[u/mrichter/AliRoot.git] / test / generators / TUHKMgen / Config.C

// One can use the configuration macro in compiled mode by
// root [0] gSystem->Load("libgeant321");
// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
//                   -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
// root [0] .x grun.C(1,"Config.C++")

#if !defined(__CINT__) || defined(__MAKECINT__)
#include <Riostream.h>
#include <TPDGCode.h>
#include <TRandom.h>
#include <TSystem.h>
#include <TVirtualMC.h>
#include <TGeant3TGeo.h>
#include "STEER/AliRunLoader.h"
#include "STEER/AliRun.h"
#include "STEER/AliConfig.h"
#include "PYTHIA6/AliDecayerPythia.h"
#include "EVGEN/AliGenCocktail.h"
#include "EVGEN/AliGenHIJINGpara.h"
#include "STEER/AliMagF.h"
#include "STRUCT/AliBODY.h"
#include "STRUCT/AliMAG.h"
#include "STRUCT/AliABSOv3.h"
#include "STRUCT/AliDIPOv3.h"
#include "STRUCT/AliHALLv3.h"
#include "STRUCT/AliFRAMEv2.h"
#include "STRUCT/AliSHILv3.h"
#include "STRUCT/AliPIPEv3.h"
#include "ITS/AliITSv11Hybrid.h"
#include "TPC/AliTPCv2.h"
#include "TOF/AliTOFv6T0.h"
#include "HMPID/AliHMPIDv3.h"
#include "ZDC/AliZDCv3.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv1.h"
#include "MUON/AliMUONv1.h"
#include "PHOS/AliPHOSv1.h"
#include "PMD/AliPMDv1.h"
#include "T0/AliT0v1.h"
#include "EMCAL/AliEMCALv2.h"
#include "ACORDE/AliACORDEv1.h"
#include "VZERO/AliVZEROv7.h"
#endif

enum PprTrigConf_t
{
    kDefaultPPTrig, kDefaultPbPbTrig
};

const char * pprTrigConfName[] = {
    "p-p","Pb-Pb"
};

static PprTrigConf_t strig = kDefaultPbPbTrig;
Float_t EtaToTheta(Float_t arg);
void    LoadPythia();


void Config()
{
    // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
    // Theta range given through pseudorapidity limits 22/6/2001

    // Set Random Number seed
  //gRandom->SetSeed(123456); // Set 0 to use the current time

  AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);

  // Load Pythia libraries
  LoadPythia();
  // Libraries required by geant321
#if defined(__CINT__)
    gSystem->Load("libgeant321");
#endif

    new     TGeant3TGeo("C++ Interface to Geant3");

    AliRunLoader* rl=0x0;

    AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);

    rl = AliRunLoader::Open("galice.root",
          AliConfig::GetDefaultEventFolderName(),
          "recreate");
    if (rl == 0x0)
      {
  gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
  return;
      }
    rl->SetCompressionLevel(2);
    rl->SetNumberOfEventsPerFile(3);
    gAlice->SetRunLoader(rl);


    // gAlice->SetGeometryFromFile("geometry.root");

    // Uncomment if you want to load geometry from OCDB!   >>>>
/*
    if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
   cout << "#####################################################" << endl;
   cout << "#                                                   #" << endl;
   cout << "#     WARNING: CDB DEFAULT STORAGE NOT SET !!!      #" << endl;
   cout << "#     SETTING IT TO local://$ALICE_ROOT/OCDB !!!         #" << endl;
   cout << "#                                                   #" << endl;
   cout << "#####################################################" << endl;

         AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT/OCDB");
    }

    if(AliCDBManager::Instance()->GetRun() < 0){
   cout << "#####################################################" << endl;
   cout << "#                                                   #" << endl;
   cout << "#     WARNING: RUN NUMBER NOT SET !!!               #" << endl;
   cout << "#     SETTING IT TO 0 !!!                           #" << endl;
   cout << "#                                                   #" << endl;
   cout << "#####################################################" << endl;

