1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
18 ///////////////////////////////////////////////////////////////////////////////
20 /// This is the base class for reading raw data.
22 /// The derived classes, which operate on concrete raw data formats,
24 /// - ReadHeader to read the next (data/equipment) header
25 /// - ReadNextData to read the next raw data block (=1 DDL)
26 /// - ReadNext to read a given number of bytes
27 /// - several getters like GetType
29 /// Sequential access to the raw data is provided by the methods
30 /// ReadHeader, ReadNextData, ReadNextInt, ReadNextShort, ReadNextChar
32 /// If only data from a specific detector (and a given range of DDL numbers)
33 /// should be read, this can be achieved by the Select method.
34 /// Several getters provide information about the current event and the
35 /// current type of raw data.
37 ///////////////////////////////////////////////////////////////////////////////
39 #include <Riostream.h>
40 #include "AliRawReader.h"
43 ClassImp(AliRawReader)
46 AliRawReader::AliRawReader() :
47 fEquipmentIdsIn(NULL),
48 fEquipmentIdsOut(NULL),
49 fRequireHeader(kTRUE),
52 fSelectEquipmentType(-1),
53 fSelectMinEquipmentId(-1),
54 fSelectMaxEquipmentId(-1),
59 // default constructor: initialize data members
62 Bool_t AliRawReader::LoadEquipmentIdsMap(const char *fileName)
64 // Open the mapping file
65 // and load the mapping data
66 ifstream input(fileName);
67 if (input.is_open()) {
68 Warning("AliRawReader","Equipment ID mapping file is found !");
69 const Int_t kMaxDDL = 256;
70 fEquipmentIdsIn = new TArrayI(kMaxDDL);
71 fEquipmentIdsOut = new TArrayI(kMaxDDL);
72 Int_t equipIn, equipOut;
74 while (input >> equipIn >> equipOut) {
75 if (nIds >= kMaxDDL) {
76 Error("AliRawReader","Too many equipment Id mappings found ! Truncating the list !");
79 fEquipmentIdsIn->AddAt(equipIn,nIds);
80 fEquipmentIdsOut->AddAt(equipOut,nIds);
83 fEquipmentIdsIn->Set(nIds);
84 fEquipmentIdsOut->Set(nIds);
89 Error("AliRawReader","equipment id map file is not found ! Skipping the mapping !");
94 AliRawReader::AliRawReader(const AliRawReader& rawReader) :
96 fEquipmentIdsIn(rawReader.fEquipmentIdsIn),
97 fEquipmentIdsOut(rawReader.fEquipmentIdsOut),
98 fRequireHeader(rawReader.fRequireHeader),
99 fHeader(rawReader.fHeader),
100 fCount(rawReader.fCount),
101 fSelectEquipmentType(rawReader.fSelectEquipmentType),
102 fSelectMinEquipmentId(rawReader.fSelectMinEquipmentId),
103 fSelectMaxEquipmentId(rawReader.fSelectMaxEquipmentId),
104 fSkipInvalid(rawReader.fSkipInvalid),
105 fSelectEventType(rawReader.fSelectEventType),
111 AliRawReader& AliRawReader::operator = (const AliRawReader& rawReader)
113 // assignment operator
114 fEquipmentIdsIn = rawReader.fEquipmentIdsIn;
115 fEquipmentIdsOut = rawReader.fEquipmentIdsOut;
117 fHeader = rawReader.fHeader;
118 fCount = rawReader.fCount;
120 fSelectEquipmentType = rawReader.fSelectEquipmentType;
121 fSelectMinEquipmentId = rawReader.fSelectMinEquipmentId;
122 fSelectMaxEquipmentId = rawReader.fSelectMaxEquipmentId;
123 fSkipInvalid = rawReader.fSkipInvalid;
124 fSelectEventType = rawReader.fSelectEventType;
126 fErrorCode = rawReader.fErrorCode;
131 AliRawReader::~AliRawReader()
134 // delete the mapping arrays if
136 if (fEquipmentIdsIn) delete fEquipmentIdsIn;
137 if (fEquipmentIdsOut) delete fEquipmentIdsOut;
