MUON/AliMUONSlatGeometryBuilder.cxx

   1 /**************************************************************************
   2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
   3  *                                                                        *
   4  * Author: The ALICE Off-line Project.                                    *
   5  * Contributors are mentioned in the code where appropriate.              *
   6  *                                                                        *
   7  * Permission to use, copy, modify and distribute this software and its   *
   8  * documentation strictly for non-commercial purposes is hereby granted   *
   9  * without fee, provided that the above copyright notice appears in all   *
  10  * copies and that both the copyright notice and this permission notice   *
  11  * appear in the supporting documentation. The authors make no claims     *
  12  * about the suitability of this software for any purpose. It is          *
  13  * provided "as is" without express or implied warranty.                  *
  14  **************************************************************************/
  15
  16 // $Id$
  17 //
  18
  19 //-----------------------------------------------------------------------------
  20 /// \class AliMUONSlatGeometryBuilder
  21 /// This Builder is designed according to the enveloppe methode. The basic idea is to be able to allow moves
  22 /// of the slats on the support panels.
  23 /// Those moves can be described with a simple set of parameters. The next step should be now to describe all
  24 /// the slats and their places by a unique
  25 /// class, which would make the SlatBuilder far more compact since now only three parameters can define a slat
  26 /// and its position, like:
  27 ///   - Bool_t rounded_shape_slat
  28 ///   - Float_t slat_length
  29 ///   - Float_t slat_number or Float_t slat_position
  30 /// Reference system is the one described in the note ALICE-INT-2003-038  v.2  EDMS Id 406391
  31 ///
  32 /// \author Eric Dumonteil (dumontei@cea.fr)
  33 //-----------------------------------------------------------------------------
  34
  35 #include "AliMUONSlatGeometryBuilder.h"
  36 #include "AliMUON.h"
  37 #include "AliMUONConstants.h"
  38 #include "AliMUONGeometryModule.h"
  39 #include "AliMUONGeometryEnvelopeStore.h"
  40 #include "AliMUONConstants.h"
  41
  42 #include "AliMpDEManager.h"
  43
  44 #include "AliRun.h"
  45 #include "AliLog.h"
  46
  47 #include <TVirtualMC.h>
  48 #include <TGeoBBox.h>
  49 #include <TGeoVolume.h>
  50 #include <TGeoManager.h>
  51 #include <TGeoMatrix.h>
  52 #include <TGeoCompositeShape.h>
  53 #include <TGeoTube.h>
  54 #include <Riostream.h>
  55
  56 /// \cond CLASSIMP
  57 ClassImp(AliMUONSlatGeometryBuilder)
  58 /// \endcond
  59
  60 //______________________________________________________________________________
  61 AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(AliMUON* muon)
  62  : AliMUONVGeometryBuilder(4, 12),
  63    fMUON(muon)
  64 {
  65 /// Standard constructor
  66
  67 }
  68
  69 //______________________________________________________________________________
  70 AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder()
  71  : AliMUONVGeometryBuilder(),
  72    fMUON(0)
  73 {
  74 /// Default constructor
  75 }
  76
  77 //______________________________________________________________________________
  78 AliMUONSlatGeometryBuilder::~AliMUONSlatGeometryBuilder()
  79 {
  80 /// Destructor
  81 }
  82
  83 //
  84 // public methods
  85 //
  86
  87 //______________________________________________________________________________
  88 void AliMUONSlatGeometryBuilder::CreateGeometry()
  89 {
  90   /// CreateGeometry is the method containing all the informations concerning Stations 345 geometry.
  91   /// It includes description and placements of support panels and slats.
  92   /// The code comes directly from what was written in AliMUONv1.cxx before, with modifications concerning
  93   /// the use of Enveloppe method to place the Geant volumes.
  94   /// Now, few changes would allow the creation of a Slat methode where slat could be described by few parameters,
  95   /// and this builder would then be dedicated only to the
  96   /// placements of the slats. Those modifications could shorten the Station 345 geometry by a non-negligeable factor...
  97
  98   Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099;
  99
 100   Float_t angle;
 101   Float_t *dum=0;
 102
 103   // define the id of tracking media:
 104   //  Int_t idAir    = idtmed[1100]; // medium 1
 105   Int_t idGas    = idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%)
 106   Int_t idCopper = idtmed[1110];
 107   Int_t idG10    = idtmed[1111];
 108   Int_t idCarbon = idtmed[1112];
 109   Int_t idRoha   = idtmed[1113];
 110   Int_t idNomex  = idtmed[1114]; // honey comb
 111   Int_t idNoryl  = idtmed[1115];
 112   Int_t idNomexB = idtmed[1116]; // bulk material
 113
 114   // Getting mediums for pannel support geometry
 115   TGeoMedium* kMedNomex     = gGeoManager->GetMedium("MUON_Nomex");
 116   TGeoMedium* kMedCarbon    = gGeoManager->GetMedium("MUON_CARBON");
 117
 118   // sensitive area: 40*40 cm**2
 119   const Float_t kSensLength = 40.;
 120   const Float_t kSensHeight = 40.;
 121   const Float_t kSensWidth  = AliMUONConstants::Pitch()*2;// 0.5 cm, according to TDR fig 2.120
 122   const Int_t kSensMaterial = idGas;
 123   //     const Float_t kYoverlap   = 1.5;
 124
 125   // PCB dimensions in cm; width: 30 mum copper
 126   const Float_t kPcbLength  = kSensLength;
 127   const Float_t kPcbHeight  = 58.; // updated Ch. Finck
 128   const Float_t kPcbWidth   = 0.003;
 129   const Int_t kPcbMaterial  = idCopper;
 130
 131   // Insulating material: 220 mum G10 fiber  glued to pcb
 132   const Float_t kInsuLength = kPcbLength;
 133   const Float_t kInsuHeight = kPcbHeight;
 134   const Float_t kInsuWidth  = 0.022;  // updated Ch. Finck
 135   const Int_t kInsuMaterial = idG10;
 136
 137   // Carbon fiber panels: 200mum carbon/epoxy skin
 138   const Float_t kCarbonWidth  = 0.020;
 139   const Int_t kCarbonMaterial = idCarbon;
 140
 141   // Nomex (honey comb) between the two panel carbon skins
 142   const Float_t kNomexLength = kSensLength;
 143   const Float_t kNomexHeight = kSensHeight;
 144   const Float_t kNomexWidth  = 0.8; // updated Ch. Finck
 145   const Int_t kNomexMaterial = idNomex;
 146
 147   // Bulk Nomex under panel sandwich Ch. Finck
 148   const Float_t kNomexBWidth  = 0.025;
 149   const Int_t kNomexBMaterial = idNomexB;
 150
 151   // Panel sandwich 0.02 carbon*2 + 0.8 nomex
 152   const Float_t kPanelLength = kSensLength;
 153   const Float_t kPanelHeight = kSensHeight;
 154   const Float_t kPanelWidth  = 2 * kCarbonWidth + kNomexWidth;
 155
 156   // Frame along the rounded (spacers) slats
 157   const Float_t kRframeHeight = 2.00;
 158
 159   // spacer around the slat: 2 sticks along length,2 along height
 160   // H: the horizontal ones
 161   const Float_t kHframeLength = kPcbLength;
 162   const Float_t kHframeHeight = 1.95; // updated Ch. Finck
 163   const Float_t kHframeWidth  = kSensWidth;
 164   const Int_t kHframeMaterial = idNoryl;
 165
 166   // V: the vertical ones; vertical spacers
 167   const Float_t kVframeLength = 2.5;
 168   const Float_t kVframeHeight = kSensHeight + kHframeHeight;
 169   const Float_t kVframeWidth  = kSensWidth;
 170   const Int_t kVframeMaterial = idNoryl;
 171
 172   // R: rounded part of vertical spacers
 173   const Float_t kRframeLength = 2.0;
 174   const Float_t kRframeWidth  = kSensWidth;
 175   const Int_t kRframeMaterial = idNoryl;
 176
 177   // B: the horizontal border filled with rohacell: ok Ch. Finck
 178   const Float_t kBframeLength = kHframeLength;
 179   const Float_t kBframeHeight = (kPcbHeight - kSensHeight)/2. - kHframeHeight;
 180   const Float_t kBframeWidth  = kHframeWidth;
 181   const Int_t kBframeMaterial = idRoha;
 182
 183   // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper) for electronics
 184   const Float_t kNulocLength   = 2.5;
 185   const Float_t kNulocHeight   = kBframeHeight;
 186   const Float_t kNulocWidth    = 0.0030 + 0.0014; // equivalent copper width of vetronite;
 187   const Int_t   kNulocMaterial = idCopper;
 188
 189   // Readout cables: Equivalent to 260 mum copper
 190   const Float_t kCableHeight = 2.6;
 191   const Float_t kCableWidth  = 0.026;
 192   const Int_t kCableMaterial = idCopper;
 193
 194   // Slat parameters
 195   const Float_t kSlatHeight = kPcbHeight;
 196   const Float_t kSlatWidth  = kSensWidth + 2.*(kPcbWidth + kInsuWidth + kPanelWidth
 197                                                + kNomexBWidth); //replaced rohacell with Nomex Ch. Finck
 198   // const Int_t   kSlatMaterial = idAir;
 199   const Float_t kDslatLength  = -1.25; // position of the slat respect to the beam plane (half vertical spacer) Ch. Finck
 200   Float_t zSlat               = AliMUONConstants::DzSlat();// implemented Ch. Finck
 201   Float_t dzCh                = AliMUONConstants::DzCh();
 202
 203   Float_t spar[3];
 204   Int_t i, j;
 205   Int_t detElemId;
 206   Int_t moduleId;
 207
 208   // the panel volume contains the nomex
 209   Float_t panelpar[3] = { kPanelLength/2., kPanelHeight/2., kPanelWidth/2. };
 210   Float_t nomexpar[3] = { kNomexLength/2., kNomexHeight/2., kNomexWidth/2. };
 211   Float_t twidth =  kPanelWidth +  kNomexBWidth;
 212   Float_t nomexbpar[3] = {kNomexLength/2., kNomexHeight/2.,twidth/2. };// bulk nomex
 213
 214   // insulating material contains PCB-> gas
 215   twidth = 2*(kInsuWidth + kPcbWidth) + kSensWidth ;
 216   Float_t insupar[3] = {kInsuLength/2., kInsuHeight/2., twidth/2. };
 217   twidth -= 2 * kInsuWidth;
 218   Float_t pcbpar[3]  = {kPcbLength/2., kPcbHeight/2., twidth/2. };
 219   Float_t senspar[3] = {kSensLength/2., kSensHeight/2., kSensWidth/2. };
 220   Float_t theight    = 2 * kHframeHeight + kSensHeight;
 221   Float_t hFramepar[3] = {kHframeLength/2., theight/2., kHframeWidth/2.};
 222   Float_t bFramepar[3] = {kBframeLength/2., kBframeHeight/2., kBframeWidth/2.};
 223   Float_t vFramepar[3] = {kVframeLength/2., kVframeHeight/2., kVframeWidth/2.};
 224   Float_t nulocpar[3]  = {kNulocLength/2.,  kNulocHeight/2.,  kNulocWidth/2.};
 225
 226   Float_t xx;
 227   Float_t xxmax = (kBframeLength - kNulocLength)/2.;
 228   Int_t index=0;
 229   Int_t* fStations = new Int_t[5];
 230   for (Int_t i=0; i<5; i++) fStations[i] = 1;
 231   fStations[2] = 1;
 232
 233   if (fStations[2])
 234     {
 235       //********************************************************************
 236       //                            Station 3                             **
 237       //********************************************************************
 238       // Mother volume for each chamber in St3 is an envelop (or assembly)
 239       // There is one assembly mother per half a chamber
 240       // Mother volume for each chamber in St3 is an envelop (or assembly)
 241       // There is one assembly mother per half a chamber  called SC05I, SC05O, SC06I and SC06O
 242       // volumes for slat geometry (xx=5,..,10 chamber id):
 243       // Sxx0 Sxx1 Sxx2 Sxx3  -->   Slat Mother volumes
 244       // SxxG                          -->   Sensitive volume (gas)
 245       // SxxP                          -->   PCB (copper)
 246       // SxxI                          -->   Insulator (G10)
 247       // SxxC                          -->   Carbon panel
 248       // SxxN                          -->   Nomex comb
 249       // SxxX                          -->   Nomex bulk
 250       // SxxH, SxxV                    -->   Horizontal and Vertical frames (Noryl)
 251       // SB5x                          -->   Volumes for the 35 cm long PCB
 252       // slat dimensions: slat is a MOTHER volume!!! made of air
 253       // Only for chamber 5: slat 1 has a PCB shorter by 5cm!
