MUON/AliMUONSlatGeometryBuilder.cxx

   1 /**************************************************************************
   2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
   3  *                                                                        *
   4  * Author: The ALICE Off-line Project.                                    *
   5  * Contributors are mentioned in the code where appropriate.              *
   6  *                                                                        *
   7  * Permission to use, copy, modify and distribute this software and its   *
   8  * documentation strictly for non-commercial purposes is hereby granted   *
   9  * without fee, provided that the above copyright notice appears in all   *
  10  * copies and that both the copyright notice and this permission notice   *
  11  * appear in the supporting documentation. The authors make no claims     *
  12  * about the suitability of this software for any purpose. It is          *
  13  * provided "as is" without express or implied warranty.                  *
  14  **************************************************************************/
  15
  16 // $Id$
  17 //
  18
  19 //-----------------------------------------------------------------------------
  20 /// \class AliMUONSlatGeometryBuilder
  21 /// This Builder is designed according to the enveloppe methode. The basic idea is to be able to allow moves
  22 /// of the slats on the support panels.
  23 /// Those moves can be described with a simple set of parameters. The next step should be now to describe all
  24 /// the slats and their places by a unique
  25 /// class, which would make the SlatBuilder far more compact since now only three parameters can define a slat
  26 /// and its position, like:
  27 ///   - Bool_t rounded_shape_slat
  28 ///   - Float_t slat_length
  29 ///   - Float_t slat_number or Float_t slat_position
  30 /// Reference system is the one described in the note ALICE-INT-2003-038  v.2  EDMS Id 406391
  31 ///
  32 /// \author Eric Dumonteil (dumontei@cea.fr)
  33 //-----------------------------------------------------------------------------
  34
  35 #include "AliMUONSlatGeometryBuilder.h"
  36 #include "AliMUON.h"
  37 #include "AliMUONConstants.h"
  38 #include "AliMUONGeometryModule.h"
  39 #include "AliMUONGeometryEnvelopeStore.h"
  40 #include "AliMUONConstants.h"
  41
  42 #include "AliMpDEManager.h"
  43
  44 #include "AliRun.h"
  45 #include "AliLog.h"
  46
  47 #include <TVirtualMC.h>
  48 #include <TGeoBBox.h>
  49 #include <TGeoVolume.h>
  50 #include <TGeoManager.h>
  51 #include <TGeoMatrix.h>
  52 #include <TGeoCompositeShape.h>
  53 #include <TGeoTube.h>
  54 #include <Riostream.h>
  55
  56 /// \cond CLASSIMP
  57 ClassImp(AliMUONSlatGeometryBuilder)
  58 /// \endcond
  59
  60 //______________________________________________________________________________
  61 AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(AliMUON* muon)
  62  : AliMUONVGeometryBuilder(4, 12),
  63    fMUON(muon)
  64 {
  65 /// Standard constructor
  66
  67 }
  68
  69 //______________________________________________________________________________
  70 AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder()
  71  : AliMUONVGeometryBuilder(),
  72    fMUON(0)
  73 {
  74 /// Default constructor
  75 }
  76
  77 //______________________________________________________________________________
  78 AliMUONSlatGeometryBuilder::~AliMUONSlatGeometryBuilder()
  79 {
  80 /// Destructor
  81 }
  82
  83 //
  84 // public methods
  85 //
  86
  87 //______________________________________________________________________________
  88 void AliMUONSlatGeometryBuilder::CreateGeometry()
  89 {
  90   /// CreateGeometry is the method containing all the informations concerning Stations 345 geometry.
  91   /// It includes description and placements of support panels and slats.
  92   /// The code comes directly from what was written in AliMUONv1.cxx before, with modifications concerning
  93   /// the use of Enveloppe method to place the Geant volumes.
  94   /// Now, few changes would allow the creation of a Slat methode where slat could be described by few parameters,
  95   /// and this builder would then be dedicated only to the
  96   /// placements of the slats. Those modifications could shorten the Station 345 geometry by a non-negligeable factor...
  97
  98   Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099;
  99
 100   Float_t angle;
 101   Float_t *dum=0;
 102
 103   // define the id of tracking media:
 104   //  Int_t idAir    = idtmed[1100]; // medium 1
 105   Int_t idGas    = idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%)
 106   Int_t idCopper = idtmed[1110];
 107   Int_t idG10    = idtmed[1111];
 108   Int_t idCarbon = idtmed[1112];
 109   Int_t idRoha   = idtmed[1113];
 110   Int_t idNomex  = idtmed[1114]; // honey comb
 111   Int_t idNoryl  = idtmed[1115];
 112   Int_t idNomexB = idtmed[1116]; // bulk material
 113
 114   // Getting mediums for pannel support geometry
 115   TGeoMedium* kMedNomex     = gGeoManager->GetMedium("MUON_Nomex");
 116   TGeoMedium* kMedCarbon    = gGeoManager->GetMedium("MUON_CARBON");
 117
 118   // sensitive area: 40*40 cm**2
 119   const Float_t kSensLength = 40.;
 120   const Float_t kSensHeight = 40.;
 121   const Float_t kSensWidth  = AliMUONConstants::Pitch()*2;// 0.5 cm, according to TDR fig 2.120
 122   const Int_t kSensMaterial = idGas;
 123   //     const Float_t kYoverlap   = 1.5;
 124
 125   // PCB dimensions in cm; width: 30 mum copper
 126   const Float_t kPcbLength  = kSensLength;
 127   const Float_t kPcbHeight  = 58.; // updated Ch. Finck
 128   const Float_t kPcbWidth   = 0.003;
 129   const Int_t kPcbMaterial  = idCopper;
 130
 131   // Insulating material: 220 mum G10 fiber  glued to pcb
 132   const Float_t kInsuLength = kPcbLength;
 133   const Float_t kInsuHeight = kPcbHeight;
 134   const Float_t kInsuWidth  = 0.022;  // updated Ch. Finck
 135   const Int_t kInsuMaterial = idG10;
 136
 137   // Carbon fiber panels: 200mum carbon/epoxy skin
 138   const Float_t kCarbonWidth  = 0.020;
 139   const Int_t kCarbonMaterial = idCarbon;
 140
 141   // Nomex (honey comb) between the two panel carbon skins
 142   const Float_t kNomexLength = kSensLength;
 143   const Float_t kNomexHeight = kSensHeight;
 144   const Float_t kNomexWidth  = 0.8; // updated Ch. Finck
 145   const Int_t kNomexMaterial = idNomex;
 146
 147   // Bulk Nomex under panel sandwich Ch. Finck
 148   const Float_t kNomexBWidth  = 0.025;
 149   const Int_t kNomexBMaterial = idNomexB;
 150
 151   // Panel sandwich 0.02 carbon*2 + 0.8 nomex
 152   const Float_t kPanelLength = kSensLength;
 153   const Float_t kPanelHeight = kSensHeight;
 154   const Float_t kPanelWidth  = 2 * kCarbonWidth + kNomexWidth;
 155
 156   // Frame along the rounded (spacers) slats
 157   const Float_t kRframeHeight = 2.00;
 158
 159   // spacer around the slat: 2 sticks along length,2 along height
 160   // H: the horizontal ones
 161   const Float_t kHframeLength = kPcbLength;
 162   const Float_t kHframeHeight = 1.95; // updated Ch. Finck
 163   const Float_t kHframeWidth  = kSensWidth;
 164   const Int_t kHframeMaterial = idNoryl;
 165
 166   // V: the vertical ones; vertical spacers
 167   const Float_t kVframeLength = 2.5;
 168   const Float_t kVframeHeight = kSensHeight + kHframeHeight;
 169   const Float_t kVframeWidth  = kSensWidth;
 170   const Int_t kVframeMaterial = idNoryl;
 171
 172   // R: rounded part of vertical spacers
 173   const Float_t kRframeLength = 2.0;
 174   const Float_t kRframeWidth  = kSensWidth;
 175   const Int_t kRframeMaterial = idNoryl;
 176
 177   // B: the horizontal border filled with rohacell: ok Ch. Finck
 178   const Float_t kBframeLength = kHframeLength;
 179   const Float_t kBframeHeight = (kPcbHeight - kSensHeight)/2. - kHframeHeight;
 180   const Float_t kBframeWidth  = kHframeWidth;
 181   const Int_t kBframeMaterial = idRoha;
 182
 183   // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper) for electronics
 184   const Float_t kNulocLength   = 2.5;
 185   const Float_t kNulocHeight   = kBframeHeight;
 186   const Float_t kNulocWidth    = 0.0030 + 0.0014; // equivalent copper width of vetronite;
 187   const Int_t   kNulocMaterial = idCopper;
 188
 189   // Readout cables: Equivalent to 260 mum copper
 190   const Float_t kCableHeight = 2.6;
 191   const Float_t kCableWidth  = 0.026;
 192   const Int_t kCableMaterial = idCopper;
 193
 194   // Slat parameters
 195   const Float_t kSlatHeight = kPcbHeight;
 196   const Float_t kSlatWidth  = kSensWidth + 2.*(kPcbWidth + kInsuWidth + kPanelWidth
 197                                                + kNomexBWidth); //replaced rohacell with Nomex Ch. Finck
 198   // const Int_t   kSlatMaterial = idAir;
 199   const Float_t kDslatLength  = -1.25; // position of the slat respect to the beam plane (half vertical spacer) Ch. Finck
 200   Float_t zSlat               = AliMUONConstants::DzSlat();// implemented Ch. Finck
 201   Float_t dzCh                = AliMUONConstants::DzCh();
 202
 203   Float_t spar[3];
 204   Int_t i, j;
 205   Int_t detElemId;
 206   Int_t moduleId;
 207
 208   // the panel volume contains the nomex
 209   Float_t panelpar[3] = { kPanelLength/2., kPanelHeight/2., kPanelWidth/2. };
 210   Float_t nomexpar[3] = { kNomexLength/2., kNomexHeight/2., kNomexWidth/2. };
 211   Float_t twidth =  kPanelWidth +  kNomexBWidth;
 212   Float_t nomexbpar[3] = {kNomexLength/2., kNomexHeight/2.,twidth/2. };// bulk nomex
 213
 214   // insulating material contains PCB-> gas
 215   twidth = 2*(kInsuWidth + kPcbWidth) + kSensWidth ;
 216   Float_t insupar[3] = {kInsuLength/2., kInsuHeight/2., twidth/2. };
 217   twidth -= 2 * kInsuWidth;
 218   Float_t pcbpar[3]  = {kPcbLength/2., kPcbHeight/2., twidth/2. };
 219   Float_t senspar[3] = {kSensLength/2., kSensHeight/2., kSensWidth/2. };
 220   Float_t theight    = 2 * kHframeHeight + kSensHeight;
 221   Float_t hFramepar[3] = {kHframeLength/2., theight/2., kHframeWidth/2.};
 222   Float_t bFramepar[3] = {kBframeLength/2., kBframeHeight/2., kBframeWidth/2.};
 223   Float_t vFramepar[3] = {kVframeLength/2., kVframeHeight/2., kVframeWidth/2.};
 224   Float_t nulocpar[3]  = {kNulocLength/2.,  kNulocHeight/2.,  kNulocWidth/2.};
 225
 226   Float_t xx;
 227   Float_t xxmax = (kBframeLength - kNulocLength)/2.;
 228   Int_t index=0;
 229   Int_t* fStations = new Int_t[5];
 230   for (Int_t i=0; i<5; i++) fStations[i] = 1;
 231   fStations[2] = 1;
 232
 233   if (fStations[2])
 234     {
 235       //********************************************************************
 236       //                            Station 3                             **
 237       //********************************************************************
 238       // Mother volume for each chamber in St3 is an envelop (or assembly)
 239       // There is one assembly mother per half a chamber
 240       // Mother volume for each chamber in St3 is an envelop (or assembly)
 241       // There is one assembly mother per half a chamber  called SC05I, SC05O, SC06I and SC06O
 242       // volumes for slat geometry (xx=5,..,10 chamber id):
 243       // Sxx0 Sxx1 Sxx2 Sxx3  -->   Slat Mother volumes
 244       // SxxG                          -->   Sensitive volume (gas)
 245       // SxxP                          -->   PCB (copper)
 246       // SxxI                          -->   Insulator (G10)
 247       // SxxC                          -->   Carbon panel
 248       // SxxN                          -->   Nomex comb
 249       // SxxX                          -->   Nomex bulk
 250       // SxxH, SxxV                    -->   Horizontal and Vertical frames (Noryl)
 251       // SB5x                          -->   Volumes for the 35 cm long PCB
 252       // slat dimensions: slat is a MOTHER volume!!! made of air
 253       // Only for chamber 5: slat 1 has a PCB shorter by 5cm!
