]>
Commit | Line | Data |
---|---|---|
16bf9884 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
88cb7938 | 16 | /* $Id$ */ |
16bf9884 | 17 | |
18 | /////////////////////////////////////////////////////////////////////////////// | |
19 | // // | |
0a770ac9 | 20 | // Detailed TRD geometry for the spaceframe without holes // |
16bf9884 | 21 | // // |
22 | /////////////////////////////////////////////////////////////////////////////// | |
23 | ||
88cb7938 | 24 | #include <TVirtualMC.h> |
16bf9884 | 25 | |
26 | #include "AliTRDgeometryDetail.h" | |
5443e65e | 27 | #include "AliTRDparameter.h" |
16bf9884 | 28 | |
29 | ClassImp(AliTRDgeometryDetail) | |
30 | ||
31 | //_____________________________________________________________________________ | |
32 | AliTRDgeometryDetail::AliTRDgeometryDetail():AliTRDgeometryFull() | |
33 | { | |
34 | // | |
35 | // AliTRDgeometryDetail default constructor | |
36 | // | |
37 | ||
38 | Init(); | |
39 | ||
40 | } | |
41 | ||
42 | //_____________________________________________________________________________ | |
43 | AliTRDgeometryDetail::~AliTRDgeometryDetail() | |
44 | { | |
45 | // | |
46 | // AliTRDgeometryDetail destructor | |
47 | // | |
48 | ||
49 | } | |
50 | ||
51 | //_____________________________________________________________________________ | |
52 | void AliTRDgeometryDetail::Init() | |
53 | { | |
54 | // | |
55 | // Initializes the geometry parameter | |
56 | // | |
57 | ||
58 | AliTRDgeometryFull::Init(); | |
59 | ||
60 | } | |
61 | ||
62 | //_____________________________________________________________________________ | |
63 | void AliTRDgeometryDetail::CreateGeometry(Int_t *idtmed) | |
64 | { | |
65 | // | |
66 | // Create the detailed TRD geometry without hole | |
0a770ac9 | 67 | // including the MCMs and the cooling pipes |
68 | // | |
69 | // | |
70 | // Names of the TRD volumina (xx = detector number): | |
71 | // | |
72 | // Lower part of the readout chambers (gas volume + radiator) | |
73 | // | |
74 | // UAxx Aluminum frames (Al) | |
75 | // UBxx G10 frames (C) | |
76 | // UCxx Inner volumes (Air) | |
77 | // | |
78 | // Upper part of the readout chambers (readout plane + fee) | |
79 | // | |
80 | // UDxx G10 frames (C) | |
81 | // UExx Inner volumes of the G10 (Air) | |
82 | // UFxx Aluminum frames (Al) | |
83 | // UGxx Inner volumes of the Al (Air) | |
84 | // | |
85 | // Inner material layers | |
86 | // | |
87 | // UHxx Radiator (Rohacell) | |
88 | // UIxx Entrance window (Mylar) | |
89 | // UJxx Drift volume (Xe/CO2) | |
90 | // UKxx Amplification volume (Xe/CO2) | |
91 | // ULxx Pad plane (Cu) | |
92 | // UMxx Support structure (Rohacell) | |
93 | // UNxx FEE + signal lines (Cu) | |
16bf9884 | 94 | // |
16bf9884 | 95 | |
96 | const Int_t kNparTrd = 4; | |
97 | const Int_t kNparCha = 3; | |
16bf9884 | 98 | |
0a770ac9 | 99 | Float_t xpos, ypos, zpos; |
100 | ||
16bf9884 | 101 | Float_t parTrd[kNparTrd]; |
102 | Float_t parCha[kNparCha]; | |
103 | ||
0a770ac9 | 104 | Char_t cTagV[5]; |
105 | Char_t cTagM[5]; | |
16bf9884 | 106 | |
0a770ac9 | 107 | Int_t idrotm; |
16bf9884 | 108 | |
0a770ac9 | 109 | // Rotation matrix |
110 | gMC->Matrix(idrotm, 0.0, 0.0, 90.0, 90.0, 90.0, 0.0); | |
16bf9884 | 111 | |
112 | // The TRD mother volume for one sector (Air), full length in z-direction | |
113 | parTrd[0] = fgkSwidth1/2.; | |
