+++ /dev/null
-/**************************************************************************
- * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
- * *
- * Author: The ALICE Off-line Project. *
- * Contributors are mentioned in the code where appropriate. *
- * *
- * Permission to use, copy, modify and distribute this software and its *
- * documentation strictly for non-commercial purposes is hereby granted *
- * without fee, provided that the above copyright notice appears in all *
- * copies and that both the copyright notice and this permission notice *
- * appear in the supporting documentation. The authors make no claims *
- * about the suitability of this software for any purpose. It is *
- * provided "as is" without express or implied warranty. *
- **************************************************************************/
-
-/* $Id$ */
-
-///////////////////////////////////////////////////////////////////////////////
-// EMCAL Preprocessor class. It runs by Shuttle at the end of the run,
-// calculates stuff to be posted in OCDB
-//
-// Author: Boris Polichtchouk, 4 October 2006
-// Adapted for EMCAL by Gustavo Conesa Balbastre, October 2006
-// Updated by David Silvermyr May 2008, based on TPC code
-///////////////////////////////////////////////////////////////////////////////
-
-//Root
-#include "TFile.h"
-#include "TTree.h"
-#include "TEnv.h"
-#include "TParameter.h"
-
-#include <TTimeStamp.h>
-
-//AliRoot
-#include "AliShuttleInterface.h"
-#include "AliEMCALPreprocessor.h"
-#include "AliLog.h"
-#include "AliDCSValue.h"
-#include "AliCDBMetaData.h"
-#include "AliEMCALTriggerTRUDCSConfig.h"
-#include "AliEMCALTriggerSTUDCSConfig.h"
-#include "AliEMCALTriggerDCSConfig.h"
-#include "AliCaloCalibPedestal.h"
-#include "AliCaloCalibSignal.h"
-#include "AliEMCALSensorTempArray.h"
-
-const Int_t kValCutTemp = 100; // discard temperatures > 100 degrees
-const Int_t kDiffCutTemp = 5; // discard temperature differences > 5 degrees
-const TString kPedestalRunType = "PEDESTAL"; // pedestal run identifier
-const TString kPhysicsRunType = "PHYSICS"; // physics run identifier
-const TString kStandAloneRunType = "STANDALONE_BC"; // standalone run identifier
-const TString kAmandaTemp = "PT_%02d.Temperature"; // Amanda string for temperature entries
-//const Double_t kFitFraction = 0.7; // Fraction of DCS sensor fits required
-const Double_t kFitFraction = -1.0; // Don't require minimum number of fits during commissioning
-
-const TString kMetaResponsible = "David Silvermyr";
-//legacy comments and return codes from TPC
-const TString kMetaComment = "Preprocessor AliEMCAL data base entries.";
-const int kReturnCodeNoInfo = 9;
-const int kReturnCodeNoObject = 2;
-const int kReturnCodeNoEntries = 1;
-
-const int kNTRU = 62; // EMCAL (10 SM + 2/3) + (DCAL 10 SM) * 3 TRU per SM
-
-ClassImp(AliEMCALPreprocessor)
-
-//_______________________________________________________________________________________
-AliEMCALPreprocessor::AliEMCALPreprocessor() :
- AliPreprocessor("EMC",0),
- fConfEnv(0),
- fTemp(0),
- fConfigOK(kTRUE)
-{
- //default constructor
-}
-
-//_______________________________________________________________________________________
-AliEMCALPreprocessor::AliEMCALPreprocessor(AliShuttleInterface* shuttle):
- AliPreprocessor("EMC",shuttle),
- fConfEnv(0),
- fTemp(0),
- fConfigOK(kTRUE)
-{
- // Constructor AddRunType(kPedestalRunType);
-
- // define run types to be processed
- AddRunType(kPedestalRunType);
- AddRunType(kPhysicsRunType);
-}
-
-//______________________________________________________________________________________________
-AliEMCALPreprocessor::AliEMCALPreprocessor(const AliEMCALPreprocessor& ) :
- AliPreprocessor("EMCAL",0),
- fConfEnv(0), fTemp(0), fConfigOK(kTRUE)
-{
- Fatal("AliEMCALPreprocessor", "copy constructor not implemented");
-}
-
-// assignment operator; use copy ctor to make life easy.
