1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
16 // This class Defines the Geometry for the ITS services and support cones
17 // outside of the ceneteral volume (except for the Ceneteral support
18 // cylinders. Other classes define the rest of the ITS. Specificaly the ITS
19 // The SSD support cone,SSD Support centeral cylinder, SDD support cone,
20 // The SDD cupport centeral cylinder, the SPD Thermal Sheald, The supports
21 // and cable trays on both the RB26 (muon dump) and RB24 sides, and all of
22 // the cabling from the ladders/stave ends out past the TPC.
25 // General Root includes
27 // Root Geometry includes
29 #include <TGeoManager.h>
30 #include <TGeoVolume.h>
33 #include <TGeoTube.h> // contaings TGeoTubeSeg
36 #include <TGeoCompositeShape.h>
37 #include <TGeoMatrix.h>
38 #include "AliITSv11GeometrySupport.h"
40 ClassImp(AliITSv11GeometrySupport)
44 //______________________________________________________________________
45 void AliITSv11GeometrySupport::SPDCone(TGeoVolume *moth,TGeoManager *mgr)
48 // Creates the SPD thermal shield as a volume assembly
49 // and adds it to the mother volume
50 // (this is actually a merge of the previous SPDThermalSheald method
51 // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06 and the
52 // CreateSPDThermalShield method of AliITSv11Hybrid)
55 // moth : the TGeoVolume owing the volume structure
56 // mgr : the GeoManager (default gGeoManager)
60 // Updated: 11 Dec 2007 Mario Sitta
62 // Technical data are taken from: ALICE-Thermal Screen "Cone transition"
63 // (thermal-screen1_a3.ps), "Cylinder" (thermal-screen2_a3.ps), "Half
64 // assembly" (thermal-screen3_a3.ps), "Flange" (thermal-screen4_a3.ps)
67 // Dimensions of the Central shield
68 const Double_t kHalfLengthCentral = 400.*fgkmm;
69 const Double_t kThicknessCentral = 0.4*fgkmm;
70 const Double_t kInnerRadiusCentral = 8.1475*fgkcm;
71 const Double_t kOuterRadiusCentral = 9.9255*fgkcm;
72 const Double_t kInnerACentral = 3.1674*fgkcm;
73 const Double_t kInnerBCentral = 2.023 *fgkcm;
74 const Double_t kOuterACentral = 2.4374*fgkcm;
75 const Double_t kOuterBCentral = 3.8162*fgkcm;
76 // Dimensions of the EndCap shield
77 const Double_t kHalfLengthEndCap = 25.*fgkmm;
78 const Double_t kThicknessEndCap = 2.0*fgkmm;
79 const Double_t kInnerRadiusEndCap = 8.0775*fgkcm;
80 const Double_t kOuterRadiusEndCap = 9.9955*fgkcm;
81 const Double_t kInnerAEndCap = 3.1453*fgkcm;
82 const Double_t kInnerBEndCap = 2.0009*fgkcm;
83 const Double_t kOuterAEndCap = 2.4596*fgkcm;
84 const Double_t kOuterBEndCap = 3.8384*fgkcm;
85 // Dimensions of the Cone shield
86 const Double_t kHalfLengthCone = 145.*fgkmm;
87 const Double_t kThicknessCone = 0.3*fgkmm;
88 const Double_t kInnerRadialCone = 37.3*fgkcm;
89 const Double_t kOuterRadialCone = 39.0*fgkcm;
90 const Double_t kInnerACone = 14.2344*fgkcm;
91 // const Double_t kInnerBCone = 9.0915*fgkcm;
92 const Double_t kOuterACone = 9.5058*fgkcm;
93 // const Double_t kOuterBCone = 14.8831*fgkcm;
94 // Dimensions of the Flange's Ring and Wing
95 const Double_t kHalfLengthRing = 7.5*fgkmm;
96 const Double_t kThicknessRing = 0.3*fgkmm;
97 const Double_t kInnerRadiusRing = 37.3*fgkcm;
98 const Double_t kOuterRadiusRing = 42.0*fgkcm;
99 const Double_t kOuterRadiusWing = 49.25*fgkcm;
100 const Double_t kWideWing = 6.0*fgkcm;
101 const Double_t kThetaWing = 45.0;
103 const Double_t kTheta = 36.0*TMath::DegToRad();
104 const Double_t kThicknessOmega = 0.3*fgkmm;
108 Double_t xshld[24], yshld[24];
109 Double_t xair[24] , yair[24];
110 Double_t xomega[48], yomega[48];
113 // The entire shield is made up of two half central shields
114 // symmetric with respect to the XZ plane, four half end cap
115 // shields, again symmetric with respect to the XZ plane, and four
116 // half cones, symmetric with respect to the XZ plane too.
118 TGeoVolumeAssembly *vM = new TGeoVolumeAssembly("ITSspdThermalShield");
120 // The central half shield: a half tube of carbon fiber,
121 // a similar but proportionally smaller half tube of air inside it,
122 // and a Omega-shaped carbon fiber insert inside the air.
123 // They are all XTru shapes
125 TGeoXtru *centralshape = new TGeoXtru(2);
127 CreateSPDThermalShape(kInnerACentral,kInnerBCentral,kInnerRadiusCentral,
128 kOuterACentral,kOuterBCentral,kOuterRadiusCentral,
131 centralshape->DefinePolygon(24,xshld,yshld);
132 centralshape->DefineSection(0,-kHalfLengthCentral);
133 centralshape->DefineSection(1, kHalfLengthCentral);
135 // Now rescale to get the air volume dimensions
136 InsidePoint(xshld[23], yshld[23],
137 xshld[ 0], yshld[ 0],
138 xshld[ 1], yshld[ 1], kThicknessCentral,
140 for (Int_t i=1; i<23; i++) {
141 InsidePoint(xshld[i-1], yshld[i-1],
142 xshld[ i ], yshld[ i ],
143 xshld[i+1], yshld[i+1], kThicknessCentral,
146 InsidePoint(xshld[22], yshld[22],
147 xshld[23], yshld[23],
148 xshld[ 0], yshld[ 0], kThicknessCentral,
151 // Create the air shape
152 TGeoXtru *centralairshape = new TGeoXtru(2);
154 centralairshape->DefinePolygon(24,xair,yair);
155 centralairshape->DefineSection(0,-kHalfLengthCentral);
156 centralairshape->DefineSection(1, kHalfLengthCentral);
158 // Create the Omega insert
159 TGeoXtru *centralomegashape = new TGeoXtru(2);
161 CreateSPDOmegaShape(xair,yair,kThicknessOmega,xomega,yomega);
163 centralomegashape->DefinePolygon(48,xomega,yomega);
164 centralomegashape->DefineSection(0,-kHalfLengthCentral);
165 centralomegashape->DefineSection(1, kHalfLengthCentral);
167 // The end cap half shield: a half tube of carbon fiber,
168 // a similar but proportionally smaller half tube of air inside it,
169 // and a Omega-shaped carbon fiber insert inside the air.
170 // They are all XTru shapes
172 TGeoXtru *endcapshape = new TGeoXtru(2);
174 CreateSPDThermalShape(kInnerAEndCap,kInnerBEndCap,kInnerRadiusEndCap,
175 kOuterAEndCap,kOuterBEndCap,kOuterRadiusEndCap,
178 endcapshape->DefinePolygon(24,xshld,yshld);
179 endcapshape->DefineSection(0,-kHalfLengthEndCap);
180 endcapshape->DefineSection(1, kHalfLengthEndCap);
182 // Now rescale to get the air volume dimensions
183 InsidePoint(xshld[23], yshld[23],
184 xshld[ 0], yshld[ 0],
185 xshld[ 1], yshld[ 1], kThicknessEndCap,
187 for (Int_t i=1; i<23; i++) {
188 InsidePoint(xshld[i-1], yshld[i-1],
189 xshld[ i ], yshld[ i ],
190 xshld[i+1], yshld[i+1], kThicknessEndCap,
193 InsidePoint(xshld[22], yshld[22],
194 xshld[23], yshld[23],
195 xshld[ 0], yshld[ 0], kThicknessEndCap,
198 // Create the air shape
199 TGeoXtru *endcapairshape = new TGeoXtru(2);
201 endcapairshape->DefinePolygon(24,xair,yair);
202 endcapairshape->DefineSection(0,-kHalfLengthEndCap);
203 endcapairshape->DefineSection(1, kHalfLengthEndCap);
205 // Create the Omega insert
206 TGeoXtru *endcapomegashape = new TGeoXtru(2);
208 CreateSPDOmegaShape(xair,yair,kThicknessOmega,xomega,yomega);
210 endcapomegashape->DefinePolygon(48,xomega,yomega);
211 endcapomegashape->DefineSection(0,-kHalfLengthEndCap);
212 endcapomegashape->DefineSection(1, kHalfLengthEndCap);
214 // The cone half shield is more complex since there is no basic
215 // TGeo shape to describe it correctly. So it is made of a series
216 // of TGeoArb8 shapes filled with air, which all together make up the
217 // the cone AND its internal insert. Part of the following code is
218 // adapted from SPDThermalSheald method.
221 TGeoArb8 *sC1 = new TGeoArb8(kHalfLengthCone);
222 TGeoArb8 *sC2 = new TGeoArb8(kHalfLengthCone);
224 CreateSPDThermalShape(kInnerACentral,kInnerBCentral,kInnerRadiusCentral,
225 kOuterACentral,kOuterBCentral,kOuterRadiusCentral,
228 sC1->SetVertex(0,xshld[12],yshld[12]);
229 sC1->SetVertex(1,xshld[11],yshld[11]);
230 sC1->SetVertex(2,xshld[ 0],yshld[ 0]);
231 sC1->SetVertex(3,xshld[23],yshld[23]);
233 sC2->SetVertex(0,xshld[11],yshld[11]);
234 sC2->SetVertex(1,xshld[10],yshld[10]);
235 sC2->SetVertex(2,xshld[ 1],yshld[ 1]);
236 sC2->SetVertex(3,xshld[ 0],yshld[ 0]);
238 // Drawings give only the radius, convert it to the apothegm
239 Double_t kInnerRadiusCone = TMath::Sqrt(kInnerRadialCone*kInnerRadialCone
240 - 0.25*kInnerACone*kInnerACone);
241 Double_t kOuterRadiusCone = TMath::Sqrt(kOuterRadialCone*kOuterRadialCone
242 - 0.25*kOuterACone*kOuterACone);
244 Double_t xco[4], yco[4], xci[4], yci[4];
246 for (Int_t i=0; i<2; i++) {
247 Double_t th = i*kTheta*TMath::RadToDeg();
248 xco[2*i ] = kOuterRadiusCone*SinD(th) - 0.5*kOuterACone*CosD(th);
249 yco[2*i ] = kOuterRadiusCone*CosD(th) + 0.5*kOuterACone*SinD(th);
250 xci[2*i ] = kInnerRadiusCone*SinD(th) - 0.5*kInnerACone*CosD(th);
251 yci[2*i ] = kInnerRadiusCone*CosD(th) + 0.5*kInnerACone*SinD(th);
252 xco[2*i+1] = kOuterRadiusCone*SinD(th) + 0.5*kOuterACone*CosD(th);
253 yco[2*i+1] = kOuterRadiusCone*CosD(th) - 0.5*kOuterACone*SinD(th);
254 xci[2*i+1] = kInnerRadiusCone*SinD(th) + 0.5*kInnerACone*CosD(th);
255 yci[2*i+1] = kInnerRadiusCone*CosD(th) - 0.5*kInnerACone*SinD(th);
258 sC1->SetVertex(4,xco[0],yco[0]);
259 sC1->SetVertex(5,xco[1],yco[1]);
260 sC1->SetVertex(6,xci[1],yci[1]);
261 sC1->SetVertex(7,xci[0],yci[0]);
263 sC2->SetVertex(4,xco[1],yco[1]);
264 sC2->SetVertex(5,xco[2],yco[2]);
265 sC2->SetVertex(6,xci[2],yci[2]);
266 sC2->SetVertex(7,xci[1],yci[1]);
269 TGeoArb8 *sCh1 = new TGeoArb8(kHalfLengthCone);
270 TGeoArb8 *sCh2 = new TGeoArb8(kHalfLengthCone);
272 for(Int_t i=0; i<4; i++){
273 InsidePoint(sC1->GetVertices()[((i+3)%4)*2+0],
274 sC1->GetVertices()[((i+3)%4)*2+1],
275 sC1->GetVertices()[i*2+0],
276 sC1->GetVertices()[i*2+1],
277 sC1->GetVertices()[((i+1)%4)*2+0],
278 sC1->GetVertices()[((i+1)%4)*2+1],-kThicknessCone,x,y);
279 sCh1->SetVertex(i,x,y);
281 InsidePoint(sC1->GetVertices()[((i+3)%4 +4)*2+0],
282 sC1->GetVertices()[((i+3)%4 +4)*2+1],
283 sC1->GetVertices()[(i+4)*2+0],
284 sC1->GetVertices()[(i+4)*2+1],
285 sC1->GetVertices()[((i+1)%4 +4)*2+0],
286 sC1->GetVertices()[((i+1)%4 +4)*2+1],-kThicknessCone,x,y);
287 sCh1->SetVertex(i+4,x,y);
289 InsidePoint(sC2->GetVertices()[((i+3)%4)*2+0],
290 sC2->GetVertices()[((i+3)%4)*2+1],
291 sC2->GetVertices()[i*2+0],
292 sC2->GetVertices()[i*2+1],
293 sC2->GetVertices()[((i+1)%4)*2+0],
294 sC2->GetVertices()[((i+1)%4)*2+1],-kThicknessCone,x,y);
295 sCh2->SetVertex(i,x,y);
297 InsidePoint(sC2->GetVertices()[((i+3)%4 +4)*2+0],
298 sC2->GetVertices()[((i+3)%4 +4)*2+1],
299 sC2->GetVertices()[(i+4)*2+0],
300 sC2->GetVertices()[(i+4)*2+1],
301 sC2->GetVertices()[((i+1)%4 +4)*2+0],
302 sC2->GetVertices()[((i+1)%4 +4)*2+1],-kThicknessCone,x,y);
303 sCh2->SetVertex(i+4,x,y);
306 // Finally the carbon fiber Ring with its Wings and their
307 // stesalite inserts. They are Tube and TubeSeg shapes
309 TGeoTube *ringshape = new TGeoTube(kInnerRadiusRing,kOuterRadiusRing,
312 TGeoTube *ringinsertshape = new TGeoTube(kInnerRadiusRing+kThicknessRing,
313 kOuterRadiusRing-kThicknessRing,
314 kHalfLengthRing-kThicknessRing);
316 Double_t angleWideWing, angleWideWingThickness;
317 angleWideWing = (kWideWing/kOuterRadiusWing)*TMath::RadToDeg();
318 angleWideWingThickness = (kThicknessRing/kOuterRadiusWing)*TMath::RadToDeg();
320 TGeoTubeSeg *wingshape = new TGeoTubeSeg(kOuterRadiusRing,kOuterRadiusWing,
321 kHalfLengthRing, 0, angleWideWing);
323 TGeoTubeSeg *winginsertshape = new TGeoTubeSeg(kOuterRadiusRing,
324 kOuterRadiusWing-kThicknessRing, kHalfLengthRing-kThicknessRing,
325 angleWideWingThickness, angleWideWing-angleWideWingThickness);
328 // We have the shapes: now create the real volumes
330 TGeoMedium *medSPDcf = mgr->GetMedium("ITS_SPD shield$");
331 TGeoMedium *medSPDair = mgr->GetMedium("ITS_SPD AIR$");
332 TGeoMedium *medSPDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite
334 TGeoVolume *centralshield = new TGeoVolume("SPDcentralshield",
335 centralshape,medSPDcf);
336 centralshield->SetVisibility(kTRUE);
337 centralshield->SetLineColor(7);
338 centralshield->SetLineWidth(1);
340 TGeoVolume *centralairshield = new TGeoVolume("SPDcentralairshield",
341 centralairshape,medSPDair);
342 centralairshield->SetVisibility(kTRUE);
343 centralairshield->SetLineColor(5); // Yellow
344 centralairshield->SetLineWidth(1);
345 centralairshield->SetFillColor(centralairshield->GetLineColor());
346 centralairshield->SetFillStyle(4090); // 90% transparent
348 TGeoVolume *centralomega = new TGeoVolume("SPDcentralomega",
349 centralomegashape,medSPDcf);
350 centralomega->SetVisibility(kTRUE);
351 centralomega->SetLineColor(7);
352 centralomega->SetLineWidth(1);
354 centralairshield->AddNode(centralomega,1,0);
355 centralshield->AddNode(centralairshield,1,0);
357 TGeoVolume *endcapshield = new TGeoVolume("SPDendcapshield",
358 endcapshape,medSPDcf);
359 endcapshield->SetVisibility(kTRUE);
360 endcapshield->SetLineColor(7);
361 endcapshield->SetLineWidth(1);
363 TGeoVolume *endcapairshield = new TGeoVolume("SPDendcapairshield",
364 endcapairshape,medSPDair);
365 endcapairshield->SetVisibility(kTRUE);
366 endcapairshield->SetLineColor(5); // Yellow
367 endcapairshield->SetLineWidth(1);
368 endcapairshield->SetFillColor(endcapairshield->GetLineColor());
369 endcapairshield->SetFillStyle(4090); // 90% transparent
371 TGeoVolume *endcapomega = new TGeoVolume("SPDendcapomega",
372 endcapomegashape,medSPDcf);
373 endcapomega->SetVisibility(kTRUE);
374 endcapomega->SetLineColor(7);
375 endcapomega->SetLineWidth(1);
377 endcapairshield->AddNode(endcapomega,1,0);
378 endcapshield->AddNode(endcapairshield,1,0);
380 TGeoVolume *vC1 = new TGeoVolume("SPDconeshieldV1",sC1,medSPDcf);
381 vC1->SetVisibility(kTRUE);
382 vC1->SetLineColor(7);
383 vC1->SetLineWidth(1);
385 TGeoVolume *vCh1 = new TGeoVolume("SPDconeshieldH1",sCh1,medSPDair);
387 vCh1->SetVisibility(kTRUE);
388 vCh1->SetLineColor(5); // Yellow
389 vCh1->SetLineWidth(1);
390 vCh1->SetFillColor(vCh1->GetLineColor());
391 vCh1->SetFillStyle(4090); // 90% transparent
393 vC1->AddNode(vCh1,1,0);
395 TGeoVolume *vC2 = new TGeoVolume("SPDconeshieldV2",sC2,medSPDcf);
397 vC2->SetVisibility(kTRUE);
398 vC2->SetLineColor(7);
399 vC2->SetLineWidth(1);
401 TGeoVolume *vCh2 = new TGeoVolume("SPDconeshieldH2",sCh2,medSPDair);
403 vCh2->SetVisibility(kTRUE);
404 vCh2->SetLineColor(5); // Yellow
405 vCh2->SetLineWidth(1);
406 vCh2->SetFillColor(vCh2->GetLineColor());
407 vCh2->SetFillStyle(4090); // 90% transparent
409 vC2->AddNode(vCh2,1,0);
411 TGeoVolume *ring = new TGeoVolume("SPDshieldring",ringshape,medSPDcf);
412 ring->SetVisibility(kTRUE);
413 ring->SetLineColor(7);
414 ring->SetLineWidth(1);
416 TGeoVolume *ringinsert = new TGeoVolume("SPDshieldringinsert",
417 ringinsertshape,medSPDste);
418 ringinsert->SetVisibility(kTRUE);
419 ringinsert->SetLineColor(3); // Green
420 // ringinsert->SetLineWidth(1);
421 ringinsert->SetFillColor(ringinsert->GetLineColor());
422 ringinsert->SetFillStyle(4010); // 10% transparent
424 ring->AddNode(ringinsert,1,0);
426 TGeoVolume *wing = new TGeoVolume("SPDshieldringwing",wingshape,medSPDcf);
427 wing->SetVisibility(kTRUE);
428 wing->SetLineColor(7);
429 wing->SetLineWidth(1);
431 TGeoVolume *winginsert = new TGeoVolume("SPDshieldringinsert",
432 winginsertshape,medSPDste);
433 winginsert->SetVisibility(kTRUE);
434 winginsert->SetLineColor(3); // Green
435 // winginsert->SetLineWidth(1);
436 winginsert->SetFillColor(winginsert->GetLineColor());
437 winginsert->SetFillStyle(4010); // 10% transparent
439 wing->AddNode(winginsert,1,0);
442 // Add all volumes in the assembly
443 vM->AddNode(centralshield,1,0);
444 vM->AddNode(centralshield,2,new TGeoRotation("",180,0,0));
446 vM->AddNode(endcapshield,1,
447 new TGeoTranslation(0,0, kHalfLengthCentral+kHalfLengthEndCap));
448 vM->AddNode(endcapshield,2,
449 new TGeoTranslation(0,0,-kHalfLengthCentral-kHalfLengthEndCap));
450 vM->AddNode(endcapshield,3,new TGeoCombiTrans(
451 0, 0, kHalfLengthCentral+kHalfLengthEndCap,
452 new TGeoRotation("",180,0,0) ) );
453 vM->AddNode(endcapshield,4,new TGeoCombiTrans(
454 0, 0,-kHalfLengthCentral-kHalfLengthEndCap,
455 new TGeoRotation("",180,0,0) ) );
457 for (Int_t i=0; i<10; i++) {
458 Double_t thetaC12 = kTheta*TMath::RadToDeg();
459 vM->AddNode(vC1,2*i+1, new TGeoCombiTrans(
460 0, 0, kHalfLengthCentral+2*kHalfLengthEndCap+kHalfLengthCone,
461 new TGeoRotation("",0, 0,i*thetaC12) ) );
462 vM->AddNode(vC1,2*i+2, new TGeoCombiTrans(
463 0, 0, -kHalfLengthCentral-2*kHalfLengthEndCap-kHalfLengthCone,
464 new TGeoRotation("",0,180,i*thetaC12) ) );
465 vM->AddNode(vC2,2*i+1, new TGeoCombiTrans(
466 0, 0, kHalfLengthCentral+2*kHalfLengthEndCap+kHalfLengthCone,
467 new TGeoRotation("",0, 0,i*thetaC12) ) );
468 vM->AddNode(vC2,2*i+2, new TGeoCombiTrans(
469 0, 0, -kHalfLengthCentral-2*kHalfLengthEndCap-kHalfLengthCone,
470 new TGeoRotation("",0,180,i*thetaC12) ) );
473 vM->AddNode(ring,1,new TGeoTranslation(0, 0,
474 kHalfLengthCentral+2*kHalfLengthEndCap+2*kHalfLengthCone
476 vM->AddNode(ring,2,new TGeoTranslation(0, 0,
477 -kHalfLengthCentral-2*kHalfLengthEndCap-2*kHalfLengthCone
480 for (Int_t i=0; i<4; i++) {
481 Double_t thetaW = kThetaWing*(2*i+1) - angleWideWing/2.;
482 vM->AddNode(wing,2*i+1,new TGeoCombiTrans(0, 0,
483 kHalfLengthCentral+2*kHalfLengthEndCap+2*kHalfLengthCone
484 +kHalfLengthRing, new TGeoRotation("",thetaW,0,0) ));
485 vM->AddNode(wing,2*i+2,new TGeoCombiTrans(0, 0,
486 -kHalfLengthCentral-2*kHalfLengthEndCap-2*kHalfLengthCone
487 -kHalfLengthRing, new TGeoRotation("",thetaW,0,0) ));
490 // Some debugging if requested
496 // Finally put the entire shield in the mother volume
497 moth->AddNode(vM,1,0);
502 //______________________________________________________________________
503 void AliITSv11GeometrySupport::CreateSPDThermalShape(
504 Double_t ina, Double_t inb, Double_t inr,
505 Double_t oua, Double_t oub, Double_t our,
506 Double_t t, Double_t *x , Double_t *y )
509 // Creates the proper sequence of X and Y coordinates to determine
510 // the base XTru polygon for the SPD thermal shapes
513 // ina, inb : inner shape sides
514 // inr : inner radius
515 // oua, oub : outer shape sides
516 // our : outer radius
520 // x, y : coordinate vectors [24]
522 // Created: 14 Nov 2007 Mario Sitta
523 // Updated: 11 Dec 2007 Mario Sitta
525 Double_t xlocal[6],ylocal[6];
527 //Create the first inner quadrant (X > 0)
528 FillSPDXtruShape(ina,inb,inr,t,xlocal,ylocal);
529 for (Int_t i=0; i<6; i++) {
534 // Then reflex on the second quadrant (X < 0)
535 for (Int_t i=0; i<6; i++) {
540 // Now create the first outer quadrant (X > 0)
541 FillSPDXtruShape(oua,oub,our,t,xlocal,ylocal);
542 for (Int_t i=0; i<6; i++) {
547 // Finally reflex on the second quadrant (X < 0)
548 for (Int_t i=0; i<6; i++) {
556 //______________________________________________________________________
557 void AliITSv11GeometrySupport::CreateSPDOmegaShape(
558 Double_t *xin, Double_t *yin, Double_t d,
559 Double_t *x, Double_t *y)
562 // Creates the proper sequence of X and Y coordinates to determine
563 // the SPD Omega XTru polygon
566 // xin, yin : coordinates of the air volume
567 // d : Omega shape thickness
571 // x, y : coordinate vectors [48]
573 // Created: 17 Nov 2007 Mario Sitta
574 // Updated: 11 Dec 2007 Mario Sitta
575 // Updated: 20 Feb 2009 Mario Sitta New algorithm (the old one
576 // gives erroneous vertexes)
579 // This vector contains the index of those points which coincide
580 // with the corresponding points in the air shape
581 Int_t indexAir2Omega[12] = {1, 2, 5, 6, 9, 10, 11, 15, 16, 19, 20, 23};
583 // First fill those vertexes corresponding to
584 // the edges aligned to the air shape edges
585 for (Int_t j=0; j<12; j++) {
586 x[*(indexAir2Omega+j)] = xin[j];
587 y[*(indexAir2Omega+j)] = yin[j];
590 // Now get the coordinates of the first inner point
591 PointFromParallelLines(x[23],y[23],x[1],y[1],d,x[0],y[0]);
593 // Knowing this, the second internal point can be determined
594 InsidePoint(x[0],y[0],x[1],y[1],x[2],y[2],d,x[22],y[22]);
596 // The third point is now computable
597 ReflectPoint(x[1],y[1],x[2],y[2],x[22],y[22],x[21],y[21]);
600 InsidePoint(x[21],y[21],x[20],y[20],x[19],y[19],-d,x[3],y[3]);
602 ReflectPoint(x[20],y[20],x[19],y[19],x[3],y[3],x[4],y[4]);
604 InsidePoint(x[4],y[4],x[5],y[5],x[6],y[6],d,x[18],y[18]);
606 ReflectPoint(x[5],y[5],x[6],y[6],x[18],y[18],x[17],y[17]);
608 InsidePoint(x[17],y[17],x[16],y[16],x[15],y[15],-d,x[7],y[7]);
610 ReflectPoint(x[16],y[16],x[15],y[15],x[7],y[7],x[8],y[8]);
612 InsidePoint(x[8],y[8],x[9],y[9],x[10],y[10],d,x[14],y[14]);
614 // These need to be fixed explicitly
620 // Finally reflect on the negative side
621 for (Int_t i=0; i<24; i++) {
626 // Wow ! We've finished
630 //______________________________________________________________________
631 void AliITSv11GeometrySupport::FillSPDXtruShape(Double_t a, Double_t b,
632 Double_t r, Double_t t,
633 Double_t *x, Double_t *y)
636 // Creates the partial sequence of X and Y coordinates to determine
637 // the lateral part of the SPD thermal shield
640 // a, b : shape sides
645 // x, y : coordinate vectors [6]
647 // Created: 14 Nov 2007 Mario Sitta
652 x[1] = x[0] + b * TMath::Cos(t/2);
653 y[1] = y[0] - b * TMath::Sin(t/2);
655 x[2] = x[1] + a * TMath::Cos(t);
656 y[2] = y[1] - a * TMath::Sin(t);
658 x[3] = x[2] + b * TMath::Cos(3*t/2);
659 y[3] = y[2] - b * TMath::Sin(3*t/2);
661 x[4] = x[3] + a * TMath::Cos(2*t);
662 y[4] = y[3] - a * TMath::Sin(2*t);
670 //______________________________________________________________________
671 void AliITSv11GeometrySupport::PointFromParallelLines(Double_t x1, Double_t y1,
672 Double_t x2, Double_t y2, Double_t d,
673 Double_t &x, Double_t &y)
676 // Determines the X and Y of the first internal point of the Omega shape
677 // (i.e. the coordinates of a point given two parallel lines passing by
678 // two points and placed at a known distance)
681 // x1, y1 : first point
682 // x2, y2 : second point
683 // d : distance between the two lines
686 // x, y : coordinate of the point
688 // Created: 22 Feb 2009 Mario Sitta
692 <img src="ITS/doc/PointFromParallelLines.gif">
696 // The slope of the paralles lines at a distance d
699 // The parameters of the solving equation
700 // a x^2 - 2 b x + c = 0
701 Double_t a = (x1 - x2)*(x1 - x2) - d*d;
702 Double_t b = (x1 - x2)*(y1 - y2);
703 Double_t c = (y1 - y2)*(y1 - y2) - d*d;
705 // (Delta4 is Delta/4 because we use the reduced formula)
706 Double_t Delta4 = b*b - a*c;
708 // Compute the slope of the two parallel lines
709 // (one of the two possible slopes, the one with the smaller
710 // absolute value is needed)
711 if (Delta4 < 0) { // Should never happen with our data, but just to be sure
712 x = -1; // x is expected positive, so this flags an error
715 m = (b + TMath::Sqrt(Delta4))/a; // b is negative with our data
717 // Finally compute the coordinates of the point
718 x = x2 + (y1 - y2 - d)/m;
725 //______________________________________________________________________
726 void AliITSv11GeometrySupport::ReflectPoint(Double_t x1, Double_t y1,
727 Double_t x2, Double_t y2,
728 Double_t x3, Double_t y3,
729 Double_t &x, Double_t &y)
732 // Given two points (x1,y1) and (x2,y2), determines the point (x,y)
733 // lying on the line parallel to the line passing by these points,
734 // at a distance d and passing by the point (x3,y3), which is symmetric to
735 // the third point with respect to the axis of the segment delimited by
736 // the two first points.
739 // x1, y1 : first point
740 // x2, y2 : second point
741 // x3, y3 : third point
742 // d : distance between the two lines
745 // x, y : coordinate of the reflected point
747 // Created: 22 Feb 2009 Mario Sitta
751 <img src="ITS/doc/ReflectPoint.gif">
755 // The slope of the line passing by the first two points
756 Double_t k = (y2 - y1)/(x2 - x1);
758 // The middle point of the segment 1-2
759 Double_t xK = (x1 + x2)/2.;
760 Double_t yK = (y1 + y2)/2.;
762 // The intercept between the axis of the segment 1-2 and the line
763 // passing by 3 and parallel to the line passing by 1-2
764 Double_t xH = (k*k*x3 + k*(yK - y3) + xK)/(k*k + 1);
765 Double_t yH = k*(xH - x3) + y3;
767 // The point symmetric to 3 with respect to H
775 //______________________________________________________________________
776 void AliITSv11GeometrySupport::SDDCone(TGeoVolume *moth,TGeoManager *mgr)
779 // Creates the SDD support cone and cylinder geometry as a
780 // volume assembly and adds it to the mother volume
781 // (part of this code is taken or anyway inspired to SDDCone method
782 // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
785 // moth : the TGeoVolume owing the volume structure
786 // mgr : the GeoManager (default gGeoManager)
789 // Created: ??? Bjorn S. Nilsen
790 // Updated: 18 Feb 2008 Mario Sitta
791 // Updated: 25 Jul 2008 Mario Sitta SDDCarbonFiberCone simpler
793 // Technical data are taken from: "Supporto Generale Settore SDD"
794 // (technical drawings ALR-0816/1-B), "Supporto Globale Settore SDD"
795 // (technical drawings ALR-0816/2A, ALR-0816/2B, ALR-0816/2C, ALR-0816/2D),
796 // private communication with B. Giraudo
798 // Dimensions of the Central cylinder and flanges
799 const Double_t kCylinderHalfLength = (790.0/2)*fgkmm;
800 const Double_t kCylinderInnerR = (210.0/2)*fgkmm;
801 const Double_t kCylinderOuterR = (231.0/2)*fgkmm;
802 const Double_t kFlangeHalfLength = ( 15.0/2)*fgkmm;
803 const Double_t kFlangeInnerR = (210.5/2)*fgkmm;
804 const Double_t kFlangeOuterR = (230.5/2)*fgkmm;
805 const Double_t kInsertoHalfLength =
806 kCylinderHalfLength - 2*kFlangeHalfLength;
807 // const Double_t kCFThickness = kFlangeInnerR - kCylinderInnerR;
808 const Double_t kBoltDiameter = 6.0*fgkmm; // M6 screw
809 const Double_t kBoltDepth = 6.0*fgkmm; // In the flange
810 const Double_t kBoltRadius = (220.0/2)*fgkmm; // Radius in flange
811 const Double_t kThetaBolt = 30.0*fgkDegree;
812 const Int_t kNBolts = (Int_t)(360.0/kThetaBolt);
813 // Dimensions of the Cone
814 const Double_t kConeROutMin = (540.0/2)*fgkmm;
815 const Double_t kConeROutMax = (560.0/2)*fgkmm;
816 const Double_t kConeRCurv = 10.0*fgkmm; // Radius of curvature
817 const Double_t kConeRinMin = (210.0/2)*fgkmm;
818 // const Double_t kConeRinMax = (216.0/2)*fgkmm;
819 const Double_t kConeRinCylinder = (231.0/2)*fgkmm;
820 const Double_t kConeZCylinder = 192.0*fgkmm;
821 const Double_t kConeZOuterMilled = 23.0*fgkmm;
822 const Double_t kConeDZin = 15.0*fgkmm; // ???
823 const Double_t kConeThickness = 10.0*fgkmm; // Rohacell + Carb.Fib.
