1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
19 //#include <Riostream.h>
28 #include <TObjArray.h>
29 #include <TObjString.h>
30 #include <TTimeStamp.h>
32 #include "AliCDBMetaData.h"
33 #include "AliCDBEntry.h"
35 #include "AliTOFChannelOnlineArray.h"
36 #include "AliTOFChannelOnlineStatusArray.h"
37 #include "AliTOFDataDCS.h"
38 #include "AliTOFDCSmaps.h"
39 #include "AliTOFLvHvDataPoints.h"
40 #include "AliTOFGeometry.h"
41 #include "AliTOFPreprocessor.h"
42 #include "AliTOFFEEReader.h"
43 #include "AliTOFRawStream.h"
44 #include "AliTOFCableLengthMap.h"
45 #include "AliTOFcalibHisto.h"
46 #include "AliTOFFEEDump.h"
48 #include "AliTOFDeltaBCOffset.h"
49 #include "AliTOFCTPLatency.h"
50 #include "AliTOFRunParams.h"
51 #include "AliTOFT0FillOnlineCalib.h"
52 #include "AliTOFHitField.h"
53 #include "AliTOFChannelOffline.h"
55 #include "TGeoManager.h"
56 #include "AliGeomManager.h"
57 #include "AliTOFReadoutInfo.h"
59 // TOF preprocessor class.
60 // It takes data from DCS and passes them to the class AliTOFDataDCS, which
61 // processes them. The result is then written to the CDB.
62 // Analogously, it takes data form DAQ (both at Run level and inclusive -
63 // of all the runs - level, processes them, and stores both Reference Data
64 // and Online Calibration files in the CDB.
65 // Processing of Pulser/Noise Run data and of TOF FEE DCS map included also.
69 // return=1 : no DCS input data Map
70 // return=2 : no DCS input data processing
71 // return=3 : no DCS processed data was stored in Ref Data
72 // return=4 : no DAQ input for Ref Data
73 // return=5 : failed to store DAQ Ref Data
74 // return=6 : failed to retrieve DAQ data for calibration
75 // return=7 : problems in processing histos in the input DAQ file
76 // return=8 : failed to store Online Delays
77 // return=9 : failed to store Reference Data for Pulser
78 // return=10: failed to retrieve Pulser data
79 // return=11: failed to store Pulser map in OCDB
80 // return=12: failed to store Reference Data for Noise
81 // return=13: failed to retrieve Noise data
82 // return=14: failed to store Noise map in OCDB
83 // return=15: failed to retrieve FEE data from FXS
84 // return=16: failed to retrieve FEE data from OCDB
85 // return=17: failed to store FEE data in OCDB
86 // return=18: failed to store FEE reference data in OCDB
87 // return=20: failed in retrieving status variable
88 // return=100 : no DCS input data Map (HV and LV status)
89 // return=200 : no DCS input data processing (HV and LV status)
90 // return=300 : no DCS processed data was stored in Ref Data (HV and LV status)
92 ClassImp(AliTOFPreprocessor)
94 const Int_t AliTOFPreprocessor::fgkBinRangeAve = 13; // number of bins where to calculate the mean
95 const Double_t AliTOFPreprocessor::fgkIntegralThr = 100; // min number of entries to perform computation of delay per channel
96 const Double_t AliTOFPreprocessor::fgkThrPar = 0.013; // parameter used to trigger the calculation of the delay
98 //_____________________________________________________________________________
100 AliTOFPreprocessor::AliTOFPreprocessor(AliShuttleInterface* shuttle) :
101 AliPreprocessor("TOF", shuttle),
106 fStoreRefData(kTRUE),
111 fIsStatusMapChanged(0)
114 AddRunType("PHYSICS");
115 AddRunType("PULSER");
120 //_____________________________________________________________________________
122 AliTOFPreprocessor::~AliTOFPreprocessor()
127 //______________________________________________________________________________
128 void AliTOFPreprocessor::Initialize(Int_t run, UInt_t startTime,
131 // Creates AliTOFDataDCS object
133 AliPreprocessor::Initialize(run, startTime, endTime);
135 AliInfo(Form("\n\tRun %d \n\tStartTime %s \n\tEndTime %s \n\tStartTime DCS Query %s \n\tEndTime DCS Query %s", run,
136 TTimeStamp(startTime).AsString(),
137 TTimeStamp(endTime).AsString(), ((TTimeStamp)GetStartTimeDCSQuery()).AsString(), ((TTimeStamp)GetEndTimeDCSQuery()).AsString()));
139 fData = new AliTOFDataDCS(fRun, fStartTime, fEndTime, GetStartTimeDCSQuery(), GetEndTimeDCSQuery());
140 fHVLVmaps = new AliTOFLvHvDataPoints(fRun, fStartTime, fEndTime, GetStartTimeDCSQuery(), GetEndTimeDCSQuery());
141 fNChannels = AliTOFGeometry::NSectors()*(2*(AliTOFGeometry::NStripC()+AliTOFGeometry::NStripB())+AliTOFGeometry::NStripA())*AliTOFGeometry::NpadZ()*AliTOFGeometry::NpadX();
143 //_____________________________________________________________________________
144 Bool_t AliTOFPreprocessor::ProcessDCS(){
146 // check whether DCS should be processed or not...
148 TString runType = GetRunType();
149 Log(Form("RunType %s",runType.Data()));
151 if (runType != "PHYSICS"){
157 //_____________________________________________________________________________
159 UInt_t AliTOFPreprocessor::ProcessDCSDataPoints(TMap *dcsAliasMap)
161 // Fills data into a AliTOFDataDCS object
164 Log("Processing DCS DP");
165 TH1::AddDirectory(0);
167 Bool_t resultDCSMap=kFALSE;
168 Bool_t resultDCSStore=kFALSE;
172 fData->SetFDRFlag(fFDRFlag);
175 Log("No DCS map found: TOF exiting from Shuttle");
180 return 1;// return error Code for DCS input data not found
184 // The processing of the DCS input data is forwarded to AliTOFDataDCS
185 resultDCSMap=fData->ProcessData(*dcsAliasMap);
187 Log("Some problems occurred while processing DCS data, TOF exiting from Shuttle");
192 return 2;// return error Code for processed DCS data not stored
195 AliCDBMetaData metaDataDCS;
196 metaDataDCS.SetBeamPeriod(0);
197 metaDataDCS.SetResponsible("Chiara Zampolli");
198 metaDataDCS.SetComment("This preprocessor fills an AliTOFDataDCS object.");
199 AliInfo("Storing DCS Data");
200 resultDCSStore = StoreReferenceData("Calib","DCSData",fData, &metaDataDCS);
201 if (!resultDCSStore){
202 Log("Some problems occurred while storing DCS data results in Reference Data, TOF exiting from Shuttle");
207 return 3;// return error Code for processed DCS data not stored
220 //_____________________________________________________________________________
222 UInt_t AliTOFPreprocessor::ProcessHVandLVdps(TMap *dcsAliasMap)
225 //Fills data into a AliTOFLvHvDataPoints object
226 // Merges fStatus object with LV and HV status at SOR
227 // Updates fStatus object with LV and HV status
228 // at EOR in case of correct end of run
229 // at last but two value in case of end-of-run caused by TOF detector.
232 Log("Processing HV and LV DCS DPs");
233 TH1::AddDirectory(0);
235 Bool_t resultDCSMap=kFALSE;
237 // processing DCS HV and LV data points
239 fHVLVmaps->SetFDRFlag(fFDRFlag);
242 Log("No DCS map found: TOF exiting from Shuttle");
247 return 100;// return error Code for DCS input data not found
251 // The processing of the DCS input data is forwarded to AliTOFDataDCS
253 resultDCSMap = fHVLVmaps->ProcessData(*dcsAliasMap);
255 Log("Some problems occurred while processing DCS data, TOF exiting from Shuttle");
260 return 200;// return error Code for processed DCS data not stored
264 // check with plots. Start...
