1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
16 //************************************************************************
17 // Inner Traking System geometry v11
19 // Based on ROOT geometrical modeler
21 // B. Nilsen, L. Gaudichet
22 //************************************************************************
25 //#include <Riostream.h>
26 #include <TClonesArray.h>
27 #include <TLorentzVector.h>
30 #include "AliITSDetTypeSim.h"
31 #include "AliITSGeant3Geometry.h"
32 #include "AliITSgeom.h"
33 #include "AliITSgeomSDD.h"
34 #include "AliITSgeomSPD.h"
35 #include "AliITSgeomSSD.h"
36 #include "AliITShit.h"
38 #include "AliITSCalibrationSDD.h"
39 #include "AliITSCalibrationSPD.h"
40 #include "AliITSCalibrationSSD.h"
42 #include "AliITSsegmentationSDD.h"
43 #include "AliITSsegmentationSPD.h"
44 #include "AliITSsegmentationSSD.h"
45 #include "AliITSv11.h"
48 #include "AliTrackReference.h"
51 #include <TGeoManager.h>
52 #include <TGeoVolume.h>
54 //#include "AliITSv11GeometrySPD.h"
55 #include "AliITSv11GeometrySDD.h"
56 //#include "AliITSv11GeometrySupport.h"
64 //______________________________________________________________________
65 AliITSv11::AliITSv11() : AliITS(),
66 fGeomDetOut(kFALSE), // Don't write .det file
67 fGeomDetIn(kTRUE), // Read .det file
73 // Standard default constructor for the ITS version 11.
78 fEuclidOut = kFALSE; // Don't write Euclide file
80 for(i=0;i<60;i++) fRead[i] = '\0';
81 for(i=0;i<60;i++) fWrite[i] = '\0';
82 for(i=0;i<60;i++) fEuclidGeomDet[i] = '\0';
83 strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
87 //______________________________________________________________________
88 AliITSv11::AliITSv11(const char *name, const char *title)
89 : AliITS("ITS", title),
90 fGeomDetOut(kFALSE), // Don't write .det file
91 fGeomDetIn(kTRUE), // Read .det file
97 // Standard constructor for the ITS version 11.
99 fSDDgeom = new AliITSv11GeometrySDD(0);
103 fIdName = new TString[fIdN];
104 fIdName[0] = name; // removes warning message
107 fIdName[2] = fSDDgeom->GetSenstiveVolumeMame();
108 fIdName[3] = fSDDgeom->GetSenstiveVolumeMame();
111 fIdSens = new Int_t[fIdN];
112 for(i=0;i<fIdN;i++) fIdSens[i] = 0;
113 fEuclidOut = kFALSE; // Don't write Euclide file
114 //SetDensityServicesByThickness();
115 // not needed, fByThick set to kTRUE in in the member initialization lis
118 fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.euc";
119 strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
120 strncpy(fRead,fEuclidGeomDet,60);
121 strncpy(fWrite,fEuclidGeomDet,60);
122 strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
126 //______________________________________________________________________
127 AliITSv11::AliITSv11(Int_t debugITS,Int_t debugSPD,Int_t debugSDD,
128 Int_t debugSSD,Int_t debugSUP) :
129 AliITS("ITS","ITS geometry v11"),
130 fGeomDetOut(kFALSE), // Don't write .det file
131 fGeomDetIn(kTRUE), // Read .det file
137 // Standard default constructor for the ITS version 11.
140 // fSPDgeom = new AliITSv11GeometrySPD(debugSPD);
141 fSDDgeom = new AliITSv11GeometrySDD(debugSDD);
142 fSDDgeom->SetDebug(debugSDD);
143 // fSupgeom = new AliITSv11GeometrySupport(debugSUP);
147 fIdName = new TString[fIdN];
150 fIdName[2] = fSDDgeom->GetSenstiveVolumeMame();
151 fIdName[3] = fSDDgeom->GetSenstiveVolumeMame();
154 fIdSens = new Int_t[fIdN];
155 for(i=0;i<fIdN;i++) fIdSens[i] = 0;
156 fEuclidOut = kFALSE; // Don't write Euclide file
157 //SetDensityServicesByThickness();
159 fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.euc";
160 strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
161 strncpy(fRead,fEuclidGeomDet,60);
162 strncpy(fWrite,fEuclidGeomDet,60);
163 strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
165 debugITS = (debugSPD && debugSSD && debugSUP && debugSDD); //remove temp. warnings
169 //______________________________________________________________________
170 AliITSv11::AliITSv11(const AliITSv11 &source) :
172 fGeomDetOut(kFALSE), // Don't write .det file
173 fGeomDetIn(kTRUE), // Read .det file
179 // Copy Constructor for ITS version 11. This function is not to be
180 // used. If any other instance of this function, other than "this" is
181 // passed, an error message is returned.
183 // const AliITSv11 &source This class
185 if(&source == this) return;
186 Warning("Copy Constructor","Not allowed to copy AliITSv11");
191 //______________________________________________________________________
192 AliITSv11& AliITSv11::operator=(const AliITSv11
194 // Assignment operator for the ITS version 11. This function is not
195 // to be used. If any other instance of this function, other than "this"
196 // is passed, an error message is returned.
198 // const AliITSv11 &source This class
200 if(&source == this) return *this;
201 Warning("= operator","Not allowed to copy AliITSv11");
206 //______________________________________________________________________
207 AliITSv11::~AliITSv11() {
212 //______________________________________________________________________
213 void AliITSv11::BuildGeometry(){
218 //______________________________________________________________________
219 void AliITSv11::CreateGeometry(){
221 // Create ROOT geometry
224 TGeoManager *geoManager = gGeoManager;
225 TGeoVolume *vALIC = geoManager->GetTopVolume();
227 TGeoPcon *sITS = new TGeoPcon("ITS Top Volume",0.0,360.0,2);
229 // DefineSection(section number, Z, Rmin, Rmax).