 254
 255       Float_t tlength = 35.;
 256       Float_t panelpar2[3]  = { tlength/2., panelpar[1],  panelpar[2]};
 257       Float_t nomexpar2[3]  = { tlength/2., nomexpar[1],  nomexpar[2]};
 258       Float_t nomexbpar2[3] = { tlength/2., nomexbpar[1],  nomexbpar[2]};
 259       Float_t insupar2[3]   = { tlength/2., insupar[1],   insupar[2]};
 260       Float_t pcbpar2[3]    = { tlength/2., pcbpar[1],    pcbpar[2]};
 261       Float_t senspar2[3]   = { tlength/2., senspar[1],   senspar[2]};
 262       Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]};
 263       Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]};
 264       Float_t *dum=0;
 265       Float_t pcbDLength3   = (kPcbLength - tlength);
 266
 267       // For rounded pcb of central slat
 268       Float_t csvPcbLength = 59.25-40.; // PQ-LAT-SR1
 269       Float_t panelpar3[3]  = { csvPcbLength/2., panelpar[1],  panelpar[2]};
 270       Float_t nomexpar3[3]  = { csvPcbLength/2., nomexpar[1],  nomexpar[2]};
 271       Float_t nomexbpar3[3] = { csvPcbLength/2., nomexbpar[1],  nomexbpar[2]};
 272       Float_t insupar3[3]   = { csvPcbLength/2., insupar[1],   insupar[2]};
 273       Float_t pcbpar3[3]    = { csvPcbLength/2., pcbpar[1],    pcbpar[2]};
 274       Float_t senspar3[3]   = { csvPcbLength/2., senspar[1],   senspar[2]};
 275       Float_t hFramepar3[3] = { csvPcbLength/2., hFramepar[1], hFramepar[2]};
 276       Float_t bFramepar3[3] = { csvPcbLength/2., bFramepar[1], bFramepar[2]};
 277       Float_t cPhi = TMath::RadToDeg()*(TMath::Pi()/2.-TMath::ACos(hFramepar3[1]/(AliMUONConstants::Rmin(2)-kRframeLength)));
 278       Float_t cFramepar3[5] = { AliMUONConstants::Rmin(2)-kRframeLength, AliMUONConstants::Rmin(2), kRframeWidth, -cPhi, cPhi};
 279
 280       const Int_t   kNslats3         = 5;  // number of slats per quadrant
 281       const Int_t   kNPCB3[kNslats3] = {4, 4, 4, 3, 2}; // n PCB per slat
 282       const Float_t kXpos3[kNslats3] = {0., 0., 0., 0., 0.};//{31., 0., 0., 0., 0.};
 283       const Float_t kYpos3[kNslats3] = {0, 37.8, 37.7, 37.3, 33.7};
 284       Float_t slatLength3[kNslats3];
 285
 286       Float_t rPhi1 = TMath::RadToDeg()*(TMath::ASin((kYpos3[1]-hFramepar3[1])/(AliMUONConstants::Rmin(2))));
 287       Float_t rPhi2 = TMath::RadToDeg()*(TMath::ACos(-vFramepar[0]/(AliMUONConstants::Rmin(2)-kRframeLength)));
 288       Float_t rFramepar3[5] = { AliMUONConstants::Rmin(2)-kRframeLength, AliMUONConstants::Rmin(2), kRframeWidth, rPhi1, rPhi2};
 289       Float_t vrFrameHeight = hFramepar3[1]+kYpos3[1]-AliMUONConstants::Rmin(2)+kRframeLength;
 290
 291       // create and position the slat (mother) volumes
 292
 293       char idSlatCh5[5];
 294       char idSlatCh6[5];
 295       Float_t xSlat3;
 296       Float_t ySlat3 = 0;
 297       Float_t angle = 0.;
 298       Float_t spar2[3];
 299       for (i = 0; i < kNslats3; i++){
 300
 301         slatLength3[i] = kPcbLength * kNPCB3[i] + 2.* kVframeLength;
 302         xSlat3 = slatLength3[i]/2. +  kDslatLength + kXpos3[i];
 303         ySlat3 += kYpos3[i];
 304
 305         spar[0] = slatLength3[i]/2.;
 306         spar[1] = kSlatHeight/2.;
 307         spar[2] = kSlatWidth/2.;
 308         // take away 5 cm from the first slat in chamber 5
 309         if (i == 0 || i == 1 || i == 2) { // 1 pcb is shortened by 5cm
 310           spar2[0] = spar[0] - pcbDLength3/2.;
 311         } else {
 312           spar2[0] = spar[0];
 313         }
 314         spar2[1] = spar[1];
 315         spar2[2] = spar[2];
 316         Float_t dzCh3 = dzCh;
 317         Float_t zSlat3 = (i%2 ==0)? -zSlat : zSlat; // seems not that zSlat3 = zSlat4 & 5 refering to plan PQ7EN345-6 ?
 318
 319         sprintf(idSlatCh5,"LA%d",i+kNslats3-1);
 320         detElemId = 509 - (i + kNslats3-1-4);
 321         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 322         if (detElemId % 2 == 0)
 323             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 324                                                 TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
 325         else
 326             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 327                                                 TGeoRotation("rot1",90,angle,90,270+angle,180,0) );
 328
 329         sprintf(idSlatCh5,"LA%d",3*kNslats3-2+i);
 330         detElemId = 500 + (i + kNslats3-1-4);
 331         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 332         if (detElemId % 2 == 0)
 333             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 334                                                 TGeoRotation("rot2",90,180+angle,90,270+angle,0,0) );
 335         else
 336             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 337                                                 TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
 338
 339         if (i > 0) {
 340           sprintf(idSlatCh5,"LA%d",kNslats3-1-i);
 341           detElemId = 509 + (i + kNslats3-1-4);
 342           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 343           if (detElemId % 2 == 0 && detElemId != 510)
 344               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 345                                                   TGeoRotation("rot3",90,angle,90,90+angle,0,0) );
 346           else
 347               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 348                                                   TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
 349
 350           sprintf(idSlatCh5,"LA%d",3*kNslats3-2-i);
 351           detElemId = 518 - (i + kNslats3-1-4);
 352           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 353           if (detElemId % 2 == 1 && detElemId != 517)
 354               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 355                                                   TGeoRotation("rot4",90,180+angle,90,90+angle,180,0) );
 356           else
 357               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 358                                                   TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) );
 359         }
 360
 361         sprintf(idSlatCh6,"LB%d",kNslats3-1+i);
 362         detElemId = 609 - (i  + kNslats3-1-4);
 363         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 364         if (detElemId % 2 == 0)
 365             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 366                                      TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
 367         else
 368             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 369                                      TGeoRotation("rot5",90,angle,90,270+angle,180,0) );
 370
 371         sprintf(idSlatCh6,"LB%d",3*kNslats3-2+i);
 372         detElemId = 600 + (i + kNslats3-1-4);
 373         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 374         if (detElemId % 2 == 0)
 375             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 376                                                 TGeoRotation("rot6",90,180+angle,90,270+angle,0,0) );
 377         else
 378             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 379                                                 TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
 380
 381         if (i > 0) {
 382           sprintf(idSlatCh6,"LB%d",kNslats3-1-i);
 383           detElemId = 609 + (i + kNslats3-1-4);
 384           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 385           if (detElemId % 2 == 0 && detElemId != 610)
 386               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 387                                                   TGeoRotation("rot7",90,angle,90,90+angle,0,0) );
 388           else
 389               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 390                                                   TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
 391           sprintf(idSlatCh6,"LB%d",3*kNslats3-2-i);
 392           detElemId = 618 - (i + kNslats3-1-4);
 393           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 394           if (detElemId % 2 == 1 && detElemId != 617)
 395               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 396                                                   TGeoRotation("rot8",90,180+angle,90,90+angle,180,0) );
 397           else
 398               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 399                                                   TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
 400         }
 401       }
 402
 403       // create the panel volume
 404
 405       gMC->Gsvolu("S05C","BOX",kCarbonMaterial,panelpar,3);
 406       gMC->Gsvolu("SB5C","BOX",kCarbonMaterial,panelpar2,3);
 407       gMC->Gsvolu("SC5C","BOX",kCarbonMaterial,panelpar3,3);
 408       gMC->Gsvolu("SD5C","BOX",kCarbonMaterial,panelpar,3);
 409       gMC->Gsvolu("S06C","BOX",kCarbonMaterial,panelpar,3);
 410       gMC->Gsvolu("SC6C","BOX",kCarbonMaterial,panelpar3,3);
 411       gMC->Gsvolu("SD6C","BOX",kCarbonMaterial,panelpar,3);
 412
 413       // create the nomex volume (honey comb)
 414
 415       gMC->Gsvolu("S05N","BOX",kNomexMaterial,nomexpar,3);
 416       gMC->Gsvolu("SB5N","BOX",kNomexMaterial,nomexpar2,3);
 417       gMC->Gsvolu("SC5N","BOX",kNomexMaterial,nomexpar3,3);
 418       gMC->Gsvolu("SD5N","BOX",kNomexMaterial,nomexpar,3);
 419       gMC->Gsvolu("S06N","BOX",kNomexMaterial,nomexpar,3);
 420       gMC->Gsvolu("SC6N","BOX",kNomexMaterial,nomexpar3,3);
 421       gMC->Gsvolu("SD6N","BOX",kNomexMaterial,nomexpar,3);
 422
 423       // create the nomex volume (bulk)
 424
 425       gMC->Gsvolu("S05X","BOX",kNomexBMaterial,nomexbpar,3);
 426       gMC->Gsvolu("SB5X","BOX",kNomexBMaterial,nomexbpar2,3);
 427       gMC->Gsvolu("SC5X","BOX",kNomexBMaterial,nomexbpar3,3);
 428       gMC->Gsvolu("SD5X","BOX",kNomexBMaterial,nomexbpar,3);
 429       gMC->Gsvolu("S06X","BOX",kNomexBMaterial,nomexbpar,3);
 430       gMC->Gsvolu("SC6X","BOX",kNomexBMaterial,nomexbpar3,3);
 431       gMC->Gsvolu("SD6X","BOX",kNomexBMaterial,nomexbpar,3);
 432
 433       // create the insulating material volume
 434
 435       gMC->Gsvolu("S05I","BOX",kInsuMaterial,insupar,3);
 436       gMC->Gsvolu("SB5I","BOX",kInsuMaterial,insupar2,3);
 437       gMC->Gsvolu("SC5I","BOX",kInsuMaterial,insupar3,3);
 438       gMC->Gsvolu("SD5I","BOX",kInsuMaterial,insupar,3);
 439       gMC->Gsvolu("S06I","BOX",kInsuMaterial,insupar,3);
 440       gMC->Gsvolu("SC6I","BOX",kInsuMaterial,insupar3,3);
 441       gMC->Gsvolu("SD6I","BOX",kInsuMaterial,insupar,3);
 442
 443       // create the PCB volume
 444
 445       gMC->Gsvolu("S05P","BOX",kPcbMaterial,pcbpar,3);
 446       gMC->Gsvolu("SB5P","BOX",kPcbMaterial,pcbpar2,3);
 447       gMC->Gsvolu("SC5P","BOX",kPcbMaterial,pcbpar3,3);
 448       gMC->Gsvolu("SD5P","BOX",kPcbMaterial,pcbpar,3);
 449       gMC->Gsvolu("S06P","BOX",kPcbMaterial,pcbpar,3);
 450       gMC->Gsvolu("SC6P","BOX",kPcbMaterial,pcbpar3,3);
 451       gMC->Gsvolu("SD6P","BOX",kPcbMaterial,pcbpar,3);
 452
 453       // create the sensitive volumes,
 454
 455       gMC->Gsvolu("S05G","BOX",kSensMaterial,dum,0);
 456       gMC->Gsvolu("SC5G","BOX",kSensMaterial,senspar3,3);
 457       gMC->Gsvolu("SD5G","BOX",kSensMaterial,senspar,3);
 458       gMC->Gsvolu("S06G","BOX",kSensMaterial,dum,0);
 459       gMC->Gsvolu("SC6G","BOX",kSensMaterial,senspar3,3);
 460       gMC->Gsvolu("SD6G","BOX",kSensMaterial,senspar,3);
 461
 462       // create the vertical frame volume
 463
 464       gMC->Gsvolu("S05V","BOX",kVframeMaterial,vFramepar,3);
 465       gMC->Gsvolu("S06V","BOX",kVframeMaterial,vFramepar,3);
 466
 467       // create the rounded vertical frame volume
 468
 469       gMC->Gsvolu("SC5D","TUBS",kRframeMaterial,cFramepar3,5);
 470       gMC->Gsvolu("SD5D","TUBS",kRframeMaterial,rFramepar3,5);
 471       gMC->Gsvolu("SC6D","TUBS",kRframeMaterial,cFramepar3,5);
 472       gMC->Gsvolu("SD6D","TUBS",kRframeMaterial,rFramepar3,5);
 473
 474       // create the horizontal frame volume
 475
 476       gMC->Gsvolu("S05H","BOX",kHframeMaterial,hFramepar,3);
 477       gMC->Gsvolu("SB5H","BOX",kHframeMaterial,hFramepar2,3);
 478       gMC->Gsvolu("SC5H","BOX",kHframeMaterial,hFramepar3,3);
 479       gMC->Gsvolu("SD5H","BOX",kHframeMaterial,hFramepar,3);
 480       gMC->Gsvolu("S06H","BOX",kHframeMaterial,hFramepar,3);
 481       gMC->Gsvolu("SC6H","BOX",kHframeMaterial,hFramepar3,3);
 482       gMC->Gsvolu("SD6H","BOX",kHframeMaterial,hFramepar,3);
 483
 484       // create the horizontal border volume
 485
 486       gMC->Gsvolu("S05B","BOX",kBframeMaterial,bFramepar,3);
 487       gMC->Gsvolu("SB5B","BOX",kBframeMaterial,bFramepar2,3);
 488       gMC->Gsvolu("SC5B","BOX",kBframeMaterial,bFramepar3,3);
 489       gMC->Gsvolu("SD5B","BOX",kBframeMaterial,bFramepar,3);
 490       gMC->Gsvolu("S06B","BOX",kBframeMaterial,bFramepar,3);
 491       gMC->Gsvolu("SC6B","BOX",kBframeMaterial,bFramepar3,3);
 492       gMC->Gsvolu("SD6B","BOX",kBframeMaterial,bFramepar,3);
 493
 494       // Replace the volume shape with a composite shape
 495       // with substracted overlap with beam shield
 496       if ( gMC->IsRootGeometrySupported() ) {
 497
 498         // Get shape
 499         Int_t nSlatType = 2;
 500         Int_t nVol = 8;
 501         char slatType[3] = "CD"; // C: central slat; D: rounded slat
 502         char volLetter[9] = "CNXIPHBG";
 503         char volName[5] = "SC5C";
 504         char compName[11] = "SC5C";
 505         char csName[14] = "centerSlatC5C";
 506         TGeoVolume *mVol = 0x0;
 507         TObjArray centerSlat(nSlatType*((nVol+1)*2));
 508         TObjArray composite(nSlatType*((nVol+1)*2));
 509
 510
 511         // Beam shield recess
 512         new TGeoTube("tubeCut", 0., AliMUONConstants::Rmin(2), kSlatWidth/2.+0.001);
 513         // Displacement
 514         TGeoTranslation* trCTube = new TGeoTranslation("trCTube", -(kPcbLength-csvPcbLength/2.+kVframeLength/2.), 0., 0.);
 515         trCTube->RegisterYourself();
 516         TGeoTranslation* trDTube = new TGeoTranslation("trDTube", -(kPcbLength+kVframeLength)/2., -kYpos3[1], 0.);
 517         trDTube->RegisterYourself();
 518
 519         Float_t cPhi2 = (TMath::Pi()/2.-TMath::ACos((kSensHeight/2.)/(AliMUONConstants::Rmin(2)-kRframeLength)));
 520         TGeoBBox *boxCCut = new TGeoBBox("boxCCut",(cFramepar3[1]-cFramepar3[0]*TMath::Cos(cPhi2))/2., hFramepar3[1], cFramepar3[2]+0.001);
 521         // Displacement
 522         TGeoTranslation* trCBox = new TGeoTranslation("trCBox",cFramepar3[0]*TMath::Cos(cPhi2)+boxCCut->GetDX(), 0., 0.);
 523         trCBox->RegisterYourself();
 524         new TGeoBBox("boxDCut",(kPcbLength+kVframeLength)/2., hFramepar3[1], vFramepar[2]+0.001);
 525         // Displacement
 526         TGeoTranslation* trDBox = new TGeoTranslation("trDBox",kPcbLength/2., kYpos3[1], 0.);
 527         trDBox->RegisterYourself();
 528
 529         TGeoBBox *boxVframe = new TGeoBBox("boxVframe",vFramepar[0],vrFrameHeight/2., vFramepar[2]);
 530         TGeoTranslation* trVBox = new TGeoTranslation("trVBox", 0., AliMUONConstants::Rmin(2)-kRframeLength + boxVframe->GetDY(), 0.);
 531         trVBox->RegisterYourself();
 532
 533         for(int iCh=5; iCh<=6; iCh++){
 534           for (int iSlatType = 0; iSlatType<nSlatType; iSlatType++) {
 535             for (int iVol = 0; iVol<nVol; iVol++){
 536               Int_t lIndex = (iCh-5)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+iVol;
 537               sprintf(volName,"S%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
