2 - Contact: - henrik.tydesjo@cern.ch
3 - Link: - http://tydes.home.cern.ch/tydes/doc/CalibrationOverview/CalibrationAlgorithms/
4 - Run Type: - DAQ_MIN_TH_SCAN,DAQ_MEAN_TH_SCAN,DAQ_UNIFORMITY_SCAN,DAQ_NOISY_PIX_SCAN,DAQ_PIX_DELAY_SCAN,DAQ_FO_UNIF_SCAN
6 - Number of events needed:
7 - Input Files: - daq db config files: spd_standal_params,spd_perm_noisy , previous noisy lists: ./calibResults/ScanNoisy/* , raw data
8 - Output Files: - Ref Data: ./calibResults/ScanReference/* , DCS update: ./calibResults/ScanDCSconfigToFXS/* , OCDB update: ./calibResults/ScanNoisyToFXS/* , persistent files: ./calibResults/ScanNoisy/*
12 ////////////////////////////////////////////////////////////////////////////////
13 // This program can be compiled in two modes. //
15 // 1. With the DAQ DA framework on. This is the default operating mode. //
16 // Call this program with the name of the executable followed by the //
17 // data files to process. //
19 // 2. Without the DAQ DA framework on. Define the SPD_DA_OFF environment var. //
20 // Call this program with the name of the executable followed by the //
21 // runNr and the data files to process. //
23 ////////////////////////////////////////////////////////////////////////////////
32 #include "AliRawReaderDate.h"
33 #include "AliITSRawStreamSPD.h"
34 #include "AliITSOnlineSPDscan.h"
35 #include "AliITSOnlineSPDscanSingle.h"
36 #include "AliITSOnlineSPDscanMultiple.h"
37 #include "AliITSOnlineSPDscanMeanTh.h"
38 #include "AliITSOnlineSPDscanAnalyzer.h"
39 #include "AliITSOnlineCalibrationSPDhandler.h"
44 #include <TPluginManager.h>
45 #include <TObjArray.h>
48 int main(int argc, char **argv) {
50 printf("Wrong number of arguments\n");
54 // directory structure, hard coded
55 char *saveDirNoisy = "./calibResults/ScanNoisy"; // may NOT delete content
56 char *saveDirNoisyToFXS = "./calibResults/ScanNoisyToFXS"; // may delete content
57 char *saveDirDCSconfigToFXS= "./calibResults/ScanDCSconfigToFXS"; // may delete content
58 char *saveDirRef = "./calibResults/ScanReference"; // may delete content
59 char *saveDirIdsToFXS = "./calibResults/IdsToFXS"; // may delete content
60 char *configFilesDir = "./configFiles"; // may delete content
62 // make sure the directory structure is correct:
63 system("mkdir ./calibResults >& /dev/null");
64 system("mkdir ./calibResults/ScanNoisy >& /dev/null");
65 system("mkdir ./calibResults/ScanNoisyToFXS >& /dev/null");
66 system("mkdir ./calibResults/ScanDCSconfigToFXS >& /dev/null");
67 system("mkdir ./calibResults/ScanReference >& /dev/null");
68 system("mkdir ./calibResults/IdsToFXS >& /dev/null");
69 system("mkdir ./configFiles >& /dev/null");
70 // prameters config files
71 TString paramsFileName = Form("%s/standal_params.txt",configFilesDir);
72 TString permNoisyFileName = Form("%s/perm_noisy.txt",configFilesDir);
74 // This line is needed in case of a stand-alone application w/o
75 // $ROOTSYS/etc/system.rootrc file
76 gROOT->GetPluginManager()->AddHandler("TVirtualStreamerInfo",
82 // turn off annoying warning messages
84 AliLog::Instance()->SetGlobalDebugLevel(-20);
87 enum calib_types{MINTH,MEANTH,DAC,UNIMA,NOISE,DELAY};
90 // ********* STEP 0: Get configuration files from db (if there are any) , then read parameters*********
91 UInt_t nrTuningParams = 0;
92 TObjArray paramNames; paramNames.SetOwner(kTRUE);
93 TObjArray paramVals; paramVals.SetOwner(kTRUE);