         AliCDBManager::Instance()->SetRun(0);
    }
    gAlice->SetGeometryFromCDB();
*/


    // Set the trigger configuration
    gAlice->SetTriggerDescriptor(pprTrigConfName[strig]);
    cout<<"Trigger configuration is set to  "<<pprTrigConfName[strig]<<endl;

    //
    // Set External decayer
    TVirtualMCDecayer *decayer = new AliDecayerPythia();

    decayer->SetForceDecay(kAll);
    decayer->Init();
    gMC->SetExternalDecayer(decayer);
    //=======================================================================
    // ************* STEERING parameters FOR ALICE SIMULATION **************
    // --- Specify event type to be tracked through the ALICE setup
    // --- All positions are in cm, angles in degrees, and P and E in GeV


    gMC->SetProcess("DCAY",1);
    gMC->SetProcess("PAIR",1);
    gMC->SetProcess("COMP",1);
    gMC->SetProcess("PHOT",1);
    gMC->SetProcess("PFIS",0);
    gMC->SetProcess("DRAY",0);
    gMC->SetProcess("ANNI",1);
    gMC->SetProcess("BREM",1);
    gMC->SetProcess("MUNU",1);
    gMC->SetProcess("CKOV",1);
    gMC->SetProcess("HADR",1);
    gMC->SetProcess("LOSS",2);
    gMC->SetProcess("MULS",1);
    gMC->SetProcess("RAYL",1);

    Float_t cut = 1.e-3;        // 1MeV cut by default
    Float_t tofmax = 1.e10;

    gMC->SetCut("CUTGAM", cut);
    gMC->SetCut("CUTELE", cut);
    gMC->SetCut("CUTNEU", cut);
    gMC->SetCut("CUTHAD", cut);
    gMC->SetCut("CUTMUO", cut);
    gMC->SetCut("BCUTE",  cut); 
    gMC->SetCut("BCUTM",  cut); 
    gMC->SetCut("DCUTE",  cut); 
    gMC->SetCut("DCUTM",  cut); 
    gMC->SetCut("PPCUTM", cut);
    gMC->SetCut("TOFMAX", tofmax); 

    int nParticles = 100;
      if (gSystem->Getenv("CONFIG_NPARTICLES"))
      {
        nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
      }

    AliGenCocktail *gener = new AliGenCocktail();
    gener->SetPhiRange(0, 360);
    // Set pseudorapidity range from -8 to 8.
    Float_t thmin = EtaToTheta(8);   // theta min. <---> eta max
    Float_t thmax = EtaToTheta(-8);  // theta max. <---> eta min
    gener->SetThetaRange(thmin,thmax);
    gener->SetOrigin(0, 0, 0);  //vertex position
    gener->SetSigma(0, 0, 0);   //Sigma in (X,Y,Z) (cm) on IP position

    gSystem->Load("libTUHKMgen");
    AliGenUHKM *tuhkMgen = new AliGenUHKM(nParticles);
    tuhkMgen->SetAllParametersLHC();
    gener->AddGenerator(tuhkMgen,"TUHKM",1);

    gener->Init();

    //
    // Activate this line if you want the vertex smearing to happen
    // track by track
    //
    //gener->SetVertexSmear(perTrack);
    // Field (L3 0.4 T)
    TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", -1., -1., AliMagF::k5kG));