230 const Double_t kcm = 1.0;
231 sITS->DefineSection(0,-300.0*kcm,0.01*kcm,50.0*kcm);
232 sITS->DefineSection(1,+300.0*kcm,0.01*kcm,50.0*kcm);
234 TGeoMedium *air = gGeoManager->GetMedium("ITS_ITSair");
235 TGeoVolume *vITS = new TGeoVolume("vITS",sITS,air);
236 vITS->SetVisibility(kFALSE);
237 vALIC->AddNode(vITS,1,0);
239 // fSPDgeom->CenteralSPD(vITS);
241 fSDDgeom->Layer3(vITS);
242 fSDDgeom->Layer4(vITS);
244 // fSupgeom->SPDCone(vITS);
245 // fSupgeom->SPDThermalSheald(vITS);
246 // fSupgeom->SDDCone(vITS);
247 // fSupgeom->SSDCone(vITS);
248 // fSupgeom->ServicesCableSupport(vITS);
253 //______________________________________________________________________
254 void AliITSv11::CreateMaterials(){
256 // Create ITS materials
257 // Defined media here should correspond to the one defined in galice.cuts
258 // File which is red in (AliMC*) fMCApp::Init() { ReadTransPar(); }
261 // Int_t ifield = gAlice->Field()->Integ();
262 // Float_t fieldm = gAlice->Field()->Max();
264 // Float_t tmaxfd = 0.1; // 1.0; // Degree
265 // Float_t stemax = 1.0; // cm
266 // Float_t deemax = 0.1; // 30.0; // Fraction of particle's energy 0<deemax<=1
267 // Float_t epsil = 1.0E-4; // 1.0; // cm
268 // Float_t stmin = 0.0; // cm "Default value used"
270 // Float_t tmaxfdSi = 0.1; // .10000E+01; // Degree
271 // Float_t stemaxSi = 0.0075; // .10000E+01; // cm
272 // Float_t deemaxSi = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
273 // Float_t epsilSi = 1.0E-4;// .10000E+01;
274 // Float_t stminSi = 0.0; // cm "Default value used"
276 // Float_t tmaxfdAir = 0.1; // .10000E+01; // Degree
277 // Float_t stemaxAir = .10000E+01; // cm
278 // Float_t deemaxAir = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
279 // Float_t epsilAir = 1.0E-4;// .10000E+01;
280 // Float_t stminAir = 0.0; // cm "Default value used"
282 // Float_t tmaxfdServ = 1.0; // 10.0; // Degree
283 // Float_t stemaxServ = 1.0; // 0.01; // cm
284 // Float_t deemaxServ = 0.5; // 0.1; // Fraction of particle's energy 0<deemax<=1
285 // Float_t epsilServ = 1.0E-3; // 0.003; // cm
286 // Float_t stminServ = 0.0; //0.003; // cm "Default value used"
288 // // Freon PerFluorobuthane C4F10 see
289 // // http://st-support-cooling-electronics.web.cern.ch/
290 // // st-support-cooling-electronics/default.htm
291 // Float_t afre[2] = { 12.011,18.9984032 };
292 // Float_t zfre[2] = { 6., 9. };
293 // Float_t wfre[2] = { 4.,10. };
294 // Float_t densfre = 1.52;
298 // Float_t aCM55J[4]={12.0107,14.0067,15.9994,1.00794};
299 // Float_t zCM55J[4]={6.,7.,8.,1.};
300 // Float_t wCM55J[4]={0.908508078,0.010387573,0.055957585,0.025146765};
301 // Float_t dCM55J = 1.63;
304 // Float_t aALCM55J[5]={12.0107,14.0067,15.9994,1.00794,26.981538};
305 // Float_t zALCM55J[5]={6.,7.,8.,1.,13.};
306 // Float_t wALCM55J[5]={0.817657902,0.0093488157,0.0503618265,0.0226320885,0.1};
307 // Float_t dALCM55J = 1.9866;
310 // Float_t aSICHIP[6]={12.0107,14.0067,15.9994,1.00794,28.0855,107.8682};
311 // Float_t zSICHIP[6]={6.,7.,8.,1.,14., 47.};
312 // Float_t wSICHIP[6]={0.039730642,0.001396798,0.01169634,
313 // 0.004367771,0.844665,0.09814344903};
314 // Float_t dSICHIP = 2.36436;
317 // Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,
318 // 58.6928,55.9961,95.94,55.845};
319 // Float_t zINOX[9]={6.,25.,14.,15.,16., 28.,24.,42.,26.};
320 // Float_t wINOX[9]={0.0003,0.02,0.01,0.00045,0.0003,0.12,0.17,0.025,0.654};
321 // Float_t dINOX = 8.03;
323 // //SDD HV microcable
324 // Float_t aHVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
325 // Float_t zHVm[5]={6.,1.,7.,8.,13.};
326 // Float_t wHVm[5]={0.520088819984,0.01983871336,0.0551367996,0.157399667056, 0.247536};
327 // Float_t dHVm = 1.6087;
329 // //SDD LV+signal cable
330 // Float_t aLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
331 // Float_t zLVm[5]={6.,1.,7.,8.,13.};
332 // Float_t wLVm[5]={0.21722436468,0.0082859922,0.023028867,0.06574077612, 0.68572};
333 // Float_t dLVm = 2.1035;
335 // //SDD hybrid microcab
336 // Float_t aHLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
337 // Float_t zHLVm[5]={6.,1.,7.,8.,13.};
338 // Float_t wHLVm[5]={0.24281879711,0.00926228815,0.02574224025,0.07348667449, 0.64869};
339 // Float_t dHLVm = 2.0502;
341 // //SDD anode microcab
342 // Float_t aALVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
343 // Float_t zALVm[5]={6.,1.,7.,8.,13.};
344 // Float_t wALVm[5]={0.392653705471,0.0128595919215,
345 // 0.041626868025,0.118832707289, 0.431909};
346 // Float_t dALVm = 2.0502;
349 // Float_t aX7R[7]={137.327,47.867,15.9994,58.6928,63.5460,118.710,207.2};
350 // Float_t zX7R[7]={56.,22.,8.,28.,29.,50.,82.};
351 // Float_t wX7R[7]={0.251639432,0.084755042,0.085975822,
352 // 0.038244751,0.009471271,0.321736471,0.2081768};
353 // Float_t dX7R = 7.14567;
356 // Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
357 // Float_t zAir[4]={6.,7.,8.,18.};
358 // Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
359 // Float_t dAir = 1.20479E-3;
362 // Float_t aWater[2]={1.00794,15.9994};
363 // Float_t zWater[2]={1.,8.};
364 // Float_t wWater[2]={0.111894,0.888106};
365 // Float_t dWater = 1.0;
368 // // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3
369 // Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 };
370 // Float_t zcer[5] = { 13., 8., 14., 25., 24. };
371 // Float_t wcer[5] = {.4443408,.5213375,.0130872,.0178135,.003421};
372 // Float_t denscer = 3.6;
375 // Float_t zG10FR4[14] = {14.00, 20.00, 13.00, 12.00, 5.00,
376 // 22.00, 11.00, 19.00, 26.00, 9.00,
377 // 8.00, 6.00, 7.00, 1.00};
378 // Float_t aG10FR4[14] = {28.0855000,40.0780000,26.9815380,24.3050000,
379 // 10.8110000,47.8670000,22.9897700,39.0983000,
380 // 55.8450000,18.9984000,15.9994000,12.0107000,
381 // 14.0067000,1.0079400};
382 // Float_t wG10FR4[14] = {0.15144894,0.08147477,0.04128158,0.00904554,
383 // 0.01397570,0.00287685,0.00445114,0.00498089,
384 // 0.00209828,0.00420000,0.36043788,0.27529426,
385 // 0.01415852,0.03427566};
386 // Float_t densG10FR4= 1.8;
388 // //--- EPOXY --- C18 H19 O3
389 // Float_t aEpoxy[3] = {15.9994, 1.00794, 12.0107} ;
390 // Float_t zEpoxy[3] = { 8., 1., 6.} ;
391 // Float_t wEpoxy[3] = { 3., 19., 18.} ;
392 // Float_t dEpoxy = 1.8 ;
394 // // rohacell: C9 H13 N1 O2
395 // Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
396 // Float_t zrohac[4] = { 6., 1., 7., 8.};
397 // Float_t wrohac[4] = { 9., 13., 1., 2.};
398 // Float_t drohac = 0.05;
400 // // If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then
402 // // %Al=81.6164 %inox=100-%Al
404 // Float_t aInAl[5] = {27., 55.847,51.9961,58.6934,28.0855 };
405 // Float_t zInAl[5] = {13., 26.,24.,28.,14. };
406 // Float_t wInAl[5] = {.816164, .131443,.0330906,.0183836,.000919182};
407 // Float_t dInAl = 3.075;
410 // Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
411 // Float_t zKapton[4]={1.,6.,7.,8.};
412 // Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
413 // Float_t dKapton = 1.42;
416 // Float_t aAlOxide[2] = { 26.981539,15.9994};
417 // Float_t zAlOxide[2] = { 13., 8.};
418 // Float_t wAlOxide[2] = {0.4707, 0.5293};
419 // Float_t dAlOxide = 3.97;
422 // AliMaterial(1,"ITSsddSi",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
423 // AliMedium(1,"ITSsddSi",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
425 // AliMixture(5,"ITSair",aAir,zAir,dAir,4,wAir);
426 // AliMedium(5,"ITSair",5,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
428 // AliMixture(7,"ITSsddSiChip",aSICHIP,zSICHIP,dSICHIP,6,wSICHIP);
429 // AliMedium(7,"ITSsddSiChip",7,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
