1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
16 /* $Id: AliPIPEupgrade.cxx 56360 2012-August */
18 //-------------------------------------------------------------------------
20 // This version uses TGeo
22 //-------------------------------------------------------------------------
25 #include <Riostream.h>
27 #include <TGeoCompositeShape.h>
29 #include <TGeoGlobalMagField.h>
30 #include <TGeoManager.h>
31 #include <TGeoMatrix.h>
33 #include <TGeoTorus.h>
35 #include <TGeoVolume.h>
38 #include <TVirtualMC.h>
41 #include "AliPIPEupgrade.h"
45 ClassImp(AliPIPEupgrade)
48 //_____________________________________________________________________________
49 AliPIPEupgrade::AliPIPEupgrade(Option_t *opt) :
50 fBeamBackground(0), fConeIsBe(1), fIpPipeRo(0.), fIpPipeWidth(0.), fIpHLength(0.)
54 // Initialization of detector dimensions from TGeo
55 if(strstr(opt,"TGeo")){
57 AliError("Geometry is not initialized\n");
61 v = gGeoManager->GetVolume("IP_PIPE");
63 AliError("TGeo volume IP_PIPE not found \n");
66 TGeoTube *t=(TGeoTube*)v->GetShape();
67 // printf(" rmin %lf rmax %lf dz %lf\n",t->GetRmin(),t->GetRmax(),t->GetDz());
68 fIpPipeRo = t->GetRmax();
69 fIpPipeWidth = t->GetRmax()-t->GetRmin();
70 fIpHLength = t->GetDz();
75 //_____________________________________________________________________________
76 AliPIPEupgrade::AliPIPEupgrade(Bool_t coneIsBe, Float_t ro, Float_t width, Float_t hlength) :
77 fBeamBackground(0), fConeIsBe(coneIsBe), fIpPipeRo(ro), fIpPipeWidth(width), fIpHLength(hlength)
82 //_____________________________________________________________________________
83 AliPIPEupgrade::AliPIPEupgrade(const char *name, const char *title,
84 Bool_t coneIsBe, Float_t ro, Float_t width, Float_t hlength) :
85 AliPIPE(name,title), fBeamBackground(0), fConeIsBe(coneIsBe), fIpPipeRo(ro), fIpPipeWidth(width), fIpHLength(hlength)
91 //___________________________________________
92 void AliPIPEupgrade::CreateGeometry()
95 // Method describing the beam pipe geometry
97 AliDebug(1,"Create PIPEupgrade geometry");
98 Float_t dz, z, zsh, z0;
102 const Float_t kDegRad = TMath::Pi() / 180.;
103 // Rotation by 180 deg
104 TGeoRotation* rot180 = new TGeoRotation("rot180", 90., 180., 90., 90., 180., 0.);
105 TGeoRotation* rotyz = new TGeoRotation("rotyz", 90., 180., 0., 180., 90., 90.);
106 TGeoRotation* rotxz = new TGeoRotation("rotxz", 0., 0., 90., 90., 90., 180.);
107 TGeoRotation* rot045 = new TGeoRotation("rot045", 90., 45., 90., 135., 0., 0.);
108 TGeoRotation* rot135 = new TGeoRotation("rot135", 90. ,135., 90., 225., 0., 0.);
109 TGeoRotation* rot225 = new TGeoRotation("rot225", 90. ,225., 90., 315., 0., 0.);
110 TGeoRotation* rot315 = new TGeoRotation("rot315", 90. ,315., 90., 45., 0., 0.);
113 const TGeoMedium* kMedAir = gGeoManager->GetMedium("PIPE_AIR");
114 const TGeoMedium* kMedAirHigh = gGeoManager->GetMedium("PIPE_AIR_HIGH");
115 const TGeoMedium* kMedVac = gGeoManager->GetMedium("PIPE_VACUUM");
116 const TGeoMedium* kMedVacM = gGeoManager->GetMedium("PIPE_VACUUMM");
117 const TGeoMedium* kMedInsu = gGeoManager->GetMedium("PIPE_INS_C0");
118 const TGeoMedium* kMedSteel = gGeoManager->GetMedium("PIPE_INOX");
119 const TGeoMedium* kMedBe = gGeoManager->GetMedium("PIPE_BE");
120 const TGeoMedium* kMedAlu = gGeoManager->GetMedium("PIPE_ALU");
121 const TGeoMedium* kMedCu = gGeoManager->GetMedium("PIPE_CU");
122 const TGeoMedium* kMedAco = gGeoManager->GetMedium("PIPE_ANTICORODAL");
125 TGeoVolume* top = gGeoManager->GetVolume("ALIC");
128 ////////////////////////////////////////////////////////////////////////////////
130 // The Central Vacuum system //
132 ////////////////////////////////////////////////////////////////////////////////
135 // The ALICE central beam-pipe according to drawing LHCVC2C_0001
136 // Drawings of sub-elements:
138 // Pos 7 - Minimised Flange: LHCVFX_P0025
139 // Pos 6 - Standard Flange: STDVFUHV0009
140 // Pos 8 - Bellow: LHCVBX__0001
142 // Absolute z-coordinates -82.0 - 400.0 cm
143 // Total length: 482.0 cm
144 // It consists of 3 main parts:
145 // CP/2 The flange on the non-absorber side: 36.5 cm
146 // CP/1 The central Be pipe: 405.0 cm
147 // CP/3 The double-bellow and flange on the absorber side: 40.5 cm
152 // Starting position in z
153 const Float_t kCPz0 = -400.0;
154 // Length of the CP/1 section
155 const Float_t kCP1Length = 405.0;
156 // Length of the CP/2 section
157 const Float_t kCP2Length = 36.5;
158 // Length of the CP/3 section
159 const Float_t kCP3Length = 40.5;
160 // Position of the CP/2 section
161 // const Float_t kCP2pos = kCPz0 + kCP2Length / 2.;
162 // Position of the CP/3 section
163 const Float_t kCP3pos = kCPz0 + kCP2Length + kCP1Length + kCP3Length/2.;
169 // Inner and outer radii of the Be-section [Pos 1]
172 // Be-Stainless Steel adaptor tube [Pos 2] at both ends of the Be-section. Length 5 cm
175 // Bulge of the Be-Stainless Steel adaptor Tube [Pos 2]
182 // CP/1 Mother volume
183 //TGeoVolume* voCp1Mo = new TGeoVolume("CP1MO", new TGeoTube(0., kCP1BeStRo, kCP1Length / 2.), kMedAir);
184 Double_t beamPipeLength = 553.8;//482.0; //552.0;
185 TGeoVolume* voCp1Mo = new TGeoVolume("CP1MO", new TGeoTube(0., 3.6, beamPipeLength/2.), kMedVac);
186 // voCp1Mo->SetVisibility(0);
187 voCp1Mo->SetVisibility(kVac);
190 TGeoVolumeAssembly* voCp1 = new TGeoVolumeAssembly("Cp1");
192 voCp1->AddNode(voCp1Mo, 1, new TGeoTranslation(0.,0,-34));
193 // voCp1->AddNode(voCp1Mo, 1, gGeoIdentity);
196 // CP/1 Mother Volume
198 TGeoPcon* shCp1Mo = new TGeoPcon(0., 360., 6);
201 z = - kCP2Length / 2.;
202 shCp1Mo->DefineSection( 0, z, kCP2FixedFlangeRi, kCP2FixedFlangeRo);
203 z += kCP2FixedFlangeRecessLengths[0];
204 shCp1Mo->DefineSection( 1, z, kCP2FixedFlangeRi, kCP2FixedFlangeRo);
205 shCp1Mo->DefineSection( 2, z, 0., kCP2FixedFlangeRo);
206 z += (kCP2FixedFlangeRecessLengths[1] + kCP2FixedFlangeRecessLengths[2]) ;
207 shCp1Mo->DefineSection( 3, z, 0., kCP2FixedFlangeRo);
208 // Straight section between Flange and Fixed Point
209 shCp1Mo->DefineSection( 4, z, 0., kCP2FixedFlangeBulgeRo);
210 z += kCP2FixedFlangeBulgeLength;
211 shCp1Mo->DefineSection( 5, z, 0., kCP2FixedFlangeBulgeRo);
212 shCp2Mo->DefineSection( 6, z, 0., kCP2StRo);
213 z = - kCP2Length / 2 + kCP2FixedPointZ - kCP2FixedPointLength / 2.;
214 shCp2Mo->DefineSection( 7, z, 0., kCP2StRo);
217 TGeoVolume* voCp2Mo = new TGeoVolume("CP2MO", shCp2Mo, kMedAir);
226 // Fixed Point tube [Pos 5]
228 // Inner and outer radii of the Stainless Steel pipe
229 const Float_t kCP2StRi = 2.90;
230 const Float_t kCP2StRo = 2.98;
232 // Transition to central Be-pipe (Bulge)
234 const Float_t kCP2BulgeLength = 0.80;
236 // Bulge outer radius
237 const Float_t kCP2BulgeRo = 3.05;
239 // Fixed Point at z = 391.7 (IP)
241 // Position of fixed point
242 const Float_t kCP2FixedPointZ = 8.30;
244 // Outer radius of fixed point
245 const Float_t kCP2FixedPointRo = 3.50;
247 // Length of fixed point
248 const Float_t kCP2FixedPointLength = 0.60;
250 // Fixed Flange [Pos 6]
252 // Fixed flange outer radius
253 const Float_t kCP2FixedFlangeRo = 7.60;
255 // Fixed flange inner radius
256 const Float_t kCP2FixedFlangeRi = 3.00;
257 // Fixed flange inner radius bulge
259 // Fixed flange lengths of sections at inner radius
260 const Float_t kCP2FixedFlangeRecessLengths[3] ={1., 0.08, 0.9};
261 // Fixed flange length
264 // Fixed flange bulge
266 const Float_t kCP2FixedFlangeBulgeRo = 3.00;
269 const Float_t kCP2FixedFlangeBulgeLength = 2.00;
272 // CP/2 Mother Volume
274 TGeoPcon* shCp2Mo = new TGeoPcon(0., 360., 14);
277 z = - kCP2Length / 2.;
278 shCp2Mo->DefineSection( 0, z, kCP2FixedFlangeRi, kCP2FixedFlangeRo);
279 z += kCP2FixedFlangeRecessLengths[0];
280 shCp2Mo->DefineSection( 1, z, kCP2FixedFlangeRi, kCP2FixedFlangeRo);
281 shCp2Mo->DefineSection( 2, z, 0., kCP2FixedFlangeRo);
282 z += (kCP2FixedFlangeRecessLengths[1] + kCP2FixedFlangeRecessLengths[2]) ;
283 shCp2Mo->DefineSection( 3, z, 0., kCP2FixedFlangeRo);
284 // Straight section between Flange and Fixed Point
285 shCp2Mo->DefineSection( 4, z, 0., kCP2FixedFlangeBulgeRo);
286 z += kCP2FixedFlangeBulgeLength;
287 shCp2Mo->DefineSection( 5, z, 0., kCP2FixedFlangeBulgeRo);
288 shCp2Mo->DefineSection( 6, z, 0., kCP2StRo);
289 z = - kCP2Length / 2 + kCP2FixedPointZ - kCP2FixedPointLength / 2.;
290 shCp2Mo->DefineSection( 7, z, 0., kCP2StRo);
293 shCp2Mo->DefineSection( 8, z, 0., kCP2FixedPointRo);
294 z += kCP2FixedPointLength;
295 shCp2Mo->DefineSection( 9, z, 0., kCP2FixedPointRo);
297 // Straight section between Fixed Point and transition bulge
298 shCp2Mo->DefineSection(10, z, 0., 2.98);
299 z = kCP2Length / 2. - kCP2BulgeLength;
300 shCp2Mo->DefineSection(11, z, 0., 3.6);//2.98
301 shCp2Mo->DefineSection(12, z, 0., 3.6);
303 shCp2Mo->DefineSection(13, z, 0., 3.6);
305 TGeoVolume* voCp2Mo = new TGeoVolume("CP2MO", shCp2Mo, kMedAir);
309 /////////////////////////////////////////////////////////////
310 // CP/2 Beam pipe with fixed point and transition bulges //
311 /////////////////////////////////////////////////////////////
312 TGeoPcon* shCp2Pi = new TGeoPcon(0., 360., 10);
313 // Bulge at transition to flange
314 z = - (kCP2Length - kCP2FixedFlangeRecessLengths[0] - kCP2FixedFlangeRecessLengths[1]) / 2.;
316 shCp2Pi->DefineSection(0, z, kCP2StRi, kCP2FixedFlangeBulgeRo);
317 z += kCP2FixedFlangeBulgeLength;
318 shCp2Pi->DefineSection(1, z, kCP2StRi, kCP2FixedFlangeBulgeRo);
319 // Straight section between Bulge and Fixed Point
320 shCp2Pi->DefineSection(2, z, kCP2StRi, kCP2StRo);
321 z += (kCP2FixedPointZ - kCP2FixedPointLength / 2. - kCP2FixedFlangeRecessLengths[0]
322 - kCP2FixedFlangeRecessLengths[1] -
323 kCP2FixedFlangeBulgeLength);
324 shCp2Pi->DefineSection(3, z, kCP2StRi, kCP2StRo);
326 shCp2Pi->DefineSection(4, z, kCP2StRi, kCP2FixedPointRo);
327 z += kCP2FixedPointLength;
328 shCp2Pi->DefineSection(5, z, kCP2StRi, kCP2FixedPointRo);
329 // Straight section between Fixed Point and transition bulge
330 shCp2Pi->DefineSection(6, z, kCP2StRi, kCP2StRo);
331 z = - shCp2Pi->GetZ(0) - kCP2BulgeLength;
332 shCp2Pi->DefineSection(7, z, kCP2StRi, kCP2StRo);
333 // Bulge at transition to Be pipe
334 shCp2Pi->DefineSection(8, z, kCP2StRi, kCP2BulgeRo);
335 z = - shCp2Pi->GetZ(0);
336 shCp2Pi->DefineSection(9, z, kCP2StRi, kCP2BulgeRo);
338 // Beam Pipe Protection Tube
342 // Plaque de Centrage ALIFWDA_0019
343 const Float_t kFwdaBPPTXL = 3.;
344 TGeoXtru* shFwdaBPPTX = new TGeoXtru(2);
345 Double_t xBPPTX[8] = {12.5, 7.5, -7.5, -12.5, -12.5, -7.5, 7.5, 12.5};
346 Double_t yBPPTX[8] = { 7.0, 12.0, 12.0, 7.0, -7.0, -12.0, -12.0, -7.0};
347 shFwdaBPPTX->DefinePolygon(8, xBPPTX, yBPPTX);
348 shFwdaBPPTX->DefineSection(0, 0., 0., 0., 1.);
349 shFwdaBPPTX->DefineSection(1, kFwdaBPPTXL, 0., 0., 1.);
350 shFwdaBPPTX->SetName("FwdaBPPTX");
351 TGeoTube* shFwdaBPPTY = new TGeoTube(0., 8.5, 3.2);
352 shFwdaBPPTY->SetName("FwdaBPPTY");
353 TGeoCompositeShape* shFwdaBPPTPC = new TGeoCompositeShape("shFwdaBPPTPC", "FwdaBPPTX-FwdaBPPTY");
354 TGeoVolume* voFwdaBPPTPC = new TGeoVolume("FwdaBPPTPC", shFwdaBPPTPC, kMedAco);
357 // const Float_t kFwdaBPPTTL = 48.;
358 const Float_t kFwdaBPPTTL = 35.;
359 TGeoVolume* voFwdaBPPTT = new TGeoVolume("FwdaBPPTT", new TGeoTube(8.85, 9.0, kFwdaBPPTTL/2.), kMedAco);
360 TGeoVolumeAssembly* voFwdaBPPT = new TGeoVolumeAssembly("FwdaBPPT");
361 voFwdaBPPT->AddNode(voFwdaBPPTPC, 1, gGeoIdentity);
362 voFwdaBPPT->AddNode(voFwdaBPPTT, 1, new TGeoTranslation(0., 0., kFwdaBPPTTL/2. + kFwdaBPPTXL));
365 // BeamPipe and T0A Support
369 // Support Plate ALIFWDA_0026
370 const Float_t kFwdaBPSPL = 4.0;
371 TGeoXtru* shFwdaBPSPX = new TGeoXtru(2);
372 Double_t xBPSPX[8] = {10.0, 6.0 , -6.0, -10.0, -10.0, -6.0, 6.0, 10.0};
373 Double_t yBPSPX[8] = { 6.0, 10.0, 10.0, 6.0, - 6.0, -10.0, -10.0, -6.0};
374 shFwdaBPSPX->DefinePolygon(8, xBPSPX, yBPSPX);
375 shFwdaBPSPX->DefineSection(0, 0., 0., 0., 1.);
376 shFwdaBPSPX->DefineSection(1, kFwdaBPSPL, 0., 0., 1.);
377 shFwdaBPSPX->SetName("FwdaBPSPX");
378 TGeoPcon* shFwdaBPSPY = new TGeoPcon(0., 360., 6);
379 shFwdaBPSPY->DefineSection(0, -1.00, 0., 5.5);
380 shFwdaBPSPY->DefineSection(1, 3.50, 0., 5.5);
381 shFwdaBPSPY->DefineSection(2, 3.50, 0., 5.0);
382 shFwdaBPSPY->DefineSection(3, 3.86, 0., 5.0);
383 shFwdaBPSPY->DefineSection(4, 3.86, 0., 5.5);
384 shFwdaBPSPY->DefineSection(5, 5.00, 0., 5.5);
385 shFwdaBPSPY->SetName("FwdaBPSPY");
386 TGeoCompositeShape* shFwdaBPSP = new TGeoCompositeShape("shFwdaBPSP", "FwdaBPSPX-FwdaBPSPY");
387 TGeoVolume* voFwdaBPSP = new TGeoVolume("FwdaBPSP", shFwdaBPSP, kMedAco);
389 // Flasque ALIFWDA_00027
392 const Float_t kFwdaBPSTTRi = 7.6/2.;
393 const Float_t kFwdaBPSTTRo1 = 13.9/2.;
394 const Float_t kFwdaBPSTTRo2 = 8.2/2.;
395 const Float_t kFwdaBPSTTRo3 = 9.4/2.;
397 TGeoPcon* shFwdaBPSFL = new TGeoPcon(0., 360., 8);
399 shFwdaBPSFL->DefineSection(0, z, kFwdaBPSTTRi, kFwdaBPSTTRo1);
401 shFwdaBPSFL->DefineSection(1, z, kFwdaBPSTTRi, kFwdaBPSTTRo1);
402 shFwdaBPSFL->DefineSection(2, z, kFwdaBPSTTRi, kFwdaBPSTTRo2);
404 shFwdaBPSFL->DefineSection(3, z, kFwdaBPSTTRi, kFwdaBPSTTRo2);
405 shFwdaBPSFL->DefineSection(4, z, kFwdaBPSTTRi, kFwdaBPSTTRo3);
407 shFwdaBPSFL->DefineSection(5, z, kFwdaBPSTTRi, kFwdaBPSTTRo3);
408 shFwdaBPSFL->DefineSection(6, z, kFwdaBPSTTRi, kFwdaBPSTTRo2);
410 shFwdaBPSFL->DefineSection(7, z, kFwdaBPSTTRi, kFwdaBPSTTRo2);
412 TGeoVolume* voFwdaBPSFL = new TGeoVolume("FwdaBPSFL", shFwdaBPSFL, kMedAco);
417 TGeoBBox* shFwdaBPSCSa = new TGeoBBox(3.0, 8.75, 0.5);
418 shFwdaBPSCSa->SetName("FwdaBPSCSa");
419 TGeoBBox* shFwdaBPSCSb = new TGeoBBox(1.25, 4.00, 1.0);
420 shFwdaBPSCSb->SetName("FwdaBPSCSb");
421 TGeoTranslation* tFwdaBPSCSb = new TGeoTranslation(0., 5.25 - 8.75, 0.);
422 tFwdaBPSCSb->SetName("tFwdaBPSCSb");
423 tFwdaBPSCSb->RegisterYourself();
424 TGeoBBox* shFwdaBPSCSc = new TGeoBBox(3.0, 0.50, 0.70);
425 shFwdaBPSCSc->SetName("FwdaBPSCSc");
426 TGeoTranslation* tFwdaBPSCSc = new TGeoTranslation(0., 0.5 - 8.75, 1.2);
427 tFwdaBPSCSc->SetName("tFwdaBPSCSc");
428 tFwdaBPSCSc->RegisterYourself();
429 TGeoCompositeShape* shFwdaBPSCS = new TGeoCompositeShape("shFwdaBPSCS", "(FwdaBPSCSa-FwdaBPSCSb:tFwdaBPSCSb)+FwdaBPSCSc:tFwdaBPSCSc");
430 TGeoVolume* voFwdaBPSCS = new TGeoVolume("FwdaBPSCS", shFwdaBPSCS, kMedAco);
433 // Assembling the beam pipe support
434 TGeoVolumeAssembly* voFwdaBPS = new TGeoVolumeAssembly("FwdaBPS");
435 voFwdaBPS->AddNode(voFwdaBPSP, 1, new TGeoCombiTrans(0., 0., 0., rot045));
436 voFwdaBPS->AddNode(voFwdaBPSFL, 1, new TGeoTranslation(0., 0., kFwdaBPSPL));
437 const Float_t kFwdaBPSCSdy = 18.75/TMath::Sqrt(2.);
439 voFwdaBPS->AddNode(voFwdaBPSCS, 1, new TGeoCombiTrans(- kFwdaBPSCSdy, kFwdaBPSCSdy, 2., rot045));
440 voFwdaBPS->AddNode(voFwdaBPSCS, 2, new TGeoCombiTrans(- kFwdaBPSCSdy, - kFwdaBPSCSdy, 2., rot135));
441 voFwdaBPS->AddNode(voFwdaBPSCS, 3, new TGeoCombiTrans( kFwdaBPSCSdy, - kFwdaBPSCSdy, 2., rot225));
442 voFwdaBPS->AddNode(voFwdaBPSCS, 4, new TGeoCombiTrans( kFwdaBPSCSdy, kFwdaBPSCSdy, 2., rot315));
444 TGeoVolumeAssembly* voCp2 = new TGeoVolumeAssembly("CP2");
445 voCp2->AddNode(voCp2Mo, 1, gGeoIdentity);
446 voCp2->AddNode(voFwdaBPPT, 1, new TGeoTranslation(0., 0., -kCP2Length / 2. + 13.8));
447 voCp2->AddNode(voFwdaBPS, 1, new TGeoTranslation(0., 0., -kCP2Length / 2. + 5.1));
450 // Assemble the central beam pipe
452 Double_t CP2Length = 36.5+68;
453 TGeoVolumeAssembly* asCP = new TGeoVolumeAssembly("CP");
455 asCP->AddNode(voCp2, 1, new TGeoTranslation(0., 0., z));
456 z += kCP2Length / 2. + kCP1Length / 2.+CP2Length;
457 asCP->AddNode(voCp1, 1, new TGeoTranslation(0., 0., z));
458 top->AddNode(asCP, 1, new TGeoCombiTrans(0., 0., 400. - kCP2Length / 2, rot180));
460 //edit part for upgrade
462 // position shift dzS+161 and dyS =15
463 Float_t dzS = 161+34, dyS = 0; //15;
467 TGeoMaterial *matAl = new TGeoMaterial("Al",26.98,13,2.7);
468 TGeoMaterial *matBe = new TGeoMaterial("Be",9.01,4,1.85);
470 TGeoMedium *Alu = new TGeoMedium("Root Material",2,matAl);
471 TGeoMedium *Be = new TGeoMedium("Materail",3,matBe);
474 //Create interactoin point in center path with Be
475 Double_t origIPHlength = 57.25; // from drawing
476 Double_t ro=fIpPipeRo, width=fIpPipeWidth, zLength = origIPHlength*2;
477 TGeoVolume *ipPipe = gGeoManager->MakeTube("IP_PIPE",(TGeoMedium*)kMedBe,ro-width,ro,zLength/2.);
478 ipPipe->SetLineColor(kBe);
479 voCp1Mo->AddNode(ipPipe,3,new TGeoTranslation(0,dyS,dzS));
481 //Create C-side section Length 24.65 cm
482 Double_t cyl1Length = 15.6;
483 Double_t cylLength = 2.0;
484 Double_t bellowLength = 3.8;
485 // TGeoVolume* voCylVac = new TGeoVolume("cylVAC", new TGeoTube(0., ro-width,cylLength / 2.), kMedVac);
486 // voCylVac->SetLineColor(kVac);
487 TGeoVolume* cyl = new TGeoVolume("cyl", new TGeoTube(ro-width, ro, cylLength / 2.), kMedAlu);
488 // cyl->AddNode(voCylVac, 1, gGeoIdentity);
489 cyl->SetLineColor(kAlu);
490 voCp1Mo->AddNode(cyl,1,new TGeoTranslation(0.,dyS,dzS+zLength/2+cylLength/2));
491 voCp1Mo->AddNode(cyl,2,new TGeoTranslation(0.,dyS,dzS+zLength/2+cylLength+bellowLength + cylLength/2));
