[u/mrichter/AliRoot.git] / macros / Config.C

// One can use the configuration macro in compiled mode by
// root [0] gSystem->Load("libgeant321");
// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
//                   -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
// root [0] .x grun.C(1,"Config.C++")

#if !defined(__CINT__) || defined(__MAKECINT__)
#include <Riostream.h>
#include <TPDGCode.h>
#include <TRandom.h>
#include <TSystem.h>
#include <TVirtualMC.h>
#include <TGeant3TGeo.h>
#include "STEER/AliRunLoader.h"
#include "STEER/AliRun.h"
#include "STEER/AliConfig.h"
#include "PYTHIA6/AliDecayerPythia.h"
#include "EVGEN/AliGenCocktail.h"
#include "EVGEN/AliGenHIJINGpara.h"
#include "STEER/AliMagFMaps.h"
#include "STRUCT/AliBODY.h"
#include "STRUCT/AliMAG.h"
#include "STRUCT/AliABSOv3.h"
#include "STRUCT/AliDIPOv3.h"
#include "STRUCT/AliHALLv3.h"
#include "STRUCT/AliFRAMEv2.h"
#include "STRUCT/AliSHILv3.h"
#include "STRUCT/AliPIPEv3.h"
#include "ITS/AliITSv11Hybrid.h"
#include "TPC/AliTPCv2.h"
#include "TOF/AliTOFv6T0.h"
#include "HMPID/AliHMPIDv3.h"
#include "ZDC/AliZDCv3.h"
#include "TRD/AliTRDv1.h"
#include "FMD/AliFMDv1.h"
#include "MUON/AliMUONv1.h"
#include "PHOS/AliPHOSv1.h"
#include "PMD/AliPMDv1.h"
#include "T0/AliT0v1.h"
#include "EMCAL/AliEMCALv2.h"
#include "ACORDE/AliACORDEv0.h"
#include "VZERO/AliVZEROv7.h"
#endif

Float_t EtaToTheta(Float_t arg);
void    LoadPythia();


void Config()
{
    // ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
    // Theta range given through pseudorapidity limits 22/6/2001

    // Set Random Number seed
  //gRandom->SetSeed(123456); // Set 0 to use the current time
  
  AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);

  // Load Pythia libraries
  LoadPythia();
  // Libraries required by geant321
#if defined(__CINT__)
    gSystem->Load("libgeant321");
#endif

    new     TGeant3TGeo("C++ Interface to Geant3");

    AliRunLoader* rl=0x0;

    AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);

    rl = AliRunLoader::Open("galice.root",
			    AliConfig::GetDefaultEventFolderName(),
			    "recreate");
    if (rl == 0x0)
      {
	gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
	return;
      }
    rl->SetCompressionLevel(2);
    rl->SetNumberOfEventsPerFile(3);
    gAlice->SetRunLoader(rl);
    
    // gAlice->SetGeometryFromFile("geometry.root");

    // Uncomment if you want to load geometry from OCDB!   >>>>
/*    
    if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
	 cout << "#####################################################" << endl;
	 cout << "#                                                   #" << endl;
	 cout << "#     WARNING: CDB DEFAULT STORAGE NOT SET !!!      #" << endl;
	 cout << "#     SETTING IT TO local://$ALICE_ROOT !!!         #" << endl;
	 cout << "#                                                   #" << endl;
	 cout << "#####################################################" << endl;
          
         AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT");
    }
    
    if(AliCDBManager::Instance()->GetRun() < 0){
	 cout << "#####################################################" << endl;
	 cout << "#                                                   #" << endl;
	 cout << "#     WARNING: RUN NUMBER NOT SET !!!               #" << endl;
	 cout << "#     SETTING IT TO 0 !!!                           #" << endl;
	 cout << "#                                                   #" << endl;
	 cout << "#####################################################" << endl;
          
         AliCDBManager::Instance()->SetRun(0);
    }
    gAlice->SetGeometryFromCDB();
*/
    // Uncomment if you want to load geometry from OCDB!   <<<<

