1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
18 #include <Riostream.h>
20 #include "TClonesArray.h"
22 #include "TCallf77.h" //For the fortran calls
23 #include "Fdblprc.h" //(DBLPRC) fluka common
24 #include "Fepisor.h" //(EPISOR) fluka common
25 #include "Ffinuc.h" //(FINUC) fluka common
26 #include "Fiounit.h" //(IOUNIT) fluka common
27 #include "Fpaprop.h" //(PAPROP) fluka common
28 #include "Fpart.h" //(PART) fluka common
29 #include "Ftrackr.h" //(TRACKR) fluka common
30 #include "Fpaprop.h" //(PAPROP) fluka common
31 #include "Ffheavy.h" //(FHEAVY) fluka common
33 #include "TVirtualMC.h"
34 #include "TG4GeometryManager.h" //For the geometry management
35 #include "TG4DetConstruction.h" //For the detector construction
37 #include "FGeometryInit.hh"
38 #include "TLorentzVector.h"
39 #include "FlukaVolume.h"
41 // Fluka methods that may be needed.
43 # define flukam flukam_
44 # define fluka_openinp fluka_openinp_
45 # define fluka_closeinp fluka_closeinp_
46 # define mcihad mcihad_
47 # define mpdgha mpdgha_
49 # define flukam FLUKAM
50 # define fluka_openinp FLUKA_OPENINP
51 # define fluka_closeinp FLUKA_CLOSEINP
52 # define mcihad MCIHAD
53 # define mpdgha MPDGHA
59 // Prototypes for FLUKA functions
61 void type_of_call flukam(const int&);
62 void type_of_call fluka_openinp(const int&, DEFCHARA);
63 void type_of_call fluka_closeinp(const int&);
64 int type_of_call mcihad(const int&);
65 int type_of_call mpdgha(const int&);
69 // Class implementation for ROOT
74 //----------------------------------------------------------------------------
75 // TFluka constructors and destructors.
76 //____________________________________________________________________________
82 fCurrentFlukaRegion(-1)
85 // Default constructor
89 TFluka::TFluka(const char *title, Int_t verbosity)
90 :TVirtualMC("TFluka",title),
91 fVerbosityLevel(verbosity),
96 fCurrentFlukaRegion(-1)
98 if (fVerbosityLevel >=3)
99 cout << "==> TFluka::TFluka(" << title << ") constructor called." << endl;
102 // create geometry manager
103 if (fVerbosityLevel >=2)
104 cout << "\t* Creating G4 Geometry manager..." << endl;
105 fGeometryManager = new TG4GeometryManager();
106 if (fVerbosityLevel >=2)
107 cout << "\t* Creating G4 Detector..." << endl;
108 fDetector = new TG4DetConstruction();
109 FGeometryInit* geominit = FGeometryInit::GetInstance();
111 geominit->setDetConstruction(fDetector);
113 cerr << "ERROR: Could not create FGeometryInit!" << endl;
114 cerr << " Exiting!!!" << endl;
118 if (fVerbosityLevel >=3)
119 cout << "<== TFluka::TFluka(" << title << ") constructor called." << endl;
121 fVolumeMediaMap = new TClonesArray("FlukaVolume",1000);
127 if (fVerbosityLevel >=3)
128 cout << "==> TFluka::~TFluka() destructor called." << endl;
130 delete fGeometryManager;
131 fVolumeMediaMap->Delete();
132 delete fVolumeMediaMap;
135 if (fVerbosityLevel >=3)
136 cout << "<== TFluka::~TFluka() destructor called." << endl;
140 //_____________________________________________________________________________
141 // TFluka control methods
142 //____________________________________________________________________________
143 void TFluka::Init() {
145 if (fVerbosityLevel >=3)
146 cout << "==> TFluka::Init() called." << endl;
148 cout << "\t* InitPhysics() - Prepare input file to be called" << endl;
149 InitPhysics(); // prepare input file
150 cout << "\t* InitPhysics() - Prepare input file called" << endl;
152 if (fVerbosityLevel >=2)
153 cout << "\t* Changing lfdrtr = (" << (GLOBAL.lfdrtr?'T':'F')
154 << ") in fluka..." << endl;
155 GLOBAL.lfdrtr = true;
157 if (fVerbosityLevel >=2)
158 cout << "\t* Opening file " << sInputFileName << endl;
159 const char* fname = sInputFileName;
160 fluka_openinp(lunin, PASSCHARA(fname));
162 if (fVerbosityLevel >=2)
163 cout << "\t* Calling flukam..." << endl;
166 if (fVerbosityLevel >=2)
167 cout << "\t* Closing file " << sInputFileName << endl;
168 fluka_closeinp(lunin);
172 if (fVerbosityLevel >=3)
173 cout << "<== TFluka::Init() called." << endl;
177 void TFluka::FinishGeometry() {
179 // Build-up table with region to medium correspondance
183 if (fVerbosityLevel >=3)
184 cout << "==> TFluka::FinishGeometry() called." << endl;
186 // fGeometryManager->Ggclos();
188 FGeometryInit* flugg = FGeometryInit::GetInstance();
190 fMediaByRegion = new Int_t[fNVolumes+2];
191 for (Int_t i = 0; i < fNVolumes; i++)
193 FlukaVolume* vol = dynamic_cast<FlukaVolume*>((*fVolumeMediaMap)[i]);
194 TString volName = vol->GetName();
195 Int_t media = vol->GetMedium();
196 if (fVerbosityLevel >= 3)
197 printf("Finish Geometry: volName, media %d %s %d \n", i, volName.Data(), media);
198 strcpy(tmp, volName.Data());
200 flugg->SetMediumFromName(tmp, media, i+1);
201 fMediaByRegion[i] = media;
204 flugg->BuildMediaMap();
206 if (fVerbosityLevel >=3)
207 cout << "<== TFluka::FinishGeometry() called." << endl;
210 void TFluka::BuildPhysics() {
211 if (fVerbosityLevel >=3)
212 cout << "==> TFluka::BuildPhysics() called." << endl;
215 if (fVerbosityLevel >=3)
216 cout << "<== TFluka::BuildPhysics() called." << endl;
219 void TFluka::ProcessEvent() {
220 if (fVerbosityLevel >=3)
221 cout << "==> TFluka::ProcessEvent() called." << endl;
222 fApplication->GeneratePrimaries();
223 EPISOR.lsouit = true;
225 if (fVerbosityLevel >=3)
226 cout << "<== TFluka::ProcessEvent() called." << endl;
230 void TFluka::ProcessRun(Int_t nevent) {
231 if (fVerbosityLevel >=3)
232 cout << "==> TFluka::ProcessRun(" << nevent << ") called."
235 if (fVerbosityLevel >=2) {
236 cout << "\t* GLOBAL.fdrtr = " << (GLOBAL.lfdrtr?'T':'F') << endl;
237 cout << "\t* Calling flukam again..." << endl;
239 fApplication->InitGeometry();
240 fApplication->BeginEvent();
242 fApplication->FinishEvent();
243 if (fVerbosityLevel >=3)
244 cout << "<== TFluka::ProcessRun(" << nevent << ") called."
249 //_____________________________________________________________________________
250 // methods for building/management of geometry
251 //____________________________________________________________________________
252 // functions from GCONS
253 void TFluka::Gfmate(Int_t imat, char *name, Float_t &a, Float_t &z,
254 Float_t &dens, Float_t &radl, Float_t &absl,
255 Float_t* ubuf, Int_t& nbuf) {
257 fGeometryManager->Gfmate(imat, name, a, z, dens, radl, absl, ubuf, nbuf);
260 void TFluka::Gfmate(Int_t imat, char *name, Double_t &a, Double_t &z,
261 Double_t &dens, Double_t &radl, Double_t &absl,
262 Double_t* ubuf, Int_t& nbuf) {
264 fGeometryManager->Gfmate(imat, name, a, z, dens, radl, absl, ubuf, nbuf);
267 // detector composition
268 void TFluka::Material(Int_t& kmat, const char* name, Double_t a,
269 Double_t z, Double_t dens, Double_t radl, Double_t absl,
270 Float_t* buf, Int_t nwbuf) {
273 ->Material(kmat, name, a, z, dens, radl, absl, buf, nwbuf);
275 void TFluka::Material(Int_t& kmat, const char* name, Double_t a,
276 Double_t z, Double_t dens, Double_t radl, Double_t absl,
277 Double_t* buf, Int_t nwbuf) {
280 ->Material(kmat, name, a, z, dens, radl, absl, buf, nwbuf);
283 void TFluka::Mixture(Int_t& kmat, const char *name, Float_t *a,
284 Float_t *z, Double_t dens, Int_t nlmat, Float_t *wmat) {
287 ->Mixture(kmat, name, a, z, dens, nlmat, wmat);
289 void TFluka::Mixture(Int_t& kmat, const char *name, Double_t *a,
290 Double_t *z, Double_t dens, Int_t nlmat, Double_t *wmat) {
293 ->Mixture(kmat, name, a, z, dens, nlmat, wmat);
296 void TFluka::Medium(Int_t& kmed, const char *name, Int_t nmat,
297 Int_t isvol, Int_t ifield, Double_t fieldm, Double_t tmaxfd,
298 Double_t stemax, Double_t deemax, Double_t epsil,
299 Double_t stmin, Float_t* ubuf, Int_t nbuf) {
302 ->Medium(kmed, name, nmat, isvol, ifield, fieldm, tmaxfd, stemax, deemax,
303 epsil, stmin, ubuf, nbuf);
305 void TFluka::Medium(Int_t& kmed, const char *name, Int_t nmat,
306 Int_t isvol, Int_t ifield, Double_t fieldm, Double_t tmaxfd,
307 Double_t stemax, Double_t deemax, Double_t epsil,
308 Double_t stmin, Double_t* ubuf, Int_t nbuf) {
311 ->Medium(kmed, name, nmat, isvol, ifield, fieldm, tmaxfd, stemax, deemax,
312 epsil, stmin, ubuf, nbuf);
315 void TFluka::Matrix(Int_t& krot, Double_t thetaX, Double_t phiX,
316 Double_t thetaY, Double_t phiY, Double_t thetaZ,
320 ->Matrix(krot, thetaX, phiX, thetaY, phiY, thetaZ, phiZ);
323 void TFluka::Gstpar(Int_t itmed, const char *param, Double_t parval) {
325 fGeometryManager->Gstpar(itmed, param, parval);
328 // functions from GGEOM
329 Int_t TFluka::Gsvolu(const char *name, const char *shape, Int_t nmed,
330 Float_t *upar, Int_t np) {
332 // fVolumeMediaMap[TString(name)] = nmed;
333 if (fVerbosityLevel >= 3)
334 printf("TFluka::Gsvolu() name = %s, nmed = %d\n", name, nmed);
336 TClonesArray &lvols = *fVolumeMediaMap;
337 new(lvols[fNVolumes++])
338 FlukaVolume(name, nmed);
339 return fGeometryManager->Gsvolu(name, shape, nmed, upar, np);
341 Int_t TFluka::Gsvolu(const char *name, const char *shape, Int_t nmed,
342 Double_t *upar, Int_t np) {
344 TClonesArray &lvols = *fVolumeMediaMap;
345 new(lvols[fNVolumes++])
346 FlukaVolume(name, nmed);
348 return fGeometryManager->Gsvolu(name, shape, nmed, upar, np);
351 void TFluka::Gsdvn(const char *name, const char *mother, Int_t ndiv,
354 // The medium of the daughter is the one of the mother
355 Int_t volid = TFluka::VolId(mother);
356 Int_t med = TFluka::VolId2Mate(volid);
357 TClonesArray &lvols = *fVolumeMediaMap;
358 new(lvols[fNVolumes++])
359 FlukaVolume(name, med);
360 fGeometryManager->Gsdvn(name, mother, ndiv, iaxis);
363 void TFluka::Gsdvn2(const char *name, const char *mother, Int_t ndiv,
364 Int_t iaxis, Double_t c0i, Int_t numed) {
366 TClonesArray &lvols = *fVolumeMediaMap;
367 new(lvols[fNVolumes++])
368 FlukaVolume(name, numed);
369 fGeometryManager->Gsdvn2(name, mother, ndiv, iaxis, c0i, numed);
372 void TFluka::Gsdvt(const char *name, const char *mother, Double_t step,
373 Int_t iaxis, Int_t numed, Int_t ndvmx) {
375 TClonesArray &lvols = *fVolumeMediaMap;
376 new(lvols[fNVolumes++])
377 FlukaVolume(name, numed);
378 fGeometryManager->Gsdvt(name, mother, step, iaxis, numed, ndvmx);
381 void TFluka::Gsdvt2(const char *name, const char *mother, Double_t step,
382 Int_t iaxis, Double_t c0, Int_t numed, Int_t ndvmx) {
384 TClonesArray &lvols = *fVolumeMediaMap;
385 new(lvols[fNVolumes++])
386 FlukaVolume(name, numed);
387 fGeometryManager->Gsdvt2(name, mother, step, iaxis, c0, numed, ndvmx);
390 void TFluka::Gsord(const char *name, Int_t iax) {
392 fGeometryManager->Gsord(name, iax);
395 void TFluka::Gspos(const char *name, Int_t nr, const char *mother,
396 Double_t x, Double_t y, Double_t z, Int_t irot,
399 fGeometryManager->Gspos(name, nr, mother, x, y, z, irot, konly);
402 void TFluka::Gsposp(const char *name, Int_t nr, const char *mother,
403 Double_t x, Double_t y, Double_t z, Int_t irot,
404 const char *konly, Float_t *upar, Int_t np) {
406 fGeometryManager->Gsposp(name, nr, mother, x, y, z, irot, konly, upar, np);
408 void TFluka::Gsposp(const char *name, Int_t nr, const char *mother,
409 Double_t x, Double_t y, Double_t z, Int_t irot,
410 const char *konly, Double_t *upar, Int_t np) {
412 fGeometryManager->Gsposp(name, nr, mother, x, y, z, irot, konly, upar, np);
415 void TFluka::Gsbool(const char* onlyVolName, const char* manyVolName) {
417 fGeometryManager->Gsbool(onlyVolName, manyVolName);
420 void TFluka::SetCerenkov(Int_t itmed, Int_t npckov, Float_t *ppckov,
421 Float_t *absco, Float_t *effic, Float_t *rindex) {
423 fGeometryManager->SetCerenkov(itmed, npckov, ppckov, absco, effic, rindex);
425 void TFluka::SetCerenkov(Int_t itmed, Int_t npckov, Double_t *ppckov,
426 Double_t *absco, Double_t *effic, Double_t *rindex) {
428 fGeometryManager->SetCerenkov(itmed, npckov, ppckov, absco, effic, rindex);
432 void TFluka::WriteEuclid(const char* fileName, const char* topVol,
433 Int_t number, Int_t nlevel) {
435 fGeometryManager->WriteEuclid(fileName, topVol, number, nlevel);
440 //_____________________________________________________________________________
441 // methods needed by the stepping
442 //____________________________________________________________________________
444 Int_t TFluka::GetMedium() const {
446 // Get the medium number for the current fluka region
448 FGeometryInit* flugg = FGeometryInit::GetInstance();
449 return flugg->GetMedium(fCurrentFlukaRegion);
454 //____________________________________________________________________________
455 // particle table usage
456 // ID <--> PDG transformations
457 //_____________________________________________________________________________
458 Int_t TFluka::IdFromPDG(Int_t pdg) const
461 // Return Fluka code from PDG and pseudo ENDF code
463 // MCIHAD() goes from pdg to fluka internal.
