1 #ifndef ALITRDGEOMETRY_H
2 #define ALITRDGEOMETRY_H
3 /* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * See cxx source for full Copyright notice */
8 ///////////////////////////////////////////////////////////////////////////////
10 // TRD geometry class //
12 ///////////////////////////////////////////////////////////////////////////////
14 #include "AliGeometry.h"
16 class AliTRDparameter;
18 class AliTRDgeometry : public AliGeometry {
22 enum { kNplan = 6, kNcham = 5, kNsect = 18, kNdet = 540 };
25 virtual ~AliTRDgeometry();
27 virtual void CreateGeometry(Int_t *idtmed);
28 virtual Int_t IsVersion() const = 0;
30 virtual Bool_t Impact(const TParticle* ) const { return kTRUE; };
31 virtual Bool_t Local2Global(Int_t d, Float_t *local, Float_t *global, AliTRDparameter *par) const;
32 virtual Bool_t Local2Global(Int_t p, Int_t c, Int_t s, Float_t *local, Float_t *global, AliTRDparameter *par) const;
34 virtual Bool_t Global2Local(Int_t mode, Float_t *local, Float_t *global, Int_t* index, AliTRDparameter *par) const;
35 virtual Bool_t Global2Detector(Float_t global[3], Int_t index[3], AliTRDparameter *par);
37 virtual Bool_t Rotate(Int_t d, Float_t *pos, Float_t *rot) const;
38 virtual Bool_t RotateBack(Int_t d, Float_t *rot, Float_t *pos) const;
40 static Int_t Nsect() { return fgkNsect; };
41 static Int_t Nplan() { return fgkNplan; };
42 static Int_t Ncham() { return fgkNcham; };
43 static Int_t Ndet() { return fgkNdet; };
45 static Float_t Rmin() { return fgkRmin; };
46 static Float_t Rmax() { return fgkRmax; };
47 static Float_t Zmax1() { return fgkZmax1; };
48 static Float_t Zmax2() { return fgkZmax2; };
50 static Float_t Cwidcha() { return (fgkSwidth2 - fgkSwidth1)
51 / fgkSheight * (fgkCH + fgkVspace); };
52 static Float_t Cheight() { return fgkCH; };
53 static Float_t Cspace() { return fgkVspace; };
54 static Float_t CraHght() { return fgkCraH; };
55 static Float_t CdrHght() { return fgkCdrH; };
56 static Float_t CamHght() { return fgkCamH; };
57 static Float_t CroHght() { return fgkCroH; };
58 static Float_t MyThick() { return fgkMyThick; };
59 static Float_t DrThick() { return fgkDrThick; };
60 static Float_t AmThick() { return fgkAmThick; };
61 static Float_t DrZpos() { return fgkDrZpos; };
62 static Float_t RpadW() { return fgkRpadW; };
63 static Float_t CpadW() { return fgkCpadW; };
65 virtual void SetPHOShole() = 0;
66 virtual void SetRICHhole() = 0;
68 virtual void SetOldGeometry();
70 virtual Bool_t GetPHOShole() const = 0;
71 virtual Bool_t GetRICHhole() const = 0;
73 virtual Int_t GetDetectorSec(const Int_t p, const Int_t c) const;
74 virtual Int_t GetDetector(const Int_t p, const Int_t c, const Int_t s) const;
75 virtual Int_t GetPlane(const Int_t d) const;
76 virtual Int_t GetChamber(const Int_t d) const;
77 virtual Int_t GetSector(const Int_t d) const;
79 Float_t GetChamberWidth(const Int_t p) const { return fCwidth[p]; };
80 Float_t GetChamberLength(const Int_t p, const Int_t c) const { return fClength[p][c]; };
82 virtual void GetGlobal(const AliRecPoint* , TVector3& , TMatrix& ) const { };
83 virtual void GetGlobal(const AliRecPoint* , TVector3& ) const { };
85 static Double_t GetAlpha() { return 2 * 3.14159265358979323846 / fgkNsect; };
89 static const Int_t fgkNsect; // Number of sectors in the full detector (18)
90 static const Int_t fgkNplan; // Number of planes of the TRD (6)
91 static const Int_t fgkNcham; // Number of chambers in z-direction (5)
92 static const Int_t fgkNdet; // Total number of detectors (18 * 6 * 5 = 540)
94 static const Float_t fgkRmin; // Minimal radius of the TRD
95 static const Float_t fgkRmax; // Maximal radius of the TRD
97 static const Float_t fgkZmax1; // Half-length of the TRD at outer radius
98 static const Float_t fgkZmax2; // Half-length of the TRD at inner radius
100 static const Float_t fgkSheight; // Height of the TRD-volume in spaceframe (BTR1-3)
101 static const Float_t fgkSwidth1; // Lower width of the TRD-volume in spaceframe (BTR1-3)