824 const Double_t kConeTheta = 45.0*fgkDegree; // SDD cone angle
825 const Double_t kSinConeTheta =
826 TMath::Sin(kConeTheta*TMath::DegToRad());
827 const Double_t kCosConeTheta =
828 TMath::Cos(kConeTheta*TMath::DegToRad());
829 const Double_t kTanConeTheta =
830 TMath::Tan(kConeTheta*TMath::DegToRad());
831 // Dimensions of the Cone Inserts
832 const Double_t kConeCFThickness = 1.5*fgkmm; // Carbon fiber thickness
833 // Dimensions of the Cone Holes
834 const Double_t kHole1RMin = (450.0/2)*fgkmm;
835 const Double_t kHole1RMax = (530.0/2)*fgkmm;
836 const Double_t kHole2RMin = (280.0/2)*fgkmm;
837 const Double_t kHole2RMax = (375.0/2)*fgkmm;
838 const Double_t kHole1Phi = 25.0*fgkDegree;
839 const Double_t kHole2Phi = 50.0*fgkDegree;
840 const Double_t kHole3RMin = 205.0*fgkmm;
841 const Double_t kHole3DeltaR = 15*fgkmm;
842 const Double_t kHole3Width = 30*fgkmm;
843 const Int_t kNHole3 = 6 ;
844 const Double_t kHole4RMin = 116.0*fgkmm;
845 const Double_t kHole4DeltaR = 15*fgkmm;
846 const Double_t kHole4Width = 30*fgkmm;
847 // const Int_t kNHole4 = 3 ;
850 Double_t x, y, z, t, dza, rmin, rmax;
853 // Recover the needed materials
854 TGeoMedium *medSDDcf = mgr->GetMedium("ITS_SDD C (M55J)$");
855 TGeoMedium *medSDDair = mgr->GetMedium("ITS_SDD AIR$");
856 TGeoMedium *medSDDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite
857 TGeoMedium *medSDDroh = mgr->GetMedium("ITS_ROHACELL$");
858 TGeoMedium *medSDDss = mgr->GetMedium("ITS_INOX$");
860 // First define the geometrical shapes
862 // Central cylinder with its internal foam and the lateral flanges:
863 // a carbon fiber Tube which contains a rohacell Tube and two
865 TGeoTube *cylindershape = new TGeoTube(kCylinderInnerR,kCylinderOuterR,
866 kCylinderHalfLength);
868 TGeoTube *insertoshape = new TGeoTube(kFlangeInnerR,kFlangeOuterR,
871 TGeoTube *flangeshape = new TGeoTube(kFlangeInnerR,kFlangeOuterR,
874 // The flange bolt: it is a Tube
875 TGeoTube *boltshape = new TGeoTube(0.0, 0.5*kBoltDiameter, 0.5*kBoltDepth);
877 // Debug if requested
879 cylindershape->InspectShape();
880 insertoshape->InspectShape();
881 flangeshape->InspectShape();
882 boltshape->InspectShape();
886 // We have the shapes: now create the real volumes
888 TGeoVolume *cfcylinder = new TGeoVolume("SDDCarbonFiberCylinder",
889 cylindershape,medSDDcf);
890 cfcylinder->SetVisibility(kTRUE);
891 cfcylinder->SetLineColor(4); // Blue
892 cfcylinder->SetLineWidth(1);
893 cfcylinder->SetFillColor(cfcylinder->GetLineColor());
894 cfcylinder->SetFillStyle(4000); // 0% transparent
896 TGeoVolume *foamcylinder = new TGeoVolume("SDDFoamCylinder",
897 insertoshape,medSDDroh);
898 foamcylinder->SetVisibility(kTRUE);
899 foamcylinder->SetLineColor(3); // Green
900 foamcylinder->SetLineWidth(1);
901 foamcylinder->SetFillColor(foamcylinder->GetLineColor());
902 foamcylinder->SetFillStyle(4050); // 50% transparent
904 TGeoVolume *flangecylinder = new TGeoVolume("SDDFlangeCylinder",
905 flangeshape,medSDDste);
906 flangecylinder->SetVisibility(kTRUE);
907 flangecylinder->SetLineColor(2); // Red
908 flangecylinder->SetLineWidth(1);
909 flangecylinder->SetFillColor(flangecylinder->GetLineColor());
910 flangecylinder->SetFillStyle(4050); // 50% transparent
912 TGeoVolume *bolt = new TGeoVolume("SDDFlangeBolt",boltshape,medSDDss);
913 bolt->SetVisibility(kTRUE);
914 bolt->SetLineColor(1); // Black
915 bolt->SetLineWidth(1);
916 bolt->SetFillColor(bolt->GetLineColor());
917 bolt->SetFillStyle(4050); // 50% transparent
919 // Mount up the cylinder
920 for(Int_t i=0; i<kNBolts; i++){
922 x = kBoltRadius*CosD(t);
923 y = kBoltRadius*SinD(t);
924 z = kFlangeHalfLength-kBoltDepth;
925 flangecylinder->AddNode(bolt, i+1, new TGeoTranslation("",x,y,z));
928 cfcylinder->AddNode(foamcylinder,1,0);
929 cfcylinder->AddNode(flangecylinder,1,
930 new TGeoTranslation(0, 0, kInsertoHalfLength+kFlangeHalfLength));
931 cfcylinder->AddNode(flangecylinder,2,new TGeoCombiTrans(
932 0, 0, -kInsertoHalfLength-kFlangeHalfLength,
933 new TGeoRotation("",0,180,0) ) );
936 // SDD Support Cone with its internal inserts: a carbon fiber Pcon
937 // with holes which contains a stesalite Pcon which on turn contains a
940 dza = kConeThickness/kSinConeTheta-(kConeROutMax-kConeROutMin)/kTanConeTheta;
942 TGeoPcon *coneshape = new TGeoPcon(0.0, 360.0, 10);
944 coneshape->Z(0) = 0.0;
945 coneshape->Rmin(0) = kConeROutMin;
946 coneshape->Rmax(0) = kConeROutMax;
948 coneshape->Z(1) = kConeZOuterMilled - dza;
949 coneshape->Rmin(1) = coneshape->GetRmin(0);
950 coneshape->Rmax(1) = coneshape->GetRmax(0);
952 coneshape->Z(2) = kConeZOuterMilled;
953 coneshape->Rmax(2) = coneshape->GetRmax(0);
955 RadiusOfCurvature(kConeRCurv,0.,coneshape->GetZ(1),
956 coneshape->GetRmin(1),kConeTheta,z,rmin);
958 coneshape->Rmin(3) = rmin;
960 coneshape->Rmin(2) = RminFrom2Points(coneshape,3,1,coneshape->GetZ(2));
962 RadiusOfCurvature(kConeRCurv,0.,coneshape->GetZ(2),
963 coneshape->GetRmax(2),kConeTheta,z,rmax);
965 coneshape->Rmax(4) = rmax;
966 coneshape->Rmin(4) = RminFromZpCone(coneshape,3,kConeTheta,
967 coneshape->GetZ(4),0.0);
969 coneshape->Rmax(3) = RmaxFrom2Points(coneshape,4,2,coneshape->GetZ(3));
971 coneshape->Z(6) = kConeZCylinder - kConeDZin;
973 RadiusOfCurvature(kConeRCurv,90.0,coneshape->GetZ(6),0.0,
974 90.0-kConeTheta,z,rmin);
976 coneshape->Rmin(5) = RminFromZpCone(coneshape,3,kConeTheta,z);
977 coneshape->Rmax(5) = RmaxFromZpCone(coneshape,4,kConeTheta,z);
979 RadiusOfCurvature(kConeRCurv,90.-kConeTheta,
980 0.0,coneshape->Rmin(5),90.0,z,rmin);
981 coneshape->Rmin(6) = rmin;
982 coneshape->Rmax(6) = RmaxFromZpCone(coneshape,4,kConeTheta,
985 coneshape->Z(7) = coneshape->GetZ(6);
986 coneshape->Rmin(7) = kConeRinMin;
987 coneshape->Rmax(7) = coneshape->GetRmax(6);
989 coneshape->Rmin(8) = kConeRinMin;
991 RadiusOfCurvature(kConeRCurv,90.0,kConeZCylinder,kConeRinCylinder,
992 90.0-kConeTheta,z,rmax);
994 coneshape->Rmax(8) = rmax;
996 coneshape->Z(9) = kConeZCylinder;
997 coneshape->Rmin(9) = kConeRinMin;
998 coneshape->Rmax(9) = kConeRinCylinder;
1001 // SDD Cone Insert: another Pcon
1002 Double_t x0, y0, x1, y1, x2, y2;
1003 TGeoPcon *coneinsertshape = new TGeoPcon(0.0, 360.0, 9);
1005 coneinsertshape->Z(0) = coneshape->GetZ(0) + kConeCFThickness;
1006 coneinsertshape->Rmin(0) = coneshape->GetRmin(0) + kConeCFThickness;
1007 coneinsertshape->Rmax(0) = coneshape->GetRmax(0) - kConeCFThickness;
1009 x0 = coneshape->GetZ(0); y0 = coneshape->GetRmin(0);
1010 x1 = coneshape->GetZ(1); y1 = coneshape->GetRmin(1);
1011 x2 = coneshape->GetZ(2); y2 = coneshape->GetRmin(2);
1012 InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin);
1013 coneinsertshape->Z(1) = z;
1014 coneinsertshape->Rmin(1) = rmin;
1015 coneinsertshape->Rmax(1) = coneinsertshape->GetRmax(0);
1017 x0 = coneshape->GetZ(1); y0 = coneshape->GetRmax(1);
1018 x1 = coneshape->GetZ(2); y1 = coneshape->GetRmax(2);
1019 x2 = coneshape->GetZ(3); y2 = coneshape->GetRmax(3);
1020 InsidePoint(x0, y0, x1, y1, x2, y2, -kConeCFThickness, z, rmax);
1021 coneinsertshape->Z(2) = z;
1022 coneinsertshape->Rmax(2) = rmax;
1024 x0 = coneshape->GetZ(2); y0 = coneshape->GetRmin(2);
1025 x1 = coneshape->GetZ(3); y1 = coneshape->GetRmin(3);
1026 x2 = coneshape->GetZ(4); y2 = coneshape->GetRmin(4);
1027 InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin);
1028 coneinsertshape->Z(3) = z;
1029 coneinsertshape->Rmin(3) = rmin;
1031 x0 = coneinsertshape->GetZ(1); y0 = coneinsertshape->GetRmin(1);
1032 x1 = coneinsertshape->GetZ(3); y1 = coneinsertshape->GetRmin(3);
1033 coneinsertshape->Rmin(2) = Yfrom2Points(x0, y0, x1, y1,
1034 coneinsertshape->Z(2));
1036 x0 = coneshape->GetZ(3); y0 = coneshape->GetRmax(3);
1037 x1 = coneshape->GetZ(4); y1 = coneshape->GetRmax(4);
1038 x2 = coneshape->GetZ(5); y2 = coneshape->GetRmax(5);
1039 InsidePoint(x0, y0, x1, y1, x2, y2, -kConeCFThickness, z, rmax);
1040 coneinsertshape->Z(4) = z;
1041 coneinsertshape->Rmax(4) = rmax;
1043 x0 = coneinsertshape->GetZ(2); y0 = coneinsertshape->GetRmax(2);
1044 x1 = coneinsertshape->GetZ(4); y1 = coneinsertshape->GetRmax(4);
1045 coneinsertshape->Rmax(3) = Yfrom2Points(x0, y0, x1, y1,
1046 coneinsertshape->Z(3));
1048 x0 = coneshape->GetZ(4); y0 = coneshape->GetRmin(4);
1049 x1 = coneshape->GetZ(5); y1 = coneshape->GetRmin(5);
1050 x2 = coneshape->GetZ(6); y2 = coneshape->GetRmin(6);
1051 InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin);
1052 coneinsertshape->Z(5) = z;
1053 coneinsertshape->Rmin(5) = rmin;
1054 coneinsertshape->Rmax(5) = coneinsertshape->GetRmax(4) -
1055 kTanConeTheta*(coneinsertshape->GetZ(5) - coneinsertshape->GetZ(4));
1057 x0 = coneinsertshape->GetZ(3); y0 = coneinsertshape->GetRmin(3);
1058 x1 = coneinsertshape->GetZ(5); y1 = coneinsertshape->GetRmin(5);
1059 coneinsertshape->Rmin(4) = Yfrom2Points(x0, y0, x1, y1,
1060 coneinsertshape->Z(4));
1062 x0 = coneshape->GetZ(5); y0 = coneshape->GetRmin(5);
1063 x1 = coneshape->GetZ(6); y1 = coneshape->GetRmin(6);
1064 x2 = coneshape->GetZ(7); y2 = coneshape->GetRmin(7);
1065 InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin);
1066 coneinsertshape->Z(6) = z;
1067 coneinsertshape->Rmin(6) = rmin;
1068 coneinsertshape->Rmax(6) = coneinsertshape->GetRmax(4) -
1069 kTanConeTheta*(coneinsertshape->GetZ(6) - coneinsertshape->GetZ(4));
1071 coneinsertshape->Z(7) = coneinsertshape->GetZ(6);
1072 coneinsertshape->Rmin(7) = coneshape->GetRmin(7) + kConeCFThickness;
1073 coneinsertshape->Rmax(7) = coneinsertshape->GetRmax(6);
1075 coneinsertshape->Z(8) = coneshape->GetZ(9) - kConeCFThickness;
1076 coneinsertshape->Rmin(8) = coneinsertshape->GetRmin(7);
1077 coneinsertshape->Rmax(8) = coneinsertshape->GetRmax(4) -
1078 kTanConeTheta*(coneinsertshape->GetZ(8) - coneinsertshape->GetZ(4));
1080 // SDD Cone Foam: another Pcon
1081 TGeoPcon *conefoamshape = new TGeoPcon(0.0, 360.0, 4);
1083 RadiusOfCurvature(kConeRCurv+kConeCFThickness,0.0,coneinsertshape->GetZ(1),
1084 coneinsertshape->GetRmin(1),kConeTheta,z,rmin);
1086 conefoamshape->Z(0) = z;
1087 conefoamshape->Rmin(0) = rmin;
1088 conefoamshape->Rmax(0) = conefoamshape->GetRmin(0);
1090 conefoamshape->Z(1) = conefoamshape->GetZ(0)+
1091 (kConeThickness-2.0*kConeCFThickness)/kSinConeTheta;
1092 conefoamshape->Rmin(1) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1093 conefoamshape->GetZ(1));
1094 conefoamshape->Rmax(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1095 conefoamshape->GetZ(1));
1097 conefoamshape->Z(2) = coneshape->GetZ(5)-kConeCFThickness;
1098 conefoamshape->Rmin(2) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1099 conefoamshape->GetZ(2));
1100 conefoamshape->Rmax(2) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1101 conefoamshape->GetZ(2));
1103 conefoamshape->Z(3) = coneinsertshape->GetZ(5)+
1104 (kConeThickness-2.0*kConeCFThickness)*kCosConeTheta;
1105 conefoamshape->Rmax(3) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1106 conefoamshape->GetZ(3));
1107 conefoamshape->Rmin(3) = conefoamshape->GetRmax(3);
1109 // SDD Cone Holes: Pcon's
1110 // A single hole volume gives an overlap with coneinsert, so
1111 // three contiguous volumes are created: one to be put in the cone foam
1112 // and two in the cone carbon fiber envelope
1113 TGeoPcon *hole1shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4);
1115 hole1shape->Rmin(0) = kHole1RMax;
1116 hole1shape->Rmax(0) = hole1shape->GetRmin(0);
1117 hole1shape->Z(0) = ZFromRminpCone(conefoamshape,0,kConeTheta,
1118 hole1shape->GetRmin(0));
1120 hole1shape->Rmax(1) = hole1shape->GetRmax(0);
1121 hole1shape->Z(1) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1122 hole1shape->GetRmax(1));
1123 hole1shape->Rmin(1) = RminFromZpCone(conefoamshape,1,kConeTheta,
1124 hole1shape->GetZ(1));
1126 hole1shape->Rmin(2) = kHole1RMin;
1127 hole1shape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1128 hole1shape->GetRmin(2));
1129 hole1shape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta,
1130 hole1shape->GetZ(2));
1132 hole1shape->Rmin(3) = hole1shape->GetRmin(2);
1133 hole1shape->Rmax(3) = hole1shape->GetRmin(3);
1134 hole1shape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1135 hole1shape->GetRmax(3));
1137 TGeoPcon *hole11shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4);
1139 hole11shape->Rmin(0) = kHole1RMax;
1140 hole11shape->Rmax(0) = hole11shape->GetRmin(0);
1141 hole11shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta,
1142 hole11shape->GetRmin(0));
1144 hole11shape->Rmax(1) = hole11shape->GetRmax(0);
1145 hole11shape->Z(1) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1146 hole11shape->GetRmax(1));
1147 hole11shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta,
1148 hole11shape->GetZ(1));
1150 hole11shape->Rmin(2) = kHole1RMin;
1151 hole11shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta,
1152 hole11shape->GetRmin(2));
1153 hole11shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1154 hole11shape->GetZ(2));
1156 hole11shape->Rmin(3) = hole11shape->GetRmin(2);
1157 hole11shape->Rmax(3) = hole11shape->GetRmin(3);
1158 hole11shape->Z(3) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1159 hole11shape->GetRmax(3));
1161 TGeoPcon *hole12shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4);
1163 hole12shape->Rmin(0) = kHole1RMax;
1164 hole12shape->Rmax(0) = hole12shape->GetRmin(0);
1165 hole12shape->Z(0) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1166 hole12shape->GetRmin(0));
1168 hole12shape->Rmax(1) = hole12shape->GetRmax(0);
1169 hole12shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1170 hole12shape->GetRmax(1));
1171 hole12shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1172 hole12shape->GetZ(1));
1174 hole12shape->Rmin(2) = kHole1RMin;
1175 hole12shape->Z(2) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1176 hole12shape->GetRmin(2));
1177 hole12shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta,
1178 hole12shape->GetZ(2));
1180 hole12shape->Rmin(3) = hole12shape->GetRmin(2);
1181 hole12shape->Rmax(3) = hole12shape->GetRmin(3);
1182 hole12shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1183 hole12shape->GetRmax(3));
1186 TGeoPcon *hole2shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4);
1188 hole2shape->Rmin(0) = kHole2RMax;
1189 hole2shape->Rmax(0) = hole2shape->GetRmin(0);
1190 hole2shape->Z(0) = ZFromRminpCone(conefoamshape,0,kConeTheta,
1191 hole2shape->GetRmin(0));
1193 hole2shape->Rmax(1) = hole2shape->GetRmax(0);
1194 hole2shape->Z(1) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1195 hole2shape->GetRmax(1));
1196 hole2shape->Rmin(1) = RminFromZpCone(conefoamshape,1,kConeTheta,
1197 hole2shape->GetZ(1));
1199 hole2shape->Rmin(2) = kHole2RMin;
1200 hole2shape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1201 hole2shape->GetRmin(2));
1202 hole2shape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta,
1203 hole2shape->GetZ(2));
1205 hole2shape->Rmin(3) = hole2shape->GetRmin(2);
1206 hole2shape->Rmax(3) = hole2shape->GetRmin(3);
1207 hole2shape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1208 hole2shape->GetRmax(3));
1210 TGeoPcon *hole21shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4);
1212 hole21shape->Rmin(0) = kHole2RMax;
1213 hole21shape->Rmax(0) = hole21shape->GetRmin(0);
1214 hole21shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta,
1215 hole21shape->GetRmin(0));
1217 hole21shape->Rmax(1) = hole21shape->GetRmax(0);
1218 hole21shape->Z(1) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1219 hole21shape->GetRmax(1));
1220 hole21shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta,
1221 hole21shape->GetZ(1));
1223 hole21shape->Rmin(2) = kHole2RMin;
1224 hole21shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta,
1225 hole21shape->GetRmin(2));
1226 hole21shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1227 hole21shape->GetZ(2));
1229 hole21shape->Rmin(3) = hole21shape->GetRmin(2);
1230 hole21shape->Rmax(3) = hole21shape->GetRmin(3);
1231 hole21shape->Z(3) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1232 hole21shape->GetRmax(3));
1234 TGeoPcon *hole22shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4);
1236 hole22shape->Rmin(0) = kHole2RMax;
1237 hole22shape->Rmax(0) = hole22shape->GetRmin(0);
1238 hole22shape->Z(0) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1239 hole22shape->GetRmin(0));
1241 hole22shape->Rmax(1) = hole22shape->GetRmax(0);
1242 hole22shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1243 hole22shape->GetRmax(1));
1244 hole22shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1245 hole22shape->GetZ(1));
1247 hole22shape->Rmin(2) = kHole2RMin;
1248 hole22shape->Z(2) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1249 hole22shape->GetRmin(2));
1250 hole22shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta,
1251 hole22shape->GetZ(2));
1253 hole22shape->Rmin(3) = hole22shape->GetRmin(2);
1254 hole22shape->Rmax(3) = hole22shape->GetRmin(3);
1255 hole22shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1256 hole22shape->GetRmax(3));
1260 holePhi = (kHole3Width/kHole3RMin)*TMath::RadToDeg();
1262 TGeoPcon *hole3shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1264 hole3shape->Rmin(0) = kHole3RMin + kHole3DeltaR;
1265 hole3shape->Rmax(0) = hole3shape->GetRmin(0);
1266 hole3shape->Z(0) = ZFromRminpCone(conefoamshape,0,kConeTheta,
1267 hole3shape->GetRmin(0));
1269 hole3shape->Rmax(1) = hole3shape->GetRmax(0);
1270 hole3shape->Z(1) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1271 hole3shape->GetRmax(1));
1272 hole3shape->Rmin(1) = RminFromZpCone(conefoamshape,1,kConeTheta,
1273 hole3shape->GetZ(1));
1275 hole3shape->Rmin(2) = kHole3RMin;
1276 hole3shape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1277 hole3shape->GetRmin(2));
1278 hole3shape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta,
1279 hole3shape->GetZ(2));
1281 hole3shape->Rmin(3) = hole3shape->GetRmin(2);
1282 hole3shape->Rmax(3) = hole3shape->GetRmin(3);
1283 hole3shape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1284 hole3shape->GetRmax(3));
1286 TGeoPcon *hole31shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1288 hole31shape->Rmin(0) = kHole3RMin + kHole3DeltaR;
1289 hole31shape->Rmax(0) = hole31shape->GetRmin(0);
1290 hole31shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta,
1291 hole31shape->GetRmin(0));
1293 hole31shape->Rmax(1) = hole31shape->GetRmax(0);
1294 hole31shape->Z(1) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1295 hole31shape->GetRmax(1));
1296 hole31shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta,
1297 hole31shape->GetZ(1));
1299 hole31shape->Rmin(2) = kHole3RMin;
1300 hole31shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta,
1301 hole31shape->GetRmin(2));
1302 hole31shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1303 hole31shape->GetZ(2));
1305 hole31shape->Rmin(3) = hole31shape->GetRmin(2);
1306 hole31shape->Rmax(3) = hole31shape->GetRmin(3);
1307 hole31shape->Z(3) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1308 hole31shape->GetRmax(3));
1310 TGeoPcon *hole32shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1312 hole32shape->Rmin(0) = kHole3RMin + kHole3DeltaR;
1313 hole32shape->Rmax(0) = hole32shape->GetRmin(0);
1314 hole32shape->Z(0) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1315 hole32shape->GetRmin(0));
1317 hole32shape->Rmax(1) = hole32shape->GetRmax(0);
1318 hole32shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1319 hole32shape->GetRmax(1));
1320 hole32shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1321 hole32shape->GetZ(1));
1323 hole32shape->Rmin(2) = kHole3RMin;
1324 hole32shape->Z(2) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1325 hole32shape->GetRmin(2));
1326 hole32shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta,
1327 hole32shape->GetZ(2));
1329 hole32shape->Rmin(3) = hole32shape->GetRmin(2);
1330 hole32shape->Rmax(3) = hole32shape->GetRmin(3);
1331 hole32shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1332 hole32shape->GetRmax(3));
1335 holePhi = (kHole4Width/kHole4RMin)*TMath::RadToDeg();
1337 TGeoPcon *hole4shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1339 hole4shape->Rmin(0) = kHole4RMin + kHole4DeltaR;
1340 hole4shape->Rmax(0) = hole4shape->GetRmin(0);
1341 hole4shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta,
1342 hole4shape->GetRmin(0));
1344 hole4shape->Rmax(1) = hole4shape->GetRmax(0);
1345 hole4shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1346 hole4shape->GetRmax(1));
1347 hole4shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta,
1348 hole4shape->GetZ(1));
1350 hole4shape->Rmin(2) = kHole4RMin;
1351 hole4shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta,
1352 hole4shape->GetRmin(2));
1353 hole4shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta,
1354 hole4shape->GetZ(2));
1356 hole4shape->Rmin(3) = hole4shape->GetRmin(2);
1357 hole4shape->Rmax(3) = hole4shape->GetRmin(3);
1358 hole4shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1359 hole4shape->GetRmax(3));
1361 // Debug if requested
1363 coneshape->InspectShape();
1364 coneinsertshape->InspectShape();
1365 conefoamshape->InspectShape();
1366 hole1shape->InspectShape();
1367 hole2shape->InspectShape();
1368 hole3shape->InspectShape();
1369 hole4shape->InspectShape();
1373 // We have the shapes: now create the real volumes
1375 TGeoVolume *cfcone = new TGeoVolume("SDDCarbonFiberCone",
1376 coneshape,medSDDcf);
1377 cfcone->SetVisibility(kTRUE);
1378 cfcone->SetLineColor(4); // Blue
1379 cfcone->SetLineWidth(1);
1380 cfcone->SetFillColor(cfcone->GetLineColor());
1381 cfcone->SetFillStyle(4000); // 0% transparent
1383 TGeoVolume *cfconeinsert = new TGeoVolume("SDDCarbonFiberConeInsert",
1384 coneinsertshape,medSDDste);
1385 cfconeinsert->SetVisibility(kTRUE);
1386 cfconeinsert->SetLineColor(2); // Red
1387 cfconeinsert->SetLineWidth(1);
1388 cfconeinsert->SetFillColor(cfconeinsert->GetLineColor());
1389 cfconeinsert->SetFillStyle(4050); // 50% transparent
1391 TGeoVolume *cfconefoam = new TGeoVolume("SDDCarbonFiberConeFoam",
1392 conefoamshape,medSDDroh);
1393 cfconefoam->SetVisibility(kTRUE);
1394 cfconefoam->SetLineColor(7); // Light blue
1395 cfconefoam->SetLineWidth(1);
1396 cfconefoam->SetFillColor(cfconefoam->GetLineColor());
1397 cfconefoam->SetFillStyle(4050); // 50% transparent
1399 TGeoVolume *hole1 = new TGeoVolume("SDDCableHole1",
1400 hole1shape,medSDDair);
1401 hole1->SetVisibility(kTRUE);
1402 hole1->SetLineColor(5); // Yellow
1403 hole1->SetLineWidth(1);
1404 hole1->SetFillColor(hole1->GetLineColor());
1405 hole1->SetFillStyle(4090); // 90% transparent
1407 TGeoVolume *hole11 = new TGeoVolume("SDDCableHole11",
1408 hole11shape,medSDDair);
1409 hole11->SetVisibility(kTRUE);
1410 hole11->SetLineColor(5); // Yellow
1411 hole11->SetLineWidth(1);
1412 hole11->SetFillColor(hole11->GetLineColor());
1413 hole11->SetFillStyle(4090); // 90% transparent
1415 TGeoVolume *hole12 = new TGeoVolume("SDDCableHole12",
1416 hole12shape,medSDDair);
1417 hole12->SetVisibility(kTRUE);
1418 hole12->SetLineColor(5); // Yellow
1419 hole12->SetLineWidth(1);
1420 hole12->SetFillColor(hole12->GetLineColor());
1421 hole12->SetFillStyle(4090); // 90% transparent
1423 TGeoVolume *hole2 = new TGeoVolume("SDDCableHole2",
1424 hole2shape,medSDDair);
1425 hole2->SetVisibility(kTRUE);
1426 hole2->SetLineColor(5); // Yellow
1427 hole2->SetLineWidth(1);
1428 hole2->SetFillColor(hole2->GetLineColor());
1429 hole2->SetFillStyle(4090); // 90% transparent
1431 TGeoVolume *hole21 = new TGeoVolume("SDDCableHole21",
1432 hole21shape,medSDDair);
1433 hole21->SetVisibility(kTRUE);
1434 hole21->SetLineColor(5); // Yellow
1435 hole21->SetLineWidth(1);
1436 hole21->SetFillColor(hole21->GetLineColor());
1437 hole21->SetFillStyle(4090); // 90% transparent
1439 TGeoVolume *hole22 = new TGeoVolume("SDDCableHole22",
1440 hole22shape,medSDDair);
1441 hole22->SetVisibility(kTRUE);
1442 hole22->SetLineColor(5); // Yellow
1443 hole22->SetLineWidth(1);
1444 hole22->SetFillColor(hole22->GetLineColor());
1445 hole22->SetFillStyle(4090); // 90% transparent
1447 TGeoVolume *hole3 = new TGeoVolume("SDDCableHole3",
1448 hole3shape,medSDDair);
1449 hole3->SetVisibility(kTRUE);
1450 hole3->SetLineColor(5); // Yellow
1451 hole3->SetLineWidth(1);
1452 hole3->SetFillColor(hole3->GetLineColor());
1453 hole3->SetFillStyle(4090); // 90% transparent
1455 TGeoVolume *hole31 = new TGeoVolume("SDDCableHole31",
1456 hole31shape,medSDDair);
1457 hole31->SetVisibility(kTRUE);
1458 hole31->SetLineColor(5); // Yellow
1459 hole31->SetLineWidth(1);
1460 hole31->SetFillColor(hole31->GetLineColor());
1461 hole31->SetFillStyle(4090); // 90% transparent
1463 TGeoVolume *hole32 = new TGeoVolume("SDDCableHole32",
1464 hole32shape,medSDDair);
1465 hole32->SetVisibility(kTRUE);
1466 hole32->SetLineColor(5); // Yellow
1467 hole32->SetLineWidth(1);
1468 hole32->SetFillColor(hole32->GetLineColor());
1469 hole32->SetFillStyle(4090); // 90% transparent
1471 TGeoVolume *hole4 = new TGeoVolume("SDDCableHole4",
1472 hole4shape,medSDDair);
1473 hole4->SetVisibility(kTRUE);
1474 hole4->SetLineColor(5); // Yellow
1475 hole4->SetLineWidth(1);
1476 hole4->SetFillColor(hole4->GetLineColor());
1477 hole4->SetFillStyle(4090); // 90% transparent
1480 cfconeinsert->AddNode(cfconefoam,1,0);
1482 for (Int_t i=0; i<12; i++) {
1483 Double_t phiH = i*30.0;
1484 cfconefoam->AddNode(hole1 , i+1, new TGeoRotation("", 0, 0, phiH));
1485 cfcone->AddNode(hole11, i+1, new TGeoRotation("", 0, 0, phiH));
1486 cfcone->AddNode(hole12, i+1, new TGeoRotation("", 0, 0, phiH));
1489 for (Int_t i=0; i<6; i++) {
1490 Double_t phiH = i*60.0;
1491 cfconefoam->AddNode(hole2 , i+1, new TGeoRotation("", 0, 0, phiH));
1492 cfcone->AddNode(hole21, i+1, new TGeoRotation("", 0, 0, phiH));
1493 cfcone->AddNode(hole22, i+1, new TGeoRotation("", 0, 0, phiH));
1496 for (Int_t i=0; i<kNHole3; i++) {
1497 Double_t phiH0 = 360./(Double_t)kNHole3;
1498 Double_t phiH = i*phiH0 + 0.5*phiH0;
1499 cfconefoam->AddNode(hole3 , i+1, new TGeoRotation("", phiH, 0, 0));
1500 cfcone->AddNode(hole31, i+1, new TGeoRotation("", phiH, 0, 0));
1501 cfcone->AddNode(hole32, i+1, new TGeoRotation("", phiH, 0, 0));
1504 cfcone->AddNode(cfconeinsert,1,0);
1507 for (Int_t i=0; i<kNHole4; i++) {
1508 Double_t phiH0 = 360./(Double_t)kNHole4;
1509 Double_t phiH = i*phiH0 + 0.25*phiH0;
1510 cfcone->AddNode(hole4, i+1, new TGeoRotation("", phiH, 0, 0));
1513 // Finally put everything in the mother volume
1514 moth->AddNode(cfcylinder,1,0);
1516 z = coneshape->Z(9);
1517 moth->AddNode(cfcone,1,new TGeoTranslation(0, 0, -z - kCylinderHalfLength));
1518 moth->AddNode(cfcone,2,new TGeoCombiTrans (0, 0, z + kCylinderHalfLength,
1519 new TGeoRotation("", 0, 180, 0) ));
1525 //______________________________________________________________________
1526 void AliITSv11GeometrySupport::SSDCone(TGeoVolume *moth,TGeoManager *mgr)
1529 // Creates the SSD support cone and cylinder geometry. as a
1530 // volume assembly and adds it to the mother volume
1531 // (part of this code is taken or anyway inspired to SSDCone method
1532 // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
1535 // moth : the TGeoVolume owing the volume structure
1536 // mgr : the GeoManager (default gGeoManager)
1539 // Created: ??? Bjorn S. Nilsen
1540 // Updated: 08 Mar 2008 Mario Sitta
1542 // Technical data are taken from: "ITS Supporto Generale" (technical
1543 // drawings ALR3-0743/1, ALR3-0743/1A and ALR3-0743/1B), "Supporto Generale
1544 // Settore SSD" (technical drawings ALR3-0743/2A and ALR3-0743/2E), private
1545 // communication with B. Giraudo
1547 // Updated: 11 Apr 2008 Mario Sitta
1548 // Measures from drawings give overlaps with SPD thermal shield wings,
1549 // so the terminal part of the SSD cone was reduced
1551 // Updated: 30 Mar 2010 Mario Sitta
1552 // Following M. van Leeuwen's suggestion on material budget, the thickness
1553 // of the carbon fiber cylinder was increased from 0.6 to 0.625mm
1555 // Dimensions of the Central cylinder and flanges
1556 const Double_t kCylinderHalfLength = (1144.0/2) *fgkmm;
1557 const Double_t kCylinderOuterRadius = ( 595.0/2) *fgkmm;
1558 const Double_t kCylinderThickness = 0.625*fgkmm;
1559 const Double_t kFoamHalfLength = (1020.0/2) *fgkmm;
1560 const Double_t kFoamThickness = 5.0 *fgkmm;
1561 const Double_t kFlangeHalfLength =
1562 (kCylinderHalfLength-kFoamHalfLength)/2.;
1563 const Double_t kFlangeInnerRadius = ( 563.0/2) *fgkmm;
1564 // Dimensions of the Cone
1565 const Double_t kConeROuterMin = ( 957.0/2) *fgkmm;
1566 const Double_t kConeROuterMax = ( 997.0/2) *fgkmm;
1567 const Double_t kConeRInnerMin = ( 564.0/2) *fgkmm;
1568 const Double_t kConeRCurv1 = 10.0 *fgkmm;
1569 const Double_t kConeRCurv2 = 25.0 *fgkmm;
1570 const Double_t kConeCent1RCurv2 = ( 578.0/2) *fgkmm;
1571 const Double_t kConeCent2RCurv2 = ( 592.0/2) *fgkmm;
1572 // const Double_t kConeZOuterRing = 47.0 *fgkmm;
1573 // const Double_t kConeZOuterRingInside = 30.25*fgkmm;
1574 // const Double_t kConeZInnerRing = 161.5 *fgkmm;
1575 // const Double_t kConeZLength = 176.5 *fgkmm;
1576 const Double_t kConeZOuterRing = 38.5 *fgkmm;
1577 const Double_t kConeZOuterRingInside = 22.2 *fgkmm;
1578 const Double_t kConeZInnerRing = 153.0 *fgkmm;
1579 const Double_t kConeZLength = 168.0 *fgkmm;
1580 const Double_t kConeZPosition = kConeZLength + kCylinderHalfLength;
1581 const Double_t kConeThickness = 13.0 *fgkmm; // Cone thickness
1582 const Double_t kConeTheta = 39.1 *fgkDegree; // Cone angle
1583 const Double_t kSinConeTheta =
1584 TMath::Sin(kConeTheta*TMath::DegToRad());
1585 const Double_t kCosConeTheta =
1586 TMath::Cos(kConeTheta*TMath::DegToRad());
1587 // Dimensions of the Foam cores
1588 const Double_t kConeFoam1Length = 112.3 *fgkmm;
1589 const Double_t kConeFoam2Length = 58.4 *fgkmm;
1590 // Dimensions of the Cone Holes
1591 const Double_t kCoolingHoleWidth = 40.0 *fgkmm;
1592 const Double_t kCoolingHoleHight = 30.0 *fgkmm;
1593 const Double_t kCoolingHoleRmin = 350.0 *fgkmm;
1594 const Double_t kCoolingHolePhi = 45.0 *fgkDegree;
1595 const Double_t kMountingHoleWidth = 20.0 *fgkmm;
1596 const Double_t kMountingHoleHight = 20.0 *fgkmm;
1597 const Double_t kMountingHoleRmin = 317.5 *fgkmm;
1598 const Double_t kMountingHolePhi = 60.0 *fgkDegree;
1599 const Double_t kCableHoleRin = ( 800.0/2) *fgkmm;
1600 const Double_t kCableHoleRout = ( 920.0/2) *fgkmm;
1601 const Double_t kCableHoleWidth = 200.0 *fgkmm;
1602 // const Double_t kCableHoleAngle = 42.0 *fgkDegree;
1603 // Dimensions of the Cone Wings
1604 const Double_t kWingRmax = 527.5 *fgkmm;
1605 const Double_t kWingWidth = 70.0 *fgkmm;
1606 const Double_t kWingHalfThick = ( 10.0/2) *fgkmm;
1607 const Double_t kThetaWing = 45.0 *fgkDegree;
1608 // Dimensions of the SSD-SDD Mounting Brackets
1609 const Double_t kBracketRmin = ( 541.0/2) *fgkmm;// See SDD ROutMin
1610 const Double_t kBracketRmax = ( 585.0/2) *fgkmm;
1611 const Double_t kBracketHalfLength = ( 4.0/2) *fgkmm;
1612 const Double_t kBracketPhi = (70.*fgkmm/kBracketRmax)*fgkRadian;
1614 const Double_t kCFThickness = 0.75*fgkmm; //Carb. fib. thick.