114 | parTrd[1] = fgkSwidth2/2.; | |
115 | parTrd[2] = fgkSlenTR1/2.; | |
116 | parTrd[3] = fgkSheight/2.; | |
0a770ac9 | 117 | gMC->Gsvolu("UTR1","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
118 | ||
119 | // Create the readout volumina | |
120 | CreateReadout(idtmed); | |
121 | ||
122 | // Create the volumina for the cooling | |
123 | CreateCooling(idtmed); | |
16bf9884 | 124 | |
0a770ac9 | 125 | for (Int_t icham = 0; icham < kNcham; icham++) { |
126 | for (Int_t iplan = 0; iplan < kNplan; iplan++) { | |
127 | ||
128 | Int_t iDet = GetDetectorSec(iplan,icham); | |
129 | ||
130 | // The lower part of the readout chambers (gas volume + radiator) | |
131 | // The aluminum frames | |
132 | sprintf(cTagV,"UA%02d",iDet); | |
133 | parCha[0] = fCwidth[iplan]/2.; | |
134 | parCha[1] = fClength[iplan][icham]/2. - fgkHspace/2.; | |
135 | parCha[2] = fgkCraH/2. + fgkCdrH/2.; | |
136 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); | |
137 | // The G10 frames | |
138 | sprintf(cTagV,"UB%02d",iDet); | |
139 | parCha[0] = fCwidth[iplan]/2. - fgkCalT; | |
140 | parCha[1] = -1.; | |
141 | parCha[2] = -1.; | |
142 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); | |
143 | // The inner part (air) | |
144 | sprintf(cTagV,"UC%02d",iDet); | |
145 | parCha[0] = fCwidth[iplan]/2. - fgkCalT - fgkCclsT; | |
146 | parCha[1] = fClength[iplan][icham]/2. - fgkHspace/2.- fgkCclfT; | |
147 | parCha[2] = -1.; | |
148 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); | |
149 | ||
150 | // The upper part of the readout chambers (readout plane + fee) | |
151 | // The G10 frames | |
152 | sprintf(cTagV,"UD%02d",iDet); | |
153 | parCha[0] = fCwidth[iplan]/2. + fgkCroW; | |
154 | parCha[1] = fClength[iplan][icham]/2. - fgkHspace/2.; | |
155 | parCha[2] = fgkCamH/2.; | |
156 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); | |
157 | // The inner part of the G10 frame (air) | |
158 | sprintf(cTagV,"UE%02d",iDet); | |
159 | parCha[0] = fCwidth[iplan]/2. + fgkCroW - fgkCcuT; | |
160 | parCha[1] = fClength[iplan][icham]/2. - fgkHspace/2.- fgkCcuT; | |
161 | parCha[2] = -1.; | |
162 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); | |
163 | // The aluminum frames | |
164 | sprintf(cTagV,"UF%02d",iDet); | |
165 | parCha[0] = fCwidth[iplan]/2. + fgkCroW; | |
166 | parCha[1] = fClength[iplan][icham]/2. - fgkHspace/2.; | |
167 | parCha[2] = fgkCroH/2.; | |
168 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); | |
169 | // The inner part of the aluminum frames | |
170 | sprintf(cTagV,"UG%02d",iDet); | |
171 | parCha[0] = fCwidth[iplan]/2. + fgkCroW - fgkCauT; | |
172 | parCha[1] = fClength[iplan][icham]/2. - fgkHspace/2.- fgkCauT; | |
173 | parCha[2] = -1.; | |
174 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); | |
175 | ||
176 | // The material layers inside the chambers | |
177 | parCha[0] = -1.; | |
178 | parCha[1] = -1.; | |
179 | // Rohacell layer (radiator) | |
180 | parCha[2] = fgkRaThick/2; | |
181 | sprintf(cTagV,"UH%02d",iDet); | |
182 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1315-1],parCha,kNparCha); | |
183 | // Mylar layer (entrance window + HV cathode) | |
184 | parCha[2] = fgkMyThick/2; | |
185 | sprintf(cTagV,"UI%02d",iDet); | |
186 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1308-1],parCha,kNparCha); | |