98 TString idp = "spd_standal_params";
99 status=daqDA_DB_getFile(idp.Data(),paramsFileName.Data());
101 printf("Failed to get config file %s: status=%d. Using default tuning parameters.\n",idp.Data(),status);
106 paramsFile.open(paramsFileName.Data(), ifstream::in);
107 if (paramsFile.fail()) {
108 printf("No config file (%s) present. Using default tuning parameters.\n",paramsFileName.Data());
114 paramsFile >> paramN;
115 if (paramsFile.eof()) break;
116 paramsFile >> paramV;
117 TString* paramNS = new TString(paramN);
118 TString* paramVS = new TString(paramV);
119 paramNames.AddAtAndExpand((TObject*)paramNS,nrTuningParams);
120 paramVals.AddAtAndExpand((TObject*)paramVS,nrTuningParams);
122 if (paramsFile.eof()) break;
127 // for (UInt_t i=0; i<nrTuningParams; i++) {
128 // printf("Entry %d: N=%s , V=%s\n",i,((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
132 Int_t permstatus = 0;
134 TString idn = "spd_perm_noisy";
135 permstatus=daqDA_DB_getFile(idn.Data(),permNoisyFileName.Data());
137 printf("Failed to get config file %s: status=%d. No permanently noisy pixels will be added.\n",idn.Data(),permstatus);
144 // ********* STEP 1: Produce scan container files (Reference Data). ***********************************
148 int runNr = atoi(getenv("DATE_RUN_NUMBER"));
150 int runNr = atoi(argv[1]);
155 AliITSOnlineSPDscan *scanObj[20];
156 Bool_t bScanInit[20];
157 for (UInt_t eqId=0; eqId<20; eqId++) {
159 bScanInit[eqId]=kFALSE;
161 // header data variables
163 Bool_t halfStaveScanned[20][6];
165 Bool_t dataFormat[20];
167 Bool_t chipPresent[20][6][10];
176 UInt_t dacHigh[20][6];
177 UInt_t dacLow[20][6];
179 Bool_t minTHchipPresent[20][10];
180 // current scan step flag
181 Int_t currentStep[20];
182 for (UInt_t eqId=0; eqId<20; eqId++) currentStep[eqId] = 9999;
184 // loop over run segments
185 for (int segNr=startSeg; segNr<argc; segNr++) {
189 /* define data source : this is argument 1 */
190 status=monitorSetDataSource( argv[segNr] );
192 printf("monitorSetDataSource() failed : %s\n",monitorDecodeError(status));
195 /* declare monitoring program */
196 status=monitorDeclareMp("ITS_SPD_CAL");
198 printf("monitorDeclareMp() failed : %s\n",monitorDecodeError(status));
201 /* define wait event timeout - 1s max */
203 monitorSetNoWaitNetworkTimeout(1000);
208 /* main loop (infinite) */
211 struct eventHeaderStruct *event;
212 eventTypeType eventT;
214 /* check shutdown condition */
216 if (daqDA_checkShutdown()) {break;}
218 /* get next event (blocking call until timeout) */
219 status=monitorGetEventDynamic((void **)&event);
220 if (status==MON_ERR_EOF) {
221 printf ("End of File detected\n");
222 break; /* end of monitoring file has been reached */
225 printf("monitorGetEventDynamic() failed : %s\n",monitorDecodeError(status));
228 /* retry if got no event */
233 eventT=event->eventType;
234 if (eventT == PHYSICS_EVENT) {
237 // printf("eventNr %d\n",eventNr);
239 AliRawReader *reader = new AliRawReaderDate((void*)event);
240 AliITSRawStreamSPD *str = new AliITSRawStreamSPD(reader);
242 for (UInt_t eqId=0; eqId<20; eqId++) {
245 reader->Select("ITSSPD",eqId,eqId);
247 // Hit Event flags, specific for one event
248 Bool_t hitEventHSIncremented[6];
249 Bool_t hitEventChipIncremented[6][10];
250 for (UInt_t hs=0; hs<6; hs++) {
251 hitEventHSIncremented[hs] = kFALSE;
252 for (UInt_t chip=0; chip<10; chip++) {
