2 * @brief The Altro class implements the Altro digital Chain in C++
4 * This Class represents a C++ version of the ALTRO. For a complete Documentation of the Altro
5 * Look at : http://ep-ed-alice-tpc.web.cern.ch/ep-ed-alice-tpc/altro_chip.htm\n
6 * Due to the fact that the real ALTRO constantly samples in between the recorded events,
7 * it has the knowledge on what happened in the period. This affects the BSL1, TCF and BSL2 module.
8 * In the BSL1 the ALTRO follows slow baseline drifts e.g. temperature change, the TCF has a infinite
9 * (IIR Filter) memory of "old samples" i.e. a cluster at the start of a readout cycle will be treated
10 * differently, and the BSL2 has a 8 step pipeline. The ALTRO Class can't emulate this behavior,
11 * since the data is not recorded.\n
13 * @author Roland Bramm
14 * @version $LastChangedRevision: 688 $
15 * @date $LastChangedDate: 2005-12-16 14:07:11 +0100 (Fri, 16 Dec 2005) $
17 * \verbinclude Altro/Altro.C.log
21 /////////////////////////////////////////////////////////////////////////////////////////////////////
22 // Class for emulation of the ALTRO chip (Altro digital Chain) in C++ //
23 // Author: Roland Bramm //
25 // NOTE: This class has been modified to be conform with the coding conventions of the //
26 // ALICE Off-line Project. Keywords for setting the mode of BSC1 were modified //
27 // and are shown in the header file ... //
28 // Stefan Rossegger, 8th february 2008 //
29 /////////////////////////////////////////////////////////////////////////////////////////////////////
31 #include <AliTPCAltroEmulator.h>
36 #include <AliRawReader.h>
37 #include <AliRawVEvent.h>
38 #include <AliRawData.h>
39 #include <AliRawVEquipment.h>
40 #include <AliRawEquipmentHeader.h>
41 #include <AliTPCRawStreamV3.h>
45 /** @brief Consturctor of Altro Class
47 * Consturctor of Altro Class, some variables are set.\n
48 * The input Data is altered, so after running the complete emulation you have the
49 * Altro Processed Data in the Channel Pointer.\n
51 * @param timebins an <tt> int </tt> sets the length of the input Data (Channel)
52 * @param Channel an <tt> short* </tt> Pointer to a 1d Short_tArray with the input Data
56 ClassImp(AliTPCAltroEmulator)
58 AliTPCAltroEmulator::AliTPCAltroEmulator(Int_t timebins, short* Channel) :
61 // fChannelIn(Channel),
62 fChannelShort(Channel),
70 fConfiguredAltro(0), // ConfiguredAltro
71 fConfiguredBSL1(0), // ConfiguredBSL1
72 fConfiguredTCF(0), // ConfiguredTCF
73 fConfiguredTCFraw(0), // ConfiguredTCF
74 fConfiguredBSL2(0), // ConfiguredBSL2
75 fConfiguredZSU(0), // ConfiguredZSU
76 fBSL1mode(0), // BSL1mode
77 fBSL1ValuePeDestal(0), // BSL1ValuePeDestal
78 fBSL1PedestalMem(0), // BSL1PedestalMem
79 fBSL1polarity(0), // BSL1polarity
88 fTCFK1Int(0), // K1Int
89 fTCFK2Int(0), // K2Int
90 fTCFK3Int(0), // K3Int
91 fTCFL1Int(0), // L1Int
92 fTCFL2Int(0), // L2Int
93 fTCFL3Int(0), // L3Int
95 fBSL2HighThreshold(0), // BSL2HighThreshold
96 fBSL2LowThreshold(0), // BSL2LowThreshold
97 fBSL2Offset(0), // BSL2Offset
98 fBSL2Presamples(0), // BSL2Presamples(0),
99 fBSL2Postsamples(0), // BSL2Postsamples
101 fZSUThreshold(0), // ZSUThreshold
103 fZSUMinSamplesaboveThreshold(0), // ZSUMinSamplesaboveThreshold
104 fZSUPresamples(0), // ZSUPresamples
105 fZSUPostsamples(0), // ZSUPostsamples
107 fReader(0), // for Altro Emulation on Raw Reader
110 fDDLFolderName("./"),
111 fOutputDateFileName("./tmpRaw.date"),
112 fOutputRootFileName("./tmpRaw.root"),
120 // Constructor of Altro Class
123 fADCkeep = new Short_t[1024];
125 fTCFK1IntROC[0]=0; fTCFK1IntROC[1]=0; // dummy defaults
126 fTCFK2IntROC[0]=0; fTCFK2IntROC[1]=0; // dummy defaults
127 fTCFK3IntROC[0]=0; fTCFK3IntROC[1]=0; // dummy defaults
128 fTCFL1IntROC[0]=0; fTCFL1IntROC[1]=0; // dummy defaults
129 fTCFL2IntROC[0]=0; fTCFL2IntROC[1]=0; // dummy defaults
130 fTCFL3IntROC[0]=0; fTCFL3IntROC[1]=0; // dummy defaults
136 /** @brief Destructor of Altro Class
138 * Destructor of Altro Class\n
140 AliTPCAltroEmulator::~AliTPCAltroEmulator() {
142 // Destructor of Altro Class
145 // if(fConfiguredZSU == 1)
158 /** @brief Configures which modules of the Altro should be on.
160 * Configures which modules of the Altro should be on. Each of the modules
161 * which are configured to be on, have to be configured later before running
164 * @param ONBaselineCorrection1 an <tt> Int_t </tt> Switch (0,1) to turn on the Base Line Correction 1 (BSL1) Module
165 * @param ONTailcancellation an <tt> Int_t </tt> Switch (0,1) to turn on the Tail Cancellation Filter (TCF) Module
166 * @param ONBaselineCorrection2 an <tt> Int_t </tt> Switch (0,1) to turn on the Moving Average Filter (BSL2) Module
167 * @param ONClipping an <tt> Int_t </tt> Switch (0,1) to turn on the Clipping Module. This is not possible in the real Altro, there it is always on.