 254
 255       Float_t tlength = 35.;
 256       Float_t panelpar2[3]  = { tlength/2., panelpar[1],  panelpar[2]};
 257       Float_t nomexpar2[3]  = { tlength/2., nomexpar[1],  nomexpar[2]};
 258       Float_t nomexbpar2[3] = { tlength/2., nomexbpar[1],  nomexbpar[2]};
 259       Float_t insupar2[3]   = { tlength/2., insupar[1],   insupar[2]};
 260       Float_t pcbpar2[3]    = { tlength/2., pcbpar[1],    pcbpar[2]};
 261       Float_t senspar2[3]   = { tlength/2., senspar[1],   senspar[2]};
 262       Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]};
 263       Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]};
 264       Float_t *dum=0;
 265       Float_t pcbDLength3   = (kPcbLength - tlength);
 266
 267       // For rounded pcb of central slat
 268       Float_t csvPcbLength = 59.25-40.; // PQ-LAT-SR1
 269       Float_t panelpar3[3]  = { csvPcbLength/2., panelpar[1],  panelpar[2]};
 270       Float_t nomexpar3[3]  = { csvPcbLength/2., nomexpar[1],  nomexpar[2]};
 271       Float_t nomexbpar3[3] = { csvPcbLength/2., nomexbpar[1],  nomexbpar[2]};
 272       Float_t insupar3[3]   = { csvPcbLength/2., insupar[1],   insupar[2]};
 273       Float_t pcbpar3[3]    = { csvPcbLength/2., pcbpar[1],    pcbpar[2]};
 274       Float_t senspar3[3]   = { csvPcbLength/2., senspar[1],   senspar[2]};
 275       Float_t hFramepar3[3] = { csvPcbLength/2., hFramepar[1], hFramepar[2]};
 276       Float_t bFramepar3[3] = { csvPcbLength/2., bFramepar[1], bFramepar[2]};
 277       Float_t cPhi = TMath::RadToDeg()*(TMath::Pi()/2.-TMath::ACos(hFramepar3[1]/(AliMUONConstants::Rmin(2)-kRframeLength)));
 278       Float_t cFramepar3[5] = { AliMUONConstants::Rmin(2)-kRframeLength, AliMUONConstants::Rmin(2), kRframeWidth, -cPhi, cPhi};
 279
 280       const Int_t   kNslats3         = 5;  // number of slats per quadrant
 281       const Int_t   kNPCB3[kNslats3] = {4, 4, 4, 3, 2}; // n PCB per slat
 282       const Float_t kXpos3[kNslats3] = {0., 0., 0., 0., 0.};//{31., 0., 0., 0., 0.};
 283       const Float_t kYpos3[kNslats3] = {0, 37.8, 37.7, 37.3, 33.7};
 284       Float_t slatLength3[kNslats3];
 285
 286       Float_t rPhi1 = TMath::RadToDeg()*(TMath::ASin((kYpos3[1]-hFramepar3[1])/(AliMUONConstants::Rmin(2))));
 287       Float_t rPhi2 = TMath::RadToDeg()*(TMath::ACos(-vFramepar[0]/(AliMUONConstants::Rmin(2)-kRframeLength)));
 288       Float_t rFramepar3[5] = { AliMUONConstants::Rmin(2)-kRframeLength, AliMUONConstants::Rmin(2), kRframeWidth, rPhi1, rPhi2};
 289       Float_t vrFrameHeight = hFramepar3[1]+kYpos3[1]-AliMUONConstants::Rmin(2)+kRframeLength;
 290
 291       // create and position the slat (mother) volumes
 292
 293       char idSlatCh5[5];
 294       char idSlatCh6[5];
 295       Float_t xSlat3;
 296       Float_t ySlat3 = 0;
 297       Float_t angle = 0.;
 298       Float_t spar2[3];
 299       for (i = 0; i < kNslats3; i++){
 300
 301         slatLength3[i] = kPcbLength * kNPCB3[i] + 2.* kVframeLength;
 302         xSlat3 = slatLength3[i]/2. +  kDslatLength + kXpos3[i];
 303         ySlat3 += kYpos3[i];
 304
 305         spar[0] = slatLength3[i]/2.;
 306         spar[1] = kSlatHeight/2.;
 307         spar[2] = kSlatWidth/2.;
 308         // take away 5 cm from the first slat in chamber 5
 309         if (i == 0 || i == 1 || i == 2) { // 1 pcb is shortened by 5cm
 310           spar2[0] = spar[0] - pcbDLength3/2.;
 311         } else {
 312           spar2[0] = spar[0];
 313         }
 314         spar2[1] = spar[1];
 315         spar2[2] = spar[2];
 316         Float_t dzCh3 = dzCh;
 317         Float_t zSlat3 = (i%2 ==0)? -zSlat : zSlat; // seems not that zSlat3 = zSlat4 & 5 refering to plan PQ7EN345-6 ?
 318
 319         sprintf(idSlatCh5,"LA%d",i+kNslats3-1);
 320         detElemId = 509 - (i + kNslats3-1-4);
 321         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 322         if (detElemId % 2 == 0)
 323             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 324                                                 TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
 325         else
 326             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 327                                                 TGeoRotation("rot1",90,angle,90,270+angle,180,0) );
 328
 329         sprintf(idSlatCh5,"LA%d",3*kNslats3-2+i);
 330         detElemId = 500 + (i + kNslats3-1-4);
 331         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 332         if (detElemId % 2 == 0)
 333             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 334                                                 TGeoRotation("rot2",90,180+angle,90,270+angle,0,0) );
 335         else
 336             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 337                                                 TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
 338
 339         if (i > 0) {
 340           sprintf(idSlatCh5,"LA%d",kNslats3-1-i);
 341           detElemId = 509 + (i + kNslats3-1-4);
 342           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 343           if (detElemId % 2 == 0 && detElemId != 510)
 344               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 345                                                   TGeoRotation("rot3",90,angle,90,90+angle,0,0) );
 346           else
 347               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 348                                                   TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
 349
 350           sprintf(idSlatCh5,"LA%d",3*kNslats3-2-i);
 351           detElemId = 518 - (i + kNslats3-1-4);
 352           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 353           if (detElemId % 2 == 1 && detElemId != 517)
 354               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 355                                                   TGeoRotation("rot4",90,180+angle,90,90+angle,180,0) );
 356           else
 357               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 358                                                   TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) );
 359         }
 360
 361         sprintf(idSlatCh6,"LB%d",kNslats3-1+i);
 362         detElemId = 609 - (i  + kNslats3-1-4);
 363         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 364         if (detElemId % 2 == 0)
 365             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 366                                      TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
 367         else
 368             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 369                                      TGeoRotation("rot5",90,angle,90,270+angle,180,0) );
 370
 371         sprintf(idSlatCh6,"LB%d",3*kNslats3-2+i);
 372         detElemId = 600 + (i + kNslats3-1-4);
 373         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 374         if (detElemId % 2 == 0)
 375             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 376                                                 TGeoRotation("rot6",90,180+angle,90,270+angle,0,0) );
 377         else
 378             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 379                                                 TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
 380
 381         if (i > 0) {
 382           sprintf(idSlatCh6,"LB%d",kNslats3-1-i);
 383           detElemId = 609 + (i + kNslats3-1-4);
 384           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 385           if (detElemId % 2 == 0 && detElemId != 610)
 386               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 387                                                   TGeoRotation("rot7",90,angle,90,90+angle,0,0) );
 388           else
 389               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 390                                                   TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
 391           sprintf(idSlatCh6,"LB%d",3*kNslats3-2-i);
 392           detElemId = 618 - (i + kNslats3-1-4);
 393           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 394           if (detElemId % 2 == 1 && detElemId != 617)
 395               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 396                                                   TGeoRotation("rot8",90,180+angle,90,90+angle,180,0) );
 397           else
 398               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 399                                                   TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
 400         }
 401       }
 402
 403       // create the panel volume
 404
 405       gMC->Gsvolu("S05C","BOX",kCarbonMaterial,panelpar,3);
 406       gMC->Gsvolu("SB5C","BOX",kCarbonMaterial,panelpar2,3);
 407       gMC->Gsvolu("SC5C","BOX",kCarbonMaterial,panelpar3,3);
 408       gMC->Gsvolu("SD5C","BOX",kCarbonMaterial,panelpar,3);
 409       gMC->Gsvolu("S06C","BOX",kCarbonMaterial,panelpar,3);
 410       gMC->Gsvolu("SC6C","BOX",kCarbonMaterial,panelpar3,3);
 411       gMC->Gsvolu("SD6C","BOX",kCarbonMaterial,panelpar,3);
 412
 413       // create the nomex volume (honey comb)
 414
 415       gMC->Gsvolu("S05N","BOX",kNomexMaterial,nomexpar,3);
 416       gMC->Gsvolu("SB5N","BOX",kNomexMaterial,nomexpar2,3);
 417       gMC->Gsvolu("SC5N","BOX",kNomexMaterial,nomexpar3,3);
 418       gMC->Gsvolu("SD5N","BOX",kNomexMaterial,nomexpar,3);
 419       gMC->Gsvolu("S06N","BOX",kNomexMaterial,nomexpar,3);
 420       gMC->Gsvolu("SC6N","BOX",kNomexMaterial,nomexpar3,3);
 421       gMC->Gsvolu("SD6N","BOX",kNomexMaterial,nomexpar,3);
 422
 423       // create the nomex volume (bulk)
 424
 425       gMC->Gsvolu("S05X","BOX",kNomexBMaterial,nomexbpar,3);
 426       gMC->Gsvolu("SB5X","BOX",kNomexBMaterial,nomexbpar2,3);
 427       gMC->Gsvolu("SC5X","BOX",kNomexBMaterial,nomexbpar3,3);
 428       gMC->Gsvolu("SD5X","BOX",kNomexBMaterial,nomexbpar,3);
 429       gMC->Gsvolu("S06X","BOX",kNomexBMaterial,nomexbpar,3);
 430       gMC->Gsvolu("SC6X","BOX",kNomexBMaterial,nomexbpar3,3);
 431       gMC->Gsvolu("SD6X","BOX",kNomexBMaterial,nomexbpar,3);
 432
 433       // create the insulating material volume
 434
 435       gMC->Gsvolu("S05I","BOX",kInsuMaterial,insupar,3);
 436       gMC->Gsvolu("SB5I","BOX",kInsuMaterial,insupar2,3);
 437       gMC->Gsvolu("SC5I","BOX",kInsuMaterial,insupar3,3);
 438       gMC->Gsvolu("SD5I","BOX",kInsuMaterial,insupar,3);
 439       gMC->Gsvolu("S06I","BOX",kInsuMaterial,insupar,3);
 440       gMC->Gsvolu("SC6I","BOX",kInsuMaterial,insupar3,3);
 441       gMC->Gsvolu("SD6I","BOX",kInsuMaterial,insupar,3);
 442
 443       // create the PCB volume
 444
 445       gMC->Gsvolu("S05P","BOX",kPcbMaterial,pcbpar,3);
 446       gMC->Gsvolu("SB5P","BOX",kPcbMaterial,pcbpar2,3);
 447       gMC->Gsvolu("SC5P","BOX",kPcbMaterial,pcbpar3,3);
 448       gMC->Gsvolu("SD5P","BOX",kPcbMaterial,pcbpar,3);
 449       gMC->Gsvolu("S06P","BOX",kPcbMaterial,pcbpar,3);
 450       gMC->Gsvolu("SC6P","BOX",kPcbMaterial,pcbpar3,3);
 451       gMC->Gsvolu("SD6P","BOX",kPcbMaterial,pcbpar,3);
 452
 453       // create the sensitive volumes,
 454
 455       gMC->Gsvolu("S05G","BOX",kSensMaterial,dum,0);
 456       gMC->Gsvolu("SC5G","BOX",kSensMaterial,senspar3,3);
 457       gMC->Gsvolu("SD5G","BOX",kSensMaterial,senspar,3);
 458       gMC->Gsvolu("S06G","BOX",kSensMaterial,dum,0);
 459       gMC->Gsvolu("SC6G","BOX",kSensMaterial,senspar3,3);
 460       gMC->Gsvolu("SD6G","BOX",kSensMaterial,senspar,3);
 461
 462       // create the vertical frame volume
 463
 464       gMC->Gsvolu("S05V","BOX",kVframeMaterial,vFramepar,3);
 465       gMC->Gsvolu("S06V","BOX",kVframeMaterial,vFramepar,3);
 466
 467       // create the rounded vertical frame volume
 468
 469       gMC->Gsvolu("SC5D","TUBS",kRframeMaterial,cFramepar3,5);
 470       gMC->Gsvolu("SD5D","TUBS",kRframeMaterial,rFramepar3,5);
 471       gMC->Gsvolu("SC6D","TUBS",kRframeMaterial,cFramepar3,5);
 472       gMC->Gsvolu("SD6D","TUBS",kRframeMaterial,rFramepar3,5);
 473
 474       // create the horizontal frame volume
 475
 476       gMC->Gsvolu("S05H","BOX",kHframeMaterial,hFramepar,3);
 477       gMC->Gsvolu("SB5H","BOX",kHframeMaterial,hFramepar2,3);
 478       gMC->Gsvolu("SC5H","BOX",kHframeMaterial,hFramepar3,3);
 479       gMC->Gsvolu("SD5H","BOX",kHframeMaterial,hFramepar,3);
 480       gMC->Gsvolu("S06H","BOX",kHframeMaterial,hFramepar,3);
 481       gMC->Gsvolu("SC6H","BOX",kHframeMaterial,hFramepar3,3);
 482       gMC->Gsvolu("SD6H","BOX",kHframeMaterial,hFramepar,3);
 483
 484       // create the horizontal border volume
 485
 486       gMC->Gsvolu("S05B","BOX",kBframeMaterial,bFramepar,3);
 487       gMC->Gsvolu("SB5B","BOX",kBframeMaterial,bFramepar2,3);
 488       gMC->Gsvolu("SC5B","BOX",kBframeMaterial,bFramepar3,3);
 489       gMC->Gsvolu("SD5B","BOX",kBframeMaterial,bFramepar,3);
 490       gMC->Gsvolu("S06B","BOX",kBframeMaterial,bFramepar,3);
 491       gMC->Gsvolu("SC6B","BOX",kBframeMaterial,bFramepar3,3);
 492       gMC->Gsvolu("SD6B","BOX",kBframeMaterial,bFramepar,3);
 493
 494       // Replace the volume shape with a composite shape
 495       // with substracted overlap with beam shield
 496       if ( gMC->IsRootGeometrySupported() ) {
 497
 498         // Get shape
 499         Int_t nSlatType = 2;
 500         Int_t nVol = 8;
 501         const char* slatType = "CD"; // C: central slat; D: rounded slat
 502         const char* volLetter = "CNXIPHBG";
 503         TString volName;
 504         TString compName;
 505         TString csName;
 506         TGeoVolume *mVol = 0x0;
 507         TObjArray centerSlat(nSlatType*((nVol+1)*2));
 508         TObjArray composite(nSlatType*((nVol+1)*2));
 509
 510         // Beam shield recess
 511         new TGeoTube("tubeCut", 0., AliMUONConstants::Rmin(2), kSlatWidth/2.+0.001);
 512         // Displacement
 513         TGeoTranslation* trCTube = new TGeoTranslation("trCTube", -(kPcbLength-csvPcbLength/2.+kVframeLength/2.), 0., 0.);
 514         trCTube->RegisterYourself();
 515         TGeoTranslation* trDTube = new TGeoTranslation("trDTube", -(kPcbLength+kVframeLength)/2., -kYpos3[1], 0.);
 516         trDTube->RegisterYourself();
 517
 518         Float_t cPhi2 = (TMath::Pi()/2.-TMath::ACos((kSensHeight/2.)/(AliMUONConstants::Rmin(2)-kRframeLength)));
 519         TGeoBBox *boxCCut = new TGeoBBox("boxCCut",(cFramepar3[1]-cFramepar3[0]*TMath::Cos(cPhi2))/2., hFramepar3[1], cFramepar3[2]+0.001);
 520         // Displacement
 521         TGeoTranslation* trCBox = new TGeoTranslation("trCBox",cFramepar3[0]*TMath::Cos(cPhi2)+boxCCut->GetDX(), 0., 0.);
 522         trCBox->RegisterYourself();
 523         new TGeoBBox("boxDCut",(kPcbLength+kVframeLength)/2., hFramepar3[1], vFramepar[2]+0.001);
 524         // Displacement
 525         TGeoTranslation* trDBox = new TGeoTranslation("trDBox",kPcbLength/2., kYpos3[1], 0.);
 526         trDBox->RegisterYourself();
 527
 528         TGeoBBox *boxVframe = new TGeoBBox("boxVframe",vFramepar[0],vrFrameHeight/2., vFramepar[2]);
 529         TGeoTranslation* trVBox = new TGeoTranslation("trVBox", 0., AliMUONConstants::Rmin(2)-kRframeLength + boxVframe->GetDY(), 0.);
 530         trVBox->RegisterYourself();
 531
 532         for(int iCh=5; iCh<=6; iCh++){
 533           for (int iSlatType = 0; iSlatType<nSlatType; iSlatType++) {
 534             for (int iVol = 0; iVol<nVol; iVol++){
 535               Int_t lIndex = (iCh-5)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+iVol;
 536               volName=Form("S%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
 537               mVol = gGeoManager->FindVolumeFast(volName);