    Int_t   iABSO   = 1;
    Int_t   iDIPO   = 1;
    Int_t   iFMD    = 1;
    Int_t   iFRAME  = 1;
    Int_t   iHALL   = 1;
    Int_t   iITS    = 1;
    Int_t   iMAG    = 1;
    Int_t   iMUON   = 1;
    Int_t   iPHOS   = 1;
    Int_t   iPIPE   = 1;
    Int_t   iPMD    = 1;
    Int_t   iHMPID  = 1;
    Int_t   iSHIL   = 1;
    Int_t   iT0     = 1;
    Int_t   iTOF    = 1;
    Int_t   iTPC    = 1;
    Int_t   iTRD    = 1;
    Int_t   iZDC    = 1;
    Int_t   iEMCAL  = 1;
    Int_t   iACORDE = 1;
    Int_t   iVZERO  = 1;
    rl->CdGAFile();
    //=================== Alice BODY parameters =============================
    AliBODY *BODY = new AliBODY("BODY", "Alice envelop");

    if (iMAG)
    {
        //=================== MAG parameters ============================
        // --- Start with Magnet since detector layouts may be depending ---
        // --- on the selected Magnet dimensions ---
        AliMAG *MAG = new AliMAG("MAG", "Magnet");
    }


    if (iABSO)
    {
        //=================== ABSO parameters ============================
        AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
    }

    if (iDIPO)
    {
        //=================== DIPO parameters ============================

        AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
    }

    if (iHALL)
    {
        //=================== HALL parameters ============================

        AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
    }


    if (iFRAME)
    {
        //=================== FRAME parameters ============================

        AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
  FRAME->SetHoles(1);
    }

    if (iSHIL)
    {
        //=================== SHIL parameters ============================

        AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
    }


    if (iPIPE)
    {
        //=================== PIPE parameters ============================

        AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
    }
 
    if (iITS)
    {
        //=================== ITS parameters ============================

  AliITS *ITS  = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
    }

    if (iTPC)
    {
        //============================ TPC parameters ===================
        AliTPC *TPC = new AliTPCv2("TPC", "Default");
    }


    if (iTOF) {
        //=================== TOF parameters ============================
  AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
    }


    if (iHMPID)
    {
        //=================== HMPID parameters ===========================
        AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");

    }


    if (iZDC)
    {
        //=================== ZDC parameters ============================

        AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
    }

    if (iTRD)
    {
        //=================== TRD parameters ============================

        AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
    }

    if (iFMD)
    {
        //=================== FMD parameters ============================
  AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
   }

    if (iMUON)
    {
        //=================== MUON parameters ===========================
        // New MUONv1 version (geometry defined via builders)
        AliMUON *MUON = new AliMUONv1("MUON", "default");
    }
    //=================== PHOS parameters ===========================

    if (iPHOS)
    {
        AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
    }


    if (iPMD)
    {
        //=================== PMD parameters ============================
        AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
    }

    if (iT0)
    {
        //=================== T0 parameters ============================
        AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
    }

    if (iEMCAL)
    {
        //=================== EMCAL parameters ============================
        AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
    }

     if (iACORDE)
    {
        //=================== ACORDE parameters ============================
        AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
    }

     if (iVZERO)
    {
        //=================== VZERO parameters ============================
        AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
    }

     AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);

}

Float_t EtaToTheta(Float_t arg){
  return (180./TMath::Pi())*2.*atan(exp(-arg));
}


