRDgeometry::fgkTBmax = 60; |
| 25ca55ce |
182 | const Int_t AliTRDgeometry::fgkPadmax = 18; |
| 7925de54 |
183 | const Int_t AliTRDgeometry::fgkColmax = 144; |
| 184 | const Int_t AliTRDgeometry::fgkRowmaxC0 = 12; |
| 185 | const Int_t AliTRDgeometry::fgkRowmaxC1 = 16; |
| 0a5f3331 |
186 | |
| ca06fab2 |
187 | const Double_t AliTRDgeometry::fgkTime0Base = 300.65; |
| 7925de54 |
188 | const Float_t AliTRDgeometry::fgkTime0[6] = { fgkTime0Base + 0 * (Cheight() + Cspace()) |
| 189 | , fgkTime0Base + 1 * (Cheight() + Cspace()) |
| 190 | , fgkTime0Base + 2 * (Cheight() + Cspace()) |
| 191 | , fgkTime0Base + 3 * (Cheight() + Cspace()) |
| 192 | , fgkTime0Base + 4 * (Cheight() + Cspace()) |
| 193 | , fgkTime0Base + 5 * (Cheight() + Cspace())}; |
| 793ff80c |
194 | |
| cff68175 |
195 | const Double_t AliTRDgeometry::fgkXtrdBeg = 288.43; // Values depend on position of TRD |
| 196 | const Double_t AliTRDgeometry::fgkXtrdEnd = 366.33; // mother volume inside space frame !!! |
| 197 | |
| 225096c8 |
198 | // The outer width of the chambers |
| 199 | const Float_t AliTRDgeometry::fgkCwidth[kNlayer] = {90.4, 94.8, 99.3, 103.7, 108.1, 112.6}; |
| 200 | |
| 201 | // The outer lengths of the chambers |
| 202 | // Includes the spacings between the chambers! |
| 203 | const Float_t AliTRDgeometry::fgkClength[kNlayer][kNstack] = { { 124.0, 124.0, 110.0, 124.0, 124.0 } |
| 204 | , { 124.0, 124.0, 110.0, 124.0, 124.0 } |
| 205 | , { 131.0, 131.0, 110.0, 131.0, 131.0 } |
| 206 | , { 138.0, 138.0, 110.0, 138.0, 138.0 } |
| 207 | , { 145.0, 145.0, 110.0, 145.0, 145.0 } |
| 208 | , { 147.0, 147.0, 110.0, 147.0, 147.0 } }; |
| 209 | |
| 210 | TObjArray* AliTRDgeometry::fgClusterMatrixArray = NULL; |
| 211 | |
| 212 | TObjArray* AliTRDgeometry::fgPadPlaneArray = NULL; |
| 213 | |
| f7336fa3 |
214 | //_____________________________________________________________________________ |
| 2745a409 |
215 | AliTRDgeometry::AliTRDgeometry() |
| 216 | :AliGeometry() |
| f7336fa3 |
217 | { |
| 218 | // |
| 219 | // AliTRDgeometry default constructor |
| 220 | // |
| bd0f8685 |
221 | |
| 2745a409 |
222 | Init(); |
| 223 | |
| 224 | } |
| 225 | |
| 226 | //_____________________________________________________________________________ |
| 227 | AliTRDgeometry::AliTRDgeometry(const AliTRDgeometry &g) |
| 228 | :AliGeometry(g) |
| 2745a409 |
229 | { |
| 230 | // |
| 231 | // AliTRDgeometry copy constructor |
| 232 | // |
| bd0f8685 |
233 | |
| f7336fa3 |
234 | Init(); |
| bd0f8685 |
235 | |
| f7336fa3 |
236 | } |
| 237 | |
| 238 | //_____________________________________________________________________________ |
| 239 | AliTRDgeometry::~AliTRDgeometry() |
| 240 | { |
| 8230f242 |
241 | // |
| 242 | // AliTRDgeometry destructor |
| 243 | // |
| bd0f8685 |
244 | |
| f7336fa3 |
245 | } |
| 246 | |
| 2745a409 |
247 | //_____________________________________________________________________________ |
| 248 | AliTRDgeometry &AliTRDgeometry::operator=(const AliTRDgeometry &g) |
| 249 | { |
| 250 | // |
| 251 | // Assignment operator |
| 252 | // |
| 253 | |
| 0a5f3331 |
254 | if (this != &g) { |
| 255 | Init(); |
| 256 | } |
| 030b4415 |
257 | |
| 2745a409 |
258 | return *this; |
| 259 | |
| 260 | } |
| 261 | |
| f7336fa3 |
262 | //_____________________________________________________________________________ |
| 263 | void AliTRDgeometry::Init() |
| 264 | { |
| 265 | // |
| 266 | // Initializes the geometry parameter |
| 267 | // |
| f7336fa3 |
268 | |
| 793ff80c |
269 | // The rotation matrix elements |
| 030b4415 |
270 | Float_t phi = 0.0; |
| 225096c8 |
271 | for (Int_t isector = 0; isector < fgkNsector; isector++) { |
| 053767a4 |
272 | phi = 2.0 * TMath::Pi() / (Float_t) fgkNsector * ((Float_t) isector + 0.5); |
| 273 | fRotB11[isector] = TMath::Cos(phi); |
| 274 | fRotB12[isector] = TMath::Sin(phi); |
| 275 | fRotB21[isector] = TMath::Sin(phi); |
| 276 | fRotB22[isector] = TMath::Cos(phi); |
| 793ff80c |
277 | } |
| 278 | |
| 18c05eb3 |
279 | // SM status |
| 280 | for (Int_t i = 0; i < kNsector; i++) { |
| 281 | fSMstatus[i] = 1; |
| 282 | } |
| 5f6f5c22 |
283 | |
| 284 | } |
| 285 | |
| f162af62 |
286 | //_____________________________________________________________________________ |
| 287 | void AliTRDgeometry::CreatePadPlaneArray() |
| 288 | { |
| 289 | // |
| 290 | // Creates the array of AliTRDpadPlane objects |
| 291 | // |
| 292 | |
| 225096c8 |
293 | if (fgPadPlaneArray) |
| 294 | return; |
| f162af62 |
295 | |
| 225096c8 |
296 | fgPadPlaneArray = new TObjArray(fgkNlayer * fgkNstack); |
| 053767a4 |
297 | for (Int_t ilayer = 0; ilayer < fgkNlayer; ilayer++) { |
| 298 | for (Int_t istack = 0; istack < fgkNstack; istack++) { |
| 299 | Int_t ipp = GetDetectorSec(ilayer,istack); |
| 225096c8 |
300 | fgPadPlaneArray->AddAt(CreatePadPlane(ilayer,istack),ipp); |
| f162af62 |
301 | } |
| 302 | } |
| 303 | |
| 304 | } |
| 305 | |
| 306 | //_____________________________________________________________________________ |
| 053767a4 |
307 | AliTRDpadPlane *AliTRDgeometry::CreatePadPlane(Int_t ilayer, Int_t istack) |
| f162af62 |
308 | { |
| 309 | // |
| 310 | // Creates an AliTRDpadPlane object |
| 311 | // |
| 312 | |
| 313 | AliTRDpadPlane *padPlane = new AliTRDpadPlane(); |
| 314 | |
| 053767a4 |
315 | padPlane->SetLayer(ilayer); |
| 316 | padPlane->SetStack(istack); |
| f162af62 |
317 | |
| 318 | padPlane->SetRowSpacing(0.0); |
| 319 | padPlane->SetColSpacing(0.0); |
| 320 | |
| 321 | padPlane->SetLengthRim(1.0); |
| 322 | padPlane->SetWidthRim(0.5); |
| 323 | |
| 324 | padPlane->SetNcols(144); |
| 325 | |
| 58897a75 |
326 | padPlane->SetAnodeWireOffset(0.25); |
| 327 | |
| f162af62 |
328 | // |
| 329 | // The pad plane parameter |
| 330 | // |
| 59f44727 |
331 | const Float_t kTiltAngle = 2.0; |
| 053767a4 |
332 | switch (ilayer) { |
| f162af62 |
333 | case 0: |
| 053767a4 |
334 | if (istack == 2) { |
| f162af62 |
335 | // L0C0 type |
| 336 | padPlane->SetNrows(12); |
| 337 | padPlane->SetLength(108.0); |
| f162af62 |
338 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
339 | padPlane->SetLengthIPad(9.0); |
| f162af62 |
340 | } |
| 341 | else { |
| 342 | // L0C1 type |
| 343 | padPlane->SetNrows(16); |
| 344 | padPlane->SetLength(122.0); |
| f162af62 |
345 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
346 | padPlane->SetLengthIPad(7.5); |
| f162af62 |
347 | } |
| 59f44727 |
348 | padPlane->SetWidth(92.2); |
| 349 | padPlane->SetWidthOPad(0.515); |
| 350 | padPlane->SetWidthIPad(0.635); |
| 351 | padPlane->SetTiltingAngle(-kTiltAngle); |
| f162af62 |
352 | break; |
| 353 | case 1: |
| 053767a4 |
354 | if (istack == 2) { |
| f162af62 |
355 | // L1C0 type |
| 356 | padPlane->SetNrows(12); |
| 357 | padPlane->SetLength(108.0); |
| f162af62 |
358 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
359 | padPlane->SetLengthIPad(9.0); |
| f162af62 |
360 | } |
| 361 | else { |
| 362 | // L1C1 type |
| 363 | padPlane->SetNrows(16); |
| 364 | padPlane->SetLength(122.0); |
| f162af62 |
365 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
366 | padPlane->SetLengthIPad(7.5); |
| f162af62 |
367 | } |
| 59f44727 |
368 | padPlane->SetWidth(96.6); |
| 369 | padPlane->SetWidthOPad(0.585); |
| 370 | padPlane->SetWidthIPad(0.665); |
| 371 | padPlane->SetTiltingAngle(kTiltAngle); |
| f162af62 |
372 | break; |
| 373 | case 2: |
| 053767a4 |
374 | if (istack == 2) { |
| f162af62 |
375 | // L2C0 type |
| 376 | padPlane->SetNrows(12); |
| 377 | padPlane->SetLength(108.0); |
| f162af62 |
378 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
379 | padPlane->SetLengthIPad(9.0); |
| f162af62 |
380 | } |
| 381 | else { |
| 382 | // L2C1 type |
| 383 | padPlane->SetNrows(16); |
| 384 | padPlane->SetLength(129.0); |
| f162af62 |
385 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
386 | padPlane->SetLengthIPad(8.0); |
| f162af62 |
387 | } |
| 59f44727 |
388 | padPlane->SetWidth(101.1); |
| 389 | padPlane->SetWidthOPad(0.705); |
| 390 | padPlane->SetWidthIPad(0.695); |
| 391 | padPlane->SetTiltingAngle(-kTiltAngle); |
| f162af62 |
392 | break; |
| 393 | case 3: |
| 053767a4 |
394 | if (istack == 2) { |
| f162af62 |
395 | // L3C0 type |
| 396 | padPlane->SetNrows(12); |
| 397 | padPlane->SetLength(108.0); |
| f162af62 |
398 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
399 | padPlane->SetLengthIPad(9.0); |
| f162af62 |
400 | } |
| 401 | else { |
| 402 | // L3C1 type |
| 403 | padPlane->SetNrows(16); |
| 404 | padPlane->SetLength(136.0); |
| f162af62 |
405 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
406 | padPlane->SetLengthIPad(8.5); |
| f162af62 |
407 | } |
| 59f44727 |
408 | padPlane->SetWidth(105.5); |
| 409 | padPlane->SetWidthOPad(0.775); |
| 410 | padPlane->SetWidthIPad(0.725); |
| 411 | padPlane->SetTiltingAngle(kTiltAngle); |
| f162af62 |
412 | break; |
| 413 | case 4: |
| 053767a4 |
414 | if (istack == 2) { |
| f162af62 |
415 | // L4C0 type |
| 416 | padPlane->SetNrows(12); |
| 417 | padPlane->SetLength(108.0); |
| f162af62 |
418 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
419 | } |
| 420 | else { |
| 421 | // L4C1 type |
| 422 | padPlane->SetNrows(16); |
| 423 | padPlane->SetLength(143.0); |
| f162af62 |
424 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
425 | } |
| 59f44727 |
426 | padPlane->SetWidth(109.9); |
| 427 | padPlane->SetWidthOPad(0.845); |
| 428 | padPlane->SetLengthIPad(9.0); |
| 429 | padPlane->SetWidthIPad(0.755); |
| 430 | padPlane->SetTiltingAngle(-kTiltAngle); |
| f162af62 |
431 | break; |
| 432 | case 5: |
| 053767a4 |
433 | if (istack == 2) { |
| f162af62 |
434 | // L5C0 type |
| 435 | padPlane->SetNrows(12); |
| 436 | padPlane->SetLength(108.0); |
| f162af62 |
437 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
438 | } |
| 439 | else { |
| 440 | // L5C1 type |
| 441 | padPlane->SetNrows(16); |
| 442 | padPlane->SetLength(145.0); |
| f162af62 |
443 | padPlane->SetLengthOPad(8.5); |
| f162af62 |
444 | } |
| 59f44727 |
445 | padPlane->SetWidth(114.4); |
| 446 | padPlane->SetWidthOPad(0.965); |
| 447 | padPlane->SetLengthIPad(9.0); |
| 448 | padPlane->SetWidthIPad(0.785); |
| 449 | padPlane->SetTiltingAngle(kTiltAngle); |
| f162af62 |
450 | break; |
| 451 | }; |
| 452 | |
| 453 | // |
| 454 | // The positions of the borders of the pads |
| 455 | // |
| 456 | // Row direction |
| 457 | // |
| 225096c8 |
458 | Double_t row = fgkClength[ilayer][istack] / 2.0 |
| f162af62 |
459 | - fgkRpadW |
| 460 | - padPlane->GetLengthRim(); |
| 461 | for (Int_t ir = 0; ir < padPlane->GetNrows(); ir++) { |
| 462 | padPlane->SetPadRow(ir,row); |
| 463 | row -= padPlane->GetRowSpacing(); |
| 464 | if (ir == 0) { |
| 465 | row -= padPlane->GetLengthOPad(); |
| 466 | } |
| 467 | else { |
| 468 | row -= padPlane->GetLengthIPad(); |
| 469 | } |
| 470 | } |
| 471 | // |
| 472 | // Column direction |
| 473 | // |
| 225096c8 |
474 | Double_t col = - fgkCwidth[ilayer] / 2.0 |
| 023b669c |
475 | - fgkCroW |
| 476 | + padPlane->GetWidthRim(); |
| f162af62 |
477 | for (Int_t ic = 0; ic < padPlane->GetNcols(); ic++) { |
| 478 | padPlane->SetPadCol(ic,col); |
| 023b669c |
479 | col += padPlane->GetColSpacing(); |
| f162af62 |
480 | if (ic == 0) { |
| 023b669c |
481 | col += padPlane->GetWidthOPad(); |
| f162af62 |
482 | } |
| 483 | else { |
| 023b669c |
484 | col += padPlane->GetWidthIPad(); |
| f162af62 |
485 | } |
| 486 | } |
| 487 | // Calculate the offset to translate from the local ROC system into |
| 488 | // the local supermodule system, which is used for clusters |
| 225096c8 |
489 | Double_t rowTmp = fgkClength[ilayer][0] |
| 490 | + fgkClength[ilayer][1] |
| 491 | + fgkClength[ilayer][2] / 2.0; |
| 053767a4 |
492 | for (Int_t jstack = 0; jstack < istack; jstack++) { |
| 225096c8 |
493 | rowTmp -= fgkClength[ilayer][jstack]; |
| f162af62 |
494 | } |
| 225096c8 |
495 | padPlane->SetPadRowSMOffset(rowTmp - fgkClength[ilayer][istack]/2.0); |
| f162af62 |
496 | |
| 497 | return padPlane; |
| 498 | |
| 499 | } |
| 500 | |
| f7336fa3 |
501 | //_____________________________________________________________________________ |
| bd0f8685 |
502 | void AliTRDgeometry::CreateGeometry(Int_t *idtmed) |
| 503 | { |
| 504 | // |
| 053a5ea0 |
505 | // Create the TRD geometry |
| bd0f8685 |
506 | // |
| 507 | // |
| 508 | // Names of the TRD volumina (xx = detector number): |
| 509 | // |
| 053a5ea0 |
510 | // Volume (Air) wrapping the readout chamber components |
| 511 | // UTxx includes: UAxx, UDxx, UFxx, UUxx |
| 512 | // |
| 513 | // Lower part of the readout chambers (drift volume + radiator) |
| 514 | // UAxx Aluminum frames (Al) |
| 515 | // |
| 516 | // Upper part of the readout chambers (readout plane + fee) |
| 517 | // UDxx Wacosit frames of amp. region (Wacosit) |
| 518 | // UFxx Aluminum frame of back panel (Al) |
| 519 | // |
| 520 | // Services on chambers (cooling, cables, MCMs, DCS boards, ...) |
| 521 | // UUxx Volume containing the services (Air) |
| 522 | // |
| 523 | // Material layers inside sensitive area: |
| 524 | // Name Description Mat. Thick. Dens. Radl. X/X_0 |
| 525 | // |
| 526 | // URMYxx Mylar layers (x2) Mylar 0.0015 1.39 28.5464 0.005% |
| 527 | // URCBxx Carbon layer (x2) Carbon 0.0055 1.75 24.2824 0.023% |
| 528 | // URGLxx Glue on the carbon layers (x2) Araldite 0.0065 1.12 37.0664 0.018% |
| 529 | // URRHxx Rohacell layer (x2) Rohacell 0.8 0.075 536.005 0.149% |
| 530 | // URFBxx Fiber mat layer PP 3.186 0.068 649.727 0.490% |
| 531 | // |
| 532 | // UJxx Drift region Xe/CO2 3.0 0.00495 1792.37 0.167% |
| 533 | // UKxx Amplification region Xe/CO2 0.7 0.00495 1792.37 0.039% |
| 534 | // UWxx Wire planes (x2) Copper 0.00011 8.96 1.43503 0.008% |
| 535 | // |
| 536 | // UPPDxx Copper of pad plane Copper 0.0025 8.96 1.43503 0.174% |
| 537 | // UPPPxx PCB of pad plane G10 0.0356 2.0 14.9013 0.239% |
| 538 | // UPGLxx Glue on pad planes Araldite 0.0923 1.12 37.0664 0.249% |
| 539 | // + add. glue (ca. 600g) Araldite 0.0505 1.12 37.0663 0.107% |
| 540 | // UPCBxx Carbon fiber mats (x2) Carbon 0.019 1.75 24.2824 0.078% |
| 541 | // UPHCxx Honeycomb structure Aramide 2.0299 0.032 1198.84 0.169% |
| 542 | // UPPCxx PCB of readout board G10 0.0486 2.0 14.9013 0.326% |
| 543 | // UPRDxx Copper of readout board Copper 0.0057 8.96 1.43503 0.404% |
| 544 | // UPELxx Electronics + cables Copper 0.0029 8.96 1.43503 0.202% |
| bd0f8685 |
545 | // |
| 546 | |
| 547 | const Int_t kNparTrd = 4; |
| 548 | const Int_t kNparCha = 3; |
| 549 | |
| 030b4415 |
550 | Float_t xpos; |
| 551 | Float_t ypos; |
| 552 | Float_t zpos; |
| bd0f8685 |
553 | |
| 554 | Float_t parTrd[kNparTrd]; |
| 555 | Float_t parCha[kNparCha]; |
| 556 | |
| a3f8715e |
557 | Char_t cTagV[100]; |
| 558 | Char_t cTagM[100]; |
| bd0f8685 |
559 | |
| e7014565 |
560 | // There are three TRD volumes for the supermodules in order to accomodate |
| 561 | // the different arrangements in front of PHOS |
| 562 | // UTR1: Default supermodule |
| 563 | // UTR2: Supermodule in front of PHOS with double carbon cover |
| 564 | // UTR3: As UTR2, but w/o middle stack |
| b640260a |
565 | // |
| 566 | // The mother volume for one sector (Air), full length in z-direction |
| bd0f8685 |
567 | // Provides material for side plates of super module |
| 030b4415 |
568 | parTrd[0] = fgkSwidth1/2.0; |
| 569 | parTrd[1] = fgkSwidth2/2.0; |
| 0a5f3331 |
570 | parTrd[2] = fgkSlength/2.0; |
| 030b4415 |
571 | parTrd[3] = fgkSheight/2.0; |
| bd0f8685 |
572 | gMC->Gsvolu("UTR1","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| e7014565 |
573 | gMC->Gsvolu("UTR2","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| 574 | gMC->Gsvolu("UTR3","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| a797f961 |
575 | // The outer aluminum plates of the super module (Al) |
| 030b4415 |
576 | parTrd[0] = fgkSwidth1/2.0; |
| 577 | parTrd[1] = fgkSwidth2/2.0; |
| 0a5f3331 |
578 | parTrd[2] = fgkSlength/2.0; |
| 030b4415 |
579 | parTrd[3] = fgkSheight/2.0; |
| bd0f8685 |
580 | gMC->Gsvolu("UTS1","TRD1",idtmed[1301-1],parTrd,kNparTrd); |
| e7014565 |
581 | gMC->Gsvolu("UTS2","TRD1",idtmed[1301-1],parTrd,kNparTrd); |
| 582 | gMC->Gsvolu("UTS3","TRD1",idtmed[1301-1],parTrd,kNparTrd); |
| bd0f8685 |
583 | // The inner part of the TRD mother volume for one sector (Air), |
| 584 | // full length in z-direction |
| 030b4415 |
585 | parTrd[0] = fgkSwidth1/2.0 - fgkSMpltT; |
| 586 | parTrd[1] = fgkSwidth2/2.0 - fgkSMpltT; |
| 0a5f3331 |
587 | parTrd[2] = fgkSlength/2.0; |
| 030b4415 |
588 | parTrd[3] = fgkSheight/2.0 - fgkSMpltT; |
| bd0f8685 |
589 | gMC->Gsvolu("UTI1","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| e7014565 |
590 | gMC->Gsvolu("UTI2","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| 591 | gMC->Gsvolu("UTI3","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| bd0f8685 |
592 | |
| b640260a |