266 TH1F *hROsor = new TH1F("hROsor","RO status map at SOR",91*96*18,-0.5,91*96*18-0.5);
267 for (Int_t ii=1; ii<=91*96*18; ii++) hROsor->SetBinContent(ii,-1);
268 for (Int_t ii=0; ii<91*96*18; ii++) {
269 if (fStatus->GetHWStatus(ii)==AliTOFChannelOnlineStatusArray::kTOFHWBad)
270 hROsor->SetBinContent(ii+1,0);
271 else if (fStatus->GetHWStatus(ii)==AliTOFChannelOnlineStatusArray::kTOFHWOk)
272 hROsor->SetBinContent(ii+1,1);
275 TH1F *hROandHVandLVsor = new TH1F("hROandHVandLVsor","RO.and.HV.andLV status map at SOR",91*96*18,-0.5,91*96*18-0.5);
276 for (Int_t ii=1; ii<=91*96*18; ii++) hROandHVandLVsor->SetBinContent(ii,-1);
277 TH1F *hROandHVandLVeor = new TH1F("hROandHVandLVeor","RO.and.HV.andLV status map at EOR",91*96*18,-0.5,91*96*18-0.5);
278 for (Int_t ii=1; ii<=91*96*18; ii++) hROandHVandLVeor->SetBinContent(ii,-1);
281 AliTOFDCSmaps * lvANDhvMap = (AliTOFDCSmaps*)fHVLVmaps->GetHVandLVmapAtSOR(); // Get LV.and.HV status map at SOR
282 for (Int_t index=0; index<fNChannels; index++) {
283 if ( ( lvANDhvMap->GetCellValue(index)==0 &&
284 fStatus->GetHWStatus(index) != AliTOFChannelOnlineStatusArray::kTOFHWBad ) ||
285 ( lvANDhvMap->GetCellValue(index)==1 &&
286 fStatus->GetHWStatus(index) != AliTOFChannelOnlineStatusArray::kTOFHWOk ) ) {
287 fStatus->SetHWStatus(index, AliTOFChannelOnlineStatusArray::kTOFHWBad);
288 fIsStatusMapChanged=kTRUE;
292 // check with plots. Start...
294 for (Int_t ii=0; ii<91*96*18; ii++) {
295 if (fStatus->GetHWStatus(ii)==AliTOFChannelOnlineStatusArray::kTOFHWBad)
296 hROandHVandLVsor->SetBinContent(ii+1,0);
297 else if (fStatus->GetHWStatus(ii)==AliTOFChannelOnlineStatusArray::kTOFHWOk)
298 hROandHVandLVsor->SetBinContent(ii+1,1);
302 lvANDhvMap = (AliTOFDCSmaps*)fHVLVmaps->GetHVandLVmapAtEOR(); // Get LV.and.HV status map at EOR
303 for (Int_t index=0; index<fNChannels; index++) {
304 if ( ( lvANDhvMap->GetCellValue(index)==0 &&
305 fStatus->GetHWStatus(index)!=AliTOFChannelOnlineStatusArray::kTOFHWBad ) ||
306 ( lvANDhvMap->GetCellValue(index)==1 &&
307 fStatus->GetHWStatus(index) != AliTOFChannelOnlineStatusArray::kTOFHWOk ) ) {
308 fStatus->SetHWStatus(index, AliTOFChannelOnlineStatusArray::kTOFHWBad);
309 fIsStatusMapChanged=kTRUE;
313 // check with plots. Start...
315 for (Int_t ii=0; ii<91*96*18; ii++) {
316 if (fStatus->GetHWStatus(ii)==AliTOFChannelOnlineStatusArray::kTOFHWBad)
317 hROandHVandLVeor->SetBinContent(ii+1,0);
318 else if (fStatus->GetHWStatus(ii)==AliTOFChannelOnlineStatusArray::kTOFHWOk)
319 hROandHVandLVeor->SetBinContent(ii+1,1);
322 TCanvas *canvas = new TCanvas("canvas","",10,10,1000,1000);
323 canvas->SetFillColor(0);
326 hROsor->SetLineWidth(2);
329 hROandHVandLVsor->SetLineWidth(2);
330 hROandHVandLVsor->Draw();
332 hROandHVandLVeor->SetLineWidth(2);
333 hROandHVandLVeor->Draw();
342 /* check whether we don't need to update OCDB.
343 * in this case we can return without errors. */
345 if (!fIsStatusMapChanged) {
346 AliInfo("TOF HW status config has not changed. Do not overwrite stored file.");
347 return 0; // return ok
350 TString runType = GetRunType();
351 if (runType != "PHYSICS") {
352 AliInfo(Form("Run Type = %s, waiting to store status map",GetRunType()));
353 return 0; // return ok
356 // update the OCDB with the current FEE.and.HV.and.LV
357 // since even a little difference has been detected.
359 AliCDBMetaData metaData;
360 metaData.SetBeamPeriod(0);
361 metaData.SetResponsible("Roberto Preghenella");
362 metaData.SetComment("This preprocessor fills an AliTOFChannelOnlineStatusArray object from FEE.and.HV.and.LV data.");
363 AliInfo("Storing Status data from current run. Collected RO.and.HV.and.LV infos @ EOR");
364 // store TOF channel status
365 if (!Store("Calib", "Status", fStatus, &metaData, 0, kTRUE)) {
367 Log("problems while storing RO.and.HV.and.LV Status data object");
376 return 17; // return error code for problems while TOF channel status
379 // everything fine. return
394 //_____________________________________________________________________________
396 UInt_t AliTOFPreprocessor::ProcessOnlineDelays()
398 // Processing data from DAQ for online calibration
400 Bool_t updateOCDB = kFALSE;
401 Log("Processing DAQ delays");
403 // reading configuration map
404 TString compDelays = "kFALSE";
405 Int_t deltaStartingRun = fRun;
406 Int_t startingRun = fRun-deltaStartingRun;
407 Int_t binRangeAve = fgkBinRangeAve;
408 Double_t integralThr = fgkIntegralThr;
409 Double_t thrPar = fgkThrPar;
411 AliCDBEntry *cdbEntry = GetFromOCDB("Calib","Config");
413 Log(Form("No Configuration entry found in CDB, using default values: ComputingDelays = %s, StartingRun = %i",compDelays.Data(), startingRun));
416 TMap *configMap = (TMap*)cdbEntry->GetObject();
418 Log(Form("No map found in Config entry in CDB, using default values: ComputingDelays = %s, StartingRun = %i",compDelays.Data(), startingRun));
421 TObjString *strDelays = (TObjString*)configMap->GetValue("ComputingDelays");
423 compDelays = (TString) strDelays->GetString();
426 Log(Form("No ComputingDelays value found in Map from Config entry in CDB, using default value: ComputingDelays = %s",compDelays.Data()));
428 TObjString *strRun = (TObjString*)configMap->GetValue("StartingRun");
430 TString tmpstr = strRun->GetString();
431 startingRun = tmpstr.Atoi();
432 deltaStartingRun = fRun - startingRun;
435 Log(Form("No StartingRun value found in Map from Config entry in CDB, using default value: StartingRun = %i",startingRun));
437 TObjString *strBinRangeAve = (TObjString*)configMap->GetValue("BinRangeAve");
438 if (strBinRangeAve) {
439 TString tmpstr = strBinRangeAve->GetString();
440 binRangeAve = tmpstr.Atoi();
443 Log(Form("No BinRangeAve value found in Map from Config entry in CDB, using default value: BinRangeAve = %i",binRangeAve));
445 TObjString *strIntegralThr = (TObjString*)configMap->GetValue("IntegralThr");
446 if (strIntegralThr) {
447 TString tmpstr = strIntegralThr->GetString();
448 integralThr = tmpstr.Atof();
451 Log(Form("No IntegralThr value found in Map from Config entry in CDB, using default value: IntegralThr = %f",integralThr));
453 TObjString *strThrPar = (TObjString*)configMap->GetValue("ThrPar");
455 TString tmpstr = strThrPar->GetString();
456 thrPar = tmpstr.Atof();
459 Log(Form("No ThrPar value found in Map from Config entry in CDB, using default value: ThrPar = %f",thrPar));
463 if (compDelays == "kTRUE") fFDRFlag = kFALSE;
464 else fFDRFlag = kTRUE;
469 Log(Form("ComputingDelays = %s, StartingRun = %i",compDelays.Data(),startingRun));
471 /* init array with current calibration, if any */
472 fCal = new AliTOFChannelOnlineArray(fNChannels);
473 AliTOFChannelOnlineArray *curCal = NULL;
475 AliCDBEntry *cdbEntry2 = GetFromOCDB("Calib","ParOnlineDelay");
476 if (!cdbEntry2 || !cdbEntry2->GetObject()) {
477 /* no CDB entry found. set update flag */
478 Log(" ************ WARNING ************");
479 Log("No CDB ParOnlineDelay entry found, creating a new one!");
480 Log(" *********************************");
484 Log("Found previous ParOnlineDelay entry. Using it to init calibration");
485 curCal = (AliTOFChannelOnlineArray *)cdbEntry2->GetObject();
486 for (Int_t i = 0; i < fNChannels; i++)
487 fCal->SetDelay(i, curCal->GetDelay(i));
491 TH1::AddDirectory(0);