168 * @param ONZerosuppression an <tt> Int_t </tt> Switch (0,1) to turn on the Zero Suppression (ZSU) Module
169 * @param ONDataFormatting an <tt> Int_t </tt> Switch (0,1) to turn on the Data Formatting on (not implemented)
171 void AliTPCAltroEmulator::ConfigAltro(Int_t ONBaselineCorrection1, Int_t ONTailcancellation, Int_t ONBaselineCorrection2, Int_t ONClipping, Int_t ONZerosuppression, Int_t ONDataFormatting){
173 // Configures which modules of the Altro should be on
175 fOnBSL1 = InRange(ONBaselineCorrection1,0,1,"AliTPCAltroEmulator::ConfigAltro","ONBaselineCorrection1");
176 fOnTCF = InRange(ONTailcancellation,0,1,"AliTPCAltroEmulator::ConfigAltro","ONTailcancellation");
177 fOnBSL2 = InRange(ONBaselineCorrection2,0,1,"AliTPCAltroEmulator::ConfigAltro","ONBaselineCorrection2");
178 fOnClip = InRange(ONClipping,0,1,"AliTPCAltroEmulator::ConfigAltro","ONClipping");
179 fOnZSU = InRange(ONZerosuppression,0,1,"AliTPCAltroEmulator::ConfigAltro","ONZerosuppression");
180 fConfiguredAltro = 1;
181 if (!fConfiguredAltro) { //dummy code to avoid warning
182 printf("%d\n",ONDataFormatting); // does not have to be checked
186 /** @brief Configures the Base Line Correction 1 (BSL1) Module
188 * Configures the Base Line Correction 1 (BSL1) Module. You dont have to build a proper pedestalMemory
189 * array, a pointer of the correct type is enough, of course you are not allowed to use Basline
190 * Correction Modes which need then the array ...\n
191 * All configurable values are "Range checked" and if out of the Range set to the nearest extreme.
192 * So the Emulation will work, but the result is maybe not the expected one.
194 * @param mode an <tt> Int_t </tt> sets the mode of the Baseline Correction. See the Altro manual for a description
195 * @param ValuePeDestal an <tt> Int_t </tt> this is the baseline of the Channel.
196 * @param PedestalMem an <tt> *Int_t </tt> Pointer to a 1d Short_t Array with the pedestal memory Data
197 * @param polarity an <tt> Int_t </tt> Switch (0,1) for the polarity
199 void AliTPCAltroEmulator::ConfigBaselineCorrection1(Int_t mode, Int_t ValuePeDestal, Int_t *PedestalMem, Int_t polarity){
201 // Configures the Base Line Correction 1 (BSL1) Module
203 fBSL1mode = InRange(mode,0,16,"AliTPCAltroEmulator::ConfigBaselineCorrection1","mode");
204 fBSL1ValuePeDestal = InRange(ValuePeDestal,0,1023,"AliTPCAltroEmulator::BaselineCorrection1","ValuePeDestal");
205 fBSL1PedestalMem = PedestalMem;
206 fBSL1polarity = InRange(polarity,0,1,"AliTPCAltroEmulator::BaselineCorrection1","polarity");
210 /** @brief Configures the Tail Cancellation Filter (TCF) Module
212 * Configures the Tail Cancellation Filter (TCF) Module. You have to set the coefficients in the
214 * To convert from Int_t to Float_t use (int)*(pow(2,-16)-1)
215 * To convert from Float_t to Int_t usw (Float_t)*(pow(2,16)-1)
216 * All configurable values are "Range checked" and if out of the Range set to the nearest extreme.
217 * So the Emulation will work, but the result is maybe not the expected one.
219 * @param K1 an <tt> Int_t </tt> sets the K1 coeeficient of the TCF
220 * @param K2 an <tt> Int_t </tt> sets the K2 coeeficient of the TCF
221 * @param K3 an <tt> Int_t </tt> sets the K3 coeeficient of the TCF
222 * @param L1 an <tt> Int_t </tt> sets the L1 coeeficient of the TCF
223 * @param L2 an <tt> Int_t </tt> sets the L2 coeeficient of the TCF
224 * @param L3 an <tt> Int_t </tt> sets the L3 coeeficient of the TCF
226 void AliTPCAltroEmulator::ConfigTailCancellationFilter(Int_t K1, Int_t K2, Int_t K3, Int_t L1, Int_t L2, Int_t L3){
228 // Configures the Tail Cancellation Filter (TCF) Module
230 // conf from Int_t to fp: (int)*(pow(2,-16)-1)
231 // backway: (Float_t)*(pow(2,16)-1)
232 fTCFK1Int = InRange(K1,0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","K1");
233 fTCFK2Int = InRange(K2,0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","K2");
234 fTCFK3Int = InRange(K3,0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","K3");
236 fTCFL1Int = InRange(L1,0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","L1");
237 fTCFL2Int = InRange(L2,0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","L2");
238 fTCFL3Int = InRange(L3,0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","L3");
241 void AliTPCAltroEmulator::ConfigTailCancellationFilterForRAWfiles(const Int_t *K1, const Int_t *K2, const Int_t *K3,
242 const Int_t *L1, const Int_t *L2, const Int_t *L3){
244 // Configures the Tail Cancellation Filter (TCF) Module - Different settings for IROC and OROC
246 // conf from Int_t to fp: (int)*(pow(2,-16)-1)
247 // backway: (Float_t)*(pow(2,16)-1)
250 fTCFK1IntROC[0] = InRange(K1[0],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","K1[0]");
251 fTCFK2IntROC[0] = InRange(K2[0],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","K2[0]");
252 fTCFK3IntROC[0] = InRange(K3[0],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","K3[0]");
253 fTCFL1IntROC[0] = InRange(L1[0],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","L1[0]");
254 fTCFL2IntROC[0] = InRange(L2[0],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","L2[0]");
255 fTCFL3IntROC[0] = InRange(L3[0],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","L3[0]");
257 fTCFK1IntROC[1] = InRange(K1[1],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","K1[1]");
258 fTCFK2IntROC[1] = InRange(K2[1],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","K2[1]");
259 fTCFK3IntROC[1] = InRange(K3[1],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","K3[1]");
260 fTCFL1IntROC[1] = InRange(L1[1],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","L1[1]");
261 fTCFL2IntROC[1] = InRange(L2[1],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","L2[1]");
262 fTCFL3IntROC[1] = InRange(L3[1],0,65535,"AliTPCAltroEmulator::ConfigTailCancellationFilter","L3[1]");
265 fConfiguredTCFraw = 1;
269 /** @brief Configures the Moving Average Filter (BSL2) Module
271 * Configures the Moving Average Filter (BSL2) Module.
272 * All configurable values are "Range checked" and if out of the Range set to the nearest extreme.
273 * So the Emulation will work, but the result is maybe not the expected one.
275 * @param HighThreshold an <tt> Int_t </tt> sets the high Threshold
276 * @param LowThreshold an <tt> Int_t </tt> sets the low Theshold
277 * @param Offset an <tt> Int_t </tt> sets the the offset which is added to the Signal
278 * @param Presamples an <tt> Int_t </tt> sets the number of pre samples excluded from the moving average caclulation
279 * @param Postsamples an <tt> Int_t </tt> sets the number of post samples excluded from the moving average caclulation
281 void AliTPCAltroEmulator::ConfigBaselineCorrection2(Int_t HighThreshold, Int_t LowThreshold, Int_t Offset, Int_t Presamples, Int_t Postsamples){
283 // Configures the Moving Average Filter (BSL2) Module
285 fBSL2HighThreshold = InRange(HighThreshold,0,1023,"AliTPCAltroEmulator::ConfigBaselineCorrection2","HighThreshold");
286 fBSL2LowThreshold = InRange(LowThreshold,0,1023,"AliTPCAltroEmulator::ConfigBaselineCorrection2","LowThreshold");
287 fBSL2Offset = InRange(Offset,0,1023,"AliTPCAltroEmulator::ConfigBaselineCorrection2","Offset");
288 fBSL2Presamples = InRange(Presamples,0,3,"AliTPCAltroEmulator::ConfigBaselineCorrection2","Presamples");
289 fBSL2Postsamples = InRange(Postsamples,0,15,"AliTPCAltroEmulator::ConfigBaselineCorrection2","Postsamples");
293 /** @brief Configures the Zero Suppression Module (ZSU)
295 * Configures the Zero Suppression Module (ZSU).