464 Int_t intfluka = mcihad(pdg);
465 // KPTOIP array goes from internal to official
466 return GetFlukaKPTOIP(intfluka);
469 Int_t TFluka::PDGFromId(Int_t id) const
472 // Return PDG code and pseudo ENDF code from Fluka code
474 //IPTOKP array goes from official to internal
476 if (fVerbosityLevel >= 1)
477 printf("PDGFromId: Error id = 0");
481 Int_t intfluka = GetFlukaIPTOKP(id);
483 if (fVerbosityLevel >= 1)
484 printf("PDGFromId: Error intfluka = 0");
486 } else if (intfluka < 0) {
487 if (fVerbosityLevel >= 1)
488 printf("PDGFromId: Error intfluka < 0");
491 if (fVerbosityLevel >= 3)
492 printf("mpdgha called with %d %d \n", id, intfluka);
493 return mpdgha(intfluka);
496 //_____________________________________________________________________________
497 // methods for physics management
498 //____________________________________________________________________________
503 void TFluka::SetProcess(const char* flagName, Int_t flagValue)
506 if (iNbOfProc < 100) {
507 for (i=0; i<iNbOfProc; i++) {
508 if (strcmp(&sProcessFlag[i][0],flagName) == 0) {
509 iProcessValue[iNbOfProc] = flagValue;
513 strcpy(&sProcessFlag[iNbOfProc][0],flagName);
514 iProcessValue[iNbOfProc++] = flagValue;
517 cout << "Nb of SetProcess calls exceeds 100 - ignored" << endl;
519 iNbOfProc = iNbOfProc;
522 void TFluka::SetCut(const char* cutName, Double_t cutValue)
525 if (iNbOfCut < 100) {
526 for (i=0; i<iNbOfCut; i++) {
527 if (strcmp(&sCutFlag[i][0],cutName) == 0) {
528 fCutValue[iNbOfCut] = cutValue;
532 strcpy(&sCutFlag[iNbOfCut][0],cutName);
533 fCutValue[iNbOfCut++] = cutValue;
536 cout << "Nb of SetCut calls exceeds 100 - ignored" << endl;
541 Double_t TFluka::Xsec(char*, Double_t, Int_t, Int_t)
543 printf("WARNING: Xsec not yet implemented !\n"); return -1.;
547 void TFluka::InitPhysics()
549 // Last material number taken from the "corealice.inp" file, presently 31
550 // !!! it should be available from Flugg !!!
553 Float_t fLastMaterial = 31.0;
555 // construct file names
556 TString sAliceInp = getenv("ALICE_ROOT");
557 sAliceInp +="/TFluka/input/";
558 TString sAliceCoreInp = sAliceInp;
559 sAliceInp += GetInputFileName();
560 sAliceCoreInp += GetCoreInputFileName();
561 ifstream AliceCoreInp(sAliceCoreInp.Data());
562 ofstream AliceInp(sAliceInp.Data());
564 // copy core input file until (not included) START card
566 Float_t fEventsPerRun;
567 while (AliceCoreInp.getline(sLine,255)) {
568 if (strncmp(sLine,"START",5) != 0)
569 AliceInp << sLine << endl;
571 sscanf(sLine+10,"%10f",&fEventsPerRun);
577 // in G3 the process control values meaning can be different for
578 // different processes, but for most of them is:
579 // 0 process is not activated
580 // 1 process is activated WITH generation of secondaries
581 // 2 process is activated WITHOUT generation of secondaries
582 // if process does not generate secondaries => 1 same as 2
591 // Loop over number of SetProcess calls
592 AliceInp << "*----------------------------------------------------------------------------- ";
594 AliceInp << "*----- The following data are generated from SetProcess and SetCut calls ----- ";
596 AliceInp << "*----------------------------------------------------------------------------- ";
598 for (i=0; i<iNbOfProc; i++) {
601 // G3 default value: 1
602 // G4 processes: G4eplusAnnihilation/G4IeplusAnnihilation
605 // flag = 0 no annihilation
606 // flag = 1 annihilation, decays processed
607 // flag = 2 annihilation, no decay product stored
608 // gMC ->SetProcess("ANNI",1); // EMFCUT -1. 0. 0. 3. lastmat 0. ANNH-THR
609 if (strncmp(&sProcessFlag[i][0],"ANNI",4) == 0) {
610 if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
613 AliceInp << "*Kinetic energy threshold (GeV) for e+ annihilation - resets to default=0.";
615 AliceInp << "*Generated from call: SetProcess('ANNI',1) or SetProcess('ANNI',2)";
617 AliceInp << setw(10) << "EMFCUT ";
618 AliceInp << setiosflags(ios::scientific) << setprecision(5);
619 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
620 AliceInp << setw(10) << -1.0; // kinetic energy threshold (GeV) for e+ annihilation (resets to default=0)
621 AliceInp << setw(10) << 0.0; // not used
622 AliceInp << setw(10) << 0.0; // not used
623 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
624 AliceInp << setw(10) << setprecision(2);
625 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
626 AliceInp << setprecision(1);
627 AliceInp << setw(10) << 1.0; // step length in assigning indices
628 AliceInp << setw(8) << "ANNH-THR";
631 else if (iProcessValue[i] == 0) {
634 AliceInp << "*No annihilation - no FLUKA card generated";
636 AliceInp << "*Generated from call: SetProcess('ANNI',0)";
642 AliceInp << "*Illegal flag value in SetProcess('ANNI',?) call.";
644 AliceInp << "*No FLUKA card generated";
649 // bremsstrahlung and pair production are both activated
650 // G3 default value: 1
651 // G4 processes: G4eBremsstrahlung/G4IeBremsstrahlung,
652 // G4MuBremsstrahlung/G4IMuBremsstrahlung,
653 // G4LowEnergyBremstrahlung
654 // Particles: e-/e+; mu+/mu-
656 // flag = 0 no bremsstrahlung
657 // flag = 1 bremsstrahlung, photon processed
658 // flag = 2 bremsstrahlung, no photon stored
659 // gMC ->SetProcess("BREM",1); // PAIRBREM 2. 0. 0. 3. lastmat
660 // EMFCUT -1. 0. 0. 3. lastmat 0. ELPO-THR
661 // G3 default value: 1
662 // G4 processes: G4GammaConversion,
663 // G4MuPairProduction/G4IMuPairProduction
664 // G4LowEnergyGammaConversion
665 // Particles: gamma, mu
667 // flag = 0 no delta rays
668 // flag = 1 delta rays, secondaries processed
669 // flag = 2 delta rays, no secondaries stored
670 // gMC ->SetProcess("PAIR",1); // PAIRBREM 1. 0. 0. 3. lastmat
671 // EMFCUT 0. 0. -1. 3. lastmat 0. PHOT-THR
672 else if ((strncmp(&sProcessFlag[i][0],"PAIR",4) == 0) && (iProcessValue[i] == 1 || iProcessValue[i] == 2)) {
673 for (j=0; j<iNbOfProc; j++) {
674 if ((strncmp(&sProcessFlag[j][0],"BREM",4) == 0) && (iProcessValue[j] == 1 || iProcessValue[j] == 2)) {
677 AliceInp << "*Bremsstrahlung and pair production by muons and charged hadrons both activated";
679 AliceInp << "*Generated from call: SetProcess('BREM',1) and SetProcess('PAIR',1)";
681 AliceInp << "*Energy threshold set by call SetCut('BCUTM',cut) or set to 0.";
683 AliceInp << "*Energy threshold set by call SetCut('PPCUTM',cut) or set to 0.";
685 AliceInp << setw(10) << "PAIRBREM ";
686 AliceInp << setiosflags(ios::scientific) << setprecision(5);
687 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
688 AliceInp << setw(10) << 3.0; // bremsstrahlung and pair production by muons and charged hadrons both are activated
689 // direct pair production by muons
690 // G4 particles: "e-", "e+"
691 // G3 default value: 0.01 GeV
692 //gMC ->SetCut("PPCUTM",cut); // total energy cut for direct pair prod. by muons
694 for (k=0; k<iNbOfCut; k++) {
695 if (strncmp(&sCutFlag[k][0],"PPCUTM",6) == 0) fCut = fCutValue[k];
