1 #ifndef ALIMUONRECOPARAM_H
2 #define ALIMUONRECOPARAM_H
3 /* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * See cxx source for full Copyright notice */
9 /// \class AliMUONRecoParam
10 /// \brief Class with MUON reconstruction parameters
12 // Author: Philippe Pillot
14 #include "AliDetectorRecoParam.h"
18 class AliMUONRecoParam : public AliDetectorRecoParam
22 virtual ~AliMUONRecoParam();
24 static AliMUONRecoParam *GetLowFluxParam();
25 static AliMUONRecoParam *GetHighFluxParam();
26 static AliMUONRecoParam *GetCosmicParam();
27 static AliMUONRecoParam *GetCalibrationParam();
29 /// set the calibration mode (see GetCalibrationMode() for possible modes)
30 void SetCalibrationMode(Option_t* mode) { fCalibrationMode = mode; fCalibrationMode.ToUpper();}
32 Option_t* GetCalibrationMode() const;
34 /// set the clustering (pre-clustering) mode
35 void SetClusteringMode(Option_t* mode) {fClusteringMode = mode; fClusteringMode.ToUpper();}
36 /// get the clustering (pre-clustering) mode
37 Option_t* GetClusteringMode() const {return fClusteringMode.Data();}
39 /// Get the (truncated) average of sigmas of pedestal measurements, i.e. noise, of pads
40 Double_t AverageNoisePadCharge() const { return fAverageNoisePadCharge; }
41 /// Set the average of sigmas of pedestal measurements, i.e. noise, of pads
42 void AverageNoisePadCharge(Double_t noise) { fAverageNoisePadCharge = noise; }
44 /// Get the lowest charge we allow for pads
45 Double_t LowestPadCharge() const { return fChargeSigmaCut*fAverageNoisePadCharge; }
47 /// Get the cut applied to cut on cluster charge (the charge is cut if below fClusterChargeCut*LowestPadCharge())
48 Double_t ClusterChargeCut() const { return fClusterChargeCut; }
49 /// Set the cut applied to cut on cluster charge (the charge is cut if below fClusterChargeCut*LowestPadCharge())
50 void ClusterChargeCut(Double_t n) { fClusterChargeCut=n; }
52 /// Get the lowest possible cluster charge
53 Double_t LowestClusterCharge() const { return ClusterChargeCut()*LowestPadCharge(); }
55 /// set the tracking mode
56 void SetTrackingMode(Option_t* mode) {fTrackingMode = mode; fTrackingMode.ToUpper();}
57 /// get the tracking mode
58 Option_t* GetTrackingMode() const {return fTrackingMode.Data();}
60 /// switch on/off the combined cluster/track reconstruction
61 void CombineClusterTrackReco(Bool_t flag) {fCombinedClusterTrackReco = flag;}
62 /// return kTRUE/kFALSE if the combined cluster/track reconstruction is on/off
63 Bool_t CombineClusterTrackReco() const {return fCombinedClusterTrackReco;}
65 /// save all cluster info (including pads) in ESD, for the given percentage of events
66 void SaveFullClusterInESD(Bool_t flag, Double_t percentOfEvent = 100.) {fSaveFullClusterInESD = flag;
67 fPercentOfFullClusterInESD = (fSaveFullClusterInESD) ? percentOfEvent : 0.;}
68 /// return kTRUE/kFALSE depending on whether we save all cluster info in ESD or not
69 Bool_t SaveFullClusterInESD() const {return fSaveFullClusterInESD;}
70 /// return the percentage of events for which all cluster info are stored in ESD
71 Double_t GetPercentOfFullClusterInESD() const {return fPercentOfFullClusterInESD;}
73 /// set the minimum value (GeV/c) of momentum in bending plane
74 void SetMinBendingMomentum(Double_t val) {fMinBendingMomentum = val;}
75 /// return the minimum value (GeV/c) of momentum in bending plane
76 Double_t GetMinBendingMomentum() const {return fMinBendingMomentum;}
77 /// set the maximum value (GeV/c) of momentum in bending plane
78 void SetMaxBendingMomentum(Double_t val) {fMaxBendingMomentum = val;}
79 /// return the maximum value (GeV/c) of momentum in bending plane