 538               if ( !mVol ) {
 539                 AliErrorStream()
 540                   << "Slat volume " << volName << " not found" << endl;
 541               }
 542               else {
 543                 centerSlat[lIndex] = mVol->GetShape();
 544                 csName=Form("centerSlat%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
 545                 ((TGeoShape*)centerSlat[lIndex])->SetName(csName);
 546
 547                 // Composite shape
 548                 TString compOperation(csName);
 549                 compOperation+="-tubeCut:tr";
 550                 compOperation+=slatType[iSlatType];
 551                 compOperation+="Tube";
 552                 if (strstr(volName,"B")){
 553                   // Displacement
 554                   TGeoTranslation* trB = new TGeoTranslation("trB", 0., -( kPcbHeight - kBframeHeight ) / 2., 0.);
 555                   trB->RegisterYourself();
 556                   compOperation.ReplaceAll("-tubeCut",":trB-tubeCut");
 557                 }
 558                 compName=Form("composite%d%c",iCh,volLetter[iVol]);
 559                 composite[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
 560
 561                 // Reset shape to volume
 562                 mVol->SetShape((TGeoShape*)composite[lIndex]);
 563               }
 564             }
 565
 566             // For rounded spacer
 567             Int_t lIndex = (iCh-5)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+nVol;
 568             volName=Form("S%c%dD",slatType[iSlatType],iCh);
 569             mVol = gGeoManager->FindVolumeFast(volName);
 570             if ( !mVol ) {
 571               AliErrorStream()
 572                 << "Slat volume " << volName << " not found" << endl;
 573             }
 574             else {
 575               centerSlat[lIndex] = mVol->GetShape();
 576               csName=Form("centerSlat%c%dD",slatType[iSlatType],iCh);
 577               ((TGeoShape*)centerSlat[lIndex])->SetName(csName);
 578
 579               // Composite shape
 580               TString compOperation(csName);
 581               if (strstr(volName,"SC")){
 582                 compOperation+="*boxCCut:trCBox";
 583               }
 584               if (strstr(volName,"SD")){
 585                 compOperation.Prepend("(");
 586                 compOperation+="+boxVframe:trVBox)*boxDCut:trDBox";
 587               }
 588               compName=Form("composite%c%dD",slatType[iSlatType],iCh);
 589               composite[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
 590               // Reset shape to volume
 591               mVol->SetShape((TGeoShape*)composite[lIndex]);
 592             }
 593           }
 594         }
 595       }
 596
 597       index = 0;
 598       for (i = 0; i<kNslats3; i++){
 599         for (Int_t quadrant = 1; quadrant <= 4; quadrant++) {
 600
 601           if (i == 0 && quadrant == 2) continue;
 602           if (i == 0 && quadrant == 4) continue;
 603
 604           sprintf(idSlatCh5,"LA%d",ConvertSlatNum(i,quadrant,kNslats3-1));
 605           sprintf(idSlatCh6,"LB%d",ConvertSlatNum(i,quadrant,kNslats3-1));
 606           Int_t moduleSlatCh5 = GetModuleId(idSlatCh5);
 607           Int_t moduleSlatCh6 = GetModuleId(idSlatCh6);
 608           Float_t xvFrame  = (slatLength3[i] - kVframeLength)/2.;
 609           Float_t xvFrame2  = xvFrame;
 610
 611           if (i == 0 || i == 1 || i == 2) xvFrame2 -= pcbDLength3; // Correct position (J.C.)
 612
 613           // position the vertical frames
 614           if ( i > 2) {
 615             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 616                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 617             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 618                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 619             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 620                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 621             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 622                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 623           }
 624
 625           if (i == 2) {
 626             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 627                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.));
 628             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 629                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 630             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 631                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 632             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 633                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 634           }
 635
 636           if (i == 0 || i == 1) { // first vertical spacers
 637             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 638                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.));
 639             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 640                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 641             if (i == 0) { // rounded spacer for central slat (J.C.)
 642               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5D", idSlatCh5,
 643                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 644               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6D", idSlatCh6,
 645                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 646
 647             }
 648             if (i == 1) { // rounded + vertical spacer for rounded slat (J.C.)
 649               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5D", idSlatCh5,
 650                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos3[1],0.));
 651               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6D", idSlatCh6,
 652                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos3[1],0.));
 653             }
 654           }
 655
 656           // position the panels and the insulating material
 657           for (j = 0; j < kNPCB3[i]; j++){
 658             index++;
 659             Float_t xx = kSensLength * (-kNPCB3[i]/2. + j + 0.5);
 660             Float_t xx2 = xx - pcbDLength3/2.;
 661             Float_t xx3 = xx + (kSensLength-csvPcbLength)/2.;
 662
 663             Float_t zPanel = spar[2] - nomexbpar[2];
 664
 665             if (i==0 && j==0){ // Rounded pcb of central slat (SR1, NR1)
 666               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5X", idSlatCh5, 2*index-1,TGeoTranslation(xx3,0.,zPanel));
 667               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5X", idSlatCh5, 2*index,TGeoTranslation(xx3,0.,-zPanel));
 668               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5I", idSlatCh5, index,TGeoTranslation(xx3,0.,0.));
 669               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6X", idSlatCh6, 2*index-1,TGeoTranslation(xx3,0.,zPanel));
 670               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6X", idSlatCh6, 2*index,TGeoTranslation(xx3,0.,-zPanel));
 671               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6I", idSlatCh6, index,TGeoTranslation(xx3,0.,0.));
 672             } else {
 673               if (i==1 && j==0){ // Rounded pcb of rounded slats (SR2. NR2)
 674                 GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 675                 GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel));
 676                 GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5I", idSlatCh5, index,TGeoTranslation(xx,0.,0.));
 677                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 678                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel));
 679                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6I", idSlatCh6, index,TGeoTranslation(xx,0.,0.));
 680               } else {
 681                 if ( (i == 0 || i == 1 || i == 2) && j == kNPCB3[i]-1) { // 1 pcb is shortened by 5cm
 682                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index-1,TGeoTranslation(xx2,0.,zPanel));
 683                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index,TGeoTranslation(xx2,0.,-zPanel));
 684                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SB5I", idSlatCh5, index,TGeoTranslation(xx2,0.,0.));
 685                 } else {
 686                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 687                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel));
 688                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05I", idSlatCh5, index,TGeoTranslation(xx,0.,0.));
 689                 }
 690                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 691                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel));
 692                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06I", idSlatCh6, index,TGeoTranslation(xx,0.,0.));
 693               }
 694             }
 695           }
 696         }
 697       }
 698
 699       // position the nomex volume inside the panel volume
 700       gMC->Gspos("S05N",1,"S05C",0.,0.,0.,0,"ONLY");
 701       gMC->Gspos("SB5N",1,"SB5C",0.,0.,0.,0,"ONLY");
 702       gMC->Gspos("SC5N",1,"SC5C",0.,0.,0.,0,"ONLY");
 703       gMC->Gspos("SD5N",1,"SD5C",0.,0.,0.,0,"ONLY");
 704       gMC->Gspos("S06N",1,"S06C",0.,0.,0.,0,"ONLY");
 705       gMC->Gspos("SC6N",1,"SC6C",0.,0.,0.,0,"ONLY");
 706       gMC->Gspos("SD6N",1,"SD6C",0.,0.,0.,0,"ONLY");
 707
 708       // position panel volume inside the bulk nomex material volume
 709       gMC->Gspos("S05C",1,"S05X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 710       gMC->Gspos("SB5C",1,"SB5X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 711       gMC->Gspos("SC5C",1,"SC5X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 712       gMC->Gspos("SD5C",1,"SD5X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 713       gMC->Gspos("S06C",1,"S06X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 714       gMC->Gspos("SC6C",1,"SC6X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 715       gMC->Gspos("SD6C",1,"SD6X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 716
 717       // position the PCB volume inside the insulating material volume
 718       gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY");
 719       gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY");
 720       gMC->Gspos("SC5P",1,"SC5I",0.,0.,0.,0,"ONLY");
 721       gMC->Gspos("SD5P",1,"SD5I",0.,0.,0.,0,"ONLY");
 722       gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY");
 723       gMC->Gspos("SC6P",1,"SC6I",0.,0.,0.,0,"ONLY");
 724       gMC->Gspos("SD6P",1,"SD6I",0.,0.,0.,0,"ONLY");
 725
 726       // position the horizontal frame volume inside the PCB volume
 727       gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY");
 728       gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY");
 729       gMC->Gspos("SC5H",1,"SC5P",0.,0.,0.,0,"ONLY");
 730       gMC->Gspos("SD5H",1,"SD5P",0.,0.,0.,0,"ONLY");
 731       gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY");
 732       gMC->Gspos("SC6H",1,"SC6P",0.,0.,0.,0,"ONLY");
 733       gMC->Gspos("SD6H",1,"SD6P",0.,0.,0.,0,"ONLY");
 734
 735       // position the sensitive volume inside the horizontal frame volume
 736       gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3);
 737       gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3);
 738       gMC->Gspos("SC5G",1,"SC5H",0.,0.,0.,0,"ONLY");
 739       gMC->Gspos("SD5G",1,"SD5H",0.,0.,0.,0,"ONLY");
 740       gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3);
 741       gMC->Gspos("SC6G",1,"SC6H",0.,0.,0.,0,"ONLY");
 742       gMC->Gspos("SD6G",1,"SD6H",0.,0.,0.,0,"ONLY");
 743
 744
 745       // position the border volumes inside the PCB volume
 746       Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.;
 747       Int_t rotB = 0;
 748       gMC->Matrix(rotB,90,0,90,270,180,0); // rotation around x for second border
 749
 750       gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY");
 751       gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY");
 752       gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY");
 753       gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY");
 754       gMC->Gspos("SC5B",1,"SC5P",0., 0.,0.,0,"ONLY");
 755       gMC->Gspos("SC5B",2,"SC5P",0., 0.,0.,rotB,"ONLY");
 756       gMC->Gspos("SD5B",1,"SD5P",0., 0.,0.,0,"ONLY");
 757       gMC->Gspos("S05B",1,"SD5P",0., yborder,0.,0,"ONLY");
 758
 759       gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY");
 760       gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY");
 761       gMC->Gspos("SC6B",1,"SC6P",0., 0.,0.,0,"ONLY");
 762       gMC->Gspos("SC6B",2,"SC6P",0., 0.,0.,rotB,"ONLY");
 763       gMC->Gspos("SD6B",1,"SD6P",0., 0.,0.,0,"ONLY");
 764       gMC->Gspos("S06B",1,"SD6P",0., yborder,0.,0,"ONLY");
 765
 766       // create the NULOC volume and position it in the horizontal frame
 767       gMC->Gsvolu("S05E","BOX",kNulocMaterial,nulocpar,3);
 768       gMC->Gsvolu("S06E","BOX",kNulocMaterial,nulocpar,3);
 769       index = 0;
 770       Float_t xxmax2 = xxmax - pcbDLength3/2.;
 771       Float_t xxmax3 = xxmax - (kPcbLength-csvPcbLength)/2.;
 772       Float_t rPhi3 = TMath::ASin((kYpos3[1]-kPcbHeight/2.)/AliMUONConstants::Rmin(2));
 773       Float_t xxmax4 = (AliMUONConstants::Rmin(2)*TMath::Cos(rPhi3)-kVframeLength/2.) - (kBframeLength - kNulocLength)/2.;
 774       for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) {
 775         index++;
 776         gMC->Gspos("S05E",2*index-1,"S05B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
 777         gMC->Gspos("S05E",2*index  ,"S05B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
 778         gMC->Gspos("S06E",2*index-1,"S06B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
 779         gMC->Gspos("S06E",2*index  ,"S06B", xx, 0., kBframeWidth/2.-  kNulocWidth/2, 0, "ONLY");
 780         if (xx > -xxmax2 && xx< xxmax2) {
 781           gMC->Gspos("S05E",2*index-1,"SB5B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 782           gMC->Gspos("S05E",2*index  ,"SB5B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 783         }
 784         if (xx > -xxmax3 && xx< xxmax3) {
 785           gMC->Gspos("S05E",2*index-1,"SC5B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2., 0, "ONLY");
 786           gMC->Gspos("S05E",2*index  ,"SC5B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2., 0, "ONLY");
 787           gMC->Gspos("S06E",2*index-1,"SC6B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 788           gMC->Gspos("S06E",2*index  ,"SC6B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 789         }
 790         if (xx > xxmax4 && xx< xxmax) {
 791           gMC->Gspos("S05E",2*index-1,"SD5B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 792           gMC->Gspos("S05E",2*index  ,"SD5B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 793           gMC->Gspos("S06E",2*index-1,"SD6B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 794           gMC->Gspos("S06E",2*index  ,"SD6B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 795         }
 796       }
 797
 798       //
 799       //Geometry of the support pannel Verticla length 3.62m, horizontal length 1.62m, internal radius  dMotherInner of SC05 and SC06  (F. Orsini, Saclay)
 800       //Carbon fiber of 0.3 mm thick (2 layers) and a central layer of Nomex of 15mm thick.