593 | // The inner part of the TRD mother volume for services in front |
| 594 | // of the supermodules (Air), |
| 595 | parTrd[0] = fgkSwidth1/2.0; |
| 596 | parTrd[1] = fgkSwidth2/2.0; |
| 597 | parTrd[2] = fgkFlength/2.0; |
| 598 | parTrd[3] = fgkSheight/2.0; |
| 599 | gMC->Gsvolu("UTF1","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| 600 | gMC->Gsvolu("UTF2","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| 601 | |
| 053767a4 |
602 | for (Int_t istack = 0; istack < kNstack; istack++) { |
| 603 | for (Int_t ilayer = 0; ilayer < kNlayer; ilayer++) { |
| bd0f8685 |
604 | |
| 053767a4 |
605 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| bd0f8685 |
606 | |
| 0a5f3331 |
607 | // The lower part of the readout chambers (drift volume + radiator) |
| bd0f8685 |
608 | // The aluminum frames |
| 609 | sprintf(cTagV,"UA%02d",iDet); |
| 225096c8 |
610 | parCha[0] = fgkCwidth[ilayer]/2.0; |
| 611 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 030b4415 |
612 | parCha[2] = fgkCraH/2.0 + fgkCdrH/2.0; |
| bd0f8685 |
613 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); |
| 0a5f3331 |
614 | // The additional aluminum on the frames |
| 053a5ea0 |
615 | // This part has not the correct shape but is just supposed to |
| b640260a |
616 | // represent the missing material. The correct form of the L-shaped |
| 0a5f3331 |
617 | // profile would not fit into the alignable volume. |
| 618 | sprintf(cTagV,"UZ%02d",iDet); |
| 053a5ea0 |
619 | parCha[0] = fgkCalWmod/2.0; |
| 225096c8 |
620 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 053a5ea0 |
621 | parCha[2] = fgkCalHmod/2.0; |
| 0a5f3331 |
622 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); |
| 053a5ea0 |
623 | // The additional Wacosit on the frames |
| 624 | sprintf(cTagV,"UP%02d",iDet); |
| 625 | parCha[0] = fgkCwsW/2.0; |
| 225096c8 |
626 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 053a5ea0 |
627 | parCha[2] = fgkCwsH/2.0; |
| 628 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); |
| 0a5f3331 |
629 | // The Wacosit frames |
| bd0f8685 |
630 | sprintf(cTagV,"UB%02d",iDet); |
| 225096c8 |
631 | parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT; |
| 030b4415 |
632 | parCha[1] = -1.0; |
| 633 | parCha[2] = -1.0; |
| bd0f8685 |
634 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); |
| 0a5f3331 |
635 | // The glue around the radiator |
| 636 | sprintf(cTagV,"UX%02d",iDet); |
| 225096c8 |
637 | parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT - fgkCclsT; |
| 638 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCclfT; |
| 0a5f3331 |
639 | parCha[2] = fgkCraH/2.0; |
| 640 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha); |
| 641 | // The inner part of radiator (air) |
| 642 | sprintf(cTagV,"UC%02d",iDet); |
| 225096c8 |
643 | parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT - fgkCclsT - fgkCglT; |
| 644 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCclfT - fgkCglT; |
| 030b4415 |
645 | parCha[2] = -1.0; |
| bd0f8685 |
646 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); |
| 647 | |
| 0a5f3331 |
648 | // The upper part of the readout chambers (amplification volume) |
| 649 | // The Wacosit frames |
| bd0f8685 |
650 | sprintf(cTagV,"UD%02d",iDet); |
| 225096c8 |
651 | parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW; |
| 652 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 030b4415 |
653 | parCha[2] = fgkCamH/2.0; |
| bd0f8685 |
654 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); |
| 0a5f3331 |
655 | // The inner part of the Wacosit frame (air) |
| bd0f8685 |
656 | sprintf(cTagV,"UE%02d",iDet); |
| 225096c8 |
657 | parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW - fgkCcuTb; |
| 658 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCcuTa; |
| bd0f8685 |
659 | parCha[2] = -1.; |
| 660 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); |
| 0a5f3331 |
661 | |
| 053a5ea0 |
662 | // The back panel, including pad plane and readout boards |
| bd0f8685 |
663 | // The aluminum frames |
| 664 | sprintf(cTagV,"UF%02d",iDet); |
| 225096c8 |
665 | parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW; |
| 666 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 030b4415 |
667 | parCha[2] = fgkCroH/2.0; |
| bd0f8685 |
668 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); |
| 669 | // The inner part of the aluminum frames |
| 670 | sprintf(cTagV,"UG%02d",iDet); |
| 225096c8 |
671 | parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW - fgkCauT; |
| 672 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCauT; |
| 030b4415 |
673 | parCha[2] = -1.0; |
| bd0f8685 |
674 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); |
| 675 | |
| 053a5ea0 |
676 | // |
| bd0f8685 |
677 | // The material layers inside the chambers |
| 053a5ea0 |
678 | // |
| 679 | |
| 680 | // Mylar layer (radiator) |
| 681 | parCha[0] = -1.0; |
| 682 | parCha[1] = -1.0; |
| 683 | parCha[2] = fgkRMyThick/2.0; |
| 684 | sprintf(cTagV,"URMY%02d",iDet); |
| 685 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1327-1],parCha,kNparCha); |
| 686 | // Carbon layer (radiator) |
| 687 | parCha[0] = -1.0; |
| 688 | parCha[1] = -1.0; |
| 689 | parCha[2] = fgkRCbThick/2.0; |
| 690 | sprintf(cTagV,"URCB%02d",iDet); |
| 691 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1326-1],parCha,kNparCha); |
| 692 | // Araldite layer (radiator) |
| 693 | parCha[0] = -1.0; |
| 694 | parCha[1] = -1.0; |
| 695 | parCha[2] = fgkRGlThick/2.0; |
| 696 | sprintf(cTagV,"URGL%02d",iDet); |
| 697 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha); |
| 0a5f3331 |
698 | // Rohacell layer (radiator) |
| 030b4415 |
699 | parCha[0] = -1.0; |
| 700 | parCha[1] = -1.0; |
| 053a5ea0 |
701 | parCha[2] = fgkRRhThick/2.0; |
| 702 | sprintf(cTagV,"URRH%02d",iDet); |
| bd0f8685 |
703 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1315-1],parCha,kNparCha); |
| 053a5ea0 |
704 | // Fiber layer (radiator) |
| 705 | parCha[0] = -1.0; |
| 706 | parCha[1] = -1.0; |
| 707 | parCha[2] = fgkRFbThick/2.0; |
| 708 | sprintf(cTagV,"URFB%02d",iDet); |
| 709 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1328-1],parCha,kNparCha); |
| 710 | |
| bd0f8685 |
711 | // Xe/Isobutane layer (drift volume) |
| 225096c8 |
712 | parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT - fgkCclsT; |
| 713 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCclfT; |
| 030b4415 |
714 | parCha[2] = fgkDrThick/2.0; |
| bd0f8685 |
715 | sprintf(cTagV,"UJ%02d",iDet); |
| 716 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha); |
| 053a5ea0 |
717 | |
| bd0f8685 |
718 | // Xe/Isobutane layer (amplification volume) |
| 0a5f3331 |
719 | parCha[0] = -1.0; |
| 720 | parCha[1] = -1.0; |
| 030b4415 |
721 | parCha[2] = fgkAmThick/2.0; |
| bd0f8685 |
722 | sprintf(cTagV,"UK%02d",iDet); |
| 723 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha); |
| 0a5f3331 |
724 | // Cu layer (wire plane) |
| 725 | parCha[0] = -1.0; |
| 726 | parCha[1] = -1.0; |
| 727 | parCha[2] = fgkWrThick/2.0; |
| 728 | sprintf(cTagV,"UW%02d",iDet); |
| 729 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1303-1],parCha,kNparCha); |
| 053a5ea0 |
730 | |
| bd0f8685 |
731 | // Cu layer (pad plane) |
| 0a5f3331 |
732 | parCha[0] = -1.0; |
| 733 | parCha[1] = -1.0; |
| 053a5ea0 |
734 | parCha[2] = fgkPPdThick/2.0; |
| 735 | sprintf(cTagV,"UPPD%02d",iDet); |
| bd0f8685 |
736 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1305-1],parCha,kNparCha); |
| 053a5ea0 |
737 | // G10 layer (pad plane) |
| 0a5f3331 |
738 | parCha[0] = -1.0; |
| 739 | parCha[1] = -1.0; |
| 053a5ea0 |
740 | parCha[2] = fgkPPpThick/2.0; |
| 741 | sprintf(cTagV,"UPPP%02d",iDet); |
| 742 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1313-1],parCha,kNparCha); |
| 743 | // Araldite layer (glue) |
| 744 | parCha[0] = -1.0; |
| 745 | parCha[1] = -1.0; |
| 746 | parCha[2] = fgkPGlThick/2.0; |
| 747 | sprintf(cTagV,"UPGL%02d",iDet); |
| 0a5f3331 |
748 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha); |
| 053a5ea0 |
749 | // Carbon layer (carbon fiber mats) |
| 750 | parCha[0] = -1.0; |
| 751 | parCha[1] = -1.0; |
| 752 | parCha[2] = fgkPCbThick/2.0; |
| 753 | sprintf(cTagV,"UPCB%02d",iDet); |
| 754 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1326-1],parCha,kNparCha); |
| 755 | // Aramide layer (honeycomb) |
| 0a5f3331 |
756 | parCha[0] = -1.0; |
| 757 | parCha[1] = -1.0; |
| 053a5ea0 |
758 | parCha[2] = fgkPHcThick/2.0; |
| 759 | sprintf(cTagV,"UPHC%02d",iDet); |
| 0a5f3331 |
760 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1310-1],parCha,kNparCha); |
| 761 | // G10 layer (PCB readout board) |
| 762 | parCha[0] = -1.0; |
| 763 | parCha[1] = -1.0; |
| 053a5ea0 |
764 | parCha[2] = fgkPPcThick/2; |
| 765 | sprintf(cTagV,"UPPC%02d",iDet); |
| a797f961 |
766 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1313-1],parCha,kNparCha); |
| 0a5f3331 |
767 | // Cu layer (traces in readout board) |
| 768 | parCha[0] = -1.0; |
| 769 | parCha[1] = -1.0; |
| 053a5ea0 |
770 | parCha[2] = fgkPRbThick/2.0; |
| 771 | sprintf(cTagV,"UPRB%02d",iDet); |
| a797f961 |
772 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1306-1],parCha,kNparCha); |
| 053a5ea0 |
773 | // Cu layer (other material on in readout board, incl. screws) |
| 0a5f3331 |
774 | parCha[0] = -1.0; |
| 775 | parCha[1] = -1.0; |
| 053a5ea0 |
776 | parCha[2] = fgkPElThick/2.0; |
| 777 | sprintf(cTagV,"UPEL%02d",iDet); |
| 0a5f3331 |
778 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1304-1],parCha,kNparCha); |
| bd0f8685 |
779 | |
| 053a5ea0 |
780 | // |
| bd0f8685 |
781 | // Position the layers in the chambers |
| 053a5ea0 |
782 | // |
| 030b4415 |
783 | xpos = 0.0; |
| 784 | ypos = 0.0; |
| 053a5ea0 |
785 | |
| bd0f8685 |
786 | // Lower part |
| 053a5ea0 |
787 | // Mylar layers (radiator) |
| 788 | zpos = fgkRMyThick/2.0 - fgkCraH/2.0; |
| 789 | sprintf(cTagV,"URMY%02d",iDet); |
| 790 | sprintf(cTagM,"UC%02d",iDet); |
| 791 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 792 | zpos = -fgkRMyThick/2.0 + fgkCraH/2.0; |
| 793 | sprintf(cTagV,"URMY%02d",iDet); |
| 794 | sprintf(cTagM,"UC%02d",iDet); |
| 795 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 796 | // Carbon layers (radiator) |
| 797 | zpos = fgkRCbThick/2.0 + fgkRMyThick - fgkCraH/2.0; |
| 798 | sprintf(cTagV,"URCB%02d",iDet); |
| 799 | sprintf(cTagM,"UC%02d",iDet); |
| 800 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 801 | zpos = -fgkRCbThick/2.0 - fgkRMyThick + fgkCraH/2.0; |
| 802 | sprintf(cTagV,"URCB%02d",iDet); |
| 803 | sprintf(cTagM,"UC%02d",iDet); |
| 804 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 805 | // Carbon layers (radiator) |
| 806 | zpos = fgkRGlThick/2.0 + fgkRCbThick + fgkRMyThick - fgkCraH/2.0; |
| 807 | sprintf(cTagV,"URGL%02d",iDet); |
| bd0f8685 |
808 | sprintf(cTagM,"UC%02d",iDet); |
| 809 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
810 | zpos = -fgkRGlThick/2.0 - fgkRCbThick - fgkRMyThick + fgkCraH/2.0; |
| 811 | sprintf(cTagV,"URGL%02d",iDet); |
| 812 | sprintf(cTagM,"UC%02d",iDet); |
| 813 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 814 | // Rohacell layers (radiator) |
| 815 | zpos = fgkRRhThick/2.0 + fgkRGlThick + fgkRCbThick + fgkRMyThick - fgkCraH/2.0; |
| 816 | sprintf(cTagV,"URRH%02d",iDet); |
| 817 | sprintf(cTagM,"UC%02d",iDet); |
| 818 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 819 | zpos = -fgkRRhThick/2.0 - fgkRGlThick - fgkRCbThick - fgkRMyThick + fgkCraH/2.0; |
| 820 | sprintf(cTagV,"URRH%02d",iDet); |
| 821 | sprintf(cTagM,"UC%02d",iDet); |
| 822 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 823 | // Fiber layers (radiator) |
| 824 | zpos = 0.0; |
| 825 | sprintf(cTagV,"URFB%02d",iDet); |
| 826 | sprintf(cTagM,"UC%02d",iDet); |
| 827 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 828 | |
| bd0f8685 |
829 | // Xe/Isobutane layer (drift volume) |
| 830 | zpos = fgkDrZpos; |
| 831 | sprintf(cTagV,"UJ%02d",iDet); |
| 0a5f3331 |
832 | sprintf(cTagM,"UB%02d",iDet); |
| bd0f8685 |
833 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
834 | |
| bd0f8685 |
835 | // Upper part |
| 836 | // Xe/Isobutane layer (amplification volume) |
| 837 | zpos = fgkAmZpos; |
| 838 | sprintf(cTagV,"UK%02d",iDet); |
| 839 | sprintf(cTagM,"UE%02d",iDet); |
| 840 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
841 | // Cu layer (wire planes inside amplification volume) |
| 842 | zpos = fgkWrZposA; |
| 0a5f3331 |
843 | sprintf(cTagV,"UW%02d",iDet); |
| 844 | sprintf(cTagM,"UK%02d",iDet); |
| 845 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
846 | zpos = fgkWrZposB; |
| 847 | sprintf(cTagV,"UW%02d",iDet); |
| 848 | sprintf(cTagM,"UK%02d",iDet); |
| 849 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 850 | |
| 851 | // Back panel + pad plane + readout part |
| bd0f8685 |
852 | // Cu layer (pad plane) |
| 053a5ea0 |
853 | zpos = fgkPPdThick/2.0 - fgkCroH/2.0; |
| 854 | sprintf(cTagV,"UPPD%02d",iDet); |
| 855 | sprintf(cTagM,"UG%02d",iDet); |
| 856 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 857 | // G10 layer (pad plane) |
| 858 | zpos = fgkPPpThick/2.0 + fgkPPdThick - fgkCroH/2.0; |
| 859 | sprintf(cTagV,"UPPP%02d",iDet); |
| bd0f8685 |
860 | sprintf(cTagM,"UG%02d",iDet); |
| 861 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
862 | // Araldite layer (glue) |
| 863 | zpos = fgkPGlThick/2.0 + fgkPPpThick + fgkPPdThick - fgkCroH/2.0; |
| 864 | sprintf(cTagV,"UPGL%02d",iDet); |
| 0a5f3331 |
865 | sprintf(cTagM,"UG%02d",iDet); |
| 866 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
867 | // Carbon layers (carbon fiber mats) |
| 868 | zpos = fgkPCbThick/2.0 + fgkPGlThick + fgkPPpThick + fgkPPdThick - fgkCroH/2.0; |
| 869 | sprintf(cTagV,"UPCB%02d",iDet); |
| 870 | sprintf(cTagM,"UG%02d",iDet); |
| 871 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 872 | zpos = -fgkPCbThick/2.0 - fgkPPcThick - fgkPRbThick - fgkPElThick + fgkCroH/2.0; |
| 873 | sprintf(cTagV,"UPCB%02d",iDet); |
| 874 | sprintf(cTagM,"UG%02d",iDet); |
| 875 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 876 | // Aramide layer (honeycomb) |
| 877 | zpos = fgkPHcThick/2.0 + fgkPCbThick + fgkPGlThick + fgkPPpThick + fgkPPdThick - fgkCroH/2.0; |
| 878 | sprintf(cTagV,"UPHC%02d",iDet); |
| bd0f8685 |
879 | sprintf(cTagM,"UG%02d",iDet); |
| 880 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
881 | // G10 layer (PCB readout board) |
| 053a5ea0 |
882 | zpos = -fgkPPcThick/2.0 - fgkPRbThick - fgkPElThick + fgkCroH/2.0; |
| 883 | sprintf(cTagV,"UPPC%02d",iDet); |
| a797f961 |
884 | sprintf(cTagM,"UG%02d",iDet); |
| 885 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
886 | // Cu layer (traces in readout board) |
| 053a5ea0 |
887 | zpos = -fgkPRbThick/2.0 - fgkPElThick + fgkCroH/2.0; |
| 888 | sprintf(cTagV,"UPRB%02d",iDet); |
| a797f961 |
889 | sprintf(cTagM,"UG%02d",iDet); |
| 890 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
891 | // Cu layer (other materials on readout board, incl. screws) |
| 892 | zpos = -fgkPElThick/2.0 + fgkCroH/2.0; |
| 893 | sprintf(cTagV,"UPEL%02d",iDet); |
| 0a5f3331 |
894 | sprintf(cTagM,"UG%02d",iDet); |
| 895 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
896 | |
| 897 | // Position the inner volumes of the chambers in the frames |
| 030b4415 |
898 | xpos = 0.0; |
| 899 | ypos = 0.0; |
| 053a5ea0 |
900 | |
| 901 | // The inner part of the radiator (air) |
| 030b4415 |
902 | zpos = 0.0; |
| bd0f8685 |
903 | sprintf(cTagV,"UC%02d",iDet); |
| 0a5f3331 |
904 | sprintf(cTagM,"UX%02d",iDet); |
| 905 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 906 | // The glue around the radiator |
| 907 | zpos = fgkCraH/2.0 - fgkCdrH/2.0 - fgkCraH/2.0; |
| 908 | sprintf(cTagV,"UX%02d",iDet); |
| bd0f8685 |
909 | sprintf(cTagM,"UB%02d",iDet); |
| 910 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
911 | // The lower Wacosit frame inside the aluminum frame |
| 912 | zpos = 0.0; |
| bd0f8685 |
913 | sprintf(cTagV,"UB%02d",iDet); |
| 914 | sprintf(cTagM,"UA%02d",iDet); |
| 915 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
916 | |
| 0a5f3331 |
917 | // The inside of the upper Wacosit frame |
| 918 | zpos = 0.0; |
| bd0f8685 |
919 | sprintf(cTagV,"UE%02d",iDet); |
| 920 | sprintf(cTagM,"UD%02d",iDet); |
| 921 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
922 | |
| bd0f8685 |
923 | // The inside of the upper aluminum frame |
| 0a5f3331 |
924 | zpos = 0.0; |
| bd0f8685 |
925 | sprintf(cTagV,"UG%02d",iDet); |
| 926 | sprintf(cTagM,"UF%02d",iDet); |
| 927 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 928 | |
| bd0f8685 |
929 | } |
| 930 | } |
| 931 | |
| 932 | // Create the volumes of the super module frame |
| 933 | CreateFrame(idtmed); |
| 934 | |
| 935 | // Create the volumes of the services |
| 936 | CreateServices(idtmed); |