80 Double_t GetMaxBendingMomentum() const {return fMaxBendingMomentum;}
82 /// set the maximum value of the non bending slope
83 void SetMaxNonBendingSlope(Double_t val) {fMaxNonBendingSlope = val;}
84 /// return the maximum value of the non bending slope
85 Double_t GetMaxNonBendingSlope() const {return fMaxNonBendingSlope;}
86 /// set the maximum value of the bending slope
87 void SetMaxBendingSlope(Double_t val) {fMaxBendingSlope = val;}
88 /// return the maximum value of the bending slope
89 Double_t GetMaxBendingSlope() const {return fMaxBendingSlope;}
91 /// switch on/off the track selection according to their slope (instead of their impact parameter)
92 void SelectOnTrackSlope(Bool_t flag) {fSelectTrackOnSlope = flag;}
93 /// return kTRUE/kFALSE if tracks are selected according to their slope/impact parameter
94 Bool_t SelectOnTrackSlope() const {return fSelectTrackOnSlope;}
96 /// set the vertex dispersion (cm) in non bending plane
97 void SetNonBendingVertexDispersion(Double_t val) {fNonBendingVertexDispersion = val;}
98 /// return the vertex dispersion (cm) in non bending plane
99 Double_t GetNonBendingVertexDispersion() const {return fNonBendingVertexDispersion;}
100 /// set the vertex dispersion (cm) in bending plane
101 void SetBendingVertexDispersion(Double_t val) {fBendingVertexDispersion = val;}
102 /// return the vertex dispersion (cm) in bending plane
103 Double_t GetBendingVertexDispersion() const {return fBendingVertexDispersion;}
105 /// set the maximum distance to the track to search for compatible cluster(s) in non bending direction
106 void SetMaxNonBendingDistanceToTrack(Double_t val) {fMaxNonBendingDistanceToTrack = val;}
107 /// return the maximum distance to the track to search for compatible cluster(s) in non bending direction
108 Double_t GetMaxNonBendingDistanceToTrack() const {return fMaxNonBendingDistanceToTrack;}
109 /// set the maximum distance to the track to search for compatible cluster(s) in bending direction
110 void SetMaxBendingDistanceToTrack(Double_t val) {fMaxBendingDistanceToTrack = val;}
111 /// return the maximum distance to the track to search for compatible cluster(s) in bending direction
112 Double_t GetMaxBendingDistanceToTrack() const {return fMaxBendingDistanceToTrack;}
114 /// set the cut in sigma to apply on cluster (local chi2) and track (global chi2) during tracking
115 void SetSigmaCutForTracking(Double_t val) {fSigmaCutForTracking = val;}
116 /// return the cut in sigma to apply on cluster (local chi2) and track (global chi2) during tracking
117 Double_t GetSigmaCutForTracking() const {return fSigmaCutForTracking;}
119 /// switch on/off the track improvement and keep the default cut in sigma to apply on cluster (local chi2)
120 void ImproveTracks(Bool_t flag) {fImproveTracks = flag;}
121 /// switch on/off the track improvement and set the cut in sigma to apply on cluster (local chi2)
122 void ImproveTracks(Bool_t flag, Double_t sigmaCut) {fImproveTracks = flag; fSigmaCutForImprovement = sigmaCut;}
123 /// return kTRUE/kFALSE if the track improvement is switch on/off
124 Bool_t ImproveTracks() const {return fImproveTracks;}
125 /// return the cut in sigma to apply on cluster (local chi2) during track improvement
126 Double_t GetSigmaCutForImprovement() const {return fSigmaCutForImprovement;}
128 /// set the cut in sigma to apply on track during trigger hit pattern search
129 void SetSigmaCutForTrigger(Double_t val) {fSigmaCutForTrigger = val; fMaxNormChi2MatchTrigger = val*val;}
130 /// return the cut in sigma to apply on track during trigger hit pattern search