697 AliceInp << setiosflags(ios::scientific) << setprecision(5);
698 AliceInp << setw(10) << fCut; // e+, e- kinetic energy threshold (in GeV) for explicit pair production.
699 // muon and hadron bremsstrahlung
700 // G4 particles: "gamma"
701 // G3 default value: CUTGAM=0.001 GeV
702 //gMC ->SetCut("BCUTM",cut); // cut for muon and hadron bremsstrahlung
704 for (k=0; k<iNbOfCut; k++) {
705 if (strncmp(&sCutFlag[k][0],"BCUTM",5) == 0) fCut = fCutValue[k];
707 AliceInp << setiosflags(ios::scientific) << setprecision(5);
708 AliceInp << setw(10) << fCut; // photon energy threshold (GeV) for explicit bremsstrahlung production
709 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
710 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
711 AliceInp << setw(10) << setprecision(2);
712 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
718 AliceInp << "*Kinetic energy threshold (GeV) for e+/e- bremsstrahlung - resets to default=0.";
720 AliceInp << "*Generated from call: SetProcess('BREM',1);";
722 AliceInp << setw(10) << "EMFCUT ";
724 for (k=0; k<iNbOfCut; k++) {
725 if (strncmp(&sCutFlag[k][0],"BCUTE",5) == 0) fCut = fCutValue[k];
727 AliceInp << setiosflags(ios::scientific) << setprecision(5);
728 AliceInp << setw(10) << fCut; // kinetic energy threshold (GeV) for e+/e- bremsstrahlung (resets to default=0)
729 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
730 AliceInp << setw(10) << 0.0; // not used
731 AliceInp << setw(10) << 0.0; // not used
732 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
733 AliceInp << setw(10) << setprecision(2);
734 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
735 AliceInp << setprecision(1);
736 AliceInp << setw(10) << 1.0; // step length in assigning indices
737 AliceInp << setw(8) << "ELPO-THR";
743 AliceInp << "*Pair production by electrons is activated";
745 AliceInp << "*Generated from call: SetProcess('PAIR',1);";
747 AliceInp << setw(10) << "EMFCUT ";
748 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
749 AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Compton scattering (= 0.0 : ignored)
750 AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Photoelectric (= 0.0 : ignored)
752 for (j=0; j<iNbOfCut; j++) {
753 if (strncmp(&sCutFlag[j][0],"CUTGAM",6) == 0) fCut = fCutValue[j];
755 AliceInp << setiosflags(ios::scientific) << setprecision(5);
756 AliceInp << setw(10) << fCut; // energy threshold (GeV) for gamma pair production (< 0.0 : resets to default, = 0.0 : ignored)
757 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
758 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
759 AliceInp << setprecision(2);
760 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
761 AliceInp << setprecision(1);
762 AliceInp << setw(10) << 1.0; // step length in assigning indices
763 AliceInp << setw(8) << "PHOT-THR";
766 } // end of if for BREM
767 } // end of loop for BREM
769 // only pair production by muons and charged hadrons is activated
772 AliceInp << "*Pair production by muons and charged hadrons is activated";
774 AliceInp << "*Generated from call: SetProcess('PAIR',1) or SetProcess('PAIR',2)";
776 AliceInp << "*Energy threshold set by call SetCut('PPCUTM',cut) or set to 0.";
778 AliceInp << setw(10) << "PAIRBREM ";
779 AliceInp << setiosflags(ios::scientific) << setprecision(5);
780 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
781 AliceInp << setw(10) << 1.0; // pair production by muons and charged hadrons is activated
782 // direct pair production by muons
783 // G4 particles: "e-", "e+"
784 // G3 default value: 0.01 GeV
785 //gMC ->SetCut("PPCUTM",cut); // total energy cut for direct pair prod. by muons
786 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
787 AliceInp << setw(10) << 0.0; // e+, e- kinetic energy threshold (in GeV) for explicit pair production.
788 AliceInp << setw(10) << 0.0; // no explicit bremsstrahlung production is simulated
789 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
790 AliceInp << setprecision(2);
791 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
797 AliceInp << "*Pair production by electrons is activated";
799 AliceInp << "*Generated from call: SetProcess('PAIR',1) or SetProcess('PAIR',2)";
801 AliceInp << setw(10) << "EMFCUT ";
802 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
803 AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Compton scattering (= 0.0 : ignored)
804 AliceInp << setw(10) << 0.0; // energy threshold (GeV) for Photoelectric (= 0.0 : ignored)
807 for (j=0; j<iNbOfCut; j++) {
808 if (strncmp(&sCutFlag[j][0],"CUTGAM",6) == 0) fCut = fCutValue[j];
810 AliceInp << setiosflags(ios::scientific) << setprecision(5);
811 AliceInp << setw(10) << fCut; // energy threshold (GeV) for gamma pair production (< 0.0 : resets to default, = 0.0 : ignored)
812 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
813 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
814 AliceInp << setprecision(2);
815 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
816 AliceInp << setprecision(1);
817 AliceInp << setw(10) << 1.0; // step length in assigning indices
818 AliceInp << setw(8) << "PHOT-THR";
823 } // end of if for PAIR
828 // G3 default value: 1
829 // G4 processes: G4eBremsstrahlung/G4IeBremsstrahlung,
830 // G4MuBremsstrahlung/G4IMuBremsstrahlung,
831 // G4LowEnergyBremstrahlung
832 // Particles: e-/e+; mu+/mu-
834 // flag = 0 no bremsstrahlung
835 // flag = 1 bremsstrahlung, photon processed
836 // flag = 2 bremsstrahlung, no photon stored
837 // gMC ->SetProcess("BREM",1); // PAIRBREM 2. 0. 0. 3. lastmat
838 // EMFCUT -1. 0. 0. 3. lastmat 0. ELPO-THR
839 else if (strncmp(&sProcessFlag[i][0],"BREM",4) == 0) {
840 for (j=0; j<iNbOfProc; j++) {
841 if ((strncmp(&sProcessFlag[j][0],"PAIR",4) == 0) && iProcessValue[j] == 1) goto NOBREM;
843 if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
846 AliceInp << "*Bremsstrahlung by muons and charged hadrons is activated";
848 AliceInp << "*Generated from call: SetProcess('BREM',1) or SetProcess('BREM',2)";
850 AliceInp << "*Energy threshold set by call SetCut('BCUTM',cut) or set to 0.";
852 AliceInp << setw(10) << "PAIRBREM ";
853 AliceInp << setiosflags(ios::scientific) << setprecision(5);
854 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
855 AliceInp << setw(10) << 2.0; // bremsstrahlung by muons and charged hadrons is activated
856 AliceInp << setw(10) << 0.0; // no meaning
857 // muon and hadron bremsstrahlung
858 // G4 particles: "gamma"
859 // G3 default value: CUTGAM=0.001 GeV
860 //gMC ->SetCut("BCUTM",cut); // cut for muon and hadron bremsstrahlung
862 for (j=0; j<iNbOfCut; j++) {
863 if (strncmp(&sCutFlag[j][0],"BCUTM",5) == 0) fCut = fCutValue[j];
865 AliceInp << setw(10) << fCut; // photon energy threshold (GeV) for explicit bremsstrahlung production
866 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
867 AliceInp << setw(10) << setprecision(2);
868 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
874 AliceInp << "*Kinetic energy threshold (GeV) for e+/e- bremsstrahlung - resets to default=0.";
876 AliceInp << "*Generated from call: SetProcess('BREM',1);";
878 AliceInp << setw(10) << "EMFCUT ";
879 AliceInp << setiosflags(ios::scientific) << setprecision(5);
880 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
881 AliceInp << setw(10) << -1.0; // kinetic energy threshold (GeV) for e+/e- bremsstrahlung (resets to default=0)
882 AliceInp << setw(10) << 0.0; // not used
883 AliceInp << setw(10) << 0.0; // not used
884 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
885 AliceInp << setw(10) << setprecision(2);
886 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
887 AliceInp << setprecision(1);
888 AliceInp << setw(10) << 1.0; // step length in assigning indices
889 AliceInp << setw(8) << "ELPO-THR";
892 else if (iProcessValue[i] == 0) {
895 AliceInp << "*No bremsstrahlung - no FLUKA card generated";
897 AliceInp << "*Generated from call: SetProcess('BREM',0)";
903 AliceInp << "*Illegal flag value in SetProcess('BREM',?) call.";
905 AliceInp << "*No FLUKA card generated";
910 } // end of else if (strncmp(&sProcessFlag[i][0],"BREM",4) == 0)
913 // Cerenkov photon generation
914 // G3 default value: 0
915 // G4 process: G4Cerenkov
917 // Particles: charged
919 // flag = 0 no Cerenkov photon generation
920 // flag = 1 Cerenkov photon generation
921 // flag = 2 Cerenkov photon generation with primary stopped at each step
922 //xx gMC ->SetProcess("CKOV",1); // ??? Cerenkov photon generation
923 else if (strncmp(&sProcessFlag[i][0],"CKOV",4) == 0) {
924 if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
927 AliceInp << "*Cerenkov photon generation";
929 AliceInp << "*Generated from call: SetProcess('CKOV',1) or SetProcess('CKOV',2)";
931 AliceInp << setw(10) << "OPT-PROD ";
932 AliceInp << setiosflags(ios::scientific) << setprecision(5);
933 AliceInp << setw(10) << 2.07e-9 ; // minimum Cerenkov photon emission energy (in GeV!). Default: 2.07E-9 GeV (corresponding to 600 nm)
934 AliceInp << setw(10) << 4.96e-9; // maximum Cerenkov photon emission energy (in GeV!). Default: 4.96E-9 GeV (corresponding to 250 nm)
935 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
936 AliceInp << setw(10) << 0.0; // not used
937 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
938 AliceInp << setprecision(2);
939 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
940 AliceInp << setprecision(1);
941 AliceInp << setw(10) << 1.0; // step length in assigning indices
942 AliceInp << setw(8) << "CERENKOV";
945 else if (iProcessValue[i] == 0) {
948 AliceInp << "*No Cerenkov photon generation";
950 AliceInp << "*Generated from call: SetProcess('CKOV',0)";
952 AliceInp << setw(10) << "OPT-PROD ";
953 AliceInp << setiosflags(ios::scientific) << setprecision(5);
954 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
955 AliceInp << setw(10) << 0.0; // not used
956 AliceInp << setw(10) << 0.0; // not used
957 AliceInp << setw(10) << 0.0; // not used
958 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
959 AliceInp << setprecision(2);
960 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
961 AliceInp << setprecision(1);
962 AliceInp << setw(10) << 1.0; // step length in assigning indices
963 AliceInp << setw(8) << "CERE-OFF";
969 AliceInp << "*Illegal flag value in SetProcess('CKOV',?) call.";
971 AliceInp << "*No FLUKA card generated";
974 } // end of else if (strncmp(&sProcessFlag[i][0],"CKOV",4) == 0)
977 // Compton scattering
978 // G3 default value: 1
979 // G4 processes: G4ComptonScattering,
980 // G4LowEnergyCompton,
981 // G4PolarizedComptonScattering
984 // flag = 0 no Compton scattering
985 // flag = 1 Compton scattering, electron processed
986 // flag = 2 Compton scattering, no electron stored
987 // gMC ->SetProcess("COMP",1); // EMFCUT -1. 0. 0. 3. lastmat 0. PHOT-THR
988 else if (strncmp(&sProcessFlag[i][0],"COMP",4) == 0) {
989 if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
992 AliceInp << "*Energy threshold (GeV) for Compton scattering - resets to default=0.";
994 AliceInp << "*Generated from call: SetProcess('COMP',1);";
996 AliceInp << setw(10) << "EMFCUT ";
997 AliceInp << setiosflags(ios::scientific) << setprecision(5);
998 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
999 AliceInp << setw(10) << -1.0; // energy threshold (GeV) for Compton scattering - resets to default=0.
1000 AliceInp << setw(10) << 0.0; // not used
1001 AliceInp << setw(10) << 0.0; // not used
1002 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1003 AliceInp << setprecision(2);
1004 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1005 AliceInp << setprecision(1);
1006 AliceInp << setw(10) << 1.0; // step length in assigning indices
1007 AliceInp << setw(8) << "PHOT-THR";
1010 else if (iProcessValue[i] == 0) {
1013 AliceInp << "*No Compton scattering - no FLUKA card generated";
1015 AliceInp << "*Generated from call: SetProcess('COMP',0)";
1021 AliceInp << "*Illegal flag value in SetProcess('COMP',?) call.";
1023 AliceInp << "*No FLUKA card generated";
1026 } // end of else if (strncmp(&sProcessFlag[i][0],"COMP",4) == 0)
1029 // G3 default value: 1
1030 // G4 process: G4Decay
1032 // Particles: all which decay is applicable for
1034 // flag = 0 no decays
1035 // flag = 1 decays, secondaries processed
1036 // flag = 2 decays, no secondaries stored
1037 //gMC ->SetProcess("DCAY",1); // not available
1038 else if ((strncmp(&sProcessFlag[i][0],"DCAY",4) == 0) && iProcessValue[i] == 1)
1039 cout << "SetProcess for flag=" << &sProcessFlag[i][0] << " value=" << iProcessValue[i] << " not avaliable!" << endl;
1042 // G3 default value: 2
1043 // !! G4 treats delta rays in different way
1044 // G4 processes: G4eIonisation/G4IeIonization,
1045 // G4MuIonisation/G4IMuIonization,
1046 // G4hIonisation/G4IhIonisation
1047 // Particles: charged
1049 // flag = 0 no energy loss
1050 // flag = 1 restricted energy loss fluctuations
1051 // flag = 2 complete energy loss fluctuations
1052 // flag = 3 same as 1
1053 // flag = 4 no energy loss fluctuations
1054 // gMC ->SetProcess("DRAY",0); // DELTARAY 1.E+6 0. 0. 3. lastmat 0.
