1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
16 // This class Defines the Geometry for the ITS services and support cones
17 // outside of the ceneteral volume (except for the Ceneteral support
18 // cylinders. Other classes define the rest of the ITS. Specificaly the ITS
19 // The SSD support cone,SSD Support centeral cylinder, SDD support cone,
20 // The SDD cupport centeral cylinder, the SPD Thermal Sheald, The supports
21 // and cable trays on both the RB26 (muon dump) and RB24 sides, and all of
22 // the cabling from the ladders/stave ends out past the TPC.
25 // General Root includes
27 // Root Geometry includes
29 #include <TGeoManager.h>
30 #include <TGeoVolume.h>
33 #include <TGeoTube.h> // contaings TGeoTubeSeg
36 #include <TGeoCompositeShape.h>
37 #include <TGeoMatrix.h>
38 #include "AliITSv11GeometrySupport.h"
40 ClassImp(AliITSv11GeometrySupport)
44 //______________________________________________________________________
45 void AliITSv11GeometrySupport::SPDCone(TGeoVolume *moth,TGeoManager *mgr)
48 // Creates the SPD thermal shield as a volume assembly
49 // and adds it to the mother volume
50 // (this is actually a merge of the previous SPDThermalSheald method
51 // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06 and the
52 // CreateSPDThermalShield method of AliITSv11Hybrid)
55 // moth : the TGeoVolume owing the volume structure
56 // mgr : the GeoManager (default gGeoManager)
60 // Updated: 11 Dec 2007 Mario Sitta
62 // Technical data are taken from: ALICE-Thermal Screen "Cone transition"
63 // (thermal-screen1_a3.ps), "Cylinder" (thermal-screen2_a3.ps), "Half
64 // assembly" (thermal-screen3_a3.ps), "Flange" (thermal-screen4_a3.ps)
67 // Dimensions of the Central shield
68 const Double_t kHalfLengthCentral = 400.*fgkmm;
69 const Double_t kThicknessCentral = 0.4*fgkmm;
70 const Double_t kInnerRadiusCentral = 8.1475*fgkcm;
71 const Double_t kOuterRadiusCentral = 9.9255*fgkcm;
72 const Double_t kInnerACentral = 3.1674*fgkcm;
73 const Double_t kInnerBCentral = 2.023 *fgkcm;
74 const Double_t kOuterACentral = 2.4374*fgkcm;
75 const Double_t kOuterBCentral = 3.8162*fgkcm;
76 // Dimensions of the EndCap shield
77 const Double_t kHalfLengthEndCap = 25.*fgkmm;
78 const Double_t kThicknessEndCap = 2.0*fgkmm;
79 const Double_t kInnerRadiusEndCap = 8.0775*fgkcm;
80 const Double_t kOuterRadiusEndCap = 9.9955*fgkcm;
81 const Double_t kInnerAEndCap = 3.1453*fgkcm;
82 const Double_t kInnerBEndCap = 2.0009*fgkcm;
83 const Double_t kOuterAEndCap = 2.4596*fgkcm;
84 const Double_t kOuterBEndCap = 3.8384*fgkcm;
85 // Dimensions of the Cone shield
86 const Double_t kHalfLengthCone = 145.*fgkmm;
87 const Double_t kThicknessCone = 0.3*fgkmm;
88 const Double_t kInnerRadialCone = 37.3*fgkcm;
89 const Double_t kOuterRadialCone = 39.0*fgkcm;
90 const Double_t kInnerACone = 14.2344*fgkcm;
91 // const Double_t kInnerBCone = 9.0915*fgkcm;
92 const Double_t kOuterACone = 9.5058*fgkcm;
93 // const Double_t kOuterBCone = 14.8831*fgkcm;
94 // Dimensions of the Flange's Ring and Wing
95 const Double_t kHalfLengthRing = 7.5*fgkmm;
96 const Double_t kThicknessRing = 0.3*fgkmm;
97 const Double_t kInnerRadiusRing = 37.3*fgkcm;
98 const Double_t kOuterRadiusRing = 42.0*fgkcm;
99 const Double_t kOuterRadiusWing = 49.25*fgkcm;
100 const Double_t kWideWing = 6.0*fgkcm;
101 const Double_t kThetaWing = 45.0;
103 const Double_t kTheta = 36.0*TMath::DegToRad();
104 const Double_t kThicknessOmega = 0.3*fgkmm;
108 Double_t xshld[24], yshld[24];
109 Double_t xair[24] , yair[24];
110 Double_t xomega[48], yomega[48];
113 // The entire shield is made up of two half central shields
114 // symmetric with respect to the XZ plane, four half end cap
115 // shields, again symmetric with respect to the XZ plane, and four
116 // half cones, symmetric with respect to the XZ plane too.
118 TGeoVolumeAssembly *vM = new TGeoVolumeAssembly("ITSspdThermalShield");
120 // The central half shield: a half tube of carbon fiber,
121 // a similar but proportionally smaller half tube of air inside it,
122 // and a Omega-shaped carbon fiber insert inside the air.
123 // They are all XTru shapes
125 TGeoXtru *centralshape = new TGeoXtru(2);
127 CreateSPDThermalShape(kInnerACentral,kInnerBCentral,kInnerRadiusCentral,
128 kOuterACentral,kOuterBCentral,kOuterRadiusCentral,
131 centralshape->DefinePolygon(24,xshld,yshld);
132 centralshape->DefineSection(0,-kHalfLengthCentral);
133 centralshape->DefineSection(1, kHalfLengthCentral);
135 // Now rescale to get the air volume dimensions
136 InsidePoint(xshld[23], yshld[23],
137 xshld[ 0], yshld[ 0],
138 xshld[ 1], yshld[ 1], kThicknessCentral,
140 for (Int_t i=1; i<23; i++) {
141 InsidePoint(xshld[i-1], yshld[i-1],
142 xshld[ i ], yshld[ i ],
143 xshld[i+1], yshld[i+1], kThicknessCentral,
146 InsidePoint(xshld[22], yshld[22],
147 xshld[23], yshld[23],
148 xshld[ 0], yshld[ 0], kThicknessCentral,
151 // Create the air shape
152 TGeoXtru *centralairshape = new TGeoXtru(2);
154 centralairshape->DefinePolygon(24,xair,yair);
155 centralairshape->DefineSection(0,-kHalfLengthCentral);
156 centralairshape->DefineSection(1, kHalfLengthCentral);
158 // Create the Omega insert
159 TGeoXtru *centralomegashape = new TGeoXtru(2);
161 CreateSPDOmegaShape(xair,yair,kThicknessOmega,xomega,yomega);
163 centralomegashape->DefinePolygon(48,xomega,yomega);
164 centralomegashape->DefineSection(0,-kHalfLengthCentral);
165 centralomegashape->DefineSection(1, kHalfLengthCentral);
167 // The end cap half shield: a half tube of carbon fiber,
168 // a similar but proportionally smaller half tube of air inside it,
169 // and a Omega-shaped carbon fiber insert inside the air.
170 // They are all XTru shapes
172 TGeoXtru *endcapshape = new TGeoXtru(2);
174 CreateSPDThermalShape(kInnerAEndCap,kInnerBEndCap,kInnerRadiusEndCap,
175 kOuterAEndCap,kOuterBEndCap,kOuterRadiusEndCap,
178 endcapshape->DefinePolygon(24,xshld,yshld);
179 endcapshape->DefineSection(0,-kHalfLengthEndCap);
180 endcapshape->DefineSection(1, kHalfLengthEndCap);
182 // Now rescale to get the air volume dimensions
183 InsidePoint(xshld[23], yshld[23],
184 xshld[ 0], yshld[ 0],
185 xshld[ 1], yshld[ 1], kThicknessEndCap,
187 for (Int_t i=1; i<23; i++) {
188 InsidePoint(xshld[i-1], yshld[i-1],
189 xshld[ i ], yshld[ i ],
190 xshld[i+1], yshld[i+1], kThicknessEndCap,
193 InsidePoint(xshld[22], yshld[22],
194 xshld[23], yshld[23],
195 xshld[ 0], yshld[ 0], kThicknessEndCap,
198 // Create the air shape
199 TGeoXtru *endcapairshape = new TGeoXtru(2);
201 endcapairshape->DefinePolygon(24,xair,yair);
202 endcapairshape->DefineSection(0,-kHalfLengthEndCap);
203 endcapairshape->DefineSection(1, kHalfLengthEndCap);
205 // Create the Omega insert
206 TGeoXtru *endcapomegashape = new TGeoXtru(2);
208 CreateSPDOmegaShape(xair,yair,kThicknessOmega,xomega,yomega);
210 endcapomegashape->DefinePolygon(48,xomega,yomega);
211 endcapomegashape->DefineSection(0,-kHalfLengthEndCap);
212 endcapomegashape->DefineSection(1, kHalfLengthEndCap);
214 // The cone half shield is more complex since there is no basic
215 // TGeo shape to describe it correctly. So it is made of a series
216 // of TGeoArb8 shapes filled with air, which all together make up the
217 // the cone AND its internal insert. Part of the following code is
218 // adapted from SPDThermalSheald method.
221 TGeoArb8 *sC1 = new TGeoArb8(kHalfLengthCone);
222 TGeoArb8 *sC2 = new TGeoArb8(kHalfLengthCone);
224 CreateSPDThermalShape(kInnerACentral,kInnerBCentral,kInnerRadiusCentral,
225 kOuterACentral,kOuterBCentral,kOuterRadiusCentral,
228 sC1->SetVertex(0,xshld[12],yshld[12]);
229 sC1->SetVertex(1,xshld[11],yshld[11]);
230 sC1->SetVertex(2,xshld[ 0],yshld[ 0]);
231 sC1->SetVertex(3,xshld[23],yshld[23]);
233 sC2->SetVertex(0,xshld[11],yshld[11]);
234 sC2->SetVertex(1,xshld[10],yshld[10]);
235 sC2->SetVertex(2,xshld[ 1],yshld[ 1]);
236 sC2->SetVertex(3,xshld[ 0],yshld[ 0]);
238 // Drawings give only the radius, convert it to the apothegm
239 Double_t kInnerRadiusCone = TMath::Sqrt(kInnerRadialCone*kInnerRadialCone
240 - 0.25*kInnerACone*kInnerACone);
241 Double_t kOuterRadiusCone = TMath::Sqrt(kOuterRadialCone*kOuterRadialCone
242 - 0.25*kOuterACone*kOuterACone);
244 Double_t xco[4], yco[4], xci[4], yci[4];
246 for (Int_t i=0; i<2; i++) {
247 Double_t th = i*kTheta*TMath::RadToDeg();
248 xco[2*i ] = kOuterRadiusCone*SinD(th) - 0.5*kOuterACone*CosD(th);
249 yco[2*i ] = kOuterRadiusCone*CosD(th) + 0.5*kOuterACone*SinD(th);
250 xci[2*i ] = kInnerRadiusCone*SinD(th) - 0.5*kInnerACone*CosD(th);
251 yci[2*i ] = kInnerRadiusCone*CosD(th) + 0.5*kInnerACone*SinD(th);
252 xco[2*i+1] = kOuterRadiusCone*SinD(th) + 0.5*kOuterACone*CosD(th);
253 yco[2*i+1] = kOuterRadiusCone*CosD(th) - 0.5*kOuterACone*SinD(th);
254 xci[2*i+1] = kInnerRadiusCone*SinD(th) + 0.5*kInnerACone*CosD(th);
255 yci[2*i+1] = kInnerRadiusCone*CosD(th) - 0.5*kInnerACone*SinD(th);
258 sC1->SetVertex(4,xco[0],yco[0]);
259 sC1->SetVertex(5,xco[1],yco[1]);
260 sC1->SetVertex(6,xci[1],yci[1]);
261 sC1->SetVertex(7,xci[0],yci[0]);
263 sC2->SetVertex(4,xco[1],yco[1]);
264 sC2->SetVertex(5,xco[2],yco[2]);
265 sC2->SetVertex(6,xci[2],yci[2]);
266 sC2->SetVertex(7,xci[1],yci[1]);
269 TGeoArb8 *sCh1 = new TGeoArb8(kHalfLengthCone);
270 TGeoArb8 *sCh2 = new TGeoArb8(kHalfLengthCone);
272 for(Int_t i=0; i<4; i++){
273 InsidePoint(sC1->GetVertices()[((i+3)%4)*2+0],
274 sC1->GetVertices()[((i+3)%4)*2+1],
275 sC1->GetVertices()[i*2+0],
276 sC1->GetVertices()[i*2+1],
277 sC1->GetVertices()[((i+1)%4)*2+0],
278 sC1->GetVertices()[((i+1)%4)*2+1],-kThicknessCone,x,y);
279 sCh1->SetVertex(i,x,y);
281 InsidePoint(sC1->GetVertices()[((i+3)%4 +4)*2+0],
282 sC1->GetVertices()[((i+3)%4 +4)*2+1],
283 sC1->GetVertices()[(i+4)*2+0],
284 sC1->GetVertices()[(i+4)*2+1],
285 sC1->GetVertices()[((i+1)%4 +4)*2+0],
286 sC1->GetVertices()[((i+1)%4 +4)*2+1],-kThicknessCone,x,y);
287 sCh1->SetVertex(i+4,x,y);
289 InsidePoint(sC2->GetVertices()[((i+3)%4)*2+0],
290 sC2->GetVertices()[((i+3)%4)*2+1],
291 sC2->GetVertices()[i*2+0],
292 sC2->GetVertices()[i*2+1],
293 sC2->GetVertices()[((i+1)%4)*2+0],
294 sC2->GetVertices()[((i+1)%4)*2+1],-kThicknessCone,x,y);
295 sCh2->SetVertex(i,x,y);
297 InsidePoint(sC2->GetVertices()[((i+3)%4 +4)*2+0],
298 sC2->GetVertices()[((i+3)%4 +4)*2+1],
299 sC2->GetVertices()[(i+4)*2+0],
300 sC2->GetVertices()[(i+4)*2+1],
301 sC2->GetVertices()[((i+1)%4 +4)*2+0],
302 sC2->GetVertices()[((i+1)%4 +4)*2+1],-kThicknessCone,x,y);
303 sCh2->SetVertex(i+4,x,y);
306 // Finally the carbon fiber Ring with its Wings and their
307 // stesalite inserts. They are Tube and TubeSeg shapes
309 TGeoTube *ringshape = new TGeoTube(kInnerRadiusRing,kOuterRadiusRing,
312 TGeoTube *ringinsertshape = new TGeoTube(kInnerRadiusRing+kThicknessRing,
313 kOuterRadiusRing-kThicknessRing,
314 kHalfLengthRing-kThicknessRing);
316 Double_t angleWideWing, angleWideWingThickness;
317 angleWideWing = (kWideWing/kOuterRadiusWing)*TMath::RadToDeg();
318 angleWideWingThickness = (kThicknessRing/kOuterRadiusWing)*TMath::RadToDeg();
320 TGeoTubeSeg *wingshape = new TGeoTubeSeg(kOuterRadiusRing,kOuterRadiusWing,
321 kHalfLengthRing, 0, angleWideWing);
323 TGeoTubeSeg *winginsertshape = new TGeoTubeSeg(kOuterRadiusRing,
324 kOuterRadiusWing-kThicknessRing, kHalfLengthRing-kThicknessRing,
325 angleWideWingThickness, angleWideWing-angleWideWingThickness);
328 // We have the shapes: now create the real volumes
330 TGeoMedium *medSPDcf = mgr->GetMedium("ITS_SPD shield$");
331 TGeoMedium *medSPDair = mgr->GetMedium("ITS_SPD AIR$");
332 TGeoMedium *medSPDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite
334 TGeoVolume *centralshield = new TGeoVolume("SPDcentralshield",
335 centralshape,medSPDcf);
336 centralshield->SetVisibility(kTRUE);
337 centralshield->SetLineColor(7);
338 centralshield->SetLineWidth(1);
340 TGeoVolume *centralairshield = new TGeoVolume("SPDcentralairshield",
341 centralairshape,medSPDair);
342 centralairshield->SetVisibility(kTRUE);
343 centralairshield->SetLineColor(5); // Yellow
344 centralairshield->SetLineWidth(1);
345 centralairshield->SetFillColor(centralairshield->GetLineColor());
346 centralairshield->SetFillStyle(4090); // 90% transparent
348 TGeoVolume *centralomega = new TGeoVolume("SPDcentralomega",
349 centralomegashape,medSPDcf);
350 centralomega->SetVisibility(kTRUE);
351 centralomega->SetLineColor(7);
352 centralomega->SetLineWidth(1);
354 centralairshield->AddNode(centralomega,1,0);
355 centralshield->AddNode(centralairshield,1,0);
357 TGeoVolume *endcapshield = new TGeoVolume("SPDendcapshield",
358 endcapshape,medSPDcf);
359 endcapshield->SetVisibility(kTRUE);
360 endcapshield->SetLineColor(7);
361 endcapshield->SetLineWidth(1);
363 TGeoVolume *endcapairshield = new TGeoVolume("SPDendcapairshield",
364 endcapairshape,medSPDair);
365 endcapairshield->SetVisibility(kTRUE);
366 endcapairshield->SetLineColor(5); // Yellow
367 endcapairshield->SetLineWidth(1);
368 endcapairshield->SetFillColor(endcapairshield->GetLineColor());
369 endcapairshield->SetFillStyle(4090); // 90% transparent
371 TGeoVolume *endcapomega = new TGeoVolume("SPDendcapomega",
372 endcapomegashape,medSPDcf);
373 endcapomega->SetVisibility(kTRUE);
374 endcapomega->SetLineColor(7);
375 endcapomega->SetLineWidth(1);
377 endcapairshield->AddNode(endcapomega,1,0);
378 endcapshield->AddNode(endcapairshield,1,0);
380 TGeoVolume *vC1 = new TGeoVolume("SPDconeshieldV1",sC1,medSPDcf);
381 vC1->SetVisibility(kTRUE);
382 vC1->SetLineColor(7);
383 vC1->SetLineWidth(1);
385 TGeoVolume *vCh1 = new TGeoVolume("SPDconeshieldH1",sCh1,medSPDair);
387 vCh1->SetVisibility(kTRUE);
388 vCh1->SetLineColor(5); // Yellow
389 vCh1->SetLineWidth(1);
390 vCh1->SetFillColor(vCh1->GetLineColor());
391 vCh1->SetFillStyle(4090); // 90% transparent
393 vC1->AddNode(vCh1,1,0);
395 TGeoVolume *vC2 = new TGeoVolume("SPDconeshieldV2",sC2,medSPDcf);
397 vC2->SetVisibility(kTRUE);
398 vC2->SetLineColor(7);
399 vC2->SetLineWidth(1);
401 TGeoVolume *vCh2 = new TGeoVolume("SPDconeshieldH2",sCh2,medSPDair);
403 vCh2->SetVisibility(kTRUE);
404 vCh2->SetLineColor(5); // Yellow
405 vCh2->SetLineWidth(1);
406 vCh2->SetFillColor(vCh2->GetLineColor());
407 vCh2->SetFillStyle(4090); // 90% transparent
409 vC2->AddNode(vCh2,1,0);
411 TGeoVolume *ring = new TGeoVolume("SPDshieldring",ringshape,medSPDcf);
412 ring->SetVisibility(kTRUE);
413 ring->SetLineColor(7);
414 ring->SetLineWidth(1);
416 TGeoVolume *ringinsert = new TGeoVolume("SPDshieldringinsert",
417 ringinsertshape,medSPDste);
418 ringinsert->SetVisibility(kTRUE);
419 ringinsert->SetLineColor(3); // Green
420 // ringinsert->SetLineWidth(1);
421 ringinsert->SetFillColor(ringinsert->GetLineColor());
422 ringinsert->SetFillStyle(4010); // 10% transparent
424 ring->AddNode(ringinsert,1,0);
426 TGeoVolume *wing = new TGeoVolume("SPDshieldringwing",wingshape,medSPDcf);
427 wing->SetVisibility(kTRUE);
428 wing->SetLineColor(7);
429 wing->SetLineWidth(1);
431 TGeoVolume *winginsert = new TGeoVolume("SPDshieldringinsert",
432 winginsertshape,medSPDste);
433 winginsert->SetVisibility(kTRUE);
434 winginsert->SetLineColor(3); // Green
435 // winginsert->SetLineWidth(1);
436 winginsert->SetFillColor(winginsert->GetLineColor());
437 winginsert->SetFillStyle(4010); // 10% transparent
439 wing->AddNode(winginsert,1,0);
442 // Add all volumes in the assembly
443 vM->AddNode(centralshield,1,0);
444 vM->AddNode(centralshield,2,new TGeoRotation("",180,0,0));
446 vM->AddNode(endcapshield,1,
447 new TGeoTranslation(0,0, kHalfLengthCentral+kHalfLengthEndCap));
448 vM->AddNode(endcapshield,2,
449 new TGeoTranslation(0,0,-kHalfLengthCentral-kHalfLengthEndCap));
450 vM->AddNode(endcapshield,3,new TGeoCombiTrans(
451 0, 0, kHalfLengthCentral+kHalfLengthEndCap,
452 new TGeoRotation("",180,0,0) ) );
453 vM->AddNode(endcapshield,4,new TGeoCombiTrans(
454 0, 0,-kHalfLengthCentral-kHalfLengthEndCap,
455 new TGeoRotation("",180,0,0) ) );
457 for (Int_t i=0; i<10; i++) {
458 Double_t thetaC12 = kTheta*TMath::RadToDeg();
459 vM->AddNode(vC1,2*i+1, new TGeoCombiTrans(
460 0, 0, kHalfLengthCentral+2*kHalfLengthEndCap+kHalfLengthCone,
461 new TGeoRotation("",0, 0,i*thetaC12) ) );
462 vM->AddNode(vC1,2*i+2, new TGeoCombiTrans(
463 0, 0, -kHalfLengthCentral-2*kHalfLengthEndCap-kHalfLengthCone,
464 new TGeoRotation("",0,180,i*thetaC12) ) );
465 vM->AddNode(vC2,2*i+1, new TGeoCombiTrans(
466 0, 0, kHalfLengthCentral+2*kHalfLengthEndCap+kHalfLengthCone,
467 new TGeoRotation("",0, 0,i*thetaC12) ) );
468 vM->AddNode(vC2,2*i+2, new TGeoCombiTrans(
469 0, 0, -kHalfLengthCentral-2*kHalfLengthEndCap-kHalfLengthCone,
470 new TGeoRotation("",0,180,i*thetaC12) ) );
473 vM->AddNode(ring,1,new TGeoTranslation(0, 0,
474 kHalfLengthCentral+2*kHalfLengthEndCap+2*kHalfLengthCone
476 vM->AddNode(ring,2,new TGeoTranslation(0, 0,
477 -kHalfLengthCentral-2*kHalfLengthEndCap-2*kHalfLengthCone
480 for (Int_t i=0; i<4; i++) {
481 Double_t thetaW = kThetaWing*(2*i+1) - angleWideWing/2.;
482 vM->AddNode(wing,2*i+1,new TGeoCombiTrans(0, 0,
483 kHalfLengthCentral+2*kHalfLengthEndCap+2*kHalfLengthCone
484 +kHalfLengthRing, new TGeoRotation("",thetaW,0,0) ));
485 vM->AddNode(wing,2*i+2,new TGeoCombiTrans(0, 0,
486 -kHalfLengthCentral-2*kHalfLengthEndCap-2*kHalfLengthCone
487 -kHalfLengthRing, new TGeoRotation("",thetaW,0,0) ));
490 // Some debugging if requested
496 // Finally put the entire shield in the mother volume
497 moth->AddNode(vM,1,0);
502 //______________________________________________________________________
503 void AliITSv11GeometrySupport::CreateSPDThermalShape(
504 Double_t ina, Double_t inb, Double_t inr,
505 Double_t oua, Double_t oub, Double_t our,
506 Double_t t, Double_t *x , Double_t *y )
509 // Creates the proper sequence of X and Y coordinates to determine
510 // the base XTru polygon for the SPD thermal shapes
513 // ina, inb : inner shape sides
514 // inr : inner radius
515 // oua, oub : outer shape sides
516 // our : outer radius
520 // x, y : coordinate vectors [24]
522 // Created: 14 Nov 2007 Mario Sitta
523 // Updated: 11 Dec 2007 Mario Sitta
525 Double_t xlocal[6],ylocal[6];
527 //Create the first inner quadrant (X > 0)
528 FillSPDXtruShape(ina,inb,inr,t,xlocal,ylocal);
529 for (Int_t i=0; i<6; i++) {
534 // Then reflex on the second quadrant (X < 0)
535 for (Int_t i=0; i<6; i++) {
540 // Now create the first outer quadrant (X > 0)
541 FillSPDXtruShape(oua,oub,our,t,xlocal,ylocal);
542 for (Int_t i=0; i<6; i++) {
547 // Finally reflex on the second quadrant (X < 0)
548 for (Int_t i=0; i<6; i++) {
556 //______________________________________________________________________
557 void AliITSv11GeometrySupport::CreateSPDOmegaShape(
558 Double_t *xin, Double_t *yin, Double_t d,
559 Double_t *x, Double_t *y)
562 // Creates the proper sequence of X and Y coordinates to determine
563 // the SPD Omega XTru polygon
566 // xin, yin : coordinates of the air volume
567 // d : Omega shape thickness
571 // x, y : coordinate vectors [48]
573 // Created: 17 Nov 2007 Mario Sitta
574 // Updated: 11 Dec 2007 Mario Sitta
575 // Updated: 20 Feb 2009 Mario Sitta New algorithm (the old one
576 // gives erroneous vertexes)
579 // This vector contains the index of those points which coincide
580 // with the corresponding points in the air shape
581 Int_t indexAir2Omega[12] = {1, 2, 5, 6, 9, 10, 11, 15, 16, 19, 20, 23};
583 // First fill those vertexes corresponding to
584 // the edges aligned to the air shape edges
585 for (Int_t j=0; j<12; j++) {
586 x[*(indexAir2Omega+j)] = xin[j];
587 y[*(indexAir2Omega+j)] = yin[j];
590 // Now get the coordinates of the first inner point
591 PointFromParallelLines(x[23],y[23],x[1],y[1],d,x[0],y[0]);
593 // Knowing this, the second internal point can be determined
594 InsidePoint(x[0],y[0],x[1],y[1],x[2],y[2],d,x[22],y[22]);
596 // The third point is now computable
597 ReflectPoint(x[1],y[1],x[2],y[2],x[22],y[22],x[21],y[21]);
600 InsidePoint(x[21],y[21],x[20],y[20],x[19],y[19],-d,x[3],y[3]);
602 ReflectPoint(x[20],y[20],x[19],y[19],x[3],y[3],x[4],y[4]);
604 InsidePoint(x[4],y[4],x[5],y[5],x[6],y[6],d,x[18],y[18]);
606 ReflectPoint(x[5],y[5],x[6],y[6],x[18],y[18],x[17],y[17]);
608 InsidePoint(x[17],y[17],x[16],y[16],x[15],y[15],-d,x[7],y[7]);
610 ReflectPoint(x[16],y[16],x[15],y[15],x[7],y[7],x[8],y[8]);
612 InsidePoint(x[8],y[8],x[9],y[9],x[10],y[10],d,x[14],y[14]);
614 // These need to be fixed explicitly
620 // Finally reflect on the negative side
621 for (Int_t i=0; i<24; i++) {
626 // Wow ! We've finished
630 //______________________________________________________________________
631 void AliITSv11GeometrySupport::FillSPDXtruShape(Double_t a, Double_t b,
632 Double_t r, Double_t t,
633 Double_t *x, Double_t *y)
636 // Creates the partial sequence of X and Y coordinates to determine
637 // the lateral part of the SPD thermal shield
640 // a, b : shape sides
645 // x, y : coordinate vectors [6]
647 // Created: 14 Nov 2007 Mario Sitta
652 x[1] = x[0] + b * TMath::Cos(t/2);
653 y[1] = y[0] - b * TMath::Sin(t/2);
655 x[2] = x[1] + a * TMath::Cos(t);
656 y[2] = y[1] - a * TMath::Sin(t);
658 x[3] = x[2] + b * TMath::Cos(3*t/2);
659 y[3] = y[2] - b * TMath::Sin(3*t/2);
661 x[4] = x[3] + a * TMath::Cos(2*t);
662 y[4] = y[3] - a * TMath::Sin(2*t);
670 //______________________________________________________________________
671 void AliITSv11GeometrySupport::PointFromParallelLines(Double_t x1, Double_t y1,
672 Double_t x2, Double_t y2, Double_t d,
673 Double_t &x, Double_t &y)
676 // Determines the X and Y of the first internal point of the Omega shape
677 // (i.e. the coordinates of a point given two parallel lines passing by
678 // two points and placed at a known distance)
681 // x1, y1 : first point
682 // x2, y2 : second point
683 // d : distance between the two lines
686 // x, y : coordinate of the point
688 // Created: 22 Feb 2009 Mario Sitta
692 <img src="ITS/doc/PointFromParallelLines.gif">
696 // The slope of the paralles lines at a distance d
699 // The parameters of the solving equation
700 // a x^2 - 2 b x + c = 0
701 Double_t a = (x1 - x2)*(x1 - x2) - d*d;
702 Double_t b = (x1 - x2)*(y1 - y2);
703 Double_t c = (y1 - y2)*(y1 - y2) - d*d;
705 // (Delta4 is Delta/4 because we use the reduced formula)
706 Double_t Delta4 = b*b - a*c;
708 // Compute the slope of the two parallel lines
709 // (one of the two possible slopes, the one with the smaller
710 // absolute value is needed)
711 if (Delta4 < 0) { // Should never happen with our data, but just to be sure
712 x = -1; // x is expected positive, so this flags an error
715 m = (b + TMath::Sqrt(Delta4))/a; // b is negative with our data
717 // Finally compute the coordinates of the point
718 x = x2 + (y1 - y2 - d)/m;
725 //______________________________________________________________________
726 void AliITSv11GeometrySupport::ReflectPoint(Double_t x1, Double_t y1,
727 Double_t x2, Double_t y2,
728 Double_t x3, Double_t y3,
729 Double_t &x, Double_t &y)
732 // Given two points (x1,y1) and (x2,y2), determines the point (x,y)
733 // lying on the line parallel to the line passing by these points,
734 // at a distance d and passing by the point (x3,y3), which is symmetric to
735 // the third point with respect to the axis of the segment delimited by
736 // the two first points.
739 // x1, y1 : first point
740 // x2, y2 : second point
741 // x3, y3 : third point
742 // d : distance between the two lines
745 // x, y : coordinate of the reflected point
747 // Created: 22 Feb 2009 Mario Sitta
751 <img src="ITS/doc/ReflectPoint.gif">
755 // The slope of the line passing by the first two points
756 Double_t k = (y2 - y1)/(x2 - x1);
758 // The middle point of the segment 1-2
759 Double_t xK = (x1 + x2)/2.;
760 Double_t yK = (y1 + y2)/2.;
762 // The intercept between the axis of the segment 1-2 and the line
763 // passing by 3 and parallel to the line passing by 1-2
764 Double_t xH = (k*k*x3 + k*(yK - y3) + xK)/(k*k + 1);
765 Double_t yH = k*(xH - x3) + y3;
767 // The point symmetric to 3 with respect to H
775 //______________________________________________________________________
776 void AliITSv11GeometrySupport::SDDCone(TGeoVolume *moth,TGeoManager *mgr)
779 // Creates the SDD support cone and cylinder geometry as a
780 // volume assembly and adds it to the mother volume
781 // (part of this code is taken or anyway inspired to SDDCone method
782 // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
785 // moth : the TGeoVolume owing the volume structure
786 // mgr : the GeoManager (default gGeoManager)
789 // Created: ??? Bjorn S. Nilsen
790 // Updated: 18 Feb 2008 Mario Sitta
791 // Updated: 25 Jul 2008 Mario Sitta SDDCarbonFiberCone simpler
792 // Updated: 10 Jun 2010 Mario Sitta Cables across cone holes added
794 // Technical data are taken from: "Supporto Generale Settore SDD"
795 // (technical drawings ALR-0816/1-B), "Supporto Globale Settore SDD"
796 // (technical drawings ALR-0816/2A, ALR-0816/2B, ALR-0816/2C, ALR-0816/2D),
797 // private communication with B. Giraudo
799 // Dimensions of the Central cylinder and flanges
800 const Double_t kCylinderHalfLength = (790.0/2)*fgkmm;
801 const Double_t kCylinderInnerR = (210.0/2)*fgkmm;
802 const Double_t kCylinderOuterR = (231.0/2)*fgkmm;
803 const Double_t kFlangeHalfLength = ( 15.0/2)*fgkmm;
804 const Double_t kFlangeInnerR = (210.5/2)*fgkmm;
805 const Double_t kFlangeOuterR = (230.5/2)*fgkmm;
806 const Double_t kInsertoHalfLength =
807 kCylinderHalfLength - 2*kFlangeHalfLength;
808 // const Double_t kCFThickness = kFlangeInnerR - kCylinderInnerR;
809 const Double_t kBoltDiameter = 6.0*fgkmm; // M6 screw
810 const Double_t kBoltDepth = 6.0*fgkmm; // In the flange
811 const Double_t kBoltRadius = (220.0/2)*fgkmm; // Radius in flange
812 const Double_t kThetaBolt = 30.0*fgkDegree;
813 const Int_t kNBolts = (Int_t)(360.0/kThetaBolt);
814 // Dimensions of the Cone
815 const Double_t kConeROutMin = (540.0/2)*fgkmm;
816 const Double_t kConeROutMax = (560.0/2)*fgkmm;
817 const Double_t kConeRCurv = 10.0*fgkmm; // Radius of curvature
818 const Double_t kConeRinMin = (210.0/2)*fgkmm;
819 // const Double_t kConeRinMax = (216.0/2)*fgkmm;
820 const Double_t kConeRinCylinder = (231.0/2)*fgkmm;
821 const Double_t kConeZCylinder = 192.0*fgkmm;
822 const Double_t kConeZOuterMilled = 23.0*fgkmm;
823 const Double_t kConeDZin = 15.0*fgkmm; // ???
824 const Double_t kConeThickness = 10.0*fgkmm; // Rohacell + Carb.Fib.