-//______________________________________________________________________________________________
-AliEMCALPreprocessor& AliEMCALPreprocessor::operator = (const AliEMCALPreprocessor &source )
-{
- // assignment operator; use copy ctor
- if (&source == this) return *this;
-
- new (this) AliEMCALPreprocessor(source);
- return *this;
-}
-
-//____________________________________________________________________________
-AliEMCALPreprocessor::~AliEMCALPreprocessor()
-{
- // destructor
- if (fTemp) delete fTemp;
-}
-
-//______________________________________________________________________________________________
-void AliEMCALPreprocessor::Initialize(Int_t run, UInt_t startTime,
- UInt_t endTime)
-{
- // Creates AliTestDataDCS object -- start maps half an hour beforre actual run start
- UInt_t startTimeLocal = startTime-1800;
- AliPreprocessor::Initialize(run, startTimeLocal, endTime);
-
- AliInfo(Form("\n\tRun %d \n\tStartTime %s \n\tEndTime %s", run,
- TTimeStamp((time_t)startTime,0).AsString(),
- TTimeStamp((time_t)endTime,0).AsString()));
-
- // Preprocessor configuration
- AliCDBEntry* entry = GetFromOCDB("Config", "Preprocessor");
- if (entry) fConfEnv = (TEnv*) entry->GetObject();
- if ( fConfEnv==0 ) {
- Log("AliEMCALPreprocessor: Preprocessor Config OCDB entry missing.\n");
- fConfigOK = kFALSE;
- return;
- }
-
- // Temperature sensors
- TTree *confTree = 0;
-
- TString tempConf = fConfEnv->GetValue("Temperature","ON");
- tempConf.ToUpper();
- if (tempConf != "OFF" ) {
- entry = GetFromOCDB("Config", "Temperature");
- if (entry) confTree = (TTree*) entry->GetObject();
- if ( confTree==0 ) {
- Log("AliEMCALPreprocessor: Temperature Config OCDB entry missing.\n");
- fConfigOK = kFALSE;
- return;
- }
- fTemp = new AliEMCALSensorTempArray(startTimeLocal, fEndTime, confTree, kAmandaTemp);
- fTemp->SetValCut(kValCutTemp);
- fTemp->SetDiffCut(kDiffCutTemp);
- }
-
- return;
-}
-
-//______________________________________________________________________________________________
-UInt_t AliEMCALPreprocessor::Process(TMap* dcsAliasMap)
-{
- // Fills data into EMCAL calibrations objects
- // Amanda servers provide information directly through dcsAliasMap
-
- if (!fConfigOK) return kReturnCodeNoInfo;
- UInt_t result = 0;
- TObjArray *resultArray = new TObjArray();
- TString errorHandling = fConfEnv->GetValue("ErrorHandling","ON");
- errorHandling.ToUpper();
- TObject * status;
-
- UInt_t dcsResult=0;
- if (errorHandling == "OFF" ) {
- if (!dcsAliasMap) dcsResult = kReturnCodeNoEntries;
- else if (dcsAliasMap->GetEntries() == 0 ) dcsResult = kReturnCodeNoEntries;
- status = new TParameter<int>("dcsResult",dcsResult);
- resultArray->Add(status);
- }
- else {
- if (!dcsAliasMap) return kReturnCodeNoInfo;
- else if (dcsAliasMap->GetEntries() == 0 ) return kReturnCodeNoInfo;
- }
-
-
- TString runType = GetRunType();
-
- // Temperature sensors are processed by AliEMCALCalTemp
- TString tempConf = fConfEnv->GetValue("Temperature","ON");
- tempConf.ToUpper();
- if (tempConf != "OFF" && dcsAliasMap ) {
- UInt_t tempResult = MapTemperature(dcsAliasMap);
- result=tempResult;
- status = new TParameter<int>("tempResult",tempResult);
- resultArray->Add(status);
- }
- // Trigger configuration processing: only for Physics runs
- TString triggerConf = fConfEnv->GetValue("Trigger","ON");
- triggerConf.ToUpper();
- if( runType == kPhysicsRunType ) {
- if (triggerConf != "OFF" && dcsAliasMap ) {
- UInt_t triggerResult = MapTriggerConfig(dcsAliasMap);
- result+=triggerResult;
- status = new TParameter<int>("triggerResult",triggerResult);
- resultArray->Add(status);
- }
- }
-
- // Other calibration information will be retrieved through FXS files
- // examples:
- // TList* fileSourcesDAQ = GetFile(AliShuttleInterface::kDAQ, "pedestals");
- // const char* fileNamePed = GetFile(AliShuttleInterface::kDAQ, "pedestals", "LDC1");