 801       // Outer excess and inner recess for mother volume radius
 802       // with respect to ROuter and RInner
 803       Float_t dMotherInner = AliMUONConstants::Rmin(2)-kRframeHeight;
 804       Float_t nomexthickness = 1.5;
 805       Float_t carbonthickness = 0.03;
 806       Float_t supporthlength =  162.;  //    chamber 5
 807       Float_t supporthlengthCh6 =  167.;  // chamber 6
 808       Float_t supportvlength =  362.;
 809
 810       // Generating the composite shape of the carbon and nomex pannels
 811       new TGeoBBox("shNomexBoxSt3",supporthlength/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
 812       new TGeoBBox("shCarbonBoxSt3",supporthlength/2., supportvlength/2. ,carbonthickness/2.);
 813       new TGeoBBox("shNomexBoxSt3Ch6",(supporthlengthCh6)/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
 814       new TGeoBBox("shCarbonBoxSt3Ch6",(supporthlengthCh6)/2., supportvlength/2. ,carbonthickness/2.);
 815       new TGeoTubeSeg("shNomexHoleSt3",0., dMotherInner, nomexthickness/2.+carbonthickness+3*kCableWidth+0.001, -90. ,90.);
 816       new TGeoTubeSeg("shCarbonHoleSt3",0., dMotherInner, carbonthickness/2.+0.001, -90. ,90.);
 817       TGeoTranslation* trHoleSt3 = new TGeoTranslation("trHoleSt3",-supporthlength/2.,0.,0.);
 818       trHoleSt3->RegisterYourself();
 819       TGeoTranslation* trHoleSt3Ch6 = new TGeoTranslation("trHoleSt3Ch6",-(supporthlengthCh6)/2.,0.,0.);
 820       trHoleSt3Ch6->RegisterYourself();
 821       TGeoCompositeShape* shNomexSupportSt3  = new TGeoCompositeShape("shNomexSupportSt3","shNomexBoxSt3-shNomexHoleSt3:trHoleSt3");
 822       TGeoCompositeShape* shCarbonSupportSt3 = new TGeoCompositeShape("shCarbonSupportSt3","shCarbonBoxSt3-shCarbonHoleSt3:trHoleSt3");
 823       TGeoCompositeShape* shNomexSupportSt3Ch6  = new TGeoCompositeShape("shNomexSupportSt3Ch6","shNomexBoxSt3Ch6-shNomexHoleSt3:trHoleSt3Ch6");
 824       TGeoCompositeShape* shCarbonSupportSt3Ch6 = new TGeoCompositeShape("shCarbonSupportSt3Ch6","shCarbonBoxSt3Ch6-shCarbonHoleSt3:trHoleSt3Ch6");
 825
 826       // Generating Nomex and Carbon pannel volumes
 827       TGeoVolume * voNomexSupportSt3  = new TGeoVolume("S05S", shNomexSupportSt3, kMedNomex);
 828       TGeoVolume * voCarbonSupportSt3 = new TGeoVolume("S05K", shCarbonSupportSt3, kMedCarbon);
 829       TGeoVolume * voNomexSupportSt3Ch6  = new TGeoVolume("S06S", shNomexSupportSt3Ch6, kMedNomex);
 830       TGeoVolume * voCarbonSupportSt3Ch6 = new TGeoVolume("S06K", shCarbonSupportSt3Ch6, kMedCarbon);
 831
 832       TGeoTranslation *trCarbon1St3   = new TGeoTranslation("trCarbon1St3",0.,0., -(nomexthickness+carbonthickness)/2.);
 833       TGeoTranslation *trCarbon2St3   = new TGeoTranslation("trCarbon2St3",0.,0.,  (nomexthickness+carbonthickness)/2.);
 834       voNomexSupportSt3->AddNode(voCarbonSupportSt3,1,trCarbon1St3);
 835       voNomexSupportSt3->AddNode(voCarbonSupportSt3,2,trCarbon2St3);
 836       voNomexSupportSt3Ch6->AddNode(voCarbonSupportSt3Ch6,1,trCarbon1St3);
 837       voNomexSupportSt3Ch6->AddNode(voCarbonSupportSt3Ch6,2,trCarbon2St3);
 838
 839
 840       // Add readout cables
 841       gMC->Gsvolu("S05L","BOX",kCableMaterial,dum,0);
 842       gMC->Gsvolu("S06L","BOX",kCableMaterial,dum,0);
 843
 844       ySlat3 = 0.;
 845       Float_t lCableX = 0.;
 846       Float_t lCableX6 = 0.;
 847       Float_t lCableY = 0.;
 848       Float_t lCableZ = 0.;
 849       Float_t cablepar[3] = {supporthlength/2., kCableHeight/2., kCableWidth/2.};
 850       Float_t cablepar6[3] = {supporthlengthCh6/2., kCableHeight/2., kCableWidth/2.};
 851       Float_t lCableDY = 0.;
 852       Int_t cIndex = 0;
 853       Int_t cIndex6 = 0;
 854       for (i = 0; i<kNslats3; i++){
 855         Int_t iCable = 1;
 856         cIndex = 0;
 857         cIndex6 = 0;
 858         ySlat3 += kYpos3[i];
 859         lCableY = ySlat3;
 860
 861         // Cables going out from the start of slat
 862         if(kNPCB3[i]>=4){ // Only if 4 or more pcb
 863           // First top cables
 864           cablepar[0] = supporthlength/2.;
 865           lCableX = 0.;
 866           cablepar6[0] = supporthlengthCh6/2.;
 867           lCableX6 = 0.;
 868           lCableDY = (kYpos3[i+1]+kYpos3[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
 869           lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
 870           if(i==0){ // central slat is shorter (rounded)
 871             cablepar[0] -= (kPcbLength-csvPcbLength)/2.;
 872             lCableX = (kPcbLength-csvPcbLength)/2.;
 873             cablepar6[0] -= (kPcbLength-csvPcbLength)/2.;
 874             lCableX6 = (kPcbLength-csvPcbLength)/2.;
 875           }
 876           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
 877           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
 878           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 879           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 880
 881           // Then bottom cables
 882           if(i>0){
 883             if(i==1){ // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
 884               cablepar[0] -= dMotherInner/2.;
 885               lCableX += dMotherInner/2.;
 886               cablepar6[0] -= dMotherInner/2.;
 887               lCableX6 += dMotherInner/2.;
 888               lCableDY = (kYpos3[i]+kYpos3[i])/2.-cablepar[1];
 889             }
 890             if(i>=2){
 891               lCableDY = (kYpos3[i]+kYpos3[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
 892               if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
 893                 lCableDY = lCableY - dMotherInner - cablepar[1];
 894               }
 895             }
 896             gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
 897             gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
 898             gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 899             gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 900           }
 901         }
 902
 903         // Rounded slats have an extra cable starting at second pcb
 904         if(i==1){
 905           // First top cables
 906           cablepar[0] = (supporthlength-kPcbLength-kVframeLength)/2.;
 907           lCableX = (kPcbLength+kVframeLength)/2.;
 908           cablepar6[0] = (supporthlengthCh6-kPcbLength-kVframeLength)/2.;
 909           lCableX6 = (kPcbLength+kVframeLength)/2.;
 910           lCableDY = (kYpos3[i+1]+kYpos3[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
 911           lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
 912           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
 913           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
 914           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 915           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 916           // Then bottom cables
 917           lCableDY = (kYpos3[i]+kYpos3[i])/2.-cablepar[1];
 918           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
 919           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
 920           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 921           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 922         }
 923
 924         // Cables going out from the end of the slats
 925         // First top cables
 926         cablepar[0] = (supporthlength-(slatLength3[i]+kDslatLength)+kVframeLength)/2.;
 927         lCableX = slatLength3[i]-kVframeLength+kDslatLength+cablepar[0]-supporthlength/2.;
 928         cablepar6[0] = (supporthlengthCh6-(slatLength3[i]+kDslatLength)+kVframeLength)/2.;
 929         lCableX6 = slatLength3[i]-kVframeLength+kDslatLength+cablepar6[0]-supporthlengthCh6/2.;
 930         if(i+1>=kNslats3 || i+2>=kNslats3){ // If no more higher slats, then use distance to lower slat
 931           lCableDY = kPcbHeight/2.+cablepar[1];
 932         }
 933         else {
 934           lCableDY = (kYpos3[i+1]+kYpos3[i+2])/2.-cablepar[1];
 935         }
 936         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
 937         if (i<=2){ // shortened pcb
 938           cablepar[0] += pcbDLength3/2.;
 939           lCableX -=  pcbDLength3/2.;
 940         }
 941         gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
 942         gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
 943         gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 944         gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 945         // Then bottom cables
 946         if(i>0){ // Loop is over top half of slats, lower half are symmetric
 947           if (i==1) {
 948             lCableDY = (kYpos3[i]+kYpos3[i])/2.-cablepar[1];
 949           }
 950           else{
 951             lCableDY = (kYpos3[i]+kYpos3[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
 952           }
 953           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
 954           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
 955           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 956           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 957         }
 958       }
 959
 960       Float_t dzCh5  = dzCh;
 961       TGeoTranslation* trSupport1St3   = new TGeoTranslation("trSupport1St3", supporthlength/2., 0. , dzCh5);
 962       TGeoRotation*    roSupportSt3    = new TGeoRotation("roSupportSt3",90.,180.,-90.);
 963       TGeoCombiTrans*  coSupport2St3   = new TGeoCombiTrans(-supporthlength/2., 0., -dzCh5, roSupportSt3);
 964       TGeoTranslation* trSupport1St3Ch6   = new TGeoTranslation("trSupport1St3Ch6", supporthlengthCh6/2., 0. , dzCh5);
 965       TGeoCombiTrans*  coSupport2St3Ch6   = new TGeoCombiTrans(-supporthlengthCh6/2., 0., -dzCh5, roSupportSt3);
 966       GetEnvelopes(5)->AddEnvelope("S05S", 0, 1, *trSupport1St3);
 967       GetEnvelopes(4)->AddEnvelope("S05S", 0, 2, *coSupport2St3);
 968       GetEnvelopes(7)->AddEnvelope("S06S", 0, 1, *trSupport1St3Ch6);
 969       GetEnvelopes(6)->AddEnvelope("S06S", 0, 2, *coSupport2St3Ch6);
 970       // End of pannel support geometry
 971
 972       // cout << "Geometry for Station 3...... done" << endl;
 973     }
 974   if (fStations[3]) {
 975
 976
 977     // //********************************************************************
 978     // //                            Station 4                             **
 979     // //********************************************************************
 980     // Mother volume for each chamber in St4 is an envelop (or assembly)
 981     // There is one assembly mother per half a chamber  called SC07I, SC07O, SC08I and SC08O
 982     // Same volume name definitions as in St3
 983     const Int_t   kNslats4          = 7;  // number of slats per quadrant
 984     const Int_t   kNPCB4[kNslats4]  = {5, 6, 5, 5, 4, 3, 2}; // n PCB per slat
 985     const Float_t kXpos4[kNslats4]  = {38.75, 0., 0., 0., 0., 0., 0.}; // J.C. Correct value
 986     const Float_t kYpos41[kNslats4] = {0., 38.2, 34.40, 36.60, 29.3, 37.0, 28.6};
 987     const Float_t kYpos42[kNslats4] = {0., 38.2, 37.85, 37.55, 29.4, 37.0, 28.6};
 988     Float_t slatLength4[kNslats4];
 989
 990     Float_t rPhi1 = TMath::RadToDeg()*(TMath::ASin((kYpos41[1]-hFramepar[1])/(AliMUONConstants::Rmin(3))));
 991     Float_t rPhi2 = TMath::RadToDeg()*(TMath::ACos(-vFramepar[0]/(AliMUONConstants::Rmin(3)-kRframeLength)));
 992     Float_t rFramepar4[5] = { AliMUONConstants::Rmin(3)-kRframeLength, AliMUONConstants::Rmin(3), kRframeWidth, rPhi1, rPhi2};
 993     Float_t vrFrameHeight = hFramepar[1]+kYpos41[1]-AliMUONConstants::Rmin(3)+kRframeLength;
 994
 995     char idSlatCh7[5];
 996     char idSlatCh8[5];
 997     Float_t xSlat4;
 998     Float_t ySlat41 = 0;
 999     Float_t ySlat42 = 0;
1000     angle = 0.;
1001
1002     for (i = 0; i<kNslats4; i++){
1003       slatLength4[i] = kPcbLength * kNPCB4[i] + 2. * kVframeLength;
1004       xSlat4 = slatLength4[i]/2. + kDslatLength + kXpos4[i];
1005       ySlat41 += kYpos41[i];
1006       ySlat42 += kYpos42[i];
1007
1008       spar[0] = slatLength4[i]/2.;
1009       spar[1] = kSlatHeight/2.;
1010       spar[2] = kSlatWidth/2.;
1011       Float_t dzCh4 = dzCh;
1012       Float_t zSlat4 = (i%2 ==0)? -zSlat : zSlat;
1013
1014       sprintf(idSlatCh7,"LC%d",kNslats4-1+i);
1015       detElemId = 713 - (i + kNslats4-1-6);
1016       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1017       if (detElemId % 2 == 0)
1018           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4),
1019                                    TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
1020       else
1021           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4),
1022                                    TGeoRotation("rot1",90,angle,90,270+angle,180,0) );
1023
1024       sprintf(idSlatCh7,"LC%d",3*kNslats4-2+i);
1025       detElemId = 700 + (i + kNslats4-1-6);
1026       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1027       if (detElemId % 2 == 0)
1028           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4),
1029                                    TGeoRotation("rot2",90,180+angle,90,270+angle,0,0) );
1030       else
1031           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4),
1032                                    TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
1033       if (i > 0) {
1034         sprintf(idSlatCh7,"LC%d",kNslats4-1-i);
1035         detElemId = 713 + (i + kNslats4-1-6);
1036         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1037         if (detElemId % 2 == 0 && detElemId != 714)
1038             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4),
1039                                                 TGeoRotation("rot3",90,angle,90,90+angle,0,0) );
1040         else
1041             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4),
1042                                                 TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
1043         sprintf(idSlatCh7,"LC%d",3*kNslats4-2-i);
1044         detElemId = 726 - (i + kNslats4-1-6);
1045         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1046         if (detElemId % 2 == 1 && detElemId != 725 )
1047             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4),
1048                                      TGeoRotation("rot4",90,180+angle,90,90+angle,180,0) );
1049         else
1050              GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4),
1051                                      TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) );
1052       }
1053
1054       sprintf(idSlatCh8,"LD%d",kNslats4-1+i);
1055       detElemId = 813 - (i + kNslats4-1-6);
1056       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1057       if (detElemId % 2 == 0)
1058           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4),
1059                                    TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
1060       else
1061           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4),
1062                                    TGeoRotation("rot5",90,angle,90,270+angle,180,0) );
1063
1064       sprintf(idSlatCh8,"LD%d",3*kNslats4-2+i);
1065       detElemId = 800 + (i + kNslats4-1-6);
1066       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1067       if (detElemId % 2 == 0)
1068           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4),
1069                                    TGeoRotation("rot6",90,180+angle,90,270+angle,0,0) );
1070       else
1071           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4),