431 // AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
432 // AliMedium(79,"SDD SI insensitive$",79,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
434 // AliMaterial(11,"ITSal",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
435 // AliMedium(11,"ITSal",11,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
437 // AliMixture(9,"ITSsddCarbonM55J",aCM55J,zCM55J,dCM55J,4,wCM55J);
438 // AliMedium(9,"ITSsddCarbonM55J",9,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
440 // AliMixture(10,"SDD AIR$",aAir,zAir,dAir,4,wAir);
441 // AliMedium(10,"SDD AIR$",10,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
443 // AliMixture(12, "WATER",aWater,zWater,dWater,2,wWater);
444 // AliMedium(12,"WATER",12,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
446 // AliMixture(69,"ITSsddCAlM55J",aALCM55J,zALCM55J,dALCM55J,5,wALCM55J);
447 // AliMedium(69,"ITSsddCAlM55J",69,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
449 // AliMixture(70, "ITSsddKAPTON_POLYCH2", aKapton, zKapton, dKapton, 4, wKapton);
450 // AliMedium(70,"ITSsddKAPTON_POLYCH2",70,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
452 // AliMixture(77,"SDDX7Rcapacitors",aX7R,zX7R,dX7R,7,wX7R);
453 // AliMedium(77,"SDDX7Rcapacitors",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
455 // AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide);
456 // AliMedium(78,"SDD ruby sph. Al2O3$",78,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
459 // AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
460 // AliMedium(64,"ALUMINUM$",64,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
462 // AliMaterial(14,"COPPER",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
463 // AliMedium(14,"COPPER",14,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
465 // AliMaterial(2,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
466 // AliMedium(2,"SPD SI CHIP$",2,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
468 // AliMaterial(3,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
469 // AliMedium(3,"SPD SI BUS$",3,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
471 // AliMixture(4,"C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
472 // AliMedium(4,"C (M55J)$",4,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
475 // AliMixture(6,"GEN AIR$",aAir,zAir,dAir,4,wAir);
476 // AliMedium(6,"GEN AIR$",6,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
478 // AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre);
479 // AliMedium(13,"Freon$",13,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
482 // AliMixture(15,"CERAMICS$",acer,zcer,denscer,5,wcer);
483 // AliMedium(15,"CERAMICS$",15,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
485 // AliMixture(20,"SSD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
486 // AliMedium(20,"SSD C (M55J)$",20,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
488 // AliMixture(21,"SSD AIR$",aAir,zAir,dAir,4,wAir);
489 // AliMedium(21,"SSD AIR$",21,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
491 // AliMixture(25,"G10FR4$",aG10FR4,zG10FR4,densG10FR4,14,wG10FR4);
492 // AliMedium(25,"G10FR4$",25,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
494 // AliMixture(26,"GEN C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
495 // AliMedium(26,"GEN C (M55J)$",26,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
497 // AliMixture(27,"GEN Air$",aAir,zAir,dAir,4,wAir);
498 // AliMedium(27,"GEN Air$",27,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
500 // AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
501 // AliMedium(51,"SPD SI$",51,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
503 // AliMaterial(52,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
504 // AliMedium(52,"SPD SI CHIP$",52,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
506 // AliMaterial(53,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
507 // AliMedium(53,"SPD SI BUS$",53,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
509 // AliMixture(54,"SPD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
510 // AliMedium(54,"SPD C (M55J)$",54,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
512 // AliMixture(55,"SPD AIR$",aAir,zAir,dAir,4,wAir);
513 // AliMedium(55,"SPD AIR$",55,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
515 // AliMixture(56, "SPD KAPTON(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
516 // AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
518 // AliMixture(61,"EPOXY$",aEpoxy,zEpoxy,dEpoxy,-3,wEpoxy);
519 // AliMedium(61,"EPOXY$",61,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
521 // AliMaterial(62,"SILICON$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
522 // AliMedium(62,"SILICON$",62,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
524 // AliMixture(63, "KAPTONH(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
525 // AliMedium(63,"KAPTONH(POLYCH2)$",63,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
528 // AliMixture(65,"INOX$",aINOX,zINOX,dINOX,9,wINOX);
529 // AliMedium(65,"INOX$",65,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
531 // AliMixture(68,"ROHACELL$",arohac,zrohac,drohac,-4,wrohac);
532 // AliMedium(68,"ROHACELL$",68,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
535 // AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
536 // AliMedium(71,"ITS SANDW A$",71,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
538 // AliMaterial(72,"ITS SANDW B$",0.12011E+02,0.60000E+01,0.27000E+00,0.18956E+03,0.99900E+03);
539 // AliMedium(72,"ITS SANDW B$",72,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
541 // AliMaterial(73,"ITS SANDW C$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
542 // AliMedium(73,"ITS SANDW C$",73,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
544 // AliMaterial(74,"HEAT COND GLUE$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
545 // AliMedium(74,"HEAT COND GLUE$",74,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
547 // AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
548 // AliMedium(75,"ELASTO SIL$",75,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
550 // AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
551 // AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
554 // AliMixture(80,"SDD HV microcable$",aHVm,zHVm,dHVm,5,wHVm);
555 // AliMedium(80,"SDD HV microcable$",80,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
557 // AliMixture(81,"SDD LV+signal cable$",aLVm,zLVm,dLVm,5,wLVm);
558 // AliMedium(81,"SDD LV+signal cable$",81,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
560 // AliMixture(82,"SDD hybrid microcab$",aHLVm, zHLVm,dHLVm,5,wHLVm);
561 // AliMedium(82,"SDD hybrid microcab$",82,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
563 // AliMixture(83,"SDD anode microcab$",aALVm,zALVm,dALVm,5,wALVm);
564 // AliMedium(83,"SDD anode microcab$",83,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
566 // AliMaterial(84,"SDD/SSD rings$",0.123565E+02,0.64561E+01,0.18097E+01,0.229570E+02,0.99900E+03);
567 // AliMedium(84,"SDD/SSD rings$",84,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
569 // AliMixture(85,"inox/alum$",aInAl,zInAl,dInAl,5,wInAl);
570 // AliMedium(85,"inox/alum$",85,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
573 // // special media to take into account services in the SDD and SSD
574 // // cones for the FMD
576 // Float_t aA[13],zZ[13],wW[13],den;
577 // // From Pierluigi Barberis calculations of 2SPD+1SDD October 2 2002.
