2 Contact: henrik.tydesjo@cern.ch
3 Link: tydes.home.cern.ch/tydes/doc/CalibrationOverview/CalibrationAlgorithms/
4 Run Type: DAQ_MIN_TH_SCAN,DAQ_MEAN_TH_SCAN,DAQ_UNIFORMITY_SCAN,DAQ_NOISY_PIX_SCAN,DAQ_PIX_DELAY_SCAN
6 Number of events needed: Depending on scan type
7 Input Files: spd_standal_params,spd_perm_noisy , ./calibResults/ScanNoisy/* , raw data
8 Output Files: ./calibResults/ScanReference/* , ./calibResults/ScanDCSconfigToFXS/* , ./calibResults/ScanNoisyToFXS/* , ./calibResults/ScanNoisy/*
9 Trigger types used: PHYSICS
12 ////////////////////////////////////////////////////////////////////////////////
13 // This program can be compiled in two modes. //
15 // 1. With the DAQ DA framework on. This is the default operating mode. //
16 // Call this program with the name of the executable followed by the //
17 // data files to process. //
19 // 2. Without the DAQ DA framework on. Define the SPD_DA_OFF environment var. //
20 // Call this program with the name of the executable followed by the //
21 // runNr and the data files to process. //
23 ////////////////////////////////////////////////////////////////////////////////
32 #include "AliRawReaderDate.h"
33 #include "AliITSRawStreamSPD.h"
34 #include "AliITSOnlineSPDscan.h"
35 #include "AliITSOnlineSPDscanSingle.h"
36 #include "AliITSOnlineSPDscanMultiple.h"
37 #include "AliITSOnlineSPDscanMeanTh.h"
38 #include "AliITSOnlineSPDscanAnalyzer.h"
39 #include "AliITSOnlineCalibrationSPDhandler.h"
44 #include <TPluginManager.h>
45 #include <TObjArray.h>
46 #include <TObjString.h>
50 int main(int argc, char **argv) {
52 printf("Wrong number of arguments\n");
56 // directory structure, hard coded
57 char *saveDirNoisy = "./calibResults/ScanNoisy"; // may NOT delete content
58 char *saveDirNoisyToFXS = "./calibResults/ScanNoisyToFXS"; // may delete content
59 char *saveDirDCSconfigToFXS= "./calibResults/ScanDCSconfigToFXS"; // may delete content
60 char *saveDirRef = "./calibResults/ScanReference"; // may delete content
61 char *saveDirIdsToFXS = "./calibResults/IdsToFXS"; // may delete content
62 char *configFilesDir = "./configFiles"; // may delete content
64 // make sure the directory structure is correct:
65 system("mkdir ./calibResults >& /dev/null");
66 system("mkdir ./calibResults/ScanNoisy >& /dev/null");
67 system("mkdir ./calibResults/ScanNoisyToFXS >& /dev/null");
68 system("mkdir ./calibResults/ScanDCSconfigToFXS >& /dev/null");
69 system("mkdir ./calibResults/ScanReference >& /dev/null");
70 system("mkdir ./calibResults/IdsToFXS >& /dev/null");
71 system("mkdir ./configFiles >& /dev/null");
72 // prameters config files
73 TString paramsFileName = Form("%s/standal_params.txt",configFilesDir);
74 TString permNoisyFileName = Form("%s/perm_noisy.txt",configFilesDir);
76 TFitter *fitter = new TFitter(3);
77 TVirtualFitter::SetFitter(fitter);
79 // This line is needed in case of a stand-alone application w/o