 538               mVol = gGeoManager->FindVolumeFast(volName);
 539               if ( !mVol ) {
 540                 AliErrorStream()
 541                   << "Slat volume " << volName << " not found" << endl;
 542               }
 543               else {
 544                 centerSlat[lIndex] = mVol->GetShape();
 545                 sprintf(csName,"centerSlat%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
 546                 ((TGeoShape*)centerSlat[lIndex])->SetName(csName);
 547
 548                 // Composite shape
 549                 TString compOperation(csName);
 550                 compOperation+="-tubeCut:tr";
 551                 compOperation+=slatType[iSlatType];
 552                 compOperation+="Tube";
 553                 if (strstr(volName,"B")){
 554                   // Displacement
 555                   TGeoTranslation* trB = new TGeoTranslation("trB", 0., -( kPcbHeight - kBframeHeight ) / 2., 0.);
 556                   trB->RegisterYourself();
 557                   compOperation.ReplaceAll("-tubeCut",":trB-tubeCut");
 558                 }
 559                 sprintf(compName,"composite%d%c",iCh,volLetter[iVol]);
 560                 composite[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
 561
 562                 // Reset shape to volume
 563                 mVol->SetShape((TGeoShape*)composite[lIndex]);
 564               }
 565             }
 566
 567             // For rounded spacer
 568             Int_t lIndex = (iCh-5)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+nVol;
 569             sprintf(volName,"S%c%dD",slatType[iSlatType],iCh);
 570             mVol = gGeoManager->FindVolumeFast(volName);
 571             if ( !mVol ) {
 572               AliErrorStream()
 573                 << "Slat volume " << volName << " not found" << endl;
 574             }
 575             else {
 576               centerSlat[lIndex] = mVol->GetShape();
 577               sprintf(csName,"centerSlat%c%dD",slatType[iSlatType],iCh);
 578               ((TGeoShape*)centerSlat[lIndex])->SetName(csName);
 579
 580               // Composite shape
 581               TString compOperation(csName);
 582               if (strstr(volName,"SC")){
 583                 compOperation+="*boxCCut:trCBox";
 584               }
 585               if (strstr(volName,"SD")){
 586                 compOperation.Prepend("(");
 587                 compOperation+="+boxVframe:trVBox)*boxDCut:trDBox";
 588               }
 589               sprintf(compName,"composite%c%dD",slatType[iSlatType],iCh);
 590               composite[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
 591               // Reset shape to volume
 592               mVol->SetShape((TGeoShape*)composite[lIndex]);
 593             }
 594           }
 595         }
 596       }
 597
 598       index = 0;
 599       for (i = 0; i<kNslats3; i++){
 600         for (Int_t quadrant = 1; quadrant <= 4; quadrant++) {
 601
 602           if (i == 0 && quadrant == 2) continue;
 603           if (i == 0 && quadrant == 4) continue;
 604
 605           sprintf(idSlatCh5,"LA%d",ConvertSlatNum(i,quadrant,kNslats3-1));
 606           sprintf(idSlatCh6,"LB%d",ConvertSlatNum(i,quadrant,kNslats3-1));
 607           Int_t moduleSlatCh5 = GetModuleId(idSlatCh5);
 608           Int_t moduleSlatCh6 = GetModuleId(idSlatCh6);
 609           Float_t xvFrame  = (slatLength3[i] - kVframeLength)/2.;
 610           Float_t xvFrame2  = xvFrame;
 611
 612           if (i == 0 || i == 1 || i == 2) xvFrame2 -= pcbDLength3; // Correct position (J.C.)
 613
 614           // position the vertical frames
 615           if ( i > 2) {
 616             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 617                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 618             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 619                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 620             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 621                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 622             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 623                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 624           }
 625
 626           if (i == 2) {
 627             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 628                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.));
 629             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 630                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 631             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 632                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 633             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 634                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 635           }
 636
 637           if (i == 0 || i == 1) { // first vertical spacers
 638             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 639                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.));
 640             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 641                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 642             if (i == 0) { // rounded spacer for central slat (J.C.)
 643               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5D", idSlatCh5,
 644                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 645               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6D", idSlatCh6,
 646                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 647
 648             }
 649             if (i == 1) { // rounded + vertical spacer for rounded slat (J.C.)
 650               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5D", idSlatCh5,
 651                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos3[1],0.));
 652               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6D", idSlatCh6,
 653                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos3[1],0.));
 654             }
 655           }
 656
 657           // position the panels and the insulating material
 658           for (j = 0; j < kNPCB3[i]; j++){
 659             index++;
 660             Float_t xx = kSensLength * (-kNPCB3[i]/2. + j + 0.5);
 661             Float_t xx2 = xx - pcbDLength3/2.;
 662             Float_t xx3 = xx + (kSensLength-csvPcbLength)/2.;
 663
 664             Float_t zPanel = spar[2] - nomexbpar[2];
 665
 666             if (i==0 && j==0){ // Rounded pcb of central slat (SR1, NR1)
 667               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5X", idSlatCh5, 2*index-1,TGeoTranslation(xx3,0.,zPanel));
 668               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5X", idSlatCh5, 2*index,TGeoTranslation(xx3,0.,-zPanel));
 669               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5I", idSlatCh5, index,TGeoTranslation(xx3,0.,0.));
 670               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6X", idSlatCh6, 2*index-1,TGeoTranslation(xx3,0.,zPanel));
 671               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6X", idSlatCh6, 2*index,TGeoTranslation(xx3,0.,-zPanel));
 672               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6I", idSlatCh6, index,TGeoTranslation(xx3,0.,0.));
 673             } else {
 674               if (i==1 && j==0){ // Rounded pcb of rounded slats (SR2. NR2)
 675                 GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 676                 GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel));
 677                 GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5I", idSlatCh5, index,TGeoTranslation(xx,0.,0.));
 678                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 679                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel));
 680                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6I", idSlatCh6, index,TGeoTranslation(xx,0.,0.));
 681               } else {
 682                 if ( (i == 0 || i == 1 || i == 2) && j == kNPCB3[i]-1) { // 1 pcb is shortened by 5cm
 683                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index-1,TGeoTranslation(xx2,0.,zPanel));
 684                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index,TGeoTranslation(xx2,0.,-zPanel));
 685                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SB5I", idSlatCh5, index,TGeoTranslation(xx2,0.,0.));
 686                 } else {
 687                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 688                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel));
 689                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05I", idSlatCh5, index,TGeoTranslation(xx,0.,0.));
 690                 }
 691                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 692                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel));
 693                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06I", idSlatCh6, index,TGeoTranslation(xx,0.,0.));
 694               }
 695             }
 696           }
 697         }
 698       }
 699
 700       // position the nomex volume inside the panel volume
 701       gMC->Gspos("S05N",1,"S05C",0.,0.,0.,0,"ONLY");
 702       gMC->Gspos("SB5N",1,"SB5C",0.,0.,0.,0,"ONLY");
 703       gMC->Gspos("SC5N",1,"SC5C",0.,0.,0.,0,"ONLY");
 704       gMC->Gspos("SD5N",1,"SD5C",0.,0.,0.,0,"ONLY");
 705       gMC->Gspos("S06N",1,"S06C",0.,0.,0.,0,"ONLY");
 706       gMC->Gspos("SC6N",1,"SC6C",0.,0.,0.,0,"ONLY");
 707       gMC->Gspos("SD6N",1,"SD6C",0.,0.,0.,0,"ONLY");
 708
 709       // position panel volume inside the bulk nomex material volume
 710       gMC->Gspos("S05C",1,"S05X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 711       gMC->Gspos("SB5C",1,"SB5X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 712       gMC->Gspos("SC5C",1,"SC5X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 713       gMC->Gspos("SD5C",1,"SD5X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 714       gMC->Gspos("S06C",1,"S06X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 715       gMC->Gspos("SC6C",1,"SC6X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 716       gMC->Gspos("SD6C",1,"SD6X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 717
 718       // position the PCB volume inside the insulating material volume
 719       gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY");
 720       gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY");
 721       gMC->Gspos("SC5P",1,"SC5I",0.,0.,0.,0,"ONLY");
 722       gMC->Gspos("SD5P",1,"SD5I",0.,0.,0.,0,"ONLY");
 723       gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY");
 724       gMC->Gspos("SC6P",1,"SC6I",0.,0.,0.,0,"ONLY");
 725       gMC->Gspos("SD6P",1,"SD6I",0.,0.,0.,0,"ONLY");
 726
 727       // position the horizontal frame volume inside the PCB volume
 728       gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY");
 729       gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY");
 730       gMC->Gspos("SC5H",1,"SC5P",0.,0.,0.,0,"ONLY");
 731       gMC->Gspos("SD5H",1,"SD5P",0.,0.,0.,0,"ONLY");
 732       gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY");
 733       gMC->Gspos("SC6H",1,"SC6P",0.,0.,0.,0,"ONLY");
 734       gMC->Gspos("SD6H",1,"SD6P",0.,0.,0.,0,"ONLY");
 735
 736       // position the sensitive volume inside the horizontal frame volume
 737       gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3);
 738       gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3);
 739       gMC->Gspos("SC5G",1,"SC5H",0.,0.,0.,0,"ONLY");
 740       gMC->Gspos("SD5G",1,"SD5H",0.,0.,0.,0,"ONLY");
 741       gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3);
 742       gMC->Gspos("SC6G",1,"SC6H",0.,0.,0.,0,"ONLY");
 743       gMC->Gspos("SD6G",1,"SD6H",0.,0.,0.,0,"ONLY");
 744
 745
 746       // position the border volumes inside the PCB volume
 747       Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.;
 748       Int_t rotB = 0;
 749       gMC->Matrix(rotB,90,0,90,270,180,0); // rotation around x for second border
 750
 751       gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY");
 752       gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY");
 753       gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY");
 754       gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY");
 755       gMC->Gspos("SC5B",1,"SC5P",0., 0.,0.,0,"ONLY");
 756       gMC->Gspos("SC5B",2,"SC5P",0., 0.,0.,rotB,"ONLY");
 757       gMC->Gspos("SD5B",1,"SD5P",0., 0.,0.,0,"ONLY");
 758       gMC->Gspos("S05B",1,"SD5P",0., yborder,0.,0,"ONLY");
 759
 760       gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY");
 761       gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY");
 762       gMC->Gspos("SC6B",1,"SC6P",0., 0.,0.,0,"ONLY");
 763       gMC->Gspos("SC6B",2,"SC6P",0., 0.,0.,rotB,"ONLY");
 764       gMC->Gspos("SD6B",1,"SD6P",0., 0.,0.,0,"ONLY");
 765       gMC->Gspos("S06B",1,"SD6P",0., yborder,0.,0,"ONLY");
 766
 767       // create the NULOC volume and position it in the horizontal frame
 768       gMC->Gsvolu("S05E","BOX",kNulocMaterial,nulocpar,3);
 769       gMC->Gsvolu("S06E","BOX",kNulocMaterial,nulocpar,3);
 770       index = 0;
 771       Float_t xxmax2 = xxmax - pcbDLength3/2.;
 772       Float_t xxmax3 = xxmax - (kPcbLength-csvPcbLength)/2.;
 773       Float_t rPhi3 = TMath::ASin((kYpos3[1]-kPcbHeight/2.)/AliMUONConstants::Rmin(2));
 774       Float_t xxmax4 = (AliMUONConstants::Rmin(2)*TMath::Cos(rPhi3)-kVframeLength/2.) - (kBframeLength - kNulocLength)/2.;
 775       for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) {
 776         index++;
 777         gMC->Gspos("S05E",2*index-1,"S05B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
 778         gMC->Gspos("S05E",2*index  ,"S05B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
 779         gMC->Gspos("S06E",2*index-1,"S06B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
 780         gMC->Gspos("S06E",2*index  ,"S06B", xx, 0., kBframeWidth/2.-  kNulocWidth/2, 0, "ONLY");
 781         if (xx > -xxmax2 && xx< xxmax2) {
 782           gMC->Gspos("S05E",2*index-1,"SB5B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 783           gMC->Gspos("S05E",2*index  ,"SB5B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 784         }
 785         if (xx > -xxmax3 && xx< xxmax3) {
 786           gMC->Gspos("S05E",2*index-1,"SC5B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2., 0, "ONLY");
 787           gMC->Gspos("S05E",2*index  ,"SC5B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2., 0, "ONLY");
 788           gMC->Gspos("S06E",2*index-1,"SC6B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 789           gMC->Gspos("S06E",2*index  ,"SC6B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 790         }
 791         if (xx > xxmax4 && xx< xxmax) {
 792           gMC->Gspos("S05E",2*index-1,"SD5B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 793           gMC->Gspos("S05E",2*index  ,"SD5B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 794           gMC->Gspos("S06E",2*index-1,"SD6B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 795           gMC->Gspos("S06E",2*index  ,"SD6B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 796         }
 797       }
 798
 799       //
 800       //Geometry of the support pannel Verticla length 3.62m, horizontal length 1.62m, internal radius  dMotherInner of SC05 and SC06  (F. Orsini, Saclay)
 801       //Carbon fiber of 0.3 mm thick (2 layers) and a central layer of Nomex of 15mm thick.