131 Double_t GetSigmaCutForTrigger() const {return fSigmaCutForTrigger;}
132 /// set the cut in strips to apply on trigger track during trigger chamber efficiency
133 void SetStripCutForTrigger(Double_t val) {fStripCutForTrigger = val;}
134 /// return the cut in strips to apply on trigger track during trigger chamber efficiency
135 Double_t GetStripCutForTrigger() const {return fStripCutForTrigger;}
136 /// set the maximum search area in strips to apply on trigger track during trigger chamber efficiency
137 void SetMaxStripAreaForTrigger(Double_t val) {fMaxStripAreaForTrigger = val;}
138 /// return the maximum search area in strips to apply on trigger track during trigger chamber efficiency
139 Double_t GetMaxStripAreaForTrigger() const {return fMaxStripAreaForTrigger;}
141 /// return the maximum normalized chi2 of tracking/trigger track matching
142 Double_t GetMaxNormChi2MatchTrigger() const {return fMaxNormChi2MatchTrigger;}
144 /// switch on/off the tracking of all the possible candidates (track only the best one if switched off)
145 void TrackAllTracks(Bool_t flag) {fTrackAllTracks = flag;}
146 /// return kTRUE/kFALSE if the tracking of all the possible candidates is switched on/off
147 Bool_t TrackAllTracks() const {return fTrackAllTracks;}
149 /// switch on/off the recovering of tracks being lost during reconstruction
150 void RecoverTracks(Bool_t flag) {fRecoverTracks = flag;}
151 /// return kTRUE/kFALSE if the recovering of tracks being lost during reconstruction is switched on/off
152 Bool_t RecoverTracks() const {return fRecoverTracks;}
154 /// switch on/off the fast building of track candidates (assuming linear propagation between stations 4 and 5)
155 void MakeTrackCandidatesFast(Bool_t flag) {fMakeTrackCandidatesFast = flag;}
156 /// return kTRUE/kFALSE if the fast building of track candidates is switched on/off
157 Bool_t MakeTrackCandidatesFast() const {return fMakeTrackCandidatesFast;}
159 /// switch on/off the building of track candidates starting from 1 cluster in each of the stations 4 and 5
160 void MakeMoreTrackCandidates(Bool_t flag) {fMakeMoreTrackCandidates = flag;}
161 /// return kTRUE/kFALSE if the building of extra track candidates is switched on/off
162 Bool_t MakeMoreTrackCandidates() const {return fMakeMoreTrackCandidates;}
164 /// switch on/off the completion of reconstructed track
165 void ComplementTracks(Bool_t flag) {fComplementTracks = flag;}
166 /// return kTRUE/kFALSE if completion of the reconstructed track is switched on/off
167 Bool_t ComplementTracks() const {return fComplementTracks;}
169 /// remove tracks sharing cluster in stations 1 or 2
170 void RemoveConnectedTracksInSt12(Bool_t flag) {fRemoveConnectedTracksInSt12 = flag;}
171 /// return kTRUE/kFALSE whether tracks sharing cluster in station 1 and 2 must be removed or not
172 Bool_t RemoveConnectedTracksInSt12() const {return fRemoveConnectedTracksInSt12;}
174 /// switch on/off the use of the smoother
175 void UseSmoother(Bool_t flag) {fUseSmoother = flag;}
176 /// return kTRUE/kFALSE if the use of the smoother is switched on/off
177 Bool_t UseSmoother() const {return fUseSmoother;}
179 /// switch on/off a chamber in the reconstruction
180 void UseChamber(Int_t iCh, Bool_t flag) {if (iCh >= 0 && iCh < 10) fUseChamber[iCh] = flag;}
181 /// return kTRUE/kFALSE whether the chamber must be used or not
182 Bool_t UseChamber(Int_t iCh) const {return (iCh >= 0 && iCh < 10) ? fUseChamber[iCh] : kFALSE;}
184 /// request or not at least one cluster in the station to validate the track
185 void RequestStation(Int_t iSt, Bool_t flag) {if (iSt >= 0 && iSt < 5) fRequestStation[iSt] = flag;}