void LoadPythia()
{
    // Load Pythia related libraries
    gSystem->Load("liblhapdf.so");      // Parton density functions
    gSystem->Load("libEGPythia6.so");   // TGenerator interface
    gSystem->Load("libpythia6.so");     // Pythia
    gSystem->Load("libAliPythia6.so");  // ALICE specific implementations
}
Commit	Line	Data
97bd8e56	1	// One can use the configuration macro in compiled mode by
	2	// root [0] gSystem->Load("libgeant321");
	3	// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
	4	// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
	5	// root [0] .x grun.C(1,"Config.C++")
	6
	7	#if !defined(__CINT__) \|\| defined(__MAKECINT__)
	8	#include <Riostream.h>
	9	#include <TPDGCode.h>
	10	#include <TRandom.h>
	11	#include <TSystem.h>
	12	#include <TVirtualMC.h>
	13	#include <TGeant3TGeo.h>
	14	#include "STEER/AliRunLoader.h"
	15	#include "STEER/AliRun.h"
	16	#include "STEER/AliConfig.h"
	17	#include "PYTHIA6/AliDecayerPythia.h"
	18	#include "EVGEN/AliGenCocktail.h"
	19	#include "EVGEN/AliGenHIJINGpara.h"
	20	#include "STEER/AliMagF.h"
	21	#include "STRUCT/AliBODY.h"
	22	#include "STRUCT/AliMAG.h"
	23	#include "STRUCT/AliABSOv3.h"
	24	#include "STRUCT/AliDIPOv3.h"
	25	#include "STRUCT/AliHALLv3.h"
	26	#include "STRUCT/AliFRAMEv2.h"
	27	#include "STRUCT/AliSHILv3.h"
	28	#include "STRUCT/AliPIPEv3.h"
	29	#include "ITS/AliITSv11Hybrid.h"
	30	#include "TPC/AliTPCv2.h"
	31	#include "TOF/AliTOFv6T0.h"
	32	#include "HMPID/AliHMPIDv3.h"
	33	#include "ZDC/AliZDCv3.h"
	34	#include "TRD/AliTRDv1.h"
	35	#include "FMD/AliFMDv1.h"
	36	#include "MUON/AliMUONv1.h"
	37	#include "PHOS/AliPHOSv1.h"
	38	#include "PMD/AliPMDv1.h"
	39	#include "T0/AliT0v1.h"
	40	#include "EMCAL/AliEMCALv2.h"
	41	#include "ACORDE/AliACORDEv1.h"
	42	#include "VZERO/AliVZEROv7.h"
	43	#endif
	44
	45	enum PprTrigConf_t
	46	{
	47	kDefaultPPTrig, kDefaultPbPbTrig
	48	};
	49
	50	const char * pprTrigConfName[] = {
	51	"p-p","Pb-Pb"
	52	};
	53
	54	static PprTrigConf_t strig = kDefaultPbPbTrig;
	55	Float_t EtaToTheta(Float_t arg);
	56	void LoadPythia();
	57
	58
	59	void Config()
	60	{
	61	// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
	62	// Theta range given through pseudorapidity limits 22/6/2001
	63
	64	// Set Random Number seed
65	//gRandom->SetSeed(123456); // Set 0 to use the current time
66
67	AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);
68
69	// Load Pythia libraries
70	LoadPythia();
71	// Libraries required by geant321
72	#if defined(__CINT__)
73	gSystem->Load("libgeant321");
74	#endif
75
76	new TGeant3TGeo("C++ Interface to Geant3");
77
78	AliRunLoader* rl=0x0;
79
80	AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
81
82	rl = AliRunLoader::Open("galice.root",
83	AliConfig::GetDefaultEventFolderName(),
84	"recreate");
85	if (rl == 0x0)
86	{
87	gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
88	return;
89	}
90	rl->SetCompressionLevel(2);
91	rl->SetNumberOfEventsPerFile(3);
92	gAlice->SetRunLoader(rl);
93
94
95
96	// gAlice->SetGeometryFromFile("geometry.root");
97
98	// Uncomment if you want to load geometry from OCDB! >>>>
99	/*
100	if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
101	cout << "#####################################################" << endl;
102	cout << "# #" << endl;
103	cout << "# WARNING: CDB DEFAULT STORAGE NOT SET !!! #" << endl;
104	cout << "# SETTING IT TO local://$ALICE_ROOT/OCDB !!! #" << endl;
105	cout << "# #" << endl;
106	cout << "#####################################################" << endl;
107
108	AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT/OCDB");
109	}
110
111	if(AliCDBManager::Instance()->GetRun() < 0){
112	cout << "#####################################################" << endl;
113	cout << "# #" << endl;
114	cout << "# WARNING: RUN NUMBER NOT SET !!! #" << endl;