1618 Double_t rmin1, rmin2, rmax, z;
1623 <img src="picts/ITS/file_name.gif">
1626 ITS SSD central support and thermal shield cylinder.
1633 // Central cylinder with its internal foam and the lateral flanges:
1634 // a carbon fiber Pcon which contains a rohacell Tube and two
1636 TGeoPcon *externalcylshape = new TGeoPcon(0,360,4);
1638 rmax = kCylinderOuterRadius;
1639 rmin1 = kFlangeInnerRadius - kCylinderThickness;
1640 rmin2 = rmax - 2*kCylinderThickness - kFoamThickness;
1641 externalcylshape->DefineSection(0,-kCylinderHalfLength,rmin1,rmax);
1642 externalcylshape->DefineSection(1,-kFoamHalfLength ,rmin2,rmax);
1643 externalcylshape->DefineSection(2, kFoamHalfLength ,rmin2,rmax);
1644 externalcylshape->DefineSection(3, kCylinderHalfLength,rmin1,rmax);
1646 rmax = kCylinderOuterRadius - kCylinderThickness;
1647 rmin1 = rmax - kFoamThickness;
1648 TGeoTube *foamshape = new TGeoTube(rmin1,rmax,kFoamHalfLength);
1650 rmax = kCylinderOuterRadius - kCylinderThickness;
1651 rmin1 = rmax - kFoamThickness;
1652 rmin2 = kFlangeInnerRadius;
1653 TGeoCone *flangeshape = new TGeoCone(kFlangeHalfLength,
1654 rmin1,rmax,rmin2,rmax);
1657 // We have the shapes: now create the real volumes
1659 TGeoMedium *medSSDcf = mgr->GetMedium("ITS_SSD C (M55J)$");
1660 TGeoMedium *medSSDair = mgr->GetMedium("ITS_SSD AIR$");
1661 TGeoMedium *medSSDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite
1662 TGeoMedium *medSSDroh = mgr->GetMedium("ITS_ROHACELL$");
1663 TGeoMedium *medSSDal = mgr->GetMedium("ITS_ALUMINUM$");
1665 TGeoVolume *cfcylinder = new TGeoVolume("SSDexternalcylinder",
1666 externalcylshape,medSSDcf);
1667 cfcylinder->SetVisibility(kTRUE);
1668 cfcylinder->SetLineColor(4); // blue
1669 cfcylinder->SetLineWidth(1);
1670 cfcylinder->SetFillColor(cfcylinder->GetLineColor());
1671 cfcylinder->SetFillStyle(4000); // 0% transparent
1673 TGeoVolume *foamcylinder = new TGeoVolume("SSDfoamcylinder",
1674 foamshape,medSSDroh);
1675 foamcylinder->SetVisibility(kTRUE);
1676 foamcylinder->SetLineColor(3); // green
1677 foamcylinder->SetLineWidth(1);
1678 foamcylinder->SetFillColor(foamcylinder->GetLineColor());
1679 foamcylinder->SetFillStyle(4050); // 50% transparent
1681 TGeoVolume *flangecylinder = new TGeoVolume("SSDflangecylinder",
1682 flangeshape,medSSDste);
1683 flangecylinder->SetVisibility(kTRUE);
1684 flangecylinder->SetLineColor(2); // red
1685 flangecylinder->SetLineWidth(1);
1686 flangecylinder->SetFillColor(flangecylinder->GetLineColor());
1687 flangecylinder->SetFillStyle(4050); // 50% transparent
1689 // Mount up the cylinder
1690 cfcylinder->AddNode(foamcylinder,1,0);
1691 cfcylinder->AddNode(flangecylinder,1,
1692 new TGeoTranslation(0, 0, kFoamHalfLength+kFlangeHalfLength));
1693 cfcylinder->AddNode(flangecylinder,2,new TGeoCombiTrans(
1694 0, 0, -kFoamHalfLength-kFlangeHalfLength,
1695 new TGeoRotation("",0,180,0) ) );
1698 // The whole Cone as an assembly
1699 TGeoVolumeAssembly *vC = new TGeoVolumeAssembly("ITSssdCone");
1702 // SSD Support Cone with its internal inserts: a carbon fiber Pcon
1703 // with holes which contains a stesalite Pcon which on turn contains a
1705 TGeoPcon *coneshape = new TGeoPcon(0.0, 360.0, 12);
1707 coneshape->Z(0) = 0.0;
1708 coneshape->Rmin(0) = kConeROuterMin;
1709 coneshape->Rmax(0) = kConeROuterMax;
1711 coneshape->Z(1) = kConeZOuterRingInside - kConeRCurv1;
1712 coneshape->Rmin(1) = coneshape->GetRmin(0);
1713 coneshape->Rmax(1) = coneshape->GetRmax(0);
1715 coneshape->Z(2) = kConeZOuterRingInside;
1716 coneshape->Rmin(2) = coneshape->GetRmin(1) - kConeRCurv1;
1717 coneshape->Rmax(2) = coneshape->GetRmax(0);
1719 coneshape->Z(3) = coneshape->GetZ(2);
1720 coneshape->Rmax(3) = coneshape->GetRmax(0);
1722 coneshape->Z(4) = kConeZOuterRing - kConeRCurv1;
1723 coneshape->Rmax(4) = coneshape->GetRmax(0);
1725 coneshape->Z(5) = kConeZOuterRing;
1726 coneshape->Rmax(5) = coneshape->GetRmax(4) - kConeRCurv1;
1728 coneshape->Z(6) = coneshape->GetZ(5);
1730 RadiusOfCurvature(kConeRCurv2,90.0,kConeZInnerRing,kConeCent1RCurv2,
1731 90.0-kConeTheta,z,rmin1);
1732 coneshape->Z(7) = z;
1733 coneshape->Rmin(7) = rmin1;
1735 coneshape->Rmin(3) = RminFromZpCone(coneshape,7,90.-kConeTheta,
1736 coneshape->GetZ(3));
1738 coneshape->Rmin(4) = RminFrom2Points(coneshape,3,7,coneshape->GetZ(4));
1740 coneshape->Rmin(5) = RminFrom2Points(coneshape,3,7,coneshape->GetZ(5));
1742 coneshape->Rmin(6) = coneshape->GetRmin(5);
1744 coneshape->Z(8) = kConeZInnerRing;
1745 coneshape->Rmin(8) = kConeCent1RCurv2;
1747 coneshape->Z(9) = coneshape->GetZ(8);
1748 coneshape->Rmin(9) = kConeRInnerMin;
1750 RadiusOfCurvature(kConeRCurv2,90.0,kConeZLength,kConeCent2RCurv2,
1751 90.0-kConeTheta,z,rmax);
1753 coneshape->Z(10) = z;
1754 coneshape->Rmin(10) = coneshape->GetRmin(9);
1755 coneshape->Rmax(10) = rmax;
1757 coneshape->Rmax(6) = RmaxFromZpCone(coneshape,10,90.-kConeTheta,
1758 coneshape->GetZ(6));
1760 coneshape->Rmax(7) = RmaxFrom2Points(coneshape,6,10,coneshape->GetZ(7));
1762 coneshape->Rmax(8) = RmaxFrom2Points(coneshape,6,10,coneshape->GetZ(8));
1764 coneshape->Rmax(9) = coneshape->GetRmax(8);
1766 coneshape->Z(11) = kConeZLength;
1767 coneshape->Rmin(11) = coneshape->GetRmin(10);
1768 coneshape->Rmax(11) = kConeCent2RCurv2;
1770 // SSD Cone Insert: another Pcon
1771 Double_t x0, y0, x1, y1, x2, y2;
1772 TGeoPcon *coneinsertshape = new TGeoPcon(0.0,360.0,12);
1774 coneinsertshape->Z(0) = coneshape->GetZ(0) + kCFThickness;
1775 coneinsertshape->Rmin(0) = coneshape->GetRmin(0) + kCFThickness;
1776 coneinsertshape->Rmax(0) = coneshape->GetRmax(0) - kCFThickness;
1778 x0 = coneshape->GetZ(0); y0 = coneshape->GetRmin(0);
1779 x1 = coneshape->GetZ(1); y1 = coneshape->GetRmin(1);
1780 x2 = coneshape->GetZ(2); y2 = coneshape->GetRmin(2);
1781 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
1782 coneinsertshape->Z(1) = z;
1783 coneinsertshape->Rmin(1) = rmin1;
1784 coneinsertshape->Rmax(1) = coneinsertshape->GetRmax(0);
1786 x0 = coneshape->GetZ(1); y0 = coneshape->GetRmin(1);
1787 x1 = coneshape->GetZ(2); y1 = coneshape->GetRmin(2);
1788 x2 = coneshape->GetZ(3); y2 = coneshape->GetRmin(3);
1789 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
1790 coneinsertshape->Z(2) = z;
1791 coneinsertshape->Rmin(2) = rmin1;
1792 coneinsertshape->Rmax(2) = coneinsertshape->GetRmax(1);
1794 x0 = coneshape->GetZ(2); y0 = coneshape->GetRmin(2);
1795 x1 = coneshape->GetZ(3); y1 = coneshape->GetRmin(3);
1796 x2 = coneshape->GetZ(4); y2 = coneshape->GetRmin(4);
1797 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
1798 coneinsertshape->Z(3) = z;
1799 coneinsertshape->Rmin(3) = rmin1;
1800 coneinsertshape->Rmax(3) = coneinsertshape->GetRmax(2);
1802 x0 = coneshape->GetZ(3); y0 = coneshape->GetRmax(3);
1803 x1 = coneshape->GetZ(4); y1 = coneshape->GetRmax(4);
1804 x2 = coneshape->GetZ(5); y2 = coneshape->GetRmax(5);
1805 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
1806 coneinsertshape->Z(4) = z;
1807 coneinsertshape->Rmax(4) = rmax;
1809 x0 = coneshape->GetZ(4); y0 = coneshape->GetRmax(4);
1810 x1 = coneshape->GetZ(5); y1 = coneshape->GetRmax(5);
1811 x2 = coneshape->GetZ(6); y2 = coneshape->GetRmax(6);
1812 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
1813 coneinsertshape->Z(5) = z;
1814 coneinsertshape->Rmax(5) = rmax;
1816 x0 = coneshape->GetZ(5); y0 = coneshape->GetRmax(5);
1817 x1 = coneshape->GetZ(6); y1 = coneshape->GetRmax(6);
1818 x2 = coneshape->GetZ(7); y2 = coneshape->GetRmax(7);
1819 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
1820 coneinsertshape->Z(6) = z;
1821 coneinsertshape->Rmax(6) = rmax;
1823 x0 = coneshape->GetZ(6); y0 = coneshape->GetRmin(6);
1824 x1 = coneshape->GetZ(7); y1 = coneshape->GetRmin(7);
1825 x2 = coneshape->GetZ(8); y2 = coneshape->GetRmin(8);
1826 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
1827 coneinsertshape->Z(7) = z;
1828 coneinsertshape->Rmin(7) = rmin1;
1830 coneinsertshape->Rmin(4) = RminFrom2Points(coneinsertshape,3,7,
1831 coneinsertshape->GetZ(4));
1833 coneinsertshape->Rmin(5) = RminFrom2Points(coneinsertshape,3,7,
1834 coneinsertshape->GetZ(5));
1836 coneinsertshape->Rmin(6) = coneinsertshape->GetRmin(5);
1838 x0 = coneshape->GetZ(7); y0 = coneshape->GetRmin(7);
1839 x1 = coneshape->GetZ(8); y1 = coneshape->GetRmin(8);
1840 x2 = coneshape->GetZ(9); y2 = coneshape->GetRmin(9);
1841 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
1842 coneinsertshape->Z(8) = z;
1843 coneinsertshape->Rmin(8) = rmin1;
1845 x0 = coneshape->GetZ( 8); y0 = coneshape->GetRmin( 8);
1846 x1 = coneshape->GetZ( 9); y1 = coneshape->GetRmin( 9);
1847 x2 = coneshape->GetZ(10); y2 = coneshape->GetRmin(10);
1848 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
1849 coneinsertshape->Z(9) = z;
1850 coneinsertshape->Rmin(9) = rmin1;
1852 x0 = coneshape->GetZ( 9); y0 = coneshape->GetRmax( 9);
1853 x1 = coneshape->GetZ(10); y1 = coneshape->GetRmax(10);
1854 x2 = coneshape->GetZ(11); y2 = coneshape->GetRmax(11);
1855 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
1856 coneinsertshape->Z(10) = z;
1857 coneinsertshape->Rmax(10) = rmax;
1858 coneinsertshape->Rmin(10) = coneinsertshape->GetRmin(9);
1860 coneinsertshape->Rmax(7) = RmaxFrom2Points(coneinsertshape,6,10,
1861 coneinsertshape->GetZ(7));
1863 coneinsertshape->Rmax(8) = RmaxFrom2Points(coneinsertshape,6,10,
1864 coneinsertshape->GetZ(8));
1866 coneinsertshape->Rmax(9) = coneinsertshape->GetRmax(8);
1868 x0 = coneshape->GetZ(10); y0 = coneshape->GetRmax(10);
1869 x1 = coneshape->GetZ(11); y1 = coneshape->GetRmax(11);
1870 x2 = coneshape->GetZ(11); y2 = coneshape->GetRmin(11);
1871 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
1872 coneinsertshape->Z(11) = z;
1873 coneinsertshape->Rmax(11) = rmax;
1874 coneinsertshape->Rmin(11) = coneinsertshape->GetRmin(10);
1876 // SSD Cone Foams: two other Pcon's
1877 TGeoPcon *conefoam1shape = new TGeoPcon(0.0, 360.0, 4);
1879 conefoam1shape->Z(0) = coneinsertshape->GetZ(3);
1880 conefoam1shape->Rmin(0) = coneinsertshape->GetRmin(3);
1881 conefoam1shape->Rmax(0) = conefoam1shape->GetRmin(0);
1883 conefoam1shape->Rmax(1) = conefoam1shape->GetRmax(0);
1884 conefoam1shape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
1885 conefoam1shape->GetRmax(1));
1886 conefoam1shape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
1887 conefoam1shape->GetZ(1));
1889 Double_t t = kConeThickness - 2*kCFThickness;
1890 conefoam1shape->Rmin(2) = conefoam1shape->GetRmax(0) -
1891 (kConeFoam1Length*kCosConeTheta - t*kSinConeTheta);
1892 conefoam1shape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
1893 conefoam1shape->GetRmin(2));
1894 conefoam1shape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
1895 conefoam1shape->GetZ(2));
1897 conefoam1shape->Rmin(3) = conefoam1shape->GetRmin(2);
1898 conefoam1shape->Rmax(3) = conefoam1shape->GetRmin(3);
1899 conefoam1shape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
1900 conefoam1shape->GetRmax(3));
1902 TGeoPcon *conefoam2shape = new TGeoPcon(0.0, 360.0, 4);
1904 conefoam2shape->Z(3) = coneinsertshape->GetZ(10);
1905 conefoam2shape->Rmin(3) = coneinsertshape->GetRmax(10);
1906 conefoam2shape->Rmax(3) = conefoam2shape->GetRmin(3);
1908 conefoam2shape->Rmin(2) = conefoam2shape->GetRmin(3);
1909 conefoam2shape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
1910 conefoam2shape->GetRmin(2));
1911 conefoam2shape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
1912 conefoam2shape->GetZ(2));
1914 conefoam2shape->Rmin(0) = conefoam2shape->GetRmax(2) +
1915 (kConeFoam2Length*kCosConeTheta - t*kSinConeTheta);
1916 conefoam2shape->Rmax(0) = conefoam2shape->GetRmin(0);
1917 conefoam2shape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
1918 conefoam2shape->GetRmin(0));
1920 conefoam2shape->Rmax(1) = conefoam2shape->GetRmax(0);
1921 conefoam2shape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
1922 conefoam2shape->GetRmax(1));
1923 conefoam2shape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
1924 conefoam2shape->GetZ(1));
1926 // SSD Cone Holes: Pcon's
1927 // A single hole volume gives an overlap with coneinsert, so
1928 // three contiguous volumes are created: one to be put in coneinsert
1929 // and two in the cone carbon fiber envelope
1931 holePhi = (kCoolingHoleWidth/kCoolingHoleRmin)*TMath::RadToDeg();
1933 TGeoPcon *coolingholeshape = new TGeoPcon(-holePhi/2., holePhi, 4);
1935 coolingholeshape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight;
1936 coolingholeshape->Rmax(0) = coolingholeshape->GetRmin(0);
1937 coolingholeshape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
1938 coolingholeshape->GetRmin(0));
1940 coolingholeshape->Rmax(1) = coolingholeshape->GetRmax(0);
1941 coolingholeshape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
1942 coolingholeshape->GetRmax(1));
1943 coolingholeshape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
1944 coolingholeshape->GetZ(1));
1946 coolingholeshape->Rmin(2) = kCoolingHoleRmin;
1947 coolingholeshape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
1948 coolingholeshape->GetRmin(2));
1949 coolingholeshape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
1950 coolingholeshape->GetZ(2));
1952 coolingholeshape->Rmin(3) = coolingholeshape->GetRmin(2);
1953 coolingholeshape->Rmax(3) = coolingholeshape->GetRmin(3);
1954 coolingholeshape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
1955 coolingholeshape->GetRmax(3));
1957 TGeoPcon *coolinghole2shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1959 coolinghole2shape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight;
1960 coolinghole2shape->Rmax(0) = coolinghole2shape->GetRmin(0);
1961 coolinghole2shape->Z(0) = ZFromRminpCone(coneshape,3,90.-kConeTheta,
1962 coolinghole2shape->GetRmin(0));
1964 coolinghole2shape->Rmax(1) = coolinghole2shape->GetRmax(0);
1965 coolinghole2shape->Z(1) = coolingholeshape->GetZ(0);
1966 coolinghole2shape->Rmin(1) = RminFromZpCone(coneshape,3,90.-kConeTheta,
1967 coolinghole2shape->GetZ(1));
1969 coolinghole2shape->Rmin(2) = kCoolingHoleRmin;
1970 coolinghole2shape->Z(2) = ZFromRminpCone(coneshape,3,90.-kConeTheta,
1971 coolinghole2shape->GetRmin(2));
1972 coolinghole2shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
1973 coolinghole2shape->GetZ(2));
1975 coolinghole2shape->Rmin(3) = coolinghole2shape->GetRmin(2);
1976 coolinghole2shape->Rmax(3) = coolinghole2shape->GetRmin(3);
1977 coolinghole2shape->Z(3) = coolingholeshape->GetZ(2);
1979 TGeoPcon *coolinghole3shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1981 coolinghole3shape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight;
1982 coolinghole3shape->Rmax(0) = coolinghole3shape->GetRmin(0);
1983 coolinghole3shape->Z(0) = coolingholeshape->GetZ(1);
1985 coolinghole3shape->Rmax(1) = coolinghole3shape->GetRmax(0);
1986 coolinghole3shape->Z(1) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta,
1987 coolinghole3shape->GetRmax(1));
1988 coolinghole3shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
1989 coolinghole3shape->GetZ(1));
1991 coolinghole3shape->Rmin(2) = kCoolingHoleRmin;
1992 coolinghole3shape->Z(2) = coolingholeshape->GetZ(3);
1993 coolinghole3shape->Rmax(2) = RmaxFromZpCone(coneshape,7,90.-kConeTheta,
1994 coolinghole3shape->GetZ(2));
1996 coolinghole3shape->Rmin(3) = coolinghole3shape->GetRmin(2);
1997 coolinghole3shape->Rmax(3) = coolinghole3shape->GetRmin(3);
1998 coolinghole3shape->Z(3) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta,
1999 coolinghole3shape->GetRmax(3));
2002 holePhi = (kMountingHoleWidth/kMountingHoleRmin)*TMath::RadToDeg();
2004 TGeoPcon *mountingholeshape = new TGeoPcon(-holePhi/2., holePhi, 4);
2006 mountingholeshape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight;
2007 mountingholeshape->Rmax(0) = mountingholeshape->GetRmin(0);
2008 mountingholeshape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
2009 mountingholeshape->GetRmin(0));
2011 mountingholeshape->Rmin(1) = kMountingHoleRmin;
2012 mountingholeshape->Rmax(1) = mountingholeshape->GetRmax(0);
2013 mountingholeshape->Z(1) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
2014 mountingholeshape->GetRmin(1));
2016 mountingholeshape->Rmin(2) = mountingholeshape->GetRmin(1);
2017 mountingholeshape->Rmax(2) = mountingholeshape->GetRmax(1);
2018 mountingholeshape->Z(2) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
2019 mountingholeshape->GetRmax(2));
2021 mountingholeshape->Rmin(3) = mountingholeshape->GetRmin(2);
2022 mountingholeshape->Rmax(3) = mountingholeshape->GetRmin(3);
2023 mountingholeshape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
2024 mountingholeshape->GetRmax(3));
2026 TGeoPcon *mountinghole2shape = new TGeoPcon(-holePhi/2., holePhi, 4);
2028 mountinghole2shape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight;
2029 mountinghole2shape->Rmax(0) = mountingholeshape->GetRmin(0);
2030 mountinghole2shape->Z(0) = ZFromRminpCone(coneshape,3,90.-kConeTheta,
2031 mountinghole2shape->GetRmin(0));
2033 mountinghole2shape->Rmax(1) = mountinghole2shape->GetRmax(0);
2034 mountinghole2shape->Z(1) = mountingholeshape->Z(0);
2035 mountinghole2shape->Rmin(1) = RminFromZpCone(coneshape,3,90.-kConeTheta,
2036 mountinghole2shape->GetZ(1));
2038 mountinghole2shape->Rmin(2) = kMountingHoleRmin;
2039 mountinghole2shape->Z(2) = ZFromRminpCone(coneshape,3,90.-kConeTheta,
2040 mountinghole2shape->GetRmin(2));
2041 mountinghole2shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
2042 mountinghole2shape->GetZ(2));
2044 mountinghole2shape->Rmin(3) = mountinghole2shape->Rmin(2);
2045 mountinghole2shape->Rmax(3) = mountinghole2shape->Rmin(3);
2046 mountinghole2shape->Z(3) = mountingholeshape->Z(1);
2048 TGeoPcon *mountinghole3shape = new TGeoPcon(-holePhi/2., holePhi, 4);
2050 mountinghole3shape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight;
2051 mountinghole3shape->Rmax(0) = mountingholeshape->GetRmin(0);
2052 mountinghole3shape->Z(0) = mountingholeshape->GetZ(2);
2054 mountinghole3shape->Rmax(1) = mountinghole3shape->GetRmax(0);
2055 mountinghole3shape->Z(1) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta,
2056 mountinghole3shape->GetRmax(1));
2057 mountinghole3shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
2058 mountinghole3shape->GetZ(1));
2060 mountinghole3shape->Rmin(2) = kMountingHoleRmin;
2061 mountinghole3shape->Z(2) = mountingholeshape->Z(3);
2062 mountinghole3shape->Rmax(2) = RmaxFromZpCone(coneshape,7,90.-kConeTheta,
2063 mountinghole3shape->GetZ(2));
2065 mountinghole3shape->Rmin(3) = mountinghole3shape->Rmin(2);
2066 mountinghole3shape->Rmax(3) = mountinghole3shape->Rmin(3);
2067 mountinghole3shape->Z(3) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta,
2068 mountinghole3shape->GetRmax(3));
2070 // The Cable Hole is even more complicated, a Composite Shape
2071 // is unavoidable here (gosh!)
2072 TGeoPcon *coneshapecopy = new TGeoPcon("conecopy",0.0, 360.0, 12);
2074 for (Int_t i=0; i<12; i++) {
2075 coneshapecopy->Rmin(i) = coneshape->GetRmin(i);
2076 coneshapecopy->Rmax(i) = coneshape->GetRmax(i);
2077 coneshapecopy->Z(i) = coneshape->GetZ(i);
2080 holePhi = (kCableHoleWidth/kCableHoleRout)*TMath::RadToDeg();
2081 TGeoConeSeg *chCS = new TGeoConeSeg("chCS", 0.5*kConeZLength,
2082 kCableHoleRin, kCableHoleRout,
2083 kCableHoleRin, kCableHoleRout,
2084 -0.5*holePhi, 0.5*holePhi);
2086 TGeoCompositeShape *cableholeshape = new TGeoCompositeShape(
2087 "SSDCableHoleShape",
2091 chCS->InspectShape();
2092 cableholeshape->InspectShape();
2095 // SSD Cone Wings: Tube and TubeSeg shapes
2096 Double_t angleWideWing, angleWideWingThickness;
2097 angleWideWing = (kWingWidth/kWingRmax)*TMath::RadToDeg();
2098 angleWideWingThickness = (kCFThickness/kWingRmax)*TMath::RadToDeg();
2100 TGeoTubeSeg *wingshape = new TGeoTubeSeg(kConeROuterMax, kWingRmax,
2104 TGeoTubeSeg *winginsertshape = new TGeoTubeSeg(kConeROuterMax,
2105 kWingRmax-kCFThickness,
2106 kWingHalfThick-kCFThickness,
2107 angleWideWingThickness,
2108 angleWideWing-angleWideWingThickness);
2110 // SDD support plate, SSD side (Mounting Bracket): a TubeSeg
2111 TGeoTubeSeg *bracketshape = new TGeoTubeSeg(kBracketRmin, kBracketRmax,
2112 kBracketHalfLength, -kBracketPhi/2, kBracketPhi/2);
2115 // We have the shapes: now create the real volumes
2117 TGeoVolume *cfcone = new TGeoVolume("SSDCarbonFiberCone",
2118 coneshape,medSSDcf);
2119 cfcone->SetVisibility(kTRUE);
2120 cfcone->SetLineColor(4); // Blue
2121 cfcone->SetLineWidth(1);
2122 cfcone->SetFillColor(cfcone->GetLineColor());
2123 cfcone->SetFillStyle(4000); // 0% transparent
2125 TGeoVolume *cfconeinsert = new TGeoVolume("SSDCarbonFiberConeInsert",
2126 coneinsertshape,medSSDste);
2127 cfconeinsert->SetVisibility(kTRUE);
2128 cfconeinsert->SetLineColor(2); // Red
2129 cfconeinsert->SetLineWidth(1);
2130 cfconeinsert->SetFillColor(cfconeinsert->GetLineColor());
2131 cfconeinsert->SetFillStyle(4050); // 50% transparent
2133 TGeoVolume *cfconefoam1 = new TGeoVolume("SSDCarbonFiberConeFoam1",
2134 conefoam1shape,medSSDroh);
2135 cfconefoam1->SetVisibility(kTRUE);
2136 cfconefoam1->SetLineColor(3); // Green
2137 cfconefoam1->SetLineWidth(1);
2138 cfconefoam1->SetFillColor(cfconefoam1->GetLineColor());
2139 cfconefoam1->SetFillStyle(4050); // 50% transparent
2141 TGeoVolume *cfconefoam2 = new TGeoVolume("SSDCarbonFiberConeFoam2",
2142 conefoam2shape,medSSDroh);
2143 cfconefoam2->SetVisibility(kTRUE);
2144 cfconefoam2->SetLineColor(3); // Green
2145 cfconefoam2->SetLineWidth(1);
2146 cfconefoam2->SetFillColor(cfconefoam2->GetLineColor());
2147 cfconefoam2->SetFillStyle(4050); // 50% transparent
2149 TGeoVolume *coolinghole = new TGeoVolume("SSDCoolingHole",
2150 coolingholeshape,medSSDair);
2151 coolinghole->SetVisibility(kTRUE);
2152 coolinghole->SetLineColor(5); // Yellow
2153 coolinghole->SetLineWidth(1);
2154 coolinghole->SetFillColor(coolinghole->GetLineColor());
2155 coolinghole->SetFillStyle(4090); // 90% transparent
2157 TGeoVolume *coolinghole2 = new TGeoVolume("SSDCoolingHole2",
2158 coolinghole2shape,medSSDair);
2159 coolinghole2->SetVisibility(kTRUE);
2160 coolinghole2->SetLineColor(5); // Yellow
2161 coolinghole2->SetLineWidth(1);
2162 coolinghole2->SetFillColor(coolinghole2->GetLineColor());
2163 coolinghole2->SetFillStyle(4090); // 90% transparent
2165 TGeoVolume *coolinghole3 = new TGeoVolume("SSDCoolingHole3",
2166 coolinghole3shape,medSSDair);
2167 coolinghole3->SetVisibility(kTRUE);
2168 coolinghole3->SetLineColor(5); // Yellow
2169 coolinghole3->SetLineWidth(1);
2170 coolinghole3->SetFillColor(coolinghole3->GetLineColor());
2171 coolinghole3->SetFillStyle(4090); // 90% transparent
2173 TGeoVolume *mountinghole = new TGeoVolume("SSDMountingHole",
2174 mountingholeshape,medSSDair);
2175 mountinghole->SetVisibility(kTRUE);
2176 mountinghole->SetLineColor(5); // Yellow
2177 mountinghole->SetLineWidth(1);
2178 mountinghole->SetFillColor(mountinghole->GetLineColor());
2179 mountinghole->SetFillStyle(4090); // 90% transparent
2181 TGeoVolume *mountinghole2 = new TGeoVolume("SSDMountingHole2",
2182 mountinghole2shape,medSSDair);
2183 mountinghole2->SetVisibility(kTRUE);
2184 mountinghole2->SetLineColor(5); // Yellow
2185 mountinghole2->SetLineWidth(1);
2186 mountinghole2->SetFillColor(mountinghole2->GetLineColor());
2187 mountinghole2->SetFillStyle(4090); // 90% transparent
2189 TGeoVolume *mountinghole3 = new TGeoVolume("SSDMountingHole3",
2190 mountinghole3shape,medSSDair);
2191 mountinghole3->SetVisibility(kTRUE);
2192 mountinghole3->SetLineColor(5); // Yellow
2193 mountinghole3->SetLineWidth(1);
2194 mountinghole3->SetFillColor(mountinghole3->GetLineColor());
2195 mountinghole3->SetFillStyle(4090); // 90% transparent
2197 TGeoVolume *wing = new TGeoVolume("SSDWing",wingshape,medSSDcf);
2198 wing->SetVisibility(kTRUE);
2199 wing->SetLineColor(4); // Blue
2200 wing->SetLineWidth(1);
2201 wing->SetFillColor(wing->GetLineColor());
2202 wing->SetFillStyle(4000); // 0% transparent
2204 TGeoVolume *cablehole = new TGeoVolume("SSDCableHole",
2205 cableholeshape,medSSDair);
2206 cablehole->SetVisibility(kTRUE);
2207 cablehole->SetLineColor(5); // Yellow
2208 cablehole->SetLineWidth(1);
2209 cablehole->SetFillColor(cablehole->GetLineColor());
2210 cablehole->SetFillStyle(4090); // 90% transparent
2212 TGeoVolume *winginsert = new TGeoVolume("SSDWingInsert",
2213 winginsertshape,medSSDste);
2214 winginsert->SetVisibility(kTRUE);
2215 winginsert->SetLineColor(2); // Red
2216 winginsert->SetLineWidth(1);
2217 winginsert->SetFillColor(winginsert->GetLineColor());
2218 winginsert->SetFillStyle(4050); // 50% transparent
2220 TGeoVolume *bracket = new TGeoVolume("SSDMountingBracket",
2221 bracketshape,medSSDal);
2222 bracket->SetVisibility(kTRUE);
2223 bracket->SetLineColor(6); // Purple
2224 bracket->SetLineWidth(1);
2225 bracket->SetFillColor(bracket->GetLineColor());
2226 bracket->SetFillStyle(4000); // 0% transparent
2229 for (Int_t i=0; i<(Int_t)(360./kMountingHolePhi); i++) {
2230 Double_t phiH = i*kMountingHolePhi + 0.5*kMountingHolePhi;
2231 cfconefoam2->AddNode(mountinghole,i+1, new TGeoRotation("", phiH, 0, 0));
2234 for (Int_t i=0; i<(Int_t)(360./kCoolingHolePhi); i++) {
2235 Double_t phiH = i*kCoolingHolePhi + 0.5*kCoolingHolePhi;
2236 cfconeinsert->AddNodeOverlap(coolinghole,i+1, new TGeoRotation("", phiH, 0, 0));
2239 cfconeinsert->AddNode(cfconefoam1,1,0);
2240 cfconeinsert->AddNode(cfconefoam2,1,0);
2242 cfcone->AddNode(cfconeinsert,1,0);
2244 for (Int_t i=0; i<(Int_t)(360./kCoolingHolePhi); i++) {
2245 Double_t phiH = i*kCoolingHolePhi + 0.5*kCoolingHolePhi;
2246 cfcone->AddNode(coolinghole2,i+1, new TGeoRotation("", phiH, 0, 0));
2247 cfcone->AddNode(coolinghole3,i+1, new TGeoRotation("", phiH, 0, 0));
2248 cfcone->AddNodeOverlap(cablehole,i+1, new TGeoRotation("", phiH, 0, 0));
2251 for (Int_t i=0; i<(Int_t)(360./kMountingHolePhi); i++) {
2252 Double_t phiH = i*kMountingHolePhi + 0.5*kMountingHolePhi;
2253 cfcone->AddNode(mountinghole2,i+1, new TGeoRotation("", phiH, 0, 0));
2254 cfcone->AddNode(mountinghole3,i+1, new TGeoRotation("", phiH, 0, 0));
2257 wing->AddNode(winginsert,1,0);
2259 // Add all volumes in the Cone assembly
2260 vC->AddNode(cfcone,1,new TGeoTranslation(0,0,-kConeZPosition));
2262 for (Int_t i=0; i<4; i++) {
2263 Double_t thetaW = kThetaWing + 90.*i + angleWideWing/2.;
2264 vC->AddNode(wing, i+1, new TGeoCombiTrans(0, 0, -kConeZPosition+kWingHalfThick,
2265 new TGeoRotation("",thetaW,180,0)));
2268 Double_t zBracket = kConeZPosition - coneshape->GetZ(9) +
2269 2*bracketshape->GetDz();
2270 for (Int_t i=0; i<3; i++) {
2271 Double_t thetaB = 60 + 120.*i;
2272 vC->AddNode(bracket, i+1, new TGeoCombiTrans(0, 0, -zBracket,
2273 new TGeoRotation("",thetaB,0,0)));
2276 // Finally put everything in the mother volume
2277 moth->AddNode(cfcylinder,1,0);
2279 moth->AddNode(vC, 1, 0 );
2280 moth->AddNode(vC, 2, new TGeoRotation("",180, 180, 0) );
2282 // Some debugging if requested
2291 //______________________________________________________________________
2292 void AliITSv11GeometrySupport::ServicesCableSupport(TGeoVolume *moth,
2295 // Creates the cable trays which are outside the ITS support cones
2296 // but still inside the TPC
2297 // This is now a stearing routine, the actual work is done by three
2298 // specialized methods to avoid a really huge unique method
2301 // moth : the TGeoVolume owing the volume structure
2302 // mgr : the GeoManager (default gGeoManager)
2305 // Created: 15 Nov 2009 Mario Sitta
2308 TraySupportsSideA(moth, mgr);
2310 ServicesCableSupportSPD(moth, mgr);
2311 ServicesCableSupportSDD(moth, mgr);
2312 ServicesCableSupportSSD(moth, mgr);
2317 //______________________________________________________________________
2318 void AliITSv11GeometrySupport::TraySupportsSideA(TGeoVolume *moth,
2321 // Creates the structure supporting the ITS cable trays on Side A
2324 // moth : the TGeoVolume owing the volume structure
2325 // mgr : the GeoManager (default gGeoManager)
2328 // Created: 14 Dec 2009 Mario Sitta
2329 // Updated: 26 Feb 2010 Mario Sitta
2331 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
2332 // drawings and other (oral) information given by F.Tosello
2335 // Dimensions and positions of the A-Side Cable Tray Support Ring
2337 const Double_t kSuppRingYTrans = 110.00 *fgkmm;
2338 const Double_t kSuppRingZTrans =(1011.00+435.00) *fgkmm;
2339 const Double_t kSuppForwYTrans = 185.00 *fgkmm;
2341 const Double_t kExtSuppRingSpace1 = 33.00 *fgkmm;
2342 const Double_t kExtSuppRingSpace2 = 45.00 *fgkmm;
2343 const Double_t kExtSuppRingSpcAbov = 30.00 *fgkmm;
2344 const Double_t kExtSuppRingBase = 491.50 *fgkmm;
2345 const Double_t kExtSuppRingInward = 35.00 *fgkmm;
2346 const Double_t kExtSuppRingRmax = 540.00 *fgkmm;
2347 const Double_t kExtSuppRingRint1 = 465.00 *fgkmm;
2348 const Double_t kExtSuppRingRint2 = 467.00 *fgkmm;
2349 const Double_t kExtSuppRingInnerHi = 450.00 *fgkmm;
2350 const Double_t kExtSuppRingInWide = 100.00 *fgkmm;
2351 const Double_t kExtSuppRingR7 = 7.00 *fgkmm;
2352 const Double_t kExtSuppRingR5 = 5.00 *fgkmm;
2353 const Double_t kExtSuppRingThick = 20.00 *fgkmm;
2355 const Double_t kExtSuppRingSpcAng = 10.50 *TMath::DegToRad();
2356 const Double_t kExtSuppRingPartPhi = 15.00 *TMath::DegToRad();
2357 const Double_t kExtSuppRingIntAng = 7.00 *TMath::DegToRad();
2358 const Double_t kExtSuppRingBaseAng = 75.00 *TMath::DegToRad();
2359 const Double_t kExtSuppRingR7Ang = 100.00 *TMath::DegToRad(); // Guessed
2361 const Int_t kExtSuppRingNPtsArc = 10; // N.points to approximate arc
2363 const Double_t kIntSuppRingThick1 = 15.00 *fgkmm;
2364 const Double_t kIntSuppRingThick2 = 13.00 *fgkmm;
2365 const Double_t kIntSuppRingInward = 24.00 *fgkmm;
2366 const Double_t kIntSuppRingThick = 20.00 *fgkmm;
2368 const Double_t kSuppCylHeight = 340.00 *fgkmm;
2369 const Double_t kSuppCylRint = 475.00 *fgkmm;
2370 const Double_t kSuppCylRext = 478.00 *fgkmm;
2371 const Double_t kSuppCylDispl = 137.70 *fgkmm;
2373 const Double_t kSuppSpacerHeight = 30.00 *fgkmm;
2374 const Double_t kSuppSpacerThick = 10.00 *fgkmm;
2376 const Double_t kSuppSpacerAngle = 15.00; // Degrees
2378 const Double_t kSuppForwRingRint1 = 500.00 *fgkmm;
2379 const Double_t kSuppForwRingRint2 = 540.00 *fgkmm;
2380 const Double_t kSuppForwRingRext = 560.00 *fgkmm;
2381 const Double_t kSuppForwRingThikAll = 50.00 *fgkmm;
2382 const Double_t kSuppForwRingThikInt = 20.00 *fgkmm;
2385 const Double_t kSuppForwConeRmin = 558.00 *fgkmm;
2386 const Double_t kSuppForwConeRmax = 681.00 *fgkmm;
2387 const Double_t kSuppForwConeLen1 = 318.00 *fgkmm;
2388 const Double_t kSuppForwConeLen2 = 662.00 *fgkmm;
2389 const Double_t kSuppForwConeThick = 3.00 *fgkmm;
2391 const Double_t kSuppBackRingPlacTop = 90.00 *fgkmm;
2392 const Double_t kSuppBackRingPlacSid = 50.00 *fgkmm;
2393 const Double_t kSuppBackRingHeight = 760.00 *fgkmm;
2394 const Double_t kSuppBackRingRext = 760.00 *fgkmm;
2395 const Double_t kSuppBackRingRint = 685.00 *fgkmm;
2396 // const Double_t kSuppBackRingRint2 = 675.00 *fgkmm;
2397 const Double_t kSuppBackRingR10 = 10.00 *fgkmm;
2398 const Double_t kSuppBackRingBase = 739.00 *fgkmm;
2399 const Double_t kSuppBackRingThikAll = 50.00 *fgkmm;
2400 const Double_t kSuppBackRingThick1 = 20.00 *fgkmm;
2401 const Double_t kSuppBackRingThick2 = 20.00 *fgkmm;
2403 // const Double_t kSuppBackRingPlacAng = 10.00 *TMath::DegToRad();
2404 const Double_t kSuppBackRingPlacAng = 10.25 *TMath::DegToRad();//Fix ovlp.