80 // $ROOTSYS/etc/system.rootrc file
81 gROOT->GetPluginManager()->AddHandler("TVirtualStreamerInfo",
87 // turn off annoying warning messages
89 AliLog::Instance()->SetGlobalDebugLevel(-20);
92 enum calib_types{MINTH,MEANTH,DAC,UNIMA,NOISE,DELAY};
95 // ********* STEP 0: Get configuration files from db (if there are any) , then read parameters*********
96 UInt_t nrTuningParams = 0;
97 TObjArray paramNames; paramNames.SetOwner(kTRUE);
98 TObjArray paramVals; paramVals.SetOwner(kTRUE);
100 // tuning parameters:
103 TString idp = "spd_standal_params";
104 status=daqDA_DB_getFile(idp.Data(),paramsFileName.Data());
106 printf("Failed to get config file %s: status=%d. Using default tuning parameters.\n",idp.Data(),status);
107 TString rmCmd = Form("rm -f %s",paramsFileName.Data());
108 system(rmCmd.Data());
113 paramsFile.open(paramsFileName.Data(), ifstream::in);
114 if (paramsFile.fail()) {
115 printf("No config file (%s) present. Using default tuning parameters.\n",paramsFileName.Data());
121 paramsFile >> paramN;
122 if (paramsFile.eof()) break;
123 paramsFile >> paramV;
124 paramNames.AddAtAndExpand(new TObjString(paramN),nrTuningParams);
125 paramVals.AddAtAndExpand(new TObjString(paramV),nrTuningParams);
127 if (paramsFile.eof()) break;
132 // for (UInt_t i=0; i<nrTuningParams; i++) {
133 // // printf("Entry %d: N=%s , V=%s\n",i,((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
134 // printf("Entry %d: N=%s , V=%s\n",i,((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
138 Int_t permstatus = 0;
140 TString idn = "spd_perm_noisy";
141 permstatus=daqDA_DB_getFile(idn.Data(),permNoisyFileName.Data());
143 printf("Failed to get config file %s: status=%d. No permanently noisy pixels will be added.\n",idn.Data(),permstatus);
144 TString rmCmd = Form("rm -f %s",permNoisyFileName.Data());
145 system(rmCmd.Data());
152 // ********* STEP 1: Produce scan container files (Reference Data). ***********************************
156 if (getenv("DATE_RUN_NUMBER")==0) {
157 printf("DATE_RUN_NUMBER not properly set.\n");
160 int runNr = atoi(getenv("DATE_RUN_NUMBER"));
162 int runNr = atoi(argv[1]);
167 AliITSOnlineSPDscan *scanObj[20];
168 Bool_t bScanInit[20];
169 for (UInt_t eqId=0; eqId<20; eqId++) {
171 bScanInit[eqId]=kFALSE;
173 // header data variables
175 Bool_t halfStaveScanned[20][6];
177 Bool_t dataFormat[20];
179 Bool_t chipPresent[20][6][10];
188 UInt_t dacHigh[20][6];
189 UInt_t dacLow[20][6];
191 Bool_t minTHchipPresent[20][10];
192 // current scan step flag
193 Int_t currentStep[20];
194 for (UInt_t eqId=0; eqId<20; eqId++) currentStep[eqId] = 9999;
196 // loop over run segments
197 for (int segNr=startSeg; segNr<argc; segNr++) {
201 /* define data source : this is argument 1 */
202 status=monitorSetDataSource( argv[segNr] );
204 printf("monitorSetDataSource() failed : %s\n",monitorDecodeError(status));
207 /* declare monitoring program */