825 const Double_t kConeTheta = 45.0*fgkDegree; // SDD cone angle
826 const Double_t kSinConeTheta =
827 TMath::Sin(kConeTheta*TMath::DegToRad());
828 const Double_t kCosConeTheta =
829 TMath::Cos(kConeTheta*TMath::DegToRad());
830 const Double_t kTanConeTheta =
831 TMath::Tan(kConeTheta*TMath::DegToRad());
832 // Dimensions of the Cone Inserts
833 const Double_t kConeCFThickness = 1.5*fgkmm;//Carbon fiber thickness
834 // Dimensions of the Cone Holes
835 const Double_t kHole1RMin = (450.0/2)*fgkmm;
836 const Double_t kHole1RMax = (530.0/2)*fgkmm;
837 const Double_t kHole2RMin = (280.0/2)*fgkmm;
838 const Double_t kHole2RMax = (375.0/2)*fgkmm;
839 const Double_t kHole1Phi = 25.0*fgkDegree;
840 const Double_t kHole2Phi = 50.0*fgkDegree;
841 const Double_t kHole3RMin = 205.0*fgkmm;
842 const Double_t kHole3DeltaR = 15*fgkmm;
843 const Double_t kHole3Width = 30*fgkmm;
844 const Int_t kNHole3 = 6 ;
845 const Double_t kHole4RMin = 116.0*fgkmm;
846 const Double_t kHole4DeltaR = 15*fgkmm;
847 const Double_t kHole4Width = 30*fgkmm;
848 // const Int_t kNHole4 = 3 ;
849 // Fraction of materials in holes
850 const Double_t kHolePlasticFrac = 0.55846;
851 const Double_t kHoleCuFrac = 0.06319;
852 const Double_t kHoleGlassFrac = 0.02652;
855 Double_t x, y, z, t, dza, rmin, rmax;
858 // Recover the needed materials
859 TGeoMedium *medSDDcf = mgr->GetMedium("ITS_SDD C (M55J)$");
860 TGeoMedium *medSDDair = mgr->GetMedium("ITS_SDD AIR$");
861 TGeoMedium *medSDDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite
862 TGeoMedium *medSDDroh = mgr->GetMedium("ITS_ROHACELL$");
863 TGeoMedium *medSDDss = mgr->GetMedium("ITS_INOX$");
864 TGeoMedium *medSDDplast = mgr->GetMedium("ITS_SDDKAPTON (POLYCH2)$");
865 TGeoMedium *medSDDCu = mgr->GetMedium("ITS_COPPER$");
866 TGeoMedium *medSDDglass = mgr->GetMedium("ITS_SDD OPTICFIB$");
868 // First define the geometrical shapes
870 // Central cylinder with its internal foam and the lateral flanges:
871 // a carbon fiber Tube which contains a rohacell Tube and two
873 TGeoTube *cylindershape = new TGeoTube(kCylinderInnerR,kCylinderOuterR,
874 kCylinderHalfLength);
876 TGeoTube *insertoshape = new TGeoTube(kFlangeInnerR,kFlangeOuterR,
879 TGeoTube *flangeshape = new TGeoTube(kFlangeInnerR,kFlangeOuterR,
882 // The flange bolt: it is a Tube
883 TGeoTube *boltshape = new TGeoTube(0.0, 0.5*kBoltDiameter, 0.5*kBoltDepth);
885 // Debug if requested
887 cylindershape->InspectShape();
888 insertoshape->InspectShape();
889 flangeshape->InspectShape();
890 boltshape->InspectShape();
894 // We have the shapes: now create the real volumes
896 TGeoVolume *cfcylinder = new TGeoVolume("SDDCarbonFiberCylinder",
897 cylindershape,medSDDcf);
898 cfcylinder->SetVisibility(kTRUE);
899 cfcylinder->SetLineColor(4); // Blue
900 cfcylinder->SetLineWidth(1);
901 cfcylinder->SetFillColor(cfcylinder->GetLineColor());
902 cfcylinder->SetFillStyle(4000); // 0% transparent
904 TGeoVolume *foamcylinder = new TGeoVolume("SDDFoamCylinder",
905 insertoshape,medSDDroh);
906 foamcylinder->SetVisibility(kTRUE);
907 foamcylinder->SetLineColor(3); // Green
908 foamcylinder->SetLineWidth(1);
909 foamcylinder->SetFillColor(foamcylinder->GetLineColor());
910 foamcylinder->SetFillStyle(4050); // 50% transparent
912 TGeoVolume *flangecylinder = new TGeoVolume("SDDFlangeCylinder",
913 flangeshape,medSDDste);
914 flangecylinder->SetVisibility(kTRUE);
915 flangecylinder->SetLineColor(2); // Red
916 flangecylinder->SetLineWidth(1);
917 flangecylinder->SetFillColor(flangecylinder->GetLineColor());
918 flangecylinder->SetFillStyle(4050); // 50% transparent
920 TGeoVolume *bolt = new TGeoVolume("SDDFlangeBolt",boltshape,medSDDss);
921 bolt->SetVisibility(kTRUE);
922 bolt->SetLineColor(1); // Black
923 bolt->SetLineWidth(1);
924 bolt->SetFillColor(bolt->GetLineColor());
925 bolt->SetFillStyle(4050); // 50% transparent
927 // Mount up the cylinder
928 for(Int_t i=0; i<kNBolts; i++){
930 x = kBoltRadius*CosD(t);
931 y = kBoltRadius*SinD(t);
932 z = kFlangeHalfLength-kBoltDepth;
933 flangecylinder->AddNode(bolt, i+1, new TGeoTranslation("",x,y,z));
936 cfcylinder->AddNode(foamcylinder,1,0);
937 cfcylinder->AddNode(flangecylinder,1,
938 new TGeoTranslation(0, 0, kInsertoHalfLength+kFlangeHalfLength));
939 cfcylinder->AddNode(flangecylinder,2,new TGeoCombiTrans(
940 0, 0, -kInsertoHalfLength-kFlangeHalfLength,
941 new TGeoRotation("",0,180,0) ) );
944 // SDD Support Cone with its internal inserts: a carbon fiber Pcon
945 // with holes which contains a stesalite Pcon which on turn contains a
948 dza = kConeThickness/kSinConeTheta-(kConeROutMax-kConeROutMin)/kTanConeTheta;
950 TGeoPcon *coneshape = new TGeoPcon(0.0, 360.0, 10);
952 coneshape->Z(0) = 0.0;
953 coneshape->Rmin(0) = kConeROutMin;
954 coneshape->Rmax(0) = kConeROutMax;
956 coneshape->Z(1) = kConeZOuterMilled - dza;
957 coneshape->Rmin(1) = coneshape->GetRmin(0);
958 coneshape->Rmax(1) = coneshape->GetRmax(0);
960 coneshape->Z(2) = kConeZOuterMilled;
961 coneshape->Rmax(2) = coneshape->GetRmax(0);
963 RadiusOfCurvature(kConeRCurv,0.,coneshape->GetZ(1),
964 coneshape->GetRmin(1),kConeTheta,z,rmin);
966 coneshape->Rmin(3) = rmin;
968 coneshape->Rmin(2) = RminFrom2Points(coneshape,3,1,coneshape->GetZ(2));
970 RadiusOfCurvature(kConeRCurv,0.,coneshape->GetZ(2),
971 coneshape->GetRmax(2),kConeTheta,z,rmax);
973 coneshape->Rmax(4) = rmax;
974 coneshape->Rmin(4) = RminFromZpCone(coneshape,3,kConeTheta,
975 coneshape->GetZ(4),0.0);
977 coneshape->Rmax(3) = RmaxFrom2Points(coneshape,4,2,coneshape->GetZ(3));
979 coneshape->Z(6) = kConeZCylinder - kConeDZin;
981 RadiusOfCurvature(kConeRCurv,90.0,coneshape->GetZ(6),0.0,
982 90.0-kConeTheta,z,rmin);
984 coneshape->Rmin(5) = RminFromZpCone(coneshape,3,kConeTheta,z);
985 coneshape->Rmax(5) = RmaxFromZpCone(coneshape,4,kConeTheta,z);
987 RadiusOfCurvature(kConeRCurv,90.-kConeTheta,
988 0.0,coneshape->Rmin(5),90.0,z,rmin);
989 coneshape->Rmin(6) = rmin;
990 coneshape->Rmax(6) = RmaxFromZpCone(coneshape,4,kConeTheta,
993 coneshape->Z(7) = coneshape->GetZ(6);
994 coneshape->Rmin(7) = kConeRinMin;
995 coneshape->Rmax(7) = coneshape->GetRmax(6);
997 coneshape->Rmin(8) = kConeRinMin;
999 RadiusOfCurvature(kConeRCurv,90.0,kConeZCylinder,kConeRinCylinder,
1000 90.0-kConeTheta,z,rmax);
1001 coneshape->Z(8) = z;
1002 coneshape->Rmax(8) = rmax;
1004 coneshape->Z(9) = kConeZCylinder;
1005 coneshape->Rmin(9) = kConeRinMin;
1006 coneshape->Rmax(9) = kConeRinCylinder;
1009 // SDD Cone Insert: another Pcon
1010 Double_t x0, y0, x1, y1, x2, y2;
1011 TGeoPcon *coneinsertshape = new TGeoPcon(0.0, 360.0, 9);
1013 coneinsertshape->Z(0) = coneshape->GetZ(0) + kConeCFThickness;
1014 coneinsertshape->Rmin(0) = coneshape->GetRmin(0) + kConeCFThickness;
1015 coneinsertshape->Rmax(0) = coneshape->GetRmax(0) - kConeCFThickness;
1017 x0 = coneshape->GetZ(0); y0 = coneshape->GetRmin(0);
1018 x1 = coneshape->GetZ(1); y1 = coneshape->GetRmin(1);
1019 x2 = coneshape->GetZ(2); y2 = coneshape->GetRmin(2);
1020 InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin);
1021 coneinsertshape->Z(1) = z;
1022 coneinsertshape->Rmin(1) = rmin;
1023 coneinsertshape->Rmax(1) = coneinsertshape->GetRmax(0);
1025 x0 = coneshape->GetZ(1); y0 = coneshape->GetRmax(1);
1026 x1 = coneshape->GetZ(2); y1 = coneshape->GetRmax(2);
1027 x2 = coneshape->GetZ(3); y2 = coneshape->GetRmax(3);
1028 InsidePoint(x0, y0, x1, y1, x2, y2, -kConeCFThickness, z, rmax);
1029 coneinsertshape->Z(2) = z;
1030 coneinsertshape->Rmax(2) = rmax;
1032 x0 = coneshape->GetZ(2); y0 = coneshape->GetRmin(2);
1033 x1 = coneshape->GetZ(3); y1 = coneshape->GetRmin(3);
1034 x2 = coneshape->GetZ(4); y2 = coneshape->GetRmin(4);
1035 InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin);
1036 coneinsertshape->Z(3) = z;
1037 coneinsertshape->Rmin(3) = rmin;
1039 x0 = coneinsertshape->GetZ(1); y0 = coneinsertshape->GetRmin(1);
1040 x1 = coneinsertshape->GetZ(3); y1 = coneinsertshape->GetRmin(3);
1041 coneinsertshape->Rmin(2) = Yfrom2Points(x0, y0, x1, y1,
1042 coneinsertshape->Z(2));
1044 x0 = coneshape->GetZ(3); y0 = coneshape->GetRmax(3);
1045 x1 = coneshape->GetZ(4); y1 = coneshape->GetRmax(4);
1046 x2 = coneshape->GetZ(5); y2 = coneshape->GetRmax(5);
1047 InsidePoint(x0, y0, x1, y1, x2, y2, -kConeCFThickness, z, rmax);
1048 coneinsertshape->Z(4) = z;
1049 coneinsertshape->Rmax(4) = rmax;
1051 x0 = coneinsertshape->GetZ(2); y0 = coneinsertshape->GetRmax(2);
1052 x1 = coneinsertshape->GetZ(4); y1 = coneinsertshape->GetRmax(4);
1053 coneinsertshape->Rmax(3) = Yfrom2Points(x0, y0, x1, y1,
1054 coneinsertshape->Z(3));
1056 x0 = coneshape->GetZ(4); y0 = coneshape->GetRmin(4);
1057 x1 = coneshape->GetZ(5); y1 = coneshape->GetRmin(5);
1058 x2 = coneshape->GetZ(6); y2 = coneshape->GetRmin(6);
1059 InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin);
1060 coneinsertshape->Z(5) = z;
1061 coneinsertshape->Rmin(5) = rmin;
1062 coneinsertshape->Rmax(5) = coneinsertshape->GetRmax(4) -
1063 kTanConeTheta*(coneinsertshape->GetZ(5) - coneinsertshape->GetZ(4));
1065 x0 = coneinsertshape->GetZ(3); y0 = coneinsertshape->GetRmin(3);
1066 x1 = coneinsertshape->GetZ(5); y1 = coneinsertshape->GetRmin(5);
1067 coneinsertshape->Rmin(4) = Yfrom2Points(x0, y0, x1, y1,
1068 coneinsertshape->Z(4));
1070 x0 = coneshape->GetZ(5); y0 = coneshape->GetRmin(5);
1071 x1 = coneshape->GetZ(6); y1 = coneshape->GetRmin(6);
1072 x2 = coneshape->GetZ(7); y2 = coneshape->GetRmin(7);
1073 InsidePoint(x0, y0, x1, y1, x2, y2, kConeCFThickness, z, rmin);
1074 coneinsertshape->Z(6) = z;
1075 coneinsertshape->Rmin(6) = rmin;
1076 coneinsertshape->Rmax(6) = coneinsertshape->GetRmax(4) -
1077 kTanConeTheta*(coneinsertshape->GetZ(6) - coneinsertshape->GetZ(4));
1079 coneinsertshape->Z(7) = coneinsertshape->GetZ(6);
1080 coneinsertshape->Rmin(7) = coneshape->GetRmin(7) + kConeCFThickness;
1081 coneinsertshape->Rmax(7) = coneinsertshape->GetRmax(6);
1083 coneinsertshape->Z(8) = coneshape->GetZ(9) - kConeCFThickness;
1084 coneinsertshape->Rmin(8) = coneinsertshape->GetRmin(7);
1085 coneinsertshape->Rmax(8) = coneinsertshape->GetRmax(4) -
1086 kTanConeTheta*(coneinsertshape->GetZ(8) - coneinsertshape->GetZ(4));
1088 // SDD Cone Foam: another Pcon
1089 TGeoPcon *conefoamshape = new TGeoPcon(0.0, 360.0, 4);
1091 RadiusOfCurvature(kConeRCurv+kConeCFThickness,0.0,coneinsertshape->GetZ(1),
1092 coneinsertshape->GetRmin(1),kConeTheta,z,rmin);
1094 conefoamshape->Z(0) = z;
1095 conefoamshape->Rmin(0) = rmin;
1096 conefoamshape->Rmax(0) = conefoamshape->GetRmin(0);
1098 conefoamshape->Z(1) = conefoamshape->GetZ(0)+
1099 (kConeThickness-2.0*kConeCFThickness)/kSinConeTheta;
1100 conefoamshape->Rmin(1) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1101 conefoamshape->GetZ(1));
1102 conefoamshape->Rmax(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1103 conefoamshape->GetZ(1));
1105 conefoamshape->Z(2) = coneshape->GetZ(5)-kConeCFThickness;
1106 conefoamshape->Rmin(2) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1107 conefoamshape->GetZ(2));
1108 conefoamshape->Rmax(2) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1109 conefoamshape->GetZ(2));
1111 conefoamshape->Z(3) = coneinsertshape->GetZ(5)+
1112 (kConeThickness-2.0*kConeCFThickness)*kCosConeTheta;
1113 conefoamshape->Rmax(3) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1114 conefoamshape->GetZ(3));
1115 conefoamshape->Rmin(3) = conefoamshape->GetRmax(3);
1117 // SDD Cone Holes: Pcon's
1118 // A single hole volume gives an overlap with coneinsert, so
1119 // three contiguous volumes are created: one to be put in the cone foam
1120 // and two in the cone carbon fiber envelope
1121 TGeoPcon *hole1shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4);
1123 hole1shape->Rmin(0) = kHole1RMax;
1124 hole1shape->Rmax(0) = hole1shape->GetRmin(0);
1125 hole1shape->Z(0) = ZFromRminpCone(conefoamshape,0,kConeTheta,
1126 hole1shape->GetRmin(0));
1128 hole1shape->Rmax(1) = hole1shape->GetRmax(0);
1129 hole1shape->Z(1) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1130 hole1shape->GetRmax(1));
1131 hole1shape->Rmin(1) = RminFromZpCone(conefoamshape,1,kConeTheta,
1132 hole1shape->GetZ(1));
1134 hole1shape->Rmin(2) = kHole1RMin;
1135 hole1shape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1136 hole1shape->GetRmin(2));
1137 hole1shape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta,
1138 hole1shape->GetZ(2));
1140 hole1shape->Rmin(3) = hole1shape->GetRmin(2);
1141 hole1shape->Rmax(3) = hole1shape->GetRmin(3);
1142 hole1shape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1143 hole1shape->GetRmax(3));
1145 TGeoPcon *hole11shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4);
1147 hole11shape->Rmin(0) = kHole1RMax;
1148 hole11shape->Rmax(0) = hole11shape->GetRmin(0);
1149 hole11shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta,
1150 hole11shape->GetRmin(0));
1152 hole11shape->Rmax(1) = hole11shape->GetRmax(0);
1153 hole11shape->Z(1) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1154 hole11shape->GetRmax(1));
1155 hole11shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta,
1156 hole11shape->GetZ(1));
1158 hole11shape->Rmin(2) = kHole1RMin;
1159 hole11shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta,
1160 hole11shape->GetRmin(2));
1161 hole11shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1162 hole11shape->GetZ(2));
1164 hole11shape->Rmin(3) = hole11shape->GetRmin(2);
1165 hole11shape->Rmax(3) = hole11shape->GetRmin(3);
1166 hole11shape->Z(3) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1167 hole11shape->GetRmax(3));
1169 TGeoPcon *hole12shape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4);
1171 hole12shape->Rmin(0) = kHole1RMax;
1172 hole12shape->Rmax(0) = hole12shape->GetRmin(0);
1173 hole12shape->Z(0) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1174 hole12shape->GetRmin(0));
1176 hole12shape->Rmax(1) = hole12shape->GetRmax(0);
1177 hole12shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1178 hole12shape->GetRmax(1));
1179 hole12shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1180 hole12shape->GetZ(1));
1182 hole12shape->Rmin(2) = kHole1RMin;
1183 hole12shape->Z(2) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1184 hole12shape->GetRmin(2));
1185 hole12shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta,
1186 hole12shape->GetZ(2));
1188 hole12shape->Rmin(3) = hole12shape->GetRmin(2);
1189 hole12shape->Rmax(3) = hole12shape->GetRmin(3);
1190 hole12shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1191 hole12shape->GetRmax(3));
1194 TGeoPcon *hole2shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4);
1196 hole2shape->Rmin(0) = kHole2RMax;
1197 hole2shape->Rmax(0) = hole2shape->GetRmin(0);
1198 hole2shape->Z(0) = ZFromRminpCone(conefoamshape,0,kConeTheta,
1199 hole2shape->GetRmin(0));
1201 hole2shape->Rmax(1) = hole2shape->GetRmax(0);
1202 hole2shape->Z(1) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1203 hole2shape->GetRmax(1));
1204 hole2shape->Rmin(1) = RminFromZpCone(conefoamshape,1,kConeTheta,
1205 hole2shape->GetZ(1));
1207 hole2shape->Rmin(2) = kHole2RMin;
1208 hole2shape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1209 hole2shape->GetRmin(2));
1210 hole2shape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta,
1211 hole2shape->GetZ(2));
1213 hole2shape->Rmin(3) = hole2shape->GetRmin(2);
1214 hole2shape->Rmax(3) = hole2shape->GetRmin(3);
1215 hole2shape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1216 hole2shape->GetRmax(3));
1218 TGeoPcon *hole21shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4);
1220 hole21shape->Rmin(0) = kHole2RMax;
1221 hole21shape->Rmax(0) = hole21shape->GetRmin(0);
1222 hole21shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta,
1223 hole21shape->GetRmin(0));
1225 hole21shape->Rmax(1) = hole21shape->GetRmax(0);
1226 hole21shape->Z(1) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1227 hole21shape->GetRmax(1));
1228 hole21shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta,
1229 hole21shape->GetZ(1));
1231 hole21shape->Rmin(2) = kHole2RMin;
1232 hole21shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta,
1233 hole21shape->GetRmin(2));
1234 hole21shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1235 hole21shape->GetZ(2));
1237 hole21shape->Rmin(3) = hole21shape->GetRmin(2);
1238 hole21shape->Rmax(3) = hole21shape->GetRmin(3);
1239 hole21shape->Z(3) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1240 hole21shape->GetRmax(3));
1242 TGeoPcon *hole22shape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4);
1244 hole22shape->Rmin(0) = kHole2RMax;
1245 hole22shape->Rmax(0) = hole22shape->GetRmin(0);
1246 hole22shape->Z(0) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1247 hole22shape->GetRmin(0));
1249 hole22shape->Rmax(1) = hole22shape->GetRmax(0);
1250 hole22shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1251 hole22shape->GetRmax(1));
1252 hole22shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1253 hole22shape->GetZ(1));
1255 hole22shape->Rmin(2) = kHole2RMin;
1256 hole22shape->Z(2) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1257 hole22shape->GetRmin(2));
1258 hole22shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta,
1259 hole22shape->GetZ(2));
1261 hole22shape->Rmin(3) = hole22shape->GetRmin(2);
1262 hole22shape->Rmax(3) = hole22shape->GetRmin(3);
1263 hole22shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1264 hole22shape->GetRmax(3));
1268 holePhi = (kHole3Width/kHole3RMin)*TMath::RadToDeg();
1270 TGeoPcon *hole3shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1272 hole3shape->Rmin(0) = kHole3RMin + kHole3DeltaR;
1273 hole3shape->Rmax(0) = hole3shape->GetRmin(0);
1274 hole3shape->Z(0) = ZFromRminpCone(conefoamshape,0,kConeTheta,
1275 hole3shape->GetRmin(0));
1277 hole3shape->Rmax(1) = hole3shape->GetRmax(0);
1278 hole3shape->Z(1) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1279 hole3shape->GetRmax(1));
1280 hole3shape->Rmin(1) = RminFromZpCone(conefoamshape,1,kConeTheta,
1281 hole3shape->GetZ(1));
1283 hole3shape->Rmin(2) = kHole3RMin;
1284 hole3shape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1285 hole3shape->GetRmin(2));
1286 hole3shape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta,
1287 hole3shape->GetZ(2));
1289 hole3shape->Rmin(3) = hole3shape->GetRmin(2);
1290 hole3shape->Rmax(3) = hole3shape->GetRmin(3);
1291 hole3shape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1292 hole3shape->GetRmax(3));
1294 TGeoPcon *hole31shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1296 hole31shape->Rmin(0) = kHole3RMin + kHole3DeltaR;
1297 hole31shape->Rmax(0) = hole31shape->GetRmin(0);
1298 hole31shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta,
1299 hole31shape->GetRmin(0));
1301 hole31shape->Rmax(1) = hole31shape->GetRmax(0);
1302 hole31shape->Z(1) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1303 hole31shape->GetRmax(1));
1304 hole31shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta,
1305 hole31shape->GetZ(1));
1307 hole31shape->Rmin(2) = kHole3RMin;
1308 hole31shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta,
1309 hole31shape->GetRmin(2));
1310 hole31shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,kConeTheta,
1311 hole31shape->GetZ(2));
1313 hole31shape->Rmin(3) = hole31shape->GetRmin(2);
1314 hole31shape->Rmax(3) = hole31shape->GetRmin(3);
1315 hole31shape->Z(3) = ZFromRminpCone(coneinsertshape,3,kConeTheta,
1316 hole31shape->GetRmax(3));
1318 TGeoPcon *hole32shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1320 hole32shape->Rmin(0) = kHole3RMin + kHole3DeltaR;
1321 hole32shape->Rmax(0) = hole32shape->GetRmin(0);
1322 hole32shape->Z(0) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1323 hole32shape->GetRmin(0));
1325 hole32shape->Rmax(1) = hole32shape->GetRmax(0);
1326 hole32shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1327 hole32shape->GetRmax(1));
1328 hole32shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,4,kConeTheta,
1329 hole32shape->GetZ(1));
1331 hole32shape->Rmin(2) = kHole3RMin;
1332 hole32shape->Z(2) = ZFromRmaxpCone(coneinsertshape,4,kConeTheta,
1333 hole32shape->GetRmin(2));
1334 hole32shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta,
1335 hole32shape->GetZ(2));
1337 hole32shape->Rmin(3) = hole32shape->GetRmin(2);
1338 hole32shape->Rmax(3) = hole32shape->GetRmin(3);
1339 hole32shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1340 hole32shape->GetRmax(3));
1343 holePhi = (kHole4Width/kHole4RMin)*TMath::RadToDeg();
1345 TGeoPcon *hole4shape = new TGeoPcon(-holePhi/2., holePhi, 4);
1347 hole4shape->Rmin(0) = kHole4RMin + kHole4DeltaR;
1348 hole4shape->Rmax(0) = hole4shape->GetRmin(0);
1349 hole4shape->Z(0) = ZFromRminpCone(coneshape,3,kConeTheta,
1350 hole4shape->GetRmin(0));
1352 hole4shape->Rmax(1) = hole4shape->GetRmax(0);
1353 hole4shape->Z(1) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1354 hole4shape->GetRmax(1));
1355 hole4shape->Rmin(1) = RminFromZpCone(coneshape,3,kConeTheta,
1356 hole4shape->GetZ(1));
1358 hole4shape->Rmin(2) = kHole4RMin;
1359 hole4shape->Z(2) = ZFromRminpCone(coneshape,3,kConeTheta,
1360 hole4shape->GetRmin(2));
1361 hole4shape->Rmax(2) = RmaxFromZpCone(coneshape,4,kConeTheta,
1362 hole4shape->GetZ(2));
1364 hole4shape->Rmin(3) = hole4shape->GetRmin(2);
1365 hole4shape->Rmax(3) = hole4shape->GetRmin(3);
1366 hole4shape->Z(3) = ZFromRmaxpCone(coneshape,4,kConeTheta,
1367 hole4shape->GetRmax(3));
1369 // Cables to be put inside the holes: Pcon's
1370 // (fractions are manually computed from AliITSv11GeometrySDD::SDDCables
1371 TGeoPcon *hole1plastshape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4);
1373 hole1plastshape->Rmin(0) = hole1shape->GetRmin(0);
1374 hole1plastshape->Rmax(0) = hole1shape->GetRmax(0);
1375 hole1plastshape->Z(0) = hole1shape->GetZ(0);
1377 hole1plastshape->Rmin(1) = hole1shape->GetRmin(1);
1378 hole1plastshape->Rmax(1) = hole1shape->GetRmax(1);
1379 hole1plastshape->Z(1) = hole1shape->GetZ(1);
1381 dza = hole1plastshape->GetRmax(0) - (kHole1RMax-kHole1RMin)*kHolePlasticFrac;
1383 hole1plastshape->Rmin(2) = dza;
1384 hole1plastshape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1385 hole1plastshape->GetRmin(2));
1386 hole1plastshape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta,
1387 hole1plastshape->GetZ(2));
1389 hole1plastshape->Rmin(3) = hole1plastshape->GetRmin(2);
1390 hole1plastshape->Rmax(3) = hole1plastshape->GetRmin(3);
1391 hole1plastshape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1392 hole1plastshape->GetRmax(3));
1394 TGeoPcon *hole1Cushape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4);
1396 hole1Cushape->Rmin(0) = hole1plastshape->GetRmin(2);
1397 hole1Cushape->Rmax(0) = hole1Cushape->GetRmin(0);
1398 hole1Cushape->Z(0) = hole1plastshape->GetZ(2);
1400 dza = hole1Cushape->GetRmax(0) - (kHole1RMax-kHole1RMin)*kHoleCuFrac;
1402 hole1Cushape->Rmin(1) = dza;
1403 hole1Cushape->Rmax(1) = hole1Cushape->GetRmax(0);
1404 hole1Cushape->Z(1) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1405 hole1Cushape->GetRmin(1));
1407 hole1Cushape->Rmax(2) = hole1Cushape->GetRmax(0);
1408 hole1Cushape->Rmin(2) = hole1Cushape->GetRmin(1);
1409 hole1Cushape->Z(2) = hole1plastshape->GetZ(3);
1411 hole1Cushape->Rmin(3) = hole1Cushape->GetRmin(1);
1412 hole1Cushape->Rmax(3) = hole1Cushape->GetRmin(3);
1413 hole1Cushape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1414 hole1Cushape->GetRmax(3));
1416 TGeoPcon *hole1glassshape = new TGeoPcon(-kHole1Phi/2., kHole1Phi, 4);
1418 hole1glassshape->Rmin(0) = hole1Cushape->GetRmin(1);
1419 hole1glassshape->Rmax(0) = hole1glassshape->GetRmin(0);
1420 hole1glassshape->Z(0) = hole1Cushape->GetZ(1);
1422 dza = hole1glassshape->GetRmax(0) - (kHole1RMax-kHole1RMin)*kHoleGlassFrac;
1424 hole1glassshape->Rmin(1) = dza;
1425 hole1glassshape->Rmax(1) = hole1glassshape->GetRmax(0);
1426 hole1glassshape->Z(1) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1427 hole1glassshape->GetRmin(1));
1429 hole1glassshape->Rmax(2) = hole1glassshape->GetRmax(0);
1430 hole1glassshape->Rmin(2) = hole1glassshape->GetRmin(1);
1431 hole1glassshape->Z(2) = hole1Cushape->GetZ(3);
1433 hole1glassshape->Rmin(3) = hole1glassshape->GetRmin(1);
1434 hole1glassshape->Rmax(3) = hole1glassshape->GetRmin(3);
1435 hole1glassshape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1436 hole1glassshape->GetRmax(3));
1438 TGeoPcon *hole2plastshape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4);
1440 hole2plastshape->Rmin(0) = hole2shape->GetRmin(0);
1441 hole2plastshape->Rmax(0) = hole2shape->GetRmax(0);
1442 hole2plastshape->Z(0) = hole2shape->GetZ(0);
1444 hole2plastshape->Rmin(1) = hole2shape->GetRmin(1);
1445 hole2plastshape->Rmax(1) = hole2shape->GetRmax(1);
1446 hole2plastshape->Z(1) = hole2shape->GetZ(1);
1448 dza = hole2plastshape->GetRmax(0) - (kHole2RMax-kHole2RMin)*kHolePlasticFrac;
1450 hole2plastshape->Rmin(2) = dza;
1451 hole2plastshape->Z(2) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1452 hole2plastshape->GetRmin(2));
1453 hole2plastshape->Rmax(2) = RmaxFromZpCone(conefoamshape,3,kConeTheta,
1454 hole2plastshape->GetZ(2));
1456 hole2plastshape->Rmin(3) = hole2plastshape->GetRmin(2);
1457 hole2plastshape->Rmax(3) = hole2plastshape->GetRmin(3);
1458 hole2plastshape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1459 hole2plastshape->GetRmax(3));
1461 TGeoPcon *hole2Cushape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4);
1463 hole2Cushape->Rmin(0) = hole2plastshape->GetRmin(2);
1464 hole2Cushape->Rmax(0) = hole2Cushape->GetRmin(0);
1465 hole2Cushape->Z(0) = hole2plastshape->GetZ(2);
1467 dza = hole2Cushape->GetRmax(0) - (kHole2RMax-kHole2RMin)*kHoleCuFrac;
1469 hole2Cushape->Rmin(1) = dza;
1470 hole2Cushape->Rmax(1) = hole2Cushape->GetRmax(0);
1471 hole2Cushape->Z(1) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1472 hole2Cushape->GetRmin(1));
1474 hole2Cushape->Rmax(2) = hole2Cushape->GetRmax(0);
1475 hole2Cushape->Rmin(2) = hole2Cushape->GetRmin(1);
1476 hole2Cushape->Z(2) = hole2plastshape->GetZ(3);
1478 hole2Cushape->Rmin(3) = hole2Cushape->GetRmin(1);
1479 hole2Cushape->Rmax(3) = hole2Cushape->GetRmin(3);
1480 hole2Cushape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1481 hole2Cushape->GetRmax(3));
1483 TGeoPcon *hole2glassshape = new TGeoPcon(-kHole2Phi/2., kHole2Phi, 4);
1485 hole2glassshape->Rmin(0) = hole2Cushape->GetRmin(1);
1486 hole2glassshape->Rmax(0) = hole2glassshape->GetRmin(0);
1487 hole2glassshape->Z(0) = hole2Cushape->GetZ(1);
1489 dza = hole2glassshape->GetRmax(0) - (kHole2RMax-kHole2RMin)*kHoleGlassFrac;
1491 hole2glassshape->Rmin(1) = dza;
1492 hole2glassshape->Rmax(1) = hole2glassshape->GetRmax(0);
1493 hole2glassshape->Z(1) = ZFromRminpCone(conefoamshape,1,kConeTheta,
1494 hole2glassshape->GetRmin(1));
1496 hole2glassshape->Rmax(2) = hole2glassshape->GetRmax(0);
1497 hole2glassshape->Rmin(2) = hole2glassshape->GetRmin(1);
1498 hole2glassshape->Z(2) = hole2Cushape->GetZ(3);
1500 hole2glassshape->Rmin(3) = hole2glassshape->GetRmin(1);
1501 hole2glassshape->Rmax(3) = hole2glassshape->GetRmin(3);
1502 hole2glassshape->Z(3) = ZFromRmaxpCone(conefoamshape,3,kConeTheta,
1503 hole2glassshape->GetRmax(3));
1506 // Debug if requested
1508 coneshape->InspectShape();
1509 coneinsertshape->InspectShape();
1510 conefoamshape->InspectShape();
1511 hole1shape->InspectShape();
1512 hole2shape->InspectShape();
1513 hole3shape->InspectShape();
1514 hole4shape->InspectShape();
1518 // We have the shapes: now create the real volumes
1520 TGeoVolume *cfcone = new TGeoVolume("SDDCarbonFiberCone",
1521 coneshape,medSDDcf);
1522 cfcone->SetVisibility(kTRUE);
1523 cfcone->SetLineColor(4); // Blue
1524 cfcone->SetLineWidth(1);
1525 cfcone->SetFillColor(cfcone->GetLineColor());
1526 cfcone->SetFillStyle(4000); // 0% transparent
1528 TGeoVolume *cfconeinsert = new TGeoVolume("SDDCarbonFiberConeInsert",
1529 coneinsertshape,medSDDste);
1530 cfconeinsert->SetVisibility(kTRUE);
1531 cfconeinsert->SetLineColor(2); // Red
1532 cfconeinsert->SetLineWidth(1);
1533 cfconeinsert->SetFillColor(cfconeinsert->GetLineColor());
1534 cfconeinsert->SetFillStyle(4050); // 50% transparent
1536 TGeoVolume *cfconefoam = new TGeoVolume("SDDCarbonFiberConeFoam",
1537 conefoamshape,medSDDroh);
1538 cfconefoam->SetVisibility(kTRUE);
1539 cfconefoam->SetLineColor(7); // Light blue
1540 cfconefoam->SetLineWidth(1);
1541 cfconefoam->SetFillColor(cfconefoam->GetLineColor());
1542 cfconefoam->SetFillStyle(4050); // 50% transparent
1544 TGeoVolume *hole1 = new TGeoVolume("SDDCableHole1",
1545 hole1shape,medSDDair);
1546 hole1->SetVisibility(kTRUE);
1547 hole1->SetLineColor(5); // Yellow
1548 hole1->SetLineWidth(1);
1549 hole1->SetFillColor(hole1->GetLineColor());
1550 hole1->SetFillStyle(4090); // 90% transparent
1552 TGeoVolume *hole11 = new TGeoVolume("SDDCableHole11",
1553 hole11shape,medSDDair);
1554 hole11->SetVisibility(kTRUE);
1555 hole11->SetLineColor(5); // Yellow
1556 hole11->SetLineWidth(1);
1557 hole11->SetFillColor(hole11->GetLineColor());
1558 hole11->SetFillStyle(4090); // 90% transparent
1560 TGeoVolume *hole12 = new TGeoVolume("SDDCableHole12",
1561 hole12shape,medSDDair);
1562 hole12->SetVisibility(kTRUE);
1563 hole12->SetLineColor(5); // Yellow
1564 hole12->SetLineWidth(1);
1565 hole12->SetFillColor(hole12->GetLineColor());
1566 hole12->SetFillStyle(4090); // 90% transparent
1568 TGeoVolume *hole1plast = new TGeoVolume("SDDCableHole1Plast",
1569 hole1plastshape,medSDDplast);
1570 hole1plast->SetVisibility(kTRUE);
1571 hole1plast->SetLineColor(kBlue);
1572 hole1plast->SetLineWidth(1);
1573 hole1plast->SetFillColor(hole1plast->GetLineColor());
1574 hole1plast->SetFillStyle(4090); // 90% transparent
1576 TGeoVolume *hole1Cu = new TGeoVolume("SDDCableHole1Cu",
1577 hole1Cushape,medSDDCu);
1578 hole1Cu->SetVisibility(kTRUE);
1579 hole1Cu->SetLineColor(kRed);
1580 hole1Cu->SetLineWidth(1);
1581 hole1Cu->SetFillColor(hole1Cu->GetLineColor());
1582 hole1Cu->SetFillStyle(4090); // 90% transparent
1584 TGeoVolume *hole1glass = new TGeoVolume("SDDCableHole1glass",
1585 hole1glassshape,medSDDglass);
1586 hole1glass->SetVisibility(kTRUE);
1587 hole1glass->SetLineColor(kGreen);
1588 hole1glass->SetLineWidth(1);
1589 hole1glass->SetFillColor(hole1glass->GetLineColor());
1590 hole1glass->SetFillStyle(4090); // 90% transparent
1592 TGeoVolume *hole2 = new TGeoVolume("SDDCableHole2",
1593 hole2shape,medSDDair);
1594 hole2->SetVisibility(kTRUE);
1595 hole2->SetLineColor(5); // Yellow
1596 hole2->SetLineWidth(1);
1597 hole2->SetFillColor(hole2->GetLineColor());
1598 hole2->SetFillStyle(4090); // 90% transparent
1600 TGeoVolume *hole21 = new TGeoVolume("SDDCableHole21",
1601 hole21shape,medSDDair);
1602 hole21->SetVisibility(kTRUE);
1603 hole21->SetLineColor(5); // Yellow
1604 hole21->SetLineWidth(1);
1605 hole21->SetFillColor(hole21->GetLineColor());
1606 hole21->SetFillStyle(4090); // 90% transparent
1608 TGeoVolume *hole22 = new TGeoVolume("SDDCableHole22",
1609 hole22shape,medSDDair);
1610 hole22->SetVisibility(kTRUE);
1611 hole22->SetLineColor(5); // Yellow
1612 hole22->SetLineWidth(1);
1613 hole22->SetFillColor(hole22->GetLineColor());
1614 hole22->SetFillStyle(4090); // 90% transparent
1616 TGeoVolume *hole2plast = new TGeoVolume("SDDCableHole2Plast",
1617 hole2plastshape,medSDDplast);
1618 hole2plast->SetVisibility(kTRUE);
1619 hole2plast->SetLineColor(kBlue);
1620 hole2plast->SetLineWidth(1);
1621 hole2plast->SetFillColor(hole2plast->GetLineColor());
1622 hole2plast->SetFillStyle(4090); // 90% transparent
1624 TGeoVolume *hole2Cu = new TGeoVolume("SDDCableHole2Cu",
1625 hole2Cushape,medSDDCu);
1626 hole2Cu->SetVisibility(kTRUE);
1627 hole2Cu->SetLineColor(kRed);
1628 hole2Cu->SetLineWidth(1);
1629 hole2Cu->SetFillColor(hole2Cu->GetLineColor());
1630 hole2Cu->SetFillStyle(4090); // 90% transparent
1632 TGeoVolume *hole2glass = new TGeoVolume("SDDCableHole2glass",
1633 hole2glassshape,medSDDglass);
1634 hole2glass->SetVisibility(kTRUE);
1635 hole2glass->SetLineColor(kGreen);
1636 hole2glass->SetLineWidth(1);
1637 hole2glass->SetFillColor(hole2glass->GetLineColor());
1638 hole2glass->SetFillStyle(4090); // 90% transparent
1640 TGeoVolume *hole3 = new TGeoVolume("SDDCableHole3",
1641 hole3shape,medSDDair);
1642 hole3->SetVisibility(kTRUE);
1643 hole3->SetLineColor(5); // Yellow
1644 hole3->SetLineWidth(1);
1645 hole3->SetFillColor(hole3->GetLineColor());
1646 hole3->SetFillStyle(4090); // 90% transparent
1648 TGeoVolume *hole31 = new TGeoVolume("SDDCableHole31",
1649 hole31shape,medSDDair);
1650 hole31->SetVisibility(kTRUE);
1651 hole31->SetLineColor(5); // Yellow
1652 hole31->SetLineWidth(1);
1653 hole31->SetFillColor(hole31->GetLineColor());
1654 hole31->SetFillStyle(4090); // 90% transparent
1656 TGeoVolume *hole32 = new TGeoVolume("SDDCableHole32",
1657 hole32shape,medSDDair);
1658 hole32->SetVisibility(kTRUE);
1659 hole32->SetLineColor(5); // Yellow
1660 hole32->SetLineWidth(1);
1661 hole32->SetFillColor(hole32->GetLineColor());
1662 hole32->SetFillStyle(4090); // 90% transparent
1664 TGeoVolume *hole4 = new TGeoVolume("SDDCableHole4",
1665 hole4shape,medSDDair);
1666 hole4->SetVisibility(kTRUE);
1667 hole4->SetLineColor(5); // Yellow
1668 hole4->SetLineWidth(1);
1669 hole4->SetFillColor(hole4->GetLineColor());
1670 hole4->SetFillStyle(4090); // 90% transparent
1673 cfconeinsert->AddNode(cfconefoam,1,0);
1675 hole1->AddNode(hole1plast, 1, 0);
1676 hole1->AddNode(hole1Cu, 1, 0);
1677 hole1->AddNode(hole1glass, 1, 0);
1679 hole2->AddNode(hole2plast, 1, 0);
1680 hole2->AddNode(hole2Cu, 1, 0);
1681 hole2->AddNode(hole2glass, 1, 0);
1683 for (Int_t i=0; i<12; i++) {
1684 Double_t phiH = i*30.0;
1685 cfconefoam->AddNode(hole1 , i+1, new TGeoRotation("", 0, 0, phiH));
1686 cfcone->AddNode(hole11, i+1, new TGeoRotation("", 0, 0, phiH));
1687 cfcone->AddNode(hole12, i+1, new TGeoRotation("", 0, 0, phiH));
1690 for (Int_t i=0; i<6; i++) {
1691 Double_t phiH = i*60.0;
1692 cfconefoam->AddNode(hole2 , i+1, new TGeoRotation("", 0, 0, phiH));
1693 cfcone->AddNode(hole21, i+1, new TGeoRotation("", 0, 0, phiH));
1694 cfcone->AddNode(hole22, i+1, new TGeoRotation("", 0, 0, phiH));
1697 for (Int_t i=0; i<kNHole3; i++) {
1698 Double_t phiH0 = 360./(Double_t)kNHole3;
1699 Double_t phiH = i*phiH0 + 0.5*phiH0;
1700 cfconefoam->AddNode(hole3 , i+1, new TGeoRotation("", phiH, 0, 0));
1701 cfcone->AddNode(hole31, i+1, new TGeoRotation("", phiH, 0, 0));
1702 cfcone->AddNode(hole32, i+1, new TGeoRotation("", phiH, 0, 0));
1705 cfcone->AddNode(cfconeinsert,1,0);
1708 for (Int_t i=0; i<kNHole4; i++) {
1709 Double_t phiH0 = 360./(Double_t)kNHole4;
1710 Double_t phiH = i*phiH0 + 0.25*phiH0;
1711 cfcone->AddNode(hole4, i+1, new TGeoRotation("", phiH, 0, 0));
1714 // Finally put everything in the mother volume
1715 moth->AddNode(cfcylinder,1,0);
1717 z = coneshape->Z(9);
1718 moth->AddNode(cfcone,1,new TGeoTranslation(0, 0, -z - kCylinderHalfLength));
1719 moth->AddNode(cfcone,2,new TGeoCombiTrans (0, 0, z + kCylinderHalfLength,
1720 new TGeoRotation("", 0, 180, 0) ));
1726 //______________________________________________________________________
1727 void AliITSv11GeometrySupport::SSDCone(TGeoVolume *moth,TGeoManager *mgr)
1730 // Creates the SSD support cone and cylinder geometry. as a
1731 // volume assembly and adds it to the mother volume
1732 // (part of this code is taken or anyway inspired to SSDCone method
1733 // of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
1736 // moth : the TGeoVolume owing the volume structure
1737 // mgr : the GeoManager (default gGeoManager)
1740 // Created: ??? Bjorn S. Nilsen
1741 // Updated: 08 Mar 2008 Mario Sitta
1743 // Technical data are taken from: "ITS Supporto Generale" (technical
1744 // drawings ALR3-0743/1, ALR3-0743/1A and ALR3-0743/1B), "Supporto Generale
1745 // Settore SSD" (technical drawings ALR3-0743/2A and ALR3-0743/2E), private
1746 // communication with B. Giraudo
1748 // Updated: 11 Apr 2008 Mario Sitta
1749 // Measures from drawings give overlaps with SPD thermal shield wings,
1750 // so the terminal part of the SSD cone was reduced
1752 // Updated: 30 Mar 2010 Mario Sitta
1753 // Following M. van Leeuwen's suggestion on material budget, the thickness
1754 // of the carbon fiber cylinder was increased from 0.6 to 0.625mm
1756 // Dimensions of the Central cylinder and flanges
1757 const Double_t kCylinderHalfLength = (1144.0/2) *fgkmm;
1758 const Double_t kCylinderOuterRadius = ( 595.0/2) *fgkmm;
1759 const Double_t kCylinderThickness = 0.625*fgkmm;
1760 const Double_t kFoamHalfLength = (1020.0/2) *fgkmm;
1761 const Double_t kFoamThickness = 5.0 *fgkmm;
1762 const Double_t kFlangeHalfLength =
1763 (kCylinderHalfLength-kFoamHalfLength)/2.;
1764 const Double_t kFlangeInnerRadius = ( 563.0/2) *fgkmm;
1765 // Dimensions of the Cone
1766 const Double_t kConeROuterMin = ( 957.0/2) *fgkmm;
1767 const Double_t kConeROuterMax = ( 997.0/2) *fgkmm;
1768 const Double_t kConeRInnerMin = ( 564.0/2) *fgkmm;
1769 const Double_t kConeRCurv1 = 10.0 *fgkmm;
1770 const Double_t kConeRCurv2 = 25.0 *fgkmm;
1771 const Double_t kConeCent1RCurv2 = ( 578.0/2) *fgkmm;
1772 const Double_t kConeCent2RCurv2 = ( 592.0/2) *fgkmm;
1773 // const Double_t kConeZOuterRing = 47.0 *fgkmm;
1774 // const Double_t kConeZOuterRingInside = 30.25*fgkmm;
1775 // const Double_t kConeZInnerRing = 161.5 *fgkmm;
1776 // const Double_t kConeZLength = 176.5 *fgkmm;
1777 const Double_t kConeZOuterRing = 38.5 *fgkmm;
1778 const Double_t kConeZOuterRingInside = 22.2 *fgkmm;
1779 const Double_t kConeZInnerRing = 153.0 *fgkmm;
1780 const Double_t kConeZLength = 168.0 *fgkmm;
1781 const Double_t kConeZPosition = kConeZLength + kCylinderHalfLength;
1782 const Double_t kConeThickness = 13.0 *fgkmm; // Cone thickness
1783 const Double_t kConeTheta = 39.1 *fgkDegree; // Cone angle
1784 const Double_t kSinConeTheta =
1785 TMath::Sin(kConeTheta*TMath::DegToRad());
1786 const Double_t kCosConeTheta =
1787 TMath::Cos(kConeTheta*TMath::DegToRad());
1788 // Dimensions of the Foam cores
1789 const Double_t kConeFoam1Length = 112.3 *fgkmm;
1790 const Double_t kConeFoam2Length = 58.4 *fgkmm;
1791 // Dimensions of the Cone Holes
1792 const Double_t kCoolingHoleWidth = 40.0 *fgkmm;
1793 const Double_t kCoolingHoleHight = 30.0 *fgkmm;
1794 const Double_t kCoolingHoleRmin = 350.0 *fgkmm;
1795 const Double_t kCoolingHolePhi = 45.0 *fgkDegree;
1796 const Double_t kMountingHoleWidth = 20.0 *fgkmm;
1797 const Double_t kMountingHoleHight = 20.0 *fgkmm;
1798 const Double_t kMountingHoleRmin = 317.5 *fgkmm;
1799 const Double_t kMountingHolePhi = 60.0 *fgkDegree;
1800 const Double_t kCableHoleRin = ( 800.0/2) *fgkmm;
1801 const Double_t kCableHoleRout = ( 920.0/2) *fgkmm;
1802 const Double_t kCableHoleWidth = 200.0 *fgkmm;
1803 // const Double_t kCableHoleAngle = 42.0 *fgkDegree;
1804 // Dimensions of the Cone Wings
1805 const Double_t kWingRmax = 527.5 *fgkmm;
1806 const Double_t kWingWidth = 70.0 *fgkmm;
1807 const Double_t kWingHalfThick = ( 10.0/2) *fgkmm;
1808 const Double_t kThetaWing = 45.0 *fgkDegree;
1809 // Dimensions of the SSD-SDD Mounting Brackets
1810 const Double_t kBracketRmin = ( 541.0/2) *fgkmm;// See SDD ROutMin
1811 const Double_t kBracketRmax = ( 585.0/2) *fgkmm;
1812 const Double_t kBracketHalfLength = ( 4.0/2) *fgkmm;
1813 const Double_t kBracketPhi = (70.*fgkmm/kBracketRmax)*fgkRadian;
1815 const Double_t kCFThickness = 0.75*fgkmm; //Carb. fib. thick.