2405 const Double_t kSuppBackRing2ndAng1 = 78.40 *TMath::DegToRad();
2406 const Double_t kSuppBackRing2ndAng2 = 45.00 *TMath::DegToRad();
2408 const Int_t kSuppBackRingNPtsArc = 10; // N.points to approximate arc
2411 const Double_t kRearSuppZTransGlob =(1011.00+9315.00-6040.00) *fgkmm;
2412 const Double_t kBackRodZTrans = 2420.00 *fgkmm;
2414 const Double_t kBackRodLength = 1160.00 *fgkmm;
2415 const Double_t kBackRodThickLen = 20.00 *fgkmm;
2416 const Double_t kBackRodDiameter = 20.00 *fgkmm;
2418 const Double_t kSuppRearRingRint = 360.00 *fgkmm;
2419 const Double_t kSuppRearRingRext1 = 410.00 *fgkmm;
2420 const Double_t kSuppRearRingRext2 = 414.00 *fgkmm;
2421 const Double_t kSuppRearRingHeight = 397.00 *fgkmm;
2422 const Double_t kSuppRearRingTopWide = 111.87 *fgkmm;
2423 const Double_t kSuppRearRingBase = 451.50 *fgkmm;
2424 const Double_t kSuppRearRingBaseHi = 58.00 *fgkmm;
2425 const Double_t kSuppRearRingSideHi = 52.00 *fgkmm;
2426 const Double_t kSuppRearRingInside = 40.00 *fgkmm;
2427 const Double_t kSuppRearRingInsideHi= 12.00 *fgkmm;
2428 const Double_t kSuppRearRingThick = 20.00 *fgkmm;
2429 const Double_t kSuppRearRingXRodHole= 441.50 *fgkmm;
2430 const Double_t kSuppRearRingYRodHole= 42.00 *fgkmm;
2432 const Double_t kSuppRearRing1stAng = 22.00 *TMath::DegToRad();
2433 const Double_t kSuppRearRingStepAng = 15.00 *TMath::DegToRad();
2435 const Int_t kSuppRearRingNPtsArc = 10; // N.points to approximate arc
2439 Double_t xprof[2*(15+kExtSuppRingNPtsArc)],yprof[2*(15+kExtSuppRingNPtsArc)];
2440 Double_t slp1, slp2, phi, xm, ym;
2441 Double_t xloc, yloc, zloc, rmin, rmax, deltaR;
2445 // The whole support as an assembly
2446 TGeoVolumeAssembly *trayASuppStruct = new TGeoVolumeAssembly("ITSsuppSideAStructure");
2449 // First create all needed shapes
2451 // The External Ring (part of 0872/G/A/01): a really complex Xtru
2452 TGeoXtru *extSuppRing = new TGeoXtru(2);
2454 // First the upper notch...
2455 xprof[ 0] = kExtSuppRingSpace1;
2456 yprof[ 0] = kExtSuppRingInnerHi + kExtSuppRingSpcAbov;
2458 slp1 = TMath::Tan(TMath::Pi()/2 - kExtSuppRingSpcAng);
2459 IntersectCircle(slp1, xprof[0], yprof[0], kExtSuppRingRmax, 0., 0.,
2460 xprof[5], yprof[5], xm, ym); // Ignore dummy xm,ym
2462 xprof[ 4] = xprof[5];
2463 yprof[ 4] = yprof[5] - kExtSuppRingR5/TMath::Tan(kExtSuppRingSpcAng);
2464 xprof[ 3] = xprof[4] - kExtSuppRingR5*(1 - TMath::Cos(TMath::Pi()/6));
2465 yprof[ 3] = yprof[4] - kExtSuppRingR5*( TMath::Sin(TMath::Pi()/6));
2466 xprof[ 2] = xprof[4] - kExtSuppRingR5*(1 - TMath::Cos(TMath::Pi()/3));
2467 yprof[ 2] = yprof[4] - kExtSuppRingR5*( TMath::Sin(TMath::Pi()/3));
2468 xprof[ 1] = xprof[4] - kExtSuppRingR5;
2469 yprof[ 1] = yprof[4] - kExtSuppRingR5;
2471 Int_t indx = 5+kExtSuppRingNPtsArc;
2472 // ...then the external arc, approximated with segments,...
2473 xprof[indx] = kExtSuppRingBase;
2474 yprof[indx] = TMath::Sqrt(kExtSuppRingRmax*kExtSuppRingRmax -
2475 kExtSuppRingBase*kExtSuppRingBase);
2476 Double_t alphamin = TMath::ASin(kExtSuppRingSpace2/kExtSuppRingRmax);
2477 Double_t alphamax = TMath::Pi()/2 -
2478 TMath::ASin(yprof[5+kExtSuppRingNPtsArc]/kExtSuppRingRmax);
2480 for (Int_t jp = 1; jp < kExtSuppRingNPtsArc; jp++) {
2481 Double_t alpha = jp*(alphamax-alphamin)/kExtSuppRingNPtsArc;
2482 xprof[5+jp] = kExtSuppRingRmax*TMath::Sin(alpha);
2483 yprof[5+jp] = kExtSuppRingRmax*TMath::Cos(alpha);
2485 // ...and finally the interior profile
2486 xprof[indx+1] = kExtSuppRingBase;
2487 yprof[indx+1] = kSuppRingYTrans;
2488 xprof[indx+2] = xprof[indx+1] - kExtSuppRingInward;
2489 yprof[indx+2] = yprof[indx+1];
2491 phi = TMath::Pi()/2 - 4*kExtSuppRingPartPhi - kExtSuppRingIntAng;
2492 slp1 = TMath::Tan(TMath::Pi() - kExtSuppRingBaseAng);
2493 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2494 xm = kExtSuppRingRint2*TMath::Cos(phi);
2495 ym = kExtSuppRingRint2*TMath::Sin(phi);
2496 IntersectLines(slp1, xprof[indx+2], yprof[indx+2], slp2, xm, ym,
2497 xprof[indx+3], yprof[indx+3]);
2500 phi += kExtSuppRingPartPhi;
2501 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2502 xm = kExtSuppRingRint1*TMath::Cos(phi);
2503 ym = kExtSuppRingRint1*TMath::Sin(phi);
2504 IntersectLines(slp1, xprof[indx+3], yprof[indx+3], slp2, xm, ym,
2505 xprof[indx+4], yprof[indx+4]);
2508 phi += kExtSuppRingPartPhi;
2509 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2510 xm = kExtSuppRingRint2*TMath::Cos(phi);
2511 ym = kExtSuppRingRint2*TMath::Sin(phi);
2512 IntersectLines(slp1, xprof[indx+4], yprof[indx+4], slp2, xm, ym,
2513 xprof[indx+5], yprof[indx+5]);
2516 phi += kExtSuppRingPartPhi;
2517 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2518 xm = kExtSuppRingRint1*TMath::Cos(phi);
2519 ym = kExtSuppRingRint1*TMath::Sin(phi);
2520 IntersectLines(slp1, xprof[indx+5], yprof[indx+5], slp2, xm, ym,
2521 xprof[indx+6], yprof[indx+6]);
2523 xprof[indx+9] = kExtSuppRingInWide;
2524 yprof[indx+9] = kExtSuppRingInnerHi;
2525 xprof[indx+8] = xprof[indx+9] +
2526 (1 - TMath::Cos(kExtSuppRingR7Ang/2))*kExtSuppRingR7;
2527 yprof[indx+8] = yprof[indx+9] +
2528 ( TMath::Sin(kExtSuppRingR7Ang/2))*kExtSuppRingR7;
2529 xprof[indx+7] = xprof[indx+9] +
2530 (1 + TMath::Cos(kExtSuppRingR7Ang ))*kExtSuppRingR7;
2531 yprof[indx+7] = yprof[indx+9] +
2532 ( TMath::Sin(kExtSuppRingR7Ang ))*kExtSuppRingR7;
2533 // Gosh, we did the right side! now reflex on the left side
2534 npoints = (sizeof(xprof)/sizeof(Double_t))/2;
2535 for (Int_t jp = 0; jp < npoints; jp++) {
2536 xprof[npoints+jp] = -xprof[npoints-1-jp];
2537 yprof[npoints+jp] = yprof[npoints-1-jp];
2539 // wow! now the actual Xtru
2540 extSuppRing->DefinePolygon(2*npoints, xprof, yprof);
2541 extSuppRing->DefineSection(0,0);
2542 extSuppRing->DefineSection(1,kExtSuppRingThick);
2544 // The Internal Ring (part of 0872/G/A/01): another complex Xtru
2545 TGeoXtru *intSuppRing = new TGeoXtru(2);
2547 // First the external profile...
2551 phi = TMath::Pi()/2 - kExtSuppRingPartPhi - kExtSuppRingIntAng;
2552 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2553 xm = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Cos(phi);
2554 ym = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Sin(phi);
2555 IntersectLines(slp1, 0, kExtSuppRingInnerHi+kExtSuppRingSpcAbov,
2557 xprof[npoints], yprof[npoints]);
2561 phi -= kExtSuppRingPartPhi;
2562 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2563 xm = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Cos(phi);
2564 ym = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Sin(phi);
2565 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2567 xprof[npoints], yprof[npoints]);
2571 phi -= kExtSuppRingPartPhi;
2572 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2573 xm = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Cos(phi);
2574 ym = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Sin(phi);
2575 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2577 xprof[npoints], yprof[npoints]);
2581 phi -= kExtSuppRingPartPhi;
2582 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2583 xm = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Cos(phi);
2584 ym = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Sin(phi);
2585 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2587 xprof[npoints], yprof[npoints]);
2590 xprof[npoints] = kExtSuppRingBase-kIntSuppRingInward;
2591 yprof[npoints] = Yfrom2Points(xprof[npoints-1], yprof[npoints-1], xm, ym,
2595 xprof[npoints] = xprof[npoints-1];
2596 yprof[npoints] = kSuppRingYTrans;
2598 // ...and then the interior profile, which is identical to extSuppRing one
2599 for (Int_t jp=0; jp < 8; jp++) {
2600 xprof[npoints] = extSuppRing->GetX(17+jp);
2601 yprof[npoints] = extSuppRing->GetY(17+jp);
2604 // We did the right side! now reflex on the left side
2605 for (Int_t jp = 0; jp < npoints; jp++) {
2606 xprof[npoints+jp] = -xprof[npoints-1-jp];
2607 yprof[npoints+jp] = yprof[npoints-1-jp];
2609 // And now the actual Xtru
2610 intSuppRing->DefinePolygon(2*npoints, xprof, yprof);
2611 intSuppRing->DefineSection(0,0);
2612 intSuppRing->DefineSection(1,kIntSuppRingThick);
2614 // The intermediate cylinder (0872/G/A/03): a TubeSeg
2615 alphamin = TMath::ASin(kSuppCylDispl/kSuppCylRint)*TMath::RadToDeg();
2616 alphamax = 180 - alphamin;
2617 TGeoTubeSeg *interCylind = new TGeoTubeSeg(kSuppCylRint, kSuppCylRext,
2618 kSuppCylHeight/2, alphamin, alphamax);
2620 // The spacer (0872/G/A/03): a simple Xtru
2621 TGeoXtru *suppSpacer = new TGeoXtru(2);
2623 xprof[0] = kSuppSpacerHeight;
2624 yprof[0] = kSuppSpacerThick;
2625 xprof[1] = xprof[0];
2629 xprof[3] = kSuppSpacerThick*SinD(kSuppSpacerAngle);
2630 yprof[3] = yprof[0];
2632 suppSpacer->DefinePolygon(4, xprof, yprof);
2633 suppSpacer->DefineSection(0,-kSuppCylHeight/2);
2634 suppSpacer->DefineSection(1, kSuppCylHeight/2);
2636 // The forward ring (0872/G/B/02): a Pcon (slight oversimplification)
2637 Double_t rmean = (kSuppForwRingRint1+kSuppForwRingRext)/2;
2638 alphamin = TMath::ASin(kSuppForwYTrans/rmean)*TMath::RadToDeg();
2639 alphamax = 180 - alphamin;
2641 TGeoPcon *forwardRing = new TGeoPcon(alphamin,alphamax-alphamin,4);
2643 forwardRing->DefineSection(0,0,
2644 kSuppForwRingRint1,kSuppForwRingRext);
2645 forwardRing->DefineSection(1,kSuppForwRingThikInt,
2646 kSuppForwRingRint1,kSuppForwRingRext);
2647 forwardRing->DefineSection(2,kSuppForwRingThikInt,
2648 kSuppForwRingRint2,kSuppForwRingRext);
2649 forwardRing->DefineSection(3,kSuppForwRingThikAll,
2650 kSuppForwRingRint2,kSuppForwRingRext);
2652 // The forward cone (0872/G/B/03): a TGeoPcon
2653 TGeoPcon *forwardCone = new TGeoPcon(alphamin,alphamax-alphamin,3);
2655 forwardCone->DefineSection(0,0,
2656 kSuppForwConeRmin-kSuppForwConeThick,
2658 forwardCone->DefineSection(1,kSuppForwConeLen1,
2659 kSuppForwConeRmin-kSuppForwConeThick,
2661 forwardCone->DefineSection(2,kSuppForwConeLen1+kSuppForwConeLen2,
2662 kSuppForwConeRmax-kSuppForwConeThick,
2665 // The first part of the Back Ring (part of 0872/G/B/01): a complex Xtru
2666 TGeoXtru *firstSuppBackRing = new TGeoXtru(2);
2668 // First the external profile... (the arc is approximated with segments)
2671 xprof[npoints] = kSuppBackRingPlacTop;
2672 yprof[npoints] = kSuppBackRingHeight;
2675 alphamax = TMath::Pi()/2 - TMath::ASin(kSuppBackRingPlacTop/kSuppBackRingRext);
2676 alphamin = TMath::ASin((kSuppForwYTrans+kSuppBackRingPlacSid)/kSuppBackRingRext);
2678 xprof[npoints] = xprof[npoints-1];
2679 yprof[npoints] = kSuppBackRingRext*TMath::Sin(alphamax);
2682 for (Int_t jp = 1; jp <= kSuppBackRingNPtsArc; jp++) {
2683 Double_t alpha = alphamax - jp*(alphamax-alphamin)/kSuppBackRingNPtsArc;
2684 xprof[npoints] = kSuppBackRingRext*TMath::Cos(alpha);
2685 yprof[npoints] = kSuppBackRingRext*TMath::Sin(alpha);
2689 xprof[npoints] = kSuppBackRingBase -
2690 kSuppBackRingPlacSid*TMath::Tan(kSuppBackRingPlacAng);
2691 yprof[npoints] = yprof[npoints-1];
2694 xprof[npoints] = kSuppBackRingBase;
2695 yprof[npoints] = kSuppForwYTrans;
2697 // ...then the internal profile (the arc is approximated with segments)
2698 alphamin = TMath::ASin(kSuppForwYTrans/kSuppBackRingRint);
2699 alphamax = TMath::Pi()/2;
2701 for (Int_t jp = 0; jp < kSuppBackRingNPtsArc; jp++) {
2702 Double_t alpha = alphamin + jp*(alphamax-alphamin)/kSuppBackRingNPtsArc;
2703 xprof[npoints] = kSuppBackRingRint*TMath::Cos(alpha);
2704 yprof[npoints] = kSuppBackRingRint*TMath::Sin(alpha);
2709 yprof[npoints] = kSuppBackRingRint;
2711 // We did the right side! now reflex on the left side (except last point)
2712 for (Int_t jp = 0; jp < npoints-1; jp++) {
2713 xprof[npoints+jp] = -xprof[npoints-jp-2];
2714 yprof[npoints+jp] = yprof[npoints-jp-2];
2716 // And now the actual Xtru
2717 firstSuppBackRing->DefinePolygon(2*npoints-1, xprof, yprof);
2718 firstSuppBackRing->DefineSection(0,0);
2719 firstSuppBackRing->DefineSection(1,kSuppBackRingThick1);
2721 // The second part of the Back Ring (part of 0872/G/B/01): a Pcon
2722 // (slight oversimplification)
2723 alphamin = TMath::ASin(kSuppForwYTrans/kSuppBackRingRint)*TMath::RadToDeg();
2724 alphamax = 180 - alphamin;
2726 TGeoPcon *secondSuppBackRing = new TGeoPcon(alphamin,alphamax-alphamin,6);
2728 deltaR = kSuppBackRingThick2/TMath::Sin(kSuppBackRing2ndAng1);
2729 rmin = kSuppBackRingRint - kSuppBackRingThick1/TMath::Tan(kSuppBackRing2ndAng1);
2730 rmax = rmin + deltaR + kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1);
2731 secondSuppBackRing->DefineSection(0, 0, rmin, rmax);
2733 zloc = kSuppBackRingR10*(1 - TMath::Cos(kSuppBackRing2ndAng1/3));
2734 rmax -= kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1/3);
2735 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2736 secondSuppBackRing->DefineSection(1, zloc, rmin, rmax);
2738 zloc = kSuppBackRingR10*(1 - TMath::Cos(kSuppBackRing2ndAng1*2/3));
2739 rmax = secondSuppBackRing->GetRmax(0) - kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1*2/3);
2740 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2741 secondSuppBackRing->DefineSection(2, zloc, rmin, rmax);
2743 zloc = kSuppBackRingR10*(1 - TMath::Cos(kSuppBackRing2ndAng1));
2744 rmax = secondSuppBackRing->GetRmax(0) - kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1);
2745 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2746 secondSuppBackRing->DefineSection(3, zloc, rmin, rmax);
2748 slp1 = TMath::Tan(kSuppBackRing2ndAng2);
2749 slp2 = TMath::Tan(TMath::Pi()/2 + kSuppBackRing2ndAng1);
2750 IntersectLines(-slp1,kSuppBackRingThikAll,deltaR/2,
2751 slp2,kSuppBackRingThikAll,deltaR,
2754 zloc = xm - kSuppBackRingThick1;
2755 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2756 rmax = rmin + deltaR;
2757 secondSuppBackRing->DefineSection(4, zloc, rmin, rmax);
2759 zloc = kSuppBackRingThikAll - kSuppBackRingThick1;
2760 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2761 rmax = rmin + deltaR/2;
2762 secondSuppBackRing->DefineSection(5, zloc, rmin, rmax);
2764 // The supporting rod: a Tube
2765 TGeoTube *suppRod = new TGeoTube(0, kBackRodDiameter/2,
2766 (kBackRodLength - kBackRodThickLen)/2);
2768 // The Back Ring (0872/G/C/01): another complex Xtru
2769 TGeoXtru *suppRearRing = new TGeoXtru(2);
2771 // First the external profile...
2774 xprof[npoints] = kSuppRearRingTopWide;
2775 yprof[npoints] = kSuppRearRingHeight;
2778 phi = kSuppRearRing1stAng;
2779 slp1 = TMath::Tan(TMath::Pi() - phi);
2780 phi += kSuppRearRingStepAng;
2781 slp2 = TMath::Tan(TMath::Pi() - phi);
2782 xm = kSuppRearRingRext2*TMath::Sin(phi);
2783 ym = kSuppRearRingRext2*TMath::Cos(phi);
2784 IntersectLines(slp1, kSuppRearRingTopWide, kSuppRearRingHeight,
2786 xprof[npoints], yprof[npoints]);
2790 phi += kSuppRearRingStepAng;
2791 slp2 = TMath::Tan(TMath::Pi() - phi);
2792 xm = kSuppRearRingRext1*TMath::Sin(phi);
2793 ym = kSuppRearRingRext1*TMath::Cos(phi);
2794 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2796 xprof[npoints], yprof[npoints]);
2800 phi += kSuppRearRingStepAng;
2801 slp2 = TMath::Tan(TMath::Pi() - phi);
2802 xm = kSuppRearRingRext2*TMath::Sin(phi);
2803 ym = kSuppRearRingRext2*TMath::Cos(phi);
2804 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2806 xprof[npoints], yprof[npoints]);
2811 xm = kSuppRearRingBase;
2812 ym = kSuppRearRingBaseHi + kSuppRearRingSideHi;
2813 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2815 xprof[npoints], yprof[npoints]);
2818 xprof[npoints] = kSuppRearRingBase;
2819 yprof[npoints] = kSuppRearRingBaseHi + kSuppRearRingSideHi;
2821 xprof[npoints] = xprof[npoints - 1];
2822 yprof[npoints] = kSuppRearRingBaseHi;
2824 xprof[npoints] = xprof[npoints - 1] - kSuppRearRingInside;
2825 yprof[npoints] = yprof[npoints - 1];
2827 xprof[npoints] = xprof[npoints - 1];
2828 yprof[npoints] = yprof[npoints - 1] + kSuppRearRingInsideHi;
2830 // ...then the internal arc, approximated with segments,...
2831 xprof[npoints] = kSuppRearRingRint;
2832 yprof[npoints] = yprof[npoints - 1];
2834 alphamin = TMath::ASin(kSuppRearRingBaseHi/kSuppRearRingRint);
2835 alphamax = TMath::Pi()/2;
2837 for (Int_t jp = 1; jp < kSuppRearRingNPtsArc; jp++) {
2838 Double_t alpha = alphamin + jp*(alphamax-alphamin)/kSuppRearRingNPtsArc;
2839 xprof[npoints+jp] = kSuppRearRingRint*TMath::Cos(alpha);
2840 yprof[npoints+jp] = kSuppRearRingRint*TMath::Sin(alpha);
2843 xprof[npoints+kSuppRearRingNPtsArc] = 0;
2844 yprof[npoints+kSuppRearRingNPtsArc] = kSuppRearRingRint;
2845 // We did the right side! now reflex on the left side
2846 Int_t nTotalPoints = npoints+kSuppRearRingNPtsArc;
2847 for (Int_t jp = 0; jp < nTotalPoints; jp++) {
2848 xprof[nTotalPoints+1+jp] = -xprof[nTotalPoints-1-jp];
2849 yprof[nTotalPoints+1+jp] = yprof[nTotalPoints-1-jp];
2852 // And now the actual Xtru
2853 suppRearRing->DefinePolygon(2*nTotalPoints+1, xprof, yprof);
2854 suppRearRing->DefineSection(0,0);
2855 suppRearRing->DefineSection(1,kSuppRearRingThick);
2858 // We have all shapes: now create the real volumes
2859 TGeoMedium *medAl = mgr->GetMedium("ITS_ANTICORODAL$");
2861 TGeoVolume *sideAExtSuppRing = new TGeoVolume("ITSsuppSideAExtSuppRing",
2862 extSuppRing, medAl);
2864 sideAExtSuppRing->SetVisibility(kTRUE);
2865 sideAExtSuppRing->SetLineColor(kMagenta+1);
2866 sideAExtSuppRing->SetLineWidth(1);
2867 sideAExtSuppRing->SetFillColor(sideAExtSuppRing->GetLineColor());
2868 sideAExtSuppRing->SetFillStyle(4000); // 0% transparent
2870 TGeoVolume *sideAIntSuppRing = new TGeoVolume("ITSsuppSideAIntSuppRing",
2871 intSuppRing, medAl);
2873 sideAIntSuppRing->SetVisibility(kTRUE);
2874 sideAIntSuppRing->SetLineColor(kMagenta+1);
2875 sideAIntSuppRing->SetLineWidth(1);
2876 sideAIntSuppRing->SetFillColor(sideAIntSuppRing->GetLineColor());
2877 sideAIntSuppRing->SetFillStyle(4000); // 0% transparent
2879 TGeoVolume *sideASuppCyl = new TGeoVolume("ITSsuppSideASuppCyl",
2880 interCylind, medAl);
2882 sideASuppCyl->SetVisibility(kTRUE);
2883 sideASuppCyl->SetLineColor(kMagenta+1);
2884 sideASuppCyl->SetLineWidth(1);
2885 sideASuppCyl->SetFillColor(sideASuppCyl->GetLineColor());
2886 sideASuppCyl->SetFillStyle(4000); // 0% transparent
2888 TGeoVolume *sideASuppSpacer = new TGeoVolume("ITSsuppSideASuppSpacer",
2891 sideASuppSpacer->SetVisibility(kTRUE);
2892 sideASuppSpacer->SetLineColor(kMagenta+1);
2893 sideASuppSpacer->SetLineWidth(1);
2894 sideASuppSpacer->SetFillColor(sideASuppSpacer->GetLineColor());
2895 sideASuppSpacer->SetFillStyle(4000); // 0% transparent
2897 TGeoVolume *sideASuppForwRing = new TGeoVolume("ITSsuppSideASuppForwRing",
2898 forwardRing, medAl);
2900 sideASuppForwRing->SetVisibility(kTRUE);
2901 sideASuppForwRing->SetLineColor(kMagenta+1);
2902 sideASuppForwRing->SetLineWidth(1);
2903 sideASuppForwRing->SetFillColor(sideASuppForwRing->GetLineColor());
2904 sideASuppForwRing->SetFillStyle(4000); // 0% transparent
2906 TGeoVolume *sideASuppForwCone = new TGeoVolume("ITSsuppSideASuppForwCone",
2907 forwardCone, medAl);
2909 sideASuppForwCone->SetVisibility(kTRUE);
2910 sideASuppForwCone->SetLineColor(kMagenta+1);
2911 sideASuppForwCone->SetLineWidth(1);
2912 sideASuppForwCone->SetFillColor(sideASuppForwCone->GetLineColor());
2913 sideASuppForwCone->SetFillStyle(4000); // 0% transparent
2915 TGeoVolume *sideAFirstSuppBackRing = new TGeoVolume("ITSsuppSideAFirstSuppBackRing",
2916 firstSuppBackRing, medAl);
2918 sideAFirstSuppBackRing->SetVisibility(kTRUE);
2919 sideAFirstSuppBackRing->SetLineColor(kMagenta+1);
2920 sideAFirstSuppBackRing->SetLineWidth(1);
2921 sideAFirstSuppBackRing->SetFillColor(sideAFirstSuppBackRing->GetLineColor());
2922 sideAFirstSuppBackRing->SetFillStyle(4000); // 0% transparent
2924 TGeoVolume *sideASecondSuppBackRing = new TGeoVolume("ITSsuppSideASecondSuppBackRing",
2925 secondSuppBackRing, medAl);
2927 sideASecondSuppBackRing->SetVisibility(kTRUE);
2928 sideASecondSuppBackRing->SetLineColor(kMagenta+1);
2929 sideASecondSuppBackRing->SetLineWidth(1);
2930 sideASecondSuppBackRing->SetFillColor(sideASecondSuppBackRing->GetLineColor());
2931 sideASecondSuppBackRing->SetFillStyle(4000); // 0% transparent
2933 TGeoVolume *sideASuppRod = new TGeoVolume("ITSsuppSideASuppRod",
2936 sideASuppRod->SetVisibility(kTRUE);
2937 sideASuppRod->SetLineColor(kMagenta+1);
2938 sideASuppRod->SetLineWidth(1);
2939 sideASuppRod->SetFillColor(sideASuppRod->GetLineColor());
2940 sideASuppRod->SetFillStyle(4000); // 0% transparent
2942 TGeoVolume *sideASuppRearRing = new TGeoVolume("ITSsuppSideASuppRearRing",
2943 suppRearRing, medAl);
2945 sideASuppRearRing->SetVisibility(kTRUE);
2946 sideASuppRearRing->SetLineColor(kMagenta+1);
2947 sideASuppRearRing->SetLineWidth(1);
2948 sideASuppRearRing->SetFillColor(sideASuppRearRing->GetLineColor());
2949 sideASuppRearRing->SetFillStyle(4000); // 0% transparent
2952 // Now build up the support structure
2953 zloc = kSuppRingZTrans;
2954 trayASuppStruct->AddNode(sideAExtSuppRing, 1,
2955 new TGeoTranslation(0, 0, zloc) );
2956 trayASuppStruct->AddNode(sideAExtSuppRing, 2,
2957 new TGeoCombiTrans( 0, 0, zloc,
2958 new TGeoRotation("",180,0,0)));
2960 zloc += kExtSuppRingThick;
2961 trayASuppStruct->AddNode(sideAIntSuppRing, 1,
2962 new TGeoTranslation(0, 0, zloc) );
2963 trayASuppStruct->AddNode(sideAIntSuppRing, 2,
2964 new TGeoCombiTrans( 0, 0, zloc,
2965 new TGeoRotation("",180,0,0)));
2967 xloc = kExtSuppRingBase - kIntSuppRingInward;
2968 yloc = kSuppRingYTrans;
2969 zloc += (kIntSuppRingThick + kSuppCylHeight/2);
2970 trayASuppStruct->AddNode(sideASuppCyl, 1,
2971 new TGeoTranslation(0, 0, zloc) );
2972 trayASuppStruct->AddNode(sideASuppCyl, 2,
2973 new TGeoCombiTrans( 0, 0, zloc,
2974 new TGeoRotation("",180,0,0)));
2975 trayASuppStruct->AddNode(sideASuppSpacer, 1,
2976 new TGeoCombiTrans( xloc, yloc, zloc,
2977 new TGeoRotation("",90+kSuppSpacerAngle,0,0)));
2978 trayASuppStruct->AddNode(sideASuppSpacer, 2,
2979 new TGeoCombiTrans(-xloc, yloc, zloc,
2980 new TGeoRotation("",0,180,kSuppSpacerAngle-90)));
2981 trayASuppStruct->AddNode(sideASuppSpacer, 3,
2982 new TGeoCombiTrans( xloc,-yloc, zloc,
2983 new TGeoRotation("",180,180,kSuppSpacerAngle-90)));
2984 trayASuppStruct->AddNode(sideASuppSpacer, 4,
2985 new TGeoCombiTrans(-xloc,-yloc, zloc,
2986 new TGeoRotation("",270+kSuppSpacerAngle,0,0)));
2989 zloc += kSuppCylHeight/2;
2990 trayASuppStruct->AddNode(sideAIntSuppRing, 3,
2991 new TGeoTranslation(0, 0, zloc) );
2992 trayASuppStruct->AddNode(sideAIntSuppRing, 4,
2993 new TGeoCombiTrans( 0, 0, zloc,
2994 new TGeoRotation("",180,0,0)));
2996 zloc += kIntSuppRingThick;
2997 trayASuppStruct->AddNode(sideAExtSuppRing, 3,
2998 new TGeoTranslation(0, 0, zloc) );
2999 trayASuppStruct->AddNode(sideAExtSuppRing, 4,
3000 new TGeoCombiTrans( 0, 0, zloc,
3001 new TGeoRotation("",180,0,0)));
3003 zloc += kExtSuppRingThick;
3004 trayASuppStruct->AddNode(sideASuppForwRing, 1,
3005 new TGeoTranslation(0, 0, zloc) );
3006 trayASuppStruct->AddNode(sideASuppForwRing, 2,
3007 new TGeoCombiTrans( 0, 0, zloc,
3008 new TGeoRotation("",180,0,0)));
3010 zloc += kSuppForwRingThikAll;
3011 trayASuppStruct->AddNode(sideASuppForwCone, 1,
3012 new TGeoTranslation(0, 0, zloc) );
3013 trayASuppStruct->AddNode(sideASuppForwCone, 2,
3014 new TGeoCombiTrans( 0, 0, zloc,
3015 new TGeoRotation("",180,0,0)));
3017 zloc += (kSuppForwConeLen1+kSuppForwConeLen2);
3018 trayASuppStruct->AddNode(sideAFirstSuppBackRing, 1,
3019 new TGeoTranslation(0, 0, zloc) );
3020 trayASuppStruct->AddNode(sideAFirstSuppBackRing, 2,
3021 new TGeoCombiTrans( 0, 0, zloc,
3022 new TGeoRotation("",180,0,0)));
3024 zloc += kSuppBackRingThick1;
3025 trayASuppStruct->AddNode(sideASecondSuppBackRing, 1,
3026 new TGeoTranslation(0, 0, zloc) );
3027 trayASuppStruct->AddNode(sideASecondSuppBackRing, 2,
3028 new TGeoCombiTrans( 0, 0, zloc,
3029 new TGeoRotation("",180,0,0)));
3031 xloc = kSuppRearRingXRodHole;
3032 yloc = kSuppRearRingBaseHi + kSuppRearRingYRodHole;
3033 zloc = kRearSuppZTransGlob - kBackRodZTrans + suppRod->GetDz();
3034 trayASuppStruct->AddNode(sideASuppRod, 1,
3035 new TGeoTranslation( xloc, yloc, zloc) );
3036 trayASuppStruct->AddNode(sideASuppRod, 2,
3037 new TGeoTranslation(-xloc, yloc, zloc) );
3038 trayASuppStruct->AddNode(sideASuppRod, 3,
3039 new TGeoTranslation( xloc,-yloc, zloc) );
3040 trayASuppStruct->AddNode(sideASuppRod, 4,
3041 new TGeoTranslation(-xloc,-yloc, zloc) );
3043 zloc += suppRod->GetDz();
3044 trayASuppStruct->AddNode(sideASuppRearRing, 1,
3045 new TGeoTranslation( 0, 0, zloc) );
3046 trayASuppStruct->AddNode(sideASuppRearRing, 2,
3047 new TGeoCombiTrans( 0, 0, zloc,
3048 new TGeoRotation("",180,0,0)));
3051 // Finally put everything in the mother volume
3052 moth->AddNode(trayASuppStruct,1,0);
3057 //______________________________________________________________________
3058 void AliITSv11GeometrySupport::ServicesCableSupportSPD(TGeoVolume *moth,
3061 // Creates the all SPD cable trays which are outside the ITS support cones
3062 // but still inside the TPC
3063 // In order to avoid a huge monolithic routine, this method actually
3064 // calls inner methods to create and assemble the various (macro)pieces
3067 // moth : the TGeoVolume owing the volume structure
3068 // mgr : the GeoManager (default gGeoManager)
3071 // Created: ??? Bjorn S. Nilsen
3072 // Updated: 15 Nov 2009 Mario Sitta
3074 // Technical data are taken from AutoCAD drawings and other (oral)
3075 // information given by F.Tosello
3078 SPDCableTraysSideA(moth, mgr);
3079 SPDCableTraysSideC(moth, mgr);
3083 //______________________________________________________________________
3084 void AliITSv11GeometrySupport::ServicesCableSupportSDD(TGeoVolume *moth,
3087 // Creates the all SDD cable trays which are outside the ITS support cones
3088 // but still inside the TPC
3089 // In order to avoid a huge monolithic routine, this method actually
3090 // calls inner methods to create and assemble the various (macro)pieces
3093 // moth : the TGeoVolume owing the volume structure
3094 // mgr : the GeoManager (default gGeoManager)
3097 // Created: 14 Dec 2009 Mario Sitta
3100 SDDCableTraysSideA(moth, mgr);
3101 SDDCableTraysSideC(moth, mgr);
3106 //______________________________________________________________________
3107 void AliITSv11GeometrySupport::ServicesCableSupportSSD(TGeoVolume *moth,
3110 // Creates the SSD cable trays which are outside the ITS support cones
3111 // but still inside the TPC
3112 // In order to avoid a huge monolithic routine, this method actually
3113 // calls inner methods to create and assemble the various (macro)pieces
3116 // moth : the TGeoVolume owing the volume structure
3117 // mgr : the GeoManager (default gGeoManager)
3120 // Created: 15 Nov 2009 Mario Sitta
3123 SSDCableTraysSideA(moth, mgr);
3124 SSDCableTraysSideC(moth, mgr);
3129 //______________________________________________________________________
3130 void AliITSv11GeometrySupport::SPDCableTraysSideA(TGeoVolume *moth,
3133 // Creates the SPD cable trays which are outside the ITS support cones
3134 // but still inside the TPC on Side A
3135 // (part of this code is taken or anyway inspired to ServicesCableSupport
3136 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
3139 // moth : the TGeoVolume owing the volume structure
3140 // mgr : the GeoManager (default gGeoManager)
3143 // Created: 15 Feb 2010 Mario Sitta
3145 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
3146 // drawings and other (oral) information given by F.Tosello and D.Elia
3147 // (small differences with blueprints - e.g. -0.07mm in R1Trans and
3148 // R2Trans - fix small overlaps; they are then compensated in positioning
3149 // the Rear Tray to avoid its own overlaps with the rear supporting ring)
3150 // Optical cables and low voltage cables are approximated with mean
3151 // materials and square cross sections, but preserving the total material
3155 // Overall position and rotation of the A-Side Cable Trays
3156 // (parts of 0872/G/D)
3157 const Double_t kTrayAR1Trans = 396.93 *fgkmm;
3158 const Double_t kTrayAR2Trans = 413.93 *fgkmm;
3159 const Double_t kTrayAZTrans = 1011.00 *fgkmm;
3160 const Double_t kTrayAZRot = (180-169.5);// Degrees
3161 const Double_t kTrayAFirstRotAng = 22.00; // Degrees
3162 const Double_t kTrayASecondRotAng = 15.00; // Degrees
3164 const Double_t kForwardTrayWide = 94.00 *fgkmm;//!!!TO BE CHECKED!!!