187 | // Xe/Isobutane layer (drift volume) | |
188 | parCha[2] = fgkDrThick/2.; | |
189 | sprintf(cTagV,"UJ%02d",iDet); | |
190 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha); | |
191 | // Xe/Isobutane layer (amplification volume) | |
192 | parCha[2] = fgkAmThick/2.; | |
193 | sprintf(cTagV,"UK%02d",iDet); | |
194 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha); | |
195 | // Cu layer (pad plane) | |
196 | parCha[2] = fgkCuThick/2; | |
197 | sprintf(cTagV,"UL%02d",iDet); | |
198 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1305-1],parCha,kNparCha); | |
199 | // G10 layer (support structure / honeycomb) | |
200 | parCha[2] = fgkSuThick/2; | |
201 | sprintf(cTagV,"UM%02d",iDet); | |
202 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1313-1],parCha,kNparCha); | |
203 | // Cu layer (FEE + signal lines) | |
204 | parCha[2] = fgkFeThick/2; | |
205 | sprintf(cTagV,"UN%02d",iDet); | |
206 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1305-1],parCha,kNparCha); | |
207 | ||
208 | // Position the layers in the chambers | |
209 | xpos = 0; | |
210 | ypos = 0; | |
211 | // Lower part | |
212 | // Rohacell layer (radiator) | |
213 | zpos = fgkRaZpos; | |
214 | sprintf(cTagV,"UH%02d",iDet); | |
215 | sprintf(cTagM,"UC%02d",iDet); | |
216 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
217 | // Mylar layer (entrance window + HV cathode) | |
218 | zpos = fgkMyZpos; | |
219 | sprintf(cTagV,"UI%02d",iDet); | |
220 | sprintf(cTagM,"UC%02d",iDet); | |
221 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
222 | // Xe/Isobutane layer (drift volume) | |
223 | zpos = fgkDrZpos; | |
224 | sprintf(cTagV,"UJ%02d",iDet); | |
225 | sprintf(cTagM,"UC%02d",iDet); | |
226 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
227 | // Upper part | |
228 | // Xe/Isobutane layer (amplification volume) | |
229 | zpos = fgkAmZpos; | |
230 | sprintf(cTagV,"UK%02d",iDet); | |
231 | sprintf(cTagM,"UE%02d",iDet); | |
232 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
233 | // Readout part | |
234 | // Cu layer (pad plane) | |
235 | zpos = fgkCuZpos; | |
236 | sprintf(cTagV,"UL%02d",iDet); | |
237 | sprintf(cTagM,"UG%02d",iDet); | |
238 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
239 | // G10 layer (support structure) | |
240 | zpos = fgkSuZpos; | |
241 | sprintf(cTagV,"UM%02d",iDet); | |
242 | sprintf(cTagM,"UG%02d",iDet); | |
243 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
244 | // Cu layer (FEE + signal lines) | |
245 | zpos = fgkFeZpos; | |
246 | sprintf(cTagV,"UN%02d",iDet); | |
247 | sprintf(cTagM,"UG%02d",iDet); | |
248 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
249 | ||
250 | // Position the inner volumes of the chambers in the frames | |
251 | xpos = 0.0; | |
252 | ypos = 0.0; | |
253 | zpos = 0.0; | |
254 | // The inside of the lower G10 frame | |
255 | sprintf(cTagV,"UC%02d",iDet); | |
256 | sprintf(cTagM,"UB%02d",iDet); | |
257 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
258 | // The lower G10 frame inside the aluminum frame | |
259 | sprintf(cTagV,"UB%02d",iDet); | |
260 | sprintf(cTagM,"UA%02d",iDet); | |
261 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
262 | // The inside of the upper G10 frame | |
263 | sprintf(cTagV,"UE%02d",iDet); | |
264 | sprintf(cTagM,"UD%02d",iDet); | |
265 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
266 | // The inside of the upper aluminum frame | |
267 | sprintf(cTagV,"UG%02d",iDet); | |
268 | sprintf(cTagM,"UF%02d",iDet); | |
269 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); | |
270 | ||
271 | // Position the frames of the chambers in the TRD mother volume | |
272 | xpos = 0.; | |
273 | ypos = - fClength[iplan][0] - fClength[iplan][1] - fClength[iplan][2]/2.; | |
274 | for (Int_t ic = 0; ic < icham; ic++) { | |
275 | ypos += fClength[iplan][ic]; | |
276 | } | |
277 | ypos += fClength[iplan][icham]/2.; | |
278 | zpos = fgkCraH/2. + fgkCdrH/2. - fgkSheight/2. + iplan * (fgkCH + fgkVspace); | |
279 | // The lower aluminum frame, radiator + drift region | |
280 | sprintf(cTagV,"UA%02d",iDet); | |
281 | gMC->Gspos(cTagV,1,"UTR1",xpos,ypos,zpos,0,"ONLY"); | |
282 | // The upper G10 frame, amplification region | |
283 | sprintf(cTagV,"UD%02d",iDet); | |
284 | zpos += fgkCamH/2. + fgkCraH/2. + fgkCdrH/2.; | |
285 | gMC->Gspos(cTagV,1,"UTR1",xpos,ypos,zpos,0,"ONLY"); | |
286 | // The upper aluminum frame | |
287 | sprintf(cTagV,"UF%02d",iDet); | |
288 | zpos += fgkCroH/2. + fgkCamH/2.; | |
289 | gMC->Gspos(cTagV,1,"UTR1",xpos,ypos,zpos,0,"ONLY"); | |
290 | ||
291 | // Position the MCM volumina | |
292 | PositionReadout(iplan,icham); | |
293 | ||
294 | // Position the volumina for the cooling | |
295 | PositionCooling(iplan,icham,idrotm); | |
296 | ||
297 | } | |
16bf9884 | 298 | } |
299 | ||
300 | xpos = 0.; | |
301 | ypos = 0.; | |
302 | zpos = 0.; | |
0a770ac9 | 303 | gMC->Gspos("UTR1",1,"BTR1",xpos,ypos,zpos,0,"ONLY"); |
304 | gMC->Gspos("UTR1",2,"BTR2",xpos,ypos,zpos,0,"ONLY"); | |
305 | gMC->Gspos("UTR1",3,"BTR3",xpos,ypos,zpos,0,"ONLY"); | |
16bf9884 | 306 | |
307 | } | |
308 | ||
309 | //_____________________________________________________________________________ | |
0a29d0f1 | 310 | void AliTRDgeometryDetail::CreateReadout(Int_t *idtmed) const |
16bf9884 | 311 | { |
312 | // | |
313 | // Create the volumina of the readout electronics | |
314 | // | |
16bf9884 | 315 | const Int_t kNparBox = 3; |
316 | ||
317 | Float_t parBox[kNparBox]; | |
318 | Float_t xpos = 0.0; | |
319 | Float_t ypos = 0.0; | |
320 | Float_t zpos = 0.0; | |
321 | ||
322 | // The mother volume for the MCMs + connectors (air) | |
323 | parBox[0] = 3.0/2.; | |
324 | parBox[1] = 3.4/2.; | |
325 | parBox[2] = 0.5/2.; | |
326 | gMC->Gsvolu("UMCM","BOX",idtmed[1302-1],parBox,kNparBox); | |
327 | ||
328 | // The MCM carrier G10 layer | |
329 | parBox[0] = 3.0/2.; | |
330 | parBox[1] = 3.0/2.; | |
331 | parBox[2] = 0.1/2.; | |
332 | gMC->Gsvolu("UMC1","BOX",idtmed[1319-1],parBox,kNparBox); | |
333 | // The MCM carrier Cu layer | |
334 | parBox[0] = 3.0/2.; | |
335 | parBox[1] = 3.0/2.; | |
336 | parBox[2] = 0.0034/2.; | |
337 | gMC->Gsvolu("UMC2","BOX",idtmed[1318-1],parBox,kNparBox); | |
338 | // The MCM carrier Sn layer | |
339 | parBox[0] = 3.0/2.; | |
340 | parBox[1] = 3.0/2.; | |
341 | parBox[2] = 0.004/2.; | |
342 | gMC->Gsvolu("UMC3","BOX",idtmed[1317-1],parBox,kNparBox); | |
343 | // The MCM carrier Al layer | |
344 | parBox[0] = 3.0/2.; | |
345 | parBox[1] = 3.0/2.; | |
346 | parBox[2] = 0.05/2.; | |
347 | gMC->Gsvolu("UMC4","BOX",idtmed[1316-1],parBox,kNparBox); | |
348 | ||
349 | // The epoxy of chip no.1 | |
350 | parBox[0] = 0.548/2.; | |
351 | parBox[1] = 0.548/2.; | |
352 | parBox[2] = 0.1/2.; | |
353 | gMC->Gsvolu("UCE1","BOX",idtmed[1321-1],parBox,kNparBox); | |
354 | // The silicon of chip no.1 | |
355 | parBox[0] = 0.316/2.; | |
356 | parBox[1] = 0.316/2.; | |
357 | parBox[2] = 0.03/2.; | |
358 | gMC->Gsvolu("UCS1","BOX",idtmed[1320-1],parBox,kNparBox); | |
359 | ||
360 | // The epoxy of chip no.2 | |
361 | parBox[0] = 1.549/2.; | |
362 | parBox[1] = 1.549/2.; | |
363 | parBox[2] = 0.1/2.; | |
364 | gMC->Gsvolu("UCE2","BOX",idtmed[1321-1],parBox,kNparBox); | |
365 | // The silicon of chip no.2 | |
366 | parBox[0] = 0.894/2.; | |
367 | parBox[1] = 0.894/2.; | |
368 | parBox[2] = 0.03/2.; | |
369 | gMC->Gsvolu("UCS2","BOX",idtmed[1320-1],parBox,kNparBox); | |
370 | ||
371 | // The PE of the connector | |
372 | parBox[0] = 2.25/2.; | |
373 | parBox[1] = 0.4/2.; | |
374 | parBox[2] = 0.3/2.; | |
375 | gMC->Gsvolu("UCN1","BOX",idtmed[1322-1],parBox,kNparBox); | |
376 | // The Cu of the connector | |
377 | parBox[0] = 2.25/2.; | |
378 | parBox[1] = 0.4/2.; | |
379 | parBox[2] = 0.005/2.; | |
380 | gMC->Gsvolu("UCN2","BOX",idtmed[1323-1],parBox,kNparBox); | |
381 | ||
382 | xpos = 0.0; | |
383 | ypos = -0.4/2.; | |
384 | zpos = -0.25 + 0.1/2.; | |
385 | gMC->Gspos("UMC1",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
386 | zpos += 0.1/2. + 0.0034/2.; | |
387 | gMC->Gspos("UMC2",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
388 | zpos += 0.0034/2 + 0.004/2.; | |
389 | gMC->Gspos("UMC3",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
390 | zpos += 0.004/2 + 0.05/2.; | |
391 | gMC->Gspos("UMC4",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
392 | zpos += 0.05/2. + 0.1/2.; | |
393 | xpos = 1.0; | |
394 | gMC->Gspos("UCE1",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
395 | xpos = -0.5; | |
396 | gMC->Gspos("UCE2",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
397 | zpos += 0.1/2. + 0.03/2.; | |
398 | xpos = 1.0; | |
399 | gMC->Gspos("UCS1",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
400 | xpos = -0.5; | |
401 | gMC->Gspos("UCS2",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
402 | xpos = 0.0; | |
403 | ypos = 3.4/2. - 0.4/2.; | |
404 | zpos = -0.25 + 0.3/2.; | |
405 | gMC->Gspos("UCN1",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
406 | zpos += 0.3/2. + 0.005/2.; | |
407 | gMC->Gspos("UCN2",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); | |
408 | ||
409 | } | |
410 | ||
411 | //_____________________________________________________________________________ | |
412 | void AliTRDgeometryDetail::PositionReadout(Int_t ipla, Int_t icha) | |
413 | { | |
414 | // | |
415 | // Position the volumina inside the readout mother volume | |
416 | // | |
417 | ||
0a770ac9 | 418 | const Int_t kNmcmChannel = 18; |
16bf9884 | 419 | |
5443e65e | 420 | AliTRDparameter *parameter = new AliTRDparameter(); |
421 | ||
422 | Int_t nMCMrow = parameter->GetRowMax(ipla,icha,0); | |
423 | Int_t nMCMcol = parameter->GetColMax(ipla) / kNmcmChannel; | |
0a770ac9 | 424 | |
425 | Float_t xSize = (GetChamberWidth(ipla) - 2.*fgkCpadW) | |
426 | / ((Float_t) nMCMcol); | |
427 | Float_t ySize = (GetChamberLength(ipla,icha) - 2.*fgkRpadW) | |
428 | / ((Float_t) nMCMrow); | |
5443e65e | 429 | Float_t x0 = parameter->GetCol0(ipla); |
430 | Float_t y0 = parameter->GetRow0(ipla,icha,0); | |
16bf9884 | 431 | |
432 | Int_t iCopy = GetDetector(ipla,icha,0) * 1000; | |
433 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { | |
434 | for (Int_t iMCMcol = 0; iMCMcol < nMCMcol; iMCMcol++) { | |
435 | iCopy++; | |
436 | Float_t xpos = (0.5 + iMCMcol) * xSize + x0; | |
437 | Float_t ypos = (0.5 + iMCMrow) * ySize + y0; | |
0a770ac9 | 438 | Float_t zpos = fgkCH - fgkSheight/2. + 0.5/2. |
439 | + ipla * (fgkCH + fgkVspace); | |
440 | gMC->Gspos("UMCM",iCopy,"UTR1",xpos,ypos,zpos,0,"ONLY"); | |
16bf9884 | 441 | } |
442 | } | |
443 | ||
5443e65e | 444 | delete parameter; |
445 | ||
16bf9884 | 446 | } |
447 | ||
448 | //_____________________________________________________________________________ | |
0a29d0f1 | 449 | void AliTRDgeometryDetail::CreateCooling(Int_t *idtmed) const |
16bf9884 | 450 | { |
451 | // | |
452 | // Create the volumina of the cooling | |
453 | // | |
454 | ||
0a770ac9 | 455 | const Int_t kNparTube = 3; |
16bf9884 | 456 | |
0a770ac9 | 457 | Float_t parTube[kNparTube]; |
458 | Float_t xpos; | |
459 | Float_t ypos; | |
460 | Float_t zpos; | |
16bf9884 | 461 | |
462 | // The aluminum pipe for the cooling | |
0a770ac9 | 463 | parTube[0] = 0.0; |
464 | parTube[1] = 0.0; | |
465 | parTube[2] = 0.0; | |
466 | gMC->Gsvolu("UCOA","TUBE",idtmed[1324-1],parTube,0); | |
16bf9884 | 467 | |
468 | // The cooling water | |
0a770ac9 | 469 | parTube[0] = 0.0; |
470 | parTube[1] = 0.2/2.; | |
471 | parTube[2] = -1.; | |
472 | gMC->Gsvolu("UCOW","TUBE",idtmed[1314-1],parTube,kNparTube); | |
473 | ||
474 | // Water inside the cooling pipe | |
475 | xpos = 0.0; | |
476 | ypos = 0.0; | |
477 | zpos = 0.0; | |
16bf9884 | 478 | gMC->Gspos("UCOW",1,"UCOA",xpos,ypos,zpos,0,"ONLY"); |
479 | ||
480 | } | |
481 | ||
482 | //_____________________________________________________________________________ | |
0a770ac9 | 483 | void AliTRDgeometryDetail::PositionCooling(Int_t ipla, Int_t icha, Int_t idrotm) |
16bf9884 | 484 | { |
485 | // | |
486 | // Position the volumina of the cooling | |
487 | // | |
488 | ||
0a770ac9 | 489 | const Int_t kNpar = 3; |
16bf9884 | 490 | |
491 | Float_t par[kNpar]; | |
0a770ac9 | 492 | Float_t xpos; |
493 | Float_t ypos; | |
494 | Float_t zpos; | |
16bf9884 | 495 | |
5443e65e | 496 | AliTRDparameter *parameter = new AliTRDparameter(); |
497 | ||
16bf9884 | 498 | Int_t iCopy = GetDetector(ipla,icha,0) * 100; |
5443e65e | 499 | Int_t nMCMrow = parameter->GetRowMax(ipla,icha,0); |
16bf9884 | 500 | |
0a770ac9 | 501 | Float_t ySize = (GetChamberLength(ipla,icha) - 2.*fgkRpadW) |
502 | / ((Float_t) nMCMrow); | |
5443e65e | 503 | Float_t y0 = parameter->GetRow0(ipla,icha,0); |
16bf9884 | 504 | |
505 | // Position the cooling pipes | |
506 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { | |
507 | ||
508 | xpos = 0.0; | |
0a770ac9 | 509 | ypos = (0.5 + iMCMrow) * ySize + y0 - 1.9; |
510 | zpos = fgkCH - fgkSheight/2. + 0.5/2. | |
511 | + ipla * (fgkCH + fgkVspace); | |
512 | par[0] = 0.0; | |
16bf9884 | 513 | par[1] = 0.3/2.; |
0a770ac9 | 514 | par[2] = GetChamberWidth(ipla)/2.+ fgkCroW; |
515 | gMC->Gsposp("UCOA",iCopy+iMCMrow,"UTR1",xpos,ypos,zpos | |
516 | ,idrotm,"ONLY",par,kNpar); | |
16bf9884 | 517 | |
518 | } | |
519 | ||
5443e65e | 520 | delete parameter; |
521 | ||
16bf9884 | 522 | } |