 802       // Outer excess and inner recess for mother volume radius
 803       // with respect to ROuter and RInner
 804       Float_t dMotherInner = AliMUONConstants::Rmin(2)-kRframeHeight;
 805       Float_t nomexthickness = 1.5;
 806       Float_t carbonthickness = 0.03;
 807       Float_t supporthlength =  162.;  //    chamber 5
 808       Float_t supporthlengthCh6 =  167.;  // chamber 6
 809       Float_t supportvlength =  362.;
 810
 811       // Generating the composite shape of the carbon and nomex pannels
 812       new TGeoBBox("shNomexBoxSt3",supporthlength/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
 813       new TGeoBBox("shCarbonBoxSt3",supporthlength/2., supportvlength/2. ,carbonthickness/2.);
 814       new TGeoBBox("shNomexBoxSt3Ch6",(supporthlengthCh6)/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
 815       new TGeoBBox("shCarbonBoxSt3Ch6",(supporthlengthCh6)/2., supportvlength/2. ,carbonthickness/2.);
 816       new TGeoTubeSeg("shNomexHoleSt3",0., dMotherInner, nomexthickness/2.+carbonthickness+3*kCableWidth+0.001, -90. ,90.);
 817       new TGeoTubeSeg("shCarbonHoleSt3",0., dMotherInner, carbonthickness/2.+0.001, -90. ,90.);
 818       TGeoTranslation* trHoleSt3 = new TGeoTranslation("trHoleSt3",-supporthlength/2.,0.,0.);
 819       trHoleSt3->RegisterYourself();
 820       TGeoTranslation* trHoleSt3Ch6 = new TGeoTranslation("trHoleSt3Ch6",-(supporthlengthCh6)/2.,0.,0.);
 821       trHoleSt3Ch6->RegisterYourself();
 822       TGeoCompositeShape* shNomexSupportSt3  = new TGeoCompositeShape("shNomexSupportSt3","shNomexBoxSt3-shNomexHoleSt3:trHoleSt3");
 823       TGeoCompositeShape* shCarbonSupportSt3 = new TGeoCompositeShape("shCarbonSupportSt3","shCarbonBoxSt3-shCarbonHoleSt3:trHoleSt3");
 824       TGeoCompositeShape* shNomexSupportSt3Ch6  = new TGeoCompositeShape("shNomexSupportSt3Ch6","shNomexBoxSt3Ch6-shNomexHoleSt3:trHoleSt3Ch6");
 825       TGeoCompositeShape* shCarbonSupportSt3Ch6 = new TGeoCompositeShape("shCarbonSupportSt3Ch6","shCarbonBoxSt3Ch6-shCarbonHoleSt3:trHoleSt3Ch6");
 826
 827       // Generating Nomex and Carbon pannel volumes
 828       TGeoVolume * voNomexSupportSt3  = new TGeoVolume("S05S", shNomexSupportSt3, kMedNomex);
 829       TGeoVolume * voCarbonSupportSt3 = new TGeoVolume("S05K", shCarbonSupportSt3, kMedCarbon);
 830       TGeoVolume * voNomexSupportSt3Ch6  = new TGeoVolume("S06S", shNomexSupportSt3Ch6, kMedNomex);
 831       TGeoVolume * voCarbonSupportSt3Ch6 = new TGeoVolume("S06K", shCarbonSupportSt3Ch6, kMedCarbon);
 832
 833       TGeoTranslation *trCarbon1St3   = new TGeoTranslation("trCarbon1St3",0.,0., -(nomexthickness+carbonthickness)/2.);
 834       TGeoTranslation *trCarbon2St3   = new TGeoTranslation("trCarbon2St3",0.,0.,  (nomexthickness+carbonthickness)/2.);
 835       voNomexSupportSt3->AddNode(voCarbonSupportSt3,1,trCarbon1St3);
 836       voNomexSupportSt3->AddNode(voCarbonSupportSt3,2,trCarbon2St3);
 837       voNomexSupportSt3Ch6->AddNode(voCarbonSupportSt3Ch6,1,trCarbon1St3);
 838       voNomexSupportSt3Ch6->AddNode(voCarbonSupportSt3Ch6,2,trCarbon2St3);
 839
 840
 841       // Add readout cables
 842       gMC->Gsvolu("S05L","BOX",kCableMaterial,dum,0);
 843       gMC->Gsvolu("S06L","BOX",kCableMaterial,dum,0);
 844
 845       ySlat3 = 0.;
 846       Float_t lCableX = 0.;
 847       Float_t lCableX6 = 0.;
 848       Float_t lCableY = 0.;
 849       Float_t lCableZ = 0.;
 850       Float_t cablepar[3] = {supporthlength/2., kCableHeight/2., kCableWidth/2.};
 851       Float_t cablepar6[3] = {supporthlengthCh6/2., kCableHeight/2., kCableWidth/2.};
 852       Float_t lCableDY = 0.;
 853       Int_t cIndex = 0;
 854       Int_t cIndex6 = 0;
 855       for (i = 0; i<kNslats3; i++){
 856         Int_t iCable = 1;
 857         cIndex = 0;
 858         cIndex6 = 0;
 859         ySlat3 += kYpos3[i];
 860         lCableY = ySlat3;
 861
 862         // Cables going out from the start of slat
 863         if(kNPCB3[i]>=4){ // Only if 4 or more pcb
 864           // First top cables
 865           cablepar[0] = supporthlength/2.;
 866           lCableX = 0.;
 867           cablepar6[0] = supporthlengthCh6/2.;
 868           lCableX6 = 0.;
 869           lCableDY = (kYpos3[i+1]+kYpos3[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
 870           lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
 871           if(i==0){ // central slat is shorter (rounded)
 872             cablepar[0] -= (kPcbLength-csvPcbLength)/2.;
 873             lCableX = (kPcbLength-csvPcbLength)/2.;
 874             cablepar6[0] -= (kPcbLength-csvPcbLength)/2.;
 875             lCableX6 = (kPcbLength-csvPcbLength)/2.;
 876           }
 877           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
 878           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
 879           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 880           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 881
 882           // Then bottom cables
 883           if(i>0){
 884             if(i==1){ // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
 885               cablepar[0] -= dMotherInner/2.;
 886               lCableX += dMotherInner/2.;
 887               cablepar6[0] -= dMotherInner/2.;
 888               lCableX6 += dMotherInner/2.;
 889               lCableDY = (kYpos3[i]+kYpos3[i])/2.-cablepar[1];
 890             }
 891             if(i>=2){
 892               lCableDY = (kYpos3[i]+kYpos3[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
 893               if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
 894                 lCableDY = lCableY - dMotherInner - cablepar[1];
 895               }
 896             }
 897             gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
 898             gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
 899             gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 900             gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 901           }
 902         }
 903
 904         // Rounded slats have an extra cable starting at second pcb
 905         if(i==1){
 906           // First top cables
 907           cablepar[0] = (supporthlength-kPcbLength-kVframeLength)/2.;
 908           lCableX = (kPcbLength+kVframeLength)/2.;
 909           cablepar6[0] = (supporthlengthCh6-kPcbLength-kVframeLength)/2.;
 910           lCableX6 = (kPcbLength+kVframeLength)/2.;
 911           lCableDY = (kYpos3[i+1]+kYpos3[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
 912           lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
 913           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
 914           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
 915           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 916           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 917           // Then bottom cables
 918           lCableDY = (kYpos3[i]+kYpos3[i])/2.-cablepar[1];
 919           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
 920           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
 921           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 922           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 923         }
 924
 925         // Cables going out from the end of the slats
 926         // First top cables
 927         cablepar[0] = (supporthlength-(slatLength3[i]+kDslatLength)+kVframeLength)/2.;
 928         lCableX = slatLength3[i]-kVframeLength+kDslatLength+cablepar[0]-supporthlength/2.;
 929         cablepar6[0] = (supporthlengthCh6-(slatLength3[i]+kDslatLength)+kVframeLength)/2.;
 930         lCableX6 = slatLength3[i]-kVframeLength+kDslatLength+cablepar6[0]-supporthlengthCh6/2.;
 931         if(i+1>=kNslats3 || i+2>=kNslats3){ // If no more higher slats, then use distance to lower slat
 932           lCableDY = kPcbHeight/2.+cablepar[1];
 933         }
 934         else {
 935           lCableDY = (kYpos3[i+1]+kYpos3[i+2])/2.-cablepar[1];
 936         }
 937         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
 938         if (i<=2){ // shortened pcb
 939           cablepar[0] += pcbDLength3/2.;
 940           lCableX -=  pcbDLength3/2.;
 941         }
 942         gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
 943         gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
 944         gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 945         gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 946         // Then bottom cables
 947         if(i>0){ // Loop is over top half of slats, lower half are symmetric
 948           if (i==1) {
 949             lCableDY = (kYpos3[i]+kYpos3[i])/2.-cablepar[1];
 950           }
 951           else{
 952             lCableDY = (kYpos3[i]+kYpos3[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
 953           }
 954           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
 955           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
 956           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 957           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 958         }
 959       }
 960
 961       Float_t dzCh5  = dzCh;
 962       TGeoTranslation* trSupport1St3   = new TGeoTranslation("trSupport1St3", supporthlength/2., 0. , dzCh5);
 963       TGeoRotation*    roSupportSt3    = new TGeoRotation("roSupportSt3",90.,180.,-90.);
 964       TGeoCombiTrans*  coSupport2St3   = new TGeoCombiTrans(-supporthlength/2., 0., -dzCh5, roSupportSt3);
 965       TGeoTranslation* trSupport1St3Ch6   = new TGeoTranslation("trSupport1St3Ch6", supporthlengthCh6/2., 0. , dzCh5);
 966       TGeoCombiTrans*  coSupport2St3Ch6   = new TGeoCombiTrans(-supporthlengthCh6/2., 0., -dzCh5, roSupportSt3);
 967       GetEnvelopes(5)->AddEnvelope("S05S", 0, 1, *trSupport1St3);
 968       GetEnvelopes(4)->AddEnvelope("S05S", 0, 2, *coSupport2St3);
 969       GetEnvelopes(7)->AddEnvelope("S06S", 0, 1, *trSupport1St3Ch6);
 970       GetEnvelopes(6)->AddEnvelope("S06S", 0, 2, *coSupport2St3Ch6);
 971       // End of pannel support geometry
 972
 973       // cout << "Geometry for Station 3...... done" << endl;
 974     }
 975   if (fStations[3]) {
 976
 977
 978     // //********************************************************************
 979     // //                            Station 4                             **
 980     // //********************************************************************
 981     // Mother volume for each chamber in St4 is an envelop (or assembly)
 982     // There is one assembly mother per half a chamber  called SC07I, SC07O, SC08I and SC08O
 983     // Same volume name definitions as in St3
 984     const Int_t   kNslats4          = 7;  // number of slats per quadrant
 985     const Int_t   kNPCB4[kNslats4]  = {5, 6, 5, 5, 4, 3, 2}; // n PCB per slat
 986     const Float_t kXpos4[kNslats4]  = {38.75, 0., 0., 0., 0., 0., 0.}; // J.C. Correct value
 987     const Float_t kYpos41[kNslats4] = {0., 38.2, 34.40, 36.60, 29.3, 37.0, 28.6};
 988     const Float_t kYpos42[kNslats4] = {0., 38.2, 37.85, 37.55, 29.4, 37.0, 28.6};
 989     Float_t slatLength4[kNslats4];
 990
 991     Float_t rPhi1 = TMath::RadToDeg()*(TMath::ASin((kYpos41[1]-hFramepar[1])/(AliMUONConstants::Rmin(3))));
 992     Float_t rPhi2 = TMath::RadToDeg()*(TMath::ACos(-vFramepar[0]/(AliMUONConstants::Rmin(3)-kRframeLength)));
 993     Float_t rFramepar4[5] = { AliMUONConstants::Rmin(3)-kRframeLength, AliMUONConstants::Rmin(3), kRframeWidth, rPhi1, rPhi2};
 994     Float_t vrFrameHeight = hFramepar[1]+kYpos41[1]-AliMUONConstants::Rmin(3)+kRframeLength;
 995
 996     char idSlatCh7[5];
 997     char idSlatCh8[5];
 998     Float_t xSlat4;
 999     Float_t ySlat41 = 0;
1000     Float_t ySlat42 = 0;
1001     angle = 0.;
1002
1003     for (i = 0; i<kNslats4; i++){
1004       slatLength4[i] = kPcbLength * kNPCB4[i] + 2. * kVframeLength;
1005       xSlat4 = slatLength4[i]/2. + kDslatLength + kXpos4[i];
1006       ySlat41 += kYpos41[i];
1007       ySlat42 += kYpos42[i];
1008
1009       spar[0] = slatLength4[i]/2.;
1010       spar[1] = kSlatHeight/2.;
1011       spar[2] = kSlatWidth/2.;
1012       Float_t dzCh4 = dzCh;
1013       Float_t zSlat4 = (i%2 ==0)? -zSlat : zSlat;
1014
1015       sprintf(idSlatCh7,"LC%d",kNslats4-1+i);
1016       detElemId = 713 - (i + kNslats4-1-6);
1017       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1018       if (detElemId % 2 == 0)
1019           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4),
1020                                    TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
1021       else
1022           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4),
1023                                    TGeoRotation("rot1",90,angle,90,270+angle,180,0) );
1024
1025       sprintf(idSlatCh7,"LC%d",3*kNslats4-2+i);
1026       detElemId = 700 + (i + kNslats4-1-6);
1027       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1028       if (detElemId % 2 == 0)
1029           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4),
1030                                    TGeoRotation("rot2",90,180+angle,90,270+angle,0,0) );
1031       else
1032           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4),
1033                                    TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
1034       if (i > 0) {
1035         sprintf(idSlatCh7,"LC%d",kNslats4-1-i);
1036         detElemId = 713 + (i + kNslats4-1-6);
1037         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1038         if (detElemId % 2 == 0 && detElemId != 714)
1039             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4),
1040                                                 TGeoRotation("rot3",90,angle,90,90+angle,0,0) );
1041         else
1042             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4),
1043                                                 TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
1044         sprintf(idSlatCh7,"LC%d",3*kNslats4-2-i);
1045         detElemId = 726 - (i + kNslats4-1-6);
1046         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1047         if (detElemId % 2 == 1 && detElemId != 725 )
1048             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4),
1049                                      TGeoRotation("rot4",90,180+angle,90,90+angle,180,0) );
1050         else
1051              GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4),
1052                                      TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) );
1053       }
1054
1055       sprintf(idSlatCh8,"LD%d",kNslats4-1+i);
1056       detElemId = 813 - (i + kNslats4-1-6);
1057       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1058       if (detElemId % 2 == 0)
1059           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4),
1060                                    TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
1061       else
1062           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4),
1063                                    TGeoRotation("rot5",90,angle,90,270+angle,180,0) );
1064
1065       sprintf(idSlatCh8,"LD%d",3*kNslats4-2+i);
1066       detElemId = 800 + (i + kNslats4-1-6);
1067       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1068       if (detElemId % 2 == 0)
1069           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4),
1070                                    TGeoRotation("rot6",90,180+angle,90,270+angle,0,0) );
1071       else
1072           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4),
