1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
16 Based on the QA code for PHOS written by Yves Schutz July 2007
18 Authors: J.Klay (Cal Poly) May 2008
19 S. Salur LBL April 2008
21 Created one histogram for QA shifter;-- Yaxian Mao: 11/2009
22 The idea:average counts for all the towers should be flat
23 Change all existing histograms as experts
25 Change histograms for DQM shifter: -- Yaxian Mao 04/2010
26 Calcuate the amplitude ratio from current run and the LED reference, for QAChecker use
27 Also calculate the ratio of amplitude from LED Monitor system (current/Reference), to check LED system
31 // --- ROOT system ---
32 #include <TClonesArray.h>
40 #include <TProfile2D.h>
42 // --- Standard library ---
45 // --- AliRoot header files ---
47 #include "AliESDCaloCluster.h"
48 #include "AliESDCaloCells.h"
49 #include "AliESDEvent.h"
51 #include "AliEMCALQADataMakerRec.h"
52 #include "AliQAChecker.h"
53 #include "AliEMCALDigit.h"
54 #include "AliEMCALRecPoint.h"
55 #include "AliEMCALRawUtils.h"
56 #include "AliEMCALReconstructor.h"
57 #include "AliEMCALRecParam.h"
58 #include "AliRawReader.h"
59 #include "AliCaloRawStreamV3.h"
60 #include "AliEMCALGeoParams.h"
61 #include "AliRawEventHeaderBase.h"
62 #include "AliQAManager.h"
63 #include "AliCDBEntry.h"
65 #include "AliCaloBunchInfo.h"
66 #include "AliCaloFitResults.h"
67 #include "AliCaloRawAnalyzer.h"
68 #include "AliCaloRawAnalyzerFactory.h"
70 #include "AliEMCALGeometry.h"
71 #include "AliEMCALTriggerSTURawStream.h"
76 ClassImp(AliEMCALQADataMakerRec)
78 //____________________________________________________________________________
79 AliEMCALQADataMakerRec::AliEMCALQADataMakerRec(Int_t fitAlgo) :
80 AliQADataMakerRec(AliQAv1::GetDetName(AliQAv1::kEMCAL), "EMCAL Quality Assurance Data Maker"),
85 fSuperModules(20), // number of SuperModules; updated to 20 for EMCal + DCal
86 fFirstPedestalSample(0),
87 fLastPedestalSample(3),
88 fFirstPedestalSampleTRU(0),
89 fLastPedestalSampleTRU(3),
91 fMaxSignalLG(AliEMCALGeoParams::fgkSampleMax),
93 fMaxSignalHG(AliEMCALGeoParams::fgkSampleMax),
95 fMaxSignalTRU(AliEMCALGeoParams::fgkSampleMax),
96 fMinSignalLGLEDMon(0),
97 fMaxSignalLGLEDMon(AliEMCALGeoParams::fgkSampleMax),
98 fMinSignalHGLEDMon(0),
99 fMaxSignalHGLEDMon(AliEMCALGeoParams::fgkSampleMax),
100 fCalibRefHistoPro(NULL),
101 fCalibRefHistoH2F(NULL),
102 fLEDMonRefHistoPro(NULL),
103 fHighEmcHistoH2F(NULL)
104 // fTextSM(new TText*[fSuperModules]) ,
110 SetFittingAlgorithm(fitAlgo);
112 fGeom = new AliEMCALGeometry("EMCAL_COMPLETE12SMV1_DCAL_8SM", "EMCAL");
113 // for (Int_t sm = 0 ; sm < fSuperModules ; sm++){
114 // fTextSM[sm] = NULL ;
118 //____________________________________________________________________________
119 AliEMCALQADataMakerRec::AliEMCALQADataMakerRec(const AliEMCALQADataMakerRec& qadm) :
121 fFittingAlgorithm(0),
125 fSuperModules(qadm.GetSuperModules()),
126 fFirstPedestalSample(qadm.GetFirstPedestalSample()),
127 fLastPedestalSample(qadm.GetLastPedestalSample()),
128 fFirstPedestalSampleTRU(qadm.GetFirstPedestalSampleTRU()),
129 fLastPedestalSampleTRU(qadm.GetLastPedestalSampleTRU()),
130 fMinSignalLG(qadm.GetMinSignalLG()),
131 fMaxSignalLG(qadm.GetMaxSignalLG()),
132 fMinSignalHG(qadm.GetMinSignalHG()),
133 fMaxSignalHG(qadm.GetMaxSignalHG()),
134 fMinSignalTRU(qadm.GetMinSignalTRU()),
135 fMaxSignalTRU(qadm.GetMaxSignalTRU()),
136 fMinSignalLGLEDMon(qadm.GetMinSignalLGLEDMon()),
137 fMaxSignalLGLEDMon(qadm.GetMaxSignalLGLEDMon()),
138 fMinSignalHGLEDMon(qadm.GetMinSignalHGLEDMon()),
139 fMaxSignalHGLEDMon(qadm.GetMaxSignalHGLEDMon()),
140 fCalibRefHistoPro(NULL),
141 fCalibRefHistoH2F(NULL),
142 fLEDMonRefHistoPro(NULL),
143 fHighEmcHistoH2F(NULL)
144 // fTextSM(new TText*[fSuperModules]) ,
149 SetName((const char*)qadm.GetName()) ;
150 SetTitle((const char*)qadm.GetTitle());
151 SetFittingAlgorithm(qadm.GetFittingAlgorithm());
153 // for (Int_t sm = 0 ; sm < fSuperModules ; sm++){
154 // fTextSM[sm] = qadm.fTextSM[sm] ;
158 //__________________________________________________________________
159 AliEMCALQADataMakerRec& AliEMCALQADataMakerRec::operator = (const AliEMCALQADataMakerRec& qadm )
162 this->~AliEMCALQADataMakerRec();
163 new(this) AliEMCALQADataMakerRec(qadm);
166 // for (Int_t sm = 0 ; sm < fSuperModules ; sm++){
167 // fTextSM[sm] = qadm.fTextSM[sm] ;
172 //____________________________________________________________________________
173 void AliEMCALQADataMakerRec::EndOfDetectorCycle(AliQAv1::TASKINDEX_t task, TObjArray ** list)
175 //Detector specific actions at end of cycle
178 // GetRawsData(kNEventsPerTower)->Scale(1./fCycleCounter);
180 // do the QA checking
181 ResetEventTrigClasses(); // reset triggers list to select all histos
182 AliQAChecker::Instance()->Run(AliQAv1::kEMCAL, task, list) ;
185 //____________________________________________________________________________
186 void AliEMCALQADataMakerRec::GetCalibRefFromOCDB()
188 //Get the reference histogram from OCDB
189 TString sName1("hHighEmcalRawMaxMinusMin") ;
190 TString sName2("hLowLEDMonEmcalRawMaxMinusMin") ;
191 sName1.Prepend(Form("%s_", AliRecoParam::GetEventSpecieName(AliRecoParam::kCalib))) ;