1819 Double_t rmin1, rmin2, rmax, z;
1824 <img src="picts/ITS/file_name.gif">
1827 ITS SSD central support and thermal shield cylinder.
1834 // Central cylinder with its internal foam and the lateral flanges:
1835 // a carbon fiber Pcon which contains a rohacell Tube and two
1837 TGeoPcon *externalcylshape = new TGeoPcon(0,360,4);
1839 rmax = kCylinderOuterRadius;
1840 rmin1 = kFlangeInnerRadius - kCylinderThickness;
1841 rmin2 = rmax - 2*kCylinderThickness - kFoamThickness;
1842 externalcylshape->DefineSection(0,-kCylinderHalfLength,rmin1,rmax);
1843 externalcylshape->DefineSection(1,-kFoamHalfLength ,rmin2,rmax);
1844 externalcylshape->DefineSection(2, kFoamHalfLength ,rmin2,rmax);
1845 externalcylshape->DefineSection(3, kCylinderHalfLength,rmin1,rmax);
1847 rmax = kCylinderOuterRadius - kCylinderThickness;
1848 rmin1 = rmax - kFoamThickness;
1849 TGeoTube *foamshape = new TGeoTube(rmin1,rmax,kFoamHalfLength);
1851 rmax = kCylinderOuterRadius - kCylinderThickness;
1852 rmin1 = rmax - kFoamThickness;
1853 rmin2 = kFlangeInnerRadius;
1854 TGeoCone *flangeshape = new TGeoCone(kFlangeHalfLength,
1855 rmin1,rmax,rmin2,rmax);
1858 // We have the shapes: now create the real volumes
1860 TGeoMedium *medSSDcf = mgr->GetMedium("ITS_SSD C (M55J)$");
1861 TGeoMedium *medSSDair = mgr->GetMedium("ITS_SSD AIR$");
1862 TGeoMedium *medSSDste = mgr->GetMedium("ITS_G10FR4$"); // stesalite
1863 TGeoMedium *medSSDroh = mgr->GetMedium("ITS_ROHACELL$");
1864 TGeoMedium *medSSDal = mgr->GetMedium("ITS_ALUMINUM$");
1866 TGeoVolume *cfcylinder = new TGeoVolume("SSDexternalcylinder",
1867 externalcylshape,medSSDcf);
1868 cfcylinder->SetVisibility(kTRUE);
1869 cfcylinder->SetLineColor(4); // blue
1870 cfcylinder->SetLineWidth(1);
1871 cfcylinder->SetFillColor(cfcylinder->GetLineColor());
1872 cfcylinder->SetFillStyle(4000); // 0% transparent
1874 TGeoVolume *foamcylinder = new TGeoVolume("SSDfoamcylinder",
1875 foamshape,medSSDroh);
1876 foamcylinder->SetVisibility(kTRUE);
1877 foamcylinder->SetLineColor(3); // green
1878 foamcylinder->SetLineWidth(1);
1879 foamcylinder->SetFillColor(foamcylinder->GetLineColor());
1880 foamcylinder->SetFillStyle(4050); // 50% transparent
1882 TGeoVolume *flangecylinder = new TGeoVolume("SSDflangecylinder",
1883 flangeshape,medSSDste);
1884 flangecylinder->SetVisibility(kTRUE);
1885 flangecylinder->SetLineColor(2); // red
1886 flangecylinder->SetLineWidth(1);
1887 flangecylinder->SetFillColor(flangecylinder->GetLineColor());
1888 flangecylinder->SetFillStyle(4050); // 50% transparent
1890 // Mount up the cylinder
1891 cfcylinder->AddNode(foamcylinder,1,0);
1892 cfcylinder->AddNode(flangecylinder,1,
1893 new TGeoTranslation(0, 0, kFoamHalfLength+kFlangeHalfLength));
1894 cfcylinder->AddNode(flangecylinder,2,new TGeoCombiTrans(
1895 0, 0, -kFoamHalfLength-kFlangeHalfLength,
1896 new TGeoRotation("",0,180,0) ) );
1899 // The whole Cone as an assembly
1900 TGeoVolumeAssembly *vC = new TGeoVolumeAssembly("ITSssdCone");
1903 // SSD Support Cone with its internal inserts: a carbon fiber Pcon
1904 // with holes which contains a stesalite Pcon which on turn contains a
1906 TGeoPcon *coneshape = new TGeoPcon(0.0, 360.0, 12);
1908 coneshape->Z(0) = 0.0;
1909 coneshape->Rmin(0) = kConeROuterMin;
1910 coneshape->Rmax(0) = kConeROuterMax;
1912 coneshape->Z(1) = kConeZOuterRingInside - kConeRCurv1;
1913 coneshape->Rmin(1) = coneshape->GetRmin(0);
1914 coneshape->Rmax(1) = coneshape->GetRmax(0);
1916 coneshape->Z(2) = kConeZOuterRingInside;
1917 coneshape->Rmin(2) = coneshape->GetRmin(1) - kConeRCurv1;
1918 coneshape->Rmax(2) = coneshape->GetRmax(0);
1920 coneshape->Z(3) = coneshape->GetZ(2);
1921 coneshape->Rmax(3) = coneshape->GetRmax(0);
1923 coneshape->Z(4) = kConeZOuterRing - kConeRCurv1;
1924 coneshape->Rmax(4) = coneshape->GetRmax(0);
1926 coneshape->Z(5) = kConeZOuterRing;
1927 coneshape->Rmax(5) = coneshape->GetRmax(4) - kConeRCurv1;
1929 coneshape->Z(6) = coneshape->GetZ(5);
1931 RadiusOfCurvature(kConeRCurv2,90.0,kConeZInnerRing,kConeCent1RCurv2,
1932 90.0-kConeTheta,z,rmin1);
1933 coneshape->Z(7) = z;
1934 coneshape->Rmin(7) = rmin1;
1936 coneshape->Rmin(3) = RminFromZpCone(coneshape,7,90.-kConeTheta,
1937 coneshape->GetZ(3));
1939 coneshape->Rmin(4) = RminFrom2Points(coneshape,3,7,coneshape->GetZ(4));
1941 coneshape->Rmin(5) = RminFrom2Points(coneshape,3,7,coneshape->GetZ(5));
1943 coneshape->Rmin(6) = coneshape->GetRmin(5);
1945 coneshape->Z(8) = kConeZInnerRing;
1946 coneshape->Rmin(8) = kConeCent1RCurv2;
1948 coneshape->Z(9) = coneshape->GetZ(8);
1949 coneshape->Rmin(9) = kConeRInnerMin;
1951 RadiusOfCurvature(kConeRCurv2,90.0,kConeZLength,kConeCent2RCurv2,
1952 90.0-kConeTheta,z,rmax);
1954 coneshape->Z(10) = z;
1955 coneshape->Rmin(10) = coneshape->GetRmin(9);
1956 coneshape->Rmax(10) = rmax;
1958 coneshape->Rmax(6) = RmaxFromZpCone(coneshape,10,90.-kConeTheta,
1959 coneshape->GetZ(6));
1961 coneshape->Rmax(7) = RmaxFrom2Points(coneshape,6,10,coneshape->GetZ(7));
1963 coneshape->Rmax(8) = RmaxFrom2Points(coneshape,6,10,coneshape->GetZ(8));
1965 coneshape->Rmax(9) = coneshape->GetRmax(8);
1967 coneshape->Z(11) = kConeZLength;
1968 coneshape->Rmin(11) = coneshape->GetRmin(10);
1969 coneshape->Rmax(11) = kConeCent2RCurv2;
1971 // SSD Cone Insert: another Pcon
1972 Double_t x0, y0, x1, y1, x2, y2;
1973 TGeoPcon *coneinsertshape = new TGeoPcon(0.0,360.0,12);
1975 coneinsertshape->Z(0) = coneshape->GetZ(0) + kCFThickness;
1976 coneinsertshape->Rmin(0) = coneshape->GetRmin(0) + kCFThickness;
1977 coneinsertshape->Rmax(0) = coneshape->GetRmax(0) - kCFThickness;
1979 x0 = coneshape->GetZ(0); y0 = coneshape->GetRmin(0);
1980 x1 = coneshape->GetZ(1); y1 = coneshape->GetRmin(1);
1981 x2 = coneshape->GetZ(2); y2 = coneshape->GetRmin(2);
1982 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
1983 coneinsertshape->Z(1) = z;
1984 coneinsertshape->Rmin(1) = rmin1;
1985 coneinsertshape->Rmax(1) = coneinsertshape->GetRmax(0);
1987 x0 = coneshape->GetZ(1); y0 = coneshape->GetRmin(1);
1988 x1 = coneshape->GetZ(2); y1 = coneshape->GetRmin(2);
1989 x2 = coneshape->GetZ(3); y2 = coneshape->GetRmin(3);
1990 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
1991 coneinsertshape->Z(2) = z;
1992 coneinsertshape->Rmin(2) = rmin1;
1993 coneinsertshape->Rmax(2) = coneinsertshape->GetRmax(1);
1995 x0 = coneshape->GetZ(2); y0 = coneshape->GetRmin(2);
1996 x1 = coneshape->GetZ(3); y1 = coneshape->GetRmin(3);
1997 x2 = coneshape->GetZ(4); y2 = coneshape->GetRmin(4);
1998 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
1999 coneinsertshape->Z(3) = z;
2000 coneinsertshape->Rmin(3) = rmin1;
2001 coneinsertshape->Rmax(3) = coneinsertshape->GetRmax(2);
2003 x0 = coneshape->GetZ(3); y0 = coneshape->GetRmax(3);
2004 x1 = coneshape->GetZ(4); y1 = coneshape->GetRmax(4);
2005 x2 = coneshape->GetZ(5); y2 = coneshape->GetRmax(5);
2006 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
2007 coneinsertshape->Z(4) = z;
2008 coneinsertshape->Rmax(4) = rmax;
2010 x0 = coneshape->GetZ(4); y0 = coneshape->GetRmax(4);
2011 x1 = coneshape->GetZ(5); y1 = coneshape->GetRmax(5);
2012 x2 = coneshape->GetZ(6); y2 = coneshape->GetRmax(6);
2013 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
2014 coneinsertshape->Z(5) = z;
2015 coneinsertshape->Rmax(5) = rmax;
2017 x0 = coneshape->GetZ(5); y0 = coneshape->GetRmax(5);
2018 x1 = coneshape->GetZ(6); y1 = coneshape->GetRmax(6);
2019 x2 = coneshape->GetZ(7); y2 = coneshape->GetRmax(7);
2020 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
2021 coneinsertshape->Z(6) = z;
2022 coneinsertshape->Rmax(6) = rmax;
2024 x0 = coneshape->GetZ(6); y0 = coneshape->GetRmin(6);
2025 x1 = coneshape->GetZ(7); y1 = coneshape->GetRmin(7);
2026 x2 = coneshape->GetZ(8); y2 = coneshape->GetRmin(8);
2027 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
2028 coneinsertshape->Z(7) = z;
2029 coneinsertshape->Rmin(7) = rmin1;
2031 coneinsertshape->Rmin(4) = RminFrom2Points(coneinsertshape,3,7,
2032 coneinsertshape->GetZ(4));
2034 coneinsertshape->Rmin(5) = RminFrom2Points(coneinsertshape,3,7,
2035 coneinsertshape->GetZ(5));
2037 coneinsertshape->Rmin(6) = coneinsertshape->GetRmin(5);
2039 x0 = coneshape->GetZ(7); y0 = coneshape->GetRmin(7);
2040 x1 = coneshape->GetZ(8); y1 = coneshape->GetRmin(8);
2041 x2 = coneshape->GetZ(9); y2 = coneshape->GetRmin(9);
2042 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
2043 coneinsertshape->Z(8) = z;
2044 coneinsertshape->Rmin(8) = rmin1;
2046 x0 = coneshape->GetZ( 8); y0 = coneshape->GetRmin( 8);
2047 x1 = coneshape->GetZ( 9); y1 = coneshape->GetRmin( 9);
2048 x2 = coneshape->GetZ(10); y2 = coneshape->GetRmin(10);
2049 InsidePoint(x0, y0, x1, y1, x2, y2, kCFThickness, z, rmin1);
2050 coneinsertshape->Z(9) = z;
2051 coneinsertshape->Rmin(9) = rmin1;
2053 x0 = coneshape->GetZ( 9); y0 = coneshape->GetRmax( 9);
2054 x1 = coneshape->GetZ(10); y1 = coneshape->GetRmax(10);
2055 x2 = coneshape->GetZ(11); y2 = coneshape->GetRmax(11);
2056 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
2057 coneinsertshape->Z(10) = z;
2058 coneinsertshape->Rmax(10) = rmax;
2059 coneinsertshape->Rmin(10) = coneinsertshape->GetRmin(9);
2061 coneinsertshape->Rmax(7) = RmaxFrom2Points(coneinsertshape,6,10,
2062 coneinsertshape->GetZ(7));
2064 coneinsertshape->Rmax(8) = RmaxFrom2Points(coneinsertshape,6,10,
2065 coneinsertshape->GetZ(8));
2067 coneinsertshape->Rmax(9) = coneinsertshape->GetRmax(8);
2069 x0 = coneshape->GetZ(10); y0 = coneshape->GetRmax(10);
2070 x1 = coneshape->GetZ(11); y1 = coneshape->GetRmax(11);
2071 x2 = coneshape->GetZ(11); y2 = coneshape->GetRmin(11);
2072 InsidePoint(x0, y0, x1, y1, x2, y2, -kCFThickness, z, rmax);
2073 coneinsertshape->Z(11) = z;
2074 coneinsertshape->Rmax(11) = rmax;
2075 coneinsertshape->Rmin(11) = coneinsertshape->GetRmin(10);
2077 // SSD Cone Foams: two other Pcon's
2078 TGeoPcon *conefoam1shape = new TGeoPcon(0.0, 360.0, 4);
2080 conefoam1shape->Z(0) = coneinsertshape->GetZ(3);
2081 conefoam1shape->Rmin(0) = coneinsertshape->GetRmin(3);
2082 conefoam1shape->Rmax(0) = conefoam1shape->GetRmin(0);
2084 conefoam1shape->Rmax(1) = conefoam1shape->GetRmax(0);
2085 conefoam1shape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
2086 conefoam1shape->GetRmax(1));
2087 conefoam1shape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
2088 conefoam1shape->GetZ(1));
2090 Double_t t = kConeThickness - 2*kCFThickness;
2091 conefoam1shape->Rmin(2) = conefoam1shape->GetRmax(0) -
2092 (kConeFoam1Length*kCosConeTheta - t*kSinConeTheta);
2093 conefoam1shape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
2094 conefoam1shape->GetRmin(2));
2095 conefoam1shape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
2096 conefoam1shape->GetZ(2));
2098 conefoam1shape->Rmin(3) = conefoam1shape->GetRmin(2);
2099 conefoam1shape->Rmax(3) = conefoam1shape->GetRmin(3);
2100 conefoam1shape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
2101 conefoam1shape->GetRmax(3));
2103 TGeoPcon *conefoam2shape = new TGeoPcon(0.0, 360.0, 4);
2105 conefoam2shape->Z(3) = coneinsertshape->GetZ(10);
2106 conefoam2shape->Rmin(3) = coneinsertshape->GetRmax(10);
2107 conefoam2shape->Rmax(3) = conefoam2shape->GetRmin(3);
2109 conefoam2shape->Rmin(2) = conefoam2shape->GetRmin(3);
2110 conefoam2shape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
2111 conefoam2shape->GetRmin(2));
2112 conefoam2shape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
2113 conefoam2shape->GetZ(2));
2115 conefoam2shape->Rmin(0) = conefoam2shape->GetRmax(2) +
2116 (kConeFoam2Length*kCosConeTheta - t*kSinConeTheta);
2117 conefoam2shape->Rmax(0) = conefoam2shape->GetRmin(0);
2118 conefoam2shape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
2119 conefoam2shape->GetRmin(0));
2121 conefoam2shape->Rmax(1) = conefoam2shape->GetRmax(0);
2122 conefoam2shape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
2123 conefoam2shape->GetRmax(1));
2124 conefoam2shape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
2125 conefoam2shape->GetZ(1));
2127 // SSD Cone Holes: Pcon's
2128 // A single hole volume gives an overlap with coneinsert, so
2129 // three contiguous volumes are created: one to be put in coneinsert
2130 // and two in the cone carbon fiber envelope
2132 holePhi = (kCoolingHoleWidth/kCoolingHoleRmin)*TMath::RadToDeg();
2134 TGeoPcon *coolingholeshape = new TGeoPcon(-holePhi/2., holePhi, 4);
2136 coolingholeshape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight;
2137 coolingholeshape->Rmax(0) = coolingholeshape->GetRmin(0);
2138 coolingholeshape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
2139 coolingholeshape->GetRmin(0));
2141 coolingholeshape->Rmax(1) = coolingholeshape->GetRmax(0);
2142 coolingholeshape->Z(1) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
2143 coolingholeshape->GetRmax(1));
2144 coolingholeshape->Rmin(1) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
2145 coolingholeshape->GetZ(1));
2147 coolingholeshape->Rmin(2) = kCoolingHoleRmin;
2148 coolingholeshape->Z(2) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
2149 coolingholeshape->GetRmin(2));
2150 coolingholeshape->Rmax(2) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
2151 coolingholeshape->GetZ(2));
2153 coolingholeshape->Rmin(3) = coolingholeshape->GetRmin(2);
2154 coolingholeshape->Rmax(3) = coolingholeshape->GetRmin(3);
2155 coolingholeshape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
2156 coolingholeshape->GetRmax(3));
2158 TGeoPcon *coolinghole2shape = new TGeoPcon(-holePhi/2., holePhi, 4);
2160 coolinghole2shape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight;
2161 coolinghole2shape->Rmax(0) = coolinghole2shape->GetRmin(0);
2162 coolinghole2shape->Z(0) = ZFromRminpCone(coneshape,3,90.-kConeTheta,
2163 coolinghole2shape->GetRmin(0));
2165 coolinghole2shape->Rmax(1) = coolinghole2shape->GetRmax(0);
2166 coolinghole2shape->Z(1) = coolingholeshape->GetZ(0);
2167 coolinghole2shape->Rmin(1) = RminFromZpCone(coneshape,3,90.-kConeTheta,
2168 coolinghole2shape->GetZ(1));
2170 coolinghole2shape->Rmin(2) = kCoolingHoleRmin;
2171 coolinghole2shape->Z(2) = ZFromRminpCone(coneshape,3,90.-kConeTheta,
2172 coolinghole2shape->GetRmin(2));
2173 coolinghole2shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
2174 coolinghole2shape->GetZ(2));
2176 coolinghole2shape->Rmin(3) = coolinghole2shape->GetRmin(2);
2177 coolinghole2shape->Rmax(3) = coolinghole2shape->GetRmin(3);
2178 coolinghole2shape->Z(3) = coolingholeshape->GetZ(2);
2180 TGeoPcon *coolinghole3shape = new TGeoPcon(-holePhi/2., holePhi, 4);
2182 coolinghole3shape->Rmin(0) = kCoolingHoleRmin + kCoolingHoleHight;
2183 coolinghole3shape->Rmax(0) = coolinghole3shape->GetRmin(0);
2184 coolinghole3shape->Z(0) = coolingholeshape->GetZ(1);
2186 coolinghole3shape->Rmax(1) = coolinghole3shape->GetRmax(0);
2187 coolinghole3shape->Z(1) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta,
2188 coolinghole3shape->GetRmax(1));
2189 coolinghole3shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
2190 coolinghole3shape->GetZ(1));
2192 coolinghole3shape->Rmin(2) = kCoolingHoleRmin;
2193 coolinghole3shape->Z(2) = coolingholeshape->GetZ(3);
2194 coolinghole3shape->Rmax(2) = RmaxFromZpCone(coneshape,7,90.-kConeTheta,
2195 coolinghole3shape->GetZ(2));
2197 coolinghole3shape->Rmin(3) = coolinghole3shape->GetRmin(2);
2198 coolinghole3shape->Rmax(3) = coolinghole3shape->GetRmin(3);
2199 coolinghole3shape->Z(3) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta,
2200 coolinghole3shape->GetRmax(3));
2203 holePhi = (kMountingHoleWidth/kMountingHoleRmin)*TMath::RadToDeg();
2205 TGeoPcon *mountingholeshape = new TGeoPcon(-holePhi/2., holePhi, 4);
2207 mountingholeshape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight;
2208 mountingholeshape->Rmax(0) = mountingholeshape->GetRmin(0);
2209 mountingholeshape->Z(0) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
2210 mountingholeshape->GetRmin(0));
2212 mountingholeshape->Rmin(1) = kMountingHoleRmin;
2213 mountingholeshape->Rmax(1) = mountingholeshape->GetRmax(0);
2214 mountingholeshape->Z(1) = ZFromRminpCone(coneinsertshape,3,90.-kConeTheta,
2215 mountingholeshape->GetRmin(1));
2217 mountingholeshape->Rmin(2) = mountingholeshape->GetRmin(1);
2218 mountingholeshape->Rmax(2) = mountingholeshape->GetRmax(1);
2219 mountingholeshape->Z(2) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
2220 mountingholeshape->GetRmax(2));
2222 mountingholeshape->Rmin(3) = mountingholeshape->GetRmin(2);
2223 mountingholeshape->Rmax(3) = mountingholeshape->GetRmin(3);
2224 mountingholeshape->Z(3) = ZFromRmaxpCone(coneinsertshape,7,90.-kConeTheta,
2225 mountingholeshape->GetRmax(3));
2227 TGeoPcon *mountinghole2shape = new TGeoPcon(-holePhi/2., holePhi, 4);
2229 mountinghole2shape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight;
2230 mountinghole2shape->Rmax(0) = mountingholeshape->GetRmin(0);
2231 mountinghole2shape->Z(0) = ZFromRminpCone(coneshape,3,90.-kConeTheta,
2232 mountinghole2shape->GetRmin(0));
2234 mountinghole2shape->Rmax(1) = mountinghole2shape->GetRmax(0);
2235 mountinghole2shape->Z(1) = mountingholeshape->Z(0);
2236 mountinghole2shape->Rmin(1) = RminFromZpCone(coneshape,3,90.-kConeTheta,
2237 mountinghole2shape->GetZ(1));
2239 mountinghole2shape->Rmin(2) = kMountingHoleRmin;
2240 mountinghole2shape->Z(2) = ZFromRminpCone(coneshape,3,90.-kConeTheta,
2241 mountinghole2shape->GetRmin(2));
2242 mountinghole2shape->Rmax(2) = RminFromZpCone(coneinsertshape,3,90.-kConeTheta,
2243 mountinghole2shape->GetZ(2));
2245 mountinghole2shape->Rmin(3) = mountinghole2shape->Rmin(2);
2246 mountinghole2shape->Rmax(3) = mountinghole2shape->Rmin(3);
2247 mountinghole2shape->Z(3) = mountingholeshape->Z(1);
2249 TGeoPcon *mountinghole3shape = new TGeoPcon(-holePhi/2., holePhi, 4);
2251 mountinghole3shape->Rmin(0) = kMountingHoleRmin + kMountingHoleHight;
2252 mountinghole3shape->Rmax(0) = mountingholeshape->GetRmin(0);
2253 mountinghole3shape->Z(0) = mountingholeshape->GetZ(2);
2255 mountinghole3shape->Rmax(1) = mountinghole3shape->GetRmax(0);
2256 mountinghole3shape->Z(1) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta,
2257 mountinghole3shape->GetRmax(1));
2258 mountinghole3shape->Rmin(1) = RmaxFromZpCone(coneinsertshape,7,90.-kConeTheta,
2259 mountinghole3shape->GetZ(1));
2261 mountinghole3shape->Rmin(2) = kMountingHoleRmin;
2262 mountinghole3shape->Z(2) = mountingholeshape->Z(3);
2263 mountinghole3shape->Rmax(2) = RmaxFromZpCone(coneshape,7,90.-kConeTheta,
2264 mountinghole3shape->GetZ(2));
2266 mountinghole3shape->Rmin(3) = mountinghole3shape->Rmin(2);
2267 mountinghole3shape->Rmax(3) = mountinghole3shape->Rmin(3);
2268 mountinghole3shape->Z(3) = ZFromRmaxpCone(coneshape,7,90.-kConeTheta,
2269 mountinghole3shape->GetRmax(3));
2271 // The Cable Hole is even more complicated, a Composite Shape
2272 // is unavoidable here (gosh!)
2273 TGeoPcon *coneshapecopy = new TGeoPcon("conecopy",0.0, 360.0, 12);
2275 for (Int_t i=0; i<12; i++) {
2276 coneshapecopy->Rmin(i) = coneshape->GetRmin(i);
2277 coneshapecopy->Rmax(i) = coneshape->GetRmax(i);
2278 coneshapecopy->Z(i) = coneshape->GetZ(i);
2281 holePhi = (kCableHoleWidth/kCableHoleRout)*TMath::RadToDeg();
2282 TGeoConeSeg *chCS = new TGeoConeSeg("chCS", 0.5*kConeZLength,
2283 kCableHoleRin, kCableHoleRout,
2284 kCableHoleRin, kCableHoleRout,
2285 -0.5*holePhi, 0.5*holePhi);
2287 TGeoCompositeShape *cableholeshape = new TGeoCompositeShape(
2288 "SSDCableHoleShape",
2292 chCS->InspectShape();
2293 cableholeshape->InspectShape();
2296 // SSD Cone Wings: Tube and TubeSeg shapes
2297 Double_t angleWideWing, angleWideWingThickness;
2298 angleWideWing = (kWingWidth/kWingRmax)*TMath::RadToDeg();
2299 angleWideWingThickness = (kCFThickness/kWingRmax)*TMath::RadToDeg();
2301 TGeoTubeSeg *wingshape = new TGeoTubeSeg(kConeROuterMax, kWingRmax,
2305 TGeoTubeSeg *winginsertshape = new TGeoTubeSeg(kConeROuterMax,
2306 kWingRmax-kCFThickness,
2307 kWingHalfThick-kCFThickness,
2308 angleWideWingThickness,
2309 angleWideWing-angleWideWingThickness);
2311 // SDD support plate, SSD side (Mounting Bracket): a TubeSeg
2312 TGeoTubeSeg *bracketshape = new TGeoTubeSeg(kBracketRmin, kBracketRmax,
2313 kBracketHalfLength, -kBracketPhi/2, kBracketPhi/2);
2316 // We have the shapes: now create the real volumes
2318 TGeoVolume *cfcone = new TGeoVolume("SSDCarbonFiberCone",
2319 coneshape,medSSDcf);
2320 cfcone->SetVisibility(kTRUE);
2321 cfcone->SetLineColor(4); // Blue
2322 cfcone->SetLineWidth(1);
2323 cfcone->SetFillColor(cfcone->GetLineColor());
2324 cfcone->SetFillStyle(4000); // 0% transparent
2326 TGeoVolume *cfconeinsert = new TGeoVolume("SSDCarbonFiberConeInsert",
2327 coneinsertshape,medSSDste);
2328 cfconeinsert->SetVisibility(kTRUE);
2329 cfconeinsert->SetLineColor(2); // Red
2330 cfconeinsert->SetLineWidth(1);
2331 cfconeinsert->SetFillColor(cfconeinsert->GetLineColor());
2332 cfconeinsert->SetFillStyle(4050); // 50% transparent
2334 TGeoVolume *cfconefoam1 = new TGeoVolume("SSDCarbonFiberConeFoam1",
2335 conefoam1shape,medSSDroh);
2336 cfconefoam1->SetVisibility(kTRUE);
2337 cfconefoam1->SetLineColor(3); // Green
2338 cfconefoam1->SetLineWidth(1);
2339 cfconefoam1->SetFillColor(cfconefoam1->GetLineColor());
2340 cfconefoam1->SetFillStyle(4050); // 50% transparent
2342 TGeoVolume *cfconefoam2 = new TGeoVolume("SSDCarbonFiberConeFoam2",
2343 conefoam2shape,medSSDroh);
2344 cfconefoam2->SetVisibility(kTRUE);
2345 cfconefoam2->SetLineColor(3); // Green
2346 cfconefoam2->SetLineWidth(1);
2347 cfconefoam2->SetFillColor(cfconefoam2->GetLineColor());
2348 cfconefoam2->SetFillStyle(4050); // 50% transparent
2350 TGeoVolume *coolinghole = new TGeoVolume("SSDCoolingHole",
2351 coolingholeshape,medSSDair);
2352 coolinghole->SetVisibility(kTRUE);
2353 coolinghole->SetLineColor(5); // Yellow
2354 coolinghole->SetLineWidth(1);
2355 coolinghole->SetFillColor(coolinghole->GetLineColor());
2356 coolinghole->SetFillStyle(4090); // 90% transparent
2358 TGeoVolume *coolinghole2 = new TGeoVolume("SSDCoolingHole2",
2359 coolinghole2shape,medSSDair);
2360 coolinghole2->SetVisibility(kTRUE);
2361 coolinghole2->SetLineColor(5); // Yellow
2362 coolinghole2->SetLineWidth(1);
2363 coolinghole2->SetFillColor(coolinghole2->GetLineColor());
2364 coolinghole2->SetFillStyle(4090); // 90% transparent
2366 TGeoVolume *coolinghole3 = new TGeoVolume("SSDCoolingHole3",
2367 coolinghole3shape,medSSDair);
2368 coolinghole3->SetVisibility(kTRUE);
2369 coolinghole3->SetLineColor(5); // Yellow
2370 coolinghole3->SetLineWidth(1);
2371 coolinghole3->SetFillColor(coolinghole3->GetLineColor());
2372 coolinghole3->SetFillStyle(4090); // 90% transparent
2374 TGeoVolume *mountinghole = new TGeoVolume("SSDMountingHole",
2375 mountingholeshape,medSSDair);
2376 mountinghole->SetVisibility(kTRUE);
2377 mountinghole->SetLineColor(5); // Yellow
2378 mountinghole->SetLineWidth(1);
2379 mountinghole->SetFillColor(mountinghole->GetLineColor());
2380 mountinghole->SetFillStyle(4090); // 90% transparent
2382 TGeoVolume *mountinghole2 = new TGeoVolume("SSDMountingHole2",
2383 mountinghole2shape,medSSDair);
2384 mountinghole2->SetVisibility(kTRUE);
2385 mountinghole2->SetLineColor(5); // Yellow
2386 mountinghole2->SetLineWidth(1);
2387 mountinghole2->SetFillColor(mountinghole2->GetLineColor());
2388 mountinghole2->SetFillStyle(4090); // 90% transparent
2390 TGeoVolume *mountinghole3 = new TGeoVolume("SSDMountingHole3",
2391 mountinghole3shape,medSSDair);
2392 mountinghole3->SetVisibility(kTRUE);
2393 mountinghole3->SetLineColor(5); // Yellow
2394 mountinghole3->SetLineWidth(1);
2395 mountinghole3->SetFillColor(mountinghole3->GetLineColor());
2396 mountinghole3->SetFillStyle(4090); // 90% transparent
2398 TGeoVolume *wing = new TGeoVolume("SSDWing",wingshape,medSSDcf);
2399 wing->SetVisibility(kTRUE);
2400 wing->SetLineColor(4); // Blue
2401 wing->SetLineWidth(1);
2402 wing->SetFillColor(wing->GetLineColor());
2403 wing->SetFillStyle(4000); // 0% transparent
2405 TGeoVolume *cablehole = new TGeoVolume("SSDCableHole",
2406 cableholeshape,medSSDair);
2407 cablehole->SetVisibility(kTRUE);
2408 cablehole->SetLineColor(5); // Yellow
2409 cablehole->SetLineWidth(1);
2410 cablehole->SetFillColor(cablehole->GetLineColor());
2411 cablehole->SetFillStyle(4090); // 90% transparent
2413 TGeoVolume *winginsert = new TGeoVolume("SSDWingInsert",
2414 winginsertshape,medSSDste);
2415 winginsert->SetVisibility(kTRUE);
2416 winginsert->SetLineColor(2); // Red
2417 winginsert->SetLineWidth(1);
2418 winginsert->SetFillColor(winginsert->GetLineColor());
2419 winginsert->SetFillStyle(4050); // 50% transparent
2421 TGeoVolume *bracket = new TGeoVolume("SSDMountingBracket",
2422 bracketshape,medSSDal);
2423 bracket->SetVisibility(kTRUE);
2424 bracket->SetLineColor(6); // Purple
2425 bracket->SetLineWidth(1);
2426 bracket->SetFillColor(bracket->GetLineColor());
2427 bracket->SetFillStyle(4000); // 0% transparent
2430 for (Int_t i=0; i<(Int_t)(360./kMountingHolePhi); i++) {
2431 Double_t phiH = i*kMountingHolePhi + 0.5*kMountingHolePhi;
2432 cfconefoam2->AddNode(mountinghole,i+1, new TGeoRotation("", phiH, 0, 0));
2435 for (Int_t i=0; i<(Int_t)(360./kCoolingHolePhi); i++) {
2436 Double_t phiH = i*kCoolingHolePhi + 0.5*kCoolingHolePhi;
2437 cfconeinsert->AddNodeOverlap(coolinghole,i+1, new TGeoRotation("", phiH, 0, 0));
2440 cfconeinsert->AddNode(cfconefoam1,1,0);
2441 cfconeinsert->AddNode(cfconefoam2,1,0);
2443 cfcone->AddNode(cfconeinsert,1,0);
2445 for (Int_t i=0; i<(Int_t)(360./kCoolingHolePhi); i++) {
2446 Double_t phiH = i*kCoolingHolePhi + 0.5*kCoolingHolePhi;
2447 cfcone->AddNode(coolinghole2,i+1, new TGeoRotation("", phiH, 0, 0));
2448 cfcone->AddNode(coolinghole3,i+1, new TGeoRotation("", phiH, 0, 0));
2449 cfcone->AddNodeOverlap(cablehole,i+1, new TGeoRotation("", phiH, 0, 0));
2452 for (Int_t i=0; i<(Int_t)(360./kMountingHolePhi); i++) {
2453 Double_t phiH = i*kMountingHolePhi + 0.5*kMountingHolePhi;
2454 cfcone->AddNode(mountinghole2,i+1, new TGeoRotation("", phiH, 0, 0));
2455 cfcone->AddNode(mountinghole3,i+1, new TGeoRotation("", phiH, 0, 0));
2458 wing->AddNode(winginsert,1,0);
2460 // Add all volumes in the Cone assembly
2461 vC->AddNode(cfcone,1,new TGeoTranslation(0,0,-kConeZPosition));
2463 for (Int_t i=0; i<4; i++) {
2464 Double_t thetaW = kThetaWing + 90.*i + angleWideWing/2.;
2465 vC->AddNode(wing, i+1, new TGeoCombiTrans(0, 0, -kConeZPosition+kWingHalfThick,
2466 new TGeoRotation("",thetaW,180,0)));
2469 Double_t zBracket = kConeZPosition - coneshape->GetZ(9) +
2470 2*bracketshape->GetDz();
2471 for (Int_t i=0; i<3; i++) {
2472 Double_t thetaB = 60 + 120.*i;
2473 vC->AddNode(bracket, i+1, new TGeoCombiTrans(0, 0, -zBracket,
2474 new TGeoRotation("",thetaB,0,0)));
2477 // Finally put everything in the mother volume
2478 moth->AddNode(cfcylinder,1,0);
2480 moth->AddNode(vC, 1, 0 );
2481 moth->AddNode(vC, 2, new TGeoRotation("",180, 180, 0) );
2483 // Some debugging if requested
2492 //______________________________________________________________________
2493 void AliITSv11GeometrySupport::ServicesCableSupport(TGeoVolume *moth,
2496 // Creates the cable trays which are outside the ITS support cones
2497 // but still inside the TPC
2498 // This is now a stearing routine, the actual work is done by three
2499 // specialized methods to avoid a really huge unique method
2502 // moth : the TGeoVolume owing the volume structure
2503 // mgr : the GeoManager (default gGeoManager)
2506 // Created: 15 Nov 2009 Mario Sitta
2509 TraySupportsSideA(moth, mgr);
2511 ServicesCableSupportSPD(moth, mgr);
2512 ServicesCableSupportSDD(moth, mgr);
2513 ServicesCableSupportSSD(moth, mgr);
2518 //______________________________________________________________________
2519 void AliITSv11GeometrySupport::TraySupportsSideA(TGeoVolume *moth,
2522 // Creates the structure supporting the ITS cable trays on Side A
2525 // moth : the TGeoVolume owing the volume structure
2526 // mgr : the GeoManager (default gGeoManager)
2529 // Created: 14 Dec 2009 Mario Sitta
2530 // Updated: 26 Feb 2010 Mario Sitta
2532 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
2533 // drawings and other (oral) information given by F.Tosello
2536 // Dimensions and positions of the A-Side Cable Tray Support Ring
2538 const Double_t kSuppRingYTrans = 110.00 *fgkmm;
2539 const Double_t kSuppRingZTrans =(1011.00+435.00) *fgkmm;
2540 const Double_t kSuppForwYTrans = 185.00 *fgkmm;
2542 const Double_t kExtSuppRingSpace1 = 33.00 *fgkmm;
2543 const Double_t kExtSuppRingSpace2 = 45.00 *fgkmm;
2544 const Double_t kExtSuppRingSpcAbov = 30.00 *fgkmm;
2545 const Double_t kExtSuppRingBase = 491.50 *fgkmm;
2546 const Double_t kExtSuppRingInward = 35.00 *fgkmm;
2547 const Double_t kExtSuppRingRmax = 540.00 *fgkmm;
2548 const Double_t kExtSuppRingRint1 = 465.00 *fgkmm;
2549 const Double_t kExtSuppRingRint2 = 467.00 *fgkmm;
2550 const Double_t kExtSuppRingInnerHi = 450.00 *fgkmm;
2551 const Double_t kExtSuppRingInWide = 100.00 *fgkmm;
2552 const Double_t kExtSuppRingR7 = 7.00 *fgkmm;
2553 const Double_t kExtSuppRingR5 = 5.00 *fgkmm;
2554 const Double_t kExtSuppRingThick = 20.00 *fgkmm;
2556 const Double_t kExtSuppRingSpcAng = 10.50 *TMath::DegToRad();
2557 const Double_t kExtSuppRingPartPhi = 15.00 *TMath::DegToRad();
2558 const Double_t kExtSuppRingIntAng = 7.00 *TMath::DegToRad();
2559 const Double_t kExtSuppRingBaseAng = 75.00 *TMath::DegToRad();
2560 const Double_t kExtSuppRingR7Ang = 100.00 *TMath::DegToRad(); // Guessed
2562 const Int_t kExtSuppRingNPtsArc = 10; // N.points to approximate arc
2564 const Double_t kIntSuppRingThick1 = 15.00 *fgkmm;
2565 const Double_t kIntSuppRingThick2 = 13.00 *fgkmm;
2566 const Double_t kIntSuppRingInward = 24.00 *fgkmm;
2567 const Double_t kIntSuppRingThick = 20.00 *fgkmm;
2569 const Double_t kSuppCylHeight = 340.00 *fgkmm;
2570 const Double_t kSuppCylRint = 475.00 *fgkmm;
2571 const Double_t kSuppCylRext = 478.00 *fgkmm;
2572 const Double_t kSuppCylDispl = 137.70 *fgkmm;
2574 const Double_t kSuppSpacerHeight = 30.00 *fgkmm;
2575 const Double_t kSuppSpacerThick = 10.00 *fgkmm;
2577 const Double_t kSuppSpacerAngle = 15.00; // Degrees
2579 const Double_t kSuppForwRingRint1 = 500.00 *fgkmm;
2580 const Double_t kSuppForwRingRint2 = 540.00 *fgkmm;
2581 const Double_t kSuppForwRingRext = 560.00 *fgkmm;
2582 const Double_t kSuppForwRingThikAll = 50.00 *fgkmm;
2583 const Double_t kSuppForwRingThikInt = 20.00 *fgkmm;
2586 const Double_t kSuppForwConeRmin = 558.00 *fgkmm;
2587 const Double_t kSuppForwConeRmax = 681.00 *fgkmm;
2588 const Double_t kSuppForwConeLen1 = 318.00 *fgkmm;
2589 const Double_t kSuppForwConeLen2 = 662.00 *fgkmm;
2590 const Double_t kSuppForwConeThick = 3.00 *fgkmm;
2592 const Double_t kSuppBackRingPlacTop = 90.00 *fgkmm;
2593 const Double_t kSuppBackRingPlacSid = 50.00 *fgkmm;
2594 const Double_t kSuppBackRingHeight = 760.00 *fgkmm;
2595 const Double_t kSuppBackRingRext = 760.00 *fgkmm;
2596 const Double_t kSuppBackRingRint = 685.00 *fgkmm;
2597 // const Double_t kSuppBackRingRint2 = 675.00 *fgkmm;
2598 const Double_t kSuppBackRingR10 = 10.00 *fgkmm;
2599 const Double_t kSuppBackRingBase = 739.00 *fgkmm;
2600 const Double_t kSuppBackRingThikAll = 50.00 *fgkmm;
2601 const Double_t kSuppBackRingThick1 = 20.00 *fgkmm;
2602 const Double_t kSuppBackRingThick2 = 20.00 *fgkmm;
2604 // const Double_t kSuppBackRingPlacAng = 10.00 *TMath::DegToRad();
2605 const Double_t kSuppBackRingPlacAng = 10.25 *TMath::DegToRad();//Fix ovlp.