| 937 | |
| 053767a4 |
938 | for (Int_t istack = 0; istack < kNstack; istack++) { |
| 939 | for (Int_t ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 053a5ea0 |
940 | AssembleChamber(ilayer,istack); |
| bd0f8685 |
941 | } |
| 942 | } |
| 943 | |
| 030b4415 |
944 | xpos = 0.0; |
| 945 | ypos = 0.0; |
| 946 | zpos = 0.0; |
| bd0f8685 |
947 | gMC->Gspos("UTI1",1,"UTS1",xpos,ypos,zpos,0,"ONLY"); |
| e7014565 |
948 | gMC->Gspos("UTI2",1,"UTS2",xpos,ypos,zpos,0,"ONLY"); |
| 949 | gMC->Gspos("UTI3",1,"UTS3",xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
950 | |
| 030b4415 |
951 | xpos = 0.0; |
| 952 | ypos = 0.0; |
| 953 | zpos = 0.0; |
| bd0f8685 |
954 | gMC->Gspos("UTS1",1,"UTR1",xpos,ypos,zpos,0,"ONLY"); |
| e7014565 |
955 | gMC->Gspos("UTS2",1,"UTR2",xpos,ypos,zpos,0,"ONLY"); |
| 956 | gMC->Gspos("UTS3",1,"UTR3",xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
957 | |
| 958 | // Put the TRD volumes into the space frame mother volumes |
| 959 | // if enabled via status flag |
| 030b4415 |
960 | xpos = 0.0; |
| 961 | ypos = 0.0; |
| 962 | zpos = 0.0; |
| 053767a4 |
963 | for (Int_t isector = 0; isector < kNsector; isector++) { |
| 5f6f5c22 |
964 | if (GetSMstatus(isector)) { |
| 053767a4 |
965 | sprintf(cTagV,"BTRD%d",isector); |
| 966 | switch (isector) { |
| e7014565 |
967 | case 13: |
| 968 | case 14: |
| 969 | case 15: |
| 970 | // Double carbon, w/o middle stack |
| 971 | gMC->Gspos("UTR3",1,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 972 | break; |
| 973 | case 11: |
| 974 | case 12: |
| 975 | // Double carbon, all stacks |
| 976 | gMC->Gspos("UTR2",1,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 977 | break; |
| 978 | default: |
| 979 | // Standard supermodule |
| 980 | gMC->Gspos("UTR1",1,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 981 | }; |
| bd0f8685 |
982 | } |
| 983 | } |
| 984 | |
| b640260a |
985 | // Put the TRD volumes into the space frame mother volumes |
| 986 | // if enabled via status flag |
| 987 | xpos = 0.0; |
| 988 | ypos = 0.5*fgkSlength + 0.5*fgkFlength; |
| 989 | zpos = 0.0; |
| 053767a4 |
990 | for (Int_t isector = 0; isector < kNsector; isector++) { |
| 5f6f5c22 |
991 | if (GetSMstatus(isector)) { |
| 053767a4 |
992 | sprintf(cTagV,"BTRD%d",isector); |
| b640260a |
993 | gMC->Gspos("UTF1",1,cTagV,xpos, ypos,zpos,0,"ONLY"); |
| 994 | gMC->Gspos("UTF2",1,cTagV,xpos,-ypos,zpos,0,"ONLY"); |
| 995 | } |
| 996 | } |
| 997 | |
| bd0f8685 |
998 | } |
| 999 | |
| 1000 | //_____________________________________________________________________________ |
| 1001 | void AliTRDgeometry::CreateFrame(Int_t *idtmed) |
| 1002 | { |
| 1003 | // |
| 1004 | // Create the geometry of the frame of the supermodule |
| 1005 | // |
| 1006 | // Names of the TRD services volumina |
| 1007 | // |
| 1008 | // USRL Support rails for the chambers (Al) |
| 1009 | // USxx Support cross bars between the chambers (Al) |
| 0a5f3331 |
1010 | // USHx Horizontal connection between the cross bars (Al) |
| 1011 | // USLx Long corner ledges (Al) |
| bd0f8685 |
1012 | // |
| 1013 | |
| 053767a4 |
1014 | Int_t ilayer = 0; |
| bd0f8685 |
1015 | |
| 1016 | Float_t xpos = 0.0; |
| 1017 | Float_t ypos = 0.0; |
| 1018 | Float_t zpos = 0.0; |
| 1019 | |
| a3f8715e |
1020 | Char_t cTagV[100]; |
| 1021 | Char_t cTagM[100]; |
| 0a5f3331 |
1022 | |
| b640260a |
1023 | const Int_t kNparTRD = 4; |
| 1024 | Float_t parTRD[kNparTRD]; |
| 1025 | const Int_t kNparBOX = 3; |
| 1026 | Float_t parBOX[kNparBOX]; |
| 1027 | const Int_t kNparTRP = 11; |
| 1028 | Float_t parTRP[kNparTRP]; |
| 1029 | |
| 0a5f3331 |
1030 | // The rotation matrices |
| 7c0ec5ca |
1031 | const Int_t kNmatrix = 7; |
| 0a5f3331 |
1032 | Int_t matrix[kNmatrix]; |
| 1033 | gMC->Matrix(matrix[0], 100.0, 0.0, 90.0, 90.0, 10.0, 0.0); |
| 1034 | gMC->Matrix(matrix[1], 80.0, 0.0, 90.0, 90.0, 10.0, 180.0); |
| 1035 | gMC->Matrix(matrix[2], 90.0, 0.0, 0.0, 0.0, 90.0, 90.0); |
| 1036 | gMC->Matrix(matrix[3], 90.0, 180.0, 0.0, 180.0, 90.0, 90.0); |
| b640260a |
1037 | gMC->Matrix(matrix[4], 170.0, 0.0, 80.0, 0.0, 90.0, 90.0); |
| 1038 | gMC->Matrix(matrix[5], 170.0, 180.0, 80.0, 180.0, 90.0, 90.0); |
| 1039 | gMC->Matrix(matrix[6], 180.0, 180.0, 90.0, 180.0, 90.0, 90.0); |
| 1040 | |
| 1041 | // |
| 1042 | // The carbon inserts in the top/bottom aluminum plates |
| 1043 | // |
| 1044 | |
| 1045 | const Int_t kNparCrb = 3; |
| 1046 | Float_t parCrb[kNparCrb]; |
| 1047 | parCrb[0] = 0.0; |
| 1048 | parCrb[1] = 0.0; |
| 1049 | parCrb[2] = 0.0; |
| 053a5ea0 |
1050 | gMC->Gsvolu("USCR","BOX ",idtmed[1326-1],parCrb,0); |
| b640260a |
1051 | // Bottom 1 (all sectors) |
| 1052 | parCrb[0] = 77.49/2.0; |
| 1053 | parCrb[1] = 104.60/2.0; |
| 1054 | parCrb[2] = fgkSMpltT/2.0; |
| 1055 | xpos = 0.0; |
| 1056 | ypos = 0.0; |
| 1057 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1058 | gMC->Gsposp("USCR", 1,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1059 | gMC->Gsposp("USCR", 2,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1060 | gMC->Gsposp("USCR", 3,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1061 | // Bottom 2 (all sectors) |
| 1062 | parCrb[0] = 77.49/2.0; |
| 1063 | parCrb[1] = 55.80/2.0; |
| 1064 | parCrb[2] = fgkSMpltT/2.0; |
| 1065 | xpos = 0.0; |
| 1066 | ypos = 85.6; |
| 1067 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1068 | gMC->Gsposp("USCR", 4,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1069 | gMC->Gsposp("USCR", 5,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1070 | gMC->Gsposp("USCR", 6,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1071 | gMC->Gsposp("USCR", 7,"UTS1", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1072 | gMC->Gsposp("USCR", 8,"UTS2", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1073 | gMC->Gsposp("USCR", 9,"UTS3", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1074 | // Bottom 3 (all sectors) |
| 1075 | parCrb[0] = 77.49/2.0; |
| 1076 | parCrb[1] = 56.00/2.0; |
| 1077 | parCrb[2] = fgkSMpltT/2.0; |
| 1078 | xpos = 0.0; |
| 1079 | ypos = 148.5; |
| 1080 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1081 | gMC->Gsposp("USCR",10,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1082 | gMC->Gsposp("USCR",11,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1083 | gMC->Gsposp("USCR",12,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1084 | gMC->Gsposp("USCR",13,"UTS1", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1085 | gMC->Gsposp("USCR",14,"UTS2", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1086 | gMC->Gsposp("USCR",15,"UTS3", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1087 | // Bottom 4 (all sectors) |
| 1088 | parCrb[0] = 77.49/2.0; |
| 1089 | parCrb[1] = 118.00/2.0; |
| 1090 | parCrb[2] = fgkSMpltT/2.0; |
| 1091 | xpos = 0.0; |
| 1092 | ypos = 240.5; |
| 1093 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1094 | gMC->Gsposp("USCR",16,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1095 | gMC->Gsposp("USCR",17,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1096 | gMC->Gsposp("USCR",18,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1097 | gMC->Gsposp("USCR",19,"UTS1", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1098 | gMC->Gsposp("USCR",20,"UTS2", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1099 | gMC->Gsposp("USCR",21,"UTS3", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1100 | // Top 1 (only in front of PHOS) |
| 1101 | parCrb[0] = 111.48/2.0; |
| 1102 | parCrb[1] = 105.00/2.0; |
| 1103 | parCrb[2] = fgkSMpltT/2.0; |
| 1104 | xpos = 0.0; |
| 1105 | ypos = 0.0; |
| 1106 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1107 | gMC->Gsposp("USCR",22,"UTS2", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1108 | gMC->Gsposp("USCR",23,"UTS3", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1109 | // Top 2 (only in front of PHOS) |
| 1110 | parCrb[0] = 111.48/2.0; |
| 1111 | parCrb[1] = 56.00/2.0; |
| 1112 | parCrb[2] = fgkSMpltT/2.0; |
| 1113 | xpos = 0.0; |
| 1114 | ypos = 85.5; |
| 1115 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1116 | gMC->Gsposp("USCR",24,"UTS2", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1117 | gMC->Gsposp("USCR",25,"UTS3", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1118 | gMC->Gsposp("USCR",26,"UTS2", xpos,-ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1119 | gMC->Gsposp("USCR",27,"UTS3", xpos,-ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| bd0f8685 |
1120 | |
| 1121 | // |
| 1122 | // The chamber support rails |
| 1123 | // |
| 1124 | |
| 053a5ea0 |
1125 | const Float_t kSRLhgt = 2.00; |
| 1126 | const Float_t kSRLwidA = 2.3; |
| 1127 | const Float_t kSRLwidB = 1.947; |
| 1128 | const Float_t kSRLdst = 1.135; |
| 1129 | const Int_t kNparSRL = 11; |
| bd0f8685 |
1130 | Float_t parSRL[kNparSRL]; |
| 053a5ea0 |
1131 | // Trapezoidal shape |
| 1132 | parSRL[ 0] = fgkSlength/2.0; |
| 1133 | parSRL[ 1] = 0.0; |
| 1134 | parSRL[ 2] = 0.0; |
| 1135 | parSRL[ 3] = kSRLhgt /2.0; |
| 1136 | parSRL[ 4] = kSRLwidB /2.0; |
| 1137 | parSRL[ 5] = kSRLwidA /2.0; |
| 1138 | parSRL[ 6] = 5.0; |
| 1139 | parSRL[ 7] = kSRLhgt /2.0; |
| 1140 | parSRL[ 8] = kSRLwidB /2.0; |
| 1141 | parSRL[ 9] = kSRLwidA /2.0; |
| 1142 | parSRL[10] = 5.0; |
| 1143 | gMC->Gsvolu("USRL","TRAP",idtmed[1301-1],parSRL,kNparSRL); |
| bd0f8685 |
1144 | |
| 1145 | xpos = 0.0; |
| 1146 | ypos = 0.0; |
| 1147 | zpos = 0.0; |
| 053a5ea0 |
1148 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 225096c8 |
1149 | xpos = fgkCwidth[ilayer]/2.0 + kSRLwidA/2.0 + kSRLdst; |
| bd0f8685 |
1150 | ypos = 0.0; |
| 053a5ea0 |
1151 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos - fgkSheight/2.0 |
| 1152 | + fgkCraH + fgkCdrH - fgkCalH - kSRLhgt/2.0 |
| 053767a4 |
1153 | + ilayer * (fgkCH + fgkVspace); |
| 053a5ea0 |
1154 | gMC->Gspos("USRL",ilayer+1 ,"UTI1", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 1155 | gMC->Gspos("USRL",ilayer+1+ kNlayer,"UTI1",-xpos,ypos,zpos,matrix[3],"ONLY"); |
| 1156 | gMC->Gspos("USRL",ilayer+1+2*kNlayer,"UTI2", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 1157 | gMC->Gspos("USRL",ilayer+1+3*kNlayer,"UTI2",-xpos,ypos,zpos,matrix[3],"ONLY"); |
| 1158 | gMC->Gspos("USRL",ilayer+1+4*kNlayer,"UTI3", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 1159 | gMC->Gspos("USRL",ilayer+1+5*kNlayer,"UTI3",-xpos,ypos,zpos,matrix[3],"ONLY"); |
| bd0f8685 |
1160 | } |
| 1161 | |
| 1162 | // |
| 1163 | // The cross bars between the chambers |
| 1164 | // |
| 1165 | |
| 1166 | const Float_t kSCBwid = 1.0; |
| 0a5f3331 |
1167 | const Float_t kSCBthk = 2.0; |
| 1168 | const Float_t kSCHhgt = 0.3; |
| 1169 | |
| bd0f8685 |
1170 | const Int_t kNparSCB = 3; |
| 1171 | Float_t parSCB[kNparSCB]; |
| 030b4415 |
1172 | parSCB[1] = kSCBwid/2.0; |
| 0a5f3331 |
1173 | parSCB[2] = fgkCH /2.0 + fgkVspace/2.0 - kSCHhgt; |
| 1174 | |
| 1175 | const Int_t kNparSCI = 3; |
| 1176 | Float_t parSCI[kNparSCI]; |
| 1177 | parSCI[1] = -1; |
| bd0f8685 |
1178 | |
| 1179 | xpos = 0.0; |
| 1180 | ypos = 0.0; |
| 1181 | zpos = 0.0; |
| 053767a4 |
1182 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| bd0f8685 |
1183 | |
| 0a5f3331 |
1184 | // The aluminum of the cross bars |
| 225096c8 |
1185 | parSCB[0] = fgkCwidth[ilayer]/2.0 + kSRLdst/2.0; |
| 053767a4 |
1186 | sprintf(cTagV,"USF%01d",ilayer); |
| bd0f8685 |
1187 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parSCB,kNparSCB); |
| bd0f8685 |
1188 | |
| 0a5f3331 |
1189 | // The empty regions in the cross bars |
| 1190 | Float_t thkSCB = kSCBthk; |
| 053767a4 |
1191 | if (ilayer < 2) { |
| 0a5f3331 |
1192 | thkSCB *= 1.5; |
| 1193 | } |
| 1194 | parSCI[2] = parSCB[2] - thkSCB; |
| 1195 | parSCI[0] = parSCB[0]/4.0 - kSCBthk; |
| 053767a4 |
1196 | sprintf(cTagV,"USI%01d",ilayer); |
| 0a5f3331 |
1197 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parSCI,kNparSCI); |
| bd0f8685 |
1198 | |
| 053767a4 |
1199 | sprintf(cTagV,"USI%01d",ilayer); |
| 1200 | sprintf(cTagM,"USF%01d",ilayer); |
| 0a5f3331 |
1201 | ypos = 0.0; |
| 1202 | zpos = 0.0; |
| 1203 | xpos = parSCI[0] + thkSCB/2.0; |
| 1204 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 1205 | xpos = - parSCI[0] - thkSCB/2.0; |
| 1206 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 1207 | xpos = 3.0 * parSCI[0] + 1.5 * thkSCB; |
| 1208 | gMC->Gspos(cTagV,3,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 1209 | xpos = - 3.0 * parSCI[0] - 1.5 * thkSCB; |
| 1210 | gMC->Gspos(cTagV,4,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 1211 | |
| 053767a4 |
1212 | sprintf(cTagV,"USF%01d",ilayer); |
| bd0f8685 |
1213 | xpos = 0.0; |
| 0a5f3331 |
1214 | zpos = fgkVrocsm + fgkSMpltT + parSCB[2] - fgkSheight/2.0 |
| 053767a4 |
1215 | + ilayer * (fgkCH + fgkVspace); |
| 0a5f3331 |
1216 | |
| 225096c8 |
1217 | ypos = fgkClength[ilayer][2]/2.0 + fgkClength[ilayer][1]; |
| b640260a |
1218 | gMC->Gspos(cTagV, 1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 1219 | gMC->Gspos(cTagV, 3,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 1220 | gMC->Gspos(cTagV, 5,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
1221 | |
| 225096c8 |
1222 | ypos = - fgkClength[ilayer][2]/2.0 - fgkClength[ilayer][1]; |
| b640260a |
1223 | gMC->Gspos(cTagV, 2,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 1224 | gMC->Gspos(cTagV, 4,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 1225 | gMC->Gspos(cTagV, 6,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
1226 | |
| 1227 | } |
| 1228 | |
| 1229 | // |
| 1230 | // The horizontal connections between the cross bars |
| 1231 | // |
| 1232 | |
| 1233 | const Int_t kNparSCH = 3; |
| 1234 | Float_t parSCH[kNparSCH]; |
| 1235 | |
| 053767a4 |
1236 | for (ilayer = 1; ilayer < kNlayer-1; ilayer++) { |
| 0a5f3331 |
1237 | |
| 225096c8 |
1238 | parSCH[0] = fgkCwidth[ilayer]/2.0; |
| 1239 | parSCH[1] = (fgkClength[ilayer+1][2]/2.0 + fgkClength[ilayer+1][1] |
| 1240 | - fgkClength[ilayer ][2]/2.0 - fgkClength[ilayer ][1])/2.0; |
| 0a5f3331 |
1241 | parSCH[2] = kSCHhgt/2.0; |
| 1242 | |
| 053767a4 |
1243 | sprintf(cTagV,"USH%01d",ilayer); |
| 0a5f3331 |
1244 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parSCH,kNparSCH); |
| bd0f8685 |
1245 | xpos = 0.0; |
| 225096c8 |
1246 | ypos = fgkClength[ilayer][2]/2.0 + fgkClength[ilayer][1] + parSCH[1]; |
| 0a5f3331 |
1247 | zpos = fgkVrocsm + fgkSMpltT - kSCHhgt/2.0 - fgkSheight/2.0 |
| 053767a4 |
1248 | + (ilayer+1) * (fgkCH + fgkVspace); |
| bd0f8685 |
1249 | gMC->Gspos(cTagV,1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| b640260a |
1250 | gMC->Gspos(cTagV,3,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 1251 | gMC->Gspos(cTagV,5,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
1252 | ypos = -ypos; |
| 1253 | gMC->Gspos(cTagV,2,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| b640260a |
1254 | gMC->Gspos(cTagV,4,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 1255 | gMC->Gspos(cTagV,6,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
1256 | |
| 1257 | } |
| 1258 | |
| b640260a |
1259 | // |
| 1260 | // The aymmetric flat frame in the middle |
| 1261 | // |
| 1262 | |
| 1263 | // The envelope volume (aluminum) |
| 1264 | parTRD[0] = 87.60/2.0; |
| 1265 | parTRD[1] = 114.00/2.0; |
| 1266 | parTRD[2] = 1.20/2.0; |
| 1267 | parTRD[3] = 71.30/2.0; |
| 1268 | gMC->Gsvolu("USDB","TRD1",idtmed[1301-1],parTRD,kNparTRD); |
| 1269 | // Empty spaces (air) |
| 1270 | parTRP[ 0] = 1.20/2.0; |
| 1271 | parTRP[ 1] = 0.0; |
| 1272 | parTRP[ 2] = 0.0; |
| 1273 | parTRP[ 3] = 27.00/2.0; |
| 1274 | parTRP[ 4] = 50.60/2.0; |
| 1275 | parTRP[ 5] = 5.00/2.0; |
| 1276 | parTRP[ 6] = 3.5; |
| 1277 | parTRP[ 7] = 27.00/2.0; |
| 1278 | parTRP[ 8] = 50.60/2.0; |
| 1279 | parTRP[ 9] = 5.00/2.0; |
| 1280 | parTRP[10] = 3.5; |
| 1281 | gMC->Gsvolu("USD1","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1282 | xpos = 18.0; |
| 1283 | ypos = 0.0; |
| 1284 | zpos = 27.00/2.0 - 71.3/2.0; |
| 1285 | gMC->Gspos("USD1",1,"USDB", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1286 | // Empty spaces (air) |
| 1287 | parTRP[ 0] = 1.20/2.0; |
| 1288 | parTRP[ 1] = 0.0; |
| 1289 | parTRP[ 2] = 0.0; |
| 1290 | parTRP[ 3] = 33.00/2.0; |
| 1291 | parTRP[ 4] = 5.00/2.0; |
| 1292 | parTRP[ 5] = 62.10/2.0; |
| 1293 | parTRP[ 6] = 3.5; |
| 1294 | parTRP[ 7] = 33.00/2.0; |
| 1295 | parTRP[ 8] = 5.00/2.0; |
| 1296 | parTRP[ 9] = 62.10/2.0; |
| 1297 | parTRP[10] = 3.5; |
| 1298 | gMC->Gsvolu("USD2","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1299 | xpos = 21.0; |
| 1300 | ypos = 0.0; |
| 1301 | zpos = 71.3/2.0 - 33.0/2.0; |
| 1302 | gMC->Gspos("USD2",1,"USDB", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1303 | // Empty spaces (air) |
| 1304 | parBOX[ 0] = 22.50/2.0; |
| 1305 | parBOX[ 1] = 1.20/2.0; |
| 1306 | parBOX[ 2] = 70.50/2.0; |