1055 else if (strncmp(&sProcessFlag[i][0],"DRAY",4) == 0) {
1056 if (iProcessValue[i] == 0 || iProcessValue[i] == 4) {
1059 AliceInp << "*Kinetic energy threshold (GeV) for delta ray production";
1061 AliceInp << "*Generated from call: SetProcess('DRAY',0) or SetProcess('DRAY',4)";
1063 AliceInp << "*No delta ray production by muons - threshold set artificially high";
1065 AliceInp << setw(10) << "DELTARAY ";
1066 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1067 AliceInp << setw(10) << 1.0e+6; // kinetic energy threshold (GeV) for delta ray production (discrete energy transfer)
1068 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1069 AliceInp << setw(10) << 0.0; // ignored
1070 AliceInp << setw(10) << 0.0; // ignored
1071 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1072 AliceInp << setw(10) << setprecision(2);
1073 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1074 AliceInp << setprecision(1);
1075 AliceInp << setw(10) << 1.0; // step length in assigning indices
1078 else if (iProcessValue[i] == 1 || iProcessValue[i] == 2 || iProcessValue[i] == 3) {
1081 AliceInp << "*Kinetic energy threshold (GeV) for delta ray production";
1083 AliceInp << "*Generated from call: SetProcess('DRAY',flag), flag=1,2,3";
1085 AliceInp << "*Delta ray production by muons switched on";
1087 AliceInp << "*Energy threshold set by call SetCut('DCUTM',cut) or set to 0.";
1089 AliceInp << setw(10) << "DELTARAY ";
1090 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1092 for (j=0; j<iNbOfCut; j++) {
1093 if (strncmp(&sCutFlag[j][0],"DCUTM",5) == 0) fCut = fCutValue[j];
1095 AliceInp << setw(10) << fCut; // kinetic energy threshold (GeV) for delta ray production (discrete energy transfer)
1096 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1097 AliceInp << setw(10) << 0.0; // ignored
1098 AliceInp << setw(10) << 0.0; // ignored
1099 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1100 AliceInp << setw(10) << setprecision(2);
1101 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1102 AliceInp << setprecision(1);
1103 AliceInp << setw(10) << 1.0; // step length in assigning indices
1109 AliceInp << "*Illegal flag value in SetProcess('DRAY',?) call.";
1111 AliceInp << "*No FLUKA card generated";
1114 } // end of else if (strncmp(&sProcessFlag[i][0],"DRAY",4) == 0)
1117 // G3 default value: 1
1118 // G4 processes: all defined by TG4PhysicsConstructorHadron
1120 // Particles: hadrons
1122 // flag = 0 no multiple scattering
1123 // flag = 1 hadronic interactions, secondaries processed
1124 // flag = 2 hadronic interactions, no secondaries stored
1125 // gMC ->SetProcess("HADR",1); // ??? hadronic process
1126 //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3) ?????
1127 else if (strncmp(&sProcessFlag[i][0],"HADR",4) == 0) {
1128 if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
1131 AliceInp << "*Hadronic interaction is ON by default in FLUKA";
1133 AliceInp << "*No FLUKA card generated";
1136 else if (iProcessValue[i] == 0) {
1139 AliceInp << "*Hadronic interaction is set OFF";
1141 AliceInp << "*Generated from call: SetProcess('HADR',0);";
1143 AliceInp << setw(10) << "MULSOPT ";
1144 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1145 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1146 AliceInp << setw(10) << 0.0; // ignored
1147 AliceInp << setw(10) << 3.0; // multiple scattering for hadrons and muons is completely suppressed
1148 AliceInp << setw(10) << 0.0; // no spin-relativistic corrections
1149 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1150 AliceInp << setprecision(2);
1151 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1158 AliceInp << "*Illegal flag value in SetProcess('HADR',?) call.";
1160 AliceInp << "*No FLUKA card generated";
1163 } // end of else if (strncmp(&sProcessFlag[i][0],"HADR",4) == 0)
1167 // G3 default value: 2
1168 // G4 processes: G4eIonisation/G4IeIonization,
1169 // G4MuIonisation/G4IMuIonization,
1170 // G4hIonisation/G4IhIonisation
1172 // Particles: charged
1174 // flag=0 no energy loss
1175 // flag=1 restricted energy loss fluctuations
1176 // flag=2 complete energy loss fluctuations
1178 // flag=4 no energy loss fluctuations
1179 // If the value ILOSS is changed, then (in G3) cross-sections and energy
1180 // loss tables must be recomputed via the command 'PHYSI'
1181 // gMC ->SetProcess("LOSS",2); // ??? IONFLUCT ? energy loss
1182 else if (strncmp(&sProcessFlag[i][0],"LOSS",4) == 0) {
1183 if (iProcessValue[i] == 2) { // complete energy loss fluctuations
1186 AliceInp << "*Complete energy loss fluctuations do not exist in FLUKA";
1188 AliceInp << "*Generated from call: SetProcess('LOSS',2);";
1190 AliceInp << "*flag=2=complete energy loss fluctuations";
1192 AliceInp << "*No input card generated";
1195 else if (iProcessValue[i] == 1 || iProcessValue[i] == 3) { // restricted energy loss fluctuations
1198 AliceInp << "*Restricted energy loss fluctuations";
1200 AliceInp << "*Generated from call: SetProcess('LOSS',1) or SetProcess('LOSS',3)";
1202 AliceInp << setw(10) << "IONFLUCT ";
1203 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1204 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1205 AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations (for hadrons and muons) switched on
1206 AliceInp << setw(10) << 1.0; // restricted energy loss fluctuations (for e+ and e-) switched on
1207 AliceInp << setw(10) << 1.0; // minimal accuracy
1208 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1209 AliceInp << setprecision(2);
1210 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1213 else if (iProcessValue[i] == 4) { // no energy loss fluctuations
1216 AliceInp << "*No energy loss fluctuations";
1218 AliceInp << "*Generated from call: SetProcess('LOSS',4)";
1220 AliceInp << setw(10) << -1.0; // restricted energy loss fluctuations (for hadrons and muons) switched off
1221 AliceInp << setw(10) << -1.0; // restricted energy loss fluctuations (for e+ and e-) switched off
1222 AliceInp << setw(10) << 1.0; // minimal accuracy
1223 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1224 AliceInp << setprecision(2);
1225 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1231 AliceInp << "*Illegal flag value in SetProcess('LOSS',?) call.";
1233 AliceInp << "*No FLUKA card generated";
1236 } // end of else if (strncmp(&sProcessFlag[i][0],"LOSS",4) == 0)
1239 // multiple scattering
1240 // G3 default value: 1
1241 // G4 process: G4MultipleScattering/G4IMultipleScattering
1243 // Particles: charged
1245 // flag = 0 no multiple scattering
1246 // flag = 1 Moliere or Coulomb scattering
1247 // flag = 2 Moliere or Coulomb scattering
1248 // flag = 3 Gaussian scattering
1249 // gMC ->SetProcess("MULS",1); // MULSOPT multiple scattering
1250 else if (strncmp(&sProcessFlag[i][0],"MULS",4) == 0) {
1251 if (iProcessValue[i] == 1 || iProcessValue[i] == 2 || iProcessValue[i] == 3) {
1254 AliceInp << "*Multiple scattering is ON by default for e+e- and for hadrons/muons";
1256 AliceInp << "*No FLUKA card generated";
1259 else if (iProcessValue[i] == 0) {
1262 AliceInp << "*Multiple scattering is set OFF";
1264 AliceInp << "*Generated from call: SetProcess('MULS',0);";
1266 AliceInp << setw(10) << "MULSOPT ";
1267 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1268 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1269 AliceInp << setw(10) << 0.0; // ignored
1270 AliceInp << setw(10) << 3.0; // multiple scattering for hadrons and muons is completely suppressed
1271 AliceInp << setw(10) << 3.0; // multiple scattering for e+ and e- is completely suppressed
1272 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1273 AliceInp << setprecision(2);
1274 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1280 AliceInp << "*Illegal flag value in SetProcess('MULS',?) call.";
1282 AliceInp << "*No FLUKA card generated";
1285 } // end of else if (strncmp(&sProcessFlag[i][0],"MULS",4) == 0)
1288 // muon nuclear interaction
1289 // G3 default value: 0
1290 // G4 processes: G4MuNuclearInteraction,
1291 // G4MuonMinusCaptureAtRest
1295 // flag = 0 no muon-nuclear interaction
1296 // flag = 1 nuclear interaction, secondaries processed
1297 // flag = 2 nuclear interaction, secondaries not processed
1298 // gMC ->SetProcess("MUNU",1); // MUPHOTON 1. 0. 0. 3. lastmat
1299 else if (strncmp(&sProcessFlag[i][0],"MUNU",4) == 0) {
1300 if (iProcessValue[i] == 1) {
1303 AliceInp << "*Muon nuclear interactions with production of secondary hadrons";
1305 AliceInp << "*Generated from call: SetProcess('MUNU',1);";
1307 AliceInp << setw(10) << "MUPHOTON ";
1308 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1309 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1310 AliceInp << setw(10) << 1.0; // full simulation of muon nuclear interactions and production of secondary hadrons
1311 AliceInp << setw(10) << 0.0; // ratio of longitudinal to transverse virtual photon cross-section - Default = 0.25.
1312 AliceInp << setw(10) << 0.0; // fraction of rho-like interactions ( must be < 1) - Default = 0.75.
1313 AliceInp << setprecision(1);
1314 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1315 AliceInp << setprecision(2);
1316 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1319 else if (iProcessValue[i] == 2) {
1322 AliceInp << "*Muon nuclear interactions without production of secondary hadrons";
1324 AliceInp << "*Generated from call: SetProcess('MUNU',2);";
1326 AliceInp << setw(10) << "MUPHOTON ";
1327 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1328 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1329 AliceInp << setw(10) << 2.0; // full simulation of muon nuclear interactions and production of secondary hadrons
1330 AliceInp << setw(10) << 0.0; // ratio of longitudinal to transverse virtual photon cross-section - Default = 0.25.
1331 AliceInp << setw(10) << 0.0; // fraction of rho-like interactions ( must be < 1) - Default = 0.75.
1332 AliceInp << setprecision(1);
1333 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1334 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1337 else if (iProcessValue[i] == 0) {
1340 AliceInp << "*No muon nuclear interaction - no FLUKA card generated";
1342 AliceInp << "*Generated from call: SetProcess('MUNU',0)";
1348 AliceInp << "*Illegal flag value in SetProcess('MUNU',?) call.";
1350 AliceInp << "*No FLUKA card generated";
1353 } // end of else if (strncmp(&sProcessFlag[i][0],"MUNU",4) == 0)
1357 // G3 default value: 0
1362 // gMC ->SetProcess("PFIS",0); // PHOTONUC -1. 0. 0. 3. lastmat 0.
