-# $Id$
# ----------------------------------------------------------------
# This script sets the default environment variables for
-# Alice Geant4 based prototype
-# Options: -g verbose mode
-# local recomended local configuration
-#
-# csh version by I.Gonzalez 18.2.2000
+# Alice Geant4 based prototype. Based on the sh version.
+# I. Gonzalez 03.09.2002
-
-
-#
-# ==================================================================
-# Alice configuration options: Please define your selection with the
-# variables below.
-# ==================================================================
-#
-
-#
-# ====== AG4_VERSION
-# Geant4 version
-# If set: the provided Geant4 version and not the default one is set
-#setenv AG4_VERSION 2.0_test
-
-#
-# ====== AG4_VISUALIZE
-# Set/Unset to get/avoid Geant4 visualisation.
-setenv AG4_VISUALIZE 1
-#unsetenv AG4_VISUALIZE
-
-#
-# ====== AG4_OPACS
-# Set/Unset to get OPACS as a Geant4 visualisation driver.
-#setenv AG4_OPACS 1
-unsetenv AG4_OPACS
-
-#
-# ====== AG4_MAKESHLIB
-# If set: shared libraris are created
-setenv AG4_MAKESHLIB 1
-#unsetenv AG4_MAKESHLIB
-
-
-#
-# Resolve input parameters
-#
-set VERBOSE = "NO"
-set LOCAL = "NO"
-set SILENT = "NO"
-foreach param ( $* )
- switch ( $param )
- case -g:
- set VERBOSE="YES"; shift; breaksw;
- case local:
- set LOCAL="YES"; shift; breaksw;
- case silent:
- set SILENT="YES"; shift; breaksw;
- endsw
-end
-
-#
-# ==================================================================
-# Key path variables
-# ==================================================================
-#
-
-if ( "$LOCAL" == "NO" ) then
- #
- # AFS
- #
-
- # ====== ALICE_BASE
- # ALICE base directory
- set ALICE_BASE = /afs/cern.ch/alice/offline
-
- # ====== G4_BASE
- # Geant4 base directory
- set G4_BASE = ${ALICE_BASE}/geant4
-
- # ====== LHCXX_BASE
- # LHC++ base directory
- set LHCXX_BASE = /afs/cern.ch/sw/lhcxx/specific/@sys
-
- # ====== ROOT_BASE
- # Root base directory
- set ROOT_BASE = /afs/cern.ch/alice/library/root
- # to be removed after aCC support will be defined
- # in the offline in a standard way
- if ( "`uname`" == "HP-UX" ) then
- set ROOT_BASE = /afs/cern.ch/alice/library/.hp_ux102/root.2.23.aCC
- endif
-
- # ====== IRST_BASE
- # IRST code check tool base directory
- setenv IRST_BASE /afs/cern.ch/alice/offline/geant4/tools/IRST
-
-else
- #
- # recommended local installation
- #
-
- # ====== ALICE_BASE
- # ALICE base directory
- set ALICE_BASE = $HOME/dev
-
- # ====== G4_BASE
- # Geant4 base directory
- set G4_BASE = $HOME/dev
-
- # ====== LHCXX_BASE
- # LHC++ base directory
- set LHCXX_BASE = $HOME/dev
-
- # ====== ROOT_BASE
- # Root base directory
- set ROOT_BASE = $HOME/dev/root
-
- # ====== IRST_BASE
- # IRST code check tool base directory
- setenv IRST_BASE $HOME/dev/tools/IRST
-
-endif
-
-
-#....................................... SKIP ................................
-#
-# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-# You should not need to change
-# the lines below this one
-# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-# ====== AG4_INSTALL
-# Alice Geant4 install directory
-#
-setenv AG4_INSTALL $ALICE_ROOT/AliGeant4
-setenv G3TOG4 1
-setenv G3G4_NO_REFLECTION 1
-
-# Set variables depending on other variables
-# if opacs is selected then select also visualize
-if ( "$?AG4_OPACS" == 1 ) then
- setenv AG4_VISUALIZE 1
-endif
-
-# Start the output
-if ( "$VERBOSE" == "YES" ) then
- echo " "
- echo " =========================================="
- echo " ALICE Geant4 environment configuration"
- echo " =========================================="
-
- #
- # Some output on the selections...