192 sName2.Prepend(Form("%s_", AliRecoParam::GetEventSpecieName(AliRecoParam::kCalib))) ;
194 TString refStorage(AliQAv1::GetQARefStorage()) ;
195 if (!refStorage.Contains(AliQAv1::GetLabLocalOCDB()) && !refStorage.Contains(AliQAv1::GetLabAliEnOCDB())) {
196 AliFatal(Form("%s is not a valid location for reference data", refStorage.Data())) ;
198 AliQAManager* manQA = AliQAManager::QAManager(AliQAv1::kRAWS) ;
199 AliQAv1::SetQARefDataDirName(AliRecoParam::kCalib) ;
200 if ( ! manQA->GetLock() ) {
201 manQA->SetDefaultStorage(AliQAv1::GetQARefStorage()) ;
202 manQA->SetSpecificStorage("*", AliQAv1::GetQARefStorage()) ;
203 manQA->SetRun(AliCDBManager::Instance()->GetRun()) ;
206 char * detOCDBDir = Form("%s/%s/%s", GetName(), AliQAv1::GetRefOCDBDirName(), AliQAv1::GetRefDataDirName()) ;
207 AliCDBEntry * entry = manQA->Get(detOCDBDir, manQA->GetRun()) ;
209 TList * listDetQAD =static_cast<TList *>(entry->GetObject()) ;
210 if ( strcmp(listDetQAD->ClassName(), "TList") != 0 ) {
211 AliError(Form("Expected a Tlist and found a %s for detector %s", listDetQAD->ClassName(), GetName())) ;
214 TObjArray * dirOCDB= NULL ;
216 dirOCDB = static_cast<TObjArray *>(listDetQAD->FindObject(Form("%s/%s", AliQAv1::GetTaskName(AliQAv1::kRAWS).Data(), AliRecoParam::GetEventSpecieName(AliRecoParam::kCalib)))) ;
218 fCalibRefHistoPro = dynamic_cast<TProfile *>(dirOCDB->FindObject(sName1.Data())) ;
219 fLEDMonRefHistoPro = dynamic_cast<TProfile *>(dirOCDB->FindObject(sName2.Data())) ;
224 if(fCalibRefHistoPro && fLEDMonRefHistoPro){
226 //Defining histograms binning, each 2D histogram covers all SMs
227 Int_t nSMSectors = fSuperModules / 2; // 2 SMs per sector
228 Int_t nbinsZ = 2*AliEMCALGeoParams::fgkEMCALCols;
229 Int_t nbinsPhi = nSMSectors * AliEMCALGeoParams::fgkEMCALRows;
231 if(!fCalibRefHistoH2F)
232 fCalibRefHistoH2F = new TH2F("hCalibRefHisto", "hCalibRefHisto", nbinsZ, -0.5, nbinsZ - 0.5, nbinsPhi, -0.5, nbinsPhi -0.5);
233 ConvertProfile2H(fCalibRefHistoPro,fCalibRefHistoH2F) ;
235 AliFatal(Form("No reference object with name %s or %s found", sName1.Data(), sName2.Data())) ;
238 //____________________________________________________________________________
239 void AliEMCALQADataMakerRec::InitESDs()
241 //Create histograms to controll ESD
242 const Bool_t expert = kTRUE ;
243 const Bool_t image = kTRUE ;
245 TH1F * h1 = new TH1F("hESDCaloClusterE", "ESDs CaloCluster energy in EMCAL;Energy [GeV];Counts", 200, 0., 100.) ;
247 Add2ESDsList(h1, kESDCaloClusE, !expert, image) ;
249 TH1I * h2 = new TH1I("hESDCaloClusterM", "ESDs CaloCluster multiplicity in EMCAL;# of Clusters;Entries", 100, 0, 100) ;
251 Add2ESDsList(h2, kESDCaloClusM, !expert, image) ;
253 TH1F * h3 = new TH1F("hESDCaloCellA", "ESDs CaloCell amplitude in EMCAL;Energy [GeV];Counts", 500, 0., 50.) ;
255 Add2ESDsList(h3, kESDCaloCellA, !expert, image) ;
257 TH1I * h4 = new TH1I("hESDCaloCellM", "ESDs CaloCell multiplicity in EMCAL;# of Clusters;Entries", 200, 0, 1000) ;
259 Add2ESDsList(h4, kESDCaloCellM, !expert, image) ;
261 ClonePerTrigClass(AliQAv1::kESDS); // this should be the last line
264 //____________________________________________________________________________
265 void AliEMCALQADataMakerRec::InitDigits()
267 // create Digits histograms in Digits subdir
268 const Bool_t expert = kTRUE ;
269 const Bool_t image = kTRUE ;
271 TH1I * h0 = new TH1I("hEmcalDigits", "Digits amplitude distribution in EMCAL;Amplitude [ADC counts];Counts", 500, 0, 500) ;
273 Add2DigitsList(h0, 0, !expert, image) ;
274 TH1I * h1 = new TH1I("hEmcalDigitsMul", "Digits multiplicity distribution in EMCAL;# of Digits;Entries", 200, 0, 2000) ;
276 Add2DigitsList(h1, 1, !expert, image) ;
278 ClonePerTrigClass(AliQAv1::kDIGITS); // this should be the last line
281 //____________________________________________________________________________
282 void AliEMCALQADataMakerRec::InitRecPoints()
284 // create Reconstructed PoInt_ts histograms in RecPoints subdir
285 const Bool_t expert = kTRUE ;
286 const Bool_t image = kTRUE ;
288 TH1F* h0 = new TH1F("hEMCALRpE","EMCAL RecPoint energies;Energy [GeV];Counts",200, 0.,20.); //GeV
290 Add2RecPointsList(h0,kRecPE, !expert, image);
292 TH1I* h1 = new TH1I("hEMCALRpM","EMCAL RecPoint multiplicities;# of Clusters;Entries",100,0,100);
294 Add2RecPointsList(h1,kRecPM, !expert, image);
296 TH1I* h2 = new TH1I("hEMCALRpDigM","EMCAL RecPoint Digit Multiplicities;# of Digits;Entries",20,0,20);
298 Add2RecPointsList(h2,kRecPDigM, !expert, image);
300 ClonePerTrigClass(AliQAv1::kRECPOINTS); // this should be the last line
303 //____________________________________________________________________________
304 void AliEMCALQADataMakerRec::InitRaws()
306 // create Raws histograms in Raws subdir
307 const Bool_t expert = kTRUE ;
308 const Bool_t saveCorr = kTRUE ;
309 const Bool_t image = kTRUE ;
310 const Option_t *profileOption = "s";
312 Int_t nTowersPerSM = AliEMCALGeoParams::fgkEMCALRows * AliEMCALGeoParams::fgkEMCALCols; // number of towers in a SuperModule; 24x48
313 Int_t nTot = fSuperModules * nTowersPerSM; // max number of towers in all SuperModules
315 //Defining histograms binning, each 2D histogram covers all SMs