1072                                    TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
1073       if (i > 0) {
1074         sprintf(idSlatCh8,"LD%d",kNslats4-1-i);
1075         detElemId = 813 + (i + kNslats4-1-6);
1076         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1077         if (detElemId % 2 == 0 && detElemId != 814)
1078             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4),
1079                                                 TGeoRotation("rot7",90,angle,90,90+angle,0,0) );
1080         else
1081             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4),
1082                                                 TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
1083         sprintf(idSlatCh8,"LD%d",3*kNslats4-2-i);
1084         detElemId = 826 - (i + kNslats4-1-6);
1085         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1086         if (detElemId % 2 == 1 && detElemId != 825 )
1087             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4),
1088                                      TGeoRotation("rot8",90,180+angle,90,90+angle,180,0) );
1089         else
1090             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4),
1091                                      TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
1092
1093       }
1094     }
1095
1096     // create the panel volume
1097
1098     gMC->Gsvolu("S07C","BOX",kCarbonMaterial,panelpar,3);
1099     gMC->Gsvolu("SD7C","BOX",kCarbonMaterial,panelpar,3);
1100     gMC->Gsvolu("S08C","BOX",kCarbonMaterial,panelpar,3);
1101     gMC->Gsvolu("SD8C","BOX",kCarbonMaterial,panelpar,3);
1102
1103     // create the nomex volume
1104
1105     gMC->Gsvolu("S07N","BOX",kNomexMaterial,nomexpar,3);
1106     gMC->Gsvolu("SD7N","BOX",kNomexMaterial,nomexpar,3);
1107     gMC->Gsvolu("S08N","BOX",kNomexMaterial,nomexpar,3);
1108     gMC->Gsvolu("SD8N","BOX",kNomexMaterial,nomexpar,3);
1109
1110
1111     // create the nomex volume (bulk)
1112
1113     gMC->Gsvolu("S07X","BOX",kNomexBMaterial,nomexbpar,3);
1114     gMC->Gsvolu("SD7X","BOX",kNomexBMaterial,nomexbpar,3);
1115     gMC->Gsvolu("S08X","BOX",kNomexBMaterial,nomexbpar,3);
1116     gMC->Gsvolu("SD8X","BOX",kNomexBMaterial,nomexbpar,3);
1117
1118     // create the insulating material volume
1119
1120     gMC->Gsvolu("S07I","BOX",kInsuMaterial,insupar,3);
1121     gMC->Gsvolu("SD7I","BOX",kInsuMaterial,insupar,3);
1122     gMC->Gsvolu("S08I","BOX",kInsuMaterial,insupar,3);
1123     gMC->Gsvolu("SD8I","BOX",kInsuMaterial,insupar,3);
1124
1125     // create the PCB volume
1126
1127     gMC->Gsvolu("S07P","BOX",kPcbMaterial,pcbpar,3);
1128     gMC->Gsvolu("SD7P","BOX",kPcbMaterial,pcbpar,3);
1129     gMC->Gsvolu("S08P","BOX",kPcbMaterial,pcbpar,3);
1130     gMC->Gsvolu("SD8P","BOX",kPcbMaterial,pcbpar,3);
1131
1132     // create the sensitive volumes,
1133
1134     gMC->Gsvolu("S07G","BOX",kSensMaterial,dum,0);
1135     gMC->Gsvolu("SD7G","BOX",kSensMaterial,senspar,3);
1136     gMC->Gsvolu("S08G","BOX",kSensMaterial,dum,0);
1137     gMC->Gsvolu("SD8G","BOX",kSensMaterial,senspar,3);
1138
1139     // create the vertical frame volume
1140
1141     gMC->Gsvolu("S07V","BOX",kVframeMaterial,vFramepar,3);
1142     gMC->Gsvolu("S08V","BOX",kVframeMaterial,vFramepar,3);
1143
1144     // create the rounded vertical frame volume
1145
1146     gMC->Gsvolu("SD7D","TUBS",kRframeMaterial,rFramepar4,5);
1147     gMC->Gsvolu("SD8D","TUBS",kRframeMaterial,rFramepar4,5);
1148
1149     // create the horizontal frame volume
1150
1151     gMC->Gsvolu("S07H","BOX",kHframeMaterial,hFramepar,3);
1152     gMC->Gsvolu("SD7H","BOX",kHframeMaterial,hFramepar,3);
1153     gMC->Gsvolu("S08H","BOX",kHframeMaterial,hFramepar,3);
1154     gMC->Gsvolu("SD8H","BOX",kHframeMaterial,hFramepar,3);
1155
1156     // create the horizontal border volume
1157
1158     gMC->Gsvolu("S07B","BOX",kBframeMaterial,bFramepar,3);
1159     gMC->Gsvolu("SD7B","BOX",kBframeMaterial,bFramepar,3);
1160     gMC->Gsvolu("S08B","BOX",kBframeMaterial,bFramepar,3);
1161     gMC->Gsvolu("SD8B","BOX",kBframeMaterial,bFramepar,3);
1162
1163     // Replace the volume shape with a composite shape
1164     // with substracted overlap with beam shield
1165     if ( gMC->IsRootGeometrySupported() ) {
1166
1167       // Get shape
1168       Int_t nSlatType = 1;
1169       Int_t nVol = 8;
1170       const char* slatType = "D"; // D: Rounded slat
1171       const char* volLetter = "CNXIPHBG";
1172       TString volName;
1173       TString compName;
1174       TString csName;
1175       TGeoVolume *mVol = 0x0;
1176       // Beam shield recess
1177       new TGeoTube("tube4Cut", 0., AliMUONConstants::Rmin(3), kSlatWidth/2.+0.001);
1178       TObjArray rounded4Slat(nSlatType*((nVol+1)*2));
1179       // Displacement
1180       TGeoTranslation* trDTube4 = new TGeoTranslation("trDTube4", -(kPcbLength+kVframeLength)/2., -kYpos41[1], 0.);
1181       trDTube4->RegisterYourself();
1182       TObjArray composite4(nSlatType*((nVol+1)*2));
1183       new TGeoBBox("box4DCut",(kPcbLength+kVframeLength)/2., hFramepar[1], vFramepar[2]+0.001);
1184       // Displacement
1185       TGeoTranslation* trDBox4 = new TGeoTranslation("trDBox4",kPcbLength/2., kYpos41[1], 0.);
1186       trDBox4->RegisterYourself();
1187
1188       TGeoBBox *box4Vframe = new TGeoBBox("box4Vframe",vFramepar[0],vrFrameHeight/2., vFramepar[2]);
1189       TGeoTranslation* trVBox4 = new TGeoTranslation("trVBox4", 0., AliMUONConstants::Rmin(3)-kRframeLength + box4Vframe->GetDY(), 0.);
1190       trVBox4->RegisterYourself();
1191
1192       for(int iCh=7; iCh<=8; iCh++){
1193         for (int iSlatType = 0; iSlatType<nSlatType; iSlatType++) {
1194           for (int iVol = 0; iVol<nVol; iVol++){
1195             Int_t lIndex = (iCh-7)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+iVol;
1196             volName=Form("S%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
1197             mVol = gGeoManager->FindVolumeFast(volName);
1198             if ( !mVol ) {
1199               AliErrorStream()
1200                 << "Slat volume " << volName << " not found" << endl;
1201             }
1202             else {
1203               rounded4Slat[lIndex] = mVol->GetShape();
1204               csName=Form("rounded4Slat%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
1205               ((TGeoShape*)rounded4Slat[lIndex])->SetName(csName);
1206
1207               // Composite shape
1208               TString compOperation(csName);
1209               compOperation+="-tube4Cut:tr";
1210               compOperation+=slatType[iSlatType];
1211               compOperation+="Tube4";
1212               if (strstr(volName,"B")){
1213                 // Displacement
1214                 Float_t posXb = 0.;
1215                 Float_t posYb = -( kPcbHeight - kBframeHeight ) / 2.;
1216                 Float_t posZb = 0.;
1217                 TGeoTranslation* trB = new TGeoTranslation("trB", posXb, posYb, posZb);
1218                 trB->RegisterYourself();
1219                 compOperation.ReplaceAll("-tube4Cut",":trB-tube4Cut");
1220               }
1221               compName=Form("composite4%d%c",iCh,volLetter[iVol]);
1222               composite4[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1223
1224               // Reset shape to volume
1225               mVol->SetShape((TGeoShape*)composite4[lIndex]);
1226             }
1227           }
1228
1229           // For rounded spacer
1230           Int_t lIndex = (iCh-7)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+nVol;
1231           volName=Form("S%c%dD",slatType[iSlatType],iCh);
1232           mVol = gGeoManager->FindVolumeFast(volName);
1233           if ( !mVol ) {
1234             AliErrorStream()
1235               << "Slat volume " << volName << " not found" << endl;
1236           }
1237           else {
1238             rounded4Slat[lIndex] = mVol->GetShape();
1239             csName=Form("rounded4Slat%c%dD",slatType[iSlatType],iCh);
1240             ((TGeoShape*)rounded4Slat[lIndex])->SetName(csName);
1241
1242             // Composite shape
1243             TString compOperation(csName);
1244             if (strstr(volName,"SD")){
1245               compOperation.Prepend("(");
1246               compOperation+="+box4Vframe:trVBox4)*box4DCut:trDBox4";
1247             }
1248             compName=Form("composite4%c%dD",slatType[iSlatType],iCh);
1249             composite4[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1250             // Reset shape to volume
1251             mVol->SetShape((TGeoShape*)composite4[lIndex]);
1252           }
1253         }
1254       }
1255     }
1256
1257
1258     index = 0;
1259     for (i = 0; i < kNslats4; i++){
1260       for (Int_t quadrant = 1; quadrant <= 4; quadrant++) {
1261
1262         if (i == 0 && quadrant == 2) continue;
1263         if (i == 0 && quadrant == 4) continue;
1264
1265         sprintf(idSlatCh7,"LC%d",ConvertSlatNum(i,quadrant,kNslats4-1));
1266         sprintf(idSlatCh8,"LD%d",ConvertSlatNum(i,quadrant,kNslats4-1));
1267         Int_t moduleSlatCh7 = GetModuleId(idSlatCh7);
1268         Int_t moduleSlatCh8 = GetModuleId(idSlatCh8);
1269
1270         Float_t xvFrame  = (slatLength4[i] - kVframeLength)/2.;
1271
1272         // position the vertical frames
1273         if (i != 1) {
1274           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1275           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1276           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1277           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1278         } else { // Vertical and Rounded+Vertical spacer
1279           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1280           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7D", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos41[1],0.));
1281           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1282           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8D", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos42[1],0.));
1283         }
1284         // position the panels and the insulating material
1285         for (j = 0; j < kNPCB4[i]; j++){
1286           index++;
1287           Float_t xx = kSensLength * (-kNPCB4[i]/2.+j+.5);
1288           Float_t zPanel = spar[2] - nomexbpar[2];
1289           if (i==1 && j==0){ // Rounded pcb of rounded slat
1290             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1291             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel));
1292             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7I", idSlatCh7, index,TGeoTranslation(xx,0.,0.));
1293             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1294             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel));
1295             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8I", idSlatCh8, index,TGeoTranslation(xx,0.,0.));
1296           } else {
1297             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1298             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel));
1299             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07I", idSlatCh7, index,TGeoTranslation(xx,0.,0.));
1300             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1301             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel));
1302             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08I", idSlatCh8, index,TGeoTranslation(xx,0.,0.));
1303           }
1304         }
1305       }
1306     }
1307
1308     // position the nomex volume inside the panel volume
1309     gMC->Gspos("S07N",1,"S07C",0.,0.,0.,0,"ONLY");
1310     gMC->Gspos("SD7N",1,"SD7C",0.,0.,0.,0,"ONLY");
1311     gMC->Gspos("S08N",1,"S08C",0.,0.,0.,0,"ONLY");
1312     gMC->Gspos("SD8N",1,"SD8C",0.,0.,0.,0,"ONLY");
1313
1314     // position panel volume inside the bulk nomex material volume
1315     gMC->Gspos("S07C",1,"S07X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1316     gMC->Gspos("SD7C",1,"SD7X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1317     gMC->Gspos("S08C",1,"S08X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1318     gMC->Gspos("SD8C",1,"SD8X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1319
1320     // position the PCB volume inside the insulating material volume
1321     gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY");
1322     gMC->Gspos("SD7P",1,"SD7I",0.,0.,0.,0,"ONLY");
1323     gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY");
1324     gMC->Gspos("SD8P",1,"SD8I",0.,0.,0.,0,"ONLY");
1325
1326     // position the horizontal frame volume inside the PCB volume
1327     gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY");
1328     gMC->Gspos("SD7H",1,"SD7P",0.,0.,0.,0,"ONLY");
1329     gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY");
1330     gMC->Gspos("SD8H",1,"SD8P",0.,0.,0.,0,"ONLY");
1331
1332     // position the sensitive volume inside the horizontal frame volume
1333     gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3);
1334     gMC->Gspos("SD7G",1,"SD7H",0.,0.,0.,0,"ONLY");
1335     gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3);
1336     gMC->Gspos("SD8G",1,"SD8H",0.,0.,0.,0,"ONLY");
1337
1338     // position the border volumes inside the PCB volume
1339     Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.;
1340     gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY");
1341     gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY");
1342     gMC->Gspos("SD7B",1,"SD7P",0., 0.,0.,0,"ONLY");
1343     gMC->Gspos("S07B",1,"SD7P",0., yborder,0.,0,"ONLY");
1344     gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY");
1345     gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY");
1346     gMC->Gspos("SD8B",1,"SD8P",0., 0.,0.,0,"ONLY");
1347     gMC->Gspos("S08B",1,"SD8P",0., yborder,0.,0,"ONLY");
1348
1349     // create the NULOC volume and position it in the horizontal frame
1350
1351     gMC->Gsvolu("S07E","BOX",kNulocMaterial,nulocpar,3);
1352     gMC->Gsvolu("S08E","BOX",kNulocMaterial,nulocpar,3);
1353     index = 0;
1354     Float_t rPhi3 = TMath::ASin((kYpos41[1]-kPcbHeight/2.)/AliMUONConstants::Rmin(3));
1355     Float_t xxmax4 = (AliMUONConstants::Rmin(3)*TMath::Cos(rPhi3)-kVframeLength/2.) - (kBframeLength - kNulocLength)/2.;
1356     for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) {
1357       index++;
1358       gMC->Gspos("S07E",2*index-1,"S07B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1359       gMC->Gspos("S07E",2*index  ,"S07B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1360       gMC->Gspos("S08E",2*index-1,"S08B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1361       gMC->Gspos("S08E",2*index  ,"S08B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1362     }
1363     if (xx > xxmax4 && xx< xxmax) {
1364       gMC->Gspos("S07E",2*index-1,"SD7B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1365       gMC->Gspos("S07E",2*index  ,"SD7B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1366       gMC->Gspos("S08E",2*index-1,"SD8B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1367       gMC->Gspos("S08E",2*index  ,"SD8B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1368     }
1369
1370     //
1371     //Geometry of the support pannel Verticla length 5.3m, horizontal length 2.6m, internal radius  dMotherInner o SC07 and SC08  (F. Orsini, Saclay)
1372     //Carbon fiber of 0.3 mm thick (2 layers) and a central layer of Nomex of 15mm thick.