- #
-
- if ("$?AG4_VISUALIZE" == 1) then
- echo "Geant4 visualisation is selected."
- else
- echo "Geant4 visualisation is NOT selected."
- endif
- if ("$?AG4_OPACS" == 1) then
- echo "OPACS driver is selected."
- else
- echo "OPACS driver is NOT selected."
- endif
- if ("$?AG4_NOPHYSICS" == 1) then
- echo "Only geantino or charged geantino can be shooted."
- else
- echo "Full physics has been selected."
- endif
- if ("$?AG4_ODBMS" == 1) then
- echo "The environment for using Objectivity will be set."
- else
- echo "No Geant4 Persistency."
- endif
-
-endif
-
-#
-# ROOT Alice definitions & options
-# ==================================
-#
-if ( "$?ROOTSYS" == 0 ) then
- setenv ROOTSYS ${ROOT_BASE}
-endif
-if ( "$VERBOSE" == "YES" ) then
- echo " "
- echo "ROOT"
- echo "===="
- echo ROOTSYS set to $ROOTSYS
-endif
-
-#
-# Geant4
-# ==================================
-#
-if ( "$VERBOSE" == "YES" ) then
- echo " "
- echo "Geant4 env. variables..."
- echo "============================"
-endif
-if ("$?AG4_VERSION" == 0) then
- setenv G4INSTALL ${G4_BASE}/geant4
-else
- setenv G4INSTALL ${G4_BASE}/g4dev/geant4.${AG4_VERSION}
-endif
-
-if ("$?AG4_MAKESHLIB" == 0) then
- unsetenv G4LIB_BUILD_SHARED
-else
- setenv G4LIB_BUILD_SHARED 1
-endif
-
-# path to data files needed by hadronic processes
-setenv G4LEVELGAMMADATA ${G4INSTALL}/data/PhotonEvaporation
-
-# This is architecture dependent...
-set SYSTEM = `uname`
-if ( $SYSTEM == "HP-UX" ) then
- setenv G4SYSTEM "HP-aCC"
- #setenv G4USE_OSPACE 1 # compiling with Object Space STL
-endif
-if ( $SYSTEM == "Linux" ) then
- setenv G4SYSTEM "Linux-g++"
-endif
-if ( $SYSTEM == "OSF1" ) then
- setenv G4SYSTEM "DEC-cxx"
- #setenv G4NO_STD_NAMESPACE 1 # compiling witn non ISO/ANSI setup
-endif
-if ( $SYSTEM == "SunOS" ) then
- setenv G4SYSTEM "SUN-CC"
- setenv G4USE_OSPACE 1 # compiling with Object Space STL
-endif
-if ( "$VERBOSE" == "YES" ) then
- echo "Architecture is $SYSTEM"
- echo "Geant4 is istalled in $G4INSTALL"
- echo "Geant4 architecture type is $G4SYSTEM"
- if ( "$?G4USE_OSPACE" == 1 ) then
- echo "ObjectSpace will be used for STL"
- endif
-endif
-
-
-#
-# CLHEP
-# ==================================
-#
-
-if ( -d $LHCXX_BASE/CLHEP/1.7.0.0 ) then
- setenv CLHEP_BASE_DIR $LHCXX_BASE/CLHEP/1.7.0.0
-else
- echo "WARNING: CLHEP has not been found in the default path."
- if ( "$VERBOSE" == "YES" ) then
- echo " Please set the variable CLHEP_BASE_DIR to its base path"
- echo " Example: setenv CLHEP_BASE_DIR /afs/cern.ch/sw/lhcxx/specific/@sys/CLHEP/pro"
- endif
-endif
-if ( "$VERBOSE" == "YES" ) then
- echo "CLHEP base directory: $CLHEP_BASE_DIR"
-endif
-
-
-#
-# Visualization
-# ==================================
-#
-
-if ( "$?AG4_VISUALIZE" == 1 ) then
- if ( "$VERBOSE" == "YES" ) then
- echo "G4 Visualization env. variables..."
- endif
-
- #
- # tcsh UI
- #
- if ( "$VERBOSE" == "YES" ) then
- echo "* tcsh UI..."