3165 const Double_t kForwardTrayFirstHigh = 83.00 *fgkmm;//!!!TO BE CHECKED!!!
3166 const Double_t kForwardTraySecondHigh = 52.70 *fgkmm;//!!!TO BE CHECKED!!!
3167 const Double_t kForwardTrayTotalLen = 853.00 *fgkmm;
3168 const Double_t kForwardTrayFirstLen = 435.00 *fgkmm;
3169 const Double_t kForwardTrayWingWide = 16.00 *fgkmm;//!!!TO BE CHECKED!!!
3170 const Double_t kForwardTrayInterSpace = 18.00 *fgkmm;//!!!TO BE CHECKED!!!
3171 const Double_t kForwardTrayThick = 2.00 *fgkmm;
3173 const Int_t kForwardSideNpoints = 6;
3175 const Double_t kExternalTrayLen = 1200.00 *fgkmm;
3176 const Double_t kExternalTrayWide = kForwardTrayWide;
3177 const Double_t kExternalTrayHigh = kForwardTraySecondHigh;
3178 const Double_t kExternalTrayThick = kForwardTrayThick;
3180 const Double_t kCoolingTubeRmin = 5.00 *fgkmm;
3181 const Double_t kCoolingTubeRmax = 6.00 *fgkmm;
3183 const Double_t kOpticalFibersSect = 8.696*fgkmm;//!!!ESTIMATED!!!
3184 const Double_t kLowVoltageCableSect = 3.412*fgkmm;//!!!ESTIMATED!!!
3187 Double_t xprof[kForwardSideNpoints], yprof[kForwardSideNpoints];
3188 Double_t xloc, yloc, zloc, alpharot;
3191 // The two tray components as assemblies
3192 TGeoVolumeAssembly *cableTrayAForw =
3193 new TGeoVolumeAssembly("ITSsupportSPDTrayAForwRear");
3194 TGeoVolumeAssembly *cableTrayAExt =
3195 new TGeoVolumeAssembly("ITSsupportSPDTrayAExt");
3198 // First create all needed shapes
3200 // The lower face of the forward tray: a BBox
3201 TGeoBBox *forwTrayLowerFace = new TGeoBBox(kForwardTrayWide/2,
3202 kForwardTrayThick/2,
3203 kForwardTrayTotalLen/2);
3205 // The side face of the forward tray: a Xtru
3206 TGeoXtru *forwTraySideFace = new TGeoXtru(2);
3207 forwTraySideFace->SetName("ITSsuppSPDForwTraySide");
3210 yprof[0] = kForwardTrayThick;
3211 xprof[1] = kForwardTrayTotalLen;
3212 yprof[1] = yprof[0];
3213 xprof[2] = xprof[1];
3214 yprof[2] = kForwardTraySecondHigh - kForwardTrayThick;
3215 xprof[3] = kForwardTrayFirstLen;
3216 yprof[3] = yprof[2];
3217 xprof[4] = xprof[3];
3218 yprof[4] = kForwardTrayFirstHigh - kForwardTrayThick;
3219 xprof[5] = xprof[0];
3220 yprof[5] = yprof[4];
3222 forwTraySideFace->DefinePolygon(6, xprof, yprof);
3223 forwTraySideFace->DefineSection(0, 0);
3224 forwTraySideFace->DefineSection(1, kForwardTrayThick);
3226 // The covers of the forward tray: two BBox's
3227 TGeoBBox *forwTrayShortCover = new TGeoBBox(kForwardTrayWide/2,
3228 kForwardTrayThick/2,
3229 kForwardTrayFirstLen/2);
3231 TGeoBBox *forwTrayLongCover = new TGeoBBox(kForwardTrayWide/2,
3232 kForwardTrayThick/2,
3233 (kForwardTrayTotalLen - kForwardTrayFirstLen)/2);
3235 // Each small wing of the forward tray: a BBox
3236 TGeoBBox *forwTrayWing = new TGeoBBox(kForwardTrayWingWide/2,
3237 (kForwardTrayFirstHigh-kForwardTraySecondHigh)/2,
3238 kForwardTrayThick/2);
3240 // The internal plane of the forward tray: a BBox
3241 TGeoBBox *forwTrayPlane = new TGeoBBox(kForwardTrayWide/2-kForwardTrayThick,
3242 kForwardTrayThick/2,
3243 kForwardTrayTotalLen/2);
3245 // The internal wall of the forward tray: a BBox
3246 TGeoBBox *forwTrayWall = new TGeoBBox(kForwardTrayThick/2,
3247 (kForwardTrayInterSpace-kForwardTrayThick)/2,
3248 kForwardTrayTotalLen/2);
3250 // Each horizontal face of the external tray: a BBox
3251 TGeoBBox *extTrayHorFace = new TGeoBBox(kExternalTrayWide/2-kExternalTrayThick,
3252 kExternalTrayThick/2,
3253 kExternalTrayLen/2);
3255 // Each vertical face of the external tray: a BBox
3256 TGeoBBox *extTrayVerFace = new TGeoBBox(kExternalTrayThick/2,
3257 kExternalTrayHigh/2,
3258 kExternalTrayLen/2);
3260 // The internal wall of the external tray: a BBox
3261 TGeoBBox *extTrayWall = new TGeoBBox(kExternalTrayThick/2,
3262 (kForwardTrayInterSpace-kExternalTrayThick)/2,
3263 kExternalTrayLen/2);
3265 // The cooling tube inside the forward tray: a TubeSeg
3266 Double_t zelong = (kForwardTraySecondHigh - 2*kForwardTrayThick
3267 - 2*forwTrayWall->GetDY() - kCoolingTubeRmax)*SinD(kTrayAZRot);
3268 Double_t zlen = (zelong + kForwardTrayTotalLen)/2;
3269 TGeoTubeSeg *coolTubeForw = new TGeoTubeSeg(kCoolingTubeRmin,
3270 kCoolingTubeRmax, zlen, 0, 360);
3272 // The cooling tube inside the external tray: a Ctub
3273 TGeoCtub *coolTubeExt = new TGeoCtub(kCoolingTubeRmin, kCoolingTubeRmax,
3274 kExternalTrayLen/2, 0, 360,
3275 0, SinD(kTrayAZRot),-CosD(kTrayAZRot),
3278 // The optical fibers inside the forward tray: a BBox
3279 TGeoBBox *optFibsForw = new TGeoBBox(kOpticalFibersSect/2,
3280 kOpticalFibersSect/2,
3281 kForwardTrayTotalLen/2);
3283 // The optical fibers inside the external tray: a Xtru
3284 TGeoXtru *optFibsExt = new TGeoXtru(2);
3285 optFibsExt->SetName("ITSsuppSPDExtTrayOptFibs");
3287 yprof[0] = -kExternalTrayHigh + 2*kExternalTrayThick
3288 + 2*forwTrayWall->GetDY();
3289 xprof[0] = yprof[0]*TanD(kTrayAZRot);
3290 xprof[1] = kExternalTrayLen;
3291 yprof[1] = yprof[0];
3292 xprof[2] = xprof[1];
3293 yprof[2] = yprof[1] + kOpticalFibersSect;
3294 yprof[3] = yprof[2];
3295 xprof[3] = yprof[2]*TanD(kTrayAZRot);
3297 optFibsExt->DefinePolygon(4, xprof, yprof);
3298 optFibsExt->DefineSection(0, 0);
3299 optFibsExt->DefineSection(1, kOpticalFibersSect);
3301 // The Low Voltage cables inside the forward tray: a BBox
3302 TGeoBBox *lowCablesForw = new TGeoBBox(kLowVoltageCableSect/2,
3303 kLowVoltageCableSect/2,
3304 kForwardTrayTotalLen/2);
3306 // The Low Voltage inside the external tray: a Xtru
3307 TGeoXtru *lowCablesExt = new TGeoXtru(2);
3308 lowCablesExt->SetName("ITSsuppSPDExtTrayLowVoltage");
3310 yprof[0] = -kExternalTrayHigh + 2*kExternalTrayThick
3311 + 2*forwTrayWall->GetDY();
3312 xprof[0] = yprof[0]*TanD(kTrayAZRot);
3313 xprof[1] = kExternalTrayLen;
3314 yprof[1] = yprof[0];
3315 xprof[2] = xprof[1];
3316 yprof[2] = yprof[1] + kLowVoltageCableSect;
3317 yprof[3] = yprof[2];
3318 xprof[3] = yprof[2]*TanD(kTrayAZRot);
3320 lowCablesExt->DefinePolygon(4, xprof, yprof);
3321 lowCablesExt->DefineSection(0, 0);
3322 lowCablesExt->DefineSection(1, kLowVoltageCableSect);
3325 // We have all shapes: now create the real volumes
3326 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
3327 TGeoMedium *medIn = mgr->GetMedium("ITS_INOX$");
3328 TGeoMedium *medFibs = mgr->GetMedium("ITS_SDD OPTICFIB$");//!!TO BE CHECKED!!
3329 TGeoMedium *medLVC = mgr->GetMedium("ITS_SPD_LOWCABLES$");
3331 TGeoVolume *forwTrayABase = new TGeoVolume("ITSsuppSPDSideAForwTrayABase",
3332 forwTrayLowerFace, medAl);
3334 forwTrayABase->SetVisibility(kTRUE);
3335 forwTrayABase->SetLineColor(6); // Purple
3336 forwTrayABase->SetLineWidth(1);
3337 forwTrayABase->SetFillColor(forwTrayABase->GetLineColor());
3338 forwTrayABase->SetFillStyle(4000); // 0% transparent
3340 TGeoVolume *forwTrayASide = new TGeoVolume("ITSsuppSPDSideAForwTrayASide",
3341 forwTraySideFace, medAl);
3343 forwTrayASide->SetVisibility(kTRUE);
3344 forwTrayASide->SetLineColor(6); // Purple
3345 forwTrayASide->SetLineWidth(1);
3346 forwTrayASide->SetFillColor(forwTrayASide->GetLineColor());
3347 forwTrayASide->SetFillStyle(4000); // 0% transparent
3349 TGeoVolume *forwTrayACoverShort = new TGeoVolume("ITSsuppSPDSideAForwTrayASC",
3350 forwTrayShortCover, medAl);
3352 forwTrayACoverShort->SetVisibility(kTRUE);
3353 forwTrayACoverShort->SetLineColor(6); // Purple
3354 forwTrayACoverShort->SetLineWidth(1);
3355 forwTrayACoverShort->SetFillColor(forwTrayACoverShort->GetLineColor());
3356 forwTrayACoverShort->SetFillStyle(4000); // 0% transparent
3358 TGeoVolume *forwTrayACoverLong = new TGeoVolume("ITSsuppSPDSideAForwTrayALC",
3359 forwTrayLongCover, medAl);
3361 forwTrayACoverLong->SetVisibility(kTRUE);
3362 forwTrayACoverLong->SetLineColor(6); // Purple
3363 forwTrayACoverLong->SetLineWidth(1);
3364 forwTrayACoverLong->SetFillColor(forwTrayACoverLong->GetLineColor());
3365 forwTrayACoverLong->SetFillStyle(4000); // 0% transparent
3367 TGeoVolume *forwTrayAWing = new TGeoVolume("ITSsuppSPDSideAForwTrayAWing",
3368 forwTrayWing, medAl);
3370 forwTrayAWing->SetVisibility(kTRUE);
3371 forwTrayAWing->SetLineColor(6); // Purple
3372 forwTrayAWing->SetLineWidth(1);
3373 forwTrayAWing->SetFillColor(forwTrayAWing->GetLineColor());
3374 forwTrayAWing->SetFillStyle(4000); // 0% transparent
3376 TGeoVolume *forwTrayAPlane = new TGeoVolume("ITSsuppSPDSideAForwTrayAPlane",
3377 forwTrayPlane, medAl);
3379 forwTrayAPlane->SetVisibility(kTRUE);
3380 forwTrayAPlane->SetLineColor(6); // Purple
3381 forwTrayAPlane->SetLineWidth(1);
3382 forwTrayAPlane->SetFillColor(forwTrayAPlane->GetLineColor());
3383 forwTrayAPlane->SetFillStyle(4000); // 0% transparent
3385 TGeoVolume *forwTrayAWall = new TGeoVolume("ITSsuppSPDSideAForwTrayAWall",
3386 forwTrayWall, medAl);
3388 forwTrayAWall->SetVisibility(kTRUE);
3389 forwTrayAWall->SetLineColor(6); // Purple
3390 forwTrayAWall->SetLineWidth(1);
3391 forwTrayAWall->SetFillColor(forwTrayAWall->GetLineColor());
3392 forwTrayAWall->SetFillStyle(4000); // 0% transparent
3394 TGeoVolume *extTrayAHorFace = new TGeoVolume("ITSsuppSPDSideAExtTrayHorFace",
3395 extTrayHorFace, medAl);
3397 extTrayAHorFace->SetVisibility(kTRUE);
3398 extTrayAHorFace->SetLineColor(6); // Purple
3399 extTrayAHorFace->SetLineWidth(1);
3400 extTrayAHorFace->SetFillColor(extTrayAHorFace->GetLineColor());
3401 extTrayAHorFace->SetFillStyle(4000); // 0% transparent
3403 TGeoVolume *extTrayAVerFace = new TGeoVolume("ITSsuppSPDSideAExtTrayVerFace",
3404 extTrayVerFace, medAl);
3406 extTrayAVerFace->SetVisibility(kTRUE);
3407 extTrayAVerFace->SetLineColor(6); // Purple
3408 extTrayAVerFace->SetLineWidth(1);
3409 extTrayAVerFace->SetFillColor(extTrayAVerFace->GetLineColor());
3410 extTrayAVerFace->SetFillStyle(4000); // 0% transparent
3412 TGeoVolume *extTrayAWall = new TGeoVolume("ITSsuppSPDSideAExtTrayWall",
3413 extTrayWall, medAl);
3415 extTrayAWall->SetVisibility(kTRUE);
3416 extTrayAWall->SetLineColor(6); // Purple
3417 extTrayAWall->SetLineWidth(1);
3418 extTrayAWall->SetFillColor(extTrayAWall->GetLineColor());
3419 extTrayAWall->SetFillStyle(4000); // 0% transparent
3421 TGeoVolume *forwCoolTube = new TGeoVolume("ITSsuppSPDSideAForwTrayCoolTube",
3422 coolTubeForw, medIn);
3424 forwCoolTube->SetVisibility(kTRUE);
3425 forwCoolTube->SetLineColor(kGray); // as in GeometrySPD
3426 forwCoolTube->SetLineWidth(1);
3427 forwCoolTube->SetFillColor(forwCoolTube->GetLineColor());
3428 forwCoolTube->SetFillStyle(4000); // 0% transparent
3430 TGeoVolume *extCoolTube = new TGeoVolume("ITSsuppSPDSideAExtTrayCoolTube",
3431 coolTubeExt, medIn);
3433 extCoolTube->SetVisibility(kTRUE);
3434 extCoolTube->SetLineColor(kGray); // as in GeometrySPD
3435 extCoolTube->SetLineWidth(1);
3436 extCoolTube->SetFillColor(extCoolTube->GetLineColor());
3437 extCoolTube->SetFillStyle(4000); // 0% transparent
3439 TGeoVolume *forwOptFibs = new TGeoVolume("ITSsuppSPDSideAForwTrayOptFibs",
3440 optFibsForw, medFibs);
3442 forwOptFibs->SetVisibility(kTRUE);
3443 forwOptFibs->SetLineColor(kOrange); // Orange
3444 forwOptFibs->SetLineWidth(1);
3445 forwOptFibs->SetFillColor(forwOptFibs->GetLineColor());
3446 forwOptFibs->SetFillStyle(4000); // 0% transparent
3448 TGeoVolume *extOptFibs = new TGeoVolume("ITSsuppSPDSideAExtTrayOptFibs",
3449 optFibsExt, medFibs);
3451 extOptFibs->SetVisibility(kTRUE);
3452 extOptFibs->SetLineColor(kOrange); // Orange
3453 extOptFibs->SetLineWidth(1);
3454 extOptFibs->SetFillColor(extOptFibs->GetLineColor());
3455 extOptFibs->SetFillStyle(4000); // 0% transparent
3457 TGeoVolume *forwLowCabs = new TGeoVolume("ITSsuppSPDSideAForwTrayLowCabs",
3458 lowCablesForw, medLVC);
3460 forwLowCabs->SetVisibility(kTRUE);
3461 forwLowCabs->SetLineColor(kRed); // Red
3462 forwLowCabs->SetLineWidth(1);
3463 forwLowCabs->SetFillColor(forwLowCabs->GetLineColor());
3464 forwLowCabs->SetFillStyle(4000); // 0% transparent
3466 TGeoVolume *extLowCabs = new TGeoVolume("ITSsuppSPDSideAExtTrayLowCabs",
3467 lowCablesExt, medLVC);
3469 extLowCabs->SetVisibility(kTRUE);
3470 extLowCabs->SetLineColor(kRed); // Red
3471 extLowCabs->SetLineWidth(1);
3472 extLowCabs->SetFillColor(extLowCabs->GetLineColor());
3473 extLowCabs->SetFillStyle(4000); // 0% transparent
3476 // Now build up the trays
3477 yloc = forwTrayLowerFace->GetDY();
3478 zloc = forwTrayLowerFace->GetDZ();
3479 cableTrayAForw->AddNode(forwTrayABase, 1,
3480 new TGeoTranslation(0, yloc, zloc));
3482 xloc = kForwardTrayWide/2;
3483 cableTrayAForw->AddNode(forwTrayASide, 1,
3484 new TGeoCombiTrans( xloc, 0, 0,
3485 new TGeoRotation("",90,-90,-90)));
3486 cableTrayAForw->AddNode(forwTrayASide, 2,
3487 new TGeoCombiTrans(-xloc+kForwardTrayThick, 0, 0,
3488 new TGeoRotation("",90,-90,-90)));
3490 yloc = kForwardTrayFirstHigh - forwTrayShortCover->GetDY();
3491 zloc = forwTrayShortCover->GetDZ();
3492 cableTrayAForw->AddNode(forwTrayACoverShort, 1,
3493 new TGeoTranslation(0, yloc, zloc));
3495 yloc = kForwardTraySecondHigh - forwTrayLongCover->GetDY();
3496 zloc = kForwardTrayFirstLen + forwTrayLongCover->GetDZ();
3497 cableTrayAForw->AddNode(forwTrayACoverLong, 1,
3498 new TGeoTranslation(0, yloc, zloc));
3500 xloc = kForwardTrayWide/2 - kForwardTrayThick - forwTrayWing->GetDX();
3501 yloc = kForwardTrayFirstHigh - kForwardTrayThick - forwTrayWing->GetDY();
3502 zloc = kForwardTrayFirstLen - forwTrayWing->GetDZ();
3503 cableTrayAForw->AddNode(forwTrayAWing, 1,
3504 new TGeoTranslation( xloc, yloc, zloc));
3505 cableTrayAForw->AddNode(forwTrayAWing, 2,
3506 new TGeoTranslation(-xloc, yloc, zloc));
3508 yloc = kForwardTrayThick + kForwardTrayInterSpace - forwTrayPlane->GetDY();
3509 zloc = forwTrayPlane->GetDZ();
3510 cableTrayAForw->AddNode(forwTrayAPlane, 1,
3511 new TGeoTranslation(0, yloc, zloc));
3513 yloc = kForwardTrayThick + forwTrayWall->GetDY();
3514 zloc = forwTrayWall->GetDZ();
3515 cableTrayAForw->AddNode(forwTrayAWall, 1,
3516 new TGeoTranslation(0, yloc, zloc));
3518 yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY()
3519 + coolTubeForw->GetRmax();
3520 zloc = coolTubeForw->GetDz();
3521 cableTrayAForw->AddNode(forwCoolTube, 1,
3522 new TGeoTranslation(0, yloc, zloc));
3524 xloc = optFibsForw->GetDX() + coolTubeForw->GetRmax();
3525 yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY() + optFibsForw->GetDY();
3526 zloc = optFibsForw->GetDZ();
3527 cableTrayAForw->AddNode(forwOptFibs, 1,
3528 new TGeoTranslation(xloc, yloc, zloc));
3530 xloc = lowCablesForw->GetDX() + coolTubeForw->GetRmax();
3531 yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY() +lowCablesForw->GetDY();
3532 zloc = lowCablesForw->GetDZ();
3533 cableTrayAForw->AddNode(forwLowCabs, 1,
3534 new TGeoTranslation(-xloc, yloc, zloc));
3536 // To simplify following placement in MARS, origin is on top
3537 yloc = -kExternalTrayHigh + kExternalTrayThick/2;
3538 zloc = kExternalTrayLen/2;
3539 cableTrayAExt->AddNode(extTrayAHorFace, 1,
3540 new TGeoTranslation( 0, yloc, zloc));
3542 xloc = kExternalTrayWide/2 - kExternalTrayThick/2;
3543 yloc = -kExternalTrayHigh/2;
3544 cableTrayAExt->AddNode(extTrayAVerFace, 1,
3545 new TGeoTranslation( xloc, yloc, zloc));
3546 cableTrayAExt->AddNode(extTrayAVerFace, 2,
3547 new TGeoTranslation(-xloc, yloc, zloc));
3549 yloc = -kExternalTrayThick/2;
3550 cableTrayAExt->AddNode(extTrayAHorFace, 2,
3551 new TGeoTranslation( 0, yloc, zloc));
3553 yloc = -kExternalTrayHigh
3554 + kExternalTrayThick + kForwardTrayInterSpace - kExternalTrayThick/2;
3555 cableTrayAExt->AddNode(extTrayAHorFace, 3,
3556 new TGeoTranslation( 0, yloc, zloc));
3558 yloc = -kExternalTrayHigh + kExternalTrayThick + extTrayWall->GetDY();
3559 cableTrayAExt->AddNode(extTrayAWall, 1,
3560 new TGeoTranslation( 0, yloc, zloc));
3562 yloc = -kExternalTrayHigh + 2*kExternalTrayThick + 2*extTrayWall->GetDY()
3563 + coolTubeExt->GetRmax();
3564 zloc = coolTubeExt->GetDz();
3565 cableTrayAExt->AddNode(extCoolTube, 1,
3566 new TGeoTranslation(0, yloc, zloc));
3568 xloc = kOpticalFibersSect + coolTubeExt->GetRmax();
3569 cableTrayAExt->AddNode(extOptFibs, 1,
3570 new TGeoCombiTrans( xloc, 0, 0,
3571 new TGeoRotation("",90,-90,-90)));
3573 xloc = kLowVoltageCableSect + coolTubeExt->GetRmax();
3574 cableTrayAExt->AddNode(extLowCabs, 1,
3575 new TGeoCombiTrans(-xloc, 0, 0,
3576 new TGeoRotation("",90,-90,-90)));
3579 // Finally put everything in the mother volume
3580 Double_t rExtTray = kTrayAR2Trans + kExternalTrayHigh;
3582 moth->AddNode(cableTrayAForw,1,
3583 new TGeoTranslation( 0, kTrayAR1Trans, kTrayAZTrans));
3584 moth->AddNode(cableTrayAForw,2,
3585 new TGeoCombiTrans( 0,-kTrayAR1Trans, kTrayAZTrans,
3586 new TGeoRotation("",180, 0, 0)));
3588 yloc = kTrayAR1Trans + kExternalTrayHigh;
3589 zloc = kTrayAZTrans + kForwardTrayTotalLen;
3590 moth->AddNode(cableTrayAExt,1,
3591 new TGeoCombiTrans( 0, yloc, zloc,
3592 new TGeoRotation("", 0,-kTrayAZRot, 0)));
3593 moth->AddNode(cableTrayAExt,2,
3594 new TGeoCombiTrans( 0,-yloc, zloc,
3595 new TGeoRotation("",180,-kTrayAZRot, 0)));
3597 alpharot = kTrayAFirstRotAng + kTrayASecondRotAng;
3598 xloc = kTrayAR2Trans*SinD(alpharot);
3599 yloc = kTrayAR2Trans*CosD(alpharot);
3600 moth->AddNode(cableTrayAForw,3,
3601 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3602 new TGeoRotation("",-alpharot,0,0) ) );
3603 xloc = rExtTray*SinD(alpharot);
3604 yloc = rExtTray*CosD(alpharot);
3605 moth->AddNode(cableTrayAExt,3,
3606 new TGeoCombiTrans( xloc, yloc, zloc,
3607 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3610 xloc = kTrayAR2Trans*SinD(alpharot);
3611 yloc = kTrayAR2Trans*CosD(alpharot);
3612 moth->AddNode(cableTrayAForw,4,
3613 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3614 new TGeoRotation("",-alpharot,0,0) ) );
3615 xloc = rExtTray*SinD(alpharot);
3616 yloc = rExtTray*CosD(alpharot);
3617 moth->AddNode(cableTrayAExt,4,
3618 new TGeoCombiTrans( xloc, yloc, zloc,
3619 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3621 alpharot = - kTrayAFirstRotAng - kTrayASecondRotAng;
3622 xloc = kTrayAR2Trans*SinD(alpharot);
3623 yloc = kTrayAR2Trans*CosD(alpharot);
3624 moth->AddNode(cableTrayAForw,5,
3625 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3626 new TGeoRotation("",-alpharot,0,0) ) );
3627 xloc = rExtTray*SinD(alpharot);
3628 yloc = rExtTray*CosD(alpharot);
3629 moth->AddNode(cableTrayAExt,5,
3630 new TGeoCombiTrans( xloc, yloc, zloc,
3631 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3634 xloc = kTrayAR2Trans*SinD(alpharot);
3635 yloc = kTrayAR2Trans*CosD(alpharot);
3636 moth->AddNode(cableTrayAForw,6,
3637 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3638 new TGeoRotation("",-alpharot,0,0) ) );
3639 xloc = rExtTray*SinD(alpharot);
3640 yloc = rExtTray*CosD(alpharot);
3641 moth->AddNode(cableTrayAExt,6,
3642 new TGeoCombiTrans( xloc, yloc, zloc,
3643 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3645 alpharot = kTrayAFirstRotAng + 3*kTrayASecondRotAng;
3646 xloc = kTrayAR2Trans*SinD(alpharot);
3647 yloc = kTrayAR2Trans*CosD(alpharot);
3648 moth->AddNode(cableTrayAForw,7,
3649 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3650 new TGeoRotation("",-alpharot,0,0) ) );
3651 xloc = rExtTray*SinD(alpharot);
3652 yloc = rExtTray*CosD(alpharot);
3653 moth->AddNode(cableTrayAExt,7,
3654 new TGeoCombiTrans( xloc, yloc, zloc,
3655 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3658 xloc = kTrayAR2Trans*SinD(alpharot);
3659 yloc = kTrayAR2Trans*CosD(alpharot);
3660 moth->AddNode(cableTrayAForw,8,
3661 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3662 new TGeoRotation("",-alpharot,0,0) ) );
3663 xloc = rExtTray*SinD(alpharot);
3664 yloc = rExtTray*CosD(alpharot);
3665 moth->AddNode(cableTrayAExt,8,
3666 new TGeoCombiTrans( xloc, yloc, zloc,
3667 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3669 alpharot = - kTrayAFirstRotAng - 3*kTrayASecondRotAng;
3670 xloc = kTrayAR2Trans*SinD(alpharot);
3671 yloc = kTrayAR2Trans*CosD(alpharot);
3672 moth->AddNode(cableTrayAForw,9,
3673 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3674 new TGeoRotation("",-alpharot,0,0) ) );
3675 xloc = rExtTray*SinD(alpharot);
3676 yloc = rExtTray*CosD(alpharot);
3677 moth->AddNode(cableTrayAExt,9,
3678 new TGeoCombiTrans( xloc, yloc, zloc,
3679 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3682 xloc = kTrayAR2Trans*SinD(alpharot);
3683 yloc = kTrayAR2Trans*CosD(alpharot);
3684 moth->AddNode(cableTrayAForw,10,
3685 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3686 new TGeoRotation("",-alpharot,0,0) ) );
3687 xloc = rExtTray*SinD(alpharot);
3688 yloc = rExtTray*CosD(alpharot);
3689 moth->AddNode(cableTrayAExt,10,
3690 new TGeoCombiTrans( xloc, yloc, zloc,
3691 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3697 //______________________________________________________________________
3698 void AliITSv11GeometrySupport::SPDCableTraysSideC(TGeoVolume *moth,
3701 // Creates the SPD cable trays which are outside the ITS support cones
3702 // but still inside the TPC on Side C
3703 // (part of this code is taken or anyway inspired to ServicesCableSupport
3704 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
3707 // moth : the TGeoVolume owing the volume structure
3708 // mgr : the GeoManager (default gGeoManager)
3713 // Created: ??? Bjorn S. Nilsen
3714 // Updated: 22 Apr 2010 Mario Sitta
3716 // Technical data are taken from AutoCAD drawings and other (oral)
3717 // information given by D.Elia
3720 // Dimensions and positions of the C-Side Cable Tray elements
3721 const Int_t kNumTraysSideC = 10;
3723 const Double_t kTrayCHalfWide = 6.350 *fgkcm;
3724 const Double_t kTrayCLength1 = 172.800 *fgkcm;
3725 const Double_t kTrayCLength2 = 189.300 *fgkcm;
3726 const Double_t kTrayCFirstLen = 435.000 *fgkmm;
3727 const Double_t kTrayCFirstHigh = 83.000 *fgkmm;//!!!TO BE CHECKED!!!
3728 const Double_t kTrayCSecondHigh = 52.700 *fgkmm;//!!!TO BE CHECKED!!!
3729 const Double_t kTrayCThick = 0.200 *fgkcm;
3730 const Double_t kTrayCInterSpace = 18.000 *fgkmm;//!!!TO BE CHECKED!!!
3731 const Double_t kTrayCFoldAngle = 5.000 *fgkDegree;
3733 const Double_t kCoolingTubeRmin = 5.000 *fgkmm;
3734 const Double_t kCoolingTubeRmax = 6.000 *fgkmm;
3735 const Double_t kOpticalFibersSect = 8.696 *fgkmm;//!!!ESTIMATED!!!
3736 const Double_t kLowVoltageCableSect = 3.412 *fgkmm;//!!!ESTIMATED!!!