493 Bool_t resultDAQRef=kFALSE;
494 Bool_t resultTOFPP=kFALSE;
501 //retrieving data at Run level
502 TList* list = GetFileSources(kDAQ, "RUNLevel");
503 if (list !=0x0 && list->GetEntries()!=0)
505 AliInfo("The following sources produced files with the id RUNLevel");
507 for (Int_t jj=0;jj<list->GetEntries();jj++){
508 TObjString * str = dynamic_cast<TObjString*> (list->At(jj));
509 AliInfo(Form("found source %s", str->String().Data()));
510 // file to be stored run per run
511 TString fileNameRun = GetFile(kDAQ, "RUNLevel", str->GetName());
512 if (fileNameRun.Length()>0){
513 AliInfo(Form("Got the file %s, now we can store the Reference Data for the current Run.", fileNameRun.Data()));
514 daqFile = new TFile(fileNameRun.Data(),"READ");
515 h2 = (TH2S*) daqFile->Get("htof");
516 AliCDBMetaData metaDataHisto;
517 metaDataHisto.SetBeamPeriod(0);
518 metaDataHisto.SetResponsible("Chiara Zampolli");
519 metaDataHisto.SetComment("This preprocessor stores the array of histos object as Reference Data.");
520 AliInfo("Storing Reference Data");
521 resultDAQRef = StoreReferenceData("Calib","DAQData",h2, &metaDataHisto);
523 Log("some problems occurred::No Reference Data stored, TOF exiting from Shuttle");
528 return 5;//return error code for failure in storing Ref Data
535 Log("The input data file from DAQ (run-level) was not found, TOF exiting from Shuttle ");
539 return 4;//return error code for failure in retrieving Ref Data
545 Log("The input data file list from DAQ (run-level) was not found, TOF exiting from Shuttle ");
548 return 4;//return error code for failure in retrieving Ref Data
553 //Total files, with cumulative histos
555 TList* listTot = GetFileSources(kDAQ, "DELAYS");
556 if (listTot !=0x0 && listTot->GetEntries()!=0)
558 AliInfo("The following sources produced files with the id DELAYS");
560 for (Int_t jj=0;jj<listTot->GetEntries();jj++){
561 TObjString * str = dynamic_cast<TObjString*> (listTot->At(jj));
562 AliInfo(Form("found source %s", str->String().Data()));
564 // file with summed histos, to extract calib params
565 TString fileName = GetFile(kDAQ, "DELAYS", str->GetName());
566 if (fileName.Length()>0){
567 AliInfo(Form("Got the file %s, now we can extract some values.", fileName.Data()));
569 daqFile = new TFile(fileName.Data(),"READ");
571 h2 = (TH2S*) daqFile->Get("htoftot");
573 Log("some problems occurred:: No histo retrieved, TOF exiting from Shuttle");
578 return 7; //return error code for histograms not existing/junky
581 static const Int_t kSize=h2->GetNbinsX();
582 static const Int_t kNBins=h2->GetNbinsY();
583 static const Double_t kXBinmin=h2->GetYaxis()->GetBinLowEdge(1);
584 if (kSize != fNChannels){
585 Log(" number of bins along x different from number of pads, found only a subset of the histograms, TOF exiting from Shuttle");
591 return 7; //return error code for histograms not existing/junky
593 Int_t nNotStatistics = 0; // number of channel with not enough statistics
595 /* FDR flag set. do not compute delays, use nominal cable delays */
598 Log(" Not computing delays according to flag set in Config entry in OCDB!");
599 FillWithCosmicCalibration(fCal);
601 /* check whether the new calibration is different from the previous one */
602 if (curCal) { /* well, check also whether we have a previous calibration */
603 for (Int_t i = 0; i < fNChannels; i++) {
604 if (fCal->GetDelay(i) != curCal->GetDelay(i)) {
610 else /* otherwise update OCDB */
615 else { // computing delays if not in FDR runs
617 updateOCDB = kTRUE; /* always update OCDB when computing delays */
619 for (Int_t ich=0;ich<kSize;ich++){
620 /* check whether channel has been read out during current run.
621 * if the status is bad it means it has not been read out.
622 * in this case skip channel in order to not affect the mean */
623 if (fStatus->GetHWStatus(ich) == AliTOFChannelOnlineStatusArray::kTOFHWBad){
624 AliDebug(2,Form(" Channel %i found bad according to FEEmap, (HW status = %i), skipping from delay computing",ich, (Int_t)fStatus->GetHWStatus(ich)));
627 AliDebug(2,Form(" Channel %i found ok according to FEEmap, starting delay computing",ich));
628 TH1S *h1 = new TH1S("h1","h1",kNBins,kXBinmin-0.5,kNBins*1.+kXBinmin-0.5);
629 for (Int_t ibin=0;ibin<kNBins;ibin++){
630 h1->SetBinContent(ibin+1,h2->GetBinContent(ich+1,ibin+1));
632 if(h1->Integral()<integralThr) {
634 Log(Form(" Not enough statistics for bin %i, skipping this channel",ich)); // printing message only if not in FDR runs
640 Float_t minContent=h1->Integral()*thrPar;
641 Int_t nbinsX = h1->GetNbinsX();
643 for (Int_t j=1; j<=nbinsX; j++){
645 h1->GetBinContent(j) +
646 h1->GetBinContent(j+1)+
647 h1->GetBinContent(j+2)+
648 h1->GetBinContent(j+3))>minContent){
654 if(!found) AliInfo(Form("WARNING!!! no start of fit found for histo # %i",ich));
655 // Now calculate the mean over the interval.
659 for(Int_t k=0;k<binRangeAve;k++){
660 mean=mean+h1->GetBinCenter(startBin+k)*h1->GetBinContent(startBin+k);
661 nent=nent+h1->GetBinContent(startBin+k);
662 sumw2=sumw2+(h1->GetBinCenter(startBin+k))*(h1->GetBinCenter(startBin+k))*(h1->GetBinContent(startBin+k));
664 mean= mean/nent; //<x>
665 sumw2=sumw2/nent; //<x^2>
667 rmsmean = TMath::Sqrt((sumw2-mean*mean)/nent);
668 if (ich<fNChannels) {
669 Float_t delay = mean*AliTOFGeometry::TdcBinWidth()*1.E-3; // delay in ns
670 fCal->SetDelay(ich,delay); // delay in ns
671 AliDebug(2,Form("Setting delay %f (ns) for channel %i",delay,ich));
677 if (nNotStatistics!=0) Log(Form("Too little statistics for %d channels!",nNotStatistics));
684 Log("The Cumulative data file from DAQ does not exist, TOF exiting from Shuttle");
688 return 6;//return error code for problems in retrieving DAQ data
694 Log("Problem: no list for Cumulative data file from DAQ was found, TOF exiting from Shuttle");
697 return 6; //return error code for problems in retrieving DAQ data
700 /* check whether we don't need to update OCDB.
701 * in this case we can return without errors and
702 * the current FEE is stored in the fStatus object. */
704 AliInfo("update OCDB flag not set. Do not overwrite stored file.");
705 return 0; /* return ok */
709 AliCDBMetaData metaData;
710 metaData.SetBeamPeriod(0);
711 metaData.SetResponsible("Chiara Zampolli");
712 metaData.SetComment("This preprocessor fills an AliTOFChannelOnlineArray object for online calibration - delays.");
713 AliInfo("Storing Calibration Data");
714 resultTOFPP = Store("Calib","ParOnlineDelay",fCal, &metaData,deltaStartingRun,kTRUE);
716 Log("Some problems occurred while storing online object resulting from DAQ data processing");
719 return 8;//return error code for problems in storing DAQ data
730 //_____________________________________________________________________________
733 AliTOFPreprocessor::ProcessT0Fill()
735 // Processing data from DAQ for T0-fill measurement
737 Log("Processing T0-fill");
740 /* instance and setup CDB manager */
741 AliCDBManager *cdb = AliCDBManager::Instance();
743 if (!gGeoManager) AliGeomManager::LoadGeometry();
746 /* get params from OCDB */
747 AliCDBEntry *cdbe = NULL;
750 * at this stage status object is not on OCDB yet
751 * since it will be stored later. nevertheless we
752 * should have the array in memory since it has been
753 * already setup by ProcessFEF.