296 * All configurable values are "Range checked" and if out of the Range set to the nearest extreme.
297 * So the Emulation will work, but the result is maybe not the expected one.
299 * @param Threshold an <tt> Int_t </tt> sets the Threshold
300 * @param MinSamplesaboveThreshold an <tt> Int_t </tt> sets the minimum number of samples which have to be greater than the threshold
301 * @param Presamples an <tt> Int_t </tt> sets the number of pre samples which are kept
302 * @param Postsamples an <tt> Int_t </tt> sets the number of post samples which are kept
304 void AliTPCAltroEmulator::ConfigZerosuppression(Int_t Threshold, Int_t MinSamplesaboveThreshold, Int_t Presamples, Int_t Postsamples){
306 // Configures the Zero Suppression Module (ZSU)
308 fZSUThreshold = InRange(Threshold,0,1023,"AliTPCAltroEmulator::BaselineCorrection1","Threshold");
309 fZSUMinSamplesaboveThreshold = InRange(MinSamplesaboveThreshold,1,3,"AliTPCAltroEmulator::BaselineCorrection1","MinSamplesaboveThreshold");
310 fZSUPresamples = InRange(Presamples,0,3,"AliTPCAltroEmulator::BaselineCorrection1","Presamples");
311 fZSUPostsamples = InRange(Postsamples,0,7,"AliTPCAltroEmulator::BaselineCorrection1","Postsamples");
313 for(Int_t i = 0; i < ftimebins; i++){
319 /** @brief Prints the set Parameters, if module is configured
321 * Prints the set Parameters, if module is configured.
323 void AliTPCAltroEmulator::PrintParameters(){
325 // Prints the set Parameters, if module is configured
327 cout << "+-------------------------------------------+" << endl;
328 cout << "| Configured Parameters of the Altro Module |" << endl;
329 cout << "+-------------------------------------------+" << endl << endl;
331 cout << "Parameters set in the Altro Modules:" << endl << endl;
332 cout << "ONBaselineCorrection1: " << fOnBSL1 << endl;
333 cout << "ONTailcancellation : " << fOnTCF << endl;
334 cout << "ONBaselineCorrection2: " << fOnBSL2 << endl;
335 cout << "ONClipping : " << fOnClip << endl;
336 cout << "ONZerosuppression : " << fOnZSU << endl << endl << endl;
337 if(fConfiguredBSL1 == 1){
338 cout << "Parameters set in the BSL1 (Baseline Correction 1) Module:" << endl << endl;
339 cout << "mode : " << fBSL1mode << endl;
340 cout << "ValuePeDestal : " << fBSL1ValuePeDestal << endl;
341 cout << "polarity : " << fBSL1ValuePeDestal << endl << endl << endl;
343 cout << "BSL1 (Baseline Correction 1) Module not configured!" << endl << endl << endl;
345 if(fConfiguredTCF == 1){
346 cout << "Parameters set in the TCF (TailCancellation Filter) Module:" << endl << endl;
347 cout << "K1 (int|Float_t) : " << fTCFK1Int << " | " << fTCFK1Int/(Float_t)((1<<16)-1) << endl;
348 cout << "K2 (int|Float_t) : " << fTCFK2Int << " | " << fTCFK2Int/(Float_t)((1<<16)-1) << endl;
349 cout << "K3 (int|Float_t) : " << fTCFK3Int << " | " << fTCFK3Int/(Float_t)((1<<16)-1) << endl;
350 cout << "L1 (int|Float_t) : " << fTCFL1Int << " | " << fTCFL1Int/(Float_t)((1<<16)-1) << endl;
351 cout << "L2 (int|Float_t) : " << fTCFL2Int << " | " << fTCFL2Int/(Float_t)((1<<16)-1) << endl;
352 cout << "L3 (int|Float_t) : " << fTCFL3Int << " | " << fTCFL3Int/(Float_t)((1<<16)-1) << endl << endl << endl;
354 cout << "TCF (TailCancellation Filter) Module not configured!" << endl << endl << endl;
356 if(fConfiguredBSL2 == 1){
357 cout << "Parameters set in the BSL2 (Baseline Correction 2) Module:" << endl << endl;
358 cout << "HighThreshold : " << fBSL2HighThreshold << endl;
359 cout << "LowThreshold : " << fBSL2LowThreshold << endl;
360 cout << "Offset : " << fBSL2Offset << endl;
361 cout << "Presamples : " << fBSL2Presamples << endl;
362 cout << "Postsamples : " << fBSL2Postsamples << endl << endl << endl;
364 cout << "BSL2 (Baseline Correction 2) Module not configured!" << endl << endl << endl;
366 if(fConfiguredZSU == 1){
367 cout << "Parameters set in the ZSU (Zero Suppression Unit) Module:" << endl << endl;
368 cout << "Threshold : " << fZSUThreshold << endl;
369 cout << "MinSampaboveThreshold: " << fZSUMinSamplesaboveThreshold << endl;
370 cout << "Presamples : " << fZSUPresamples << endl;
371 cout << "Postsamples : " << fZSUPostsamples << endl << endl << endl;
373 cout << "ZSU (Zero Suppression Unit) Module not configured!" << endl << endl << endl;
378 void AliTPCAltroEmulator::SetChannelData(Int_t timebins, Short_t* channelData) {
380 // Set channel data, for example a new channel
383 ftimebins = timebins;
384 fChannelShort = channelData;
389 /** @brief Runs the emulation of all configured Modules.
391 * Runs the emulation of all configured Modules. This changes then the content of the
394 void AliTPCAltroEmulator::RunEmulation(Int_t roc){
396 // Runs the emulation of all configured Modules.