2606 const Double_t kSuppBackRing2ndAng1 = 78.40 *TMath::DegToRad();
2607 const Double_t kSuppBackRing2ndAng2 = 45.00 *TMath::DegToRad();
2609 const Int_t kSuppBackRingNPtsArc = 10; // N.points to approximate arc
2612 const Double_t kRearSuppZTransGlob =(1011.00+9315.00-6040.00) *fgkmm;
2613 const Double_t kBackRodZTrans = 2420.00 *fgkmm;
2615 const Double_t kBackRodLength = 1160.00 *fgkmm;
2616 const Double_t kBackRodThickLen = 20.00 *fgkmm;
2617 const Double_t kBackRodDiameter = 20.00 *fgkmm;
2619 const Double_t kSuppRearRingRint = 360.00 *fgkmm;
2620 const Double_t kSuppRearRingRext1 = 410.00 *fgkmm;
2621 const Double_t kSuppRearRingRext2 = 414.00 *fgkmm;
2622 const Double_t kSuppRearRingHeight = 397.00 *fgkmm;
2623 const Double_t kSuppRearRingTopWide = 111.87 *fgkmm;
2624 const Double_t kSuppRearRingBase = 451.50 *fgkmm;
2625 const Double_t kSuppRearRingBaseHi = 58.00 *fgkmm;
2626 const Double_t kSuppRearRingSideHi = 52.00 *fgkmm;
2627 const Double_t kSuppRearRingInside = 40.00 *fgkmm;
2628 const Double_t kSuppRearRingInsideHi= 12.00 *fgkmm;
2629 const Double_t kSuppRearRingThick = 20.00 *fgkmm;
2630 const Double_t kSuppRearRingXRodHole= 441.50 *fgkmm;
2631 const Double_t kSuppRearRingYRodHole= 42.00 *fgkmm;
2633 const Double_t kSuppRearRing1stAng = 22.00 *TMath::DegToRad();
2634 const Double_t kSuppRearRingStepAng = 15.00 *TMath::DegToRad();
2636 const Int_t kSuppRearRingNPtsArc = 10; // N.points to approximate arc
2640 Double_t xprof[2*(15+kExtSuppRingNPtsArc)],yprof[2*(15+kExtSuppRingNPtsArc)];
2641 Double_t slp1, slp2, phi, xm, ym;
2642 Double_t xloc, yloc, zloc, rmin, rmax, deltaR;
2646 // The whole support as an assembly
2647 TGeoVolumeAssembly *trayASuppStruct = new TGeoVolumeAssembly("ITSsuppSideAStructure");
2650 // First create all needed shapes
2652 // The External Ring (part of 0872/G/A/01): a really complex Xtru
2653 TGeoXtru *extSuppRing = new TGeoXtru(2);
2655 // First the upper notch...
2656 xprof[ 0] = kExtSuppRingSpace1;
2657 yprof[ 0] = kExtSuppRingInnerHi + kExtSuppRingSpcAbov;
2659 slp1 = TMath::Tan(TMath::Pi()/2 - kExtSuppRingSpcAng);
2660 IntersectCircle(slp1, xprof[0], yprof[0], kExtSuppRingRmax, 0., 0.,
2661 xprof[5], yprof[5], xm, ym); // Ignore dummy xm,ym
2663 xprof[ 4] = xprof[5];
2664 yprof[ 4] = yprof[5] - kExtSuppRingR5/TMath::Tan(kExtSuppRingSpcAng);
2665 xprof[ 3] = xprof[4] - kExtSuppRingR5*(1 - TMath::Cos(TMath::Pi()/6));
2666 yprof[ 3] = yprof[4] - kExtSuppRingR5*( TMath::Sin(TMath::Pi()/6));
2667 xprof[ 2] = xprof[4] - kExtSuppRingR5*(1 - TMath::Cos(TMath::Pi()/3));
2668 yprof[ 2] = yprof[4] - kExtSuppRingR5*( TMath::Sin(TMath::Pi()/3));
2669 xprof[ 1] = xprof[4] - kExtSuppRingR5;
2670 yprof[ 1] = yprof[4] - kExtSuppRingR5;
2672 Int_t indx = 5+kExtSuppRingNPtsArc;
2673 // ...then the external arc, approximated with segments,...
2674 xprof[indx] = kExtSuppRingBase;
2675 yprof[indx] = TMath::Sqrt(kExtSuppRingRmax*kExtSuppRingRmax -
2676 kExtSuppRingBase*kExtSuppRingBase);
2677 Double_t alphamin = TMath::ASin(kExtSuppRingSpace2/kExtSuppRingRmax);
2678 Double_t alphamax = TMath::Pi()/2 -
2679 TMath::ASin(yprof[5+kExtSuppRingNPtsArc]/kExtSuppRingRmax);
2681 for (Int_t jp = 1; jp < kExtSuppRingNPtsArc; jp++) {
2682 Double_t alpha = jp*(alphamax-alphamin)/kExtSuppRingNPtsArc;
2683 xprof[5+jp] = kExtSuppRingRmax*TMath::Sin(alpha);
2684 yprof[5+jp] = kExtSuppRingRmax*TMath::Cos(alpha);
2686 // ...and finally the interior profile
2687 xprof[indx+1] = kExtSuppRingBase;
2688 yprof[indx+1] = kSuppRingYTrans;
2689 xprof[indx+2] = xprof[indx+1] - kExtSuppRingInward;
2690 yprof[indx+2] = yprof[indx+1];
2692 phi = TMath::Pi()/2 - 4*kExtSuppRingPartPhi - kExtSuppRingIntAng;
2693 slp1 = TMath::Tan(TMath::Pi() - kExtSuppRingBaseAng);
2694 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2695 xm = kExtSuppRingRint2*TMath::Cos(phi);
2696 ym = kExtSuppRingRint2*TMath::Sin(phi);
2697 IntersectLines(slp1, xprof[indx+2], yprof[indx+2], slp2, xm, ym,
2698 xprof[indx+3], yprof[indx+3]);
2701 phi += kExtSuppRingPartPhi;
2702 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2703 xm = kExtSuppRingRint1*TMath::Cos(phi);
2704 ym = kExtSuppRingRint1*TMath::Sin(phi);
2705 IntersectLines(slp1, xprof[indx+3], yprof[indx+3], slp2, xm, ym,
2706 xprof[indx+4], yprof[indx+4]);
2709 phi += kExtSuppRingPartPhi;
2710 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2711 xm = kExtSuppRingRint2*TMath::Cos(phi);
2712 ym = kExtSuppRingRint2*TMath::Sin(phi);
2713 IntersectLines(slp1, xprof[indx+4], yprof[indx+4], slp2, xm, ym,
2714 xprof[indx+5], yprof[indx+5]);
2717 phi += kExtSuppRingPartPhi;
2718 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2719 xm = kExtSuppRingRint1*TMath::Cos(phi);
2720 ym = kExtSuppRingRint1*TMath::Sin(phi);
2721 IntersectLines(slp1, xprof[indx+5], yprof[indx+5], slp2, xm, ym,
2722 xprof[indx+6], yprof[indx+6]);
2724 xprof[indx+9] = kExtSuppRingInWide;
2725 yprof[indx+9] = kExtSuppRingInnerHi;
2726 xprof[indx+8] = xprof[indx+9] +
2727 (1 - TMath::Cos(kExtSuppRingR7Ang/2))*kExtSuppRingR7;
2728 yprof[indx+8] = yprof[indx+9] +
2729 ( TMath::Sin(kExtSuppRingR7Ang/2))*kExtSuppRingR7;
2730 xprof[indx+7] = xprof[indx+9] +
2731 (1 + TMath::Cos(kExtSuppRingR7Ang ))*kExtSuppRingR7;
2732 yprof[indx+7] = yprof[indx+9] +
2733 ( TMath::Sin(kExtSuppRingR7Ang ))*kExtSuppRingR7;
2734 // Gosh, we did the right side! now reflex on the left side
2735 npoints = (sizeof(xprof)/sizeof(Double_t))/2;
2736 for (Int_t jp = 0; jp < npoints; jp++) {
2737 xprof[npoints+jp] = -xprof[npoints-1-jp];
2738 yprof[npoints+jp] = yprof[npoints-1-jp];
2740 // wow! now the actual Xtru
2741 extSuppRing->DefinePolygon(2*npoints, xprof, yprof);
2742 extSuppRing->DefineSection(0,0);
2743 extSuppRing->DefineSection(1,kExtSuppRingThick);
2745 // The Internal Ring (part of 0872/G/A/01): another complex Xtru
2746 TGeoXtru *intSuppRing = new TGeoXtru(2);
2748 // First the external profile...
2752 phi = TMath::Pi()/2 - kExtSuppRingPartPhi - kExtSuppRingIntAng;
2753 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2754 xm = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Cos(phi);
2755 ym = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Sin(phi);
2756 IntersectLines(slp1, 0, kExtSuppRingInnerHi+kExtSuppRingSpcAbov,
2758 xprof[npoints], yprof[npoints]);
2762 phi -= kExtSuppRingPartPhi;
2763 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2764 xm = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Cos(phi);
2765 ym = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Sin(phi);
2766 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2768 xprof[npoints], yprof[npoints]);
2772 phi -= kExtSuppRingPartPhi;
2773 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2774 xm = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Cos(phi);
2775 ym = (kExtSuppRingRint1+kIntSuppRingThick1)*TMath::Sin(phi);
2776 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2778 xprof[npoints], yprof[npoints]);
2782 phi -= kExtSuppRingPartPhi;
2783 slp2 = TMath::Tan(TMath::Pi()/2 + phi);
2784 xm = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Cos(phi);
2785 ym = (kExtSuppRingRint2+kIntSuppRingThick2)*TMath::Sin(phi);
2786 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2788 xprof[npoints], yprof[npoints]);
2791 xprof[npoints] = kExtSuppRingBase-kIntSuppRingInward;
2792 yprof[npoints] = Yfrom2Points(xprof[npoints-1], yprof[npoints-1], xm, ym,
2796 xprof[npoints] = xprof[npoints-1];
2797 yprof[npoints] = kSuppRingYTrans;
2799 // ...and then the interior profile, which is identical to extSuppRing one
2800 for (Int_t jp=0; jp < 8; jp++) {
2801 xprof[npoints] = extSuppRing->GetX(17+jp);
2802 yprof[npoints] = extSuppRing->GetY(17+jp);
2805 // We did the right side! now reflex on the left side
2806 for (Int_t jp = 0; jp < npoints; jp++) {
2807 xprof[npoints+jp] = -xprof[npoints-1-jp];
2808 yprof[npoints+jp] = yprof[npoints-1-jp];
2810 // And now the actual Xtru
2811 intSuppRing->DefinePolygon(2*npoints, xprof, yprof);
2812 intSuppRing->DefineSection(0,0);
2813 intSuppRing->DefineSection(1,kIntSuppRingThick);
2815 // The intermediate cylinder (0872/G/A/03): a TubeSeg
2816 alphamin = TMath::ASin(kSuppCylDispl/kSuppCylRint)*TMath::RadToDeg();
2817 alphamax = 180 - alphamin;
2818 TGeoTubeSeg *interCylind = new TGeoTubeSeg(kSuppCylRint, kSuppCylRext,
2819 kSuppCylHeight/2, alphamin, alphamax);
2821 // The spacer (0872/G/A/03): a simple Xtru
2822 TGeoXtru *suppSpacer = new TGeoXtru(2);
2824 xprof[0] = kSuppSpacerHeight;
2825 yprof[0] = kSuppSpacerThick;
2826 xprof[1] = xprof[0];
2830 xprof[3] = kSuppSpacerThick*SinD(kSuppSpacerAngle);
2831 yprof[3] = yprof[0];
2833 suppSpacer->DefinePolygon(4, xprof, yprof);
2834 suppSpacer->DefineSection(0,-kSuppCylHeight/2);
2835 suppSpacer->DefineSection(1, kSuppCylHeight/2);
2837 // The forward ring (0872/G/B/02): a Pcon (slight oversimplification)
2838 Double_t rmean = (kSuppForwRingRint1+kSuppForwRingRext)/2;
2839 alphamin = TMath::ASin(kSuppForwYTrans/rmean)*TMath::RadToDeg();
2840 alphamax = 180 - alphamin;
2842 TGeoPcon *forwardRing = new TGeoPcon(alphamin,alphamax-alphamin,4);
2844 forwardRing->DefineSection(0,0,
2845 kSuppForwRingRint1,kSuppForwRingRext);
2846 forwardRing->DefineSection(1,kSuppForwRingThikInt,
2847 kSuppForwRingRint1,kSuppForwRingRext);
2848 forwardRing->DefineSection(2,kSuppForwRingThikInt,
2849 kSuppForwRingRint2,kSuppForwRingRext);
2850 forwardRing->DefineSection(3,kSuppForwRingThikAll,
2851 kSuppForwRingRint2,kSuppForwRingRext);
2853 // The forward cone (0872/G/B/03): a TGeoPcon
2854 TGeoPcon *forwardCone = new TGeoPcon(alphamin,alphamax-alphamin,3);
2856 forwardCone->DefineSection(0,0,
2857 kSuppForwConeRmin-kSuppForwConeThick,
2859 forwardCone->DefineSection(1,kSuppForwConeLen1,
2860 kSuppForwConeRmin-kSuppForwConeThick,
2862 forwardCone->DefineSection(2,kSuppForwConeLen1+kSuppForwConeLen2,
2863 kSuppForwConeRmax-kSuppForwConeThick,
2866 // The first part of the Back Ring (part of 0872/G/B/01): a complex Xtru
2867 TGeoXtru *firstSuppBackRing = new TGeoXtru(2);
2869 // First the external profile... (the arc is approximated with segments)
2872 xprof[npoints] = kSuppBackRingPlacTop;
2873 yprof[npoints] = kSuppBackRingHeight;
2876 alphamax = TMath::Pi()/2 - TMath::ASin(kSuppBackRingPlacTop/kSuppBackRingRext);
2877 alphamin = TMath::ASin((kSuppForwYTrans+kSuppBackRingPlacSid)/kSuppBackRingRext);
2879 xprof[npoints] = xprof[npoints-1];
2880 yprof[npoints] = kSuppBackRingRext*TMath::Sin(alphamax);
2883 for (Int_t jp = 1; jp <= kSuppBackRingNPtsArc; jp++) {
2884 Double_t alpha = alphamax - jp*(alphamax-alphamin)/kSuppBackRingNPtsArc;
2885 xprof[npoints] = kSuppBackRingRext*TMath::Cos(alpha);
2886 yprof[npoints] = kSuppBackRingRext*TMath::Sin(alpha);
2890 xprof[npoints] = kSuppBackRingBase -
2891 kSuppBackRingPlacSid*TMath::Tan(kSuppBackRingPlacAng);
2892 yprof[npoints] = yprof[npoints-1];
2895 xprof[npoints] = kSuppBackRingBase;
2896 yprof[npoints] = kSuppForwYTrans;
2898 // ...then the internal profile (the arc is approximated with segments)
2899 alphamin = TMath::ASin(kSuppForwYTrans/kSuppBackRingRint);
2900 alphamax = TMath::Pi()/2;
2902 for (Int_t jp = 0; jp < kSuppBackRingNPtsArc; jp++) {
2903 Double_t alpha = alphamin + jp*(alphamax-alphamin)/kSuppBackRingNPtsArc;
2904 xprof[npoints] = kSuppBackRingRint*TMath::Cos(alpha);
2905 yprof[npoints] = kSuppBackRingRint*TMath::Sin(alpha);
2910 yprof[npoints] = kSuppBackRingRint;
2912 // We did the right side! now reflex on the left side (except last point)
2913 for (Int_t jp = 0; jp < npoints-1; jp++) {
2914 xprof[npoints+jp] = -xprof[npoints-jp-2];
2915 yprof[npoints+jp] = yprof[npoints-jp-2];
2917 // And now the actual Xtru
2918 firstSuppBackRing->DefinePolygon(2*npoints-1, xprof, yprof);
2919 firstSuppBackRing->DefineSection(0,0);
2920 firstSuppBackRing->DefineSection(1,kSuppBackRingThick1);
2922 // The second part of the Back Ring (part of 0872/G/B/01): a Pcon
2923 // (slight oversimplification)
2924 alphamin = TMath::ASin(kSuppForwYTrans/kSuppBackRingRint)*TMath::RadToDeg();
2925 alphamax = 180 - alphamin;
2927 TGeoPcon *secondSuppBackRing = new TGeoPcon(alphamin,alphamax-alphamin,6);
2929 deltaR = kSuppBackRingThick2/TMath::Sin(kSuppBackRing2ndAng1);
2930 rmin = kSuppBackRingRint - kSuppBackRingThick1/TMath::Tan(kSuppBackRing2ndAng1);
2931 rmax = rmin + deltaR + kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1);
2932 secondSuppBackRing->DefineSection(0, 0, rmin, rmax);
2934 zloc = kSuppBackRingR10*(1 - TMath::Cos(kSuppBackRing2ndAng1/3));
2935 rmax -= kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1/3);
2936 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2937 secondSuppBackRing->DefineSection(1, zloc, rmin, rmax);
2939 zloc = kSuppBackRingR10*(1 - TMath::Cos(kSuppBackRing2ndAng1*2/3));
2940 rmax = secondSuppBackRing->GetRmax(0) - kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1*2/3);
2941 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2942 secondSuppBackRing->DefineSection(2, zloc, rmin, rmax);
2944 zloc = kSuppBackRingR10*(1 - TMath::Cos(kSuppBackRing2ndAng1));
2945 rmax = secondSuppBackRing->GetRmax(0) - kSuppBackRingR10*TMath::Sin(kSuppBackRing2ndAng1);
2946 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2947 secondSuppBackRing->DefineSection(3, zloc, rmin, rmax);
2949 slp1 = TMath::Tan(kSuppBackRing2ndAng2);
2950 slp2 = TMath::Tan(TMath::Pi()/2 + kSuppBackRing2ndAng1);
2951 IntersectLines(-slp1,kSuppBackRingThikAll,deltaR/2,
2952 slp2,kSuppBackRingThikAll,deltaR,
2955 zloc = xm - kSuppBackRingThick1;
2956 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2957 rmax = rmin + deltaR;
2958 secondSuppBackRing->DefineSection(4, zloc, rmin, rmax);
2960 zloc = kSuppBackRingThikAll - kSuppBackRingThick1;
2961 rmin = secondSuppBackRing->GetRmin(0) - zloc/TMath::Tan(kSuppBackRing2ndAng1);
2962 rmax = rmin + deltaR/2;
2963 secondSuppBackRing->DefineSection(5, zloc, rmin, rmax);
2965 // The supporting rod: a Tube
2966 TGeoTube *suppRod = new TGeoTube(0, kBackRodDiameter/2,
2967 (kBackRodLength - kBackRodThickLen)/2);
2969 // The Back Ring (0872/G/C/01): another complex Xtru
2970 TGeoXtru *suppRearRing = new TGeoXtru(2);
2972 // First the external profile...
2975 xprof[npoints] = kSuppRearRingTopWide;
2976 yprof[npoints] = kSuppRearRingHeight;
2979 phi = kSuppRearRing1stAng;
2980 slp1 = TMath::Tan(TMath::Pi() - phi);
2981 phi += kSuppRearRingStepAng;
2982 slp2 = TMath::Tan(TMath::Pi() - phi);
2983 xm = kSuppRearRingRext2*TMath::Sin(phi);
2984 ym = kSuppRearRingRext2*TMath::Cos(phi);
2985 IntersectLines(slp1, kSuppRearRingTopWide, kSuppRearRingHeight,
2987 xprof[npoints], yprof[npoints]);
2991 phi += kSuppRearRingStepAng;
2992 slp2 = TMath::Tan(TMath::Pi() - phi);
2993 xm = kSuppRearRingRext1*TMath::Sin(phi);
2994 ym = kSuppRearRingRext1*TMath::Cos(phi);
2995 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
2997 xprof[npoints], yprof[npoints]);
3001 phi += kSuppRearRingStepAng;
3002 slp2 = TMath::Tan(TMath::Pi() - phi);
3003 xm = kSuppRearRingRext2*TMath::Sin(phi);
3004 ym = kSuppRearRingRext2*TMath::Cos(phi);
3005 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
3007 xprof[npoints], yprof[npoints]);
3012 xm = kSuppRearRingBase;
3013 ym = kSuppRearRingBaseHi + kSuppRearRingSideHi;
3014 IntersectLines(slp1, xprof[npoints-1], yprof[npoints-1],
3016 xprof[npoints], yprof[npoints]);
3019 xprof[npoints] = kSuppRearRingBase;
3020 yprof[npoints] = kSuppRearRingBaseHi + kSuppRearRingSideHi;
3022 xprof[npoints] = xprof[npoints - 1];
3023 yprof[npoints] = kSuppRearRingBaseHi;
3025 xprof[npoints] = xprof[npoints - 1] - kSuppRearRingInside;
3026 yprof[npoints] = yprof[npoints - 1];
3028 xprof[npoints] = xprof[npoints - 1];
3029 yprof[npoints] = yprof[npoints - 1] + kSuppRearRingInsideHi;
3031 // ...then the internal arc, approximated with segments,...
3032 xprof[npoints] = kSuppRearRingRint;
3033 yprof[npoints] = yprof[npoints - 1];
3035 alphamin = TMath::ASin(kSuppRearRingBaseHi/kSuppRearRingRint);
3036 alphamax = TMath::Pi()/2;
3038 for (Int_t jp = 1; jp < kSuppRearRingNPtsArc; jp++) {
3039 Double_t alpha = alphamin + jp*(alphamax-alphamin)/kSuppRearRingNPtsArc;
3040 xprof[npoints+jp] = kSuppRearRingRint*TMath::Cos(alpha);
3041 yprof[npoints+jp] = kSuppRearRingRint*TMath::Sin(alpha);
3044 xprof[npoints+kSuppRearRingNPtsArc] = 0;
3045 yprof[npoints+kSuppRearRingNPtsArc] = kSuppRearRingRint;
3046 // We did the right side! now reflex on the left side
3047 Int_t nTotalPoints = npoints+kSuppRearRingNPtsArc;
3048 for (Int_t jp = 0; jp < nTotalPoints; jp++) {
3049 xprof[nTotalPoints+1+jp] = -xprof[nTotalPoints-1-jp];
3050 yprof[nTotalPoints+1+jp] = yprof[nTotalPoints-1-jp];
3053 // And now the actual Xtru
3054 suppRearRing->DefinePolygon(2*nTotalPoints+1, xprof, yprof);
3055 suppRearRing->DefineSection(0,0);
3056 suppRearRing->DefineSection(1,kSuppRearRingThick);
3059 // We have all shapes: now create the real volumes
3060 TGeoMedium *medAl = mgr->GetMedium("ITS_ANTICORODAL$");
3062 TGeoVolume *sideAExtSuppRing = new TGeoVolume("ITSsuppSideAExtSuppRing",
3063 extSuppRing, medAl);
3065 sideAExtSuppRing->SetVisibility(kTRUE);
3066 sideAExtSuppRing->SetLineColor(kMagenta+1);
3067 sideAExtSuppRing->SetLineWidth(1);
3068 sideAExtSuppRing->SetFillColor(sideAExtSuppRing->GetLineColor());
3069 sideAExtSuppRing->SetFillStyle(4000); // 0% transparent
3071 TGeoVolume *sideAIntSuppRing = new TGeoVolume("ITSsuppSideAIntSuppRing",
3072 intSuppRing, medAl);
3074 sideAIntSuppRing->SetVisibility(kTRUE);
3075 sideAIntSuppRing->SetLineColor(kMagenta+1);
3076 sideAIntSuppRing->SetLineWidth(1);
3077 sideAIntSuppRing->SetFillColor(sideAIntSuppRing->GetLineColor());
3078 sideAIntSuppRing->SetFillStyle(4000); // 0% transparent
3080 TGeoVolume *sideASuppCyl = new TGeoVolume("ITSsuppSideASuppCyl",
3081 interCylind, medAl);
3083 sideASuppCyl->SetVisibility(kTRUE);
3084 sideASuppCyl->SetLineColor(kMagenta+1);
3085 sideASuppCyl->SetLineWidth(1);
3086 sideASuppCyl->SetFillColor(sideASuppCyl->GetLineColor());
3087 sideASuppCyl->SetFillStyle(4000); // 0% transparent
3089 TGeoVolume *sideASuppSpacer = new TGeoVolume("ITSsuppSideASuppSpacer",
3092 sideASuppSpacer->SetVisibility(kTRUE);
3093 sideASuppSpacer->SetLineColor(kMagenta+1);
3094 sideASuppSpacer->SetLineWidth(1);
3095 sideASuppSpacer->SetFillColor(sideASuppSpacer->GetLineColor());
3096 sideASuppSpacer->SetFillStyle(4000); // 0% transparent
3098 TGeoVolume *sideASuppForwRing = new TGeoVolume("ITSsuppSideASuppForwRing",
3099 forwardRing, medAl);
3101 sideASuppForwRing->SetVisibility(kTRUE);
3102 sideASuppForwRing->SetLineColor(kMagenta+1);
3103 sideASuppForwRing->SetLineWidth(1);
3104 sideASuppForwRing->SetFillColor(sideASuppForwRing->GetLineColor());
3105 sideASuppForwRing->SetFillStyle(4000); // 0% transparent
3107 TGeoVolume *sideASuppForwCone = new TGeoVolume("ITSsuppSideASuppForwCone",
3108 forwardCone, medAl);
3110 sideASuppForwCone->SetVisibility(kTRUE);
3111 sideASuppForwCone->SetLineColor(kMagenta+1);
3112 sideASuppForwCone->SetLineWidth(1);
3113 sideASuppForwCone->SetFillColor(sideASuppForwCone->GetLineColor());
3114 sideASuppForwCone->SetFillStyle(4000); // 0% transparent
3116 TGeoVolume *sideAFirstSuppBackRing = new TGeoVolume("ITSsuppSideAFirstSuppBackRing",
3117 firstSuppBackRing, medAl);
3119 sideAFirstSuppBackRing->SetVisibility(kTRUE);
3120 sideAFirstSuppBackRing->SetLineColor(kMagenta+1);
3121 sideAFirstSuppBackRing->SetLineWidth(1);
3122 sideAFirstSuppBackRing->SetFillColor(sideAFirstSuppBackRing->GetLineColor());
3123 sideAFirstSuppBackRing->SetFillStyle(4000); // 0% transparent
3125 TGeoVolume *sideASecondSuppBackRing = new TGeoVolume("ITSsuppSideASecondSuppBackRing",
3126 secondSuppBackRing, medAl);
3128 sideASecondSuppBackRing->SetVisibility(kTRUE);
3129 sideASecondSuppBackRing->SetLineColor(kMagenta+1);
3130 sideASecondSuppBackRing->SetLineWidth(1);
3131 sideASecondSuppBackRing->SetFillColor(sideASecondSuppBackRing->GetLineColor());
3132 sideASecondSuppBackRing->SetFillStyle(4000); // 0% transparent
3134 TGeoVolume *sideASuppRod = new TGeoVolume("ITSsuppSideASuppRod",
3137 sideASuppRod->SetVisibility(kTRUE);
3138 sideASuppRod->SetLineColor(kMagenta+1);
3139 sideASuppRod->SetLineWidth(1);
3140 sideASuppRod->SetFillColor(sideASuppRod->GetLineColor());
3141 sideASuppRod->SetFillStyle(4000); // 0% transparent
3143 TGeoVolume *sideASuppRearRing = new TGeoVolume("ITSsuppSideASuppRearRing",
3144 suppRearRing, medAl);
3146 sideASuppRearRing->SetVisibility(kTRUE);
3147 sideASuppRearRing->SetLineColor(kMagenta+1);
3148 sideASuppRearRing->SetLineWidth(1);
3149 sideASuppRearRing->SetFillColor(sideASuppRearRing->GetLineColor());
3150 sideASuppRearRing->SetFillStyle(4000); // 0% transparent
3153 // Now build up the support structure
3154 zloc = kSuppRingZTrans;
3155 trayASuppStruct->AddNode(sideAExtSuppRing, 1,
3156 new TGeoTranslation(0, 0, zloc) );
3157 trayASuppStruct->AddNode(sideAExtSuppRing, 2,
3158 new TGeoCombiTrans( 0, 0, zloc,
3159 new TGeoRotation("",180,0,0)));
3161 zloc += kExtSuppRingThick;
3162 trayASuppStruct->AddNode(sideAIntSuppRing, 1,
3163 new TGeoTranslation(0, 0, zloc) );
3164 trayASuppStruct->AddNode(sideAIntSuppRing, 2,
3165 new TGeoCombiTrans( 0, 0, zloc,
3166 new TGeoRotation("",180,0,0)));
3168 xloc = kExtSuppRingBase - kIntSuppRingInward;
3169 yloc = kSuppRingYTrans;
3170 zloc += (kIntSuppRingThick + kSuppCylHeight/2);
3171 trayASuppStruct->AddNode(sideASuppCyl, 1,
3172 new TGeoTranslation(0, 0, zloc) );
3173 trayASuppStruct->AddNode(sideASuppCyl, 2,
3174 new TGeoCombiTrans( 0, 0, zloc,
3175 new TGeoRotation("",180,0,0)));
3176 trayASuppStruct->AddNode(sideASuppSpacer, 1,
3177 new TGeoCombiTrans( xloc, yloc, zloc,
3178 new TGeoRotation("",90+kSuppSpacerAngle,0,0)));
3179 trayASuppStruct->AddNode(sideASuppSpacer, 2,
3180 new TGeoCombiTrans(-xloc, yloc, zloc,
3181 new TGeoRotation("",0,180,kSuppSpacerAngle-90)));
3182 trayASuppStruct->AddNode(sideASuppSpacer, 3,
3183 new TGeoCombiTrans( xloc,-yloc, zloc,
3184 new TGeoRotation("",180,180,kSuppSpacerAngle-90)));
3185 trayASuppStruct->AddNode(sideASuppSpacer, 4,
3186 new TGeoCombiTrans(-xloc,-yloc, zloc,
3187 new TGeoRotation("",270+kSuppSpacerAngle,0,0)));
3190 zloc += kSuppCylHeight/2;
3191 trayASuppStruct->AddNode(sideAIntSuppRing, 3,
3192 new TGeoTranslation(0, 0, zloc) );
3193 trayASuppStruct->AddNode(sideAIntSuppRing, 4,
3194 new TGeoCombiTrans( 0, 0, zloc,
3195 new TGeoRotation("",180,0,0)));
3197 zloc += kIntSuppRingThick;
3198 trayASuppStruct->AddNode(sideAExtSuppRing, 3,
3199 new TGeoTranslation(0, 0, zloc) );
3200 trayASuppStruct->AddNode(sideAExtSuppRing, 4,
3201 new TGeoCombiTrans( 0, 0, zloc,
3202 new TGeoRotation("",180,0,0)));
3204 zloc += kExtSuppRingThick;
3205 trayASuppStruct->AddNode(sideASuppForwRing, 1,
3206 new TGeoTranslation(0, 0, zloc) );
3207 trayASuppStruct->AddNode(sideASuppForwRing, 2,
3208 new TGeoCombiTrans( 0, 0, zloc,
3209 new TGeoRotation("",180,0,0)));
3211 zloc += kSuppForwRingThikAll;
3212 trayASuppStruct->AddNode(sideASuppForwCone, 1,
3213 new TGeoTranslation(0, 0, zloc) );
3214 trayASuppStruct->AddNode(sideASuppForwCone, 2,
3215 new TGeoCombiTrans( 0, 0, zloc,
3216 new TGeoRotation("",180,0,0)));
3218 zloc += (kSuppForwConeLen1+kSuppForwConeLen2);
3219 trayASuppStruct->AddNode(sideAFirstSuppBackRing, 1,
3220 new TGeoTranslation(0, 0, zloc) );
3221 trayASuppStruct->AddNode(sideAFirstSuppBackRing, 2,
3222 new TGeoCombiTrans( 0, 0, zloc,
3223 new TGeoRotation("",180,0,0)));
3225 zloc += kSuppBackRingThick1;
3226 trayASuppStruct->AddNode(sideASecondSuppBackRing, 1,
3227 new TGeoTranslation(0, 0, zloc) );
3228 trayASuppStruct->AddNode(sideASecondSuppBackRing, 2,
3229 new TGeoCombiTrans( 0, 0, zloc,
3230 new TGeoRotation("",180,0,0)));
3232 xloc = kSuppRearRingXRodHole;
3233 yloc = kSuppRearRingBaseHi + kSuppRearRingYRodHole;
3234 zloc = kRearSuppZTransGlob - kBackRodZTrans + suppRod->GetDz();
3235 trayASuppStruct->AddNode(sideASuppRod, 1,
3236 new TGeoTranslation( xloc, yloc, zloc) );
3237 trayASuppStruct->AddNode(sideASuppRod, 2,
3238 new TGeoTranslation(-xloc, yloc, zloc) );
3239 trayASuppStruct->AddNode(sideASuppRod, 3,
3240 new TGeoTranslation( xloc,-yloc, zloc) );
3241 trayASuppStruct->AddNode(sideASuppRod, 4,
3242 new TGeoTranslation(-xloc,-yloc, zloc) );
3244 zloc += suppRod->GetDz();
3245 trayASuppStruct->AddNode(sideASuppRearRing, 1,
3246 new TGeoTranslation( 0, 0, zloc) );
3247 trayASuppStruct->AddNode(sideASuppRearRing, 2,
3248 new TGeoCombiTrans( 0, 0, zloc,
3249 new TGeoRotation("",180,0,0)));
3252 // Finally put everything in the mother volume
3253 moth->AddNode(trayASuppStruct,1,0);
3258 //______________________________________________________________________
3259 void AliITSv11GeometrySupport::ServicesCableSupportSPD(TGeoVolume *moth,
3262 // Creates the all SPD cable trays which are outside the ITS support cones
3263 // but still inside the TPC
3264 // In order to avoid a huge monolithic routine, this method actually
3265 // calls inner methods to create and assemble the various (macro)pieces
3268 // moth : the TGeoVolume owing the volume structure
3269 // mgr : the GeoManager (default gGeoManager)
3272 // Created: ??? Bjorn S. Nilsen
3273 // Updated: 15 Nov 2009 Mario Sitta
3275 // Technical data are taken from AutoCAD drawings and other (oral)
3276 // information given by F.Tosello
3279 SPDCableTraysSideA(moth, mgr);
3280 SPDCableTraysSideC(moth, mgr);
3284 //______________________________________________________________________
3285 void AliITSv11GeometrySupport::ServicesCableSupportSDD(TGeoVolume *moth,
3288 // Creates the all SDD cable trays which are outside the ITS support cones
3289 // but still inside the TPC
3290 // In order to avoid a huge monolithic routine, this method actually
3291 // calls inner methods to create and assemble the various (macro)pieces
3294 // moth : the TGeoVolume owing the volume structure
3295 // mgr : the GeoManager (default gGeoManager)
3298 // Created: 14 Dec 2009 Mario Sitta
3301 SDDCableTraysSideA(moth, mgr);
3302 SDDCableTraysSideC(moth, mgr);
3307 //______________________________________________________________________
3308 void AliITSv11GeometrySupport::ServicesCableSupportSSD(TGeoVolume *moth,
3311 // Creates the SSD cable trays which are outside the ITS support cones
3312 // but still inside the TPC
3313 // In order to avoid a huge monolithic routine, this method actually
3314 // calls inner methods to create and assemble the various (macro)pieces
3317 // moth : the TGeoVolume owing the volume structure
3318 // mgr : the GeoManager (default gGeoManager)
3321 // Created: 15 Nov 2009 Mario Sitta
3324 SSDCableTraysSideA(moth, mgr);
3325 SSDCableTraysSideC(moth, mgr);
3330 //______________________________________________________________________
3331 void AliITSv11GeometrySupport::SPDCableTraysSideA(TGeoVolume *moth,
3334 // Creates the SPD cable trays which are outside the ITS support cones
3335 // but still inside the TPC on Side A
3336 // (part of this code is taken or anyway inspired to ServicesCableSupport
3337 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
3340 // moth : the TGeoVolume owing the volume structure
3341 // mgr : the GeoManager (default gGeoManager)
3344 // Created: 15 Feb 2010 Mario Sitta
3345 // Updated: 10 Jun 2010 Mario Sitta Freon inside cooling pipes
3347 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
3348 // drawings and other (oral) information given by F.Tosello and D.Elia
3349 // (small differences with blueprints - e.g. -0.07mm in R1Trans and
3350 // R2Trans - fix small overlaps; they are then compensated in positioning
3351 // the Rear Tray to avoid its own overlaps with the rear supporting ring)
3352 // Optical cables and low voltage cables are approximated with mean
3353 // materials and square cross sections, but preserving the total material
3357 // Overall position and rotation of the A-Side Cable Trays
3358 // (parts of 0872/G/D)
3359 const Double_t kTrayAR1Trans = 396.93 *fgkmm;
3360 const Double_t kTrayAR2Trans = 413.93 *fgkmm;
3361 const Double_t kTrayAZTrans = 1011.00 *fgkmm;
3362 const Double_t kTrayAZRot = (180-169.5);// Degrees
3363 const Double_t kTrayAFirstRotAng = 22.00; // Degrees
3364 const Double_t kTrayASecondRotAng = 15.00; // Degrees
3366 const Double_t kForwardTrayWide = 94.00 *fgkmm;//!!!TO BE CHECKED!!!