186 /// return kTRUE/kFALSE whether at least one cluster is requested in the station to validate the track
187 Bool_t RequestStation(Int_t iSt) const {return (iSt >= 0 && iSt < 5) ? fRequestStation[iSt] : kFALSE;}
188 /// return an integer where first 5 bits are set to 1 if the corresponding station is requested
189 UInt_t RequestedStationMask() const;
191 /// set the bypassSt45 value
192 void BypassSt45(Bool_t st4, Bool_t st5);
194 /// return kTRUE if we should replace clusters in St 4 and 5 by generated clusters from trigger tracks
195 Bool_t BypassSt45() const { return fBypassSt45==45; }
197 /// return kTRUE if we should replace clusters in St 4 by generated clusters from trigger tracks
198 Bool_t BypassSt4() const { return BypassSt45() || fBypassSt45==4 ; }
200 /// return kTRUE if we should replace clusters in St 5 by generated clusters from trigger tracks
201 Bool_t BypassSt5() const { return BypassSt45() || fBypassSt45==5 ; }
203 /// Set HV threshold for chambers (chamberId=0..9, use -1 to set all chambers equal)
204 void SetHVLimit(Int_t chamberId, Double_t ichamber);
205 /// Retrieve HV limit for chamber (chamberId=0..9)
206 Double_t HVLimit(Int_t chamberId) const;
208 /// Set Low and High threshold for pedestal mean
209 void SetPedMeanLimits(float low, float high) { fPedMeanLimits[0]=low; fPedMeanLimits[1]=high; }
210 /// Retrieve low limit of ped mean
211 Float_t PedMeanLowLimit() const { return fPedMeanLimits[0]; }
212 /// Retrieve high limit of ped mean
213 Float_t PedMeanHighLimit() const { return fPedMeanLimits[1]; }
215 /// Set Low and High threshold for pedestal sigma
216 void SetPedSigmaLimits(float low, float high) { fPedSigmaLimits[0]=low; fPedSigmaLimits[1]=high; }
217 /// Retrieve low limit of ped sigma
218 Float_t PedSigmaLowLimit() const { return fPedSigmaLimits[0]; }
219 /// Retrieve high limit of ped sigma
220 Float_t PedSigmaHighLimit() const { return fPedSigmaLimits[1]; }
222 /// Set Low and High threshold for gain a0 term
223 void SetGainA1Limits(float low, float high) { fGainA1Limits[0]=low; fGainA1Limits[1]=high; }
224 /// Retrieve low limit of a1 (linear term) gain parameter
225 Float_t GainA1LowLimit() const { return fGainA1Limits[0]; }
226 /// Retrieve high limit of a1 (linear term) gain parameter
227 Float_t GainA1HighLimit() const { return fGainA1Limits[1]; }
229 /// Set Low and High threshold for gain a1 term
230 void SetGainA2Limits(float low, float high) { fGainA2Limits[0]=low; fGainA2Limits[1]=high; }
231 /// Retrieve low limit of a2 (quadratic term) gain parameter
232 Float_t GainA2LowLimit() const { return fGainA2Limits[0]; }
233 /// Retrieve high limit of a2 (quadratic term) gain parameter
234 Float_t GainA2HighLimit() const { return fGainA2Limits[1]; }
236 /// Set Low and High threshold for gain threshold term
237 void SetGainThresLimits(float low, float high) { fGainThresLimits[0]=low; fGainThresLimits[1]=high; }
238 /// Retrieve low limit on threshold gain parameter
239 Float_t GainThresLowLimit() const { return fGainThresLimits[0]; }
240 /// Retrieve high limit on threshold gain parameter
241 Float_t GainThresHighLimit() const { return fGainThresLimits[1]; }
243 /// Set the goodness mask (see AliMUONPadStatusMapMaker)
244 void SetPadGoodnessMask(UInt_t mask) { fPadGoodnessMask=mask; }
245 /// Get the goodness mask
246 UInt_t PadGoodnessMask() const { return fPadGoodnessMask; }
248 /// Number of sigma cut we must apply when cutting on adc-ped
249 Double_t ChargeSigmaCut() const { return fChargeSigmaCut; }
251 /// Number of sigma cut we must apply when cutting on adc-ped