- endif
- setenv G4UI_USE_TCSH 1
-
- #
- # Xm UI
- #
- if ( "$VERBOSE" == "YES" ) then
- echo "* X11 with Motif..."
- endif
- setenv G4UI_BUILD_XM_DRIVER 1
- setenv G4UI_BUILD_XM_SESSION 1
- setenv G4UI_USE_XM 1
-
- #
- # Fukui Renderer
- #
- if ( "$VERBOSE" == "YES" ) then
- echo "* Fukui Renderer (DAWN)..."
- endif
- setenv G4VIS_BUILD_DAWN_DRIVER 1
- setenv G4VIS_USE_DAWN 1
- #setenv G4DAWNFILE_VIEWER david
- setenv DAWN_HOME ${G4_BASE}/tools/bin
- if ( "`echo ${PATH} | grep ${DAWN_HOME} `" == "" ) then
- setenv PATH "${PATH}:${DAWN_HOME}"
- rehash
- endif
- setenv G4DAWN_MULTI_WINDOW 1
- if ( $SYSTEM == "Linux" ) then
- setenv G4DAWN_NAMED_PIPE 1
- endif
-
- if ( "$VERBOSE" == "YES" ) then
- if ("$?G4VIS_USE_DAWN" == 1) then
- echo " Dawn driver activated"
- endif
- if ("$?G4DAWNFILE_VIEWER" == 1) then
- echo " Dawn file viewer set to ${G4DAWNFILE_VIEWER}"
- endif
- if ("$?DAWN_HOME" == 1) then
- echo " Dawn home path set to ${DAWN_HOME}"
- endif
- if ("$?G4DAWN_MULTI_WINDOW" == 1) then
- echo " Dawn multi window selected"
- endif
- if ("$?G4DAWN_NAMED_PIPE" == 1) then
- echo " Dawn named pipe selected"
- endif
- endif
-
- # David flags
- # Set colors for overlappings
- setenv DAVID_RAINBOW_FLAG 1
- #setenv DAVID_HIGHLIGHT_COLOR_R r
- #setenv DAVID_HIGHLIGHT_COLOR_G g
- #setenv DAVID_HIGHLIGHT_COLOR_B b
-
- # If set volumes names are shown
- setenv DAVID_DISPLAY_PVNAME 1
- # If set supresses the call to dawn
- #setenv DAVID_NO_VIEW 1
- setenv DAVID_EPSILON_3D 0.001
-
- if ( "$VERBOSE" == "YES" ) then
- if ("$?DAVID_RAINBOW_FLAG" == 1) then
- echo " DAVID Rainbow mode is ON"
- endif
- if ("$?DAVID_HIGHLIGHT_COLOR_R" == 1) then
- echo " DAVID Highlight color (Red) set to ${DAVID_HIGHLIGHT_COLOR_R}"
- endif
- if ("$?DAVID_HIGHLIGHT_COLOR_G" == 1) then
- echo " DAVID Highlight color (Green) set to ${DAVID_HIGHLIGHT_COLOR_G}"
- endif
- if ("$?DAVID_HIGHLIGHT_COLOR_B" == 1) then
- echo " DAVID Highlight color (Blue) set to ${DAVID_HIGHLIGHT_COLOR_B}"
- endif
- if ("$?DAVID_DISPLAY_PVNAME" == 1) then
- echo " DAVID will display intersected volumes name"
- endif
- if ("$?DAVID_DISPLAY_PVNAME" == 1) then
- echo " Dawn will not be called from DAVID"
- endif
- if ("$?DAVID_EPSILON_3D" == 1) then
- echo " DAVID tolerance set to ${DAVID_EPSILON_3D}"
- endif
- endif
-
- #
- # OpenGL
- #
- if ( "$VERBOSE" == "YES" ) then
- echo "* OpenGL..."