316 Int_t nSMSectors = fSuperModules / 2; // 2 SMs per sector
317 Int_t nbinsZ = 2*AliEMCALGeoParams::fgkEMCALCols;
318 Int_t nbinsPhi = nSMSectors * AliEMCALGeoParams::fgkEMCALRows;
320 Int_t nTRUCols = 2*AliEMCALGeoParams::fgkEMCALTRUCols; //total TRU columns for 2D TRU histos
321 Int_t nTRURows = nSMSectors*AliEMCALGeoParams::fgkEMCALTRUsPerSM*AliEMCALGeoParams::fgkEMCALTRURows; //total TRU rows for 2D TRU histos
322 // counter info: number of channels per event (bins are SM index)
323 TProfile * h0 = new TProfile("hLowEmcalSupermodules", "Low Gain EMC: # of towers vs SuperMod;SM Id;# of towers",
324 fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
325 Add2RawsList(h0, kNsmodLG, expert, !image, !saveCorr) ;
326 TProfile * h1 = new TProfile("hHighEmcalSupermodules", "High Gain EMC: # of towers vs SuperMod;SM Id;# of towers",
327 fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
328 Add2RawsList(h1, kNsmodHG, expert, !image, !saveCorr) ;
330 // where did max sample occur? (bins are towers)
331 TProfile * h2 = new TProfile("hLowEmcalRawtime", "Low Gain EMC: Time at Max vs towerId;Tower Id;Time [ticks]",
332 nTot, -0.5, nTot-0.5, profileOption) ;
333 Add2RawsList(h2, kTimeLG, expert, !image, !saveCorr) ;
334 TProfile * h3 = new TProfile("hHighEmcalRawtime", "High Gain EMC: Time at Max vs towerId;Tower Id;Time [ticks]",
335 nTot, -0.5, nTot-0.5, profileOption) ;
336 Add2RawsList(h3, kTimeHG, expert, !image, !saveCorr) ;
338 // how much above pedestal was the max sample? (bins are towers)
339 TProfile * h4 = new TProfile("hLowEmcalRawMaxMinusMin", "Low Gain EMC: Max - Min vs towerId;Tower Id;Max-Min [ADC counts]",
340 nTot, -0.5, nTot-0.5, profileOption) ;
341 Add2RawsList(h4, kSigLG, expert, !image, !saveCorr) ;
342 TProfile * h5 = new TProfile("hHighEmcalRawMaxMinusMin", "High Gain EMC: Max - Min vs towerId;Tower Id;Max-Min [ADC counts]",
343 nTot, -0.5, nTot-0.5, profileOption) ;
344 Add2RawsList(h5, kSigHG, expert, !image, !saveCorr) ;
346 // total counter: channels per event
347 TH1I * h6 = new TH1I("hLowNtot", "Low Gain EMC: Total Number of found towers;# of Towers;Counts", 200, 0, nTot) ;
349 Add2RawsList(h6, kNtotLG, expert, !image, !saveCorr) ;
350 TH1I * h7 = new TH1I("hHighNtot", "High Gain EMC: Total Number of found towers;# of Towers;Counts", 200,0, nTot) ;
352 Add2RawsList(h7, kNtotHG, expert, !image, !saveCorr) ;
354 // pedestal (bins are towers)
355 TProfile * h8 = new TProfile("hLowEmcalRawPed", "Low Gain EMC: Pedestal vs towerId;Tower Id;Pedestal [ADC counts]",
356 nTot, -0.5, nTot-0.5, profileOption) ;
357 Add2RawsList(h8, kPedLG, expert, !image, !saveCorr) ;
358 TProfile * h9 = new TProfile("hHighEmcalRawPed", "High Gain EMC: Pedestal vs towerId;Tower Id;Pedestal [ADC counts]",
359 nTot, -0.5, nTot-0.5, profileOption) ;
360 Add2RawsList(h9, kPedHG, expert, !image, !saveCorr) ;
363 // now repeat the same for TRU and LEDMon data
364 Int_t nTot2x2 = fSuperModules * AliEMCALGeoParams::fgkEMCALTRUsPerSM * AliEMCALGeoParams::fgkEMCAL2x2PerTRU; // max number of TRU channels for all SuperModules
366 // counter info: number of channels per event (bins are SM index)
367 TProfile * hT0 = new TProfile("hTRUEmcalSupermodules", "TRU EMC: # of TRU channels vs SuperMod;SM Id;# of TRU channels",
368 fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
369 Add2RawsList(hT0, kNsmodTRU, expert, !image, !saveCorr) ;
371 // how much above pedestal was the max sample? (bins are TRU channels)
372 TProfile * hT1 = new TProfile("hTRUEmcalRawMaxMinusMin", "TRU EMC: Max - Min vs 2x2Id;2x2 Id;Max-Min [ADC counts]",
373 nTot2x2, -0.5, nTot2x2-0.5, profileOption) ;
374 Add2RawsList(hT1, kSigTRU, expert, !image, !saveCorr) ;
376 // total counter: channels per event
377 TH1I * hT2 = new TH1I("hTRUNtot", "TRU EMC: Total Number of found TRU channels;# of TRU Channels;Counts", 200, 0, nTot2x2) ;
379 Add2RawsList(hT2, kNtotTRU, expert, !image, !saveCorr) ;
381 // L0 trigger hits: # of hits (bins are TRU channels)
382 TH2I * hT3 = new TH2I("hTRUEmcalL0hits", "L0 trigger hits: Total number of 2x2 L0 generated", nTRUCols, -0.5, nTRUCols - 0.5, nTRURows, -0.5, nTRURows-0.5);
383 hT3->SetOption("COLZ");
385 Add2RawsList(hT3, kNL0TRU, expert, image, !saveCorr);
387 // L0 trigger hits: average time (bins are TRU channels)
388 TProfile2D * hT4 = new TProfile2D("hTRUEmcalL0hitsAvgTime", "L0 trigger hits: average time bin", nTRUCols, -0.5, nTRUCols - 0.5, nTRURows, -0.5, nTRURows-0.5, profileOption);
389 hT4->SetOption("COLZ");
390 Add2RawsList(hT4, kTimeL0TRU, expert, image, !saveCorr);
392 // L0 trigger hits: first in the event (bins are TRU channels)
393 TH1I * hT5 = new TH1I("hTRUEmcalL0hitsFirst", "L0 trigger hits: First hit in the event", nTot2x2, -0.5, nTot2x2);
395 Add2RawsList(hT5, kNL0FirstTRU, expert, !image, !saveCorr);
397 // L0 trigger hits: average time of first hit in the event (bins are TRU channels)
398 TProfile * hT6 = new TProfile("hTRUEmcalL0hitsFirstAvgTime", "L0 trigger hits: average time of first hit", nTot2x2, -0.5, nTot2x2, profileOption);
399 Add2RawsList(hT6, kTimeL0FirstTRU, expert, !image, !saveCorr);
401 // and also LED Mon..
402 // LEDMon has both high and low gain channels, just as regular FEE/towers
403 Int_t nTotLEDMon = fSuperModules * AliEMCALGeoParams::fgkEMCALLEDRefs; // max number of LEDMon channels for all SuperModules
405 // counter info: number of channels per event (bins are SM index)
406 TProfile * hL0 = new TProfile("hLowLEDMonEmcalSupermodules", "LowLEDMon Gain EMC: # of strips vs SuperMod;SM Id;# of strips",
407 fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
408 Add2RawsList(hL0, kNsmodLGLEDMon, expert, !image, !saveCorr) ;
409 TProfile * hL1 = new TProfile("hHighLEDMonEmcalSupermodules", "HighLEDMon Gain EMC: # of strips vs SuperMod;SM Id;# of strips",
410 fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
411 Add2RawsList(hL1, kNsmodHGLEDMon, expert, !image, !saveCorr) ;
413 // where did max sample occur? (bins are strips)
414 TProfile * hL2 = new TProfile("hLowLEDMonEmcalRawtime", "LowLEDMon Gain EMC: Time at Max vs stripId;Strip Id;Time [ticks]",
415 nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
416 Add2RawsList(hL2, kTimeLGLEDMon, expert, !image, !saveCorr) ;
417 TProfile * hL3 = new TProfile("hHighLEDMonEmcalRawtime", "HighLEDMon Gain EMC: Time at Max vs stripId;Strip Id;Time [ticks]",
418 nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
419 Add2RawsList(hL3, kTimeHGLEDMon, expert, !image, !saveCorr) ;
421 // how much above pedestal was the max sample? (bins are strips)
422 TProfile * hL4 = new TProfile("hLowLEDMonEmcalRawMaxMinusMin", "LowLEDMon Gain EMC: Max - Min vs stripId;Strip Id;Max-Min [ADC counts]",
423 nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
424 Add2RawsList(hL4, kSigLGLEDMon, expert, !image, !saveCorr) ;
425 TProfile * hL5 = new TProfile("hHighLEDMonEmcalRawMaxMinusMin", "HighLEDMon Gain EMC: Max - Min vs stripId;Strip Id;Max-Min [ADC counts]",
426 nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
427 Add2RawsList(hL5, kSigHGLEDMon, expert, !image, !saveCorr) ;
429 // total counter: channels per event
430 TH1I * hL6 = new TH1I("hLowLEDMonNtot", "LowLEDMon Gain EMC: Total Number of found strips;# of Strips;Counts", 200, 0, nTotLEDMon) ;
432 Add2RawsList(hL6, kNtotLGLEDMon, expert, !image, !saveCorr) ;
433 TH1I * hL7 = new TH1I("hHighLEDMonNtot", "HighLEDMon Gain EMC: Total Number of found strips;# of Strips;Counts", 200,0, nTotLEDMon) ;
435 Add2RawsList(hL7, kNtotHGLEDMon, expert, !image, !saveCorr) ;
437 // pedestal (bins are strips)
438 TProfile * hL8 = new TProfile("hLowLEDMonEmcalRawPed", "LowLEDMon Gain EMC: Pedestal vs stripId;Strip Id;Pedestal [ADC counts]",
439 nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
440 Add2RawsList(hL8, kPedLGLEDMon, expert, !image, !saveCorr) ;
441 TProfile * hL9 = new TProfile("hHighLEDMonEmcalRawPed", "HighLEDMon Gain EMC: Pedestal vs stripId;Strip Id;Pedestal [ADC counts]",
442 nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
443 Add2RawsList(hL9, kPedHGLEDMon, expert, !image, !saveCorr) ;
445 //temp 2D amplitude histogram for the current run
446 fHighEmcHistoH2F = new TH2F("h2DHighEC2", "High Gain EMC:Max - Min [ADC counts]", nbinsZ, -0.5 , nbinsZ-0.5, nbinsPhi, -0.5, nbinsPhi-0.5);
447 fHighEmcHistoH2F->SetDirectory(0) ; // this histo must be memory resident
448 //add ratio histograms: to comapre the current run with the reference data
449 TH2F * h15 = new TH2F("h2DRatioAmp", "High Gain Ratio to Reference:Amplitude_{current run}/Amplitude_{reference run}", nbinsZ, -0.5 , nbinsZ-0.5,
450 nbinsPhi, -0.5, nbinsPhi-0.5);
451 //settings for display in amore
452 h15->SetTitle("Amplitude_{current run}/Amplitude_{reference run}");
453 h15->SetMaximum(2.0);
454 h15->SetMinimum(0.1);
455 h15->SetOption("COLZ");
456 gStyle->SetOptStat(0);
457 Int_t color[] = {4,3,2} ;
458 gStyle->SetPalette(3,color);
459 h15->GetZaxis()->SetNdivisions(3);
460 h15->UseCurrentStyle();
461 h15->SetDirectory(0);
462 Add2RawsList(h15, k2DRatioAmp, expert, image, !saveCorr) ;
464 TH1F * h16 = new TH1F("hRatioDist", "Amplitude_{current run}/Amplitude_{reference run} ratio distribution", nTot, 0., 2.);
465 // h16->SetMinimum(0.1);
466 // h16->SetMaximum(100.);
467 gStyle->SetOptStat(0);
468 h16->UseCurrentStyle();
469 h16->SetDirectory(0);
470 Add2RawsList(h16, kRatioDist, !expert, image, !saveCorr) ;
472 //add two histograms for shifter from the LED monitor system: comapre LED monitor with the reference run
473 //to be used for decision whether we need to change reference data
474 TH1F * hL10 = new TH1F("hMaxMinusMinLEDMonRatio", "LEDMon amplitude, Ratio to reference run", nTotLEDMon, -0.5, nTotLEDMon-0.5) ;
475 //settings for display in amore
476 hL10->SetTitle("Amplitude_{LEDMon current}/Amplitude_{LEDMon reference}");
477 hL10->SetMaximum(2.0);
478 hL10->SetMinimum(0.1);
479 gStyle->SetOptStat(0);
480 hL10->UseCurrentStyle();
481 hL10->SetDirectory(0);
482 // hL10->SetOption("E");
483 Add2RawsList(hL10, kLEDMonRatio, expert, image, !saveCorr) ;
485 TH1F * hL11 = new TH1F("hMaxMinusMinLEDMonRatioDist", "LEDMon amplitude, Ratio distribution", nTotLEDMon, 0, 2);
486 // hL11->SetMinimum(0.1) ;
487 gStyle->SetOptStat(0);
488 hL11->UseCurrentStyle();
489 hL11->SetDirectory(0);
490 Add2RawsList(hL11, kLEDMonRatioDist, expert, image, !saveCorr) ;
492 GetCalibRefFromOCDB();
498 Int_t nSTUCols = AliEMCALGeoParams::fgkEMCALSTUCols;
499 Int_t nSTURows = AliEMCALGeoParams::fgkEMCALSTURows;
500 // kAmpL1, kGL1, kJL1,
501 // kGL1V0, kJL1V0, kSTUTRU
503 TProfile2D *hS0 = new TProfile2D("hL1Amp", "Mean STU signal per Row and Column", nSTUCols, -0.5, nSTUCols-0.5, nSTURows, -0.5, nSTURows-0.5);
504 Add2RawsList(hS0, kAmpL1, expert, !image, !saveCorr) ;
506 TH2F *hS1 = new TH2F("hL1Gamma", "L1 Gamma patch position (FastOR top-left)", nSTUCols, -0.50, nSTUCols-0.5, nSTURows + 5, -0.5, nSTURows-0.5 + 5); //+5 for better visible error box
507 Add2RawsList(hS1, kGL1, !expert, image, !saveCorr) ;
509 TH2F *hS2 = new TH2F("hL1Jet", "L1 Jet patch position (FastOR top-left)", 12, -0.5, nSTUCols-0.5, 16, 0, nSTURows-0.5);
510 Add2RawsList(hS2, kJL1, !expert, image, !saveCorr) ;
512 TH2I *hS3 = new TH2I("hL1GV0", "L1 Gamma patch amplitude versus V0 signal", 500, 0, 50000, 1500, 0, 1500);
513 Add2RawsList(hS3, kGL1V0, expert, image, !saveCorr) ;
515 TH2I *hS4 = new TH2I("hL1JV0", "L1 Jet patch amplitude versus V0 signal", 500, 0, 50000, 1000, 0, 1000);
516 Add2RawsList(hS4, kJL1V0, expert, !image, !saveCorr) ;
518 TH1I *hS5 = new TH1I("hFrameR","Link between TRU and STU", 32, 0, 32);
519 Add2RawsList(hS5, kSTUTRU, !expert, image, !saveCorr) ;
521 hS0->SetOption("COLZ");
522 hS1->SetOption("COLZ");
523 hS2->SetOption("COLZ");
524 hS3->SetOption("COLZ");
525 hS4->SetOption("COLZ");
528 ClonePerTrigClass(AliQAv1::kRAWS); // this should be the last line
531 //____________________________________________________________________________
532 void AliEMCALQADataMakerRec::MakeESDs(AliESDEvent * esd)
534 // make QA data from ESDs
537 for ( Int_t index = 0; index < esd->GetNumberOfCaloClusters() ; index++ ) {
538 AliESDCaloCluster * clu = esd->GetCaloCluster(index) ;
539 if( clu->IsEMCAL() ) {
540 FillESDsData(kESDCaloClusE,clu->E()) ;
544 FillESDsData(kESDCaloClusM,nTot) ;
547 AliESDCaloCells* cells = esd->GetEMCALCells();
548 FillESDsData(kESDCaloCellM,cells->GetNumberOfCells()) ;
550 for ( Int_t index = 0; index < cells->GetNumberOfCells() ; index++ ) {
551 FillESDsData(kESDCaloCellA,cells->GetAmplitude(index)) ;
554 IncEvCountCycleESDs();
555 IncEvCountTotalESDs();
558 //____________________________________________________________________________
559 void AliEMCALQADataMakerRec::MakeRaws(AliRawReader* rawReader)
561 // Check that all the reference histograms exist before we try to use them - otherwise call InitRaws
562 // RS: Attention: the counters are increments after custom modification of eventSpecie
563 if (!fCalibRefHistoPro || !fCalibRefHistoH2F || !fLEDMonRefHistoPro || !fHighEmcHistoH2F) {