756 /* check status and latency window available */
757 if (!fStatus || !fLatencyWindow){
758 AliError("No valid fStatus or fLatencyWindow found, some errors must have occurred!!");
762 /* get offline calibration from OCDB */
763 cdbe = GetFromOCDB("Calib", "ParOffline");
765 Log("cannot get \"ParOffline\" entry from OCDB");
768 TObjArray *offlineArray = (TObjArray *)cdbe->GetObject();
769 AliTOFChannelOffline *channelOffline;
771 Log("cannot get \"ParOffline\" object from CDB entry");
774 Log("got \"ParOffline\" object");
776 /* get deltaBC offset from OCDB */
777 cdbe = GetFromOCDB("Calib", "DeltaBCOffset");
779 Log("cannot get \"DeltaBCOffset\" entry from OCDB");
782 AliTOFDeltaBCOffset *deltaBCOffsetObject = (AliTOFDeltaBCOffset *)cdbe->GetObject();
783 if (!deltaBCOffsetObject) {
784 Log("cannot get \"DeltaBCOffset\" object from CDB entry");
787 Int_t deltaBCOffset = deltaBCOffsetObject->GetDeltaBCOffset();
788 Log(Form("got \"DeltaBCOffset\" object: deltaBCOffset=%d (BC bins)", deltaBCOffset));
790 /* get CTP latency from OCDB */
791 cdbe = GetFromOCDB("Calib", "CTPLatency");
793 Log("cannot get \"CTPLatency\" entry from OCDB");
796 AliTOFCTPLatency *ctpLatencyObject = (AliTOFCTPLatency *)cdbe->GetObject();
797 if (!ctpLatencyObject) {
798 Log("cannot get \"CTPLatency\" object from CDB entry");
801 Float_t ctpLatency = ctpLatencyObject->GetCTPLatency();
802 Log(Form("got \"CTPLatency\" object: ctpLatency=%f (ps)", ctpLatency));
804 /* get file sources from FXS */
805 TList *fileList = GetFileSources(kDAQ, "HITS");
806 if (!fileList || fileList->GetEntries() == 0) {
807 Log("cannot get DAQ source file list or empty list");
810 Log(Form("got DAQ source file list: %d files", fileList->GetEntries()));
813 /* create tree chain using file sources */
814 TChain chain("hitTree");
815 for (Int_t ifile = 0; ifile < fileList->GetEntries(); ifile++) {
816 TObjString *str = (TObjString *)fileList->At(ifile);
817 TString filename = GetFile(kDAQ, "HITS", str->GetName());
819 Log(Form("file added to input chain: source=%s, filename=%s", str->String().Data(), filename.Data()));
821 Int_t nhits = chain.GetEntries();
822 Log(Form("input chain ready: %d hits", nhits));
824 /* setup input chain */
825 AliTOFHitField *hit = new AliTOFHitField();
826 chain.SetBranchAddress("hit", &hit);
828 /* create calib histo and geometry */
829 AliTOFcalibHisto calibHisto;
830 calibHisto.LoadCalibHisto();
831 AliTOFGeometry tofGeo;
834 Float_t c = TMath::C() * 1.e2 / 1.e12; /* cm/ps */
835 Float_t c_1 = 1. / c;
837 Int_t index, timebin, totbin, deltaBC, l0l1latency, det[5];
838 Float_t timeps, totns, corrps, length, timeexp, timezero, pos[3], latencyWindow;
841 TH1F *hT0Fill = new TH1F("hT0Fill", "T0 fill;t - t_{exp}^{(c)} (ps);", 2000, -24400., 24400.);
844 for (Int_t ihit = 0; ihit < nhits; ihit++) {
847 chain.GetEntry(ihit);
850 index = hit->GetIndex();
851 timebin = hit->GetTimeBin();
852 totbin = hit->GetTOTBin();
853 deltaBC = hit->GetDeltaBC();
854 l0l1latency = hit->GetL0L1Latency();
855 latencyWindow = fLatencyWindow[index] * 1.e3;
857 /* convert time in ps and tot in ns */
858 timeps = timebin * AliTOFGeometry::TdcBinWidth();
859 totns = totbin * AliTOFGeometry::ToTBinWidth() * 1.e-3;
860 /* get calibration correction in ps */
863 channelOffline = (AliTOFChannelOffline *)offlineArray->At(index);
864 if (totns < AliTOFGeometry::SlewTOTMin()) totns = AliTOFGeometry::SlewTOTMin();
865 if (totns > AliTOFGeometry::SlewTOTMax()) totns = AliTOFGeometry::SlewTOTMax();
867 for (Int_t ipar = 0; ipar < 6; ipar++) corrps += channelOffline->GetSlewPar(ipar) * TMath::Power(totns, ipar);
869 /* perform time correction */
870 // timeps = timeps + (deltaBC - deltaBCOffset) * AliTOFGeometry::BunchCrossingBinWidth() + l0l1latency * AliTOFGeometry::BunchCrossingBinWidth() + ctpLatency - latencyWindow - corrps; /* deltaBC correction removed for the time being */
871 timeps = timeps + l0l1latency * AliTOFGeometry::BunchCrossingBinWidth() + ctpLatency - latencyWindow - corrps;
872 /* compute length and expected time */
873 tofGeo.GetVolumeIndices(index, det);
874 tofGeo.GetPosPar(det, pos);
876 for (Int_t i = 0; i < 3; i++) length += pos[i] * pos[i];
877 length = TMath::Sqrt(length);
878 timeexp = length * c_1;
879 /* compute time zero */
880 timezero = timeps - timeexp;
883 hT0Fill->Fill(timezero);
886 /* rebin until maximum bin has required minimum entries */
887 Int_t maxBin = hT0Fill->GetMaximumBin();
888 Float_t maxBinContent = hT0Fill->GetBinContent(maxBin);
889 Float_t binWidth = hT0Fill->GetBinWidth(maxBin);
890 while (maxBinContent < 400 && binWidth < 90.) {
892 maxBin = hT0Fill->GetMaximumBin();
893 maxBinContent = hT0Fill->GetBinContent(maxBin);
894 binWidth = hT0Fill->GetBinWidth(maxBin);
896 Float_t maxBinCenter = hT0Fill->GetBinCenter(maxBin);
898 /* rough fit of the edge */
899 TF1 *gaus = (TF1 *)gROOT->GetFunction("gaus");
900 gaus->SetParameter(1, maxBinCenter);
901 Float_t fitMin = maxBinCenter - 1000.; /* fit from 1 ns before max */
902 Float_t fitMax = maxBinCenter + 1000.; /* fit until 1 ns above max */
903 hT0Fill->Fit("gaus", "q0", "", fitMin, fitMax);
904 /* better fit of the edge */
906 for (Int_t istep = 0; istep < 10; istep++) {
907 mean = gaus->GetParameter(1);
908 sigma = gaus->GetParameter(2);
909 fitMin = mean - 3. * sigma;
911 hT0Fill->Fit("gaus", "q0", "", fitMin, fitMax);
914 mean = gaus->GetParameter(1);
915 sigma = gaus->GetParameter(2);
916 Float_t meane = gaus->GetParError(1);
917 Float_t sigmae = gaus->GetParError(2);
918 Log(Form("edge fit: mean = %f +- %f ps", mean, meane));
919 Log(Form("edge fit: sigma = %f +- %f ps", sigma, sigmae));
922 Log("error on mean is large: store default T0-fill value (0 ps)");
926 Log("error on sigma is large: store default TOFreso value (200 ps)");
930 /* create RunParams object */
931 UInt_t timestamp[1] = {0};
932 Float_t t0[1] = {mean};
933 Float_t tofReso[1] = {sigma};
934 Float_t t0Spread[1] = {-1.};
935 AliTOFRunParams *runParamsObject = new AliTOFRunParams(1);
936 runParamsObject->SetTimestamp(timestamp);
937 runParamsObject->SetT0(t0);
938 runParamsObject->SetTOFResolution(tofReso);
939 runParamsObject->SetT0Spread(t0Spread);
941 /* store reference data */
943 AliCDBMetaData metaDataHisto;
944 metaDataHisto.SetBeamPeriod(0);
945 metaDataHisto.SetResponsible("Roberto Preghenella");
946 metaDataHisto.SetComment("online T0-fill histogram");
947 if (!StoreReferenceData("Calib","T0Fill", hT0Fill, &metaDataHisto)) {
948 Log("error while storing reference data");
951 delete runParamsObject;
954 Log("reference data successfully stored");
957 AliCDBMetaData metaData;
958 metaData.SetBeamPeriod(0);
959 metaData.SetResponsible("Roberto Preghenella");
960 metaData.SetComment("online RunParams measurement");
961 if (!Store("Calib", "RunParams", runParamsObject, &metaData, 0, kFALSE)) {
962 Log("error while storing RunParams object");
965 delete runParamsObject;
968 Log("RunParams object successfully stored");
972 delete runParamsObject;
977 //_____________________________________________________________________________
980 AliTOFPreprocessor::ProcessNoiseCalibTrg()
982 // Processing data from DAQ using calibration triggers for noise measurement
984 Log("Processing Noise (calibration trigger)");
986 /* check status and matching window available */
987 if (!fStatus || !fMatchingWindow){