252 void ChargeSigmaCut(Double_t value) { fChargeSigmaCut=value; }
254 /// Set the default non bending resolution of chamber iCh
255 void SetDefaultNonBendingReso(Int_t iCh, Double_t val) {if (iCh >= 0 && iCh < 10) fDefaultNonBendingReso[iCh] = val;}
256 /// Get the default non bending resolution of chamber iCh
257 Double_t GetDefaultNonBendingReso(Int_t iCh) const {return (iCh >= 0 && iCh < 10) ? fDefaultNonBendingReso[iCh] : FLT_MAX;}
258 /// Set the default bending resolution of chamber iCh
259 void SetDefaultBendingReso(Int_t iCh, Double_t val) {if (iCh >= 0 && iCh < 10) fDefaultBendingReso[iCh] = val;}
260 /// Get the default bending resolution of chamber iCh
261 Double_t GetDefaultBendingReso(Int_t iCh) const {return (iCh >= 0 && iCh < 10) ? fDefaultBendingReso[iCh] : FLT_MAX;}
263 /// Set the maximum number of trigger tracks above which the tracking is cancelled
264 void SetMaxTriggerTracks(Int_t maxTriggerTracks) {fMaxTriggerTracks = maxTriggerTracks;}
265 /// Get the maximum number of trigger tracks above which the tracking is cancelled
266 Int_t GetMaxTriggerTracks() const {return fMaxTriggerTracks;}
268 /// Set the maximum number of track candidates above which the tracking abort
269 void SetMaxTrackCandidates(Int_t maxTrackCandidates) {fMaxTrackCandidates = maxTrackCandidates;}
270 /// Get the maximum number of track candidates above which the tracking abort
271 Int_t GetMaxTrackCandidates() const {return fMaxTrackCandidates;}
273 /// Set the limits for the acceptable manu occupancy
274 void SetManuOccupancyLimits(float low, float high) { fManuOccupancyLimits[0]=low; fManuOccupancyLimits[1]=high; }
275 /// Retrieve low value of manu occupancy limit
276 Float_t ManuOccupancyLowLimit() const { return fManuOccupancyLimits[0]; }
277 /// Retrieve high value of manu occupancy limit
278 Float_t ManuOccupancyHighLimit() const { return fManuOccupancyLimits[1]; }
280 /// Set the limits for the acceptable bp occupancy
281 void SetBuspatchOccupancyLimits(float low, float high) { fBuspatchOccupancyLimits[0]=low; fBuspatchOccupancyLimits[1]=high; }
282 /// Retrieve low value of bp occupancy limit
283 Float_t BuspatchOccupancyLowLimit() const { return fBuspatchOccupancyLimits[0]; }
284 /// Retrieve high value of bp occupancy limit
285 Float_t BuspatchOccupancyHighLimit() const { return fBuspatchOccupancyLimits[1]; }
287 /// Set the limits for the acceptable DE occupancy
288 void SetDEOccupancyLimits(float low, float high) { fDEOccupancyLimits[0]=low; fDEOccupancyLimits[1]=high; }
289 /// Retrieve low value of DE occupancy limit
290 Float_t DEOccupancyLowLimit() const { return fDEOccupancyLimits[0]; }
291 /// Retrieve high value of DE occupancy limit
292 Float_t DEOccupancyHighLimit() const { return fDEOccupancyLimits[1]; }
294 /// Set the fraction of buspatches outside the occupancy limits
295 void SetFractionOfBuspatchOutsideOccupancyLimit(float v) { fFractionOfBuspatchOutsideOccupancyLimit = v; }
296 /// Get the fraction of buspatches outside the occupancy limits
297 Float_t FractionOfBuspatchOutsideOccupancyLimit() const { return fFractionOfBuspatchOutsideOccupancyLimit; }
299 virtual void Print(Option_t *option = "") const;
301 /// Get the max event size (soft limit)
302 virtual Double_t EventSizeSoftLimit() const { return fEventSizeSoftLimit; }
304 /// Get the max event size (hard limit)
305 virtual Double_t EventSizeHardLimit() const { return fEventSizeHardLimit; }
307 /// Set the max event size limits
308 virtual void SetEventSizeLimits(Double_t soft, Double_t hard) { fEventSizeSoftLimit=soft; fEventSizeHardLimit=hard; }
