2 TPC DA for online calibration
4 Contact: Haavard.Helstrup@cern.ch
6 Run Type: CALIBRATION_PULSER
8 Number of events needed: 100
10 Output Files: tpcPulser.root, to be exported to the DAQ FXS
12 Trigger types used: CALIBRATION_EVENT
18 TPCda_pulser.cxx - calibration algorithm for TPC pulser events
20 10/06/2007 sylvain.chapeland@cern.ch : first version - clean skeleton based on DAQ DA case1
21 30/09/2007 haavard.helstrup@cern.ch : created pulser DA based on pedestal code
22 19/09/2008 J.Wiechula@gsi.de: Added export of the calibration data to the AMORE data base.
23 Added support for configuration files.
24 23/04/2011 Christian.Lippmann@cern.ch : Added output of acsii files for online
25 26/09/2014 Christian.Lippmann@cern.ch : CHange for new DAQ setup with one CRORC per LDC
26 26/09/2014 Jens.Wiechula@cern.ch : comment out obsolete AliTPCRawStream
28 contact: marian.ivanov@cern.ch
31 This process reads RAW data from the files provided as command line arguments
32 and save results in a file (named from RESULT_FILE define - see below).
36 #define RESULT_FILE "tpcPulser.root"
37 #define FILE_ID "pulser"
38 #define MAPPING_FILE "tpcMapping.root"
39 #define CONFIG_FILE "TPCPULSERda.conf"
40 #define Q_FILE "tpcPulserQ.data"
41 #define DEAD_FILE "tpcDeadChannelsPulser.data"
42 #define AliDebugLevel() -1
57 #include "TPluginManager.h"
59 #include "TObjString.h"
64 #include "AliRawReader.h"
65 #include "AliRawReaderDate.h"
66 #include "AliTPCmapper.h"
67 //#include "AliTPCRawStreamV3.h"
68 #include "AliTPCROC.h"
69 #include "AliTPCCalROC.h"
70 #include "AliTPCCalPad.h"
71 #include "AliMathBase.h"
72 #include "TTreeStream.h"
75 #include "AliTPCConfigDA.h"
81 // TPC calibration algorithm includes
83 #include "AliTPCCalibPulser.h"
86 Arguments: list of DATE raw data files
88 int main(int argc, char **argv) {
89 /* log start of process */
90 printf("TPC Pulser DA started - %s\n",__FILE__);
93 printf("Wrong number of arguments\n");
96 //AliLog::SetClassDebugLevel("AliTPCRawStreamV3",-5);
97 AliLog::SetClassDebugLevel("AliRawReaderDate",-5);
98 AliLog::SetClassDebugLevel("AliTPCAltroMapping",-5);
99 AliLog::SetModuleDebugLevel("RAW",-5);
101 gROOT->GetPluginManager()->AddHandler("TVirtualStreamerInfo",
108 TString daterolename(gSystem->Getenv("DATE_ROLE_NAME"));
109 if ( daterolename == "" ) {
110 printf("Error: Variable DATE_ROLE_NAME not defined! Exiting ...\n");
114 if ( daterolename.EndsWith("-0") ) inner = true;
115 else if ( daterolename.EndsWith("-1") ) inner = false;
117 printf("Error: Variable DATE_ROLE_NAME neither ends with -0 nor -1 (E.g. ldc-TPC-C12-1)! Exiting ...\n");
122 /* declare monitoring program */
124 status=monitorDeclareMp( __FILE__ );
126 printf("monitorDeclareMp() failed : %s\n",monitorDecodeError(status));
131 AliTPCmapper *mapping = 0; // The TPC mapping
133 unsigned long32 runNb=0; //run number
134 // configuration options
135 // if test setup get parameters from $DAQDA_TEST_DIR
138 /* copy locally the mapping file from daq detector config db */
139 sprintf(localfile,"./%s",MAPPING_FILE);
140 status = daqDA_DB_getFile(MAPPING_FILE,localfile);