    // Set the trigger configuration
    gAlice->SetTriggerDescriptor("Pb-Pb");
    cout<<"Trigger configuration is set to  Pb-Pb"<<endl;

    //
    // Set External decayer
    TVirtualMCDecayer *decayer = new AliDecayerPythia();

    decayer->SetForceDecay(kAll);
    decayer->Init();
    gMC->SetExternalDecayer(decayer);
    //=======================================================================
    // ************* STEERING parameters FOR ALICE SIMULATION **************
    // --- Specify event type to be tracked through the ALICE setup
    // --- All positions are in cm, angles in degrees, and P and E in GeV


    gMC->SetProcess("DCAY",1);
    gMC->SetProcess("PAIR",1);
    gMC->SetProcess("COMP",1);
    gMC->SetProcess("PHOT",1);
    gMC->SetProcess("PFIS",0);
    gMC->SetProcess("DRAY",0);
    gMC->SetProcess("ANNI",1);
    gMC->SetProcess("BREM",1);
    gMC->SetProcess("MUNU",1);
    gMC->SetProcess("CKOV",1);
    gMC->SetProcess("HADR",1);
    gMC->SetProcess("LOSS",2);
    gMC->SetProcess("MULS",1);
    gMC->SetProcess("RAYL",1);

    Float_t cut = 1.e-3;        // 1MeV cut by default
    Float_t tofmax = 1.e10;

    gMC->SetCut("CUTGAM", cut);
    gMC->SetCut("CUTELE", cut);
    gMC->SetCut("CUTNEU", cut);
    gMC->SetCut("CUTHAD", cut);
    gMC->SetCut("CUTMUO", cut);
    gMC->SetCut("BCUTE",  cut); 
    gMC->SetCut("BCUTM",  cut); 
    gMC->SetCut("DCUTE",  cut); 
    gMC->SetCut("DCUTM",  cut); 
    gMC->SetCut("PPCUTM", cut);
    gMC->SetCut("TOFMAX", tofmax); 


    int     nParticles = 100;
    if (gSystem->Getenv("CONFIG_NPARTICLES"))
    {
        nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
    }

    AliGenCocktail *gener = new AliGenCocktail();
    gener->SetPhiRange(0, 360);
    // Set pseudorapidity range from -8 to 8.
    Float_t thmin = EtaToTheta(8);   // theta min. <---> eta max
    Float_t thmax = EtaToTheta(-8);  // theta max. <---> eta min 
    gener->SetThetaRange(thmin,thmax);
    gener->SetOrigin(0, 0, 0);  //vertex position
    gener->SetSigma(0, 0, 0);   //Sigma in (X,Y,Z) (cm) on IP position

    AliGenHIJINGpara *hijingparam = new AliGenHIJINGpara(nParticles);
    hijingparam->SetMomentumRange(0.2, 999);
    gener->AddGenerator(hijingparam,"HIJING PARAM",1);

//    AliGenBox *genbox = new AliGenBox(nParticles);
//    genbox->SetPart(kGamma);
//    genbox->SetPtRange(0.3, 10.00);
//    gener->AddGenerator(genbox,"GENBOX GAMMA for PHOS",1);
    gener->Init();


    // 
    // Activate this line if you want the vertex smearing to happen
    // track by track
    //
    //gener->SetVertexSmear(perTrack); 
    // Field (L3 0.4 T)
    AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., 1);
    gAlice->SetField(field);    


    Int_t   iABSO  =  1;
    Int_t   iDIPO  =  1;
    Int_t   iFMD   =  1;
    Int_t   iFRAME =  1;
    Int_t   iHALL  =  1;
    Int_t   iITS   =  1;
    Int_t   iMAG   =  1;
    Int_t   iMUON  =  1;
    Int_t   iPHOS  =  1;
    Int_t   iPIPE  =  1;
    Int_t   iPMD   =  1;
    Int_t   iHMPID  =  1;
    Int_t   iSHIL  =  1;
    Int_t   iT0 =  1;
    Int_t   iTOF   =  1;
    Int_t   iTPC   =  1;
    Int_t   iTRD   =  1;
    Int_t   iZDC   =  1;
    Int_t   iEMCAL =  1;
    Int_t   iACORDE   =  0;
    Int_t   iVZERO =  1;
    rl->CdGAFile();
    //=================== Alice BODY parameters =============================
    AliBODY *BODY = new AliBODY("BODY", "Alice envelop");