310 /// Get the percentage of token lost error we allow
311 virtual Double_t TokenLostLimit() const { return fTokenLostLimit; }
313 /// Set the percentage of token lost error we allow
314 virtual void SetTokenLostLimit(Double_t limit) { fTokenLostLimit = limit; }
316 /// Whether or not we try to recover corrupted raw data
317 virtual Bool_t TryRecover() const { return fTryRecover; }
319 /// Set the try recover corrupted raw data (use kTRUE only if you know what you are doing. Should be left to kFALSE by default)
320 virtual void TryRecover(Bool_t flag) { fTryRecover = flag; }
322 /// Create object ready to be put in OCDB
323 static TObjArray* Create(const char* settings);
325 /// Show what is the OCDB for that run
326 static void Show(Int_t runNumber, const char* ocdbPath="raw://");
330 void SetDefaultLimits();
334 /// clustering mode: NOCLUSTERING, PRECLUSTER, PRECLUSTERV2, PRECLUSTERV3, COG, <pre>
335 /// SIMPLEFIT, SIMPLEFITV3, MLEM:DRAW, MLEM, MLEMV2, MLEMV3 </pre>
336 TString fClusteringMode; ///< \brief name of the clustering (+ pre-clustering) mode
338 /// tracking mode: ORIGINAL, KALMAN
339 TString fTrackingMode; ///< \brief name of the tracking mode
341 Double32_t fMinBendingMomentum; ///< minimum value (GeV/c) of momentum in bending plane
342 Double32_t fMaxBendingMomentum; ///< maximum value (GeV/c) of momentum in bending plane
343 Double32_t fMaxNonBendingSlope; ///< maximum value of the non bending slope
344 Double32_t fMaxBendingSlope; ///< maximum value of the bending slope (used only if B = 0)
346 Double32_t fNonBendingVertexDispersion; ///< vertex dispersion (cm) in non bending plane (used for original tracking only)
347 Double32_t fBendingVertexDispersion; ///< vertex dispersion (cm) in bending plane (used for original tracking only)
349 Double32_t fMaxNonBendingDistanceToTrack; ///< maximum distance to the track to search for compatible cluster(s) in non bending direction
350 Double32_t fMaxBendingDistanceToTrack; ///< maximum distance to the track to search for compatible cluster(s) in bending direction
352 Double32_t fSigmaCutForTracking; ///< cut in sigma to apply on cluster (local chi2) and track (global chi2) during tracking
354 Double32_t fSigmaCutForImprovement; ///< cut in sigma to apply on cluster (local chi2) during track improvement
356 Double32_t fSigmaCutForTrigger; ///< cut in sigma to apply on track during trigger hit pattern search
358 Double32_t fStripCutForTrigger; ///< cut in strips to apply on trigger track during trigger chamber efficiency
360 Double32_t fMaxStripAreaForTrigger; ///< max. search area in strips to apply on trigger track during trigger chamber efficiency
362 Double32_t fMaxNormChi2MatchTrigger; ///< maximum normalized chi2 of tracking/trigger track matching
364 Double32_t fPercentOfFullClusterInESD; ///< percentage of events for which all cluster info are stored in ESD
366 Bool_t fCombinedClusterTrackReco; ///< switch on/off the combined cluster/track reconstruction
368 Bool_t fTrackAllTracks; ///< kTRUE to track all the possible candidates; kFALSE to track only the best ones
370 Bool_t fRecoverTracks; ///< kTRUE to try to recover the tracks getting lost during reconstruction
372 Bool_t fMakeTrackCandidatesFast; ///< kTRUE to make candidate tracks assuming linear propagation between stations 4 and 5
374 Bool_t fMakeMoreTrackCandidates; ///< kTRUE to make candidate tracks starting from 1 cluster in each of the stations 4 and 5
376 Bool_t fComplementTracks; ///< kTRUE to try to complete the reconstructed tracks by adding missing clusters
378 Bool_t fImproveTracks; ///< kTRUE to try to improve the reconstructed tracks by removing bad clusters