3367 const Double_t kForwardTrayFirstHigh = 83.00 *fgkmm;//!!!TO BE CHECKED!!!
3368 const Double_t kForwardTraySecondHigh = 52.70 *fgkmm;//!!!TO BE CHECKED!!!
3369 const Double_t kForwardTrayTotalLen = 853.00 *fgkmm;
3370 const Double_t kForwardTrayFirstLen = 435.00 *fgkmm;
3371 const Double_t kForwardTrayWingWide = 16.00 *fgkmm;//!!!TO BE CHECKED!!!
3372 const Double_t kForwardTrayInterSpace = 18.00 *fgkmm;//!!!TO BE CHECKED!!!
3373 const Double_t kForwardTrayThick = 2.00 *fgkmm;
3375 const Int_t kForwardSideNpoints = 6;
3377 const Double_t kExternalTrayLen = 1200.00 *fgkmm;
3378 const Double_t kExternalTrayWide = kForwardTrayWide;
3379 const Double_t kExternalTrayHigh = kForwardTraySecondHigh;
3380 const Double_t kExternalTrayThick = kForwardTrayThick;
3382 const Double_t kCoolingTubeRmin = 5.00 *fgkmm;
3383 const Double_t kCoolingTubeRmax = 6.00 *fgkmm;
3385 const Double_t kOpticalFibersSect = 8.696*fgkmm;//!!!ESTIMATED!!!
3386 const Double_t kLowVoltageCableSect = 3.412*fgkmm;//!!!ESTIMATED!!!
3387 const Double_t kHiVoltageCableSect = 1.873*fgkmm;//!!!ESTIMATED!!!
3391 Double_t xprof[kForwardSideNpoints], yprof[kForwardSideNpoints];
3392 Double_t xloc, yloc, zloc, alpharot;
3395 // The two tray components as assemblies
3396 TGeoVolumeAssembly *cableTrayAForw =
3397 new TGeoVolumeAssembly("ITSsupportSPDTrayAForwRear");
3398 TGeoVolumeAssembly *cableTrayAExt =
3399 new TGeoVolumeAssembly("ITSsupportSPDTrayAExt");
3402 // First create all needed shapes
3404 // The lower face of the forward tray: a BBox
3405 TGeoBBox *forwTrayLowerFace = new TGeoBBox(kForwardTrayWide/2,
3406 kForwardTrayThick/2,
3407 kForwardTrayTotalLen/2);
3409 // The side face of the forward tray: a Xtru
3410 TGeoXtru *forwTraySideFace = new TGeoXtru(2);
3411 forwTraySideFace->SetName("ITSsuppSPDForwTraySide");
3414 yprof[0] = kForwardTrayThick;
3415 xprof[1] = kForwardTrayTotalLen;
3416 yprof[1] = yprof[0];
3417 xprof[2] = xprof[1];
3418 yprof[2] = kForwardTraySecondHigh - kForwardTrayThick;
3419 xprof[3] = kForwardTrayFirstLen;
3420 yprof[3] = yprof[2];
3421 xprof[4] = xprof[3];
3422 yprof[4] = kForwardTrayFirstHigh - kForwardTrayThick;
3423 xprof[5] = xprof[0];
3424 yprof[5] = yprof[4];
3426 forwTraySideFace->DefinePolygon(6, xprof, yprof);
3427 forwTraySideFace->DefineSection(0, 0);
3428 forwTraySideFace->DefineSection(1, kForwardTrayThick);
3430 // The covers of the forward tray: two BBox's
3431 TGeoBBox *forwTrayShortCover = new TGeoBBox(kForwardTrayWide/2,
3432 kForwardTrayThick/2,
3433 kForwardTrayFirstLen/2);
3435 TGeoBBox *forwTrayLongCover = new TGeoBBox(kForwardTrayWide/2,
3436 kForwardTrayThick/2,
3437 (kForwardTrayTotalLen - kForwardTrayFirstLen)/2);
3439 // Each small wing of the forward tray: a BBox
3440 TGeoBBox *forwTrayWing = new TGeoBBox(kForwardTrayWingWide/2,
3441 (kForwardTrayFirstHigh-kForwardTraySecondHigh)/2,
3442 kForwardTrayThick/2);
3444 // The internal plane of the forward tray: a BBox
3445 TGeoBBox *forwTrayPlane = new TGeoBBox(kForwardTrayWide/2-kForwardTrayThick,
3446 kForwardTrayThick/2,
3447 kForwardTrayTotalLen/2);
3449 // The internal wall of the forward tray: a BBox
3450 TGeoBBox *forwTrayWall = new TGeoBBox(kForwardTrayThick/2,
3451 (kForwardTrayInterSpace-kForwardTrayThick)/2,
3452 kForwardTrayTotalLen/2);
3454 // Each horizontal face of the external tray: a BBox
3455 TGeoBBox *extTrayHorFace = new TGeoBBox(kExternalTrayWide/2-kExternalTrayThick,
3456 kExternalTrayThick/2,
3457 kExternalTrayLen/2);
3459 // Each vertical face of the external tray: a BBox
3460 TGeoBBox *extTrayVerFace = new TGeoBBox(kExternalTrayThick/2,
3461 kExternalTrayHigh/2,
3462 kExternalTrayLen/2);
3464 // The internal wall of the external tray: a BBox
3465 TGeoBBox *extTrayWall = new TGeoBBox(kExternalTrayThick/2,
3466 (kForwardTrayInterSpace-kExternalTrayThick)/2,
3467 kExternalTrayLen/2);
3469 // The cooling tube inside the forward tray: a Tube
3470 Double_t zelong = (kForwardTraySecondHigh - 2*kForwardTrayThick
3471 - 2*forwTrayWall->GetDY() - kCoolingTubeRmax)*SinD(kTrayAZRot);
3472 Double_t zlen = (zelong + kForwardTrayTotalLen)/2;
3473 TGeoTube *coolTubeForw = new TGeoTube(0, kCoolingTubeRmax, zlen);
3475 // The freon inside the forward tray tubes: a Tube
3476 TGeoTube *freonTubeForw = new TGeoTube(0, kCoolingTubeRmin, zlen);
3478 // The cooling tube inside the external tray: a Ctub
3479 TGeoCtub *coolTubeExt = new TGeoCtub(0, kCoolingTubeRmax,
3480 kExternalTrayLen/2, 0, 360,
3481 0, SinD(kTrayAZRot),-CosD(kTrayAZRot),
3484 // The freon inside the forward tray tubes: a Tube
3485 TGeoCtub *freonTubeExt = new TGeoCtub(0, kCoolingTubeRmin,
3486 kExternalTrayLen/2, 0, 360,
3487 0, SinD(kTrayAZRot),-CosD(kTrayAZRot),
3490 // The optical fibers inside the forward tray: a BBox
3491 TGeoBBox *optFibsForw = new TGeoBBox(kOpticalFibersSect/2,
3492 kOpticalFibersSect/2,
3493 kForwardTrayTotalLen/2);
3495 // The optical fibers inside the external tray: a Xtru
3496 TGeoXtru *optFibsExt = new TGeoXtru(2);
3497 optFibsExt->SetName("ITSsuppSPDExtTrayOptFibs");
3499 yprof[0] = -kExternalTrayHigh + 2*kExternalTrayThick
3500 + 2*forwTrayWall->GetDY();
3501 xprof[0] = yprof[0]*TanD(kTrayAZRot);
3502 xprof[1] = kExternalTrayLen;
3503 yprof[1] = yprof[0];
3504 xprof[2] = xprof[1];
3505 yprof[2] = yprof[1] + kOpticalFibersSect;
3506 yprof[3] = yprof[2];
3507 xprof[3] = yprof[2]*TanD(kTrayAZRot);
3509 optFibsExt->DefinePolygon(4, xprof, yprof);
3510 optFibsExt->DefineSection(0, 0);
3511 optFibsExt->DefineSection(1, kOpticalFibersSect);
3513 // The Low Voltage cables inside the forward tray: a BBox
3514 TGeoBBox *lowCablesForw = new TGeoBBox(kLowVoltageCableSect/2,
3515 kLowVoltageCableSect/2,
3516 kForwardTrayTotalLen/2);
3518 // The Low Voltage inside the external tray: a Xtru
3519 TGeoXtru *lowCablesExt = new TGeoXtru(2);
3520 lowCablesExt->SetName("ITSsuppSPDExtTrayLowVoltage");
3522 yprof[0] = -kExternalTrayHigh + 2*kExternalTrayThick
3523 + 2*forwTrayWall->GetDY();
3524 xprof[0] = yprof[0]*TanD(kTrayAZRot);
3525 xprof[1] = kExternalTrayLen;
3526 yprof[1] = yprof[0];
3527 xprof[2] = xprof[1];
3528 yprof[2] = yprof[1] + kLowVoltageCableSect;
3529 yprof[3] = yprof[2];
3530 xprof[3] = yprof[2]*TanD(kTrayAZRot);
3532 lowCablesExt->DefinePolygon(4, xprof, yprof);
3533 lowCablesExt->DefineSection(0, 0);
3534 lowCablesExt->DefineSection(1, kLowVoltageCableSect);
3536 // The High Voltage cables inside the forward tray: a BBox
3537 TGeoBBox *hiCablesForw = new TGeoBBox(kHiVoltageCableSect/2,
3538 kHiVoltageCableSect/2,
3539 kForwardTrayTotalLen/2);
3541 // The High Voltage inside the external tray: a Xtru
3542 TGeoXtru *hiCablesExt = new TGeoXtru(2);
3543 hiCablesExt->SetName("ITSsuppSPDExtTrayHiVoltage");
3545 yprof[0] = -kExternalTrayHigh + 2*kExternalTrayThick
3546 + 2*forwTrayWall->GetDY();
3547 xprof[0] = yprof[0]*TanD(kTrayAZRot);
3548 xprof[1] = kExternalTrayLen;
3549 yprof[1] = yprof[0];
3550 xprof[2] = xprof[1];
3551 yprof[2] = yprof[1] + kHiVoltageCableSect;
3552 yprof[3] = yprof[2];
3553 xprof[3] = yprof[2]*TanD(kTrayAZRot);
3555 hiCablesExt->DefinePolygon(4, xprof, yprof);
3556 hiCablesExt->DefineSection(0, 0);
3557 hiCablesExt->DefineSection(1, kHiVoltageCableSect);
3560 // We have all shapes: now create the real volumes
3561 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
3562 TGeoMedium *medIn = mgr->GetMedium("ITS_INOX$");
3563 TGeoMedium *medFreon = mgr->GetMedium("ITS_GASEOUS FREON$");
3564 TGeoMedium *medFibs = mgr->GetMedium("ITS_SDD OPTICFIB$");//!TO BE CHECKED!
3565 TGeoMedium *medLVC = mgr->GetMedium("ITS_SPD_LOWCABLES$");
3566 TGeoMedium *medHVC = mgr->GetMedium("ITS_SPD_HICABLES$");
3568 TGeoVolume *forwTrayABase = new TGeoVolume("ITSsuppSPDSideAForwTrayABase",
3569 forwTrayLowerFace, medAl);
3571 forwTrayABase->SetVisibility(kTRUE);
3572 forwTrayABase->SetLineColor(6); // Purple
3573 forwTrayABase->SetLineWidth(1);
3574 forwTrayABase->SetFillColor(forwTrayABase->GetLineColor());
3575 forwTrayABase->SetFillStyle(4000); // 0% transparent
3577 TGeoVolume *forwTrayASide = new TGeoVolume("ITSsuppSPDSideAForwTrayASide",
3578 forwTraySideFace, medAl);
3580 forwTrayASide->SetVisibility(kTRUE);
3581 forwTrayASide->SetLineColor(6); // Purple
3582 forwTrayASide->SetLineWidth(1);
3583 forwTrayASide->SetFillColor(forwTrayASide->GetLineColor());
3584 forwTrayASide->SetFillStyle(4000); // 0% transparent
3586 TGeoVolume *forwTrayACoverShort = new TGeoVolume("ITSsuppSPDSideAForwTrayASC",
3587 forwTrayShortCover, medAl);
3589 forwTrayACoverShort->SetVisibility(kTRUE);
3590 forwTrayACoverShort->SetLineColor(6); // Purple
3591 forwTrayACoverShort->SetLineWidth(1);
3592 forwTrayACoverShort->SetFillColor(forwTrayACoverShort->GetLineColor());
3593 forwTrayACoverShort->SetFillStyle(4000); // 0% transparent
3595 TGeoVolume *forwTrayACoverLong = new TGeoVolume("ITSsuppSPDSideAForwTrayALC",
3596 forwTrayLongCover, medAl);
3598 forwTrayACoverLong->SetVisibility(kTRUE);
3599 forwTrayACoverLong->SetLineColor(6); // Purple
3600 forwTrayACoverLong->SetLineWidth(1);
3601 forwTrayACoverLong->SetFillColor(forwTrayACoverLong->GetLineColor());
3602 forwTrayACoverLong->SetFillStyle(4000); // 0% transparent
3604 TGeoVolume *forwTrayAWing = new TGeoVolume("ITSsuppSPDSideAForwTrayAWing",
3605 forwTrayWing, medAl);
3607 forwTrayAWing->SetVisibility(kTRUE);
3608 forwTrayAWing->SetLineColor(6); // Purple
3609 forwTrayAWing->SetLineWidth(1);
3610 forwTrayAWing->SetFillColor(forwTrayAWing->GetLineColor());
3611 forwTrayAWing->SetFillStyle(4000); // 0% transparent
3613 TGeoVolume *forwTrayAPlane = new TGeoVolume("ITSsuppSPDSideAForwTrayAPlane",
3614 forwTrayPlane, medAl);
3616 forwTrayAPlane->SetVisibility(kTRUE);
3617 forwTrayAPlane->SetLineColor(6); // Purple
3618 forwTrayAPlane->SetLineWidth(1);
3619 forwTrayAPlane->SetFillColor(forwTrayAPlane->GetLineColor());
3620 forwTrayAPlane->SetFillStyle(4000); // 0% transparent
3622 TGeoVolume *forwTrayAWall = new TGeoVolume("ITSsuppSPDSideAForwTrayAWall",
3623 forwTrayWall, medAl);
3625 forwTrayAWall->SetVisibility(kTRUE);
3626 forwTrayAWall->SetLineColor(6); // Purple
3627 forwTrayAWall->SetLineWidth(1);
3628 forwTrayAWall->SetFillColor(forwTrayAWall->GetLineColor());
3629 forwTrayAWall->SetFillStyle(4000); // 0% transparent
3631 TGeoVolume *extTrayAHorFace = new TGeoVolume("ITSsuppSPDSideAExtTrayHorFace",
3632 extTrayHorFace, medAl);
3634 extTrayAHorFace->SetVisibility(kTRUE);
3635 extTrayAHorFace->SetLineColor(6); // Purple
3636 extTrayAHorFace->SetLineWidth(1);
3637 extTrayAHorFace->SetFillColor(extTrayAHorFace->GetLineColor());
3638 extTrayAHorFace->SetFillStyle(4000); // 0% transparent
3640 TGeoVolume *extTrayAVerFace = new TGeoVolume("ITSsuppSPDSideAExtTrayVerFace",
3641 extTrayVerFace, medAl);
3643 extTrayAVerFace->SetVisibility(kTRUE);
3644 extTrayAVerFace->SetLineColor(6); // Purple
3645 extTrayAVerFace->SetLineWidth(1);
3646 extTrayAVerFace->SetFillColor(extTrayAVerFace->GetLineColor());
3647 extTrayAVerFace->SetFillStyle(4000); // 0% transparent
3649 TGeoVolume *extTrayAWall = new TGeoVolume("ITSsuppSPDSideAExtTrayWall",
3650 extTrayWall, medAl);
3652 extTrayAWall->SetVisibility(kTRUE);
3653 extTrayAWall->SetLineColor(6); // Purple
3654 extTrayAWall->SetLineWidth(1);
3655 extTrayAWall->SetFillColor(extTrayAWall->GetLineColor());
3656 extTrayAWall->SetFillStyle(4000); // 0% transparent
3658 TGeoVolume *forwCoolTube = new TGeoVolume("ITSsuppSPDSideAForwTrayCoolTube",
3659 coolTubeForw, medIn);
3661 forwCoolTube->SetVisibility(kTRUE);
3662 forwCoolTube->SetLineColor(kGray); // as in GeometrySPD
3663 forwCoolTube->SetLineWidth(1);
3664 forwCoolTube->SetFillColor(forwCoolTube->GetLineColor());
3665 forwCoolTube->SetFillStyle(4000); // 0% transparent
3667 TGeoVolume *forwCoolFreon = new TGeoVolume("ITSsuppSPDSideAForwTrayFreon",
3668 freonTubeForw, medFreon);
3670 forwCoolFreon->SetVisibility(kTRUE);
3671 forwCoolFreon->SetLineColor(kBlue); // Blue
3672 forwCoolFreon->SetLineWidth(1);
3673 forwCoolFreon->SetFillColor(forwCoolFreon->GetLineColor());
3674 forwCoolFreon->SetFillStyle(4000); // 0% transparent
3676 TGeoVolume *extCoolTube = new TGeoVolume("ITSsuppSPDSideAExtTrayCoolTube",
3677 coolTubeExt, medIn);
3679 extCoolTube->SetVisibility(kTRUE);
3680 extCoolTube->SetLineColor(kGray); // as in GeometrySPD
3681 extCoolTube->SetLineWidth(1);
3682 extCoolTube->SetFillColor(extCoolTube->GetLineColor());
3683 extCoolTube->SetFillStyle(4000); // 0% transparent
3685 TGeoVolume *extCoolFreon = new TGeoVolume("ITSsuppSPDSideAExtTrayFreon",
3686 freonTubeExt, medFreon);
3688 extCoolFreon->SetVisibility(kTRUE);
3689 extCoolFreon->SetLineColor(kBlue); // Blue
3690 extCoolFreon->SetLineWidth(1);
3691 extCoolFreon->SetFillColor(extCoolFreon->GetLineColor());
3692 extCoolFreon->SetFillStyle(4000); // 0% transparent
3694 TGeoVolume *forwOptFibs = new TGeoVolume("ITSsuppSPDSideAForwTrayOptFibs",
3695 optFibsForw, medFibs);
3697 forwOptFibs->SetVisibility(kTRUE);
3698 forwOptFibs->SetLineColor(kOrange); // Orange
3699 forwOptFibs->SetLineWidth(1);
3700 forwOptFibs->SetFillColor(forwOptFibs->GetLineColor());
3701 forwOptFibs->SetFillStyle(4000); // 0% transparent
3703 TGeoVolume *extOptFibs = new TGeoVolume("ITSsuppSPDSideAExtTrayOptFibs",
3704 optFibsExt, medFibs);
3706 extOptFibs->SetVisibility(kTRUE);
3707 extOptFibs->SetLineColor(kOrange); // Orange
3708 extOptFibs->SetLineWidth(1);
3709 extOptFibs->SetFillColor(extOptFibs->GetLineColor());
3710 extOptFibs->SetFillStyle(4000); // 0% transparent
3712 TGeoVolume *forwLowCabs = new TGeoVolume("ITSsuppSPDSideAForwTrayLowCabs",
3713 lowCablesForw, medLVC);
3715 forwLowCabs->SetVisibility(kTRUE);
3716 forwLowCabs->SetLineColor(kRed); // Red
3717 forwLowCabs->SetLineWidth(1);
3718 forwLowCabs->SetFillColor(forwLowCabs->GetLineColor());
3719 forwLowCabs->SetFillStyle(4000); // 0% transparent
3721 TGeoVolume *extLowCabs = new TGeoVolume("ITSsuppSPDSideAExtTrayLowCabs",
3722 lowCablesExt, medLVC);
3724 extLowCabs->SetVisibility(kTRUE);
3725 extLowCabs->SetLineColor(kRed); // Red
3726 extLowCabs->SetLineWidth(1);
3727 extLowCabs->SetFillColor(extLowCabs->GetLineColor());
3728 extLowCabs->SetFillStyle(4000); // 0% transparent
3730 TGeoVolume *forwHiCabs = new TGeoVolume("ITSsuppSPDSideAForwTrayHiCabs",
3731 hiCablesForw, medHVC);
3733 forwHiCabs->SetVisibility(kTRUE);
3734 forwHiCabs->SetLineColor(kRed); // Red
3735 forwHiCabs->SetLineWidth(1);
3736 forwHiCabs->SetFillColor(forwHiCabs->GetLineColor());
3737 forwHiCabs->SetFillStyle(4000); // 0% transparent
3739 TGeoVolume *extHiCabs = new TGeoVolume("ITSsuppSPDSideAExtTrayHiCabs",
3740 hiCablesExt, medHVC);
3742 extHiCabs->SetVisibility(kTRUE);
3743 extHiCabs->SetLineColor(kRed); // Red
3744 extHiCabs->SetLineWidth(1);
3745 extHiCabs->SetFillColor(extHiCabs->GetLineColor());
3746 extHiCabs->SetFillStyle(4000); // 0% transparent
3749 // Now build up the trays
3750 yloc = forwTrayLowerFace->GetDY();
3751 zloc = forwTrayLowerFace->GetDZ();
3752 cableTrayAForw->AddNode(forwTrayABase, 1,
3753 new TGeoTranslation(0, yloc, zloc));
3755 xloc = kForwardTrayWide/2;
3756 cableTrayAForw->AddNode(forwTrayASide, 1,
3757 new TGeoCombiTrans( xloc, 0, 0,
3758 new TGeoRotation("",90,-90,-90)));
3759 cableTrayAForw->AddNode(forwTrayASide, 2,
3760 new TGeoCombiTrans(-xloc+kForwardTrayThick, 0, 0,
3761 new TGeoRotation("",90,-90,-90)));
3763 yloc = kForwardTrayFirstHigh - forwTrayShortCover->GetDY();
3764 zloc = forwTrayShortCover->GetDZ();
3765 cableTrayAForw->AddNode(forwTrayACoverShort, 1,
3766 new TGeoTranslation(0, yloc, zloc));
3768 yloc = kForwardTraySecondHigh - forwTrayLongCover->GetDY();
3769 zloc = kForwardTrayFirstLen + forwTrayLongCover->GetDZ();
3770 cableTrayAForw->AddNode(forwTrayACoverLong, 1,
3771 new TGeoTranslation(0, yloc, zloc));
3773 xloc = kForwardTrayWide/2 - kForwardTrayThick - forwTrayWing->GetDX();
3774 yloc = kForwardTrayFirstHigh - kForwardTrayThick - forwTrayWing->GetDY();
3775 zloc = kForwardTrayFirstLen - forwTrayWing->GetDZ();
3776 cableTrayAForw->AddNode(forwTrayAWing, 1,
3777 new TGeoTranslation( xloc, yloc, zloc));
3778 cableTrayAForw->AddNode(forwTrayAWing, 2,
3779 new TGeoTranslation(-xloc, yloc, zloc));
3781 yloc = kForwardTrayThick + kForwardTrayInterSpace - forwTrayPlane->GetDY();
3782 zloc = forwTrayPlane->GetDZ();
3783 cableTrayAForw->AddNode(forwTrayAPlane, 1,
3784 new TGeoTranslation(0, yloc, zloc));
3786 yloc = kForwardTrayThick + forwTrayWall->GetDY();
3787 zloc = forwTrayWall->GetDZ();
3788 cableTrayAForw->AddNode(forwTrayAWall, 1,
3789 new TGeoTranslation(0, yloc, zloc));
3791 forwCoolTube->AddNode(forwCoolFreon, 1, 0);
3793 yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY()
3794 + coolTubeForw->GetRmax();
3795 zloc = coolTubeForw->GetDz();
3796 cableTrayAForw->AddNode(forwCoolTube, 1,
3797 new TGeoTranslation(0, yloc, zloc));
3799 xloc = optFibsForw->GetDX() + coolTubeForw->GetRmax();
3800 yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY() + optFibsForw->GetDY();
3801 zloc = optFibsForw->GetDZ();
3802 cableTrayAForw->AddNode(forwOptFibs, 1,
3803 new TGeoTranslation(xloc, yloc, zloc));
3805 xloc = lowCablesForw->GetDX() + coolTubeForw->GetRmax();
3806 yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY() +lowCablesForw->GetDY();
3807 zloc = lowCablesForw->GetDZ();
3808 cableTrayAForw->AddNode(forwLowCabs, 1,
3809 new TGeoTranslation(-xloc, yloc, zloc));
3811 xloc = hiCablesForw->GetDX() + 2*lowCablesForw->GetDX()
3812 + coolTubeForw->GetRmax();
3813 yloc = 2*kForwardTrayThick + 2*forwTrayWall->GetDY() + hiCablesForw->GetDY();
3814 zloc = hiCablesForw->GetDZ();
3815 cableTrayAForw->AddNode(forwHiCabs, 1,
3816 new TGeoTranslation(-xloc, yloc, zloc));
3818 // To simplify following placement in MARS, origin is on top
3819 yloc = -kExternalTrayHigh + kExternalTrayThick/2;
3820 zloc = kExternalTrayLen/2;
3821 cableTrayAExt->AddNode(extTrayAHorFace, 1,
3822 new TGeoTranslation( 0, yloc, zloc));
3824 xloc = kExternalTrayWide/2 - kExternalTrayThick/2;
3825 yloc = -kExternalTrayHigh/2;
3826 cableTrayAExt->AddNode(extTrayAVerFace, 1,
3827 new TGeoTranslation( xloc, yloc, zloc));
3828 cableTrayAExt->AddNode(extTrayAVerFace, 2,
3829 new TGeoTranslation(-xloc, yloc, zloc));
3831 yloc = -kExternalTrayThick/2;
3832 cableTrayAExt->AddNode(extTrayAHorFace, 2,
3833 new TGeoTranslation( 0, yloc, zloc));
3835 yloc = -kExternalTrayHigh
3836 + kExternalTrayThick + kForwardTrayInterSpace - kExternalTrayThick/2;
3837 cableTrayAExt->AddNode(extTrayAHorFace, 3,
3838 new TGeoTranslation( 0, yloc, zloc));
3840 yloc = -kExternalTrayHigh + kExternalTrayThick + extTrayWall->GetDY();
3841 cableTrayAExt->AddNode(extTrayAWall, 1,
3842 new TGeoTranslation( 0, yloc, zloc));
3844 extCoolTube->AddNode(extCoolFreon, 1, 0);
3846 yloc = -kExternalTrayHigh + 2*kExternalTrayThick + 2*extTrayWall->GetDY()
3847 + coolTubeExt->GetRmax();
3848 zloc = coolTubeExt->GetDz();
3849 cableTrayAExt->AddNode(extCoolTube, 1,
3850 new TGeoTranslation(0, yloc, zloc));
3852 xloc = kOpticalFibersSect + coolTubeExt->GetRmax();
3853 cableTrayAExt->AddNode(extOptFibs, 1,
3854 new TGeoCombiTrans( xloc, 0, 0,
3855 new TGeoRotation("",90,-90,-90)));
3857 xloc = kLowVoltageCableSect + coolTubeExt->GetRmax();
3858 cableTrayAExt->AddNode(extLowCabs, 1,
3859 new TGeoCombiTrans(-xloc, 0, 0,
3860 new TGeoRotation("",90,-90,-90)));
3862 xloc = 2*kHiVoltageCableSect + kLowVoltageCableSect + coolTubeExt->GetRmax();
3863 cableTrayAExt->AddNode(extHiCabs, 1,
3864 new TGeoCombiTrans(-xloc, 0, 0,
3865 new TGeoRotation("",90,-90,-90)));
3868 // Finally put everything in the mother volume
3869 Double_t rExtTray = kTrayAR2Trans + kExternalTrayHigh;
3871 moth->AddNode(cableTrayAForw,1,
3872 new TGeoTranslation( 0, kTrayAR1Trans, kTrayAZTrans));
3873 moth->AddNode(cableTrayAForw,2,
3874 new TGeoCombiTrans( 0,-kTrayAR1Trans, kTrayAZTrans,
3875 new TGeoRotation("",180, 0, 0)));
3877 yloc = kTrayAR1Trans + kExternalTrayHigh;
3878 zloc = kTrayAZTrans + kForwardTrayTotalLen;
3879 moth->AddNode(cableTrayAExt,1,
3880 new TGeoCombiTrans( 0, yloc, zloc,
3881 new TGeoRotation("", 0,-kTrayAZRot, 0)));
3882 moth->AddNode(cableTrayAExt,2,
3883 new TGeoCombiTrans( 0,-yloc, zloc,
3884 new TGeoRotation("",180,-kTrayAZRot, 0)));
3886 alpharot = kTrayAFirstRotAng + kTrayASecondRotAng;
3887 xloc = kTrayAR2Trans*SinD(alpharot);
3888 yloc = kTrayAR2Trans*CosD(alpharot);
3889 moth->AddNode(cableTrayAForw,3,
3890 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3891 new TGeoRotation("",-alpharot,0,0) ) );
3892 xloc = rExtTray*SinD(alpharot);
3893 yloc = rExtTray*CosD(alpharot);
3894 moth->AddNode(cableTrayAExt,3,
3895 new TGeoCombiTrans( xloc, yloc, zloc,
3896 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3899 xloc = kTrayAR2Trans*SinD(alpharot);
3900 yloc = kTrayAR2Trans*CosD(alpharot);
3901 moth->AddNode(cableTrayAForw,4,
3902 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3903 new TGeoRotation("",-alpharot,0,0) ) );
3904 xloc = rExtTray*SinD(alpharot);
3905 yloc = rExtTray*CosD(alpharot);
3906 moth->AddNode(cableTrayAExt,4,
3907 new TGeoCombiTrans( xloc, yloc, zloc,
3908 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3910 alpharot = - kTrayAFirstRotAng - kTrayASecondRotAng;
3911 xloc = kTrayAR2Trans*SinD(alpharot);
3912 yloc = kTrayAR2Trans*CosD(alpharot);
3913 moth->AddNode(cableTrayAForw,5,
3914 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3915 new TGeoRotation("",-alpharot,0,0) ) );
3916 xloc = rExtTray*SinD(alpharot);
3917 yloc = rExtTray*CosD(alpharot);
3918 moth->AddNode(cableTrayAExt,5,
3919 new TGeoCombiTrans( xloc, yloc, zloc,
3920 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3923 xloc = kTrayAR2Trans*SinD(alpharot);
3924 yloc = kTrayAR2Trans*CosD(alpharot);
3925 moth->AddNode(cableTrayAForw,6,
3926 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3927 new TGeoRotation("",-alpharot,0,0) ) );
3928 xloc = rExtTray*SinD(alpharot);
3929 yloc = rExtTray*CosD(alpharot);
3930 moth->AddNode(cableTrayAExt,6,
3931 new TGeoCombiTrans( xloc, yloc, zloc,
3932 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3934 alpharot = kTrayAFirstRotAng + 3*kTrayASecondRotAng;
3935 xloc = kTrayAR2Trans*SinD(alpharot);
3936 yloc = kTrayAR2Trans*CosD(alpharot);
3937 moth->AddNode(cableTrayAForw,7,
3938 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3939 new TGeoRotation("",-alpharot,0,0) ) );
3940 xloc = rExtTray*SinD(alpharot);
3941 yloc = rExtTray*CosD(alpharot);
3942 moth->AddNode(cableTrayAExt,7,
3943 new TGeoCombiTrans( xloc, yloc, zloc,
3944 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3947 xloc = kTrayAR2Trans*SinD(alpharot);
3948 yloc = kTrayAR2Trans*CosD(alpharot);
3949 moth->AddNode(cableTrayAForw,8,
3950 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3951 new TGeoRotation("",-alpharot,0,0) ) );
3952 xloc = rExtTray*SinD(alpharot);
3953 yloc = rExtTray*CosD(alpharot);
3954 moth->AddNode(cableTrayAExt,8,
3955 new TGeoCombiTrans( xloc, yloc, zloc,
3956 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3958 alpharot = - kTrayAFirstRotAng - 3*kTrayASecondRotAng;
3959 xloc = kTrayAR2Trans*SinD(alpharot);
3960 yloc = kTrayAR2Trans*CosD(alpharot);
3961 moth->AddNode(cableTrayAForw,9,
3962 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3963 new TGeoRotation("",-alpharot,0,0) ) );
3964 xloc = rExtTray*SinD(alpharot);
3965 yloc = rExtTray*CosD(alpharot);
3966 moth->AddNode(cableTrayAExt,9,
3967 new TGeoCombiTrans( xloc, yloc, zloc,
3968 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3971 xloc = kTrayAR2Trans*SinD(alpharot);
3972 yloc = kTrayAR2Trans*CosD(alpharot);
3973 moth->AddNode(cableTrayAForw,10,
3974 new TGeoCombiTrans( xloc, yloc, kTrayAZTrans,
3975 new TGeoRotation("",-alpharot,0,0) ) );
3976 xloc = rExtTray*SinD(alpharot);
3977 yloc = rExtTray*CosD(alpharot);
3978 moth->AddNode(cableTrayAExt,10,
3979 new TGeoCombiTrans( xloc, yloc, zloc,
3980 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
3986 //______________________________________________________________________
3987 void AliITSv11GeometrySupport::SPDCableTraysSideC(TGeoVolume *moth,
3990 // Creates the SPD cable trays which are outside the ITS support cones
3991 // but still inside the TPC on Side C
3992 // (part of this code is taken or anyway inspired to ServicesCableSupport
3993 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
3996 // moth : the TGeoVolume owing the volume structure
3997 // mgr : the GeoManager (default gGeoManager)
4002 // Created: ??? Bjorn S. Nilsen
4003 // Updated: 22 Apr 2010 Mario Sitta
4004 // Updated: 10 Jun 2010 Mario Sitta Freon inside cooling pipes
4006 // Technical data are taken from AutoCAD drawings and other (oral)
4007 // information given by D.Elia
4010 // Dimensions and positions of the C-Side Cable Tray elements
4011 const Int_t kNumTraysSideC = 10;
4013 const Double_t kTrayCHalfWide = 6.350 *fgkcm;
4014 const Double_t kTrayCLength1 = 172.800 *fgkcm;
4015 const Double_t kTrayCLength2 = 189.300 *fgkcm;
4016 const Double_t kTrayCFirstLen = 435.000 *fgkmm;
4017 const Double_t kTrayCFirstHigh = 83.000 *fgkmm;//!!!TO BE CHECKED!!!
4018 const Double_t kTrayCSecondHigh = 52.700 *fgkmm;//!!!TO BE CHECKED!!!
4019 const Double_t kTrayCThick = 0.200 *fgkcm;
4020 const Double_t kTrayCInterSpace = 18.000 *fgkmm;//!!!TO BE CHECKED!!!