    if (iMAG)
    {
        //=================== MAG parameters ============================
        // --- Start with Magnet since detector layouts may be depending ---
        // --- on the selected Magnet dimensions ---
        AliMAG *MAG = new AliMAG("MAG", "Magnet");
    }


    if (iABSO)
    {
        //=================== ABSO parameters ============================
        AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
    }

    if (iDIPO)
    {
        //=================== DIPO parameters ============================

        AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
    }

    if (iHALL)
    {
        //=================== HALL parameters ============================

        AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
    }


    if (iFRAME)
    {
        //=================== FRAME parameters ============================

        AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
	FRAME->SetHoles(1);
    }

    if (iSHIL)
    {
        //=================== SHIL parameters ============================

        AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
    }


    if (iPIPE)
    {
        //=================== PIPE parameters ============================

        AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
    }
 
    if (iITS)
    {
        //=================== ITS parameters ============================

	AliITS *ITS  = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
    }

    if (iTPC)
    {
        //============================ TPC parameters ===================
        AliTPC *TPC = new AliTPCv2("TPC", "Default");
    }


    if (iTOF) {
        //=================== TOF parameters ============================
	AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
    }


    if (iHMPID)
    {
        //=================== HMPID parameters ===========================
        AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");

    }


    if (iZDC)
    {
        //=================== ZDC parameters ============================

        AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
    }

    if (iTRD)
    {
        //=================== TRD parameters ============================

        AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
    }

    if (iFMD)
    {
        //=================== FMD parameters ============================
	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
   }

    if (iMUON)
    {
        //=================== MUON parameters ===========================
        // New MUONv1 version (geometry defined via builders)
        AliMUON *MUON = new AliMUONv1("MUON", "default");
    }
    //=================== PHOS parameters ===========================

    if (iPHOS)
    {
        AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
    }


    if (iPMD)
    {
        //=================== PMD parameters ============================
        AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
    }

    if (iT0)
    {
        //=================== T0 parameters ============================
        AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
    }

    if (iEMCAL)
    {
        //=================== EMCAL parameters ============================
        AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
    }

     if (iACORDE)
    {
        //=================== ACORDE parameters ============================
        AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
    }

     if (iVZERO)
    {
        //=================== ACORDE parameters ============================
        AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
    }

     AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);

}

Float_t EtaToTheta(Float_t arg){
  return (180./TMath::Pi())*2.*atan(exp(-arg));
}