3738 // Overall position and rotation of the C-Side Cable Trays
3739 const Double_t kTraySideCRPos = 45.300 *fgkcm;
3740 const Double_t kTraySideCZPos = -102.400 *fgkcm;
3741 const Double_t kTraySideCAlphaRot[kNumTraysSideC/2] =
3742 { 0.0, 41.0, -41.0, 76.0, -76.0};
3743 // From position of the other trays
3747 Double_t xprof[8], yprof[8];
3748 Double_t xloc, yloc, zloc, delta, alpharot;
3751 // The single C-Side Cable tray as an assembly
3752 TGeoVolumeAssembly *cableTrayC = new TGeoVolumeAssembly("ITSsupportSPDTrayC");
3754 // First create all needed shapes
3756 // The Cable Tray lower face: a Xtru
3757 TGeoXtru *sideCHorFace = new TGeoXtru(2);
3761 xprof[1] = kTrayCLength1;
3763 xprof[2] = xprof[1] + kTrayCLength2*CosD(kTrayCFoldAngle);
3764 yprof[2] = yprof[1] + kTrayCLength2*SinD(kTrayCFoldAngle);
3765 xprof[3] = xprof[2] - kTrayCThick*SinD(kTrayCFoldAngle);
3766 yprof[3] = yprof[2] + kTrayCThick*CosD(kTrayCFoldAngle);
3767 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
3768 kTrayCThick , xprof[4], yprof[4]);
3770 yprof[5] = kTrayCThick;
3772 delta = kTrayCHalfWide - kTrayCThick;
3774 sideCHorFace->DefinePolygon(6, xprof, yprof);
3775 sideCHorFace->DefineSection(0,-delta);
3776 sideCHorFace->DefineSection(1, delta);
3778 // The Cable Tray middle face: a Xtru
3779 // (somehow duplicate of HorFace, but in this way avoid an overlap with Wall)
3780 TGeoXtru *sideCMidFace = new TGeoXtru(2);
3783 yprof[0] = kTrayCInterSpace + kTrayCThick;
3784 xprof[1] = kTrayCLength1;
3785 yprof[1] = yprof[0];
3786 xprof[2] = xprof[1] + kTrayCLength2*CosD(kTrayCFoldAngle);
3787 yprof[2] = yprof[1] + kTrayCLength2*SinD(kTrayCFoldAngle);
3788 xprof[3] = xprof[2] - kTrayCThick*SinD(kTrayCFoldAngle);
3789 yprof[3] = yprof[2] + kTrayCThick*CosD(kTrayCFoldAngle);
3790 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
3791 kTrayCThick , xprof[4], yprof[4]);
3793 yprof[5] = yprof[0] + kTrayCThick;
3795 delta = kTrayCHalfWide - kTrayCThick;
3797 sideCMidFace->DefinePolygon(6, xprof, yprof);
3798 sideCMidFace->DefineSection(0,-delta);
3799 sideCMidFace->DefineSection(1, delta);
3801 // The Cable Tray lower face: a Xtru
3802 TGeoXtru *sideCSideFace = new TGeoXtru(2);
3806 xprof[1] = kTrayCLength1;
3808 xprof[2] = xprof[1] + kTrayCLength2*CosD(kTrayCFoldAngle);
3809 yprof[2] = yprof[1] + kTrayCLength2*SinD(kTrayCFoldAngle);
3810 xprof[3] = xprof[2] - kTrayCSecondHigh*SinD(kTrayCFoldAngle);
3811 yprof[3] = yprof[2] + kTrayCSecondHigh*CosD(kTrayCFoldAngle);
3812 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
3813 kTrayCSecondHigh , xprof[4], yprof[4]);
3814 xprof[5] = kTrayCFirstLen;
3815 yprof[5] = kTrayCSecondHigh;
3816 xprof[6] = xprof[5];
3817 yprof[6] = kTrayCFirstHigh;
3818 xprof[7] = xprof[0];
3819 yprof[7] = yprof[6];
3821 sideCSideFace->DefinePolygon(8, xprof, yprof);
3822 sideCSideFace->DefineSection(0, 0);
3823 sideCSideFace->DefineSection(1, kTrayCThick);
3825 // The short cover: a BBox
3826 TGeoBBox *sideCShortCover = new TGeoBBox(kTrayCFirstLen/2,
3828 kTrayCHalfWide-kTrayCThick);
3830 // The long cover: a Xtru
3831 TGeoXtru *sideCLongCover = new TGeoXtru(2);
3833 xprof[5] = sideCSideFace->GetX(5);
3834 yprof[5] = sideCSideFace->GetY(5);
3835 xprof[4] = sideCSideFace->GetX(4);
3836 yprof[4] = sideCSideFace->GetY(4);
3837 xprof[3] = sideCSideFace->GetX(3);
3838 yprof[3] = sideCSideFace->GetY(3);
3839 xprof[2] = xprof[3] + kTrayCThick*SinD(kTrayCFoldAngle);
3840 yprof[2] = yprof[3] - kTrayCThick*CosD(kTrayCFoldAngle);
3841 InsidePoint(xprof[5], yprof[5], xprof[4], yprof[4], xprof[3], yprof[3],
3842 -kTrayCThick , xprof[1], yprof[1]);
3843 xprof[0] = xprof[5];
3844 yprof[0] = yprof[5] - kTrayCThick;
3846 delta = kTrayCHalfWide - kTrayCThick;
3848 sideCLongCover->DefinePolygon(6, xprof, yprof);
3849 sideCLongCover->DefineSection(0,-delta);
3850 sideCLongCover->DefineSection(1, delta);
3852 // The internal wall: a Xtru
3853 TGeoXtru *intWall = new TGeoXtru(2);
3855 xprof[0] = sideCHorFace->GetX(5);
3856 yprof[0] = sideCHorFace->GetY(5);
3857 xprof[1] = sideCHorFace->GetX(4);
3858 yprof[1] = sideCHorFace->GetY(4);
3859 xprof[2] = sideCHorFace->GetX(3);
3860 yprof[2] = sideCHorFace->GetY(3);
3861 xprof[3] = sideCMidFace->GetX(2);
3862 yprof[3] = sideCMidFace->GetY(2);
3863 xprof[4] = sideCMidFace->GetX(1);
3864 yprof[4] = sideCMidFace->GetY(1);
3865 xprof[5] = sideCMidFace->GetX(0);
3866 yprof[5] = sideCMidFace->GetY(0);
3868 intWall->DefinePolygon(6, xprof, yprof);
3869 intWall->DefineSection(0,-kTrayCThick/2);
3870 intWall->DefineSection(1, kTrayCThick/2);
3872 // The horizontal part of the cooling tube inside the tray: a Tube
3873 delta = sideCMidFace->GetX(4) - sideCMidFace->GetX(5);
3874 TGeoTube *horTube = new TGeoTube(kCoolingTubeRmin, kCoolingTubeRmax,
3877 // The inclined part of the cooling tube inside the tray: a Ctub
3878 Double_t x3, y3, x4, y4;
3879 x3 = sideCMidFace->GetX(3);
3880 y3 = sideCMidFace->GetY(3);
3881 x4 = sideCMidFace->GetX(4);
3882 y4 = sideCMidFace->GetY(4);
3883 delta = TMath::Sqrt( (x4 - x3 + kCoolingTubeRmax*SinD(kTrayCFoldAngle))*
3884 (x4 - x3 + kCoolingTubeRmax*SinD(kTrayCFoldAngle)) +
3885 (y4 + kCoolingTubeRmax - y3 - kCoolingTubeRmax*SinD(kTrayCFoldAngle))*
3886 (y4 + kCoolingTubeRmax - y3 - kCoolingTubeRmax*SinD(kTrayCFoldAngle)) );
3888 TGeoCtub *incTube = new TGeoCtub(kCoolingTubeRmin, kCoolingTubeRmax,
3890 0, SinD(kTrayCFoldAngle),-CosD(kTrayCFoldAngle),
3893 // The optical fibers inside the tray: a Xtru
3894 TGeoXtru *optFibs = new TGeoXtru(2);
3896 xprof[0] = sideCMidFace->GetX(5);
3898 yprof[0] = sideCMidFace->GetY(5);
3899 xprof[1] = sideCMidFace->GetX(4);
3900 yprof[1] = sideCMidFace->GetY(4);
3901 xprof[2] = sideCMidFace->GetX(3);
3902 yprof[2] = sideCMidFace->GetY(3);
3903 xprof[3] = xprof[2] - kOpticalFibersSect*SinD(kTrayCFoldAngle);
3904 yprof[3] = yprof[2] + kOpticalFibersSect*CosD(kTrayCFoldAngle);
3905 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
3906 kOpticalFibersSect , xprof[4], yprof[4]);
3908 yprof[5] = yprof[0] + kOpticalFibersSect;
3910 optFibs->DefinePolygon(6, xprof, yprof);
3911 optFibs->DefineSection(0, 0);
3912 optFibs->DefineSection(1, kOpticalFibersSect);
3914 // The low voltage cables inside the tray: a Xtru
3915 TGeoXtru *lowCables = new TGeoXtru(2);
3917 xprof[0] = sideCMidFace->GetX(5);
3918 yprof[0] = sideCMidFace->GetY(5);
3919 xprof[1] = sideCMidFace->GetX(4);
3920 yprof[1] = sideCMidFace->GetY(4);
3921 xprof[2] = sideCMidFace->GetX(3);
3922 yprof[2] = sideCMidFace->GetY(3);
3923 xprof[3] = xprof[2] - kLowVoltageCableSect*SinD(kTrayCFoldAngle);
3924 yprof[3] = yprof[2] + kLowVoltageCableSect*CosD(kTrayCFoldAngle);
3925 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
3926 kLowVoltageCableSect , xprof[4], yprof[4]);
3928 yprof[5] = yprof[0] + kLowVoltageCableSect;
3930 lowCables->DefinePolygon(6, xprof, yprof);
3931 lowCables->DefineSection(0, 0);
3932 lowCables->DefineSection(1, kLowVoltageCableSect);
3935 // We have all shapes: now create the real volumes
3936 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
3937 TGeoMedium *medIn = mgr->GetMedium("ITS_INOX$");
3938 TGeoMedium *medFibs = mgr->GetMedium("ITS_SDD OPTICFIB$");//!!TO BE CHECKED!!
3939 TGeoMedium *medLVC = mgr->GetMedium("ITS_SPD_LOWCABLES$");
3941 TGeoVolume *traySideCHorFace = new TGeoVolume("ITSsuppSPDTraySideCHor",
3942 sideCHorFace, medAl);
3944 traySideCHorFace->SetVisibility(kTRUE);
3945 traySideCHorFace->SetLineColor(6); // Purple
3946 traySideCHorFace->SetLineWidth(1);
3947 traySideCHorFace->SetFillColor(traySideCHorFace->GetLineColor());
3948 traySideCHorFace->SetFillStyle(4000); // 0% transparent
3950 TGeoVolume *traySideCMidFace = new TGeoVolume("ITSsuppSPDTraySideCMid",
3951 sideCMidFace, medAl);
3953 traySideCMidFace->SetVisibility(kTRUE);
3954 traySideCMidFace->SetLineColor(6); // Purple
3955 traySideCMidFace->SetLineWidth(1);
3956 traySideCMidFace->SetFillColor(traySideCMidFace->GetLineColor());
3957 traySideCMidFace->SetFillStyle(4000); // 0% transparent
3959 TGeoVolume *traySideCSideFace = new TGeoVolume("ITSsuppSPDTraySideCSide",
3960 sideCSideFace, medAl);
3962 traySideCSideFace->SetVisibility(kTRUE);
3963 traySideCSideFace->SetLineColor(6); // Purple
3964 traySideCSideFace->SetLineWidth(1);
3965 traySideCSideFace->SetFillColor(traySideCSideFace->GetLineColor());
3966 traySideCSideFace->SetFillStyle(4000); // 0% transparent
3968 TGeoVolume *traySideCShortCover = new TGeoVolume("ITSsuppSPDTraySideCShCov",
3969 sideCShortCover, medAl);
3971 traySideCShortCover->SetVisibility(kTRUE);
3972 traySideCShortCover->SetLineColor(6); // Purple
3973 traySideCShortCover->SetLineWidth(1);
3974 traySideCShortCover->SetFillColor(traySideCShortCover->GetLineColor());
3975 traySideCShortCover->SetFillStyle(4000); // 0% transparent
3977 TGeoVolume *traySideCLongCover = new TGeoVolume("ITSsuppSPDTraySideCLnCov",
3978 sideCLongCover, medAl);
3980 traySideCLongCover->SetVisibility(kTRUE);
3981 traySideCLongCover->SetLineColor(6); // Purple
3982 traySideCLongCover->SetLineWidth(1);
3983 traySideCLongCover->SetFillColor(traySideCLongCover->GetLineColor());
3984 traySideCLongCover->SetFillStyle(4000); // 0% transparent
3986 TGeoVolume *traySideCIntWall = new TGeoVolume("ITSsuppSPDTraySideCWall",
3989 traySideCIntWall->SetVisibility(kTRUE);
3990 traySideCIntWall->SetLineColor(6); // Purple
3991 traySideCIntWall->SetLineWidth(1);
3992 traySideCIntWall->SetFillColor(traySideCIntWall->GetLineColor());
3993 traySideCIntWall->SetFillStyle(4000); // 0% transparent
3995 TGeoVolume *traySideCHorTube = new TGeoVolume("ITSsuppSPDTraySideCHorTube",
3998 traySideCHorTube->SetVisibility(kTRUE);
3999 traySideCHorTube->SetLineColor(kGray); // as in GeometrySPD
4000 traySideCHorTube->SetLineWidth(1);
4001 traySideCHorTube->SetFillColor(traySideCHorTube->GetLineColor());
4002 traySideCHorTube->SetFillStyle(4000); // 0% transparent
4004 TGeoVolume *traySideCIncTube = new TGeoVolume("ITSsuppSPDTraySideCIncTube",
4007 traySideCIncTube->SetVisibility(kTRUE);
4008 traySideCIncTube->SetLineColor(kGray); // as in GeometrySPD
4009 traySideCIncTube->SetLineWidth(1);
4010 traySideCIncTube->SetFillColor(traySideCIncTube->GetLineColor());
4011 traySideCIncTube->SetFillStyle(4000); // 0% transparent
4013 TGeoVolume *traySideCOptFibs = new TGeoVolume("ITSsuppSPDTraySideCOptFibs",
4016 traySideCOptFibs->SetVisibility(kTRUE);
4017 traySideCOptFibs->SetLineColor(kOrange); // Orange
4018 traySideCOptFibs->SetLineWidth(1);
4019 traySideCOptFibs->SetFillColor(traySideCOptFibs->GetLineColor());
4020 traySideCOptFibs->SetFillStyle(4000); // 0% transparent
4022 TGeoVolume *traySideCLowCabs = new TGeoVolume("ITSsuppSPDTraySideCLowCabs",
4025 traySideCLowCabs->SetVisibility(kTRUE);
4026 traySideCLowCabs->SetLineColor(kRed); // Red
4027 traySideCLowCabs->SetLineWidth(1);
4028 traySideCLowCabs->SetFillColor(traySideCLowCabs->GetLineColor());
4029 traySideCLowCabs->SetFillStyle(4000); // 0% transparent
4032 // Now build up the trays
4033 cableTrayC->AddNode(traySideCHorFace,1,0);
4035 cableTrayC->AddNode(traySideCMidFace,1,0);
4037 zloc = kTrayCHalfWide - kTrayCThick;
4038 cableTrayC->AddNode(traySideCSideFace, 1,
4039 new TGeoTranslation( 0, 0, zloc));
4040 zloc = -kTrayCHalfWide;
4041 cableTrayC->AddNode(traySideCSideFace, 2,
4042 new TGeoTranslation( 0, 0, zloc));
4044 xloc = sideCShortCover->GetDX();
4045 yloc = kTrayCFirstHigh - sideCShortCover->GetDY();
4046 cableTrayC->AddNode(traySideCShortCover, 1,
4047 new TGeoTranslation( xloc, yloc, 0));
4049 cableTrayC->AddNode(traySideCLongCover,1,0);
4051 cableTrayC->AddNode(traySideCIntWall,1,0);
4053 xloc = horTube->GetDz();
4054 yloc = sideCMidFace->GetY(5) + horTube->GetRmax();
4055 cableTrayC->AddNode(traySideCHorTube, 1,
4056 new TGeoCombiTrans( xloc, yloc, 0,
4057 new TGeoRotation("",-90.,-90.,90.)));
4059 xloc = sideCMidFace->GetX(4) + (incTube->GetDz())*CosD(kTrayCFoldAngle);
4060 yloc = sideCMidFace->GetY(4) + incTube->GetRmax() +
4061 (incTube->GetDz())*SinD(kTrayCFoldAngle)+0.005;//Avoid small ovrlp
4062 cableTrayC->AddNode(traySideCIncTube, 1,
4063 new TGeoCombiTrans( xloc, yloc, 0,
4064 new TGeoRotation("",-90.+kTrayCFoldAngle,-90.,90.)));
4066 zloc = horTube->GetRmax();
4067 cableTrayC->AddNode(traySideCOptFibs, 1,
4068 new TGeoTranslation( 0, 0, zloc));
4070 zloc = kLowVoltageCableSect + horTube->GetRmax();
4071 cableTrayC->AddNode(traySideCLowCabs, 1,
4072 new TGeoTranslation( 0, 0,-zloc));
4075 // Finally put everything in the mother volume
4076 for (Int_t jt = 0; jt < kNumTraysSideC/2; jt++) {
4077 alpharot = kTraySideCAlphaRot[jt];
4079 xloc = kTraySideCRPos*SinD(alpharot);
4080 yloc = kTraySideCRPos*CosD(alpharot);
4081 moth->AddNode(cableTrayC,2*jt+1,
4082 new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos,
4083 new TGeoRotation("",-90.+alpharot,-90.,90.+kTrayCFoldAngle)));
4085 xloc = kTraySideCRPos*SinD(alpharot);
4086 yloc = kTraySideCRPos*CosD(alpharot);
4087 moth->AddNode(cableTrayC,2*jt+2,
4088 new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos,
4089 new TGeoRotation("",-90.+alpharot,-90.,90.+kTrayCFoldAngle)));
4096 //______________________________________________________________________
4097 void AliITSv11GeometrySupport::SDDCableTraysSideA(TGeoVolume *moth,
4100 // Creates the SDD cable trays which are outside the ITS support cones
4101 // but still inside the TPC on Side A
4102 // (part of this code is taken or anyway inspired to ServicesCableSupport
4103 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
4106 // moth : the TGeoVolume owing the volume structure
4107 // mgr : the GeoManager (default gGeoManager)
4110 // Created: ??? Bjorn S. Nilsen
4111 // Updated: 5 Jan 2010 Mario Sitta
4112 // Updated: 26 Feb 2010 Mario Sitta
4114 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
4115 // drawings and other (oral) information given by F.Tosello
4118 // Overall position and rotation of the A-Side Cable Trays
4119 // (parts of 0872/G/D)
4120 const Double_t kTrayARTrans = 408.35 *fgkmm;
4121 const Double_t kTrayAZTrans = 1011.00 *fgkmm;
4122 const Double_t kTrayAZToSupportRing = 435.00 *fgkmm;
4123 const Double_t kExternTrayZTrans = 853.00 *fgkmm;
4124 const Double_t kExternCoverYTrans = 2.00 *fgkmm;
4125 const Double_t kTrayAZRot = (180-169.5);// Degrees
4126 const Double_t kTrayAFirstRotAng = 22.00; // Degrees
4127 const Double_t kTrayASecondRotAng = 15.00; // Degrees
4129 const Double_t kForwardTrayTailHeight = 100.00 *fgkmm; // Computed
4130 const Double_t kForwardTrayTotalHeight = 170.00 *fgkmm; // Computed
4131 const Double_t kForwardTrayUpperLength = 405.00 *fgkmm; // Computed
4132 const Double_t kForwardCoverLength = 380.00 *fgkmm;
4133 const Double_t kForwardCoverWide = 133.00 *fgkmm;
4134 const Double_t kForwardCoverHeight = 10.00 *fgkmm;
4135 const Double_t kForwardCoverThick = 1.00 *fgkmm;
4137 const Double_t kExternTrayTotalLen = 1200.00 *fgkmm;
4138 const Double_t kExternTrayTotalHeight = 52.00 *fgkmm;
4139 const Double_t kExternCoverLen = kExternTrayTotalLen;
4140 const Double_t kExternCoverThick = 5.00 *fgkmm;
4141 const Double_t kExternCoverSideThick = 3.00 *fgkmm;
4143 const Int_t kForwardTrayNpoints = 8;
4147 Double_t xprof[kForwardTrayNpoints], yprof[kForwardTrayNpoints];
4148 Double_t xloc, yloc, zloc, alpharot;
4151 // The whole tray as an assembly
4152 TGeoVolumeAssembly *cableTrayA = new TGeoVolumeAssembly("ITSsupportSDDTrayA");
4155 // First create all needed shapes
4157 // The forward tray is very complex and deserves a dedicated method
4158 TGeoVolumeAssembly *forwardTray = CreateSDDForwardTraySideA(mgr);
4160 // The forward cover: a Xtru
4161 TGeoXtru *forwardCover = new TGeoXtru(2);
4162 forwardCover->SetName("ITSsuppSDDForwCover");
4164 xprof[0] = kForwardCoverWide/2;
4165 yprof[0] = kForwardCoverHeight;
4166 xprof[1] = xprof[0];
4168 xprof[2] = xprof[1] - kForwardCoverThick;
4169 yprof[2] = yprof[1];
4170 xprof[3] = xprof[2];
4171 yprof[3] = yprof[0] - kForwardCoverThick;
4173 // We did the right side, now reflex on the left side
4174 for (Int_t jp = 0; jp < 4; jp++) {
4175 xprof[4+jp] = -xprof[3-jp];
4176 yprof[4+jp] = yprof[3-jp];
4179 forwardCover->DefinePolygon(8, xprof, yprof);
4180 forwardCover->DefineSection(0, 0);
4181 forwardCover->DefineSection(1, kForwardCoverLength);
4183 // The external tray (as 0872/G/D/03): a Xtru
4184 TGeoXtru *externalTray = CreateSDDSSDTraysSideA(kExternTrayTotalLen,
4185 kExternTrayTotalHeight);
4187 // The external covers: a Composite Shape
4188 TGeoCompositeShape *externCover = CreateTrayAExternalCover(kExternCoverLen);
4191 // We have all shapes: now create the real volumes
4192 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
4193 TGeoMedium *medAntic = mgr->GetMedium("ITS_ANTICORODAL$");
4195 TGeoVolume *forwardTrayCover = new TGeoVolume("ITSsuppSDDSideAForwTrayCover",
4196 forwardCover, medAl);
4198 forwardTrayCover->SetVisibility(kTRUE);
4199 forwardTrayCover->SetLineColor(kMagenta+1); // Purple
4200 forwardTrayCover->SetLineWidth(1);
4201 forwardTrayCover->SetFillColor(forwardTrayCover->GetLineColor());
4202 forwardTrayCover->SetFillStyle(4000); // 0% transparent
4204 TGeoVolume *externalTraySDD = new TGeoVolume("ITSsuppSDDSideAExternalTray",
4205 externalTray, medAl);
4207 externalTraySDD->SetVisibility(kTRUE);
4208 externalTraySDD->SetLineColor(6); // Purple
4209 externalTraySDD->SetLineWidth(1);
4210 externalTraySDD->SetFillColor(externalTraySDD->GetLineColor());
4211 externalTraySDD->SetFillStyle(4000); // 0% transparent
4213 TGeoVolume *externTrayCover = new TGeoVolume("ITSsuppSDDSideAExtTrayCover",
4214 externCover, medAntic);
4216 externTrayCover->SetVisibility(kTRUE);
4217 externTrayCover->SetLineColor(kMagenta+1); // Purple
4218 externTrayCover->SetLineWidth(1);
4219 externTrayCover->SetFillColor(externTrayCover->GetLineColor());
4220 externTrayCover->SetFillStyle(4000); // 0% transparent
4223 // Now build up the tray
4224 yloc = kForwardTrayTotalHeight - forwardCover->GetY(3) +
4225 kExternTrayTotalHeight +
4226 kExternCoverSideThick - kForwardTrayTailHeight;
4227 zloc = kTrayAZToSupportRing - kForwardCoverLength;
4228 cableTrayA->AddNode(forwardTrayCover, 1,
4229 new TGeoTranslation( 0, yloc, zloc) );
4231 Double_t totalhi = kExternTrayTotalHeight + kExternCoverThick
4232 - kExternCoverYTrans;
4234 yloc = totalhi*(1 - CosD(kTrayAZRot));
4235 zloc = kExternTrayZTrans + totalhi*SinD(kTrayAZRot);
4236 cableTrayA->AddNode(externalTraySDD, 1,
4237 new TGeoCombiTrans( 0, yloc, zloc,
4238 new TGeoRotation("", 0,-kTrayAZRot, 0) ) );
4240 yloc = kExternTrayTotalHeight - kExternCoverYTrans;
4241 zloc = kExternTrayZTrans - yloc*SinD(kTrayAZRot);
4242 yloc *= CosD(kTrayAZRot);
4243 zloc += totalhi*SinD(kTrayAZRot);
4244 yloc += totalhi*(1 - CosD(kTrayAZRot));
4245 cableTrayA->AddNode(externTrayCover,1,
4246 new TGeoCombiTrans( 0, yloc, zloc,
4247 new TGeoRotation("", 0,-kTrayAZRot, 0) ) );
4250 // Finally put everything in the mother volume
4251 alpharot = -kTrayAFirstRotAng;
4252 xloc = kTrayARTrans*SinD(alpharot);
4253 yloc = kTrayARTrans*CosD(alpharot);
4254 zloc = kTrayAZTrans;
4255 moth->AddNode(cableTrayA,1,
4256 new TGeoCombiTrans( xloc, yloc, zloc,
4257 new TGeoRotation("",-alpharot,0,0) ) );
4260 xloc = kTrayARTrans*SinD(alpharot);
4261 yloc = kTrayARTrans*CosD(alpharot);
4262 moth->AddNode(cableTrayA,2,
4263 new TGeoCombiTrans( xloc, yloc, zloc,
4264 new TGeoRotation("",-alpharot,0,0) ) );
4266 alpharot = kTrayAFirstRotAng + 2*kTrayASecondRotAng;
4267 xloc = kTrayARTrans*SinD(alpharot);
4268 yloc = kTrayARTrans*CosD(alpharot);
4269 moth->AddNode(cableTrayA,3,
4270 new TGeoCombiTrans( xloc, yloc, zloc,
4271 new TGeoRotation("",-alpharot,0,0) ) );
4274 xloc = kTrayARTrans*SinD(alpharot);
4275 yloc = kTrayARTrans*CosD(alpharot);
4276 moth->AddNode(cableTrayA,4,
4277 new TGeoCombiTrans( xloc, yloc, zloc,
4278 new TGeoRotation("",-alpharot,0,0) ) );
4280 // To avoid putting an assembly inside another assembly,
4281 // the forwardTray is put directly in the mother volume
4282 Double_t rforw = kTrayARTrans + kExternTrayTotalHeight +
4283 kExternCoverSideThick -
4284 kForwardTrayTailHeight;
4286 alpharot = -kTrayAFirstRotAng;
4287 xloc = rforw*SinD(alpharot);
4288 yloc = rforw*CosD(alpharot);
4289 zloc = kTrayAZTrans + kTrayAZToSupportRing - kForwardTrayUpperLength;
4291 moth->AddNode(forwardTray,1,
4292 new TGeoCombiTrans( xloc, yloc, zloc,
4293 new TGeoRotation("",-alpharot,0,0) ) );
4296 xloc = rforw*SinD(alpharot);
4297 yloc = rforw*CosD(alpharot);
4298 moth->AddNode(forwardTray,2,
4299 new TGeoCombiTrans( xloc, yloc, zloc,
4300 new TGeoRotation("",-alpharot,0,0) ) );
4302 alpharot = kTrayAFirstRotAng + 2*kTrayASecondRotAng;
4303 xloc = rforw*SinD(alpharot);
4304 yloc = rforw*CosD(alpharot);
4305 moth->AddNode(forwardTray,3,
4306 new TGeoCombiTrans( xloc, yloc, zloc,
4307 new TGeoRotation("",-alpharot,0,0) ) );
4310 xloc = rforw*SinD(alpharot);
4311 yloc = rforw*CosD(alpharot);
4312 moth->AddNode(forwardTray,4,
4313 new TGeoCombiTrans( xloc, yloc, zloc,
4314 new TGeoRotation("",-alpharot,0,0) ) );
4320 //______________________________________________________________________
4321 void AliITSv11GeometrySupport::SDDCableTraysSideC(TGeoVolume *moth,
4324 // Creates the SDD cable trays which are outside the ITS support cones
4325 // but still inside the TPC on Side C
4326 // (part of this code is taken or anyway inspired to ServicesCableSupport
4327 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
4330 // moth : the TGeoVolume owing the volume structure
4331 // mgr : the GeoManager (default gGeoManager)
4334 // Created: ??? Bjorn S. Nilsen
4335 // Updated: 17 Apr 2010 Mario Sitta
4337 // Technical data are taken from AutoCAD drawings and other (oral)
4338 // information given by F.Tosello
4341 // Dimensions and positions of the C-Side Cable Tray elements
4342 const Int_t kNumTraySideC = 4;
4344 const Double_t kSideCFoldAngle = 5.00 *fgkDegree;
4346 // Overall position and rotation of the C-Side Cable Trays
4347 const Double_t kTraySideCRPos = 45.30 *fgkcm;
4348 const Double_t kTraySideCZPos = -102.40 *fgkcm;
4349 const Double_t kTraySideCAlphaRot[kNumTraySideC] = { -23.0, 59.0,
4350 /* from SSD tray position */ 180.-23.0, 180.+59.0};
4354 // Double_t xprof[12], yprof[12];
4355 Double_t xloc, yloc, alpharot, alphafold;
4358 // The assembly holding the metallic structure
4359 TGeoVolumeAssembly *trayStructure =
4360 CreateSDDSSDTraysSideC("ITSsupportSDDTrayC");
4363 // We have all shapes: now create the real volumes
4364 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
4365 if (0==1) medAl->Print();
4367 // Finally put everything in the mother volume
4368 alphafold = kSideCFoldAngle;
4370 for (Int_t jt = 0; jt < kNumTraySideC; jt++) {
4371 alpharot = kTraySideCAlphaRot[jt];
4372 xloc = kTraySideCRPos*SinD(alpharot);
4373 yloc = kTraySideCRPos*CosD(alpharot);
4374 moth->AddNode(trayStructure,jt+1,
4375 new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos,
4376 new TGeoRotation("",-90.+alpharot,-90.,90.+alphafold)));
4384 //______________________________________________________________________
4385 void AliITSv11GeometrySupport::SSDCableTraysSideA(TGeoVolume *moth,
4388 // Creates the SSD cable trays which are outside the ITS support cones
4389 // but still inside the TPC on Side A
4390 // (part of this code is taken or anyway inspired to ServicesCableSupport
4391 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
4394 // moth : the TGeoVolume owing the volume structure
4395 // mgr : the GeoManager (default gGeoManager)
4398 // Created: ??? Bjorn S. Nilsen
4399 // Updated: 30 Dec 2009 Mario Sitta
4401 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
4402 // drawings and other (oral) information given by F.Tosello and
4403 // Ton van den Brink
4404 // Cables and cooling tubes are approximated with proper materials and
4405 // rectangular cross sections, always preserving the total material budget.
4408 // Dimensions and positions of the A-Side Cable Trays
4409 // (parts of 0872/G/D)
4410 const Double_t kTrayARTrans = 408.35 *fgkmm;
4411 const Double_t kTrayAZTrans = 1011.00 *fgkmm;
4412 const Double_t kForwardSideYTrans = 12.00 *fgkmm;//!!!TO BE CHECKED!!!
4413 const Double_t kCoversYTrans = 2.00 *fgkmm;
4414 const Double_t kTrayAZRot = (180-169.5);// Degrees
4415 const Double_t kTrayAFirstRotAng = 22.00; // Degrees
4416 const Double_t kTrayASecondRotAng = 15.00; // Degrees
4418 const Double_t kTrayTotalHeight = 52.00 *fgkmm;
4419 const Double_t kTrayHeighToBend = 32.00 *fgkmm;
4420 const Double_t kTrayWidth = 130.00 *fgkmm;
4421 const Double_t kTrayThick = 2.00 *fgkmm;
4423 const Double_t kTrayBendAngle = 22.00 *TMath::DegToRad();
4425 const Double_t kForwardTrayTotalLen = 853.00 *fgkmm;
4426 const Double_t kForwardTrayFirstLen = 350.00 *fgkmm;
4427 const Double_t kForwardTrayFirstHeight = 47.00 *fgkmm;
4428 const Double_t kForwardCoverLen = 420.00 *fgkmm;
4430 const Double_t kForwardSideLength = kForwardTrayFirstLen;//!!!TO BE CHECKED!!!
4431 const Double_t kForwardSideHeight = 90.00 *fgkmm;//!!!TO BE CHECKED!!!
4432 const Double_t kForwardSideThick = 1.00 *fgkmm;//!!!TO BE CHECKED!!!
4433 const Double_t kForwardCoverHeight = 10.00 *fgkmm;//!!!TO BE CHECKED!!!