567 // make sure EMCal was readout during the event
568 Int_t emcID = AliDAQ::DetectorID("EMCAL"); // bit 18..
569 const UInt_t *detPattern = rawReader->GetDetectorPattern();
570 UInt_t emcInReadout = ( ((1 << emcID) & detPattern[0]) >> emcID);
571 if (! emcInReadout) return; // no poInt_t in looking at this event, if no EMCal data
575 AliCaloRawStreamV3 in(rawReader,"EMCAL");
576 rawReader->Select("EMCAL", 0, AliEMCALGeoParams::fgkLastAltroDDL) ; //select EMCAL DDL's
578 AliRecoParam::EventSpecie_t saveSpecie = fEventSpecie ;
579 if (rawReader->GetType() == AliRawEventHeaderBase::kCalibrationEvent) {
580 SetEventSpecie(AliRecoParam::kCalib) ;
583 const Int_t nTowersPerSM = AliEMCALGeoParams::fgkEMCALRows * AliEMCALGeoParams::fgkEMCALCols; // number of towers in a SuperModule; 24x48
584 const Int_t nRows = AliEMCALGeoParams::fgkEMCALRows; // number of rows per SuperModule
585 const Int_t nStripsPerSM = AliEMCALGeoParams::fgkEMCALLEDRefs; // number of strips per SuperModule
586 const Int_t n2x2PerSM = AliEMCALGeoParams::fgkEMCALTRUsPerSM * AliEMCALGeoParams::fgkEMCAL2x2PerTRU; // number of TRU 2x2's per SuperModule
587 const Int_t n2x2PerTRU = AliEMCALGeoParams::fgkEMCAL2x2PerTRU;
588 const Int_t nTot2x2 = fSuperModules * n2x2PerSM; // total TRU channel
590 // SM counters; decl. should be safe, assuming we don't get more than expected SuperModules..
591 Int_t nTotalSMLG[AliEMCALGeoParams::fgkEMCALModules] = {0};
592 Int_t nTotalSMHG[AliEMCALGeoParams::fgkEMCALModules] = {0};
593 Int_t nTotalSMTRU[AliEMCALGeoParams::fgkEMCALModules] = {0};
594 Int_t nTotalSMLGLEDMon[AliEMCALGeoParams::fgkEMCALModules] = {0};
595 Int_t nTotalSMHGLEDMon[AliEMCALGeoParams::fgkEMCALModules] = {0};
597 const Int_t nTRUL0ChannelBits = 10; // used for L0 trigger bits checks
598 int firstL0TimeBin = 999;
599 int triggers[nTot2x2][24]; //auxiliary array for L0 trigger - TODO remove hardcoded 24
600 memset(triggers, 0, sizeof(int) * 24 * nTot2x2);
602 Int_t iSM = 0; // SuperModule index
603 // start loop over input stream
604 while (in.NextDDL()) {
605 Int_t iRCU = in.GetDDLNumber() % 2; // RCU0 or RCU1, within SuperModule
606 Int_t iDDL = in.GetDDLNumber();
607 fRawAnalyzer->SetIsZeroSuppressed( in.GetZeroSupp() );
609 while (in.NextChannel()) {
610 Int_t iBranch = in.GetBranch();
612 iSM = in.GetModule(); // SuperModule
613 //prInt_tf("iSM %d DDL %d", iSM, in.GetDDLNumber());
614 if (iSM>=0 && iSM<fSuperModules) { // valid module reading
617 vector<AliCaloBunchInfo> bunchlist;
618 while (in.NextBunch()) {
619 nsamples += in.GetBunchLength();
620 bunchlist.push_back( AliCaloBunchInfo(in.GetStartTimeBin(), in.GetBunchLength(), in.GetSignals() ) );
623 if (nsamples > 0) { // this check is needed for when we have zero-supp. on, but not sparse readout
626 // indices for pedestal calc.
627 Int_t firstPedSample = 0;
628 Int_t lastPedSample = 0;
629 bool isTRUL0IdData = false;
631 if (! in.IsTRUData() ) { // high gain, low gain, LED Mon data - all have the same shaper/sampling
632 AliCaloFitResults fitResults = fRawAnalyzer->Evaluate( bunchlist, in.GetAltroCFG1(), in.GetAltroCFG2());
633 amp = fitResults.GetAmp();
634 time = fitResults.GetTof();
635 firstPedSample = fFirstPedestalSample;
636 lastPedSample = fLastPedestalSample;
638 else { // TRU data is special, needs its own analyzer
639 AliCaloFitResults fitResults = fRawAnalyzerTRU->Evaluate( bunchlist, in.GetAltroCFG1(), in.GetAltroCFG2());
640 amp = fitResults.GetAmp();
641 time = fitResults.GetTof();
642 firstPedSample = fFirstPedestalSampleTRU;
643 lastPedSample = fLastPedestalSampleTRU;
644 if (in.GetColumn() >= n2x2PerTRU) {
645 isTRUL0IdData = true;
651 vector<Int_t> pedSamples;
653 // select earliest bunch
654 unsigned int bunchIndex = 0;
655 unsigned int startBin = bunchlist.at(0).GetStartBin();
656 if (bunchlist.size() > 0) {
657 for(unsigned int ui=1; ui < bunchlist.size(); ui++ ) {
658 if (startBin > bunchlist.at(ui).GetStartBin() ) {
659 startBin = bunchlist.at(ui).GetStartBin();
665 // check bunch for entries in the pedestal sample range
666 Int_t bunchLength = bunchlist.at(bunchIndex).GetLength();
667 const UShort_t *sig = bunchlist.at(bunchIndex).GetData();
670 if (! isTRUL0IdData) { // regular data, can look at pedestals
671 for (Int_t i = 0; i<bunchLength; i++) {
672 timebin = startBin--;
673 if ( firstPedSample<=timebin && timebin<=lastPedSample ) {
674 pedSamples.push_back( sig[i] );
679 else { // TRU L0 Id Data
680 // which TRU the channel belongs to?