1363 // flag = 0 no photon fission
1364 // flag = 1 photon fission, secondaries processed
1365 // flag = 2 photon fission, no secondaries stored
1366 else if (strncmp(&sProcessFlag[i][0],"PFIS",4) == 0) {
1367 if (iProcessValue[i] == 0) {
1370 AliceInp << "*No photonuclear interactions";
1372 AliceInp << "*Generated from call: SetProcess('PFIS',0);";
1374 AliceInp << setw(10) << "PHOTONUC ";
1375 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1376 AliceInp << setw(10) << -1.0; // no photonuclear interactions
1377 AliceInp << setw(10) << 0.0; // not used
1378 AliceInp << setw(10) << 0.0; // not used
1379 AliceInp << setw(10) << 3.0; // upper bound of the material indices in which the respective thresholds apply
1380 AliceInp << setprecision(2);
1381 AliceInp << setw(10) << fLastMaterial;
1382 AliceInp << setprecision(1); // upper bound of the material indices in which the respective thresholds apply
1383 AliceInp << setprecision(1);
1384 AliceInp << setw(10) << 1.0; // step length in assigning indices
1387 else if (iProcessValue[i] == 1) {
1390 AliceInp << "*Photon nuclear interactions are activated at all energies";
1392 AliceInp << "*Generated from call: SetProcess('PFIS',1);";
1394 AliceInp << setw(10) << "PHOTONUC ";
1395 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1396 AliceInp << setw(10) << 1.0; // photonuclear interactions are activated at all energies
1397 AliceInp << setw(10) << 0.0; // not used
1398 AliceInp << setw(10) << 0.0; // not used
1399 AliceInp << setprecision(2);
1400 AliceInp << setw(10) << 3.0; // upper bound of the material indices in which the respective thresholds apply
1401 AliceInp << setw(10) << fLastMaterial;
1402 AliceInp << setprecision(1); // upper bound of the material indices in which the respective thresholds apply
1403 AliceInp << setprecision(1);
1404 AliceInp << setw(10) << 1.0; // step length in assigning indices
1407 else if (iProcessValue[i] == 0) {
1410 AliceInp << "*No photofission - no FLUKA card generated";
1412 AliceInp << "*Generated from call: SetProcess('PFIS',0)";
1418 AliceInp << "*Illegal flag value in SetProcess('PFIS',?) call.";
1420 AliceInp << "*No FLUKA card generated";
1426 // photo electric effect
1427 // G3 default value: 1
1428 // G4 processes: G4PhotoElectricEffect
1429 // G4LowEnergyPhotoElectric
1432 // flag = 0 no photo electric effect
1433 // flag = 1 photo electric effect, electron processed
1434 // flag = 2 photo electric effect, no electron stored
1435 // gMC ->SetProcess("PHOT",1); // EMFCUT 0. -1. 0. 3. lastmat 0. PHOT-THR
1436 else if (strncmp(&sProcessFlag[i][0],"PHOT",4) == 0) {
1437 if (iProcessValue[i] == 1 || iProcessValue[i] == 2) {
1440 AliceInp << "*Photo electric effect is activated";
1442 AliceInp << "*Generated from call: SetProcess('PHOT',1);";
1444 AliceInp << setw(10) << "EMFCUT ";
1445 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1446 AliceInp << setw(10) << 0.0; // ignored
1447 AliceInp << setw(10) << -1.0; // resets to default=0.
1448 AliceInp << setw(10) << 0.0; // ignored
1449 AliceInp << setw(10) << 3.0; // upper bound of the material indices in which the respective thresholds apply
1450 AliceInp << setprecision(2);
1451 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1452 AliceInp << setprecision(1);
1453 AliceInp << setw(10) << 1.0; // step length in assigning indices
1454 AliceInp << setw(8) << "PHOT-THR";
1457 else if (iProcessValue[i] == 0) {
1460 AliceInp << "*No photo electric effect - no FLUKA card generated";
1462 AliceInp << "*Generated from call: SetProcess('PHOT',0)";
1468 AliceInp << "*Illegal flag value in SetProcess('PHOT',?) call.";
1470 AliceInp << "*No FLUKA card generated";
1473 } // else if (strncmp(&sProcessFlag[i][0],"PHOT",4) == 0)
1475 // Rayleigh scattering
1476 // G3 default value: 0
1477 // G4 process: G4OpRayleigh
1479 // Particles: optical photon
1481 // flag = 0 Rayleigh scattering off
1482 // flag = 1 Rayleigh scattering on
1483 //xx gMC ->SetProcess("RAYL",1);
1484 else if (strncmp(&sProcessFlag[i][0],"RAYL",4) == 0) {
1485 if (iProcessValue[i] == 1) {
1488 AliceInp << "*Rayleigh scattering is ON by default in FLUKA";
1490 AliceInp << "*No FLUKA card generated";
1493 else if (iProcessValue[i] == 0) {
1496 AliceInp << "*Rayleigh scattering is set OFF";
1498 AliceInp << "*Generated from call: SetProcess('RAYL',0);";
1500 AliceInp << setw(10) << "EMFRAY ";
1501 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1502 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1503 AliceInp << setw(10) << -1.0; // no Rayleigh scattering and no binding corrections for Compton
1504 AliceInp << setw(10) << 3.0; // lower bound of the material indices in which the respective thresholds apply
1505 AliceInp << setprecision(2);
1506 AliceInp << setw(10) << fLastMaterial; // upper bound of the material indices in which the respective thresholds apply
1512 AliceInp << "*Illegal flag value in SetProcess('RAYL',?) call.";
1514 AliceInp << "*No FLUKA card generated";
1517 } // end of else if (strncmp(&sProcessFlag[i][0],"RAYL",4) == 0)
1520 else { // processes not yet treated
1522 // Automatic calculation of tracking medium parameters
1523 // flag = 0 no automatic calculation
1524 // flag = 1 automatic calculation
1525 //xx gMC ->SetProcess("AUTO",1); // ??? automatic computation of the tracking medium parameters
1528 // light photon absorption (Cerenkov photons)
1529 // it is turned on when Cerenkov process is turned on
1530 // G3 default value: 0
1531 // G4 process: G4OpAbsorption, G4OpBoundaryProcess
1533 // Particles: optical photon
1535 // flag = 0 no absorption of Cerenkov photons
1536 // flag = 1 absorption of Cerenkov photons
1537 // gMC ->SetProcess("LABS",2); // ??? Cerenkov light absorption
1540 // To control energy loss fluctuation model
1541 // flag = 0 Urban model
1542 // flag = 1 PAI model
1543 // flag = 2 PAI+ASHO model (not active at the moment)
1544 //xx gMC ->SetProcess("STRA",1); // ??? energy fluctuation model
1546 // synchrotron radiation in magnetic field
1547 // G3 default value: 0
1548 // G4 process: G4SynchrotronRadiation
1552 // flag = 0 no synchrotron radiation
1553 // flag = 1 synchrotron radiation
1554 //xx gMC ->SetProcess("SYNC",1); // ??? synchrotron radiation generation
1556 cout << "SetProcess for flag=" << &sProcessFlag[i][0] << " value=" << iProcessValue[i] << " not yet implemented!" << endl;
1558 } //end of loop number of SetProcess calls
1561 // Loop over number of SetCut calls
1562 for (Int_t i=0; i<iNbOfCut; i++) {
1564 // cuts used in SetProcess calls
1565 if (strncmp(&sCutFlag[i][0],"BCUTM",5) == 0) continue;
1566 else if (strncmp(&sCutFlag[i][0],"BCUTE",5) == 0) continue;
1567 else if (strncmp(&sCutFlag[i][0],"DCUTM",5) == 0) continue;
1568 else if (strncmp(&sCutFlag[i][0],"PPCUTM",6) == 0) continue;
1571 // G4 particles: "gamma"
1572 // G3 default value: 0.001 GeV
1573 //gMC ->SetCut("CUTGAM",cut); // cut for gammas
1574 else if (strncmp(&sCutFlag[i][0],"CUTGAM",6) == 0) {
1577 AliceInp << "*Cut for gamma";
1579 AliceInp << "*Generated from call: SetCut('CUTGAM',cut);";
1581 AliceInp << setw(10) << "PART-THR ";
1582 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1583 AliceInp << setw(10) << -fCutValue[i];
1584 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1585 AliceInp << setw(10) << 7.0;
1590 // G4 particles: "e-"
1592 // G3 default value: 0.001 GeV
1593 //gMC ->SetCut("CUTELE",cut); // cut for e+,e-
1594 else if (strncmp(&sCutFlag[i][0],"CUTELE",6) == 0) {
1597 AliceInp << "*Cut for electrons";
1599 AliceInp << "*Generated from call: SetCut('CUTELE',cut);";
1601 AliceInp << setw(10) << "PART-THR ";
1602 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1603 AliceInp << setw(10) << -fCutValue[i];
1604 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1605 AliceInp << setw(10) << 3.0;
1606 AliceInp << setw(10) << 4.0;
1607 AliceInp << setw(10) << 1.0;
1612 // G4 particles: of type "baryon", "meson", "nucleus" with zero charge
1613 // G3 default value: 0.01 GeV
1614 //gMC ->SetCut("CUTNEU",cut); // cut for neutral hadrons
1615 else if (strncmp(&sCutFlag[i][0],"CUTNEU",6) == 0) {
1618 AliceInp << "*Cut for neutral hadrons";
1620 AliceInp << "*Generated from call: SetCut('CUTNEU',cut);";
1622 AliceInp << setw(10) << "PART-THR ";
1623 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1624 AliceInp << setw(10) << -fCutValue[i];
1625 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1626 AliceInp << setw(10) << 8.0; // Neutron
1627 AliceInp << setw(10) << 9.0; // Antineutron
1629 AliceInp << setw(10) << "PART-THR ";
1630 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1631 AliceInp << setw(10) << -fCutValue[i];
1632 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1633 AliceInp << setw(10) << 12.0; // Kaon zero long
1634 AliceInp << setw(10) << 12.0; // Kaon zero long
1636 AliceInp << setw(10) << "PART-THR ";
1637 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1638 AliceInp << setw(10) << -fCutValue[i];
1639 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1640 AliceInp << setw(10) << 17.0; // Lambda, 18=Antilambda
1641 AliceInp << setw(10) << 19.0; // Kaon zero short
1643 AliceInp << setw(10) << "PART-THR ";
1644 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1645 AliceInp << setw(10) << -fCutValue[i];
1646 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1647 AliceInp << setw(10) << 22.0; // Sigma zero, Pion zero, Kaon zero
1648 AliceInp << setw(10) << 25.0; // Antikaon zero
1650 AliceInp << setw(10) << "PART-THR ";
1651 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1652 AliceInp << setw(10) << -fCutValue[i];
1653 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1654 AliceInp << setw(10) << 32.0; // Antisigma zero
1655 AliceInp << setw(10) << 32.0; // Antisigma zero
1657 AliceInp << setw(10) << "PART-THR ";
1658 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1659 AliceInp << setw(10) << -fCutValue[i];
1660 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1661 AliceInp << setw(10) << 34.0; // Xi zero
1662 AliceInp << setw(10) << 35.0; // AntiXi zero
1664 AliceInp << setw(10) << "PART-THR ";
1665 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1666 AliceInp << setw(10) << -fCutValue[i];
1667 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1668 AliceInp << setw(10) << 47.0; // D zero
1669 AliceInp << setw(10) << 48.0; // AntiD zero
1671 AliceInp << setw(10) << "PART-THR ";
1672 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1673 AliceInp << setw(10) << -fCutValue[i];
1674 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1675 AliceInp << setw(10) << 53.0; // Xi_c zero
1676 AliceInp << setw(10) << 53.0; // Xi_c zero
1678 AliceInp << setw(10) << "PART-THR ";
1679 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1680 AliceInp << setw(10) << -fCutValue[i];
1681 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1682 AliceInp << setw(10) << 55.0; // Xi'_c zero
1683 AliceInp << setw(10) << 56.0; // Omega_c zero
1685 AliceInp << setw(10) << "PART-THR ";
1686 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1687 AliceInp << setw(10) << -fCutValue[i];
1688 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1689 AliceInp << setw(10) << 59.0; // AntiXi_c zero
1690 AliceInp << setw(10) << 59.0; // AntiXi_c zero
1692 AliceInp << setw(10) << "PART-THR ";
1693 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1694 AliceInp << setw(10) << -fCutValue[i];
1695 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1696 AliceInp << setw(10) << 61.0; // AntiXi'_c zero
1697 AliceInp << setw(10) << 62.0; // AntiOmega_c zero
1702 // G4 particles: of type "baryon", "meson", "nucleus" with non-zero charge
1703 // G3 default value: 0.01 GeV
1704 //gMC ->SetCut("CUTHAD",cut); // cut for charged hadrons
1705 else if (strncmp(&sCutFlag[i][0],"CUTHAD",6) == 0) {
1708 AliceInp << "*Cut for charged hadrons";
1710 AliceInp << "*Generated from call: SetCut('CUTHAD',cut);";
1712 AliceInp << setw(10) << "PART-THR ";
1713 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1714 AliceInp << setw(10) << -fCutValue[i];
1715 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1716 AliceInp << setw(10) << 1.0; // Proton
1717 AliceInp << setw(10) << 2.0; // Antiproton
1719 AliceInp << setw(10) << "PART-THR ";
1720 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1721 AliceInp << setw(10) << -fCutValue[i];
1722 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1723 AliceInp << setw(10) << 13.0; // Positive Pion, Negative Pion, Positive Kaon
1724 AliceInp << setw(10) << 16.0; // Negative Kaon
1726 AliceInp << setw(10) << "PART-THR ";
1727 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1728 AliceInp << setw(10) << -fCutValue[i];
1729 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1730 AliceInp << setw(10) << 20.0; // Negative Sigma
1731 AliceInp << setw(10) << 16.0; // Positive Sigma
1733 AliceInp << setw(10) << "PART-THR ";
1734 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1735 AliceInp << setw(10) << -fCutValue[i];
1736 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1737 AliceInp << setw(10) << 31.0; // Antisigma minus
1738 AliceInp << setw(10) << 33.0; // Antisigma plus
1739 AliceInp << setprecision(1);
1740 AliceInp << setw(10) << 2.0; // step length
1742 AliceInp << setw(10) << "PART-THR ";
1743 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1744 AliceInp << setw(10) << -fCutValue[i];
1745 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1746 AliceInp << setw(10) << 36.0; // Negative Xi, Positive Xi, Omega minus
1747 AliceInp << setw(10) << 39.0; // Antiomega
1749 AliceInp << setw(10) << "PART-THR ";
1750 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1751 AliceInp << setw(10) << -fCutValue[i];
1752 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1753 AliceInp << setw(10) << 45.0; // D plus
1754 AliceInp << setw(10) << 46.0; // D minus
1756 AliceInp << setw(10) << "PART-THR ";
1757 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1758 AliceInp << setw(10) << -fCutValue[i];
1759 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1760 AliceInp << setw(10) << 49.0; // D_s plus, D_s minus, Lambda_c plus
1761 AliceInp << setw(10) << 52.0; // Xi_c plus
1763 AliceInp << setw(10) << "PART-THR ";
1764 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1765 AliceInp << setw(10) << -fCutValue[i];
1766 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1767 AliceInp << setw(10) << 54.0; // Xi'_c plus
1768 AliceInp << setw(10) << 60.0; // AntiXi'_c minus
1769 AliceInp << setprecision(1);
1770 AliceInp << setw(10) << 6.0; // step length
1772 AliceInp << setw(10) << "PART-THR ";
1773 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1774 AliceInp << setw(10) << -fCutValue[i];
1775 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(2);
1776 AliceInp << setw(10) << 57.0; // Antilambda_c minus
1777 AliceInp << setw(10) << 58.0; // AntiXi_c minus
1782 // G4 particles: "mu+", "mu-"
1783 // G3 default value: 0.01 GeV
1784 //gMC ->SetCut("CUTMUO",cut); // cut for mu+, mu-
1785 else if (strncmp(&sCutFlag[i][0],"CUTMUO",6) == 0) {
1788 AliceInp << "*Cut for muons";
1790 AliceInp << "*Generated from call: SetCut('CUTMUO',cut);";
1792 AliceInp << setw(10) << "PART-THR ";
1793 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1794 AliceInp << setw(10) << -fCutValue[i];
1795 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1796 AliceInp << setprecision(2);
1797 AliceInp << setw(10) << 10.0;
1798 AliceInp << setw(10) << 11.0;
1801 // delta-rays by electrons
1802 // G4 particles: "e-"
1803 // G3 default value: 10**4 GeV
1804 // gMC ->SetCut("DCUTE",cut); // cut for deltarays by electrons ???????????????