380 Bool_t fUseSmoother; ///< kTRUE to use the smoother to compute track parameters/covariances and local chi2 at each cluster (used for Kalman tracking only)
382 Bool_t fSaveFullClusterInESD; ///< kTRUE to save all cluster info (including pads) in ESD
384 /// calibration mode: GAIN, NOGAIN, GAINCONSTANTCAPA, INJECTIONGAIN
385 TString fCalibrationMode; ///<\brief calibration mode
387 Int_t fBypassSt45; ///< non-zero to use trigger tracks to generate "fake" clusters in St 4 and 5. Can be 0, 4, 5 or 45 only
389 Bool_t fUseChamber[10]; ///< kTRUE to use the chamber i in the tracking algorithm
391 Bool_t fRequestStation[5]; ///< kTRUE to request at least one cluster in station i to validate the track
393 Double32_t fGainA1Limits[2]; ///< Low and High threshold for gain a0 parameter
394 Double32_t fGainA2Limits[2]; ///< Low and High threshold for gain a1 parameter
395 Double32_t fGainThresLimits[2]; ///< Low and High threshold for gain threshold parameter
396 Double32_t fHVSt12Limits[2]; ///< DEPRECATED. See fHVLimits
397 Double32_t fHVSt345Limits[2]; ///< DEPRECATED. See fHVLimits
398 Double32_t fPedMeanLimits[2]; ///< Low and High threshold for pedestal mean
399 Double32_t fPedSigmaLimits[2]; ///< Low and High threshold for pedestal sigma
401 UInt_t fPadGoodnessMask; ///< goodness mask (see AliMUONPadStatusMaker)
403 Double32_t fChargeSigmaCut; ///< number of sigma to cut on adc-ped
405 Double32_t fDefaultNonBendingReso[10]; ///< default chamber resolution in the non-bending direction
406 Double32_t fDefaultBendingReso[10]; ///< default chamber resolution in the bending direction
408 Bool_t fRemoveConnectedTracksInSt12; ///< kTRUE to remove tracks sharing cluster in station 1 and 2
410 Int_t fMaxTriggerTracks; ///< maximum number of trigger tracks above which the tracking is cancelled
411 Int_t fMaxTrackCandidates; ///< maximum number of track candidates above which the tracking abort
413 Bool_t fSelectTrackOnSlope; ///< select track candidates according to their slope (instead of their impact parameter)
415 Double32_t fManuOccupancyLimits[2]; ///< low and high thresholds for manu occupancy cut
416 Double32_t fBuspatchOccupancyLimits[2]; ///< low and high thresholds for bus patch occupancy cut
417 Double32_t fDEOccupancyLimits[2]; ///< low and high thresholds for DE occupancy cut
419 Double32_t fMissingPadFractionLimit; ///< DEPRECATED
420 Double32_t fFractionOfBuspatchOutsideOccupancyLimit; ///< above this limit, we consider we have too many buspatches out of the allowed occupancy range
422 Double32_t fAverageNoisePadCharge; ///< the (truncated, typically at 10%) mean of the sigma of the pedestals, in femto-coulomb
423 Double32_t fClusterChargeCut; ///< the cluster is cut if its charge is below fClusterChargeCut*LowestPadCharge()
425 Double32_t fEventSizeSoftLimit; ///< (soft) limit on mean event size per event (KB)
426 Double32_t fEventSizeHardLimit; ///< (hard) limit on mean event size per event (KB)
428 Double32_t fTokenLostLimit; ///< limit on the fraction of token lost error per event we allow
430 Bool_t fTryRecover; ///< try to recover corrupted raw data
432 Double32_t fHVLimit[10]; // HV limit (below which we consider that chamber efficiency is to be considered zero)
435 void SetLowFluxParam();
436 void SetHighFluxParam();
437 void SetCosmicParam();
438 void SetCalibrationParam();
440 ClassDef(AliMUONRecoParam,169) // MUON reco parameters
441 // we're at 167 not because we had that many versions, but because at some point (version 15->16)
442 // 166 was committed by error, and we did not to go reverse afterwards...