988 AliError("No valid fStatus or fMatchingWindow found, some errors must have occurred!!");
992 Float_t noiseThr = 1000.; // setting default threshold for noise to 1000 Hz
993 // reading config map
994 AliCDBEntry *cdbEntry = GetFromOCDB("Calib","ConfigNoise");
995 if (!cdbEntry) Log(Form("No Configuration entry found in CDB, using default values: NoiseThr = %f",noiseThr));
997 TMap *configMap = (TMap*)cdbEntry->GetObject();
998 if (!configMap) Log(Form("No map found in Config entry in CDB, using default values: NoiseThr = %f", noiseThr));
1000 TObjString *strNoiseThr = (TObjString*)configMap->GetValue("NoiseThr");
1002 TString tmpstr = strNoiseThr->GetString();
1003 noiseThr = tmpstr.Atoi();
1005 else Log(Form("No NoiseThr value found in Map from ConfigNoise entry in CDB, using default value: NoiseThr = %f",noiseThr));
1009 /* get file sources from FXS */
1010 TList *fileList = GetFileSources(kDAQ, "CALIB");
1011 if (!fileList || fileList->GetEntries() == 0) {
1012 Log("cannot get DAQ source file list or empty list");
1015 Log(Form("got DAQ source file list: %d files", fileList->GetEntries()));
1018 /* open input file (only one expected) */
1019 TObjString *str = (TObjString *)fileList->At(0);
1020 TString filename = GetFile(kDAQ, "CALIB", str->GetName());
1021 Log(Form("opening input file: source=%s, filename=%s", str->String().Data(), filename.Data()));
1022 TFile *filein = TFile::Open(filename.Data());
1023 if (!filein || !filein->IsOpen()) {
1024 Log("cannot open input file");
1028 /* get histo from input file */
1029 TH1F *hCalibHit = (TH1F *)filein->Get("hCalibHit");
1031 Log("cannot get \"hCalibHit\" histo");
1035 /* create and set noise rate histo and check rate */
1036 TH1F *hNoiseRate = new TH1F("hNoiseRate", ";index;rate (Hz)", fNChannels, 0., fNChannels);
1037 Float_t rate, rate_err;
1038 for (Int_t ich = 0; ich < fNChannels; ich++) {
1039 /* check channel enabled */
1040 if (fStatus->GetHWStatus(ich) == AliTOFChannelOnlineStatusArray::kTOFHWBad) continue;
1041 /* set noise rate histo */
1042 rate = hCalibHit->GetBinContent(ich + 1);
1043 rate_err = hCalibHit->GetBinError(ich + 1);
1044 rate /= fMatchingWindow[ich] * 1.e-9;
1045 rate_err /= fMatchingWindow[ich] * 1.e-9;
1046 hNoiseRate->SetBinContent(ich + 1, rate);
1047 hNoiseRate->SetBinError(ich + 1, rate_err);
1048 /* check noise rate and set noise flags */
1049 if ((rate - 3. * rate_err) > noiseThr) {
1050 Log(Form("channel %d detected as noisy: rate = (%f +- %f) Hz", ich, rate, rate_err));
1051 if (fStatus->GetNoiseStatus(ich) == AliTOFChannelOnlineStatusArray::kTOFNoiseOk) {
1052 Log(Form("channel %d noise status changed from Ok to Bad", ich));
1053 fStatus->SetNoiseStatus(ich, AliTOFChannelOnlineStatusArray::kTOFNoiseBad);
1054 fIsStatusMapChanged = kTRUE;
1056 else Log(Form("channel %d noise status unchanged", ich));
1058 else if ((rate + 3. * rate_err) < noiseThr) {
1059 if (fStatus->GetNoiseStatus(ich) == AliTOFChannelOnlineStatusArray::kTOFNoiseBad) {
1060 Log(Form("channel %d noise status changed from Bad to Ok", ich));
1061 fStatus->SetNoiseStatus(ich, AliTOFChannelOnlineStatusArray::kTOFNoiseOk);
1062 fIsStatusMapChanged = kTRUE;
1067 /* store reference data */
1069 AliCDBMetaData metaDataHisto;
1070 metaDataHisto.SetBeamPeriod(0);
1071 metaDataHisto.SetResponsible("Roberto Preghenella");
1072 metaDataHisto.SetComment("calibration trigger noise rate histogram");
1073 if (!StoreReferenceData("Calib","CalibNoise", hNoiseRate, &metaDataHisto)) {
1074 Log("error while storing reference data");
1079 Log("reference data successfully stored");
1087 //_____________________________________________________________________________
1090 AliTOFPreprocessor::ProcessReadout()
1092 // Processing data from DAQ to compute reaodut efficiency
1094 Log("Processing Readout");
1096 /* get file sources from FXS */
1097 TList *fileList = GetFileSources(kDAQ, "READOUT");
1098 if (!fileList || fileList->GetEntries() == 0) {
1099 Log("cannot get DAQ source file list or empty list");
1102 Log(Form("got DAQ source file list: %d files", fileList->GetEntries()));
1105 /* open input file (only one expected) */
1106 TObjString *str = (TObjString *)fileList->At(0);
1107 TString filename = GetFile(kDAQ, "READOUT", str->GetName());
1108 Log(Form("opening input file: source=%s, filename=%s", str->String().Data(), filename.Data()));
1109 TFile *filein = TFile::Open(filename.Data());
1110 if (!filein || !filein->IsOpen()) {
1111 Log("cannot open input file");
1115 /* get histo from input file */
1116 TH1F *hChainEfficiency = (TH1F *)filein->Get("hChainEfficiency");
1117 if (!hChainEfficiency) {
1118 Log("cannot get \"hChainEfficiency\" histo");
1122 /* fill channel efficiency histo */
1124 /* temporarly disable warnings */
1125 AliLog::EType_t logLevel = (AliLog::EType_t)AliLog::GetGlobalLogLevel();
1126 AliLog::SetGlobalLogLevel(AliLog::kError);
1128 TH1F *hChannelEfficiency = new TH1F("hChannelEfficiency", "Channel readout efficiency;index;efficiency", fNChannels, 0., fNChannels);
1129 Int_t chainIndex, det[5], dummy, index;
1130 Float_t effi, effi_err;
1131 /* loop over DDLs */
1132 for (Int_t iddl = 0; iddl < 72; iddl++) {
1133 /* loop over TRMs */
1134 for (Int_t itrm = 0; itrm < 10; itrm++) {
1135 /* loop over chains */
1136 for (Int_t ichain = 0; ichain < 2; ichain++) {
1137 chainIndex = ichain + 2 * itrm + 20 * iddl;
1138 effi = hChainEfficiency->GetBinContent(chainIndex + 1);
1139 effi_err = hChainEfficiency->GetBinError(chainIndex + 1);
1140 /* loop over TDCs */
1141 for (Int_t itdc = 0; itdc < 15; itdc++) {
1142 /* loop over channels */
1143 for (Int_t ichannel = 0; ichannel < 8; ichannel++) {
1145 /* get channel index */
1146 AliTOFRawStream::EquipmentId2VolumeId(iddl, itrm + 3, ichain, itdc, ichannel, det);
1150 /* check valid index */
1151 if (det[0] < 0 || det[0] > 17 ||
1152 det[1] < 0 || det[1] > 5 ||
1153 det[2] < 0 || det[2] > 18 ||
1154 det[3] < 0 || det[3] > 1 ||
1155 det[4] < 0 || det[4] > 47) continue;
1156 index = AliTOFGeometry::GetIndex(det);
1158 /* set channel efficiency */
1159 hChannelEfficiency->SetBinContent(index + 1, effi);
1160 hChannelEfficiency->SetBinError(index + 1, effi_err);
1168 /* re-enable warnings */
1169 AliLog::SetGlobalLogLevel(logLevel);
1171 /* store reference data */
1173 /* setup TOF readout info object */
1174 AliTOFReadoutInfo readoutInfo;
1175 readoutInfo.SetChainEfficiency((TH1F *)filein->Get("hChainEfficiency"));
1176 readoutInfo.SetTRMData((TH1F *)filein->Get("hTRMData"));
1177 readoutInfo.SetTRMEmptyEvent((TH1F *)filein->Get("hTRMEmptyEvent"));
1178 readoutInfo.SetTRMBadEventCounter((TH1F *)filein->Get("hTRMBadEventCounter"));
1179 readoutInfo.SetTRMBadCRC((TH1F *)filein->Get("hTRMBadCRC"));
1180 readoutInfo.SetChainData((TH1F *)filein->Get("hChainData"));
1181 readoutInfo.SetChainBadStatus((TH1F *)filein->Get("hChainBadStatus"));
1182 readoutInfo.SetChainBadEventCounter((TH1F *)filein->Get("hChainBadEventCounter"));
1183 readoutInfo.SetTDCError((TH1F *)filein->Get("hTDCError"));
1184 readoutInfo.SetTDCErrorFlags((TH2F *)filein->Get("hTDCErrorFlags"));
1186 AliCDBMetaData metaDataHisto;
1187 metaDataHisto.SetBeamPeriod(0);
1188 metaDataHisto.SetResponsible("Roberto Preghenella");
1189 metaDataHisto.SetComment("readout info data");
1190 if (!StoreReferenceData("Calib","ReadoutInfo", &readoutInfo, &metaDataHisto)) {
1191 Log("error while storing reference data");