1805 else if (strncmp(&sCutFlag[i][0],"DCUTE",5) == 0) {
1808 AliceInp << "*Cut for delta rays by electrons ????????????";
1810 AliceInp << "*Generated from call: SetCut('DCUTE',cut);";
1812 AliceInp << setw(10) << "EMFCUT ";
1813 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1814 AliceInp << setw(10) << -fCutValue[i];
1815 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1816 AliceInp << setw(10) << 0.0;
1817 AliceInp << setw(10) << 0.0;
1818 AliceInp << setw(10) << 3.0;
1819 AliceInp << setprecision(2);
1820 AliceInp << setw(10) << fLastMaterial;
1821 AliceInp << setprecision(1);
1822 AliceInp << setw(10) << 1.0;
1827 // time of flight cut in seconds
1828 // G4 particles: all
1829 // G3 default value: 0.01 GeV
1830 //gMC ->SetCut("TOFMAX",tofmax); // time of flight cuts in seconds
1831 else if (strncmp(&sCutFlag[i][0],"TOFMAX",6) == 0) {
1834 AliceInp << "*Time of flight cuts in seconds";
1836 AliceInp << "*Generated from call: SetCut('TOFMAX',tofmax);";
1838 AliceInp << setw(10) << "TIME-CUT ";
1839 AliceInp << setiosflags(ios::scientific) << setprecision(5);
1840 AliceInp << setw(10) << fCutValue[i]*1.e9;
1841 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint) << setprecision(1);
1842 AliceInp << setw(10) << 0.0;
1843 AliceInp << setw(10) << 0.0;
1844 AliceInp << setw(10) << -6.0; // lower bound of the particle numbers for which the transport time cut-off and/or the start signal is to be applied
1845 AliceInp << setprecision(2);
1846 AliceInp << setw(10) << 64.0; // upper bound of the particle numbers for which the transport time cut-off and/or the start signal is to be applied
1847 AliceInp << setprecision(1);
1848 AliceInp << setw(10) << 1.0; // step length in assigning numbers
1853 cout << "SetCut for flag=" << &sCutFlag[i][0] << " value=" << fCutValue[i] << " not yet implemented!" << endl;
1855 } //end of loop over SeCut calls
1857 // Add START and STOP card
1858 AliceInp << setw(10) << "START ";
1859 AliceInp << setiosflags(ios::fixed) << setiosflags(ios::showpoint);
1860 AliceInp << setw(10) << fEventsPerRun;
1862 AliceInp << setw(10) << "STOP ";
1868 void TFluka::SetMaxStep(Double_t)
1870 // SetMaxStep is dummy procedure in TFluka !
1871 if (fVerbosityLevel >=3)
1872 cout << "SetMaxStep is dummy procedure in TFluka !" << endl;
1875 void TFluka::SetMaxNStep(Int_t)
1877 // SetMaxNStep is dummy procedure in TFluka !
1878 if (fVerbosityLevel >=3)
1879 cout << "SetMaxNStep is dummy procedure in TFluka !" << endl;
1882 void TFluka::SetUserDecay(Int_t)
1884 // SetUserDecay is dummy procedure in TFluka !
1885 if (fVerbosityLevel >=3)
1886 cout << "SetUserDecay is dummy procedure in TFluka !" << endl;
1890 // dynamic properties
1892 void TFluka::TrackPosition(TLorentzVector& position) const
1894 // Return the current position in the master reference frame of the
1895 // track being transported
1896 // TRACKR.atrack = age of the particle
1897 // TRACKR.xtrack = x-position of the last point
1898 // TRACKR.ytrack = y-position of the last point
1899 // TRACKR.ztrack = z-position of the last point
1900 Int_t caller = GetCaller();
1901 if (caller == 1 || caller == 3 || caller == 6 || caller == 11 || caller == 12) { //bxdraw,endraw,usdraw
1902 position.SetX(GetXsco());
1903 position.SetY(GetYsco());
1904 position.SetZ(GetZsco());
1905 position.SetT(TRACKR.atrack);
1907 else if (caller == 4) { // mgdraw
1908 position.SetX(TRACKR.xtrack[TRACKR.ntrack]);
1909 position.SetY(TRACKR.ytrack[TRACKR.ntrack]);
1910 position.SetZ(TRACKR.ztrack[TRACKR.ntrack]);
1911 position.SetT(TRACKR.atrack);
1913 else if (caller == 5) { // sodraw
1914 position.SetX(TRACKR.xtrack[TRACKR.ntrack]);
1915 position.SetY(TRACKR.ytrack[TRACKR.ntrack]);
1916 position.SetZ(TRACKR.ztrack[TRACKR.ntrack]);
1920 Warning("TrackPosition","position not available");
1924 void TFluka::TrackPosition(Double_t& x, Double_t& y, Double_t& z) const
1926 // Return the current position in the master reference frame of the
1927 // track being transported
1928 // TRACKR.atrack = age of the particle
1929 // TRACKR.xtrack = x-position of the last point
1930 // TRACKR.ytrack = y-position of the last point
1931 // TRACKR.ztrack = z-position of the last point
1932 Int_t caller = GetCaller();
1933 if (caller == 1 || caller == 3 || caller == 6 || caller == 11 || caller == 12) { //bxdraw,endraw,usdraw
1938 else if (caller == 4) { // mgdraw
1939 x = TRACKR.xtrack[TRACKR.ntrack];
1940 y = TRACKR.ytrack[TRACKR.ntrack];
1941 z = TRACKR.ztrack[TRACKR.ntrack];
1943 else if (caller == 5) { // sodraw
1944 x = TRACKR.xtrack[TRACKR.ntrack];
1945 y = TRACKR.ytrack[TRACKR.ntrack];
1946 z = TRACKR.ztrack[TRACKR.ntrack];
1949 Warning("TrackPosition","position not available");
1952 void TFluka::TrackMomentum(TLorentzVector& momentum) const
1954 // Return the direction and the momentum (GeV/c) of the track
1955 // currently being transported
1956 // TRACKR.ptrack = momentum of the particle (not always defined, if
1957 // < 0 must be obtained from etrack)
1958 // TRACKR.cx,y,ztrck = direction cosines of the current particle
1959 // TRACKR.etrack = total energy of the particle
1960 // TRACKR.jtrack = identity number of the particle
1961 // PAPROP.am[TRACKR.jtrack] = particle mass in gev
1962 Int_t caller = GetCaller();
1963 if (caller != 2) { // not eedraw
1964 if (TRACKR.ptrack >= 0) {
1965 momentum.SetPx(TRACKR.ptrack*TRACKR.cxtrck);
1966 momentum.SetPy(TRACKR.ptrack*TRACKR.cytrck);
1967 momentum.SetPz(TRACKR.ptrack*TRACKR.cztrck);
1968 momentum.SetE(TRACKR.etrack);
1972 Double_t p = sqrt(TRACKR.etrack*TRACKR.etrack - PAPROP.am[TRACKR.jtrack+6]*PAPROP.am[TRACKR.jtrack+6]);
1973 momentum.SetPx(p*TRACKR.cxtrck);
1974 momentum.SetPy(p*TRACKR.cytrck);
1975 momentum.SetPz(p*TRACKR.cztrck);
1976 momentum.SetE(TRACKR.etrack);
1981 Warning("TrackMomentum","momentum not available");
1984 void TFluka::TrackMomentum(Double_t& px, Double_t& py, Double_t& pz, Double_t& e) const
1986 // Return the direction and the momentum (GeV/c) of the track
1987 // currently being transported
1988 // TRACKR.ptrack = momentum of the particle (not always defined, if
1989 // < 0 must be obtained from etrack)
1990 // TRACKR.cx,y,ztrck = direction cosines of the current particle
1991 // TRACKR.etrack = total energy of the particle
1992 // TRACKR.jtrack = identity number of the particle
1993 // PAPROP.am[TRACKR.jtrack] = particle mass in gev
1994 Int_t caller = GetCaller();
1995 if (caller != 2) { // not eedraw
1996 if (TRACKR.ptrack >= 0) {
1997 px = TRACKR.ptrack*TRACKR.cxtrck;
1998 py = TRACKR.ptrack*TRACKR.cytrck;
1999 pz = TRACKR.ptrack*TRACKR.cztrck;
2004 Double_t p = sqrt(TRACKR.etrack*TRACKR.etrack - PAPROP.am[TRACKR.jtrack+6]*PAPROP.am[TRACKR.jtrack+6]);
2005 px = p*TRACKR.cxtrck;
2006 py = p*TRACKR.cytrck;
2007 pz = p*TRACKR.cztrck;
2013 Warning("TrackMomentum","momentum not available");
2016 Double_t TFluka::TrackStep() const
2018 // Return the length in centimeters of the current step
2019 // TRACKR.ctrack = total curved path
2020 Int_t caller = GetCaller();
2021 if (caller == 1 || caller == 3 || caller == 6) //bxdraw,endraw,usdraw
2023 else if (caller == 4) //mgdraw
2024 return TRACKR.ctrack;
2029 Double_t TFluka::TrackLength() const
2032 // This is the sum of substeps !!!