399 if (!fChannelShort) {
400 printf("ERROR cant run Altro Emulation: Channel input not set.\nUse for example: SetChannelData(Int_t timebins, Short_t* Channel)\n");
404 //cout << "AliTPCAltroEmulator::RunEmulation | start" << endl;
405 if(fConfiguredAltro == 0){
406 cout << "ERROR cant run Altro Emulation because not configured" << endl;
410 //cout << "AliTPCAltroEmulator::RunEmulation | start BSL1 on: " << fOnBSL1 << " configures: " << fConfiguredBSL1 << endl;
412 if(fConfiguredBSL1 == 1){
413 BaselineCorrection1(fBSL1mode, fBSL1ValuePeDestal, fBSL1PedestalMem, fBSL1polarity);
415 cout << "ERROR cant run Baseline Correction 1 because not configured" << endl;
420 //cout << "AliTPCAltroEmulator::RunEmulation | start TCF on: " << fOnTCF << " configures: " << fConfiguredTCF << endl;
422 if (roc==-1) { // use one set of TCF params
423 if(fConfiguredTCF == 1){
424 TailCancellationFilterFixedPoint(fTCFK1Int, fTCFK2Int, fTCFK3Int, fTCFL1Int, fTCFL2Int, fTCFL3Int);
426 cout << "ERROR cant run Tail Cancellation Filter because not configured" << endl;
429 } else { // use different TCF params for IROC and OROC
430 if(fConfiguredTCFraw == 1){
432 TailCancellationFilterFixedPoint(fTCFK1IntROC[0], fTCFK2IntROC[0], fTCFK3IntROC[0],
433 fTCFL1IntROC[0], fTCFL2IntROC[0], fTCFL3IntROC[0]);
434 else if (roc==1) // OROC
435 TailCancellationFilterFixedPoint(fTCFK1IntROC[1], fTCFK2IntROC[1], fTCFK3IntROC[1],
436 fTCFL1IntROC[1], fTCFL2IntROC[1], fTCFL3IntROC[1]);
438 cout << "ERROR cant run Tail Cancellation Filter because TCF settings for ROC not found" << endl;
440 cout << "ERROR cant run Tail Cancellation Filter because not configured (for RAW data files!)" << endl;
447 //cout << "AliTPCAltroEmulator::RunEmulation | start BSL2 on: " << fOnBSL2 << " configures: " << fConfiguredBSL2 << endl;
449 if(fConfiguredBSL2 == 1){
450 BaselineCorrection2RTL(fBSL2HighThreshold, fBSL2LowThreshold, fBSL2Offset, fBSL2Presamples, fBSL2Postsamples);
452 cout << "ERROR cant run Baseline Correction 2 because not configured" << endl;
456 //cout << "AliTPCAltroEmulator::RunEmulation | start CLIP on: " << fOnClip << endl;
460 //cout << "AliTPCAltroEmulator::RunEmulation | start ZSU on: " << fOnZSU << " configures: " << fConfiguredZSU << endl;
462 if(fConfiguredZSU == 1){
463 Zerosuppression(fZSUThreshold,fZSUMinSamplesaboveThreshold,fZSUPresamples,fZSUPostsamples);
465 cout << "ERROR cant run Zero Suppression Unit because not configured" << endl;
474 void AliTPCAltroEmulator::BaselineCorrection1(Int_t mode, Int_t ValuePeDestal, Int_t *PedestalMem, Int_t polarity){
476 // BaselineCorrection1
480 Int_t fixedPeDestal = 0;
482 // take first and last bins to calculate a mean pedestal value
484 Int_t meanPeDestal = 0;
485 if (mode == kDINxMPD && ftimebins>=6) {
486 for(Int_t i = 0; i < window; i++) {
487 meanPeDestal += fChannelShort[i];
488 meanPeDestal += fChannelShort[ftimebins-1-i];
490 meanPeDestal /= (window*2);
494 for(Int_t i = 0; i < ftimebins; i++){
495 fChannelShort[i] = 1023 - fChannelShort[i];
501 for(Int_t i = 0; i < ftimebins; i++)
502 fChannelShort[i] = fChannelShort[i] - fixedPeDestal;
505 for(Int_t i = 0; i < ftimebins; i++)
506 fChannelShort[i] = fChannelShort[i] - PedestalMem[i];
509 for(Int_t i = 0; i < ftimebins; i++)
510 fChannelShort[i] = fChannelShort[i] - PedestalMem[ fChannelShort[i] ];
513 for(Int_t i = 0; i < ftimebins; i++)
514 fChannelShort[i] = fChannelShort[i] - PedestalMem[ fChannelShort[i] - ValuePeDestal];
517 for(Int_t i = 0; i < ftimebins; i++)
518 fChannelShort[i] = fChannelShort[i] - ValuePeDestal - fixedPeDestal;
521 for(Int_t i = 0; i < ftimebins; i++)
522 fChannelShort[i] = fChannelShort[i] - ValuePeDestal - PedestalMem[i];
525 for(Int_t i = 0; i < ftimebins; i++)
526 fChannelShort[i] = fChannelShort[i] - ValuePeDestal - PedestalMem[ fChannelShort[i] ];
528 case kDINxVPDxFDINxVPD:
529 for(Int_t i = 0; i < ftimebins; i++)
530 fChannelShort[i] = fChannelShort[i] - ValuePeDestal - PedestalMem[ fChannelShort[i] - ValuePeDestal ];
533 for(Int_t i = 0; i < ftimebins; i++)
534 fChannelShort[i] = PedestalMem[ fChannelShort[i] ] - fixedPeDestal;
537 for(Int_t i = 0; i < ftimebins; i++)
538 fChannelShort[i] = PedestalMem[ fChannelShort[i] - ValuePeDestal ] - fixedPeDestal;
541 for(Int_t i = 0; i < ftimebins; i++)
542 fChannelShort[i] = PedestalMem[i] - fixedPeDestal;
545 for(Int_t i = 0; i < ftimebins; i++)
546 fChannelShort[i] = fChannelShort[i] - meanPeDestal;
551 Int_t AliTPCAltroEmulator::Multiply36(Int_t P, Int_t N){
553 // multiply function to emulate the 36 bit fixed point multiplication of the Altro.