492 voCp1Mo->AddNode(cyl,3,new TGeoTranslation(0.,dyS,dzS+zLength/2+cyl1Length-cylLength/2 -bellowLength -cylLength));
493 voCp1Mo->AddNode(cyl,4,new TGeoTranslation(0.,dyS,dzS+zLength/2+cyl1Length-cylLength/2));
496 Double_t cyl2Length = 1.0;
497 Double_t cone1Length = 9.05-cyl2Length;
498 TGeoVolume *cone1 = gGeoManager->MakeCone("cone1",(TGeoMedium*)kMedAlu, cone1Length/2, 3.-width,3., ro-width,ro);
499 cone1->SetLineColor(kAlu);
500 TGeoRotation *rot1 = new TGeoRotation("rot1",0.,180.,0.); // not needed
501 TGeoCombiTrans *combi1 = new TGeoCombiTrans(0,dyS,dzS+zLength/2+cyl1Length+cone1Length/2,rot1);
502 voCp1Mo->AddNode(cone1,2,combi1);
504 TGeoVolume *cyl2 = gGeoManager->MakeTube("cyl2",(TGeoMedium*)kMedAlu,3.-width,3.5, cyl2Length/2);
505 cyl2->SetLineColor(kAlu);
506 voCp1Mo->AddNode(cyl2,2,new TGeoTranslation(0.,dyS,dzS+zLength/2+cyl1Length+cone1Length+cyl2Length/2));
509 // Adaptor tube [Pos 4]
511 // Adptor tube length
512 const Float_t kCP3AdaptorTubeLength = 5.5;//5.50;
514 // Inner and outer radii
515 // const Float_t kCP3AdaptorTubeRo = ro;
517 // Bulge at transition point
518 // Inner and outer radii
520 const Float_t kCP3AdaptorTubeBulgeRo = 3.05;
528 const Float_t kCP3BellowLength = 7.8; //13// Don,t understand why I use this value
530 const Float_t kCP3BellowRo = ro+0.5;
532 const Float_t kCP3BellowRi = ro-width;
534 const Int_t kCP3NumberOfPlies = 6; //18;
535 // Length of undulated region
536 const Float_t kCP3BellowUndulatedLength = 3.8; //8.30;
538 const Float_t kCP3PlieThickness = 0.02;
539 // Connection Plie radies (at transition been undulated region and beam pipe)
540 const Float_t kCP3ConnectionPlieR = 0.21;
542 // const Float_t kCP3PlieR = 0.118286;
543 const Float_t kCP3PlieR =
544 (kCP3BellowUndulatedLength - 4. * kCP3ConnectionPlieR + 2. * kCP3PlieThickness +
545 (2. * kCP3NumberOfPlies - 2.) * kCP3PlieThickness) / (4. * kCP3NumberOfPlies - 2.);
547 // Length of connection pipe
548 const Float_t kCP3BellowConnectionLength = 2.0;
549 const Float_t kCP3BellowConnectionLengthI = 2.0;
550 const Float_t kCP3BellowConnectionLengthII = 4.0;
552 // Tube between bellows [Pos 3]
555 const Float_t kCP3TubeLength = 4.00;
557 // Minimised fixed flange [Pos 7]
559 // Length of flange connection tube
560 const Float_t kCP3FlangeConnectorLength = 2.0-0.08;//5.0 - 1.4;//ตัวเชื่à¸à¸¡ 20
564 const Float_t kCP3FlangeRo = 4.30;
567 // CP/3 Mother volume
569 TGeoPcon* shCp3Mo = new TGeoPcon(0., 360., 12);
570 // From transition to first bellow
571 z = - kCP3Length / 2.;
572 shCp3Mo->DefineSection( 0, z, 0., kCP3AdaptorTubeBulgeRo);
573 z += kCP3BellowConnectionLength + kCP3AdaptorTubeLength;
574 shCp3Mo->DefineSection( 1, z, 0., kCP3AdaptorTubeBulgeRo);
576 shCp3Mo->DefineSection( 2, z, 0., kCP3BellowRo);
577 z += kCP3BellowUndulatedLength;
578 shCp3Mo->DefineSection( 3, z, 0., kCP3BellowRo);
579 // Connection between the two bellows
580 shCp3Mo->DefineSection( 4, z, 0., kCP3AdaptorTubeBulgeRo);
581 z += 2. * kCP3BellowConnectionLength + kCP3TubeLength;
582 shCp3Mo->DefineSection( 5, z, 0., kCP3AdaptorTubeBulgeRo);
584 shCp3Mo->DefineSection( 6, z, 0., kCP3BellowRo);
585 z += kCP3BellowUndulatedLength;
586 shCp3Mo->DefineSection( 7, z, 0., kCP3BellowRo);
587 // Pipe between second Bellow and Flange
588 shCp3Mo->DefineSection( 8, z, 0., kCP3AdaptorTubeBulgeRo);
589 z += kCP3BellowConnectionLength + kCP3FlangeConnectorLength;
590 shCp3Mo->DefineSection( 9, z, 0., kCP3AdaptorTubeBulgeRo);
592 shCp3Mo->DefineSection(10, z, 0., kCP3FlangeRo);
593 z = -shCp3Mo->GetZ(0);
594 shCp3Mo->DefineSection(11, z, 0., kCP3FlangeRo);
596 TGeoVolume* voCp3Mo = new TGeoVolume("CP3MO", shCp3Mo, kMedAir);
597 voCp3Mo->SetVisibility(0);
599 TGeoVolumeAssembly* voCp3 = new TGeoVolumeAssembly("Cp3");
600 voCp3->AddNode(voCp3Mo, 1, gGeoIdentity);//edit undulator volume
604 ////////////////////////////////////////
605 // Add Bellow section in C-side //
606 ////////////////////////////////////////
609 // Upper part of the undulation
610 TGeoTorus* plieTorusUO = new TGeoTorus(kCP3BellowRo - kCP3PlieR, 0. , kCP3PlieR);
611 plieTorusUO->SetName("TorusUO");
612 TGeoTorus* plieTorusUI = new TGeoTorus(kCP3BellowRo - kCP3PlieR, kCP3PlieR - kCP3PlieThickness, kCP3PlieR);
613 plieTorusUI->SetName("TorusUI");
614 TGeoTube* plieTubeU = new TGeoTube (kCP3BellowRo - kCP3PlieR, kCP3BellowRo, kCP3PlieR);
615 plieTubeU->SetName("TubeU");
617 TGeoCompositeShape* shUpperPlieO = new TGeoCompositeShape("upperPlieO", "TorusUO*TubeU");
618 TGeoCompositeShape* shUpperPlieI = new TGeoCompositeShape("upperPlieI", "TorusUI*TubeU");
620 TGeoVolume* voWiggleUO = new TGeoVolume("CP3WUO", shUpperPlieO, kMedVac);
621 TGeoVolume* voWiggleUI = new TGeoVolume("CP3WUI", shUpperPlieI, (TGeoMedium*)kMedAlu);
622 voWiggleUO->AddNode(voWiggleUI, 1, gGeoIdentity);//edit
623 voWiggleUI->SetLineColor(kAlu);//edit
625 // Lower part of the undulation
626 TGeoTorus* plieTorusLO = new TGeoTorus(kCP3BellowRi + kCP3PlieR, 0. , kCP3PlieR);
627 plieTorusLO->SetName("TorusLO");
628 TGeoTorus* plieTorusLI = new TGeoTorus(kCP3BellowRi + kCP3PlieR, kCP3PlieR - kCP3PlieThickness, kCP3PlieR);
629 plieTorusLI->SetName("TorusLI");
630 TGeoTube* plieTubeL = new TGeoTube (kCP3BellowRi, kCP3BellowRi + kCP3PlieR, kCP3PlieR);
631 plieTubeL->SetName("TubeL");
633 TGeoCompositeShape* shLowerPlieO = new TGeoCompositeShape("lowerPlieO", "TorusLO*TubeL");
634 TGeoCompositeShape* shLowerPlieI = new TGeoCompositeShape("lowerPlieI", "TorusLI*TubeL");
636 TGeoVolume* voWiggleLO = new TGeoVolume("CP3WLO", shLowerPlieO, kMedVac);
637 TGeoVolume* voWiggleLI = new TGeoVolume("CP3WLI", shLowerPlieI, (TGeoMedium*)kMedAlu);
638 voWiggleLO->AddNode(voWiggleLI, 1, gGeoIdentity);//edit
639 voWiggleLI->SetLineColor(kAlu);//edit
641 // Connection between upper and lower part of undulation
642 TGeoVolume* voWiggleC1 = new TGeoVolume("Q3WCO1",
643 new TGeoTube(kCP3BellowRi + kCP3PlieR, kCP3BellowRo - kCP3PlieR, kCP3PlieThickness / 2.),
645 TGeoVolume* voWiggleC2 = new TGeoVolume("Q3WCO2",
646 new TGeoTube(kCP3BellowRi + kCP3ConnectionPlieR, kCP3BellowRo - kCP3PlieR, kCP3PlieThickness / 2.),
649 // Conncetion between undulated section and beam pipe
650 TGeoTorus* plieTorusCO = new TGeoTorus(kCP3BellowRi + kCP3ConnectionPlieR, 0. , kCP3ConnectionPlieR);
651 plieTorusCO->SetName("TorusCO");
652 TGeoTorus* plieTorusCI = new TGeoTorus(kCP3BellowRi + kCP3ConnectionPlieR, kCP3ConnectionPlieR - kCP3PlieThickness, kCP3ConnectionPlieR);
653 plieTorusCI->SetName("TorusCI");
654 TGeoTube* plieTubeC = new TGeoTube (kCP3BellowRi, kCP3BellowRi + kCP3ConnectionPlieR, kCP3ConnectionPlieR);
655 plieTubeC->SetName("TubeC");
657 TGeoCompositeShape* shConnectionPlieO = new TGeoCompositeShape("connectionPlieO", "TorusCO*TubeC");
658 TGeoCompositeShape* shConnectionPlieI = new TGeoCompositeShape("connectionPlieI", "TorusCI*TubeC");
660 TGeoVolume* voConnectionPO = new TGeoVolume("CP3CPO", shConnectionPlieO, kMedVac);
661 TGeoVolume* voConnectionPI = new TGeoVolume("CP3CPI", shConnectionPlieI, (TGeoMedium*)kMedAlu);
662 voConnectionPO->AddNode(voConnectionPI, 1, gGeoIdentity);
663 voConnectionPI->SetLineColor(kAlu);
667 TGeoPcon* shBellowMotherPC = new TGeoPcon(0., 360., 2);
668 dz = - kCP3BellowLength / 2;
669 // shBellowMotherPC->DefineSection(0, dz, 0., kCP3AdaptorTubeRo);
670 dz += kCP3BellowConnectionLength;
671 // shBellowMotherPC->DefineSection(1, dz, 0., kCP3AdaptorTubeRo);
672 shBellowMotherPC->DefineSection(0, dz, 0., kCP3BellowRo);
673 dz = kCP3BellowLength /2. - kCP3BellowConnectionLength;;
674 shBellowMotherPC->DefineSection(1, dz, 0., kCP3BellowRo);
675 // shBellowMotherPC->DefineSection(4, dz, 0., kCP3AdaptorTubeRo);
676 dz += kCP3BellowConnectionLength;
677 // shBellowMotherPC->DefineSection(5, dz, 0., kCP3AdaptorTubeRo);
679 TGeoVolume* voBellowMother = new TGeoVolume("CP1BeMO", shBellowMotherPC, kMedVac);
680 voBellowMother->SetVisibility(20);
685 z0 = - kCP3BellowLength / 2. + kCP3BellowConnectionLength + 2. * kCP3ConnectionPlieR - kCP3PlieThickness;
686 zsh = 4. * kCP3PlieR - 2. * kCP3PlieThickness;
687 for (Int_t iw = 0; iw < 6; iw++) {
688 Float_t zpos = z0 + iw * zsh;
690 voBellowMother->AddNode(voWiggleC1, iw + 1 , new TGeoTranslation(0., 0.,zpos + kCP3PlieThickness / 2.));
692 voBellowMother->AddNode(voWiggleC2, iw + 1 , new TGeoTranslation(0., 0.,zpos + kCP3PlieThickness / 2.));
695 voBellowMother->AddNode(voWiggleUO, iw + 1, new TGeoTranslation(0., 0., zpos));
699 voBellowMother->AddNode(voWiggleC1, iw + 7, new TGeoTranslation(0., 0.,zpos - kCP3PlieThickness / 2.));
701 voBellowMother->AddNode(voWiggleC2, iw + 7, new TGeoTranslation(0., 0.,zpos - kCP3PlieThickness / 2.));
705 voBellowMother->AddNode(voWiggleLO, iw + 1, new TGeoTranslation(0., 0. ,zpos - kCP3PlieThickness));
710 // Add connecting undulation between bellow and connecting pipe
711 dz = - kCP3BellowUndulatedLength / 2. + kCP3ConnectionPlieR;
712 voBellowMother->AddNode(voConnectionPO, 1, new TGeoTranslation(0., 0., dz ));
713 voBellowMother->AddNode(voConnectionPO, 2, new TGeoTranslation(0., 0., -dz ));
716 // Add bellow to CP/3 mother
717 Double_t dz1 = dzS+zLength/2+ kCP3BellowConnectionLengthI/2;
718 voCp1Mo->AddNode(voBellowMother,1, new TGeoTranslation(0., dyS , dz1 + kCP3BellowUndulatedLength/2 + kCP3BellowConnectionLengthI/2 ));
719 voCp1Mo->AddNode(voBellowMother,1, new TGeoTranslation(0., dyS , dz1 +kCP3BellowUndulatedLength + kCP3BellowUndulatedLength/2 + kCP3BellowConnectionLengthI/2 + kCP3BellowConnectionLengthII ));
723 //Create A-side conical section
724 Double_t lengthFromIp = 410.85;//342.85;//410.85;
725 Double_t cyl3Length = 1.0, cone3Length = 9.05;
726 Double_t cone2Length = lengthFromIp-cone3Length-cyl3Length;
728 TGeoMedium *med = (TGeoMedium*)kMedAlu; if (fConeIsBe) med = (TGeoMedium*)kMedBe;
729 TGeoVolume *cone2 = gGeoManager->MakeCone("cone2",med,cone2Length/2,2.26-width,2.26,ro-width,ro);
731 cone2->SetLineColor(kBe);
733 cone2->SetLineColor(kAlu);
734 voCp1Mo->AddNode(cone2,2,new TGeoTranslation(0,dyS,dzS-zLength/2-cone2Length/2));
736 TGeoVolume *cone3 = gGeoManager->MakeCone("cone3",(TGeoMedium*)kMedAlu,cone3Length/2,3.-width,3.,2.26-width,2.26);
737 cone3->SetLineColor(kAlu);
738 voCp1Mo->AddNode(cone3,2,new TGeoTranslation(0,dyS,dzS-zLength/2-cone2Length-cone3Length/2));
740 TGeoVolume *cyl3 = gGeoManager->MakeTube("cyl3",(TGeoMedium*)kMedAlu,3.0-width,3.5, cyl3Length/2);
741 cyl3->SetLineColor(kAlu);
742 voCp1Mo->AddNode(cyl3,2,new TGeoTranslation(0.,dyS,dzS-zLength/2-cone2Length-cone3Length-cyl3Length/2));
745 TGeoVolume *ip = gGeoManager->MakeTube("ip",Alu,3.0-width,3.5, 0.1);
746 ip->SetLineColor(kAlu);
747 voCp1Mo->AddNode(ip,2,new TGeoTranslation(0.,dyS,dzS));
750 // Assemble voFwdaBPPT
752 voCp2->AddNode(voFwdaBPPT, 1, new TGeoTranslation(0., 0., -kCP2Length / 2. + 13.8 ));//edit volume 1
753 voCp2->AddNode(voFwdaBPS, 1, new TGeoTranslation(0., 0., -kCP2Length / 2. + 5.1 ));
755 printf("THE END ------------------------ \n");
761 ////////////////////////////////////////////////////////////////////////////////
765 ////////////////////////////////////////////////////////////////////////////////
768 // Drawing LHCVC2U_0001
769 // Copper Tube RB24/1 393.5 cm
770 // Warm module VMACA 18.0 cm
771 // Annular Ion Pump 35.0 cm
773 // Warm module VMABC 28.0 cm
774 // ================================
779 // Copper Tube RB24/1
780 const Float_t kRB24CuTubeL = 393.5;
781 const Float_t kRB24CuTubeRi = 8.0/2.;
782 const Float_t kRB24CuTubeRo = 8.4/2.;
783 const Float_t kRB24CuTubeFRo = 7.6;
784 const Float_t kRB24CuTubeFL = 1.86;
786 TGeoVolume* voRB24CuTubeM = new TGeoVolume("voRB24CuTubeM",
787 new TGeoTube(0., kRB24CuTubeRo, kRB24CuTubeL/2.), kMedVac);
788 voRB24CuTubeM->SetVisibility(0);
789 TGeoVolume* voRB24CuTube = new TGeoVolume("voRB24CuTube",
790 new TGeoTube(kRB24CuTubeRi, kRB24CuTubeRo, kRB24CuTubeL/2.), kMedCu);
791 voRB24CuTubeM->AddNode(voRB24CuTube, 1, gGeoIdentity);
792 // Air outside tube with higher transport cuts
793 TGeoVolume* voRB24CuTubeA = new TGeoVolume("voRB24CuTubeA",
794 new TGeoTube(25., 100., kRB24CuTubeL/2.), kMedAirHigh);
795 voRB24CuTubeA->SetVisibility(0);
796 // Simplified DN 100 Flange
797 TGeoVolume* voRB24CuTubeF = new TGeoVolume("voRB24CuTubeF",
798 new TGeoTube(kRB24CuTubeRo, kRB24CuTubeFRo, kRB24CuTubeFL/2.), kMedSteel);
800 // Warm Module Type VMACA
803 // Pos 1 Warm Bellows DN100 LHCVBU__0012
804 // Pos 2 RF Contact D80 LHCVSR__0005
805 // Pos 3 Trans. Tube Flange LHCVSR__0065
806 // [Pos 4 Hex. Countersunk Screw Bossard BN4719]
807 // [Pos 5 Tension spring LHCVSR__0011]
811 // Pos1 Warm Bellows DN100
812 // Pos1.1 Bellows LHCVBU__0006
816 // Connection tube inner r
817 const Float_t kRB24B1ConTubeRin = 10.0/2.;
818 // Connection tube outer r
819 const Float_t kRB24B1ConTubeRou = 10.3/2.;
820 // Connection tube length
821 const Float_t kRB24B1ConTubeL = 2.5;
823 const Float_t kRB24B1CompL = 16.00; // Length of the compensator
824 const Float_t kRB24B1BellowRi = 10.25/2.; // Bellow inner radius
825 const Float_t kRB24B1BellowRo = 11.40/2.; // Bellow outer radius
826 const Int_t kRB24B1NumberOfPlies = 27; // Number of plies
827 const Float_t kRB24B1BellowUndL = 11.00; // Length of undulated region
828 const Float_t kRB24B1PlieThickness = 0.015; // Plie thickness
830 const Float_t kRB24B1PlieRadius =
831 (kRB24B1BellowUndL + (2. * kRB24B1NumberOfPlies - 2.) * kRB24B1PlieThickness) / (4. * kRB24B1NumberOfPlies);
833 const Float_t kRB24B1ProtTubeThickness = 0.02; // Thickness of the protection tube
834 const Float_t kRB24B1ProtTubeLength = 4.2; // Length of the protection tube
836 const Float_t kRB24B1RFlangeL = 1.86; // Length of the flanges
837 const Float_t kRB24B1RFlangeLO = 0.26; // Flange overlap
838 const Float_t kRB24B1RFlangeRO = 11.18/2; // Inner radius at Flange overlap
839 const Float_t kRB24B1RFlangeRou = 15.20/2.; // Outer radius of flange
840 const Float_t kRB24B1RFlangeRecess = 0.98; // Flange recess
841 const Float_t kRB24B1L = kRB24B1CompL + 2. * (kRB24B1RFlangeL - kRB24B1RFlangeRecess);
845 // Bellow mother volume
846 TGeoPcon* shRB24B1BellowM = new TGeoPcon(0., 360., 14);
847 // Connection Tube and Flange
849 shRB24B1BellowM->DefineSection( 0, z, 0., kRB24B1RFlangeRou);
850 z += kRB24B1RFlangeLO;
851 shRB24B1BellowM->DefineSection( 1, z, 0., kRB24B1RFlangeRou);
852 shRB24B1BellowM->DefineSection( 2, z, 0., kRB24B1RFlangeRou);
854 shRB24B1BellowM->DefineSection( 3, z, 0., kRB24B1RFlangeRou);
855 shRB24B1BellowM->DefineSection( 4, z, 0., kRB24B1ConTubeRou);
856 z = kRB24B1ConTubeL + kRB24B1RFlangeL - kRB24B1RFlangeRecess;
857 shRB24B1BellowM->DefineSection( 5, z, 0., kRB24B1ConTubeRou);
859 shRB24B1BellowM->DefineSection( 6, z, 0., kRB24B1BellowRo + kRB24B1ProtTubeThickness);
860 z += kRB24B1BellowUndL;
861 shRB24B1BellowM->DefineSection( 7, z, 0., kRB24B1BellowRo + kRB24B1ProtTubeThickness);
862 shRB24B1BellowM->DefineSection( 8, z, 0., kRB24B1ConTubeRou);
863 // Connection Tube and Flange
864 z = kRB24B1L - shRB24B1BellowM->GetZ(3);
865 shRB24B1BellowM->DefineSection( 9, z, 0., kRB24B1ConTubeRou);
866 shRB24B1BellowM->DefineSection(10, z, 0., kRB24B1RFlangeRou);
867 z = kRB24B1L - shRB24B1BellowM->GetZ(1);
868 shRB24B1BellowM->DefineSection(11, z, 0., kRB24B1RFlangeRou);
869 shRB24B1BellowM->DefineSection(12, z, 0., kRB24B1RFlangeRou);
870 z = kRB24B1L - shRB24B1BellowM->GetZ(0);
871 shRB24B1BellowM->DefineSection(13, z, 0., kRB24B1RFlangeRou);
873 TGeoVolume* voRB24B1BellowM = new TGeoVolume("RB24B1BellowM", shRB24B1BellowM, kMedVac);
874 voRB24B1BellowM->SetVisibility(0);
877 TGeoVolume* voRB24B1Bellow
878 = MakeBellow("RB24B1", kRB24B1NumberOfPlies, kRB24B1BellowRi, kRB24B1BellowRo,
879 kRB24B1BellowUndL, kRB24B1PlieRadius ,kRB24B1PlieThickness);
880 voRB24B1Bellow->SetVisibility(0);
883 // End Parts (connection tube)
884 TGeoVolume* voRB24B1CT = new TGeoVolume("RB24B1CT", new TGeoTube(kRB24B1ConTubeRin, kRB24B1ConTubeRou, kRB24B1ConTubeL/2.), kMedSteel);
887 TGeoVolume* voRB24B1PT = new TGeoVolume("RB24B1PT", new TGeoTube(kRB24B1BellowRo, kRB24B1BellowRo + kRB24B1ProtTubeThickness,
888 kRB24B1ProtTubeLength / 2.), kMedSteel);
890 z = kRB24B1ConTubeL/2. + (kRB24B1RFlangeL - kRB24B1RFlangeRecess);
892 voRB24B1BellowM->AddNode(voRB24B1CT, 1, new TGeoTranslation(0., 0., z));
893 z += (kRB24B1ConTubeL/2.+ kRB24B1BellowUndL/2.);
894 voRB24B1BellowM->AddNode(voRB24B1Bellow, 1, new TGeoTranslation(0., 0., z));
895 z += (kRB24B1BellowUndL/2. + kRB24B1ConTubeL/2);
896 voRB24B1BellowM->AddNode(voRB24B1CT, 2, new TGeoTranslation(0., 0., z));
897 z = kRB24B1ConTubeL + kRB24B1ProtTubeLength / 2. + 1. + kRB24B1RFlangeLO;
898 voRB24B1BellowM->AddNode(voRB24B1PT, 1, new TGeoTranslation(0., 0., z));
899 z += kRB24B1ProtTubeLength + 0.6;
900 voRB24B1BellowM->AddNode(voRB24B1PT, 2, new TGeoTranslation(0., 0., z));
904 // Pos 1/2 Rotatable Flange LHCVBU__0013
905 // Pos 1/3 Flange DN100/103 LHCVBU__0018
906 // The two flanges can be represented by the same volume
907 // Outer Radius (including the outer movable ring).