- endif
- setenv G4VIS_BUILD_OPENGLX_DRIVER 1
- setenv G4VIS_BUILD_OPENGLXM_DRIVER 1
- setenv G4VIS_USE_OPENGLX 1
- setenv G4VIS_USE_OPENGLXM 1
- setenv OGLHOME /usr/local
- setenv OGLLIBS "-L$OGLHOME/lib -lMesaGLU -lMesaGL"
- if ( $SYSTEM == "HP-UX" ) then
- setenv OGLLIBS "-L/usr/lib ${OGLLIBS}"
- endif
- if ( $SYSTEM == "OSF1" ) then
- # temporarily excluded
- # due to problems with Root
- unsetenv G4VIS_BUILD_OPENGLX_DRIVER
- unsetenv G4VIS_BUILD_OPENGLXM_DRIVER
- unsetenv G4VIS_USE_OPENGLX
- unsetenv G4VIS_USE_OPENGLXM
- unsetenv OGLHOME
- unsetenv OGLLIBS
- endif
- if ( "$VERBOSE" == "YES" ) then
- if ("$?G4VIS_USE_OPENGLX" == 1) then
- echo " OpenGL and X11 driver activated"
- endif
- if ("$?G4VIS_USE_OPENGLXM" == 1) then
- echo " OpenGL with Motif extension driver activated"
- endif
- if ("$?OGLHOME" == 1) then
- echo " OpenGL path set to ${OGLHOME}"
- endif
- if ("$?OGLLIBS" == 1) then
- echo " OpenGL libraries set to ${OGLLIBS}"
- endif
- endif
-
- #
- # OpenInventor
- #
- if ( "$VERBOSE" == "YES" ) then
- echo "* OpenInventor..."
- endif
- #setenv G4VIS_USE_OPENINVENTOR 1
- #setenv OIHOME whatever
- #setenv HEPVISDIR something
- if ( "$VERBOSE" == "YES" ) then
- if ("$?G4VIS_USE_OPENINVENTOR" == 1) then
- echo " OpenInventor driver activated"
- echo " OpenInventor path is ${OIHOME}"
- echo " HepVis path is ${HEPVISDIR}"
- endif
- endif
-
- #
- # VRML1
- #
- if ( "$VERBOSE" == "YES" ) then
- echo "* VRML..."
- endif
- setenv G4VIS_BUILD_VRML_DRIVER 1
- setenv G4VIS_USE_VRML 1
- #Set preferred vrml viewer to be invoked in this mode
- setenv G4VRMLFILE_VIEWER vrweb
- #Set host name for VRML1 visualization.... the g4vrmlview machine!
- setenv G4VRML_HOST_NAME nohost
- #Command to run java listener for VRML driver
- #alias javavrml "java -classpath $G4_BASE/tools/bin/java g4vrmlview vrweb"
-
- if ( "$VERBOSE" == "YES" ) then
- if ("$?G4VIS_USE_VRML" == 1) then
- echo " VRML driver activated"
- echo " Host Name for remote visualization is ${G4VRML_HOST_NAME}"
- endif
- endif
-
- #
- # GAG
- #
- if ( "$VERBOSE" == "YES" ) then
- echo "* Geant Adaptative GUI (GAG)..."
- endif
- setenv G4UI_USE_GAG 1
- setenv MOMOPATH ${G4_BASE}/tools/GAG/tcltk
- if ( "`echo ${PATH} | grep ${MOMOPATH} `" == "" ) then
- setenv PATH "${PATH}:${MOMOPATH}"
- rehash
- endif
- set NCLASSPATH = ".:${G4_BASE}/tools/swing-1.0.3/swingall.jar:${G4_BASE}/tools/GAG/java/GAG.jar"
- if ("$?CLASSPATH" == 0) then
- setenv CLASSPATH $NCLASSPATH
- else
- if ( "`echo ${CLASSPATH} | grep ${NCLASSPATH} `" == "" ) then
- setenv CLASSPATH "${CLASSPATH}:${NCLASSPATH}"
- endif
- endif
-
- if ( "$VERBOSE" == "YES" ) then
- if ("$?G4UI_USE_GAG" == 1) then
- echo " GAG UI activated"
- echo " Momo path set to $MOMOPATH"
- echo " NOTE: Run "\'tmomo\' "to use Momo (TK/Tcl version)"
- echo " The path to the java GAG code was updated"
- echo " NOTE: Run "\'java gag\'" to use GAG (java version)"
- endif
- endif
-
-else
- if ( "$VERBOSE" == "YES" ) then
- echo Unsetting G4 Visualization env. variables...