115	cout << "# SETTING IT TO 0 !!! #" << endl;
116	cout << "# #" << endl;
117	cout << "#####################################################" << endl;
118
119	AliCDBManager::Instance()->SetRun(0);
120	}
121	gAlice->SetGeometryFromCDB();
122	*/
123
124
125
126	// Set the trigger configuration
127	gAlice->SetTriggerDescriptor(pprTrigConfName[strig]);
128	cout<<"Trigger configuration is set to "<<pprTrigConfName[strig]<<endl;
129
130	//
131	// Set External decayer
132	TVirtualMCDecayer *decayer = new AliDecayerPythia();
133
134	decayer->SetForceDecay(kAll);
135	decayer->Init();
136	gMC->SetExternalDecayer(decayer);
137	//=======================================================================
138	// *********** STEERING parameters FOR ALICE SIMULATION ************
139	// --- Specify event type to be tracked through the ALICE setup
140	// --- All positions are in cm, angles in degrees, and P and E in GeV
141
142
143	gMC->SetProcess("DCAY",1);
144	gMC->SetProcess("PAIR",1);
145	gMC->SetProcess("COMP",1);
146	gMC->SetProcess("PHOT",1);
147	gMC->SetProcess("PFIS",0);
148	gMC->SetProcess("DRAY",0);
149	gMC->SetProcess("ANNI",1);
150	gMC->SetProcess("BREM",1);
151	gMC->SetProcess("MUNU",1);
152	gMC->SetProcess("CKOV",1);
153	gMC->SetProcess("HADR",1);
154	gMC->SetProcess("LOSS",2);
155	gMC->SetProcess("MULS",1);
156	gMC->SetProcess("RAYL",1);
157
158	Float_t cut = 1.e-3; // 1MeV cut by default
159	Float_t tofmax = 1.e10;
160
161	gMC->SetCut("CUTGAM", cut);
162	gMC->SetCut("CUTELE", cut);
163	gMC->SetCut("CUTNEU", cut);
164	gMC->SetCut("CUTHAD", cut);
165	gMC->SetCut("CUTMUO", cut);
166	gMC->SetCut("BCUTE", cut);
167	gMC->SetCut("BCUTM", cut);
168	gMC->SetCut("DCUTE", cut);
169	gMC->SetCut("DCUTM", cut);
170	gMC->SetCut("PPCUTM", cut);
171	gMC->SetCut("TOFMAX", tofmax);
172
173	int nParticles = 100;
174	if (gSystem->Getenv("CONFIG_NPARTICLES"))
175	{
176	nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
177	}
178
179	AliGenCocktail *gener = new AliGenCocktail();
180	gener->SetPhiRange(0, 360);
181	// Set pseudorapidity range from -8 to 8.
182	Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
183	Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
184	gener->SetThetaRange(thmin,thmax);
185	gener->SetOrigin(0, 0, 0); //vertex position
186	gener->SetSigma(0, 0, 0); //Sigma in (X,Y,Z) (cm) on IP position
187
188	gSystem->Load("libTUHKMgen");
189	AliGenUHKM *tuhkMgen = new AliGenUHKM(nParticles);
190	tuhkMgen->SetAllParametersLHC();
191	gener->AddGenerator(tuhkMgen,"TUHKM",1);
192
193	gener->Init();
194
195	//
196	// Activate this line if you want the vertex smearing to happen
197	// track by track
198	//
199	//gener->SetVertexSmear(perTrack);
200	// Field (L3 0.4 T)
201	TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", -1., -1., AliMagF::k5kG));
202
203	Int_t iABSO = 1;
204	Int_t iDIPO = 1;
205	Int_t iFMD = 1;
206	Int_t iFRAME = 1;
207	Int_t iHALL = 1;
208	Int_t iITS = 1;
209	Int_t iMAG = 1;
210	Int_t iMUON = 1;
211	Int_t iPHOS = 1;
212	Int_t iPIPE = 1;
213	Int_t iPMD = 1;
214	Int_t iHMPID = 1;
215	Int_t iSHIL = 1;
216	Int_t iT0 = 1;
217	Int_t iTOF = 1;
218	Int_t iTPC = 1;
219	Int_t iTRD = 1;
220	Int_t iZDC = 1;
221	Int_t iEMCAL = 1;
222	Int_t iACORDE = 1;
223	Int_t iVZERO = 1;
224	rl->CdGAFile();
225	//=================== Alice BODY parameters =============================
226	AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
227
228	if (iMAG)
229	{
230	//=================== MAG parameters ============================
231	// --- Start with Magnet since detector layouts may be depending ---
232	// --- on the selected Magnet dimensions ---
233	AliMAG *MAG = new AliMAG("MAG", "Magnet");
234	}
235
236
237	if (iABSO)
238	{
239	//=================== ABSO parameters ============================
240	AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
241	}
242
243	if (iDIPO)
244	{
245	//=================== DIPO parameters ============================
246
247	AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
248	}
249
250	if (iHALL)
251	{
252	//=================== HALL parameters ============================
253
254	AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
255	}
256
257
258	if (iFRAME)
259	{
260	//=================== FRAME parameters ============================
261
262	AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
263	FRAME->SetHoles(1);
264	}
265
266	if (iSHIL)
267	{
268	//=================== SHIL parameters ============================
269
270	AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
271	}
272
273
274	if (iPIPE)
275	{
276	//=================== PIPE parameters ============================
277
278	AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
279	}
280
281	if (iITS)
282	{
283	//=================== ITS parameters ============================
284
285	AliITS *ITS = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
286	}
287
288	if (iTPC)
289	{
290	//============================ TPC parameters ===================
291	AliTPC *TPC = new AliTPCv2("TPC", "Default");
292	}
293
294
295	if (iTOF) {
296	//=================== TOF parameters ============================
297	AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
298	}
299
300
301	if (iHMPID)
302	{
303	//=================== HMPID parameters ===========================
304	AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
305
306	}
307
308
309	if (iZDC)
310	{
311	//=================== ZDC parameters ============================
312
313	AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
314	}
315
316	if (iTRD)
317	{
318	//=================== TRD parameters ============================
319
320	AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
321	}
322
323	if (iFMD)
324	{
325	//=================== FMD parameters ============================
326	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
327	}
328
329	if (iMUON)
330	{
331	//=================== MUON parameters ===========================
332	// New MUONv1 version (geometry defined via builders)
333	AliMUON *MUON = new AliMUONv1("MUON", "default");
334	}
335	//=================== PHOS parameters ===========================
336
337	if (iPHOS)
338	{
339	AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
340	}
341
342
343	if (iPMD)
344	{
345	//=================== PMD parameters ============================
346	AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
347	}
348
349	if (iT0)
350	{
351	//=================== T0 parameters ============================
352	AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
353	}
354
355	if (iEMCAL)
356	{
357	//=================== EMCAL parameters ============================
358	AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
359	}
360
361	if (iACORDE)
362	{
363	//=================== ACORDE parameters ============================
364	AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
365	}
366
367	if (iVZERO)
368	{
369	//=================== VZERO parameters ============================
370	AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
371	}
372
373	AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
374
375	}
376
377	Float_t EtaToTheta(Float_t arg){
378	return (180./TMath::Pi())2.atan(exp(-arg));
379	}
380
381
382	void LoadPythia()
383	{
384	// Load Pythia related libraries
385	gSystem->Load("liblhapdf.so"); // Parton density functions
386	gSystem->Load("libEGPythia6.so"); // TGenerator interface
387	gSystem->Load("libpythia6.so"); // Pythia
388	gSystem->Load("libAliPythia6.so"); // ALICE specific implementations
389	}