4021 const Double_t kTrayCFoldAngle = 5.000 *fgkDegree;
4023 const Double_t kCoolingTubeRmin = 5.000 *fgkmm;
4024 const Double_t kCoolingTubeRmax = 6.000 *fgkmm;
4025 const Double_t kOpticalFibersSect = 8.696 *fgkmm;//!!!ESTIMATED!!!
4026 const Double_t kLowVoltageCableSect = 3.412 *fgkmm;//!!!ESTIMATED!!!
4027 const Double_t kHiVoltageCableSect = 1.873 *fgkmm;//!!!ESTIMATED!!!
4029 // Overall position and rotation of the C-Side Cable Trays
4030 const Double_t kTraySideCRPos = 45.300 *fgkcm;
4031 const Double_t kTraySideCZPos = -102.400 *fgkcm;
4032 const Double_t kTraySideCAlphaRot[kNumTraysSideC/2] =
4033 { 0.0, 41.0, -41.0, 76.0, -76.0};
4034 // From position of the other trays
4038 Double_t xprof[8], yprof[8];
4039 Double_t xloc, yloc, zloc, delta, alpharot;
4042 // The single C-Side Cable tray as an assembly
4043 TGeoVolumeAssembly *cableTrayC = new TGeoVolumeAssembly("ITSsupportSPDTrayC");
4045 // First create all needed shapes
4047 // The Cable Tray lower face: a Xtru
4048 TGeoXtru *sideCHorFace = new TGeoXtru(2);
4052 xprof[1] = kTrayCLength1;
4054 xprof[2] = xprof[1] + kTrayCLength2*CosD(kTrayCFoldAngle);
4055 yprof[2] = yprof[1] + kTrayCLength2*SinD(kTrayCFoldAngle);
4056 xprof[3] = xprof[2] - kTrayCThick*SinD(kTrayCFoldAngle);
4057 yprof[3] = yprof[2] + kTrayCThick*CosD(kTrayCFoldAngle);
4058 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
4059 kTrayCThick , xprof[4], yprof[4]);
4061 yprof[5] = kTrayCThick;
4063 delta = kTrayCHalfWide - kTrayCThick;
4065 sideCHorFace->DefinePolygon(6, xprof, yprof);
4066 sideCHorFace->DefineSection(0,-delta);
4067 sideCHorFace->DefineSection(1, delta);
4069 // The Cable Tray middle face: a Xtru
4070 // (somehow duplicate of HorFace, but in this way avoid an overlap with Wall)
4071 TGeoXtru *sideCMidFace = new TGeoXtru(2);
4074 yprof[0] = kTrayCInterSpace + kTrayCThick;
4075 xprof[1] = kTrayCLength1;
4076 yprof[1] = yprof[0];
4077 xprof[2] = xprof[1] + kTrayCLength2*CosD(kTrayCFoldAngle);
4078 yprof[2] = yprof[1] + kTrayCLength2*SinD(kTrayCFoldAngle);
4079 xprof[3] = xprof[2] - kTrayCThick*SinD(kTrayCFoldAngle);
4080 yprof[3] = yprof[2] + kTrayCThick*CosD(kTrayCFoldAngle);
4081 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
4082 kTrayCThick , xprof[4], yprof[4]);
4084 yprof[5] = yprof[0] + kTrayCThick;
4086 delta = kTrayCHalfWide - kTrayCThick;
4088 sideCMidFace->DefinePolygon(6, xprof, yprof);
4089 sideCMidFace->DefineSection(0,-delta);
4090 sideCMidFace->DefineSection(1, delta);
4092 // The Cable Tray lower face: a Xtru
4093 TGeoXtru *sideCSideFace = new TGeoXtru(2);
4097 xprof[1] = kTrayCLength1;
4099 xprof[2] = xprof[1] + kTrayCLength2*CosD(kTrayCFoldAngle);
4100 yprof[2] = yprof[1] + kTrayCLength2*SinD(kTrayCFoldAngle);
4101 xprof[3] = xprof[2] - kTrayCSecondHigh*SinD(kTrayCFoldAngle);
4102 yprof[3] = yprof[2] + kTrayCSecondHigh*CosD(kTrayCFoldAngle);
4103 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
4104 kTrayCSecondHigh , xprof[4], yprof[4]);
4105 xprof[5] = kTrayCFirstLen;
4106 yprof[5] = kTrayCSecondHigh;
4107 xprof[6] = xprof[5];
4108 yprof[6] = kTrayCFirstHigh;
4109 xprof[7] = xprof[0];
4110 yprof[7] = yprof[6];
4112 sideCSideFace->DefinePolygon(8, xprof, yprof);
4113 sideCSideFace->DefineSection(0, 0);
4114 sideCSideFace->DefineSection(1, kTrayCThick);
4116 // The short cover: a BBox
4117 TGeoBBox *sideCShortCover = new TGeoBBox(kTrayCFirstLen/2,
4119 kTrayCHalfWide-kTrayCThick);
4121 // The long cover: a Xtru
4122 TGeoXtru *sideCLongCover = new TGeoXtru(2);
4124 xprof[5] = sideCSideFace->GetX(5);
4125 yprof[5] = sideCSideFace->GetY(5);
4126 xprof[4] = sideCSideFace->GetX(4);
4127 yprof[4] = sideCSideFace->GetY(4);
4128 xprof[3] = sideCSideFace->GetX(3);
4129 yprof[3] = sideCSideFace->GetY(3);
4130 xprof[2] = xprof[3] + kTrayCThick*SinD(kTrayCFoldAngle);
4131 yprof[2] = yprof[3] - kTrayCThick*CosD(kTrayCFoldAngle);
4132 InsidePoint(xprof[5], yprof[5], xprof[4], yprof[4], xprof[3], yprof[3],
4133 -kTrayCThick , xprof[1], yprof[1]);
4134 xprof[0] = xprof[5];
4135 yprof[0] = yprof[5] - kTrayCThick;
4137 delta = kTrayCHalfWide - kTrayCThick;
4139 sideCLongCover->DefinePolygon(6, xprof, yprof);
4140 sideCLongCover->DefineSection(0,-delta);
4141 sideCLongCover->DefineSection(1, delta);
4143 // The internal wall: a Xtru
4144 TGeoXtru *intWall = new TGeoXtru(2);
4146 xprof[0] = sideCHorFace->GetX(5);
4147 yprof[0] = sideCHorFace->GetY(5);
4148 xprof[1] = sideCHorFace->GetX(4);
4149 yprof[1] = sideCHorFace->GetY(4);
4150 xprof[2] = sideCHorFace->GetX(3);
4151 yprof[2] = sideCHorFace->GetY(3);
4152 xprof[3] = sideCMidFace->GetX(2);
4153 yprof[3] = sideCMidFace->GetY(2);
4154 xprof[4] = sideCMidFace->GetX(1);
4155 yprof[4] = sideCMidFace->GetY(1);
4156 xprof[5] = sideCMidFace->GetX(0);
4157 yprof[5] = sideCMidFace->GetY(0);
4159 intWall->DefinePolygon(6, xprof, yprof);
4160 intWall->DefineSection(0,-kTrayCThick/2);
4161 intWall->DefineSection(1, kTrayCThick/2);
4163 // The horizontal part of the cooling tube inside the tray: a Tube
4164 delta = sideCMidFace->GetX(4) - sideCMidFace->GetX(5);
4165 TGeoTube *horTube = new TGeoTube(0, kCoolingTubeRmax, delta/2);
4167 // The freon inside the horizontal part of the cooling tube: a Tube
4168 TGeoTube *horFreon = new TGeoTube(0, kCoolingTubeRmin, delta/2);
4170 // The inclined part of the cooling tube inside the tray: a Ctub
4171 Double_t x3, y3, x4, y4;
4172 x3 = sideCMidFace->GetX(3);
4173 y3 = sideCMidFace->GetY(3);
4174 x4 = sideCMidFace->GetX(4);
4175 y4 = sideCMidFace->GetY(4);
4176 delta = TMath::Sqrt( (x4 - x3 + kCoolingTubeRmax*SinD(kTrayCFoldAngle))*
4177 (x4 - x3 + kCoolingTubeRmax*SinD(kTrayCFoldAngle)) +
4178 (y4 + kCoolingTubeRmax - y3 - kCoolingTubeRmax*SinD(kTrayCFoldAngle))*
4179 (y4 + kCoolingTubeRmax - y3 - kCoolingTubeRmax*SinD(kTrayCFoldAngle)) );
4181 TGeoCtub *incTube = new TGeoCtub(0, kCoolingTubeRmax, delta/2, 0, 360,
4182 0, SinD(kTrayCFoldAngle),-CosD(kTrayCFoldAngle),
4185 // The freon inside the inclined part of the cooling tube: a Ctub
4186 TGeoCtub *incFreon = new TGeoCtub(0, kCoolingTubeRmin, delta/2, 0, 360,
4187 0, SinD(kTrayCFoldAngle),-CosD(kTrayCFoldAngle),
4190 // The optical fibers inside the tray: a Xtru
4191 TGeoXtru *optFibs = new TGeoXtru(2);
4193 xprof[0] = sideCMidFace->GetX(5);
4194 yprof[0] = sideCMidFace->GetY(5);
4195 xprof[1] = sideCMidFace->GetX(4);
4196 yprof[1] = sideCMidFace->GetY(4);
4197 xprof[2] = sideCMidFace->GetX(3);
4198 yprof[2] = sideCMidFace->GetY(3);
4199 xprof[3] = xprof[2] - kOpticalFibersSect*SinD(kTrayCFoldAngle);
4200 yprof[3] = yprof[2] + kOpticalFibersSect*CosD(kTrayCFoldAngle);
4201 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
4202 kOpticalFibersSect , xprof[4], yprof[4]);
4204 yprof[5] = yprof[0] + kOpticalFibersSect;
4206 optFibs->DefinePolygon(6, xprof, yprof);
4207 optFibs->DefineSection(0, 0);
4208 optFibs->DefineSection(1, kOpticalFibersSect);
4210 // The low voltage cables inside the tray: a Xtru
4211 TGeoXtru *lowCables = new TGeoXtru(2);
4213 xprof[0] = sideCMidFace->GetX(5);
4214 yprof[0] = sideCMidFace->GetY(5);
4215 xprof[1] = sideCMidFace->GetX(4);
4216 yprof[1] = sideCMidFace->GetY(4);
4217 xprof[2] = sideCMidFace->GetX(3);
4218 yprof[2] = sideCMidFace->GetY(3);
4219 xprof[3] = xprof[2] - kLowVoltageCableSect*SinD(kTrayCFoldAngle);
4220 yprof[3] = yprof[2] + kLowVoltageCableSect*CosD(kTrayCFoldAngle);
4221 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
4222 kLowVoltageCableSect , xprof[4], yprof[4]);
4224 yprof[5] = yprof[0] + kLowVoltageCableSect;
4226 lowCables->DefinePolygon(6, xprof, yprof);
4227 lowCables->DefineSection(0, 0);
4228 lowCables->DefineSection(1, kLowVoltageCableSect);
4230 // The high voltage cables inside the tray: a Xtru
4231 TGeoXtru *hiCables = new TGeoXtru(2);
4233 xprof[0] = sideCMidFace->GetX(5);
4234 yprof[0] = sideCMidFace->GetY(5);
4235 xprof[1] = sideCMidFace->GetX(4);
4236 yprof[1] = sideCMidFace->GetY(4);
4237 xprof[2] = sideCMidFace->GetX(3);
4238 yprof[2] = sideCMidFace->GetY(3);
4239 xprof[3] = xprof[2] - kHiVoltageCableSect*SinD(kTrayCFoldAngle);
4240 yprof[3] = yprof[2] + kHiVoltageCableSect*CosD(kTrayCFoldAngle);
4241 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
4242 kHiVoltageCableSect , xprof[4], yprof[4]);
4244 yprof[5] = yprof[0] + kHiVoltageCableSect;
4246 hiCables->DefinePolygon(6, xprof, yprof);
4247 hiCables->DefineSection(0, 0);
4248 hiCables->DefineSection(1, kHiVoltageCableSect);
4251 // We have all shapes: now create the real volumes
4252 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
4253 TGeoMedium *medIn = mgr->GetMedium("ITS_INOX$");
4254 TGeoMedium *medFr = mgr->GetMedium("ITS_Freon$");
4255 TGeoMedium *medFibs = mgr->GetMedium("ITS_SDD OPTICFIB$");//!!TO BE CHECKED!!
4256 TGeoMedium *medLVC = mgr->GetMedium("ITS_SPD_LOWCABLES$");
4257 TGeoMedium *medHVC = mgr->GetMedium("ITS_SPD_HICABLES$");
4259 TGeoVolume *traySideCHorFace = new TGeoVolume("ITSsuppSPDTraySideCHor",
4260 sideCHorFace, medAl);
4262 traySideCHorFace->SetVisibility(kTRUE);
4263 traySideCHorFace->SetLineColor(6); // Purple
4264 traySideCHorFace->SetLineWidth(1);
4265 traySideCHorFace->SetFillColor(traySideCHorFace->GetLineColor());
4266 traySideCHorFace->SetFillStyle(4000); // 0% transparent
4268 TGeoVolume *traySideCMidFace = new TGeoVolume("ITSsuppSPDTraySideCMid",
4269 sideCMidFace, medAl);
4271 traySideCMidFace->SetVisibility(kTRUE);
4272 traySideCMidFace->SetLineColor(6); // Purple
4273 traySideCMidFace->SetLineWidth(1);
4274 traySideCMidFace->SetFillColor(traySideCMidFace->GetLineColor());
4275 traySideCMidFace->SetFillStyle(4000); // 0% transparent
4277 TGeoVolume *traySideCSideFace = new TGeoVolume("ITSsuppSPDTraySideCSide",
4278 sideCSideFace, medAl);
4280 traySideCSideFace->SetVisibility(kTRUE);
4281 traySideCSideFace->SetLineColor(6); // Purple
4282 traySideCSideFace->SetLineWidth(1);
4283 traySideCSideFace->SetFillColor(traySideCSideFace->GetLineColor());
4284 traySideCSideFace->SetFillStyle(4000); // 0% transparent
4286 TGeoVolume *traySideCShortCover = new TGeoVolume("ITSsuppSPDTraySideCShCov",
4287 sideCShortCover, medAl);
4289 traySideCShortCover->SetVisibility(kTRUE);
4290 traySideCShortCover->SetLineColor(6); // Purple
4291 traySideCShortCover->SetLineWidth(1);
4292 traySideCShortCover->SetFillColor(traySideCShortCover->GetLineColor());
4293 traySideCShortCover->SetFillStyle(4000); // 0% transparent
4295 TGeoVolume *traySideCLongCover = new TGeoVolume("ITSsuppSPDTraySideCLnCov",
4296 sideCLongCover, medAl);
4298 traySideCLongCover->SetVisibility(kTRUE);
4299 traySideCLongCover->SetLineColor(6); // Purple
4300 traySideCLongCover->SetLineWidth(1);
4301 traySideCLongCover->SetFillColor(traySideCLongCover->GetLineColor());
4302 traySideCLongCover->SetFillStyle(4000); // 0% transparent
4304 TGeoVolume *traySideCIntWall = new TGeoVolume("ITSsuppSPDTraySideCWall",
4307 traySideCIntWall->SetVisibility(kTRUE);
4308 traySideCIntWall->SetLineColor(6); // Purple
4309 traySideCIntWall->SetLineWidth(1);
4310 traySideCIntWall->SetFillColor(traySideCIntWall->GetLineColor());
4311 traySideCIntWall->SetFillStyle(4000); // 0% transparent
4313 TGeoVolume *traySideCHorTube = new TGeoVolume("ITSsuppSPDTraySideCHorTube",
4316 traySideCHorTube->SetVisibility(kTRUE);
4317 traySideCHorTube->SetLineColor(kGray); // as in GeometrySPD
4318 traySideCHorTube->SetLineWidth(1);
4319 traySideCHorTube->SetFillColor(traySideCHorTube->GetLineColor());
4320 traySideCHorTube->SetFillStyle(4000); // 0% transparent
4322 TGeoVolume *traySideCHorFreon = new TGeoVolume("ITSsuppSPDTraySideCHorFreon",
4325 traySideCHorFreon->SetVisibility(kTRUE);
4326 traySideCHorFreon->SetLineColor(kBlue); // Blue
4327 traySideCHorFreon->SetLineWidth(1);
4328 traySideCHorFreon->SetFillColor(traySideCHorFreon->GetLineColor());
4329 traySideCHorFreon->SetFillStyle(4000); // 0% transparent
4331 TGeoVolume *traySideCIncTube = new TGeoVolume("ITSsuppSPDTraySideCIncTube",
4334 traySideCIncTube->SetVisibility(kTRUE);
4335 traySideCIncTube->SetLineColor(kGray); // as in GeometrySPD
4336 traySideCIncTube->SetLineWidth(1);
4337 traySideCIncTube->SetFillColor(traySideCIncTube->GetLineColor());
4338 traySideCIncTube->SetFillStyle(4000); // 0% transparent
4340 TGeoVolume *traySideCIncFreon = new TGeoVolume("ITSsuppSPDTraySideCIncFreon",
4343 traySideCIncFreon->SetVisibility(kTRUE);
4344 traySideCIncFreon->SetLineColor(kBlue); // Blue
4345 traySideCIncFreon->SetLineWidth(1);
4346 traySideCIncFreon->SetFillColor(traySideCIncFreon->GetLineColor());
4347 traySideCIncFreon->SetFillStyle(4000); // 0% transparent
4349 TGeoVolume *traySideCOptFibs = new TGeoVolume("ITSsuppSPDTraySideCOptFibs",
4352 traySideCOptFibs->SetVisibility(kTRUE);
4353 traySideCOptFibs->SetLineColor(kOrange); // Orange
4354 traySideCOptFibs->SetLineWidth(1);
4355 traySideCOptFibs->SetFillColor(traySideCOptFibs->GetLineColor());
4356 traySideCOptFibs->SetFillStyle(4000); // 0% transparent
4358 TGeoVolume *traySideCLowCabs = new TGeoVolume("ITSsuppSPDTraySideCLowCabs",
4361 traySideCLowCabs->SetVisibility(kTRUE);
4362 traySideCLowCabs->SetLineColor(kRed); // Red
4363 traySideCLowCabs->SetLineWidth(1);
4364 traySideCLowCabs->SetFillColor(traySideCLowCabs->GetLineColor());
4365 traySideCLowCabs->SetFillStyle(4000); // 0% transparent
4367 TGeoVolume *traySideCHiCabs = new TGeoVolume("ITSsuppSPDTraySideCHiCabs",
4370 traySideCHiCabs->SetVisibility(kTRUE);
4371 traySideCHiCabs->SetLineColor(kRed); // Red
4372 traySideCHiCabs->SetLineWidth(1);
4373 traySideCHiCabs->SetFillColor(traySideCHiCabs->GetLineColor());
4374 traySideCHiCabs->SetFillStyle(4000); // 0% transparent
4377 // Now build up the trays
4378 cableTrayC->AddNode(traySideCHorFace,1,0);
4380 cableTrayC->AddNode(traySideCMidFace,1,0);
4382 zloc = kTrayCHalfWide - kTrayCThick;
4383 cableTrayC->AddNode(traySideCSideFace, 1,
4384 new TGeoTranslation( 0, 0, zloc));
4385 zloc = -kTrayCHalfWide;
4386 cableTrayC->AddNode(traySideCSideFace, 2,
4387 new TGeoTranslation( 0, 0, zloc));
4389 xloc = sideCShortCover->GetDX();
4390 yloc = kTrayCFirstHigh - sideCShortCover->GetDY();
4391 cableTrayC->AddNode(traySideCShortCover, 1,
4392 new TGeoTranslation( xloc, yloc, 0));
4394 cableTrayC->AddNode(traySideCLongCover,1,0);
4396 cableTrayC->AddNode(traySideCIntWall,1,0);
4398 traySideCHorTube->AddNode(traySideCHorFreon, 1, 0);
4399 traySideCIncTube->AddNode(traySideCIncFreon, 1, 0);
4401 xloc = horTube->GetDz();
4402 yloc = sideCMidFace->GetY(5) + horTube->GetRmax();
4403 cableTrayC->AddNode(traySideCHorTube, 1,
4404 new TGeoCombiTrans( xloc, yloc, 0,
4405 new TGeoRotation("",-90.,-90.,90.)));
4407 xloc = sideCMidFace->GetX(4) + (incTube->GetDz())*CosD(kTrayCFoldAngle);
4408 yloc = sideCMidFace->GetY(4) + incTube->GetRmax() +
4409 (incTube->GetDz())*SinD(kTrayCFoldAngle)+0.005;//Avoid small ovrlp
4410 cableTrayC->AddNode(traySideCIncTube, 1,
4411 new TGeoCombiTrans( xloc, yloc, 0,
4412 new TGeoRotation("",-90.+kTrayCFoldAngle,-90.,90.)));
4414 zloc = horTube->GetRmax();
4415 cableTrayC->AddNode(traySideCOptFibs, 1,
4416 new TGeoTranslation( 0, 0, zloc));
4418 zloc = kLowVoltageCableSect + horTube->GetRmax();
4419 cableTrayC->AddNode(traySideCLowCabs, 1,
4420 new TGeoTranslation( 0, 0,-zloc));
4422 zloc = kHiVoltageCableSect + kLowVoltageCableSect + horTube->GetRmax();
4423 cableTrayC->AddNode(traySideCHiCabs, 1,
4424 new TGeoTranslation( 0, 0,-zloc));
4427 // Finally put everything in the mother volume
4428 for (Int_t jt = 0; jt < kNumTraysSideC/2; jt++) {
4429 alpharot = kTraySideCAlphaRot[jt];
4431 xloc = kTraySideCRPos*SinD(alpharot);
4432 yloc = kTraySideCRPos*CosD(alpharot);
4433 moth->AddNode(cableTrayC,2*jt+1,
4434 new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos,
4435 new TGeoRotation("",-90.+alpharot,-90.,90.+kTrayCFoldAngle)));
4437 xloc = kTraySideCRPos*SinD(alpharot);
4438 yloc = kTraySideCRPos*CosD(alpharot);
4439 moth->AddNode(cableTrayC,2*jt+2,
4440 new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos,
4441 new TGeoRotation("",-90.+alpharot,-90.,90.+kTrayCFoldAngle)));
4448 //______________________________________________________________________
4449 void AliITSv11GeometrySupport::SDDCableTraysSideA(TGeoVolume *moth,
4452 // Creates the SDD cable trays which are outside the ITS support cones
4453 // but still inside the TPC on Side A
4454 // (part of this code is taken or anyway inspired to ServicesCableSupport
4455 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
4458 // moth : the TGeoVolume owing the volume structure
4459 // mgr : the GeoManager (default gGeoManager)
4462 // Created: ??? Bjorn S. Nilsen
4463 // Updated: 5 Jan 2010 Mario Sitta
4464 // Updated: 26 Feb 2010 Mario Sitta
4466 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
4467 // drawings and other (oral) information given by F.Tosello
4470 // Overall position and rotation of the A-Side Cable Trays
4471 // (parts of 0872/G/D)
4472 const Double_t kTrayARTrans = 408.35 *fgkmm;
4473 const Double_t kTrayAZTrans = 1011.00 *fgkmm;
4474 const Double_t kTrayAZToSupportRing = 435.00 *fgkmm;
4475 const Double_t kExternTrayZTrans = 853.00 *fgkmm;
4476 const Double_t kExternCoverYTrans = 2.00 *fgkmm;
4477 const Double_t kTrayAZRot = (180-169.5);// Degrees
4478 const Double_t kTrayAFirstRotAng = 22.00; // Degrees
4479 const Double_t kTrayASecondRotAng = 15.00; // Degrees
4481 const Double_t kForwardTrayTailHeight = 100.00 *fgkmm; // Computed
4482 const Double_t kForwardTrayTotalHeight = 170.00 *fgkmm; // Computed
4483 const Double_t kForwardTrayUpperLength = 405.00 *fgkmm; // Computed
4484 const Double_t kForwardCoverLength = 380.00 *fgkmm;
4485 const Double_t kForwardCoverWide = 133.00 *fgkmm;
4486 const Double_t kForwardCoverHeight = 10.00 *fgkmm;
4487 const Double_t kForwardCoverThick = 1.00 *fgkmm;
4489 const Double_t kExternTrayTotalLen = 1200.00 *fgkmm;
4490 const Double_t kExternTrayTotalHeight = 52.00 *fgkmm;
4491 const Double_t kExternCoverLen = kExternTrayTotalLen;
4492 const Double_t kExternCoverThick = 5.00 *fgkmm;
4493 const Double_t kExternCoverSideThick = 3.00 *fgkmm;
4495 const Int_t kForwardTrayNpoints = 8;
4499 Double_t xprof[kForwardTrayNpoints], yprof[kForwardTrayNpoints];
4500 Double_t xloc, yloc, zloc, alpharot;
4503 // The whole tray as an assembly
4504 TGeoVolumeAssembly *cableTrayA = new TGeoVolumeAssembly("ITSsupportSDDTrayA");
4507 // First create all needed shapes
4509 // The forward tray is very complex and deserves a dedicated method
4510 TGeoVolumeAssembly *forwardTray = CreateSDDForwardTraySideA(mgr);
4512 // The forward cover: a Xtru
4513 TGeoXtru *forwardCover = new TGeoXtru(2);
4514 forwardCover->SetName("ITSsuppSDDForwCover");
4516 xprof[0] = kForwardCoverWide/2;
4517 yprof[0] = kForwardCoverHeight;
4518 xprof[1] = xprof[0];
4520 xprof[2] = xprof[1] - kForwardCoverThick;
4521 yprof[2] = yprof[1];
4522 xprof[3] = xprof[2];
4523 yprof[3] = yprof[0] - kForwardCoverThick;
4525 // We did the right side, now reflex on the left side
4526 for (Int_t jp = 0; jp < 4; jp++) {
4527 xprof[4+jp] = -xprof[3-jp];
4528 yprof[4+jp] = yprof[3-jp];
4531 forwardCover->DefinePolygon(8, xprof, yprof);
4532 forwardCover->DefineSection(0, 0);
4533 forwardCover->DefineSection(1, kForwardCoverLength);
4535 // The external tray (as 0872/G/D/03): a Xtru
4536 TGeoXtru *externalTray = CreateSDDSSDTraysSideA(kExternTrayTotalLen,
4537 kExternTrayTotalHeight);
4539 // The external covers: a Composite Shape
4540 TGeoCompositeShape *externCover = CreateTrayAExternalCover(kExternCoverLen);
4543 // We have all shapes: now create the real volumes
4544 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
4545 TGeoMedium *medAntic = mgr->GetMedium("ITS_ANTICORODAL$");
4547 TGeoVolume *forwardTrayCover = new TGeoVolume("ITSsuppSDDSideAForwTrayCover",
4548 forwardCover, medAl);
4550 forwardTrayCover->SetVisibility(kTRUE);
4551 forwardTrayCover->SetLineColor(kMagenta+1); // Purple
4552 forwardTrayCover->SetLineWidth(1);
4553 forwardTrayCover->SetFillColor(forwardTrayCover->GetLineColor());
4554 forwardTrayCover->SetFillStyle(4000); // 0% transparent
4556 TGeoVolume *externalTraySDD = new TGeoVolume("ITSsuppSDDSideAExternalTray",
4557 externalTray, medAl);
4559 externalTraySDD->SetVisibility(kTRUE);
4560 externalTraySDD->SetLineColor(6); // Purple
4561 externalTraySDD->SetLineWidth(1);
4562 externalTraySDD->SetFillColor(externalTraySDD->GetLineColor());
4563 externalTraySDD->SetFillStyle(4000); // 0% transparent
4565 TGeoVolume *externTrayCover = new TGeoVolume("ITSsuppSDDSideAExtTrayCover",
4566 externCover, medAntic);
4568 externTrayCover->SetVisibility(kTRUE);
4569 externTrayCover->SetLineColor(kMagenta+1); // Purple
4570 externTrayCover->SetLineWidth(1);
4571 externTrayCover->SetFillColor(externTrayCover->GetLineColor());
4572 externTrayCover->SetFillStyle(4000); // 0% transparent
4575 // Now build up the tray
4576 yloc = kForwardTrayTotalHeight - forwardCover->GetY(3) +
4577 kExternTrayTotalHeight +
4578 kExternCoverSideThick - kForwardTrayTailHeight;
4579 zloc = kTrayAZToSupportRing - kForwardCoverLength;
4580 cableTrayA->AddNode(forwardTrayCover, 1,
4581 new TGeoTranslation( 0, yloc, zloc) );
4583 Double_t totalhi = kExternTrayTotalHeight + kExternCoverThick
4584 - kExternCoverYTrans;
4586 yloc = totalhi*(1 - CosD(kTrayAZRot));
4587 zloc = kExternTrayZTrans + totalhi*SinD(kTrayAZRot);
4588 cableTrayA->AddNode(externalTraySDD, 1,
4589 new TGeoCombiTrans( 0, yloc, zloc,
4590 new TGeoRotation("", 0,-kTrayAZRot, 0) ) );
4592 yloc = kExternTrayTotalHeight - kExternCoverYTrans;
4593 zloc = kExternTrayZTrans - yloc*SinD(kTrayAZRot);
4594 yloc *= CosD(kTrayAZRot);
4595 zloc += totalhi*SinD(kTrayAZRot);
4596 yloc += totalhi*(1 - CosD(kTrayAZRot));
4597 cableTrayA->AddNode(externTrayCover,1,
4598 new TGeoCombiTrans( 0, yloc, zloc,
4599 new TGeoRotation("", 0,-kTrayAZRot, 0) ) );
4602 // Finally put everything in the mother volume
4603 alpharot = -kTrayAFirstRotAng;
4604 xloc = kTrayARTrans*SinD(alpharot);
4605 yloc = kTrayARTrans*CosD(alpharot);
4606 zloc = kTrayAZTrans;
4607 moth->AddNode(cableTrayA,1,
4608 new TGeoCombiTrans( xloc, yloc, zloc,
4609 new TGeoRotation("",-alpharot,0,0) ) );
4612 xloc = kTrayARTrans*SinD(alpharot);
4613 yloc = kTrayARTrans*CosD(alpharot);
4614 moth->AddNode(cableTrayA,2,
4615 new TGeoCombiTrans( xloc, yloc, zloc,
4616 new TGeoRotation("",-alpharot,0,0) ) );
4618 alpharot = kTrayAFirstRotAng + 2*kTrayASecondRotAng;
4619 xloc = kTrayARTrans*SinD(alpharot);
4620 yloc = kTrayARTrans*CosD(alpharot);
4621 moth->AddNode(cableTrayA,3,
4622 new TGeoCombiTrans( xloc, yloc, zloc,
4623 new TGeoRotation("",-alpharot,0,0) ) );
4626 xloc = kTrayARTrans*SinD(alpharot);
4627 yloc = kTrayARTrans*CosD(alpharot);
4628 moth->AddNode(cableTrayA,4,
4629 new TGeoCombiTrans( xloc, yloc, zloc,
4630 new TGeoRotation("",-alpharot,0,0) ) );
4632 // To avoid putting an assembly inside another assembly,
4633 // the forwardTray is put directly in the mother volume
4634 Double_t rforw = kTrayARTrans + kExternTrayTotalHeight +
4635 kExternCoverSideThick -
4636 kForwardTrayTailHeight;
4638 alpharot = -kTrayAFirstRotAng;
4639 xloc = rforw*SinD(alpharot);
4640 yloc = rforw*CosD(alpharot);
4641 zloc = kTrayAZTrans + kTrayAZToSupportRing - kForwardTrayUpperLength;
4643 moth->AddNode(forwardTray,1,
4644 new TGeoCombiTrans( xloc, yloc, zloc,
4645 new TGeoRotation("",-alpharot,0,0) ) );
4648 xloc = rforw*SinD(alpharot);
4649 yloc = rforw*CosD(alpharot);
4650 moth->AddNode(forwardTray,2,
4651 new TGeoCombiTrans( xloc, yloc, zloc,
4652 new TGeoRotation("",-alpharot,0,0) ) );
4654 alpharot = kTrayAFirstRotAng + 2*kTrayASecondRotAng;
4655 xloc = rforw*SinD(alpharot);
4656 yloc = rforw*CosD(alpharot);
4657 moth->AddNode(forwardTray,3,
4658 new TGeoCombiTrans( xloc, yloc, zloc,
4659 new TGeoRotation("",-alpharot,0,0) ) );
4662 xloc = rforw*SinD(alpharot);
4663 yloc = rforw*CosD(alpharot);
4664 moth->AddNode(forwardTray,4,
4665 new TGeoCombiTrans( xloc, yloc, zloc,
4666 new TGeoRotation("",-alpharot,0,0) ) );
4672 //______________________________________________________________________
4673 void AliITSv11GeometrySupport::SDDCableTraysSideC(TGeoVolume *moth,
4676 // Creates the SDD cable trays which are outside the ITS support cones
4677 // but still inside the TPC on Side C
4678 // (part of this code is taken or anyway inspired to ServicesCableSupport
4679 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
4682 // moth : the TGeoVolume owing the volume structure
4683 // mgr : the GeoManager (default gGeoManager)
4686 // Created: ??? Bjorn S. Nilsen
4687 // Updated: 17 Apr 2010 Mario Sitta
4689 // Technical data are taken from AutoCAD drawings and other (oral)
4690 // information given by F.Tosello
4693 // Dimensions and positions of the C-Side Cable Tray elements
4694 const Int_t kNumTraySideC = 4;
4696 const Double_t kSideCFoldAngle = 5.00 *fgkDegree;
4698 // Overall position and rotation of the C-Side Cable Trays
4699 const Double_t kTraySideCRPos = 45.30 *fgkcm;
4700 const Double_t kTraySideCZPos = -102.40 *fgkcm;
4701 const Double_t kTraySideCAlphaRot[kNumTraySideC] = { -23.0, 59.0,
4702 /* from SSD tray position */ 180.-23.0, 180.+59.0};
4706 // Double_t xprof[12], yprof[12];
4707 Double_t xloc, yloc, alpharot, alphafold;
4710 // The assembly holding the metallic structure
4711 // We need four of them because the content is different
4712 TGeoVolumeAssembly *trayStructure[kNumTraySideC];
4713 for (Int_t jt = 0; jt < kNumTraySideC; jt++) {
4715 sprintf(name,"ITSsupportSDDTrayC%d",jt);
4716 trayStructure[jt] = CreateSDDSSDTraysSideC(name);
4720 // We have all shapes: now create the real volumes
4721 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
4722 if (0==1) medAl->Print();
4724 // Finally put everything in the mother volume
4725 alphafold = kSideCFoldAngle;
4727 for (Int_t jt = 0; jt < kNumTraySideC; jt++) {
4728 alpharot = kTraySideCAlphaRot[jt];
4729 xloc = kTraySideCRPos*SinD(alpharot);
4730 yloc = kTraySideCRPos*CosD(alpharot);
4731 moth->AddNode(trayStructure[jt],1,
4732 new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos,
4733 new TGeoRotation("",-90.+alpharot,-90.,90.+alphafold)));
4741 //______________________________________________________________________
4742 void AliITSv11GeometrySupport::SSDCableTraysSideA(TGeoVolume *moth,
4745 // Creates the SSD cable trays which are outside the ITS support cones
4746 // but still inside the TPC on Side A
4747 // (part of this code is taken or anyway inspired to ServicesCableSupport
4748 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
4751 // moth : the TGeoVolume owing the volume structure
4752 // mgr : the GeoManager (default gGeoManager)
4755 // Created: ??? Bjorn S. Nilsen
4756 // Updated: 30 Dec 2009 Mario Sitta
4758 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
4759 // drawings and other (oral) information given by F.Tosello and
4760 // Ton van den Brink
4761 // Cables and cooling tubes are approximated with proper materials and
4762 // rectangular cross sections, always preserving the total material budget.
4765 // Dimensions and positions of the A-Side Cable Trays
4766 // (parts of 0872/G/D)
4767 const Double_t kTrayARTrans = 408.35 *fgkmm;
4768 const Double_t kTrayAZTrans = 1011.00 *fgkmm;
4769 const Double_t kForwardSideYTrans = 12.00 *fgkmm;//!!!TO BE CHECKED!!!
4770 const Double_t kCoversYTrans = 2.00 *fgkmm;
4771 const Double_t kTrayAZRot = (180-169.5);// Degrees
4772 const Double_t kTrayAFirstRotAng = 22.00; // Degrees
4773 const Double_t kTrayASecondRotAng = 15.00; // Degrees
4775 const Double_t kTrayTotalHeight = 52.00 *fgkmm;
4776 const Double_t kTrayHeighToBend = 32.00 *fgkmm;
4777 const Double_t kTrayWidth = 130.00 *fgkmm;
4778 const Double_t kTrayThick = 2.00 *fgkmm;
4780 const Double_t kTrayBendAngle = 22.00 *TMath::DegToRad();
4782 const Double_t kForwardTrayTotalLen = 853.00 *fgkmm;
4783 const Double_t kForwardTrayFirstLen = 350.00 *fgkmm;
4784 const Double_t kForwardTrayFirstHeight = 47.00 *fgkmm;
4785 const Double_t kForwardCoverLen = 420.00 *fgkmm;
4787 const Double_t kForwardSideLength = kForwardTrayFirstLen;//!!!TO BE CHECKED!!!
4788 const Double_t kForwardSideHeight = 90.00 *fgkmm;//!!!TO BE CHECKED!!!
4789 const Double_t kForwardSideThick = 1.00 *fgkmm;//!!!TO BE CHECKED!!!
4790 const Double_t kForwardCoverHeight = 10.00 *fgkmm;//!!!TO BE CHECKED!!!