- endif
-
- #XM
- unsetenv G4UI_BUILD_XM_DRIVER
- unsetenv G4UI_BUILD_XM_SESSION
- unsetenv G4UI_USE_XM
-
- # Dawn
- unsetenv G4VIS_BUILD_DAWN_DRIVER
- unsetenv G4VIS_USE_DAWN
- unsetenv G4DAWNFILE_VIEWER
- unsetenv DAWN_HOME
- unsetenv G4DAWN_MULTI_WINDOW
- if ( $SYSTEM == "Linux" ) then
- unsetenv G4DAWN_NAMED_PIPE
- endif
-
- # David
- unsetenv DAVID_RAINBOW_FLAG
- unsetenv DAVID_HIGHLIGHT_COLOR_R
- unsetenv DAVID_HIGHLIGHT_COLOR_G
- unsetenv DAVID_HIGHLIGHT_COLOR_B
- unsetenv DAVID_DISPLAY_PVNAME
- unsetenv DAVID_NO_VIEW
- unsetenv DAVID_EPSILON_3D
-
- # OpenGL
- unsetenv G4VIS_BUILD_OPENGLX_DRIVER
- unsetenv G4VIS_BUILD_OPENGLXM_DRIVER
- unsetenv G4VIS_USE_OPENGLX
- unsetenv G4VIS_USE_OPENGLXM
- unsetenv OGLHOME
- unsetenv OGLLIBS
-
- # OpenInventor
- unsetenv G4VIS_USE_OPENINVENTOR
-
- # VRML1
- unsetenv G4VIS_BUILD_VRML_DRIVER
- unsetenv G4VIS_USE_VRML
- unsetenv G4VRMLFILE_VIEWER
- unsetenv G4VRML_HOST_NAME
-
- # GAG
- unsetenv G4UI_USE_GAG
- unsetenv MOMOPATH
-
-endif
-
-#
-# OPACS
-#
-if ( "$?AG4_OPACS" == 1 ) then
- if ( "$VERBOSE" == "YES" ) then
- echo "* OPACS..."
- endif
- setenv AG4_VISUALIZE 1
-
- #
- # OpenGL: needed by OPACS
- #
- setenv G4VIS_BUILD_OPENGLX_DRIVER 1
- setenv G4VIS_USE_OPENGLX 1
- setenv OGLHOME /usr/local
- setenv OGLLIBS "-L$OGLHOME/lib -lMesaGLU -lMesaGL"
- if ( $SYSTEM == "HP-UX" ) then
- setenv OGLLIBS "-L/usr/lib ${OGLLIBS}"
- endif
-
- #
- # OPACS
- #
- setenv G4VIS_BUILD_OPACS_DRIVER 1
- setenv G4UI_BUILD_WO_DRIVER 1
- setenv G4UI_BUILD_WO_SESSION 1
- setenv G4VIS_USE_OPACS 1
- setenv G4UI_USE_WO 1
- setenv OPACS_HOME $G4_BASE/tools/OPACS
- #setenv OPACS_HOME /afs/cern.ch/rd44/dev/OPACS
- if ( $SYSTEM == "Linux" ) then
- setenv G4_OPACS_WIDGET_SET lesstif
- else
- setenv G4_OPACS_WIDGET_SET Xm
- endif
- source $OPACS_HOME/OPACS/v3/setup.csh
- setenv WOENVIRONMENT $AG4_INSTALL/bin/Alice.odb
- setenv OPATH "$OPATH $G4INSTALL/environments/OPACS/usr"
- if ( "$VERBOSE" == "YES" ) then
- if ("$?G4VIS_USE_OPACS" == 1) then
- echo " OPACS driver activated"
- echo " OPACS path set to $OPACS_HOME"
- endif
- endif
-else
- if ( "$VERBOSE" == "YES" ) then
- echo "* Unsetting OPACS driver env. variables ..."