1373     Float_t dMotherInner =  AliMUONConstants::Rmin(3)-kRframeHeight;
1374     Float_t nomexthickness = 1.5;
1375     Float_t carbonthickness = 0.03;
1376     Float_t supporthlength =  260.;
1377     Float_t supportvlength =  530.;
1378     // Generating the composite shape of the carbon and nomex pannels
1379     new TGeoBBox("shNomexBoxSt4",supporthlength/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
1380     new TGeoBBox("shCarbonBoxSt4",supporthlength/2., supportvlength/2. ,carbonthickness/2.);
1381     new TGeoTubeSeg("shNomexHoleSt4",0., dMotherInner, nomexthickness/2.+carbonthickness+3*kCableWidth+0.001, -90. ,90.);
1382     new TGeoTubeSeg("shCarbonHoleSt4",0., dMotherInner, carbonthickness/2.+0.001, -90. ,90.);
1383     TGeoTranslation* trHoleSt4 = new TGeoTranslation("trHoleSt4",-supporthlength/2.,0.,0.);
1384     trHoleSt4->RegisterYourself();
1385     TGeoCompositeShape* shNomexSupportSt4  = new TGeoCompositeShape("shNomexSupportSt4","shNomexBoxSt4-shNomexHoleSt4:trHoleSt4");
1386     TGeoCompositeShape* shCarbonSupportSt4 = new TGeoCompositeShape("shCarbonSupportSt4","shCarbonBoxSt4-shCarbonHoleSt4:trHoleSt4");
1387
1388    // Generating Nomex and Carbon pannel volumes
1389     TGeoVolume* voNomexSupportSt4   = new TGeoVolume("S07S", shNomexSupportSt4, kMedNomex);
1390     TGeoVolume* voCarbonSupportSt4  = new TGeoVolume("S07K", shCarbonSupportSt4, kMedCarbon);
1391     TGeoVolume* voNomexSupportSt4Ch8   = new TGeoVolume("S08S", shNomexSupportSt4, kMedNomex);
1392     TGeoVolume* voCarbonSupportSt4Ch8  = new TGeoVolume("S08K", shCarbonSupportSt4, kMedCarbon);
1393     TGeoTranslation* trCarbon1St4   = new TGeoTranslation("trCarbon1St4",0.,0., -(nomexthickness+carbonthickness)/2.);
1394     TGeoTranslation* trCarbon2St4   = new TGeoTranslation("trCarbon2St4",0.,0.,  (nomexthickness+carbonthickness)/2.);
1395     voNomexSupportSt4->AddNode(voCarbonSupportSt4,1,trCarbon1St4);
1396     voNomexSupportSt4->AddNode(voCarbonSupportSt4,2,trCarbon2St4);
1397     voNomexSupportSt4Ch8->AddNode(voCarbonSupportSt4Ch8,1,trCarbon1St4);
1398     voNomexSupportSt4Ch8->AddNode(voCarbonSupportSt4Ch8,2,trCarbon2St4);
1399
1400     // Add readout cables
1401     gMC->Gsvolu("S07L","BOX",kCableMaterial,dum,0);
1402     gMC->Gsvolu("S08L","BOX",kCableMaterial,dum,0);
1403
1404     ySlat41 = 0.;
1405     ySlat42 = 0.;
1406     Float_t lCableX = 0.;
1407     Float_t lCableY = 0.;
1408     Float_t lCableY8 = 0.;
1409     Float_t lCableZ = 0.;
1410     Float_t cablepar[3] = {supporthlength/2., kCableHeight/2., kCableWidth/2.};
1411     Float_t lCableDY = 0.;
1412     Float_t lCableDY8 = 0.;
1413     for (i = 0; i<kNslats4; i++){
1414       Int_t iCable = 1;
1415       Int_t cIndex = 0;
1416       Int_t cIndex8 = 0;
1417       ySlat41 += kYpos41[i];
1418       ySlat42 += kYpos42[i];
1419
1420       lCableY = ySlat41;
1421       lCableY8 = ySlat42;
1422
1423       // Cables going out from the start of slat
1424       if(kNPCB4[i]>=4){ // Only if 4 or more pcb
1425         // First top cables
1426         cablepar[0] = (supporthlength-kXpos4[i])/2.;
1427         lCableX = kXpos4[i]/2.;
1428         lCableDY = (kYpos41[i+1]+kYpos41[i+2])/2.-cablepar[1];
1429         lCableDY8 = (kYpos42[i+1]+kYpos42[i+2])/2.-cablepar[1];
1430         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
1431         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1432         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1433         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8+lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1434         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8+lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1435         // Then bottom cables
1436         if (i>0){
1437           if (i==1) { // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
1438             cablepar[0] = (supporthlength-kXpos4[i]-dMotherInner)/2.;
1439             lCableX = (kXpos4[i]+dMotherInner)/2.;
1440             lCableDY = (kYpos41[i]+kYpos41[i])/2.-cablepar[1];
1441             lCableDY8 = (kYpos42[i]+kYpos42[i])/2.-cablepar[1];
1442           }
1443           if (i>=2) {
1444             lCableDY = (kYpos41[i]+kYpos41[i-1])/2.-cablepar[1];
1445             if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
1446               lCableDY = lCableY - dMotherInner - cablepar[1];
1447             }
1448             lCableDY8 = (kYpos42[i]+kYpos42[i-1])/2.-cablepar[1];
1449             if ((lCableY8-lCableDY8)<(dMotherInner+cablepar[1])){
1450               lCableDY8 = lCableY8 - dMotherInner - cablepar[1];
1451             }
1452           }
1453           gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
1454           gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
1455           gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8-lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1456           gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8-lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1457         }
1458       }
1459
1460       // Rounded slats have an extra cable starting at second pcb
1461       if(i==1){
1462         // Only on top
1463         cablepar[0] = (supporthlength-kPcbLength-kVframeLength)/2.;
1464         lCableX = (kPcbLength+kVframeLength)/2.;
1465         lCableDY = (kYpos41[i+1]+kYpos41[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
1466         lCableDY8 = (kYpos42[i+1]+kYpos42[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
1467         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
1468         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1469         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1470         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8+lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1471         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8+lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1472       }
1473
1474       // Cables going out from the end of the slats
1475       cablepar[0] = (supporthlength-(slatLength4[i]+kXpos4[i]+kDslatLength)+kVframeLength)/2.;
1476       lCableX = slatLength4[i]+kXpos4[i]-kVframeLength+kDslatLength+cablepar[0]-supporthlength/2.;
1477       if(i+1>=kNslats4 || i+2>=kNslats4){ // If no more higher slats, then use distance to lower slat
1478         lCableDY = kPcbHeight/2.+cablepar[1];
1479         lCableDY8 = lCableDY;
1480       }
1481       else {
1482         lCableDY = (kYpos41[i+1]+kYpos41[i+2])/2.-cablepar[1];
1483         lCableDY8 = (kYpos42[i+1]+kYpos42[i+2])/2.-cablepar[1];
1484       }
1485       lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
1486       gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1487       gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1488       gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8+lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1489       gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8+lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1490       // Then bottom cables
1491       if(i>0){
1492         if (i==1) {
1493           lCableDY = (kYpos41[i]+kYpos41[i])/2.-cablepar[1];
1494           lCableDY8 = (kYpos42[i]+kYpos42[i])/2.-cablepar[1];
1495         }
1496         else{
1497           lCableDY = (kYpos41[i]+kYpos41[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
1498           if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
1499             lCableDY = lCableY - dMotherInner - cablepar[1];
1500           }
1501           lCableDY8 = (kYpos42[i]+kYpos42[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
1502           if ((lCableY8-lCableDY8)<(dMotherInner+cablepar[1])){
1503             lCableDY8 = lCableY8 - dMotherInner - cablepar[1];
1504           }
1505         }
1506         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
1507         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
1508         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8-lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1509         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8-lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1510       }
1511     }
1512
1513     Float_t dzCh7  = dzCh;
1514     TGeoTranslation* trSupport1St4   = new TGeoTranslation("trSupport1St4", supporthlength/2., 0. , dzCh7);
1515     TGeoRotation*    roSupportSt4    = new TGeoRotation("roSupportSt4",90.,180.,-90.);
1516     TGeoCombiTrans*  coSupport2St4   = new TGeoCombiTrans(-supporthlength/2., 0., -dzCh7, roSupportSt4);
1517     GetEnvelopes(9)->AddEnvelope("S07S", 0, 1, *trSupport1St4);
1518     GetEnvelopes(8)->AddEnvelope("S07S", 0, 2, *coSupport2St4);
1519     GetEnvelopes(11)->AddEnvelope("S08S", 0, 1, *trSupport1St4);
1520     GetEnvelopes(10)->AddEnvelope("S08S", 0, 2, *coSupport2St4);
1521
1522     // End of pannel support geometry
1523
1524     // cout << "Geometry for Station 4...... done" << endl;
1525
1526   }
1527
1528   if (fStations[4]) {
1529
1530
1531     // //********************************************************************
1532     // //                            Station 5                             **
1533     // //********************************************************************
1534     // Mother volume for each chamber in St4 is an envelop (or assembly)
1535     // There is one assembly mother per half a chamber  called SC09I, SC09O, SC10I and SC10O
1536     // Same volume name definitions as in St3
1537
1538     const Int_t   kNslats5         = 7;  // number of slats per quadrant
1539     const Int_t   kNPCB5[kNslats5] = {5, 6, 6, 6, 5, 4, 3}; // n PCB per slat
1540     const Float_t kXpos5[kNslats5] = {38.75, 0., 0., 0., 0., 0., 0.}; // J.C. Correct value
1541     const Float_t kYpos5[kNslats5] = {0., 38.2, 37.9, 37.6, 37.3, 37.05, 36.75};
1542     Float_t slatLength5[kNslats5];
1543
1544     Float_t rPhi1 = TMath::RadToDeg()*(TMath::ASin((kYpos5[1]-hFramepar[1])/(AliMUONConstants::Rmin(4))));
1545     Float_t rPhi2 = TMath::RadToDeg()*(TMath::ACos(-vFramepar[0]/(AliMUONConstants::Rmin(4)-kRframeLength)));
1546     Float_t rFramepar5[5] = { AliMUONConstants::Rmin(4)-kRframeLength, AliMUONConstants::Rmin(4), kRframeWidth, rPhi1, rPhi2};
1547     Float_t vrFrameHeight = hFramepar[1]+kYpos5[1]-AliMUONConstants::Rmin(4)+kRframeLength;
1548
1549     char idSlatCh9[5];
1550     char idSlatCh10[5];
1551     Float_t xSlat5;
1552     Float_t ySlat5 = 0;
1553     angle = 0.;
1554
1555     for (i = 0; i < kNslats5; i++){
1556
1557       slatLength5[i] = kPcbLength * kNPCB5[i] + 2.* kVframeLength;
1558       xSlat5 = slatLength5[i]/2. + kDslatLength + kXpos5[i];
1559       ySlat5 += kYpos5[i];
1560
1561       spar[0] = slatLength5[i]/2.;
1562       spar[1] = kSlatHeight/2.;
1563       spar[2] = kSlatWidth/2.;
1564
1565       Float_t dzCh5  = dzCh;
1566       Float_t zSlat5 = (i%2 ==0)? -zSlat : zSlat;
1567
1568       sprintf(idSlatCh9,"LE%d",kNslats5-1+i);
1569       detElemId = 913 - (i + kNslats5-1-6);
1570       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1571       if (detElemId % 2 == 0)
1572           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1573                                               TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
1574       else
1575           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1576                                               TGeoRotation("rot1",90,angle,90,270+angle,180,0) );
1577       sprintf(idSlatCh9,"LE%d",3*kNslats5-2+i);
1578       detElemId = 900 + (i + kNslats5-1-6);
1579       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1580       if (detElemId % 2 == 0)
1581           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1582                                               TGeoRotation("rot2",90,180+angle,90,270+angle,0,0) );
1583       else
1584           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1585                                               TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
1586       if (i > 0) {
1587         sprintf(idSlatCh9,"LE%d",kNslats5-1-i);
1588         detElemId = 913 + (i + kNslats5-1-6);
1589         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1590       if (detElemId % 2 == 0  && detElemId != 914)
1591           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1592                                      TGeoRotation("rot3",90,angle,90,90+angle,0,0) );
1593       else
1594           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1595                                      TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
1596         sprintf(idSlatCh9,"LE%d",3*kNslats5-2-i);
1597         detElemId = 926 - (i + kNslats5-1-6);
1598         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1599         if (detElemId % 2 == 1 && detElemId != 925 )
1600             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1601                                                 TGeoRotation("rot4",90,180+angle,90,90+angle,180,0)  );
1602         else
1603             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1604                                                 TGeoRotation("rot4",90,180+angle,90,270+angle,0,0)  );
1605       }
1606
1607       sprintf(idSlatCh10,"LF%d",kNslats5-1+i);
1608       detElemId = 1013 - (i + kNslats5-1-6);
1609       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1610       if (detElemId % 2 == 0)
1611           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1612                                               TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
1613       else
1614           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1615                                               TGeoRotation("rot5",90,angle,90,270+angle,180,0) );
1616
1617       sprintf(idSlatCh10,"LF%d",3*kNslats5-2+i);
1618       detElemId = 1000 + (i + kNslats5-1-6);
1619       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1620       if (detElemId % 2 == 0)
1621           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1622                                               TGeoRotation("rot6",90,180+angle,90,270+angle,0,0) );
1623       else
1624           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1625                                               TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
1626       if (i > 0) {
1627         sprintf(idSlatCh10,"LF%d",kNslats5-1-i);
1628         detElemId = 1013 + (i + kNslats5-1-6);
1629         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1630       if (detElemId % 2 == 0  && detElemId != 1014)
1631           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1632                                      TGeoRotation("rot7",90,angle,90,90+angle,0,0) );
1633       else