1073                                    TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
1074       if (i > 0) {
1075         sprintf(idSlatCh8,"LD%d",kNslats4-1-i);
1076         detElemId = 813 + (i + kNslats4-1-6);
1077         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1078         if (detElemId % 2 == 0 && detElemId != 814)
1079             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4),
1080                                                 TGeoRotation("rot7",90,angle,90,90+angle,0,0) );
1081         else
1082             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4),
1083                                                 TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
1084         sprintf(idSlatCh8,"LD%d",3*kNslats4-2-i);
1085         detElemId = 826 - (i + kNslats4-1-6);
1086         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1087         if (detElemId % 2 == 1 && detElemId != 825 )
1088             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4),
1089                                      TGeoRotation("rot8",90,180+angle,90,90+angle,180,0) );
1090         else
1091             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4),
1092                                      TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
1093
1094       }
1095     }
1096
1097     // create the panel volume
1098
1099     gMC->Gsvolu("S07C","BOX",kCarbonMaterial,panelpar,3);
1100     gMC->Gsvolu("SD7C","BOX",kCarbonMaterial,panelpar,3);
1101     gMC->Gsvolu("S08C","BOX",kCarbonMaterial,panelpar,3);
1102     gMC->Gsvolu("SD8C","BOX",kCarbonMaterial,panelpar,3);
1103
1104     // create the nomex volume
1105
1106     gMC->Gsvolu("S07N","BOX",kNomexMaterial,nomexpar,3);
1107     gMC->Gsvolu("SD7N","BOX",kNomexMaterial,nomexpar,3);
1108     gMC->Gsvolu("S08N","BOX",kNomexMaterial,nomexpar,3);
1109     gMC->Gsvolu("SD8N","BOX",kNomexMaterial,nomexpar,3);
1110
1111
1112     // create the nomex volume (bulk)
1113
1114     gMC->Gsvolu("S07X","BOX",kNomexBMaterial,nomexbpar,3);
1115     gMC->Gsvolu("SD7X","BOX",kNomexBMaterial,nomexbpar,3);
1116     gMC->Gsvolu("S08X","BOX",kNomexBMaterial,nomexbpar,3);
1117     gMC->Gsvolu("SD8X","BOX",kNomexBMaterial,nomexbpar,3);
1118
1119     // create the insulating material volume
1120
1121     gMC->Gsvolu("S07I","BOX",kInsuMaterial,insupar,3);
1122     gMC->Gsvolu("SD7I","BOX",kInsuMaterial,insupar,3);
1123     gMC->Gsvolu("S08I","BOX",kInsuMaterial,insupar,3);
1124     gMC->Gsvolu("SD8I","BOX",kInsuMaterial,insupar,3);
1125
1126     // create the PCB volume
1127
1128     gMC->Gsvolu("S07P","BOX",kPcbMaterial,pcbpar,3);
1129     gMC->Gsvolu("SD7P","BOX",kPcbMaterial,pcbpar,3);
1130     gMC->Gsvolu("S08P","BOX",kPcbMaterial,pcbpar,3);
1131     gMC->Gsvolu("SD8P","BOX",kPcbMaterial,pcbpar,3);
1132
1133     // create the sensitive volumes,
1134
1135     gMC->Gsvolu("S07G","BOX",kSensMaterial,dum,0);
1136     gMC->Gsvolu("SD7G","BOX",kSensMaterial,senspar,3);
1137     gMC->Gsvolu("S08G","BOX",kSensMaterial,dum,0);
1138     gMC->Gsvolu("SD8G","BOX",kSensMaterial,senspar,3);
1139
1140     // create the vertical frame volume
1141
1142     gMC->Gsvolu("S07V","BOX",kVframeMaterial,vFramepar,3);
1143     gMC->Gsvolu("S08V","BOX",kVframeMaterial,vFramepar,3);
1144
1145     // create the rounded vertical frame volume
1146
1147     gMC->Gsvolu("SD7D","TUBS",kRframeMaterial,rFramepar4,5);
1148     gMC->Gsvolu("SD8D","TUBS",kRframeMaterial,rFramepar4,5);
1149
1150     // create the horizontal frame volume
1151
1152     gMC->Gsvolu("S07H","BOX",kHframeMaterial,hFramepar,3);
1153     gMC->Gsvolu("SD7H","BOX",kHframeMaterial,hFramepar,3);
1154     gMC->Gsvolu("S08H","BOX",kHframeMaterial,hFramepar,3);
1155     gMC->Gsvolu("SD8H","BOX",kHframeMaterial,hFramepar,3);
1156
1157     // create the horizontal border volume
1158
1159     gMC->Gsvolu("S07B","BOX",kBframeMaterial,bFramepar,3);
1160     gMC->Gsvolu("SD7B","BOX",kBframeMaterial,bFramepar,3);
1161     gMC->Gsvolu("S08B","BOX",kBframeMaterial,bFramepar,3);
1162     gMC->Gsvolu("SD8B","BOX",kBframeMaterial,bFramepar,3);
1163
1164     // Replace the volume shape with a composite shape
1165     // with substracted overlap with beam shield
1166     if ( gMC->IsRootGeometrySupported() ) {
1167
1168       // Get shape
1169       Int_t nSlatType = 1;
1170       Int_t nVol = 8;
1171       char slatType[2] = "D"; // D: Rounded slat
1172       char volLetter[9] = "CNXIPHBG";
1173       char volName[5] = "SD7C";
1174       char compName[14] = "SD7C";
1175       char csName[16] = "rounded4SlatD7C";
1176       TGeoVolume *mVol = 0x0;
1177       // Beam shield recess
1178       new TGeoTube("tube4Cut", 0., AliMUONConstants::Rmin(3), kSlatWidth/2.+0.001);
1179       TObjArray rounded4Slat(nSlatType*((nVol+1)*2));
1180       // Displacement
1181       TGeoTranslation* trDTube4 = new TGeoTranslation("trDTube4", -(kPcbLength+kVframeLength)/2., -kYpos41[1], 0.);
1182       trDTube4->RegisterYourself();
1183       TObjArray composite4(nSlatType*((nVol+1)*2));
1184       new TGeoBBox("box4DCut",(kPcbLength+kVframeLength)/2., hFramepar[1], vFramepar[2]+0.001);
1185       // Displacement
1186       TGeoTranslation* trDBox4 = new TGeoTranslation("trDBox4",kPcbLength/2., kYpos41[1], 0.);
1187       trDBox4->RegisterYourself();
1188
1189       TGeoBBox *box4Vframe = new TGeoBBox("box4Vframe",vFramepar[0],vrFrameHeight/2., vFramepar[2]);
1190       TGeoTranslation* trVBox4 = new TGeoTranslation("trVBox4", 0., AliMUONConstants::Rmin(3)-kRframeLength + box4Vframe->GetDY(), 0.);
1191       trVBox4->RegisterYourself();
1192
1193       for(int iCh=7; iCh<=8; iCh++){
1194         for (int iSlatType = 0; iSlatType<nSlatType; iSlatType++) {
1195           for (int iVol = 0; iVol<nVol; iVol++){
1196             Int_t lIndex = (iCh-7)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+iVol;
1197             sprintf(volName,"S%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
1198             mVol = gGeoManager->FindVolumeFast(volName);
1199             if ( !mVol ) {
1200               AliErrorStream()
1201                 << "Slat volume " << volName << " not found" << endl;
1202             }
1203             else {
1204               rounded4Slat[lIndex] = mVol->GetShape();
1205               sprintf(csName,"rounded4Slat%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
1206               ((TGeoShape*)rounded4Slat[lIndex])->SetName(csName);
1207
1208               // Composite shape
1209               TString compOperation(csName);
1210               compOperation+="-tube4Cut:tr";
1211               compOperation+=slatType[iSlatType];
1212               compOperation+="Tube4";
1213               if (strstr(volName,"B")){
1214                 // Displacement
1215                 Float_t posXb = 0.;
1216                 Float_t posYb = -( kPcbHeight - kBframeHeight ) / 2.;
1217                 Float_t posZb = 0.;
1218                 TGeoTranslation* trB = new TGeoTranslation("trB", posXb, posYb, posZb);
1219                 trB->RegisterYourself();
1220                 compOperation.ReplaceAll("-tube4Cut",":trB-tube4Cut");
1221               }
1222               sprintf(compName,"composite4%d%c",iCh,volLetter[iVol]);
1223               composite4[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1224
1225               // Reset shape to volume
1226               mVol->SetShape((TGeoShape*)composite4[lIndex]);
1227             }
1228           }
1229
1230           // For rounded spacer
1231           Int_t lIndex = (iCh-7)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+nVol;
1232           sprintf(volName,"S%c%dD",slatType[iSlatType],iCh);
1233           mVol = gGeoManager->FindVolumeFast(volName);
1234           if ( !mVol ) {
1235             AliErrorStream()
1236               << "Slat volume " << volName << " not found" << endl;
1237           }
1238           else {
1239             rounded4Slat[lIndex] = mVol->GetShape();
1240             sprintf(csName,"rounded4Slat%c%dD",slatType[iSlatType],iCh);
1241             ((TGeoShape*)rounded4Slat[lIndex])->SetName(csName);
1242
1243             // Composite shape
1244             TString compOperation(csName);
1245             if (strstr(volName,"SD")){
1246               compOperation.Prepend("(");
1247               compOperation+="+box4Vframe:trVBox4)*box4DCut:trDBox4";
1248             }
1249             sprintf(compName,"composite4%c%dD",slatType[iSlatType],iCh);
1250             composite4[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1251             // Reset shape to volume
1252             mVol->SetShape((TGeoShape*)composite4[lIndex]);
1253           }
1254         }
1255       }
1256     }
1257
1258
1259     index = 0;
1260     for (i = 0; i < kNslats4; i++){
1261       for (Int_t quadrant = 1; quadrant <= 4; quadrant++) {
1262
1263         if (i == 0 && quadrant == 2) continue;
1264         if (i == 0 && quadrant == 4) continue;
1265
1266         sprintf(idSlatCh7,"LC%d",ConvertSlatNum(i,quadrant,kNslats4-1));
1267         sprintf(idSlatCh8,"LD%d",ConvertSlatNum(i,quadrant,kNslats4-1));
1268         Int_t moduleSlatCh7 = GetModuleId(idSlatCh7);
1269         Int_t moduleSlatCh8 = GetModuleId(idSlatCh8);
1270
1271         Float_t xvFrame  = (slatLength4[i] - kVframeLength)/2.;
1272
1273         // position the vertical frames
1274         if (i != 1) {
1275           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1276           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1277           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1278           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1279         } else { // Vertical and Rounded+Vertical spacer
1280           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1281           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7D", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos41[1],0.));
1282           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1283           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8D", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos42[1],0.));
1284         }
1285         // position the panels and the insulating material
1286         for (j = 0; j < kNPCB4[i]; j++){
1287           index++;
1288           Float_t xx = kSensLength * (-kNPCB4[i]/2.+j+.5);
1289           Float_t zPanel = spar[2] - nomexbpar[2];
1290           if (i==1 && j==0){ // Rounded pcb of rounded slat
1291             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1292             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel));
1293             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7I", idSlatCh7, index,TGeoTranslation(xx,0.,0.));
1294             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1295             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel));
1296             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8I", idSlatCh8, index,TGeoTranslation(xx,0.,0.));
1297           } else {
1298             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1299             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel));
1300             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07I", idSlatCh7, index,TGeoTranslation(xx,0.,0.));
1301             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1302             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel));
1303             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08I", idSlatCh8, index,TGeoTranslation(xx,0.,0.));
1304           }
1305         }
1306       }
1307     }
1308
1309     // position the nomex volume inside the panel volume
1310     gMC->Gspos("S07N",1,"S07C",0.,0.,0.,0,"ONLY");
1311     gMC->Gspos("SD7N",1,"SD7C",0.,0.,0.,0,"ONLY");
1312     gMC->Gspos("S08N",1,"S08C",0.,0.,0.,0,"ONLY");
1313     gMC->Gspos("SD8N",1,"SD8C",0.,0.,0.,0,"ONLY");
1314
1315     // position panel volume inside the bulk nomex material volume
1316     gMC->Gspos("S07C",1,"S07X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1317     gMC->Gspos("SD7C",1,"SD7X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1318     gMC->Gspos("S08C",1,"S08X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1319     gMC->Gspos("SD8C",1,"SD8X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1320
1321     // position the PCB volume inside the insulating material volume
1322     gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY");
1323     gMC->Gspos("SD7P",1,"SD7I",0.,0.,0.,0,"ONLY");
1324     gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY");
1325     gMC->Gspos("SD8P",1,"SD8I",0.,0.,0.,0,"ONLY");
1326
1327     // position the horizontal frame volume inside the PCB volume
1328     gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY");
1329     gMC->Gspos("SD7H",1,"SD7P",0.,0.,0.,0,"ONLY");
1330     gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY");
1331     gMC->Gspos("SD8H",1,"SD8P",0.,0.,0.,0,"ONLY");
1332
1333     // position the sensitive volume inside the horizontal frame volume
1334     gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3);
1335     gMC->Gspos("SD7G",1,"SD7H",0.,0.,0.,0,"ONLY");
1336     gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3);
1337     gMC->Gspos("SD8G",1,"SD8H",0.,0.,0.,0,"ONLY");
1338
1339     // position the border volumes inside the PCB volume
1340     Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.;
1341     gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY");
1342     gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY");
1343     gMC->Gspos("SD7B",1,"SD7P",0., 0.,0.,0,"ONLY");
1344     gMC->Gspos("S07B",1,"SD7P",0., yborder,0.,0,"ONLY");
1345     gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY");
1346     gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY");
1347     gMC->Gspos("SD8B",1,"SD8P",0., 0.,0.,0,"ONLY");
1348     gMC->Gspos("S08B",1,"SD8P",0., yborder,0.,0,"ONLY");
1349
1350     // create the NULOC volume and position it in the horizontal frame
1351
1352     gMC->Gsvolu("S07E","BOX",kNulocMaterial,nulocpar,3);
1353     gMC->Gsvolu("S08E","BOX",kNulocMaterial,nulocpar,3);
1354     index = 0;
1355     Float_t rPhi3 = TMath::ASin((kYpos41[1]-kPcbHeight/2.)/AliMUONConstants::Rmin(3));
1356     Float_t xxmax4 = (AliMUONConstants::Rmin(3)*TMath::Cos(rPhi3)-kVframeLength/2.) - (kBframeLength - kNulocLength)/2.;
1357     for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) {
1358       index++;
1359       gMC->Gspos("S07E",2*index-1,"S07B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1360       gMC->Gspos("S07E",2*index  ,"S07B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1361       gMC->Gspos("S08E",2*index-1,"S08B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1362       gMC->Gspos("S08E",2*index  ,"S08B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1363     }
1364     if (xx > xxmax4 && xx< xxmax) {
1365       gMC->Gspos("S07E",2*index-1,"SD7B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1366       gMC->Gspos("S07E",2*index  ,"SD7B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1367       gMC->Gspos("S08E",2*index-1,"SD8B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1368       gMC->Gspos("S08E",2*index  ,"SD8B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1369     }
1370
1371     //
1372     //Geometry of the support pannel Verticla length 5.3m, horizontal length 2.6m, internal radius  dMotherInner o SC07 and SC08  (F. Orsini, Saclay)
1373     //Carbon fiber of 0.3 mm thick (2 layers) and a central layer of Nomex of 15mm thick.