578 // zZ[0] = 1.0; aA[0] = 1.00794; // Hydrogen
579 // zZ[1] = 6.0; aA[1] = 12.011; // Carbon
580 // zZ[2] = 7.0; aA[2] = 14.00674; // Nitrogen
581 // zZ[3] = 8.0; aA[3] = 15.9994; // Oxigen
582 // zZ[4] = 14.0; aA[4] = 28.0855; // Silicon
583 // zZ[5] = 24.0; aA[5] = 51.9961; //Cromium
584 // zZ[6] = 25.0; aA[6] = 54.938049; // Manganese
585 // zZ[7] = 26.0; aA[7] = 55.845; // Iron
586 // zZ[8] = 28.0; aA[8] = 58.6934; // Nickle
587 // zZ[9] = 29.0; aA[9] = 63.546; // Copper
588 // zZ[10] = 13.0; aA[10] = 26.981539; // Alulminum
589 // zZ[11] = 47.0; aA[11] = 107.8682; // Silver
590 // zZ[12] = 27.0; aA[12] = 58.9332; // Cobolt
601 // wW[10] = 0.008121;
602 // wW[11] = 0.000000;
603 // wW[12] = 0.000000;
604 // if(fByThick){// New values seeITS_MatBudget_4B.xls
605 // den = 1.5253276; // g/cm^3 Cell O370
607 // den = 2.58423412; // g/cm^3 Cell L370
608 // } // end if fByThick
609 // //den = 6161.7/(3671.58978);//g/cm^3 Volume does not exclude holes
610 // AliMixture(86,"AIRFMDSDD$",aA,zZ,den,+11,wW);
611 // AliMedium(86,"AIRFMDSDD$",86,0,ifield,fieldm,tmaxfdAir,stemaxAir,
612 // deemaxAir,epsilAir,stminAir);
625 // wW[10] = 0.014546;
626 // wW[11] = 0.005213;
627 // wW[12] = 0.000000;
628 // if(fByThick){// New values seeITS_MatBudget_4B.xls
629 // den = 1.2464275; // g/cm^3 Cell O403
631 // den = 1.28134409; // g/cm^3 Cell L403
632 // } // end if fByThick
633 // //den = 7666.3/(9753.553259); // volume does not exclude holes
634 // AliMixture(87,"AIRFMDSSD$",aA,zZ,den,+12,wW);
635 // AliMedium(87,"AIRFMDSSD$",87,0,ifield,fieldm,tmaxfdAir,stemaxAir,
636 // deemaxAir,epsilAir,stminAir);
648 // wW[10] = 0.006631;
649 // wW[11] = 0.000000;
650 // wW[12] = 0.000000;
651 // if(fByThick){// New values seeITS_MatBudget_4B.xls
652 // den = 1.9353276; // g/cm^3 Cell N370
654 // den = 3.2788626; // g/cm^3 Cell F370
655 // } // end if fByThick
656 // //den = 7667.1/(3671.58978); // Volume does not excludeholes
657 // AliMixture(88,"ITS SANDW CFMDSDD$",aA,zZ,den,+11,wW);
658 // AliMedium(88,"ITS SANDW CFMDSDD$",88,0,ifield,fieldm,tmaxfd,stemax,
659 // deemax,epsil,stmin);
671 // wW[10] = 0.010345;
672 // wW[11] = 0.0003707;
673 // wW[12] = 0.000000;
674 // if(fByThick){// New values seeITS_MatBudget_4B.xls
675 // den = 1.6564275; // g/cm^3 Cell N304
677 // den = 1.7028296; // g/cm^3 Cell F304
678 // } // end if fByThick
679 // //den = 1166.5/(3671.58978); // Volume does not exclude holes
680 // AliMixture(89,"ITS SANDW CFMDSSD$",aA,zZ,den,+12,wW);
681 // AliMedium(89,"ITS SANDW CFMDSSD$",89,0,ifield,fieldm,tmaxfd,stemax,
682 // deemax,epsil,stmin);
694 // wW[10] = 0.000000;
695 // wW[11] = 0.000000;
696 // wW[12] = 0.000000;
697 // if(fByThick){// New values seeITS_MatBudget_4B.xls
698 // den = 80.31136576; // g/cm^3 Cell H329
700 // den = 87.13062; // g/cm^3 Cell G329
701 // } // end if fByThick
702 // //den = 1251.3/(0.05*2.0*TMath::Pi()*(7.75*7.75 - 3.7*3.7)); // g/cm^3
703 // AliMixture(97,"SPD SERVICES$",aA,zZ,den,+10,wW);
704 // AliMedium(97,"SPD SERVICES$",97,0,ifield,fieldm,tmaxfd,stemax,
705 // deemax,epsil,stmin);
709 // AliMaterial(90,"SPD shield$", 12.011, 6., 1.93/10. , 22.1*10., 999);
710 // AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,
711 // deemaxServ,epsilServ,stminServ);
713 // AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
714 // AliMedium(91,"SPD End ladder$",91,0,ifield,fieldm,tmaxfdServ,stemaxServ,
715 // deemaxServ,epsilServ,stminServ);
717 // AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
718 // AliMedium(92,"SPD cone$",92,0,ifield,fieldm,tmaxfdServ,stemaxServ,
719 // deemaxServ,epsilServ,stminServ);
721 // // Material with fractional Z not actually used
722 // // AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
723 // // AliMedium(93,"SDD End ladder$",93,0,ifield,fieldm,tmaxfdServ,stemaxServ,
724 // // deemaxServ,epsilServ,stminServ);
726 // AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999);
727 // AliMedium(94,"SDD cone$",94,0,ifield,fieldm,tmaxfdServ,stemaxServ,
728 // deemaxServ,epsilServ,stminServ);
730 // // Material with fractional Z not actually used
731 // // AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
732 // // AliMedium(95,"SSD End ladder$",95,0,ifield,fieldm,tmaxfdServ,stemaxServ,
733 // // deemaxServ,epsilServ,stminServ);
735 // AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
736 // AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,
737 // deemaxServ,epsilServ,stminServ);
740 Int_t ifield = gAlice->Field()->Integ();
741 Float_t fieldm = gAlice->Field()->Max();
743 Float_t tmaxfd = 0.1; // 1.0; // Degree
744 Float_t stemax = 1.0; // cm
745 Float_t deemax = 0.1; // 30.0; // Fraction of particle's energy 0<deemax<=1
746 Float_t epsil = 1.0E-4; // 1.0; // cm
747 Float_t stmin = 0.0; // cm "Default value used"
749 Float_t tmaxfdSi = 0.1; // .10000E+01; // Degree
750 Float_t stemaxSi = 0.0075; // .10000E+01; // cm
751 Float_t deemaxSi = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
752 Float_t epsilSi = 1.0E-4;// .10000E+01;
753 Float_t stminSi = 0.0; // cm "Default value used"
755 Float_t tmaxfdAir = 0.1; // .10000E+01; // Degree
756 Float_t stemaxAir = .10000E+01; // cm
757 Float_t deemaxAir = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
758 Float_t epsilAir = 1.0E-4;// .10000E+01;
759 Float_t stminAir = 0.0; // cm "Default value used"
761 Float_t tmaxfdServ = 1.0; // 10.0; // Degree
762 Float_t stemaxServ = 1.0; // 0.01; // cm
763 Float_t deemaxServ = 0.5; // 0.1; // Fraction of particle's energy 0<deemax<=1
764 Float_t epsilServ = 1.0E-3; // 0.003; // cm
765 Float_t stminServ = 0.0; //0.003; // cm "Default value used"
767 // Freon PerFluorobuthane C4F10 see
768 // http://st-support-cooling-electronics.web.cern.ch/
769 // st-support-cooling-electronics/default.htm
770 Float_t afre[2] = { 12.011,18.9984032 };
771 Float_t zfre[2] = { 6., 9. };
772 Float_t wfre[2] = { 4.,10. };
773 Float_t densfre = 1.52;
778 Float_t aCM55J[4]={12.0107,14.0067,15.9994,1.00794};
779 Float_t zCM55J[4]={6.,7.,8.,1.};
780 Float_t wCM55J[4]={0.908508078,0.010387573,0.055957585,0.025146765};
781 Float_t dCM55J = 1.63;
785 Float_t aALCM55J[5]={12.0107,14.0067,15.9994,1.00794,26.981538};
786 Float_t zALCM55J[5]={6.,7.,8.,1.,13.};
787 Float_t wALCM55J[5]={0.817657902,0.0093488157,0.0503618265,0.0226320885,0.1};
788 Float_t dALCM55J = 1.9866;
792 Float_t aSICHIP[6]={12.0107,14.0067,15.9994,1.00794,28.0855,107.8682};
793 Float_t zSICHIP[6]={6.,7.,8.,1.,14., 47.};
794 Float_t wSICHIP[6]={0.039730642,0.001396798,0.01169634,0.004367771,0.844665,0.09814344903};
795 Float_t dSICHIP = 2.36436;
799 Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,55.9961,95.94,55.845};
800 Float_t zINOX[9]={6.,25.,14.,15.,16., 28.,24.,42.,26.};
801 Float_t wINOX[9]={0.0003,0.02,0.01,0.00045,0.0003,0.12,0.17,0.025,0.654};
802 Float_t dINOX = 8.03;
806 Float_t aHVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
807 Float_t zHVm[5]={6.,1.,7.,8.,13.};
808 Float_t wHVm[5]={0.520088819984,0.01983871336,0.0551367996,0.157399667056, 0.247536};
809 Float_t dHVm = 1.6087;
811 //SDD LV+signal cable
813 Float_t aLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