208 status=monitorDeclareMp("ITS_SPD_CAL");
210 printf("monitorDeclareMp() failed : %s\n",monitorDecodeError(status));
213 /* define wait event timeout - 1s max */
215 monitorSetNoWaitNetworkTimeout(1000);
220 /* main loop (infinite) */
223 struct eventHeaderStruct *event;
224 eventTypeType eventT;
226 /* check shutdown condition */
228 if (daqDA_checkShutdown()) {break;}
230 /* get next event (blocking call until timeout) */
231 status=monitorGetEventDynamic((void **)&event);
232 if (status==MON_ERR_EOF) {
233 printf ("End of File detected\n");
234 break; /* end of monitoring file has been reached */
237 printf("monitorGetEventDynamic() failed : %s\n",monitorDecodeError(status));
240 /* retry if got no event */
245 eventT=event->eventType;
246 if (eventT == PHYSICS_EVENT) {
249 // printf("eventNr %d\n",eventNr);
251 AliRawReader *reader = new AliRawReaderDate((void*)event);
252 AliITSRawStreamSPD *str = new AliITSRawStreamSPD(reader);
254 for (UInt_t eqId=0; eqId<20; eqId++) {
257 reader->Select("ITSSPD",eqId,eqId);
259 // Hit Event flags, specific for one event
260 Bool_t hitEventHSIncremented[6];
261 Bool_t hitEventChipIncremented[6][10];
262 for (UInt_t hs=0; hs<6; hs++) {
263 hitEventHSIncremented[hs] = kFALSE;
264 for (UInt_t chip=0; chip<10; chip++) {
265 hitEventChipIncremented[hs][chip] = kFALSE;
269 if (str->ReadCalibHeader()>0) {
270 // first check the type:
271 if (bScanInit[eqId] && type[eqId]!=str->GetHtype()) {
272 printf("Calib header problem. Type changed (%d -> %d)!\n",type[eqId],str->GetHtype());
276 routerNr[eqId] = str->GetHrouterNr();
277 type[eqId] = str->GetHtype();
278 dataFormat[eqId] = str->GetHdataFormat();
279 triggers[eqId] = str->GetHtriggers();
280 dacStart[eqId] = str->GetHdacStart();
281 dacEnd[eqId] = str->GetHdacEnd();
282 dacStep[eqId] = str->GetHdacStep();
283 dacId[eqId] = str->GetHdacId();
284 rowStart[eqId] = str->GetHrowStart();
285 rowEnd[eqId] = str->GetHrowEnd();
286 rowValue[eqId] = str->GetHrowValue();
287 dacValue[eqId] = str->GetHdacValue(); // this will change below for MEANTH scan
289 for (UInt_t hs=0; hs<6; hs++) {
290 halfStaveScanned[eqId][hs] = str->GetHhalfStaveScanned(hs);
291 dacHigh[eqId][hs] = str->GetHdacHigh(hs);
292 dacLow[eqId][hs] = str->GetHdacLow(hs);
293 TPAmp[eqId][hs] = str->GetHTPAmp(hs);
294 for (UInt_t chip=0; chip<10; chip++) {
295 chipPresent[eqId][hs][chip] = str->GetHchipPresent(hs,chip);
296 if (type[eqId]==MEANTH && chipPresent[eqId][hs][chip]) dacValue[eqId] = str->GetHdacLow(hs);
299 for (UInt_t chip=0; chip<10; chip++) {
300 minTHchipPresent[eqId][chip] = str->GetHminTHchipPresent(chip);
303 currentStep[eqId] = (dacValue[eqId]-dacStart[eqId])/dacStep[eqId];
304 if (type[eqId]==DELAY) {
305 currentStep[eqId]=currentStep[eqId]*2;
306 dacValue[eqId]=dacValue[eqId]*2;
307 if (dacHigh[eqId][0]==128) { // misc_ctrl value
308 currentStep[eqId]=currentStep[eqId]+1;