void LoadPythia()
{
    // Load Pythia related libraries
    gSystem->Load("liblhapdf.so");      // Parton density functions
    gSystem->Load("libEGPythia6.so");   // TGenerator interface
    gSystem->Load("libpythia6.so");     // Pythia
    gSystem->Load("libAliPythia6.so");  // ALICE specific implementations
}
Commit	Line	Data
	1	// One can use the configuration macro in compiled mode by
	2	// root [0] gSystem->Load("libgeant321");
	3	// root [0] gSystem->SetIncludePath("-I$ROOTSYS/include -I$ALICE_ROOT/include\
	4	// -I$ALICE_ROOT -I$ALICE/geant3/TGeant3");
	5	// root [0] .x grun.C(1,"Config.C++")
	6
	7	#if !defined(__CINT__) \|\| defined(__MAKECINT__)
	8	#include <Riostream.h>
	9	#include <TPDGCode.h>
	10	#include <TRandom.h>
	11	#include <TSystem.h>
	12	#include <TVirtualMC.h>
	13	#include <TGeant3TGeo.h>
	14	#include "STEER/AliRunLoader.h"
	15	#include "STEER/AliRun.h"
	16	#include "STEER/AliConfig.h"
	17	#include "PYTHIA6/AliDecayerPythia.h"
	18	#include "EVGEN/AliGenCocktail.h"
	19	#include "EVGEN/AliGenHIJINGpara.h"
	20	#include "STEER/AliMagFMaps.h"
	21	#include "STRUCT/AliBODY.h"
	22	#include "STRUCT/AliMAG.h"
	23	#include "STRUCT/AliABSOv3.h"
	24	#include "STRUCT/AliDIPOv3.h"
	25	#include "STRUCT/AliHALLv3.h"
	26	#include "STRUCT/AliFRAMEv2.h"
	27	#include "STRUCT/AliSHILv3.h"
	28	#include "STRUCT/AliPIPEv3.h"
	29	#include "ITS/AliITSv11Hybrid.h"
	30	#include "TPC/AliTPCv2.h"
	31	#include "TOF/AliTOFv6T0.h"
	32	#include "HMPID/AliHMPIDv3.h"
	33	#include "ZDC/AliZDCv3.h"
	34	#include "TRD/AliTRDv1.h"
	35	#include "FMD/AliFMDv1.h"
	36	#include "MUON/AliMUONv1.h"
	37	#include "PHOS/AliPHOSv1.h"
	38	#include "PMD/AliPMDv1.h"
	39	#include "T0/AliT0v1.h"
	40	#include "EMCAL/AliEMCALv2.h"
	41	#include "ACORDE/AliACORDEv0.h"
	42	#include "VZERO/AliVZEROv7.h"
	43	#endif
	44
	45	Float_t EtaToTheta(Float_t arg);
	46	void LoadPythia();
	47
	48
	49	void Config()
	50	{
	51	// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
	52	// Theta range given through pseudorapidity limits 22/6/2001
	53
	54	// Set Random Number seed
	55	//gRandom->SetSeed(123456); // Set 0 to use the current time
	56
	57	AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);
	58
	59	// Load Pythia libraries
	60	LoadPythia();
	61	// Libraries required by geant321
	62	#if defined(__CINT__)
	63	gSystem->Load("libgeant321");
	64	#endif
	65
	66	new TGeant3TGeo("C++ Interface to Geant3");
	67
	68	AliRunLoader* rl=0x0;
	69
	70	AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
	71
	72	rl = AliRunLoader::Open("galice.root",
	73	AliConfig::GetDefaultEventFolderName(),
	74	"recreate");
	75	if (rl == 0x0)
	76	{
	77	gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
	78	return;
	79	}
	80	rl->SetCompressionLevel(2);
	81	rl->SetNumberOfEventsPerFile(3);
	82	gAlice->SetRunLoader(rl);
	83
	84	// gAlice->SetGeometryFromFile("geometry.root");
	85
	86	// Uncomment if you want to load geometry from OCDB! >>>>
	87	/*
	88	if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
	89	cout << "#####################################################" << endl;
	90	cout << "# #" << endl;
	91	cout << "# WARNING: CDB DEFAULT STORAGE NOT SET !!! #" << endl;
	92	cout << "# SETTING IT TO local://$ALICE_ROOT !!! #" << endl;
	93	cout << "# #" << endl;
	94	cout << "#####################################################" << endl;
	95
	96	AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT");
	97	}
	98
	99	if(AliCDBManager::Instance()->GetRun() < 0){
	100	cout << "#####################################################" << endl;
	101	cout << "# #" << endl;
	102	cout << "# WARNING: RUN NUMBER NOT SET !!! #" << endl;
	103	cout << "# SETTING IT TO 0 !!! #" << endl;
	104	cout << "# #" << endl;
	105	cout << "#####################################################" << endl;
	106
	107	AliCDBManager::Instance()->SetRun(0);
	108	}
	109	gAlice->SetGeometryFromCDB();
	110	*/
