1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
17 $Log: AliT0Preprocessor.cxx,v $
18 Revision 1.8 2007/12/07 15:22:51 alla
21 Revision 1.7 2007/12/06 16:35:24 alla
22 new bugs fixed by Tomek
24 Revision 1.5 2007/11/23 19:28:52 alla
27 Version 2.1 2007/11/21
28 Preprocessor storing data to OCDB (T.Malkiewicz)
31 Preliminary test version (T.Malkiewicz)
34 // 1) takes data from DCS and passes it to the class AliTOFDataDCS
35 // for processing and writes the result to the Reference DB.
36 // 2) takes data form DAQ (both from Laser Calibration and Physics runs),
37 // processes it, and stores either to OCDB or to Reference DB.
40 #include "AliT0Preprocessor.h"
41 #include "AliT0DataDCS.h"
42 #include "AliT0CalibWalk.h"
43 #include "AliT0CalibTimeEq.h"
45 #include "AliCDBMetaData.h"
46 #include "AliDCSValue.h"
47 #include "AliCDBEntry.h"
50 #include <TTimeStamp.h>
52 #include <TObjString.h>
54 #include "AliT0Dqclass.h"
58 ClassImp(AliT0Preprocessor)
60 //____________________________________________________
61 AliT0Preprocessor::AliT0Preprocessor(AliShuttleInterface* shuttle) :
62 AliPreprocessor("T00", shuttle),
66 AddRunType("PHYSICS");
67 AddRunType("STANDALONE");
68 AddRunType("AMPLITUDE_CALIBRATION");
70 //____________________________________________________
72 AliT0Preprocessor::~AliT0Preprocessor()
78 //____________________________________________________
80 void AliT0Preprocessor::Initialize(Int_t run, UInt_t startTime, UInt_t endTime)
82 // Creates AliT0DataDCS object
83 AliPreprocessor::Initialize(run, startTime, endTime);
84 AliInfo(Form("\n\tRun %d \n\tStartTime %s \n\tEndTime %s", run, TTimeStamp(startTime).AsString(), TTimeStamp(endTime).AsString()));
85 fData = new AliT0DataDCS(fRun, fStartTime, fEndTime, GetStartTimeDCSQuery(), GetEndTimeDCSQuery());
87 //____________________________________________________
89 Bool_t AliT0Preprocessor::ProcessDCS(){
90 // Check whether DCS should be processed or not...
91 TString runType = GetRunType();
92 Log(Form("ProcessDCS - RunType: %s",runType.Data()));
94 if((runType == "STANDALONE")||
95 (runType == "PHYSICS")
96 || (runType == "AMPLITUDE_CALIBRATION")){
104 //____________________________________________________
106 UInt_t AliT0Preprocessor::ProcessDCSDataPoints(TMap* dcsAliasMap){
107 // Fills data into AliT0DataDCS object
108 Log("Processing DCS DP");
109 Bool_t resultDCSMap=kFALSE;
110 Bool_t resultDCSStore=kFALSE;
114 Log("No DCS input data");
119 resultDCSMap=fData->ProcessData(*dcsAliasMap);
122 Log("Error when processing DCS data");
123 return 2;// return error Code for processed DCS data not stored
127 AliCDBMetaData metaDataDCS;
128 metaDataDCS.SetBeamPeriod(0);
129 metaDataDCS.SetResponsible("Tomasz Malkiewicz");
130 metaDataDCS.SetComment("This preprocessor fills an AliTODataDCS object.");
131 AliInfo("Storing DCS Data");
132 resultDCSStore = StoreReferenceData("Calib","DCSData",fData, &metaDataDCS);
135 Log("Some problems occurred while storing DCS data results in ReferenceDB");
136 return 2;// return error Code for processed DCS data not stored
142 //____________________________________________________
144 UInt_t AliT0Preprocessor::ProcessLaser()
146 // Processing data from DAQ Standalone run
147 Log("Processing Laser calibration - Walk Correction");
148 Bool_t resultLaser = kFALSE;