309 dacValue[eqId]=dacValue[eqId]+1;
314 if (routerNr[eqId]!=eqId) {
315 printf("Router nr problem? Router nr %d != EqID %d\n",routerNr[eqId],eqId);
318 if (!bScanInit[eqId]) {
319 // initialize container object
320 TString fileName = Form("%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
321 switch (type[eqId]) {
324 scanObj[eqId] = new AliITSOnlineSPDscanSingle(fileName.Data());
325 ((AliITSOnlineSPDscanSingle*)scanObj[eqId])->ClearThis();
326 bScanInit[eqId]=kTRUE;
331 scanObj[eqId] = new AliITSOnlineSPDscanMultiple(fileName.Data());
332 scanObj[eqId]->ClearThis();
333 bScanInit[eqId]=kTRUE;
336 scanObj[eqId] = new AliITSOnlineSPDscanMeanTh(fileName.Data());
337 scanObj[eqId]->ClearThis();
338 bScanInit[eqId]=kTRUE;
341 printf("Unknown scan type: %d.\n",type[eqId]);
343 // some multiple scan data
344 if (type[eqId]==MINTH || type[eqId]==MEANTH || type[eqId]==DAC || type[eqId]==DELAY) {
345 ((AliITSOnlineSPDscanMultiple*)scanObj[eqId])->SetDacId(dacId[eqId]);
348 scanObj[eqId]->SetRunNr((UInt_t)runNr);
349 scanObj[eqId]->SetRouterNr(routerNr[eqId]);
350 for (UInt_t hs=0; hs<6; hs++) {
351 scanObj[eqId]->SetHalfStaveScanned(hs,halfStaveScanned[eqId][hs]);
353 scanObj[eqId]->SetType(type[eqId]);
354 scanObj[eqId]->SetDataFormat(dataFormat[eqId]);
355 for (Int_t hs=0; hs<6; hs++) {
356 for (UInt_t chip=0; chip<10; chip++) {
357 scanObj[eqId]->SetChipPresent(hs,chip,chipPresent[eqId][hs][chip]);
360 scanObj[eqId]->SetRowStart(rowStart[eqId]);
361 scanObj[eqId]->SetRowEnd(rowEnd[eqId]);
362 scanObj[eqId]->SetDacStart(dacStart[eqId]);
363 scanObj[eqId]->SetDacEnd(dacEnd[eqId]);
364 scanObj[eqId]->SetDacStep(dacStep[eqId]);
367 if (type[eqId]==MINTH) {
368 scanObj[eqId]->SetTriggers(currentStep[eqId],triggers[eqId]);
370 if (type[eqId]==UNIMA || type[eqId]==NOISE) {
371 if (currentStep[eqId]==9999) printf("SPDcalibratorStep1 (eq %d): single step\n",eqId);
374 if (type[eqId]==MINTH || type[eqId]==MEANTH || type[eqId]==DAC || type[eqId]==DELAY) {
375 ((AliITSOnlineSPDscanMultiple*)scanObj[eqId])->SetDacValue(currentStep[eqId],dacValue[eqId]);
376 if (type[eqId]==DELAY) {
377 printf("SPDcalibratorStep1 (eq %d): DAC %d/%d , step %d\n",eqId,dacValue[eqId]/2,dacHigh[eqId][0],currentStep[eqId]);
380 printf("SPDcalibratorStep1 (eq %d): DAC %d , step %d\n",eqId,dacValue[eqId],currentStep[eqId]);
383 if (type[eqId]==MEANTH) {
384 for (Int_t hs=0; hs<6; hs++) {
385 ((AliITSOnlineSPDscanMeanTh*)scanObj[eqId])->SetDacLow(currentStep[eqId],hs,dacLow[eqId][hs]);
386 ((AliITSOnlineSPDscanMeanTh*)scanObj[eqId])->SetDacHigh(currentStep[eqId],hs,dacHigh[eqId][hs]);
387 ((AliITSOnlineSPDscanMeanTh*)scanObj[eqId])->SetTPAmp(currentStep[eqId],hs,TPAmp[eqId][hs]);
394 if (bScanInit[eqId]) {
395 while (str->Next()) {
396 UInt_t hs = str->GetHalfStaveNr();
397 UInt_t chip = str->GetChipAddr();
398 //***remove last condition when minthpresent put correctly in calib header?