558 temp = (long long)P*(long long)N;
559 vAX = (( Mask(temp,35,18) + ((long long)(-P)<<18) ) + Mask(temp,17,0));
560 if ( Maskandshift(N,17,17) == 1){
561 retval = ((Maskandshift(vAX,35,35)<<17) + Maskandshift(vAX,32,16));
563 retval = Maskandshift(temp,32,16);
567 long long AliTPCAltroEmulator::Mask(long long in, Int_t left, Int_t right){
573 long long length = abs(left - right)+1;
574 pattern = ((1<<length)-1)<<right;
579 long long AliTPCAltroEmulator::Maskandshift(long long in, Int_t left, Int_t right){
585 long long length = abs(left - right)+1;
586 pattern = ((1<<length)-1);
587 retval = (in>>right)&pattern;
591 void AliTPCAltroEmulator::TailCancellationFilterFixedPoint(Int_t K1, Int_t K2, Int_t K3, Int_t L1, Int_t L2, Int_t L3){
593 // TailCancellationFilterFixedPoint
595 Int_t c1n = 0, c2n = 0, c3n = 0;
596 Int_t c1o = 0, c2o = 0, c3o = 0;
597 Int_t d1 = 0, d2 = 0;
602 // printf("%5d %5d %5d %5d %5d %5d\n",K1,K2,K3,L1,L2,L3);
604 for(Int_t i = 0; i < ftimebins; i++){
605 din = fChannelShort[i];
608 c1n = Mask( (Mask(din,17,0) + Multiply36(K1,Mask(c1o,17,0)) ) ,17,0);
609 d1 = Mask( (Mask(c1n,17,0) - Multiply36(L1,Mask(c1o,17,0)) ) ,17,0);
610 //d1 = Mask( (Mask(c1n,17,0) + Mask(~Multiply36(L1,Mask(c1o,17,0))+1,17,0) ) ,17,0);
612 c2n = Mask( (Mask(d1 ,17,0) + Multiply36(K2,Mask(c2o,17,0)) ) ,17,0);
613 d2 = Mask( (Mask(c2n,17,0) - Multiply36(L2,Mask(c2o,17,0)) ) ,17,0);
614 //d2 = Mask( (Mask(c2n,17,0) + Mask(~Multiply36(L2,Mask(c2o,17,0))+1,17,0) ) ,17,0);
616 c3n = Mask( (Mask(d2 ,17,0) + Multiply36(K3,Mask(c3o,17,0)) ) ,17,0);
617 dout = Mask( (Mask(c3n,17,0) - Multiply36(L3,Mask(c3o,17,0)) ) ,17,0);
618 //dout = Mask( (Mask(c3n,17,0) + Mask(~Multiply36(L3,Mask(c3o,17,0))+1,17,0) ) ,17,0);
620 if( (Maskandshift(dout,2,2) == 1) || (Maskandshift(dout,1,1) == 1)){
626 dout = ((dout>>3)<<1) + bit;
627 if(Maskandshift(dout,15,15) == 1){
628 //is needed to get the correct coding when getting negative results
629 dout = -Mask((-Mask(dout,9,0)),9,0);
631 dout = Mask(dout,9,0);
634 fChannelShort[i] = (short) dout;
641 void AliTPCAltroEmulator::BaselineCorrection2RTL(Int_t HighThreshold, Int_t LowThreshold, Int_t Offset, Int_t Presamples, Int_t Postsamples){
643 // BaselineCorrection2RTL
646 //cout << "Altro::BaselineCorrection2RTL | HighThreshold: " << HighThreshold << " LowThreshold: " << LowThreshold << " Offset: " << Offset << " Presamples: " << Presamples << " Postsamples: " << Postsamples << endl;
647 //more or less direct "translation" of the hdl code.
651 Int_t edges[6]; // = Postsamples*4 + Presamples;
652 Int_t offset = Offset;
653 Int_t thrlo = LowThreshold;//called thr_mau[19] ...
654 Int_t thrhi = HighThreshold;
657 Int_t fOld[4]; //flag pipe
658 Int_t fNew[4]; //flag pipe
659 Int_t dOld[4]; //data pipe
660 Int_t dNew[4]; //data pipe
663 Int_t pstscnt; // Counter for Postsamples
664 Int_t zOld[9]; // Filter stages
665 Int_t zNew[9]; // Filter stages
666 Int_t zxOld; //Accumulator stage
667 Int_t zxNew; //Accumulator stage
668 Int_t valcntOld; //Valid sample counter
669 Int_t valcntNew = 0; //Valid sample counter
671 Int_t valid; //Valid flag
672 Int_t fx; //postsample flag
673 //Int_t s07; // differentiator result
674 Int_t s8; // Acc + Diff result
676 //Int_t bsth; //baseline threshold
677 //Int_t din_p; //Data input strictly positive
679 //Int_t dx_bsls; // dx -bsl
680 //Int_t dx_clip; // dxbsl clipped
684 for(Int_t i = 0; i < 9 ; i++)
686 for(Int_t i = 0; i < 4 ; i++){
695 for(Int_t i = 0; i < 2 ; i++){
696 edges[i] = (Presamples&(1<<i))>>i;
698 for(Int_t i = 0; i < 4 ; i++){
699 edges[(3-i)+2] = (Postsamples&(1<<i))>>i;
702 for(Int_t i = 0; i < 6 ; i++)
703 cout << edges[i] << ":";
704 cout << " Presamples: " << Presamples << " Postsamples: " << Postsamples << endl;*/
707 //cout << "AliTPCAltroEmulator::BaselineCorrection2_RTL | starting Loop" << endl;
708 for(Int_t timebin = -12; timebin < ftimebins+10; timebin++){
709 //cout << "AliTPCAltroEmulator::BaselineCorrection2_RTL | in Loop timebin: " << timebin << endl;
710 din = GetElement(fChannelShort,timebin);
712 s8 = zxOld + (zOld[8] - zOld[0]);
719 //assign flag = (din_p > thrhi) | (thrlo > din_p); // Signal samples between thresholds
720 if( (din <= (bsl + thrhi)) && (din >= (bsl - thrlo)) )
737 if( (fOld[3] == 1) || ( (flag == 1) && ( (edges[0] == 1) || (edges[1] == 1) ) ) ) //f[2] = f[3] | (flag&(edges[0]|edges[1]));
742 if( (fOld[2] == 1) || ( (edges[1] == 1) && (flag == 1) ) ) // f[1] = f[2] | (edges[1] & flag);
747 if( ( (fOld[1] == 1) || ( (flag == 1) && (edges[0] == 1) && (edges[1] == 1) ) || (fx==1) ) && (valid==1) ) // f[0] = (f[1] | (edges[1] & edges[0] & flag) | fx) & valid;
753 for(Int_t i = 0; i < 3; i++)
757 if( (fOld[1]==1) && (fOld[2]==0) )
758 pstscnt = Postsamples;
764 valcntNew = ++valcntOld;