253 hitEventChipIncremented[hs][chip] = kFALSE;
257 if (str->ReadCalibHeader()>0) {
258 // first check the type:
259 if (bScanInit[eqId] && type[eqId]!=str->GetHtype()) {
260 printf("Calib header problem. Type changed (%d -> %d)!\n",type[eqId],str->GetHtype());
264 routerNr[eqId] = str->GetHrouterNr();
265 type[eqId] = str->GetHtype();
266 dataFormat[eqId] = str->GetHdataFormat();
267 triggers[eqId] = str->GetHtriggers();
268 dacStart[eqId] = str->GetHdacStart();
269 dacEnd[eqId] = str->GetHdacEnd();
270 dacStep[eqId] = str->GetHdacStep();
271 dacId[eqId] = str->GetHdacId();
272 rowStart[eqId] = str->GetHrowStart();
273 rowEnd[eqId] = str->GetHrowEnd();
274 rowValue[eqId] = str->GetHrowValue();
275 dacValue[eqId] = str->GetHdacValue();
276 for (UInt_t hs=0; hs<6; hs++) {
277 halfStaveScanned[eqId][hs] = str->GetHhalfStaveScanned(hs);
278 dacHigh[eqId][hs] = str->GetHdacHigh(hs);
279 dacLow[eqId][hs] = str->GetHdacLow(hs);
280 TPAmp[eqId][hs] = str->GetHTPAmp(hs);
281 for (UInt_t chip=0; chip<10; chip++) {
282 chipPresent[eqId][hs][chip] = str->GetHchipPresent(hs,chip);
285 for (UInt_t chip=0; chip<10; chip++) {
286 minTHchipPresent[eqId][chip] = str->GetHminTHchipPresent(chip);
289 currentStep[eqId] = (dacValue[eqId]-dacStart[eqId])/dacStep[eqId];
290 if (type[eqId]==DELAY) {
291 currentStep[eqId]=currentStep[eqId]*2;
292 dacValue[eqId]=dacValue[eqId]*2;
293 if (dacHigh[eqId][0]==128) { // misc_ctrl value
294 currentStep[eqId]=currentStep[eqId]+1;
295 dacValue[eqId]=dacValue[eqId]+1;
300 if (routerNr[eqId]!=eqId) {
301 printf("Router nr problem? Router nr %d != EqID %d\n",routerNr[eqId],eqId);
304 if (!bScanInit[eqId]) {
305 // initialize container object
306 TString fileName = Form("%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
307 switch (type[eqId]) {
310 scanObj[eqId] = new AliITSOnlineSPDscanSingle(fileName.Data());
311 ((AliITSOnlineSPDscanSingle*)scanObj[eqId])->ClearThis();
312 bScanInit[eqId]=kTRUE;
317 scanObj[eqId] = new AliITSOnlineSPDscanMultiple(fileName.Data());
318 scanObj[eqId]->ClearThis();
319 bScanInit[eqId]=kTRUE;
322 scanObj[eqId] = new AliITSOnlineSPDscanMeanTh(fileName.Data());
323 scanObj[eqId]->ClearThis();
324 bScanInit[eqId]=kTRUE;
327 printf("Unknown scan type: %d.\n",type[eqId]);
329 // some multiple scan data
330 if (type[eqId]==MINTH || type[eqId]==MEANTH || type[eqId]==DAC || type[eqId]==DELAY) {
331 ((AliITSOnlineSPDscanMultiple*)scanObj[eqId])->SetDacId(dacId[eqId]);
334 scanObj[eqId]->SetRunNr((UInt_t)runNr);
335 scanObj[eqId]->SetRouterNr(routerNr[eqId]);
336 for (UInt_t hs=0; hs<6; hs++) {
337 scanObj[eqId]->SetHalfStaveScanned(hs,halfStaveScanned[eqId][hs]);
339 scanObj[eqId]->SetType(type[eqId]);
340 scanObj[eqId]->SetDataFormat(dataFormat[eqId]);
341 for (Int_t hs=0; hs<6; hs++) {
343 // remove later when the chip present is set correctly !!!!!!!!!!!!!!!!!!!!!!!!!!!
344 Bool_t halfStavePresent = str->GetHalfStavePresent(hs);
345 // remove later when the chip present is set correctly !!!!!!!!!!!!!!!!!!!!!!!!!!!
347 for (UInt_t chip=0; chip<10; chip++) {
348 scanObj[eqId]->SetChipPresent(hs,chip,chipPresent[eqId][hs][chip]);
350 // remove later when the chip present is set correctly !!!!!!!!!!!!!!!!!!!!!!!!!!!
351 if (halfStavePresent) scanObj[eqId]->SetChipPresent(hs,chip,kTRUE);
352 // remove later when the chip present is set correctly !!!!!!!!!!!!!!!!!!!!!!!!!!!