908 // The inner ring has a diameter of 12.04 cm
911 TGeoPcon* shRB24B1RFlange = new TGeoPcon(0., 360., 10);
913 shRB24B1RFlange->DefineSection(0, z, 10.30/2., kRB24B1RFlangeRou);
914 z += 0.55; // 5.5 mm added for outer ring
916 shRB24B1RFlange->DefineSection(1, z, 10.30/2., kRB24B1RFlangeRou);
917 shRB24B1RFlange->DefineSection(2, z, 10.06/2., kRB24B1RFlangeRou);
919 shRB24B1RFlange->DefineSection(3, z, 10.06/2., kRB24B1RFlangeRou);
920 // In reality this part is rounded
921 shRB24B1RFlange->DefineSection(4, z, 10.91/2., kRB24B1RFlangeRou);
923 shRB24B1RFlange->DefineSection(5, z, 10.91/2., kRB24B1RFlangeRou);
924 shRB24B1RFlange->DefineSection(6, z, 10.06/2., kRB24B1RFlangeRou);
926 shRB24B1RFlange->DefineSection(7, z, 10.06/2., kRB24B1RFlangeRou);
927 shRB24B1RFlange->DefineSection(8, z, kRB24B1RFlangeRO, kRB24B1RFlangeRou);
928 z += kRB24B1RFlangeLO;
929 shRB24B1RFlange->DefineSection(9, z, kRB24B1RFlangeRO, kRB24B1RFlangeRou);
931 TGeoVolume* voRB24B1RFlange = new TGeoVolume("RB24B1RFlange", shRB24B1RFlange, kMedSteel);
934 z = kRB24B1L - kRB24B1RFlangeL;
935 voRB24B1BellowM->AddNode(voRB24B1RFlange, 1, new TGeoTranslation(0., 0., z));
937 voRB24B1BellowM->AddNode(voRB24B1RFlange, 2, new TGeoCombiTrans(0., 0., z, rot180));
939 // Pos 2 RF Contact D80 LHCVSR__0005
941 // Pos 2.1 RF Contact Flange LHCVSR__0003
943 TGeoPcon* shRB24B1RCTFlange = new TGeoPcon(0., 360., 6);
944 const Float_t kRB24B1RCTFlangeRin = 8.06/2. + 0.05; // Inner radius
945 const Float_t kRB24B1RCTFlangeL = 1.45; // Length
948 shRB24B1RCTFlange->DefineSection(0, z, kRB24B1RCTFlangeRin, 8.20/2.);
950 shRB24B1RCTFlange->DefineSection(1, z, kRB24B1RCTFlangeRin, 8.20/2.);
951 shRB24B1RCTFlange->DefineSection(2, z, kRB24B1RCTFlangeRin, 8.60/2.);
953 shRB24B1RCTFlange->DefineSection(3, z, kRB24B1RCTFlangeRin, 8.60/2.);
954 shRB24B1RCTFlange->DefineSection(4, z, kRB24B1RCTFlangeRin, 11.16/2.);
956 shRB24B1RCTFlange->DefineSection(5, z, kRB24B1RCTFlangeRin, 11.16/2.);
957 TGeoVolume* voRB24B1RCTFlange = new TGeoVolume("RB24B1RCTFlange", shRB24B1RCTFlange, kMedCu);
958 z = kRB24B1L - kRB24B1RCTFlangeL;
960 voRB24B1BellowM->AddNode(voRB24B1RCTFlange, 1, new TGeoTranslation(0., 0., z));
962 // Pos 2.2 RF-Contact LHCVSR__0004
964 TGeoPcon* shRB24B1RCT = new TGeoPcon(0., 360., 3);
965 const Float_t kRB24B1RCTRin = 8.00/2.; // Inner radius
966 const Float_t kRB24B1RCTCRin = 8.99/2.; // Max. inner radius conical section
967 const Float_t kRB24B1RCTL = 11.78; // Length
968 const Float_t kRB24B1RCTSL = 10.48; // Length of straight section
969 const Float_t kRB24B1RCTd = 0.03; // Thickness
972 shRB24B1RCT->DefineSection(0, z, kRB24B1RCTCRin, kRB24B1RCTCRin + kRB24B1RCTd);
973 z = kRB24B1RCTL - kRB24B1RCTSL;
974 // In the (VSR0004) this section is straight in (LHCVC2U_0001) it is conical ????
975 shRB24B1RCT->DefineSection(1, z, kRB24B1RCTRin + 0.35, kRB24B1RCTRin + 0.35 + kRB24B1RCTd);
976 z = kRB24B1RCTL - 0.03;
977 shRB24B1RCT->DefineSection(2, z, kRB24B1RCTRin, kRB24B1RCTRin + kRB24B1RCTd);
979 TGeoVolume* voRB24B1RCT = new TGeoVolume("RB24B1RCT", shRB24B1RCT, kMedCu);
980 z = kRB24B1L - kRB24B1RCTL - 0.45;
981 voRB24B1BellowM->AddNode(voRB24B1RCT, 1, new TGeoTranslation(0., 0., z));
984 // Pos 3 Trans. Tube Flange LHCVSR__0065
986 // Pos 3.1 Transition Tube D53 LHCVSR__0064
987 // Pos 3.2 Transition Flange LHCVSR__0060
988 // Pos 3.3 Transition Tube LHCVSR__0058
989 TGeoPcon* shRB24B1TTF = new TGeoPcon(0., 360., 7);
992 shRB24B1TTF->DefineSection(0, z, 6.30/2., 11.16/2.);
994 shRB24B1TTF->DefineSection(1, z, 6.30/2., 11.16/2.);
995 shRB24B1TTF->DefineSection(2, z, 6.30/2., 9.3/2.);
997 shRB24B1TTF->DefineSection(3, z, 6.30/2., 9.3/2.);
999 shRB24B1TTF->DefineSection(4, z, 6.30/2., 6.7/2.);
1001 shRB24B1TTF->DefineSection(5, z, 6.30/2., 6.7/2.);
1004 shRB24B1TTF->DefineSection(6, z, 8.05/2., 8.45/2.);
1005 TGeoVolume* voRB24B1TTF = new TGeoVolume("RB24B1TTF", shRB24B1TTF, kMedSteel);
1007 voRB24B1BellowM->AddNode(voRB24B1TTF, 1, new TGeoTranslation(0., 0., z));
1012 // Pos 1 Rotable Flange LHCVFX__0031
1013 // Pos 2 RF Screen Tube LHCVC2U_0005
1014 // Pos 3 Shell LHCVC2U_0007
1015 // Pos 4 Extruded Shell LHCVC2U_0006
1016 // Pos 5 Feedthrough Tube LHCVC2U_0004
1017 // Pos 6 Tubulated Flange STDVFUHV0021
1018 // Pos 7 Fixed Flange LHCVFX__0032
1019 // Pos 8 Pumping Elements
1022 // Pos 1 Rotable Flange LHCVFX__0031
1023 // pos 7 Fixed Flange LHCVFX__0032
1026 const Float_t kRB24AIpML = 35.;
1028 TGeoVolume* voRB24AIpM = new TGeoVolume("voRB24AIpM", new TGeoTube(0., 10., kRB24AIpML/2.), kMedAir);
1029 voRB24AIpM->SetVisibility(0);
1033 // Flange 2 x 1.98 = 3.96
1035 //==========================
1037 // Overlap 2 * 0.90 = 1.80
1039 const Float_t kRB24IpRFD1 = 0.68; // Length of section 1
1040 const Float_t kRB24IpRFD2 = 0.30; // Length of section 2
1041 const Float_t kRB24IpRFD3 = 0.10; // Length of section 3
1042 const Float_t kRB24IpRFD4 = 0.35; // Length of section 4
1043 const Float_t kRB24IpRFD5 = 0.55; // Length of section 5
1045 const Float_t kRB24IpRFRo = 15.20/2.; // Flange outer radius
1046 const Float_t kRB24IpRFRi1 = 6.30/2.; // Flange inner radius section 1
1047 const Float_t kRB24IpRFRi2 = 6.00/2.; // Flange inner radius section 2
1048 const Float_t kRB24IpRFRi3 = 5.84/2.; // Flange inner radius section 3
1049 const Float_t kRB24IpRFRi4 = 6.00/2.; // Flange inner radius section 1
1050 const Float_t kRB24IpRFRi5 = 10.50/2.; // Flange inner radius section 2
1052 TGeoPcon* shRB24IpRF = new TGeoPcon(0., 360., 9);
1054 shRB24IpRF->DefineSection(0, z0, kRB24IpRFRi1, kRB24IpRFRo);
1056 shRB24IpRF->DefineSection(1, z0, kRB24IpRFRi2, kRB24IpRFRo);
1058 shRB24IpRF->DefineSection(2, z0, kRB24IpRFRi2, kRB24IpRFRo);
1059 shRB24IpRF->DefineSection(3, z0, kRB24IpRFRi3, kRB24IpRFRo);
1061 shRB24IpRF->DefineSection(4, z0, kRB24IpRFRi3, kRB24IpRFRo);
1062 shRB24IpRF->DefineSection(5, z0, kRB24IpRFRi4, kRB24IpRFRo);
1064 shRB24IpRF->DefineSection(6, z0, kRB24IpRFRi4, kRB24IpRFRo);
1065 shRB24IpRF->DefineSection(7, z0, kRB24IpRFRi5, kRB24IpRFRo);
1067 shRB24IpRF->DefineSection(8, z0, kRB24IpRFRi5, kRB24IpRFRo);
1069 TGeoVolume* voRB24IpRF = new TGeoVolume("RB24IpRF", shRB24IpRF, kMedSteel);
1072 // Pos 2 RF Screen Tube LHCVC2U_0005
1077 Float_t kRB24IpSTTL = 32.84; // Total length of the tube
1078 Float_t kRB24IpSTTRi = 5.80/2.; // Inner Radius
1079 Float_t kRB24IpSTTRo = 6.00/2.; // Outer Radius
1080 TGeoVolume* voRB24IpSTT = new TGeoVolume("RB24IpSTT", new TGeoTube(kRB24IpSTTRi, kRB24IpSTTRo, kRB24IpSTTL/2.), kMedSteel);
1082 Float_t kRB24IpSTCL = 0.4; // Lenth of the crochet detail
1083 // Length of the screen
1084 Float_t kRB24IpSTSL = 9.00 - 2. * kRB24IpSTCL;
1085 // Rel. position of the screen
1086 Float_t kRB24IpSTSZ = 7.00 + kRB24IpSTCL;
1087 TGeoVolume* voRB24IpSTS = new TGeoVolume("RB24IpSTS", new TGeoTube(kRB24IpSTTRi, kRB24IpSTTRo, kRB24IpSTSL/2.), kMedSteel);
1089 TGeoVolume* voRB24IpSTV = new TGeoVolume("RB24IpSTV", new TGeoTube(0., kRB24IpSTTRi, kRB24AIpML/2.), kMedVac);
1091 voRB24IpSTT->AddNode(voRB24IpSTS, 1, new TGeoTranslation(0., 0., kRB24IpSTSZ - kRB24IpSTTL/2. + kRB24IpSTSL/2.));
1095 Float_t kRB24IpSTCRi = kRB24IpSTTRo + 0.25;
1097 Float_t kRB24IpSTCRo = kRB24IpSTTRo + 0.35;
1098 // Length of 1stsection
1099 Float_t kRB24IpSTCL1 = 0.15;
1100 // Length of 2nd section
1101 Float_t kRB24IpSTCL2 = 0.15;
1102 // Length of 3rd section
1103 Float_t kRB24IpSTCL3 = 0.10;
1104 // Rel. position of 1st Crochet
1107 TGeoPcon* shRB24IpSTC = new TGeoPcon(0., 360., 5);
1109 shRB24IpSTC->DefineSection(0, z0, kRB24IpSTCRi, kRB24IpSTCRo);
1111 shRB24IpSTC->DefineSection(1, z0, kRB24IpSTCRi, kRB24IpSTCRo);
1112 shRB24IpSTC->DefineSection(2, z0, kRB24IpSTTRo, kRB24IpSTCRo);
1114 shRB24IpSTC->DefineSection(3, z0, kRB24IpSTTRo, kRB24IpSTCRo);
1116 shRB24IpSTC->DefineSection(4, z0, kRB24IpSTTRo, kRB24IpSTTRo + 0.001);
1117 TGeoVolume* voRB24IpSTC = new TGeoVolume("RB24IpSTC", shRB24IpSTC, kMedSteel);
1119 // Pos 3 Shell LHCVC2U_0007
1120 // Pos 4 Extruded Shell LHCVC2U_0006
1121 Float_t kRB24IpShellL = 4.45; // Length of the Shell
1122 Float_t kRB24IpShellD = 0.10; // Wall thickness of the shell
1123 Float_t kRB24IpShellCTRi = 6.70/2.; // Inner radius of the connection tube
1124 Float_t kRB24IpShellCTL = 1.56; // Length of the connection tube
1125 Float_t kRB24IpShellCARi = 17.80/2.; // Inner radius of the cavity
1126 Float_t kRB24IpShellCCRo = 18.20/2.; // Inner radius at the centre
1128 TGeoPcon* shRB24IpShell = new TGeoPcon(0., 360., 7);
1130 shRB24IpShell->DefineSection(0, z0, kRB24IpShellCTRi, kRB24IpShellCTRi + kRB24IpShellD);
1131 z0 += kRB24IpShellCTL;
1132 shRB24IpShell->DefineSection(1, z0, kRB24IpShellCTRi, kRB24IpShellCTRi + kRB24IpShellD);
1133 shRB24IpShell->DefineSection(2, z0, kRB24IpShellCTRi, kRB24IpShellCARi + kRB24IpShellD);
1134 z0 += kRB24IpShellD;
1135 shRB24IpShell->DefineSection(3, z0, kRB24IpShellCARi, kRB24IpShellCARi + kRB24IpShellD);
1136 z0 = kRB24IpShellL - kRB24IpShellD;
1137 shRB24IpShell->DefineSection(4, z0, kRB24IpShellCARi, kRB24IpShellCARi + kRB24IpShellD);
1138 shRB24IpShell->DefineSection(5, z0, kRB24IpShellCARi, kRB24IpShellCCRo);
1140 shRB24IpShell->DefineSection(6, z0, kRB24IpShellCARi, kRB24IpShellCCRo);
1141 TGeoVolume* voRB24IpShell = new TGeoVolume("RB24IpShell", shRB24IpShell, kMedSteel);
1143 TGeoPcon* shRB24IpShellM = MakeMotherFromTemplate(shRB24IpShell, 0, 6, kRB24IpShellCTRi , 13);
1146 for (Int_t i = 0; i < 6; i++) {
1147 z = 2. * kRB24IpShellL - shRB24IpShellM->GetZ(5-i);
1148 Float_t rmin = shRB24IpShellM->GetRmin(5-i);
1149 Float_t rmax = shRB24IpShellM->GetRmax(5-i);
1150 shRB24IpShellM->DefineSection(7+i, z, rmin, rmax);
1153 TGeoVolume* voRB24IpShellM = new TGeoVolume("RB24IpShellM", shRB24IpShellM, kMedVac);
1154 voRB24IpShellM->SetVisibility(0);
1155 voRB24IpShellM->AddNode(voRB24IpShell, 1, gGeoIdentity);
1156 voRB24IpShellM->AddNode(voRB24IpShell, 2, new TGeoCombiTrans(0., 0., 2. * kRB24IpShellL, rot180));
1158 // Pos 8 Pumping Elements
1161 TGeoVolume* voRB24IpPE = new TGeoVolume("voRB24IpPE", new TGeoTube(0.9, 1., 2.54/2.), kMedSteel);
1162 Float_t kRB24IpPEAR = 5.5;
1164 for (Int_t i = 0; i < 15; i++) {
1165 Float_t phi = Float_t(i) * 24.;
1166 Float_t x = kRB24IpPEAR * TMath::Cos(kDegRad * phi);
1167 Float_t y = kRB24IpPEAR * TMath::Sin(kDegRad * phi);
1168 voRB24IpShellM->AddNode(voRB24IpPE, i+1, new TGeoTranslation(x, y, kRB24IpShellL));
1175 // Here we could add some Ti strips
1177 // Postioning of elements
1178 voRB24AIpM->AddNode(voRB24IpRF, 1, new TGeoTranslation(0., 0., -kRB24AIpML/2.));
1179 voRB24AIpM->AddNode(voRB24IpRF, 2, new TGeoCombiTrans (0., 0., +kRB24AIpML/2., rot180));
1180 voRB24AIpM->AddNode(voRB24IpSTT, 1, new TGeoTranslation(0., 0., 0.));
1181 voRB24AIpM->AddNode(voRB24IpSTV, 1, new TGeoTranslation(0., 0., 0.));
1182 voRB24AIpM->AddNode(voRB24IpShellM, 1, new TGeoTranslation(0., 0., -kRB24AIpML/2. + 8.13));
1183 voRB24AIpM->AddNode(voRB24IpSTC, 1, new TGeoTranslation(0., 0., 8.13 - kRB24AIpML/2.));
1184 voRB24AIpM->AddNode(voRB24IpSTC, 2, new TGeoCombiTrans (0., 0., 8.14 + 8.9 - kRB24AIpML/2., rot180));
1188 // VAC Series 47 DN 63 with manual actuator
1190 const Float_t kRB24ValveWz = 7.5;
1191 const Float_t kRB24ValveDN = 10.0/2.;
1193 // Body containing the valve plate
1195 const Float_t kRB24ValveBoWx = 15.6;
1196 const Float_t kRB24ValveBoWy = (21.5 + 23.1 - 5.);
1197 const Float_t kRB24ValveBoWz = 4.6;
1198 const Float_t kRB24ValveBoD = 0.5;
1200 TGeoVolume* voRB24ValveBoM =
1201 new TGeoVolume("RB24ValveBoM",
1202 new TGeoBBox( kRB24ValveBoWx/2., kRB24ValveBoWy/2., kRB24ValveBoWz/2.), kMedAir);
1203 voRB24ValveBoM->SetVisibility(0);
1204 TGeoVolume* voRB24ValveBo =
1205 new TGeoVolume("RB24ValveBo",
1206 new TGeoBBox( kRB24ValveBoWx/2., kRB24ValveBoWy/2., kRB24ValveBoWz/2.), kMedSteel);
1207 voRB24ValveBoM->AddNode(voRB24ValveBo, 1, gGeoIdentity);
1211 TGeoVolume* voRB24ValveBoI = new TGeoVolume("RB24ValveBoI",
1212 new TGeoBBox( kRB24ValveBoWx/2. - kRB24ValveBoD,
1213 kRB24ValveBoWy/2. - kRB24ValveBoD/2.,
1214 kRB24ValveBoWz/2. - kRB24ValveBoD),
1216 voRB24ValveBo->AddNode(voRB24ValveBoI, 1, new TGeoTranslation(0., kRB24ValveBoD/2., 0.));
1218 // Opening and Flanges
1219 const Float_t kRB24ValveFlRo = 18./2.;
1220 const Float_t kRB24ValveFlD = 1.45;
1221 TGeoVolume* voRB24ValveBoA = new TGeoVolume("RB24ValveBoA",
1222 new TGeoTube(0., kRB24ValveDN/2., kRB24ValveBoD/2.), kMedVac);
1223 voRB24ValveBo->AddNode(voRB24ValveBoA, 1, new TGeoTranslation(0., - kRB24ValveBoWy/2. + 21.5, -kRB24ValveBoWz/2. + kRB24ValveBoD/2.));
1224 voRB24ValveBo->AddNode(voRB24ValveBoA, 2, new TGeoTranslation(0., - kRB24ValveBoWy/2. + 21.5, +kRB24ValveBoWz/2. - kRB24ValveBoD/2.));
1226 TGeoVolume* voRB24ValveFl = new TGeoVolume("RB24ValveFl", new TGeoTube(kRB24ValveDN/2., kRB24ValveFlRo, kRB24ValveFlD/2.), kMedSteel);
1227 TGeoVolume* voRB24ValveFlI = new TGeoVolume("RB24ValveFlI", new TGeoTube(0., kRB24ValveFlRo, kRB24ValveFlD/2.), kMedVac);
1228 voRB24ValveFlI->AddNode(voRB24ValveFl, 1, gGeoIdentity);
1232 const Float_t kRB24ValveAFlWx = 18.9;
1233 const Float_t kRB24ValveAFlWy = 5.0;
1234 const Float_t kRB24ValveAFlWz = 7.7;
1235 TGeoVolume* voRB24ValveAFl = new TGeoVolume("RB24ValveAFl", new TGeoBBox(kRB24ValveAFlWx/2., kRB24ValveAFlWy/2., kRB24ValveAFlWz/2.), kMedSteel);
1238 const Float_t kRB24ValveATRo = 9.7/2.;
1239 const Float_t kRB24ValveATH = 16.6;
1240 TGeoVolume* voRB24ValveAT = new TGeoVolume("RB24ValveAT", new TGeoTube(kRB24ValveATRo - 2. * kRB24ValveBoD,kRB24ValveATRo, kRB24ValveATH/2.),
1243 // Manual Actuator (my best guess)
1244 TGeoVolume* voRB24ValveMA1 = new TGeoVolume("RB24ValveMA1", new TGeoCone(2.5/2., 0., 0.5, 4.5, 5.), kMedSteel);
1245 TGeoVolume* voRB24ValveMA2 = new TGeoVolume("RB24ValveMA2", new TGeoTorus(5., 0., 1.25), kMedSteel);
1246 TGeoVolume* voRB24ValveMA3 = new TGeoVolume("RB24ValveMA3", new TGeoTube (0., 1.25, 2.5), kMedSteel);
1250 // Position all volumes
1252 TGeoVolumeAssembly* voRB24ValveMo = new TGeoVolumeAssembly("RB24ValveMo");
1253 voRB24ValveMo->AddNode(voRB24ValveFl, 1, new TGeoTranslation(0., 0., - 7.5/2. + kRB24ValveFlD/2.));
1254 voRB24ValveMo->AddNode(voRB24ValveFl, 2, new TGeoTranslation(0., 0., + 7.5/2. - kRB24ValveFlD/2.));
1256 voRB24ValveMo->AddNode(voRB24ValveBoM, 1, new TGeoTranslation(0., y0 + kRB24ValveBoWy/2., 0.));
1257 y0 += kRB24ValveBoWy;
1258 voRB24ValveMo->AddNode(voRB24ValveAFl, 1, new TGeoTranslation(0., y0 + kRB24ValveAFlWy/2., 0.));
1259 y0 += kRB24ValveAFlWy;
1260 voRB24ValveMo->AddNode(voRB24ValveAT, 1, new TGeoCombiTrans(0., y0 + kRB24ValveATH/2., 0., rotyz));
1261 y0 += kRB24ValveATH;
1262 voRB24ValveMo->AddNode(voRB24ValveMA1, 1, new TGeoCombiTrans(0., y0 + 2.5/2., 0., rotyz));
1264 voRB24ValveMo->AddNode(voRB24ValveMA2, 1, new TGeoCombiTrans(0., y0 + 2.5/2., 0., rotyz));
1266 voRB24ValveMo->AddNode(voRB24ValveMA3, 1, new TGeoCombiTrans(5./TMath::Sqrt(2.), y0 + 5.0/2., 5./TMath::Sqrt(2.), rotyz));
1268 // Warm Module Type VMABC
1274 // Central Piece 11.50
1277 //===================================
1280 // Pos 1 Warm Bellows DN100 LHCVBU__0016
1281 // Pos 2 Trans. Tube Flange LHCVSR__0062
1282 // Pos 3 RF Contact D63 LHCVSR__0057
1283 // [Pos 4 Hex. Countersunk Screw Bossard BN4719]
1284 // [Pos 5 Tension spring LHCVSR__00239]
1287 // Pos 1 Warm Bellows DN100 LHCVBU__0016
1288 // Pos 1.1 Right Body 2 Ports with Support LHCVBU__0014
1291 const Float_t kRB24VMABCRBT1Ri = 10.0/2.;
1292 const Float_t kRB24VMABCRBT1Ro = 10.3/2.;
1293 const Float_t kRB24VMABCRBT1L = 11.5;
1294 const Float_t kRB24VMABCRBT1L2 = 8.;
1295 const Float_t kRB24VMABCL = 28.;
1297 TGeoTube* shRB24VMABCRBT1 = new TGeoTube(kRB24VMABCRBT1Ri, kRB24VMABCRBT1Ro, kRB24VMABCRBT1L/2.);
1298 shRB24VMABCRBT1->SetName("RB24VMABCRBT1");
1299 TGeoTube* shRB24VMABCRBT1o = new TGeoTube(0., kRB24VMABCRBT1Ro, kRB24VMABCRBT1L/2.);
1300 shRB24VMABCRBT1o->SetName("RB24VMABCRBT1o");
1301 TGeoTube* shRB24VMABCRBT1o2 = new TGeoTube(0., kRB24VMABCRBT1Ro + 0.3, kRB24VMABCRBT1L/2.);
1302 shRB24VMABCRBT1o2->SetName("RB24VMABCRBT1o2");
1303 // Lower inforcement
1304 TGeoVolume* voRB24VMABCRBT12 = new TGeoVolume("RB24VMABCRBT12",
1305 new TGeoTubeSeg(kRB24VMABCRBT1Ro, kRB24VMABCRBT1Ro + 0.3, kRB24VMABCRBT1L2/2., 220., 320.)