767 for(Int_t i = 0; i < 8; i++)
772 for(Int_t i = 0; i < 9; i++)
775 dout = dxOld - (bsl - offset);
779 SetElement(fChannelShort,timebin-5,(short)dout);
781 for(Int_t i = 0; i < 9 ; i++)
784 for(Int_t i = 0; i < 4 ; i++){
789 valcntOld = valcntNew;
793 void AliTPCAltroEmulator::Clipping(){
795 // implement if no BC2 clipping has to run
797 for(Int_t i = 0; i < ftimebins; i++){
798 if(fChannelShort[i] < -1)
799 fChannelShort[i] = -1;
803 void AliTPCAltroEmulator::Zerosuppression(Int_t Threshold, Int_t MinSamplesaboveThreshold, Int_t Presamples, Int_t Postsamples){
805 // add again altro feature
808 //TODO: Implement "Altro zsu merging"
809 //Int_t Postsamplecounter = 0;
810 //Int_t setPostsample = 0;
812 for(Int_t i = 0; i < ftimebins; i++){
813 if(fChannelShort[i] >= Threshold)
819 Int_t startofclustersequence = -1;
820 Int_t endofClustersInSequence = -1;
822 for(Int_t i = 0; i < ftimebins; i++){
823 if( (fADCkeep[i] == 1) && (GetElement(fADCkeep,i-1) == 0) ){
824 startofclustersequence = i;
826 if( (fADCkeep[i] == 1) && (GetElement(fADCkeep,i+1) == 0) ){
827 endofClustersInSequence = i;
829 //cout << i << " startofclustersequence: " << startofclustersequence << " endofClustersInSequence: " << endofClustersInSequence;
830 if( (startofclustersequence != -1) && (endofClustersInSequence != -1) ){
831 //cout << " found! " << (endofClustersInSequence - startofclustersequence + 1);
832 if ( (endofClustersInSequence - startofclustersequence + 1) < MinSamplesaboveThreshold ){
833 for(Int_t j = startofclustersequence; j <= endofClustersInSequence ; j++){
837 startofclustersequence = -1;
838 endofClustersInSequence = -1;
843 /*for(Int_t i = 0; i < ftimebins; i++){
844 if( (GetElement(fADCkeep,i-1) == 1) && (GetElement(fADCkeep,i) == 0) && (GetElement(fADCkeep,i+1) == 1) ){
845 SetElement(fADCkeep,i,1);
849 for(Int_t i = 0; i < ftimebins; i++){
850 if( (fADCkeep[i] == 1) && (GetElement(fADCkeep,i-1) == 0) ){
851 for(Int_t j = i-Presamples ; j <= i; j++){
852 SetElement(fADCkeep,j,1);
856 for(Int_t i = ftimebins; i >= 0; i--){
857 if( (fADCkeep[i] == 1) && (GetElement(fADCkeep,i+1) == 0) ){
858 for(Int_t j = i ; j <= i+Postsamples; j++){
859 SetElement(fADCkeep,j,1);
863 /*cout << " Postsamplecounter: " << Postsamplecounter;
864 for(Int_t j = i+1 ; j <= i+Postsamples; j++){
865 SetElement(fADCkeep,j,1);
870 cout << i << " ADCK: " << GetElement(fADCkeep,i);
871 cout << " Postsam: " << Postsamplecounter << " ADCK: " << GetElement(fADCkeep,i);*/
873 for(Int_t i = 0; i < ftimebins; i++){
874 if( (fADCkeep[i] == 1) && (GetElement(fADCkeep,i+1) == 0) && ( (GetElement(fADCkeep,i+3) == 1) || (GetElement(fADCkeep,i+2) == 1) ) ){
875 SetElement(fADCkeep,i+1,1);
876 SetElement(fADCkeep,i+2,1);
880 for(Int_t i = 0; i < ftimebins; i++){
881 if( !GetKeepChannel(i) ) {
882 SetElement(fChannelShort,i,-1); // set non relevant data to -1
889 /** @brief formats the data like the ALTRO. Result is a 64 bit array
891 * formats the data like the ALTRO. Result is a 64 bit array
895 void AliTPCAltroEmulator::DataFormater(){
897 // formats the data like the ALTRO. Result is a 64 bit array
904 /** @brief calculates the compression out of the bitmask
906 * calculates the compression out of the bitmask with the set adc values
908 * @return \c Float_t consisting of the compression factor
910 Float_t AliTPCAltroEmulator::CalculateCompression() {
912 // calculates the compression out of the bitmask
915 // calculation is based on altro 10 bit words ..
919 Float_t retval = 0.0;
921 for(Int_t i = 0; i < ftimebins; i++){
922 if(fADCkeep[i] == 1){
925 if( (fADCkeep[i] == 1) && (GetElement(fADCkeep,i+1) == 0) ){
929 data = sample + cluster*2;
930 data = data + data%4 + 4;
932 retval = ftimebins / (Float_t)data;//num of timebins is equal to max number of samples
939 Short_t AliTPCAltroEmulator::GetElement(short* Array,Int_t index){
941 // GetElement of array
945 else if(index >= ftimebins)
951 void AliTPCAltroEmulator::SetElement(short* Array,Int_t index,Short_t value){
953 // SetElement of array
957 else if(index >= ftimebins)
960 Array[index] = value;
963 Int_t AliTPCAltroEmulator::InBand(Int_t ADC,Int_t bsl, Int_t LowThreshold, Int_t HighThreshold){
965 // check if it's within the band of search
967 Int_t fLow = bsl - LowThreshold;
968 Int_t fHigh = bsl + HighThreshold;
969 if( (ADC <= fHigh) && (ADC >= fLow) )
975 Int_t AliTPCAltroEmulator::InRange(Int_t parameter,Int_t Low,Int_t High,const char *Module,const char *ParameterName){
977 // checks it it's within the range
982 if(parameter > High){
983 snprintf(out,255,"Error | %s | Parameter %s is to big, has to be %d <= %s <= %d, is %d, now set to %d",Module,ParameterName,Low,ParameterName,High,parameter,High);
986 }else if(parameter < Low){