140 Int_t AliRawReader::GetMappedEquipmentId() const
142 if (!fEquipmentIdsIn || !fEquipmentIdsOut) {
143 Error("AliRawReader","equipment Ids mapping is not initialized !");
144 return GetEquipmentId();
146 Int_t equipmentId = GetEquipmentId();
147 for(Int_t iId = 0; iId < fEquipmentIdsIn->GetSize(); iId++) {
148 if (equipmentId == fEquipmentIdsIn->At(iId)) {
149 equipmentId = fEquipmentIdsOut->At(iId);
156 Int_t AliRawReader::GetDetectorID() const
158 // Get the detector ID
159 // The list of detector IDs
160 // can be found in AliDAQConfig.h
162 if (fEquipmentIdsIn && fEquipmentIdsIn)
163 equipmentId = GetMappedEquipmentId();
165 equipmentId = GetEquipmentId();
167 if (equipmentId >= 0)
168 return (equipmentId >> 8);
173 Int_t AliRawReader::GetDDLID() const
175 // Get the DDL ID (within one sub-detector)
176 // The list of detector IDs
177 // can be found in AliDAQConfig.h
179 if (fEquipmentIdsIn && fEquipmentIdsIn)
180 equipmentId = GetMappedEquipmentId();
182 equipmentId = GetEquipmentId();
184 if (equipmentId >= 0)
185 return (equipmentId & 0xFF);
190 void AliRawReader::Select(Int_t detectorID, Int_t minDDLID, Int_t maxDDLID)
192 // read only data of the detector with the given ID and in the given
193 // range of DDLs (minDDLID <= DDLID <= maxDDLID).
194 // no selection is applied if a value < 0 is used.
196 fSelectEquipmentType = -1;
197 if (minDDLID < 0) minDDLID = 0;
198 fSelectMinEquipmentId = (detectorID << 8) + minDDLID;
199 if (maxDDLID < 0) maxDDLID = 0xFF;
200 fSelectMaxEquipmentId = (detectorID << 8) + maxDDLID;
203 void AliRawReader::SelectEquipment(Int_t equipmentType,
204 Int_t minEquipmentId, Int_t maxEquipmentId)
206 // read only data of the equipment with the given type and in the given
207 // range of IDs (minEquipmentId <= EquipmentId <= maxEquipmentId).
208 // no selection is applied if a value < 0 is used.
210 fSelectEquipmentType = equipmentType;
211 fSelectMinEquipmentId = minEquipmentId;
212 fSelectMaxEquipmentId = maxEquipmentId;
215 void AliRawReader::SelectEvents(Int_t type)
217 // read only events with the given type.
218 // no selection is applied if a value < 0 is used.
220 fSelectEventType = type;
223 Bool_t AliRawReader::IsSelected() const
225 // apply the selection (if any)
227 if (fSkipInvalid && !IsValid()) return kFALSE;
229 if (fSelectEquipmentType >= 0)
230 if (GetEquipmentType() != fSelectEquipmentType) return kFALSE;
233 if (fEquipmentIdsIn && fEquipmentIdsIn)
234 equipmentId = GetMappedEquipmentId();
236 equipmentId = GetEquipmentId();
238 if ((fSelectMinEquipmentId >= 0) &&
239 (equipmentId < fSelectMinEquipmentId))
241 if ((fSelectMaxEquipmentId >= 0) &&
242 (equipmentId > fSelectMaxEquipmentId))
248 Bool_t AliRawReader::IsEventSelected() const
250 // apply the event selection (if any)
252 if (fSelectEventType >= 0) {
253 if (GetType() != (UInt_t) fSelectEventType) return kFALSE;
260 Bool_t AliRawReader::ReadNextInt(UInt_t& data)
262 // reads the next 4 bytes at the current position
263 // returns kFALSE if the data could not be read
265 while (fCount == 0) {
266 if (!ReadHeader()) return kFALSE;
268 if (fCount < (Int_t) sizeof(data)) {
270 "too few data left (%d bytes) to read an UInt_t!", fCount);
273 if (!ReadNext((UChar_t*) &data, sizeof(data))) {
274 Error("ReadNextInt", "could not read data!");