4792 const Double_t kExternalTrayTotalLen = 1200.00 *fgkmm;
4793 const Double_t kExternalCoverLen = kExternalTrayTotalLen;
4794 const Double_t kExternalCoverThick = 5.00 *fgkmm;
4796 const Int_t kForwardTrayNpoints = 16;
4798 const Double_t kServicesWidth = 100.00 *fgkmm;
4799 const Double_t kCopperHeight = 11.20 *fgkmm;// 1120 mm^2
4800 const Double_t kCablePlasticHeight = 11.50 *fgkmm;// 1150 mm^2
4801 const Double_t kCoolingWaterHeight = 2.65 *fgkmm;// 265 mm^2
4802 const Double_t kPoliUrethaneHeight = 4.62 *fgkmm;// 462 mm^2
4806 Double_t xprof[kForwardTrayNpoints], yprof[kForwardTrayNpoints];
4807 Double_t xloc, yloc, zloc, alpharot, totalhi;
4810 // The two tray components as assemblies
4811 TGeoVolumeAssembly *cableTrayAForw =
4812 new TGeoVolumeAssembly("ITSsupportSSDTrayAForw");
4813 TGeoVolumeAssembly *cableTrayAExt =
4814 new TGeoVolumeAssembly("ITSsupportSSDTrayAExt");
4817 // First create all needed shapes
4819 // The first part of the forward tray (part of 0872/G/D/07): a Xtru
4820 TGeoXtru *forwTrayPart1 = new TGeoXtru(2);
4822 xprof[3] = kTrayWidth/2;
4823 yprof[3] = kForwardTrayFirstHeight;
4824 xprof[2] = xprof[3] - kTrayThick;
4825 yprof[2] = yprof[3];
4826 xprof[4] = xprof[3];
4827 yprof[4] = kTrayTotalHeight - kTrayHeighToBend;
4828 xprof[5] = xprof[4] - yprof[4]*TMath::Tan(kTrayBendAngle);
4831 InsidePoint( xprof[3], yprof[3], xprof[4], yprof[4], xprof[5], yprof[5],
4832 -kTrayThick, xprof[1], yprof[1]);
4834 xprof[6] = -xprof[5];
4835 yprof[6] = yprof[5];
4837 InsidePoint( xprof[4], yprof[4], xprof[5], yprof[5], xprof[6], yprof[6],
4838 -kTrayThick, xprof[0], yprof[0]);
4840 // We did the right side, now reflex on the left side
4841 for (Int_t jp = 0; jp < 6; jp++) {
4842 xprof[6+jp] = -xprof[5-jp];
4843 yprof[6+jp] = yprof[5-jp];
4846 // And now the actual Xtru
4847 forwTrayPart1->DefinePolygon(12, xprof, yprof);
4848 forwTrayPart1->DefineSection(0, 0);
4849 forwTrayPart1->DefineSection(1, kForwardTrayFirstLen);
4851 // The second part of the forward tray (part of 0872/G/D/07): a Xtru
4852 TGeoXtru *forwTrayPart2 =
4853 CreateSDDSSDTraysSideA(kForwardTrayTotalLen - kForwardTrayFirstLen,
4856 // The external tray (as 0872/G/D/03): a Xtru with same profile
4857 TGeoXtru *externalTray = CreateSDDSSDTraysSideA(kExternalTrayTotalLen,
4860 // The side wall of the forward tray: a BBox
4861 TGeoBBox *forwSide = new TGeoBBox(kForwardSideThick/2,
4862 kForwardSideHeight/2,
4863 kForwardSideLength/2);
4865 // The side cover over the walls: a Xtru
4866 TGeoXtru *forwSideCover = new TGeoXtru(2);
4867 forwSideCover->SetName("ITSsuppSSDForwCover");
4869 xprof[0] = kTrayWidth/2 + 2*kForwardSideThick;
4870 yprof[0] = kForwardCoverHeight;
4871 xprof[1] = xprof[0];
4873 xprof[2] = xprof[1] - kForwardSideThick;
4874 yprof[2] = yprof[1];
4875 xprof[3] = xprof[2];
4876 yprof[3] = yprof[0] - kForwardSideThick;
4878 // We did the right side, now reflex on the left side
4879 for (Int_t jp = 0; jp < 4; jp++) {
4880 xprof[4+jp] = -xprof[3-jp];
4881 yprof[4+jp] = yprof[3-jp];
4884 forwSideCover->DefinePolygon(8, xprof, yprof);
4885 forwSideCover->DefineSection(0, 0);
4886 forwSideCover->DefineSection(1, kForwardSideLength);
4888 // The forward and external covers: two Composite Shape's
4889 TGeoCompositeShape *forwardCover = CreateTrayAForwardCover(kForwardCoverLen);
4891 TGeoCompositeShape *externCover = CreateTrayAExternalCover(kExternalCoverLen);
4893 // The cable copper inside the forward tray: a BBox
4894 TGeoBBox *forwCopper = new TGeoBBox(kServicesWidth/2,
4896 kForwardTrayTotalLen/2);
4898 // The cable copper inside the forward tray: a Xtru
4899 TGeoXtru *extCopper = new TGeoXtru(2);
4900 extCopper->SetName("ITSsuppSSDExtTrayCopper");
4902 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans
4905 xprof[0] = -totalhi*TanD(kTrayAZRot);
4906 yprof[0] = kTrayThick;
4907 xprof[1] = kExternalTrayTotalLen;
4908 yprof[1] = yprof[0];
4909 xprof[2] = xprof[1];
4910 yprof[2] = yprof[1] + kCopperHeight;
4911 totalhi -= kCopperHeight;
4912 xprof[3] = -totalhi*TanD(kTrayAZRot);
4913 yprof[3] = yprof[2];
4915 extCopper->DefinePolygon(4, xprof, yprof);
4916 extCopper->DefineSection(0, 0);
4917 extCopper->DefineSection(1, kServicesWidth);
4919 // The cable plastic inside the forward tray: a BBox
4920 TGeoBBox *forwPlastic = new TGeoBBox(kServicesWidth/2,
4921 kCablePlasticHeight/2,
4922 kForwardTrayTotalLen/2);
4924 // The cable plastic inside the forward tray: a Xtru
4925 TGeoXtru *extPlastic = new TGeoXtru(2);
4926 extPlastic->SetName("ITSsuppSSDExtTrayPlastic");
4928 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans
4929 - kTrayThick - kCopperHeight;
4931 xprof[0] = -totalhi*TanD(kTrayAZRot);
4932 yprof[0] = kTrayThick;
4933 xprof[1] = kExternalTrayTotalLen;
4934 yprof[1] = yprof[0];
4935 xprof[2] = xprof[1];
4936 yprof[2] = yprof[1] + kCablePlasticHeight;
4937 totalhi -= kCablePlasticHeight;
4938 xprof[3] = -totalhi*TanD(kTrayAZRot);
4939 yprof[3] = yprof[2];
4941 extPlastic->DefinePolygon(4, xprof, yprof);
4942 extPlastic->DefineSection(0, 0);
4943 extPlastic->DefineSection(1, kServicesWidth);
4945 // The cooling water inside the forward tray: a BBox
4946 TGeoBBox *forwWater = new TGeoBBox(kServicesWidth/2,
4947 kCoolingWaterHeight/2,
4948 kForwardTrayTotalLen/2);
4950 // The cooling water inside the forward tray: a Xtru
4951 TGeoXtru *extWater = new TGeoXtru(2);
4952 extWater->SetName("ITSsuppSSDExtTrayWater");
4954 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans
4955 - kTrayThick - kCopperHeight - kCablePlasticHeight;
4957 xprof[0] = -totalhi*TanD(kTrayAZRot);
4958 yprof[0] = kTrayThick;
4959 xprof[1] = kExternalTrayTotalLen;
4960 yprof[1] = yprof[0];
4961 xprof[2] = xprof[1];
4962 yprof[2] = yprof[1] + kCoolingWaterHeight;
4963 totalhi -= kCoolingWaterHeight;
4964 xprof[3] = -totalhi*TanD(kTrayAZRot);
4965 yprof[3] = yprof[2];
4967 extWater->DefinePolygon(4, xprof, yprof);
4968 extWater->DefineSection(0, 0);
4969 extWater->DefineSection(1, kServicesWidth);
4971 // The polyurethane inside the forward tray: a BBox
4972 TGeoBBox *forwPUR = new TGeoBBox(kServicesWidth/2,
4973 kPoliUrethaneHeight/2,
4974 kForwardTrayTotalLen/2);
4976 // The poliurethane inside the forward tray: a Xtru
4977 TGeoXtru *extPUR = new TGeoXtru(2);
4978 extPUR->SetName("ITSsuppSSDExtTrayPUR");
4980 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans
4981 - kTrayThick - kCopperHeight - kCablePlasticHeight
4982 - kCoolingWaterHeight;
4984 xprof[0] = -totalhi*TanD(kTrayAZRot);
4985 yprof[0] = kTrayThick;
4986 xprof[1] = kExternalTrayTotalLen;
4987 yprof[1] = yprof[0];
4988 xprof[2] = xprof[1];
4989 yprof[2] = yprof[1] + kPoliUrethaneHeight;
4990 totalhi -= kPoliUrethaneHeight;
4991 xprof[3] = -totalhi*TanD(kTrayAZRot);
4992 yprof[3] = yprof[2];
4994 extPUR->DefinePolygon(4, xprof, yprof);
4995 extPUR->DefineSection(0, 0);
4996 extPUR->DefineSection(1, kServicesWidth);
4999 // We have all shapes: now create the real volumes
5000 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
5001 TGeoMedium *medAntic = mgr->GetMedium("ITS_ANTICORODAL$");
5002 TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$");
5003 TGeoMedium *medFEP = mgr->GetMedium("ITS_SSD FEP$");
5004 TGeoMedium *medH2O = mgr->GetMedium("ITS_WATER$");
5005 TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$");
5007 TGeoVolume *forwTrayFirst = new TGeoVolume("ITSsuppSSDSideAForwTrayFirst",
5008 forwTrayPart1, medAl);
5010 forwTrayFirst->SetVisibility(kTRUE);
5011 forwTrayFirst->SetLineColor(6); // Purple
5012 forwTrayFirst->SetLineWidth(1);
5013 forwTrayFirst->SetFillColor(forwTrayFirst->GetLineColor());
5014 forwTrayFirst->SetFillStyle(4000); // 0% transparent
5016 TGeoVolume *forwTraySecond = new TGeoVolume("ITSsuppSSDSideAForwTraySecond",
5017 forwTrayPart2, medAl);
5019 forwTraySecond->SetVisibility(kTRUE);
5020 forwTraySecond->SetLineColor(6); // Purple
5021 forwTraySecond->SetLineWidth(1);
5022 forwTraySecond->SetFillColor(forwTraySecond->GetLineColor());
5023 forwTraySecond->SetFillStyle(4000); // 0% transparent
5025 TGeoVolume *forwTraySide = new TGeoVolume("ITSsuppSSDSideAForwTraySide",
5028 forwTraySide->SetVisibility(kTRUE);
5029 forwTraySide->SetLineColor(6); // Purple
5030 forwTraySide->SetLineWidth(1);
5031 forwTraySide->SetFillColor(forwTraySide->GetLineColor());
5032 forwTraySide->SetFillStyle(4000); // 0% transparent
5034 TGeoVolume *forwTraySideCover = new TGeoVolume("ITSsuppSSDSideAForwTraySideCover",
5035 forwSideCover, medAl);
5037 forwTraySideCover->SetVisibility(kTRUE);
5038 forwTraySideCover->SetLineColor(6); // Purple
5039 forwTraySideCover->SetLineWidth(1);
5040 forwTraySideCover->SetFillColor(forwTraySideCover->GetLineColor());
5041 forwTraySideCover->SetFillStyle(4000); // 0% transparent
5043 TGeoVolume *externalTraySSD = new TGeoVolume("ITSsuppSSDSideAExternalTray",
5044 externalTray, medAl);
5046 externalTraySSD->SetVisibility(kTRUE);
5047 externalTraySSD->SetLineColor(6); // Purple
5048 externalTraySSD->SetLineWidth(1);
5049 externalTraySSD->SetFillColor(externalTraySSD->GetLineColor());
5050 externalTraySSD->SetFillStyle(4000); // 0% transparent
5052 TGeoVolume *forwardTrayCover = new TGeoVolume("ITSsuppSSDSideAForwTrayCover",
5053 forwardCover, medAntic);
5055 forwardTrayCover->SetVisibility(kTRUE);
5056 forwardTrayCover->SetLineColor(kMagenta+1); // Purple
5057 forwardTrayCover->SetLineWidth(1);
5058 forwardTrayCover->SetFillColor(forwardTrayCover->GetLineColor());
5059 forwardTrayCover->SetFillStyle(4000); // 0% transparent
5061 TGeoVolume *externTrayCover = new TGeoVolume("ITSsuppSSDSideAExtTrayCover",
5062 externCover, medAntic);
5064 externTrayCover->SetVisibility(kTRUE);
5065 externTrayCover->SetLineColor(kMagenta+1); // Purple
5066 externTrayCover->SetLineWidth(1);
5067 externTrayCover->SetFillColor(externTrayCover->GetLineColor());
5068 externTrayCover->SetFillStyle(4000); // 0% transparent
5070 TGeoVolume *forwCableCu = new TGeoVolume("ITSsuppSSDSideAForwCableCu",
5073 forwCableCu->SetVisibility(kTRUE);
5074 forwCableCu->SetLineColor(kRed); // Red
5075 forwCableCu->SetLineWidth(1);
5076 forwCableCu->SetFillColor(forwCableCu->GetLineColor());
5077 forwCableCu->SetFillStyle(4000); // 0% transparent
5079 TGeoVolume *extCableCu = new TGeoVolume("ITSsuppSSDSideAExtCableCu",
5082 extCableCu->SetVisibility(kTRUE);
5083 extCableCu->SetLineColor(kRed); // Red
5084 extCableCu->SetLineWidth(1);
5085 extCableCu->SetFillColor(extCableCu->GetLineColor());
5086 extCableCu->SetFillStyle(4000); // 0% transparent
5088 TGeoVolume *forwCableFEP = new TGeoVolume("ITSsuppSSDSideAForwCableFEP",
5089 forwPlastic, medFEP);
5091 forwCableFEP->SetVisibility(kTRUE);
5092 forwCableFEP->SetLineColor(kYellow); // Yellow
5093 forwCableFEP->SetLineWidth(1);
5094 forwCableFEP->SetFillColor(forwCableFEP->GetLineColor());
5095 forwCableFEP->SetFillStyle(4000); // 0% transparent
5097 TGeoVolume *extCableFEP = new TGeoVolume("ITSsuppSSDSideAExtCableFEP",
5098 extPlastic, medFEP);
5100 extCableFEP->SetVisibility(kTRUE);
5101 extCableFEP->SetLineColor(kYellow); // Yellow
5102 extCableFEP->SetLineWidth(1);
5103 extCableFEP->SetFillColor(extCableFEP->GetLineColor());
5104 extCableFEP->SetFillStyle(4000); // 0% transparent
5106 TGeoVolume *forwTrayWater = new TGeoVolume("ITSsuppSSDSideAForwTrayWater",
5109 forwTrayWater->SetVisibility(kTRUE);
5110 forwTrayWater->SetLineColor(kBlue); // Blue
5111 forwTrayWater->SetLineWidth(1);
5112 forwTrayWater->SetFillColor(forwTrayWater->GetLineColor());
5113 forwTrayWater->SetFillStyle(4000); // 0% transparent
5115 TGeoVolume *extTrayWater = new TGeoVolume("ITSsuppSSDSideAExtTrayWater",
5118 extTrayWater->SetVisibility(kTRUE);
5119 extTrayWater->SetLineColor(kBlue); // Blue
5120 extTrayWater->SetLineWidth(1);
5121 extTrayWater->SetFillColor(extTrayWater->GetLineColor());
5122 extTrayWater->SetFillStyle(4000); // 0% transparent
5124 TGeoVolume *forwPolyUr = new TGeoVolume("ITSsuppSSDSideAForwPolyUr",
5127 forwPolyUr->SetVisibility(kTRUE);
5128 forwPolyUr->SetLineColor(kGray); // Gray
5129 forwPolyUr->SetLineWidth(1);
5130 forwPolyUr->SetFillColor(forwPolyUr->GetLineColor());
5131 forwPolyUr->SetFillStyle(4000); // 0% transparent
5133 TGeoVolume *extPolyUr = new TGeoVolume("ITSsuppSSDSideAExtPolyUr",
5136 extPolyUr->SetVisibility(kTRUE);
5137 extPolyUr->SetLineColor(kGray); // Gray
5138 extPolyUr->SetLineWidth(1);
5139 extPolyUr->SetFillColor(extPolyUr->GetLineColor());
5140 extPolyUr->SetFillStyle(4000); // 0% transparent
5143 // Now build up the tray
5144 cableTrayAForw->AddNode(forwTrayFirst, 1, 0);
5146 cableTrayAForw->AddNode(forwTraySecond, 1,
5147 new TGeoTranslation(0, 0, kForwardTrayFirstLen) );
5149 xloc = kTrayWidth/2 + kForwardSideThick/2;
5150 yloc = kForwardTrayFirstHeight + kForwardSideHeight/2 - kForwardSideYTrans;
5151 zloc = kForwardSideLength/2;
5152 cableTrayAForw->AddNode(forwTraySide,1,
5153 new TGeoTranslation( xloc, yloc, zloc) );
5154 cableTrayAForw->AddNode(forwTraySide,2,
5155 new TGeoTranslation(-xloc, yloc, zloc) );
5157 yloc = kForwardTrayFirstHeight + kForwardSideHeight - kForwardSideYTrans
5158 - kForwardCoverHeight;
5159 cableTrayAForw->AddNode(forwTraySideCover,1,
5160 new TGeoTranslation(0, yloc, 0) );
5162 yloc = kTrayTotalHeight - kCoversYTrans;
5163 zloc = kForwardTrayTotalLen - kForwardCoverLen;
5164 cableTrayAForw->AddNode(forwardTrayCover,1,
5165 new TGeoTranslation(0, yloc, zloc) );
5167 yloc = kTrayThick + forwCopper->GetDY();
5168 zloc = forwCopper->GetDZ();
5169 cableTrayAForw->AddNode(forwCableCu, 1,
5170 new TGeoTranslation(0, yloc, zloc) );
5172 yloc = kTrayThick + kCopperHeight + forwPlastic->GetDY();
5173 zloc = forwPlastic->GetDZ();
5174 cableTrayAForw->AddNode(forwCableFEP, 1,
5175 new TGeoTranslation(0, yloc, zloc) );
5177 yloc = kTrayThick + kCopperHeight + kCablePlasticHeight + forwWater->GetDY();
5178 zloc = forwWater->GetDZ();
5179 cableTrayAForw->AddNode(forwTrayWater, 1,
5180 new TGeoTranslation(0, yloc, zloc) );
5182 yloc = kTrayThick + kCopperHeight + kCablePlasticHeight
5183 + kCoolingWaterHeight + forwPUR->GetDY();
5184 zloc = forwPUR->GetDZ();
5185 cableTrayAForw->AddNode(forwPolyUr, 1,
5186 new TGeoTranslation(0, yloc, zloc) );
5188 // To simplify following placement in MARS, origin is on top
5189 totalhi = kTrayTotalHeight + kExternalCoverThick - kCoversYTrans;
5192 cableTrayAExt->AddNode(externalTraySSD, 1,
5193 new TGeoTranslation(0, yloc, 0) );
5195 yloc = -totalhi + kTrayTotalHeight - kCoversYTrans;
5196 cableTrayAExt->AddNode(externTrayCover,1,
5197 new TGeoTranslation(0, yloc, 0) );
5199 xloc = extCopper->GetDZ();
5201 cableTrayAExt->AddNode(extCableCu,1,
5202 new TGeoCombiTrans( xloc, yloc, 0,
5203 new TGeoRotation("",-90, 90, 90) ) );
5205 xloc = extPlastic->GetDZ();
5206 yloc = -totalhi + kCopperHeight;
5207 cableTrayAExt->AddNode(extCableFEP,1,
5208 new TGeoCombiTrans( xloc, yloc, 0,
5209 new TGeoRotation("",-90, 90, 90) ) );
5211 xloc = extWater->GetDZ();
5212 yloc = -totalhi + kCopperHeight + kCablePlasticHeight;
5213 cableTrayAExt->AddNode(extTrayWater,1,
5214 new TGeoCombiTrans( xloc, yloc, 0,
5215 new TGeoRotation("",-90, 90, 90) ) );
5217 xloc = extPUR->GetDZ();
5218 yloc = -totalhi + kCopperHeight + kCablePlasticHeight + kCoolingWaterHeight;
5219 cableTrayAExt->AddNode(extPolyUr,1,
5220 new TGeoCombiTrans( xloc, yloc, 0,
5221 new TGeoRotation("",-90, 90, 90) ) );
5224 // Finally put everything in the mother volume
5225 zloc = kTrayAZTrans;
5226 Double_t zlocext = zloc + kForwardTrayTotalLen;
5227 Double_t rExtTray = kTrayARTrans + kTrayTotalHeight;
5229 alpharot = kTrayAFirstRotAng;
5230 xloc = kTrayARTrans*SinD(alpharot);
5231 yloc = kTrayARTrans*CosD(alpharot);
5232 moth->AddNode(cableTrayAForw,1,
5233 new TGeoCombiTrans( xloc, yloc, zloc,
5234 new TGeoRotation("",-alpharot,0,0) ) );
5235 xloc = rExtTray*SinD(alpharot);
5236 yloc = rExtTray*CosD(alpharot);
5237 moth->AddNode(cableTrayAExt,1,
5238 new TGeoCombiTrans( xloc, yloc, zlocext,
5239 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
5242 xloc = kTrayARTrans*SinD(alpharot);
5243 yloc = kTrayARTrans*CosD(alpharot);
5244 moth->AddNode(cableTrayAForw,2,
5245 new TGeoCombiTrans( xloc, yloc, zloc,
5246 new TGeoRotation("",-alpharot,0,0) ) );
5247 xloc = rExtTray*SinD(alpharot);
5248 yloc = rExtTray*CosD(alpharot);
5249 moth->AddNode(cableTrayAExt,2,
5250 new TGeoCombiTrans( xloc, yloc, zlocext,
5251 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
5253 alpharot = -kTrayAFirstRotAng - 2*kTrayASecondRotAng;
5254 xloc = kTrayARTrans*SinD(alpharot);
5255 yloc = kTrayARTrans*CosD(alpharot);
5256 moth->AddNode(cableTrayAForw,3,
5257 new TGeoCombiTrans( xloc, yloc, zloc,
5258 new TGeoRotation("",-alpharot,0,0) ) );
5259 xloc = rExtTray*SinD(alpharot);
5260 yloc = rExtTray*CosD(alpharot);
5261 moth->AddNode(cableTrayAExt,3,
5262 new TGeoCombiTrans( xloc, yloc, zlocext,
5263 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
5266 xloc = kTrayARTrans*SinD(alpharot);
5267 yloc = kTrayARTrans*CosD(alpharot);
5268 moth->AddNode(cableTrayAForw,4,
5269 new TGeoCombiTrans( xloc, yloc, zloc,
5270 new TGeoRotation("",-alpharot,0,0) ) );
5271 xloc = rExtTray*SinD(alpharot);
5272 yloc = rExtTray*CosD(alpharot);
5273 moth->AddNode(cableTrayAExt,4,
5274 new TGeoCombiTrans( xloc, yloc, zlocext,
5275 new TGeoRotation("",-alpharot,-kTrayAZRot,0) ) );
5281 //______________________________________________________________________
5282 void AliITSv11GeometrySupport::SSDCableTraysSideC(TGeoVolume *moth,
5285 // Creates the SSD cable trays which are outside the ITS support cones
5286 // but still inside the TPC on Side C
5287 // (part of this code is taken or anyway inspired to ServicesCableSupport
5288 // method of AliITSv11GeometrySupport.cxx,v 1.9 2007/06/06)
5291 // moth : the TGeoVolume owing the volume structure
5292 // mgr : the GeoManager (default gGeoManager)
5295 // Created: ??? Bjorn S. Nilsen
5296 // Updated: 15 Apr 2010 Mario Sitta
5298 // Technical data are taken from AutoCAD drawings and other (oral)
5299 // information given by F.Tosello
5302 // Dimensions and positions of the C-Side Cable Tray elements
5303 const Int_t kNumTraySideC = 4;
5305 const Double_t kSideCFoldAngle = 5.00 *fgkDegree;
5307 const Double_t kServicesWidth = 100.00 *fgkmm;
5308 const Double_t kCopperHeight = 11.20 *fgkmm;// 1120 mm^2
5309 const Double_t kCablePlasticHeight = 11.50 *fgkmm;// 1150 mm^2
5310 const Double_t kCoolingWaterHeight = 2.65 *fgkmm;// 265 mm^2
5311 const Double_t kPoliUrethaneHeight = 4.62 *fgkmm;// 462 mm^2
5313 // Overall position and rotation of the C-Side Cable Trays
5314 const Double_t kTraySideCRPos = 45.30 *fgkcm;
5315 const Double_t kTraySideCZPos = -102.40 *fgkcm;
5316 const Double_t kTraySideCAlphaRot[kNumTraySideC] = { 23.0, -59.0,
5317 /* from Patch panel position */ 180.+23.0, 180.-59.0};
5321 Double_t xprof[6], yprof[6];
5322 Double_t xloc, yloc, alpharot, alphafold;
5325 // The assembly holding the metallic structure
5326 TGeoVolumeAssembly *trayStructure =
5327 CreateSDDSSDTraysSideC("ITSsupportSSDTrayC");
5329 // The cable copper inside the tray: a Xtru
5330 TGeoXtru *copper = new TGeoXtru(2);
5331 copper->SetName("ITSsuppSSDTrayCCopper");
5333 // Copper lies on the lower plate: get position of its points
5334 TGeoXtru *lowerplate = (TGeoXtru*)(mgr->GetVolume("ITSsuppTraySideCLower")->GetShape());
5335 xprof[0] = lowerplate->GetX(5);
5336 yprof[0] = lowerplate->GetY(5);
5337 xprof[1] = lowerplate->GetX(4);
5338 yprof[1] = lowerplate->GetY(4);
5339 xprof[2] = lowerplate->GetX(3);
5340 yprof[2] = lowerplate->GetY(3);
5341 xprof[3] = xprof[2] - kCopperHeight*SinD(kSideCFoldAngle);
5342 yprof[3] = yprof[2] + kCopperHeight*CosD(kSideCFoldAngle);
5343 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5344 kCopperHeight , xprof[4], yprof[4]);
5345 xprof[5] = xprof[0];
5346 yprof[5] = yprof[0] + kCopperHeight;
5348 copper->DefinePolygon(6, xprof, yprof);
5349 copper->DefineSection(0, -kServicesWidth/2);
5350 copper->DefineSection(1, kServicesWidth/2);
5352 // The cable plastic inside the tray: a Xtru
5353 TGeoXtru *plastic = new TGeoXtru(2);
5354 plastic->SetName("ITSsuppSSDTrayCPlastic");
5356 xprof[0] = copper->GetX(5);
5357 yprof[0] = copper->GetY(5);
5358 xprof[1] = copper->GetX(4);
5359 yprof[1] = copper->GetY(4);
5360 xprof[2] = copper->GetX(3);
5361 yprof[2] = copper->GetY(3);
5362 xprof[3] = xprof[2] - kCablePlasticHeight*SinD(kSideCFoldAngle);
5363 yprof[3] = yprof[2] + kCablePlasticHeight*CosD(kSideCFoldAngle);
5364 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5365 kCablePlasticHeight , xprof[4], yprof[4]);
5366 xprof[5] = xprof[0];
5367 yprof[5] = yprof[0] + kCablePlasticHeight;
5369 plastic->DefinePolygon(6, xprof, yprof);
5370 plastic->DefineSection(0, -kServicesWidth/2);
5371 plastic->DefineSection(1, kServicesWidth/2);
5373 // The cooling water inside the tray: a Xtru
5374 TGeoXtru *water = new TGeoXtru(2);
5375 water->SetName("ITSsuppSSDTrayCWater");
5377 xprof[0] = plastic->GetX(5);
5378 yprof[0] = plastic->GetY(5);
5379 xprof[1] = plastic->GetX(4);
5380 yprof[1] = plastic->GetY(4);
5381 xprof[2] = plastic->GetX(3);
5382 yprof[2] = plastic->GetY(3);
5383 xprof[3] = xprof[2] - kCoolingWaterHeight*SinD(kSideCFoldAngle);
5384 yprof[3] = yprof[2] + kCoolingWaterHeight*CosD(kSideCFoldAngle);
5385 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5386 kCoolingWaterHeight , xprof[4], yprof[4]);
5387 xprof[5] = xprof[0];
5388 yprof[5] = yprof[0] + kCoolingWaterHeight;
5390 water->DefinePolygon(6, xprof, yprof);
5391 water->DefineSection(0, -kServicesWidth/2);
5392 water->DefineSection(1, kServicesWidth/2);
5394 // The poliurethane inside the tray: a Xtru
5395 TGeoXtru *PUR = new TGeoXtru(2);
5396 PUR->SetName("ITSsuppSSDTrayCPUR");
5398 xprof[0] = water->GetX(5);
5399 yprof[0] = water->GetY(5);
5400 xprof[1] = water->GetX(4);
5401 yprof[1] = water->GetY(4);
5402 xprof[2] = water->GetX(3);
5403 yprof[2] = water->GetY(3);
5404 xprof[3] = xprof[2] - kPoliUrethaneHeight*SinD(kSideCFoldAngle);
5405 yprof[3] = yprof[2] + kPoliUrethaneHeight*CosD(kSideCFoldAngle);
5406 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
5407 kPoliUrethaneHeight , xprof[4], yprof[4]);
5408 xprof[5] = xprof[0];
5409 yprof[5] = yprof[0] + kPoliUrethaneHeight;
5411 PUR->DefinePolygon(6, xprof, yprof);
5412 PUR->DefineSection(0, -kServicesWidth/2);
5413 PUR->DefineSection(1, kServicesWidth/2);
5416 // We have all shapes: now create the real volumes
5417 TGeoMedium *medCu = mgr->GetMedium("ITS_COPPER$");
5418 TGeoMedium *medFEP = mgr->GetMedium("ITS_SSD FEP$");
5419 TGeoMedium *medH2O = mgr->GetMedium("ITS_WATER$");
5420 TGeoMedium *medPUR = mgr->GetMedium("ITS_POLYURETHANE$");
5422 TGeoVolume *copperCable = new TGeoVolume("ITSsuppSSDSideCCableCu",
5425 copperCable->SetVisibility(kTRUE);
5426 copperCable->SetLineColor(kRed); // Red
5427 copperCable->SetLineWidth(1);
5428 copperCable->SetFillColor(copperCable->GetLineColor());
5429 copperCable->SetFillStyle(4000); // 0% transparent
5431 TGeoVolume *cableFEP = new TGeoVolume("ITSsuppSSDSideCCableFEP",
5434 cableFEP->SetVisibility(kTRUE);
5435 cableFEP->SetLineColor(kYellow); // Yellow
5436 cableFEP->SetLineWidth(1);
5437 cableFEP->SetFillColor(cableFEP->GetLineColor());
5438 cableFEP->SetFillStyle(4000); // 0% transparent
5440 TGeoVolume *trayWater = new TGeoVolume("ITSsuppSSDSideCTrayWater",
5443 trayWater->SetVisibility(kTRUE);
5444 trayWater->SetLineColor(kBlue); // Blue
5445 trayWater->SetLineWidth(1);
5446 trayWater->SetFillColor(trayWater->GetLineColor());
5447 trayWater->SetFillStyle(4000); // 0% transparent
5449 TGeoVolume *trayPolyUr = new TGeoVolume("ITSsuppSSDSideCPolyUr",
5452 trayPolyUr->SetVisibility(kTRUE);
5453 trayPolyUr->SetLineColor(kGray); // Gray
5454 trayPolyUr->SetLineWidth(1);
5455 trayPolyUr->SetFillColor(trayPolyUr->GetLineColor());
5456 trayPolyUr->SetFillStyle(4000); // 0% transparent
5459 // Now fill in the tray
5460 trayStructure->AddNode(copperCable,1,0);
5461 trayStructure->AddNode(cableFEP,1,0);
5462 trayStructure->AddNode(trayWater,1,0);
5463 trayStructure->AddNode(trayPolyUr,1,0);
5466 // Finally put everything in the mother volume
5467 alphafold = kSideCFoldAngle;
5469 for (Int_t jt = 0; jt < kNumTraySideC; jt++) {
5470 alpharot = kTraySideCAlphaRot[jt];
5471 xloc = kTraySideCRPos*SinD(alpharot);
5472 yloc = kTraySideCRPos*CosD(alpharot);
5473 moth->AddNode(trayStructure,jt+1,
5474 new TGeoCombiTrans(-xloc, yloc, kTraySideCZPos,
5475 new TGeoRotation("",-90.+alpharot,-90.,90.+alphafold)));
5482 //______________________________________________________________________
5483 TGeoVolumeAssembly* AliITSv11GeometrySupport::CreateSDDForwardTraySideA(TGeoManager *mgr){
5485 // Creates the forward SDD tray on Side A (0872/G/D/01)
5488 // mgr : the GeoManager (used only to get the proper material)
5492 // Return: a TGeoVolumeAssembly for the tray
5494 // Created: 08 Jan 2010 Mario Sitta
5496 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
5497 // drawings and other (oral) information given by F.Tosello
5500 // Dimensions of the A-Side Forward Cable Tray (0872/G/D/01)
5501 const Double_t kForwardTrayThick = 2.00 *fgkmm;
5502 const Double_t kForwardTraySideLength = 823.00 *fgkmm;
5503 const Double_t kForwardTrayTailLength = 212.00 *fgkmm;
5504 const Double_t kForwardTrayBaseHalfWide = 55.00 *fgkmm;
5505 const Double_t kForwardTrayNotchLength = 47.20 *fgkmm;
5506 const Double_t kForwardTrayNotchHeight = 25.00 *fgkmm;
5507 const Double_t kForwardTrayNotchDown = 10.00 *fgkmm;
5508 const Double_t kForwardTraySide1Height = 39.00 *fgkmm;
5509 const Double_t kForwardTraySide2Height = 26.00 *fgkmm;
5510 const Double_t kForwardTraySide2Expand = 10.50 *fgkmm;
5511 const Double_t kForwardTraySide3TailLen = 418.00 *fgkmm;
5512 const Double_t kForwardTraySide3TailHi = 31.00 *fgkmm;
5513 const Double_t kForwardTraySide3HeadLen = 425.00 *fgkmm;
5514 const Double_t kForwardTraySide3HeadHi = 72.00 *fgkmm;
5515 const Double_t kForwardTrayHorWingWide = 10.50 *fgkmm;
5516 const Double_t kForwardTrayVertWingWide = 15.00 *fgkmm;
5518 const Int_t kForwardTraySideNpoints = 9;
5522 Double_t xprof[kForwardTraySideNpoints], yprof[kForwardTraySideNpoints];
5523 Double_t ylen, zlen;
5524 Double_t xloc, yloc, zloc;
5527 // The tray has a very complex shape, so it is made by assembling
5528 // different elements (with some small simplifications): the result
5529 // is a TGeoAssembly returned to the caller
5530 TGeoVolumeAssembly *forwardTray = new TGeoVolumeAssembly("ITSsuppSDDForwardTray");
5532 // The tray base: a BBox
5533 zlen = (kForwardTraySideLength-kForwardTrayTailLength)/2;
5534 TGeoBBox *trayBase = new TGeoBBox(kForwardTrayBaseHalfWide,
5535 kForwardTrayThick/2, zlen);
5537 // The first part of the side wall: a Xtru
5538 TGeoXtru *traySide1 = new TGeoXtru(2);
5541 yprof[0] = kForwardTrayThick;
5542 xprof[1] = kForwardTraySideLength-kForwardTrayTailLength;
5543 yprof[1] = yprof[0];
5544 xprof[2] = kForwardTraySideLength;
5545 yprof[2] = kForwardTraySide1Height + kForwardTrayThick;
5547 yprof[3] = yprof[2];
5549 traySide1->DefinePolygon(4, xprof, yprof);
5550 traySide1->DefineSection(0, 0);
5551 traySide1->DefineSection(1, kForwardTrayThick);
5553 // The second part of the side wall: a Xtru
5554 TGeoXtru *traySide2 = new TGeoXtru(2);
5556 xprof[0] = kForwardTrayBaseHalfWide - kForwardTrayThick;
5557 yprof[0] = traySide1->GetY(2);
5558 xprof[1] = kForwardTrayBaseHalfWide;
5559 yprof[1] = yprof[0];
5560 xprof[2] = xprof[1] + kForwardTraySide2Expand;
5561 yprof[2] = yprof[1] + kForwardTraySide2Height;
5562 xprof[3] = xprof[2] - kForwardTrayThick;
5563 yprof[3] = yprof[2];
5565 traySide2->DefinePolygon(4, xprof, yprof);
5566 traySide2->DefineSection(0, 0);
5567 traySide2->DefineSection(1, kForwardTraySideLength);
5569 // The third part of the side wall: a Xtru
5570 TGeoXtru *traySide3 = new TGeoXtru(2);
5573 yprof[0] = traySide2->GetY(2);
5574 xprof[1] = kForwardTraySideLength;
5575 yprof[1] = yprof[0];
5576 xprof[2] = xprof[1];
5577 yprof[2] = yprof[1] + kForwardTraySide3TailHi - kForwardTrayThick;
5578 xprof[3] = xprof[2] - kForwardTraySide3TailLen - kForwardTrayThick;
5579 yprof[3] = yprof[2];
5580 xprof[4] = xprof[3];
5581 yprof[4] = yprof[3] + kForwardTraySide3HeadHi + kForwardTrayThick;
5582 xprof[5] = xprof[4] - kForwardTraySide3HeadLen;
5583 yprof[5] = yprof[4];
5584 xprof[6] = xprof[5];
5585 yprof[6] = yprof[5] - kForwardTrayNotchHeight;
5586 xprof[7] = xprof[6] + kForwardTrayNotchLength;
5587 yprof[7] = yprof[6];
5588 xprof[8] = xprof[7];
5589 yprof[8] = yprof[7] - kForwardTrayNotchDown;
5591 traySide3->DefinePolygon(9, xprof, yprof);
5592 traySide3->DefineSection(0, 0);
5593 traySide3->DefineSection(1, kForwardTrayThick);
5595 // The horizontal wing: a BBox
5596 TGeoBBox *trayHorWing = new TGeoBBox(kForwardTrayHorWingWide/2,
5597 kForwardTrayThick/2,
5598 kForwardTraySide3TailLen/2);
5600 // The vertical wing: a BBox
5601 ylen = (traySide3->GetY(4) - traySide3->GetY(3))/2;
5602 TGeoBBox *trayVertWing = new TGeoBBox(kForwardTrayVertWingWide/2,
5603 ylen, kForwardTrayThick/2);
5606 // We have all shapes: now create the real volumes
5607 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
5609 TGeoVolume *forwTrayBase = new TGeoVolume("ITSsuppSDDSideAForwTrayBase",
5612 forwTrayBase->SetVisibility(kTRUE);
5613 forwTrayBase->SetLineColor(6); // Purple
5614 forwTrayBase->SetLineWidth(1);
5615 forwTrayBase->SetFillColor(forwTrayBase->GetLineColor());
5616 forwTrayBase->SetFillStyle(4000); // 0% transparent
5618 TGeoVolume *forwTraySide1 = new TGeoVolume("ITSsuppSDDSideAForwTraySide1",
5621 forwTraySide1->SetVisibility(kTRUE);
5622 forwTraySide1->SetLineColor(6); // Purple
5623 forwTraySide1->SetLineWidth(1);
5624 forwTraySide1->SetFillColor(forwTraySide1->GetLineColor());
5625 forwTraySide1->SetFillStyle(4000); // 0% transparent
5627 TGeoVolume *forwTraySide2 = new TGeoVolume("ITSsuppSDDSideAForwTraySide2",
5630 forwTraySide2->SetVisibility(kTRUE);
5631 forwTraySide2->SetLineColor(6); // Purple
5632 forwTraySide2->SetLineWidth(1);
5633 forwTraySide2->SetFillColor(forwTraySide2->GetLineColor());
5634 forwTraySide2->SetFillStyle(4000); // 0% transparent
5636 TGeoVolume *forwTraySide3 = new TGeoVolume("ITSsuppSDDSideAForwTraySide3",
5639 forwTraySide3->SetVisibility(kTRUE);