142 printf("Failed to get mapping file (%s) from DAQdetDB, status=%d\n", MAPPING_FILE, status);
146 /* open the mapping file and retrieve mapping object */
147 TFile *fileMapping = new TFile(MAPPING_FILE, "read");
148 mapping = (AliTPCmapper*) fileMapping->Get("tpcMapping");
153 printf("Failed to get mapping object from %s. ...\n", MAPPING_FILE);
156 printf("Got mapping object from %s\n", MAPPING_FILE);
160 // DA configuration from configuration file
162 //retrieve configuration file
163 sprintf(localfile,"./%s",CONFIG_FILE);
164 status = daqDA_DB_getFile(CONFIG_FILE,localfile);
166 printf("Failed to get configuration file (%s) from DAQdetDB, status=%d\n", CONFIG_FILE, status);
169 AliTPCConfigDA config(CONFIG_FILE);
170 // check configuration options
171 Bool_t skipAmore=kFALSE;
173 //skip the amore part
174 if ( config.GetConfigurationMap()->GetValue("SkipAmore") ) {
175 skipAmore=((TObjString*)config.GetConfigurationMap()->GetValue("SkipAmore"))->GetString().Atoi();
176 printf("TPCPULSERda: Skip Amore set in config\n");
179 // create calibration object
180 AliTPCCalibPulser calibPulser(config.GetConfigurationMap()); // pulser calibration algorithm
181 calibPulser.SetAltroMapping(mapping->GetAltroMapping()); // Use altro mapping we got from daqDetDb
183 //===========================//
184 // loop over RAW data files //
185 //==========================//
187 for(i=1;i<argc;i++) {
189 /* define data source : this is argument i */
190 printf("Processing file %s\n", argv[i]);
191 status=monitorSetDataSource( argv[i] );
193 printf("monitorSetDataSource() failed : %s\n",monitorDecodeError(status));
199 struct eventHeaderStruct *event;
201 /* check shutdown condition */
202 if (daqDA_checkShutdown()) {break;}
204 /* get next event (blocking call until timeout) */
205 status=monitorGetEventDynamic((void **)&event);
206 if (status==MON_ERR_EOF) {
207 printf ("End of File %d detected\n",i);
208 break; /* end of monitoring file has been reached */
212 printf("monitorGetEventDynamic() failed : %s\n",monitorDecodeError(status));
216 /* retry if got no event */
221 // get the run number
222 runNb = event->eventRunNb;
223 // Pulser calibration
224 calibPulser.ProcessEvent(event);
232 // Analyse pulser data and write them to rootfile
234 calibPulser.Analyse();
235 printf ("%d events processed\n",nevents);
237 TFile * fileTPC = new TFile (RESULT_FILE,"recreate");
238 calibPulser.Write("tpcCalibPulser");
240 printf("Wrote %s\n",RESULT_FILE);
242 /* store the result file on FES */
244 status=daqDA_FES_storeFile(RESULT_FILE,FILE_ID);
249 //Send objects to the AMORE DB
252 printf ("AMORE part\n");
253 const char *amoreDANameorig=gSystem->Getenv("AMORE_DA_NAME");
254 //cheet a little -- temporary solution (hopefully)
256 //currently amoreDA uses the environment variable AMORE_DA_NAME to create the mysql
257 //table in which the calib objects are stored. This table is dropped each time AmoreDA
258 //is initialised. This of course makes a problem if we would like to store different
259 //calibration entries in the AMORE DB. Therefore in each DA which writes to the AMORE DB
260 //the AMORE_DA_NAME env variable is overwritten.