681 Int_t iTRUId = in.GetModule()*3 + (iRCU*in.GetBranch() + iRCU);
683 for (Int_t i = 0; i< bunchLength; i++) {
684 for( Int_t j = 0; j < nTRUL0ChannelBits; j++ ){
685 // check if the bit j is 1
686 if( (sig[i] & ( 1 << j )) > 0 ){
687 Int_t iTRUIdInSM = (in.GetColumn() - n2x2PerTRU)*nTRUL0ChannelBits+j;
688 if(iTRUIdInSM < n2x2PerTRU) {
689 Int_t iTRUAbsId = iTRUIdInSM + n2x2PerTRU * iTRUId;
690 // Fill the histograms
691 Int_t globTRUCol, globTRURow;
692 GetTruChannelPosition(globTRURow, globTRUCol, iSM, iDDL, iBranch, iTRUIdInSM );
694 FillRawsData(kNL0TRU, globTRUCol, globTRURow);
695 FillRawsData(kTimeL0TRU, globTRUCol, globTRURow, startBin);
696 triggers[iTRUAbsId][startBin] = 1;
698 if((int)startBin < firstL0TimeBin) firstL0TimeBin = startBin;
707 if ( in.IsLowGain() || in.IsHighGain() ) { // regular towers
708 Int_t towerId = iSM*nTowersPerSM + in.GetColumn()*nRows + in.GetRow();
709 if ( in.IsLowGain() ) {
711 if ( (amp > fMinSignalLG) && (amp < fMaxSignalLG) ) {
712 FillRawsData(kSigLG,towerId, amp);
713 FillRawsData(kTimeLG,towerId, time);
716 for (Int_t i=0; i<nPed; i++) {
717 FillRawsData(kPedLG,towerId, pedSamples[i]);
721 else if ( in.IsHighGain() ) {
723 if ( (amp > fMinSignalHG) && (amp < fMaxSignalHG) ) {
724 FillRawsData(kSigHG,towerId, amp);
725 FillRawsData(kTimeHG,towerId, time);
728 for (Int_t i=0; i<nPed; i++) {
729 FillRawsData(kPedHG,towerId, pedSamples[i]);
733 } // low or high gain
735 else if ( in.IsTRUData() && in.GetColumn()<AliEMCALGeoParams::fgkEMCAL2x2PerTRU) {
736 // for TRU data, the mapping class holds the TRU Int_ternal 2x2 number (0..95) in the Column var..
737 Int_t iTRU = (iRCU*in.GetBranch() + iRCU); //TRU0 is from RCU0, TRU1 from RCU1, TRU2 is from branch B on RCU1
738 Int_t iTRU2x2Id = iSM*n2x2PerSM + iTRU*AliEMCALGeoParams::fgkEMCAL2x2PerTRU
741 if ( (amp > fMinSignalTRU) && (amp < fMaxSignalTRU) ) {
742 FillRawsData(kSigTRU,iTRU2x2Id, amp);
743 //FillRawsData(kTimeTRU,iTRU2x2Id, time);
746 //for (Int_t i=0; i<nPed; i++) {
747 //FillRawsData(kPedTRU,iTRU2x2Id, pedSamples[i]);
752 else if ( in.IsLEDMonData() ) {
753 // for LED Mon data, the mapping class holds the gain info in the Row variable
754 // and the Strip number in the Column..
755 Int_t gain = in.GetRow();
756 Int_t stripId = iSM*nStripsPerSM + in.GetColumn();
759 nTotalSMLGLEDMon[iSM]++;
760 if ( (amp > fMinSignalLGLEDMon) && (amp < fMaxSignalLGLEDMon) ) {
761 FillRawsData(kSigLGLEDMon,stripId, amp);
762 FillRawsData(kTimeLGLEDMon,stripId, time);
765 for (Int_t i=0; i<nPed; i++) {
766 FillRawsData(kPedLGLEDMon,stripId, pedSamples[i]);
770 else if ( gain == 1 ) {
771 nTotalSMHGLEDMon[iSM]++;
772 if ( (amp > fMinSignalHGLEDMon) && (amp < fMaxSignalHGLEDMon) ) {
773 FillRawsData(kSigHGLEDMon,stripId, amp);
774 FillRawsData(kTimeHGLEDMon,stripId, time);
777 for (Int_t i=0; i<nPed; i++) {
778 FillRawsData(kPedHGLEDMon,stripId, pedSamples[i]);
781 } // low or high gain
786 } // nsamples>0 check, some data found for this channel; not only trailer/header
787 }// end while over channel
789 }//end while over DDL's, of input stream
790 //filling some L0 trigger histos
791 if( firstL0TimeBin < 999 ){
792 for(Int_t i = 0; i < nTot2x2; i++) {
793 if( triggers[i][firstL0TimeBin] > 0 ) {
795 FillRawsData(kNL0FirstTRU, i);
796 FillRawsData(kTimeL0FirstTRU, i, firstL0TimeBin);
801 //calculate the ratio of the amplitude and fill the histograms, only if the events type is Calib
802 // RS: operation on the group of histos kSigHG,k2DRatioAmp,kRatioDist,kLEDMonRatio,kLEDMonRatio,kSigLGLEDMon
803 const int hGrp[] = {kSigHG,k2DRatioAmp,kRatioDist,kLEDMonRatio,kLEDMonRatioDist,kSigLGLEDMon};
804 if ( rawReader->GetType() == AliRawEventHeaderBase::kCalibrationEvent &&
805 CheckCloningConsistency(fRawsQAList, hGrp, sizeof(hGrp)/sizeof(int)) ) { // RS converting original code to loop over all matching triggers
806 int nTrig =IsClonedPerTrigClass(kSigHG,fRawsQAList) ? GetNEventTrigClasses() : 0; // loop over triggers only if histos were cloned
808 for (int itr=-1;itr<nTrig;itr++) { // start from -1 to acknowledge original histos if they were kept
809 TObjArray* trArr = GetMatchingRawsHistosSet(hGrp, sizeof(hGrp)/sizeof(int) ,itr);
810 if (!trArr) continue; // no histos for current trigger
812 Double_t binContent = 0.;
813 TProfile* prSigHG = (TProfile *)trArr->At(0); //kSigHG
814 TH1* th2DRatioAmp = (TH1*) trArr->At(1); //k2DRatioAmp
815 TH1* thRatioDist = (TH1*) trArr->At(2); //kRatioDist
816 TH1* thLEDMonRatio = (TH1*) trArr->At(3); //kLEDMonRatio
817 TH1* thLEDMonRatioDist = (TH1*) trArr->At(4); //kLEDMonRatio
818 TH1* hSigLGLEDMon = (TH1*) trArr->At(5); //kSigLGLEDMon
819 th2DRatioAmp->Reset("ICE");
820 thRatioDist->Reset("ICE");
821 thLEDMonRatio->Reset("ICE");
822 thLEDMonRatioDist->Reset("ICE");
823 th2DRatioAmp->ResetStats();
824 thRatioDist->ResetStats();
825 thLEDMonRatio->ResetStats();
826 thLEDMonRatioDist->ResetStats();