	111	// Uncomment if you want to load geometry from OCDB! <<<<
	112
	113	// Set the trigger configuration
	114	gAlice->SetTriggerDescriptor("Pb-Pb");
	115	cout<<"Trigger configuration is set to Pb-Pb"<<endl;
	116
	117	//
	118	// Set External decayer
	119	TVirtualMCDecayer *decayer = new AliDecayerPythia();
	120
	121	decayer->SetForceDecay(kAll);
	122	decayer->Init();
	123	gMC->SetExternalDecayer(decayer);
	124	//=======================================================================
	125	// *********** STEERING parameters FOR ALICE SIMULATION ************
	126	// --- Specify event type to be tracked through the ALICE setup
	127	// --- All positions are in cm, angles in degrees, and P and E in GeV
	128
	129
	130	gMC->SetProcess("DCAY",1);
	131	gMC->SetProcess("PAIR",1);
	132	gMC->SetProcess("COMP",1);
	133	gMC->SetProcess("PHOT",1);
	134	gMC->SetProcess("PFIS",0);
	135	gMC->SetProcess("DRAY",0);
	136	gMC->SetProcess("ANNI",1);
	137	gMC->SetProcess("BREM",1);
	138	gMC->SetProcess("MUNU",1);
	139	gMC->SetProcess("CKOV",1);
	140	gMC->SetProcess("HADR",1);
	141	gMC->SetProcess("LOSS",2);
	142	gMC->SetProcess("MULS",1);
	143	gMC->SetProcess("RAYL",1);
	144
	145	Float_t cut = 1.e-3; // 1MeV cut by default
	146	Float_t tofmax = 1.e10;
	147
	148	gMC->SetCut("CUTGAM", cut);
	149	gMC->SetCut("CUTELE", cut);
	150	gMC->SetCut("CUTNEU", cut);
	151	gMC->SetCut("CUTHAD", cut);
	152	gMC->SetCut("CUTMUO", cut);
	153	gMC->SetCut("BCUTE", cut);
	154	gMC->SetCut("BCUTM", cut);
	155	gMC->SetCut("DCUTE", cut);
	156	gMC->SetCut("DCUTM", cut);
	157	gMC->SetCut("PPCUTM", cut);
	158	gMC->SetCut("TOFMAX", tofmax);
	159
	160
	161	int nParticles = 100;
	162	if (gSystem->Getenv("CONFIG_NPARTICLES"))
	163	{
	164	nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
	165	}
	166
	167	AliGenCocktail *gener = new AliGenCocktail();
	168	gener->SetPhiRange(0, 360);
	169	// Set pseudorapidity range from -8 to 8.
	170	Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
	171	Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
	172	gener->SetThetaRange(thmin,thmax);
	173	gener->SetOrigin(0, 0, 0); //vertex position
	174	gener->SetSigma(0, 0, 0); //Sigma in (X,Y,Z) (cm) on IP position
	175
	176	AliGenHIJINGpara *hijingparam = new AliGenHIJINGpara(nParticles);
	177	hijingparam->SetMomentumRange(0.2, 999);
	178	gener->AddGenerator(hijingparam,"HIJING PARAM",1);
	179
	180	// AliGenBox *genbox = new AliGenBox(nParticles);
	181	// genbox->SetPart(kGamma);
	182	// genbox->SetPtRange(0.3, 10.00);
	183	// gener->AddGenerator(genbox,"GENBOX GAMMA for PHOS",1);
	184	gener->Init();
	185
	186
	187	//
	188	// Activate this line if you want the vertex smearing to happen
	189	// track by track
	190	//
	191	//gener->SetVertexSmear(perTrack);
	192	// Field (L3 0.4 T)
	193	AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., 1);
	194	gAlice->SetField(field);
	195
	196
	197	Int_t iABSO = 1;
	198	Int_t iDIPO = 1;
	199	Int_t iFMD = 1;
	200	Int_t iFRAME = 1;
	201	Int_t iHALL = 1;
	202	Int_t iITS = 1;
	203	Int_t iMAG = 1;
	204	Int_t iMUON = 1;
	205	Int_t iPHOS = 1;
	206	Int_t iPIPE = 1;
	207	Int_t iPMD = 1;
	208	Int_t iHMPID = 1;
	209	Int_t iSHIL = 1;
	210	Int_t iT0 = 1;
	211	Int_t iTOF = 1;
	212	Int_t iTPC = 1;
	213	Int_t iTRD = 1;
	214	Int_t iZDC = 1;
	215	Int_t iEMCAL = 1;
	216	Int_t iACORDE = 0;
	217	Int_t iVZERO = 1;
	218	rl->CdGAFile();
	219	//=================== Alice BODY parameters =============================
	220	AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
	221
	222	if (iMAG)
	223	{
	224	//=================== MAG parameters ============================
	225	// --- Start with Magnet since detector layouts may be depending ---
	226	// --- on the selected Magnet dimensions ---
	227	AliMAG *MAG = new AliMAG("MAG", "Magnet");
	228	}
	229
	230
	231	if (iABSO)
	232	{
	233	//=================== ABSO parameters ============================