1374     Float_t dMotherInner =  AliMUONConstants::Rmin(3)-kRframeHeight;
1375     Float_t nomexthickness = 1.5;
1376     Float_t carbonthickness = 0.03;
1377     Float_t supporthlength =  260.;
1378     Float_t supportvlength =  530.;
1379     // Generating the composite shape of the carbon and nomex pannels
1380     new TGeoBBox("shNomexBoxSt4",supporthlength/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
1381     new TGeoBBox("shCarbonBoxSt4",supporthlength/2., supportvlength/2. ,carbonthickness/2.);
1382     new TGeoTubeSeg("shNomexHoleSt4",0., dMotherInner, nomexthickness/2.+carbonthickness+3*kCableWidth+0.001, -90. ,90.);
1383     new TGeoTubeSeg("shCarbonHoleSt4",0., dMotherInner, carbonthickness/2.+0.001, -90. ,90.);
1384     TGeoTranslation* trHoleSt4 = new TGeoTranslation("trHoleSt4",-supporthlength/2.,0.,0.);
1385     trHoleSt4->RegisterYourself();
1386     TGeoCompositeShape* shNomexSupportSt4  = new TGeoCompositeShape("shNomexSupportSt4","shNomexBoxSt4-shNomexHoleSt4:trHoleSt4");
1387     TGeoCompositeShape* shCarbonSupportSt4 = new TGeoCompositeShape("shCarbonSupportSt4","shCarbonBoxSt4-shCarbonHoleSt4:trHoleSt4");
1388
1389    // Generating Nomex and Carbon pannel volumes
1390     TGeoVolume* voNomexSupportSt4   = new TGeoVolume("S07S", shNomexSupportSt4, kMedNomex);
1391     TGeoVolume* voCarbonSupportSt4  = new TGeoVolume("S07K", shCarbonSupportSt4, kMedCarbon);
1392     TGeoVolume* voNomexSupportSt4Ch8   = new TGeoVolume("S08S", shNomexSupportSt4, kMedNomex);
1393     TGeoVolume* voCarbonSupportSt4Ch8  = new TGeoVolume("S08K", shCarbonSupportSt4, kMedCarbon);
1394     TGeoTranslation* trCarbon1St4   = new TGeoTranslation("trCarbon1St4",0.,0., -(nomexthickness+carbonthickness)/2.);
1395     TGeoTranslation* trCarbon2St4   = new TGeoTranslation("trCarbon2St4",0.,0.,  (nomexthickness+carbonthickness)/2.);
1396     voNomexSupportSt4->AddNode(voCarbonSupportSt4,1,trCarbon1St4);
1397     voNomexSupportSt4->AddNode(voCarbonSupportSt4,2,trCarbon2St4);
1398     voNomexSupportSt4Ch8->AddNode(voCarbonSupportSt4Ch8,1,trCarbon1St4);
1399     voNomexSupportSt4Ch8->AddNode(voCarbonSupportSt4Ch8,2,trCarbon2St4);
1400
1401     // Add readout cables
1402     gMC->Gsvolu("S07L","BOX",kCableMaterial,dum,0);
1403     gMC->Gsvolu("S08L","BOX",kCableMaterial,dum,0);
1404
1405     ySlat41 = 0.;
1406     ySlat42 = 0.;
1407     Float_t lCableX = 0.;
1408     Float_t lCableY = 0.;
1409     Float_t lCableY8 = 0.;
1410     Float_t lCableZ = 0.;
1411     Float_t cablepar[3] = {supporthlength/2., kCableHeight/2., kCableWidth/2.};
1412     Float_t lCableDY = 0.;
1413     Float_t lCableDY8 = 0.;
1414     for (i = 0; i<kNslats4; i++){
1415       Int_t iCable = 1;
1416       Int_t cIndex = 0;
1417       Int_t cIndex8 = 0;
1418       ySlat41 += kYpos41[i];
1419       ySlat42 += kYpos42[i];
1420
1421       lCableY = ySlat41;
1422       lCableY8 = ySlat42;
1423
1424       // Cables going out from the start of slat
1425       if(kNPCB4[i]>=4){ // Only if 4 or more pcb
1426         // First top cables
1427         cablepar[0] = (supporthlength-kXpos4[i])/2.;
1428         lCableX = kXpos4[i]/2.;
1429         lCableDY = (kYpos41[i+1]+kYpos41[i+2])/2.-cablepar[1];
1430         lCableDY8 = (kYpos42[i+1]+kYpos42[i+2])/2.-cablepar[1];
1431         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
1432         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1433         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1434         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8+lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1435         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8+lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1436         // Then bottom cables
1437         if (i>0){
1438           if (i==1) { // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
1439             cablepar[0] = (supporthlength-kXpos4[i]-dMotherInner)/2.;
1440             lCableX = (kXpos4[i]+dMotherInner)/2.;
1441             lCableDY = (kYpos41[i]+kYpos41[i])/2.-cablepar[1];
1442             lCableDY8 = (kYpos42[i]+kYpos42[i])/2.-cablepar[1];
1443           }
1444           if (i>=2) {
1445             lCableDY = (kYpos41[i]+kYpos41[i-1])/2.-cablepar[1];
1446             if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
1447               lCableDY = lCableY - dMotherInner - cablepar[1];
1448             }
1449             lCableDY8 = (kYpos42[i]+kYpos42[i-1])/2.-cablepar[1];
1450             if ((lCableY8-lCableDY8)<(dMotherInner+cablepar[1])){
1451               lCableDY8 = lCableY8 - dMotherInner - cablepar[1];
1452             }
1453           }
1454           gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
1455           gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
1456           gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8-lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1457           gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8-lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1458         }
1459       }
1460
1461       // Rounded slats have an extra cable starting at second pcb
1462       if(i==1){
1463         // Only on top
1464         cablepar[0] = (supporthlength-kPcbLength-kVframeLength)/2.;
1465         lCableX = (kPcbLength+kVframeLength)/2.;
1466         lCableDY = (kYpos41[i+1]+kYpos41[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
1467         lCableDY8 = (kYpos42[i+1]+kYpos42[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
1468         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
1469         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1470         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1471         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8+lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1472         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8+lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1473       }
1474
1475       // Cables going out from the end of the slats
1476       cablepar[0] = (supporthlength-(slatLength4[i]+kXpos4[i]+kDslatLength)+kVframeLength)/2.;
1477       lCableX = slatLength4[i]+kXpos4[i]-kVframeLength+kDslatLength+cablepar[0]-supporthlength/2.;
1478       if(i+1>=kNslats4 || i+2>=kNslats4){ // If no more higher slats, then use distance to lower slat
1479         lCableDY = kPcbHeight/2.+cablepar[1];
1480         lCableDY8 = lCableDY;
1481       }
1482       else {
1483         lCableDY = (kYpos41[i+1]+kYpos41[i+2])/2.-cablepar[1];
1484         lCableDY8 = (kYpos42[i+1]+kYpos42[i+2])/2.-cablepar[1];
1485       }
1486       lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
1487       gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1488       gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1489       gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8+lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1490       gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8+lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1491       // Then bottom cables
1492       if(i>0){
1493         if (i==1) {
1494           lCableDY = (kYpos41[i]+kYpos41[i])/2.-cablepar[1];
1495           lCableDY8 = (kYpos42[i]+kYpos42[i])/2.-cablepar[1];
1496         }
1497         else{
1498           lCableDY = (kYpos41[i]+kYpos41[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
1499           if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
1500             lCableDY = lCableY - dMotherInner - cablepar[1];
1501           }
1502           lCableDY8 = (kYpos42[i]+kYpos42[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
1503           if ((lCableY8-lCableDY8)<(dMotherInner+cablepar[1])){
1504             lCableDY8 = lCableY8 - dMotherInner - cablepar[1];
1505           }
1506         }
1507         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
1508         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
1509         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8-lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1510         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8-lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1511       }
1512     }
1513
1514     Float_t dzCh7  = dzCh;
1515     TGeoTranslation* trSupport1St4   = new TGeoTranslation("trSupport1St4", supporthlength/2., 0. , dzCh7);
1516     TGeoRotation*    roSupportSt4    = new TGeoRotation("roSupportSt4",90.,180.,-90.);
1517     TGeoCombiTrans*  coSupport2St4   = new TGeoCombiTrans(-supporthlength/2., 0., -dzCh7, roSupportSt4);
1518     GetEnvelopes(9)->AddEnvelope("S07S", 0, 1, *trSupport1St4);
1519     GetEnvelopes(8)->AddEnvelope("S07S", 0, 2, *coSupport2St4);
1520     GetEnvelopes(11)->AddEnvelope("S08S", 0, 1, *trSupport1St4);
1521     GetEnvelopes(10)->AddEnvelope("S08S", 0, 2, *coSupport2St4);
1522
1523     // End of pannel support geometry
1524
1525     // cout << "Geometry for Station 4...... done" << endl;
1526
1527   }
1528
1529   if (fStations[4]) {
1530
1531
1532     // //********************************************************************
1533     // //                            Station 5                             **
1534     // //********************************************************************
1535     // Mother volume for each chamber in St4 is an envelop (or assembly)
1536     // There is one assembly mother per half a chamber  called SC09I, SC09O, SC10I and SC10O
1537     // Same volume name definitions as in St3
1538
1539     const Int_t   kNslats5         = 7;  // number of slats per quadrant
1540     const Int_t   kNPCB5[kNslats5] = {5, 6, 6, 6, 5, 4, 3}; // n PCB per slat
1541     const Float_t kXpos5[kNslats5] = {38.75, 0., 0., 0., 0., 0., 0.}; // J.C. Correct value
1542     const Float_t kYpos5[kNslats5] = {0., 38.2, 37.9, 37.6, 37.3, 37.05, 36.75};
1543     Float_t slatLength5[kNslats5];
1544
1545     Float_t rPhi1 = TMath::RadToDeg()*(TMath::ASin((kYpos5[1]-hFramepar[1])/(AliMUONConstants::Rmin(4))));
1546     Float_t rPhi2 = TMath::RadToDeg()*(TMath::ACos(-vFramepar[0]/(AliMUONConstants::Rmin(4)-kRframeLength)));
1547     Float_t rFramepar5[5] = { AliMUONConstants::Rmin(4)-kRframeLength, AliMUONConstants::Rmin(4), kRframeWidth, rPhi1, rPhi2};
1548     Float_t vrFrameHeight = hFramepar[1]+kYpos5[1]-AliMUONConstants::Rmin(4)+kRframeLength;
1549
1550     char idSlatCh9[5];
1551     char idSlatCh10[5];
1552     Float_t xSlat5;
1553     Float_t ySlat5 = 0;
1554     angle = 0.;
1555
1556     for (i = 0; i < kNslats5; i++){
1557
1558       slatLength5[i] = kPcbLength * kNPCB5[i] + 2.* kVframeLength;
1559       xSlat5 = slatLength5[i]/2. + kDslatLength + kXpos5[i];
1560       ySlat5 += kYpos5[i];
1561
1562       spar[0] = slatLength5[i]/2.;
1563       spar[1] = kSlatHeight/2.;
1564       spar[2] = kSlatWidth/2.;
1565
1566       Float_t dzCh5  = dzCh;
1567       Float_t zSlat5 = (i%2 ==0)? -zSlat : zSlat;
1568
1569       sprintf(idSlatCh9,"LE%d",kNslats5-1+i);
1570       detElemId = 913 - (i + kNslats5-1-6);
1571       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1572       if (detElemId % 2 == 0)
1573           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1574                                               TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
1575       else
1576           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1577                                               TGeoRotation("rot1",90,angle,90,270+angle,180,0) );
1578       sprintf(idSlatCh9,"LE%d",3*kNslats5-2+i);
1579       detElemId = 900 + (i + kNslats5-1-6);
1580       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1581       if (detElemId % 2 == 0)
1582           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1583                                               TGeoRotation("rot2",90,180+angle,90,270+angle,0,0) );
1584       else
1585           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1586                                               TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
1587       if (i > 0) {
1588         sprintf(idSlatCh9,"LE%d",kNslats5-1-i);
1589         detElemId = 913 + (i + kNslats5-1-6);
1590         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1591       if (detElemId % 2 == 0  && detElemId != 914)
1592           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1593                                      TGeoRotation("rot3",90,angle,90,90+angle,0,0) );
1594       else
1595           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1596                                      TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
1597         sprintf(idSlatCh9,"LE%d",3*kNslats5-2-i);
1598         detElemId = 926 - (i + kNslats5-1-6);
1599         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1600         if (detElemId % 2 == 1 && detElemId != 925 )
1601             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1602                                                 TGeoRotation("rot4",90,180+angle,90,90+angle,180,0)  );
1603         else
1604             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1605                                                 TGeoRotation("rot4",90,180+angle,90,270+angle,0,0)  );
1606       }
1607
1608       sprintf(idSlatCh10,"LF%d",kNslats5-1+i);
1609       detElemId = 1013 - (i + kNslats5-1-6);
1610       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1611       if (detElemId % 2 == 0)
1612           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1613                                               TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
1614       else
1615           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1616                                               TGeoRotation("rot5",90,angle,90,270+angle,180,0) );
1617
1618       sprintf(idSlatCh10,"LF%d",3*kNslats5-2+i);
1619       detElemId = 1000 + (i + kNslats5-1-6);
1620       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1621       if (detElemId % 2 == 0)
1622           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1623                                               TGeoRotation("rot6",90,180+angle,90,270+angle,0,0) );
1624       else
1625           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1626                                               TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
1627       if (i > 0) {
1628         sprintf(idSlatCh10,"LF%d",kNslats5-1-i);
1629         detElemId = 1013 + (i + kNslats5-1-6);
1630         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1631       if (detElemId % 2 == 0  && detElemId != 1014)
1632           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1633                                      TGeoRotation("rot7",90,angle,90,90+angle,0,0) );
1634       else
1635           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1636                                      TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