814 Float_t zLVm[5]={6.,1.,7.,8.,13.};
815 Float_t wLVm[5]={0.21722436468,0.0082859922,0.023028867,0.06574077612, 0.68572};
816 Float_t dLVm = 2.1035;
818 //SDD hybrid microcab
820 Float_t aHLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
821 Float_t zHLVm[5]={6.,1.,7.,8.,13.};
822 Float_t wHLVm[5]={0.24281879711,0.00926228815,0.02574224025,0.07348667449, 0.64869};
823 Float_t dHLVm = 2.0502;
827 Float_t aALVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
828 Float_t zALVm[5]={6.,1.,7.,8.,13.};
829 Float_t wALVm[5]={0.392653705471,0.0128595919215,0.041626868025,0.118832707289, 0.431909};
830 Float_t dALVm = 2.0502;
834 Float_t aX7R[7]={137.327,47.867,15.9994,58.6928,63.5460,118.710,207.2};
835 Float_t zX7R[7]={56.,22.,8.,28.,29.,50.,82.};
836 Float_t wX7R[7]={0.251639432,0.084755042,0.085975822,0.038244751,0.009471271,0.321736471,0.2081768};
837 Float_t dX7R = 7.14567;
841 Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
842 Float_t zAir[4]={6.,7.,8.,18.};
843 Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
844 Float_t dAir = 1.20479E-3;
848 Float_t aWater[2]={1.00794,15.9994};
849 Float_t zWater[2]={1.,8.};
850 Float_t wWater[2]={0.111894,0.888106};
851 Float_t dWater = 1.0;
854 // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3
855 Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 };
856 Float_t zcer[5] = { 13., 8., 14., 25., 24. };
857 Float_t wcer[5] = {.4443408,.5213375,.0130872,.0178135,.003421};
858 Float_t denscer = 3.6;
862 Float_t zG10FR4[14] = {14.00, 20.00, 13.00, 12.00, 5.00, 22.00, 11.00, 19.00, 26.00, 9.00, 8.00, 6.00, 7.00, 1.00};
863 Float_t aG10FR4[14] = {28.0855000,40.0780000,26.9815380,24.3050000,10.8110000,47.8670000,22.9897700,39.0983000,55.8450000,18.9984000,15.9994000,12.0107000,14.0067000,1.0079400};
864 Float_t wG10FR4[14] = {0.15144894,0.08147477,0.04128158,0.00904554,0.01397570,0.00287685,0.00445114,0.00498089,0.00209828,0.00420000,0.36043788,0.27529426,0.01415852,0.03427566};
865 Float_t densG10FR4= 1.8;
867 //--- EPOXY --- C18 H19 O3
868 Float_t aEpoxy[3] = {15.9994, 1.00794, 12.0107} ;
869 Float_t zEpoxy[3] = { 8., 1., 6.} ;
870 Float_t wEpoxy[3] = { 3., 19., 18.} ;
871 Float_t dEpoxy = 1.8 ;
873 // rohacell: C9 H13 N1 O2
874 Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
875 Float_t zrohac[4] = { 6., 1., 7., 8.};
876 Float_t wrohac[4] = { 9., 13., 1., 2.};
877 Float_t drohac = 0.05;
879 // If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then
881 // %Al=81.6164 %inox=100-%Al
883 Float_t aInAl[5] = {27., 55.847,51.9961,58.6934,28.0855 };
884 Float_t zInAl[5] = {13., 26.,24.,28.,14. };
885 Float_t wInAl[5] = {.816164, .131443,.0330906,.0183836,.000919182};
886 Float_t dInAl = 3.075;
890 Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
891 Float_t zKapton[4]={1.,6.,7.,8.};
892 Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
893 Float_t dKapton = 1.42;
896 Float_t aAlOxide[2] = { 26.981539,15.9994};
897 Float_t zAlOxide[2] = { 13., 8.};
898 Float_t wAlOxide[2] = {0.4707, 0.5293};
899 Float_t dAlOxide = 3.97;
902 AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
903 AliMedium(1,"SI$",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
905 AliMaterial(2,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
906 AliMedium(2,"SPD SI CHIP$",2,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
908 AliMaterial(3,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
909 AliMedium(3,"SPD SI BUS$",3,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
911 AliMixture(4,"C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
912 AliMedium(4,"C (M55J)$",4,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
914 AliMixture(5,"AIR$",aAir,zAir,dAir,4,wAir);
915 AliMedium(5,"AIR$",5,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
917 AliMixture(6,"GEN AIR$",aAir,zAir,dAir,4,wAir);
918 AliMedium(6,"GEN AIR$",6,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
920 AliMixture(7,"SDD SI CHIP$",aSICHIP,zSICHIP,dSICHIP,6,wSICHIP);
921 AliMedium(7,"SDD SI CHIP$",7,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
923 AliMixture(9,"SDD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
924 AliMedium(9,"SDD C (M55J)$",9,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
926 AliMixture(10,"SDD AIR$",aAir,zAir,dAir,4,wAir);
927 AliMedium(10,"SDD AIR$",10,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
929 AliMaterial(11,"AL$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
930 AliMedium(11,"AL$",11,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
932 AliMixture(12, "Water$",aWater,zWater,dWater,2,wWater);
933 AliMedium(12,"WATER$",12,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
935 AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre);
936 AliMedium(13,"Freon$",13,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
938 AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
939 AliMedium(14,"COPPER$",14,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
940 AliMixture(15,"CERAMICS$",acer,zcer,denscer,5,wcer);
941 AliMedium(15,"CERAMICS$",15,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
943 AliMixture(20,"SSD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
944 AliMedium(20,"SSD C (M55J)$",20,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
946 AliMixture(21,"SSD AIR$",aAir,zAir,dAir,4,wAir);
947 AliMedium(21,"SSD AIR$",21,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
949 AliMixture(25,"G10FR4$",aG10FR4,zG10FR4,densG10FR4,14,wG10FR4);
950 AliMedium(25,"G10FR4$",25,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
952 AliMixture(26,"GEN C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
953 AliMedium(26,"GEN C (M55J)$",26,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
955 AliMixture(27,"GEN Air$",aAir,zAir,dAir,4,wAir);
956 AliMedium(27,"GEN Air$",27,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
958 AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
959 AliMedium(51,"SPD SI$",51,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
961 AliMaterial(52,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
962 AliMedium(52,"SPD SI CHIP$",52,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
964 AliMaterial(53,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
965 AliMedium(53,"SPD SI BUS$",53,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
967 AliMixture(54,"SPD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
968 AliMedium(54,"SPD C (M55J)$",54,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
970 AliMixture(55,"SPD AIR$",aAir,zAir,dAir,4,wAir);
971 AliMedium(55,"SPD AIR$",55,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
973 AliMixture(56, "SPD KAPTON(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
974 AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
976 AliMixture(61,"EPOXY$",aEpoxy,zEpoxy,dEpoxy,-3,wEpoxy);
977 AliMedium(61,"EPOXY$",61,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
979 AliMaterial(62,"SILICON$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
980 AliMedium(62,"SILICON$",62,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
982 AliMixture(63, "KAPTONH(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