356 scanObj[eqId]->SetRowStart(rowStart[eqId]);
357 scanObj[eqId]->SetRowEnd(rowEnd[eqId]);
358 scanObj[eqId]->SetDacStart(dacStart[eqId]);
359 scanObj[eqId]->SetDacEnd(dacEnd[eqId]);
360 scanObj[eqId]->SetDacStep(dacStep[eqId]);
363 if (type[eqId]==MINTH) {
364 scanObj[eqId]->SetTriggers(currentStep[eqId],triggers[eqId]);
366 if (type[eqId]==UNIMA || type[eqId]==NOISE) {
367 if (currentStep[eqId]==9999) printf("SPDcalibratorStep1 (eq %d): single step\n",eqId);
370 if (type[eqId]==MINTH || type[eqId]==MEANTH || type[eqId]==DAC || type[eqId]==DELAY) {
371 ((AliITSOnlineSPDscanMultiple*)scanObj[eqId])->SetDacValue(currentStep[eqId],dacValue[eqId]);
372 if (type[eqId]==DELAY) {
373 printf("SPDcalibratorStep1 (eq %d): DAC %d/%d , step %d\n",eqId,dacValue[eqId]/2,dacHigh[eqId][0],currentStep[eqId]);
376 printf("SPDcalibratorStep1 (eq %d): DAC %d , step %d\n",eqId,dacValue[eqId],currentStep[eqId]);
379 if (type[eqId]==MEANTH) {
380 for (Int_t hs=0; hs<6; hs++) {
381 ((AliITSOnlineSPDscanMeanTh*)scanObj[eqId])->SetDacLow(currentStep[eqId],hs,dacLow[eqId][hs]);
382 ((AliITSOnlineSPDscanMeanTh*)scanObj[eqId])->SetDacHigh(currentStep[eqId],hs,dacHigh[eqId][hs]);
383 ((AliITSOnlineSPDscanMeanTh*)scanObj[eqId])->SetTPAmp(currentStep[eqId],hs,TPAmp[eqId][hs]);
390 if (bScanInit[eqId]) {
391 while (str->Next()) {
392 UInt_t hs = str->GetHalfStaveNr();
393 UInt_t chip = str->GetChipAddr();
394 //***remove last condition when minthpresent put correctly in calib header?
396 if (type[eqId]!=MINTH || minTHchipPresent[eqId][chip] || runNr<=416900) {
398 if (type[eqId]!=MINTH || minTHchipPresent[eqId][chip] || runNr<=416900) {
400 //*************************************************************************
401 scanObj[eqId]->IncrementHits(currentStep[eqId],hs,chip,str->GetChipCol(),str->GetChipRow());
403 if (!hitEventHSIncremented[hs]) {
404 scanObj[eqId]->IncrementHitEventsTot(currentStep[eqId],hs);
405 hitEventHSIncremented[hs]=kTRUE;
408 if (!hitEventChipIncremented[hs][chip]) {
409 scanObj[eqId]->IncrementHitEvents(currentStep[eqId],hs,chip);
410 hitEventChipIncremented[hs][chip]=kTRUE;
416 if (type[eqId]!=MINTH) { // for minth, triggers are set from header info
417 scanObj[eqId]->IncrementTriggers(currentStep[eqId]);
435 daqDA_progressReport((unsigned int)( ((Float_t)(segNr-startSeg+1))/(argc-startSeg)*50 ));
437 printf("progress: %d\n",(unsigned int)( ((Float_t)(segNr-startSeg+1))/(argc-startSeg)*50 ));
443 // clean up scan objects (which also saves them)
444 for (UInt_t eqId=0; eqId<20; eqId++) {
445 if (scanObj[eqId]!=NULL) delete scanObj[eqId];
452 // ********* STEP 2: Analyze scan container files. ************************************************
454 // clear noisyToFXS and DCSconfigToFXS dirs:
455 TString command = Form("cd %s; rm -f *",saveDirNoisyToFXS);
456 system(command.Data());
457 TString command2 = Form("cd %s; rm -f *",saveDirDCSconfigToFXS);
458 system(command2.Data());
459 UInt_t nrNoisyFilesProduced=0;
460 UInt_t nrDCSconfigFilesProduced=0;
462 AliITSOnlineCalibrationSPDhandler* handler = new AliITSOnlineCalibrationSPDhandler();
463 AliITSOnlineSPDscanAnalyzer *analyzer = NULL;
464 AliITSOnlineCalibrationSPDhandler* handlerPermNoisy = NULL;
465 // fill permanent noisy list to add later...