1637         sprintf(idSlatCh10,"LF%d",3*kNslats5-2-i);
1638         detElemId = 1026 - (i + kNslats5-1-6);
1639         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1640         if (detElemId % 2 == 1 && detElemId != 1025 )
1641             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1642                                               TGeoRotation("rot8",90,180+angle,90,90+angle,180,0) );
1643         else
1644             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1645                                               TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
1646       }
1647     }
1648
1649     // create the panel volume
1650
1651     gMC->Gsvolu("S09C","BOX",kCarbonMaterial,panelpar,3);
1652     gMC->Gsvolu("SD9C","BOX",kCarbonMaterial,panelpar,3);
1653     gMC->Gsvolu("S10C","BOX",kCarbonMaterial,panelpar,3);
1654     gMC->Gsvolu("SD0C","BOX",kCarbonMaterial,panelpar,3);
1655
1656     // create the nomex volume
1657
1658     gMC->Gsvolu("S09N","BOX",kNomexMaterial,nomexpar,3);
1659     gMC->Gsvolu("SD9N","BOX",kNomexMaterial,nomexpar,3);
1660     gMC->Gsvolu("S10N","BOX",kNomexMaterial,nomexpar,3);
1661     gMC->Gsvolu("SD0N","BOX",kNomexMaterial,nomexpar,3);
1662
1663
1664     // create the nomex volume (bulk)
1665
1666     gMC->Gsvolu("S09X","BOX",kNomexBMaterial,nomexbpar,3);
1667     gMC->Gsvolu("SD9X","BOX",kNomexBMaterial,nomexbpar,3);
1668     gMC->Gsvolu("S10X","BOX",kNomexBMaterial,nomexbpar,3);
1669     gMC->Gsvolu("SD0X","BOX",kNomexBMaterial,nomexbpar,3);
1670
1671     // create the insulating material volume
1672
1673     gMC->Gsvolu("S09I","BOX",kInsuMaterial,insupar,3);
1674     gMC->Gsvolu("SD9I","BOX",kInsuMaterial,insupar,3);
1675     gMC->Gsvolu("S10I","BOX",kInsuMaterial,insupar,3);
1676     gMC->Gsvolu("SD0I","BOX",kInsuMaterial,insupar,3);
1677
1678     // create the PCB volume
1679
1680     gMC->Gsvolu("S09P","BOX",kPcbMaterial,pcbpar,3);
1681     gMC->Gsvolu("SD9P","BOX",kPcbMaterial,pcbpar,3);
1682     gMC->Gsvolu("S10P","BOX",kPcbMaterial,pcbpar,3);
1683     gMC->Gsvolu("SD0P","BOX",kPcbMaterial,pcbpar,3);
1684
1685     // create the sensitive volumes,
1686
1687     gMC->Gsvolu("S09G","BOX",kSensMaterial,dum,0);
1688     gMC->Gsvolu("SD9G","BOX",kSensMaterial,senspar,3);
1689     gMC->Gsvolu("S10G","BOX",kSensMaterial,dum,0);
1690     gMC->Gsvolu("SD0G","BOX",kSensMaterial,senspar,3);
1691
1692     // create the vertical frame volume
1693
1694     gMC->Gsvolu("S09V","BOX",kVframeMaterial,vFramepar,3);
1695     gMC->Gsvolu("S10V","BOX",kVframeMaterial,vFramepar,3);
1696
1697     // create the rounded vertical frame volume
1698
1699     gMC->Gsvolu("SD9D","TUBS",kRframeMaterial,rFramepar5,5);
1700     gMC->Gsvolu("SD0D","TUBS",kRframeMaterial,rFramepar5,5);
1701
1702     // create the horizontal frame volume
1703
1704     gMC->Gsvolu("S09H","BOX",kHframeMaterial,hFramepar,3);
1705     gMC->Gsvolu("SD9H","BOX",kHframeMaterial,hFramepar,3);
1706     gMC->Gsvolu("S10H","BOX",kHframeMaterial,hFramepar,3);
1707     gMC->Gsvolu("SD0H","BOX",kHframeMaterial,hFramepar,3);
1708
1709     // create the horizontal border volume
1710
1711     gMC->Gsvolu("S09B","BOX",kBframeMaterial,bFramepar,3);
1712     gMC->Gsvolu("SD9B","BOX",kBframeMaterial,bFramepar,3);
1713     gMC->Gsvolu("S10B","BOX",kBframeMaterial,bFramepar,3);
1714     gMC->Gsvolu("SD0B","BOX",kBframeMaterial,bFramepar,3);
1715
1716     // Replace the volume shape with a composite shape
1717     // with substracted overlap with beam shield
1718     if ( gMC->IsRootGeometrySupported() ) {
1719
1720       // Get shape
1721       Int_t nSlatType = 1;
1722       Int_t nVol = 8;
1723       char slatType[2] = "D"; // D: Rounde slat
1724       char volLetter[9] = "CNXIPHBG";
1725       char volName[5] = "SD9D";
1726       char compName[14] = "SD9D";
1727       char csName[16] = "rounded5SlatD9D";
1728       TGeoVolume *mVol = 0x0;
1729       // Beam shield recess
1730       new TGeoTube("tube5Cut", 0., AliMUONConstants::Rmin(4), kSlatWidth/2.+0.001);
1731       TObjArray rounded5Slat(nSlatType*((nVol+1)*2));
1732       // Displacement
1733       TGeoTranslation* trDTube5 = new TGeoTranslation("trDTube5", -(kPcbLength+kVframeLength)/2., -kYpos5[1], 0.);
1734       trDTube5->RegisterYourself();
1735       TObjArray composite5(nSlatType*((nVol+1)*2));
1736       new TGeoBBox("box5DCut",(kPcbLength+kVframeLength)/2., hFramepar[1], vFramepar[2]+0.001);
1737       // Displacement
1738       TGeoTranslation* trDBox5 = new TGeoTranslation("trDBox5",kPcbLength/2., kYpos5[1], 0.);
1739       trDBox5->RegisterYourself();
1740
1741       TGeoBBox *box5Vframe = new TGeoBBox("box5Vframe",vFramepar[0],vrFrameHeight/2., vFramepar[2]);
1742       TGeoTranslation* trVBox5 = new TGeoTranslation("trVBox5", 0., AliMUONConstants::Rmin(4)-kRframeLength + box5Vframe->GetDY(), 0.);
1743       trVBox5->RegisterYourself();
1744
1745       for(int iCh=9; iCh<=10; iCh++){
1746         for (int iSlatType = 0; iSlatType<nSlatType; iSlatType++) {
1747           for (int iVol = 0; iVol<nVol; iVol++){
1748             Int_t lIndex = (iCh-9)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+iVol;
1749             sprintf(volName,"S%c%d%c",slatType[iSlatType],iCh%10,volLetter[iVol]);
1750             mVol = gGeoManager->FindVolumeFast(volName);
1751             if ( !mVol ) {
1752               AliErrorStream()
1753                 << "Slat volume " << volName << " not found" << endl;
1754             }
1755             else {
1756               rounded5Slat[lIndex] = mVol->GetShape();
1757               sprintf(csName,"rounded5Slat%c%d%c",slatType[iSlatType],iCh%10,volLetter[iVol]);
1758               ((TGeoShape*)rounded5Slat[lIndex])->SetName(csName);
1759
1760               // Composite shape
1761               TString compOperation(csName);
1762               compOperation+="-tube5Cut:tr";
1763               compOperation+=slatType[iSlatType];
1764               compOperation+="Tube5";
1765               if (strstr(volName,"B")){
1766                 // Displacement
1767                 TGeoTranslation* trB = new TGeoTranslation("trB", 0., -(kPcbHeight - kBframeHeight)/2., 0.);
1768                 trB->RegisterYourself();
1769                 compOperation.ReplaceAll("-tube5Cut",":trB-tube5Cut");
1770               }
1771               sprintf(compName,"composite5%d%c",iCh,volLetter[iVol]);
1772               composite5[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1773
1774               // Reset shape to volume
1775               mVol->SetShape((TGeoShape*)composite5[lIndex]);
1776             }
1777           }
1778
1779           // For rounded spacer
1780           Int_t lIndex = (iCh-9)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+nVol;
1781           sprintf(volName,"S%c%dD",slatType[iSlatType],iCh%10);
1782           mVol = gGeoManager->FindVolumeFast(volName);
1783           if ( !mVol ) {
1784             AliErrorStream()
1785               << "Slat volume " << volName << " not found" << endl;
1786           }
1787           else {
1788             rounded5Slat[lIndex] = mVol->GetShape();
1789             sprintf(csName,"rounded5Slat%c%dD",slatType[iSlatType],iCh%10);
1790             ((TGeoShape*)rounded5Slat[lIndex])->SetName(csName);
1791
1792             // Composite shape
1793             TString compOperation(csName);
1794             if (strstr(volName,"SD")){
1795               compOperation.Prepend("(");
1796               compOperation+="+box5Vframe:trVBox5)*box5DCut:trDBox5";
1797             }
1798             sprintf(compName,"composite5%c%dD",slatType[iSlatType],iCh%10);
1799             composite5[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1800             // Reset shape to volume
1801             mVol->SetShape((TGeoShape*)composite5[lIndex]);
1802           }
1803         }
1804       }
1805     }
1806
1807     index = 0;
1808     for (i = 0; i < kNslats5; i++){
1809       for (Int_t quadrant = 1; quadrant <= 4; quadrant++) {
1810
1811         if (i == 0 && quadrant == 2) continue;
1812         if (i == 0 && quadrant == 4) continue;
1813
1814         sprintf(idSlatCh9,"LE%d",ConvertSlatNum(i,quadrant,kNslats5-1));
1815         sprintf(idSlatCh10,"LF%d",ConvertSlatNum(i,quadrant,kNslats5-1));
1816         Int_t moduleSlatCh9 = GetModuleId(idSlatCh9);
1817         Int_t moduleSlatCh10 = GetModuleId(idSlatCh10);
1818         Float_t xvFrame  = (slatLength5[i] - kVframeLength)/2.; // ok
1819
1820         // position the vertical frames (spacers)
1821         if (i != 1) {
1822           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1823           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1824           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1825           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1826         } else {  // Vertical and Rounded+Vertical spacer
1827           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1828           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9D", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos5[1],0.));
1829           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1830           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0D", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos5[1],0.));
1831         }
1832
1833         // position the panels and the insulating material
1834         for (j = 0; j < kNPCB5[i]; j++){
1835           index++;
1836           Float_t xx = kSensLength * (-kNPCB5[i]/2.+j+.5);
1837
1838           Float_t zPanel = spar[2] - nomexbpar[2];
1839           if (i==1 && j==0){ // Rounded pcb of rounded slat
1840             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1841             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel));
1842             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9I", idSlatCh9, index,TGeoTranslation(xx,0.,0.));
1843             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1844             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel));
1845             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0I", idSlatCh10, index,TGeoTranslation(xx,0.,0.));
1846           } else {
1847             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1848             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel));
1849             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09I", idSlatCh9, index,TGeoTranslation(xx,0.,0.));
1850
1851             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1852             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel));
1853             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10I", idSlatCh10, index,TGeoTranslation(xx,0.,0.));
1854           }
1855         }
1856       }
1857     }
1858
1859     // position the nomex volume inside the panel volume
1860     gMC->Gspos("S09N",1,"S09C",0.,0.,0.,0,"ONLY");
1861     gMC->Gspos("SD9N",1,"SD9C",0.,0.,0.,0,"ONLY");
1862     gMC->Gspos("S10N",1,"S10C",0.,0.,0.,0,"ONLY");
1863     gMC->Gspos("SD0N",1,"SD0C",0.,0.,0.,0,"ONLY");
1864
1865     // position panel  volume inside the bulk nomex material volume
1866     gMC->Gspos("S09C",1,"S09X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1867     gMC->Gspos("SD9C",1,"SD9X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1868     gMC->Gspos("S10C",1,"S10X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1869     gMC->Gspos("SD0C",1,"SD0X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1870
1871     // position the PCB volume inside the insulating material volume
1872     gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY");
1873     gMC->Gspos("SD9P",1,"SD9I",0.,0.,0.,0,"ONLY");
1874     gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY");
1875     gMC->Gspos("SD0P",1,"SD0I",0.,0.,0.,0,"ONLY");
1876
1877     // position the horizontal frame volume inside the PCB volume
1878     gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY");
1879     gMC->Gspos("SD9H",1,"SD9P",0.,0.,0.,0,"ONLY");
1880     gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY");
1881     gMC->Gspos("SD0H",1,"SD0P",0.,0.,0.,0,"ONLY");
1882
1883     // position the sensitive volume inside the horizontal frame volume
1884     gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3);
1885     gMC->Gspos("SD9G",1,"SD9H",0.,0.,0.,0,"ONLY");
1886     gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3);
1887     gMC->Gspos("SD0G",1,"SD0H",0.,0.,0.,0,"ONLY");
1888
1889     // position the border volumes inside the PCB volume
1890     Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.;
1891     gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY");
1892     gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY");
1893     gMC->Gspos("SD9B",1,"SD9P",0., 0.,0.,0,"ONLY");
1894     gMC->Gspos("S09B",1,"SD9P",0., yborder,0.,0,"ONLY");
1895     gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY");
1896     gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY");
1897     gMC->Gspos("SD0B",1,"SD0P",0., 0.,0.,0,"ONLY");
1898     gMC->Gspos("S10B",1,"SD0P",0., yborder,0.,0,"ONLY");
1899
1900     //      // create the NULOC volume and position it in the horizontal frame
1901
1902     gMC->Gsvolu("S09E","BOX",kNulocMaterial,nulocpar,3);
1903     gMC->Gsvolu("S10E","BOX",kNulocMaterial,nulocpar,3);
1904     index = 0;
1905     Float_t rPhi3 = TMath::ASin((kYpos5[1]-kPcbHeight/2.)/AliMUONConstants::Rmin(4));
1906     Float_t xxmax4 = (AliMUONConstants::Rmin(4)*TMath::Cos(rPhi3)-kVframeLength/2.) - (kBframeLength - kNulocLength)/2.;
1907     for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) {
1908       index++;
1909       gMC->Gspos("S09E",2*index-1,"S09B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1910       gMC->Gspos("S09E",2*index  ,"S09B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1911       gMC->Gspos("S10E",2*index-1,"S10B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1912       gMC->Gspos("S10E",2*index  ,"S10B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1913     }
1914     if (xx > xxmax4 && xx< xxmax) {
1915       gMC->Gspos("S09E",2*index-1,"SD9B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1916       gMC->Gspos("S09E",2*index  ,"SD9B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1917       gMC->Gspos("S10E",2*index-1,"SD0B", xx, -yborder,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1918       gMC->Gspos("S10E",2*index  ,"SD0B", xx, -yborder, kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1919     }
1920
1921     //
1922     //Geometry of the support pannel Verticla length 5.7m, horizontal length 2.6m, internal radius  dMotherInner o SC09 and SC10  (F. Orsini, Saclay)
1923     //Carbon fiber of 0.3 mm thick (2 layers) and a central layer of Nomex of 15mm thick.