1309 const Float_t kRB24VMABCRBT2Ri = 6.0/2.;
1310 const Float_t kRB24VMABCRBT2Ro = 6.3/2.;
1311 const Float_t kRB24VMABCRBF2Ro = 11.4/2.;
1312 const Float_t kRB24VMABCRBT2L = 5.95 + 2.; // 2. cm added for welding
1313 const Float_t kRB24VMABCRBF2L = 1.75;
1314 TGeoTube* shRB24VMABCRBT2 = new TGeoTube(kRB24VMABCRBT2Ri, kRB24VMABCRBT2Ro, kRB24VMABCRBT2L/2.);
1315 shRB24VMABCRBT2->SetName("RB24VMABCRBT2");
1316 TGeoTube* shRB24VMABCRBT2i = new TGeoTube(0., kRB24VMABCRBT2Ri, kRB24VMABCRBT2L/2. + 2.);
1317 shRB24VMABCRBT2i->SetName("RB24VMABCRBT2i");
1318 TGeoCombiTrans* tRBT2 = new TGeoCombiTrans(-11.5 + kRB24VMABCRBT2L/2., 0., 7.2 - kRB24VMABCRBT1L/2. , rotxz);
1319 tRBT2->SetName("tRBT2");
1320 tRBT2->RegisterYourself();
1321 TGeoCompositeShape* shRB24VMABCRBT2c = new TGeoCompositeShape("shRB24VMABCRBT2c","RB24VMABCRBT2:tRBT2-RB24VMABCRBT1o");
1322 TGeoVolume* voRB24VMABCRBT2 = new TGeoVolume("shRB24VMABCRBT2", shRB24VMABCRBT2c, kMedSteel);
1324 // Pos 1.4 Flange DN63 LHCVBU__0008
1325 TGeoVolume* voRB24VMABCRBF2 = new TGeoVolume("RB24VMABCRBF2",
1326 new TGeoTube(kRB24VMABCRBT2Ro, kRB24VMABCRBF2Ro, kRB24VMABCRBF2L/2.), kMedSteel);
1327 // DN63 Blank Flange (my best guess)
1328 TGeoVolume* voRB24VMABCRBF2B = new TGeoVolume("RB24VMABCRBF2B",
1329 new TGeoTube(0., kRB24VMABCRBF2Ro, kRB24VMABCRBF2L/2.), kMedSteel);
1332 const Float_t kRB24VMABCRBT3Ri = 3.5/2.;
1333 const Float_t kRB24VMABCRBT3Ro = 3.8/2.;
1334 const Float_t kRB24VMABCRBF3Ro = 7.0/2.;
1335 const Float_t kRB24VMABCRBT3L = 4.95 + 2.; // 2. cm added for welding
1336 const Float_t kRB24VMABCRBF3L = 1.27;
1337 TGeoTube* shRB24VMABCRBT3 = new TGeoTube(kRB24VMABCRBT3Ri, kRB24VMABCRBT3Ro, kRB24VMABCRBT3L/2);
1338 shRB24VMABCRBT3->SetName("RB24VMABCRBT3");
1339 TGeoTube* shRB24VMABCRBT3i = new TGeoTube(0., kRB24VMABCRBT3Ri, kRB24VMABCRBT3L/2. + 2.);
1340 shRB24VMABCRBT3i->SetName("RB24VMABCRBT3i");
1341 TGeoCombiTrans* tRBT3 = new TGeoCombiTrans(0., 10.5 - kRB24VMABCRBT3L/2., 7.2 - kRB24VMABCRBT1L/2. , rotyz);
1342 tRBT3->SetName("tRBT3");
1343 tRBT3->RegisterYourself();
1344 TGeoCompositeShape* shRB24VMABCRBT3c = new TGeoCompositeShape("shRB24VMABCRBT3c","RB24VMABCRBT3:tRBT3-RB24VMABCRBT1o");
1345 TGeoVolume* voRB24VMABCRBT3 = new TGeoVolume("shRB24VMABCRBT3", shRB24VMABCRBT3c, kMedSteel);
1347 // Pos 1.4 Flange DN35 LHCVBU__0007
1348 TGeoVolume* voRB24VMABCRBF3 = new TGeoVolume("RB24VMABCRBF3",
1349 new TGeoTube(kRB24VMABCRBT3Ro, kRB24VMABCRBF3Ro, kRB24VMABCRBF3L/2.), kMedSteel);
1352 const Float_t kRB24VMABCRBT4Ri = 6.0/2.;
1353 const Float_t kRB24VMABCRBT4Ro = 6.4/2.;
1354 const Float_t kRB24VMABCRBT4L = 6.6;
1355 TGeoTube* shRB24VMABCRBT4 = new TGeoTube(kRB24VMABCRBT4Ri, kRB24VMABCRBT4Ro, kRB24VMABCRBT4L/2.);
1356 shRB24VMABCRBT4->SetName("RB24VMABCRBT4");
1357 TGeoCombiTrans* tRBT4 = new TGeoCombiTrans(0.,-11.+kRB24VMABCRBT4L/2., 7.2 - kRB24VMABCRBT1L/2. , rotyz);
1358 tRBT4->SetName("tRBT4");
1359 tRBT4->RegisterYourself();
1360 TGeoCompositeShape* shRB24VMABCRBT4c = new TGeoCompositeShape("shRB24VMABCRBT4c","RB24VMABCRBT4:tRBT4-RB24VMABCRBT1o2");
1361 TGeoVolume* voRB24VMABCRBT4 = new TGeoVolume("shRB24VMABCRBT4", shRB24VMABCRBT4c, kMedSteel);
1362 TGeoCompositeShape* shRB24VMABCRB = new TGeoCompositeShape("shRB24VMABCRB", "RB24VMABCRBT1-(RB24VMABCRBT2i:tRBT2+RB24VMABCRBT3i:tRBT3)");
1363 TGeoVolume* voRB24VMABCRBI = new TGeoVolume("RB24VMABCRBI", shRB24VMABCRB, kMedSteel);
1366 const Float_t kRB24VMABCRBBx = 16.0;
1367 const Float_t kRB24VMABCRBBy = 1.5;
1368 const Float_t kRB24VMABCRBBz = 15.0;
1370 // Relative position of tubes
1371 const Float_t kRB24VMABCTz = 7.2;
1372 // Relative position of plate
1373 const Float_t kRB24VMABCPz = 3.6;
1374 const Float_t kRB24VMABCPy = -12.5;
1376 TGeoVolume* voRB24VMABCRBP = new TGeoVolume("RB24VMABCRBP", new TGeoBBox(kRB24VMABCRBBx/2., kRB24VMABCRBBy/2., kRB24VMABCRBBz/2.), kMedSteel);
1378 // Pirani Gauge (my best guess)
1380 TGeoPcon* shRB24VMABCPirani = new TGeoPcon(0., 360., 15);
1383 shRB24VMABCPirani->DefineSection( 0, z, 0.8 , kRB24VMABCRBF3Ro);
1384 z += kRB24VMABCRBF3L; // 1.3
1385 shRB24VMABCPirani->DefineSection( 1, z, 0.8 , kRB24VMABCRBF3Ro);
1386 shRB24VMABCPirani->DefineSection( 2, z, 0.8 , 1.0);
1389 shRB24VMABCPirani->DefineSection( 3, z, 0.8 , 1.0);
1391 shRB24VMABCPirani->DefineSection( 4, z, 0.8 , 1.75);
1393 shRB24VMABCPirani->DefineSection( 5, z, 0.8 , 1.75);
1394 shRB24VMABCPirani->DefineSection( 6, z, 0.8 , 1.0);
1396 shRB24VMABCPirani->DefineSection( 7, z, 0.8 , 1.0);
1397 shRB24VMABCPirani->DefineSection( 8, z, 0.8 , 2.5);
1399 shRB24VMABCPirani->DefineSection( 9, z, 0.80, 2.50);
1400 shRB24VMABCPirani->DefineSection(10, z, 1.55, 1.75);
1402 shRB24VMABCPirani->DefineSection(11, z, 1.55, 1.75);
1403 shRB24VMABCPirani->DefineSection(11, z, 0.00, 1.75);
1405 shRB24VMABCPirani->DefineSection(12, z, 0.00, 1.75);
1406 shRB24VMABCPirani->DefineSection(13, z, 0.00, 0.75);
1408 shRB24VMABCPirani->DefineSection(14, z, 0.00, 0.75);
1409 TGeoVolume* voRB24VMABCPirani = new TGeoVolume("RB24VMABCPirani", shRB24VMABCPirani, kMedSteel);
1416 // Positioning of elements
1417 TGeoVolumeAssembly* voRB24VMABCRB = new TGeoVolumeAssembly("RB24VMABCRB");
1419 voRB24VMABCRB->AddNode(voRB24VMABCRBI, 1, gGeoIdentity);
1421 voRB24VMABCRB->AddNode(voRB24VMABCRBP, 1, new TGeoTranslation(0., kRB24VMABCPy + kRB24VMABCRBBy /2.,
1422 kRB24VMABCRBBz/2. - kRB24VMABCRBT1L/2. + kRB24VMABCPz));
1424 voRB24VMABCRB->AddNode(voRB24VMABCRBT2, 1, gGeoIdentity);
1426 voRB24VMABCRB->AddNode(voRB24VMABCRBF2, 1, new TGeoCombiTrans(kRB24VMABCPy + kRB24VMABCRBF2L/2., 0., kRB24VMABCTz - kRB24VMABCRBT1L/2., rotxz));
1427 // Blank Flange Tube 2
1428 voRB24VMABCRB->AddNode(voRB24VMABCRBF2B, 1, new TGeoCombiTrans(kRB24VMABCPy- kRB24VMABCRBF2L/2., 0., kRB24VMABCTz - kRB24VMABCRBT1L/2., rotxz));
1430 voRB24VMABCRB->AddNode(voRB24VMABCRBT3, 1, gGeoIdentity);
1432 voRB24VMABCRB->AddNode(voRB24VMABCRBF3, 1, new TGeoCombiTrans(0., 11.2 - kRB24VMABCRBF3L/2., kRB24VMABCTz - kRB24VMABCRBT1L/2., rotyz));
1434 voRB24VMABCRB->AddNode(voRB24VMABCPirani, 1, new TGeoCombiTrans(0., 11.2, kRB24VMABCTz - kRB24VMABCRBT1L/2., rotyz));
1436 voRB24VMABCRB->AddNode(voRB24VMABCRBT4, 1, gGeoIdentity);
1438 voRB24VMABCRB->AddNode(voRB24VMABCRBT12, 1, new TGeoTranslation(0., 0., kRB24VMABCRBT1L2/2. - kRB24VMABCRBT1L/2. + 2.8));
1441 // Pos 1.3 Bellows with end part LHCVBU__0002
1444 // Connection tube inner r
1445 const Float_t kRB24VMABBEConTubeRin = 10.0/2.;
1446 // Connection tube outer r
1447 const Float_t kRB24VMABBEConTubeRou = 10.3/2.;
1448 // Connection tube length
1449 const Float_t kRB24VMABBEConTubeL1 = 0.9;
1450 const Float_t kRB24VMABBEConTubeL2 = 2.6;
1451 // const Float_t RB24VMABBEBellowL = kRB24VMABBEConTubeL1 + kRB24VMABBEConTubeL2 + kRB24B1BellowUndL;
1454 TGeoPcon* shRB24VMABBEBellowM = new TGeoPcon(0., 360., 6);
1455 // Connection Tube and Flange
1457 shRB24VMABBEBellowM->DefineSection( 0, z, kRB24VMABBEConTubeRin, kRB24VMABBEConTubeRou);
1458 z += kRB24VMABBEConTubeL1;
1459 shRB24VMABBEBellowM->DefineSection( 1, z, kRB24VMABBEConTubeRin, kRB24VMABBEConTubeRou);
1460 shRB24VMABBEBellowM->DefineSection( 2, z, kRB24B1BellowRi, kRB24B1BellowRo + kRB24B1ProtTubeThickness);
1461 z += kRB24B1BellowUndL;
1462 shRB24VMABBEBellowM->DefineSection( 3, z, kRB24B1BellowRi, kRB24B1BellowRo + kRB24B1ProtTubeThickness);
1463 shRB24VMABBEBellowM->DefineSection( 4, z, kRB24VMABBEConTubeRin, kRB24VMABBEConTubeRou);
1464 z += kRB24VMABBEConTubeL2;
1465 shRB24VMABBEBellowM->DefineSection( 5, z, kRB24VMABBEConTubeRin, kRB24VMABBEConTubeRou);
1466 TGeoVolume* voRB24VMABBEBellowM = new TGeoVolume("RB24VMABBEBellowM", shRB24VMABBEBellowM, kMedVac);
1467 voRB24VMABBEBellowM->SetVisibility(0);
1469 // Connection tube left
1470 TGeoVolume* voRB24VMABBECT1 = new TGeoVolume("RB24VMABBECT1",
1471 new TGeoTube(kRB24VMABBEConTubeRin, kRB24VMABBEConTubeRou,kRB24VMABBEConTubeL1/2.),
1473 // Connection tube right
1474 TGeoVolume* voRB24VMABBECT2 = new TGeoVolume("RB24VMABBECT2",
1475 new TGeoTube(kRB24VMABBEConTubeRin, kRB24VMABBEConTubeRou,kRB24VMABBEConTubeL2/2.),
1477 z = kRB24VMABBEConTubeL1/2.;
1478 voRB24VMABBEBellowM->AddNode(voRB24VMABBECT1, 1, new TGeoTranslation(0., 0., z));
1479 z += kRB24VMABBEConTubeL1/2.;
1480 z += kRB24B1BellowUndL/2.;
1481 voRB24VMABBEBellowM->AddNode(voRB24B1Bellow, 2, new TGeoTranslation(0., 0., z));
1482 z += kRB24B1BellowUndL/2.;
1483 z += kRB24VMABBEConTubeL2/2.;
1484 voRB24VMABBEBellowM->AddNode(voRB24VMABBECT2, 1, new TGeoTranslation(0., 0., z));
1485 z += kRB24VMABBEConTubeL2/2.;
1487 voRB24VMABCRB->AddNode(voRB24VMABBEBellowM, 1, new TGeoTranslation(0., 0., kRB24VMABCRBT1L/2.));
1489 // Pos 1.2 Rotable flange LHCVBU__0013[*]
1491 voRB24VMABCRB->AddNode(voRB24B1RFlange, 3, new TGeoCombiTrans(0., 0., - kRB24VMABCRBT1L/2. + 0.86, rot180));
1493 z = kRB24VMABCRBT1L/2. + kRB24B1BellowUndL +kRB24VMABBEConTubeL1 + kRB24VMABBEConTubeL2;
1494 voRB24VMABCRB->AddNode(voRB24B1RFlange, 4, new TGeoTranslation(0., 0., z - 0.86));
1497 // Pos 2 Trans. Tube Flange LHCVSR__0062
1498 // Pos 2.1 Transition Tube LHCVSR__0063
1499 // Pos 2.2 Transition Flange LHCVSR__0060
1501 // Transition Tube with Flange
1502 TGeoPcon* shRB24VMABCTT = new TGeoPcon(0., 360., 7);
1504 shRB24VMABCTT->DefineSection(0, z, 6.3/2., 11.16/2.);
1506 shRB24VMABCTT->DefineSection(1, z, 6.3/2., 11.16/2.);
1507 shRB24VMABCTT->DefineSection(2, z, 6.3/2., 9.30/2.);
1509 shRB24VMABCTT->DefineSection(3, z, 6.3/2., 9.30/2.);
1510 shRB24VMABCTT->DefineSection(4, z, 6.3/2., 6.70/2.);
1511 z += (20.35 - 0.63);
1512 shRB24VMABCTT->DefineSection(5, z, 6.3/2., 6.7/2.);
1514 shRB24VMABCTT->DefineSection(6, z, 6.3/2., 6.7/2.);
1515 TGeoVolume* voRB24VMABCTT = new TGeoVolume("RB24VMABCTT", shRB24VMABCTT, kMedSteel);
1516 voRB24VMABCRB->AddNode(voRB24VMABCTT, 1, new TGeoTranslation(0., 0., - kRB24VMABCRBT1L/2.-1.));
1518 // Pos 3 RF Contact D63 LHCVSR__0057
1519 // Pos 3.1 RF Contact Flange LHCVSR__0017
1521 TGeoPcon* shRB24VMABCCTFlange = new TGeoPcon(0., 360., 6);
1522 const Float_t kRB24VMABCCTFlangeRin = 6.36/2.; // Inner radius
1523 const Float_t kRB24VMABCCTFlangeL = 1.30; // Length
1526 shRB24VMABCCTFlange->DefineSection(0, z, kRB24VMABCCTFlangeRin, 6.5/2.);
1528 shRB24VMABCCTFlange->DefineSection(1, z, kRB24VMABCCTFlangeRin, 6.5/2.);
1529 shRB24VMABCCTFlange->DefineSection(2, z, kRB24VMABCCTFlangeRin, 6.9/2.);
1531 shRB24VMABCCTFlange->DefineSection(3, z, kRB24VMABCCTFlangeRin, 6.9/2.);
1532 shRB24VMABCCTFlange->DefineSection(4, z, kRB24VMABCCTFlangeRin, 11.16/2.);
1534 shRB24VMABCCTFlange->DefineSection(5, z, kRB24VMABCCTFlangeRin, 11.16/2.);
1535 TGeoVolume* voRB24VMABCCTFlange = new TGeoVolume("RB24VMABCCTFlange", shRB24VMABCCTFlange, kMedCu);
1537 // Pos 3.2 RF-Contact LHCVSR__0056
1539 TGeoPcon* shRB24VMABCCT = new TGeoPcon(0., 360., 4);
1540 const Float_t kRB24VMABCCTRin = 6.30/2.; // Inner radius
1541 const Float_t kRB24VMABCCTCRin = 7.29/2.; // Max. inner radius conical section
1542 const Float_t kRB24VMABCCTL = 11.88; // Length
1543 const Float_t kRB24VMABCCTSL = 10.48; // Length of straight section
1544 const Float_t kRB24VMABCCTd = 0.03; // Thickness
1546 shRB24VMABCCT->DefineSection(0, z, kRB24VMABCCTCRin, kRB24VMABCCTCRin + kRB24VMABCCTd);
1547 z = kRB24VMABCCTL - kRB24VMABCCTSL;
1548 shRB24VMABCCT->DefineSection(1, z, kRB24VMABCCTRin + 0.35, kRB24VMABCCTRin + 0.35 + kRB24VMABCCTd);
1549 z = kRB24VMABCCTL - kRB24VMABCCTFlangeL;
1550 shRB24VMABCCT->DefineSection(2, z, kRB24VMABCCTRin, kRB24VMABCCTRin + kRB24VMABCCTd);
1552 shRB24VMABCCT->DefineSection(3, z, kRB24VMABCCTRin, kRB24VMABCCTRin + kRB24VMABCCTd);
1554 TGeoVolume* voRB24VMABCCT = new TGeoVolume("RB24VMABCCT", shRB24VMABCCT, kMedCu);
1556 TGeoVolumeAssembly* voRB24VMABRFCT = new TGeoVolumeAssembly("RB24VMABRFCT");
1557 voRB24VMABRFCT->AddNode(voRB24VMABCCT, 1, gGeoIdentity);
1558 voRB24VMABRFCT->AddNode( voRB24VMABCCTFlange, 1, new TGeoTranslation(0., 0., kRB24VMABCCTL - kRB24VMABCCTFlangeL));
1560 z = kRB24VMABCRBT1L/2. + kRB24B1BellowUndL + kRB24VMABBEConTubeL1 + kRB24VMABBEConTubeL2 - kRB24VMABCCTL + 1.;
1561 voRB24VMABCRB->AddNode(voRB24VMABRFCT, 1, new TGeoTranslation(0., 0., z));
1565 // Assembling RB24/1
1567 TGeoVolumeAssembly* voRB24 = new TGeoVolumeAssembly("RB24");
1568 // Cu Tube with two simplified flanges
1569 voRB24->AddNode(voRB24CuTubeM, 1, gGeoIdentity);
1570 if (!fBeamBackground) voRB24->AddNode(voRB24CuTubeA, 1, gGeoIdentity);
1571 z = - kRB24CuTubeL/2 + kRB24CuTubeFL/2.;
1572 voRB24->AddNode(voRB24CuTubeF, 1, new TGeoTranslation(0., 0., z));
1573 z = + kRB24CuTubeL/2 - kRB24CuTubeFL/2.;
1574 voRB24->AddNode(voRB24CuTubeF, 2, new TGeoTranslation(0., 0., z));
1575 // VMABC close to compensator magnet
1576 z = - kRB24CuTubeL/2. - (kRB24VMABCL - kRB24VMABCRBT1L/2) + 1.;
1578 voRB24->AddNode(voRB24VMABCRB, 2, new TGeoTranslation(0., 0., z));
1581 voRB24->AddNode(voRB24B1BellowM, 1, new TGeoTranslation(0., 0., z));
1582 z += (kRB24B1L + kRB24AIpML/2.);
1584 voRB24->AddNode(voRB24AIpM, 1, new TGeoTranslation(0., 0., z));
1585 z += (kRB24AIpML/2. + kRB24ValveWz/2.);
1587 voRB24->AddNode(voRB24ValveMo, 1, new TGeoTranslation(0., 0., z));
1588 z += (kRB24ValveWz/2.+ kRB24VMABCRBT1L/2. + 1.);
1589 // VMABC close to forward detectors
1590 voRB24->AddNode(voRB24VMABCRB, 3, new TGeoTranslation(0., 0., z));
1594 // Copper Tube RB24/2
1596 // This is the part inside the compensator magnet
1597 const Float_t kRB242CuTubeL = 330.0;
1599 TGeoVolume* voRB242CuTubeM = new TGeoVolume("voRB242CuTubeM",