102 static const Float_t fgkSwidth2; // Upper width of the TRD-volume in spaceframe (BTR1-3)
103 static const Float_t fgkSlenTR1; // Length of the TRD-volume in spaceframe (BTR1)
104 static const Float_t fgkSlenTR2; // Length of the TRD-volume in spaceframe (BTR2)
105 static const Float_t fgkSlenTR3; // Length of the TRD-volume in spaceframe (BTR3)
107 static const Float_t fgkSMpltT; // Thickness of the super module side plates
108 static const Float_t fgkSMgapT; // Thickness of the gap between side plates and space frame
110 static const Float_t fgkCraH; // Height of the radiator part of the chambers
111 static const Float_t fgkCdrH; // Height of the drift region of the chambers
112 static const Float_t fgkCamH; // Height of the amplification region of the chambers
113 static const Float_t fgkCroH; // Height of the readout of the chambers
114 static const Float_t fgkCH; // Total height of the chambers
116 static const Float_t fgkVspace; // Vertical spacing of the chambers
117 static const Float_t fgkHspace; // Horizontal spacing of the chambers
119 static const Float_t fgkCalT; // Thickness of the lower aluminum frame
120 static const Float_t fgkCclsT; // Thickness of the lower G10 frame sides
121 static const Float_t fgkCclfT; // Thickness of the lower G10 frame front
122 static const Float_t fgkCcuT; // Thickness of the upper G10 frame
123 static const Float_t fgkCauT; // Thickness of the upper aluminum frame
125 static const Float_t fgkCroW; // Additional width of the readout chamber frames
127 static const Float_t fgkCpadW; // Difference of outer chamber width and pad plane width
128 static const Float_t fgkRpadW; // Difference of outer chamber width and pad plane width
130 static const Float_t fgkRaThick; // Thickness of the radiator
131 static const Float_t fgkMyThick; // Thickness of the mylar-layer
132 static const Float_t fgkXeThick; // Thickness of the gas volume
133 static const Float_t fgkDrThick; // Thickness of the drift region
134 static const Float_t fgkAmThick; // Thickness of the amplification region
135 static const Float_t fgkCuThick; // Thickness of the pad plane
136 static const Float_t fgkSuThick; // Thickness of the HEXCEL+G10 support structure
137 static const Float_t fgkFeThick; // Thickness of the FEE + signal lines
138 static const Float_t fgkCoThick; // Thickness of the PE of the cooling device
139 static const Float_t fgkWaThick; // Thickness of the cooling water
141 static const Float_t fgkRaZpos; // Position of the radiator
142 static const Float_t fgkMyZpos; // Position of the mylar-layer
143 static const Float_t fgkDrZpos; // Position of the drift region
144 static const Float_t fgkAmZpos; // Position of the amplification region
145 static const Float_t fgkCuZpos; // Position of the pad plane
146 static const Float_t fgkSuZpos; // Position of the HEXCEL+G10 support structure
147 static const Float_t fgkFeZpos; // Position of the FEE + signal lines
148 static const Float_t fgkCoZpos; // Position of the PE of the cooling device
149 static const Float_t fgkWaZpos; // Position of the colling water
151 Float_t fCwidth[kNplan]; // Outer widths of the chambers
152 Float_t fClength[kNplan][kNcham]; // Outer lengths of the chambers
153 Float_t fClengthPH[kNplan][kNcham]; // For sectors with holes for the PHOS
154 Float_t fClengthRH[kNplan][kNcham]; // For sectors with holes for the RICH
156 Float_t fRotA11[kNsect]; // Matrix elements for the rotation
157 Float_t fRotA12[kNsect]; // Matrix elements for the rotation
158 Float_t fRotA21[kNsect]; // Matrix elements for the rotation
159 Float_t fRotA22[kNsect]; // Matrix elements for the rotation
161 Float_t fRotB11[kNsect]; // Matrix elements for the backward rotation
162 Float_t fRotB12[kNsect]; // Matrix elements for the backward rotation
163 Float_t fRotB21[kNsect]; // Matrix elements for the backward rotation
164 Float_t fRotB22[kNsect]; // Matrix elements for the backward rotation
166 ClassDef(AliTRDgeometry,6) // TRD geometry base class