987 snprintf(out,255,"Error | %s | Parameter %s is to small, has to be %d <= %s <= %d, is %d, now set to %d",Module,ParameterName,Low,ParameterName,High,parameter,Low);
996 Short_t AliTPCAltroEmulator::GetShortChannel(Int_t i){
998 // GetElement of channel
1000 return GetElement(fChannelShort,i);
1003 Short_t AliTPCAltroEmulator::GetKeepChannel(Int_t i){
1005 // GetElement of Keep Channel
1007 return GetElement(fADCkeep,i);
1010 Bool_t AliTPCAltroEmulator::WriteEvent(Int_t ievent) {
1012 // Write event to the DDL data folders
1015 for (Int_t ddlID=0;ddlID<216;++ddlID) {
1016 Bool_t *channelsDDL=fChannels+ddlID*4096 ;
1017 Short_t *adcsDDL =fADCs +ddlID*4096*1024;
1018 UInt_t *cdhDDL =fCDHs +ddlID*8 ;
1019 UInt_t *trailerDDL =fTrailers+ddlID*9 ;
1021 FILE *file=fopen(Form("%s/raw%d/TPC_%03d.ddl",
1022 fDDLFolderName.Data(),ievent,768+ddlID),
1028 // write CDH (first word to be altered later)
1029 for (i32=0;i32<8;++i32)
1030 fRawData[i32]=cdhDDL[i32];
1033 for (Int_t hwaddr=0;hwaddr<4096;++hwaddr) if (channelsDDL[hwaddr]) {
1034 Short_t *adcsChannel=adcsDDL+hwaddr*1024;
1036 // TODO: acqusition window
1037 for (Int_t it=0;it<1024-3;++it) {
1038 if (adcsChannel[it]>=0&&adcsChannel[it+3]>=0) {
1039 if (adcsChannel[it+1]<0) {
1041 adcsChannel[it+1]=0;
1043 if (adcsChannel[it+2]<0) {
1045 adcsChannel[it+2]=0;
1054 for (Int_t it=1023;it>=0;--it) {
1055 Short_t w10=adcsChannel[it];
1063 fRawData[i32+i10/3]|=w10<<(10*(2-i10%3));
1070 fRawData[i32+icw/3]|=cw <<(10*(2-icw%3));
1071 fRawData[i32+its/3]|=ts <<(10*(2-its%3));
1076 fRawData[i32]=0x1<<30|(i10-3)<<16|hwaddr;
1080 for (Int_t i=0;i<1024;++i) adcsChannel[i]=-1;
1081 channelsDDL[hwaddr]=kFALSE;
1084 // write RCU trailer
1085 fRawData[i32]=0x2<<30|(i32-8);i32++;
1086 for (Int_t i=0;i<8;++i)
1087 fRawData[i32++]=trailerDDL[i];
1089 // write first word of CDH
1092 Int_t nwritten=fwrite(fRawData,sizeof(UInt_t),i32,file);
1093 if (nwritten!=i32) return kFALSE;
1096 do {fRawData[--i32]=0;} while (i32>0);
1104 Bool_t AliTPCAltroEmulator::GDC2DDLs(AliRawVEvent *gdc,Int_t ievent) {
1106 // Converte GDC data to DDL format
1108 for(Int_t iLDC=0;iLDC<gdc->GetNSubEvents();++iLDC) {
1109 AliRawVEvent *ldc=gdc->GetSubEvent(iLDC);
1110 for(Int_t iEq=0;iEq<ldc->GetNEquipments();++iEq) {
1111 AliRawVEquipment *eq=ldc->GetEquipment(iEq);
1112 AliRawEquipmentHeader *eqHeader=eq->GetEquipmentHeader();
1113 Int_t eqSize=eqHeader->GetEquipmentSize();
1116 Int_t detId=AliDAQ::DetectorIDFromDdlID(eqHeader->GetId(),ddlIndex);
1118 FILE *ddlFile=fopen(Form("%s/raw%d/%s",
1119 fDDLFolderName.Data(),
1121 AliDAQ::DdlFileName(detId,ddlIndex)),
1123 AliRawData *rawData=eq->GetRawData();
1125 nwritten=fwrite(rawData->GetBuffer(),1,rawData->GetSize(),ddlFile);
1128 if (nwritten<rawData->GetSize()) return kFALSE;
1136 Bool_t AliTPCAltroEmulator::ConvertRawFilesToDate(Int_t nevents) {
1138 // Convertes Raw files to Date format
1141 // from $ALICE_ROOT/STEER/AliSimulation.cxx
1146 printf(" RAW to DATE CONVERSION: Run Number %d\n",fRunNumber);
1149 pipe=gSystem->OpenPipe(Form("dateStream -c -s -D -o %s -C -# %d -run %d",
1150 fOutputDateFileName.Data(),
1155 pipe=gSystem->OpenPipe(Form("dateStream -c -s -D -o %s -C -# %d",
1156 fOutputDateFileName.Data(),
1160 fprintf(stderr,"error: cannot execute command: %s",command);
1164 for (Int_t ievent=0;ievent<nevents;++ievent) {
1165 UInt_t detectorPattern = 0xFFFFFFFF;
1166 fprintf(pipe, "GDC DetectorPattern %u\n", detectorPattern);
1171 // loop over detectors and DDLs
1172 for (Int_t iDet = 0; iDet < AliDAQ::kNDetectors; iDet++) {
1173 if (!(iDet<=5 || iDet==17 )) continue;
1174 for (Int_t iDDL = 0; iDDL < AliDAQ::NumberOfDdls(iDet); iDDL++) {
1175 // printf("iDet=%d, iDDL=%d, filenmae=%s\n",iDet,iDDL,filename);
1176 Int_t ddlID = AliDAQ::DdlID(iDet,iDDL);
1177 Int_t ldcID = Int_t(ldc + 0.0001);
1178 ldc += AliDAQ::NumberOfLdcs(iDet) / AliDAQ::NumberOfDdls(iDet);
1180 // check existence and size of raw data file
1181 FILE* file = fopen(Form("%s/raw%d/%s",
1182 fDDLFolderName.Data(),
1184 AliDAQ::DdlFileName(iDet,iDDL)),
1186 if (!file) continue;
1187 fseek(file, 0, SEEK_END);
1188 unsigned long size = ftell(file);
1190 if (!size) continue;
1192 if (ldcID != prevLDC) {
1193 fprintf(pipe, " LDC Id %d\n", ldcID);
1196 fprintf(pipe,Form(" Equipment Id %d Payload %s/raw%d/%s\n",
1198 fDDLFolderName.Data(),
1200 AliDAQ::DdlFileName(iDet,iDDL))
1205 Int_t result = gSystem->ClosePipe(pipe);
1206 return (result == 0);
1209 void AliTPCAltroEmulator::InitBuffers() {
1211 // Initialization of the Buffers
1213 if (!fChannels) fChannels=new Bool_t [216*4096 ];
1214 if (!fCDHs ) fCDHs =new UInt_t [216*8 ];
1215 if (!fADCs ) fADCs =new Short_t[216*4096*1024];
1216 if (!fTrailers) fTrailers=new UInt_t [216*9 ];
1217 if (!fRawData ) fRawData =new UInt_t [ 1*4096*1024]; // be save...