1600 new TGeoTube(0., kRB24CuTubeRo, kRB242CuTubeL/2.), kMedVacM);
1601 voRB242CuTubeM->SetVisibility(0);
1602 TGeoVolume* voRB242CuTube = new TGeoVolume("voRB242CuTube",
1603 new TGeoTube(kRB24CuTubeRi, kRB24CuTubeRo, kRB242CuTubeL/2.), kMedCu);
1604 voRB242CuTubeM->AddNode(voRB242CuTube, 1, gGeoIdentity);
1607 TGeoVolumeAssembly* voRB242 = new TGeoVolumeAssembly("RB242");
1608 voRB242->AddNode(voRB242CuTubeM, 1, gGeoIdentity);
1609 z = - kRB242CuTubeL/2 + kRB24CuTubeFL/2.;
1610 voRB242->AddNode(voRB24CuTubeF, 3, new TGeoTranslation(0., 0., z));
1611 z = + kRB242CuTubeL/2 - kRB24CuTubeFL/2.;
1612 voRB242->AddNode(voRB24CuTubeF, 4, new TGeoTranslation(0., 0., z));
1613 z = - kRB24CuTubeL/2 - kRB24VMABCL - kRB242CuTubeL/2.;
1614 voRB24->AddNode(voRB242, 1, new TGeoTranslation(0., 0., z));
1618 // Copper Tube RB24/3
1619 const Float_t kRB243CuTubeL = 303.35;
1621 TGeoVolume* voRB243CuTubeM = new TGeoVolume("voRB243CuTubeM",
1622 new TGeoTube(0., kRB24CuTubeRo, kRB243CuTubeL/2.), kMedVac);
1623 voRB24CuTubeM->SetVisibility(0);
1624 TGeoVolume* voRB243CuTube = new TGeoVolume("voRB243CuTube",
1625 new TGeoTube(kRB24CuTubeRi, kRB24CuTubeRo, kRB243CuTubeL/2.), kMedCu);
1626 voRB243CuTubeM->AddNode(voRB243CuTube, 1, gGeoIdentity);
1629 TGeoVolumeAssembly* voRB243 = new TGeoVolumeAssembly("RB243");
1630 TGeoVolumeAssembly* voRB243A = new TGeoVolumeAssembly("RB243A");
1632 voRB243A->AddNode(voRB243CuTubeM, 1, gGeoIdentity);
1633 z = - kRB243CuTubeL/2 + kRB24CuTubeFL/2.;
1634 voRB243A->AddNode(voRB24CuTubeF, 5, new TGeoTranslation(0., 0., z));
1635 z = + kRB243CuTubeL/2 - kRB24CuTubeFL/2.;
1636 voRB243A->AddNode(voRB24CuTubeF, 6, new TGeoTranslation(0., 0., z));
1637 z = + kRB243CuTubeL/2;
1638 voRB243A->AddNode(voRB24B1BellowM, 2, new TGeoTranslation(0., 0., z));
1640 z = - kRB243CuTubeL/2. - kRB24B1L;
1641 voRB243->AddNode(voRB243A, 1, new TGeoTranslation(0., 0., z));
1642 z = - (1.5 * kRB243CuTubeL + 2. * kRB24B1L);
1643 voRB243->AddNode(voRB243A, 2, new TGeoTranslation(0., 0., z));
1645 z = - 2. * (kRB243CuTubeL + kRB24B1L) - (kRB24VMABCL - kRB24VMABCRBT1L/2) + 1.;
1646 voRB243->AddNode(voRB24VMABCRB, 3, new TGeoTranslation(0., 0., z));
1648 z = - kRB24CuTubeL/2 - kRB24VMABCL - kRB242CuTubeL;
1649 voRB24->AddNode(voRB243, 1, new TGeoTranslation(0., 0., z));
1654 top->AddNode(voRB24, 1, new TGeoCombiTrans(0., 0., kRB24CuTubeL/2 + 88.5 + 400. + CP2Length, rot180));
1658 ////////////////////////////////////////////////////////////////////////////////
1660 // The Absorber Vacuum system //
1662 ////////////////////////////////////////////////////////////////////////////////
1664 // Rotable Flange starts at: 82.00 cm from IP
1665 // Length of rotable flange section: 10.68 cm
1667 // Length of straight section 207.21 cm
1668 // =======================================================================
1669 // 299.97 cm [0.03 cm missing ?]
1670 // Length of opening cone 252.09 cm
1672 // Length of compensator 30.54 cm
1674 // Length of fixed flange 2.13 - 0.97 1.16 cm
1675 // =======================================================================
1676 // 584.06 cm [584.80 installed] [0.74 cm missing]
1678 // Length of split flange 2.13 - 1.2 0.93 cm
1680 // Length of fixed point section 16.07 cm
1682 // Length of opening cone 629.20 cm
1684 // Kength of the compensator 41.70 cm
1686 // Length of fixed flange 2.99 - 1.72 1.27 cm
1687 // =================================================
1688 // Length of RB26/3 690.07 cm [689.20 installed] [0.87 cm too much]
1691 // Length of split flange 2.13 - 1.2 0.93 cm
1693 // Length of fixed point section 16.07 cm
1695 // Length of opening cone 629.20 cm
1697 // Length of closing cone
1699 // Lenth of straight section
1700 // Kength of the compensator 41.70 cm
1702 // Length of fixed flange 2.99 - 1.72 1.27 cm
1703 // =================================================
1704 // Length of RB26/3 690.07 cm [689.20 installed] [0.87 cm too much]
1706 ///////////////////////////////////////////
1709 // Drawing LHCV2a_0050 [as installed] //
1710 // Drawing LHCV2a_0008 //
1711 // Drawing LHCV2a_0001 //
1712 ///////////////////////////////////////////
1713 // Pos1 Vacuum Tubes LHCVC2A__0010
1714 // Pos2 Compensator LHCVC2A__0064
1715 // Pos3 Rotable Flange LHCVFX___0016
1716 // Pos4 Fixed Flange LHCVFX___0006
1717 // Pos5 Bellow Tooling LHCVFX___0003
1721 ///////////////////////////////////
1722 // RB26/1-2 Vacuum Tubes //
1723 // Drawing LHCVC2a_0010 //
1724 ///////////////////////////////////
1725 const Float_t kRB26s12TubeL = 459.45; // 0.15 cm added for welding
1727 // Add 1 cm on outer diameter for insulation
1729 TGeoPcon* shRB26s12Tube = new TGeoPcon(0., 360., 5);
1730 // Section 1: straight section
1731 shRB26s12Tube->DefineSection(0, 0.00, 5.84/2., 6.00/2.);
1732 shRB26s12Tube->DefineSection(1, 207.21, 5.84/2., 6.00/2.);
1733 // Section 2: 0.72 deg opening cone
1734 shRB26s12Tube->DefineSection(2, 207.21, 5.84/2., 6.14/2.);
1735 shRB26s12Tube->DefineSection(3, 452.30, 12.00/2., 12.30/2.);
1736 shRB26s12Tube->DefineSection(4, kRB26s12TubeL, 12.00/2., 12.30/2.);
1737 TGeoVolume* voRB26s12Tube = new TGeoVolume("RB26s12Tube", shRB26s12Tube, kMedSteel);
1738 // Add the insulation layer
1739 TGeoVolume* voRB26s12TubeIns = new TGeoVolume("RB26s12TubeIns", MakeInsulationFromTemplate(shRB26s12Tube), kMedInsu);
1740 voRB26s12Tube->AddNode(voRB26s12TubeIns, 1, gGeoIdentity);
1743 TGeoVolume* voRB26s12TubeM = new TGeoVolume("RB26s12TubeM", MakeMotherFromTemplate(shRB26s12Tube), kMedVac);
1744 voRB26s12TubeM->AddNode(voRB26s12Tube, 1, gGeoIdentity);
1748 ///////////////////////////////////
1749 // RB26/2 Axial Compensator //
1750 // Drawing LHCVC2a_0064 //
1751 ///////////////////////////////////
1752 const Float_t kRB26s2CompL = 30.65; // Length of the compensator
1753 const Float_t kRB26s2BellowRo = 14.38/2.; // Bellow outer radius [Pos 1]
1754 const Float_t kRB26s2BellowRi = 12.12/2.; // Bellow inner radius [Pos 1]
1755 const Int_t kRB26s2NumberOfPlies = 14; // Number of plies [Pos 1]
1756 const Float_t kRB26s2BellowUndL = 10.00; // Length of undulated region [Pos 1] [+10 mm installed including pretension ?]
1757 const Float_t kRB26s2PlieThickness = 0.025; // Plie thickness [Pos 1]
1758 const Float_t kRB26s2ConnectionPlieR = 0.21; // Connection plie radius [Pos 1]
1760 const Float_t kRB26s2PlieR =
1761 (kRB26s2BellowUndL - 4. * kRB26s2ConnectionPlieR + 2. * kRB26s2PlieThickness +
1762 (2. * kRB26s2NumberOfPlies - 2.) * kRB26s2PlieThickness) / (4. * kRB26s2NumberOfPlies - 2.);
1763 const Float_t kRB26s2CompTubeInnerR = 12.00/2.; // Connection tubes inner radius [Pos 2 + 3]
1764 const Float_t kRB26s2CompTubeOuterR = 12.30/2.; // Connection tubes outer radius [Pos 2 + 3]
1765 const Float_t kRB26s2WeldingTubeLeftL = 9.00/2.; // Left connection tube half length [Pos 2]
1766 const Float_t kRB26s2WeldingTubeRightL = 11.65/2.; // Right connection tube half length [Pos 3] [+ 0.15 cm for welding]
1767 const Float_t kRB26s2RingOuterR = 18.10/2.; // Ring inner radius [Pos 4]
1768 const Float_t kRB26s2RingL = 0.40/2.; // Ring half length [Pos 4]
1769 const Float_t kRB26s2RingZ = 6.50 ; // Ring z-position [Pos 4]
1770 const Float_t kRB26s2ProtOuterR = 18.20/2.; // Protection tube outer radius [Pos 5]
1771 const Float_t kRB26s2ProtL = 15.00/2.; // Protection tube half length [Pos 5]
1772 const Float_t kRB26s2ProtZ = 6.70 ; // Protection tube z-position [Pos 5]
1777 TGeoPcon* shRB26s2Compensator = new TGeoPcon(0., 360., 6);
1778 shRB26s2Compensator->DefineSection( 0, 0.0, 0., kRB26s2CompTubeOuterR);
1779 shRB26s2Compensator->DefineSection( 1, kRB26s2RingZ, 0., kRB26s2CompTubeOuterR);
1780 shRB26s2Compensator->DefineSection( 2, kRB26s2RingZ, 0., kRB26s2ProtOuterR);
1781 shRB26s2Compensator->DefineSection( 3, kRB26s2ProtZ + 2. * kRB26s2ProtL, 0., kRB26s2ProtOuterR);
1782 shRB26s2Compensator->DefineSection( 4, kRB26s2ProtZ + 2. * kRB26s2ProtL, 0., kRB26s2CompTubeOuterR);
1783 shRB26s2Compensator->DefineSection( 5, kRB26s2CompL , 0., kRB26s2CompTubeOuterR);
1784 TGeoVolume* voRB26s2Compensator = new TGeoVolume("RB26s2Compensator", shRB26s2Compensator, kMedVac);
1790 TGeoVolume* voRB26s2Bellow = new TGeoVolume("RB26s2Bellow", new TGeoTube(kRB26s2BellowRi, kRB26s2BellowRo, kRB26s2BellowUndL/2.), kMedVac);
1792 // Upper part of the undulation
1794 TGeoTorus* shRB26s2PlieTorusU = new TGeoTorus(kRB26s2BellowRo - kRB26s2PlieR, kRB26s2PlieR - kRB26s2PlieThickness, kRB26s2PlieR);
1795 shRB26s2PlieTorusU->SetName("RB26s2TorusU");
1796 TGeoTube* shRB26s2PlieTubeU = new TGeoTube (kRB26s2BellowRo - kRB26s2PlieR, kRB26s2BellowRo, kRB26s2PlieR);
1797 shRB26s2PlieTubeU->SetName("RB26s2TubeU");
1798 TGeoCompositeShape* shRB26s2UpperPlie = new TGeoCompositeShape("RB26s2UpperPlie", "RB26s2TorusU*RB26s2TubeU");
1800 TGeoVolume* voRB26s2WiggleU = new TGeoVolume("RB26s2UpperPlie", shRB26s2UpperPlie, kMedSteel);
1802 // Lower part of the undulation
1803 TGeoTorus* shRB26s2PlieTorusL = new TGeoTorus(kRB26s2BellowRi + kRB26s2PlieR, kRB26s2PlieR - kRB26s2PlieThickness, kRB26s2PlieR);
1804 shRB26s2PlieTorusL->SetName("RB26s2TorusL");
1805 TGeoTube* shRB26s2PlieTubeL = new TGeoTube (kRB26s2BellowRi, kRB26s2BellowRi + kRB26s2PlieR, kRB26s2PlieR);
1806 shRB26s2PlieTubeL->SetName("RB26s2TubeL");
1807 TGeoCompositeShape* shRB26s2LowerPlie = new TGeoCompositeShape("RB26s2LowerPlie", "RB26s2TorusL*RB26s2TubeL");
1809 TGeoVolume* voRB26s2WiggleL = new TGeoVolume("RB26s2LowerPlie", shRB26s2LowerPlie, kMedSteel);
1812 // Connection between upper and lower part of undulation
1813 TGeoVolume* voRB26s2WiggleC1 = new TGeoVolume("RB26s2PlieConn1",
1814 new TGeoTube(kRB26s2BellowRi + kRB26s2PlieR,
1815 kRB26s2BellowRo - kRB26s2PlieR, kRB26s2PlieThickness / 2.), kMedSteel);
1818 TGeoVolumeAssembly* voRB26s2Wiggle = new TGeoVolumeAssembly("RB26s2Wiggle");
1819 z0 = - kRB26s2PlieThickness / 2.;
1820 voRB26s2Wiggle->AddNode(voRB26s2WiggleC1, 1 , new TGeoTranslation(0., 0., z0));
1821 z0 += kRB26s2PlieR - kRB26s2PlieThickness / 2.;
1822 voRB26s2Wiggle->AddNode(voRB26s2WiggleU, 1 , new TGeoTranslation(0., 0., z0));
1823 z0 += kRB26s2PlieR - kRB26s2PlieThickness / 2.;
1824 voRB26s2Wiggle->AddNode(voRB26s2WiggleC1, 2 , new TGeoTranslation(0., 0., z0));
1825 z0 += kRB26s2PlieR - kRB26s2PlieThickness;
1826 voRB26s2Wiggle->AddNode(voRB26s2WiggleL , 1 , new TGeoTranslation(0., 0., z0));
1827 // Positioning of the volumes
1828 z0 = - kRB26s2BellowUndL/2.+ kRB26s2ConnectionPlieR;
1829 voRB26s2Bellow->AddNode(voRB26s2WiggleL, 1, new TGeoTranslation(0., 0., z0));
1830 z0 += kRB26s2ConnectionPlieR;
1831 zsh = 4. * kRB26s2PlieR - 2. * kRB26s2PlieThickness;
1832 for (Int_t iw = 0; iw < kRB26s2NumberOfPlies; iw++) {
1833 Float_t zpos = z0 + iw * zsh;
1834 voRB26s2Bellow->AddNode(voRB26s2Wiggle, iw + 1, new TGeoTranslation(0., 0., zpos - kRB26s2PlieThickness));
1837 voRB26s2Compensator->AddNode(voRB26s2Bellow, 1, new TGeoTranslation(0., 0., 2. * kRB26s2WeldingTubeLeftL + kRB26s2BellowUndL/2.));
1840 // [Pos 2] Left Welding Tube
1842 TGeoTube* shRB26s2CompLeftTube = new TGeoTube(kRB26s2CompTubeInnerR, kRB26s2CompTubeOuterR, kRB26s2WeldingTubeLeftL);
1843 TGeoVolume* voRB26s2CompLeftTube = new TGeoVolume("RB26s2CompLeftTube", shRB26s2CompLeftTube, kMedSteel);
1844 voRB26s2Compensator->AddNode(voRB26s2CompLeftTube, 1, new TGeoTranslation(0., 0., kRB26s2WeldingTubeLeftL));
1846 // [Pos 3] Right Welding Tube
1848 TGeoTube* shRB26s2CompRightTube = new TGeoTube(kRB26s2CompTubeInnerR, kRB26s2CompTubeOuterR, kRB26s2WeldingTubeRightL);
1849 TGeoVolume* voRB26s2CompRightTube = new TGeoVolume("RB26s2CompRightTube", shRB26s2CompRightTube, kMedSteel);
1850 voRB26s2Compensator->AddNode(voRB26s2CompRightTube, 1, new TGeoTranslation(0., 0., kRB26s2CompL - kRB26s2WeldingTubeRightL));
1854 TGeoTube* shRB26s2CompRing = new TGeoTube(kRB26s2CompTubeOuterR, kRB26s2RingOuterR, kRB26s2RingL);
1855 TGeoVolume* voRB26s2CompRing = new TGeoVolume("RB26s2CompRing", shRB26s2CompRing, kMedSteel);
1856 voRB26s2Compensator->AddNode(voRB26s2CompRing, 1, new TGeoTranslation(0., 0., kRB26s2RingZ + kRB26s2RingL));
1859 // [Pos 5] Outer Protecting Tube
1861 TGeoTube* shRB26s2CompProtTube = new TGeoTube(kRB26s2RingOuterR, kRB26s2ProtOuterR, kRB26s2ProtL);
1862 TGeoVolume* voRB26s2CompProtTube = new TGeoVolume("RB26s2CompProtTube", shRB26s2CompProtTube, kMedSteel);
1863 voRB26s2Compensator->AddNode(voRB26s2CompProtTube, 1, new TGeoTranslation(0., 0., kRB26s2ProtZ + kRB26s2ProtL));
1865 ///////////////////////////////////
1866 // Rotable Flange //
1867 // Drawing LHCVFX_0016 //
1868 ///////////////////////////////////
1869 const Float_t kRB26s1RFlangeTubeRi = 5.84/2. ; // Tube inner radius
1870 const Float_t kRB26s1RFlangeTubeRo = 6.00/2. ; // Tube outer radius
1872 // Pos 1 Clamp Ring LHCVFX__0015
1873 const Float_t kRB26s1RFlangeCrL = 1.40 ; // Lenth of the clamp ring
1874 const Float_t kRB26s1RFlangeCrRi1 = 6.72/2. ; // Ring inner radius section 1
1875 const Float_t kRB26s1RFlangeCrRi2 = 6.06/2. ; // Ring inner radius section 2
1876 const Float_t kRB26s1RFlangeCrRo = 8.60/2. ; // Ring outer radius
1877 const Float_t kRB26s1RFlangeCrD = 0.800 ; // Width section 1
1879 TGeoPcon* shRB26s1RFlangeCr = new TGeoPcon(0., 360., 4);
1881 shRB26s1RFlangeCr->DefineSection(0, z0, kRB26s1RFlangeCrRi1, kRB26s1RFlangeCrRo);
1882 z0 += kRB26s1RFlangeCrD;
1883 shRB26s1RFlangeCr->DefineSection(1, z0, kRB26s1RFlangeCrRi1, kRB26s1RFlangeCrRo);
1884 shRB26s1RFlangeCr->DefineSection(2, z0, kRB26s1RFlangeCrRi2, kRB26s1RFlangeCrRo);