1634           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1635                                      TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
1636         sprintf(idSlatCh10,"LF%d",3*kNslats5-2-i);
1637         detElemId = 1026 - (i + kNslats5-1-6);
1638         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1639         if (detElemId % 2 == 1 && detElemId != 1025 )
1640             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1641                                               TGeoRotation("rot8",90,180+angle,90,90+angle,180,0) );
1642         else
1643             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1644                                               TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
1645       }
1646     }
1647
1648     // create the panel volume
1649
1650     gMC->Gsvolu("S09C","BOX",kCarbonMaterial,panelpar,3);
1651     gMC->Gsvolu("SD9C","BOX",kCarbonMaterial,panelpar,3);
1652     gMC->Gsvolu("S10C","BOX",kCarbonMaterial,panelpar,3);
1653     gMC->Gsvolu("SD0C","BOX",kCarbonMaterial,panelpar,3);
1654
1655     // create the nomex volume
1656
1657     gMC->Gsvolu("S09N","BOX",kNomexMaterial,nomexpar,3);
1658     gMC->Gsvolu("SD9N","BOX",kNomexMaterial,nomexpar,3);
1659     gMC->Gsvolu("S10N","BOX",kNomexMaterial,nomexpar,3);
1660     gMC->Gsvolu("SD0N","BOX",kNomexMaterial,nomexpar,3);
1661
1662
1663     // create the nomex volume (bulk)
1664
1665     gMC->Gsvolu("S09X","BOX",kNomexBMaterial,nomexbpar,3);
1666     gMC->Gsvolu("SD9X","BOX",kNomexBMaterial,nomexbpar,3);
1667     gMC->Gsvolu("S10X","BOX",kNomexBMaterial,nomexbpar,3);
1668     gMC->Gsvolu("SD0X","BOX",kNomexBMaterial,nomexbpar,3);
1669
1670     // create the insulating material volume
1671
1672     gMC->Gsvolu("S09I","BOX",kInsuMaterial,insupar,3);
1673     gMC->Gsvolu("SD9I","BOX",kInsuMaterial,insupar,3);
1674     gMC->Gsvolu("S10I","BOX",kInsuMaterial,insupar,3);
1675     gMC->Gsvolu("SD0I","BOX",kInsuMaterial,insupar,3);
1676
1677     // create the PCB volume
1678
1679     gMC->Gsvolu("S09P","BOX",kPcbMaterial,pcbpar,3);
1680     gMC->Gsvolu("SD9P","BOX",kPcbMaterial,pcbpar,3);
1681     gMC->Gsvolu("S10P","BOX",kPcbMaterial,pcbpar,3);
1682     gMC->Gsvolu("SD0P","BOX",kPcbMaterial,pcbpar,3);
1683
1684     // create the sensitive volumes,
1685
1686     gMC->Gsvolu("S09G","BOX",kSensMaterial,dum,0);
1687     gMC->Gsvolu("SD9G","BOX",kSensMaterial,senspar,3);
1688     gMC->Gsvolu("S10G","BOX",kSensMaterial,dum,0);
1689     gMC->Gsvolu("SD0G","BOX",kSensMaterial,senspar,3);
1690
1691     // create the vertical frame volume
1692
1693     gMC->Gsvolu("S09V","BOX",kVframeMaterial,vFramepar,3);
1694     gMC->Gsvolu("S10V","BOX",kVframeMaterial,vFramepar,3);
1695
1696     // create the rounded vertical frame volume
1697
1698     gMC->Gsvolu("SD9D","TUBS",kRframeMaterial,rFramepar5,5);
1699     gMC->Gsvolu("SD0D","TUBS",kRframeMaterial,rFramepar5,5);
1700
1701     // create the horizontal frame volume
1702
1703     gMC->Gsvolu("S09H","BOX",kHframeMaterial,hFramepar,3);
1704     gMC->Gsvolu("SD9H","BOX",kHframeMaterial,hFramepar,3);
1705     gMC->Gsvolu("S10H","BOX",kHframeMaterial,hFramepar,3);
1706     gMC->Gsvolu("SD0H","BOX",kHframeMaterial,hFramepar,3);
1707
1708     // create the horizontal border volume
1709
1710     gMC->Gsvolu("S09B","BOX",kBframeMaterial,bFramepar,3);
1711     gMC->Gsvolu("SD9B","BOX",kBframeMaterial,bFramepar,3);
1712     gMC->Gsvolu("S10B","BOX",kBframeMaterial,bFramepar,3);
1713     gMC->Gsvolu("SD0B","BOX",kBframeMaterial,bFramepar,3);
1714
1715     // Replace the volume shape with a composite shape
1716     // with substracted overlap with beam shield
1717     if ( gMC->IsRootGeometrySupported() ) {
1718
1719       // Get shape
1720       Int_t nSlatType = 1;
1721       Int_t nVol = 8;
1722       const char* slatType = "D"; // D: Rounde slat
1723       const char* volLetter = "CNXIPHBG";
1724       TString volName;
1725       TString compName;
1726       TString csName;
1727       TGeoVolume *mVol = 0x0;
1728       // Beam shield recess
1729       new TGeoTube("tube5Cut", 0., AliMUONConstants::Rmin(4), kSlatWidth/2.+0.001);
1730       TObjArray rounded5Slat(nSlatType*((nVol+1)*2));
1731       // Displacement
1732       TGeoTranslation* trDTube5 = new TGeoTranslation("trDTube5", -(kPcbLength+kVframeLength)/2., -kYpos5[1], 0.);
1733       trDTube5->RegisterYourself();
1734       TObjArray composite5(nSlatType*((nVol+1)*2));
1735       new TGeoBBox("box5DCut",(kPcbLength+kVframeLength)/2., hFramepar[1], vFramepar[2]+0.001);
1736       // Displacement
1737       TGeoTranslation* trDBox5 = new TGeoTranslation("trDBox5",kPcbLength/2., kYpos5[1], 0.);
1738       trDBox5->RegisterYourself();
1739
1740       TGeoBBox *box5Vframe = new TGeoBBox("box5Vframe",vFramepar[0],vrFrameHeight/2., vFramepar[2]);
1741       TGeoTranslation* trVBox5 = new TGeoTranslation("trVBox5", 0., AliMUONConstants::Rmin(4)-kRframeLength + box5Vframe->GetDY(), 0.);
1742       trVBox5->RegisterYourself();
1743
1744       for(int iCh=9; iCh<=10; iCh++){
1745         for (int iSlatType = 0; iSlatType<nSlatType; iSlatType++) {
1746           for (int iVol = 0; iVol<nVol; iVol++){
1747             Int_t lIndex = (iCh-9)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+iVol;
1748             volName=Form("S%c%d%c",slatType[iSlatType],iCh%10,volLetter[iVol]);
1749             mVol = gGeoManager->FindVolumeFast(volName);
1750             if ( !mVol ) {
1751               AliErrorStream()
1752                 << "Slat volume " << volName << " not found" << endl;
1753             }
1754             else {
1755               rounded5Slat[lIndex] = mVol->GetShape();
1756               csName=Form("rounded5Slat%c%d%c",slatType[iSlatType],iCh%10,volLetter[iVol]);
1757               ((TGeoShape*)rounded5Slat[lIndex])->SetName(csName);
1758
1759               // Composite shape
1760               TString compOperation(csName);
1761               compOperation+="-tube5Cut:tr";
1762               compOperation+=slatType[iSlatType];
1763               compOperation+="Tube5";
1764               if (strstr(volName,"B")){
1765                 // Displacement
1766                 TGeoTranslation* trB = new TGeoTranslation("trB", 0., -(kPcbHeight - kBframeHeight)/2., 0.);
1767                 trB->RegisterYourself();
1768                 compOperation.ReplaceAll("-tube5Cut",":trB-tube5Cut");
1769               }
1770               compName=Form("composite5%d%c",iCh,volLetter[iVol]);
1771               composite5[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1772
1773               // Reset shape to volume
1774               mVol->SetShape((TGeoShape*)composite5[lIndex]);
1775             }
1776           }
1777
1778           // For rounded spacer
1779           Int_t lIndex = (iCh-9)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+nVol;
1780           volName=Form("S%c%dD",slatType[iSlatType],iCh%10);
1781           mVol = gGeoManager->FindVolumeFast(volName);
1782           if ( !mVol ) {
1783             AliErrorStream()
1784               << "Slat volume " << volName << " not found" << endl;
1785           }
1786           else {
1787             rounded5Slat[lIndex] = mVol->GetShape();
1788             csName=Form("rounded5Slat%c%dD",slatType[iSlatType],iCh%10);
1789             ((TGeoShape*)rounded5Slat[lIndex])->SetName(csName);
1790
1791             // Composite shape
1792             TString compOperation(csName);
1793             if (strstr(volName,"SD")){
1794               compOperation.Prepend("(");
1795               compOperation+="+box5Vframe:trVBox5)*box5DCut:trDBox5";
1796             }
1797             compName=Form("composite5%c%dD",slatType[iSlatType],iCh%10);
1798             composite5[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1799             // Reset shape to volume
1800             mVol->SetShape((TGeoShape*)composite5[lIndex]);
1801           }
1802         }
1803       }
1804     }
1805
1806     index = 0;
1807     for (i = 0; i < kNslats5; i++){
1808       for (Int_t quadrant = 1; quadrant <= 4; quadrant++) {
1809
1810         if (i == 0 && quadrant == 2) continue;
1811         if (i == 0 && quadrant == 4) continue;
1812
1813         sprintf(idSlatCh9,"LE%d",ConvertSlatNum(i,quadrant,kNslats5-1));
1814         sprintf(idSlatCh10,"LF%d",ConvertSlatNum(i,quadrant,kNslats5-1));
1815         Int_t moduleSlatCh9 = GetModuleId(idSlatCh9);
1816         Int_t moduleSlatCh10 = GetModuleId(idSlatCh10);
1817         Float_t xvFrame  = (slatLength5[i] - kVframeLength)/2.; // ok
1818
1819         // position the vertical frames (spacers)
1820         if (i != 1) {
1821           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1822           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1823           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1824           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1825         } else {  // Vertical and Rounded+Vertical spacer
1826           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1827           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9D", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos5[1],0.));
1828           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1829           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0D", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos5[1],0.));
1830         }
1831
1832         // position the panels and the insulating material
1833         for (j = 0; j < kNPCB5[i]; j++){
1834           index++;
1835           Float_t xx = kSensLength * (-kNPCB5[i]/2.+j+.5);
1836
1837           Float_t zPanel = spar[2] - nomexbpar[2];
1838           if (i==1 && j==0){ // Rounded pcb of rounded slat
1839             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1840             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel));
1841             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9I", idSlatCh9, index,TGeoTranslation(xx,0.,0.));
1842             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1843             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel));
1844             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0I", idSlatCh10, index,TGeoTranslation(xx,0.,0.));
1845           } else {
1846             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1847             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel));
1848             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09I", idSlatCh9, index,TGeoTranslation(xx,0.,0.));
1849
1850             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1851             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel));
1852             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10I", idSlatCh10, index,TGeoTranslation(xx,0.,0.));
1853           }
1854         }
1855       }
1856     }
1857
1858     // position the nomex volume inside the panel volume
1859     gMC->Gspos("S09N",1,"S09C",0.,0.,0.,0,"ONLY");
1860     gMC->Gspos("SD9N",1,"SD9C",0.,0.,0.,0,"ONLY");
1861     gMC->Gspos("S10N",1,"S10C",0.,0.,0.,0,"ONLY");
1862     gMC->Gspos("SD0N",1,"SD0C",0.,0.,0.,0,"ONLY");
1863
1864     // position panel  volume inside the bulk nomex material volume
1865     gMC->Gspos("S09C",1,"S09X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1866     gMC->Gspos("SD9C",1,"SD9X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1867     gMC->Gspos("S10C",1,"S10X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1868     gMC->Gspos("SD0C",1,"SD0X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1869
1870     // position the PCB volume inside the insulating material volume
1871     gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY");
1872     gMC->Gspos("SD9P",1,"SD9I",0.,0.,0.,0,"ONLY");
1873     gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY");
1874     gMC->Gspos("SD0P",1,"SD0I",0.,0.,0.,0,"ONLY");
1875
1876     // position the horizontal frame volume inside the PCB volume
1877     gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY");
1878     gMC->Gspos("SD9H",1,"SD9P",0.,0.,0.,0,"ONLY");
1879     gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY");
1880     gMC->Gspos("SD0H",1,"SD0P",0.,0.,0.,0,"ONLY");
1881
1882     // position the sensitive volume inside the horizontal frame volume
1883     gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3);
1884     gMC->Gspos("SD9G",1,"SD9H",0.,0.,0.,0,"ONLY");
1885     gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3);
1886     gMC->Gspos("SD0G",1,"SD0H",0.,0.,0.,0,"ONLY");
1887
1888     // position the border volumes inside the PCB volume
1889     Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.;
1890     gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY");
1891     gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY");
1892     gMC->Gspos("SD9B",1,"SD9P",0., 0.,0.,0,"ONLY");
1893     gMC->Gspos("S09B",1,"SD9P",0., yborder,0.,0,"ONLY");
1894     gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY");
1895     gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY");
1896     gMC->Gspos("SD0B",1,"SD0P",0., 0.,0.,0,"ONLY");
1897     gMC->Gspos("S10B",1,"SD0P",0., yborder,0.,0,"ONLY");
1898
1899     //      // create the NULOC volume and position it in the horizontal frame
1900
1901     gMC->Gsvolu("S09E","BOX",kNulocMaterial,nulocpar,3);
1902     gMC->Gsvolu("S10E","BOX",kNulocMaterial,nulocpar,3);
1903     index = 0;
1904     Float_t rPhi3 = TMath::ASin((kYpos5[1]-kPcbHeight/2.)/AliMUONConstants::Rmin(4));
1905     Float_t xxmax4 = (AliMUONConstants::Rmin(4)*TMath::Cos(rPhi3)-kVframeLength/2.) - (kBframeLength - kNulocLength)/2.;
1906     for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) {
1907       index++;
1908       gMC->Gspos("S09E",2*index-1,"S09B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1909       gMC->Gspos("S09E",2*index  ,"S09B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1910       gMC->Gspos("S10E",2*index-1,"S10B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1911       gMC->Gspos("S10E",2*index  ,"S10B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1912     }
1913     if (xx > xxmax4 && xx< xxmax) {
1914       gMC->Gspos("S09E",2*index-1,"SD9B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1915       gMC->Gspos("S09E",2*index  ,"SD9B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1916       gMC->Gspos("S10E",2*index-1,"SD0B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1917       gMC->Gspos("S10E",2*index  ,"SD0B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1918     }
1919
1920     //
1921     //Geometry of the support pannel Verticla length 5.7m, horizontal length 2.6m, internal radius  dMotherInner o SC09 and SC10  (F. Orsini, Saclay)
1922     //Carbon fiber of 0.3 mm thick (2 layers) and a central layer of Nomex of 15mm thick.