1924     Float_t dMotherInner =  AliMUONConstants::Rmin(4)-kRframeHeight;
1925     Float_t nomexthickness = 1.5;
1926     Float_t carbonthickness = 0.03;
1927     Float_t supporthlength =  260.;
1928     Float_t supportvlength =  570.;
1929     // Generating the composite shape of the carbon and nomex pannels
1930     new TGeoBBox("shNomexBoxSt5",supporthlength/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
1931     new TGeoBBox("shCarbonBoxSt5",supporthlength/2., supportvlength/2. ,carbonthickness/2.);
1932     new TGeoTubeSeg("shNomexHoleSt5",0., dMotherInner, nomexthickness/2.+carbonthickness+3*kCableWidth+0.001, -90. ,90.);
1933     new TGeoTubeSeg("shCarbonHoleSt5",0., dMotherInner, carbonthickness/2.+0.001, -90. ,90.);
1934     TGeoTranslation* trHoleSt5 = new TGeoTranslation("trHoleSt5",-supporthlength/2.,0.,0.);
1935     trHoleSt5->RegisterYourself();
1936     TGeoCompositeShape* shNomexSupportSt5  = new TGeoCompositeShape("shNomexSupportSt5","shNomexBoxSt5-shNomexHoleSt5:trHoleSt5");
1937     TGeoCompositeShape* shCarbonSupportSt5 = new TGeoCompositeShape("shCarbonSupportSt5","shCarbonBoxSt5-shCarbonHoleSt5:trHoleSt5");
1938
1939    // Generating Nomex and Carbon pannel volumes
1940     TGeoVolume* voNomexSupportSt5  = new TGeoVolume("S09S", shNomexSupportSt5, kMedNomex);
1941     TGeoVolume* voCarbonSupportSt5 = new TGeoVolume("S09K", shCarbonSupportSt5, kMedCarbon);
1942     TGeoTranslation* trCarbon1St5   = new TGeoTranslation("trCarbon1St5",0.,0., -(nomexthickness+carbonthickness)/2.);
1943     TGeoTranslation* trCarbon2St5   = new TGeoTranslation("trCarbon2St5",0.,0.,  (nomexthickness+carbonthickness)/2.);
1944     voNomexSupportSt5->AddNode(voCarbonSupportSt5,1,trCarbon1St5);
1945     voNomexSupportSt5->AddNode(voCarbonSupportSt5,2,trCarbon2St5);
1946
1947     // Add readout cables
1948     gMC->Gsvolu("S09L","BOX",kCableMaterial,dum,0);
1949
1950     ySlat5 = 0.;
1951     Float_t lCableX = 0.;
1952     Float_t lCableY = 0.;
1953     Float_t lCableZ = 0.;
1954     Float_t cablepar[3] = {supporthlength/2., kCableHeight/2., kCableWidth/2.};
1955     Float_t lCableDY = 0.;
1956     for (i = 0; i<kNslats5; i++){
1957       Int_t iCable = 1;
1958       Int_t cIndex = 0;
1959       ySlat5 += kYpos5[i];
1960
1961       lCableY = ySlat5;
1962
1963       // Cables going out from the start of slat
1964       if(kNPCB5[i]>=4){ // Only if 4 or more pcb
1965         // First top cables
1966         cablepar[0] = (supporthlength-kXpos5[i])/2.;
1967         lCableX = kXpos5[i]/2.;
1968         if(i+1>=kNslats5 || i+2>=kNslats5){ // If no more higher slats, then use distance to lower slat
1969           lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
1970         }
1971         else {
1972           lCableDY = (kYpos5[i+1]+kYpos5[i+2])/2.-cablepar[1];
1973         }
1974         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
1975         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1976         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1977         // Then bottom cables
1978         if (i>0) {
1979           if (i==1) { // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
1980             cablepar[0] = (supporthlength-kXpos5[i]-dMotherInner)/2.;
1981             lCableX = (kXpos5[i]+dMotherInner)/2.;
1982             lCableDY = (kYpos5[i]+kYpos5[i])/2.-cablepar[1];
1983           }
1984           else {
1985             lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
1986             if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
1987               lCableDY = lCableY - dMotherInner - cablepar[1];
1988             }
1989           }
1990           gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
1991           gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
1992         }
1993       }
1994
1995       // Rounded slats have an extra cable starting at second pcb
1996       if(i==1){
1997         // Only on top
1998         cablepar[0] = (supporthlength-kPcbLength-kVframeLength)/2.;
1999         lCableX = (kPcbLength+kVframeLength)/2.;
2000         lCableDY = (kYpos5[i+1]+kYpos5[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
2001         lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
2002         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
2003         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
2004       }
2005
2006       // Cables going out from the end of the slats
2007       // First top cables
2008       cablepar[0] = (supporthlength-(slatLength5[i]+kXpos5[i]+kDslatLength)+kVframeLength)/2.;
2009       lCableX = slatLength5[i]+kXpos5[i]-kVframeLength+kDslatLength+cablepar[0]-supporthlength/2.;
2010       if(i+1>=kNslats5 || i+2>=kNslats5){ // If no more higher slats, then use distance to lower slat
2011         lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
2012       }
2013       else {
2014         lCableDY = (kYpos5[i+1]+kYpos5[i+2])/2.-cablepar[1];
2015       }
2016       lCableZ = TMath::Power(-1,i)*(nomexthickness+carbonthickness+(iCable++)*kCableWidth)/2.;
2017       gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
2018       gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
2019       if(i>0){
2020         if (i==1) { // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
2021           lCableDY = (kYpos5[i]+kYpos5[i])/2.-cablepar[1];
2022         }
2023         else {
2024           lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
2025           if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
2026               lCableDY = lCableY - dMotherInner - cablepar[1];
2027           }
2028         }
2029         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
2030         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
2031       }
2032     }
2033
2034     Float_t dzCh9  = dzCh;
2035     TGeoTranslation* trSupport1St5   = new TGeoTranslation("trSupport1St5", supporthlength/2., 0. , dzCh9);
2036     TGeoRotation*    roSupportSt5    = new TGeoRotation("roSupportSt5",90.,180.,-90.);
2037     TGeoCombiTrans*  coSupport2St5   = new TGeoCombiTrans(-supporthlength/2., 0., -dzCh9, roSupportSt5);
2038     GetEnvelopes(13)->AddEnvelope("S09S", 0, 1, *trSupport1St5);
2039     GetEnvelopes(12)->AddEnvelope("S09S", 0, 2, *coSupport2St5);
2040     GetEnvelopes(15)->AddEnvelope("S09S", 0, 3, *trSupport1St5);
2041     GetEnvelopes(14)->AddEnvelope("S09S", 0, 4, *coSupport2St5);
2042
2043
2044     // End of pannel support geometry
2045
2046     // cout << "Geometry for Station 5...... done" << endl;
2047
2048   }
2049
2050   delete [] fStations;
2051
2052 }
2053
2054
2055 //______________________________________________________________________________
2056 void AliMUONSlatGeometryBuilder::SetTransformations()
2057 {
2058 /// Defines the transformations for the station345 chambers.
2059
2060   if (gAlice->GetModule("DIPO")) {
2061     // if DIPO is preset, the whole station will be placed in DDIP volume
2062     SetMotherVolume(4, "DDIP");
2063     SetMotherVolume(5, "DDIP");
2064     SetMotherVolume(6, "DDIP");
2065     SetMotherVolume(7, "DDIP");
2066   }
2067   SetVolume(4, "SC05I", true);
2068   SetVolume(5, "SC05O", true);
2069   SetVolume(6, "SC06I", true);
2070   SetVolume(7, "SC06O", true);
2071
2072   if (gAlice->GetModule("SHIL")) {
2073     SetMotherVolume(8, "YOUT2");
2074     SetMotherVolume(9, "YOUT2");
2075     SetMotherVolume(10, "YOUT2");
2076     SetMotherVolume(11, "YOUT2");
2077     SetMotherVolume(12, "YOUT2");
2078     SetMotherVolume(13, "YOUT2");
2079     SetMotherVolume(14, "YOUT2");
2080     SetMotherVolume(15, "YOUT2");
2081   }
2082
2083   SetVolume( 8, "SC07I", true);
2084   SetVolume( 9, "SC07O", true);
2085   SetVolume(10, "SC08I", true);
2086   SetVolume(11, "SC08O", true);
2087   SetVolume(12, "SC09I", true);
2088   SetVolume(13, "SC09O", true);
2089   SetVolume(14, "SC10I", true);
2090   SetVolume(15, "SC10O", true);
2091
2092 // Stations 345 are not perpendicular to the beam axis
2093 // See AliMUONConstants class
2094   TGeoRotation st345inclination("rot99");
2095   st345inclination.RotateX(AliMUONConstants::St345Inclination());
2096
2097 // The rotation of the half-chamber is done with respect the center of the chamber.
2098 // the distance beween the roation axis and the chamber position is
2099 // AliMUONConstants::DzCh()+AliMUONConstants::DzSlat()
2100 // Therefore the position of the half-chamber has to be corrected by a traslation in Z and Y axis
2101   Double_t deltaY = (AliMUONConstants::DzCh()+AliMUONConstants::DzSlat())*
2102     TMath::Sin(AliMUONConstants::St345Inclination() * TMath::Pi()/180.);
2103   Double_t deltaZ = (AliMUONConstants::DzCh()+AliMUONConstants::DzSlat())*
2104     (1.-TMath::Cos(AliMUONConstants::St345Inclination() * TMath::Pi()/180.));
2105
2106
2107   Double_t zpos1= - AliMUONConstants::DefaultChamberZ(4);
2108   SetTransformation(4, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2109   SetTransformation(5, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2110
2111   zpos1= - AliMUONConstants::DefaultChamberZ(5);
2112   SetTransformation(6, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2113   SetTransformation(7, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2114
2115   zpos1 = - AliMUONConstants::DefaultChamberZ(6);
2116   SetTransformation(8, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2117   SetTransformation(9, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2118
2119   zpos1 = - AliMUONConstants::DefaultChamberZ(7);
2120   SetTransformation(10, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination );
2121   SetTransformation(11, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination );
2122
2123   zpos1 = - AliMUONConstants::DefaultChamberZ(8);
2124   SetTransformation(12, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2125   SetTransformation(13, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2126
2127   zpos1 = - AliMUONConstants::DefaultChamberZ(9);
2128   SetTransformation(14, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2129   SetTransformation(15, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2130
2131 }
2132
2133 //______________________________________________________________________________
2134 void AliMUONSlatGeometryBuilder::SetSensitiveVolumes()
2135 {
2136 /// Defines the sensitive volumes for slat stations chambers.
2137
2138   GetGeometry( 4)->SetSensitiveVolume("S05G");
2139   GetGeometry( 4)->SetSensitiveVolume("SC5G");
2140   GetGeometry( 4)->SetSensitiveVolume("SD5G");
2141   GetGeometry( 5)->SetSensitiveVolume("S05G");
2142   GetGeometry( 5)->SetSensitiveVolume("SC5G");
2143   GetGeometry( 5)->SetSensitiveVolume("SD5G");
2144   GetGeometry( 6)->SetSensitiveVolume("S06G");
2145   GetGeometry( 6)->SetSensitiveVolume("SC6G");
2146   GetGeometry( 6)->SetSensitiveVolume("SD6G");
2147   GetGeometry( 7)->SetSensitiveVolume("S06G");
2148   GetGeometry( 7)->SetSensitiveVolume("SC6G");
2149   GetGeometry( 7)->SetSensitiveVolume("SD6G");
2150   GetGeometry( 8)->SetSensitiveVolume("S07G");
2151   GetGeometry( 8)->SetSensitiveVolume("SD7G");
2152   GetGeometry( 9)->SetSensitiveVolume("S07G");
2153   GetGeometry( 9)->SetSensitiveVolume("SD7G");
2154   GetGeometry(10)->SetSensitiveVolume("S08G");
2155   GetGeometry(10)->SetSensitiveVolume("SD8G");
2156   GetGeometry(11)->SetSensitiveVolume("S08G");
2157   GetGeometry(11)->SetSensitiveVolume("SD8G");
2158   GetGeometry(12)->SetSensitiveVolume("S09G");
2159   GetGeometry(12)->SetSensitiveVolume("SD9G");
2160   GetGeometry(13)->SetSensitiveVolume("S09G");
2161   GetGeometry(13)->SetSensitiveVolume("SD9G");
2162   GetGeometry(14)->SetSensitiveVolume("S10G");
2163   GetGeometry(14)->SetSensitiveVolume("SD0G");
2164   GetGeometry(15)->SetSensitiveVolume("S10G");
2165   GetGeometry(15)->SetSensitiveVolume("SD0G");
2166 }
2167
2168 //______________________________________________________________________________
2169 Int_t  AliMUONSlatGeometryBuilder::ConvertSlatNum(Int_t numslat, Int_t quadnum, Int_t fspq) const
2170 {
2171 /// On-line function establishing the correspondance between numslat (the slat number on a particular quadrant (numslat->0....4 for St3))
2172 /// and slatnum (the slat number on the whole panel (slatnum->1...18 for St3)
2173   numslat += 1;
2174   if (quadnum==2 || quadnum==3)
2175     numslat += fspq;
2176   else
2177     numslat = fspq + 2-numslat;
2178   numslat -= 1;
2179
2180   if (quadnum==3 || quadnum==4) numslat += 2*fspq+1;
2181
2182   return numslat;
2183 }