1885 z0 = kRB26s1RFlangeCrL;
1886 shRB26s1RFlangeCr->DefineSection(3, z0, kRB26s1RFlangeCrRi2, kRB26s1RFlangeCrRo);
1887 TGeoVolume* voRB26s1RFlangeCr =
1888 new TGeoVolume("RB26s1RFlangeCr", shRB26s1RFlangeCr, kMedSteel);
1890 // Pos 2 Insert LHCVFX__0015
1891 const Float_t kRB26s1RFlangeIsL = 4.88 ; // Lenth of the insert
1892 const Float_t kRB26s1RFlangeIsR = 6.70/2. ; // Ring radius
1893 const Float_t kRB26s1RFlangeIsD = 0.80 ; // Ring Width
1895 TGeoPcon* shRB26s1RFlangeIs = new TGeoPcon(0., 360., 4);
1897 shRB26s1RFlangeIs->DefineSection(0, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeIsR);
1898 z0 += kRB26s1RFlangeIsD;
1899 shRB26s1RFlangeIs->DefineSection(1, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeIsR);
1900 shRB26s1RFlangeIs->DefineSection(2, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeTubeRo);
1901 z0 = kRB26s1RFlangeIsL;
1902 shRB26s1RFlangeIs->DefineSection(3, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeTubeRo);
1903 TGeoVolume* voRB26s1RFlangeIs =
1904 new TGeoVolume("RB26s1RFlangeIs", shRB26s1RFlangeIs, kMedSteel);
1905 // 4.88 + 3.7 = 8.58 (8.7 to avoid overlap)
1906 // Pos 3 Fixed Point Section LHCVC2A_0021
1907 const Float_t kRB26s1RFlangeFpL = 5.88 ; // Length of the fixed point section (0.08 cm added for welding)
1908 const Float_t kRB26s1RFlangeFpZ = 3.82 ; // Position of the ring
1909 const Float_t kRB26s1RFlangeFpD = 0.59 ; // Width of the ring
1910 const Float_t kRB26s1RFlangeFpR = 7.00/2. ; // Radius of the ring
1912 TGeoPcon* shRB26s1RFlangeFp = new TGeoPcon(0., 360., 6);
1914 shRB26s1RFlangeFp->DefineSection(0, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeTubeRo);
1915 z0 += kRB26s1RFlangeFpZ;
1916 shRB26s1RFlangeFp->DefineSection(1, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeTubeRo);
1917 shRB26s1RFlangeFp->DefineSection(2, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeFpR);
1918 z0 += kRB26s1RFlangeFpD;
1919 shRB26s1RFlangeFp->DefineSection(3, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeFpR);
1920 shRB26s1RFlangeFp->DefineSection(4, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeTubeRo);
1921 z0 = kRB26s1RFlangeFpL;
1922 shRB26s1RFlangeFp->DefineSection(5, z0, kRB26s1RFlangeTubeRi, kRB26s1RFlangeTubeRo);
1923 TGeoVolume* voRB26s1RFlangeFp = new TGeoVolume("RB26s1RFlangeFp", shRB26s1RFlangeFp, kMedSteel);
1925 // Put everything in a mother volume
1926 TGeoPcon* shRB26s1RFlange = new TGeoPcon(0., 360., 8);
1928 shRB26s1RFlange->DefineSection(0, z0, 0., kRB26s1RFlangeCrRo);
1929 z0 += kRB26s1RFlangeCrL;
1930 shRB26s1RFlange->DefineSection(1, z0, 0., kRB26s1RFlangeCrRo);
1931 shRB26s1RFlange->DefineSection(2, z0, 0., kRB26s1RFlangeTubeRo);
1932 z0 = kRB26s1RFlangeIsL + kRB26s1RFlangeFpZ;
1933 shRB26s1RFlange->DefineSection(3, z0, 0., kRB26s1RFlangeTubeRo);
1934 shRB26s1RFlange->DefineSection(4, z0, 0., kRB26s1RFlangeFpR);
1935 z0 += kRB26s1RFlangeFpD;
1936 shRB26s1RFlange->DefineSection(5, z0, 0., kRB26s1RFlangeFpR);
1937 shRB26s1RFlange->DefineSection(6, z0, 0., kRB26s1RFlangeTubeRo);
1938 z0 = kRB26s1RFlangeIsL + kRB26s1RFlangeFpL;
1939 shRB26s1RFlange->DefineSection(7, z0, 0., kRB26s1RFlangeTubeRo);
1940 TGeoVolume* voRB26s1RFlange = new TGeoVolume("RB26s1RFlange", shRB26s1RFlange, kMedVac);
1942 voRB26s1RFlange->AddNode(voRB26s1RFlangeIs, 1, gGeoIdentity);
1943 voRB26s1RFlange->AddNode(voRB26s1RFlangeCr, 1, gGeoIdentity);
1944 voRB26s1RFlange->AddNode(voRB26s1RFlangeFp, 1, new TGeoTranslation(0., 0., kRB26s1RFlangeIsL));
1946 ///////////////////////////////////
1948 // Drawing LHCVFX_0006 //
1949 ///////////////////////////////////
1950 const Float_t kRB26s2FFlangeL = 2.13; // Length of the flange
1951 const Float_t kRB26s2FFlangeD1 = 0.97; // Length of section 1
1952 const Float_t kRB26s2FFlangeD2 = 0.29; // Length of section 2
1953 const Float_t kRB26s2FFlangeD3 = 0.87; // Length of section 3
1954 const Float_t kRB26s2FFlangeRo = 17.15/2.; // Flange outer radius
1955 const Float_t kRB26s2FFlangeRi1 = 12.30/2.; // Flange inner radius section 1
1956 const Float_t kRB26s2FFlangeRi2 = 12.00/2.; // Flange inner radius section 2
1957 const Float_t kRB26s2FFlangeRi3 = 12.30/2.; // Flange inner radius section 3
1959 TGeoPcon* shRB26s2FFlange = new TGeoPcon(0., 360., 6);
1961 shRB26s2FFlange->DefineSection(0, z0, kRB26s2FFlangeRi1, kRB26s2FFlangeRo);
1962 z0 += kRB26s2FFlangeD1;
1963 shRB26s2FFlange->DefineSection(1, z0, kRB26s2FFlangeRi1, kRB26s2FFlangeRo);
1964 shRB26s2FFlange->DefineSection(2, z0, kRB26s2FFlangeRi2, kRB26s2FFlangeRo);
1965 z0 += kRB26s2FFlangeD2;
1966 shRB26s2FFlange->DefineSection(3, z0, kRB26s2FFlangeRi2, kRB26s2FFlangeRo);
1967 shRB26s2FFlange->DefineSection(4, z0, kRB26s2FFlangeRi3, kRB26s2FFlangeRo);
1968 z0 += kRB26s2FFlangeD3;
1969 shRB26s2FFlange->DefineSection(5, z0, kRB26s2FFlangeRi3, kRB26s2FFlangeRo);
1970 TGeoVolume* voRB26s2FFlange = new TGeoVolume("RB26s2FFlange", shRB26s2FFlange, kMedSteel);
1972 TGeoVolume* voRB26s2FFlangeM = new TGeoVolume("RB26s2FFlangeM", MakeMotherFromTemplate(shRB26s2FFlange, 2, 5), kMedVac);
1973 voRB26s2FFlangeM->AddNode(voRB26s2FFlange, 1, gGeoIdentity);
1977 ////////////////////////////////////////
1980 // Drawing LHCV2a_0048 //
1981 // Drawing LHCV2a_0002 //
1982 ////////////////////////////////////////
1984 // Pos 1 Vacuum Tubes LHCVC2A__0003
1985 // Pos 2 Fixed Point LHCVFX___0005
1986 // Pos 3 Split Flange LHCVFX___0007
1987 // Pos 4 Fixed Flange LHCVFX___0004
1988 // Pos 5 Axial Compensator LHCVC2A__0065
1993 ///////////////////////////////////
1995 // Drawing LHCVC2A_0003 //
1996 ///////////////////////////////////
1997 const Float_t kRB26s3TubeL = 629.35 + 0.3; // 0.3 cm added for welding
1998 const Float_t kRB26s3TubeR1 = 12./2.;
1999 const Float_t kRB26s3TubeR2 = kRB26s3TubeR1 + 215.8 * TMath::Tan(0.829 / 180. * TMath::Pi());
2002 TGeoPcon* shRB26s3Tube = new TGeoPcon(0., 360., 7);
2003 // Section 1: straight section
2004 shRB26s3Tube->DefineSection(0, 0.00, kRB26s3TubeR1, kRB26s3TubeR1 + 0.15);
2005 shRB26s3Tube->DefineSection(1, 2.00, kRB26s3TubeR1, kRB26s3TubeR1 + 0.15);
2006 // Section 2: 0.829 deg opening cone
2007 shRB26s3Tube->DefineSection(2, 2.00, kRB26s3TubeR1, kRB26s3TubeR1 + 0.20);
2009 shRB26s3Tube->DefineSection(3, 217.80, kRB26s3TubeR2, kRB26s3TubeR2 + 0.20);
2010 shRB26s3Tube->DefineSection(4, 217.80, kRB26s3TubeR2, kRB26s3TubeR2 + 0.30);
2012 shRB26s3Tube->DefineSection(5, 622.20, 30.00/2., 30.60/2.);
2013 shRB26s3Tube->DefineSection(6, kRB26s3TubeL, 30.00/2., 30.60/2.);
2015 TGeoVolume* voRB26s3Tube = new TGeoVolume("RB26s3Tube", shRB26s3Tube, kMedSteel);
2016 // Add the insulation layer
2017 TGeoVolume* voRB26s3TubeIns = new TGeoVolume("RB26s3TubeIns", MakeInsulationFromTemplate(shRB26s3Tube), kMedInsu);
2018 voRB26s3Tube->AddNode(voRB26s3TubeIns, 1, gGeoIdentity);
2020 TGeoVolume* voRB26s3TubeM = new TGeoVolume("RB26s3TubeM", MakeMotherFromTemplate(shRB26s3Tube), kMedVac);
2021 voRB26s3TubeM->AddNode(voRB26s3Tube, 1, gGeoIdentity);
2025 ///////////////////////////////////
2027 // Drawing LHCVFX_0005 //
2028 ///////////////////////////////////
2029 const Float_t kRB26s3FixedPointL = 16.37 ; // Length of the fixed point section (0.3 cm added for welding)
2030 const Float_t kRB26s3FixedPointZ = 9.72 ; // Position of the ring (0.15 cm added for welding)
2031 const Float_t kRB26s3FixedPointD = 0.595 ; // Width of the ring
2032 const Float_t kRB26s3FixedPointR = 13.30/2. ; // Radius of the ring
2033 const Float_t kRB26s3FixedPointRi = 12.00/2. ; // Inner radius of the tube
2034 const Float_t kRB26s3FixedPointRo1 = 12.30/2. ; // Outer radius of the tube (in)
2035 const Float_t kRB26s3FixedPointRo2 = 12.40/2. ; // Outer radius of the tube (out)
2036 const Float_t kRB26s3FixedPointDs = 1.5 ; // Width of straight section behind ring
2037 const Float_t kRB26s3FixedPointDc = 3.15 ; // Width of conical section behind ring (0.15 cm added for welding)
2039 TGeoPcon* shRB26s3FixedPoint = new TGeoPcon(0., 360., 8);
2041 shRB26s3FixedPoint->DefineSection(0, z0, kRB26s3FixedPointRi, kRB26s3FixedPointRo1);
2042 z0 += kRB26s3FixedPointZ;
2043 shRB26s3FixedPoint->DefineSection(1, z0, kRB26s3FixedPointRi, kRB26s3FixedPointRo1);
2044 shRB26s3FixedPoint->DefineSection(2, z0, kRB26s3FixedPointRi, kRB26s3FixedPointR);
2045 z0 += kRB26s3FixedPointD;
2046 shRB26s3FixedPoint->DefineSection(3, z0, kRB26s3FixedPointRi, kRB26s3FixedPointR);
2047 shRB26s3FixedPoint->DefineSection(4, z0, kRB26s3FixedPointRi, kRB26s3FixedPointRo1);
2048 z0 += kRB26s3FixedPointDs;
2049 shRB26s3FixedPoint->DefineSection(5, z0, kRB26s3FixedPointRi, kRB26s3FixedPointRo1);
2050 z0 += kRB26s3FixedPointDc;
2051 shRB26s3FixedPoint->DefineSection(6, z0, kRB26s3FixedPointRi, kRB26s3FixedPointRo2);
2052 z0 = kRB26s3FixedPointL;
2053 shRB26s3FixedPoint->DefineSection(7, z0, kRB26s3FixedPointRi, kRB26s3FixedPointRo2);
2054 TGeoVolume* voRB26s3FixedPoint = new TGeoVolume("RB26s3FixedPoint", shRB26s3FixedPoint, kMedSteel);
2056 TGeoVolume* voRB26s3FixedPointM = new TGeoVolume("RB26s3FixedPointM", MakeMotherFromTemplate(shRB26s3FixedPoint), kMedVac);
2057 voRB26s3FixedPointM->AddNode(voRB26s3FixedPoint, 1, gGeoIdentity);
2059 ///////////////////////////////////
2061 // Drawing LHCVFX_0005 //
2062 ///////////////////////////////////
2063 const Float_t kRB26s3SFlangeL = 2.13; // Length of the flange
2064 const Float_t kRB26s3SFlangeD1 = 0.57; // Length of section 1
2065 const Float_t kRB26s3SFlangeD2 = 0.36; // Length of section 2
2066 const Float_t kRB26s3SFlangeD3 = 0.50 + 0.70; // Length of section 3
2067 const Float_t kRB26s3SFlangeRo = 17.15/2.; // Flange outer radius
2068 const Float_t kRB26s3SFlangeRi1 = 12.30/2.; // Flange inner radius section 1
2069 const Float_t kRB26s3SFlangeRi2 = 12.00/2.; // Flange inner radius section 2
2070 const Float_t kRB26s3SFlangeRi3 = 12.30/2.; // Flange inner radius section 3
2072 TGeoPcon* shRB26s3SFlange = new TGeoPcon(0., 360., 6);
2074 shRB26s3SFlange->DefineSection(0, z0, kRB26s3SFlangeRi1, kRB26s3SFlangeRo);
2075 z0 += kRB26s3SFlangeD1;
2076 shRB26s3SFlange->DefineSection(1, z0, kRB26s3SFlangeRi1, kRB26s3SFlangeRo);
2077 shRB26s3SFlange->DefineSection(2, z0, kRB26s3SFlangeRi2, kRB26s3SFlangeRo);
2078 z0 += kRB26s3SFlangeD2;
2079 shRB26s3SFlange->DefineSection(3, z0, kRB26s3SFlangeRi2, kRB26s3SFlangeRo);
2080 shRB26s3SFlange->DefineSection(4, z0, kRB26s3SFlangeRi3, kRB26s3SFlangeRo);
2081 z0 += kRB26s3SFlangeD3;
2082 shRB26s3SFlange->DefineSection(5, z0, kRB26s3SFlangeRi3, kRB26s3SFlangeRo);
2083 TGeoVolume* voRB26s3SFlange = new TGeoVolume("RB26s3SFlange", shRB26s3SFlange, kMedSteel);
2085 TGeoVolume* voRB26s3SFlangeM = new TGeoVolume("RB26s3SFlangeM", MakeMotherFromTemplate(shRB26s3SFlange, 0, 3), kMedVac);
2086 voRB26s3SFlangeM->AddNode(voRB26s3SFlange, 1, gGeoIdentity);
2088 ///////////////////////////////////
2089 // RB26/3 Fixed Flange //
2090 // Drawing LHCVFX___0004 //
2091 ///////////////////////////////////
2092 const Float_t kRB26s3FFlangeL = 2.99; // Length of the flange
2093 const Float_t kRB26s3FFlangeD1 = 1.72; // Length of section 1
2094 const Float_t kRB26s3FFlangeD2 = 0.30; // Length of section 2
2095 const Float_t kRB26s3FFlangeD3 = 0.97; // Length of section 3
2096 const Float_t kRB26s3FFlangeRo = 36.20/2.; // Flange outer radius
2097 const Float_t kRB26s3FFlangeRi1 = 30.60/2.; // Flange inner radius section 1
2098 const Float_t kRB26s3FFlangeRi2 = 30.00/2.; // Flange inner radius section 2
2099 const Float_t kRB26s3FFlangeRi3 = 30.60/2.; // Flange inner radius section 3
2101 TGeoPcon* shRB26s3FFlange = new TGeoPcon(0., 360., 6);
2103 shRB26s3FFlange->DefineSection(0, z0, kRB26s3FFlangeRi1, kRB26s3FFlangeRo);
2104 z0 += kRB26s3FFlangeD1;
2105 shRB26s3FFlange->DefineSection(1, z0, kRB26s3FFlangeRi1, kRB26s3FFlangeRo);
2106 shRB26s3FFlange->DefineSection(2, z0, kRB26s3FFlangeRi2, kRB26s3FFlangeRo);
2107 z0 += kRB26s3FFlangeD2;
2108 shRB26s3FFlange->DefineSection(3, z0, kRB26s3FFlangeRi2, kRB26s3FFlangeRo);
2109 shRB26s3FFlange->DefineSection(4, z0, kRB26s3FFlangeRi3, kRB26s3FFlangeRo);
2110 z0 += kRB26s3FFlangeD3;
2111 shRB26s3FFlange->DefineSection(5, z0, kRB26s3FFlangeRi3, kRB26s3FFlangeRo);
2112 TGeoVolume* voRB26s3FFlange = new TGeoVolume("RB26s3FFlange", shRB26s3FFlange, kMedSteel);
2114 TGeoVolume* voRB26s3FFlangeM = new TGeoVolume("RB26s3FFlangeM", MakeMotherFromTemplate(shRB26s3FFlange, 2, 5), kMedVac);
2115 voRB26s3FFlangeM->AddNode(voRB26s3FFlange, 1, gGeoIdentity);
2119 ///////////////////////////////////
2120 // RB26/3 Axial Compensator //
2121 // Drawing LHCVC2a_0065 //
2122 ///////////////////////////////////
2123 const Float_t kRB26s3CompL = 42.0; // Length of the compensator (0.3 cm added for welding)
2124 const Float_t kRB26s3BellowRo = 34.00/2.; // Bellow outer radius [Pos 1]
2125 const Float_t kRB26s3BellowRi = 30.10/2.; // Bellow inner radius [Pos 1]
2126 const Int_t kRB26s3NumberOfPlies = 13; // Number of plies [Pos 1]
2127 const Float_t kRB26s3BellowUndL = 17.70; // Length of undulated region [Pos 1]
2128 const Float_t kRB26s3PlieThickness = 0.06; // Plie thickness [Pos 1]
2129 const Float_t kRB26s3ConnectionPlieR = 0.21; // Connection plie radius [Pos 1]
2131 const Float_t kRB26s3PlieR =
2132 (kRB26s3BellowUndL - 4. * kRB26s3ConnectionPlieR + 2. * kRB26s3PlieThickness +
2133 (2. * kRB26s3NumberOfPlies - 2.) * kRB26s3PlieThickness) / (4. * kRB26s3NumberOfPlies - 2.);
2136 // The welding tubes have 3 sections with different radii and 2 transition regions.