- endif
- unsetenv G4VIS_BUILD_OPACS_DRIVER
- unsetenv G4UI_BUILD_WO_DRIVER
- unsetenv G4UI_BUILD_WO_SESSION
- unsetenv G4VIS_USE_OPACS
- unsetenv G4UI_USE_WO
- unsetenv OPACS_HOME
- unsetenv G4_OPACS_WIDGET_SET
- unsetenv G4OROOT
- unsetenv WOENVIRONMENT
- unsetenv OPATH
-endif
-
-#
-# path to AliGeant4 config scripts
-#
-if ( "`echo ${PATH} | grep ${AG4_INSTALL}/config `" == "" ) then
- if ( "$VERBOSE" == "YES" ) then
- echo Adding ${AG4_INSTALL}/config to the path...
- endif
- setenv PATH "${PATH}:${AG4_INSTALL}/config"
-endif
+setenv MCINSTALL $ALICE/geant4vmc
+setenv SYSTEM `uname`
#
# path to shared libraries
#
-if ( $SYSTEM == "HP-UX" ) then
- set SHLIBVAR = $SHLIB_PATH
- set SHLIBVARNAME = SHLIB_PATH
-endif
-if ( $SYSTEM == "Linux" ) then
- set SHLIBVAR = $LD_LIBRARY_PATH
- set SHLIBVARNAME = LD_LIBRARY_PATH
+if ( "$SYSTEM" == "HP-UX" ) then
+ set SHLIBVAR=$SHLIB_PATH
+ set SHLIBVARNAME=SHLIB_PATH
+endif
+if ( "$SYSTEM" == "Linux" ) then
+ set SHLIBVAR=$LD_LIBRARY_PATH
+ set SHLIBVARNAME=LD_LIBRARY_PATH
endif
-if ( $SYSTEM == "OSF1" ) then
- set SHLIBVAR = $LD_LIBRARY_PATH
- set SHLIBVARNAME = LD_LIBRARY_PATH
+if ( "$SYSTEM" == "OSF1" ) then
+ set SHLIBVAR=$LD_LIBRARY_PATH
+ set SHLIBVARNAME=LD_LIBRARY_PATH
endif
-if ( $SYSTEM == "SunOS" ) then
- set SHLIBVAR = $LD_LIBRARY_PATH
- set SHLIBVARNAME = LD_LIBRARY_PATH
+if ( "$SYSTEM" == "SunOS" ) then
+ set SHLIBVAR=$LD_LIBRARY_PATH
+ set SHLIBVARNAME=LD_LIBRARY_PATH
endif
if ( "`echo ${SHLIBVAR} | grep ${G4INSTALL}/lib/${G4SYSTEM} `" == "" ) then
- if ( "$VERBOSE" == "YES" ) then
- echo Adding ${G4INSTALL}/lib/${G4SYSTEM} to the shared libraries path...
- endif
- set SHLIBVAR="${G4INSTALL}/lib/${G4SYSTEM}:${SHLIBVAR}"
+ set SHLIBVAR="${SHLIBVAR}:${G4INSTALL}/lib/${G4SYSTEM}"
+endif
+if ( "`echo ${SHLIBVAR} | grep ${MCINSTALL}/lib/tgt_${G4SYSTEM} `" == "" ) then
+ set SHLIBVAR="${SHLIBVAR}:${MCINSTALL}/lib/tgt_${G4SYSTEM}"
endif
if ( "`echo ${SHLIBVAR} | grep ${CLHEP_BASE_DIR}/lib `" == "" ) then
- if ( "$VERBOSE" == "YES" ) then
- echo Adding ${CLHEP_BASE_DIR}/lib to the shared libraries path...
- endif
set SHLIBVAR="${SHLIBVAR}:${CLHEP_BASE_DIR}/lib"
endif
setenv $SHLIBVARNAME $SHLIBVAR
-
#
# Remove unneeded variables. If this is not done the vars. remain in the env.
#
-unset ALICE_BASE
-unset G4_BASE
-unset LHCXX_BASE
-unset SYSTEM
-unset NCLASSPATH
+unsetenv SYSTEM
unset SHLIBVAR
unset SHLIBVARNAME
-unset LOCAL
-unset VERBOSE
-
-if ( "$SILENT" == "NO" ) then
- echo "Default ALICE environment for GEANT4 has been set."
-endif
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff