]>
Commit | Line | Data |
---|---|---|
1 | /************************************************************************** | |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
18 | Revision 1.17 2001/06/21 11:59:25 morsch | |
19 | Some more details in compensator geometry. | |
20 | ||
21 | Revision 1.16 2001/06/20 16:07:08 morsch | |
22 | Compensator dipole MBWMD (MCB@SPS) added. | |
23 | ||
24 | Revision 1.15 2001/03/16 15:34:37 morsch | |
25 | Mothervolume defined MANY because overlap with station 3 mothervolume not avoidable (A. de Falco) | |
26 | ||
27 | Revision 1.14 2000/12/21 16:37:23 morsch | |
28 | Use Al for coil and cable material. The materials used before cause the dipole to | |
29 | have hydrogene on the outer surface leading to unrealistic gamma rates due to | |
30 | n-capture. | |
31 | ||
32 | Revision 1.13 2000/10/02 21:28:15 fca | |
33 | Removal of useless dependecies via forward declarations | |
34 | ||
35 | Revision 1.12 2000/06/20 10:53:01 morsch | |
36 | Volume placed outside mother volume (DDIP) corrected (Galina Chabratova) | |
37 | ||
38 | Revision 1.11 2000/06/11 12:33:46 morsch | |
39 | Coding rule violations corrected | |
40 | ||
41 | Revision 1.10 2000/06/09 19:32:56 morsch | |
42 | New detailed and corrected version from Galina Chabratova | |
43 | ||
44 | Revision 1.9 2000/04/27 09:29:53 fca | |
45 | Reverting to version 1.6.2 | |
46 | ||
47 | Revision 1.6.2.1 1999/12/03 16:38:51 fca | |
48 | Correct overlap in magnet | |
49 | ||
50 | Revision 1.6 1999/09/29 09:24:30 fca | |
51 | Introduction of the Copyright and cvs Log | |
52 | ||
53 | */ | |
54 | ||
55 | /////////////////////////////////////////////////////////////////////////////// | |
56 | // // | |
57 | // Magnetic Dipole version 1 // | |
58 | // // | |
59 | //Begin_Html | |
60 | /* | |
61 | <img src="picts/AliDIPOv2Class.gif"> | |
62 | </pre> | |
63 | <br clear=left> | |
64 | <font size=+2 color=red> | |
65 | <p>The responsible person for this module is | |
66 | <a href="mailto:andreas.morsch@cern.ch">Andreas Morsch</a>. | |
67 | </font> | |
68 | <pre> | |
69 | */ | |
70 | //End_Html | |
71 | // // | |
72 | // // | |
73 | ||
74 | #include "AliDIPOv2.h" | |
75 | #include "AliRun.h" | |
76 | #include "AliMC.h" | |
77 | #include "AliMagF.h" | |
78 | #include "AliConst.h" | |
79 | ||
80 | ClassImp(AliDIPOv2) | |
81 | ||
82 | //_____________________________________________________________________________ | |
83 | AliDIPOv2::AliDIPOv2() | |
84 | { | |
85 | // | |
86 | // Last design of magnetic dipole version 2 | |
87 | // | |
88 | } | |
89 | ||
90 | //_____________________________________________________________________________ | |
91 | AliDIPOv2::AliDIPOv2(const char *name, const char *title) | |
92 | : AliDIPO(name,title) | |
93 | { | |
94 | // | |
95 | // Standard constructor for the magnetic dipole version 2 | |
96 | SetMarkerColor(7); | |
97 | SetMarkerStyle(2); | |
98 | SetMarkerSize(0.4); | |
99 | } | |
100 | ||
101 | void AliDIPOv2::CreateGeometry() | |
102 | { | |
103 | // | |
104 | // Creation of the geometry of the magnetic DIPOLE version 2 | |
105 | // | |
106 | ||
107 | CreateSpectrometerDipole(); | |
108 | CreateCompensatorDipole(); | |
109 | } | |
110 | ||
111 | ||
112 | //_____________________________________________________________________________ | |
113 | void AliDIPOv2::CreateSpectrometerDipole() | |
114 | { | |
115 | // | |
116 | // Creation of the geometry of the magnetic DIPOLE version 2 | |
117 | // | |
118 | ||
119 | // AliMC* gMC = AliMC::GetMC(); | |
120 | ||
121 | Float_t cpar[5], tpar[18], ypar[12]; | |
122 | Float_t dz, dx, dy; | |
123 | Int_t idrotm[1899]; | |
124 | Float_t accMax, the1, phi1, the2, phi2, the3, phi3; | |
125 | ||
126 | Int_t *idtmed = fIdtmed->GetArray()-1799; | |
127 | ||
128 | // const Int_t kCoil = 1813; | |
129 | // const Int_t kCable= 1811; | |
130 | ||
131 | const Int_t kCoil = 1808; | |
132 | const Int_t kCable= 1808; | |
133 | ||
134 | accMax = 9.; // ANGLE POLAIRE MAXIMUM | |
135 | ||
136 | // DIPOLE MAGNET | |
137 | const Float_t kZDipole = 975; | |
138 | ||
139 | tpar[0] = 0.; | |
140 | tpar[1] = 360.; | |
141 | tpar[2] = 5.; | |
142 | // | |
143 | tpar[3] = -250.55+kZDipole; | |
144 | tpar[4] = 30.5; | |
145 | tpar[5] = 527.34; | |
146 | // | |
147 | tpar[6] = -160.7+kZDipole; | |
148 | tpar[7] = 30.5; | |
149 | tpar[8] = 527.34; | |
150 | // | |
151 | tpar[9] = 30.+kZDipole; | |
152 | tpar[10] = 30.5; | |
153 | tpar[11] = 527.34; | |
154 | ||
155 | tpar[12] = 150.8+kZDipole; | |
156 | tpar[13] = 193.3; | |
157 | tpar[14] = 527.34; | |
158 | // | |
159 | tpar[15] = 250.55+kZDipole; | |
160 | tpar[16] = 193.3; | |
161 | tpar[17] = 527.34; | |
162 | ||
163 | ||
164 | gMC->Gsvolu("DDIP", "PCON", idtmed[1814], tpar, 18); | |
165 | // COILS | |
166 | // air - m.f. | |
167 | cpar[0] = 207.; | |
168 | cpar[1] = 274.; | |
169 | cpar[2] = 37.65; | |
170 | cpar[3] = 119.; | |
171 | cpar[4] = 241.; | |
172 | // coil - high cuts | |
173 | gMC->Gsvolu("DC1 ", "TUBS", idtmed[kCoil+40], cpar, 5); | |
174 | cpar[3] = -61.; | |
175 | cpar[4] = 61.; | |
176 | gMC->Gsvolu("DC2 ", "TUBS", idtmed[kCoil+40], cpar, 5); | |
177 | ||
178 | // coil - low cuts cuts | |
179 | cpar[0] = 207.; | |
180 | // cpar[1] = cpar[0] + 10.; | |
181 | cpar[1] = 217; | |
182 | cpar[3] = 119.; | |
183 | cpar[4] = 241.; | |
184 | ||
185 | gMC->Gsvolu("DC3 ", "TUBS", idtmed[kCoil], cpar, 5); | |
186 | cpar[0] = 207.; | |
187 | cpar[1] = 217; | |
188 | cpar[3] = -61.; | |
189 | cpar[4] = 61.; | |
190 | gMC->Gsvolu("DC4 ", "TUBS", idtmed[kCoil], cpar, 5); | |
191 | ||
192 | gMC->Gspos("DC3 ", 1, "DC1 ", 0., 0., 0., 0, "ONLY"); | |
193 | gMC->Gspos("DC4 ", 1, "DC2 ", 0., 0., 0., 0, "ONLY"); | |
194 | ||
195 | // dz = 37.65 - 243.55 | |
196 | dz = -205.9-2.45; | |
197 | dx = 5.; | |
198 | gMC->Gspos("DC1 ", 1, "DDIP", dx, 0., dz+kZDipole, 0, "ONLY"); | |
199 | gMC->Gspos("DC1 ", 2, "DDIP", dx, 0., -dz+kZDipole, 0, "ONLY"); | |
200 | gMC->Gspos("DC2 ", 1, "DDIP", -dx, 0., dz+kZDipole, 0, "ONLY"); | |
201 | gMC->Gspos("DC2 ", 2, "DDIP", -dx, 0., -dz+kZDipole, 0, "ONLY"); | |
202 | the1 = 180.; | |
203 | phi1 = 0.; | |
204 | the2 = 90.; | |
205 | phi2 = 151.; | |
206 | the3 = 90.; | |
207 | phi3 = 61.; | |
208 | AliMatrix(idrotm[1800], the1, phi1, the2, phi2, the3, phi3); | |
209 | phi2 = 29.; //90-61 | |
210 | the3 = -90.; | |
211 | phi3 = -61.; | |
212 | AliMatrix(idrotm[1801], the1, phi1, the2, phi2, the3, phi3); | |
213 | the1 = 0.; | |
214 | phi1 = 0.; | |
215 | the2 = 90.; | |
216 | phi2 = 151.; | |
217 | the3 = 90.; | |
218 | phi3 = 61.; | |
219 | AliMatrix(idrotm[1802], the1, phi1, the2, phi2, the3, phi3); | |
220 | phi2 = 29.; | |
221 | the3 = -90.; | |
222 | phi3 = -61.; | |
223 | AliMatrix(idrotm[1803], the1, phi1, the2, phi2, the3, phi3); | |
224 | ||
225 | cpar[0] = 25.; | |
226 | cpar[1] = 100.3; //25+75.3 | |
227 | cpar[2] = 33.5; | |
228 | cpar[3] = 270.; | |
229 | cpar[4] = 360.; | |
230 | //* coil high cuts | |
231 | gMC->Gsvolu("DC11", "TUBS", idtmed[kCoil+40], cpar, 5); | |
232 | ||
233 | dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad); | |
234 | dy = TMath::Cos(30.5*kDegrad) * -(207.+33.5); | |
235 | dz = cpar[1] - 243.55-2.45; | |
236 | gMC->Gspos("DC11", 1, "DDIP", dx, dy, dz+kZDipole, idrotm[1800], "ONLY"); | |
237 | gMC->Gspos("DC11", 2, "DDIP", dx, dy, -dz+kZDipole, idrotm[1802], "ONLY"); | |
238 | gMC->Gspos("DC11", 3, "DDIP", -dx, dy, dz+kZDipole, idrotm[1801], "ONLY"); | |
239 | gMC->Gspos("DC11", 4, "DDIP", -dx, dy, -dz+kZDipole, idrotm[1803], "ONLY"); | |
240 | ||
241 | ||
242 | ||
243 | //* ... higher cuts | |
244 | cpar[0] = 25.; | |
245 | cpar[1] = 100.3; //25+75.3 | |
246 | cpar[2] = 33.5; | |
247 | cpar[3] = 0.; | |
248 | cpar[4] = 90.; | |
249 | //* coil high cuts | |
250 | gMC->Gsvolu("DC12", "TUBS", idtmed[kCoil+40], cpar, 5); | |
251 | ||
252 | dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad); | |
253 | dy = TMath::Cos(30.5*kDegrad) *(207.+33.5); | |
254 | dz = cpar[1] - 243.55-2.45; | |
255 | gMC->Gspos("DC12", 1, "DDIP", dx, dy, dz+kZDipole, idrotm[1801], "ONLY"); | |
256 | gMC->Gspos("DC12", 2, "DDIP", dx, dy, -dz+kZDipole, idrotm[1803], "ONLY"); | |
257 | gMC->Gspos("DC12", 3, "DDIP", -dx, dy, dz+kZDipole, idrotm[1800], "ONLY"); | |
258 | gMC->Gspos("DC12", 4, "DDIP", -dx, dy, -dz+kZDipole, idrotm[1802], "ONLY"); | |
259 | ||
260 | the1 = 90.; | |
261 | phi1 = 61.; | |
262 | the2 = 90.; | |
263 | phi2 = 151.; | |
264 | the3 = 0.; | |
265 | phi3 = 0.; | |
266 | AliMatrix(idrotm[1804], the1, phi1, the2, phi2, the3, phi3); | |
267 | the1 = 90.; | |
268 | phi1 = -61.; | |
269 | the2 = 90.; | |
270 | phi2 = -151.; | |
271 | AliMatrix(idrotm[1805], the1, phi1, the2, phi2, the3, phi3); | |
272 | the1 = 90.; | |
273 | phi1 = 119.; //180 -61 | |
274 | the2 = 90.; | |
275 | phi2 = 209.; //270-61 | |
276 | AliMatrix(idrotm[1806], the1, phi1, the2, phi2, the3, phi3); | |
277 | the1 = 90.; | |
278 | phi1 = -119.; | |
279 | the2 = 90.; | |
280 | phi2 = -209.; | |
281 | AliMatrix(idrotm[1807], the1, phi1, the2, phi2, the3, phi3); | |
282 | ||
283 | //* coil - high cuts | |
284 | ||
285 | tpar[0] = 37.65; | |
286 | tpar[1] = 33.5; | |
287 | tpar[2] = 145.5; | |
288 | gMC->Gsvolu("DL1 ", "BOX ", idtmed[kCoil+40], tpar, 3); | |
289 | ||
290 | // coil - low cuts | |
291 | ||
292 | tpar[0] = 5.; | |
293 | dx = 37.65 - 5.; | |
294 | gMC->Gsvolu("DL2 ", "BOX ", idtmed[kCoil], tpar, 3); | |
295 | gMC->Gspos("DL2 ", 1, "DL1 ", dx, 0., 0., 0, "ONLY"); | |
296 | ||
297 | dx =-53.62; | |
298 | dy =-241.26819; | |
299 | dz = 0.; | |
300 | gMC->Gspos("DL1 ", 1, "DDIP", dx, dy, dz+kZDipole, idrotm[1804], "ONLY"); | |
301 | gMC->Gspos("DL1 ", 2, "DDIP", dx, -dy, dz+kZDipole, idrotm[1805], "ONLY"); | |
302 | gMC->Gspos("DL1 ", 3, "DDIP",-dx, dy, dz+kZDipole, idrotm[1806], "ONLY"); | |
303 | gMC->Gspos("DL1 ", 4, "DDIP",-dx, -dy, dz+kZDipole, idrotm[1807], "ONLY"); | |
304 | ||
305 | // Contactor | |
306 | ||
307 | // high cuts | |
308 | ||
309 | //Steel outer face planes | |
310 | ||
311 | cpar[0] = 207.-18.6; | |
312 | cpar[1] = 274.+18.6; | |
313 | cpar[2] = 1.; | |
314 | cpar[3] = -50.; | |
315 | cpar[4] = 50.; | |
316 | ||
317 | gMC->Gsvolu("DCO1", "TUBS", idtmed[1818], cpar, 5); | |
318 | dx = -5.; | |
319 | dz = 168.25-1.5-1.; | |
320 | gMC->Gspos("DCO1", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
321 | dz = 243.55+4.5+1.5+1.; | |
322 | gMC->Gspos("DCO1", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
323 | ||
324 | // 9.06.2000 | |
325 | ||
326 | // cpar[0] = 207.-18.6; | |
327 | // cpar[1] = 274.+18.6; | |
328 | // cpar[2] = 1.; | |
329 | cpar[3] = 180.-50.; | |
330 | cpar[4] = 180.+50.; | |
331 | ||
332 | gMC->Gsvolu("DCO2", "TUBS", idtmed[1818], cpar, 5); | |
333 | dx = +5.; | |
334 | dz = 168.25-1.5-1.; | |
335 | gMC->Gspos("DCO2", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
336 | dz = 243.55+4.5+1.5+1.; | |
337 | gMC->Gspos("DCO2", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
338 | ||
339 | ||
340 | ||
341 | // Resin face planes | |
342 | ||
343 | cpar[0] = 207.; | |
344 | cpar[1] = 274.; | |
345 | cpar[2] = .75; | |
346 | cpar[3] = -50.; | |
347 | cpar[4] = 50.; | |
348 | ||
349 | gMC->Gsvolu("DCO3", "TUBS", idtmed[1812], cpar, 5); | |
350 | dx = -5; | |
351 | dz = 168.25-0.75; | |
352 | gMC->Gspos("DCO3", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
353 | dz = 243.55+4.5+0.75; | |
354 | gMC->Gspos("DCO3", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
355 | ||
356 | // 9.06.2000 | |
357 | ||
358 | cpar[3] = 180.-50.; | |
359 | cpar[4] = 180.+50.; | |
360 | gMC->Gsvolu("DCO4", "TUBS", idtmed[1812], cpar, 5); | |
361 | dx = +5; | |
362 | dz = 168.25-0.75; | |
363 | gMC->Gspos("DCO4", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
364 | dz = 243.55+4.5+0.75 ; | |
365 | gMC->Gspos("DCO4", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
366 | ||
367 | ||
368 | // G10 face plane | |
369 | ||
370 | cpar[0] = 207.; | |
371 | cpar[1] = 274.; | |
372 | cpar[2] = 2.25; | |
373 | cpar[3] = -50.; | |
374 | cpar[4] = 50.; | |
375 | ||
376 | gMC->Gsvolu("DCO5", "TUBS", idtmed[1810], cpar, 5); | |
377 | ||
378 | dx = -5; | |
379 | dz = 243.55+2.25; | |
380 | gMC->Gspos("DCO5", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
381 | ||
382 | // 9.06.2000 | |
383 | ||
384 | cpar[3] = 180.-50.; | |
385 | cpar[4] = 180.+50.; | |
386 | ||
387 | gMC->Gsvolu("DCO6", "TUBS", idtmed[1810], cpar, 5); | |
388 | ||
389 | dx = +5; | |
390 | dz = 243.55+2.25; | |
391 | gMC->Gspos("DCO6", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
392 | ||
393 | //Steel supported planes | |
394 | ||
395 | cpar[0] = 274.+1.5+2.; | |
396 | cpar[1] = 274.+18.6; | |
397 | cpar[2] = 1.; | |
398 | cpar[3] = -50.; | |
399 | cpar[4] = 50.; | |
400 | ||
401 | gMC->Gsvolu("DCO7", "TUBS", idtmed[1818], cpar, 5); | |
402 | ||
403 | dx = -5; | |
404 | dz = 168.25+1.; | |
405 | gMC->Gspos("DCO7", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
406 | ||
407 | // 9.06.2000 | |
408 | cpar[0] = 274.+1.5+2.; | |
409 | cpar[1] = 274.+18.6; | |
410 | cpar[2] = 1.; | |
411 | cpar[3] = 180.-50.; | |
412 | cpar[4] = 180.+50.; | |
413 | ||
414 | ||
415 | gMC->Gsvolu("DCO8", "TUBS", idtmed[1818], cpar, 5); | |
416 | ||
417 | dx = +5; | |
418 | dz = 168.25+1.; | |
419 | gMC->Gspos("DCO8", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
420 | ||
421 | // | |
422 | ||
423 | cpar[0] = 207.- 18.6; | |
424 | cpar[1] = 207.- 2.- 1.5; | |
425 | cpar[2] = 1.; | |
426 | cpar[3] = -50.; | |
427 | cpar[4] = 50.; | |
428 | ||
429 | gMC->Gsvolu("DCO9", "TUBS", idtmed[1818], cpar, 5); | |
430 | ||
431 | dx = -5; | |
432 | dz = 168.25+1.; | |
433 | gMC->Gspos("DCO9", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
434 | ||
435 | // 9.06.2000 | |
436 | ||
437 | cpar[0] = 207.- 18.6; | |
438 | cpar[1] = 207.- 2.- 1.5; | |
439 | cpar[2] = 1.; | |
440 | cpar[3] = 180.-50.; | |
441 | cpar[4] = 180.+50.; | |
442 | ||
443 | gMC->Gsvolu("DCOA", "TUBS", idtmed[1818], cpar, 5); | |
444 | ||
445 | dx = +5; | |
446 | dz = 168.25+1.; | |
447 | gMC->Gspos("DCOA", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
448 | ||
449 | ||
450 | // Sides steel planes | |
451 | ||
452 | cpar[0] = 207. - 1.5 -2.; | |
453 | cpar[1] = 207. - 1.5; | |
454 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; | |
455 | cpar[3] = -50.; | |
456 | cpar[4] = 50.; | |
457 | ||
458 | gMC->Gsvolu("DCOB", "TUBS", idtmed[1818], cpar, 5); | |
459 | ||
460 | cpar[0] = 274. + 1.5; | |
461 | cpar[1] = 274. + 1.5 +2.; | |
462 | ||
463 | gMC->Gsvolu("DCOC", "TUBS", idtmed[1818], cpar, 5); | |
464 | ||
465 | dx=-5.; | |
466 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
467 | gMC->Gspos("DCOB", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
468 | gMC->Gspos("DCOC", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
469 | ||
470 | // 9.06.2000 | |
471 | ||
472 | cpar[0] = 207. - 1.5 -2.; | |
473 | cpar[1] = 207. - 1.5; | |
474 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; | |
475 | cpar[3] = 180.-50.; | |
476 | cpar[4] = 180.+50.; | |
477 | ||
478 | gMC->Gsvolu("DCOD", "TUBS", idtmed[1818], cpar, 5); | |
479 | ||
480 | cpar[0] = 274. + 1.5; | |
481 | cpar[1] = 274. + 1.5 +2.; | |
482 | ||
483 | gMC->Gsvolu("DCOE", "TUBS", idtmed[1818], cpar, 5); | |
484 | ||
485 | dx=+5.; | |
486 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
487 | gMC->Gspos("DCOD", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
488 | gMC->Gspos("DCOE", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
489 | ||
490 | ||
491 | // Top and bottom resin planes | |
492 | ||
493 | cpar[0] = 207. - 1.5; | |
494 | cpar[1] = 207.; | |
495 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; | |
496 | cpar[3] = -50.; | |
497 | cpar[4] = 50.; | |
498 | ||
499 | gMC->Gsvolu("DCOF", "TUBS", idtmed[1812], cpar, 5); | |
500 | ||
501 | cpar[0] = 274.; | |
502 | cpar[1] = 274. + 1.5; | |
503 | ||
504 | gMC->Gsvolu("DCOG", "TUBS", idtmed[1812], cpar, 5); | |
505 | ||
506 | ||
507 | dx=-5.; | |
508 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
509 | gMC->Gspos("DCOF", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
510 | gMC->Gspos("DCOG", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
511 | ||
512 | // 9.06.2000 | |
513 | cpar[0] = 207. - 1.5; | |
514 | cpar[1] = 207.; | |
515 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; | |
516 | ||
517 | cpar[3] = 180.-50.; | |
518 | cpar[4] = 180.+50.; | |
519 | ||
520 | gMC->Gsvolu("DCOH", "TUBS", idtmed[1812], cpar, 5); | |
521 | ||
522 | cpar[0] = 274.; | |
523 | cpar[1] = 274. + 1.5; | |
524 | ||
525 | gMC->Gsvolu("DCOI", "TUBS", idtmed[1812], cpar, 5); | |
526 | ||
527 | ||
528 | dx=+5.; | |
529 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
530 | gMC->Gspos("DCOH", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
531 | gMC->Gspos("DCOI", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
532 | ||
533 | ||
534 | // Aluminum cabels | |
535 | ||
536 | cpar[0] = 274. + 1.5 +2.; | |
537 | cpar[1] = 274. + 1.5 +2. + 80.; | |
538 | cpar[2] = 5.05/2; | |
539 | cpar[3] = -24.; | |
540 | cpar[4] = 24.; | |
541 | ||
542 | gMC->Gsvolu("DCOJ", "TUBS", idtmed[kCable], cpar, 5); | |
543 | ||
544 | // dx = 274. + 1.5 +2. +40.; | |
545 | // dx = 5. + 1.5 +2. +40.; | |
546 | // dx = 5. + 1.5 +2.; | |
547 | dx=-5.; | |
548 | dz = 168.25 + 5.05 + 5.05/2; | |
549 | gMC->Gspos("DCOJ", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
550 | ||
551 | dz = 243.55 - 5.05/2; | |
552 | gMC->Gspos("DCOJ", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
553 | ||
554 | // 9.06.2000 | |
555 | ||
556 | cpar[3] = 180.-24.; | |
557 | cpar[4] = 180.+24.; | |
558 | ||
559 | gMC->Gsvolu("DCOK", "TUBS", idtmed[kCable], cpar, 5); | |
560 | ||
561 | // dx = 274. + 1.5 +2. +40.; | |
562 | // dx = 5. + 1.5 +2. +40.; | |
563 | // dx = 5. + 1.5 +2.; | |
564 | dx=+5.; | |
565 | dz = 168.25 + 5.05 + 5.05/2; | |
566 | gMC->Gspos("DCOK", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
567 | ||
568 | dz = 243.55 - 5.05/2; | |
569 | gMC->Gspos("DCOK", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
570 | ||
571 | ||
572 | // YOKE | |
573 | ||
574 | // Top and bottom blocks | |
575 | ypar[0] = 298.1; | |
576 | ypar[1] = 69.5; | |
577 | ypar[2] = 155.75; | |
578 | ||
579 | // iron- high cuts | |
580 | gMC->Gsvolu("DY1 ", "BOX ", idtmed[1858], ypar, 3); | |
581 | ypar[0] = 144.+10.; | |
582 | ypar[1] = 193.3+10.; | |
583 | ypar[2] = 5.; | |
584 | ypar[3] = 155.75; | |
585 | dy = -69.5 + 5.; | |
586 | // iron- low cuts | |
587 | gMC->Gsvolu("DY11", "TRD1", idtmed[1818], ypar, 4); | |
588 | gMC->Gspos("DY11", 1, "DY1 ", 0., dy, 0., 0, "ONLY"); | |
589 | ||
590 | dy = 365.5; | |
591 | dz = 4.95; | |
592 | gMC->Gspos("DY1 ", 1, "DDIP", 0., dy, -dz+kZDipole, 0, "ONLY"); | |
593 | ||
594 | the1 = 270.; | |
595 | phi1 = 0.; | |
596 | the2 = 270.; | |
597 | phi2 = 90.; | |
598 | the3 = 0.; | |
599 | phi3 = 0.; | |
600 | AliMatrix(idrotm[1808], the1, phi1, the2, phi2, the3, phi3); | |
601 | gMC->Gspos("DY1 ", 2, "DDIP", 0., -dy, -dz+kZDipole, idrotm[1808] , "ONLY"); | |
602 | ||
603 | // side walls | |
604 | // ypar[0] = 579./2.; | |
605 | ypar[0] = 296.; | |
606 | ypar[1] = 0.; | |
607 | ypar[2] = 0.; | |
608 | ypar[3] = 155.75; | |
609 | ypar[4] = 47.9; | |
610 | ypar[5] = 72.55; | |
611 | ypar[6] = 4.3058039629; | |
612 | // z+ | |
613 | ypar[7] = 155.75; | |
614 | ypar[8] = 47.9; | |
615 | ypar[9] = 72.55; | |
616 | ypar[10] = 4.3058039629; | |
617 | ||
618 | // iron - high cuts | |
619 | ||
620 | gMC->Gsvolu("DY2 ", "TRAP", idtmed[1858], ypar,11); | |
621 | ||
622 | ypar[4] = 47.9 -5.; | |
623 | ypar[5] = 72.55 -5.; | |
624 | ||
625 | ypar[8] = 47.9 -5.; | |
626 | ypar[9] = 72.55 -5.; | |
627 | ||
628 | ||
629 | // iron - low cuts | |
630 | ||
631 | gMC->Gsvolu("DY22", "TRAP", idtmed[1818], ypar,11); | |
632 | ||
633 | dy = 0.; | |
634 | dx = -5.; | |
635 | ||
636 | gMC->Gspos("DY22", 1, "DY2 ", dx, dy, 0., 0, "ONLY"); | |
637 | ||
638 | the1 = 90.; | |
639 | phi1 = 180.; | |
640 | the2 = 180.; | |
641 | phi2 = 180.; | |
642 | the3 = 90.; | |
643 | phi3 = 90.; | |
644 | AliMatrix(idrotm[1809], the1, phi1, the2, phi2, the3, phi3); | |
645 | ||
646 | the1 = 90.; | |
647 | phi1 = 0.; | |
648 | the2 = 180.; | |
649 | phi2 = 0.; | |
650 | the3 = 90.; | |
651 | phi3 = 90.; | |
652 | AliMatrix(idrotm[1810], the1, phi1, the2, phi2, the3, phi3); | |
653 | ||
654 | dx = 228.875; | |
655 | dz = - 4.95; | |
656 | ||
657 | gMC->Gspos("DY2 ", 1, "DDIP", dx, 0.0, dz+kZDipole, idrotm[1809], "ONLY"); | |
658 | gMC->Gspos("DY2 ", 2, "DDIP", -dx, 0.0, dz+kZDipole, idrotm[1810], "ONLY"); | |
659 | ||
660 | gMC->Gspos("DDIP", 1, "ALIC", 0., 0., 0., 0, "ONLY"); | |
661 | ||
662 | gMC->Gsatt("DDIP", "SEEN", 0); | |
663 | // gMC->Gsatt("DC21", "SEEN", 0); | |
664 | // gMC->Gsatt("DC22", "SEEN", 0); | |
665 | // gMC->Gsatt("DC3 ", "SEEN", 0); | |
666 | // gMC->Gsatt("DC4 ", "SEEN", 0); | |
667 | } | |
668 | ||
669 | ||
670 | void AliDIPOv2::CreateCompensatorDipole() | |
671 | { | |
672 | // | |
673 | // Geometry of the compensator Dipole MBWMD (was MCB @ SPS) | |
674 | // | |
675 | Int_t *idtmed = fIdtmed->GetArray()-1799; | |
676 | Int_t idrotm[1899]; | |
677 | // | |
678 | Float_t pbox[3] = {62.5, 62.5, 170.}; | |
679 | ||
680 | // Mother volumes | |
681 | gMC->Gsvolu("DCM0", "BOX", idtmed[1814], pbox, 3); | |
682 | ||
683 | // | |
684 | // Mother volume containing lower coil | |
685 | pbox[0] = 58.5/2.; | |
686 | pbox[1] = 30.0; | |
687 | pbox[2] = 152.5; | |
688 | ||
689 | gMC->Gsvolu("DCML", "BOX", idtmed[1809], pbox, 3); | |
690 | // | |
691 | // Base | |
692 | pbox[0] = 62.5; | |
693 | pbox[1] = 15.0; | |
694 | gMC->Gsvolu("DCBA", "BOX", idtmed[1809], pbox, 3); | |
695 | // | |
696 | // Coil: straight sections, horizontal | |
697 | pbox[0] = 6.; | |
698 | pbox[1] = 11.; | |
699 | pbox[2] = 135.; | |
700 | gMC->Gsvolu("DCH1", "BOX", idtmed[1816], pbox, 3); | |
701 | // | |
702 | // Coil: straight sections, horizontal | |
703 | pbox[0] = 6.; | |
704 | pbox[1] = 11.; | |
705 | pbox[2] = 135.; | |
706 | gMC->Gsvolu("DCH2", "BOX", idtmed[1816], pbox, 3); | |
707 | ||
708 | // | |
709 | // Mother volume containing upper coil | |
710 | pbox[0] = 8.0; | |
711 | pbox[1] = 17.5; | |
712 | pbox[2] = 135.0; | |
713 | gMC->Gsvolu("DCMU", "BOX", idtmed[1809], pbox, 3); | |
714 | ||
715 | // | |
716 | // Coil: straight sections, vertical | |
717 | pbox[0] = 6.0; | |
718 | pbox[1] = 9.5; | |
719 | pbox[2] = 11.0; | |
720 | ||
721 | gMC->Gsvolu("DCCV", "BOX", idtmed[1816], pbox, 3); | |
722 | // | |
723 | // Coil: circular section | |
724 | ||
725 | Float_t ptubs[5]; | |
726 | ptubs[0] = 0.; | |
727 | ptubs[1] = 35.; | |
728 | ptubs[2] = 8.; | |
729 | ptubs[3] = 0.; | |
730 | ptubs[4] = 90.; | |
731 | // gMC->Gsvolu("DCC1", "TUBS", idtmed[1809], ptubs, 5); | |
732 | ptubs[0] = 13.; | |
733 | ptubs[1] = 35.; | |
734 | ptubs[2] = 6.; | |
735 | ptubs[3] = 0.; | |
736 | ptubs[4] = 90.; | |
737 | gMC->Gsvolu("DCC1", "TUBS", idtmed[1816], ptubs, 5); | |
738 | // | |
739 | // Clamps | |
740 | Float_t ppgon[10]; | |
741 | ppgon[0] = 0.; | |
742 | ppgon[1] = 90.; | |
743 | ppgon[2] = 1.; | |
744 | ppgon[3] = 2.; | |
745 | ppgon[4] = -1.; | |
746 | ppgon[5] = 0.; | |
747 | ppgon[6] = 24.75; | |
748 | ppgon[7] = 1.; | |
749 | ppgon[8] = 0.; | |
750 | ppgon[9] = 24.75; | |
751 | gMC->Gsvolu("DCLA", "PGON", idtmed[1809], ppgon, 10); | |
752 | // | |
753 | // Assemble all | |
754 | // | |
755 | AliMatrix(idrotm[1811], -90., 0., 90., 90., 0., 0.); | |
756 | AliMatrix(idrotm[1812], 0., 0., 90., 90., 90., 0.); | |
757 | AliMatrix(idrotm[1813], 180., 0., 90., 90., 90., 0.); | |
758 | AliMatrix(idrotm[1814], 0., 180., 90., 270., 90., 0.); | |
759 | AliMatrix(idrotm[1815], 180., 180., 90., 270., 90., 0.); | |
760 | ||
761 | gMC->Gspos("DCH1", 1, "DCML", 23.25, -13., -17.5, 0, "ONLY"); | |
762 | gMC->Gspos("DCCV", 1, "DCM0", 12., 19., -159., 0, "ONLY"); | |
763 | gMC->Gspos("DCCV", 2, "DCM0", -12., 19., -159., 0, "ONLY"); | |
764 | gMC->Gspos("DCCV", 3, "DCML", 23.25, 20.5, 141.5, 0, "ONLY"); | |
765 | ||
766 | gMC->Gspos("DCML", 1, "DCM0", -33.25, -2.5, 17.5, 0, "ONLY"); | |
767 | gMC->Gspos("DCML", 2, "DCM0", 33.25, -2.5, 17.5, idrotm[1811], "ONLY"); | |
768 | ||
769 | ||
770 | gMC->Gspos("DCH2", 1, "DCMU", 2., 6.5, 0., 0, "ONLY"); | |
771 | gMC->Gspos("DCMU", 1, "DCM0", -12., 45., 0., 0, "ONLY"); | |
772 | gMC->Gspos("DCMU", 2, "DCM0", 12., 45., 0., idrotm[1811], "ONLY"); | |
773 | ||
774 | // gMC->Gspos("DCC2", 1, "DCC1", 0., 0., 0., 0, "ONLY"); | |
775 | ||
776 | gMC->Gspos("DCC1", 1, "DCM0", -12., 27.5, 135., idrotm[1812], "ONLY"); | |
777 | gMC->Gspos("DCC1", 2, "DCM0", 12., 27.5, 135., idrotm[1812], "ONLY"); | |
778 | gMC->Gspos("DCC1", 3, "DCM0", -12., 27.5, -135., idrotm[1813], "ONLY"); | |
779 | gMC->Gspos("DCC1", 4, "DCM0", 12., 27.5, -135., idrotm[1813], "ONLY"); | |
780 | ||
781 | gMC->Gspos("DCC1", 5, "DCM0", 12., 27.5-32.+13., -135., idrotm[1815], "ONLY"); | |
782 | gMC->Gspos("DCC1", 6, "DCM0", -12., 27.5-32.+13., -135., idrotm[1815], "ONLY"); | |
783 | ||
784 | gMC->Gspos("DCC1", 7, "DCML", 23.25, -13+13.+11., 117.5, idrotm[1814], "ONLY"); | |
785 | ||
786 | gMC->Gspos("DCLA", 1, "DCM0", 20., 27.5, -134., 0, "ONLY"); | |
787 | gMC->Gspos("DCLA", 2, "DCM0", 20., 27.5, -44., 0, "ONLY"); | |
788 | gMC->Gspos("DCLA", 3, "DCM0", 20., 27.5, 46., 0, "ONLY"); | |
789 | gMC->Gspos("DCLA", 4, "DCM0", 20., 27.5, 134., 0, "ONLY"); | |
790 | ||
791 | gMC->Gspos("DCLA", 5, "DCM0", -20., 27.5, -134., idrotm[1811], "ONLY"); | |
792 | gMC->Gspos("DCLA", 6, "DCM0", -20., 27.5, -44., idrotm[1811], "ONLY"); | |
793 | gMC->Gspos("DCLA", 7, "DCM0", -20., 27.5, 46., idrotm[1811], "ONLY"); | |
794 | gMC->Gspos("DCLA", 8, "DCM0", -20., 27.5, 134., idrotm[1811], "ONLY"); | |
795 | ||
796 | ||
797 | gMC->Gspos("DCBA", 1, "DCM0", 0., -47.5 , 17.5, 0, "ONLY"); | |
798 | gMC->Gspos("DCM0", 1, "ALIC", 0., -6.75, -975., 0, "ONLY"); | |
799 | ||
800 | ||
801 | } | |
802 | ||
803 | //_____________________________________________________________________________ | |
804 | void AliDIPOv2::DrawModule() | |
805 | { | |
806 | // | |
807 | // Draw a shaded view of the muon absorber | |
808 | // | |
809 | ||
810 | AliMC* gMC = AliMC::GetMC(); | |
811 | ||
812 | // Set everything unseen | |
813 | gMC->Gsatt("*", "seen", -1); | |
814 | // | |
815 | // Set ALIC mother transparent | |
816 | gMC->Gsatt("ALIC","SEEN",0); | |
817 | // | |
818 | // Set the volumes visible | |
819 | gMC->Gsatt("DDIP","seen",0); | |
820 | gMC->Gsatt("DC1 ","seen",1); | |
821 | gMC->Gsatt("DC2 ","seen",1); | |
822 | gMC->Gsatt("DC3 ","seen",1); | |
823 | gMC->Gsatt("DC4 ","seen",1); | |
824 | gMC->Gsatt("DC11","seen",1); | |
825 | gMC->Gsatt("DC21","seen",1); | |
826 | gMC->Gsatt("DC12","seen",1); | |
827 | gMC->Gsatt("DC22","seen",1); | |
828 | gMC->Gsatt("DL1 ","seen",1); | |
829 | gMC->Gsatt("DL2 ","seen",1); | |
830 | gMC->Gsatt("DY1 ","seen",1); | |
831 | gMC->Gsatt("DY2 ","seen",1); | |
832 | gMC->Gsatt("DYL ","seen",1); | |
833 | gMC->Gsatt("DY3 ","seen",1); | |
834 | // gMC->Gsatt("DY4 ","seen",1); | |
835 | // gMC->Gsatt("DY5 ","seen",1); | |
836 | // gMC->Gsatt("DY6 ","seen",1); | |
837 | // gMC->Gsatt("DY7 ","seen",1); | |
838 | // | |
839 | gMC->Gdopt("hide", "on"); | |
840 | gMC->Gdopt("shad", "on"); | |
841 | gMC->Gsatt("*", "fill", 7); | |
842 | gMC->SetClipBox("."); | |
843 | gMC->SetClipBox("."); | |
844 | gMC->DefaultRange(); | |
845 | gMC->Gdraw("alic", 30, 30, 0, 17, 13.5, .019, .019); | |
846 | gMC->Gdhead(1111, "Magnetic Dipole Version 2"); | |
847 | gMC->Gdman(16, 4, "MAN"); | |
848 | } | |
849 | ||
850 | ||
851 | ||
852 | ||
853 | //_____________________________________________________________________________ | |
854 | void AliDIPOv2::CreateMaterials() | |
855 | { | |
856 | // | |
857 | // Create Materials for Magnetic Dipole version 2 | |
858 | // | |
859 | ||
860 | Int_t isxfld = gAlice->Field()->Integ(); | |
861 | Float_t sxmgmx = gAlice->Field()->Max(); | |
862 | ||
863 | Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 }; | |
864 | Float_t zsteel[4] = { 26.,24.,28.,14. }; | |
865 | Float_t wsteel[4] = { .715,.18,.1,.005 }; | |
866 | ||
867 | Float_t acoil[3] = { 26.98,1.01,16. }; | |
868 | Float_t zcoil[3] = { 13.,1.,8. }; | |
869 | Float_t wcoil[3] = { .66,.226,.114 }; | |
870 | ||
871 | Float_t aresi[3] = { 1.01,12.011,16.}; | |
872 | Float_t zresi[3] = { 1.,6.,8. }; | |
873 | Float_t wresi[3] = { .0644,.7655,.1701 }; | |
874 | ||
875 | Float_t aG10[5] = { 1.01,12.011,16.,28.085 ,79.904 }; | |
876 | Float_t zG10[5] = { 1.,6.,8.,14.,35. }; | |
877 | Float_t wG10[5] = { .02089,.22338,.28493,.41342,.05738 }; | |
878 | ||
879 | Float_t aAlCon[2] = { 14.61, 26.98}; | |
880 | Float_t zAlCon[2] = { 7.3, 13.}; | |
881 | Float_t wAlCon[2] = { .0004,.9996}; | |
882 | ||
883 | ||
884 | Float_t epsil, stmin, deemax, tmaxfd, stemax; | |
885 | ||
886 | // --- Define the various materials for GEANT --- | |
887 | // Aluminum | |
888 | AliMaterial( 9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); | |
889 | AliMaterial(29, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); | |
890 | AliMaterial(49, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); | |
891 | ||
892 | // Iron | |
893 | AliMaterial(10, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); | |
894 | AliMaterial(30, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); | |
895 | AliMaterial(50, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); | |
896 | // Copper | |
897 | AliMaterial(17, "COPPER$ ", 63.55, 29., 8.96, 1.43, 15.1); | |
898 | AliMaterial(37, "COPPER$ ", 63.55, 29., 8.96, 1.43, 15.1); | |
899 | AliMaterial(57, "COPPER$ ", 63.55, 29., 8.96, 1.43, 15.1); | |
900 | // Air | |
901 | AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); | |
902 | AliMaterial(35, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); | |
903 | AliMaterial(55, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); | |
904 | ||
905 | // Vacuum | |
906 | AliMaterial(16, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
907 | AliMaterial(36, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
908 | AliMaterial(56, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
909 | ||
910 | // stainless Steel | |
911 | AliMixture(19, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
912 | AliMixture(39, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
913 | AliMixture(59, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
914 | ||
915 | // Coil | |
916 | AliMixture(14, "Al$", acoil, zcoil, 2.122, 3, wcoil); | |
917 | AliMixture(34, "Al$", acoil, zcoil, 2.122, 3, wcoil); | |
918 | AliMixture(54, "Al$", acoil, zcoil, 2.122, 3, wcoil); | |
919 | ||
920 | //RESIN | |
921 | AliMixture(13, "RESIN$", aresi, zresi, 1.05, 3, wresi); | |
922 | AliMixture(33, "RESIN$", aresi, zresi, 1.05, 3, wresi); | |
923 | AliMixture(53, "RESIN$", aresi, zresi, 1.05, 3, wresi); | |
924 | ||
925 | //G10 | |
926 | AliMixture(11, "G10$", aG10, zG10, 1.7, 5, wG10); | |
927 | AliMixture(31, "G10$", aG10, zG10, 1.7, 5, wG10); | |
928 | AliMixture(51, "G10$", aG10, zG10, 1.7, 5, wG10); | |
929 | ||
930 | //Aluminium Conductor | |
931 | AliMixture(12, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); | |
932 | AliMixture(32, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); | |
933 | AliMixture(52, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); | |
934 | ||
935 | // **************** | |
936 | // Defines tracking media parameters. | |
937 | // Les valeurs sont commentees pour laisser le defaut | |
938 | // a GEANT (version 3-21, page CONS200), f.m. | |
939 | epsil = .001; // Tracking precision, | |
940 | stemax = -1.; // Maximum displacement for multiple scat | |
941 | tmaxfd = -20.; // Maximum angle due to field deflection | |
942 | deemax = -.3; // Maximum fractional energy loss, DLS | |
943 | stmin = -.8; | |
944 | // *************** | |
945 | ||
946 | // Aluminum | |
947 | AliMedium(9, "ALU_C0 ", 9, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
948 | AliMedium(29, "ALU_C1 ", 29, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
949 | AliMedium(49, "ALU_C2 ", 49, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
950 | ||
951 | // Iron | |
952 | AliMedium(10, "FE_C0 ", 10, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
953 | AliMedium(30, "FE_C1 ", 30, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
954 | AliMedium(50, "FE_C2 ", 50, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
955 | ||
956 | // Air | |
957 | AliMedium(15, "AIR_C0 ", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
958 | AliMedium(35, "AIR_C1 ", 35, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
959 | AliMedium(55, "AIR_C2 ", 55, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
960 | ||
961 | // Vacuum | |
962 | AliMedium(16, "VA_C0 ", 16, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
963 | AliMedium(36, "VA_C1 ", 36, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
964 | AliMedium(56, "VA_C2 ", 56, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
965 | ||
966 | // Steel | |
967 | AliMedium(19, "ST_C0 ", 19, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
968 | AliMedium(39, "ST_C1 ", 39, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
969 | AliMedium(59, "ST_C3 ", 59, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
970 | ||
971 | // Coil | |
972 | AliMedium(14, "Coil_C1 ", 14, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
973 | AliMedium(34, "Coil_C2 ", 34, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
974 | AliMedium(54, "Coil_C3 ", 54, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
975 | ||
976 | // Resin | |
977 | AliMedium(13, "RESIN_C0 ", 13, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
978 | AliMedium(33, "RESIN_C1 ", 33, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
979 | AliMedium(53, "RESIN_C2 ", 53, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
980 | ||
981 | // G10 | |
982 | AliMedium(11, "G10_C0 ", 11, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
983 | AliMedium(31, "G10_C1 ", 31, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
984 | AliMedium(51, "G10_C2 ", 51, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
985 | ||
986 | //Aluminium Contactor | |
987 | AliMedium(12, "AlCond_C0 ", 12, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
988 | AliMedium(32, "AlCond_C1 ", 32, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
989 | AliMedium(52, "AlCond_C2 ", 52, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
990 | ||
991 | // | |
992 | // Copper | |
993 | AliMedium(17, "Cu_C0 ", 17, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
994 | AliMedium(37, "Cu_C1 ", 37, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
995 | AliMedium(57, "Cu_C2 ", 57, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
996 | ||
997 | } | |
998 | ||
999 | ||
1000 | ||
1001 | ||
1002 | ||
1003 |