2137 // Section 1: connection to the outside
2138 // Section 2: commection to the bellow
2139 // Section 3: between 1 and 2
2140 const Float_t kRB26s3CompTubeInnerR1 = 30.0/2.; // Outer Connection tubes inner radius [Pos 4 + 3]
2141 const Float_t kRB26s3CompTubeOuterR1 = 30.6/2.; // Outer Connection tubes outer radius [Pos 4 + 3]
2142 const Float_t kRB26s3CompTubeInnerR2 = 29.4/2.; // Connection tubes inner radius [Pos 4 + 3]
2143 const Float_t kRB26s3CompTubeOuterR2 = 30.0/2.; // Connection tubes outer radius [Pos 4 + 3]
2144 const Float_t kRB26s3CompTubeInnerR3 = 30.6/2.; // Connection tubes inner radius at bellow [Pos 4 + 3]
2145 const Float_t kRB26s3CompTubeOuterR3 = 32.2/2.; // Connection tubes outer radius at bellow [Pos 4 + 3]
2147 const Float_t kRB26s3WeldingTubeLeftL1 = 2.0; // Left connection tube length [Pos 4]
2148 const Float_t kRB26s3WeldingTubeLeftL2 = 3.4; // Left connection tube length [Pos 4]
2149 const Float_t kRB26s3WeldingTubeLeftL = 7.0; // Left connection tube total length [Pos 4]
2150 const Float_t kRB26s3WeldingTubeRightL1 = 2.3; // Right connection tube length [Pos 3] (0.3 cm added for welding)
2151 const Float_t kRB26s3WeldingTubeRightL2 = 13.4; // Right connection tube length [Pos 3]
2153 const Float_t kRB26s3WeldingTubeT1 = 0.6; // Length of first r-transition [Pos 4 + 3]
2154 const Float_t kRB26s3WeldingTubeT2 = 1.0; // Length of 2nd r-transition [Pos 4 + 3]
2158 const Float_t kRB26s3RingOuterR = 36.1/2.; // Ring inner radius [Pos 4]
2159 const Float_t kRB26s3RingL = 0.8/2.; // Ring half length [Pos 4]
2160 const Float_t kRB26s3RingZ = 3.7 ; // Ring z-position [Pos 4]
2161 const Float_t kRB26s3ProtOuterR = 36.2/2.; // Protection tube outer radius [Pos 2]
2162 const Float_t kRB26s3ProtL = 27.0/2.; // Protection tube half length [Pos 2]
2163 const Float_t kRB26s3ProtZ = 4.0 ; // Protection tube z-position [Pos 2]
2168 TGeoPcon* shRB26s3Compensator = new TGeoPcon(0., 360., 6);
2169 shRB26s3Compensator->DefineSection( 0, 0.0, 0., kRB26s3CompTubeOuterR1);
2170 shRB26s3Compensator->DefineSection( 1, kRB26s3RingZ, 0., kRB26s3CompTubeOuterR1);
2171 shRB26s3Compensator->DefineSection( 2, kRB26s3RingZ, 0., kRB26s3ProtOuterR);
2172 shRB26s3Compensator->DefineSection( 3, kRB26s3ProtZ + 2. * kRB26s3ProtL, 0., kRB26s3ProtOuterR);
2173 shRB26s3Compensator->DefineSection( 4, kRB26s3ProtZ + 2. * kRB26s3ProtL, 0., kRB26s3CompTubeOuterR1);
2174 shRB26s3Compensator->DefineSection( 5, kRB26s3CompL , 0., kRB26s3CompTubeOuterR1);
2175 TGeoVolume* voRB26s3Compensator =
2176 new TGeoVolume("RB26s3Compensator", shRB26s3Compensator, kMedVac);
2182 TGeoVolume* voRB26s3Bellow = new TGeoVolume("RB26s3Bellow",
2183 new TGeoTube(kRB26s3BellowRi, kRB26s3BellowRo, kRB26s3BellowUndL/2.), kMedVac);
2185 // Upper part of the undulation
2187 TGeoTorus* shRB26s3PlieTorusU = new TGeoTorus(kRB26s3BellowRo - kRB26s3PlieR, kRB26s3PlieR - kRB26s3PlieThickness, kRB26s3PlieR);
2188 shRB26s3PlieTorusU->SetName("RB26s3TorusU");
2189 TGeoTube* shRB26s3PlieTubeU = new TGeoTube (kRB26s3BellowRo - kRB26s3PlieR, kRB26s3BellowRo, kRB26s3PlieR);
2190 shRB26s3PlieTubeU->SetName("RB26s3TubeU");
2191 TGeoCompositeShape* shRB26s3UpperPlie = new TGeoCompositeShape("RB26s3UpperPlie", "RB26s3TorusU*RB26s3TubeU");
2193 TGeoVolume* voRB26s3WiggleU = new TGeoVolume("RB26s3UpperPlie", shRB26s3UpperPlie, kMedSteel);
2195 // Lower part of the undulation
2196 TGeoTorus* shRB26s3PlieTorusL = new TGeoTorus(kRB26s3BellowRi + kRB26s3PlieR, kRB26s3PlieR - kRB26s3PlieThickness, kRB26s3PlieR);
2197 shRB26s3PlieTorusL->SetName("RB26s3TorusL");
2198 TGeoTube* shRB26s3PlieTubeL = new TGeoTube (kRB26s3BellowRi, kRB26s3BellowRi + kRB26s3PlieR, kRB26s3PlieR);
2199 shRB26s3PlieTubeL->SetName("RB26s3TubeL");
2200 TGeoCompositeShape* shRB26s3LowerPlie = new TGeoCompositeShape("RB26s3LowerPlie", "RB26s3TorusL*RB26s3TubeL");
2202 TGeoVolume* voRB26s3WiggleL = new TGeoVolume("RB26s3LowerPlie", shRB26s3LowerPlie, kMedSteel);
2205 // Connection between upper and lower part of undulation
2206 TGeoVolume* voRB26s3WiggleC1 = new TGeoVolume("RB26s3PlieConn1",
2207 new TGeoTube(kRB26s3BellowRi + kRB26s3PlieR,
2208 kRB26s3BellowRo - kRB26s3PlieR, kRB26s3PlieThickness / 2.), kMedSteel);
2211 TGeoVolumeAssembly* voRB26s3Wiggle = new TGeoVolumeAssembly("RB26s3Wiggle");
2212 z0 = - kRB26s3PlieThickness / 2.;
2213 voRB26s3Wiggle->AddNode(voRB26s3WiggleC1, 1 , new TGeoTranslation(0., 0., z0));
2214 z0 += kRB26s3PlieR - kRB26s3PlieThickness / 2.;
2215 voRB26s3Wiggle->AddNode(voRB26s3WiggleU, 1 , new TGeoTranslation(0., 0., z0));
2216 z0 += kRB26s3PlieR - kRB26s3PlieThickness / 2.;
2217 voRB26s3Wiggle->AddNode(voRB26s3WiggleC1, 2 , new TGeoTranslation(0., 0., z0));
2218 z0 += kRB26s3PlieR - kRB26s3PlieThickness;
2219 voRB26s3Wiggle->AddNode(voRB26s3WiggleL, 1 , new TGeoTranslation(0., 0., z0));
2220 // Positioning of the volumes
2221 z0 = - kRB26s3BellowUndL/2.+ kRB26s3ConnectionPlieR;
2222 voRB26s3Bellow->AddNode(voRB26s3WiggleL, 1, new TGeoTranslation(0., 0., z0));
2223 z0 += kRB26s3ConnectionPlieR;
2224 zsh = 4. * kRB26s3PlieR - 2. * kRB26s3PlieThickness;
2225 for (Int_t iw = 0; iw < kRB26s3NumberOfPlies; iw++) {
2226 Float_t zpos = z0 + iw * zsh;
2227 voRB26s3Bellow->AddNode(voRB26s3Wiggle, iw + 1, new TGeoTranslation(0., 0., zpos - kRB26s3PlieThickness));
2230 voRB26s3Compensator->AddNode(voRB26s3Bellow, 1, new TGeoTranslation(0., 0., kRB26s3WeldingTubeLeftL + kRB26s3BellowUndL/2.));
2234 // [Pos 2] Outer Protecting Tube
2236 TGeoTube* shRB26s3CompProtTube = new TGeoTube(kRB26s3RingOuterR, kRB26s3ProtOuterR, kRB26s3ProtL);
2237 TGeoVolume* voRB26s3CompProtTube =
2238 new TGeoVolume("RB26s3CompProtTube", shRB26s3CompProtTube, kMedSteel);
2239 voRB26s3Compensator->AddNode(voRB26s3CompProtTube, 1, new TGeoTranslation(0., 0., kRB26s3ProtZ + kRB26s3ProtL));
2243 // [Pos 3] Right Welding Tube
2245 TGeoPcon* shRB26s3CompRightTube = new TGeoPcon(0., 360., 5);
2247 shRB26s3CompRightTube->DefineSection(0, z0, kRB26s3CompTubeInnerR3, kRB26s3CompTubeOuterR3);
2248 z0 += kRB26s3WeldingTubeT2;
2249 shRB26s3CompRightTube->DefineSection(1, z0, kRB26s3CompTubeInnerR2, kRB26s3CompTubeOuterR2);
2250 z0 += kRB26s3WeldingTubeRightL2;
2251 shRB26s3CompRightTube->DefineSection(2, z0, kRB26s3CompTubeInnerR2, kRB26s3CompTubeOuterR2);
2252 z0 += kRB26s3WeldingTubeT1;
2253 shRB26s3CompRightTube->DefineSection(3, z0, kRB26s3CompTubeInnerR1, kRB26s3CompTubeOuterR1);
2254 z0 += kRB26s3WeldingTubeRightL1;
2255 shRB26s3CompRightTube->DefineSection(4, z0, kRB26s3CompTubeInnerR1, kRB26s3CompTubeOuterR1);
2257 TGeoVolume* voRB26s3CompRightTube =
2258 new TGeoVolume("RB26s3CompRightTube", shRB26s3CompRightTube, kMedSteel);
2259 voRB26s3Compensator->AddNode(voRB26s3CompRightTube, 1, new TGeoTranslation(0., 0., kRB26s3CompL - z0));
2262 // [Pos 4] Left Welding Tube
2264 TGeoPcon* shRB26s3CompLeftTube = new TGeoPcon(0., 360., 5);
2266 shRB26s3CompLeftTube->DefineSection(0, z0, kRB26s3CompTubeInnerR1, kRB26s3CompTubeOuterR1);
2267 z0 += kRB26s3WeldingTubeLeftL1;
2268 shRB26s3CompLeftTube->DefineSection(1, z0, kRB26s3CompTubeInnerR1, kRB26s3CompTubeOuterR1);
2269 z0 += kRB26s3WeldingTubeT1;
2270 shRB26s3CompLeftTube->DefineSection(2, z0, kRB26s3CompTubeInnerR2, kRB26s3CompTubeOuterR2);
2271 z0 += kRB26s3WeldingTubeLeftL2;
2272 shRB26s3CompLeftTube->DefineSection(3, z0, kRB26s3CompTubeInnerR2, kRB26s3CompTubeOuterR2);
2273 z0 += kRB26s3WeldingTubeT2;
2274 shRB26s3CompLeftTube->DefineSection(4, z0, kRB26s3CompTubeInnerR3, kRB26s3CompTubeOuterR3);
2276 TGeoVolume* voRB26s3CompLeftTube =
2277 new TGeoVolume("RB26s3CompLeftTube", shRB26s3CompLeftTube, kMedSteel);
2278 voRB26s3Compensator->AddNode(voRB26s3CompLeftTube, 1, gGeoIdentity);
2282 TGeoTube* shRB26s3CompRing = new TGeoTube(kRB26s3CompTubeOuterR2, kRB26s3RingOuterR, kRB26s3RingL);
2283 TGeoVolume* voRB26s3CompRing =
2284 new TGeoVolume("RB26s3CompRing", shRB26s3CompRing, kMedSteel);
2285 voRB26s3Compensator->AddNode(voRB26s3CompRing, 1, new TGeoTranslation(0., 0., kRB26s3RingZ + kRB26s3RingL));
2289 ///////////////////////////////////////////
2292 // Drawing LHCV2a_0012 [as installed] //
2293 ////////////////////////////////////////////
2294 // Pos1 Vacuum Tubes LHCVC2A__0014
2295 // Pos2 Compensator LHCVC2A__0066
2296 // Pos3 Fixed Point Section LHCVC2A__0016
2297 // Pos4 Split Flange LHCVFX___0005
2298 // Pos5 RotableFlange LHCVFX___0009
2299 ////////////////////////////////////////////
2301 ///////////////////////////////////
2302 // RB26/4-5 Vacuum Tubes //
2303 // Drawing LHCVC2a_0014 //
2304 ///////////////////////////////////
2305 const Float_t kRB26s45TubeL = 593.12 + 0.3; // 0.3 cm added for welding
2307 TGeoPcon* shRB26s45Tube = new TGeoPcon(0., 360., 11);
2308 // Section 1: straight section
2309 shRB26s45Tube->DefineSection( 0, 0.00, 30.00/2., 30.60/2.);
2310 shRB26s45Tube->DefineSection( 1, 1.20, 30.00/2., 30.60/2.);
2311 shRB26s45Tube->DefineSection( 2, 1.20, 30.00/2., 30.80/2.);
2312 shRB26s45Tube->DefineSection( 3, 25.10, 30.00/2., 30.80/2.);
2313 // Section 2: 0.932 deg opening cone
2314 shRB26s45Tube->DefineSection( 4, 486.10, 45.00/2., 45.80/2.);
2315 // Section 3: straight section 4 mm
2316 shRB26s45Tube->DefineSection( 5, 512.10, 45.00/2., 45.80/2.);
2317 // Section 4: straight section 3 mm
2318 shRB26s45Tube->DefineSection( 6, 512.10, 45.00/2., 45.60/2.);
2319 shRB26s45Tube->DefineSection( 7, 527.70, 45.00/2., 45.60/2.);
2320 // Section 4: closing cone
2321 shRB26s45Tube->DefineSection( 8, 591.30, 10.00/2., 10.60/2.);
2322 shRB26s45Tube->DefineSection( 9, 591.89, 10.00/2., 10.30/2.);
2324 shRB26s45Tube->DefineSection(10, kRB26s45TubeL, 10.00/2., 10.30/2.);
2325 TGeoVolume* voRB26s45Tube =
2326 new TGeoVolume("RB26s45Tube", shRB26s45Tube, kMedSteel);
2328 TGeoVolume* voRB26s45TubeM = new TGeoVolume("RB26s45TubeM", MakeMotherFromTemplate(shRB26s45Tube), kMedVac);
2329 voRB26s45TubeM->AddNode(voRB26s45Tube, 1, gGeoIdentity);
2333 ///////////////////////////////////
2334 // RB26/5 Axial Compensator //
2335 // Drawing LHCVC2a_0066 //
2336 ///////////////////////////////////
2337 const Float_t kRB26s5CompL = 27.60; // Length of the compensator (0.30 cm added for welding)
2338 const Float_t kRB26s5BellowRo = 12.48/2.; // Bellow outer radius [Pos 1]
2339 const Float_t kRB26s5BellowRi = 10.32/2.; // Bellow inner radius [Pos 1]
2340 const Int_t kRB26s5NumberOfPlies = 15; // Number of plies [Pos 1]
2341 const Float_t kRB26s5BellowUndL = 10.50; // Length of undulated region [Pos 1]
2342 const Float_t kRB26s5PlieThickness = 0.025; // Plie thickness [Pos 1]
2343 const Float_t kRB26s5ConnectionPlieR = 0.21; // Connection plie radius [Pos 1]
2344 const Float_t kRB26s5ConnectionR = 11.2/2.; // Bellow connection radius [Pos 1]
2346 const Float_t kRB26s5PlieR =
2347 (kRB26s5BellowUndL - 4. * kRB26s5ConnectionPlieR + 2. * kRB26s5PlieThickness +
2348 (2. * kRB26s5NumberOfPlies - 2.) * kRB26s5PlieThickness) / (4. * kRB26s5NumberOfPlies - 2.);
2349 const Float_t kRB26s5CompTubeInnerR = 10.00/2.; // Connection tubes inner radius [Pos 2 + 3]
2350 const Float_t kRB26s5CompTubeOuterR = 10.30/2.; // Connection tubes outer radius [Pos 2 + 3]
2351 const Float_t kRB26s5WeldingTubeLeftL = 3.70/2.; // Left connection tube half length [Pos 2]
2352 const Float_t kRB26s5WeldingTubeRightL = 13.40/2.; // Right connection tube half length [Pos 3] (0.3 cm added for welding)
2353 const Float_t kRB26s5RingInnerR = 11.2/2.; // Ring inner radius [Pos 4]
2354 const Float_t kRB26s5RingOuterR = 16.0/2.; // Ring inner radius [Pos 4]
2355 const Float_t kRB26s5RingL = 0.4/2.; // Ring half length [Pos 4]
2356 const Float_t kRB26s5RingZ = 14.97; // Ring z-position [Pos 4]
2357 const Float_t kRB26s5ProtOuterR = 16.2/2.; // Protection tube outer radius [Pos 5]
2358 const Float_t kRB26s5ProtL = 13.0/2.; // Protection tube half length [Pos 5]
2359 const Float_t kRB26s5ProtZ = 2.17; // Protection tube z-position [Pos 5]
2360 const Float_t kRB26s5DetailZR = 11.3/2.; // Detail Z max radius
2365 TGeoPcon* shRB26s5Compensator = new TGeoPcon(0., 360., 8);
2366 shRB26s5Compensator->DefineSection( 0, 0.0, 0., kRB26s5CompTubeOuterR);
2367 shRB26s5Compensator->DefineSection( 1, kRB26s5ProtZ, 0., kRB26s5CompTubeOuterR);
2368 shRB26s5Compensator->DefineSection( 2, kRB26s5ProtZ, 0., kRB26s5ProtOuterR);
2369 shRB26s5Compensator->DefineSection( 3, kRB26s5ProtZ + 2. * kRB26s5ProtL + 2. * kRB26s5RingL, 0., kRB26s5ProtOuterR);
2370 shRB26s5Compensator->DefineSection( 4, kRB26s5ProtZ + 2. * kRB26s5ProtL + 2. * kRB26s5RingL, 0., kRB26s5DetailZR);
2371 shRB26s5Compensator->DefineSection( 5, kRB26s5CompL - 8., 0., kRB26s5DetailZR);
2372 shRB26s5Compensator->DefineSection( 6, kRB26s5CompL - 8., 0., kRB26s5CompTubeOuterR);
2373 shRB26s5Compensator->DefineSection( 7, kRB26s5CompL, 0., kRB26s5CompTubeOuterR);
2374 TGeoVolume* voRB26s5Compensator = new TGeoVolume("RB26s5Compensator", shRB26s5Compensator, kMedVac);
2380 TGeoVolume* voRB26s5Bellow = new TGeoVolume("RB26s5Bellow",
2381 new TGeoTube(kRB26s5BellowRi, kRB26s5BellowRo, kRB26s5BellowUndL/2.), kMedVac);
2383 // Upper part of the undulation
2385 TGeoTorus* shRB26s5PlieTorusU = new TGeoTorus(kRB26s5BellowRo - kRB26s5PlieR, kRB26s5PlieR - kRB26s5PlieThickness, kRB26s5PlieR);
2386 shRB26s5PlieTorusU->SetName("RB26s5TorusU");
2387 TGeoTube* shRB26s5PlieTubeU = new TGeoTube (kRB26s5BellowRo - kRB26s5PlieR, kRB26s5BellowRo, kRB26s5PlieR);
2388 shRB26s5PlieTubeU->SetName("RB26s5TubeU");
2389 TGeoCompositeShape* shRB26s5UpperPlie = new TGeoCompositeShape("RB26s5UpperPlie", "RB26s5TorusU*RB26s5TubeU");
2391 TGeoVolume* voRB26s5WiggleU = new TGeoVolume("RB26s5UpperPlie", shRB26s5UpperPlie, kMedSteel);
2393 // Lower part of the undulation
2394 TGeoTorus* shRB26s5PlieTorusL = new TGeoTorus(kRB26s5BellowRi + kRB26s5PlieR, kRB26s5PlieR - kRB26s5PlieThickness, kRB26s5PlieR);
2395 shRB26s5PlieTorusL->SetName("RB26s5TorusL");
2396 TGeoTube* shRB26s5PlieTubeL = new TGeoTube (kRB26s5BellowRi, kRB26s5BellowRi + kRB26s5PlieR, kRB26s5PlieR);
2397 shRB26s5PlieTubeL->SetName("RB26s5TubeL");
2398 TGeoCompositeShape* shRB26s5LowerPlie = new TGeoCompositeShape("RB26s5LowerPlie", "RB26s5TorusL*RB26s5TubeL");
2400 TGeoVolume* voRB26s5WiggleL = new TGeoVolume("RB26s5LowerPlie", shRB26s5LowerPlie, kMedSteel);
2403 // Connection between upper and lower part of undulation
2404 TGeoVolume* voRB26s5WiggleC1 = new TGeoVolume("RB26s5PlieConn1",
2405 new TGeoTube(kRB26s5BellowRi + kRB26s5PlieR,
2406 kRB26s5BellowRo - kRB26s5PlieR, kRB26s5PlieThickness / 2.), kMedSteel);
2409 TGeoVolumeAssembly* voRB26s5Wiggle = new TGeoVolumeAssembly("RB26s5Wiggle");
2410 z0 = - kRB26s5PlieThickness / 2.;
2411 voRB26s5Wiggle->AddNode(voRB26s5WiggleC1, 1 , new TGeoTranslation(0., 0., z0));
2412 z0 += kRB26s5PlieR - kRB26s5PlieThickness / 2.;
2413 voRB26s5Wiggle->AddNode(voRB26s5WiggleU, 1 , new TGeoTranslation(0., 0., z0));
2414 z0 += kRB26s5PlieR - kRB26s5PlieThickness / 2.;
2415 voRB26s5Wiggle->AddNode(voRB26s5WiggleC1, 2 , new TGeoTranslation(0., 0., z0));
2416 z0 += kRB26s5PlieR - kRB26s5PlieThickness;
2417 voRB26s5Wiggle->AddNode(voRB26s5WiggleL , 1 , new TGeoTranslation(0., 0., z0));
2418 // Positioning of the volumes
2419 z0 = - kRB26s5BellowUndL/2.+ kRB26s5ConnectionPlieR;
2420 voRB26s5Bellow->AddNode(voRB26s5WiggleL, 1, new TGeoTranslation(0., 0., z0));
2421 z0 += kRB26s5ConnectionPlieR;
2422 zsh = 4. * kRB26s5PlieR - 2. * kRB26s5PlieThickness;
2423 for (Int_t iw = 0; iw < kRB26s5NumberOfPlies; iw++) {
2424 Float_t zpos = z0 + iw * zsh;
2425 voRB26s5Bellow->AddNode(voRB26s5Wiggle, iw + 1, new TGeoTranslation(0., 0., zpos - kRB26s5PlieThickness));
2428 voRB26s5Compensator->AddNode(voRB26s5Bellow, 1, new TGeoTranslation(0., 0., 2. * kRB26s5WeldingTubeLeftL + kRB26s5BellowUndL/2.));
2431 // [Pos 2] Left Welding Tube
2433 TGeoPcon* shRB26s5CompLeftTube = new TGeoPcon(0., 360., 3);
2435 shRB26s5CompLeftTube->DefineSection(0, z0, kRB26s5CompTubeInnerR, kRB26s5CompTubeOuterR);
2436 z0 += 2 * kRB26s5WeldingTubeLeftL - ( kRB26s5ConnectionR - kRB26s5CompTubeOuterR);
2437 shRB26s5CompLeftTube->DefineSection(1, z0, kRB26s5CompTubeInnerR, kRB26s5CompTubeOuterR);
2438 z0 += ( kRB26s5ConnectionR - kRB26s5CompTubeOuterR);
2439 shRB26s5CompLeftTube->DefineSection(2, z0, kRB26s5ConnectionR - 0.15, kRB26s5ConnectionR);
2440 TGeoVolume* voRB26s5CompLeftTube = new TGeoVolume("RB26s5CompLeftTube", shRB26s5CompLeftTube, kMedSteel);
2441 voRB26s5Compensator->AddNode(voRB26s5CompLeftTube, 1, gGeoIdentity);
2443 // [Pos 3] Right Welding Tube
2445 TGeoPcon* shRB26s5CompRightTube = new TGeoPcon(0., 360., 11);
2447 shRB26s5CompRightTube->DefineSection( 0, 0. , kRB26s5CompTubeInnerR + 0.22, 11.2/2.);
2448 shRB26s5CompRightTube->DefineSection( 1, 0.05, kRB26s5CompTubeInnerR + 0.18, 11.2/2.);
2449 shRB26s5CompRightTube->DefineSection( 2, 0.22, kRB26s5CompTubeInnerR , 11.2/2. - 0.22);
2450 shRB26s5CompRightTube->DefineSection( 3, 0.44, kRB26s5CompTubeInnerR , 11.2/2.);
2451 shRB26s5CompRightTube->DefineSection( 4, 1.70, kRB26s5CompTubeInnerR , 11.2/2.);
2452 shRB26s5CompRightTube->DefineSection( 5, 2.10, kRB26s5CompTubeInnerR , kRB26s5CompTubeOuterR);
2453 shRB26s5CompRightTube->DefineSection( 6, 2.80, kRB26s5CompTubeInnerR , kRB26s5CompTubeOuterR);
2454 shRB26s5CompRightTube->DefineSection( 7, 2.80, kRB26s5CompTubeInnerR , 11.3/2.);
2455 shRB26s5CompRightTube->DefineSection( 8, 3.40, kRB26s5CompTubeInnerR , 11.3/2.);
2457 shRB26s5CompRightTube->DefineSection( 9, 3.50, kRB26s5CompTubeInnerR , kRB26s5CompTubeOuterR);
2458 shRB26s5CompRightTube->DefineSection(10, 2. * kRB26s5WeldingTubeRightL, kRB26s5CompTubeInnerR, kRB26s5CompTubeOuterR);
2460 TGeoVolume* voRB26s5CompRightTube =
2461 new TGeoVolume("RB26s5CompRightTube", shRB26s5CompRightTube, kMedSteel);
2462 voRB26s5Compensator->AddNode(voRB26s5CompRightTube, 1,
2463 new TGeoTranslation(0., 0., kRB26s5CompL - 2. * kRB26s5WeldingTubeRightL));