1195 Log("reference data successfully stored");
1198 AliCDBMetaData metaData;
1199 metaData.SetBeamPeriod(0);
1200 metaData.SetResponsible("Roberto Preghenella");
1201 metaData.SetComment("online ReadoutEfficiency measurement");
1202 if (!Store("Calib", "ReadoutEfficiency", hChannelEfficiency, &metaData, 0, kFALSE)) {
1203 Log("error while storing ReadoutEfficiency object");
1204 delete hChannelEfficiency;
1208 Log("ReadoutEfficiency object successfully stored");
1210 delete hChannelEfficiency;
1215 //_____________________________________________________________________________
1217 UInt_t AliTOFPreprocessor::ProcessPulserData()
1219 // Processing Pulser Run data for TOF channel status
1221 Log("Processing Pulser");
1224 AliError("No valid fStatus found, some errors must have occurred!!");
1228 TH1::AddDirectory(0);
1230 Bool_t resultPulserRef=kFALSE;
1231 Bool_t resultPulser=kFALSE;
1233 static const Int_t kSize = AliTOFGeometry::NPadXSector()*AliTOFGeometry::NSectors();
1234 TH1S * htofPulser = new TH1S("hTOFpulser","histo with signals on TOF during pulser", kSize,-0.5,kSize-0.5);
1235 for (Int_t ibin =1;ibin<=kSize;ibin++){
1236 htofPulser->SetBinContent(ibin,-1);
1239 // processing pulser
1241 TFile * daqFile=0x0;
1244 //retrieving Pulser data
1245 TList* listPulser = GetFileSources(kDAQ, "PULSER");
1246 if (listPulser !=0x0 && listPulser->GetEntries()!=0)
1248 AliInfo("The following sources produced files with the id PULSER");
1249 listPulser->Print();
1251 for (Int_t jj=0;jj<listPulser->GetEntries();jj++){
1252 Int_t nPulserSource = 0;
1253 TObjString * str = dynamic_cast<TObjString*> (listPulser->At(jj));
1254 AliInfo(Form("found source %s", str->String().Data()));
1255 // file to be stored run per run
1256 TString fileNamePulser = GetFile(kDAQ, "PULSER", str->GetName());
1257 if (fileNamePulser.Length()>0){
1258 // storing refernce data
1259 AliInfo(Form("Got the file %s, now we can process pulser data.", fileNamePulser.Data()));
1260 daqFile = new TFile(fileNamePulser.Data(),"READ");
1261 h1 = (TH1S*) daqFile->Get("hTOFpulser");
1262 for (Int_t ibin=0;ibin<kSize;ibin++){
1263 if ((h1->GetBinContent(ibin+1))!=-1){
1264 if ((htofPulser->GetBinContent(ibin+1))==-1){
1265 htofPulser->SetBinContent(ibin+1,h1->GetBinContent(ibin+1));
1268 Log(Form("Something strange occurred during Pulser run, channel %i already read by another LDC, please check!",ibin));
1273 // elaborating infos
1276 Int_t nreadNotEmpty=0;
1277 for (Int_t ientry=1;ientry<=h1->GetNbinsX();ientry++){
1279 AliDebug(3,Form(" channel %i pulser status before pulser = %i, with global status = %i",ientry,(Int_t)fStatus->GetPulserStatus(ientry),(Int_t)fStatus->GetStatus(ientry)));
1280 /* check whether channel has been read out during current run.
1281 * if the status is bad it means it has not been read out.
1282 * in this case skip channel in order to not affect the mean */
1283 if (fStatus->GetHWStatus(ientry-1) == AliTOFChannelOnlineStatusArray::kTOFHWBad)
1287 if (h1->GetBinContent(ientry)==-1) continue;
1289 if (h1->GetBinContent(ientry)>0) {
1291 AliDebug(2,Form(" channel %i is ok with entry = %f; so far %i channels added ",ientry-1,h1->GetBinContent(ientry),nreadNotEmpty));
1293 mean+=h1->GetBinContent(ientry);
1299 AliDebug(2,Form(" nread = %i , nreadNotEmpty = %i, mean = %f",nread,nreadNotEmpty,mean));
1300 for (Int_t ich =0;ich<fNChannels;ich++){
1301 if (h1->GetBinContent(ich+1)==-1) continue;
1302 AliDebug(3,Form(" channel %i pulser status before pulser = %i",ich,(Int_t)fStatus->GetPulserStatus(ich)));
1304 /* check whether channel has been read out during current run.
1305 * if the status is bad it means it has not been read out.
1306 * in this case skip channel in order to leave its status
1308 if (fStatus->GetHWStatus(ich) == AliTOFChannelOnlineStatusArray::kTOFHWBad)
1311 if (h1->GetBinContent(ich+1)<0.05*mean){
1312 fStatus->SetPulserStatus(ich,AliTOFChannelOnlineStatusArray::kTOFPulserBad); // bad status for pulser
1313 AliDebug(2,Form( " channel %i pulser status after pulser = %i (bad, content = %f), with global status = %i",ich,(Int_t)fStatus->GetPulserStatus(ich),h1->GetBinContent(ich+1),(Int_t)fStatus->GetStatus(ich)));
1316 fStatus->SetPulserStatus(ich,AliTOFChannelOnlineStatusArray::kTOFPulserOk); // good status for pulser
1317 AliDebug(2,Form( " channel %i pulser status after pulser = %i (good), with global status = %i",ich,(Int_t)fStatus->GetPulserStatus(ich),(Int_t)fStatus->GetStatus(ich)));
1322 Log("No channels read!! No action taken, keeping old status");
1331 Log("The input data file from DAQ (pulser) was not found, TOF exiting from Shuttle ");
1339 return 10;//return error code for failure in retrieving Ref Data
1341 AliDebug(2,Form(" Number of channels processed during pulser run from source %i = %i",jj, nPulserSource));
1343 AliDebug(2,Form(" Number of channels processed during pulser run = %i",nPulser));
1348 Log("The input data file list from DAQ (pulser) was not found, TOF exiting from Shuttle ");
1355 return 10;//return error code for failure in retrieving Ref Data
1360 AliCDBMetaData metaData;
1361 metaData.SetBeamPeriod(0);
1362 metaData.SetResponsible("Chiara Zampolli");
1363 metaData.SetComment("This preprocessor fills an AliTOFChannelOnlineStatusArray object after a Pulser run.");
1364 AliInfo("Storing Calibration Data from Pulser Run");
1365 resultPulser = Store("Calib","Status",fStatus, &metaData,0,kTRUE);
1367 Log("Some problems occurred while storing online object resulting from Pulser data processing");
1374 return 11;//return error code for problems in storing Pulser data
1379 AliCDBMetaData metaDataHisto;
1380 metaDataHisto.SetBeamPeriod(0);
1381 metaDataHisto.SetResponsible("Chiara Zampolli");
1383 sprintf(comment,"This preprocessor stores the Ref data from a pulser run.");
1384 metaDataHisto.SetComment(comment);
1385 AliInfo("Storing Reference Data");
1386 resultPulserRef = StoreReferenceData("Calib","PulserData",htofPulser, &metaDataHisto);
1387 if (!resultPulserRef){
1388 Log("some problems occurred::No Reference Data for pulser stored, TOF exiting from Shuttle");
1395 return 9;//return error code for failure in storing Ref Data
1411 //_____________________________________________________________________________
1413 UInt_t AliTOFPreprocessor::ProcessNoiseData()
1416 // Processing Noise Run data for TOF channel status
1418 Log("Processing Noise");
1421 AliError("No valid fStatus found, some errors must have occurred!!");
1425 Float_t noiseThr = 1; // setting default threshold for noise to 1 Hz
1426 // reading config map
1427 AliCDBEntry *cdbEntry = GetFromOCDB("Calib","ConfigNoise");
1429 Log(Form("No Configuration entry found in CDB, using default values: NoiseThr = %f",noiseThr));
1432 TMap *configMap = (TMap*)cdbEntry->GetObject();
1434 Log(Form("No map found in Config entry in CDB, using default values: NoiseThr = %f", noiseThr));
1437 TObjString *strNoiseThr = (TObjString*)configMap->GetValue("NoiseThr");
1439 TString tmpstr = strNoiseThr->GetString();
1440 noiseThr = tmpstr.Atoi();
1443 Log(Form("No NoiseThr value found in Map from ConfigNoise entry in CDB, using default value: NoiseThr = %f",noiseThr));
1451 TH1::AddDirectory(0);
1453 Bool_t resultNoiseRef=kFALSE;
1454 Bool_t resultNoise=kFALSE;
1456 static const Int_t kSize = AliTOFGeometry::NPadXSector()*AliTOFGeometry::NSectors();