400 if (type[eqId]!=MINTH || minTHchipPresent[eqId][chip] || runNr<=416900) {
402 if (type[eqId]!=MINTH || minTHchipPresent[eqId][chip] || runNr<=416900) {
404 //*************************************************************************
405 scanObj[eqId]->IncrementHits(currentStep[eqId],hs,chip,str->GetChipCol(),str->GetChipRow());
407 if (!hitEventHSIncremented[hs]) {
408 scanObj[eqId]->IncrementHitEventsTot(currentStep[eqId],hs);
409 hitEventHSIncremented[hs]=kTRUE;
412 if (!hitEventChipIncremented[hs][chip]) {
413 scanObj[eqId]->IncrementHitEvents(currentStep[eqId],hs,chip);
414 hitEventChipIncremented[hs][chip]=kTRUE;
420 if (type[eqId]!=MINTH) { // for minth, triggers are set from header info
421 scanObj[eqId]->IncrementTriggers(currentStep[eqId]);
439 daqDA_progressReport((unsigned int)( ((Float_t)(segNr-startSeg+1))/(argc-startSeg)*50 ));
441 printf("progress: %d\n",(unsigned int)( ((Float_t)(segNr-startSeg+1))/(argc-startSeg)*50 ));
447 // clean up scan objects (which also saves them) , check if something happened...
448 Bool_t somethingHappened = kFALSE;
449 for (UInt_t eqId=0; eqId<20; eqId++) {
450 if (scanObj[eqId]!=NULL) {
451 delete scanObj[eqId];
452 somethingHappened = kTRUE;
455 if (!somethingHappened) {
456 printf("WARNING: No data processed. Are the calibration headers missing?\n");
462 // ********* STEP 2: Analyze scan container files. ************************************************
464 // clear noisyToFXS and DCSconfigToFXS dirs:
465 TString command = Form("cd %s; rm -f *",saveDirNoisyToFXS);
466 system(command.Data());
467 TString command2 = Form("cd %s; rm -f *",saveDirDCSconfigToFXS);
468 system(command2.Data());
469 UInt_t nrNoisyFilesProduced=0;
470 UInt_t nrDCSconfigFilesProduced=0;
472 AliITSOnlineCalibrationSPDhandler* handler = new AliITSOnlineCalibrationSPDhandler();
473 AliITSOnlineSPDscanAnalyzer *analyzer = NULL;
474 AliITSOnlineCalibrationSPDhandler* handlerPermNoisy = NULL;
475 // fill permanent noisy list to add later...
477 handlerPermNoisy = new AliITSOnlineCalibrationSPDhandler();
478 UInt_t permNoisy = handlerPermNoisy->ReadNoisyFromText(permNoisyFileName.Data(),240); // 240 = read for all modules
480 printf("%d noisy pixels read from permanent list.\n",permNoisy);
484 Bool_t reset_made = kFALSE;
486 // *** *** *** start loop over equipments (eq_id)
487 for (int eqId=0; eqId<20; eqId++) {
489 // create analyzer for this eq
490 TString fileName = Form("%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
491 analyzer = new AliITSOnlineSPDscanAnalyzer(fileName.Data(),handler);
493 // configure analyzer with tuning parameters etc:
494 for (UInt_t i=0; i<nrTuningParams; i++) {
495 analyzer->SetParam(((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
498 UInt_t type = analyzer->GetType();
499 UInt_t dacId = analyzer->GetDacId();
500 UInt_t routerNr = analyzer->GetRouterNr();
503 printf("SPD scan calibrator Step2: eqId %d, type %d, dacId %d\n",eqId,type,dacId);
505 else printf("SPD scan calibrator Step2: eqId %d type %d\n",eqId,type);
510 // algorithms for the different types of scans:
516 else if (type==NOISE) {
517 // read previous noisy list (clear if overwriting)
518 handler->SetFileLocation(saveDirNoisy);
519 if (analyzer->IsOverWriteSet() && !reset_made) {
520 handler->ResetNoisy();
521 handler->WriteToFilesAlways();
525 handler->ReadFromFiles();
527 if (analyzer->ProcessNoisyPixels(/*saveDirNoisy*/)) {
529 handler->AddNoisyFrom(handlerPermNoisy);
531 // init dcs config text file
532 TString dcsConfigFileName = Form("%s/dcsConfig_run_%d_eq_%d.txt",saveDirDCSconfigToFXS,runNr,eqId);
534 dcsfile.open(dcsConfigFileName.Data());
535 dcsfile << "[SPD SCAN]\n";
536 dcsfile << "RunNumber=" << runNr << "\n";
537 dcsfile << "Type=" << type << "\n";
538 dcsfile << "Router=" << routerNr << "\n";
539 dcsfile << "ActualDetConfiguration=" << "0,-1,-1\n"; // dummy values for now
540 dcsfile << "[NOISY]\n";
541 nrDCSconfigFilesProduced++;
543 for (UInt_t hs=0; hs<6; hs++) {
544 for (UInt_t chip=0; chip<10; chip++) {
545 if (analyzer->IsChipPresent(hs,chip) || analyzer->IsOverWriteSet()) {
546 dcsfile << "-" << eqId << "," << hs << "," << chip << "\n";
547 UInt_t nrNoisy = handler->GetNrNoisyC(eqId,hs,chip);
548 for (UInt_t ind=0; ind<nrNoisy; ind++) {
549 UInt_t col = handler->GetNoisyColAtC(eqId,hs,chip,ind);
550 UInt_t row = handler->GetNoisyRowAtC(eqId,hs,chip,ind);
551 dcsfile << col << "," << row << "\n";
556 handler->SetFileLocation(saveDirNoisy);
557 handler->WriteNoisyToFile(eqId);
558 handler->SetFileLocation(saveDirNoisyToFXS);
559 handler->WriteNoisyToFile(eqId);
560 nrNoisyFilesProduced++;
566 else if (type==MINTH || (type==DAC && dacId==39)) {
567 // init dcs config text file
568 TString dcsConfigFileName = Form("%s/dcsConfig_run_%d_eq_%d.txt",saveDirDCSconfigToFXS,runNr,eqId);
570 dcsfile.open(dcsConfigFileName.Data());
571 dcsfile << "[SPD SCAN]\n";
572 dcsfile << "RunNumber=" << runNr << "\n";
573 dcsfile << "Type=" << type << "\n";
574 dcsfile << "Router=" << routerNr << "\n";
575 dcsfile << "ActualDetConfiguration=" << "0,-1,-1\n"; // dummy values for now
576 dcsfile << "[DACvalues]\n";
577 nrDCSconfigFilesProduced++;
578 for (UInt_t hs=0; hs<6; hs++) {
579 for (UInt_t chipNr=0; chipNr<10; chipNr++) {
581 if (analyzer->GetOnlineScan()->GetChipPresent(hs,chipNr)) {
582 minTh = analyzer->GetMinTh(hs,chipNr);
584 dcsfile << "39," << eqId << "," << hs << "," << chipNr << "=" << minTh << "\n";
587 printf("MinTh failed for Eq %d , HS %d , Chip %d\n",eqId,hs,chipNr);
595 else if (type==DELAY) {
596 // init dcs config text file
597 TString dcsConfigFileName = Form("%s/dcsConfig_run_%d_eq_%d.txt",saveDirDCSconfigToFXS,runNr,eqId);
599 dcsfile.open(dcsConfigFileName.Data());
600 dcsfile << "[SPD SCAN]\n";
601 dcsfile << "RunNumber=" << runNr << "\n";
602 dcsfile << "Type=" << type << "\n";
603 dcsfile << "Router=" << routerNr << "\n";
604 dcsfile << "ActualDetCoonfiguration=" << "0,-1,-1\n"; // dummy values for now
605 dcsfile << "[DACvalues]\n";
606 nrDCSconfigFilesProduced++;
607 for (UInt_t hs=0; hs<6; hs++) {
608 for (UInt_t chipNr=0; chipNr<10; chipNr++) {
609 Int_t clockCycle = -1;
610 Int_t delayCtrl = -1;
612 if (analyzer->GetOnlineScan()->GetChipPresent(hs,chipNr)) {
613 clockCycle = analyzer->GetDelay(hs,chipNr);
614 delayCtrl = clockCycle/2;
616 if (clockCycle!=-1) {
617 if (clockCycle%2==1) miscCtrl = 128;
618 dcsfile << "42," << eqId << "," << hs << "," << chipNr << "=" << delayCtrl << "\n";
619 dcsfile << "43," << eqId << "," << hs << "," << chipNr << "=" << miscCtrl << "\n";
622 printf("Delay failed for Eq %d , HS %d , Chip %d\n",eqId,hs,chipNr);
633 daqDA_progressReport((unsigned int)(50+(eqId+1)*2.5));
635 printf("progress: %d\n",(unsigned int)(50+(eqId+1)*2.5));
639 // *** *** *** end loop over equipments (eq_id)
643 if (handlerPermNoisy!=NULL) {
644 delete handlerPermNoisy;
647 printf("Opening id list file\n");
648 TString idsFXSFileName = Form("%s/FXSids_run_%d.txt",saveDirIdsToFXS,runNr);
650 idsFXSfile.open(idsFXSFileName.Data());
654 // send noisy data to FXS
655 if (nrNoisyFilesProduced>0) {
656 printf("Preparing noisy files\n");
657 // send a tared file of all new noisy maps
658 TString command = Form("cd %s; tar -cf noisy_scan.tar *",saveDirNoisyToFXS);
659 // printf("\n\n%s\n\n",command.Data());
660 system(command.Data());
661 TString fileName = Form("%s/noisy_scan.tar",saveDirNoisyToFXS);
662 TString id = "SPD_scan_noisy";
664 Int_t status = daqDA_FES_storeFile(fileName.Data(),id.Data());
666 printf("Failed to export file %s , status %d\n",fileName.Data(),status);
670 idsFXSfile << Form("%s\n",id.Data());
673 // send dcs config files to FXS
674 if (nrDCSconfigFilesProduced>0) {
675 printf("Preparing DCS config files\n");
676 // send a tared file of all the dcsConfig text files
677 TString command = Form("cd %s; tar -cf dcsConfig.tar *",saveDirDCSconfigToFXS);
678 // printf("\n\n%s\n\n",command.Data());
679 system(command.Data());
680 TString fileName = Form("%s/dcsConfig.tar",saveDirDCSconfigToFXS);
681 TString id = "SPD_dcsConfig";
683 Int_t status = daqDA_FES_storeFile(fileName.Data(),id.Data());
685 printf("Failed to export file %s , status %d\n",fileName.Data(),status);
689 //idsFXSfile << Form("%s\n",id.Data()); // do NOT write this id (this is not for preprocessor)
692 // send reference data to FXS
693 for (UInt_t eqId=0; eqId<20; eqId++) {
694 if (bScanInit[eqId]) {
695 printf("Preparing reference data for eq %d\n",eqId);
696 TString fileName = Form("%s/SPDcal_run_%d_eq_%d.root",saveDirRef,runNr,eqId);
697 TString id = Form("SPD_ref_scan_%d",eqId);
699 Int_t status = daqDA_FES_storeFile(fileName.Data(),id.Data());
701 printf("Failed to export file %s , status %d\n",fileName.Data(),status);
705 idsFXSfile << Form("%s\n",id.Data());
710 printf("Preparing id list file\n");
712 TString id = "SPD_id_list";
714 status = daqDA_FES_storeFile(idsFXSFileName.Data(),id.Data());
716 printf("Failed to export file %s , status %d\n",idsFXSFileName.Data(),status);
722 printf("DA finished.\n");