827 ConvertProfile2H(prSigHG, fHighEmcHistoH2F);
829 for(Int_t ix = 1; ix <= fHighEmcHistoH2F->GetNbinsX(); ix++) {
830 for(Int_t iy = 1; iy <= fHighEmcHistoH2F->GetNbinsY(); iy++) {
831 if(fCalibRefHistoH2F->GetBinContent(ix, iy))
832 binContent = fHighEmcHistoH2F->GetBinContent(ix, iy)/fCalibRefHistoH2F->GetBinContent(ix, iy);
833 th2DRatioAmp->SetBinContent(ix, iy, binContent);
834 thRatioDist->Fill(binContent);
838 //Now for LED monitor system, to calculate the ratio as well
839 Double_t binError = 0. ;
840 // for the binError, we add the relative errors, squared
841 Double_t relativeErrorSqr = 0. ;
843 for(int ib = 1; ib <= fLEDMonRefHistoPro->GetNbinsX(); ib++) {
845 if(fLEDMonRefHistoPro->GetBinContent(ib) != 0) {
846 binContent = hSigLGLEDMon->GetBinContent(ib) / fLEDMonRefHistoPro->GetBinContent(ib);
848 relativeErrorSqr = TMath::Power( (fLEDMonRefHistoPro->GetBinError(ib) / fLEDMonRefHistoPro->GetBinContent(ib)), 2);
849 if( hSigLGLEDMon->GetBinContent(ib) != 0) {
850 relativeErrorSqr += TMath::Power( (hSigLGLEDMon->GetBinError(ib)/hSigLGLEDMon->GetBinContent(ib)), 2);
853 else { // ref. run info is zero
855 relativeErrorSqr = 1;
857 thLEDMonRatio->SetBinContent(ib, binContent);
859 binError = sqrt(relativeErrorSqr) * binContent;
860 thLEDMonRatio->SetBinError(ib, binError);
861 thLEDMonRatioDist->Fill(thLEDMonRatio->GetBinContent(ib));
863 } // loop over eventual trigger clones
865 // let's also fill the SM and event counter histograms
869 Int_t nTotalHGLEDMon = 0;
870 Int_t nTotalLGLEDMon = 0;
871 for (iSM=0; iSM<fSuperModules; iSM++) {
872 nTotalLG += nTotalSMLG[iSM];
873 nTotalHG += nTotalSMHG[iSM];
874 nTotalTRU += nTotalSMTRU[iSM];
875 nTotalLGLEDMon += nTotalSMLGLEDMon[iSM];
876 nTotalHGLEDMon += nTotalSMHGLEDMon[iSM];
877 FillRawsData(kNsmodLG,iSM, nTotalSMLG[iSM]);
878 FillRawsData(kNsmodHG,iSM, nTotalSMHG[iSM]);
879 FillRawsData(kNsmodTRU,iSM, nTotalSMTRU[iSM]);
880 FillRawsData(kNsmodLGLEDMon,iSM, nTotalSMLGLEDMon[iSM]);
881 FillRawsData(kNsmodHGLEDMon,iSM, nTotalSMHGLEDMon[iSM]);
884 FillRawsData(kNtotLG,nTotalLG);
885 FillRawsData(kNtotHG,nTotalHG);
886 FillRawsData(kNtotTRU,nTotalTRU);
887 FillRawsData(kNtotLGLEDMon,nTotalLGLEDMon);
888 FillRawsData(kNtotHGLEDMon,nTotalHGLEDMon);
890 IncEvCountCycleESDs();
891 IncEvCountTotalESDs();
892 SetEventSpecie(saveSpecie) ;
894 MakeRawsSTU(rawReader);
896 // just in case the next rawreader consumer forgets to reset; let's do it here again..
901 //____________________________________________________________________________
902 void AliEMCALQADataMakerRec::MakeDigits()
904 // makes data from Digits
905 FillDigitsData(1,fDigitsArray->GetEntriesFast()) ;
906 TIter next(fDigitsArray) ;
907 AliEMCALDigit * digit ;
908 while ( (digit = dynamic_cast<AliEMCALDigit *>(next())) ) {
909 FillDigitsData(0, digit->GetAmplitude()) ;
914 //____________________________________________________________________________
915 void AliEMCALQADataMakerRec::MakeDigits(TTree * digitTree)
917 // makes data from Digit Tree
918 // RS: Attention: the counters are increments in the MakeDigits()
920 fDigitsArray->Clear("C") ;
922 fDigitsArray = new TClonesArray("AliEMCALDigit", 1000) ;
924 TBranch * branch = digitTree->GetBranch("EMCAL") ;
925 if ( ! branch ) { AliWarning("EMCAL branch in Digit Tree not found"); return; }
927 branch->SetAddress(&fDigitsArray) ;
928 branch->GetEntry(0) ;
931 IncEvCountCycleDigits();
932 IncEvCountTotalDigits();
936 //____________________________________________________________________________
937 void AliEMCALQADataMakerRec::MakeRecPoints(TTree * clustersTree)
939 // makes data from RecPoints
940 TBranch *emcbranch = clustersTree->GetBranch("EMCALECARP");
942 AliError("can't get the branch with the EMCAL clusters !");
946 TObjArray * emcRecPoints = new TObjArray(100) ;
947 emcbranch->SetAddress(&emcRecPoints);
948 emcbranch->GetEntry(0);
950 FillRecPointsData(kRecPM,emcRecPoints->GetEntriesFast()) ;
951 TIter next(emcRecPoints) ;
952 AliEMCALRecPoint * rp ;
953 while ( (rp = dynamic_cast<AliEMCALRecPoint *>(next())) ) {
954 FillRecPointsData(kRecPE,rp->GetEnergy()) ;
955 FillRecPointsData(kRecPDigM,rp->GetMultiplicity());
957 emcRecPoints->Delete();
959 IncEvCountCycleRecPoints();
960 IncEvCountTotalRecPoints();
963 //____________________________________________________________________________
964 void AliEMCALQADataMakerRec::StartOfDetectorCycle()
966 //Detector specific actions at start of cycle
970 //____________________________________________________________________________
971 void AliEMCALQADataMakerRec::SetFittingAlgorithm(Int_t fitAlgo)
973 //Set fitting algorithm and initialize it if this same algorithm was not set before.
975 fFittingAlgorithm = fitAlgo; // Not sure we need this
977 fRawAnalyzer = AliCaloRawAnalyzerFactory::CreateAnalyzer(fitAlgo);
979 // Init also here the TRU algo, even if it is fixed type.