1457 TH1F * htofNoise = new TH1F("hTOFnoise","histo with signals on TOF during noise", kSize,-0.5,kSize-0.5);
1458 for (Int_t ibin =1;ibin<=kSize;ibin++){
1459 htofNoise->SetBinContent(ibin,-1);
1464 TFile * daqFile=0x0;
1469 Int_t nNoisyChannels = 0;
1470 Int_t nNotNoisyChannels = 0;
1471 Int_t nChannelsFromDA = 0;
1472 Int_t nMatchingWindowNullNonZero = 0;
1473 Int_t nMatchingWindowNullEqualZero = 0;
1475 // retrieving Noise data
1476 TList* listNoise = GetFileSources(kDAQ, "NOISE");
1477 if (listNoise !=0x0 && listNoise->GetEntries()!=0)
1479 AliInfo("The following sources produced files with the id NOISE");
1481 for (Int_t jj=0;jj<listNoise->GetEntries();jj++){
1482 Int_t nNoiseSource = 0;
1483 TObjString * str = dynamic_cast<TObjString*> (listNoise->At(jj));
1484 AliInfo(Form("found source %s", str->String().Data()));
1485 // file to be stored run per run
1486 TString fileNameNoise = GetFile(kDAQ, "NOISE", str->GetName());
1487 if (fileNameNoise.Length()>0){
1488 // storing reference data
1489 AliInfo(Form("Got the file %s, now we can process noise data.", fileNameNoise.Data()));
1490 daqFile = new TFile(fileNameNoise.Data(),"READ");
1491 h1 = (TH1F*) daqFile->Get("hTOFnoise");
1492 for (Int_t ibin=0;ibin<kSize;ibin++){
1493 if ((h1->GetBinContent(ibin+1))!=-1){
1495 // checking the matching window for current channel
1496 if (fMatchingWindow[ibin] == 0){
1497 Log(Form("Matching window for channel %i null, but the channel was read by the LDC! skipping channel, BUT Please check!",ibin));
1498 if ((h1->GetBinContent(ibin+1))!=0) nMatchingWindowNullNonZero++;
1499 if ((h1->GetBinContent(ibin+1))==0) nMatchingWindowNullEqualZero++;
1502 if ((htofNoise->GetBinContent(ibin+1))==-1){
1503 htofNoise->SetBinContent(ibin+1,h1->GetBinContent(ibin+1)/(fMatchingWindow[ibin]*1.E-9));
1504 if ((h1->GetBinContent(ibin+1))!= 0) AliDebug(2,Form("Channel = %i, Matching window = %i, Content = %f", ibin, fMatchingWindow[ibin], htofNoise->GetBinContent(ibin+1)));
1507 Log(Form("Something strange occurred during Noise run, channel %i already read by another LDC, please check!",ibin));
1512 Log(Form(" Number of channels processed during noise run from source %i = %i",jj, nNoiseSource));
1521 Log("The input data file from DAQ (noise) was not found, TOF exiting from Shuttle ");
1530 if (fMatchingWindow){
1531 delete [] fMatchingWindow;
1532 fMatchingWindow = 0;
1534 return 13;//return error code for failure in retrieving Ref Data
1540 Log("The input data file list from DAQ (noise) was not found, TOF exiting from Shuttle ");
1547 if (fMatchingWindow){
1548 delete [] fMatchingWindow;
1549 fMatchingWindow = 0;
1551 return 13;//return error code for failure in retrieving Ref Data
1554 // elaborating infos to set NOISE status
1555 for (Int_t ich =0;ich<fNChannels;ich++){
1556 if (htofNoise->GetBinContent(ich+1)== -1) continue;
1560 AliDebug(3,Form(" channel %i noise status before noise = %i, with global status = %i",ich,(Int_t)fStatus->GetNoiseStatus(ich),(Int_t)fStatus->GetStatus(ich)));
1561 //AliDebug(2,Form( " channel %i status before noise = %i",ich,(Int_t)fStatus->GetNoiseStatus(ich)));
1563 /* check whether channel has been read out during current run.
1564 * if the status is bad it means it has not been read out.
1565 * in this case skip channel in order to leave its status
1568 if ((fStatus->GetHWStatus(ich)) == AliTOFChannelOnlineStatusArray::kTOFHWBad)
1572 if (htofNoise->GetBinContent(ich+1) >= noiseThr){
1573 fStatus->SetNoiseStatus(ich,AliTOFChannelOnlineStatusArray::kTOFNoiseBad); // bad status for noise
1574 AliDebug(3,Form( " channel %i noise status after noise = %i, with global status = %i",ich,(Int_t)fStatus->GetNoiseStatus(ich),(Int_t)fStatus->GetStatus(ich)));
1578 fStatus->SetNoiseStatus(ich,AliTOFChannelOnlineStatusArray::kTOFNoiseOk); // good status for noise
1579 AliDebug(3,Form(" channel %i noise status after noise = %i, with global status = %i",ich,(Int_t)fStatus->GetNoiseStatus(ich),(Int_t)fStatus->GetStatus(ich)));
1580 nNotNoisyChannels++;
1584 Log(Form(" Number of channels processed by DA during noise run, independetly from TOFFEE = %i",nChannelsFromDA));
1585 Log(Form(" Number of channels processed during noise run (that were ON according to TOFFEE) = %i",nNoise));
1586 Log(Form(" Number of noisy channels found during noise run = %i",nNoisyChannels));
1587 Log(Form(" Number of not noisy channels found during noise run = %i",nNotNoisyChannels));
1588 Log(Form(" Number of channels with matching window NULL (so skipped), but Non Zero content = %i",nMatchingWindowNullNonZero));
1589 Log(Form(" Number of channels with matching window NULL (so skipped), and Zero content = %i",nMatchingWindowNullEqualZero));
1597 AliCDBMetaData metaData;
1598 metaData.SetBeamPeriod(0);
1599 metaData.SetResponsible("Chiara Zampolli");
1600 metaData.SetComment("This preprocessor fills an AliTOFChannelOnlineStatusArray object after a Noise run.");
1601 AliInfo("Storing Calibration Data from Noise Run");
1602 resultNoise = Store("Calib","Status",fStatus, &metaData,0,kTRUE);
1604 Log("Some problems occurred while storing online object resulting from Noise data processing");
1611 if (fMatchingWindow){
1612 delete [] fMatchingWindow;
1613 fMatchingWindow = 0;
1615 return 14;//return error code for problems in storing Noise data
1620 AliCDBMetaData metaDataHisto;
1621 metaDataHisto.SetBeamPeriod(0);
1622 metaDataHisto.SetResponsible("Chiara Zampolli");
1624 sprintf(comment,"This preprocessor stores the Ref data from a noise run. ");
1625 metaDataHisto.SetComment(comment);
1626 AliInfo("Storing Reference Data");
1627 resultNoiseRef = StoreReferenceData("Calib","NoiseData",htofNoise, &metaDataHisto);
1628 if (!resultNoiseRef){
1629 Log("some problems occurred::No Reference Data for noise stored");
1636 if (fMatchingWindow){
1637 delete [] fMatchingWindow;
1638 fMatchingWindow = 0;
1640 return 12;//return error code for failure in storing Ref Data
1652 if (fMatchingWindow){
1653 delete [] fMatchingWindow;
1654 fMatchingWindow = 0;
1659 //_____________________________________________________________________________
1661 UInt_t AliTOFPreprocessor::ProcessFEEData()
1663 // Processing Pulser Run data for TOF channel status
1664 // dummy for the time being
1666 Log("Processing FEE");
1668 //Bool_t updateOCDB = kFALSE;
1669 AliTOFFEEReader feeReader;
1671 TH1C hCurrentFEE("hCurrentFEE","histo with current FEE channel status", fNChannels, 0, fNChannels);
1673 /* load current TOF FEE(dump) from DCS FXS,
1674 * setup TOFFEEdump object */
1676 const char * toffeeFileName = GetFile(kDCS,"TofFeeMap","");
1677 AliInfo(Form("toffee file name = %s", toffeeFileName));
1678 if (toffeeFileName == NULL) {
1681 AliTOFFEEDump feedump;
1682 feedump.ReadFromFile(toffeeFileName);
1684 /* load current TOF FEE(light) config from DCS FXS, parse,
1685 * fill current FEE histogram and set FEE status */
1687 const char * nameFile = GetFile(kDCS,"TofFeeLightMap","");
1688 AliInfo(Form("toffeeLight file name = %s",nameFile));
1689 if (nameFile == NULL) {
1692 feeReader.LoadFEElightConfig(nameFile);
1693 Int_t parseFee = feeReader.ParseFEElightConfig();
1694 AliDebug(2,Form("%i enabled channels found in FEElight configuration",parseFee));
1695 /* load stored TOF FEE from OCDB and compare it with current FEE.
1696 * if stored FEE is different from current FEE set update flag.