280 Bool_t AliRawReader::ReadNextShort(UShort_t& data)
282 // reads the next 2 bytes at the current position
283 // returns kFALSE if the data could not be read
285 while (fCount == 0) {
286 if (!ReadHeader()) return kFALSE;
288 if (fCount < (Int_t) sizeof(data)) {
289 Error("ReadNextShort",
290 "too few data left (%d bytes) to read an UShort_t!", fCount);
293 if (!ReadNext((UChar_t*) &data, sizeof(data))) {
294 Error("ReadNextShort", "could not read data!");
300 Bool_t AliRawReader::ReadNextChar(UChar_t& data)
302 // reads the next 1 byte at the current stream position
303 // returns kFALSE if the data could not be read
305 while (fCount == 0) {
306 if (!ReadHeader()) return kFALSE;
308 if (!ReadNext((UChar_t*) &data, sizeof(data))) {
309 Error("ReadNextChar", "could not read data!");
316 Int_t AliRawReader::CheckData() const
318 // check the consistency of the data
319 // derived classes should overwrite the default method which returns 0 (no err)
325 void AliRawReader::DumpData(Int_t limit)
327 // print the raw data
328 // if limit is not negative, only the first and last "limit" lines of raw data
333 Error("DumpData", "no header");
337 " type = %d run = %d ", GetType(), GetRunNumber());
339 printf("event = %8.8x %8.8x\n", GetEventId()[1], GetEventId()[0]);
341 printf("event = -------- --------\n");
343 if (GetTriggerPattern()) {
344 printf(" trigger = %8.8x %8.8x ",
345 GetTriggerPattern()[1], GetTriggerPattern()[0]);
347 printf(" trigger = -------- -------- ");
349 if (GetDetectorPattern()) {
350 printf("detector = %8.8x\n", GetDetectorPattern()[0]);
352 printf("detector = --------\n");
354 if (GetAttributes()) {
355 printf(" attributes = %8.8x %8.8x %8.8x ",
356 GetAttributes()[2], GetAttributes()[1], GetAttributes()[0]);
358 printf(" attributes = -------- -------- -------- ");
360 printf("GDC = %d\n", GetGDCId());
364 printf("-------------------------------------------------------------------------------\n");
365 printf("LDC = %d\n", GetLDCId());
367 printf("equipment:\n"
368 " size = %d type = %d id = %d\n",
369 GetEquipmentSize(), GetEquipmentType(), GetEquipmentId());
370 if (GetEquipmentAttributes()) {
371 printf(" attributes = %8.8x %8.8x %8.8x ", GetEquipmentAttributes()[2],
372 GetEquipmentAttributes()[1], GetEquipmentAttributes()[0]);
374 printf(" attributes = -------- -------- -------- ");
376 printf("element size = %d\n", GetEquipmentElementSize());
378 printf("data header:\n"
379 " size = %d version = %d valid = %d compression = %d\n",
380 GetDataSize(), GetVersion(), IsValid(), IsCompressed());
383 if (limit == 0) continue;
385 Int_t size = GetDataSize();
387 for (Int_t i = 0; i < 70; i++) line[i] = ' ';
393 for (Int_t n = 0; n < size; n++) {
394 if (!ReadNextChar(byte)) {
395 Error("DumpData", "couldn't read byte number %d\n", n);
399 printf("%8.8x %s\n", n-pos, line);
400 for (Int_t i = 0; i < 70; i++) line[i] = ' ';
403 if ((limit > 0) && (n/max == limit)) {
404 Int_t nContinue = ((size-1)/max+1-limit) * max;
406 printf(" [skipping %d bytes]\n", nContinue-n);
412 Int_t offset = pos/4;
413 if ((byte > 0x20) && (byte < 0x7f)) {
414 line[pos+offset] = byte;
416 line[pos+offset] = '.';
419 sprintf(hex, "%2.2x", byte);
420 line[max+max/4+3+2*pos+offset] = hex[0];
421 line[max+max/4+4+2*pos+offset] = hex[1];
425 if (pos > 0) printf("%8.8x %s\n", size-pos, line);
428 } while (ReadHeader());