1923     Float_t dMotherInner =  AliMUONConstants::Rmin(4)-kRframeHeight;
1924     Float_t nomexthickness = 1.5;
1925     Float_t carbonthickness = 0.03;
1926     Float_t supporthlength =  260.;
1927     Float_t supportvlength =  570.;
1928     // Generating the composite shape of the carbon and nomex pannels
1929     new TGeoBBox("shNomexBoxSt5",supporthlength/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
1930     new TGeoBBox("shCarbonBoxSt5",supporthlength/2., supportvlength/2. ,carbonthickness/2.);
1931     new TGeoTubeSeg("shNomexHoleSt5",0., dMotherInner, nomexthickness/2.+carbonthickness+3*kCableWidth+0.001, -90. ,90.);
1932     new TGeoTubeSeg("shCarbonHoleSt5",0., dMotherInner, carbonthickness/2.+0.001, -90. ,90.);
1933     TGeoTranslation* trHoleSt5 = new TGeoTranslation("trHoleSt5",-supporthlength/2.,0.,0.);
1934     trHoleSt5->RegisterYourself();
1935     TGeoCompositeShape* shNomexSupportSt5  = new TGeoCompositeShape("shNomexSupportSt5","shNomexBoxSt5-shNomexHoleSt5:trHoleSt5");
1936     TGeoCompositeShape* shCarbonSupportSt5 = new TGeoCompositeShape("shCarbonSupportSt5","shCarbonBoxSt5-shCarbonHoleSt5:trHoleSt5");
1937
1938    // Generating Nomex and Carbon pannel volumes
1939     TGeoVolume* voNomexSupportSt5  = new TGeoVolume("S09S", shNomexSupportSt5, kMedNomex);
1940     TGeoVolume* voCarbonSupportSt5 = new TGeoVolume("S09K", shCarbonSupportSt5, kMedCarbon);
1941     TGeoTranslation* trCarbon1St5   = new TGeoTranslation("trCarbon1St5",0.,0., -(nomexthickness+carbonthickness)/2.);
1942     TGeoTranslation* trCarbon2St5   = new TGeoTranslation("trCarbon2St5",0.,0.,  (nomexthickness+carbonthickness)/2.);
1943     voNomexSupportSt5->AddNode(voCarbonSupportSt5,1,trCarbon1St5);
1944     voNomexSupportSt5->AddNode(voCarbonSupportSt5,2,trCarbon2St5);
1945
1946     // Add readout cables
1947     gMC->Gsvolu("S09L","BOX",kCableMaterial,dum,0);
1948
1949     ySlat5 = 0.;
1950     Float_t lCableX = 0.;
1951     Float_t lCableY = 0.;
1952     Float_t lCableZ = 0.;
1953     Float_t cablepar[3] = {supporthlength/2., kCableHeight/2., kCableWidth/2.};
1954     Float_t lCableDY = 0.;
1955     for (i = 0; i<kNslats5; i++){
1956       Int_t iCable = 1;
1957       Int_t cIndex = 0;
1958       ySlat5 += kYpos5[i];
1959
1960       lCableY = ySlat5;
1961
1962       // Cables going out from the start of slat
1963       if(kNPCB5[i]>=4){ // Only if 4 or more pcb
1964         // First top cables
1965         cablepar[0] = (supporthlength-kXpos5[i])/2.;
1966         lCableX = kXpos5[i]/2.;
1967         if(i+1>=kNslats5 || i+2>=kNslats5){ // If no more higher slats, then use distance to lower slat
1968           lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
1969         }
1970         else {
1971           lCableDY = (kYpos5[i+1]+kYpos5[i+2])/2.-cablepar[1];
1972         }
1973         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
1974         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1975         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1976         // Then bottom cables
1977         if (i>0) {
1978           if (i==1) { // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
1979             cablepar[0] = (supporthlength-kXpos5[i]-dMotherInner)/2.;
1980             lCableX = (kXpos5[i]+dMotherInner)/2.;
1981             lCableDY = (kYpos5[i]+kYpos5[i])/2.-cablepar[1];
1982           }
1983           else {
1984             lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
1985             if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
1986               lCableDY = lCableY - dMotherInner - cablepar[1];
1987             }
1988           }
1989           gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
1990           gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
1991         }
1992       }
1993
1994       // Rounded slats have an extra cable starting at second pcb
1995       if(i==1){
1996         // Only on top
1997         cablepar[0] = (supporthlength-kPcbLength-kVframeLength)/2.;
1998         lCableX = (kPcbLength+kVframeLength)/2.;
1999         lCableDY = (kYpos5[i+1]+kYpos5[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
2000         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
2001         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
2002         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
2003       }
2004
2005       // Cables going out from the end of the slats
2006       // First top cables
2007       cablepar[0] = (supporthlength-(slatLength5[i]+kXpos5[i]+kDslatLength)+kVframeLength)/2.;
2008       lCableX = slatLength5[i]+kXpos5[i]-kVframeLength+kDslatLength+cablepar[0]-supporthlength/2.;
2009       if(i+1>=kNslats5 || i+2>=kNslats5){ // If no more higher slats, then use distance to lower slat
2010         lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
2011       }
2012       else {
2013         lCableDY = (kYpos5[i+1]+kYpos5[i+2])/2.-cablepar[1];
2014       }
2015       lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
2016       gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
2017       gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
2018       if(i>0){
2019         if (i==1) { // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
2020           lCableDY = (kYpos5[i]+kYpos5[i])/2.-cablepar[1];
2021         }
2022         else {
2023           lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
2024           if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
2025               lCableDY = lCableY - dMotherInner - cablepar[1];
2026           }
2027         }
2028         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
2029         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
2030       }
2031     }
2032
2033     Float_t dzCh9  = dzCh;
2034     TGeoTranslation* trSupport1St5   = new TGeoTranslation("trSupport1St5", supporthlength/2., 0. , dzCh9);
2035     TGeoRotation*    roSupportSt5    = new TGeoRotation("roSupportSt5",90.,180.,-90.);
2036     TGeoCombiTrans*  coSupport2St5   = new TGeoCombiTrans(-supporthlength/2., 0., -dzCh9, roSupportSt5);
2037     GetEnvelopes(13)->AddEnvelope("S09S", 0, 1, *trSupport1St5);
2038     GetEnvelopes(12)->AddEnvelope("S09S", 0, 2, *coSupport2St5);
2039     GetEnvelopes(15)->AddEnvelope("S09S", 0, 3, *trSupport1St5);
2040     GetEnvelopes(14)->AddEnvelope("S09S", 0, 4, *coSupport2St5);
2041
2042
2043     // End of pannel support geometry
2044
2045     // cout << "Geometry for Station 5...... done" << endl;
2046
2047   }
2048
2049   delete [] fStations;
2050
2051 }
2052
2053
2054 //______________________________________________________________________________
2055 void AliMUONSlatGeometryBuilder::SetTransformations()
2056 {
2057 /// Defines the transformations for the station345 chambers.
2058
2059   if (gAlice->GetModule("DIPO")) {
2060     // if DIPO is preset, the whole station will be placed in DDIP volume
2061     SetMotherVolume(4, "DDIP");
2062     SetMotherVolume(5, "DDIP");
2063     SetMotherVolume(6, "DDIP");
2064     SetMotherVolume(7, "DDIP");
2065   }
2066   SetVolume(4, "SC05I", true);
2067   SetVolume(5, "SC05O", true);
2068   SetVolume(6, "SC06I", true);
2069   SetVolume(7, "SC06O", true);
2070
2071   if (gAlice->GetModule("SHIL")) {
2072     SetMotherVolume(8, "YOUT2");
2073     SetMotherVolume(9, "YOUT2");
2074     SetMotherVolume(10, "YOUT2");
2075     SetMotherVolume(11, "YOUT2");
2076     SetMotherVolume(12, "YOUT2");
2077     SetMotherVolume(13, "YOUT2");
2078     SetMotherVolume(14, "YOUT2");
2079     SetMotherVolume(15, "YOUT2");
2080   }
2081
2082   SetVolume( 8, "SC07I", true);
2083   SetVolume( 9, "SC07O", true);
2084   SetVolume(10, "SC08I", true);
2085   SetVolume(11, "SC08O", true);
2086   SetVolume(12, "SC09I", true);
2087   SetVolume(13, "SC09O", true);
2088   SetVolume(14, "SC10I", true);
2089   SetVolume(15, "SC10O", true);
2090
2091 // Stations 345 are not perpendicular to the beam axis
2092 // See AliMUONConstants class
2093   TGeoRotation st345inclination("rot99");
2094   st345inclination.RotateX(AliMUONConstants::St345Inclination());
2095
2096 // The rotation of the half-chamber is done with respect the center of the chamber.
2097 // the distance beween the roation axis and the chamber position is
2098 // AliMUONConstants::DzCh()+AliMUONConstants::DzSlat()
2099 // Therefore the position of the half-chamber has to be corrected by a traslation in Z and Y axis
2100   Double_t deltaY = (AliMUONConstants::DzCh()+AliMUONConstants::DzSlat())*
2101     TMath::Sin(AliMUONConstants::St345Inclination() * TMath::Pi()/180.);
2102   Double_t deltaZ = (AliMUONConstants::DzCh()+AliMUONConstants::DzSlat())*
2103     (1.-TMath::Cos(AliMUONConstants::St345Inclination() * TMath::Pi()/180.));
2104
2105
2106   Double_t zpos1= - AliMUONConstants::DefaultChamberZ(4);
2107   SetTransformation(4, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2108   SetTransformation(5, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2109
2110   zpos1= - AliMUONConstants::DefaultChamberZ(5);
2111   SetTransformation(6, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2112   SetTransformation(7, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2113
2114   zpos1 = - AliMUONConstants::DefaultChamberZ(6);
2115   SetTransformation(8, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2116   SetTransformation(9, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2117
2118   zpos1 = - AliMUONConstants::DefaultChamberZ(7);
2119   SetTransformation(10, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination );
2120   SetTransformation(11, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination );
2121
2122   zpos1 = - AliMUONConstants::DefaultChamberZ(8);
2123   SetTransformation(12, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2124   SetTransformation(13, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2125
2126   zpos1 = - AliMUONConstants::DefaultChamberZ(9);
2127   SetTransformation(14, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2128   SetTransformation(15, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2129
2130 }
2131
2132 //______________________________________________________________________________
2133 void AliMUONSlatGeometryBuilder::SetSensitiveVolumes()
2134 {
2135 /// Defines the sensitive volumes for slat stations chambers.
2136
2137   GetGeometry( 4)->SetSensitiveVolume("S05G");
2138   GetGeometry( 4)->SetSensitiveVolume("SC5G");
2139   GetGeometry( 4)->SetSensitiveVolume("SD5G");
2140   GetGeometry( 5)->SetSensitiveVolume("S05G");
2141   GetGeometry( 5)->SetSensitiveVolume("SC5G");
2142   GetGeometry( 5)->SetSensitiveVolume("SD5G");
2143   GetGeometry( 6)->SetSensitiveVolume("S06G");
2144   GetGeometry( 6)->SetSensitiveVolume("SC6G");
2145   GetGeometry( 6)->SetSensitiveVolume("SD6G");
2146   GetGeometry( 7)->SetSensitiveVolume("S06G");
2147   GetGeometry( 7)->SetSensitiveVolume("SC6G");
2148   GetGeometry( 7)->SetSensitiveVolume("SD6G");
2149   GetGeometry( 8)->SetSensitiveVolume("S07G");
2150   GetGeometry( 8)->SetSensitiveVolume("SD7G");
2151   GetGeometry( 9)->SetSensitiveVolume("S07G");
2152   GetGeometry( 9)->SetSensitiveVolume("SD7G");
2153   GetGeometry(10)->SetSensitiveVolume("S08G");
2154   GetGeometry(10)->SetSensitiveVolume("SD8G");
2155   GetGeometry(11)->SetSensitiveVolume("S08G");
2156   GetGeometry(11)->SetSensitiveVolume("SD8G");
2157   GetGeometry(12)->SetSensitiveVolume("S09G");
2158   GetGeometry(12)->SetSensitiveVolume("SD9G");
2159   GetGeometry(13)->SetSensitiveVolume("S09G");
2160   GetGeometry(13)->SetSensitiveVolume("SD9G");
2161   GetGeometry(14)->SetSensitiveVolume("S10G");
2162   GetGeometry(14)->SetSensitiveVolume("SD0G");
2163   GetGeometry(15)->SetSensitiveVolume("S10G");
2164   GetGeometry(15)->SetSensitiveVolume("SD0G");
2165 }
2166
2167 //______________________________________________________________________________
2168 Int_t  AliMUONSlatGeometryBuilder::ConvertSlatNum(Int_t numslat, Int_t quadnum, Int_t fspq) const
2169 {
2170 /// On-line function establishing the correspondance between numslat (the slat number on a particular quadrant (numslat->0....4 for St3))
2171 /// and slatnum (the slat number on the whole panel (slatnum->1...18 for St3)
2172   numslat += 1;
2173   if (quadnum==2 || quadnum==3)
2174     numslat += fspq;
2175   else
2176     numslat = fspq + 2-numslat;
2177   numslat -= 1;
2178
2179   if (quadnum==3 || quadnum==4) numslat += 2*fspq+1;
2180
2181   return numslat;
2182 }