4435 const Double_t kExternalTrayTotalLen = 1200.00 *fgkmm;
4436 const Double_t kExternalCoverLen = kExternalTrayTotalLen;
4437 const Double_t kExternalCoverThick = 5.00 *fgkmm;
4439 const Int_t kForwardTrayNpoints = 16;
4441 const Double_t kServicesWidth = 100.00 *fgkmm;
4442 const Double_t kCopperHeight = 11.20 *fgkmm;// 1120 mm^2
4443 const Double_t kCablePlasticHeight = 11.50 *fgkmm;// 1150 mm^2
4444 const Double_t kCoolingWaterHeight = 2.65 *fgkmm;// 265 mm^2
4445 const Double_t kPoliUrethaneHeight = 4.62 *fgkmm;// 462 mm^2
4449 Double_t xprof[kForwardTrayNpoints], yprof[kForwardTrayNpoints];
4450 Double_t xloc, yloc, zloc, alpharot, totalhi;
4453 // The two tray components as assemblies
4454 TGeoVolumeAssembly *cableTrayAForw =
4455 new TGeoVolumeAssembly("ITSsupportSSDTrayAForw");
4456 TGeoVolumeAssembly *cableTrayAExt =
4457 new TGeoVolumeAssembly("ITSsupportSSDTrayAExt");
4460 // First create all needed shapes
4462 // The first part of the forward tray (part of 0872/G/D/07): a Xtru
4463 TGeoXtru *forwTrayPart1 = new TGeoXtru(2);
4465 xprof[3] = kTrayWidth/2;
4466 yprof[3] = kForwardTrayFirstHeight;
4467 xprof[2] = xprof[3] - kTrayThick;
4468 yprof[2] = yprof[3];
4469 xprof[4] = xprof[3];
4470 yprof[4] = kTrayTotalHeight - kTrayHeighToBend;
4471 xprof[5] = xprof[4] - yprof[4]*TMath::Tan(kTrayBendAngle);
4474 InsidePoint( xprof[3], yprof[3], xprof[4], yprof[4], xprof[5], yprof[5],
4475 -kTrayThick, xprof[1], yprof[1]);
4477 xprof[6] = -xprof[5];
4478 yprof[6] = yprof[5];
4480 InsidePoint( xprof[4], yprof[4], xprof[5], yprof[5], xprof[6], yprof[6],
4481 -kTrayThick, xprof[0], yprof[0]);
4483 // We did the right side, now reflex on the left side
4484 for (Int_t jp = 0; jp < 6; jp++) {
4485 xprof[6+jp] = -xprof[5-jp];
4486 yprof[6+jp] = yprof[5-jp];
4489 // And now the actual Xtru
4490 forwTrayPart1->DefinePolygon(12, xprof, yprof);
4491 forwTrayPart1->DefineSection(0, 0);
4492 forwTrayPart1->DefineSection(1, kForwardTrayFirstLen);
4494 // The second part of the forward tray (part of 0872/G/D/07): a Xtru
4495 TGeoXtru *forwTrayPart2 =
4496 CreateSDDSSDTraysSideA(kForwardTrayTotalLen - kForwardTrayFirstLen,
4499 // The external tray (as 0872/G/D/03): a Xtru with same profile
4500 TGeoXtru *externalTray = CreateSDDSSDTraysSideA(kExternalTrayTotalLen,
4503 // The side wall of the forward tray: a BBox
4504 TGeoBBox *forwSide = new TGeoBBox(kForwardSideThick/2,
4505 kForwardSideHeight/2,
4506 kForwardSideLength/2);
4508 // The side cover over the walls: a Xtru
4509 TGeoXtru *forwSideCover = new TGeoXtru(2);
4510 forwSideCover->SetName("ITSsuppSSDForwCover");
4512 xprof[0] = kTrayWidth/2 + 2*kForwardSideThick;
4513 yprof[0] = kForwardCoverHeight;
4514 xprof[1] = xprof[0];
4516 xprof[2] = xprof[1] - kForwardSideThick;
4517 yprof[2] = yprof[1];
4518 xprof[3] = xprof[2];
4519 yprof[3] = yprof[0] - kForwardSideThick;
4521 // We did the right side, now reflex on the left side
4522 for (Int_t jp = 0; jp < 4; jp++) {
4523 xprof[4+jp] = -xprof[3-jp];
4524 yprof[4+jp] = yprof[3-jp];
4527 forwSideCover->DefinePolygon(8, xprof, yprof);
4528 forwSideCover->DefineSection(0, 0);
4529 forwSideCover->DefineSection(1, kForwardSideLength);
4531 // The forward and external covers: two Composite Shape's
4532 TGeoCompositeShape *forwardCover = CreateTrayAForwardCover(kForwardCoverLen);
4534 TGeoCompositeShape *externCover = CreateTrayAExternalCover(kExternalCoverLen);
4536 // The cable copper inside the forward tray: a BBox
4537 TGeoBBox *forwCopper = new TGeoBBox(kServicesWidth/2,
4539 kForwardTrayTotalLen/2);
4541 // The cable copper inside the forward tray: a Xtru
4542 TGeoXtru *extCopper = new TGeoXtru(2);
4543 extCopper->SetName("ITSsuppSSDExtTrayCopper");
4545 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans
4548 xprof[0] = -totalhi*TanD(kTrayAZRot);
4549 yprof[0] = kTrayThick;
4550 xprof[1] = kExternalTrayTotalLen;
4551 yprof[1] = yprof[0];
4552 xprof[2] = xprof[1];
4553 yprof[2] = yprof[1] + kCopperHeight;
4554 totalhi -= kCopperHeight;
4555 xprof[3] = -totalhi*TanD(kTrayAZRot);
4556 yprof[3] = yprof[2];
4558 extCopper->DefinePolygon(4, xprof, yprof);
4559 extCopper->DefineSection(0, 0);
4560 extCopper->DefineSection(1, kServicesWidth);
4562 // The cable plastic inside the forward tray: a BBox
4563 TGeoBBox *forwPlastic = new TGeoBBox(kServicesWidth/2,
4564 kCablePlasticHeight/2,
4565 kForwardTrayTotalLen/2);
4567 // The cable plastic inside the forward tray: a Xtru
4568 TGeoXtru *extPlastic = new TGeoXtru(2);
4569 extPlastic->SetName("ITSsuppSSDExtTrayPlastic");
4571 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans
4572 - kTrayThick - kCopperHeight;
4574 xprof[0] = -totalhi*TanD(kTrayAZRot);
4575 yprof[0] = kTrayThick;
4576 xprof[1] = kExternalTrayTotalLen;
4577 yprof[1] = yprof[0];
4578 xprof[2] = xprof[1];
4579 yprof[2] = yprof[1] + kCablePlasticHeight;
4580 totalhi -= kCablePlasticHeight;
4581 xprof[3] = -totalhi*TanD(kTrayAZRot);
4582 yprof[3] = yprof[2];
4584 extPlastic->DefinePolygon(4, xprof, yprof);
4585 extPlastic->DefineSection(0, 0);
4586 extPlastic->DefineSection(1, kServicesWidth);
4588 // The cooling water inside the forward tray: a BBox
4589 TGeoBBox *forwWater = new TGeoBBox(kServicesWidth/2,
4590 kCoolingWaterHeight/2,
4591 kForwardTrayTotalLen/2);
4593 // The cooling water inside the forward tray: a Xtru
4594 TGeoXtru *extWater = new TGeoXtru(2);
4595 extWater->SetName("ITSsuppSSDExtTrayWater");
4597 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans
4598 - kTrayThick - kCopperHeight - kCablePlasticHeight;
4600 xprof[0] = -totalhi*TanD(kTrayAZRot);
4601 yprof[0] = kTrayThick;
4602 xprof[1] = kExternalTrayTotalLen;
4603 yprof[1] = yprof[0];
4604 xprof[2] = xprof[1];
4605 yprof[2] = yprof[1] + kCoolingWaterHeight;
4606 totalhi -= kCoolingWaterHeight;
4607 xprof[3] = -totalhi*TanD(kTrayAZRot);
4608 yprof[3] = yprof[2];
4610 extWater->DefinePolygon(4, xprof, yprof);
4611 extWater->DefineSection(0, 0);
4612 extWater->DefineSection(1, kServicesWidth);
4614 // The polyurethane inside the forward tray: a BBox
4615 TGeoBBox *forwPUR = new TGeoBBox(kServicesWidth/2,
4616 kPoliUrethaneHeight/2,
4617 kForwardTrayTotalLen/2);
4619 // The poliurethane inside the forward tray: a Xtru
4620 TGeoXtru *extPUR = new TGeoXtru(2);
4621 extPUR->SetName("ITSsuppSSDExtTrayPUR");
4623 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans
4624 - kTrayThick - kCopperHeight - kCablePlasticHeight
4625 - kCoolingWaterHeight;
4627 xprof[0] = -totalhi*TanD(kTrayAZRot);
4628 yprof[0] = kTrayThick;
4629 xprof[1] = kExternalTrayTotalLen;
4630 yprof[1] = yprof[0];
4631 xprof[2] = xprof[1];
4632 yprof[2] = yprof[1] + kPoliUrethaneHeight;
4633 totalhi -= kPoliUrethaneHeight;
4634 xprof[3] = -totalhi*TanD(kTrayAZRot);
4635 yprof[3] = yprof[2];
4637 extPUR->DefinePolygon(4, xprof, yprof);
4638 extPUR->DefineSection(0, 0);
4639 extPUR->DefineSection(1, kServicesWidth);
4642 // We have all shapes: now create the real volumes
4643 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
4644 TGeoMedium *medAntic = mgr->GetMedium("ITS_ANTICORODAL$");
4645 TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$");
4646 TGeoMedium *medFEP = mgr->GetMedium("ITS_SSD FEP$");
4647 TGeoMedium *medH2O = mgr->GetMedium("ITS_WATER$");
4648 TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$");
4650 TGeoVolume *forwTrayFirst = new TGeoVolume("ITSsuppSSDSideAForwTrayFirst",
4651 forwTrayPart1, medAl);
4653 forwTrayFirst->SetVisibility(kTRUE);
4654 forwTrayFirst->SetLineColor(6); // Purple
4655 forwTrayFirst->SetLineWidth(1);
4656 forwTrayFirst->SetFillColor(forwTrayFirst->GetLineColor());
4657 forwTrayFirst->SetFillStyle(4000); // 0% transparent
4659 TGeoVolume *forwTraySecond = new TGeoVolume("ITSsuppSSDSideAForwTraySecond",
4660 forwTrayPart2, medAl);
4662 forwTraySecond->SetVisibility(kTRUE);
4663 forwTraySecond->SetLineColor(6); // Purple
4664 forwTraySecond->SetLineWidth(1);
4665 forwTraySecond->SetFillColor(forwTraySecond->GetLineColor());
4666 forwTraySecond->SetFillStyle(4000); // 0% transparent
4668 TGeoVolume *forwTraySide = new TGeoVolume("ITSsuppSSDSideAForwTraySide",
4671 forwTraySide->SetVisibility(kTRUE);
4672 forwTraySide->SetLineColor(6); // Purple
4673 forwTraySide->SetLineWidth(1);
4674 forwTraySide->SetFillColor(forwTraySide->GetLineColor());
4675 forwTraySide->SetFillStyle(4000); // 0% transparent
4677 TGeoVolume *forwTraySideCover = new TGeoVolume("ITSsuppSSDSideAForwTraySideCover",
4678 forwSideCover, medAl);
4680 forwTraySideCover->SetVisibility(kTRUE);
4681 forwTraySideCover->SetLineColor(6); // Purple
4682 forwTraySideCover->SetLineWidth(1);
4683 forwTraySideCover->SetFillColor(forwTraySideCover->GetLineColor());
4684 forwTraySideCover->SetFillStyle(4000); // 0% transparent
4686 TGeoVolume *externalTraySSD = new TGeoVolume("ITSsuppSSDSideAExternalTray",
4687 externalTray, medAl);
4689 externalTraySSD->SetVisibility(kTRUE);
4690 externalTraySSD->SetLineColor(6); // Purple
4691 externalTraySSD->SetLineWidth(1);
4692 externalTraySSD->SetFillColor(externalTraySSD->GetLineColor());
4693 externalTraySSD->SetFillStyle(4000); // 0% transparent
4695 TGeoVolume *forwardTrayCover = new TGeoVolume("ITSsuppSSDSideAForwTrayCover",
4696 forwardCover, medAntic);
4698 forwardTrayCover->SetVisibility(kTRUE);
4699 forwardTrayCover->SetLineColor(kMagenta+1); // Purple
4700 forwardTrayCover->SetLineWidth(1);
4701 forwardTrayCover->SetFillColor(forwardTrayCover->GetLineColor());
4702 forwardTrayCover->SetFillStyle(4000); // 0% transparent
4704 TGeoVolume *externTrayCover = new TGeoVolume("ITSsuppSSDSideAExtTrayCover",
4705 externCover, medAntic);
4707 externTrayCover->SetVisibility(kTRUE);
4708 externTrayCover->SetLineColor(kMagenta+1); // Purple
4709 externTrayCover->SetLineWidth(1);
4710 externTrayCover->SetFillColor(externTrayCover->GetLineColor());
4711 externTrayCover->SetFillStyle(4000); // 0% transparent
4713 TGeoVolume *forwCableCu = new TGeoVolume("ITSsuppSSDSideAForwCableCu",
4716 forwCableCu->SetVisibility(kTRUE);
4717 forwCableCu->SetLineColor(kRed); // Red
4718 forwCableCu->SetLineWidth(1);
4719 forwCableCu->SetFillColor(forwCableCu->GetLineColor());
4720 forwCableCu->SetFillStyle(4000); // 0% transparent
4722 TGeoVolume *extCableCu = new TGeoVolume("ITSsuppSSDSideAExtCableCu",
4725 extCableCu->SetVisibility(kTRUE);
4726 extCableCu->SetLineColor(kRed); // Red
4727 extCableCu->SetLineWidth(1);
4728 extCableCu->SetFillColor(extCableCu->GetLineColor());
4729 extCableCu->SetFillStyle(4000); // 0% transparent
4731 TGeoVolume *forwCableFEP = new TGeoVolume("ITSsuppSSDSideAForwCableFEP",
4732 forwPlastic, medFEP);
4734 forwCableFEP->SetVisibility(kTRUE);
4735 forwCableFEP->SetLineColor(kYellow); // Yellow
4736 forwCableFEP->SetLineWidth(1);
4737 forwCableFEP->SetFillColor(forwCableFEP->GetLineColor());
4738 forwCableFEP->SetFillStyle(4000); // 0% transparent
4740 TGeoVolume *extCableFEP = new TGeoVolume("ITSsuppSSDSideAExtCableFEP",
4741 extPlastic, medFEP);
4743 extCableFEP->SetVisibility(kTRUE);
4744 extCableFEP->SetLineColor(kYellow); // Yellow
4745 extCableFEP->SetLineWidth(1);
4746 extCableFEP->SetFillColor(extCableFEP->GetLineColor());
4747 extCableFEP->SetFillStyle(4000); // 0% transparent
4749 TGeoVolume *forwTrayWater = new TGeoVolume("ITSsuppSSDSideAForwTrayWater",
4752 forwTrayWater->SetVisibility(kTRUE);
4753 forwTrayWater->SetLineColor(kBlue); // Blue
4754 forwTrayWater->SetLineWidth(1);
4755 forwTrayWater->SetFillColor(forwTrayWater->GetLineColor());
4756 forwTrayWater->SetFillStyle(4000); // 0% transparent
4758 TGeoVolume *extTrayWater = new TGeoVolume("ITSsuppSSDSideAExtTrayWater",
4761 extTrayWater->SetVisibility(kTRUE);
4762 extTrayWater->SetLineColor(kBlue); // Blue
4763 extTrayWater->SetLineWidth(1);
4764 extTrayWater->SetFillColor(extTrayWater->GetLineColor());
4765 extTrayWater->SetFillStyle(4000); // 0% transparent
4767 TGeoVolume *forwPolyUr = new TGeoVolume("ITSsuppSSDSideAForwPolyUr",
4770 forwPolyUr->SetVisibility(kTRUE);
4771 forwPolyUr->SetLineColor(kGray); // Gray
4772 forwPolyUr->SetLineWidth(1);
4773 forwPolyUr->SetFillColor(forwPolyUr->GetLineColor());
4774 forwPolyUr->SetFillStyle(4000); // 0% transparent
4776 TGeoVolume *extPolyUr = new TGeoVolume("ITSsuppSSDSideAExtPolyUr",
4779 extPolyUr->SetVisibility(kTRUE);
4780 extPolyUr->SetLineColor(kGray); // Gray
4781 extPolyUr->SetLineWidth(1);
4782 extPolyUr->SetFillColor(extPolyUr->GetLineColor());
4783 extPolyUr->SetFillStyle(4000); // 0% transparent
4786 // Now build up the tray
4787 cableTrayAForw->AddNode(forwTrayFirst, 1, 0);
4789 cableTrayAForw->AddNode(forwTraySecond, 1,
4790 new TGeoTranslation(0, 0, kForwardTrayFirstLen) );
4792 xloc = kTrayWidth/2 + kForwardSideThick/2;
4793 yloc = kForwardTrayFirstHeight + kForwardSideHeight/2 - kForwardSideYTrans;
4794 zloc = kForwardSideLength/2;
4795 cableTrayAForw->AddNode(forwTraySide,1,
4796 new TGeoTranslation( xloc, yloc, zloc) );
4797 cableTrayAForw->AddNode(forwTraySide,2,
4798 new TGeoTranslation(-xloc, yloc, zloc) );
4800 yloc = kForwardTrayFirstHeight + kForwardSideHeight - kForwardSideYTrans
4801 - kForwardCoverHeight;
4802 cableTrayAForw->AddNode(forwTraySideCover,1,
4803 new TGeoTranslation(0, yloc, 0) );
4805 yloc = kTrayTotalHeight - kCoversYTrans;
4806 zloc = kForwardTrayTotalLen - kForwardCoverLen;
4807 cableTrayAForw->AddNode(forwardTrayCover,1,
4808 new TGeoTranslation(0, yloc, zloc) );
4810 yloc = kTrayThick + forwCopper->GetDY();
4811 zloc = forwCopper->GetDZ();
4812 cableTrayAForw->AddNode(forwCableCu, 1,
4813 new TGeoTranslation(0, yloc, zloc) );
4815 yloc = kTrayThick + kCopperHeight + forwPlastic->GetDY();
4816 zloc = forwPlastic->GetDZ();
4817 cableTrayAForw->AddNode(forwCableFEP, 1,
4818 new TGeoTranslation(0, yloc, zloc) );
4820 yloc = kTrayThick + kCopperHeight + kCablePlasticHeight + forwWater->GetDY();
4821 zloc = forwWater->GetDZ();
4822 cableTrayAForw->AddNode(forwTrayWater, 1,
4823 new TGeoTranslation(0, yloc, zloc) );
4825 yloc = kTrayThick + kCopperHeight + kCablePlasticHeight
4826 + kCoolingWaterHeight + forwPUR->GetDY();
4827 zloc = forwPUR->GetDZ();
4828 cableTrayAForw->AddNode(forwPolyUr, 1,
4829 new TGeoTranslation(0, yloc, zloc) );
4831 // To simplify following placement in MARS, origin is on top
4832 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans;
4835 cableTrayAExt->AddNode(externalTraySSD, 1,
4836 new TGeoTranslation(0, yloc, 0) );
4838 yloc = -totalhi + kTrayTotalHeight - kCoversYTrans;
4839 cableTrayAExt->AddNode(externTrayCover,1,
4840 new TGeoTranslation(0, yloc, 0) );
4842 xloc = extCopper->GetDZ();
4844 cableTrayAExt->AddNode(extCableCu,1,
4845 new TGeoCombiTrans( xloc, yloc, 0,
4846 new TGeoRotation("",-90, 90, 90) ) );
4848 xloc = extPlastic->GetDZ();
4849 yloc = -totalhi + kCopperHeight;
4850 cableTrayAExt->AddNode(extCableFEP,1,
4851 new TGeoCombiTrans( xloc, yloc, 0,
4852 new TGeoRotation("",-90, 90, 90) ) );
4854 xloc = extWater->GetDZ();
4855 yloc = -totalhi + kCopperHeight + kCablePlasticHeight;
4856 cableTrayAExt->AddNode(extTrayWater,1,
4857 new TGeoCombiTrans( xloc, yloc, 0,
4858 new TGeoRotation("",-90, 90, 90) ) );
4860 xloc = extPUR->GetDZ();
4861 yloc = -totalhi + kCopperHeight + kCablePlasticHeight + kCoolingWaterHeight;
4862 cableTrayAExt->AddNode(extPolyUr,1,
4863 new TGeoCombiTrans( xloc, yloc, 0,
4864 new TGeoRotation("",-90, 90, 90) ) );
4867 // Finally put everything in the mother volume
4868 zloc = kTrayAZTrans;
4869 Double_t zlocext = zloc + kForwardTrayTotalLen;
4870 Double_t rExtTray = kTrayARTrans + kTrayTotalHeight;
4872 alpharot = kTrayAFirstRotAng;
4873 xloc = kTrayARTrans*SinD(alpharot);
4874 yloc = kTrayARTrans*CosD(alpharot);
4875 moth->AddNode(cableTrayAForw,1,
4876 new TGeoCombiTrans( xloc, yloc, zloc,
4877 new TGeoRotation("",-alpharot,0,0) ) );
4878 xloc = rExtTray*SinD(alpharot);
4879 yloc = rExtTray*CosD(alpharot);
4880 moth->AddNode(cableTrayAExt,1,
4881 new TGeoCombiTrans( xloc, yloc, zlocext,
4882 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
4885 xloc = kTrayARTrans*SinD(alpharot);
4886 yloc = kTrayARTrans*CosD(alpharot);
4887 moth->AddNode(cableTrayAForw,2,
4888 new TGeoCombiTrans( xloc, yloc, zloc,
4889 new TGeoRotation("",-alpharot,0,0) ) );
4890 xloc = rExtTray*SinD(alpharot);
4891 yloc = rExtTray*CosD(alpharot);
4892 moth->AddNode(cableTrayAExt,2,
4893 new TGeoCombiTrans( xloc, yloc, zlocext,
4894 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
4896 alpharot = -kTrayAFirstRotAng - 2*kTrayASecondRotAng;
4897 xloc = kTrayARTrans*SinD(alpharot);
4898 yloc = kTrayARTrans*CosD(alpharot);
4899 moth->AddNode(cableTrayAForw,3,
4900 new TGeoCombiTrans( xloc, yloc, zloc,
4901 new TGeoRotation("",-alpharot,0,0) ) );
4902 xloc = rExtTray*SinD(alpharot);
4903 yloc = rExtTray*CosD(alpharot);
4904 moth->AddNode(cableTrayAExt,3,
4905 new TGeoCombiTrans( xloc, yloc, zlocext,
4906 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
4909 xloc = kTrayARTrans*SinD(alpharot);
4910 yloc = kTrayARTrans*CosD(alpharot);
4911 moth->AddNode(cableTrayAForw,4,
4912 new TGeoCombiTrans( xloc, yloc, zloc,
4913 new TGeoRotation("",-alpharot,0,0) ) );
4914 xloc = rExtTray*SinD(alpharot);
4915 yloc = rExtTray*CosD(alpharot);
4916 moth->AddNode(cableTrayAExt,4,
4917 new TGeoCombiTrans( xloc, yloc, zlocext,
4918 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
4924 //______________________________________________________________________
4925 void AliITSv11GeometrySupport::SSDCableTraysSideC(TGeoVolume *moth,
4928 // Creates the SSD cable trays which are outside the ITS support cones
4929 // but still inside the TPC on Side C
4930 // (part of this code is taken or anyway inspired to ServicesCableSupport
4931 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
4934 // moth : the TGeoVolume owing the volume structure
4935 // mgr : the GeoManager (default gGeoManager)
4938 // Created: ??? Bjorn S. Nilsen
4939 // Updated: 15 Apr 2010 Mario Sitta
4941 // Technical data are taken from AutoCAD drawings and other (oral)
4942 // information given by F.Tosello
4945 // Dimensions and positions of the C-Side Cable Tray elements
4946 const Int_t kNumTraySideC = 4;
4948 const Double_t kSideCFoldAngle = 5.00 *fgkDegree;
4950 const Double_t kServicesWidth = 100.00 *fgkmm;
4951 const Double_t kCopperHeight = 11.20 *fgkmm;// 1120 mm^2
4952 const Double_t kCablePlasticHeight = 11.50 *fgkmm;// 1150 mm^2
4953 const Double_t kCoolingWaterHeight = 2.65 *fgkmm;// 265 mm^2
4954 const Double_t kPoliUrethaneHeight = 4.62 *fgkmm;// 462 mm^2
4956 // Overall position and rotation of the C-Side Cable Trays
4957 const Double_t kTraySideCRPos = 45.30 *fgkcm;
4958 const Double_t kTraySideCZPos = -102.40 *fgkcm;
4959 const Double_t kTraySideCAlphaRot[kNumTraySideC] = { 23.0, -59.0,
4960 /* from Patch panel position */ 180.+23.0, 180.-59.0};
4964 Double_t xprof[6], yprof[6];
4965 Double_t xloc, yloc, alpharot, alphafold;
4968 // The assembly holding the metallic structure
4969 TGeoVolumeAssembly *trayStructure =
4970 CreateSDDSSDTraysSideC("ITSsupportSSDTrayC");
4972 // The cable copper inside the tray: a Xtru
4973 TGeoXtru *copper = new TGeoXtru(2);
4974 copper->SetName("ITSsuppSSDTrayCCopper");
4976 // Copper lies on the lower plate: get position of its points
4977 TGeoXtru *lowerplate = (TGeoXtru*)(mgr->GetVolume("ITSsuppTraySideCLower")->GetShape());
4978 xprof[0] = lowerplate->GetX(5);
4979 yprof[0] = lowerplate->GetY(5);
4980 xprof[1] = lowerplate->GetX(4);
4981 yprof[1] = lowerplate->GetY(4);
4982 xprof[2] = lowerplate->GetX(3);
4983 yprof[2] = lowerplate->GetY(3);
4984 xprof[3] = xprof[2] - kCopperHeight*SinD(kSideCFoldAngle);
4985 yprof[3] = yprof[2] + kCopperHeight*CosD(kSideCFoldAngle);
4986 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
4987 kCopperHeight , xprof[4], yprof[4]);
4988 xprof[5] = xprof[0];
4989 yprof[5] = yprof[0] + kCopperHeight;
4991 copper->DefinePolygon(6, xprof, yprof);
4992 copper->DefineSection(0, -kServicesWidth/2);
4993 copper->DefineSection(1, kServicesWidth/2);
4995 // The cable plastic inside the tray: a Xtru
4996 TGeoXtru *plastic = new TGeoXtru(2);
4997 plastic->SetName("ITSsuppSSDTrayCPlastic");
4999 xprof[0] = copper->GetX(5);
5000 yprof[0] = copper->GetY(5);
5001 xprof[1] = copper->GetX(4);
5002 yprof[1] = copper->GetY(4);
5003 xprof[2] = copper->GetX(3);
5004 yprof[2] = copper->GetY(3);
5005 xprof[3] = xprof[2] - kCablePlasticHeight*SinD(kSideCFoldAngle);
5006 yprof[3] = yprof[2] + kCablePlasticHeight*CosD(kSideCFoldAngle);
5007 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5008 kCablePlasticHeight , xprof[4], yprof[4]);
5009 xprof[5] = xprof[0];
5010 yprof[5] = yprof[0] + kCablePlasticHeight;
5012 plastic->DefinePolygon(6, xprof, yprof);
5013 plastic->DefineSection(0, -kServicesWidth/2);
5014 plastic->DefineSection(1, kServicesWidth/2);
5016 // The cooling water inside the tray: a Xtru
5017 TGeoXtru *water = new TGeoXtru(2);
5018 water->SetName("ITSsuppSSDTrayCWater");
5020 xprof[0] = plastic->GetX(5);
5021 yprof[0] = plastic->GetY(5);
5022 xprof[1] = plastic->GetX(4);
5023 yprof[1] = plastic->GetY(4);
5024 xprof[2] = plastic->GetX(3);
5025 yprof[2] = plastic->GetY(3);
5026 xprof[3] = xprof[2] - kCoolingWaterHeight*SinD(kSideCFoldAngle);
5027 yprof[3] = yprof[2] + kCoolingWaterHeight*CosD(kSideCFoldAngle);
5028 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5029 kCoolingWaterHeight , xprof[4], yprof[4]);
5030 xprof[5] = xprof[0];
5031 yprof[5] = yprof[0] + kCoolingWaterHeight;
5033 water->DefinePolygon(6, xprof, yprof);
5034 water->DefineSection(0, -kServicesWidth/2);
5035 water->DefineSection(1, kServicesWidth/2);
5037 // The poliurethane inside the tray: a Xtru
5038 TGeoXtru *PUR = new TGeoXtru(2);
5039 PUR->SetName("ITSsuppSSDTrayCPUR");
5041 xprof[0] = water->GetX(5);
5042 yprof[0] = water->GetY(5);
5043 xprof[1] = water->GetX(4);
5044 yprof[1] = water->GetY(4);
5045 xprof[2] = water->GetX(3);
5046 yprof[2] = water->GetY(3);
5047 xprof[3] = xprof[2] - kPoliUrethaneHeight*SinD(kSideCFoldAngle);
5048 yprof[3] = yprof[2] + kPoliUrethaneHeight*CosD(kSideCFoldAngle);
5049 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5050 kPoliUrethaneHeight , xprof[4], yprof[4]);
5051 xprof[5] = xprof[0];
5052 yprof[5] = yprof[0] + kPoliUrethaneHeight;
5054 PUR->DefinePolygon(6, xprof, yprof);
5055 PUR->DefineSection(0, -kServicesWidth/2);
5056 PUR->DefineSection(1, kServicesWidth/2);
5059 // We have all shapes: now create the real volumes
5060 TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$");
5061 TGeoMedium *medFEP = mgr->GetMedium("ITS_SSD FEP$");
5062 TGeoMedium *medH2O = mgr->GetMedium("ITS_WATER$");
5063 TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$");
5065 TGeoVolume *copperCable = new TGeoVolume("ITSsuppSSDSideCCableCu",
5068 copperCable->SetVisibility(kTRUE);
5069 copperCable->SetLineColor(kRed); // Red
5070 copperCable->SetLineWidth(1);
5071 copperCable->SetFillColor(copperCable->GetLineColor());
5072 copperCable->SetFillStyle(4000); // 0% transparent
5074 TGeoVolume *cableFEP = new TGeoVolume("ITSsuppSSDSideCCableFEP",
5077 cableFEP->SetVisibility(kTRUE);
5078 cableFEP->SetLineColor(kYellow); // Yellow
5079 cableFEP->SetLineWidth(1);
5080 cableFEP->SetFillColor(cableFEP->GetLineColor());
5081 cableFEP->SetFillStyle(4000); // 0% transparent
5083 TGeoVolume *trayWater = new TGeoVolume("ITSsuppSSDSideCTrayWater",
5086 trayWater->SetVisibility(kTRUE);
5087 trayWater->SetLineColor(kBlue); // Blue
5088 trayWater->SetLineWidth(1);
5089 trayWater->SetFillColor(trayWater->GetLineColor());
5090 trayWater->SetFillStyle(4000); // 0% transparent
5092 TGeoVolume *trayPolyUr = new TGeoVolume("ITSsuppSSDSideCPolyUr",
5095 trayPolyUr->SetVisibility(kTRUE);
5096 trayPolyUr->SetLineColor(kGray); // Gray
5097 trayPolyUr->SetLineWidth(1);
5098 trayPolyUr->SetFillColor(trayPolyUr->GetLineColor());
5099 trayPolyUr->SetFillStyle(4000); // 0% transparent
5102 // Now fill in the tray
5103 trayStructure->AddNode(copperCable,1,0);
5104 trayStructure->AddNode(cableFEP,1,0);
5105 trayStructure->AddNode(trayWater,1,0);
5106 trayStructure->AddNode(trayPolyUr,1,0);
5109 // Finally put everything in the mother volume
5110 alphafold = kSideCFoldAngle;
5112 for (Int_t jt = 0; jt < kNumTraySideC; jt++) {
5113 alpharot = kTraySideCAlphaRot[jt];
5114 xloc = kTraySideCRPos*SinD(alpharot);
5115 yloc = kTraySideCRPos*CosD(alpharot);
5116 moth->AddNode(trayStructure,jt+1,
5117 new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos,
5118 new TGeoRotation("",-90.+alpharot,-90.,90.+alphafold)));
5125 //______________________________________________________________________
5126 TGeoVolumeAssembly* AliITSv11GeometrySupport::CreateSDDForwardTraySideA(TGeoManager *mgr){
5128 // Creates the forward SDD tray on Side A (0872/G/D/01)
5131 // mgr : the GeoManager (used only to get the proper material)
5135 // Return: a TGeoVolumeAssembly for the tray
5137 // Created: 08 Jan 2010 Mario Sitta
5139 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
5140 // drawings and other (oral) information given by F.Tosello
5143 // Dimensions of the A-Side Forward Cable Tray (0872/G/D/01)
5144 const Double_t kForwardTrayThick = 2.00 *fgkmm;
5145 const Double_t kForwardTraySideLength = 823.00 *fgkmm;
5146 const Double_t kForwardTrayTailLength = 212.00 *fgkmm;
5147 const Double_t kForwardTrayBaseHalfWide = 55.00 *fgkmm;
5148 const Double_t kForwardTrayNotchLength = 47.20 *fgkmm;
5149 const Double_t kForwardTrayNotchHeight = 25.00 *fgkmm;
5150 const Double_t kForwardTrayNotchDown = 10.00 *fgkmm;
5151 const Double_t kForwardTraySide1Height = 39.00 *fgkmm;
5152 const Double_t kForwardTraySide2Height = 26.00 *fgkmm;
5153 const Double_t kForwardTraySide2Expand = 10.50 *fgkmm;
5154 const Double_t kForwardTraySide3TailLen = 418.00 *fgkmm;
5155 const Double_t kForwardTraySide3TailHi = 31.00 *fgkmm;
5156 const Double_t kForwardTraySide3HeadLen = 425.00 *fgkmm;
5157 const Double_t kForwardTraySide3HeadHi = 72.00 *fgkmm;
5158 const Double_t kForwardTrayHorWingWide = 10.50 *fgkmm;
5159 const Double_t kForwardTrayVertWingWide = 15.00 *fgkmm;
5161 const Int_t kForwardTraySideNpoints = 9;
5165 Double_t xprof[kForwardTraySideNpoints], yprof[kForwardTraySideNpoints];
5166 Double_t ylen, zlen;
5167 Double_t xloc, yloc, zloc;
5170 // The tray has a very complex shape, so it is made by assembling
5171 // different elements (with some small simplifications): the result
5172 // is a TGeoAssembly returned to the caller
5173 TGeoVolumeAssembly *forwardTray = new TGeoVolumeAssembly("ITSsuppSDDForwardTray");
5175 // The tray base: a BBox
5176 zlen = (kForwardTraySideLength-kForwardTrayTailLength)/2;
5177 TGeoBBox *trayBase = new TGeoBBox(kForwardTrayBaseHalfWide,
5178 kForwardTrayThick/2, zlen);
5180 // The first part of the side wall: a Xtru
5181 TGeoXtru *traySide1 = new TGeoXtru(2);
5184 yprof[0] = kForwardTrayThick;
5185 xprof[1] = kForwardTraySideLength-kForwardTrayTailLength;
5186 yprof[1] = yprof[0];
5187 xprof[2] = kForwardTraySideLength;
5188 yprof[2] = kForwardTraySide1Height + kForwardTrayThick;
5190 yprof[3] = yprof[2];
5192 traySide1->DefinePolygon(4, xprof, yprof);
5193 traySide1->DefineSection(0, 0);
5194 traySide1->DefineSection(1, kForwardTrayThick);
5196 // The second part of the side wall: a Xtru
5197 TGeoXtru *traySide2 = new TGeoXtru(2);
5199 xprof[0] = kForwardTrayBaseHalfWide - kForwardTrayThick;
5200 yprof[0] = traySide1->GetY(2);
5201 xprof[1] = kForwardTrayBaseHalfWide;
5202 yprof[1] = yprof[0];
5203 xprof[2] = xprof[1] + kForwardTraySide2Expand;
5204 yprof[2] = yprof[1] + kForwardTraySide2Height;
5205 xprof[3] = xprof[2] - kForwardTrayThick;
5206 yprof[3] = yprof[2];
5208 traySide2->DefinePolygon(4, xprof, yprof);
5209 traySide2->DefineSection(0, 0);
5210 traySide2->DefineSection(1, kForwardTraySideLength);
5212 // The third part of the side wall: a Xtru
5213 TGeoXtru *traySide3 = new TGeoXtru(2);
5216 yprof[0] = traySide2->GetY(2);
5217 xprof[1] = kForwardTraySideLength;
5218 yprof[1] = yprof[0];
5219 xprof[2] = xprof[1];
5220 yprof[2] = yprof[1] + kForwardTraySide3TailHi - kForwardTrayThick;
5221 xprof[3] = xprof[2] - kForwardTraySide3TailLen - kForwardTrayThick;
5222 yprof[3] = yprof[2];
5223 xprof[4] = xprof[3];
5224 yprof[4] = yprof[3] + kForwardTraySide3HeadHi + kForwardTrayThick;
5225 xprof[5] = xprof[4] - kForwardTraySide3HeadLen;
5226 yprof[5] = yprof[4];
5227 xprof[6] = xprof[5];
5228 yprof[6] = yprof[5] - kForwardTrayNotchHeight;
5229 xprof[7] = xprof[6] + kForwardTrayNotchLength;
5230 yprof[7] = yprof[6];
5231 xprof[8] = xprof[7];
5232 yprof[8] = yprof[7] - kForwardTrayNotchDown;
5234 traySide3->DefinePolygon(9, xprof, yprof);
5235 traySide3->DefineSection(0, 0);
5236 traySide3->DefineSection(1, kForwardTrayThick);
5238 // The horizontal wing: a BBox
5239 TGeoBBox *trayHorWing = new TGeoBBox(kForwardTrayHorWingWide/2,
5240 kForwardTrayThick/2,
5241 kForwardTraySide3TailLen/2);
5243 // The vertical wing: a BBox
5244 ylen = (traySide3->GetY(4) - traySide3->GetY(3))/2;
5245 TGeoBBox *trayVertWing = new TGeoBBox(kForwardTrayVertWingWide/2,
5246 ylen, kForwardTrayThick/2);
5249 // We have all shapes: now create the real volumes
5250 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
5252 TGeoVolume *forwTrayBase = new TGeoVolume("ITSsuppSDDSideAForwTrayBase",
5255 forwTrayBase->SetVisibility(kTRUE);
5256 forwTrayBase->SetLineColor(6); // Purple
5257 forwTrayBase->SetLineWidth(1);
5258 forwTrayBase->SetFillColor(forwTrayBase->GetLineColor());
5259 forwTrayBase->SetFillStyle(4000); // 0% transparent
5261 TGeoVolume *forwTraySide1 = new TGeoVolume("ITSsuppSDDSideAForwTraySide1",
5264 forwTraySide1->SetVisibility(kTRUE);
5265 forwTraySide1->SetLineColor(6); // Purple
5266 forwTraySide1->SetLineWidth(1);
5267 forwTraySide1->SetFillColor(forwTraySide1->GetLineColor());
5268 forwTraySide1->SetFillStyle(4000); // 0% transparent
5270 TGeoVolume *forwTraySide2 = new TGeoVolume("ITSsuppSDDSideAForwTraySide2",
5273 forwTraySide2->SetVisibility(kTRUE);
5274 forwTraySide2->SetLineColor(6); // Purple
5275 forwTraySide2->SetLineWidth(1);
5276 forwTraySide2->SetFillColor(forwTraySide2->GetLineColor());
5277 forwTraySide2->SetFillStyle(4000); // 0% transparent
5279 TGeoVolume *forwTraySide3 = new TGeoVolume("ITSsuppSDDSideAForwTraySide3",
