1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
18 /////////////////////////////////////////////////////////////////////
20 // Forward Multiplicity detector based on Silicon version 0 //
24 <img src="gif/AliFMDv0Class.gif">
29 //////////////////////////////////////////////////////////////////////
31 #include <Riostream.h>
34 #include <TGeometry.h>
35 #include <TLorentzVector.h>
39 #include <TLorentzVector.h>
45 #include "AliFMDhit.h"
49 //--------------------------------------------------------------------
50 AliFMDv0::AliFMDv0(const char *name, const char *title):
54 // Standart constructor for Forward Multiplicity Detector version 0
61 // setBufferSize(128000);
63 //-------------------------------------------------------------------------
65 void AliFMDv0::CreateGeometry()
68 // Create the geometry of Forward Multiplicity Detector version 0
70 //Detector consists of 6 volumes:
71 // 1st covered pseudorapidity interval from 3.3 to 2.0
72 // and placed on 65cm in Z-direction;
73 // 2nd - from 2.0 to 1.6 and Z=85 cm;
74 // 3d - the same pseudorapidity interval as the 1st
75 // but on the other side from the interaction point z=-65cm;
76 // 4th - simmetricaly with the 2nd :
77 // pseudorapidity from 2.0 to 1.6, Z=-85cm
78 // 5th - from 3.6 to 4.7, Z=-270cm
79 // 6th - from 4.5 to 5.5 , Z=-630cm.
80 // Each part has 400mkm Si (sensetive area, detector itself),
81 // 0.75cm of plastic simulated electronics material,
82 // Al support ring 2cm thickness and 1cm width placed on
83 // the outer radius of each Si disk;
87 <img src="gif/AliFMDv0.gif">
93 Int_t *idtmed = fIdtmed->GetArray();
97 Float_t zFMD,par[3],ppcon[15];
98 Float_t z[5]={-62.8, -75.2, 83.4, 75.2, 340.};
99 Float_t NylonTube[3]={0.2,0.6,0.45};
100 Float_t zPCB=0.12; Float_t zHoneyComb=0.5;
103 char nameFMD[5], nameSi[5], nameSector[5], nameRing[5];
104 Char_t nameHoney[5], nameHoneyIn[5], nameHoneyOut[5];
105 Char_t namePCB[5], nameCopper[5], nameChips[5], nameG10[5];
106 Char_t nameLPCB[5], nameLCopper[5], nameLChips[5], nameGL10[5];;
107 Float_t rin[5]={4.2,15.4,4.2,15.4,4.2};
108 Float_t rout[5]={17.4,28.4,17.4,28.4,17.4};
109 Float_t RinHoneyComb[5] ={ 5.15,16.4, 5.15,16.4, 5.15};
110 Float_t RoutHoneyComb[5]={20.63,34.92,22.3, 32.02,20.63};
112 Float_t zCooper=0.01; Float_t zChips=0.01;
113 Float_t yNylonTube[5]={10,20,10,20,10};
116 AliMatrix(idrotm[901], 90, 0, 90, 90, 180, 0);
120 gMC->Gsvolu("GNYL","TUBE", idtmed[1], NylonTube, 3); //support nylon tube
121 Float_t wideSupport=zSi+3*zPCB+2*NylonTube[2]+zHoneyComb;
122 cout<<" wideSupport "<<wideSupport<<endl;
124 for (ifmd=0; ifmd<5; ifmd++)
126 sprintf(nameFMD,"FMD%d",ifmd+1);
131 ppcon[3]=-wideSupport;
132 ppcon[4]=rin[ifmd]+0.1;
133 ppcon[5]=rout[ifmd]+0.1;
135 ppcon[6]=ppcon[3]+2*zSi+2*zPCB+2*NylonTube[2];
136 ppcon[7]=rin[ifmd]+0.1;
137 ppcon[8]=rout[ifmd]+0.1;
140 ppcon[10]=RinHoneyComb[ifmd]+0.1;
141 ppcon[11]=RoutHoneyComb[ifmd]+0.1;
143 ppcon[12]=ppcon[9]+2*zHoneyComb+zPCB;
144 ppcon[13]=RinHoneyComb[ifmd]+0.1;
145 ppcon[14]=RoutHoneyComb[ifmd]+0.1;
146 gMC->Gsvolu(nameFMD,"PCON",idtmed[0],ppcon,15);
148 zFMD=z[ifmd]+wideSupport;
149 gMC->Gspos(nameFMD,1,"ALIC",0,0,zFMD,0, "ONLY");}
151 zFMD=z[ifmd]-wideSupport;
152 gMC->Gspos(nameFMD,1,"ALIC",0,0,zFMD,idrotm[901], "ONLY");}
154 sprintf(nameSi,"GSI%d",ifmd+1);