467 handlerPermNoisy = new AliITSOnlineCalibrationSPDhandler();
468 UInt_t permNoisy = handlerPermNoisy->ReadNoisyFromText(permNoisyFileName.Data(),240); // 240 = read for all modules
470 printf("%d noisy pixels read from permanent list.\n",permNoisy);
474 Bool_t reset_made = kFALSE;
476 // *** *** *** start loop over equipments (eq_id)
477 for (int eqId=0; eqId<20; eqId++) {
479 // create analyzer for this eq
480 TString fileName = Form("%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
481 analyzer = new AliITSOnlineSPDscanAnalyzer(fileName.Data(),handler);
483 // configure analyzer with tuning parameters etc:
484 for (UInt_t i=0; i<nrTuningParams; i++) {
485 analyzer->SetParam(((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
488 UInt_t type = analyzer->GetType();
489 UInt_t dacId = analyzer->GetDacId();
490 UInt_t routerNr = analyzer->GetRouterNr();
493 printf("SPD scan calibrator Step2: eqId %d, type %d, dacId %d\n",eqId,type,dacId);
495 else printf("SPD scan calibrator Step2: eqId %d type %d\n",eqId,type);
500 // algorithms for the different types of scans:
506 else if (type==NOISE) {
507 // read previous noisy list (clear if overwriting)
508 handler->SetFileLocation(saveDirNoisy);
509 if (analyzer->IsOverWriteSet() && !reset_made) {
510 handler->ResetNoisy();
511 handler->WriteToFilesAlways();
515 handler->ReadFromFiles();
517 if (analyzer->ProcessNoisyPixels(/*saveDirNoisy*/)) {
519 handler->AddNoisyFrom(handlerPermNoisy);
521 // init dcs config text file
522 TString dcsConfigFileName = Form("%s/dcsConfig_run_%d_eq_%d.txt",saveDirDCSconfigToFXS,runNr,eqId);
524 dcsfile.open(dcsConfigFileName.Data());
525 dcsfile << "[SPD SCAN]\n";
526 dcsfile << "RunNumber=" << runNr << "\n";
527 dcsfile << "Type=" << type << "\n";
528 dcsfile << "Router=" << routerNr << "\n";
529 dcsfile << "ActualDetConfiguration=" << "0,-1,-1\n"; // dummy values for now
530 dcsfile << "[NOISY]\n";
531 nrDCSconfigFilesProduced++;
533 for (UInt_t hs=0; hs<6; hs++) {
534 for (UInt_t chip=0; chip<10; chip++) {
535 if (analyzer->IsChipPresent(hs,chip) || analyzer->IsOverWriteSet()) {
536 dcsfile << "-" << eqId << "," << hs << "," << chip << "\n";
537 UInt_t nrNoisy = handler->GetNrNoisyC(eqId,hs,chip);
538 for (UInt_t ind=0; ind<nrNoisy; ind++) {
539 UInt_t col = handler->GetNoisyColAtC(eqId,hs,chip,ind);
540 UInt_t row = handler->GetNoisyRowAtC(eqId,hs,chip,ind);
541 dcsfile << col << "," << row << "\n";
546 handler->SetFileLocation(saveDirNoisy);
547 handler->WriteNoisyToFile(eqId);
548 handler->SetFileLocation(saveDirNoisyToFXS);
549 handler->WriteNoisyToFile(eqId);
550 nrNoisyFilesProduced++;
556 else if (type==MINTH || (type==DAC && dacId==39)) {
557 // init dcs config text file
558 TString dcsConfigFileName = Form("%s/dcsConfig_run_%d_eq_%d.txt",saveDirDCSconfigToFXS,runNr,eqId);
560 dcsfile.open(dcsConfigFileName.Data());
561 dcsfile << "[SPD SCAN]\n";
562 dcsfile << "RunNumber=" << runNr << "\n";
563 dcsfile << "Type=" << type << "\n";
564 dcsfile << "Router=" << routerNr << "\n";
565 dcsfile << "ActualDetConfiguration=" << "0,-1,-1\n"; // dummy values for now
566 dcsfile << "[DACvalues]\n";
567 nrDCSconfigFilesProduced++;
568 for (UInt_t hs=0; hs<6; hs++) {
569 for (UInt_t chipNr=0; chipNr<10; chipNr++) {
571 if (analyzer->GetOnlineScan()->GetChipPresent(hs,chipNr)) {