5282 forwTraySide3->SetVisibility(kTRUE);
5283 forwTraySide3->SetLineColor(6); // Purple
5284 forwTraySide3->SetLineWidth(1);
5285 forwTraySide3->SetFillColor(forwTraySide3->GetLineColor());
5286 forwTraySide3->SetFillStyle(4000); // 0% transparent
5288 TGeoVolume *forwTrayHWing = new TGeoVolume("ITSsuppSDDSideAForwTrayHorWing",
5289 trayHorWing, medAl);
5291 forwTrayHWing->SetVisibility(kTRUE);
5292 forwTrayHWing->SetLineColor(6); // Purple
5293 forwTrayHWing->SetLineWidth(1);
5294 forwTrayHWing->SetFillColor(forwTrayHWing->GetLineColor());
5295 forwTrayHWing->SetFillStyle(4000); // 0% transparent
5297 TGeoVolume *forwTrayVWing = new TGeoVolume("ITSsuppSDDSideAForwTrayVertWing",
5298 trayVertWing, medAl);
5300 forwTrayVWing->SetVisibility(kTRUE);
5301 forwTrayVWing->SetLineColor(6); // Purple
5302 forwTrayVWing->SetLineWidth(1);
5303 forwTrayVWing->SetFillColor(forwTrayVWing->GetLineColor());
5304 forwTrayVWing->SetFillStyle(4000); // 0% transparent
5307 // Now build up the tray
5308 yloc = kForwardTrayThick/2;
5310 forwardTray->AddNode(forwTrayBase, 1,
5311 new TGeoTranslation(0, yloc, zloc) );
5313 xloc = kForwardTrayBaseHalfWide;
5314 forwardTray->AddNode(forwTraySide1, 1,
5315 new TGeoCombiTrans(xloc, 0, 0,
5316 new TGeoRotation("",90,-90,-90)));
5317 xloc = -xloc + kForwardTrayThick;
5318 forwardTray->AddNode(forwTraySide1, 2,
5319 new TGeoCombiTrans(xloc, 0, 0,
5320 new TGeoRotation("",90,-90,-90)));
5322 forwardTray->AddNode(forwTraySide2, 1, 0);
5323 zloc = kForwardTraySideLength;
5324 forwardTray->AddNode(forwTraySide2, 2,
5325 new TGeoCombiTrans(0, 0, zloc,
5326 new TGeoRotation("",90,-180,-90)));
5328 xloc = kForwardTrayBaseHalfWide + kForwardTraySide2Expand;
5329 forwardTray->AddNode(forwTraySide3, 1,
5330 new TGeoCombiTrans(xloc, 0, 0,
5331 new TGeoRotation("",90,-90,-90)));
5332 xloc = -xloc + kForwardTrayThick;
5333 forwardTray->AddNode(forwTraySide3, 2,
5334 new TGeoCombiTrans(xloc, 0, 0,
5335 new TGeoRotation("",90,-90,-90)));
5337 xloc = kForwardTrayBaseHalfWide + kForwardTraySide2Expand
5338 - kForwardTrayHorWingWide/2;
5339 yloc = traySide3->GetY(2) + kForwardTrayThick/2;
5340 zloc = kForwardTraySideLength - trayHorWing->GetDZ();
5341 forwardTray->AddNode(forwTrayHWing, 1,
5342 new TGeoTranslation( xloc, yloc, zloc) );
5343 forwardTray->AddNode(forwTrayHWing, 2,
5344 new TGeoTranslation(-xloc, yloc, zloc) );
5346 xloc = kForwardTrayBaseHalfWide + kForwardTraySide2Expand
5347 - kForwardTrayVertWingWide/2;
5348 yloc = traySide3->GetY(2) + trayVertWing->GetDY();
5349 zloc = traySide3->GetX(3) + kForwardTrayThick/2;
5350 forwardTray->AddNode(forwTrayVWing, 1,
5351 new TGeoTranslation( xloc, yloc, zloc) );
5352 forwardTray->AddNode(forwTrayVWing, 2,
5353 new TGeoTranslation(-xloc, yloc, zloc) );
5359 //______________________________________________________________________
5360 TGeoCompositeShape* AliITSv11GeometrySupport::CreateTrayAForwardCover(const Double_t coverLen){
5362 // Creates the forward cover of the SDD and SSD cable trays on Side A
5366 // coverLen: the total length of the cover
5370 // Return: a TGeoCompositeShape for the cover
5372 // Created: 03 Jan 2010 Mario Sitta
5374 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
5375 // drawings and other (oral) information given by F.Tosello
5378 // Dimensions and positions of the A-Side Cable Tray Forward Cover
5380 const Double_t kForwardCoverWide = 130.00 *fgkmm;
5381 const Double_t kForwardCoverSideWide = 10.00 *fgkmm;
5382 const Double_t kForwardCoverHoleLen = 160.00 *fgkmm;
5383 const Double_t kForwardCoverHoleWide = 90.00 *fgkmm;
5384 const Double_t kForwardCoverHoleR10 = 10.00 *fgkmm;
5385 const Double_t kForwardCoverTotalThick = 5.00 *fgkmm;
5386 const Double_t kForwardCoverSideThick = 3.00 *fgkmm;
5387 const Double_t kForwardCoverInternThick = 2.00 *fgkmm;
5389 const Double_t kForwardCoverHoleZTrans = 40.00 *fgkmm;
5393 Double_t xprof[16], yprof[16];
5394 Double_t yloc, zloc;
5397 // The main shape: a Xtru
5398 TGeoXtru *forwCoverMain = new TGeoXtru(2);
5399 forwCoverMain->SetName("ITSsuppForwCoverMain");
5401 xprof[0] = kForwardCoverWide/2;
5402 yprof[0] = kForwardCoverTotalThick;
5403 xprof[1] = xprof[0];
5404 yprof[1] = yprof[0] - kForwardCoverSideThick;
5405 xprof[2] = xprof[1] - kForwardCoverSideWide;
5406 yprof[2] = yprof[1];
5407 xprof[3] = xprof[2];
5410 // We did the right side, now reflex on the left side
5411 for (Int_t jp = 0; jp < 4; jp++) {
5412 xprof[4+jp] = -xprof[3-jp];
5413 yprof[4+jp] = yprof[3-jp];
5416 // And now the actual Xtru
5417 forwCoverMain->DefinePolygon(8, xprof, yprof);
5418 forwCoverMain->DefineSection(0, 0);
5419 forwCoverMain->DefineSection(1, coverLen);
5421 // The hole: another Xtru (rounded corners approximated with segments)
5422 TGeoXtru *forwCoverHole = new TGeoXtru(2);
5423 forwCoverHole->SetName("ITSsuppForwCoverHole");
5425 CreateTrayACoverHolesShape(kForwardCoverHoleWide, kForwardCoverHoleLen,
5426 kForwardCoverHoleR10 , xprof, yprof);
5428 // And now the actual Xtru
5429 forwCoverHole->DefinePolygon(16, xprof, yprof);
5430 forwCoverHole->DefineSection(0, 0);
5431 forwCoverHole->DefineSection(1, kForwardCoverTotalThick-kForwardCoverInternThick);
5433 // Now the proper rototranslation matrices for the two holes
5434 yloc = kForwardCoverTotalThick-kForwardCoverInternThick-0.01;//Precision fix
5435 zloc = kForwardCoverHoleZTrans;
5436 TGeoCombiTrans *mf1 = new TGeoCombiTrans(0, yloc, zloc,
5437 new TGeoRotation("", 0, 90, 0) );
5438 mf1->SetName("mf1");
5439 mf1->RegisterYourself();
5441 zloc = coverLen - kForwardCoverHoleZTrans - kForwardCoverHoleLen;
5442 TGeoCombiTrans *mf2 = new TGeoCombiTrans(0, yloc, zloc,
5443 new TGeoRotation("", 0, 90, 0) );
5444 mf2->SetName("mf2");
5445 mf2->RegisterYourself();
5447 // Finally the actual cover shape
5448 TGeoCompositeShape *cover = new TGeoCompositeShape("ITSsuppForwardCoverMain",
5449 "ITSsuppForwCoverMain-ITSsuppForwCoverHole:mf1-ITSsuppForwCoverHole:mf2");
5454 //______________________________________________________________________
5455 TGeoCompositeShape* AliITSv11GeometrySupport::CreateTrayAExternalCover(const Double_t coverLen){
5457 // Creates the external cover of the SDD and SSD cable trays on Side A
5461 // coverLen: the total length of the cover
5465 // Return: a TGeoCompositeShape for the cover
5467 // Created: 03 Jan 2010 Mario Sitta
5469 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
5470 // drawings and other (oral) information given by F.Tosello
5473 // Dimensions and positions of the A-Side Cable Tray External Cover
5475 const Double_t kExternalCoverWide = 130.00 *fgkmm;
5476 const Double_t kExternalCoverSideWide = 10.00 *fgkmm;
5477 const Double_t kExternalCoverHoleLen1 = 262.00 *fgkmm;
5478 const Double_t kExternalCoverHoleLen2 = 280.00 *fgkmm;
5479 const Double_t kExternalCoverHoleLen3 = 205.00 *fgkmm;
5480 const Double_t kExternalCoverHoleLen4 = 55.00 *fgkmm;
5481 const Double_t kExternalCoverHoleWide = 90.00 *fgkmm;
5482 const Double_t kExternalCoverHoleR10 = 10.00 *fgkmm;
5483 const Double_t kExternalCoverTotalThick = 5.00 *fgkmm;
5484 const Double_t kExternalCoverSideThick = 3.00 *fgkmm;
5485 const Double_t kExternalCoverInternThick = 2.00 *fgkmm;
5487 const Double_t kExternalCoverHole1ZTrans = 28.00 *fgkmm;
5488 const Double_t kExternalCoverHolesZTrans = 20.00 *fgkmm;
5492 Double_t xprof[16], yprof[16];
5493 Double_t yloc, zloc;
5496 // The main shape: a Xtru
5497 TGeoXtru *externCoverMain = new TGeoXtru(2);
5498 externCoverMain->SetName("ITSsuppExternCoverMain");
5500 xprof[0] = kExternalCoverWide/2;
5501 yprof[0] = kExternalCoverTotalThick;
5502 xprof[1] = xprof[0];
5503 yprof[1] = yprof[0] - kExternalCoverSideThick;
5504 xprof[2] = xprof[1] - kExternalCoverSideWide;
5505 yprof[2] = yprof[1];
5506 xprof[3] = xprof[2];
5509 // We did the right side, now reflex on the left side
5510 for (Int_t jp = 0; jp < 4; jp++) {
5511 xprof[4+jp] = -xprof[3-jp];
5512 yprof[4+jp] = yprof[3-jp];
5515 // And now the actual Xtru
5516 externCoverMain->DefinePolygon(8, xprof, yprof);
5517 externCoverMain->DefineSection(0, 0);
5518 externCoverMain->DefineSection(1, coverLen);
5520 // The first hole: a Xtru (rounded corners approximated with segments)
5521 Double_t holethick = kExternalCoverTotalThick-kExternalCoverInternThick;
5523 TGeoXtru *extCoverHole1 = new TGeoXtru(2);
5524 extCoverHole1->SetName("ITSsuppExtCoverHole1");
5526 CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen1,
5527 kExternalCoverHoleR10 , xprof, yprof);
5529 extCoverHole1->DefinePolygon(16, xprof, yprof);
5530 extCoverHole1->DefineSection(0, 0);
5531 extCoverHole1->DefineSection(1, holethick);
5533 // The second (and third) hole: another Xtru
5534 TGeoXtru *extCoverHole2 = new TGeoXtru(2);
5535 extCoverHole2->SetName("ITSsuppExtCoverHole2");
5537 CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen2,
5538 kExternalCoverHoleR10 , xprof, yprof);
5540 extCoverHole2->DefinePolygon(16, xprof, yprof);
5541 extCoverHole2->DefineSection(0, 0);
5542 extCoverHole2->DefineSection(1, holethick);
5544 // The fourth hole: another Xtru
5545 TGeoXtru *extCoverHole3 = new TGeoXtru(2);
5546 extCoverHole3->SetName("ITSsuppExtCoverHole3");
5548 CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen3,
5549 kExternalCoverHoleR10 , xprof, yprof);
5551 extCoverHole3->DefinePolygon(16, xprof, yprof);
5552 extCoverHole3->DefineSection(0, 0);
5553 extCoverHole3->DefineSection(1, holethick);
5555 // The fifth and last hole: another Xtru
5556 TGeoXtru *extCoverHole4 = new TGeoXtru(2);
5557 extCoverHole4->SetName("ITSsuppExtCoverHole4");
5559 CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen4,
5560 kExternalCoverHoleR10 , xprof, yprof);
5562 extCoverHole4->DefinePolygon(16, xprof, yprof);
5563 extCoverHole4->DefineSection(0, 0);
5564 extCoverHole4->DefineSection(1, holethick);
5566 // Now the proper rototranslation matrices for the holes
5567 yloc = kExternalCoverTotalThick - kExternalCoverInternThick-0.01;
5568 zloc = kExternalCoverHole1ZTrans;
5569 TGeoCombiTrans *me1 = new TGeoCombiTrans(0, yloc, zloc,
5570 new TGeoRotation("", 0, 90, 0) );
5571 me1->SetName("me1");
5572 me1->RegisterYourself();
5574 zloc += (kExternalCoverHoleLen1 + kExternalCoverHolesZTrans);
5575 TGeoCombiTrans *me2 = new TGeoCombiTrans(0, yloc, zloc,
5576 new TGeoRotation("", 0, 90, 0) );
5577 me2->SetName("me2");
5578 me2->RegisterYourself();
5580 zloc += (kExternalCoverHoleLen2 + kExternalCoverHolesZTrans);
5581 TGeoCombiTrans *me3 = new TGeoCombiTrans(0, yloc, zloc,
5582 new TGeoRotation("", 0, 90, 0) );
5583 me3->SetName("me3");
5584 me3->RegisterYourself();
5586 zloc += (kExternalCoverHoleLen2 + kExternalCoverHolesZTrans);
5587 TGeoCombiTrans *me4 = new TGeoCombiTrans(0, yloc, zloc,
5588 new TGeoRotation("", 0, 90, 0) );
5589 me4->SetName("me4");
5590 me4->RegisterYourself();
5592 zloc += (kExternalCoverHoleLen3 + kExternalCoverHolesZTrans);
5593 TGeoCombiTrans *me5 = new TGeoCombiTrans(0, yloc, zloc,
5594 new TGeoRotation("", 0, 90, 0) );
5595 me5->SetName("me5");
5596 me5->RegisterYourself();
5598 // Finally the actual cover shape
5599 TGeoCompositeShape *cover = new TGeoCompositeShape("ITSsuppExternCoverMain",
5600 "ITSsuppExternCoverMain-ITSsuppExtCoverHole1:me1-ITSsuppExtCoverHole2:me2-ITSsuppExtCoverHole2:me3-ITSsuppExtCoverHole3:me4-ITSsuppExtCoverHole4:me5");
5605 //______________________________________________________________________
5606 void AliITSv11GeometrySupport::CreateTrayACoverHolesShape(const Double_t wide,
5607 const Double_t length, const Double_t r10,
5608 Double_t *x, Double_t *y){
5610 // Creates the proper sequence of X and Y coordinates to determine
5611 // the base XTru polygon for the holes in the SDD and SSD tray covers
5612 // (here the rounded corners are approximated with segments)
5615 // wide : the hole wide
5616 // length : the hole length
5617 // r10 : the radius of the rounded corners
5620 // x, y : coordinate vectors [16]
5622 // Created: 03 Jan 2010 Mario Sitta
5624 // Caller must guarantee that x and y have the correct dimensions
5625 // (but being this a private method it's easy to tell)
5628 x[0] = wide/2 - r10;
5630 x[1] = x[0] + r10*SinD(30);
5631 y[1] = y[0] - r10*(1 - CosD(30));
5632 x[2] = x[0] + r10*SinD(60);
5633 y[2] = y[0] - r10*(1 - CosD(60));
5638 x[5] = x[4] - r10*(1 - CosD(30));
5639 y[5] = y[4] - r10*SinD(30);
5640 x[6] = x[4] - r10*(1 - CosD(60));
5641 y[6] = y[4] - r10*SinD(60);
5645 // We did the right side, now reflex on the left side
5646 for (Int_t jp = 0; jp < 8; jp++) {
5654 //______________________________________________________________________
5655 TGeoXtru* AliITSv11GeometrySupport::CreateSDDSSDTraysSideA(
5656 const Double_t trayLen,
5657 const Double_t trayHi){
5659 // Creates parts of the SDD and SSD Trays on Side A which are identical
5660 // (0872/G/D/03, part of 0872/G/D/07, 0872/G/C/11)
5663 // trayLen : the length of the tray part
5664 // trayHi : the height of the tray part
5668 // Return: a TGeoXtru
5670 // Created: 26 Feb 2010 Mario Sitta
5672 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
5673 // drawings and other (oral) information given by F.Tosello
5676 // Dimensions and positions of the A-Side Cable Trays
5677 // (parts of 0872/G/C)
5678 const Double_t kTrayWidth = 130.00 *fgkmm;
5679 const Double_t kTrayWingWidth = 10.00 *fgkmm;
5680 const Double_t kTrayHeightToBend = 20.00 *fgkmm;
5681 const Double_t kTrayThick = 2.00 *fgkmm;
5683 const Double_t kTrayBendAngle = 22.00 *TMath::DegToRad();
5685 const Int_t kTrayNpoints = 16;
5688 Double_t xprof[kTrayNpoints], yprof[kTrayNpoints];
5691 // The tray shape: a Xtru
5692 TGeoXtru *trayPart = new TGeoXtru(2);
5694 xprof[2] = kTrayWidth/2 - kTrayThick;
5695 yprof[2] = trayHi - kTrayThick;
5696 xprof[3] = kTrayWidth/2 - kTrayWingWidth;
5697 yprof[3] = yprof[2];
5698 xprof[4] = xprof[3];
5700 xprof[5] = kTrayWidth/2;
5701 yprof[5] = yprof[4];
5702 xprof[6] = xprof[5];
5703 yprof[6] = kTrayHeightToBend;
5704 xprof[7] = xprof[6] - yprof[6]*TMath::Tan(kTrayBendAngle);
5707 InsidePoint( xprof[5], yprof[5], xprof[6], yprof[6], xprof[7], yprof[7],
5708 -kTrayThick, xprof[1], yprof[1]);
5710 xprof[8] = -xprof[7];
5711 yprof[8] = yprof[7];
5713 InsidePoint( xprof[6], yprof[6], xprof[7], yprof[7], xprof[8], yprof[8],
5714 -kTrayThick, xprof[0], yprof[0]);
5716 // We did the right side, now reflex on the left side
5717 for (Int_t jp = 0; jp < 8; jp++) {
5718 xprof[8+jp] = -xprof[7-jp];
5719 yprof[8+jp] = yprof[7-jp];
5722 // And now the actual Xtru
5723 trayPart->DefinePolygon(kTrayNpoints, xprof, yprof);
5724 trayPart->DefineSection(0, 0);
5725 trayPart->DefineSection(1, trayLen);
5731 //______________________________________________________________________
5732 TGeoVolumeAssembly* AliITSv11GeometrySupport::CreateSDDSSDTraysSideC(
5733 const char *trayName,
5737 // Creates the SDD and SSD Trays on Side C which are supposedly identical
5740 // trayName : the assembly name
5744 // Return: a TGeoVolumeAssembly
5746 // Created: 16 Apr 2010 Mario Sitta
5748 // Technical data are taken from AutoCAD drawings and other (oral)
5749 // information given by F.Tosello
5752 const Double_t kSideCHalfThick = 0.100 *fgkcm;
5753 const Double_t kSideCFoldAngle = 5.000 *TMath::DegToRad();
5755 const Double_t kSideCLength1 = 172.800 *fgkcm;
5756 const Double_t kSideCLength2 = 189.300 *fgkcm;
5757 const Double_t kSideCHalfWide = 6.350 *fgkcm;
5758 const Double_t kSideCHeight1 = 11.800 *fgkcm;
5759 const Double_t kSideCHeight2 = 4.300 *fgkcm;
5760 const Double_t kSideCSideLength1 = 10.800 *fgkcm;
5761 const Double_t kSideCSideLength2 = 63.800 *fgkcm;
5762 const Double_t kSideCSideHeight = 8.800 *fgkcm;
5763 const Int_t kNPointsLowerFace = 6;
5764 const Int_t kNPointsLateralFace = 9;
5766 const Double_t kSideCWingAHalfLen = 5.000 *fgkcm;
5767 const Double_t kSideCWingBHalfLen = 30.500 *fgkcm;
5768 const Double_t kSideCWingCHalfLen = 2.000 *fgkcm;
5769 const Double_t kSideCWingDHalfLen = 48.500 *fgkcm;
5770 const Double_t kSideCWingEHalfLen = 83.000 *fgkcm;
5771 const Double_t kSideCWingsHalfWide = 0.450 *fgkcm;
5773 const Int_t kNPointsCoverFace = 12;
5775 const Double_t kPlateHalfLen = 6.000 *fgkcm;
5776 const Double_t kPlateThick = 0.600 *fgkcm;
5777 const Double_t kPlateHeight = 4.200 *fgkcm;
5778 const Int_t kNPointsPlate = 6;
5780 const Double_t kBarCoolRmax = 0.4 *fgkcm;
5781 const Int_t kNumBarCool = 2;
5782 const Double_t kXShiftBarCool[kNumBarCool] = { 8.7, 13.0 };
5783 const Double_t kYShiftBarCool[kNumBarCool] = { 8.5, 5.0 };
5787 Double_t xprof[12], yprof[12];
5788 Double_t xloc, yloc, zloc, delta, alpharot;
5790 // The single C-Side Cable tray as an assembly
5791 TGeoVolumeAssembly *cableTrayC = new TGeoVolumeAssembly(trayName);
5793 // First create all needed shapes
5795 // The Cable Tray lower face: a Xtru
5796 TGeoXtru *sideCLowerFace = new TGeoXtru(2);
5800 xprof[1] = kSideCLength1;
5802 xprof[2] = xprof[1] + kSideCLength2*TMath::Cos(kSideCFoldAngle);
5803 yprof[2] = yprof[1] + kSideCLength2*TMath::Sin(kSideCFoldAngle);
5804 xprof[3] = xprof[2] - 2*kSideCHalfThick*TMath::Sin(kSideCFoldAngle);
5805 yprof[3] = yprof[2] + 2*kSideCHalfThick*TMath::Cos(kSideCFoldAngle);
5806 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5807 2*kSideCHalfThick , xprof[4], yprof[4]);
5809 yprof[5] = 2*kSideCHalfThick;
5811 sideCLowerFace->DefinePolygon(kNPointsLowerFace, xprof, yprof);
5812 sideCLowerFace->DefineSection(0,-kSideCHalfWide);
5813 sideCLowerFace->DefineSection(1, kSideCHalfWide);
5815 // The Cable Tray lateral face: a Xtru
5816 TGeoXtru *sideCLateralFace = new TGeoXtru(2);
5820 xprof[1] = kSideCLength1;
5822 xprof[2] = xprof[1] + kSideCLength2*TMath::Cos(kSideCFoldAngle);
5823 yprof[2] = yprof[1] + kSideCLength2*TMath::Sin(kSideCFoldAngle);
5824 xprof[3] = xprof[2] - kSideCHeight2*TMath::Sin(kSideCFoldAngle);
5825 yprof[3] = yprof[2] + kSideCHeight2*TMath::Cos(kSideCFoldAngle);
5826 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5827 kSideCHeight2, xprof[4], yprof[4]);
5828 xprof[5] = kSideCSideLength1 + kSideCSideLength2;
5829 yprof[5] = kSideCHeight2;
5830 xprof[6] = xprof[5];
5831 yprof[6] = kSideCSideHeight;
5832 xprof[7] = kSideCSideLength1;
5833 yprof[7] = kSideCHeight1;
5835 yprof[8] = yprof[7];
5837 sideCLateralFace->DefinePolygon(kNPointsLateralFace, xprof, yprof);
5838 sideCLateralFace->DefineSection(0,-kSideCHalfThick);
5839 sideCLateralFace->DefineSection(1, kSideCHalfThick);
5841 // The lateral wings: four BBox's
5842 TGeoBBox *sideCLateralWingA = new TGeoBBox(kSideCWingAHalfLen,
5844 kSideCWingsHalfWide);
5846 TGeoBBox *sideCLateralWingB = new TGeoBBox(kSideCWingBHalfLen,
5848 kSideCWingsHalfWide);
5850 TGeoBBox *sideCLateralWingC = new TGeoBBox(kSideCHalfThick, // With these
5851 kSideCWingCHalfLen, // X,Y avoid
5852 kSideCWingsHalfWide);//rotations
5854 TGeoBBox *sideCLateralWingD = new TGeoBBox(kSideCWingDHalfLen,
5856 kSideCWingsHalfWide);
5858 TGeoBBox *sideCLateralWingE = new TGeoBBox(kSideCWingEHalfLen,
5860 kSideCWingsHalfWide);
5862 // The connecting lower plate: a Xtru
5863 TGeoXtru *sideCLowerPlate = new TGeoXtru(2);
5867 xprof[1] = kPlateHalfLen;
5869 xprof[2] = xprof[1] + kPlateHalfLen*TMath::Cos(kSideCFoldAngle);
5870 yprof[2] = kPlateHalfLen*TMath::Sin(kSideCFoldAngle);
5871 xprof[3] = xprof[2] - kPlateThick*TMath::Sin(kSideCFoldAngle);
5872 yprof[3] = yprof[2] + kPlateThick*TMath::Cos(kSideCFoldAngle);
5873 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5874 kPlateThick, xprof[4], yprof[4]);
5876 yprof[5] = kPlateThick;
5878 sideCLowerPlate->DefinePolygon(kNPointsPlate, xprof, yprof);
5879 Double_t zwide = kSideCHalfWide + 2*kSideCHalfThick;
5880 sideCLowerPlate->DefineSection(0,-zwide);
5881 sideCLowerPlate->DefineSection(1, zwide);
5883 // The connecting side plate: a Xtru
5884 TGeoXtru *sideCLateralPlate = new TGeoXtru(2);
5888 xprof[1] = kPlateHalfLen;
5890 xprof[2] = xprof[1] + kPlateHalfLen*TMath::Cos(kSideCFoldAngle);
5891 yprof[2] = kPlateHalfLen*TMath::Sin(kSideCFoldAngle);
5892 xprof[3] = xprof[2] - kPlateHeight*TMath::Sin(kSideCFoldAngle);
5893 yprof[3] = yprof[2] + kPlateHeight*TMath::Cos(kSideCFoldAngle);
5894 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5895 kPlateHeight, xprof[4], yprof[4]); // Avoid small overlap
5897 yprof[5] = kPlateHeight;
5899 sideCLateralPlate->DefinePolygon(kNPointsPlate, xprof, yprof);
5900 sideCLateralPlate->DefineSection(0,-kPlateThick/2);
5901 sideCLateralPlate->DefineSection(1, kPlateThick/2);
5903 // The bar fixing the cooling tubes: a Tube
5904 TGeoTube *coolBar = new TGeoTube(0., kBarCoolRmax, kSideCHalfWide);
5906 // The Cable Tray cover: a (complex) Xtru
5907 TGeoXtru *sideCCoverFace = new TGeoXtru(2);
5909 xprof[ 0] = sideCLateralFace->GetX(8);
5910 yprof[ 0] = sideCLateralFace->GetY(8);
5911 xprof[ 1] = sideCLateralFace->GetX(7);
5912 yprof[ 1] = sideCLateralFace->GetY(7);
5913 xprof[ 2] = sideCLateralFace->GetX(6);
5914 yprof[ 2] = sideCLateralFace->GetY(6);
5915 xprof[ 3] = sideCLateralFace->GetX(5);
5916 yprof[ 3] = sideCLateralFace->GetY(5);
5917 xprof[ 4] = sideCLateralFace->GetX(4);
5918 yprof[ 4] = sideCLateralFace->GetY(4);
5920 xloc = (kSideCLength1 + (kSideCSideLength1+kSideCSideLength2))/2;
5921 delta = kSideCLength1 - (xloc + kSideCWingDHalfLen);
5922 xprof[ 5] = xprof[4]
5923 + (delta + 2*kSideCWingEHalfLen)*TMath::Cos(kSideCFoldAngle);
5924 yprof[ 5] = yprof[4]
5925 + (delta + 2*kSideCWingEHalfLen)*TMath::Sin(kSideCFoldAngle);
5927 xprof[ 6] = xprof[5] - 2*kSideCHalfThick*TMath::Sin(kSideCFoldAngle);
5928 yprof[ 6] = yprof[5] + 2*kSideCHalfThick*TMath::Cos(kSideCFoldAngle);
5929 InsidePoint(xprof[3], yprof[3], xprof[4], yprof[4], xprof[5], yprof[5],
5930 2*kSideCHalfThick, xprof[7], yprof[7]);
5931 InsidePoint(xprof[2], yprof[2], xprof[3], yprof[3], xprof[4], yprof[4],
5932 2*kSideCHalfThick, xprof[8], yprof[8]);
5933 xprof[ 9] = xprof[2] + 2*kSideCHalfThick;
5934 yprof[ 9] = yprof[2] + 2*kSideCHalfThick;
5935 xprof[10] = xprof[1];
5936 yprof[10] = yprof[1] + 2*kSideCHalfThick;
5937 xprof[11] = xprof[0];
5938 yprof[11] = yprof[0] + 2*kSideCHalfThick;
5940 sideCCoverFace->DefinePolygon(kNPointsCoverFace, xprof, yprof);
5941 zloc = kSideCHalfWide + 2*kSideCHalfThick + 2*kSideCWingsHalfWide;
5942 sideCCoverFace->DefineSection(0,-zloc);
5943 sideCCoverFace->DefineSection(1, zloc);
5946 // We have all shapes: now create the real volumes
5947 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
5949 TGeoVolume *traySideCLowerFace = new TGeoVolume("ITSsuppTraySideCLower",
5950 sideCLowerFace, medAl);
5952 traySideCLowerFace->SetVisibility(kTRUE);
5953 traySideCLowerFace->SetLineColor(6); // Purple
5954 traySideCLowerFace->SetLineWidth(1);
5955 traySideCLowerFace->SetFillColor(traySideCLowerFace->GetLineColor());
5956 traySideCLowerFace->SetFillStyle(4000); // 0% transparent
5958 TGeoVolume *traySideCLateralFace = new TGeoVolume("ITSsuppTraySideCLateral",
5959 sideCLateralFace, medAl);
5961 traySideCLateralFace->SetVisibility(kTRUE);
5962 traySideCLateralFace->SetLineColor(6); // Purple
5963 traySideCLateralFace->SetLineWidth(1);
5964 traySideCLateralFace->SetFillColor(traySideCLateralFace->GetLineColor());
5965 traySideCLateralFace->SetFillStyle(4000); // 0% transparent
5967 TGeoVolume *traySideCLateralWingA =
5968 new TGeoVolume("ITSsuppTraySideCLateralWingA", sideCLateralWingA, medAl);
5970 traySideCLateralWingA->SetVisibility(kTRUE);
5971 traySideCLateralWingA->SetLineColor(6); // Purple
5972 traySideCLateralWingA->SetLineWidth(1);
5973 traySideCLateralWingA->SetFillColor(traySideCLateralWingA->GetLineColor());
5974 traySideCLateralWingA->SetFillStyle(4000); // 0% transparent
5976 TGeoVolume *traySideCLateralWingB =
5977 new TGeoVolume("ITSsuppTraySideCLateralWingB", sideCLateralWingB, medAl);
5979 traySideCLateralWingB->SetVisibility(kTRUE);
5980 traySideCLateralWingB->SetLineColor(6); // Purple
5981 traySideCLateralWingB->SetLineWidth(1);
5982 traySideCLateralWingB->SetFillColor(traySideCLateralWingB->GetLineColor());
5983 traySideCLateralWingB->SetFillStyle(4000); // 0% transparent
5985 TGeoVolume *traySideCLateralWingC =
5986 new TGeoVolume("ITSsuppTraySideCLateralWingC", sideCLateralWingC, medAl);
5988 traySideCLateralWingC->SetVisibility(kTRUE);
5989 traySideCLateralWingC->SetLineColor(6); // Purple
5990 traySideCLateralWingC->SetLineWidth(1);
5991 traySideCLateralWingC->SetFillColor(traySideCLateralWingC->GetLineColor());
5992 traySideCLateralWingC->SetFillStyle(4000); // 0% transparent
5994 TGeoVolume *traySideCLateralWingD =
5995 new TGeoVolume("ITSsuppTraySideCLateralWingD", sideCLateralWingD, medAl);
5997 traySideCLateralWingD->SetVisibility(kTRUE);
5998 traySideCLateralWingD->SetLineColor(6); // Purple
5999 traySideCLateralWingD->SetLineWidth(1);
6000 traySideCLateralWingD->SetFillColor(traySideCLateralWingD->GetLineColor());
6001 traySideCLateralWingD->SetFillStyle(4000); // 0% transparent
6003 TGeoVolume *traySideCLateralWingE =
6004 new TGeoVolume("ITSsuppTraySideCLateralWingE", sideCLateralWingE, medAl);
6006 traySideCLateralWingE->SetVisibility(kTRUE);
6007 traySideCLateralWingE->SetLineColor(6); // Purple
6008 traySideCLateralWingE->SetLineWidth(1);
6009 traySideCLateralWingE->SetFillColor(traySideCLateralWingE->GetLineColor());
6010 traySideCLateralWingE->SetFillStyle(4000); // 0% transparent
6012 TGeoVolume *traySideCLowerPlate =
6013 new TGeoVolume("ITSsuppTraySideCLowerPlate", sideCLowerPlate, medAl);
6015 traySideCLowerPlate->SetVisibility(kTRUE);
6016 traySideCLowerPlate->SetLineColor(6); // Purple
6017 traySideCLowerPlate->SetLineWidth(1);
6018 traySideCLowerPlate->SetFillColor(traySideCLowerPlate->GetLineColor());
6019 traySideCLowerPlate->SetFillStyle(4000); // 0% transparent
6021 TGeoVolume *traySideCLateralPlate =
6022 new TGeoVolume("ITSsuppTraySideCLateralPlate", sideCLateralPlate, medAl);
6024 traySideCLateralPlate->SetVisibility(kTRUE);
6025 traySideCLateralPlate->SetLineColor(6); // Purple
6026 traySideCLateralPlate->SetLineWidth(1);
6027 traySideCLateralPlate->SetFillColor(traySideCLateralPlate->GetLineColor());
6028 traySideCLateralPlate->SetFillStyle(4000); // 0% transparent
6030 TGeoVolume *traySideCCoverFace =
6031 new TGeoVolume("ITSsuppTraySideCCoverFace", sideCCoverFace, medAl);
6033 traySideCCoverFace->SetVisibility(kTRUE);
6034 traySideCCoverFace->SetLineColor(6); // Purple
6035 traySideCCoverFace->SetLineWidth(1);
6036 traySideCCoverFace->SetFillColor(traySideCCoverFace->GetLineColor());
6037 traySideCCoverFace->SetFillStyle(4000); // 0% transparent
6039 TGeoVolume *coolingTubeBar = new TGeoVolume("ITSsuppTraySideCCoolBar",
6042 coolingTubeBar->SetVisibility(kTRUE);
6043 coolingTubeBar->SetLineColor(6); // Purple
6044 coolingTubeBar->SetLineWidth(1);
6045 coolingTubeBar->SetFillColor(coolingTubeBar->GetLineColor());
6046 coolingTubeBar->SetFillStyle(4000); // 0% transparent
6049 // Now build up the tray
6050 cableTrayC->AddNode(traySideCLowerFace,1,0);
6052 zloc = kSideCHalfWide + kSideCHalfThick;
6053 cableTrayC->AddNode(traySideCLateralFace,1,
6054 new TGeoTranslation(0., 0., zloc) );
6055 cableTrayC->AddNode(traySideCLateralFace,2,
6056 new TGeoTranslation(0., 0.,-zloc) );
6058 xloc = kSideCWingAHalfLen;
6059 yloc = kSideCHeight1 - kSideCHalfThick;
6060 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6061 cableTrayC->AddNode(traySideCLateralWingA,1,
6062 new TGeoTranslation(xloc, yloc, zloc) );
6063 cableTrayC->AddNode(traySideCLateralWingA,2,
6064 new TGeoTranslation(xloc, yloc,-zloc) );
6066 xloc = kSideCSideLength1 + kSideCSideLength2/2;
6067 yloc = Yfrom2Points(kSideCSideLength1,kSideCHeight1,
6068 kSideCSideLength1+kSideCSideLength2,kSideCSideHeight,
6069 xloc) - kSideCHalfThick -0.0012; // Avoid small overlap
6070 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6071 alpharot = (-(kSideCHeight1 - kSideCSideHeight)/kSideCSideLength2 )*
6073 cableTrayC->AddNode(traySideCLateralWingB,1,
6074 new TGeoCombiTrans(xloc, yloc, zloc,
6075 new TGeoRotation("",alpharot,0,0) ) );
6076 cableTrayC->AddNode(traySideCLateralWingB,2,
6077 new TGeoCombiTrans(xloc, yloc,-zloc,
6078 new TGeoRotation("",alpharot,0,0) ) );
6080 xloc = kSideCSideLength1 + kSideCSideLength2 - kSideCHalfThick;
6081 yloc = kSideCSideHeight - kSideCWingCHalfLen;
6082 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6083 cableTrayC->AddNode(traySideCLateralWingC,1,
6084 new TGeoTranslation(xloc, yloc, zloc) );
6085 cableTrayC->AddNode(traySideCLateralWingC,2,
6086 new TGeoTranslation(xloc, yloc,-zloc) );
6088 xloc = (kSideCLength1 + (kSideCSideLength1+kSideCSideLength2))/2;
6089 yloc = kSideCHeight2 - kSideCHalfThick;
6090 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6091 cableTrayC->AddNode(traySideCLateralWingD,1,
6092 new TGeoTranslation(xloc, yloc, zloc) );
6093 cableTrayC->AddNode(traySideCLateralWingD,2,
6094 new TGeoTranslation(xloc, yloc,-zloc) );
6096 delta = kSideCLength1 - (xloc + kSideCWingDHalfLen);
6097 xloc = kSideCLength1 + delta + kSideCWingEHalfLen;
6098 yloc = (xloc - kSideCLength1)*TMath::Tan(kSideCFoldAngle) +
6099 kSideCHeight2*TMath::Cos(kSideCFoldAngle) - kSideCHalfThick;
6100 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6101 alpharot = kSideCFoldAngle*TMath::RadToDeg();
6102 cableTrayC->AddNode(traySideCLateralWingE,1,
6103 new TGeoCombiTrans(xloc, yloc, zloc,
6104 new TGeoRotation("",alpharot,0,0) ) );
6105 cableTrayC->AddNode(traySideCLateralWingE,2,
6106 new TGeoCombiTrans(xloc, yloc,-zloc,
6107 new TGeoRotation("",alpharot,0,0) ) );
6109 xloc = kSideCLength1 - kPlateHalfLen;
6110 yloc = -kPlateThick -0.0025; // Avoid small overlap
6111 cableTrayC->AddNode(traySideCLowerPlate,1,
6112 new TGeoTranslation(xloc, yloc, 0.) );
6114 xloc = kSideCLength1 - kPlateHalfLen;
6115 yloc = -kPlateThick;
6116 zloc = kSideCHalfWide + 2*kSideCHalfThick + kPlateThick/2;
6117 cableTrayC->AddNode(traySideCLateralPlate,1,
6118 new TGeoTranslation(xloc, yloc, zloc) );
6119 cableTrayC->AddNode(traySideCLateralPlate,2,
6120 new TGeoTranslation(xloc, yloc,-zloc) );
6122 for (Int_t jc = 0; jc <kNumBarCool; jc++) {
6123 xloc = kXShiftBarCool[jc];
6124 yloc = kYShiftBarCool[jc];
6125 cableTrayC->AddNode(coolingTubeBar,jc+1,
6126 new TGeoTranslation(xloc, yloc, 0.) );
6129 cableTrayC->AddNode(traySideCCoverFace,1,0);
6132 // Finally return what we made up