155 sprintf(nameSector,"GSC%d",ifmd+1);
156 sprintf(nameRing,"GRN%d",ifmd+1);
159 sprintf(nameHoney,"GSU%d",ifmd+1);
160 gMC->Gsvolu(nameHoney,"TUBE", idtmed[0], par, 0); //honeycomb
161 sprintf(nameHoneyIn,"GHI%d",ifmd+1);
162 gMC->Gsvolu(nameHoneyIn,"TUBE", idtmed[7], par, 0); //honey comb inside
163 sprintf(nameHoneyOut,"GHO%d",ifmd+1);
164 gMC->Gsvolu(nameHoneyOut,"TUBE", idtmed[6], par, 0); //honey comb skin
166 sprintf(namePCB,"GPC%d",ifmd+1);
167 gMC->Gsvolu(namePCB,"TUBE", idtmed[0], par, 0); //PCB
168 sprintf(nameCopper,"GCO%d",ifmd+1);
169 gMC->Gsvolu(nameCopper,"TUBE", idtmed[3], par, 0); // Cooper
170 sprintf(nameChips,"GCH%d",ifmd+1);
171 gMC->Gsvolu(nameChips,"TUBE", idtmed[5], par, 0); // Si chips
172 sprintf(nameG10,"G10%d",ifmd+1);
173 gMC->Gsvolu(nameG10,"TUBE", idtmed[2], par, 0); //G10 plate
175 sprintf(nameLPCB,"GPL%d",ifmd+1);
176 gMC->Gsvolu(nameLPCB,"TUBE", idtmed[0], par, 0); //PCB
177 sprintf(nameLCopper,"GCL%d",ifmd+1);
178 gMC->Gsvolu(nameLCopper,"TUBE", idtmed[3], par, 0); // Cooper
179 sprintf(nameLChips,"GHL%d",ifmd+1);
180 gMC->Gsvolu(nameLChips,"TUBE", idtmed[5], par, 0); // Si chips
181 sprintf(nameGL10,"G1L%d",ifmd+1);
182 gMC->Gsvolu(nameGL10,"TUBE", idtmed[2], par, 0); // Last G10
183 par[0]=rin[ifmd]; // pipe size
186 gMC->Gsvolu(nameSi,"TUBE", idtmed[4], par, 3);
187 zInside=ppcon[3]+par[2];
188 gMC->Gspos(nameSi,ifmd+1,nameFMD,0,0,zInside,0, "ONLY");
190 zInside += par[2]+zPCB/2;
192 gMC->Gsposp(namePCB,1,nameFMD,0,0,zInside,0, "ONLY",par,3);
194 gMC->Gsposp(namePCB,2,nameFMD,0,0,zInside,0, "ONLY",par,3);
195 Float_t NulonTubeBegin=zInside+2.5*zPCB;
197 Float_t zInPCB = -zPCB/2+par[2];
198 gMC->Gsposp(nameG10,1,namePCB,0,0,zInPCB,0, "ONLY",par,3);
199 zInPCB+=par[2]+zCooper/2 ;
201 gMC->Gsposp(nameCopper,1,namePCB,0,0,zInPCB,0, "ONLY",par,3);
202 zInPCB += zCooper/2 + zChips/2;
204 gMC->Gsposp(nameChips,1,namePCB,0,0,zInPCB,0, "ONLY",par,3);
207 par[0] = RinHoneyComb[ifmd];
208 par[1] = RoutHoneyComb[ifmd];
209 par[2] = zHoneyComb/2;
210 zInside += 2*NylonTube[2]+par[2];
211 gMC->Gsposp(nameHoney,1,nameFMD,0,0,zInside,0, "ONLY",par,3);
213 Float_t zHoney=-zHoneyComb/2+par[2];
214 gMC->Gsposp(nameHoneyOut,1,nameHoney,0,0,zHoney,0,
215 "ONLY",par,3); //shkurki
216 zHoney=zHoneyComb/2-par[2];
217 gMC->Gsposp(nameHoneyOut,2,nameHoney,0,0,zHoney,0, "ONLY",par,3);
218 par[2]=(zHoneyComb-2.*0.1)/2; //soty vnutri
219 gMC->Gsposp(nameHoneyIn,1,nameHoney,0,0,0,0, "ONLY",par,3);
221 gMC->Gspos("GNYL",1,nameFMD,0,yNylonTube[ifmd],
222 NulonTubeBegin+NylonTube[2]/2.,0, "ONLY");
223 gMC->Gspos("GNYL",2,nameFMD,0,-yNylonTube[ifmd],
224 NulonTubeBegin+NylonTube[2]/2.,0, "ONLY");
227 par[0]=RoutHoneyComb[ifmd]-9;
228 par[1]=RoutHoneyComb[ifmd];
230 zInside += zHoneyComb/2+par[2];
231 gMC->Gsposp(nameLPCB,1,nameFMD,0,0,zInside,0, "ONLY",par,3);
234 zInPCB = -zPCB/2+par[2];
235 gMC->Gsposp(nameGL10,1,nameLPCB,0,0,zInPCB,0, "ONLY",par,3);
236 zInPCB+=par[2]+zCooper/2 ;
238 gMC->Gsposp(nameLCopper,1,nameLPCB,0,0,zInPCB,0, "ONLY",par,3);
239 zInPCB += zCooper/2 + zChips/2;
241 gMC->Gsposp(nameLChips,1,nameLPCB,0,0,zInPCB,0, "ONLY",par,3);
247 // fRingsSi1=3; // for drawing only
250 // fRingsSi2=3; //for drawing onl
253 gMC->Gsdvn(nameSector, nameSi , fSectorsSi2, 2);
254 gMC->Gsdvn(nameRing, nameSector, fRingsSi2, 1);