149 Bool_t writeok = kFALSE;
151 TList* list = GetFileSources(kDAQ, "AMPLITUDE_CALIBRATION");
152 AliT0CalibWalk *laser = new AliT0CalibWalk();
157 while ((source = dynamic_cast<TObjString *> (iter.Next())))
159 const char *laserFile = GetFile(kDAQ, "AMPLITUDE_CALIBRATION", source->GetName());
162 Log(Form("File with Id AMPLITUDE_CALIBRAION found in source %s!", source->GetName()));
163 writeok = laser->MakeWalkCorrGraph(laserFile);
168 AliCDBMetaData metaData;
169 metaData.SetBeamPeriod(0);
170 metaData.SetResponsible("Tomek&Michal");
171 metaData.SetComment("Walk correction from laser runs.");
172 if (writeok) resultLaser=Store("Calib","Slewing_Walk", laser, &metaData, 0, 1);
175 Log(Form("writeok = %d no peaks in CFD spectra",writeok));
178 Log(Form("resultLaser = %d",resultLaser));
181 Log("No Laser Data stored");
182 return 3;//return error code for failure in storing Laser Data
187 Log(Form("Could not find file with Id AMPLITUDE_CALIBRAION "));
194 //____________________________________________________
196 UInt_t AliT0Preprocessor::ProcessPhysics(){
197 //Processing data from DAQ Physics run
198 Log("Processing Physics");
200 Bool_t resultOnline=kFALSE;
202 TList* listPhys = GetFileSources(kDAQ, "PHYSICS");
205 TIter iter(listPhys);
206 TObjString *sourcePhys;
207 while ((sourcePhys = dynamic_cast<TObjString *> (iter.Next())))
209 const char *filePhys = GetFile(kDAQ, "PHYSICS", sourcePhys->GetName());
212 AliT0CalibTimeEq *online = new AliT0CalibTimeEq();
214 Bool_t writeok = online->ComputeOnlineParams(filePhys);
215 AliCDBMetaData metaData;
216 metaData.SetBeamPeriod(0);
217 metaData.SetResponsible("Alla Maevskaya");
218 metaData.SetComment("Time equalizing result.");
220 if (writeok) resultOnline = Store("Calib","TimeDelay", online, &metaData, 0, 1);
223 Log(Form("writeok = %d not enough data for equalizing",resultOnline));
226 Log(Form("resultOnline = %d",resultOnline));
231 Log(Form("Could not find file with Id PHYSICS in source %s!", sourcePhys->GetName()));
238 Log("No Data stored");
239 return 4;//return error code for failure in storing OCDB Data
242 Log("No sources found for id PHYSICS!");
247 //____________________________________________________
249 UInt_t AliT0Preprocessor::Process(TMap* dcsAliasMap )
251 // T0 preprocessor return codes:
253 // return=1 : no DCS input data
254 // return=2 : failed to store DCS data
255 // return=3 : no Laser data (Walk correction)
256 // return=4 : failed to store OCDB time equalized data
257 // return=5 : no DAQ input for OCDB
258 // return=6 : failed to retrieve DAQ data from OCDB
259 // return=7 : failed to store T0 OCDB data
260 // return=8 : not enough data for equalizing
261 Bool_t dcsDP = ProcessDCS();
262 Log(Form("dcsDP = %d",dcsDP));
263 TString runType = GetRunType();
264 Log(Form("RunType: %s",runType.Data()));
266 if(runType == "STANDALONE"){
268 Int_t iresultDCS = ProcessDCSDataPoints(dcsAliasMap);
273 if(runType == "AMPLITUDE_CALIBRATION"){
274 Int_t iresultLaser = ProcessLaser();
276 Int_t iresultDCS = ProcessDCSDataPoints(dcsAliasMap);
280 Log(Form("iresultLaser = %d",iresultLaser));
284 else if(runType == "PHYSICS"){
285 Int_t iresultPhysics = ProcessPhysics();
287 Int_t iresultDCS = ProcessDCSDataPoints(dcsAliasMap);
290 Log(Form("iresultPhysics = %d",iresultPhysics));
291 return iresultPhysics;