980 fRawAnalyzerTRU = AliCaloRawAnalyzerFactory::CreateAnalyzer(Algo::kFakeAltro);
981 fRawAnalyzerTRU->SetFixTau(kTRUE);
982 fRawAnalyzerTRU->SetTau(2.5); // default for TRU shaper
985 //_____________________________________________________________________________________
986 void AliEMCALQADataMakerRec::ConvertProfile2H(TProfile * p, TH2 * histo)
989 histo->Reset("ICE") ;
992 Int_t nbinsProf = p->GetNbinsX();
994 // loop through the TProfile p and fill the TH2F histo
997 Double_t binContent = 0;
998 Int_t towerNum = 0; // global tower Id
999 // i = 0; // tower Id within SuperModule
1000 Int_t iSM = 0; // SuperModule index
1001 Int_t iSMSide = 0; // 0=A, 1=C side
1002 Int_t iSMSector = 0; // 2 SM's per sector
1004 // indices for 2D plots
1008 for (Int_t ibin = 1; ibin <= nbinsProf; ibin++) {
1009 towerNum = (Int_t) p->GetBinCenter(ibin);
1010 binContent = p->GetBinContent(ibin);
1012 // figure out what the tower indices are: col, row within a SuperModule
1013 iSM = towerNum/(AliEMCALGeoParams::fgkEMCALRows * AliEMCALGeoParams::fgkEMCALCols);
1014 col = (towerNum/AliEMCALGeoParams::fgkEMCALRows) % (AliEMCALGeoParams::fgkEMCALCols);
1015 row = towerNum % (AliEMCALGeoParams::fgkEMCALRows);
1017 //DecodeTowerNum(towerNum, &SM, &col, &row);
1018 // then we calculate what the global 2D coord are, based on which SM
1020 iSMSector = iSM / 2;
1023 if (iSMSide == 1) { // C side, shown to the right
1024 col2d = col + AliEMCALGeoParams::fgkEMCALCols;
1026 else { // A side, shown to the left
1030 row2d = row + iSMSector * AliEMCALGeoParams::fgkEMCALRows;
1032 histo->SetBinContent(col2d+1, row2d+1, binContent);
1035 //____________________________________________________________________________
1036 void AliEMCALQADataMakerRec::GetTruChannelPosition( Int_t &globRow, Int_t &globColumn, Int_t module, Int_t ddl, Int_t branch, Int_t column ) const
1037 { // from local to global indices
1047 // 12 rows of 2x2s in a module (3 TRUs by 4 rows)
1048 mrow = (module/2) * 12;
1049 // 24 columns per module, odd module numbers increased by 24
1050 mcol = (module%2) * 24;
1052 // position within TRU coordinates
1057 if( module%2 == 0 ){ // A side
1061 // TRU in module row addition
1062 drow = (rcu*branch+rcu) * 4;
1069 // TRU in module row addition
1070 drow = (2 - (rcu*branch+rcu)) * 4;
1073 // output global row/collumn position (0,0 = SMA0, phi = 0, |eta| = max)
1074 globRow = mrow + drow + trow;
1075 globColumn = mcol + tcol;
1079 //____________________________________________________________________________
1080 void AliEMCALQADataMakerRec::MakeRawsSTU(AliRawReader* rawReader)
1082 AliEMCALTriggerSTURawStream* inSTU = new AliEMCALTriggerSTURawStream(rawReader);
1085 rawReader->Select("EMCAL", 44);
1088 Int_t sizeL1gsubr = 1;
1089 Int_t sizeL1gpatch = 2;
1090 Int_t sizeL1jsubr = 4;
1092 Int_t iEMCALtrig[AliEMCALGeoParams::fgkEMCALSTUCols][AliEMCALGeoParams::fgkEMCALSTURows];
1093 memset(iEMCALtrig, 0, sizeof(int) * AliEMCALGeoParams::fgkEMCALSTUCols * AliEMCALGeoParams::fgkEMCALSTURows);
1095 if (inSTU->ReadPayLoad())
1097 //Fw version (use in case of change in L1 jet
1098 Int_t fw = inSTU->GetFwVersion();
1099 Int_t sizeL1jpatch = 2+(fw >> 16);
1102 Int_t mask = inSTU->GetFrameReceived() ^ inSTU->GetRegionEnable();
1104 for (int i = 0; i < 32; i++)
1106 if (!((mask >> i) & 0x1)) FillRawsData(kSTUTRU, i);
1110 Int_t iV0Sig = inSTU->GetV0A()+inSTU->GetV0C();
1112 //FastOR amplitude receive from TRU
1113 for (Int_t i = 0; i < 32; i++)
1116 for (Int_t j = 0; j < 96; j++) adc[j] = 0;
1118 inSTU->GetADC(i, adc);
1120 Int_t iTRU = fGeom->GetTRUIndexFromSTUIndex(i);
1122 for (Int_t j = 0; j < 96; j++)
1125 fGeom->GetAbsFastORIndexFromTRU(iTRU, j, idx);
1128 fGeom->GetPositionInEMCALFromAbsFastORIndex(idx, px, py);
1130 iEMCALtrig[px][py] = adc[j];
1135 Int_t iTRUSTU, x, y;
1136 for (Int_t i = 0; i < inSTU->GetNL1GammaPatch(0); i++)
1138 if (inSTU->GetL1GammaPatch(i, 0, iTRUSTU, x, y)) // col (0..23), row (0..3)
1141 iTRU = fGeom->GetTRUIndexFromSTUIndex(iTRUSTU);
1143 Int_t etaG = 23-x, phiG = y + 4 * int(iTRU/2); //position in EMCal
1144 if (iTRU%2) etaG += 24; //C-side
1146 etaG = etaG - sizeL1gsubr * sizeL1gpatch + 1;
1148 //Position of patch L1G (bottom-left FastOR of the patch)
1149 FillRawsData(kGL1, etaG, phiG);
1151 //loop to sum amplitude of FOR in the gamma patch
1152 Int_t iL1GPatchAmp = 0;
1153 for (Int_t L1Gx = 0; L1Gx < sizeL1gpatch; L1Gx ++)
1155 for (Int_t L1Gy = 0; L1Gy < sizeL1gpatch; L1Gy ++)
1157 if (etaG+L1Gx < 48 && phiG+L1Gy < 64) iL1GPatchAmp += iEMCALtrig[etaG+L1Gx][phiG+L1Gy];
1158 //cout << iEMCALtrig[etaG+L1Gx][phiG+L1Gy] << endl;
1162 //if (iL1GPatchAmp > 500) cout << "L1G amp =" << iL1GPatchAmp << endl;
1163 FillRawsData(kGL1V0, iV0Sig, iL1GPatchAmp);
1169 for (Int_t i = 0; i < inSTU->GetNL1JetPatch(0); i++)
1171 if (inSTU->GetL1JetPatch(i, 0, x, y)) // col (0,15), row (0,11)
1174 Int_t etaJ = sizeL1jsubr * (11-y-sizeL1jpatch + 1);
1175 Int_t phiJ = sizeL1jsubr * (15-x-sizeL1jpatch + 1);
1177 //position of patch L1J (FOR bottom-left)
1178 FillRawsData(kJL1, etaJ, phiJ);
1180 //loop the sum aplitude of FOR in the jet patch
1181 Int_t iL1JPatchAmp = 0;
1182 for (Int_t L1Jx = 0; L1Jx < sizeL1jpatch*4; L1Jx ++)
1184 for (Int_t L1Jy = 0; L1Jy < sizeL1jpatch*4; L1Jy ++)
1186 if (etaJ+L1Jx < 48 && phiJ+L1Jy < 64) iL1JPatchAmp += iEMCALtrig[etaJ+L1Jx][phiJ+L1Jy];
1190 //cout << "L1J amp =" << iL1JPatchAmp << endl;
1191 FillRawsData(kJL1V0, iV0Sig, iL1JPatchAmp);
1196 //Fill FOR amplitude histo
1197 for (Int_t i = 0; i < 48; i++)
1199 for (Int_t j = 0; j < 60; j++)
1201 if (iEMCALtrig[i][j] != 0) FillRawsData(kAmpL1, i, j, iEMCALtrig[i][j]);