2033 // TRACKR.ctrack = total curved path of the current step
2034 // Sum of the substeps is identical to TRACKR.ctrack if the is no mag. field
2035 // The sum of all step length starting from the beginning of the track
2036 // for the time being returns only the length in centimeters of the current step
2038 Int_t caller = GetCaller();
2039 if (caller == 1 || caller == 3 || caller == 4 || caller == 6) { //bxdraw,endraw,mgdraw,usdraw
2040 for ( Int_t j=0;j<TRACKR.ntrack;j++) {
2041 sum +=TRACKR.ttrack[j];
2049 Double_t TFluka::TrackTime() const
2051 // Return the current time of flight of the track being transported
2052 // TRACKR.atrack = age of the particle
2053 Int_t caller = GetCaller();
2054 if (caller == 1 || caller == 3 || caller == 4 || caller == 6) //bxdraw,endraw,mgdraw,usdraw
2055 return TRACKR.atrack;
2060 Double_t TFluka::Edep() const
2062 // Energy deposition
2063 // if TRACKR.ntrack = 0, TRACKR.mtrack = 0:
2064 // -->local energy deposition (the value and the point are not recorded in TRACKR)
2065 // but in the variable "rull" of the procedure "endraw.cxx"
2066 // if TRACKR.ntrack > 0, TRACKR.mtrack = 0:
2067 // -->no energy loss along the track
2068 // if TRACKR.ntrack > 0, TRACKR.mtrack > 0:
2069 // -->energy loss distributed along the track
2070 // TRACKR.dtrack = energy deposition of the jth deposition even
2072 for ( Int_t j=0;j<TRACKR.mtrack;j++) {
2073 sum +=TRACKR.dtrack[j];
2075 if (TRACKR.ntrack == 0 && TRACKR.mtrack == 0)
2082 Int_t TFluka::TrackPid() const
2084 // Return the id of the particle transported
2085 // TRACKR.jtrack = identity number of the particle
2086 Int_t caller = GetCaller();
2087 if (caller != 2) // not eedraw
2088 return PDGFromId(TRACKR.jtrack);
2093 Double_t TFluka::TrackCharge() const
2095 // Return charge of the track currently transported
2096 // PAPROP.ichrge = electric charge of the particle
2097 // TRACKR.jtrack = identity number of the particle
2098 Int_t caller = GetCaller();
2099 if (caller != 2) // not eedraw
2100 return PAPROP.ichrge[TRACKR.jtrack+6];
2105 Double_t TFluka::TrackMass() const
2107 // PAPROP.am = particle mass in GeV
2108 // TRACKR.jtrack = identity number of the particle
2109 Int_t caller = GetCaller();
2110 if (caller != 2) // not eedraw
2111 return PAPROP.am[TRACKR.jtrack+6];
2116 Double_t TFluka::Etot() const
2118 // TRACKR.etrack = total energy of the particle
2119 Int_t caller = GetCaller();
2120 if (caller != 2) // not eedraw
2121 return TRACKR.etrack;
2129 Bool_t TFluka::IsNewTrack() const
2132 // True if the track is not at the boundary of the current volume
2133 // Not true in some cases in bxdraw - to be solved
2134 Int_t caller = GetCaller();
2136 return 1; // how to handle double step ?????????????
2138 return 0; // ??????????????
2141 Bool_t TFluka::IsTrackInside() const
2143 // True if the track is not at the boundary of the current volume
2144 // In Fluka a step is always inside one kind of material
2145 // If the step would go behind the region of one material,
2146 // it will be shortened to reach only the boundary.
2147 // Therefore IsTrackInside() is always true.
2148 Int_t caller = GetCaller();
2149 if (caller == 1) // bxdraw
2155 Bool_t TFluka::IsTrackEntering() const
2157 // True if this is the first step of the track in the current volume
2159 Int_t caller = GetCaller();
2160 if (caller == 11) // bxdraw entering
2165 Bool_t TFluka::IsTrackExiting() const
2167 Int_t caller = GetCaller();
2168 if (caller == 12) // bxdraw exiting
2173 Bool_t TFluka::IsTrackOut() const
2175 // True if the track is out of the setup
2177 // Icode = 14: escape - call from Kaskad
2178 // Icode = 23: escape - call from Emfsco
2179 // Icode = 32: escape - call from Kasneu
2180 // Icode = 40: escape - call from Kashea
2181 // Icode = 51: escape - call from Kasoph
2186 iIcode == 51) return 1;
2190 Bool_t TFluka::IsTrackDisappeared() const
2192 // means all inelastic interactions and decays
2193 // iIcode from usdraw
2194 if (iIcode == 101 || // inelastic interaction
2195 iIcode == 102 || // particle decay
2196 iIcode == 214 || // in-flight annihilation
2197 iIcode == 215 || // annihilation at rest
2198 iIcode == 217 || // pair production
2199 iIcode == 221) return 1;
2203 Bool_t TFluka::IsTrackStop() const
2205 // True if the track energy has fallen below the threshold
2206 // means stopped by signal or below energy threshold
2207 // Icode = 12: stopping particle - call from Kaskad
2208 // Icode = 15: time kill - call from Kaskad
2209 // Icode = 21: below threshold, iarg=1 - call from Emfsco
2210 // Icode = 22: below threshold, iarg=2 - call from Emfsco
2211 // Icode = 24: time kill - call from Emfsco
2212 // Icode = 31: below threshold - call from Kasneu
2213 // Icode = 33: time kill - call from Kasneu
2214 // Icode = 41: time kill - call from Kashea
2215 // Icode = 52: time kill - call from Kasoph
2224 iIcode == 52) return 1;
2228 Bool_t TFluka::IsTrackAlive() const
2230 // means not disappeared or not out
2231 if (IsTrackDisappeared() || IsTrackOut() ) return 0;
2239 Int_t TFluka::NSecondaries() const
2240 // Number of secondary particles generated in the current step
2241 // FINUC.np = number of secondaries except light and heavy ions
2242 // FHEAVY.npheav = number of secondaries for light and heavy secondary ions
2244 Int_t caller = GetCaller();
2245 if (caller == 6) // valid only after usdraw
2246 return FINUC.np + FHEAVY.npheav;
2249 } // end of NSecondaries
2251 void TFluka::GetSecondary(Int_t isec, Int_t& particleId,
2252 TLorentzVector& position, TLorentzVector& momentum)
2254 Int_t caller = GetCaller();
2255 if (caller == 6) { // valid only after usdraw
2256 if (isec >= 0 && isec < FINUC.np) {
2257 particleId = PDGFromId(FINUC.kpart[isec]);
2258 position.SetX(fXsco);
2259 position.SetY(fYsco);
2260 position.SetZ(fZsco);
2261 position.SetT(TRACKR.atrack);
2262 // position.SetT(TRACKR.atrack+FINUC.agesec[isec]); //not yet implem.
2263 momentum.SetPx(FINUC.plr[isec]*FINUC.cxr[isec]);
2264 momentum.SetPy(FINUC.plr[isec]*FINUC.cyr[isec]);
2265 momentum.SetPz(FINUC.plr[isec]*FINUC.czr[isec]);
2266 momentum.SetE(FINUC.tki[isec] + PAPROP.am[FINUC.kpart[isec]+6]);
2268 else if (isec >= FINUC.np && isec < FINUC.np + FHEAVY.npheav) {
2269 Int_t jsec = isec - FINUC.np;
2270 particleId = FHEAVY.kheavy[jsec]; // this is Fluka id !!!
2271 position.SetX(fXsco);
2272 position.SetY(fYsco);
2273 position.SetZ(fZsco);
2274 position.SetT(TRACKR.atrack);
2275 // position.SetT(TRACKR.atrack+FHEAVY.agheav[jsec]); //not yet implem.
2276 momentum.SetPx(FHEAVY.pheavy[jsec]*FHEAVY.cxheav[jsec]);
2277 momentum.SetPy(FHEAVY.pheavy[jsec]*FHEAVY.cyheav[jsec]);
2278 momentum.SetPz(FHEAVY.pheavy[jsec]*FHEAVY.czheav[jsec]);
2279 if (FHEAVY.tkheav[jsec] >= 3 && FHEAVY.tkheav[jsec] <= 6)
2280 momentum.SetE(FHEAVY.tkheav[jsec] + PAPROP.am[jsec+6]);
2281 else if (FHEAVY.tkheav[jsec] > 6)
2282 momentum.SetE(FHEAVY.tkheav[jsec] + FHEAVY.amnhea[jsec]); // to be checked !!!
2285 Warning("GetSecondary","isec out of range");
2288 Warning("GetSecondary","no secondaries available");
2289 } // end of GetSecondary
2291 TMCProcess TFluka::ProdProcess(Int_t isec) const
2292 // Name of the process that has produced the secondary particles
2293 // in the current step
2295 const TMCProcess kIpNoProc = kPNoProcess;
2296 const TMCProcess kIpPDecay = kPDecay;
2297 const TMCProcess kIpPPair = kPPair;
2298 // const TMCProcess kIpPPairFromPhoton = kPPairFromPhoton;
2299 // const TMCProcess kIpPPairFromVirtualPhoton = kPPairFromVirtualPhoton;
2300 const TMCProcess kIpPCompton = kPCompton;
2301 const TMCProcess kIpPPhotoelectric = kPPhotoelectric;
2302 const TMCProcess kIpPBrem = kPBrem;
2303 // const TMCProcess kIpPBremFromHeavy = kPBremFromHeavy;
2304 // const TMCProcess kIpPBremFromElectronOrPositron = kPBremFromElectronOrPositron;
2305 const TMCProcess kIpPDeltaRay = kPDeltaRay;
2306 // const TMCProcess kIpPMoller = kPMoller;
2307 // const TMCProcess kIpPBhabha = kPBhabha;
2308 const TMCProcess kIpPAnnihilation = kPAnnihilation;
2309 // const TMCProcess kIpPAnnihilInFlight = kPAnnihilInFlight;
2310 // const TMCProcess kIpPAnnihilAtRest = kPAnnihilAtRest;
2311 const TMCProcess kIpPHadronic = kPHadronic;
2312 const TMCProcess kIpPMuonNuclear = kPMuonNuclear;
2313 const TMCProcess kIpPPhotoFission = kPPhotoFission;
2314 const TMCProcess kIpPRayleigh = kPRayleigh;
2315 // const TMCProcess kIpPCerenkov = kPCerenkov;
2316 // const TMCProcess kIpPSynchrotron = kPSynchrotron;
2318 Int_t mugamma = TRACKR.jtrack == 7 || TRACKR.jtrack == 10 || TRACKR.jtrack == 11;
2319 if (iIcode == 102) return kIpPDecay;
2320 else if (iIcode == 104 || iIcode == 217) return kIpPPair;
2321 // else if (iIcode == 104) return kIpPairFromPhoton;
2322 // else if (iIcode == 217) return kIpPPairFromVirtualPhoton;
2323 else if (iIcode == 219) return kIpPCompton;
2324 else if (iIcode == 221) return kIpPPhotoelectric;
2325 else if (iIcode == 105 || iIcode == 208) return kIpPBrem;
2326 // else if (iIcode == 105) return kIpPBremFromHeavy;
2327 // else if (iIcode == 208) return kPBremFromElectronOrPositron;
2328 else if (iIcode == 103 || iIcode == 400) return kIpPDeltaRay;
2329 else if (iIcode == 210 || iIcode == 212) return kIpPDeltaRay;
2330 // else if (iIcode == 210) return kIpPMoller;
2331 // else if (iIcode == 212) return kIpPBhabha;
2332 else if (iIcode == 214 || iIcode == 215) return kIpPAnnihilation;
2333 // else if (iIcode == 214) return kIpPAnnihilInFlight;
2334 // else if (iIcode == 215) return kIpPAnnihilAtRest;
2335 else if (iIcode == 101) return kIpPHadronic;
2336 else if (iIcode == 101) {
2337 if (!mugamma) return kIpPHadronic;
2338 else if (TRACKR.jtrack == 7) return kIpPPhotoFission;
2339 else return kIpPMuonNuclear;
2341 else if (iIcode == 225) return kIpPRayleigh;
2342 // Fluka codes 100, 300 and 400 still to be investigasted
2343 else return kIpNoProc;
2346 //Int_t StepProcesses(TArrayI &proc) const
2347 // Return processes active in the current step
2349 //ck = total energy of the particl ????????????????