983 AliMedium(63,"KAPTONH(POLYCH2)$",63,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
985 AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
986 AliMedium(64,"ALUMINUM$",64,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
988 AliMixture(65,"INOX$",aINOX,zINOX,dINOX,9,wINOX);
989 AliMedium(65,"INOX$",65,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
991 AliMixture(68,"ROHACELL$",arohac,zrohac,drohac,-4,wrohac);
992 AliMedium(68,"ROHACELL$",68,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
994 AliMixture(69,"SDD C AL (M55J)$",aALCM55J,zALCM55J,dALCM55J,5,wALCM55J);
995 AliMedium(69,"SDD C AL (M55J)$",69,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
997 AliMixture(70, "SDDKAPTON (POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
998 AliMedium(70,"SDDKAPTON (POLYCH2)$",70,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1000 AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
1001 AliMedium(71,"ITS SANDW A$",71,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1003 AliMaterial(72,"ITS SANDW B$",0.12011E+02,0.60000E+01,0.27000E+00,0.18956E+03,0.99900E+03);
1004 AliMedium(72,"ITS SANDW B$",72,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1006 AliMaterial(73,"ITS SANDW C$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
1007 AliMedium(73,"ITS SANDW C$",73,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1009 AliMaterial(74,"HEAT COND GLUE$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
1010 AliMedium(74,"HEAT COND GLUE$",74,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1012 AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
1013 AliMedium(75,"ELASTO SIL$",75,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1015 // SPD bus (data from Petra Riedler)
1016 Float_t aSPDbus[5] = {1.00794,12.0107,14.01,15.9994,26.982 };
1017 Float_t zSPDbus[5] = {1.,6.,7.,8.,13.};
1018 Float_t wSPDbus[5] = {0.023523,0.318053,0.009776,0.078057,0.570591};
1019 Float_t dSPDbus = 2.128505;
1021 // AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
1022 AliMixture(76,"SPDBUS(AL+KPT+EPOX)$",aSPDbus,zSPDbus,dSPDbus,5,wSPDbus);
1023 AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1025 AliMixture(77,"SDD X7R capacitors$",aX7R,zX7R,dX7R,7,wX7R);
1026 AliMedium(77,"SDD X7R capacitors$",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1028 AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide);
1029 AliMedium(78,"SDD ruby sph. Al2O3$",78,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1031 AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
1032 AliMedium(79,"SDD SI insensitive$",79,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1034 AliMixture(80,"SDD HV microcable$",aHVm,zHVm,dHVm,5,wHVm);
1035 AliMedium(80,"SDD HV microcable$",80,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1037 AliMixture(81,"SDD LV+signal cable$",aLVm,zLVm,dLVm,5,wLVm);
1038 AliMedium(81,"SDD LV+signal cable$",81,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1040 AliMixture(82,"SDD hybrid microcab$",aHLVm, zHLVm,dHLVm,5,wHLVm);
1041 AliMedium(82,"SDD hybrid microcab$",82,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1043 AliMixture(83,"SDD anode microcab$",aALVm,zALVm,dALVm,5,wALVm);
1044 AliMedium(83,"SDD anode microcab$",83,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1045 Float_t aDSring[4]={12.0107, 1.00794, 14.0067, 15.9994};
1046 Float_t zDSring[4]={ 6., 1., 7., 8.};
1047 Float_t wDSring[4]={ 0.854323888, 0.026408778, 0.023050265, 0.096217069};
1048 Float_t dDSring = 0.2875;
1049 AliMixture(84,"SDD/SSD rings$",aDSring,zDSring,dDSring,4,wDSring);
1050 AliMedium(84,"SDD/SSD rings$",84,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1052 AliMixture(85,"inox/alum$",aInAl,zInAl,dInAl,5,wInAl);
1053 AliMedium(85,"inox/alum$",85,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1055 // special media to take into account services in the SDD and SSD
1056 // cones for the FMD
1059 <A HREF="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_MatBudget_4B.xls">
1062 <font size=+2 color=blue>
1063 <p> The Exel spread sheet from which these density number come from.
1068 // AliMaterial(86,"AIRFMDSDD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
1069 Float_t aA[13],zZ[13],wW[13],den;
1070 // From Pierluigi Barberis calculations of 2SPD+1SDD October 2 2002.
1071 zZ[0] = 1.0; aA[0] = 1.00794; // Hydrogen
1072 zZ[1] = 6.0; aA[1] = 12.011; // Carbon
1073 zZ[2] = 7.0; aA[2] = 14.00674; // Nitrogen
1074 zZ[3] = 8.0; aA[3] = 15.9994; // Oxigen
1075 zZ[4] = 14.0; aA[4] = 28.0855; // Silicon
1076 zZ[5] = 24.0; aA[5] = 51.9961; //Cromium
1077 zZ[6] = 25.0; aA[6] = 54.938049; // Manganese
1078 zZ[7] = 26.0; aA[7] = 55.845; // Iron
1079 zZ[8] = 28.0; aA[8] = 58.6934; // Nickle
1080 zZ[9] = 29.0; aA[9] = 63.546; // Copper
1081 zZ[10] = 13.0; aA[10] = 26.981539; // Alulminum
1082 zZ[11] = 47.0; aA[11] = 107.8682; // Silver
1083 zZ[12] = 27.0; aA[12] = 58.9332; // Cobolt
1097 if(fByThick){// New values seeITS_MatBudget_4B.xls
1098 den = 1.5253276; // g/cm^3 Cell O370
1100 den = 2.58423412; // g/cm^3 Cell L370
1101 } // end if fByThick
1102 //den = 6161.7/(3671.58978);//g/cm^3 Volume does not exclude holes
1103 AliMixture(86,"AIRFMDSDD$",aA,zZ,den,+11,wW);
1104 AliMedium(86,"AIRFMDSDD$",86,0,ifield,fieldm,tmaxfdAir,stemaxAir,
1105 deemaxAir,epsilAir,stminAir);
1107 //AliMaterial(87,"AIRFMDSSD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
1108 // From Pierluigi Barberis calculations of SSD October 2 2002.
1122 if(fByThick){// New values seeITS_MatBudget_4B.xls
1123 den = 1.2464275; // g/cm^3 Cell O403
1125 den = 1.28134409; // g/cm^3 Cell L403
1126 } // end if fByThick
1127 //den = 7666.3/(9753.553259); // volume does not exclude holes
1128 AliMixture(87,"AIRFMDSSD$",aA,zZ,den,+12,wW);
1129 AliMedium(87,"AIRFMDSSD$",87,0,ifield,fieldm,tmaxfdAir,stemaxAir,
1130 deemaxAir,epsilAir,stminAir);
1132 //AliMaterial(88,"ITS SANDW CFMDSDD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
1133 // From Pierluigi Barberis calculations of 1SDD+Carbon fiber October 2 2002
1147 if(fByThick){// New values seeITS_MatBudget_4B.xls
1148 den = 1.9353276; // g/cm^3 Cell N370
1150 den = 3.2788626; // g/cm^3 Cell F370
1151 } // end if fByThick
1152 //den = 7667.1/(3671.58978); // Volume does not excludeholes
1153 AliMixture(88,"ITS SANDW CFMDSDD$",aA,zZ,den,+11,wW);
1154 AliMedium(88,"ITS SANDW CFMDSDD$",88,0,ifield,fieldm,tmaxfd,stemax,
1155 deemax,epsil,stmin);
1157 //AliMaterial(89,"ITS SANDW CFMDSSD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
1158 // From Pierluigi Barberis calculations of SSD+Carbon fiber October 2 2002.
1172 if(fByThick){// New values seeITS_MatBudget_4B.xls
1173 den = 1.6564275; // g/cm^3 Cell N304
1175 den = 1.7028296; // g/cm^3 Cell F304
1176 } // end if fByThick
1177 //den = 1166.5/(3671.58978); // Volume does not exclude holes
1178 AliMixture(89,"ITS SANDW CFMDSSD$",aA,zZ,den,+12,wW);
1179 AliMedium(89,"ITS SANDW CFMDSSD$",89,0,ifield,fieldm,tmaxfd,stemax,
1180 deemax,epsil,stmin);
1182 //AliMaterial(97,"SPD SERVICES$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
1183 // From Pierluigi Barberis calculations of 1SPD October 2 2002.