	234	AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
	235	}
	236
	237	if (iDIPO)
	238	{
	239	//=================== DIPO parameters ============================
	240
	241	AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
	242	}
	243
	244	if (iHALL)
	245	{
	246	//=================== HALL parameters ============================
	247
	248	AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
	249	}
	250
	251
	252	if (iFRAME)
	253	{
	254	//=================== FRAME parameters ============================
	255
	256	AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
	257	FRAME->SetHoles(1);
	258	}
	259
	260	if (iSHIL)
	261	{
	262	//=================== SHIL parameters ============================
	263
	264	AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
	265	}
	266
	267
	268	if (iPIPE)
	269	{
	270	//=================== PIPE parameters ============================
	271
	272	AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
	273	}
	274
	275	if (iITS)
	276	{
	277	//=================== ITS parameters ============================
	278
	279	AliITS *ITS = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
	280	}
	281
	282	if (iTPC)
	283	{
	284	//============================ TPC parameters ===================
	285	AliTPC *TPC = new AliTPCv2("TPC", "Default");
	286	}
	287
	288
	289	if (iTOF) {
	290	//=================== TOF parameters ============================
	291	AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
	292	}
	293
	294
	295	if (iHMPID)
	296	{
	297	//=================== HMPID parameters ===========================
	298	AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
	299
	300	}
	301
	302
	303	if (iZDC)
	304	{
	305	//=================== ZDC parameters ============================
	306
	307	AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
	308	}
	309
	310	if (iTRD)
	311	{
	312	//=================== TRD parameters ============================
	313
	314	AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
	315	}
	316
	317	if (iFMD)
	318	{
	319	//=================== FMD parameters ============================
	320	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
	321	}
	322
	323	if (iMUON)
	324	{
	325	//=================== MUON parameters ===========================
	326	// New MUONv1 version (geometry defined via builders)
	327	AliMUON *MUON = new AliMUONv1("MUON", "default");
	328	}
	329	//=================== PHOS parameters ===========================
	330
	331	if (iPHOS)
	332	{
	333	AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
	334	}
	335
	336
	337	if (iPMD)
	338	{
	339	//=================== PMD parameters ============================
	340	AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
	341	}
	342
	343	if (iT0)
	344	{
	345	//=================== T0 parameters ============================
	346	AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
	347	}
	348
	349	if (iEMCAL)
	350	{
	351	//=================== EMCAL parameters ============================
	352	AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
	353	}
	354
	355	if (iACORDE)
	356	{
	357	//=================== ACORDE parameters ============================
	358	AliACORDE *ACORDE = new AliACORDEv0("ACORDE", "normal ACORDE");
	359	}
	360
	361	if (iVZERO)
	362	{
	363	//=================== ACORDE parameters ============================
	364	AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
	365	}
	366
	367	AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
	368
	369	}
	370
	371	Float_t EtaToTheta(Float_t arg){
	372	return (180./TMath::Pi())2.atan(exp(-arg));
	373	}
	374
	375
	376	void LoadPythia()
	377	{
	378	// Load Pythia related libraries
	379	gSystem->Load("liblhapdf.so"); // Parton density functions
	380	gSystem->Load("libEGPythia6.so"); // TGenerator interface
	381	gSystem->Load("libpythia6.so"); // Pythia
	382	gSystem->Load("libAliPythia6.so"); // ALICE specific implementations
	383	}