2467 TGeoTube* shRB26s5CompRing = new TGeoTube(kRB26s5RingInnerR, kRB26s5RingOuterR, kRB26s5RingL);
2468 TGeoVolume* voRB26s5CompRing =
2469 new TGeoVolume("RB26s5CompRing", shRB26s5CompRing, kMedSteel);
2470 voRB26s5Compensator->AddNode(voRB26s5CompRing, 1, new TGeoTranslation(0., 0., kRB26s5RingZ + kRB26s5RingL));
2473 // [Pos 5] Outer Protecting Tube
2475 TGeoTube* shRB26s5CompProtTube = new TGeoTube(kRB26s5RingOuterR, kRB26s5ProtOuterR, kRB26s5ProtL);
2476 TGeoVolume* voRB26s5CompProtTube =
2477 new TGeoVolume("RB26s5CompProtTube", shRB26s5CompProtTube, kMedSteel);
2478 voRB26s5Compensator->AddNode(voRB26s5CompProtTube, 1, new TGeoTranslation(0., 0., kRB26s5ProtZ + kRB26s5ProtL));
2480 ///////////////////////////////////////
2481 // RB26/4 Fixed Point Section //
2482 // Drawing LHCVC2a_0016 //
2483 ///////////////////////////////////////
2484 const Float_t kRB26s4TubeRi = 30.30/2. ; // Tube inner radius (0.3 cm added for welding)
2485 const Float_t kRB26s4TubeRo = 30.60/2. ; // Tube outer radius
2486 const Float_t kRB26s4FixedPointL = 12.63 ; // Length of the fixed point section
2487 const Float_t kRB26s4FixedPointZ = 10.53 ; // Position of the ring (0.15 added for welding)
2488 const Float_t kRB26s4FixedPointD = 0.595 ; // Width of the ring
2489 const Float_t kRB26s4FixedPointR = 31.60/2. ; // Radius of the ring
2491 TGeoPcon* shRB26s4FixedPoint = new TGeoPcon(0., 360., 6);
2493 shRB26s4FixedPoint->DefineSection(0, z0, kRB26s4TubeRi, kRB26s4TubeRo);
2494 z0 += kRB26s4FixedPointZ;
2495 shRB26s4FixedPoint->DefineSection(1, z0, kRB26s4TubeRi, kRB26s4TubeRo);
2496 shRB26s4FixedPoint->DefineSection(2, z0, kRB26s4TubeRi, kRB26s4FixedPointR);
2497 z0 += kRB26s4FixedPointD;
2498 shRB26s4FixedPoint->DefineSection(3, z0, kRB26s4TubeRi, kRB26s4FixedPointR);
2499 shRB26s4FixedPoint->DefineSection(4, z0, kRB26s4TubeRi, kRB26s4TubeRo);
2500 z0 = kRB26s4FixedPointL;
2501 shRB26s4FixedPoint->DefineSection(5, z0, kRB26s4TubeRi, kRB26s4TubeRo);
2502 TGeoVolume* voRB26s4FixedPoint = new TGeoVolume("RB26s4FixedPoint", shRB26s4FixedPoint, kMedSteel);
2504 TGeoVolume* voRB26s4FixedPointM = new TGeoVolume("RB26s4FixedPointM", MakeMotherFromTemplate(shRB26s4FixedPoint), kMedVac);
2505 voRB26s4FixedPointM->AddNode(voRB26s4FixedPoint, 1, gGeoIdentity);
2508 ///////////////////////////////////////
2509 // RB26/4 Split Flange //
2510 // Drawing LHCVFX__0005 //
2511 ///////////////////////////////////////
2512 const Float_t kRB26s4SFlangeL = 2.99; // Length of the flange
2513 const Float_t kRB26s4SFlangeD1 = 0.85; // Length of section 1
2514 const Float_t kRB26s4SFlangeD2 = 0.36; // Length of section 2
2515 const Float_t kRB26s4SFlangeD3 = 0.73 + 1.05; // Length of section 3
2516 const Float_t kRB26s4SFlangeRo = 36.20/2.; // Flange outer radius
2517 const Float_t kRB26s4SFlangeRi1 = 30.60/2.; // Flange inner radius section 1
2518 const Float_t kRB26s4SFlangeRi2 = 30.00/2.; // Flange inner radius section 2
2519 const Float_t kRB26s4SFlangeRi3 = 30.60/2.; // Flange inner radius section 3
2521 TGeoPcon* shRB26s4SFlange = new TGeoPcon(0., 360., 6);
2523 shRB26s4SFlange->DefineSection(0, z0, kRB26s4SFlangeRi1, kRB26s4SFlangeRo);
2524 z0 += kRB26s4SFlangeD1;
2525 shRB26s4SFlange->DefineSection(1, z0, kRB26s4SFlangeRi1, kRB26s4SFlangeRo);
2526 shRB26s4SFlange->DefineSection(2, z0, kRB26s4SFlangeRi2, kRB26s4SFlangeRo);
2527 z0 += kRB26s4SFlangeD2;
2528 shRB26s4SFlange->DefineSection(3, z0, kRB26s4SFlangeRi2, kRB26s4SFlangeRo);
2529 shRB26s4SFlange->DefineSection(4, z0, kRB26s4SFlangeRi3, kRB26s4SFlangeRo);
2530 z0 += kRB26s4SFlangeD3;
2531 shRB26s4SFlange->DefineSection(5, z0, kRB26s4SFlangeRi3, kRB26s4SFlangeRo);
2532 TGeoVolume* voRB26s4SFlange = new TGeoVolume("RB26s4SFlange", shRB26s4SFlange, kMedSteel);
2534 TGeoVolume* voRB26s4SFlangeM = new TGeoVolume("RB26s4SFlangeM", MakeMotherFromTemplate(shRB26s4SFlange, 0, 3), kMedVac);
2535 voRB26s4SFlangeM->AddNode(voRB26s4SFlange, 1, gGeoIdentity);
2537 ///////////////////////////////////////
2538 // RB26/5 Rotable Flange //
2539 // Drawing LHCVFX__0009 //
2540 ///////////////////////////////////////
2541 const Float_t kRB26s5RFlangeL = 1.86; // Length of the flange
2542 const Float_t kRB26s5RFlangeD1 = 0.61; // Length of section 1
2543 const Float_t kRB26s5RFlangeD2 = 0.15; // Length of section 2
2544 const Float_t kRB26s5RFlangeD3 = 0.60; // Length of section 3
2545 const Float_t kRB26s5RFlangeD4 = 0.50; // Length of section 4
2546 const Float_t kRB26s5RFlangeRo = 15.20/2.; // Flange outer radius
2547 const Float_t kRB26s5RFlangeRi1 = 10.30/2.; // Flange inner radius section 1
2548 const Float_t kRB26s5RFlangeRi2 = 10.00/2.; // Flange inner radius section 2
2549 const Float_t kRB26s5RFlangeRi3 = 10.30/2.; // Flange inner radius section 3
2550 const Float_t kRB26s5RFlangeRi4 = 10.50/2.; // Flange inner radius section 4
2553 TGeoPcon* shRB26s5RFlange = new TGeoPcon(0., 360., 8);
2555 shRB26s5RFlange->DefineSection(0, z0, kRB26s5RFlangeRi4, kRB26s5RFlangeRo);
2556 z0 += kRB26s5RFlangeD4;
2557 shRB26s5RFlange->DefineSection(1, z0, kRB26s5RFlangeRi4, kRB26s5RFlangeRo);
2558 shRB26s5RFlange->DefineSection(2, z0, kRB26s5RFlangeRi3, kRB26s5RFlangeRo);
2559 z0 += kRB26s5RFlangeD3;
2560 shRB26s5RFlange->DefineSection(3, z0, kRB26s5RFlangeRi3, kRB26s5RFlangeRo);
2561 shRB26s5RFlange->DefineSection(4, z0, kRB26s5RFlangeRi2, kRB26s5RFlangeRo);
2562 z0 += kRB26s5RFlangeD2;
2563 shRB26s5RFlange->DefineSection(5, z0, kRB26s5RFlangeRi2, kRB26s5RFlangeRo);
2564 shRB26s5RFlange->DefineSection(6, z0, kRB26s5RFlangeRi1, kRB26s5RFlangeRo);
2565 z0 += kRB26s5RFlangeD1;
2566 shRB26s5RFlange->DefineSection(7, z0, kRB26s5RFlangeRi1, kRB26s5RFlangeRo);
2567 TGeoVolume* voRB26s5RFlange = new TGeoVolume("RB26s5RFlange", shRB26s5RFlange, kMedSteel);
2569 TGeoVolume* voRB26s5RFlangeM = new TGeoVolume("RB26s5RFlangeM", MakeMotherFromTemplate(shRB26s5RFlange, 4, 7), kMedVac);
2570 voRB26s5RFlangeM->AddNode(voRB26s5RFlange, 1, gGeoIdentity);
2573 // Assemble RB26/1-2
2575 TGeoVolumeAssembly* asRB26s12 = new TGeoVolumeAssembly("RB26s12");
2577 asRB26s12->AddNode(voRB26s1RFlange, 1, gGeoIdentity);
2578 z0 += kRB26s1RFlangeIsL + kRB26s1RFlangeFpL;
2579 asRB26s12->AddNode(voRB26s12TubeM, 1, new TGeoTranslation(0., 0., z0));
2580 z0 += kRB26s12TubeL;
2581 asRB26s12->AddNode(voRB26s2Compensator, 1, new TGeoTranslation(0., 0., z0));
2583 z0 -= kRB26s2FFlangeD1;
2584 asRB26s12->AddNode(voRB26s2FFlangeM, 1, new TGeoTranslation(0., 0., z0));
2585 z0 += kRB26s2FFlangeL;
2586 const Float_t kRB26s12L = z0;
2591 TGeoVolumeAssembly* asRB26s3 = new TGeoVolumeAssembly("RB26s3");
2593 asRB26s3->AddNode(voRB26s3SFlangeM, 1, gGeoIdentity);
2594 z0 += kRB26s3SFlangeL;
2595 z0 -= kRB26s3SFlangeD3;
2596 asRB26s3->AddNode(voRB26s3FixedPointM, 1, new TGeoTranslation(0., 0., z0));
2597 z0 += kRB26s3FixedPointL;
2598 asRB26s3->AddNode(voRB26s3TubeM, 1, new TGeoTranslation(0., 0., z0));
2600 asRB26s3->AddNode(voRB26s3Compensator, 1, new TGeoTranslation(0., 0., z0));
2602 z0 -= kRB26s3FFlangeD1;
2603 asRB26s3->AddNode(voRB26s3FFlangeM, 1, new TGeoTranslation(0., 0., z0));
2604 z0 += kRB26s3FFlangeL;
2605 const Float_t kRB26s3L = z0;
2609 // Assemble RB26/4-5
2611 TGeoVolumeAssembly* asRB26s45 = new TGeoVolumeAssembly("RB26s45");
2613 asRB26s45->AddNode(voRB26s4SFlangeM, 1, gGeoIdentity);
2614 z0 += kRB26s4SFlangeL;
2615 z0 -= kRB26s4SFlangeD3;
2616 asRB26s45->AddNode(voRB26s4FixedPointM, 1, new TGeoTranslation(0., 0., z0));
2617 z0 += kRB26s4FixedPointL;
2618 asRB26s45->AddNode(voRB26s45TubeM, 1, new TGeoTranslation(0., 0., z0));
2619 z0 += kRB26s45TubeL;
2620 asRB26s45->AddNode(voRB26s5Compensator, 1, new TGeoTranslation(0., 0., z0));
2622 z0 -= kRB26s5RFlangeD3;
2623 z0 -= kRB26s5RFlangeD4;
2624 asRB26s45->AddNode(voRB26s5RFlangeM, 1, new TGeoTranslation(0., 0., z0));
2625 z0 += kRB26s5RFlangeL;
2626 const Float_t kRB26s45L = z0;
2631 TGeoVolumeAssembly* asRB26Pipe = new TGeoVolumeAssembly("RB26Pipe");
2633 asRB26Pipe->AddNode(asRB26s12, 1, new TGeoTranslation(0., 0., z0));
2635 asRB26Pipe->AddNode(asRB26s3, 1, new TGeoTranslation(0., 0., z0));
2637 asRB26Pipe->AddNode(asRB26s45, 1, new TGeoTranslation(0., 0., z0));
2639 top->AddNode(asRB26Pipe, 1, new TGeoCombiTrans(0., 0., -82., rot180));
2644 //___________________________________________
2645 void AliPIPEupgrade::CreateMaterials()
2648 // Define materials for beam pipe
2651 AliDebugClass(1,"Create PIPEupgrade materials");
2652 Int_t isxfld = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ();
2653 Float_t sxmgmx = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max();
2655 Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 };
2656 Float_t zsteel[4] = { 26.,24.,28.,14. };
2657 Float_t wsteel[4] = { .715,.18,.1,.005 };
2659 Float_t aAlBe[2] = { 26.98, 9.01};
2660 Float_t zAlBe[2] = { 13.00, 4.00};
2661 Float_t wAlBe[2] = { 0.4, 0.6};
2664 Float_t aPA[4] = {16., 14., 12., 1.};
2665 Float_t zPA[4] = { 8., 7., 6., 1.};
2666 Float_t wPA[4] = { 1., 1., 6., 11.};
2670 Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
2671 Float_t zAir[4]={6.,7.,8.,18.};
2672 Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
2673 Float_t dAir = 1.20479E-3;
2674 Float_t dAir1 = 1.20479E-11;
2676 // Insulation powder
2678 Float_t ains[4] ={28.0855, 15.9994, 47.867, 26.982};
2679 Float_t zins[4] ={14., 8. , 22. , 13. };
2680 Float_t wins[4] ={ 0.3019, 0.4887, 0.1914, 0.018};
2687 Float_t aaco[3] ={26.982, 28.0855, 24.035};
2688 Float_t zaco[3] ={13., 14. , 12. };
2689 Float_t waco[3] ={ 0.924, 0.07, 0.006};
2692 Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
2693 Float_t zKapton[4]={1.,6.,7.,8.};
2694 Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
2695 Float_t dKapton = 1.42;
2698 Float_t aNEG[4] = {47.87, 50.94, 91.24};
2699 Float_t zNEG[4] = {22.00, 23.00, 40.00};
2700 Float_t wNEG[4] = {1./3., 1./3., 1./3.};
2701 Float_t dNEG = 5.6; // ?
2706 AliMaterial(5, "BERILLIUM$", 9.01, 4., 1.848, 35.3, 36.7);
2709 AliMaterial(6, "CARBON$ ", 12.01, 6., 2.265, 18.8, 49.9);
2712 AliMaterial(9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
2715 AliMaterial(10, "COPPER", 63.55, 29, 8.96, 1.43, 85.6/8.96);
2718 AliMixture(15, "AIR$ ", aAir, zAir, dAir, 4, wAir);
2719 AliMixture(35, "AIR_HIGH$ ", aAir, zAir, dAir, 4, wAir);
2722 AliMixture(16, "VACUUM$ " , aAir, zAir, dAir1, 4, wAir);
2723 AliMixture(17, "VACUUMM$ ", aAir, zAir, dAir1, 4, wAir);
2726 AliMixture(19, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel);
2728 // reduced density steel to approximate pump getter material
2729 AliMixture(20, "GETTER$", asteel, zsteel, 1.00, 4, wsteel);
2732 AliMixture(21, "AlBe$", aAlBe, zAlBe, 2.07, 2, wAlBe);
2735 AliMixture(22, "PA$", aPA, zPA, 1.14, -4, wPA);
2738 AliMixture(23, "KAPTON", aKapton, zKapton, dKapton, 4, wKapton);
2740 AliMixture(24, "ANTICORODAL", aaco, zaco, 2.66, 3, waco);
2743 // Insulation powder
2744 AliMixture(14, "INSULATION0$", ains, zins, 0.41, 4, wins);
2745 AliMixture(34, "INSULATION1$", ains, zins, 0.41, 4, wins);
2746 AliMixture(54, "INSULATION2$", ains, zins, 0.41, 4, wins);
2749 AliMixture(25, "NEG COATING", aNEG, zNEG, dNEG, -3, wNEG);
2753 // Defines tracking media parameters.
2755 Float_t epsil = .001; // Tracking precision,
2756 Float_t stemax = -0.01; // Maximum displacement for multiple scat
2757 Float_t tmaxfd = -20.; // Maximum angle due to field deflection
2758 Float_t deemax = -.3; // Maximum fractional energy loss, DLS
2759 Float_t stmin = -.8;
2764 AliMedium(5, "BE", 5, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2767 AliMedium(6, "C", 6, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2770 AliMedium(9, "ALU", 9, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2772 AliMedium(10, "CU", 10, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2775 AliMedium(15, "AIR", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2776 AliMedium(35, "AIR_HIGH",35, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2779 AliMedium(16, "VACUUM", 16, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2780 AliMedium(17, "VACUUMM", 17, 0, isxfld, sxmgmx, 0.1, stemax, deemax, epsil, stmin);
2783 AliMedium(19, "INOX", 19, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2786 AliMedium(20, "GETTER", 20, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2789 AliMedium(21, "AlBe" , 21, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2792 AliMedium(22, "PA" , 22, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2794 AliMedium(24, "ANTICORODAL", 24, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2795 // Insulation Powder
2796 AliMedium(14, "INS_C0 ", 14, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2797 AliMedium(34, "INS_C1 ", 34, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2798 AliMedium(54, "INS_C2 ", 54, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2801 AliMedium(23, "KAPTON", 23, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2805 AliMedium(25, "NEG COATING", 25, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin);
2809 TGeoPcon* AliPIPEupgrade::MakeMotherFromTemplate(const TGeoPcon* shape, Int_t imin, Int_t imax, Float_t r0, Int_t nz)
2812 // Create a mother shape from a template setting some min radii to 0
2814 Int_t nz0 = shape->GetNz();
2815 // if nz > -1 the number of planes is given by nz
2816 if (nz != -1) nz0 = nz;
2817 TGeoPcon* mother = new TGeoPcon(0., 360., nz0);
2819 if (imin == -1 || imax == -1) {
2821 imax = shape->GetNz();
2822 } else if (imax >= nz0) {
2824 printf("Warning: imax reset to nz-1 %5d %5d %5d %5d\n", imin, imax, nz, nz0);
2829 for (Int_t i = 0; i < shape->GetNz(); i++) {
2830 Double_t rmin = shape->GetRmin(i);
2831 if ((i >= imin) && (i <= imax) ) rmin = r0;
2832 Double_t rmax = shape->GetRmax(i);
2833 Double_t z = shape->GetZ(i);
2834 mother->DefineSection(i, z, rmin, rmax);
2840 TGeoPcon* AliPIPEupgrade::MakeInsulationFromTemplate(TGeoPcon* shape)
2843 // Create an beam pipe insulation layer shape from a template
2845 Int_t nz = shape->GetNz();
2846 TGeoPcon* insu = new TGeoPcon(0., 360., nz);
2848 for (Int_t i = 0; i < nz; i++) {
2849 Double_t z = shape->GetZ(i);
2850 Double_t rmin = shape->GetRmin(i);
2851 Double_t rmax = shape->GetRmax(i);
2853 shape->DefineSection(i, z, rmin, rmax);
2855 insu->DefineSection(i, z, rmin, rmax);
2862 TGeoVolume* AliPIPEupgrade::MakeBellow(const char* ext, Int_t nc, Float_t rMin, Float_t rMax, Float_t dU, Float_t rPlie, Float_t dPlie)
2864 // nc Number of convolution
2865 // rMin Inner radius of the bellow
2866 // rMax Outer radius of the bellow
2867 // dU Undulation length
2868 // rPlie Plie radius
2869 // dPlie Plie thickness
2870 const TGeoMedium* kMedVac = gGeoManager->GetMedium("PIPE_VACUUM");
2871 const TGeoMedium* kMedSteel = gGeoManager->GetMedium("PIPE_INOX");
2873 char name[64], nameA[64], nameB[64], bools[64];
2874 snprintf(name, 64, "%sBellowUS", ext);
2875 TGeoVolume* voBellow = new TGeoVolume(name, new TGeoTube(rMin, rMax, dU/2.), kMedVac);
2877 // Upper part of the undulation
2879 TGeoTorus* shPlieTorusU = new TGeoTorus(rMax - rPlie, rPlie - dPlie, rPlie);
2880 snprintf(nameA, 64, "%sTorusU", ext);
2881 shPlieTorusU->SetName(nameA);
2882 TGeoTube* shPlieTubeU = new TGeoTube (rMax - rPlie, rMax, rPlie);
2883 snprintf(nameB, 64, "%sTubeU", ext);
2884 shPlieTubeU->SetName(nameB);
2885 snprintf(name, 64, "%sUpperPlie", ext);
2886 snprintf(bools, 64, "%s*%s", nameA, nameB);
2887 TGeoCompositeShape* shUpperPlie = new TGeoCompositeShape(name, bools);
2889 TGeoVolume* voWiggleU = new TGeoVolume(name, shUpperPlie, kMedSteel);
2891 // Lower part of the undulation
2892 TGeoTorus* shPlieTorusL = new TGeoTorus(rMin + rPlie, rPlie - dPlie, rPlie);
2893 snprintf(nameA, 64, "%sTorusL", ext);
2894 shPlieTorusL->SetName(nameA);
2895 TGeoTube* shPlieTubeL = new TGeoTube (rMin, rMin + rPlie, rPlie);
2896 snprintf(nameB, 64, "%sTubeL", ext);
2897 shPlieTubeL->SetName(nameB);
2898 snprintf(name, 64, "%sLowerPlie", ext);
2899 snprintf(bools, 64, "%s*%s", nameA, nameB);
2900 TGeoCompositeShape* shLowerPlie = new TGeoCompositeShape(name, bools);
2902 TGeoVolume* voWiggleL = new TGeoVolume(name, shLowerPlie, kMedSteel);
2905 // Connection between upper and lower part of undulation
2906 snprintf(name, 64, "%sPlieConn1", ext);
2907 TGeoVolume* voWiggleC1 = new TGeoVolume(name, new TGeoTube(rMin + rPlie, rMax - rPlie, dPlie/2.), kMedSteel);
2910 Float_t dz = rPlie - dPlie / 2.;
2911 Float_t z0 = - dPlie / 2.;
2912 snprintf(name, 64, "%sWiggle", ext);
2913 TGeoVolumeAssembly* asWiggle = new TGeoVolumeAssembly(name);
2914 asWiggle->AddNode(voWiggleC1, 1 , new TGeoTranslation(0., 0., z0));
2916 asWiggle->AddNode(voWiggleU, 1 , new TGeoTranslation(0., 0., z0));
2918 asWiggle->AddNode(voWiggleC1, 2 , new TGeoTranslation(0., 0., z0));
2920 asWiggle->AddNode(voWiggleL , 1 , new TGeoTranslation(0., 0., z0));
2921 // Positioning of the volumes
2922 z0 = - dU / 2.+ rPlie;
2923 voBellow->AddNode(voWiggleL, 2, new TGeoTranslation(0., 0., z0));
2925 Float_t zsh = 4. * rPlie - 2. * dPlie;
2926 for (Int_t iw = 0; iw < nc; iw++) {
2927 Float_t zpos = z0 + iw * zsh;
2928 voBellow->AddNode(asWiggle, iw + 1, new TGeoTranslation(0., 0., zpos - dPlie));
2933 //_______________________________________________________________________
2934 void AliPIPEupgrade::AddAlignableVolumes() const
2937 AliInfo("Add PIPE alignable volume");
2940 AliFatal("TGeoManager doesn't exist !");
2944 TString symname("CP1");
2945 TString volpath("/ALIC_1/CP_1/Cp1_1");
2946 if(!gGeoManager->SetAlignableEntry(symname.Data(),volpath.Data()))
2947 AliFatal(Form("Alignable entry %s not created. Volume path %s not valid",
2948 symname.Data(),volpath.Data()));
2950 //TString symname2("CP3");
2951 //TString volpath2("/ALIC_1/CP_1/Cp3_1");
2952 //if(!gGeoManager->SetAlignableEntry(symname2.Data(),volpath2.Data()))
2953 // AliFatal(Form("Alignable entry %s not created. Volume path %s not valid",
2954 // symname2.Data(),volpath2.Data()));