1197 if(fByThick){// New values seeITS_MatBudget_4B.xls
1198 den = 80.31136576; // g/cm^3 Cell H329
1200 den = 87.13062; // g/cm^3 Cell G329
1201 } // end if fByThick
1202 //den = 1251.3/(0.05*2.0*TMath::Pi()*(7.75*7.75 - 3.7*3.7)); // g/cm^3
1203 AliMixture(97,"SPD SERVICES$",aA,zZ,den,+10,wW);
1204 AliMedium(97,"SPD SERVICES$",97,0,ifield,fieldm,tmaxfd,stemax,
1205 deemax,epsil,stmin);
1210 AliMaterial(90,"SPD shield$", 12.011, 6., 1.93/10. , 22.1*10., 999);
1211 AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1213 // SPD End Ladder (data from Petra Riedler)
1214 Float_t aSPDel[5] = {1.00794,12.0107,14.01,15.9994,63.54 };
1215 Float_t zSPDel[5] = {1.,6.,7.,8.,29.};
1216 Float_t wSPDel[5] = {0.004092,0.107274,0.011438,0.032476,0.844719};
1217 Float_t dSPDel = 3.903403;
1219 // AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
1220 AliMixture(91,"SPD End ladder$",aSPDel,zSPDel,dSPDel,5,wSPDel);
1221 AliMedium(91,"SPD End ladder$",91,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1223 AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
1224 AliMedium(92,"SPD cone$",92,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1225 /* Material with fractional Z not actually used
1226 AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
1227 AliMedium(93,"SDD End ladder$",93,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1229 AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999);
1230 AliMedium(94,"SDD cone$",94,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1231 /* Material with fractional Z not actually used
1232 AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
1233 AliMedium(95,"SSD End ladder$",95,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1235 AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
1236 AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1241 //______________________________________________________________________
1242 void AliITSv11::InitAliITSgeom(){
1244 // Fill fITSgeom with the 3 sub-detector geometries
1247 const Int_t knlayers = 6;
1248 const Int_t kndeep = 3;
1249 const AliITSDetector idet[knlayers]={kSPD,kSPD,kSDD,kSDD,kSSD,kSSD};
1250 const TString names[knlayers] = {
1254 "/ALIC_1/ITSV_1/ITSsddLayer3_1/ITSsddLadd_%d/ITSsddSensor_%d/ITSsddWafer_%d", // lay=3
1255 "/ALIC_1/ITSV_1/ITSsddLayer4_1/ITSsddLadd_%d/ITSsddSensor_%d/ITSsddWafer_%d", // lay=4
1259 const Int_t itsGeomTreeCopys[knlayers][kndeep]= {{10, 2, 4},// lay=1
1265 Int_t nlad[knlayers],ndet[knlayers];
1266 Int_t mod,lay,lad=0,det=0,i,j,k,cp0,cp1,cp2;
1267 TString path,shapeName;
1268 TGeoHMatrix materix;
1269 Double_t trans[3]={3*0.0},rot[10]={9*0.0,1.0};
1273 AliDebug(1,"Reading Geometry transformation directly from Modler.");
1275 for(i=0;i<knlayers;i++){
1277 for(j=0;j<kndeep;j++) if(itsGeomTreeCopys[i][j]!=0)
1278 k *= TMath::Abs(itsGeomTreeCopys[i][j]);
1282 if(GetITSgeom()!=0) delete GetITSgeom();
1284 nlad[0]=20;nlad[1]=40;nlad[2]=14;nlad[3]=22;nlad[4]=34;nlad[5]=38;
1285 ndet[0]= 4;ndet[1]= 4;ndet[2]= 6;ndet[3]= 8;ndet[4]=22;ndet[5]=25;
1286 AliITSgeom* geom = new AliITSgeom(0,6,nlad,ndet,mod);
1289 for(lay=1;lay<=knlayers;lay++){
1290 for(cp0=1;cp0<=itsGeomTreeCopys[lay-1][0];cp0++){
1291 for(cp1=1;cp1<=itsGeomTreeCopys[lay-1][1];cp1++){
1292 for(cp2=1;cp2<=itsGeomTreeCopys[lay-1][2];cp2++){
1293 path.Form(names[lay-1].Data(),
1298 lad = cp1+2*(cp0-1);
1302 lad = cp1+4*(cp0-1);
1304 case 3: case 4: case 5: case 6:{
1309 //AliInfo(Form("path=%s lay=%d lad=%d det=%d",
1310 // path.Data(),lay,lad,det));
1311 gMC->GetTransformation(path.Data(),materix);
1312 gMC->GetShape(path.Data(),shapeName,shapePar);
1313 shapeParF.Set(shapePar.GetSize());
1314 for(i=0;i<shapePar.GetSize();i++) shapeParF[i]=shapePar[i];
1315 geom->CreateMatrix(mod,lay,lad,det,idet[lay-1],trans,rot);
1316 geom->SetTrans(mod,materix.GetTranslation());
1317 geom->SetRotMatrix(mod,materix.GetRotationMatrix());
1320 geom->ReSetShape(kSPD,new AliITSgeomSPD425Short(
1321 shapeParF.GetSize(),shapeParF.GetArray()));
1324 geom->ReSetShape(kSDD,new AliITSgeomSDD256(
1325 shapeParF.GetSize(),shapeParF.GetArray()));
1328 geom->ReSetShape(kSSD,new AliITSgeomSSD75and275(
1329 shapeParF.GetSize(),shapeParF.GetArray()));
1341 // fSDDgeom->ExportSensorGeometry(GetITSgeom(), +3, 0); //SDD
1346 //______________________________________________________________________
1347 void AliITSv11::Init(){
1349 // Initialise the ITS after it has been created.
1352 //AliInfo(Form("Minor version %d",fMinorVersion));
1354 if(fRead[0]=='\0') strncpy(fRead,fEuclidGeomDet,60);
1355 if(fWrite[0]=='\0') strncpy(fWrite,fEuclidGeomDet,60);
1356 if(GetITSgeom()!=0) SetITSgeom(0x0);
1357 AliITSgeom* geom = new AliITSgeom();
1359 if(fGeomDetIn) GetITSgeom()->ReadNewFile(fRead);
1360 else this->InitAliITSgeom();
1361 if(fGeomDetOut) GetITSgeom()->WriteNewFile(fWrite);
1366 //______________________________________________________________________
1367 void AliITSv11::SetDefaults(){
1369 // Set response ans segmentation models for SPD, SDD and SSD
1371 const Float_t kconv = 1.0e+04; // convert cm to microns
1374 if(!fDetTypeSim) fDetTypeSim = new AliITSDetTypeSim();
1375 fDetTypeSim->SetITSgeom(GetITSgeom());
1381 Float_t bx[256],bz[280];
1383 fDetTypeSim->ResetCalibrationArray();
1384 fDetTypeSim->ResetSegmentation();
1385 fDetTypeSim->SetDefaults();
1388 s0 = (AliITSgeomSPD*) GetITSgeom()->GetShape(kSPD);// Get shape info. Do it this way for now.
1389 AliITSsegmentationSPD* seg0 = (AliITSsegmentationSPD*)fDetTypeSim->GetSegmentationModel(0);
1390 seg0->SetDetSize(s0->GetDx()*2.*kconv, // base this on AliITSgeomSPD
1391 s0->GetDz()*2.*kconv, // for now.
1392 s0->GetDy()*2.*kconv); // x,z,y full width in microns.
1393 seg0->SetNPads(256,160);// Number of Bins in x and z
1394 for(i=000;i<256;i++) bx[i] = 50.0; // in x all are 50 microns.
1395 for(i=000;i<160;i++) bz[i] = 425.0; // most are 425 microns except below
1396 for(i=160;i<280;i++) bz[i] = 0.0; // Outside of detector.
1397 bz[ 31] = bz[ 32] = 625.0; // first chip boundry
1398 bz[ 63] = bz[ 64] = 625.0; // first chip boundry
1399 bz[ 95] = bz[ 96] = 625.0; // first chip boundry
1400 bz[127] = bz[128] = 625.0; // first chip boundry
1401 bz[160] = 425.0; // Set so that there is no zero pixel size for fNz.
1402 seg0->SetBinSize(bx,bz); // Based on AliITSgeomSPD for now.