5640 forwTraySide3->SetLineColor(6); // Purple
5641 forwTraySide3->SetLineWidth(1);
5642 forwTraySide3->SetFillColor(forwTraySide3->GetLineColor());
5643 forwTraySide3->SetFillStyle(4000); // 0% transparent
5645 TGeoVolume *forwTrayHWing = new TGeoVolume("ITSsuppSDDSideAForwTrayHorWing",
5646 trayHorWing, medAl);
5648 forwTrayHWing->SetVisibility(kTRUE);
5649 forwTrayHWing->SetLineColor(6); // Purple
5650 forwTrayHWing->SetLineWidth(1);
5651 forwTrayHWing->SetFillColor(forwTrayHWing->GetLineColor());
5652 forwTrayHWing->SetFillStyle(4000); // 0% transparent
5654 TGeoVolume *forwTrayVWing = new TGeoVolume("ITSsuppSDDSideAForwTrayVertWing",
5655 trayVertWing, medAl);
5657 forwTrayVWing->SetVisibility(kTRUE);
5658 forwTrayVWing->SetLineColor(6); // Purple
5659 forwTrayVWing->SetLineWidth(1);
5660 forwTrayVWing->SetFillColor(forwTrayVWing->GetLineColor());
5661 forwTrayVWing->SetFillStyle(4000); // 0% transparent
5664 // Now build up the tray
5665 yloc = kForwardTrayThick/2;
5667 forwardTray->AddNode(forwTrayBase, 1,
5668 new TGeoTranslation(0, yloc, zloc) );
5670 xloc = kForwardTrayBaseHalfWide;
5671 forwardTray->AddNode(forwTraySide1, 1,
5672 new TGeoCombiTrans(xloc, 0, 0,
5673 new TGeoRotation("",90,-90,-90)));
5674 xloc = -xloc + kForwardTrayThick;
5675 forwardTray->AddNode(forwTraySide1, 2,
5676 new TGeoCombiTrans(xloc, 0, 0,
5677 new TGeoRotation("",90,-90,-90)));
5679 forwardTray->AddNode(forwTraySide2, 1, 0);
5680 zloc = kForwardTraySideLength;
5681 forwardTray->AddNode(forwTraySide2, 2,
5682 new TGeoCombiTrans(0, 0, zloc,
5683 new TGeoRotation("",90,-180,-90)));
5685 xloc = kForwardTrayBaseHalfWide + kForwardTraySide2Expand;
5686 forwardTray->AddNode(forwTraySide3, 1,
5687 new TGeoCombiTrans(xloc, 0, 0,
5688 new TGeoRotation("",90,-90,-90)));
5689 xloc = -xloc + kForwardTrayThick;
5690 forwardTray->AddNode(forwTraySide3, 2,
5691 new TGeoCombiTrans(xloc, 0, 0,
5692 new TGeoRotation("",90,-90,-90)));
5694 xloc = kForwardTrayBaseHalfWide + kForwardTraySide2Expand
5695 - kForwardTrayHorWingWide/2;
5696 yloc = traySide3->GetY(2) + kForwardTrayThick/2;
5697 zloc = kForwardTraySideLength - trayHorWing->GetDZ();
5698 forwardTray->AddNode(forwTrayHWing, 1,
5699 new TGeoTranslation( xloc, yloc, zloc) );
5700 forwardTray->AddNode(forwTrayHWing, 2,
5701 new TGeoTranslation(-xloc, yloc, zloc) );
5703 xloc = kForwardTrayBaseHalfWide + kForwardTraySide2Expand
5704 - kForwardTrayVertWingWide/2;
5705 yloc = traySide3->GetY(2) + trayVertWing->GetDY();
5706 zloc = traySide3->GetX(3) + kForwardTrayThick/2;
5707 forwardTray->AddNode(forwTrayVWing, 1,
5708 new TGeoTranslation( xloc, yloc, zloc) );
5709 forwardTray->AddNode(forwTrayVWing, 2,
5710 new TGeoTranslation(-xloc, yloc, zloc) );
5716 //______________________________________________________________________
5717 TGeoCompositeShape* AliITSv11GeometrySupport::CreateTrayAForwardCover(const Double_t coverLen){
5719 // Creates the forward cover of the SDD and SSD cable trays on Side A
5723 // coverLen: the total length of the cover
5727 // Return: a TGeoCompositeShape for the cover
5729 // Created: 03 Jan 2010 Mario Sitta
5731 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
5732 // drawings and other (oral) information given by F.Tosello
5735 // Dimensions and positions of the A-Side Cable Tray Forward Cover
5737 const Double_t kForwardCoverWide = 130.00 *fgkmm;
5738 const Double_t kForwardCoverSideWide = 10.00 *fgkmm;
5739 const Double_t kForwardCoverHoleLen = 160.00 *fgkmm;
5740 const Double_t kForwardCoverHoleWide = 90.00 *fgkmm;
5741 const Double_t kForwardCoverHoleR10 = 10.00 *fgkmm;
5742 const Double_t kForwardCoverTotalThick = 5.00 *fgkmm;
5743 const Double_t kForwardCoverSideThick = 3.00 *fgkmm;
5744 const Double_t kForwardCoverInternThick = 2.00 *fgkmm;
5746 const Double_t kForwardCoverHoleZTrans = 40.00 *fgkmm;
5750 Double_t xprof[16], yprof[16];
5751 Double_t yloc, zloc;
5754 // The main shape: a Xtru
5755 TGeoXtru *forwCoverMain = new TGeoXtru(2);
5756 forwCoverMain->SetName("ITSsuppForwCoverMain");
5758 xprof[0] = kForwardCoverWide/2;
5759 yprof[0] = kForwardCoverTotalThick;
5760 xprof[1] = xprof[0];
5761 yprof[1] = yprof[0] - kForwardCoverSideThick;
5762 xprof[2] = xprof[1] - kForwardCoverSideWide;
5763 yprof[2] = yprof[1];
5764 xprof[3] = xprof[2];
5767 // We did the right side, now reflex on the left side
5768 for (Int_t jp = 0; jp < 4; jp++) {
5769 xprof[4+jp] = -xprof[3-jp];
5770 yprof[4+jp] = yprof[3-jp];
5773 // And now the actual Xtru
5774 forwCoverMain->DefinePolygon(8, xprof, yprof);
5775 forwCoverMain->DefineSection(0, 0);
5776 forwCoverMain->DefineSection(1, coverLen);
5778 // The hole: another Xtru (rounded corners approximated with segments)
5779 TGeoXtru *forwCoverHole = new TGeoXtru(2);
5780 forwCoverHole->SetName("ITSsuppForwCoverHole");
5782 CreateTrayACoverHolesShape(kForwardCoverHoleWide, kForwardCoverHoleLen,
5783 kForwardCoverHoleR10 , xprof, yprof);
5785 // And now the actual Xtru
5786 forwCoverHole->DefinePolygon(16, xprof, yprof);
5787 forwCoverHole->DefineSection(0, 0);
5788 forwCoverHole->DefineSection(1, kForwardCoverTotalThick-kForwardCoverInternThick);
5790 // Now the proper rototranslation matrices for the two holes
5791 yloc = kForwardCoverTotalThick-kForwardCoverInternThick-0.01;//Precision fix
5792 zloc = kForwardCoverHoleZTrans;
5793 TGeoCombiTrans *mf1 = new TGeoCombiTrans(0, yloc, zloc,
5794 new TGeoRotation("", 0, 90, 0) );
5795 mf1->SetName("mf1");
5796 mf1->RegisterYourself();
5798 zloc = coverLen - kForwardCoverHoleZTrans - kForwardCoverHoleLen;
5799 TGeoCombiTrans *mf2 = new TGeoCombiTrans(0, yloc, zloc,
5800 new TGeoRotation("", 0, 90, 0) );
5801 mf2->SetName("mf2");
5802 mf2->RegisterYourself();
5804 // Finally the actual cover shape
5805 TGeoCompositeShape *cover = new TGeoCompositeShape("ITSsuppForwardCoverMain",
5806 "ITSsuppForwCoverMain-ITSsuppForwCoverHole:mf1-ITSsuppForwCoverHole:mf2");
5811 //______________________________________________________________________
5812 TGeoCompositeShape* AliITSv11GeometrySupport::CreateTrayAExternalCover(const Double_t coverLen){
5814 // Creates the external cover of the SDD and SSD cable trays on Side A
5818 // coverLen: the total length of the cover
5822 // Return: a TGeoCompositeShape for the cover
5824 // Created: 03 Jan 2010 Mario Sitta
5826 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
5827 // drawings and other (oral) information given by F.Tosello
5830 // Dimensions and positions of the A-Side Cable Tray External Cover
5832 const Double_t kExternalCoverWide = 130.00 *fgkmm;
5833 const Double_t kExternalCoverSideWide = 10.00 *fgkmm;
5834 const Double_t kExternalCoverHoleLen1 = 262.00 *fgkmm;
5835 const Double_t kExternalCoverHoleLen2 = 280.00 *fgkmm;
5836 const Double_t kExternalCoverHoleLen3 = 205.00 *fgkmm;
5837 const Double_t kExternalCoverHoleLen4 = 55.00 *fgkmm;
5838 const Double_t kExternalCoverHoleWide = 90.00 *fgkmm;
5839 const Double_t kExternalCoverHoleR10 = 10.00 *fgkmm;
5840 const Double_t kExternalCoverTotalThick = 5.00 *fgkmm;
5841 const Double_t kExternalCoverSideThick = 3.00 *fgkmm;
5842 const Double_t kExternalCoverInternThick = 2.00 *fgkmm;
5844 const Double_t kExternalCoverHole1ZTrans = 28.00 *fgkmm;
5845 const Double_t kExternalCoverHolesZTrans = 20.00 *fgkmm;
5849 Double_t xprof[16], yprof[16];
5850 Double_t yloc, zloc;
5853 // The main shape: a Xtru
5854 TGeoXtru *externCoverMain = new TGeoXtru(2);
5855 externCoverMain->SetName("ITSsuppExternCoverMain");
5857 xprof[0] = kExternalCoverWide/2;
5858 yprof[0] = kExternalCoverTotalThick;
5859 xprof[1] = xprof[0];
5860 yprof[1] = yprof[0] - kExternalCoverSideThick;
5861 xprof[2] = xprof[1] - kExternalCoverSideWide;
5862 yprof[2] = yprof[1];
5863 xprof[3] = xprof[2];
5866 // We did the right side, now reflex on the left side
5867 for (Int_t jp = 0; jp < 4; jp++) {
5868 xprof[4+jp] = -xprof[3-jp];
5869 yprof[4+jp] = yprof[3-jp];
5872 // And now the actual Xtru
5873 externCoverMain->DefinePolygon(8, xprof, yprof);
5874 externCoverMain->DefineSection(0, 0);
5875 externCoverMain->DefineSection(1, coverLen);
5877 // The first hole: a Xtru (rounded corners approximated with segments)
5878 Double_t holethick = kExternalCoverTotalThick-kExternalCoverInternThick;
5880 TGeoXtru *extCoverHole1 = new TGeoXtru(2);
5881 extCoverHole1->SetName("ITSsuppExtCoverHole1");
5883 CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen1,
5884 kExternalCoverHoleR10 , xprof, yprof);
5886 extCoverHole1->DefinePolygon(16, xprof, yprof);
5887 extCoverHole1->DefineSection(0, 0);
5888 extCoverHole1->DefineSection(1, holethick);
5890 // The second (and third) hole: another Xtru
5891 TGeoXtru *extCoverHole2 = new TGeoXtru(2);
5892 extCoverHole2->SetName("ITSsuppExtCoverHole2");
5894 CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen2,
5895 kExternalCoverHoleR10 , xprof, yprof);
5897 extCoverHole2->DefinePolygon(16, xprof, yprof);
5898 extCoverHole2->DefineSection(0, 0);
5899 extCoverHole2->DefineSection(1, holethick);
5901 // The fourth hole: another Xtru
5902 TGeoXtru *extCoverHole3 = new TGeoXtru(2);
5903 extCoverHole3->SetName("ITSsuppExtCoverHole3");
5905 CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen3,
5906 kExternalCoverHoleR10 , xprof, yprof);
5908 extCoverHole3->DefinePolygon(16, xprof, yprof);
5909 extCoverHole3->DefineSection(0, 0);
5910 extCoverHole3->DefineSection(1, holethick);
5912 // The fifth and last hole: another Xtru
5913 TGeoXtru *extCoverHole4 = new TGeoXtru(2);
5914 extCoverHole4->SetName("ITSsuppExtCoverHole4");
5916 CreateTrayACoverHolesShape(kExternalCoverHoleWide, kExternalCoverHoleLen4,
5917 kExternalCoverHoleR10 , xprof, yprof);
5919 extCoverHole4->DefinePolygon(16, xprof, yprof);
5920 extCoverHole4->DefineSection(0, 0);
5921 extCoverHole4->DefineSection(1, holethick);
5923 // Now the proper rototranslation matrices for the holes
5924 yloc = kExternalCoverTotalThick - kExternalCoverInternThick-0.01;
5925 zloc = kExternalCoverHole1ZTrans;
5926 TGeoCombiTrans *me1 = new TGeoCombiTrans(0, yloc, zloc,
5927 new TGeoRotation("", 0, 90, 0) );
5928 me1->SetName("me1");
5929 me1->RegisterYourself();
5931 zloc += (kExternalCoverHoleLen1 + kExternalCoverHolesZTrans);
5932 TGeoCombiTrans *me2 = new TGeoCombiTrans(0, yloc, zloc,
5933 new TGeoRotation("", 0, 90, 0) );
5934 me2->SetName("me2");
5935 me2->RegisterYourself();
5937 zloc += (kExternalCoverHoleLen2 + kExternalCoverHolesZTrans);
5938 TGeoCombiTrans *me3 = new TGeoCombiTrans(0, yloc, zloc,
5939 new TGeoRotation("", 0, 90, 0) );
5940 me3->SetName("me3");
5941 me3->RegisterYourself();
5943 zloc += (kExternalCoverHoleLen2 + kExternalCoverHolesZTrans);
5944 TGeoCombiTrans *me4 = new TGeoCombiTrans(0, yloc, zloc,
5945 new TGeoRotation("", 0, 90, 0) );
5946 me4->SetName("me4");
5947 me4->RegisterYourself();
5949 zloc += (kExternalCoverHoleLen3 + kExternalCoverHolesZTrans);
5950 TGeoCombiTrans *me5 = new TGeoCombiTrans(0, yloc, zloc,
5951 new TGeoRotation("", 0, 90, 0) );
5952 me5->SetName("me5");
5953 me5->RegisterYourself();
5955 // Finally the actual cover shape
5956 TGeoCompositeShape *cover = new TGeoCompositeShape("ITSsuppExternCoverMain",
5957 "ITSsuppExternCoverMain-ITSsuppExtCoverHole1:me1-ITSsuppExtCoverHole2:me2-ITSsuppExtCoverHole2:me3-ITSsuppExtCoverHole3:me4-ITSsuppExtCoverHole4:me5");
5962 //______________________________________________________________________
5963 void AliITSv11GeometrySupport::CreateTrayACoverHolesShape(const Double_t wide,
5964 const Double_t length, const Double_t r10,
5965 Double_t *x, Double_t *y){
5967 // Creates the proper sequence of X and Y coordinates to determine
5968 // the base XTru polygon for the holes in the SDD and SSD tray covers
5969 // (here the rounded corners are approximated with segments)
5972 // wide : the hole wide
5973 // length : the hole length
5974 // r10 : the radius of the rounded corners
5977 // x, y : coordinate vectors [16]
5979 // Created: 03 Jan 2010 Mario Sitta
5981 // Caller must guarantee that x and y have the correct dimensions
5982 // (but being this a private method it's easy to tell)
5985 x[0] = wide/2 - r10;
5987 x[1] = x[0] + r10*SinD(30);
5988 y[1] = y[0] - r10*(1 - CosD(30));
5989 x[2] = x[0] + r10*SinD(60);
5990 y[2] = y[0] - r10*(1 - CosD(60));
5995 x[5] = x[4] - r10*(1 - CosD(30));
5996 y[5] = y[4] - r10*SinD(30);
5997 x[6] = x[4] - r10*(1 - CosD(60));
5998 y[6] = y[4] - r10*SinD(60);
6002 // We did the right side, now reflex on the left side
6003 for (Int_t jp = 0; jp < 8; jp++) {
6011 //______________________________________________________________________
6012 TGeoXtru* AliITSv11GeometrySupport::CreateSDDSSDTraysSideA(
6013 const Double_t trayLen,
6014 const Double_t trayHi){
6016 // Creates parts of the SDD and SSD Trays on Side A which are identical
6017 // (0872/G/D/03, part of 0872/G/D/07, 0872/G/C/11)
6020 // trayLen : the length of the tray part
6021 // trayHi : the height of the tray part
6025 // Return: a TGeoXtru
6027 // Created: 26 Feb 2010 Mario Sitta
6029 // Technical data are taken from AutoCAD drawings, L.Simonetti technical
6030 // drawings and other (oral) information given by F.Tosello
6033 // Dimensions and positions of the A-Side Cable Trays
6034 // (parts of 0872/G/C)
6035 const Double_t kTrayWidth = 130.00 *fgkmm;
6036 const Double_t kTrayWingWidth = 10.00 *fgkmm;
6037 const Double_t kTrayHeightToBend = 20.00 *fgkmm;
6038 const Double_t kTrayThick = 2.00 *fgkmm;
6040 const Double_t kTrayBendAngle = 22.00 *TMath::DegToRad();
6042 const Int_t kTrayNpoints = 16;
6045 Double_t xprof[kTrayNpoints], yprof[kTrayNpoints];
6048 // The tray shape: a Xtru
6049 TGeoXtru *trayPart = new TGeoXtru(2);
6051 xprof[2] = kTrayWidth/2 - kTrayThick;
6052 yprof[2] = trayHi - kTrayThick;
6053 xprof[3] = kTrayWidth/2 - kTrayWingWidth;
6054 yprof[3] = yprof[2];
6055 xprof[4] = xprof[3];
6057 xprof[5] = kTrayWidth/2;
6058 yprof[5] = yprof[4];
6059 xprof[6] = xprof[5];
6060 yprof[6] = kTrayHeightToBend;
6061 xprof[7] = xprof[6] - yprof[6]*TMath::Tan(kTrayBendAngle);
6064 InsidePoint( xprof[5], yprof[5], xprof[6], yprof[6], xprof[7], yprof[7],
6065 -kTrayThick, xprof[1], yprof[1]);
6067 xprof[8] = -xprof[7];
6068 yprof[8] = yprof[7];
6070 InsidePoint( xprof[6], yprof[6], xprof[7], yprof[7], xprof[8], yprof[8],
6071 -kTrayThick, xprof[0], yprof[0]);
6073 // We did the right side, now reflex on the left side
6074 for (Int_t jp = 0; jp < 8; jp++) {
6075 xprof[8+jp] = -xprof[7-jp];
6076 yprof[8+jp] = yprof[7-jp];
6079 // And now the actual Xtru
6080 trayPart->DefinePolygon(kTrayNpoints, xprof, yprof);
6081 trayPart->DefineSection(0, 0);
6082 trayPart->DefineSection(1, trayLen);
6088 //______________________________________________________________________
6089 TGeoVolumeAssembly* AliITSv11GeometrySupport::CreateSDDSSDTraysSideC(
6090 const char *trayName,
6094 // Creates the SDD and SSD Trays on Side C which are supposedly identical
6097 // trayName : the assembly name
6101 // Return: a TGeoVolumeAssembly
6103 // Created: 16 Apr 2010 Mario Sitta
6105 // Technical data are taken from AutoCAD drawings and other (oral)
6106 // information given by F.Tosello
6109 const Double_t kSideCHalfThick = 0.100 *fgkcm;
6110 const Double_t kSideCFoldAngle = 5.000 *TMath::DegToRad();
6112 const Double_t kSideCLength1 = 172.800 *fgkcm;
6113 const Double_t kSideCLength2 = 189.300 *fgkcm;
6114 const Double_t kSideCHalfWide = 6.350 *fgkcm;
6115 const Double_t kSideCHeight1 = 11.800 *fgkcm;
6116 const Double_t kSideCHeight2 = 4.300 *fgkcm;
6117 const Double_t kSideCSideLength1 = 10.800 *fgkcm;
6118 const Double_t kSideCSideLength2 = 63.800 *fgkcm;
6119 const Double_t kSideCSideHeight = 8.800 *fgkcm;
6120 const Int_t kNPointsLowerFace = 6;
6121 const Int_t kNPointsLateralFace = 9;
6123 const Double_t kSideCWingAHalfLen = 5.000 *fgkcm;
6124 const Double_t kSideCWingBHalfLen = 30.500 *fgkcm;
6125 const Double_t kSideCWingCHalfLen = 2.000 *fgkcm;
6126 const Double_t kSideCWingDHalfLen = 48.500 *fgkcm;
6127 const Double_t kSideCWingEHalfLen = 83.000 *fgkcm;
6128 const Double_t kSideCWingsHalfWide = 0.450 *fgkcm;
6130 const Int_t kNPointsCoverFace = 12;
6132 const Double_t kPlateHalfLen = 6.000 *fgkcm;
6133 const Double_t kPlateThick = 0.600 *fgkcm;
6134 const Double_t kPlateHeight = 4.200 *fgkcm;
6135 const Int_t kNPointsPlate = 6;
6137 const Double_t kBarCoolRmax = 0.4 *fgkcm;
6138 const Int_t kNumBarCool = 2;
6139 const Double_t kXShiftBarCool[kNumBarCool] = { 8.7, 13.0 };
6140 const Double_t kYShiftBarCool[kNumBarCool] = { 8.5, 5.0 };
6144 Double_t xprof[12], yprof[12];
6145 Double_t xloc, yloc, zloc, delta, alpharot;
6147 // The single C-Side Cable tray as an assembly
6148 TGeoVolumeAssembly *cableTrayC = new TGeoVolumeAssembly(trayName);
6150 // First create all needed shapes
6152 // The Cable Tray lower face: a Xtru
6153 TGeoXtru *sideCLowerFace = new TGeoXtru(2);
6157 xprof[1] = kSideCLength1;
6159 xprof[2] = xprof[1] + kSideCLength2*TMath::Cos(kSideCFoldAngle);
6160 yprof[2] = yprof[1] + kSideCLength2*TMath::Sin(kSideCFoldAngle);
6161 xprof[3] = xprof[2] - 2*kSideCHalfThick*TMath::Sin(kSideCFoldAngle);
6162 yprof[3] = yprof[2] + 2*kSideCHalfThick*TMath::Cos(kSideCFoldAngle);
6163 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
6164 2*kSideCHalfThick , xprof[4], yprof[4]);
6166 yprof[5] = 2*kSideCHalfThick;
6168 sideCLowerFace->DefinePolygon(kNPointsLowerFace, xprof, yprof);
6169 sideCLowerFace->DefineSection(0,-kSideCHalfWide);
6170 sideCLowerFace->DefineSection(1, kSideCHalfWide);
6172 // The Cable Tray lateral face: a Xtru
6173 TGeoXtru *sideCLateralFace = new TGeoXtru(2);
6177 xprof[1] = kSideCLength1;
6179 xprof[2] = xprof[1] + kSideCLength2*TMath::Cos(kSideCFoldAngle);
6180 yprof[2] = yprof[1] + kSideCLength2*TMath::Sin(kSideCFoldAngle);
6181 xprof[3] = xprof[2] - kSideCHeight2*TMath::Sin(kSideCFoldAngle);
6182 yprof[3] = yprof[2] + kSideCHeight2*TMath::Cos(kSideCFoldAngle);
6183 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
6184 kSideCHeight2, xprof[4], yprof[4]);
6185 xprof[5] = kSideCSideLength1 + kSideCSideLength2;
6186 yprof[5] = kSideCHeight2;
6187 xprof[6] = xprof[5];
6188 yprof[6] = kSideCSideHeight;
6189 xprof[7] = kSideCSideLength1;
6190 yprof[7] = kSideCHeight1;
6192 yprof[8] = yprof[7];
6194 sideCLateralFace->DefinePolygon(kNPointsLateralFace, xprof, yprof);
6195 sideCLateralFace->DefineSection(0,-kSideCHalfThick);
6196 sideCLateralFace->DefineSection(1, kSideCHalfThick);
6198 // The lateral wings: four BBox's
6199 TGeoBBox *sideCLateralWingA = new TGeoBBox(kSideCWingAHalfLen,
6201 kSideCWingsHalfWide);
6203 TGeoBBox *sideCLateralWingB = new TGeoBBox(kSideCWingBHalfLen,
6205 kSideCWingsHalfWide);
6207 TGeoBBox *sideCLateralWingC = new TGeoBBox(kSideCHalfThick, // With these
6208 kSideCWingCHalfLen, // X,Y avoid
6209 kSideCWingsHalfWide);//rotations
6211 TGeoBBox *sideCLateralWingD = new TGeoBBox(kSideCWingDHalfLen,
6213 kSideCWingsHalfWide);
6215 TGeoBBox *sideCLateralWingE = new TGeoBBox(kSideCWingEHalfLen,
6217 kSideCWingsHalfWide);
6219 // The connecting lower plate: a Xtru
6220 TGeoXtru *sideCLowerPlate = new TGeoXtru(2);
6224 xprof[1] = kPlateHalfLen;
6226 xprof[2] = xprof[1] + kPlateHalfLen*TMath::Cos(kSideCFoldAngle);
6227 yprof[2] = kPlateHalfLen*TMath::Sin(kSideCFoldAngle);
6228 xprof[3] = xprof[2] - kPlateThick*TMath::Sin(kSideCFoldAngle);
6229 yprof[3] = yprof[2] + kPlateThick*TMath::Cos(kSideCFoldAngle);
6230 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
6231 kPlateThick, xprof[4], yprof[4]);
6233 yprof[5] = kPlateThick;
6235 sideCLowerPlate->DefinePolygon(kNPointsPlate, xprof, yprof);
6236 Double_t zwide = kSideCHalfWide + 2*kSideCHalfThick;
6237 sideCLowerPlate->DefineSection(0,-zwide);
6238 sideCLowerPlate->DefineSection(1, zwide);
6240 // The connecting side plate: a Xtru
6241 TGeoXtru *sideCLateralPlate = new TGeoXtru(2);
6245 xprof[1] = kPlateHalfLen;
6247 xprof[2] = xprof[1] + kPlateHalfLen*TMath::Cos(kSideCFoldAngle);
6248 yprof[2] = kPlateHalfLen*TMath::Sin(kSideCFoldAngle);
6249 xprof[3] = xprof[2] - kPlateHeight*TMath::Sin(kSideCFoldAngle);
6250 yprof[3] = yprof[2] + kPlateHeight*TMath::Cos(kSideCFoldAngle);
6251 InsidePoint(xprof[0], yprof[0], xprof[1], yprof[1], xprof[2], yprof[2],
6252 kPlateHeight, xprof[4], yprof[4]); // Avoid small overlap
6254 yprof[5] = kPlateHeight;
6256 sideCLateralPlate->DefinePolygon(kNPointsPlate, xprof, yprof);
6257 sideCLateralPlate->DefineSection(0,-kPlateThick/2);
6258 sideCLateralPlate->DefineSection(1, kPlateThick/2);
6260 // The bar fixing the cooling tubes: a Tube
6261 TGeoTube *coolBar = new TGeoTube(0., kBarCoolRmax, kSideCHalfWide);
6263 // The Cable Tray cover: a (complex) Xtru
6264 TGeoXtru *sideCCoverFace = new TGeoXtru(2);
6266 xprof[ 0] = sideCLateralFace->GetX(8);
6267 yprof[ 0] = sideCLateralFace->GetY(8);
6268 xprof[ 1] = sideCLateralFace->GetX(7);
6269 yprof[ 1] = sideCLateralFace->GetY(7);
6270 xprof[ 2] = sideCLateralFace->GetX(6);
6271 yprof[ 2] = sideCLateralFace->GetY(6);
6272 xprof[ 3] = sideCLateralFace->GetX(5);
6273 yprof[ 3] = sideCLateralFace->GetY(5);
6274 xprof[ 4] = sideCLateralFace->GetX(4);
6275 yprof[ 4] = sideCLateralFace->GetY(4);
6277 xloc = (kSideCLength1 + (kSideCSideLength1+kSideCSideLength2))/2;
6278 delta = kSideCLength1 - (xloc + kSideCWingDHalfLen);
6279 xprof[ 5] = xprof[4]
6280 + (delta + 2*kSideCWingEHalfLen)*TMath::Cos(kSideCFoldAngle);
6281 yprof[ 5] = yprof[4]
6282 + (delta + 2*kSideCWingEHalfLen)*TMath::Sin(kSideCFoldAngle);
6284 xprof[ 6] = xprof[5] - 2*kSideCHalfThick*TMath::Sin(kSideCFoldAngle);
6285 yprof[ 6] = yprof[5] + 2*kSideCHalfThick*TMath::Cos(kSideCFoldAngle);
6286 InsidePoint(xprof[3], yprof[3], xprof[4], yprof[4], xprof[5], yprof[5],
6287 2*kSideCHalfThick, xprof[7], yprof[7]);
6288 InsidePoint(xprof[2], yprof[2], xprof[3], yprof[3], xprof[4], yprof[4],
6289 2*kSideCHalfThick, xprof[8], yprof[8]);
6290 xprof[ 9] = xprof[2] + 2*kSideCHalfThick;
6291 yprof[ 9] = yprof[2] + 2*kSideCHalfThick;
6292 xprof[10] = xprof[1];
6293 yprof[10] = yprof[1] + 2*kSideCHalfThick;
6294 xprof[11] = xprof[0];
6295 yprof[11] = yprof[0] + 2*kSideCHalfThick;
6297 sideCCoverFace->DefinePolygon(kNPointsCoverFace, xprof, yprof);
6298 zloc = kSideCHalfWide + 2*kSideCHalfThick + 2*kSideCWingsHalfWide;
6299 sideCCoverFace->DefineSection(0,-zloc);
6300 sideCCoverFace->DefineSection(1, zloc);
6303 // We have all shapes: now create the real volumes
6304 TGeoMedium *medAl = mgr->GetMedium("ITS_ALUMINUM$");
6306 TGeoVolume *traySideCLowerFace = new TGeoVolume("ITSsuppTraySideCLower",
6307 sideCLowerFace, medAl);
6309 traySideCLowerFace->SetVisibility(kTRUE);
6310 traySideCLowerFace->SetLineColor(6); // Purple
6311 traySideCLowerFace->SetLineWidth(1);
6312 traySideCLowerFace->SetFillColor(traySideCLowerFace->GetLineColor());
6313 traySideCLowerFace->SetFillStyle(4000); // 0% transparent
6315 TGeoVolume *traySideCLateralFace = new TGeoVolume("ITSsuppTraySideCLateral",
6316 sideCLateralFace, medAl);
6318 traySideCLateralFace->SetVisibility(kTRUE);
6319 traySideCLateralFace->SetLineColor(6); // Purple
6320 traySideCLateralFace->SetLineWidth(1);
6321 traySideCLateralFace->SetFillColor(traySideCLateralFace->GetLineColor());
6322 traySideCLateralFace->SetFillStyle(4000); // 0% transparent
6324 TGeoVolume *traySideCLateralWingA =
6325 new TGeoVolume("ITSsuppTraySideCLateralWingA", sideCLateralWingA, medAl);
6327 traySideCLateralWingA->SetVisibility(kTRUE);
6328 traySideCLateralWingA->SetLineColor(6); // Purple
6329 traySideCLateralWingA->SetLineWidth(1);
6330 traySideCLateralWingA->SetFillColor(traySideCLateralWingA->GetLineColor());
6331 traySideCLateralWingA->SetFillStyle(4000); // 0% transparent
6333 TGeoVolume *traySideCLateralWingB =
6334 new TGeoVolume("ITSsuppTraySideCLateralWingB", sideCLateralWingB, medAl);
6336 traySideCLateralWingB->SetVisibility(kTRUE);
6337 traySideCLateralWingB->SetLineColor(6); // Purple
6338 traySideCLateralWingB->SetLineWidth(1);
6339 traySideCLateralWingB->SetFillColor(traySideCLateralWingB->GetLineColor());
6340 traySideCLateralWingB->SetFillStyle(4000); // 0% transparent
6342 TGeoVolume *traySideCLateralWingC =
6343 new TGeoVolume("ITSsuppTraySideCLateralWingC", sideCLateralWingC, medAl);
6345 traySideCLateralWingC->SetVisibility(kTRUE);
6346 traySideCLateralWingC->SetLineColor(6); // Purple
6347 traySideCLateralWingC->SetLineWidth(1);
6348 traySideCLateralWingC->SetFillColor(traySideCLateralWingC->GetLineColor());
6349 traySideCLateralWingC->SetFillStyle(4000); // 0% transparent
6351 TGeoVolume *traySideCLateralWingD =
6352 new TGeoVolume("ITSsuppTraySideCLateralWingD", sideCLateralWingD, medAl);
6354 traySideCLateralWingD->SetVisibility(kTRUE);
6355 traySideCLateralWingD->SetLineColor(6); // Purple
6356 traySideCLateralWingD->SetLineWidth(1);
6357 traySideCLateralWingD->SetFillColor(traySideCLateralWingD->GetLineColor());
6358 traySideCLateralWingD->SetFillStyle(4000); // 0% transparent
6360 TGeoVolume *traySideCLateralWingE =
6361 new TGeoVolume("ITSsuppTraySideCLateralWingE", sideCLateralWingE, medAl);
6363 traySideCLateralWingE->SetVisibility(kTRUE);
6364 traySideCLateralWingE->SetLineColor(6); // Purple
6365 traySideCLateralWingE->SetLineWidth(1);
6366 traySideCLateralWingE->SetFillColor(traySideCLateralWingE->GetLineColor());
6367 traySideCLateralWingE->SetFillStyle(4000); // 0% transparent
6369 TGeoVolume *traySideCLowerPlate =
6370 new TGeoVolume("ITSsuppTraySideCLowerPlate", sideCLowerPlate, medAl);
6372 traySideCLowerPlate->SetVisibility(kTRUE);
6373 traySideCLowerPlate->SetLineColor(6); // Purple
6374 traySideCLowerPlate->SetLineWidth(1);
6375 traySideCLowerPlate->SetFillColor(traySideCLowerPlate->GetLineColor());
6376 traySideCLowerPlate->SetFillStyle(4000); // 0% transparent
6378 TGeoVolume *traySideCLateralPlate =
6379 new TGeoVolume("ITSsuppTraySideCLateralPlate", sideCLateralPlate, medAl);
6381 traySideCLateralPlate->SetVisibility(kTRUE);
6382 traySideCLateralPlate->SetLineColor(6); // Purple
6383 traySideCLateralPlate->SetLineWidth(1);
6384 traySideCLateralPlate->SetFillColor(traySideCLateralPlate->GetLineColor());
6385 traySideCLateralPlate->SetFillStyle(4000); // 0% transparent
6387 TGeoVolume *traySideCCoverFace =
6388 new TGeoVolume("ITSsuppTraySideCCoverFace", sideCCoverFace, medAl);
6390 traySideCCoverFace->SetVisibility(kTRUE);
6391 traySideCCoverFace->SetLineColor(6); // Purple
6392 traySideCCoverFace->SetLineWidth(1);
6393 traySideCCoverFace->SetFillColor(traySideCCoverFace->GetLineColor());
6394 traySideCCoverFace->SetFillStyle(4000); // 0% transparent
6396 TGeoVolume *coolingTubeBar = new TGeoVolume("ITSsuppTraySideCCoolBar",
6399 coolingTubeBar->SetVisibility(kTRUE);
6400 coolingTubeBar->SetLineColor(6); // Purple
6401 coolingTubeBar->SetLineWidth(1);
6402 coolingTubeBar->SetFillColor(coolingTubeBar->GetLineColor());
6403 coolingTubeBar->SetFillStyle(4000); // 0% transparent
6406 // Now build up the tray
6407 cableTrayC->AddNode(traySideCLowerFace,1,0);
6409 zloc = kSideCHalfWide + kSideCHalfThick;
6410 cableTrayC->AddNode(traySideCLateralFace,1,
6411 new TGeoTranslation(0., 0., zloc) );
6412 cableTrayC->AddNode(traySideCLateralFace,2,
6413 new TGeoTranslation(0., 0.,-zloc) );
6415 xloc = kSideCWingAHalfLen;
6416 yloc = kSideCHeight1 - kSideCHalfThick;
6417 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6418 cableTrayC->AddNode(traySideCLateralWingA,1,
6419 new TGeoTranslation(xloc, yloc, zloc) );
6420 cableTrayC->AddNode(traySideCLateralWingA,2,
6421 new TGeoTranslation(xloc, yloc,-zloc) );
6423 xloc = kSideCSideLength1 + kSideCSideLength2/2;
6424 yloc = Yfrom2Points(kSideCSideLength1,kSideCHeight1,
6425 kSideCSideLength1+kSideCSideLength2,kSideCSideHeight,
6426 xloc) - kSideCHalfThick -0.0012; // Avoid small overlap
6427 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6428 alpharot = (-(kSideCHeight1 - kSideCSideHeight)/kSideCSideLength2 )*
6430 cableTrayC->AddNode(traySideCLateralWingB,1,
6431 new TGeoCombiTrans(xloc, yloc, zloc,
6432 new TGeoRotation("",alpharot,0,0) ) );
6433 cableTrayC->AddNode(traySideCLateralWingB,2,
6434 new TGeoCombiTrans(xloc, yloc,-zloc,
6435 new TGeoRotation("",alpharot,0,0) ) );
6437 xloc = kSideCSideLength1 + kSideCSideLength2 - kSideCHalfThick;
6438 yloc = kSideCSideHeight - kSideCWingCHalfLen;
6439 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6440 cableTrayC->AddNode(traySideCLateralWingC,1,
6441 new TGeoTranslation(xloc, yloc, zloc) );
6442 cableTrayC->AddNode(traySideCLateralWingC,2,
6443 new TGeoTranslation(xloc, yloc,-zloc) );
6445 xloc = (kSideCLength1 + (kSideCSideLength1+kSideCSideLength2))/2;
6446 yloc = kSideCHeight2 - kSideCHalfThick;
6447 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6448 cableTrayC->AddNode(traySideCLateralWingD,1,
6449 new TGeoTranslation(xloc, yloc, zloc) );
6450 cableTrayC->AddNode(traySideCLateralWingD,2,
6451 new TGeoTranslation(xloc, yloc,-zloc) );
6453 delta = kSideCLength1 - (xloc + kSideCWingDHalfLen);
6454 xloc = kSideCLength1 + delta + kSideCWingEHalfLen;
6455 yloc = (xloc - kSideCLength1)*TMath::Tan(kSideCFoldAngle) +
6456 kSideCHeight2*TMath::Cos(kSideCFoldAngle) - kSideCHalfThick;
6457 zloc = kSideCHalfWide + 2*kSideCHalfThick + kSideCWingsHalfWide;
6458 alpharot = kSideCFoldAngle*TMath::RadToDeg();
6459 cableTrayC->AddNode(traySideCLateralWingE,1,
6460 new TGeoCombiTrans(xloc, yloc, zloc,
6461 new TGeoRotation("",alpharot,0,0) ) );
6462 cableTrayC->AddNode(traySideCLateralWingE,2,
6463 new TGeoCombiTrans(xloc, yloc,-zloc,
6464 new TGeoRotation("",alpharot,0,0) ) );
6466 xloc = kSideCLength1 - kPlateHalfLen;
6467 yloc = -kPlateThick -0.0025; // Avoid small overlap
6468 cableTrayC->AddNode(traySideCLowerPlate,1,
6469 new TGeoTranslation(xloc, yloc, 0.) );
6471 xloc = kSideCLength1 - kPlateHalfLen;
6472 yloc = -kPlateThick;
6473 zloc = kSideCHalfWide + 2*kSideCHalfThick + kPlateThick/2;
6474 cableTrayC->AddNode(traySideCLateralPlate,1,
6475 new TGeoTranslation(xloc, yloc, zloc) );
6476 cableTrayC->AddNode(traySideCLateralPlate,2,
6477 new TGeoTranslation(xloc, yloc,-zloc) );
6479 for (Int_t jc = 0; jc <kNumBarCool; jc++) {
6480 xloc = kXShiftBarCool[jc];
6481 yloc = kYShiftBarCool[jc];
6482 cableTrayC->AddNode(coolingTubeBar,jc+1,
6483 new TGeoTranslation(xloc, yloc, 0.) );
6486 cableTrayC->AddNode(traySideCCoverFace,1,0);
6489 // Finally return what we made up