572 minTh = analyzer->GetMinTh(hs,chipNr);
574 dcsfile << "39," << eqId << "," << hs << "," << chipNr << "=" << minTh << "\n";
577 printf("MinTh failed for Eq %d , HS %d , Chip %d\n",eqId,hs,chipNr);
585 else if (type==DELAY) {
586 // init dcs config text file
587 TString dcsConfigFileName = Form("%s/dcsConfig_run_%d_eq_%d.txt",saveDirDCSconfigToFXS,runNr,eqId);
589 dcsfile.open(dcsConfigFileName.Data());
590 dcsfile << "[SPD SCAN]\n";
591 dcsfile << "RunNumber=" << runNr << "\n";
592 dcsfile << "Type=" << type << "\n";
593 dcsfile << "Router=" << routerNr << "\n";
594 dcsfile << "ActualDetCoonfiguration=" << "0,-1,-1\n"; // dummy values for now
595 dcsfile << "[DACvalues]\n";
596 nrDCSconfigFilesProduced++;
597 for (UInt_t hs=0; hs<6; hs++) {
598 for (UInt_t chipNr=0; chipNr<10; chipNr++) {
599 Int_t clockCycle = -1;
600 Int_t delayCtrl = -1;
602 if (analyzer->GetOnlineScan()->GetChipPresent(hs,chipNr)) {
603 clockCycle = analyzer->GetDelay(hs,chipNr);
604 delayCtrl = clockCycle/2;
606 if (clockCycle!=-1) {
607 if (clockCycle%2==1) miscCtrl = 128;
608 dcsfile << "42," << eqId << "," << hs << "," << chipNr << "=" << delayCtrl << "\n";
609 dcsfile << "43," << eqId << "," << hs << "," << chipNr << "=" << miscCtrl << "\n";
612 printf("Delay failed for Eq %d , HS %d , Chip %d\n",eqId,hs,chipNr);
623 daqDA_progressReport((unsigned int)(50+(eqId+1)*2.5));
625 printf("progress: %d\n",(unsigned int)(50+(eqId+1)*2.5));
629 // *** *** *** end loop over equipments (eq_id)
633 if (handlerPermNoisy!=NULL) {
634 delete handlerPermNoisy;
638 TString idsFXSFileName = Form("%s/FXSids_run_%d.txt",saveDirIdsToFXS,runNr);
640 idsFXSfile.open(idsFXSFileName.Data());
644 // send noisy data to FXS
645 if (nrNoisyFilesProduced>0) {
646 // send a tared file of all new noisy maps
647 TString command = Form("cd %s; tar -cf noisy_scan.tar *",saveDirNoisyToFXS);
648 // printf("\n\n%s\n\n",command.Data());
649 system(command.Data());
650 TString fileName = Form("%s/noisy_scan.tar",saveDirNoisyToFXS);
651 TString id = "SPD_scan_noisy";
653 Int_t status = daqDA_FES_storeFile(fileName.Data(),id.Data());
655 printf("Failed to export file %s , status %d\n",fileName.Data(),status);
659 idsFXSfile << Form("%s\n",id.Data());
662 // send dcs config files to FXS
663 if (nrDCSconfigFilesProduced>0) {
664 // send a tared file of all the dcsConfig text files
665 TString command = Form("cd %s; tar -cf dcsConfig.tar *",saveDirDCSconfigToFXS);
666 // printf("\n\n%s\n\n",command.Data());
667 system(command.Data());
668 TString fileName = Form("%s/dcsConfig.tar",saveDirDCSconfigToFXS);
669 TString id = "SPD_dcsConfig";
671 Int_t status = daqDA_FES_storeFile(fileName.Data(),id.Data());
673 printf("Failed to export file %s , status %d\n",fileName.Data(),status);
677 //idsFXSfile << Form("%s\n",id.Data()); // do NOT write this id (this is not for preprocessor)
680 // send reference data to FXS
681 for (UInt_t eqId=0; eqId<20; eqId++) {
682 if (bScanInit[eqId]) {
683 TString fileName = Form("%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
684 TString id = Form("SPD_ref_scan_%d",eqId);
686 Int_t status = daqDA_FES_storeFile(fileName.Data(),id.Data());
688 printf("Failed to export file %s , status %d\n",fileName.Data(),status);
692 idsFXSfile << Form("%s\n",id.Data());