1403 SetSegmentationModel(kSPD,seg0);
1404 // set digit and raw cluster classes to be used
1405 const char *kData0=(fDetTypeSim->GetCalibrationModel(GetITSgeom()->GetStartSPD()))->DataType();
1406 if (strstr(kData0,"real")) fDetTypeSim->SetDigitClassName(kSPD,"AliITSdigit");
1407 else fDetTypeSim->SetDigitClassName(kSPD,"AliITSdigitSPD");
1412 s1 = (AliITSgeomSDD*) GetITSgeom()->GetShape(kSDD);// Get shape info. Do it this way for now.
1413 AliITSsegmentationSDD* seg1 = (AliITSsegmentationSDD*)fDetTypeSim->GetSegmentationModel(1);
1414 seg1->SetDetSize(s1->GetDx()*kconv, // base this on AliITSgeomSDD
1415 s1->GetDz()*2.*kconv, // for now.
1416 s1->GetDy()*2.*kconv); // x,z,y full width in microns.
1417 seg1->SetNPads(256,256);// Use AliITSgeomSDD for now
1418 SetSegmentationModel(kSDD,seg1);
1419 const char *kData1=(fDetTypeSim->GetCalibrationModel(GetITSgeom()->GetStartSDD()))->DataType();
1420 AliITSCalibrationSDD* rsp = (AliITSCalibrationSDD*)fDetTypeSim->GetCalibrationModel(GetITSgeom()->GetStartSDD());
1421 const char *kopt=rsp->GetZeroSuppOption();
1422 if((!strstr(kopt,"2D")) && (!strstr(kopt,"1D")) || strstr(kData1,"real") ){
1423 fDetTypeSim->SetDigitClassName(kSDD,"AliITSdigit");
1424 } else fDetTypeSim->SetDigitClassName(kSDD,"AliITSdigitSDD");
1428 s2 = (AliITSgeomSSD*) GetITSgeom()->GetShape(kSSD);// Get shape info. Do it this way for now.
1429 AliITSsegmentationSSD* seg2 = (AliITSsegmentationSSD*)fDetTypeSim->GetSegmentationModel(2);
1430 seg2->SetDetSize(s2->GetDx()*2.*kconv, // base this on AliITSgeomSSD
1431 s2->GetDz()*2.*kconv, // for now.
1432 s2->GetDy()*2.*kconv); // x,z,y full width in microns.
1433 seg2->SetPadSize(95.,0.); // strip x pitch in microns
1434 seg2->SetNPads(768,0); // number of strips on each side.
1435 seg2->SetAngles(0.0075,0.0275); // strip angels rad P and N side.
1436 seg2->SetAnglesLay5(0.0075,0.0275); // strip angels rad P and N side.
1437 seg2->SetAnglesLay6(0.0275,0.0075); // strip angels rad P and N side.
1438 SetSegmentationModel(kSSD,seg2);
1439 const char *kData2=(fDetTypeSim->GetCalibrationModel(GetITSgeom()->GetStartSSD()))->DataType();
1440 if(strstr(kData2,"real") ) fDetTypeSim->SetDigitClassName(kSSD,"AliITSdigit");
1441 else fDetTypeSim->SetDigitClassName(kSSD,"AliITSdigitSSD");
1443 Warning("SetDefaults",
1444 "Only the four basic detector types are initialised!");
1452 //______________________________________________________________________
1453 void AliITSv11::DrawModule() const{
1457 //______________________________________________________________________
1458 void AliITSv11::StepManager(){
1460 // Called for every step in the ITS, then calles the AliITShit class
1461 // creator with the information to be recoreded about that hit.
1464 TLorentzVector position, momentum;
1465 static TLorentzVector position0;
1466 static Int_t stat0=0;
1468 if(!(this->IsActive())){
1470 } // end if !Active volume.
1472 if(!(gMC->TrackCharge())) return;
1474 id=gMC->CurrentVolID(copy);
1476 Bool_t sensvol = kFALSE;
1477 for(Int_t kk=0;kk<6;kk++)if(id == fIdSens[kk])sensvol=kTRUE;
1478 if(sensvol && (gMC->IsTrackExiting())){
1479 copy = fTrackReferences->GetEntriesFast();
1480 TClonesArray &lTR = *fTrackReferences;
1481 // Fill TrackReference structure with this new TrackReference.
1482 new(lTR[copy]) AliTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber());
1483 } // if Outer ITS mother Volume
1488 TClonesArray &lhits = *fHits;
1493 if(gMC->IsTrackInside()) vol[3] += 1;
1494 if(gMC->IsTrackEntering()) vol[3] += 2;
1495 if(gMC->IsTrackExiting()) vol[3] += 4;
1496 if(gMC->IsTrackOut()) vol[3] += 8;
1497 if(gMC->IsTrackDisappeared()) vol[3] += 16;
1498 if(gMC->IsTrackStop()) vol[3] += 32;
1499 if(gMC->IsTrackAlive()) vol[3] += 64;
1501 // Fill hit structure.
1502 if(!(gMC->TrackCharge())) return;
1504 // Only entering charged tracks
1505 if((id = gMC->CurrentVolID(copy)) == fIdSens[0]) {
1507 id = gMC->CurrentVolOffID(2,copy);
1508 //detector copy in the ladder = 1<->4 (ITS1 < I101 < I103 < I10A)
1510 gMC->CurrentVolOffID(3,copy1);
1511 //ladder copy in the module = 1<->2 (I10A < I12A)
1512 gMC->CurrentVolOffID(4,copy2);
1513 //module copy in the layer = 1<->10 (I12A < IT12)
1514 vol[2] = copy1+(copy2-1)*2;//# of ladders in one module = 2
1515 } else if(id == fIdSens[1]){
1517 id = gMC->CurrentVolOffID(2,copy);
1518 //detector copy in the ladder = 1<->4 (ITS2 < I1D1 < I1D3 < I20A)
1520 gMC->CurrentVolOffID(3,copy1);
1521 //ladder copy in the module = 1<->4 (I20A < I12A)
1522 gMC->CurrentVolOffID(4,copy2);
1523 //module copy in the layer = 1<->10 (I12A < IT12)
1524 vol[2] = copy1+(copy2-1)*4;//# of ladders in one module = 4
1525 } else if(id == fIdSens[2]){
1527 id = gMC->CurrentVolOffID(1,copy);
1528 //detector copy in the ladder = 1<->6 (ITS3 < I302 < I004)
1530 id = gMC->CurrentVolOffID(2,copy);
1531 //ladder copy in the layer = 1<->14 (I004 < IT34)
1533 } else if(id == fIdSens[3]){
1535 id = gMC->CurrentVolOffID(1,copy);
1536 //detector copy in the ladder = 1<->8 (ITS4 < I402 < I005)
1538 id = gMC->CurrentVolOffID(2,copy);
1539 //ladder copy in the layer = 1<->22 (I005 < IT34))
1541 }else if(id == fIdSens[4]){
1543 id = gMC->CurrentVolOffID(1,copy);
1544 //detector copy in the ladder = 1<->22 (ITS5 < I562 < I565)
1546 id = gMC->CurrentVolOffID(2,copy);
1547 //ladder copy in the layer = 1<->34 (I565 < IT56)
1549 }else if(id == fIdSens[5]){
1551 id = gMC->CurrentVolOffID(1,copy);
1552 //detector copy in the ladder = 1<->25 (ITS6 < I566 < I569)
1554 id = gMC->CurrentVolOffID(2,copy);
1555 //ladder copy in the layer = 1<->38 (I569 < IT56)
1558 return; // not an ITS volume?
1559 } // end if/else if (gMC->CurentVolID(copy) == fIdSens[i])
1561 gMC->TrackPosition(position);
1562 gMC->TrackMomentum(momentum);
1564 if(gMC->IsTrackEntering()){
1565 position0 = position;
1568 } // end if IsEntering
1569 // Fill hit structure with this new hit.
1571 new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->GetMCApp()->GetCurrentTrackNumber(),vol,
1572 gMC->Edep(),gMC->TrackTime(),position,
1573 position0,momentum);
1575 position0 = position;