1697 * if there is no stored FEE in OCDB set update flag */
1699 fMatchingWindow = new Int_t[fNChannels];
1700 fLatencyWindow = new Int_t[fNChannels];
1702 AliCDBEntry *cdbEntry = GetFromOCDB("Calib","Status");
1704 /* no CDB entry found. set update flag */
1705 Log(" ************ WARNING ************");
1706 Log("No CDB Status entry found, creating a new one!");
1707 Log(" *********************************");
1708 fStatus = new AliTOFChannelOnlineStatusArray(fNChannels);
1709 //updateOCDB = kTRUE;
1710 fIsStatusMapChanged = kTRUE;
1713 if (cdbEntry) cdbEntry->SetOwner(kFALSE);
1714 /* CDB entry OK. loop over channels */
1715 fStatus = (AliTOFChannelOnlineStatusArray*) cdbEntry->GetObject();
1718 /* cehck whether status object has latency window data */
1719 if (!fStatus->HasLatencyWindow()) {
1720 /* create new status object and update OCDB */
1721 Log(" ************ WARNING ************");
1722 Log("CDB Status entry found but has no latency window data, creating a new one!");
1723 Log(" *********************************");
1725 fStatus = new AliTOFChannelOnlineStatusArray(fNChannels);
1726 //updateOCDB = kTRUE;
1727 fIsStatusMapChanged = kTRUE;
1730 for (Int_t iChannel = 0; iChannel < fNChannels; iChannel++){
1731 //AliDebug(2,Form("********** channel %i",iChannel));
1732 /* compare current FEE channel status with stored one
1733 * if different set update flag and break loop */
1734 //AliDebug(2,Form( " channel %i status before FEE = %i",iChannel,(Int_t)fStatus->GetHWStatus(iChannel)));
1735 fMatchingWindow[iChannel] = feeReader.GetMatchingWindow(iChannel);
1736 fLatencyWindow[iChannel] = feeReader.GetLatencyWindow(iChannel);
1737 if (feeReader.IsChannelEnabled(iChannel)) {
1738 hCurrentFEE.SetBinContent(iChannel + 1, 1);
1739 if (fStatus->GetHWStatus(iChannel)!=AliTOFChannelOnlineStatusArray::kTOFHWOk){
1740 //updateOCDB = kTRUE;
1741 fIsStatusMapChanged = kTRUE;
1742 fStatus->SetHWStatus(iChannel,AliTOFChannelOnlineStatusArray::kTOFHWOk);
1743 AliDebug(3,Form( " changed into enabled: channel %i status after FEE = %i",iChannel,(Int_t)fStatus->GetHWStatus(iChannel)));
1745 if (fStatus->GetLatencyWindow(iChannel)!=fLatencyWindow[iChannel]){
1746 //updateOCDB = kTRUE;
1747 fIsStatusMapChanged = kTRUE;
1748 fStatus->SetLatencyWindow(iChannel,fLatencyWindow[iChannel]);
1749 AliDebug(3,Form( " changed latency window: channel %i latency window after FEE = %i",iChannel,fStatus->GetLatencyWindow(iChannel)));
1753 if (fStatus->GetHWStatus(iChannel)!=AliTOFChannelOnlineStatusArray::kTOFHWBad){
1754 //updateOCDB = kTRUE;
1755 fIsStatusMapChanged = kTRUE;
1756 fStatus->SetHWStatus(iChannel,AliTOFChannelOnlineStatusArray::kTOFHWBad);
1757 AliDebug(3,Form( " changed into disabled: channel %i status after FEE = %i",iChannel,(Int_t)fStatus->GetHWStatus(iChannel)));
1763 /* check whether we don't have to store reference data.
1764 * in this case we return without errors. */
1765 if (fStoreRefData) {
1766 /* store reference data */
1767 AliCDBMetaData metaDataHisto;
1768 metaDataHisto.SetBeamPeriod(0);
1769 metaDataHisto.SetResponsible("Roberto Preghenella");
1770 metaDataHisto.SetComment("This preprocessor stores the FEE Ref data of the current run.");
1771 AliInfo("Storing FEE reference data");
1772 /* store FEE reference data */
1773 if (!StoreReferenceData("Calib", "FEEData", &hCurrentFEE, &metaDataHisto)) {
1775 Log("problems while storing FEE reference data");
1780 return 18; /* error return code for problems while storing FEE reference data */
1783 /* store TOF FEE dump reference data */
1784 AliCDBMetaData metaDatadump;
1785 metaDatadump.SetBeamPeriod(0);
1786 metaDatadump.SetResponsible("Roberto Preghenella");
1787 metaDatadump.SetComment("This preprocessor stores the TOF FEE dump Ref data of the current run.");
1788 AliInfo("Storing TOF FEE dump reference data");
1789 /* store FEE reference data */
1790 if (!StoreReferenceData("Calib", "FEEDump", &feedump, &metaDatadump)) {
1792 Log("problems while storing TOF FEE dump reference data");
1793 return 18; /* error return code for problems while storing FEE reference data */
1801 //_____________________________________________________________________________
1803 UInt_t AliTOFPreprocessor::Process(TMap *dcsAliasMap)
1806 // Main AliTOFPreprocessor method called by SHUTTLE
1809 TString runType = GetRunType();
1810 Log(Form("RunType %s",runType.Data()));
1814 /* always process FEE data */
1815 Int_t iresultFEE = ProcessFEEData();
1816 if (iresultFEE != 0)
1819 if (runType == "PULSER") {
1820 Int_t iresultPulser = ProcessPulserData();
1821 return iresultPulser;
1824 if (runType == "NOISE") { // for the time being associating noise runs with pedestal runs; proper run type to be defined
1825 Int_t iresultNoise = ProcessNoiseData();
1826 return iresultNoise;
1829 if (runType == "PHYSICS") {
1830 // Int_t iresultDAQ = ProcessOnlineDelays();
1831 Int_t iresultDAQ = ProcessT0Fill();
1832 Int_t iresultNoiseCalib = ProcessNoiseCalibTrg();
1833 // Int_t iresultReadout = ProcessReadout();
1834 Int_t iresultDCS = ProcessDCSDataPoints(dcsAliasMap);
1835 Int_t iResultHVandLVdps = ProcessHVandLVdps(dcsAliasMap);
1836 return iresultDAQ+iresultNoiseCalib+iresultDCS+iResultHVandLVdps;
1844 //_____________________________________________________________________________
1847 AliTOFPreprocessor::FillWithCosmicCalibration(AliTOFChannelOnlineArray *cal)
1850 * fill with cosmic calibration
1853 Log(" Using cosmic-ray calibration.");
1855 AliTOFcalibHisto calibHisto;
1856 calibHisto.SetFullCorrectionFlag(AliTOFcalibHisto::kTimeSlewingCorr, kFALSE);
1857 Log(Form(" loading calibration histograms from %s", calibHisto.GetCalibHistoFileName()));
1858 Log(Form(" loading calibration parameters from %s", calibHisto.GetCalibParFileName()));
1859 calibHisto.LoadCalibPar();
1861 /* loop over channel index */
1862 for (Int_t iIndex = 0; iIndex < fNChannels; iIndex++) {
1863 cal->SetDelay(iIndex, calibHisto.GetFullCorrection(iIndex));
1868 //_____________________________________________________________________________
1871 AliTOFPreprocessor::FillWithCableLengthMap(AliTOFChannelOnlineArray *cal)
1874 * fill with cosmic calibration
1877 Log(" Using cable-length map.");
1878 AliTOFRawStream tofrs;
1879 Int_t det[5], dummy, index;
1880 Float_t cableTimeShift;
1882 /* temporarly disable warnings */
1883 AliLog::EType_t logLevel = (AliLog::EType_t)AliLog::GetGlobalLogLevel();
1884 AliLog::SetGlobalLogLevel(AliLog::kError);
1886 /* loop over EO indeces */
1887 for (Int_t iddl = 0; iddl < 72; iddl++)
1888 for (Int_t islot = 3; islot <= 12; islot++)
1889 for (Int_t ichain = 0; ichain < 2; ichain++)
1890 for (Int_t itdc = 0; itdc < 15; itdc++)
1891 for (Int_t ichannel = 0; ichannel < 8; ichannel++) {
1894 tofrs.EquipmentId2VolumeId(iddl, islot, ichain, itdc, ichannel, det);
1896 /* swap det[3] and det[4] indeces (needed to obtain correct channel index) */
1901 /* check DO index */
1902 if (det[0] < 0 || det[0] > 17 ||
1903 det[1] < 0 || det[1] > 4 ||
1904 det[2] < 0 || det[2] > 18 ||
1905 det[3] < 0 || det[3] > 1 ||
1906 det[4] < 0 || det[4] > 47)
1909 /* get channel index */
1910 index = AliTOFGeometry::GetIndex(det);
1912 /* get cable time shift */
1913 cableTimeShift = AliTOFCableLengthMap::GetCableTimeShift(iddl, islot, ichain, itdc);
1916 if (index<fNChannels) {
1917 cal->SetDelay(index,cableTimeShift); // delay in ns
1918 AliDebug(2,Form("Setting delay %f (ns) for channel %i",cableTimeShift,index));
1921 } /* loop over EO indeces */
1923 /* re-enable warnings */
1924 AliLog::SetGlobalLogLevel(logLevel);