| 1307 | gMC->Gsvolu("USD3","BOX ",idtmed[1302-1],parBOX,kNparBOX); |
| 1308 | xpos = -25.75; |
| 1309 | ypos = 0.0; |
| 1310 | zpos = 0.4; |
| 1311 | gMC->Gspos("USD3",1,"USDB", xpos, ypos, zpos, 0,"ONLY"); |
| 1312 | // Empty spaces (air) |
| 1313 | parTRP[ 0] = 1.20/2.0; |
| 1314 | parTRP[ 1] = 0.0; |
| 1315 | parTRP[ 2] = 0.0; |
| 1316 | parTRP[ 3] = 25.50/2.0; |
| 1317 | parTRP[ 4] = 5.00/2.0; |
| 1318 | parTRP[ 5] = 65.00/2.0; |
| 1319 | parTRP[ 6] = -1.0; |
| 1320 | parTRP[ 7] = 25.50/2.0; |
| 1321 | parTRP[ 8] = 5.00/2.0; |
| 1322 | parTRP[ 9] = 65.00/2.0; |
| 1323 | parTRP[10] = -1.0; |
| 1324 | gMC->Gsvolu("USD4","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1325 | xpos = 2.0; |
| 1326 | ypos = 0.0; |
| 1327 | zpos = -1.6; |
| 1328 | gMC->Gspos("USD4",1,"USDB", xpos, ypos, zpos,matrix[6],"ONLY"); |
| 1329 | // Empty spaces (air) |
| 1330 | parTRP[ 0] = 1.20/2.0; |
| 1331 | parTRP[ 1] = 0.0; |
| 1332 | parTRP[ 2] = 0.0; |
| 1333 | parTRP[ 3] = 23.50/2.0; |
| 1334 | parTRP[ 4] = 63.50/2.0; |
| 1335 | parTRP[ 5] = 5.00/2.0; |
| 1336 | parTRP[ 6] = 16.0; |
| 1337 | parTRP[ 7] = 23.50/2.0; |
| 1338 | parTRP[ 8] = 63.50/2.0; |
| 1339 | parTRP[ 9] = 5.00/2.0; |
| 1340 | parTRP[10] = 16.0; |
| 1341 | gMC->Gsvolu("USD5","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1342 | xpos = 36.5; |
| 1343 | ypos = 0.0; |
| 1344 | zpos = -1.5; |
| 1345 | gMC->Gspos("USD5",1,"USDB", xpos, ypos, zpos,matrix[5],"ONLY"); |
| 1346 | // Empty spaces (air) |
| 1347 | parTRP[ 0] = 1.20/2.0; |
| 1348 | parTRP[ 1] = 0.0; |
| 1349 | parTRP[ 2] = 0.0; |
| 1350 | parTRP[ 3] = 70.50/2.0; |
| 1351 | parTRP[ 4] = 4.50/2.0; |
| 1352 | parTRP[ 5] = 16.50/2.0; |
| 1353 | parTRP[ 6] = -5.0; |
| 1354 | parTRP[ 7] = 70.50/2.0; |
| 1355 | parTRP[ 8] = 4.50/2.0; |
| 1356 | parTRP[ 9] = 16.50/2.0; |
| 1357 | parTRP[10] = -5.0; |
| 1358 | gMC->Gsvolu("USD6","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1359 | xpos = -43.7; |
| 1360 | ypos = 0.0; |
| 1361 | zpos = 0.4; |
| 1362 | gMC->Gspos("USD6",1,"USDB", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1363 | xpos = 0.0; |
| 225096c8 |
1364 | ypos = fgkClength[5][2]/2.0; |
| 1e9dad22 |
1365 | zpos = 0.04; |
| b640260a |
1366 | gMC->Gspos("USDB",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1367 | gMC->Gspos("USDB",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1368 | gMC->Gspos("USDB",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1369 | gMC->Gspos("USDB",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1370 | gMC->Gspos("USDB",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1371 | gMC->Gspos("USDB",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1372 | // Upper bar (aluminum) |
| 1373 | parBOX[0] = 95.00/2.0; |
| 1374 | parBOX[1] = 1.20/2.0; |
| 1375 | parBOX[2] = 3.00/2.0; |
| 1376 | gMC->Gsvolu("USD7","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1377 | xpos = 0.0; |
| 225096c8 |
1378 | ypos = fgkClength[5][2]/2.0; |
| 83dd8891 |
1379 | zpos = fgkSheight/2.0 - fgkSMpltT - 3.00/2.0; |
| b640260a |
1380 | gMC->Gspos("USD7",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1381 | gMC->Gspos("USD7",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1382 | gMC->Gspos("USD7",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1383 | gMC->Gspos("USD7",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1384 | gMC->Gspos("USD7",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1385 | gMC->Gspos("USD7",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1386 | // Lower bar (aluminum) |
| 1387 | parBOX[0] = 90.22/2.0; |
| 1388 | parBOX[1] = 1.20/2.0; |
| 9e020f1e |
1389 | parBOX[2] = 1.74/2.0; |
| b640260a |
1390 | gMC->Gsvolu("USD8","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1391 | xpos = 0.0; |
| 225096c8 |
1392 | ypos = fgkClength[5][2]/2.0 - 0.1; |
| 9e020f1e |
1393 | zpos = -fgkSheight/2.0 + fgkSMpltT + 2.27; |
| b640260a |
1394 | gMC->Gspos("USD8",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1395 | gMC->Gspos("USD8",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1396 | gMC->Gspos("USD8",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1397 | gMC->Gspos("USD8",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1398 | gMC->Gspos("USD8",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1399 | gMC->Gspos("USD8",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1400 | // Lower bar (aluminum) |
| 1401 | parBOX[0] = 82.60/2.0; |
| 1402 | parBOX[1] = 1.20/2.0; |
| 1403 | parBOX[2] = 1.40/2.0; |
| 1404 | gMC->Gsvolu("USD9","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1405 | xpos = 0.0; |
| 225096c8 |
1406 | ypos = fgkClength[5][2]/2.0; |
| 83dd8891 |
1407 | zpos = -fgkSheight/2.0 + fgkSMpltT + 1.40/2.0; |
| b640260a |
1408 | gMC->Gspos("USD9",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1409 | gMC->Gspos("USD9",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1410 | gMC->Gspos("USD9",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1411 | gMC->Gspos("USD9",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1412 | gMC->Gspos("USD9",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1413 | gMC->Gspos("USD9",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1414 | // Front sheet (aluminum) |
| 1415 | parTRP[ 0] = 0.10/2.0; |
| 1416 | parTRP[ 1] = 0.0; |
| 1417 | parTRP[ 2] = 0.0; |
| 1418 | parTRP[ 3] = 74.50/2.0; |
| 1419 | parTRP[ 4] = 31.70/2.0; |
| 1420 | parTRP[ 5] = 44.00/2.0; |
| 1421 | parTRP[ 6] = -5.0; |
| 1422 | parTRP[ 7] = 74.50/2.0; |
| 1423 | parTRP[ 8] = 31.70/2.0; |
| 1424 | parTRP[ 9] = 44.00/2.0; |
| 1425 | parTRP[10] = -5.0; |
| 1426 | gMC->Gsvolu("USDF","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1427 | xpos = -32.0; |
| 225096c8 |
1428 | ypos = fgkClength[5][2]/2.0 + 1.20/2.0 + 0.10/2.0; |
| b640260a |
1429 | zpos = 0.0; |
| 1430 | gMC->Gspos("USDF",1,"UTI1", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1431 | gMC->Gspos("USDF",2,"UTI1", xpos,-ypos, zpos,matrix[2],"ONLY"); |
| 1432 | gMC->Gspos("USDF",3,"UTI2", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1433 | gMC->Gspos("USDF",4,"UTI2", xpos,-ypos, zpos,matrix[2],"ONLY"); |
| 1434 | gMC->Gspos("USDF",5,"UTI3", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1435 | gMC->Gspos("USDF",6,"UTI3", xpos,-ypos, zpos,matrix[2],"ONLY"); |
| 1436 | |
| 1437 | // |
| 1438 | // The flat frame in front of the chambers |
| 1439 | // |
| 1440 | |
| 1441 | // The envelope volume (aluminum) |
| 24eb93fd |
1442 | parTRD[0] = 90.00/2.0 - 0.1; |
| 1443 | parTRD[1] = 114.00/2.0 - 0.1; |
| b640260a |
1444 | parTRD[2] = 1.50/2.0; |
| 1445 | parTRD[3] = 70.30/2.0; |
| 1446 | gMC->Gsvolu("USCB","TRD1",idtmed[1301-1],parTRD,kNparTRD); |
| 1447 | // Empty spaces (air) |
| 1448 | parTRD[0] = 87.00/2.0; |
| 1449 | parTRD[1] = 10.00/2.0; |
| 1450 | parTRD[2] = 1.50/2.0; |
| 1451 | parTRD[3] = 26.35/2.0; |
| 1452 | gMC->Gsvolu("USC1","TRD1",idtmed[1302-1],parTRD,kNparTRD); |
| 1453 | xpos = 0.0; |
| 1454 | ypos = 0.0; |
| 1455 | zpos = 26.35/2.0 - 70.3/2.0; |
| 1456 | gMC->Gspos("USC1",1,"USCB",xpos,ypos,zpos,0,"ONLY"); |
| 1457 | // Empty spaces (air) |
| 1458 | parTRD[0] = 10.00/2.0; |
| 1459 | parTRD[1] = 111.00/2.0; |
| 1460 | parTRD[2] = 1.50/2.0; |
| 1461 | parTRD[3] = 35.05/2.0; |
| 1462 | gMC->Gsvolu("USC2","TRD1",idtmed[1302-1],parTRD,kNparTRD); |
| 1463 | xpos = 0.0; |
| 1464 | ypos = 0.0; |
| 1465 | zpos = 70.3/2.0 - 35.05/2.0; |
| 1466 | gMC->Gspos("USC2",1,"USCB",xpos,ypos,zpos,0,"ONLY"); |
| 1467 | // Empty spaces (air) |
| 1468 | parTRP[ 0] = 1.50/2.0; |
| 1469 | parTRP[ 1] = 0.0; |
| 1470 | parTRP[ 2] = 0.0; |
| 1471 | parTRP[ 3] = 37.60/2.0; |
| 1472 | parTRP[ 4] = 63.90/2.0; |
| 1473 | parTRP[ 5] = 8.86/2.0; |
| 1474 | parTRP[ 6] = 16.0; |
| 1475 | parTRP[ 7] = 37.60/2.0; |
| 1476 | parTRP[ 8] = 63.90/2.0; |
| 1477 | parTRP[ 9] = 8.86/2.0; |
| 1478 | parTRP[10] = 16.0; |
| 1479 | gMC->Gsvolu("USC3","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1480 | xpos = -30.5; |
| 1481 | ypos = 0.0; |
| 1482 | zpos = -2.0; |
| 1483 | gMC->Gspos("USC3",1,"USCB", xpos, ypos, zpos,matrix[4],"ONLY"); |
| 1484 | gMC->Gspos("USC3",2,"USCB",-xpos, ypos, zpos,matrix[5],"ONLY"); |
| 1485 | xpos = 0.0; |
| 225096c8 |
1486 | ypos = fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0]; |
| b640260a |
1487 | zpos = 0.0; |
| 1488 | gMC->Gspos("USCB",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1489 | gMC->Gspos("USCB",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1490 | gMC->Gspos("USCB",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1491 | gMC->Gspos("USCB",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1492 | gMC->Gspos("USCB",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1493 | gMC->Gspos("USCB",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1494 | // Upper bar (aluminum) |
| 1495 | parBOX[0] = 95.00/2.0; |
| 1496 | parBOX[1] = 1.50/2.0; |
| 1497 | parBOX[2] = 3.00/2.0; |
| 1498 | gMC->Gsvolu("USC4","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1499 | xpos = 0.0; |
| 225096c8 |
1500 | ypos = fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0]; |
| 83dd8891 |
1501 | zpos = fgkSheight/2.0 - fgkSMpltT - 3.00/2.0; |
| b640260a |
1502 | gMC->Gspos("USC4",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1503 | gMC->Gspos("USC4",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1504 | gMC->Gspos("USC4",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1505 | gMC->Gspos("USC4",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1506 | gMC->Gspos("USC4",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1507 | gMC->Gspos("USC4",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1508 | // Lower bar (aluminum) |
| 1509 | parBOX[0] = 90.22/2.0; |
| 1510 | parBOX[1] = 1.50/2.0; |
| 9e020f1e |
1511 | parBOX[2] = 2.00/2.0; |
| b640260a |
1512 | gMC->Gsvolu("USC5","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1513 | xpos = 0.0; |
| 225096c8 |
1514 | ypos = fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0]; |
| 9e020f1e |
1515 | zpos = -fgkSheight/2.0 + fgkSMpltT + 2.60; |
| b640260a |
1516 | gMC->Gspos("USC5",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1517 | gMC->Gspos("USC5",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1518 | gMC->Gspos("USC5",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1519 | gMC->Gspos("USC5",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1520 | gMC->Gspos("USC5",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1521 | gMC->Gspos("USC5",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1522 | // Lower bar (aluminum) |
| 1523 | parBOX[0] = 82.60/2.0; |
| 1524 | parBOX[1] = 1.50/2.0; |
| 1525 | parBOX[2] = 1.60/2.0; |
| 1526 | gMC->Gsvolu("USC6","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1527 | xpos = 0.0; |
| 225096c8 |
1528 | ypos = fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0]; |
| 83dd8891 |
1529 | zpos = -fgkSheight/2.0 + fgkSMpltT + 1.60/2.0; |
| b640260a |
1530 | gMC->Gspos("USC6",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1531 | gMC->Gspos("USC6",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1532 | gMC->Gspos("USC6",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1533 | gMC->Gspos("USC6",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1534 | gMC->Gspos("USC6",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1535 | gMC->Gspos("USC6",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1536 | |
| 0a5f3331 |
1537 | // |
| 1538 | // The long corner ledges |
| 1539 | // |
| 1540 | |
| 1541 | const Int_t kNparSCL = 3; |
| 1542 | Float_t parSCL[kNparSCL]; |
| 1543 | const Int_t kNparSCLb = 11; |
| 1544 | Float_t parSCLb[kNparSCLb]; |
| 1545 | |
| 1546 | // Upper ledges |
| 1547 | // Thickness of the corner ledges |
| 1548 | const Float_t kSCLthkUa = 0.6; |
| 1549 | const Float_t kSCLthkUb = 0.6; |
| 1550 | // Width of the corner ledges |
| 1551 | const Float_t kSCLwidUa = 3.2; |
| 1552 | const Float_t kSCLwidUb = 4.8; |
| 1553 | // Position of the corner ledges |
| 1554 | const Float_t kSCLposxUa = 0.7; |
| 1555 | const Float_t kSCLposxUb = 3.3; |
| dc9d308d |
1556 | const Float_t kSCLposzUa = 1.65; |
| 0a5f3331 |
1557 | const Float_t kSCLposzUb = 0.3; |
| 1558 | // Vertical |
| 1559 | parSCL[0] = kSCLthkUa /2.0; |
| 1560 | parSCL[1] = fgkSlength/2.0; |
| 1561 | parSCL[2] = kSCLwidUa /2.0; |
| 1562 | gMC->Gsvolu("USL1","BOX ",idtmed[1301-1],parSCL,kNparSCL); |
| 1563 | xpos = fgkSwidth2/2.0 - fgkSMpltT - kSCLposxUa; |
| 1564 | ypos = 0.0; |
| 1565 | zpos = fgkSheight/2.0 - fgkSMpltT - kSCLposzUa; |
| 1566 | gMC->Gspos("USL1",1,"UTI1", xpos,ypos,zpos,matrix[0],"ONLY"); |
| 1567 | xpos = -xpos; |
| 1568 | gMC->Gspos("USL1",2,"UTI1", xpos,ypos,zpos,matrix[1],"ONLY"); |
| 1569 | // Horizontal |
| 1570 | parSCL[0] = kSCLwidUb /2.0; |
| 1571 | parSCL[1] = fgkSlength/2.0; |
| 1572 | parSCL[2] = kSCLthkUb /2.0; |
| 1573 | gMC->Gsvolu("USL2","BOX ",idtmed[1301-1],parSCL,kNparSCL); |
| 1574 | xpos = fgkSwidth2/2.0 - fgkSMpltT - kSCLposxUb; |
| 1575 | ypos = 0.0; |
| 1576 | zpos = fgkSheight/2.0 - fgkSMpltT - kSCLposzUb; |
| 1577 | gMC->Gspos("USL2",1,"UTI1", xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
1578 | gMC->Gspos("USL2",3,"UTI2", xpos,ypos,zpos, 0,"ONLY"); |
| 1579 | gMC->Gspos("USL2",5,"UTI3", xpos,ypos,zpos, 0,"ONLY"); |
| 0a5f3331 |
1580 | xpos = -xpos; |
| 1581 | gMC->Gspos("USL2",2,"UTI1", xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
1582 | gMC->Gspos("USL2",4,"UTI2", xpos,ypos,zpos, 0,"ONLY"); |
| 1583 | gMC->Gspos("USL2",6,"UTI3", xpos,ypos,zpos, 0,"ONLY"); |
| 0a5f3331 |
1584 | |
| 1585 | // Lower ledges |
| 1586 | // Thickness of the corner ledges |
| 1587 | const Float_t kSCLthkLa = 2.464; |
| 1588 | const Float_t kSCLthkLb = 1.0; |
| 1589 | // Width of the corner ledges |
| 053a5ea0 |
1590 | const Float_t kSCLwidLa = 8.3; |
| 1591 | const Float_t kSCLwidLb = 4.0; |
| 0a5f3331 |
1592 | // Position of the corner ledges |
| 053a5ea0 |
1593 | const Float_t kSCLposxLa = (3.0 * kSCLthkLb - kSCLthkLa) / 4.0 + 0.05; |
| 1594 | const Float_t kSCLposxLb = kSCLthkLb + kSCLwidLb/2.0 + 0.05; |
| 1595 | const Float_t kSCLposzLa = kSCLwidLa/2.0; |
| 1596 | const Float_t kSCLposzLb = kSCLthkLb/2.0; |
| 0a5f3331 |
1597 | // Vertical |
| 1598 | // Trapezoidal shape |
| 1599 | parSCLb[ 0] = fgkSlength/2.0; |
| 1600 | parSCLb[ 1] = 0.0; |
| 1601 | parSCLb[ 2] = 0.0; |
| 1602 | parSCLb[ 3] = kSCLwidLa /2.0; |
| 1603 | parSCLb[ 4] = kSCLthkLb /2.0; |
| 1604 | parSCLb[ 5] = kSCLthkLa /2.0; |
| 1605 | parSCLb[ 6] = 5.0; |
| 1606 | parSCLb[ 7] = kSCLwidLa /2.0; |
| 1607 | parSCLb[ 8] = kSCLthkLb /2.0; |
| 1608 | parSCLb[ 9] = kSCLthkLa /2.0; |
| 1609 | parSCLb[10] = 5.0; |
| 1610 | gMC->Gsvolu("USL3","TRAP",idtmed[1301-1],parSCLb,kNparSCLb); |
| 1611 | xpos = fgkSwidth1/2.0 - fgkSMpltT - kSCLposxLa; |
| 1612 | ypos = 0.0; |
| 053a5ea0 |
1613 | zpos = - fgkSheight/2.0 + fgkSMpltT + kSCLposzLa; |
| 0a5f3331 |
1614 | gMC->Gspos("USL3",1,"UTI1", xpos,ypos,zpos,matrix[2],"ONLY"); |
| b640260a |
1615 | gMC->Gspos("USL3",3,"UTI2", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 1616 | gMC->Gspos("USL3",5,"UTI3", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 0a5f3331 |
1617 | xpos = -xpos; |
| 1618 | gMC->Gspos("USL3",2,"UTI1", xpos,ypos,zpos,matrix[3],"ONLY"); |
| b640260a |
1619 | gMC->Gspos("USL3",4,"UTI2", xpos,ypos,zpos,matrix[3],"ONLY"); |
| 1620 | gMC->Gspos("USL3",6,"UTI3", xpos,ypos,zpos,matrix[3],"ONLY"); |
| 053a5ea0 |
1621 | // Horizontal part |
| 0a5f3331 |
1622 | parSCL[0] = kSCLwidLb /2.0; |
| 1623 | parSCL[1] = fgkSlength/2.0; |
| 1624 | parSCL[2] = kSCLthkLb /2.0; |
| 1625 | gMC->Gsvolu("USL4","BOX ",idtmed[1301-1],parSCL,kNparSCL); |
| 1626 | xpos = fgkSwidth1/2.0 - fgkSMpltT - kSCLposxLb; |
| 1627 | ypos = 0.0; |
| 053a5ea0 |
1628 | zpos = - fgkSheight/2.0 + fgkSMpltT + kSCLposzLb; |
| 0a5f3331 |
1629 | gMC->Gspos("USL4",1,"UTI1", xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
1630 | gMC->Gspos("USL4",3,"UTI2", xpos,ypos,zpos, 0,"ONLY"); |
| 1631 | gMC->Gspos("USL4",5,"UTI3", xpos,ypos,zpos, 0,"ONLY"); |
| 0a5f3331 |
1632 | xpos = -xpos; |
| 1633 | gMC->Gspos("USL4",2,"UTI1", xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
1634 | gMC->Gspos("USL4",4,"UTI2", xpos,ypos,zpos, 0,"ONLY"); |
| 1635 | gMC->Gspos("USL4",6,"UTI3", xpos,ypos,zpos, 0,"ONLY"); |
| 1636 | |
| 1637 | // |
| 1638 | // Aluminum plates in the front part of the super modules |
| 1639 | // |
| 1640 | |
| 1641 | const Int_t kNparTrd = 4; |
| 1642 | Float_t parTrd[kNparTrd]; |
| 1643 | parTrd[0] = fgkSwidth1/2.0 - 2.5; |
| 1644 | parTrd[1] = fgkSwidth2/2.0 - 2.5; |
| 1645 | parTrd[2] = fgkSMpltT /2.0; |
| 1646 | parTrd[3] = fgkSheight/2.0 - 1.0; |
| 1647 | gMC->Gsvolu("UTA1","TRD1",idtmed[1301-1],parTrd,kNparTrd); |
| 1648 | xpos = 0.0; |
| 1649 | ypos = fgkSMpltT/2.0 - fgkFlength/2.0; |
| 1650 | zpos = -0.5; |
| 1651 | gMC->Gspos("UTA1",1,"UTF1",xpos, ypos,zpos, 0,"ONLY"); |
| 1652 | gMC->Gspos("UTA1",2,"UTF2",xpos,-ypos,zpos, 0,"ONLY"); |
| 1653 | |
| 1654 | const Int_t kNparPlt = 3; |
| 1655 | Float_t parPlt[kNparPlt]; |
| 1656 | parPlt[0] = 0.0; |
| 1657 | parPlt[1] = 0.0; |
| 1658 | parPlt[2] = 0.0; |
| 1659 | gMC->Gsvolu("UTA2","BOX ",idtmed[1301-1],parPlt,0); |
| 1660 | xpos = 0.0; |
| 1661 | ypos = 0.0; |
| 1662 | zpos = fgkSheight/2.0 - fgkSMpltT/2.0; |
| dc9d308d |
1663 | parPlt[0] = fgkSwidth2/2.0 - 0.2; |
| b640260a |
1664 | parPlt[1] = fgkFlength/2.0; |
| 1665 | parPlt[2] = fgkSMpltT /2.0; |
| 1666 | gMC->Gsposp("UTA2",1,"UTF2",xpos,ypos,zpos |
| 1667 | , 0,"ONLY",parPlt,kNparPlt); |
| babcf76e |
1668 | xpos = (fgkSwidth1 + fgkSwidth2)/4.0 - fgkSMpltT/2.0 - 0.0016; |
| b640260a |
1669 | ypos = 0.0; |
| 1670 | zpos = 0.0; |
| 1671 | parPlt[0] = fgkSMpltT /2.0; |
| 1672 | parPlt[1] = fgkFlength/2.0; |
| 1673 | parPlt[2] = fgkSheight/2.0; |
| 1674 | gMC->Gsposp("UTA2",2,"UTF2", xpos,ypos,zpos |
| 1675 | ,matrix[0],"ONLY",parPlt,kNparPlt); |
| 1676 | gMC->Gsposp("UTA2",3,"UTF2",-xpos,ypos,zpos |
| 1677 | ,matrix[1],"ONLY",parPlt,kNparPlt); |
| 0a5f3331 |
1678 | |
| 9bf8c575 |
1679 | // Additional aluminum bar |
| 1680 | parBOX[0] = 80.0/2.0; |
| 1681 | parBOX[1] = 1.0/2.0; |
| 1682 | parBOX[2] = 10.0/2.0; |
| 1683 | gMC->Gsvolu("UTA3","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1684 | xpos = 0.0; |
| 1685 | ypos = 1.0/2.0 + fgkSMpltT - fgkFlength/2.0; |
| 1686 | zpos = fgkSheight/2.0 - 1.5 - 10.0/2.0; |
| 1687 | gMC->Gspos("UTA3",1,"UTF1", xpos, ypos, zpos, 0,"ONLY"); |
| 1688 | gMC->Gspos("UTA3",2,"UTF2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1689 | |
| bd0f8685 |
1690 | } |
| 1691 | |
| 1692 | //_____________________________________________________________________________ |
| 1693 | void AliTRDgeometry::CreateServices(Int_t *idtmed) |
| 1694 | { |
| 1695 | // |
| 1696 | // Create the geometry of the services |
| 1697 | // |
| 1698 | // Names of the TRD services volumina |
| 1699 | // |
| b640260a |
1700 | // UTC1 Cooling arterias (Al) |
| 1701 | // UTC2 Cooling arterias (Water) |
| bd0f8685 |
1702 | // UUxx Volumes for the services at the chambers (Air) |
| 053a5ea0 |
1703 | // UMCM Readout MCMs (G10/Cu/Si) |
| 1704 | // UDCS DCSs boards (G10/Cu) |
| b640260a |
1705 | // UTP1 Power bars (Cu) |
| 0a5f3331 |
1706 | // UTCP Cooling pipes (Fe) |
| bd0f8685 |
1707 | // UTCH Cooling pipes (Water) |
| 1708 | // UTPL Power lines (Cu) |
| b640260a |
1709 | // UTGD Gas distribution box (V2A) |
| bd0f8685 |
1710 | // |
| 1711 | |
| 053767a4 |
1712 | Int_t ilayer = 0; |
| 1713 | Int_t istack = 0; |
| bd0f8685 |
1714 | |
| 1715 | Float_t xpos = 0.0; |
| 1716 | Float_t ypos = 0.0; |
| 1717 | Float_t zpos = 0.0; |
| 1718 | |
| a3f8715e |
1719 | Char_t cTagV[100]; |
| bd0f8685 |
1720 | |
| b640260a |
1721 | const Int_t kNparBox = 3; |
| 1722 | Float_t parBox[kNparBox]; |
| 1723 | |
| 1724 | const Int_t kNparTube = 3; |
| 1725 | Float_t parTube[kNparTube]; |
| 1726 | |
| 10df4d39 |
1727 | // Services inside the baby frame |
| 1728 | const Float_t kBBMdz = 223.0; |
| 1729 | const Float_t kBBSdz = 8.5; |
| 1730 | |
| 1731 | // Services inside the back frame |
| 1732 | const Float_t kBFMdz = 118.0; |
| 1733 | const Float_t kBFSdz = 8.5; |
| 1734 | |
| bd0f8685 |
1735 | // The rotation matrices |
| 10df4d39 |
1736 | const Int_t kNmatrix = 10; |
| bd0f8685 |
1737 | Int_t matrix[kNmatrix]; |
| 10df4d39 |
1738 | gMC->Matrix(matrix[0], 100.0, 0.0, 90.0, 90.0, 10.0, 0.0); // rotation around y-axis |
| 1739 | gMC->Matrix(matrix[1], 80.0, 0.0, 90.0, 90.0, 10.0, 180.0); // rotation around y-axis |
| 030b4415 |
1740 | gMC->Matrix(matrix[2], 0.0, 0.0, 90.0, 90.0, 90.0, 0.0); |
| 99ed5146 |
1741 | gMC->Matrix(matrix[3], 180.0, 0.0, 90.0, 90.0, 90.0, 180.0); |
| b640260a |
1742 | gMC->Matrix(matrix[4], 90.0, 0.0, 0.0, 0.0, 90.0, 90.0); |
| 1743 | gMC->Matrix(matrix[5], 100.0, 0.0, 90.0, 270.0, 10.0, 0.0); |
| 1744 | gMC->Matrix(matrix[6], 80.0, 0.0, 90.0, 270.0, 10.0, 180.0); |
| 10df4d39 |
1745 | gMC->Matrix(matrix[7], 90.0, 10.0, 90.0, 100.0, 0.0, 0.0); // rotation around z-axis |
| 1746 | gMC->Matrix(matrix[8], 90.0, 350.0, 90.0, 80.0, 0.0, 0.0); // rotation around z-axis |
| 1747 | gMC->Matrix(matrix[9], 90.0, 90.0, 90.0, 180.0, 0.0, 0.0); // rotation around z-axis |
| bd0f8685 |
1748 | |
| 1749 | // |
| 1750 | // The cooling arterias |
| 1751 | // |
| 1752 | |
| 1753 | // Width of the cooling arterias |
| 0a5f3331 |
1754 | const Float_t kCOLwid = 0.8; |
| bd0f8685 |
1755 | // Height of the cooling arterias |
| 0a5f3331 |
1756 | const Float_t kCOLhgt = 6.5; |
| bd0f8685 |
1757 | // Positioning of the cooling |
| 053a5ea0 |
1758 | const Float_t kCOLposx = 1.0; |
| 1759 | const Float_t kCOLposz = -1.2; |
| bd0f8685 |
1760 | // Thickness of the walls of the cooling arterias |
| 1761 | const Float_t kCOLthk = 0.1; |
| 030b4415 |
1762 | const Int_t kNparCOL = 3; |
| bd0f8685 |
1763 | Float_t parCOL[kNparCOL]; |
| b640260a |
1764 | parCOL[0] = 0.0; |
| 1765 | parCOL[1] = 0.0; |
| 1766 | parCOL[2] = 0.0; |
| 1767 | gMC->Gsvolu("UTC1","BOX ",idtmed[1308-1],parCOL,0); |
| 1768 | gMC->Gsvolu("UTC3","BOX ",idtmed[1308-1],parCOL,0); |
| 1769 | parCOL[0] = kCOLwid/2.0 - kCOLthk; |
| 1770 | parCOL[1] = -1.0; |
| 1771 | parCOL[2] = kCOLhgt/2.0 - kCOLthk; |
| 1772 | gMC->Gsvolu("UTC2","BOX ",idtmed[1314-1],parCOL,kNparCOL); |
| 1773 | gMC->Gsvolu("UTC4","BOX ",idtmed[1314-1],parCOL,kNparCOL); |
| bd0f8685 |
1774 | |
| 1775 | xpos = 0.0; |
| 1776 | ypos = 0.0; |
| 1777 | zpos = 0.0; |
| b640260a |
1778 | gMC->Gspos("UTC2",1,"UTC1", xpos,ypos,zpos,0,"ONLY"); |
| 1779 | gMC->Gspos("UTC4",1,"UTC3", xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
1780 | |
| 053767a4 |
1781 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 99ed5146 |
1782 | |
| b640260a |
1783 | // Along the chambers |
| 225096c8 |
1784 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx; |
| b640260a |
1785 | ypos = 0.0; |
| 053a5ea0 |
1786 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1787 | + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz |
| 053767a4 |
1788 | + ilayer * (fgkCH + fgkVspace); |
| b640260a |
1789 | parCOL[0] = kCOLwid /2.0; |
| 1790 | parCOL[1] = fgkSlength/2.0; |
| 1791 | parCOL[2] = kCOLhgt /2.0; |
| 053767a4 |
1792 | gMC->Gsposp("UTC1",ilayer ,"UTI1", xpos,ypos,zpos |
| b640260a |
1793 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1794 | gMC->Gsposp("UTC1",ilayer+ kNlayer,"UTI1",-xpos,ypos,zpos |
| b640260a |
1795 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1796 | gMC->Gsposp("UTC1",ilayer+6*kNlayer,"UTI2", xpos,ypos,zpos |
| b640260a |
1797 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1798 | gMC->Gsposp("UTC1",ilayer+7*kNlayer,"UTI2",-xpos,ypos,zpos |
| b640260a |
1799 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1800 | gMC->Gsposp("UTC1",ilayer+8*kNlayer ,"UTI3", xpos,ypos,zpos |
| b640260a |
1801 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1802 | gMC->Gsposp("UTC1",ilayer+9*kNlayer,"UTI3",-xpos,ypos,zpos |
| b640260a |
1803 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 1804 | |
| 1805 | // Front of supermodules |
| 225096c8 |
1806 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx; |
| b640260a |
1807 | ypos = 0.0; |
| 053a5ea0 |
1808 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1809 | + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz |
| 053767a4 |
1810 | + ilayer * (fgkCH + fgkVspace); |
| b640260a |
1811 | parCOL[0] = kCOLwid /2.0; |
| 1812 | parCOL[1] = fgkFlength/2.0; |
| 1813 | parCOL[2] = kCOLhgt /2.0; |
| 053767a4 |
1814 | gMC->Gsposp("UTC3",ilayer+2*kNlayer,"UTF1", xpos,ypos,zpos |
| b640260a |
1815 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1816 | gMC->Gsposp("UTC3",ilayer+3*kNlayer,"UTF1",-xpos,ypos,zpos |
| b640260a |
1817 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1818 | gMC->Gsposp("UTC3",ilayer+4*kNlayer,"UTF2", xpos,ypos,zpos |
| b640260a |
1819 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1820 | gMC->Gsposp("UTC3",ilayer+5*kNlayer,"UTF2",-xpos,ypos,zpos |
| b640260a |
1821 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 99ed5146 |
1822 | |
| bd0f8685 |
1823 | } |
| 1824 | |
| 053767a4 |
1825 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 10df4d39 |
1826 | |
| 1827 | // In baby frame |
| 225096c8 |
1828 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx - 2.5; |
| 10df4d39 |
1829 | ypos = kBBSdz/2.0 - kBBMdz/2.0; |
| 053a5ea0 |
1830 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1831 | + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz |
| 053767a4 |
1832 | + ilayer * (fgkCH + fgkVspace); |
| 10df4d39 |
1833 | parCOL[0] = kCOLwid/2.0; |
| 1834 | parCOL[1] = kBBSdz /2.0; |
| 1835 | parCOL[2] = kCOLhgt/2.0; |
| 053767a4 |
1836 | gMC->Gsposp("UTC3",ilayer+6*kNlayer,"BBTRD", xpos, ypos, zpos |
| 10df4d39 |
1837 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1838 | gMC->Gsposp("UTC3",ilayer+7*kNlayer,"BBTRD",-xpos, ypos, zpos |
| 10df4d39 |
1839 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 1840 | |
| 1841 | } |
| 1842 | |
| 053767a4 |
1843 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 10df4d39 |
1844 | |
| 1845 | // In back frame |
| 225096c8 |
1846 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx - 0.3; |
| 10df4d39 |
1847 | ypos = -kBFSdz/2.0 + kBFMdz/2.0; |
| 053a5ea0 |
1848 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1849 | + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz |
| 053767a4 |
1850 | + ilayer * (fgkCH + fgkVspace); |
| 10df4d39 |
1851 | parCOL[0] = kCOLwid/2.0; |
| 1852 | parCOL[1] = kBFSdz /2.0; |
| 1853 | parCOL[2] = kCOLhgt/2.0; |
| 053767a4 |
1854 | gMC->Gsposp("UTC3",ilayer+6*kNlayer,"BFTRD", xpos,ypos,zpos |
| 10df4d39 |
1855 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1856 | gMC->Gsposp("UTC3",ilayer+7*kNlayer,"BFTRD",-xpos,ypos,zpos |
| 10df4d39 |
1857 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 1858 | |
| 1859 | } |
| 1860 | |
| 053a5ea0 |
1861 | // The upper most layer |
| b640260a |
1862 | // Along the chambers |
| 225096c8 |
1863 | xpos = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3; |
| b640260a |
1864 | ypos = 0.0; |
| 1865 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0; |
| 1866 | parCOL[0] = kCOLwid /2.0; |
| 1867 | parCOL[1] = fgkSlength/2.0; |
| 1868 | parCOL[2] = kCOLhgt /2.0; |
| 053767a4 |
1869 | gMC->Gsposp("UTC1",6 ,"UTI1", xpos,ypos,zpos |
| b640260a |
1870 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1871 | gMC->Gsposp("UTC1",6+ kNlayer,"UTI1",-xpos,ypos,zpos |
| b640260a |
1872 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1873 | gMC->Gsposp("UTC1",6+6*kNlayer,"UTI2", xpos,ypos,zpos |
| b640260a |
1874 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1875 | gMC->Gsposp("UTC1",6+7*kNlayer,"UTI2",-xpos,ypos,zpos |
| b640260a |
1876 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1877 | gMC->Gsposp("UTC1",6+8*kNlayer,"UTI3", xpos,ypos,zpos |
| b640260a |
1878 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1879 | gMC->Gsposp("UTC1",6+9*kNlayer,"UTI3",-xpos,ypos,zpos |
| b640260a |
1880 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 1881 | // Front of supermodules |
| 225096c8 |
1882 | xpos = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3; |
| b640260a |
1883 | ypos = 0.0; |
| 1884 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0; |
| 1885 | parCOL[0] = kCOLwid /2.0; |
| 1886 | parCOL[1] = fgkFlength/2.0; |
| 1887 | parCOL[2] = kCOLhgt /2.0; |
| 053767a4 |
1888 | gMC->Gsposp("UTC3",6+2*kNlayer,"UTF1", xpos,ypos,zpos |
| b640260a |
1889 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1890 | gMC->Gsposp("UTC3",6+3*kNlayer,"UTF1",-xpos,ypos,zpos |
| b640260a |
1891 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1892 | gMC->Gsposp("UTC3",6+4*kNlayer,"UTF2", xpos,ypos,zpos |
| b640260a |
1893 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1894 | gMC->Gsposp("UTC3",6+5*kNlayer,"UTF2",-xpos,ypos,zpos |
| b640260a |
1895 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 10df4d39 |
1896 | // In baby frame |
| 225096c8 |
1897 | xpos = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 3.1; |
| 10df4d39 |
1898 | ypos = kBBSdz/2.0 - kBBMdz/2.0; |
| 1899 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0; |
| 1900 | parCOL[0] = kCOLwid/2.0; |
| 1901 | parCOL[1] = kBBSdz /2.0; |
| 1902 | parCOL[2] = kCOLhgt/2.0; |
| 053767a4 |
1903 | gMC->Gsposp("UTC3",6+6*kNlayer,"BBTRD", xpos, ypos, zpos |
| 10df4d39 |
1904 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1905 | gMC->Gsposp("UTC3",6+7*kNlayer,"BBTRD",-xpos, ypos, zpos |
| 10df4d39 |
1906 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 1907 | // In back frame |
| 225096c8 |
1908 | xpos = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3; |
| 10df4d39 |
1909 | ypos = -kBFSdz/2.0 + kBFMdz/2.0; |
| 1910 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0; |
| 1911 | parCOL[0] = kCOLwid/2.0; |
| 1912 | parCOL[1] = kBFSdz /2.0; |
| 1913 | parCOL[2] = kCOLhgt/2.0; |
| 053767a4 |
1914 | gMC->Gsposp("UTC3",6+6*kNlayer,"BFTRD", xpos,ypos,zpos |
| 10df4d39 |
1915 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1916 | gMC->Gsposp("UTC3",6+7*kNlayer,"BFTRD",-xpos,ypos,zpos |
| 10df4d39 |
1917 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 99ed5146 |
1918 | |
| bd0f8685 |
1919 | // |
| 053a5ea0 |
1920 | // The power bus bars |
| bd0f8685 |
1921 | // |
| 1922 | |
| 1923 | const Float_t kPWRwid = 0.6; |
| 053a5ea0 |
1924 | // Increase the height of the power bus bars to take into |
| 1925 | // account the material of additional cables, etc. |
| 1926 | const Float_t kPWRhgtA = 5.0 + 0.2; |
| 1927 | const Float_t kPWRhgtB = 5.0; |
| 1928 | const Float_t kPWRposx = 2.0; |
| 1929 | const Float_t kPWRposz = 0.1; |
| 030b4415 |
1930 | const Int_t kNparPWR = 3; |
| bd0f8685 |
1931 | Float_t parPWR[kNparPWR]; |
| b640260a |
1932 | parPWR[0] = 0.0; |
| 1933 | parPWR[1] = 0.0; |
| 1934 | parPWR[2] = 0.0; |
| 1935 | gMC->Gsvolu("UTP1","BOX ",idtmed[1325-1],parPWR,0); |
| 1936 | gMC->Gsvolu("UTP3","BOX ",idtmed[1325-1],parPWR,0); |
| bd0f8685 |
1937 | |
| 053767a4 |
1938 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| b640260a |
1939 | |
| 1940 | // Along the chambers |
| 225096c8 |
1941 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx; |
| b640260a |
1942 | ypos = 0.0; |
| 053a5ea0 |
1943 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1944 | + kPWRhgtA/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
1945 | + ilayer * (fgkCH + fgkVspace); |
| b640260a |
1946 | parPWR[0] = kPWRwid /2.0; |
| 1947 | parPWR[1] = fgkSlength/2.0; |
| 053a5ea0 |
1948 | parPWR[2] = kPWRhgtA /2.0; |
| 053767a4 |
1949 | gMC->Gsposp("UTP1",ilayer ,"UTI1", xpos,ypos,zpos |
| b640260a |
1950 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1951 | gMC->Gsposp("UTP1",ilayer+ kNlayer,"UTI1",-xpos,ypos,zpos |
| b640260a |
1952 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1953 | gMC->Gsposp("UTP1",ilayer+6*kNlayer,"UTI2", xpos,ypos,zpos |
| b640260a |
1954 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1955 | gMC->Gsposp("UTP1",ilayer+7*kNlayer,"UTI2",-xpos,ypos,zpos |
| b640260a |
1956 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1957 | gMC->Gsposp("UTP1",ilayer+8*kNlayer,"UTI3", xpos,ypos,zpos |
| b640260a |
1958 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1959 | gMC->Gsposp("UTP1",ilayer+9*kNlayer,"UTI3",-xpos,ypos,zpos |
| b640260a |
1960 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 1961 | |
| 1962 | // Front of supermodule |
| 225096c8 |
1963 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx; |
| b640260a |
1964 | ypos = 0.0; |
| 053a5ea0 |
1965 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1966 | + kPWRhgtA/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
1967 | + ilayer * (fgkCH + fgkVspace); |
| b640260a |
1968 | parPWR[0] = kPWRwid /2.0; |
| 1969 | parPWR[1] = fgkFlength/2.0; |
| 053a5ea0 |
1970 | parPWR[2] = kPWRhgtA /2.0; |
| 053767a4 |
1971 | gMC->Gsposp("UTP3",ilayer+2*kNlayer,"UTF1", xpos,ypos,zpos |
| b640260a |
1972 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1973 | gMC->Gsposp("UTP3",ilayer+3*kNlayer,"UTF1",-xpos,ypos,zpos |
| b640260a |
1974 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1975 | gMC->Gsposp("UTP3",ilayer+4*kNlayer,"UTF2", xpos,ypos,zpos |
| b640260a |
1976 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1977 | gMC->Gsposp("UTP3",ilayer+5*kNlayer,"UTF2",-xpos,ypos,zpos |
| b640260a |
1978 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| bd0f8685 |
1979 | |
| 1980 | } |
| 1981 | |
| 053767a4 |
1982 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 10df4d39 |
1983 | |
| 1984 | // In baby frame |
| 225096c8 |
1985 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx - 2.5; |
| 10df4d39 |
1986 | ypos = kBBSdz/2.0 - kBBMdz/2.0; |
| 053a5ea0 |
1987 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1988 | + kPWRhgtB/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
1989 | + ilayer * (fgkCH + fgkVspace); |
| 053a5ea0 |
1990 | parPWR[0] = kPWRwid /2.0; |
| 1991 | parPWR[1] = kBBSdz /2.0; |
| 1992 | parPWR[2] = kPWRhgtB/2.0; |
| 053767a4 |
1993 | gMC->Gsposp("UTP3",ilayer+6*kNlayer,"BBTRD", xpos, ypos, zpos |
| 10df4d39 |
1994 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1995 | gMC->Gsposp("UTP3",ilayer+7*kNlayer,"BBTRD",-xpos, ypos, zpos |
| 10df4d39 |
1996 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 1997 | |
| 1998 | } |
| 1999 | |
| 053767a4 |
2000 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 10df4d39 |
2001 | |
| 2002 | // In back frame |
| 225096c8 |
2003 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx - 0.3; |
| 10df4d39 |
2004 | ypos = -kBFSdz/2.0 + kBFMdz/2.0; |
| 053a5ea0 |
2005 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 2006 | + kPWRhgtB/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
2007 | + ilayer * (fgkCH + fgkVspace); |
| 053a5ea0 |
2008 | parPWR[0] = kPWRwid /2.0; |
| 2009 | parPWR[1] = kBFSdz /2.0; |
| 2010 | parPWR[2] = kPWRhgtB/2.0; |
| 053767a4 |
2011 | gMC->Gsposp("UTP3",ilayer+8*kNlayer,"BFTRD", xpos,ypos,zpos |
| 10df4d39 |
2012 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2013 | gMC->Gsposp("UTP3",ilayer+9*kNlayer,"BFTRD",-xpos,ypos,zpos |
| 10df4d39 |
2014 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 2015 | |
| 2016 | } |
| 2017 | |
| 2018 | // The upper most layer |
| b640260a |
2019 | // Along the chambers |
| 225096c8 |
2020 | xpos = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 1.3; |
| 4ba1d6ae |
2021 | ypos = 0.0; |
| 2022 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0; |
| b640260a |
2023 | parPWR[0] = kPWRwid /2.0; |
| 2024 | parPWR[1] = fgkSlength/2.0; |
| 053a5ea0 |
2025 | parPWR[2] = kPWRhgtB /2.0 ; |
| 053767a4 |
2026 | gMC->Gsposp("UTP1",6 ,"UTI1", xpos,ypos,zpos |
| b640260a |
2027 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2028 | gMC->Gsposp("UTP1",6+ kNlayer,"UTI1",-xpos,ypos,zpos |
| b640260a |
2029 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2030 | gMC->Gsposp("UTP1",6+6*kNlayer,"UTI2", xpos,ypos,zpos |
| b640260a |
2031 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2032 | gMC->Gsposp("UTP1",6+7*kNlayer,"UTI2",-xpos,ypos,zpos |
| b640260a |
2033 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2034 | gMC->Gsposp("UTP1",6+8*kNlayer,"UTI3", xpos,ypos,zpos |
| b640260a |
2035 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2036 | gMC->Gsposp("UTP1",6+9*kNlayer,"UTI3",-xpos,ypos,zpos |
| b640260a |
2037 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 2038 | // Front of supermodules |
| 225096c8 |
2039 | xpos = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 1.3; |
| b640260a |
2040 | ypos = 0.0; |
| 2041 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0; |
| 2042 | parPWR[0] = kPWRwid /2.0; |
| 2043 | parPWR[1] = fgkFlength/2.0; |
| 053a5ea0 |
2044 | parPWR[2] = kPWRhgtB /2.0; |
| 053767a4 |
2045 | gMC->Gsposp("UTP3",6+2*kNlayer,"UTF1", xpos,ypos,zpos |
| b640260a |
2046 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2047 | gMC->Gsposp("UTP3",6+3*kNlayer,"UTF1",-xpos,ypos,zpos |
| b640260a |
2048 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2049 | gMC->Gsposp("UTP3",6+4*kNlayer,"UTF2", xpos,ypos,zpos |
| b640260a |
2050 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2051 | gMC->Gsposp("UTP3",6+5*kNlayer,"UTF2",-xpos,ypos,zpos |
| b640260a |
2052 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 10df4d39 |
2053 | // In baby frame |
| 225096c8 |
2054 | xpos = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 3.0; |
| 10df4d39 |
2055 | ypos = kBBSdz/2.0 - kBBMdz/2.0; |
| 2056 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0; |
| 053a5ea0 |
2057 | parPWR[0] = kPWRwid /2.0; |
| 2058 | parPWR[1] = kBBSdz /2.0; |
| 2059 | parPWR[2] = kPWRhgtB/2.0; |
| 053767a4 |
2060 | gMC->Gsposp("UTP3",6+6*kNlayer,"BBTRD", xpos, ypos, zpos |
| 10df4d39 |
2061 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2062 | gMC->Gsposp("UTP3",6+7*kNlayer,"BBTRD",-xpos, ypos, zpos |
| 10df4d39 |
2063 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 2064 | // In back frame |
| 225096c8 |
2065 | xpos = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 1.3; |
| 10df4d39 |
2066 | ypos = -kBFSdz/2.0 + kBFMdz/2.0; |
| 2067 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0; |
| 053a5ea0 |
2068 | parPWR[0] = kPWRwid /2.0; |
| 2069 | parPWR[1] = kBFSdz /2.0; |
| 2070 | parPWR[2] = kPWRhgtB/2.0; |
| 053767a4 |
2071 | gMC->Gsposp("UTP3",6+8*kNlayer,"BFTRD", xpos,ypos,zpos |
| 10df4d39 |
2072 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2073 | gMC->Gsposp("UTP3",6+9*kNlayer,"BFTRD",-xpos,ypos,zpos |
| 10df4d39 |
2074 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| b640260a |
2075 | |
| 2076 | // |
| 2077 | // The gas tubes connecting the chambers in the super modules with holes |
| f73d8692 |
2078 | // Material: Stainless steel |
| b640260a |
2079 | // |
| 2080 | |
| 2081 | parTube[0] = 0.0; |
| 2082 | parTube[1] = 2.2/2.0; |
| 225096c8 |
2083 | parTube[2] = fgkClength[5][2]/2.0 - fgkHspace/2.0; |
| f73d8692 |
2084 | gMC->Gsvolu("UTG1","TUBE",idtmed[1308-1],parTube,kNparTube); |
| b640260a |
2085 | parTube[0] = 0.0; |
| f73d8692 |
2086 | parTube[1] = 2.1/2.0; |
| 225096c8 |
2087 | parTube[2] = fgkClength[5][2]/2.0 - fgkHspace/2.0; |
| b640260a |
2088 | gMC->Gsvolu("UTG2","TUBE",idtmed[1309-1],parTube,kNparTube); |
| 2089 | xpos = 0.0; |
| 99ed5146 |
2090 | ypos = 0.0; |
| b640260a |
2091 | zpos = 0.0; |
| 2092 | gMC->Gspos("UTG2",1,"UTG1",xpos,ypos,zpos,0,"ONLY"); |
| 053767a4 |
2093 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 225096c8 |
2094 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 - 1.5; |
| b640260a |
2095 | ypos = 0.0; |
| 2096 | zpos = fgkVrocsm + fgkSMpltT + kCOLhgt/2.0 - fgkSheight/2.0 + 5.0 |
| 053767a4 |
2097 | + ilayer * (fgkCH + fgkVspace); |
| 2098 | gMC->Gspos("UTG1",1+ilayer,"UTI3", xpos, ypos, zpos,matrix[4],"ONLY"); |
| 2099 | gMC->Gspos("UTG1",7+ilayer,"UTI3",-xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2100 | } |
| 99ed5146 |
2101 | |
| bd0f8685 |
2102 | // |
| 2103 | // The volumes for the services at the chambers |
| 2104 | // |
| 2105 | |
| 2106 | const Int_t kNparServ = 3; |
| 2107 | Float_t parServ[kNparServ]; |
| 2108 | |
| 053767a4 |
2109 | for (istack = 0; istack < kNstack; istack++) { |
| 2110 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| bd0f8685 |
2111 | |
| 053767a4 |
2112 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| bd0f8685 |
2113 | |
| 2114 | sprintf(cTagV,"UU%02d",iDet); |
| 225096c8 |
2115 | parServ[0] = fgkCwidth[ilayer] /2.0; |
| 2116 | parServ[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 053a5ea0 |
2117 | parServ[2] = fgkCsvH /2.0; |
| bd0f8685 |
2118 | gMC->Gsvolu(cTagV,"BOX",idtmed[1302-1],parServ,kNparServ); |
| a797f961 |
2119 | |
| bd0f8685 |
2120 | } |
| 2121 | } |
| 2122 | |
| 2123 | // |
| 2124 | // The cooling pipes inside the service volumes |
| 2125 | // |
| 2126 | |
| 0a5f3331 |
2127 | // The cooling pipes |
| e7014565 |
2128 | parTube[0] = 0.0; |
| 2129 | parTube[1] = 0.0; |
| 2130 | parTube[2] = 0.0; |
| bd0f8685 |
2131 | gMC->Gsvolu("UTCP","TUBE",idtmed[1324-1],parTube,0); |
| 2132 | // The cooling water |
| 2133 | parTube[0] = 0.0; |
| 030b4415 |
2134 | parTube[1] = 0.2/2.0; |
| e7014565 |
2135 | parTube[2] = -1.0; |
| bd0f8685 |
2136 | gMC->Gsvolu("UTCH","TUBE",idtmed[1314-1],parTube,kNparTube); |
| 2137 | // Water inside the cooling pipe |
| 2138 | xpos = 0.0; |
| 2139 | ypos = 0.0; |
| 2140 | zpos = 0.0; |
| 2141 | gMC->Gspos("UTCH",1,"UTCP",xpos,ypos,zpos,0,"ONLY"); |
| 2142 | |
| 2143 | // Position the cooling pipes in the mother volume |
| 053767a4 |
2144 | for (istack = 0; istack < kNstack; istack++) { |
| 2145 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2146 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2147 | Int_t iCopy = GetDetector(ilayer,istack,0) * 100; |
| 2148 | Int_t nMCMrow = GetRowMax(ilayer,istack,0); |
| 2149 | Float_t ySize = (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| bd0f8685 |
2150 | / ((Float_t) nMCMrow); |
| 2151 | sprintf(cTagV,"UU%02d",iDet); |
| 2152 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { |
| 2153 | xpos = 0.0; |
| 053a5ea0 |
2154 | ypos = (0.5 + iMCMrow) * ySize |
| 225096c8 |
2155 | - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0; |
| 030b4415 |
2156 | zpos = 0.0 + 0.742/2.0; |
| e7014565 |
2157 | // The cooling pipes |
| b640260a |
2158 | parTube[0] = 0.0; |
| 2159 | parTube[1] = 0.3/2.0; // Thickness of the cooling pipes |
| 225096c8 |
2160 | parTube[2] = fgkCwidth[ilayer]/2.0; |
| bd0f8685 |
2161 | gMC->Gsposp("UTCP",iCopy+iMCMrow,cTagV,xpos,ypos,zpos |
| b640260a |
2162 | ,matrix[2],"ONLY",parTube,kNparTube); |
| bd0f8685 |
2163 | } |
| 2164 | } |
| 2165 | } |
| 2166 | |
| 2167 | // |
| 2168 | // The power lines |
| 2169 | // |
| 2170 | |
| 2171 | // The copper power lines |
| 2172 | parTube[0] = 0.0; |
| 2173 | parTube[1] = 0.0; |
| 2174 | parTube[2] = 0.0; |
| 2175 | gMC->Gsvolu("UTPL","TUBE",idtmed[1305-1],parTube,0); |
| 2176 | |
| 2177 | // Position the power lines in the mother volume |
| 053767a4 |
2178 | for (istack = 0; istack < kNstack; istack++) { |
| 2179 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2180 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2181 | Int_t iCopy = GetDetector(ilayer,istack,0) * 100; |
| 2182 | Int_t nMCMrow = GetRowMax(ilayer,istack,0); |
| 2183 | Float_t ySize = (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| bd0f8685 |
2184 | / ((Float_t) nMCMrow); |
| 2185 | sprintf(cTagV,"UU%02d",iDet); |
| 2186 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { |
| b640260a |
2187 | xpos = 0.0; |
| 2188 | ypos = (0.5 + iMCMrow) * ySize - 1.0 |
| 225096c8 |
2189 | - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0; |
| b640260a |
2190 | zpos = -0.4 + 0.742/2.0; |
| 2191 | parTube[0] = 0.0; |
| 2192 | parTube[1] = 0.2/2.0; // Thickness of the power lines |
| 225096c8 |
2193 | parTube[2] = fgkCwidth[ilayer]/2.0; |
| bd0f8685 |
2194 | gMC->Gsposp("UTPL",iCopy+iMCMrow,cTagV,xpos,ypos,zpos |
| b640260a |
2195 | ,matrix[2],"ONLY",parTube,kNparTube); |
| bd0f8685 |
2196 | } |
| 2197 | } |
| 2198 | } |
| 2199 | |
| 2200 | // |
| 2201 | // The MCMs |
| 2202 | // |
| 2203 | |
| 1f766e4b |
2204 | const Float_t kMCMx = 3.0; |
| 2205 | const Float_t kMCMy = 3.0; |
| 2206 | const Float_t kMCMz = 0.3; |
| 2207 | |
| 2208 | const Float_t kMCMpcTh = 0.1; |
| 2209 | const Float_t kMCMcuTh = 0.0025; |
| 2210 | const Float_t kMCMsiTh = 0.03; |
| 2211 | const Float_t kMCMcoTh = 0.04; |
| 0a5f3331 |
2212 | |
| bd0f8685 |
2213 | // The mother volume for the MCMs (air) |
| 2214 | const Int_t kNparMCM = 3; |
| 2215 | Float_t parMCM[kNparMCM]; |
| 0a5f3331 |
2216 | parMCM[0] = kMCMx /2.0; |
| 2217 | parMCM[1] = kMCMy /2.0; |
| 2218 | parMCM[2] = kMCMz /2.0; |
| bd0f8685 |
2219 | gMC->Gsvolu("UMCM","BOX",idtmed[1302-1],parMCM,kNparMCM); |
| 2220 | |
| 2221 | // The MCM carrier G10 layer |
| 0a5f3331 |
2222 | parMCM[0] = kMCMx /2.0; |
| 2223 | parMCM[1] = kMCMy /2.0; |
| 2224 | parMCM[2] = kMCMpcTh/2.0; |
| bd0f8685 |
2225 | gMC->Gsvolu("UMC1","BOX",idtmed[1319-1],parMCM,kNparMCM); |
| 2226 | // The MCM carrier Cu layer |
| 0a5f3331 |
2227 | parMCM[0] = kMCMx /2.0; |
| 2228 | parMCM[1] = kMCMy /2.0; |
| 2229 | parMCM[2] = kMCMcuTh/2.0; |
| bd0f8685 |
2230 | gMC->Gsvolu("UMC2","BOX",idtmed[1318-1],parMCM,kNparMCM); |
| 2231 | // The silicon of the chips |
| 0a5f3331 |
2232 | parMCM[0] = kMCMx /2.0; |
| 2233 | parMCM[1] = kMCMy /2.0; |
| 2234 | parMCM[2] = kMCMsiTh/2.0; |
| bd0f8685 |
2235 | gMC->Gsvolu("UMC3","BOX",idtmed[1320-1],parMCM,kNparMCM); |
| 0a5f3331 |
2236 | // The aluminum of the cooling plates |
| 2237 | parMCM[0] = kMCMx /2.0; |
| 2238 | parMCM[1] = kMCMy /2.0; |
| 2239 | parMCM[2] = kMCMcoTh/2.0; |
| 2240 | gMC->Gsvolu("UMC4","BOX",idtmed[1324-1],parMCM,kNparMCM); |
| bd0f8685 |
2241 | |
| 2242 | // Put the MCM material inside the MCM mother volume |
| 2243 | xpos = 0.0; |
| 2244 | ypos = 0.0; |
| 0a5f3331 |
2245 | zpos = -kMCMz /2.0 + kMCMpcTh/2.0; |
| bd0f8685 |
2246 | gMC->Gspos("UMC1",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
2247 | zpos += kMCMpcTh/2.0 + kMCMcuTh/2.0; |
| bd0f8685 |
2248 | gMC->Gspos("UMC2",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
2249 | zpos += kMCMcuTh/2.0 + kMCMsiTh/2.0; |
| bd0f8685 |
2250 | gMC->Gspos("UMC3",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
2251 | zpos += kMCMsiTh/2.0 + kMCMcoTh/2.0; |
| 2252 | gMC->Gspos("UMC4",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
2253 | |
| 2254 | // Position the MCMs in the mother volume |
| 053767a4 |
2255 | for (istack = 0; istack < kNstack; istack++) { |
| 2256 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2257 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2258 | Int_t iCopy = GetDetector(ilayer,istack,0) * 1000; |
| 2259 | Int_t nMCMrow = GetRowMax(ilayer,istack,0); |
| 023b669c |
2260 | Float_t ySize = (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| bd0f8685 |
2261 | / ((Float_t) nMCMrow); |
| 2262 | Int_t nMCMcol = 8; |
| 053767a4 |
2263 | Float_t xSize = (GetChamberWidth(ilayer) - 2.0*fgkCpadW) |
| 023b669c |
2264 | / ((Float_t) nMCMcol + 6); // Introduce 6 gaps |
| 2265 | Int_t iMCM[8] = { 1, 2, 3, 5, 8, 9, 10, 12 }; // 0..7 MCM + 6 gap structure |
| bd0f8685 |
2266 | sprintf(cTagV,"UU%02d",iDet); |
| 2267 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { |
| 2268 | for (Int_t iMCMcol = 0; iMCMcol < nMCMcol; iMCMcol++) { |
| 023b669c |
2269 | xpos = (0.5 + iMCM[iMCMcol]) * xSize + 1.0 |
| 225096c8 |
2270 | - fgkCwidth[ilayer]/2.0; |
| 023b669c |
2271 | ypos = (0.5 + iMCMrow) * ySize + 1.0 |
| 225096c8 |
2272 | - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0; |
| b640260a |
2273 | zpos = -0.4 + 0.742/2.0; |
| bd0f8685 |
2274 | gMC->Gspos("UMCM",iCopy+iMCMrow*10+iMCMcol,cTagV |
| 2275 | ,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
2276 | // Add two additional smaller cooling pipes on top of the MCMs |
| 2277 | // to mimic the meandering structure |
| 2278 | xpos = (0.5 + iMCM[iMCMcol]) * xSize + 1.0 |
| 225096c8 |
2279 | - fgkCwidth[ilayer]/2.0; |
| 053a5ea0 |
2280 | ypos = (0.5 + iMCMrow) * ySize |
| 225096c8 |
2281 | - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0; |
| 053a5ea0 |
2282 | zpos = 0.0 + 0.742/2.0; |
| 2283 | parTube[0] = 0.0; |
| 2284 | parTube[1] = 0.3/2.0; // Thickness of the cooling pipes |
| 2285 | parTube[2] = kMCMx/2.0; |
| 2286 | gMC->Gsposp("UTCP",iCopy+iMCMrow*10+iMCMcol+ 50,cTagV |
| 2287 | ,xpos,ypos+1.0,zpos |
| 2288 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 2289 | gMC->Gsposp("UTCP",iCopy+iMCMrow*10+iMCMcol+500,cTagV |
| 2290 | ,xpos,ypos+2.0,zpos |
| 2291 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 2292 | |
| 023b669c |
2293 | } |
| bd0f8685 |
2294 | } |
| 2295 | |
| 2296 | } |
| 2297 | } |
| 2298 | |
| 053a5ea0 |
2299 | // |
| 2300 | // The DCS boards |
| 2301 | // |
| 2302 | |
| 2303 | const Float_t kDCSx = 9.0; |
| 2304 | const Float_t kDCSy = 14.5; |
| 2305 | const Float_t kDCSz = 0.3; |
| 2306 | |
| 2307 | const Float_t kDCSpcTh = 0.15; |
| 2308 | const Float_t kDCScuTh = 0.01; |
| 2309 | const Float_t kDCScoTh = 0.04; |
| 2310 | |
| 2311 | // The mother volume for the DCSs (air) |
| 2312 | const Int_t kNparDCS = 3; |
| 2313 | Float_t parDCS[kNparDCS]; |
| 2314 | parDCS[0] = kDCSx /2.0; |
| 2315 | parDCS[1] = kDCSy /2.0; |
| 2316 | parDCS[2] = kDCSz /2.0; |
| 2317 | gMC->Gsvolu("UDCS","BOX",idtmed[1302-1],parDCS,kNparDCS); |
| 2318 | |
| 2319 | // The DCS carrier G10 layer |
| 2320 | parDCS[0] = kDCSx /2.0; |
| 2321 | parDCS[1] = kDCSy /2.0; |
| 2322 | parDCS[2] = kDCSpcTh/2.0; |
| 2323 | gMC->Gsvolu("UDC1","BOX",idtmed[1319-1],parDCS,kNparDCS); |
| 2324 | // The DCS carrier Cu layer |
| 2325 | parDCS[0] = kDCSx /2.0; |
| 2326 | parDCS[1] = kDCSy /2.0; |
| 2327 | parDCS[2] = kDCScuTh/2.0; |
| 2328 | gMC->Gsvolu("UDC2","BOX",idtmed[1318-1],parDCS,kNparDCS); |
| 2329 | // The aluminum of the cooling plates |
| 075abeb7 |
2330 | parDCS[0] = 5.0 /2.0; |
| 2331 | parDCS[1] = 5.0 /2.0; |
| 053a5ea0 |
2332 | parDCS[2] = kDCScoTh/2.0; |
| 2333 | gMC->Gsvolu("UDC3","BOX",idtmed[1324-1],parDCS,kNparDCS); |
| 2334 | |
| 2335 | // Put the DCS material inside the DCS mother volume |
| 2336 | xpos = 0.0; |
| 2337 | ypos = 0.0; |
| 2338 | zpos = -kDCSz /2.0 + kDCSpcTh/2.0; |
| 2339 | gMC->Gspos("UDC1",1,"UDCS",xpos,ypos,zpos,0,"ONLY"); |
| 2340 | zpos += kDCSpcTh/2.0 + kDCScuTh/2.0; |
| 2341 | gMC->Gspos("UDC2",1,"UDCS",xpos,ypos,zpos,0,"ONLY"); |
| 2342 | zpos += kDCScuTh/2.0 + kDCScoTh/2.0; |
| 2343 | gMC->Gspos("UDC3",1,"UDCS",xpos,ypos,zpos,0,"ONLY"); |
| 2344 | |
| 2345 | // Put the DCS board in the chamber services mother volume |
| 2346 | for (istack = 0; istack < kNstack; istack++) { |
| 2347 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2348 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2349 | Int_t iCopy = iDet + 1; |
| 225096c8 |
2350 | xpos = fgkCwidth[ilayer]/2.0 - 1.9 * (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| 053a5ea0 |
2351 | / ((Float_t) GetRowMax(ilayer,istack,0)); |
| 225096c8 |
2352 | ypos = 0.05 * fgkClength[ilayer][istack]; |
| 053a5ea0 |
2353 | zpos = kDCSz/2.0 - fgkCsvH/2.0; |
| 2354 | sprintf(cTagV,"UU%02d",iDet); |
| 2355 | gMC->Gspos("UDCS",iCopy,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 2356 | } |
| 2357 | } |
| 2358 | |
| 2359 | // |
| 2360 | // The ORI boards |
| 2361 | // |
| 2362 | |
| 2363 | const Float_t kORIx = 4.2; |
| 2364 | const Float_t kORIy = 13.5; |
| 2365 | const Float_t kORIz = 0.3; |
| 2366 | |
| 2367 | const Float_t kORIpcTh = 0.15; |
| 2368 | const Float_t kORIcuTh = 0.01; |
| 2369 | const Float_t kORIcoTh = 0.04; |
| 2370 | |
| 2371 | // The mother volume for the ORIs (air) |
| 2372 | const Int_t kNparORI = 3; |
| 2373 | Float_t parORI[kNparORI]; |
| 2374 | parORI[0] = kORIx /2.0; |
| 2375 | parORI[1] = kORIy /2.0; |
| 2376 | parORI[2] = kORIz /2.0; |
| 2377 | gMC->Gsvolu("UORI","BOX",idtmed[1302-1],parORI,kNparORI); |
| 2378 | |
| 2379 | // The ORI carrier G10 layer |
| 2380 | parORI[0] = kORIx /2.0; |
| 2381 | parORI[1] = kORIy /2.0; |
| 2382 | parORI[2] = kORIpcTh/2.0; |
| 2383 | gMC->Gsvolu("UOR1","BOX",idtmed[1319-1],parORI,kNparORI); |
| 2384 | // The ORI carrier Cu layer |
| 2385 | parORI[0] = kORIx /2.0; |
| 2386 | parORI[1] = kORIy /2.0; |
| 2387 | parORI[2] = kORIcuTh/2.0; |
| 2388 | gMC->Gsvolu("UOR2","BOX",idtmed[1318-1],parORI,kNparORI); |
| 2389 | // The aluminum of the cooling plates |
| 2390 | parORI[0] = kORIx /2.0; |
| 2391 | parORI[1] = kORIy /2.0; |
| 2392 | parORI[2] = kORIcoTh/2.0; |
| 2393 | gMC->Gsvolu("UOR3","BOX",idtmed[1324-1],parORI,kNparORI); |
| 2394 | |
| 2395 | // Put the ORI material inside the ORI mother volume |
| 2396 | xpos = 0.0; |
| 2397 | ypos = 0.0; |
| 2398 | zpos = -kORIz /2.0 + kORIpcTh/2.0; |
| 2399 | gMC->Gspos("UOR1",1,"UORI",xpos,ypos,zpos,0,"ONLY"); |
| 2400 | zpos += kORIpcTh/2.0 + kORIcuTh/2.0; |
| 2401 | gMC->Gspos("UOR2",1,"UORI",xpos,ypos,zpos,0,"ONLY"); |
| 2402 | zpos += kORIcuTh/2.0 + kORIcoTh/2.0; |
| 2403 | gMC->Gspos("UOR3",1,"UORI",xpos,ypos,zpos,0,"ONLY"); |
| 2404 | |
| 2405 | // Put the ORI board in the chamber services mother volume |
| 2406 | for (istack = 0; istack < kNstack; istack++) { |
| 2407 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2408 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2409 | Int_t iCopy = iDet + 1; |
| 225096c8 |
2410 | xpos = fgkCwidth[ilayer]/2.0 - 1.92 * (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| 053a5ea0 |
2411 | / ((Float_t) GetRowMax(ilayer,istack,0)); |
| 2412 | ypos = -16.0; |
| 2413 | zpos = kORIz/2.0 - fgkCsvH/2.0; |
| 2414 | sprintf(cTagV,"UU%02d",iDet); |
| 2415 | gMC->Gspos("UORI",iCopy ,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 225096c8 |
2416 | xpos = -fgkCwidth[ilayer]/2.0 + 3.8 * (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| 053a5ea0 |
2417 | / ((Float_t) GetRowMax(ilayer,istack,0)); |
| 2418 | ypos = -16.0; |
| 2419 | zpos = kORIz/2.0 - fgkCsvH/2.0; |
| 2420 | sprintf(cTagV,"UU%02d",iDet); |
| 2421 | gMC->Gspos("UORI",iCopy+kNdet,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 2422 | } |
| 2423 | } |
| 2424 | |
| b640260a |
2425 | // |
| 2426 | // Services in front of the super module |
| 2427 | // |
| 2428 | |
| 9bf8c575 |
2429 | // Gas in-/outlet pipes (INOX) |
| 2430 | parTube[0] = 0.0; |
| 2431 | parTube[1] = 0.0; |
| 2432 | parTube[2] = 0.0; |
| 2433 | gMC->Gsvolu("UTG3","TUBE",idtmed[1308-1],parTube,0); |
| 2434 | // The gas inside the in-/outlet pipes (Xe) |
| 2435 | parTube[0] = 0.0; |
| 2436 | parTube[1] = 1.2/2.0; |
| 2437 | parTube[2] = -1.0; |
| 2438 | gMC->Gsvolu("UTG4","TUBE",idtmed[1309-1],parTube,kNparTube); |
| 2439 | xpos = 0.0; |
| 2440 | ypos = 0.0; |
| 2441 | zpos = 0.0; |
| 2442 | gMC->Gspos("UTG4",1,"UTG3",xpos,ypos,zpos,0,"ONLY"); |
| 053767a4 |
2443 | for (ilayer = 0; ilayer < kNlayer-1; ilayer++) { |
| 9bf8c575 |
2444 | xpos = 0.0; |
| 225096c8 |
2445 | ypos = fgkClength[ilayer][2]/2.0 |
| 2446 | + fgkClength[ilayer][1] |
| 2447 | + fgkClength[ilayer][0]; |
| 9bf8c575 |
2448 | zpos = 9.0 - fgkSheight/2.0 |
| 053767a4 |
2449 | + ilayer * (fgkCH + fgkVspace); |
| 9bf8c575 |
2450 | parTube[0] = 0.0; |
| 2451 | parTube[1] = 1.5/2.0; |
| 225096c8 |
2452 | parTube[2] = fgkCwidth[ilayer]/2.0 - 2.5; |
| 053767a4 |
2453 | gMC->Gsposp("UTG3",ilayer+1 ,"UTI1", xpos, ypos, zpos |
| 9bf8c575 |
2454 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2455 | gMC->Gsposp("UTG3",ilayer+1+1*kNlayer,"UTI1", xpos,-ypos, zpos |
| 9bf8c575 |
2456 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2457 | gMC->Gsposp("UTG3",ilayer+1+2*kNlayer,"UTI2", xpos, ypos, zpos |
| 9bf8c575 |
2458 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2459 | gMC->Gsposp("UTG3",ilayer+1+3*kNlayer,"UTI2", xpos,-ypos, zpos |
| 9bf8c575 |
2460 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2461 | gMC->Gsposp("UTG3",ilayer+1+4*kNlayer,"UTI3", xpos, ypos, zpos |
| 9bf8c575 |
2462 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2463 | gMC->Gsposp("UTG3",ilayer+1+5*kNlayer,"UTI3", xpos,-ypos, zpos |
| 9bf8c575 |
2464 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 2465 | } |
| 2466 | |
| b640260a |
2467 | // Gas distribution box |
| 2468 | parBox[0] = 14.50/2.0; |
| 2469 | parBox[1] = 4.52/2.0; |
| 2470 | parBox[2] = 5.00/2.0; |
| 2471 | gMC->Gsvolu("UTGD","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2472 | parBox[0] = 14.50/2.0; |
| 2473 | parBox[1] = 4.00/2.0; |
| 2474 | parBox[2] = 4.40/2.0; |
| 2475 | gMC->Gsvolu("UTGI","BOX ",idtmed[1309-1],parBox,kNparBox); |
| 2476 | parTube[0] = 0.0; |
| 2477 | parTube[1] = 4.0/2.0; |
| 2478 | parTube[2] = 8.0/2.0; |
| 2479 | gMC->Gsvolu("UTGT","TUBE",idtmed[1308-1],parTube,kNparTube); |
| 2480 | parTube[0] = 0.0; |
| 2481 | parTube[1] = 3.4/2.0; |
| 2482 | parTube[2] = 8.0/2.0; |
| 2483 | gMC->Gsvolu("UTGG","TUBE",idtmed[1309-1],parTube,kNparTube); |
| 2484 | xpos = 0.0; |
| 2485 | ypos = 0.0; |
| 2486 | zpos = 0.0; |
| 2487 | gMC->Gspos("UTGI",1,"UTGD",xpos,ypos,zpos, 0,"ONLY"); |
| 2488 | gMC->Gspos("UTGG",1,"UTGT",xpos,ypos,zpos, 0,"ONLY"); |
| 2489 | xpos = 0.0; |
| 2490 | ypos = 0.0; |
| 2491 | zpos = 0.0; |
| 2492 | gMC->Gspos("UTGD",1,"UTF1",xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
2493 | xpos = -3.0; |
| 2494 | ypos = 0.0; |
| 2495 | zpos = 6.5; |
| 2496 | gMC->Gspos("UTGT",1,"UTF1",xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
2497 | xpos = -11.25; |
| 2498 | ypos = 0.0; |
| 2499 | zpos = 0.5; |
| 2500 | gMC->Gspos("UTGT",3,"UTF1",xpos,ypos,zpos,matrix[2],"ONLY"); |
| b640260a |
2501 | xpos = 11.25; |
| 2502 | ypos = 0.0; |
| 2503 | zpos = 0.5; |
| 2504 | gMC->Gspos("UTGT",5,"UTF1",xpos,ypos,zpos,matrix[2],"ONLY"); |
| b640260a |
2505 | |
| 2506 | // Cooling manifolds |
| 2507 | parBox[0] = 5.0/2.0; |
| 2508 | parBox[1] = 23.0/2.0; |
| 2509 | parBox[2] = 70.0/2.0; |
| 2510 | gMC->Gsvolu("UTCM","BOX ",idtmed[1302-1],parBox,kNparBox); |
| 2511 | parBox[0] = 5.0/2.0; |
| 2512 | parBox[1] = 5.0/2.0; |
| 2513 | parBox[2] = 70.0/2.0; |
| 2514 | gMC->Gsvolu("UTCA","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2515 | parBox[0] = 5.0/2.0 - 0.3; |
| 2516 | parBox[1] = 5.0/2.0 - 0.3; |
| 2517 | parBox[2] = 70.0/2.0 - 0.3; |
| 2518 | gMC->Gsvolu("UTCW","BOX ",idtmed[1314-1],parBox,kNparBox); |
| 2519 | xpos = 0.0; |
| 2520 | ypos = 0.0; |
| 2521 | zpos = 0.0; |
| 2522 | gMC->Gspos("UTCW",1,"UTCA", xpos, ypos, zpos, 0,"ONLY"); |
| 2523 | xpos = 0.0; |
| 2524 | ypos = 5.0/2.0 - 23.0/2.0; |
| 2525 | zpos = 0.0; |
| 2526 | gMC->Gspos("UTCA",1,"UTCM", xpos, ypos, zpos, 0,"ONLY"); |
| 2527 | parTube[0] = 0.0; |
| 2528 | parTube[1] = 3.0/2.0; |
| 2529 | parTube[2] = 18.0/2.0; |
| 9bf8c575 |
2530 | gMC->Gsvolu("UTCO","TUBE",idtmed[1308-1],parTube,kNparTube); |
| b640260a |
2531 | parTube[0] = 0.0; |
| 2532 | parTube[1] = 3.0/2.0 - 0.3; |
| 2533 | parTube[2] = 18.0/2.0; |
| 2534 | gMC->Gsvolu("UTCL","TUBE",idtmed[1314-1],parTube,kNparTube); |
| 2535 | xpos = 0.0; |
| 2536 | ypos = 0.0; |
| 2537 | zpos = 0.0; |
| 9bf8c575 |
2538 | gMC->Gspos("UTCL",1,"UTCO", xpos, ypos, zpos, 0,"ONLY"); |
| b640260a |
2539 | xpos = 0.0; |
| 2540 | ypos = 2.5; |
| 2541 | zpos = -70.0/2.0 + 7.0; |
| 9bf8c575 |
2542 | gMC->Gspos("UTCO",1,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2543 | zpos += 7.0; |
| 9bf8c575 |
2544 | gMC->Gspos("UTCO",2,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2545 | zpos += 7.0; |
| 9bf8c575 |
2546 | gMC->Gspos("UTCO",3,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2547 | zpos += 7.0; |
| 9bf8c575 |
2548 | gMC->Gspos("UTCO",4,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2549 | zpos += 7.0; |
| 9bf8c575 |
2550 | gMC->Gspos("UTCO",5,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2551 | zpos += 7.0; |
| 9bf8c575 |
2552 | gMC->Gspos("UTCO",6,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2553 | zpos += 7.0; |
| 9bf8c575 |
2554 | gMC->Gspos("UTCO",7,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2555 | zpos += 7.0; |
| 9bf8c575 |
2556 | gMC->Gspos("UTCO",8,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2557 | |
| 2558 | xpos = 40.0; |
| 2559 | ypos = fgkFlength/2.0 - 23.0/2.0; |
| 2560 | zpos = 0.0; |
| 2561 | gMC->Gspos("UTCM",1,"UTF1", xpos, ypos, zpos,matrix[0],"ONLY"); |
| 2562 | gMC->Gspos("UTCM",2,"UTF1",-xpos, ypos, zpos,matrix[1],"ONLY"); |
| 2563 | gMC->Gspos("UTCM",3,"UTF2", xpos,-ypos, zpos,matrix[5],"ONLY"); |
| 2564 | gMC->Gspos("UTCM",4,"UTF2",-xpos,-ypos, zpos,matrix[6],"ONLY"); |
| 2565 | |
| f73d8692 |
2566 | // Power connection boards (Cu) |
| 2567 | parBox[0] = 0.5/2.0; |
| 2568 | parBox[1] = 15.0/2.0; |
| 2569 | parBox[2] = 7.0/2.0; |
| 2570 | gMC->Gsvolu("UTPC","BOX ",idtmed[1325-1],parBox,kNparBox); |
| 053767a4 |
2571 | for (ilayer = 0; ilayer < kNlayer-1; ilayer++) { |
| 225096c8 |
2572 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0; |
| f73d8692 |
2573 | ypos = 0.0; |
| 053a5ea0 |
2574 | zpos = fgkVrocsm + fgkSMpltT + kPWRhgtA/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
2575 | + (ilayer+1) * (fgkCH + fgkVspace); |
| 2576 | gMC->Gspos("UTPC",ilayer ,"UTF1", xpos,ypos,zpos,matrix[0],"ONLY"); |
| 2577 | gMC->Gspos("UTPC",ilayer+kNlayer,"UTF1",-xpos,ypos,zpos,matrix[1],"ONLY"); |
| f73d8692 |
2578 | } |
| 225096c8 |
2579 | xpos = fgkCwidth[5]/2.0 + kPWRhgtA/2.0 - 2.0; |
| f73d8692 |
2580 | ypos = 0.0; |
| 2581 | zpos = fgkSheight/2.0 - fgkSMpltT - 2.0; |
| 053767a4 |
2582 | gMC->Gspos("UTPC",5 ,"UTF1", xpos,ypos,zpos,matrix[3],"ONLY"); |
| 2583 | gMC->Gspos("UTPC",5+kNlayer,"UTF1",-xpos,ypos,zpos,matrix[3],"ONLY"); |
| f73d8692 |
2584 | |
| 2585 | // Power connection panel (Al) |
| 2586 | parBox[0] = 60.0/2.0; |
| 2587 | parBox[1] = 10.0/2.0; |
| 2588 | parBox[2] = 3.0/2.0; |
| 2589 | gMC->Gsvolu("UTPP","BOX ",idtmed[1301-1],parBox,kNparBox); |
| 2590 | xpos = 0.0; |
| 2591 | ypos = 0.0; |
| 2592 | zpos = 18.0; |
| 2593 | gMC->Gspos("UTPP",1,"UTF1", xpos,ypos,zpos,0,"ONLY"); |
| 2594 | |
| 2595 | // |
| 2596 | // Electronics boxes |
| 2597 | // |
| 2598 | |
| 2599 | // Casing (INOX) |
| 2600 | parBox[0] = 60.0/2.0; |
| 2601 | parBox[1] = 10.0/2.0; |
| 2602 | parBox[2] = 6.0/2.0; |
| 2603 | gMC->Gsvolu("UTE1","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2604 | // Interior (air) |
| 2605 | parBox[0] = parBox[0] - 0.5; |
| 2606 | parBox[1] = parBox[1] - 0.5; |
| 2607 | parBox[2] = parBox[2] - 0.5; |
| 2608 | gMC->Gsvolu("UTE2","BOX ",idtmed[1302-1],parBox,kNparBox); |
| 2609 | xpos = 0.0; |
| 2610 | ypos = 0.0; |
| 2611 | zpos = 0.0; |
| 2612 | gMC->Gspos("UTE2",1,"UTE1",xpos,ypos,zpos,0,"ONLY"); |
| 2613 | xpos = 0.0; |
| 2614 | ypos = fgkSlength/2.0 - 10.0/2.0 - 3.0; |
| 2615 | zpos = -fgkSheight/2.0 + 6.0/2.0 + 1.0; |
| 2616 | gMC->Gspos("UTE1",1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 2617 | gMC->Gspos("UTE1",2,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 2618 | gMC->Gspos("UTE1",3,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 2619 | |
| 2620 | // Casing (INOX) |
| 2621 | parBox[0] = 50.0/2.0; |
| 2622 | parBox[1] = 15.0/2.0; |
| 2623 | parBox[2] = 20.0/2.0; |
| 2624 | gMC->Gsvolu("UTE3","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2625 | // Interior (air) |
| 2626 | parBox[0] = parBox[0] - 0.5; |
| 2627 | parBox[1] = parBox[1] - 0.5; |
| 2628 | parBox[2] = parBox[2] - 0.5; |
| 2629 | gMC->Gsvolu("UTE4","BOX ",idtmed[1302-1],parBox,kNparBox); |
| 2630 | xpos = 0.0; |
| 2631 | ypos = 0.0; |
| 2632 | zpos = 0.0; |
| 2633 | gMC->Gspos("UTE4",1,"UTE3",xpos,ypos,zpos,0,"ONLY"); |
| 2634 | xpos = 0.0; |
| 2635 | ypos = -fgkSlength/2.0 + 15.0/2.0 + 3.0; |
| 2636 | zpos = -fgkSheight/2.0 + 20.0/2.0 + 1.0; |
| 2637 | gMC->Gspos("UTE3",1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 2638 | gMC->Gspos("UTE3",2,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 2639 | gMC->Gspos("UTE3",3,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 2640 | |
| 2641 | // Casing (INOX) |
| 2642 | parBox[0] = 20.0/2.0; |
| 2643 | parBox[1] = 7.0/2.0; |
| 2644 | parBox[2] = 20.0/2.0; |
| 2645 | gMC->Gsvolu("UTE5","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2646 | // Interior (air) |
| 2647 | parBox[0] = parBox[0] - 0.5; |
| 2648 | parBox[1] = parBox[1] - 0.5; |
| 2649 | parBox[2] = parBox[2] - 0.5; |
| 2650 | gMC->Gsvolu("UTE6","BOX ",idtmed[1302-1],parBox,kNparBox); |
| 2651 | xpos = 0.0; |
| 2652 | ypos = 0.0; |
| 2653 | zpos = 0.0; |
| 2654 | gMC->Gspos("UTE6",1,"UTE5",xpos,ypos,zpos,0,"ONLY"); |
| 2655 | xpos = 20.0; |
| 2656 | ypos = -fgkSlength/2.0 + 7.0/2.0 + 3.0; |
| 2657 | zpos = 0.0; |
| 2658 | gMC->Gspos("UTE5",1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 2659 | gMC->Gspos("UTE5",2,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 2660 | gMC->Gspos("UTE5",3,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 2661 | xpos = -xpos; |
| 2662 | gMC->Gspos("UTE5",4,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 2663 | gMC->Gspos("UTE5",5,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 2664 | gMC->Gspos("UTE5",6,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 2665 | |
| bd0f8685 |
2666 | } |
| 2667 | |
| 2668 | //_____________________________________________________________________________ |
| 053a5ea0 |
2669 | void AliTRDgeometry::AssembleChamber(Int_t ilayer, Int_t istack) |
| f7336fa3 |
2670 | { |
| 2671 | // |
| 053a5ea0 |
2672 | // Group volumes UA, UD, UF, UU into an assembly that defines the |
| 2673 | // alignable volume of a single readout chamber |
| 0a770ac9 |
2674 | // |
| bd0f8685 |
2675 | |
| a3f8715e |
2676 | Char_t cTagM[100]; |
| 053a5ea0 |
2677 | Char_t cTagV[100]; |
| bd0f8685 |
2678 | |
| 053a5ea0 |
2679 | Double_t xpos = 0.0; |
| 2680 | Double_t ypos = 0.0; |
| 2681 | Double_t zpos = 0.0; |
| bd0f8685 |
2682 | |
| 053a5ea0 |
2683 | Int_t idet = GetDetectorSec(ilayer,istack); |
| bd0f8685 |
2684 | |
| 053a5ea0 |
2685 | // Create the assembly for a given ROC |
| 2686 | sprintf(cTagM,"UT%02d",idet); |
| 2687 | TGeoVolume *roc = new TGeoVolumeAssembly(cTagM); |
| bd0f8685 |
2688 | |
| 053a5ea0 |
2689 | // Add the lower part of the chamber (aluminum frame), |
| 2690 | // including radiator and drift region |
| 2691 | xpos = 0.0; |
| 2692 | ypos = 0.0; |
| 2693 | zpos = fgkCraH/2.0 + fgkCdrH/2.0 - fgkCHsv/2.0; |
| 2694 | sprintf(cTagV,"UA%02d",idet); |
| 2695 | TGeoVolume *rocA = gGeoManager->GetVolume(cTagV); |
| 2696 | roc->AddNode(rocA,1,new TGeoTranslation(xpos,ypos,zpos)); |
| bd0f8685 |
2697 | |
| 053a5ea0 |
2698 | // Add the additional aluminum ledges |
| 225096c8 |
2699 | xpos = fgkCwidth[ilayer]/2.0 + fgkCalWmod/2.0; |
| 053a5ea0 |
2700 | ypos = 0.0; |
| 2701 | zpos = fgkCraH + fgkCdrH - fgkCalZpos - fgkCalHmod/2.0 - fgkCHsv/2.0; |
| 2702 | sprintf(cTagV,"UZ%02d",idet); |
| 2703 | TGeoVolume *rocZ = gGeoManager->GetVolume(cTagV); |
| 2704 | roc->AddNode(rocZ,1,new TGeoTranslation( xpos,ypos,zpos)); |
| 2705 | roc->AddNode(rocZ,2,new TGeoTranslation(-xpos,ypos,zpos)); |
| 2706 | |
| 2707 | // Add the additional wacosit ledges |
| 225096c8 |
2708 | xpos = fgkCwidth[ilayer]/2.0 + fgkCwsW/2.0; |
| 053a5ea0 |
2709 | ypos = 0.0; |
| 2710 | zpos = fgkCraH + fgkCdrH - fgkCwsH/2.0 - fgkCHsv/2.0; |
| 2711 | sprintf(cTagV,"UP%02d",idet); |
| 2712 | TGeoVolume *rocP = gGeoManager->GetVolume(cTagV); |
| 2713 | roc->AddNode(rocP,1,new TGeoTranslation( xpos,ypos,zpos)); |
| 2714 | roc->AddNode(rocP,2,new TGeoTranslation(-xpos,ypos,zpos)); |
| 2715 | |
| 2716 | // Add the middle part of the chamber (G10 frame), |
| 2717 | // including amplification region |
| 2718 | xpos = 0.0; |
| 2719 | ypos = 0.0; |
| 2720 | zpos = fgkCamH/2.0 + fgkCraH + fgkCdrH - fgkCHsv/2.0; |
| 2721 | sprintf(cTagV,"UD%02d",idet); |
| 2722 | TGeoVolume *rocD = gGeoManager->GetVolume(cTagV); |
| 2723 | roc->AddNode(rocD,1,new TGeoTranslation(xpos,ypos,zpos)); |
| bd0f8685 |
2724 | |
| 053a5ea0 |
2725 | // Add the upper part of the chamber (aluminum frame), |
| 2726 | // including back panel and FEE |
| 2727 | xpos = 0.0; |
| 2728 | ypos = 0.0; |
| 2729 | zpos = fgkCroH/2.0 + fgkCamH + fgkCraH + fgkCdrH - fgkCHsv/2.0; |
| 2730 | sprintf(cTagV,"UF%02d",idet); |
| 2731 | TGeoVolume *rocF = gGeoManager->GetVolume(cTagV); |
| 2732 | roc->AddNode(rocF,1,new TGeoTranslation(xpos,ypos,zpos)); |
| bd0f8685 |
2733 | |
| 053a5ea0 |
2734 | // Add the volume with services on top of the back panel |
| 2735 | xpos = 0.0; |
| 2736 | ypos = 0.0; |
| 2737 | zpos = fgkCsvH/2.0 + fgkCroH + fgkCamH + fgkCraH + fgkCdrH - fgkCHsv/2.0; |
| 2738 | sprintf(cTagV,"UU%02d",idet); |
| 2739 | TGeoVolume *rocU = gGeoManager->GetVolume(cTagV); |
| 2740 | roc->AddNode(rocU,1,new TGeoTranslation(xpos,ypos,zpos)); |
| bd0f8685 |
2741 | |
| 053a5ea0 |
2742 | // Place the ROC assembly into the super modules |
| 2743 | xpos = 0.0; |
| 2744 | ypos = 0.0; |
| 225096c8 |
2745 | ypos = fgkClength[ilayer][0] + fgkClength[ilayer][1] + fgkClength[ilayer][2]/2.0; |
| 053a5ea0 |
2746 | for (Int_t ic = 0; ic < istack; ic++) { |
| 225096c8 |
2747 | ypos -= fgkClength[ilayer][ic]; |
| bd0f8685 |
2748 | } |
| 225096c8 |
2749 | ypos -= fgkClength[ilayer][istack]/2.0; |
| 053a5ea0 |
2750 | zpos = fgkVrocsm + fgkSMpltT + fgkCHsv/2.0 - fgkSheight/2.0 |
| 2751 | + ilayer * (fgkCH + fgkVspace); |
| 2752 | TGeoVolume *sm1 = gGeoManager->GetVolume("UTI1"); |
| 2753 | TGeoVolume *sm2 = gGeoManager->GetVolume("UTI2"); |
| 2754 | TGeoVolume *sm3 = gGeoManager->GetVolume("UTI3"); |
| 2755 | sm1->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos)); |
| 2756 | sm2->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos)); |
| 053767a4 |
2757 | if (istack != 2) { |
| 053a5ea0 |
2758 | // w/o middle stack |
| 2759 | sm3->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos)); |
| e7014565 |
2760 | } |
| f7336fa3 |
2761 | |
| 2762 | } |
| 2763 | |
| 25ca55ce |
2764 | //_____________________________________________________________________________ |
| e74d6d1b |
2765 | Bool_t AliTRDgeometry::RotateBack(Int_t det |
| 2766 | , const Double_t * const loc |
| 2767 | , Double_t *glb) const |
| 25ca55ce |
2768 | { |
| 2769 | // |
| 2669905c |
2770 | // Rotates a chambers to transform the corresponding local frame |
| 2771 | // coordinates <loc> into the coordinates of the ALICE restframe <glb>. |
| 25ca55ce |
2772 | // |
| 2773 | |
| 2669905c |
2774 | Int_t sector = GetSector(det); |
| 25ca55ce |
2775 | |
| 2669905c |
2776 | glb[0] = loc[0] * fRotB11[sector] - loc[1] * fRotB12[sector]; |
| 2777 | glb[1] = loc[0] * fRotB21[sector] + loc[1] * fRotB22[sector]; |
| 2778 | glb[2] = loc[2]; |
| f7336fa3 |
2779 | |
| 2780 | return kTRUE; |
| 2781 | |
| 2782 | } |
| 2783 | |
| 2784 | //_____________________________________________________________________________ |
| 053767a4 |
2785 | Int_t AliTRDgeometry::GetDetectorSec(Int_t layer, Int_t stack) |
| 0a770ac9 |
2786 | { |
| 2787 | // |
| 053767a4 |
2788 | // Convert plane / stack into detector number for one single sector |
| 0a770ac9 |
2789 | // |
| 2790 | |
| 053767a4 |
2791 | return (layer + stack * fgkNlayer); |
| 0a770ac9 |
2792 | |
| 2793 | } |
| 2794 | |
| 2795 | //_____________________________________________________________________________ |
| 053767a4 |
2796 | Int_t AliTRDgeometry::GetDetector(Int_t layer, Int_t stack, Int_t sector) |
| f7336fa3 |
2797 | { |
| 2798 | // |
| 053767a4 |
2799 | // Convert layer / stack / sector into detector number |
| f7336fa3 |
2800 | // |
| 2801 | |
| 053767a4 |
2802 | return (layer + stack * fgkNlayer + sector * fgkNlayer * fgkNstack); |
| f7336fa3 |
2803 | |
| 2804 | } |
| 2805 | |
| 2806 | //_____________________________________________________________________________ |
| 053767a4 |
2807 | Int_t AliTRDgeometry::GetLayer(Int_t det) |
| f7336fa3 |
2808 | { |
| 2809 | // |
| 053767a4 |
2810 | // Reconstruct the layer number from the detector number |
| f7336fa3 |
2811 | // |
| 2812 | |
| 053767a4 |
2813 | return ((Int_t) (det % fgkNlayer)); |
| f7336fa3 |
2814 | |
| 2815 | } |
| 2816 | |
| 2817 | //_____________________________________________________________________________ |
| 44024ed3 |
2818 | Int_t AliTRDgeometry::GetStack(Int_t det) |
| f7336fa3 |
2819 | { |
| 2820 | // |
| 053767a4 |
2821 | // Reconstruct the stack number from the detector number |
| f7336fa3 |
2822 | // |
| 2823 | |
| 053767a4 |
2824 | return ((Int_t) (det % (fgkNlayer * fgkNstack)) / fgkNlayer); |
| f7336fa3 |
2825 | |
| 2826 | } |
| 2827 | |
| d9950a5a |
2828 | //_____________________________________________________________________________ |
| 053767a4 |
2829 | Int_t AliTRDgeometry::GetStack(Double_t z, Int_t layer) |
| d9950a5a |
2830 | { |
| 2831 | // |
| 053767a4 |
2832 | // Reconstruct the chamber number from the z position and layer number |
| d9950a5a |
2833 | // |
| f73d8692 |
2834 | // The return function has to be protected for positiveness !! |
| 2835 | // |
| d9950a5a |
2836 | |
| 053767a4 |
2837 | if ((layer < 0) || |
| 2838 | (layer >= fgkNlayer)) return -1; |
| d9950a5a |
2839 | |
| 053767a4 |
2840 | Int_t istck = fgkNstack; |
| f73d8692 |
2841 | Double_t zmin; |
| 2842 | Double_t zmax; |
| 2843 | |
| 2844 | do { |
| 053767a4 |
2845 | istck--; |
| 2846 | if (istck < 0) break; |
| 2847 | AliTRDpadPlane *pp = GetPadPlane(layer,istck); |
| 0906e73e |
2848 | zmax = pp->GetRow0(); |
| f73d8692 |
2849 | Int_t nrows = pp->GetNrows(); |
| 2850 | zmin = zmax - 2 * pp->GetLengthOPad() |
| 2851 | - (nrows-2) * pp->GetLengthIPad() |
| 2852 | - (nrows-1) * pp->GetRowSpacing(); |
| 2853 | } while((z < zmin) || (z > zmax)); |
| d9950a5a |
2854 | |
| 053767a4 |
2855 | return istck; |
| d9950a5a |
2856 | |
| f73d8692 |
2857 | } |
| 0906e73e |
2858 | |
| f7336fa3 |
2859 | //_____________________________________________________________________________ |
| 44024ed3 |
2860 | Int_t AliTRDgeometry::GetSector(Int_t det) |
| f7336fa3 |
2861 | { |
| 2862 | // |
| 2863 | // Reconstruct the sector number from the detector number |
| 2864 | // |
| 2865 | |
| 053767a4 |
2866 | return ((Int_t) (det / (fgkNlayer * fgkNstack))); |
| f7336fa3 |
2867 | |
| 2868 | } |
| 2869 | |
| 7925de54 |
2870 | //_____________________________________________________________________________ |
| 053767a4 |
2871 | AliTRDpadPlane *AliTRDgeometry::GetPadPlane(Int_t layer, Int_t stack) |
| 7925de54 |
2872 | { |
| f162af62 |
2873 | // |
| 053767a4 |
2874 | // Returns the pad plane for a given plane <pl> and stack <st> number |
| f162af62 |
2875 | // |
| 7925de54 |
2876 | |
| 225096c8 |
2877 | if (!fgPadPlaneArray) { |
| f162af62 |
2878 | CreatePadPlaneArray(); |
| 2879 | } |
| 2880 | |
| 053767a4 |
2881 | Int_t ipp = GetDetectorSec(layer,stack); |
| 225096c8 |
2882 | return ((AliTRDpadPlane *) fgPadPlaneArray->At(ipp)); |
| f162af62 |
2883 | |
| 2884 | } |
| 2885 | |
| 2886 | //_____________________________________________________________________________ |
| 053767a4 |
2887 | Int_t AliTRDgeometry::GetRowMax(Int_t layer, Int_t stack, Int_t /*sector*/) |
| f162af62 |
2888 | { |
| 2889 | // |
| 2890 | // Returns the number of rows on the pad plane |
| 2891 | // |
| 2892 | |
| 053767a4 |
2893 | return GetPadPlane(layer,stack)->GetNrows(); |
| f162af62 |
2894 | |
| 2895 | } |
| 2896 | |
| 2897 | //_____________________________________________________________________________ |
| 053767a4 |
2898 | Int_t AliTRDgeometry::GetColMax(Int_t layer) |
| f162af62 |
2899 | { |
| 2900 | // |
| 2901 | // Returns the number of rows on the pad plane |
| 2902 | // |
| 2903 | |
| 053767a4 |
2904 | return GetPadPlane(layer,0)->GetNcols(); |
| f162af62 |
2905 | |
| 2906 | } |
| 2907 | |
| 2908 | //_____________________________________________________________________________ |
| 053767a4 |
2909 | Double_t AliTRDgeometry::GetRow0(Int_t layer, Int_t stack, Int_t /*sector*/) |
| f162af62 |
2910 | { |
| 2911 | // |
| 2912 | // Returns the position of the border of the first pad in a row |
| 2913 | // |
| 2914 | |
| 053767a4 |
2915 | return GetPadPlane(layer,stack)->GetRow0(); |
| f162af62 |
2916 | |
| 2917 | } |
| 2918 | |
| 2919 | //_____________________________________________________________________________ |
| 053767a4 |
2920 | Double_t AliTRDgeometry::GetCol0(Int_t layer) |
| f162af62 |
2921 | { |
| 2922 | // |
| 2923 | // Returns the position of the border of the first pad in a column |
| 2924 | // |
| 2925 | |
| 053767a4 |
2926 | return GetPadPlane(layer,0)->GetCol0(); |
| f162af62 |
2927 | |
| 2928 | } |
| 2929 | |
| b4a9cd27 |
2930 | //_____________________________________________________________________________ |
| 9a96f175 |
2931 | Bool_t AliTRDgeometry::CreateClusterMatrixArray() |
| bd0f8685 |
2932 | { |
| b4a9cd27 |
2933 | // |
| 9a96f175 |
2934 | // Create the matrices to transform cluster coordinates from the |
| 2935 | // local chamber system to the tracking coordinate system |
| b4a9cd27 |
2936 | // |
| 2937 | |
| 030b4415 |
2938 | if (!gGeoManager) { |
| 2939 | return kFALSE; |
| 2940 | } |
| 0a5f3331 |
2941 | |
| 225096c8 |
2942 | if(fgClusterMatrixArray) |
| 2943 | return kTRUE; |
| 2944 | |
| 18c05eb3 |
2945 | TString volPath; |
| 2946 | TString vpStr = "ALIC_1/B077_1/BSEGMO"; |
| 2947 | TString vpApp1 = "_1/BTRD"; |
| 2948 | TString vpApp2 = "_1"; |
| 2949 | TString vpApp3a = "/UTR1_1/UTS1_1/UTI1_1"; |
| 2950 | TString vpApp3b = "/UTR2_1/UTS2_1/UTI2_1"; |
| 2951 | TString vpApp3c = "/UTR3_1/UTS3_1/UTI3_1"; |
| 2952 | |
| 225096c8 |
2953 | fgClusterMatrixArray = new TObjArray(kNdet); |
| 90dbf5fb |
2954 | AliAlignObjParams o; |
| bd0f8685 |
2955 | |
| ae079791 |
2956 | for (Int_t iLayer = AliGeomManager::kTRD1; iLayer <= AliGeomManager::kTRD6; iLayer++) { |
| 2957 | for (Int_t iModule = 0; iModule < AliGeomManager::LayerSize(iLayer); iModule++) { |
| 02cb65d6 |
2958 | |
| 053767a4 |
2959 | Int_t isector = iModule/Nstack(); |
| 2960 | Int_t istack = iModule%Nstack(); |
| 02cb65d6 |
2961 | Int_t iLayerTRD = iLayer - AliGeomManager::kTRD1; |
| 053767a4 |
2962 | Int_t lid = GetDetector(iLayerTRD,istack,isector); |
| 02cb65d6 |
2963 | |
| 18c05eb3 |
2964 | // Check for disabled supermodules |
| 2965 | volPath = vpStr; |
| 2966 | volPath += isector; |
| 2967 | volPath += vpApp1; |
| 2968 | volPath += isector; |
| 2969 | volPath += vpApp2; |
| 2970 | switch (isector) { |
| 2971 | case 13: |
| 2972 | case 14: |
| 2973 | case 15: |
| 2974 | if (istack == 2) { |
| 2975 | continue; |
| 2976 | } |
| 2977 | volPath += vpApp3c; |
| 2978 | break; |
| 2979 | case 11: |
| 2980 | case 12: |
| 2981 | volPath += vpApp3b; |
| 2982 | break; |
| 2983 | default: |
| 2984 | volPath += vpApp3a; |
| 2985 | }; |
| 2986 | if (!gGeoManager->CheckPath(volPath)) { |
| 2987 | continue; |
| 2988 | } |
| 030b4415 |
2989 | |
| 18c05eb3 |
2990 | // Check for holes in from of PHOS |
| 2991 | if (((isector == 13) || (isector == 14) || (isector == 15)) && |
| 2992 | (istack == 2)) { |
| 2993 | continue; |
| 2994 | } |
| 5f6f5c22 |
2995 | |
| ae079791 |
2996 | UShort_t volid = AliGeomManager::LayerToVolUID(iLayer,iModule); |
| 2997 | const char *symname = AliGeomManager::SymName(volid); |
| 0a5f3331 |
2998 | TGeoPNEntry *pne = gGeoManager->GetAlignableEntry(symname); |
| 2999 | const char *path = symname; |
| 3000 | if (pne) { |
| 3001 | path = pne->GetTitle(); |
| 3002 | } |
| 0453d10c |
3003 | else { |
| 3004 | continue; |
| 3005 | } |
| 9a96f175 |
3006 | if (!strstr(path,"ALIC")) { |
| 6a9169ee |
3007 | AliDebugClass(1,Form("Not a valid path: %s\n",path)); |
| 9a96f175 |
3008 | continue; |
| 3009 | } |
| 0a5f3331 |
3010 | if (!gGeoManager->cd(path)) { |
| 6a9169ee |
3011 | AliErrorClass(Form("Cannot go to path: %s\n",path)); |
| 9a96f175 |
3012 | continue; |
| 0a5f3331 |
3013 | } |
| c127f13a |
3014 | TGeoHMatrix *m = gGeoManager->GetCurrentMatrix(); |
| 25ca55ce |
3015 | |
| 3016 | TGeoRotation mchange; |
| 3017 | mchange.RotateY(90); |
| c127f13a |
3018 | mchange.RotateX(90); |
| 3019 | |
| c127f13a |
3020 | // |
| 3021 | // Cluster transformation matrix |
| 3022 | // |
| 3023 | TGeoHMatrix rotMatrix(mchange.Inverse()); |
| 3024 | rotMatrix.MultiplyLeft(m); |
| 030b4415 |
3025 | Double_t sectorAngle = 20.0 * (isector % 18) + 10.0; |
| c127f13a |
3026 | TGeoHMatrix rotSector; |
| b4a9cd27 |
3027 | rotSector.RotateZ(sectorAngle); |
| 8a497c18 |
3028 | rotMatrix.MultiplyLeft(&rotSector.Inverse()); |
| c127f13a |
3029 | |
| 225096c8 |
3030 | fgClusterMatrixArray->AddAt(new TGeoHMatrix(rotMatrix),lid); |
| bd0f8685 |
3031 | |
| 25ca55ce |
3032 | } |
| b4a9cd27 |
3033 | } |
| bd0f8685 |
3034 | |
| b4a9cd27 |
3035 | return kTRUE; |
| b4a9cd27 |
3036 | |
| bd0f8685 |
3037 | } |
| 25ca55ce |
3038 | |
| 9bf8c575 |
3039 | //_____________________________________________________________________________ |
| de406abf |
3040 | TGeoHMatrix *AliTRDgeometry::GetClusterMatrix(Int_t det) |
| 9bf8c575 |
3041 | { |
| 3042 | // |
| de406abf |
3043 | // Returns the cluster transformation matrix for a given detector |
| 9bf8c575 |
3044 | // |
| 3045 | |
| 225096c8 |
3046 | if (!fgClusterMatrixArray) { |
| de406abf |
3047 | if (!CreateClusterMatrixArray()) { |
| 3048 | return NULL; |
| 3049 | } |
| 9bf8c575 |
3050 | } |
| 225096c8 |
3051 | return (TGeoHMatrix *) fgClusterMatrixArray->At(det); |
| de406abf |
3052 | |
| 3053 | } |
| 3054 | |
| 3055 | //_____________________________________________________________________________ |
| 3056 | Bool_t AliTRDgeometry::ChamberInGeometry(Int_t det) |
| 3057 | { |
| 3058 | // |
| 3059 | // Checks whether the given detector is part of the current geometry |
| 3060 | // |
| 9bf8c575 |
3061 | |
| 3062 | if (!GetClusterMatrix(det)) { |
| 3063 | return kFALSE; |
| 3064 | } |
| 3065 | else { |
| 3066 | return kTRUE; |
| 3067 | } |
| 3068 | |
| 3069 | } |
| 2f504fcc |
3070 | |
| 3071 | //_____________________________________________________________________________ |
| 3072 | Bool_t AliTRDgeometry::IsHole(Int_t /*la*/, Int_t st, Int_t se) const |
| 3073 | { |
| 3074 | // |
| 3075 | // Checks for holes in front of PHOS |
| 3076 | // |
| 3077 | |
| 3078 | if (((se == 13) || (se == 14) || (se == 15)) && |
| 3079 | (st == 2)) { |
| 3080 | return kTRUE; |
| 3081 | } |
| 053a5ea0 |
3082 | |
| 2f504fcc |
3083 | return kFALSE; |
| 053a5ea0 |
3084 | |
| eb2b4f91 |
3085 | } |
| 2f504fcc |
3086 | |
| eb2b4f91 |
3087 | //_____________________________________________________________________________ |
| 3088 | Bool_t AliTRDgeometry::IsOnBoundary(Int_t det, Float_t y, Float_t z, Float_t eps) const |
| 3089 | { |
| 053a5ea0 |
3090 | // |
| 3091 | // Checks whether position is at the boundary of the sensitive volume |
| 3092 | // |
| 3093 | |
| eb2b4f91 |
3094 | Int_t ly = GetLayer(det); |
| 3095 | if ((ly < 0) || |
| 3096 | (ly >= fgkNlayer)) return kTRUE; |
| 3097 | |
| 3098 | Int_t stk = GetStack(det); |
| 3099 | if ((stk < 0) || |
| 3100 | (stk >= fgkNstack)) return kTRUE; |
| 3101 | |
| 225096c8 |
3102 | AliTRDpadPlane *pp = (AliTRDpadPlane*) fgPadPlaneArray->At(GetDetectorSec(ly, stk)); |
| eb2b4f91 |
3103 | if(!pp) return kTRUE; |
| 3104 | |
| 3105 | Double_t max = pp->GetRow0(); |
| 3106 | Int_t n = pp->GetNrows(); |
| 3107 | Double_t min = max - 2 * pp->GetLengthOPad() |
| 3108 | - (n-2) * pp->GetLengthIPad() |
| 3109 | - (n-1) * pp->GetRowSpacing(); |
| 3110 | if(z < min+eps || z > max-eps){ |
| 3111 | //printf("z : min[%7.2f (%7.2f)] %7.2f max[(%7.2f) %7.2f]\n", min, min+eps, z, max-eps, max); |
| 3112 | return kTRUE; |
| 3113 | } |
| 3114 | min = pp->GetCol0(); |
| 3115 | n = pp->GetNcols(); |
| 3116 | max = min +2 * pp->GetWidthOPad() |
| 3117 | + (n-2) * pp->GetWidthIPad() |
| 3118 | + (n-1) * pp->GetColSpacing(); |
| 3119 | if(y < min+eps || y > max-eps){ |
| 3120 | //printf("y : min[%7.2f (%7.2f)] %7.2f max[(%7.2f) %7.2f]\n", min, min+eps, y, max-eps, max); |
| 3121 | return kTRUE; |
| 3122 | } |
| 053a5ea0 |
3123 | |
| eb2b4f91 |
3124 | return kFALSE; |
| 053a5ea0 |
3125 | |
| 2f504fcc |
3126 | } |
git://git.uio.no / u / mrichter / AliRoot.git / blame