258 gMC->Gsdvn(nameSector, nameSi , fSectorsSi1, 2);
259 gMC->Gsdvn(nameRing, nameSector , fRingsSi1, 1);
266 //------------------------------------------------------------------------
267 void AliFMDv0::CreateMaterials()
269 Int_t isxfld = gAlice->Field()->Integ();
270 Float_t sxmgmx = gAlice->Field()->Max();
273 Float_t aPlastic[2]={1.01,12.01};
274 Float_t zPlastic[2]={1,6};
275 Float_t wPlastic[2]={1,1};
276 Float_t denPlastic=1.03;
278 // 60% SiO2 , 40% G10FR4
280 Float_t apcb[3] = { 28.0855,15.9994,17.749 };
281 Float_t zpcb[3] = { 14.,8.,8.875 };
282 Float_t wpcb[3] = { .28,.32,.4 };
283 Float_t denspcb = 1.8;
285 //*** Definition Of avaible FMD materials ***
286 AliMaterial(0, "FMD Air$", 14.61, 7.3, .001205, 30423.,999);
287 AliMixture(1, "Plastic$",aPlastic,zPlastic,denPlastic,-2,wPlastic);
288 AliMixture(2, "SSD PCB$", apcb, zpcb, denspcb, 3, wpcb);
289 AliMaterial(3, "SSD Copper$", 63.546, 29., 8.96, 1.43, 999.);
290 AliMaterial(4, "SSD Si$", 28.0855, 14., 2.33, 9.36, 999.);
291 AliMaterial(5, "SSD Si chip$", 28.0855, 14., 2.33, 9.36, 999.);
292 AliMaterial(6, "SSD C$", 12.011, 6., 2.265,18.8, 999.);
293 AliMaterial(7, "SSD Kapton$", 12.011, 6., 0.01, 31.27, 999.);//honeycomb
294 AliMaterial(8, "SSD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.);
298 AliMedium(0, "FMD air$", 0, 0, isxfld, sxmgmx, 1., .001, 1., .001, .001);
299 AliMedium(1, "Plastic$", 1, 0,isxfld, sxmgmx, 10., .01, 1., .003, .003);
300 AliMedium(2, "SSD PCB$", 2, 0, isxfld, sxmgmx, 1., .001, 1., .001, .001);
301 AliMedium(3, "SSD Copper$", 3, 0,isxfld, sxmgmx, 10., .01, 1., .003, .003);
302 AliMedium(4, "SSD Si$", 4, 1, isxfld, sxmgmx, 1., .001, 1., .001, .001);
303 AliMedium(5, "SSD Si chip$", 5, 0,isxfld, sxmgmx, 10., .01, 1., .003, .003);
304 AliMedium(6, "SSD C$", 6, 0,isxfld, sxmgmx, 10., .01, 1., .003, .003);
305 AliMedium(7, "SSD Kapton$", 7, 0, isxfld, sxmgmx, 1., .001, 1., .001, .001);
306 AliMedium(8, "SSD G10FR4$", 8, 0,isxfld, sxmgmx, 10., .01, 1., .003, .003);
311 //---------------------------------------------------------------------
312 void AliFMDv0::DrawDetector()
315 // Draw a shaded view of the Forward multiplicity detector version 0
319 //Set ALIC mother transparent
320 gMC->Gsatt("ALIC","SEEN",0);
322 //Set volumes visible
323 gMC->Gsatt("FMD0","SEEN",1);
324 gMC->Gsatt("FMD1","SEEN",1);
325 gMC->Gsatt("FMD2","SEEN",1);
326 gMC->Gsatt("FMD3","SEEN",1);
327 gMC->Gsatt("FMD4","SEEN",1);
328 gMC->Gsatt("FMD5","SEEN",1);
331 gMC->Gdopt("hide","on");
332 gMC->Gdopt("shad","on");
333 gMC->SetClipBox(".");
334 gMC->SetClipBox("*",0,1000,-1000,1000,-1000,1000);
336 gMC->Gdraw("alic",40,30,0,12,9.5,.2,0.2);
337 gMC->Gdhead(1111,"Forward multiplicity detector");
338 gMC->Gdopt("hide","off");
340 //-------------------------------------------------------------------
341 void AliFMDv0::Init()
343 // Initialises version 0 of the Forward Multiplicity Detector
346 fIdSens1=gMC->VolId("GRN1");
347 fIdSens2=gMC->VolId("GRN2");
348 fIdSens3=gMC->VolId("GRN3");
349 fIdSens4=gMC->VolId("GRN4");
350 fIdSens5=gMC->VolId("GRN5");
351 if (fDebug) printf("*** FMD version 0 initialized ***\n");
354 //-------------------------------------------------------------------
356 void AliFMDv0::StepManager()
359 // Called for every step in the Forward Multiplicity Detector