1219 for (Int_t i=0;i<216*4096 ;++i) fChannels[i]=kFALSE;
1220 // no need to init CDHs
1221 for (Int_t i=0;i<216*4096*1024;++i) fADCs [i]=-1 ;
1222 // no need to init trailers
1223 for (Int_t i=0;i< 1*4096*1024;++i) fRawData [i]= 0 ;
1226 Bool_t AliTPCAltroEmulator::ConvertDateToRoot() {
1228 // convert a DATE file to a root file with the program "alimdc"
1231 // from $ALICE_ROOT/STEER/AliSimulation.cxx
1233 printf(" DATE to ROOT CONVERSION: Run Number %d\n",fRunNumber);
1236 const Int_t kDBSize = 2000000000; //2GB
1237 const Int_t kTagDBSize = 1000000000;
1238 const Bool_t kFilter = kFALSE;
1239 const Int_t kCompression = 1;
1241 // AliInfo(Form("converting DATE file %s to root file %s",
1242 // dateFileName, rootFileName));
1244 const char* rawDBFS[2] = { "/tmp/mdc1", "/tmp/mdc2" };
1245 const char* tagDBFS = "/tmp/mdc1/tags";
1247 // User defined file system locations
1248 if (gSystem->Getenv("ALIMDC_RAWDB1"))
1249 rawDBFS[0] = gSystem->Getenv("ALIMDC_RAWDB1");
1250 if (gSystem->Getenv("ALIMDC_RAWDB2"))
1251 rawDBFS[1] = gSystem->Getenv("ALIMDC_RAWDB2");
1252 if (gSystem->Getenv("ALIMDC_TAGDB"))
1253 tagDBFS = gSystem->Getenv("ALIMDC_TAGDB");
1255 gSystem->Exec(Form("rm -rf %s",rawDBFS[0]));
1256 gSystem->Exec(Form("rm -rf %s",rawDBFS[1]));
1257 gSystem->Exec(Form("rm -rf %s",tagDBFS));
1259 gSystem->Exec(Form("mkdir %s",rawDBFS[0]));
1260 gSystem->Exec(Form("mkdir %s",rawDBFS[1]));
1261 gSystem->Exec(Form("mkdir %s",tagDBFS));
1263 Int_t result = gSystem->Exec(Form("alimdc %d %d %d %d %s",
1264 kDBSize, kTagDBSize, kFilter, kCompression, fOutputDateFileName.Data()));
1265 gSystem->Exec(Form("mv %s/*.root %s", rawDBFS[0],fOutputRootFileName.Data()));
1267 gSystem->Exec(Form("rm -rf %s",rawDBFS[0]));
1268 gSystem->Exec(Form("rm -rf %s",rawDBFS[1]));
1269 gSystem->Exec(Form("rm -rf %s",tagDBFS));
1271 return (result == 0);
1274 void AliTPCAltroEmulator::RunEmulationOnRAWdata(AliRawReader *reader, Int_t plotFlag) {
1276 // Run the Altro Emulation on a full Raw data set (AliRawReader)
1277 // plus write the outcome in a RAW data format
1281 printf("ERROR cant run Altro Emulation: AliRawReader is zero. No RAW data file.\n");
1286 if (fDecoder) delete fDecoder;
1287 fDecoder=new AliTPCRawStreamV3(reader);
1292 TH1F hisO("DINO","DINO",1024,0,1024);
1293 TH1F his("DIN","DIN",1024,0,1024);
1294 his.GetYaxis()->SetRangeUser(-20,90);
1295 Short_t *data = new Short_t[1024];
1298 c1 = new TCanvas("c1","c1");
1299 c1->SetGridx(); c1->SetGridy();
1304 while (fReader->NextEvent()) {
1306 if (fReader->GetRunNumber()>0) fRunNumber=fReader->GetRunNumber();
1307 gSystem->Exec(Form("mkdir -p %s/raw%d/",fDDLFolderName.Data(),ievent));
1308 GDC2DDLs(const_cast<AliRawVEvent*>(fReader->GetEvent()),ievent);
1311 while (fDecoder->NextDDL()) {
1312 Int_t ddlID=fDecoder->GetDDLNumber();
1313 printf("ddl: %d (%d/216)\n",ddlID,++ddlC);
1315 Bool_t *channelsDDL=fChannels+ddlID*4096 ;
1316 Short_t *adcsDDL =fADCs +ddlID*4096*1024 ;
1317 UInt_t *cdhDDL =fCDHs +ddlID*8 ;
1318 UInt_t *trailerDDL =fTrailers+ddlID*9 ;
1321 for (Int_t i=0;i<8;++i)
1322 // just to show how ugly it is...
1323 cdhDDL[i]=reinterpret_cast<UInt_t*>(const_cast<AliRawDataHeader*>(fReader->GetDataHeader()))[i];
1326 while (fDecoder->NextChannel()) {
1327 Int_t hwaddr=fDecoder->GetHWAddress();
1328 Int_t sector=fDecoder->GetSector();
1329 Int_t row=fDecoder->GetRow();
1330 Int_t pad=fDecoder->GetPad();
1331 Short_t *adcsChannel=adcsDDL+hwaddr*1024;
1332 while (fDecoder->NextBunch()) {
1333 UInt_t ts =fDecoder->GetStartTimeBin();
1334 Int_t cw =fDecoder->GetBunchLength() ;
1335 const UShort_t *signals=fDecoder->GetSignals() ;
1336 for (Int_t ci=0;ci<cw;++ci) {
1337 Short_t s=signals[ci];
1339 // TODO aqcuisition window
1340 if (0<=t&&t<(1024-3)) {
1341 channelsDDL[hwaddr]=kTRUE;
1342 if (adcsChannel[t]<0)
1346 if (adcsChannel[t]>0x3ff)
1347 adcsChannel[t]=0x3ff;
1352 // search start of aquisition
1353 Int_t t0 = 0; while (adcsChannel[t0]==-1) t0++;
1354 // search end of aquisition
1355 Int_t tE = 1024; while (adcsChannel[tE]==-1) tE--;
1357 // channel is complete - Perform Altro Emulation
1358 if (plotFlag!=0 && !(chanCount%plotFlag) ) {
1359 for (Int_t t=0; t<1024; t++) {
1360 his.SetBinContent(t+1,adcsChannel[t]);
1362 his.SetTitle(Form("sig_sec%d_row%d_pad%d",sector,row,pad));
1363 his.SetStats(0); his.GetXaxis()->SetTitle("timebin");
1367 // FEED THE ALTRO EMULATOR WITH CLEAN SIGNAL (no aquisition-window ghosts)
1368 Int_t timebins = tE-t0+1;
1369 for (Int_t t=t0;t<(t0+timebins);t++)
1370 data[t-t0]=adcsChannel[t];
1371 SetChannelData(timebins,data);
1373 Int_t roc = (sector%36)>=18; // 0 for IROC, 1 for OROC
1375 for (Int_t t=t0;t<(t0+timebins);t++)
1376 adcsChannel[t]=data[t-t0];
1378 if (plotFlag!=0 && !(chanCount%plotFlag) ) {
1379 for (Int_t t=0; t<1024; t++)
1380 hisO.SetBinContent(t+1,adcsChannel[t]);
1381 hisO.SetStats(0); hisO.SetLineColor(2);
1382 hisO.DrawCopy("same");
1384 c1->SaveAs(Form("%s/sig_sec%02d_row%02d_pad%03d_%s_%d%d%d%d%d.png",
1385 fDDLFolderName.Data(),sector,row,pad,
1386 fOutputRootFileName.Data(),
1387 fOnBSL1,fOnTCF,fOnBSL2,fOnClip,fOnZSU));
1398 UChar_t *rcuTrailer;
1399 fDecoder->GetRCUTrailerData(rcuTrailer);
1400 for (Int_t i=0;i<= /* (!) */ fDecoder->GetRCUTrailerSize()/4;++i)
1401 trailerDDL[i]=reinterpret_cast<UInt_t*>(rcuTrailer)[i]; // again: UGLY!
1405 if (ddlC>0) WriteEvent(ievent++);
1408 delete[] data; // free space
1410 // convert to date and back
1411 ConvertRawFilesToDate(ievent);
1412 ConvertDateToRoot();