2353 Int_t TFluka::VolId2Mate(Int_t id) const
2356 // Returns the material number for a given volume ID
2358 if (fVerbosityLevel >= 3)
2359 printf("VolId2Mate %d %d\n", id, fMediaByRegion[id-1]);
2360 return fMediaByRegion[id-1];
2363 const char* TFluka::VolName(Int_t id) const
2366 // Returns the volume name for a given volume ID
2368 FlukaVolume* vol = dynamic_cast<FlukaVolume*>((*fVolumeMediaMap)[id-1]);
2369 const char* name = vol->GetName();
2370 if (fVerbosityLevel >= 3)
2371 printf("VolName %d %s \n", id, name);
2375 Int_t TFluka::VolId(const Text_t* volName) const
2378 // Converts from volume name to volume ID.
2379 // Time consuming. (Only used during set-up)
2380 // Could be replaced by hash-table
2384 for (i = 0; i < fNVolumes; i++)
2386 FlukaVolume* vol = dynamic_cast<FlukaVolume*>((*fVolumeMediaMap)[i]);
2387 TString name = vol->GetName();
2388 strcpy(tmp, name.Data());
2390 if (!strcmp(tmp, volName)) break;
2398 Int_t TFluka::CurrentVolID(Int_t& copyNo) const
2401 // Return the logical id and copy number corresponding to the current fluka region
2403 int ir = fCurrentFlukaRegion;
2404 int id = (FGeometryInit::GetInstance())->CurrentVolID(ir, copyNo);
2406 if (fVerbosityLevel >= 3)
2407 printf("CurrentVolID: %d %d %d \n", ir, id, copyNo);
2411 Int_t TFluka::CurrentVolOffID(Int_t off, Int_t& copyNo) const
2414 // Return the logical id and copy number of off'th mother
2415 // corresponding to the current fluka region
2418 return CurrentVolID(copyNo);
2420 int ir = fCurrentFlukaRegion;
2421 int id = (FGeometryInit::GetInstance())->CurrentVolOffID(ir, off, copyNo);
2423 if (fVerbosityLevel >= 3)
2424 printf("CurrentVolOffID: %d %d %d \n", ir, id, copyNo);
2426 if (fVerbosityLevel >= 0)
2427 printf("CurrentVolOffID: Warning Mother not found !!!\n");
2432 const char* TFluka::CurrentVolName() const
2435 // Return the current volume name
2438 Int_t id = TFluka::CurrentVolID(copy);
2439 const char* name = TFluka::VolName(id);
2440 if (fVerbosityLevel >= 3)
2441 printf("CurrentVolumeName: %d %s \n", fCurrentFlukaRegion, name);
2445 const char* TFluka::CurrentVolOffName(Int_t off) const
2448 // Return the volume name of the off'th mother of the current volume
2451 Int_t id = TFluka::CurrentVolOffID(off, copy);
2452 const char* name = TFluka::VolName(id);
2453 if (fVerbosityLevel >= 3)
2454 printf("CurrentVolumeOffName: %d %s \n", fCurrentFlukaRegion, name);
2458 Int_t TFluka::CurrentMaterial(Float_t &a, Float_t &z,
2459 Float_t &dens, Float_t &radl, Float_t &absl) const
2462 // Return the current medium number
2465 Int_t id = TFluka::CurrentVolID(copy);
2466 Int_t med = TFluka::VolId2Mate(id);
2467 if (fVerbosityLevel >= 3)
2468 printf("CurrentMaterial: %d %d \n", fCurrentFlukaRegion, med);
2472 void TFluka::Gmtod(Float_t* xm, Float_t* xd, Int_t iflag)
2474 // Transforms a position from the world reference frame
2475 // to the current volume reference frame.
2477 // Geant3 desription:
2478 // ==================
2479 // Computes coordinates XD (in DRS)
2480 // from known coordinates XM in MRS
2481 // The local reference system can be initialized by
2482 // - the tracking routines and GMTOD used in GUSTEP
2483 // - a call to GMEDIA(XM,NUMED)
2484 // - a call to GLVOLU(NLEVEL,NAMES,NUMBER,IER)
2485 // (inverse routine is GDTOM)
2487 // If IFLAG=1 convert coordinates
2488 // IFLAG=2 convert direction cosinus
2491 Double_t xmD[3], xdD[3];
2492 xmD[0] = xm[0]; xmD[1] = xm[1]; xmD[2] = xm[2];
2493 (FGeometryInit::GetInstance())->Gmtod(xmD, xdD, iflag);
2494 xd[0] = xdD[0]; xd[1] = xdD[1]; xd[2] = xdD[2];
2498 void TFluka::Gmtod(Double_t* xm, Double_t* xd, Int_t iflag)
2500 // Transforms a position from the world reference frame
2501 // to the current volume reference frame.
2503 // Geant3 desription:
2504 // ==================
2505 // Computes coordinates XD (in DRS)
2506 // from known coordinates XM in MRS
2507 // The local reference system can be initialized by
2508 // - the tracking routines and GMTOD used in GUSTEP
2509 // - a call to GMEDIA(XM,NUMED)
2510 // - a call to GLVOLU(NLEVEL,NAMES,NUMBER,IER)
2511 // (inverse routine is GDTOM)
2513 // If IFLAG=1 convert coordinates
2514 // IFLAG=2 convert direction cosinus
2517 Double_t xmD[3], xdD[3];
2518 xdD[0] = xd[0]; xdD[1] = xd[1]; xdD[2] = xd[2];
2519 (FGeometryInit::GetInstance())->Gdtom(xmD, xdD, iflag);
2520 xm[0] = xmD[0]; xm[1] = xmD[1]; xm[2] = xmD[2];
2523 void TFluka::Gdtom(Float_t* xd, Float_t* xm, Int_t iflag)
2525 // Transforms a position from the current volume reference frame
2526 // to the world reference frame.
2528 // Geant3 desription:
2529 // ==================
2530 // Computes coordinates XM (Master Reference System
2531 // knowing the coordinates XD (Detector Ref System)
2532 // The local reference system can be initialized by
2533 // - the tracking routines and GDTOM used in GUSTEP
2534 // - a call to GSCMED(NLEVEL,NAMES,NUMBER)
2535 // (inverse routine is GMTOD)
2537 // If IFLAG=1 convert coordinates
2538 // IFLAG=2 convert direction cosinus
2544 void TFluka::Gdtom(Double_t* xd, Double_t* xm, Int_t iflag)
2546 // Transforms a position from the current volume reference frame
2547 // to the world reference frame.
2549 // Geant3 desription:
2550 // ==================
2551 // Computes coordinates XM (Master Reference System
2552 // knowing the coordinates XD (Detector Ref System)
2553 // The local reference system can be initialized by
2554 // - the tracking routines and GDTOM used in GUSTEP
2555 // - a call to GSCMED(NLEVEL,NAMES,NUMBER)
2556 // (inverse routine is GMTOD)
2558 // If IFLAG=1 convert coordinates
2559 // IFLAG=2 convert direction cosinus
2563 (FGeometryInit::GetInstance())->Gdtom(xm, xd, iflag);
2566 // ===============================================================
2567 void TFluka::FutoTest()
2569 Int_t icode, mreg, newreg, particleId;
2570 Double_t rull, xsco, ysco, zsco;
2571 TLorentzVector position, momentum;
2574 if (fVerbosityLevel >=3)
2575 cout << " icode=" << icode << endl;
2576 } else if (icode > 0 && icode <= 5) {
2579 if (fVerbosityLevel >=3)
2580 cout << " icode=" << icode
2583 TrackPosition(position);
2584 TrackMomentum(momentum);
2585 if (fVerbosityLevel >=3) {
2586 cout << "TLorentzVector positionX=" << position.X()
2587 << "positionY=" << position.Y()
2588 << "positionZ=" << position.Z()
2589 << "timeT=" << position.T() << endl;
2590 cout << "TLorentzVector momentumX=" << momentum.X()
2591 << "momentumY=" << momentum.Y()
2592 << "momentumZ=" << momentum.Z()
2593 << "energyE=" << momentum.E() << endl;
2594 cout << "TrackStep=" << TrackStep() << endl;
2595 cout << "TrackLength=" << TrackLength() << endl;
2596 cout << "TrackTime=" << TrackTime() << endl;
2597 cout << "Edep=" << Edep() << endl;
2598 cout << "TrackPid=" << TrackPid() << endl;
2599 cout << "TrackCharge=" << TrackCharge() << endl;
2600 cout << "TrackMass=" << TrackMass() << endl;
2601 cout << "Etot=" << Etot() << endl;
2602 cout << "IsNewTrack=" << IsNewTrack() << endl;
2603 cout << "IsTrackInside=" << IsTrackInside() << endl;
2604 cout << "IsTrackEntering=" << IsTrackEntering() << endl;
2605 cout << "IsTrackExiting=" << IsTrackExiting() << endl;
2606 cout << "IsTrackOut=" << IsTrackOut() << endl;
2607 cout << "IsTrackDisappeared=" << IsTrackDisappeared() << endl;
2608 cout << "IsTrackAlive=" << IsTrackAlive() << endl;
2611 Float_t x = position.X();
2612 Float_t y = position.Y();
2613 Float_t z = position.Z();
2616 xm[0] = x; xm[1] = y; xm[2] = z;
2617 if (fVerbosityLevel >= 3)
2618 printf("Global trackPosition: %f %f %f \n", x, y, z);
2620 if (fVerbosityLevel >= 3)
2621 printf("Local trackPosition: %f %f %f \n", xd[0], xd[1], xd[2]);
2623 if (fVerbosityLevel >= 3)
2624 printf("New trackPosition: %f %f %f \n", xm[0], xm[1], xm[2]);
2625 } else if((icode >= 10 && icode <= 15) ||
2626 (icode >= 20 && icode <= 24) ||
2627 (icode >= 30 && icode <= 33) ||
2628 (icode >= 40 && icode <= 41) ||
2629 (icode >= 50 && icode <= 52)) {
2637 if (fVerbosityLevel >=3) {
2638 cout << " icode=" << icode
2643 << " zsco=" << zsco << endl;
2645 TrackPosition(position);
2646 TrackMomentum(momentum);
2647 if (fVerbosityLevel >=3) {
2648 cout << "Edep=" << Edep() << endl;
2649 cout << "Etot=" << Etot() << endl;
2650 cout << "TrackPid=" << TrackPid() << endl;
2651 cout << "TrackCharge=" << TrackCharge() << endl;
2652 cout << "TrackMass=" << TrackMass() << endl;
2653 cout << "IsTrackOut=" << IsTrackOut() << endl;
2654 cout << "IsTrackDisappeared=" << IsTrackDisappeared() << endl;
2655 cout << "IsTrackStop=" << IsTrackStop() << endl;
2656 cout << "IsTrackAlive=" << IsTrackAlive() << endl;
2658 } else if((icode >= 100 && icode <= 105) ||
2662 (icode >= 214 && icode <= 215) ||
2675 if (fVerbosityLevel >=3) {
2676 cout << " icode=" << icode
2680 << " zsco=" << zsco << endl;
2681 cout << "TrackPid=" << TrackPid() << endl;
2682 cout << "NSecondaries=" << NSecondaries() << endl;
2685 for (Int_t isec=0; isec< NSecondaries(); isec++) {
2686 TFluka::GetSecondary(isec, particleId, position, momentum);
2687 if (fVerbosityLevel >=3) {
2688 cout << "TLorentzVector positionX=" << position.X()
2689 << "positionY=" << position.Y()
2690 << "positionZ=" << position.Z()
2691 << "timeT=" << position.T() << endl;
2692 cout << "TLorentzVector momentumX=" << momentum.X()
2693 << "momentumY=" << momentum.Y()
2694 << "momentumZ=" << momentum.Z()
2695 << "energyE=" << momentum.E() << endl;
2696 cout << "TrackPid=" << particleId << endl;
2699 } else if((icode == 19) ||
2705 newreg = GetNewreg();
2709 if (fVerbosityLevel >=3) {
2710 cout << " icode=" << icode
2712 << " newreg=" << newreg
2715 << " zsco=" << zsco << endl;
2718 } // end of FutoTest