262 //find processed sector
265 for ( Int_t roc = 0; roc < 72; roc++ ) {
266 if ( !calibPulser.GetCalRocT0(roc) ) continue;
267 if (mapping->GetSideFromRoc(roc)==1) sideName='C';
268 sector = mapping->GetSectorFromRoc(roc);
270 //gSystem->Setenv("AMORE_DA_NAME",Form("TPC-%c%02d-%s",sideName,sector,FILE_ID));
271 gSystem->Setenv("AMORE_DA_NAME",Form("%s-%s", gSystem->Getenv("DATE_ROLE_NAME"), FILE_ID));
276 TObjString info(Form("Run: %u; Date: %s",runNb,time.AsSQLString()));
278 amore::da::AmoreDA amoreDA(amore::da::AmoreDA::kSender);
280 statusDA+=amoreDA.Send("PulserT0",calibPulser.GetCalPadT0());
281 statusDA+=amoreDA.Send("PulserQ",calibPulser.GetCalPadQ());
282 statusDA+=amoreDA.Send("PulserRMS",calibPulser.GetCalPadRMS());
283 statusDA+=amoreDA.Send("arrayTmean",calibPulser.GetMeanTimeSectorArray());
284 statusDA+=amoreDA.Send("Info",&info);
286 printf("Waring: Failed to write one of the calib objects to the AMORE database\n");
288 printf("Waring: No data found!\n");
291 if (amoreDANameorig) gSystem->Setenv("AMORE_DA_NAME",amoreDANameorig);
295 // Now prepare ASCII files for local ALTRO configuration through DDL.
297 ofstream deadchannelfile;
301 deadchannelfile.open(DEAD_FILE);
303 qfile << 19 << std::endl; // Pulser Q
304 deadchannelfile << 14 << std::endl; // Mark file to contain NOISY or DEAD CHANNELS
306 Int_t ctr_channel = 0;
309 // inner==true : calROC from ldc-0 contains: rcus 0,1 for IROC and rcu 2 for OROC
310 // inner==false: calROC from ldc-1 contains: nothingfor IROC and rcus 3,4,5 for OROC
311 for ( Int_t roc = 0; roc < 72; roc++ ) {
312 if ( !calibPulser.GetCalRocQ(roc) ) continue;
313 bool isIROC= mapping->IsIROC(roc);
314 Int_t side = mapping->GetSideFromRoc(roc);
315 Int_t sec= mapping->GetSectorFromRoc(roc);
316 Int_t minrcu, maxrcu;
317 if( isIROC ) { minrcu=0; maxrcu=1; }
318 //else if ( inner) { minrcu=2; maxrcu=2; }
319 //else { minrcu=3; maxrcu=5; }
320 else { minrcu=2; maxrcu=5; }
321 for ( int rcu = minrcu; rcu <= maxrcu; rcu++ ) {
322 //Int_t patch = mapping->IsIROC(roc) ? rcu : rcu+2;
323 for ( int branch = 0; branch < 2; branch++ ) {
324 for ( int fec = 0; fec < mapping->GetNfec(rcu, branch); fec++ ) {
325 for ( int altro = 0; altro < 8; altro++ ) {
326 for ( int channel = 0; channel < 16; channel++ ) {
327 Int_t hwadd = mapping->CodeHWAddress(branch, fec, altro, channel);
328 Int_t row = mapping->GetPadRow(rcu, hwadd); // row in a ROC
329 Int_t globalrow = mapping->GetGlobalPadRow(rcu, hwadd); // row in full sector
330 Int_t pad = mapping->GetPad(rcu, hwadd);
332 if ( (pad<1) || (pad>mapping->GetNpads(globalrow)-2) ) continue;
333 Float_t Q = calibPulser.GetCalRocQ(roc)->GetValue(row,pad);
334 qfile << ctr_channel++ << "\t" << side << "\t" << sec << "\t" << rcu << "\t" << hwadd << "\t" << Q << std::endl;
335 if ( fabs(Q) < 2) { // dead channel
336 deadchannelfile << ctr_dead++ << "\t" << side << "\t" << sec << "\t"
337 << rcu << "\t" << hwadd << "\t" << Q << std::endl;
339 } // end channel for loop
340 } // end altro for loop
341 } // end fec for loop
342 } // end branch for loop
343 } // end rcu for loop
347 deadchannelfile.close();
349 printf("Wrote ASCII file. Found %d dead channels.\n", ctr_dead);