- //
- // TList* fileSourcesHLT = GetFile(AliShuttleInterface::kHLT, "calib");
- // const char* fileNameHLT = GetFile(AliShuttleInterface::kHLT, "calib", "LDC1");
-
- // PEDESTAL ENTRIES:
-
- if ( runType == kPedestalRunType ) {
- Int_t numSources = 1;
- Int_t pedestalSource[2] = {AliShuttleInterface::kDAQ, AliShuttleInterface::kHLT} ;
- TString source = fConfEnv->GetValue("Pedestal","DAQ");
- source.ToUpper();
- if (source != "OFF" ) {
- if ( source == "HLT") pedestalSource[0] = AliShuttleInterface::kHLT;
- if (!GetHLTStatus()) pedestalSource[0] = AliShuttleInterface::kDAQ;
- if (source == "HLTDAQ" ) {
- numSources=2;
- pedestalSource[0] = AliShuttleInterface::kHLT;
- pedestalSource[1] = AliShuttleInterface::kDAQ;
- }
- if (source == "DAQHLT" ) numSources=2;
- UInt_t pedestalResult=0;
- for (Int_t i=0; i<numSources; i++ ) {
- pedestalResult = ExtractPedestals(pedestalSource[i]);
- if ( pedestalResult == 0 ) break;
- }
- result += pedestalResult;
- status = new TParameter<int>("pedestalResult",pedestalResult);
- resultArray->Add(status);
- }
- }
-
- // SIGNAL/LED ENTRIES:
- if( runType == kPhysicsRunType ) {
- Int_t numSources = 1;
- Int_t signalSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
- TString source = fConfEnv->GetValue("Signal","DAQ");
- source.ToUpper();
- if ( source != "OFF") {
- if ( source == "HLT") signalSource[0] = AliShuttleInterface::kHLT;
- if (!GetHLTStatus()) signalSource[0] = AliShuttleInterface::kDAQ;
- if (source == "HLTDAQ" ) {
- numSources=2;
- signalSource[0] = AliShuttleInterface::kHLT;
- signalSource[1] = AliShuttleInterface::kDAQ;
- }
- if (source == "DAQHLT" ) numSources=2;
- UInt_t signalResult=0;
- for (Int_t i=0; i<numSources; i++ ) {
- signalResult = ExtractSignal(signalSource[i]);
- if ( signalResult == 0 ) break;
- }
- result += signalResult;
- status = new TParameter<int>("signalResult",signalResult);
- resultArray->Add(status);
- }
- }
-
-
- // overall status at the end
- if (errorHandling == "OFF" ) {
- AliCDBMetaData metaData;
- metaData.SetBeamPeriod(0);
- metaData.SetResponsible(kMetaResponsible);
- metaData.SetComment("Preprocessor AliEMCAL status.");
- Bool_t storeOK = Store("Calib", "PreprocStatus", resultArray, &metaData, 0, kFALSE);
- resultArray->Delete();
- result = 0;
- if ( !storeOK ) result=1;
- return result;
- }
- else {
- return result;
- }
-
-}
-//______________________________________________________________________________________________
-UInt_t AliEMCALPreprocessor::MapTemperature(TMap* dcsAliasMap)
-{ // extract DCS temperature maps. Perform fits to save space
- UInt_t result=0;
-
- TMap *map = fTemp->ExtractDCS(dcsAliasMap);
- if (map) {
- fTemp->MakeSplineFit(map);
- Double_t fitFraction = 1.0*fTemp->NumFits()/fTemp->NumSensors();
- if (fitFraction > kFitFraction ) {
- AliInfo(Form("Temperature values extracted, fits performed.\n"));
- }
- else {
- Log ("Too few temperature maps fitted. \n");
- result = kReturnCodeNoInfo;
- }
- }
- else {
- Log("No temperature map extracted. \n");
- result = kReturnCodeNoInfo;
- }
- delete map;
- // Now store the final CDB file
-
- if ( result == 0 ) { // some info was found
- AliCDBMetaData metaData;
- metaData.SetBeamPeriod(0);
- metaData.SetResponsible(kMetaResponsible);
- metaData.SetComment(kMetaComment);
-
- Bool_t storeOK = Store("Calib", "Temperature", fTemp, &metaData, 0, kFALSE);
- if ( !storeOK ) result=1;
- AliInfo(Form("Temperature info stored. result %d\n", result));
- }
-
- return result;
-}
-
-//______________________________________________________________________________________________
-UInt_t AliEMCALPreprocessor::MapTriggerConfig(TMap* dcsAliasMap)
-{ // extract DCS trigger info
-
-
- AliInfo("Print DCS alias map content");
- dcsAliasMap->Print();
-
- AliInfo(Form("Get TRU info from DCS DPs.\n"));
- Int_t i, iTRU;
- const Int_t bufsize = 1000;
- char buf[bufsize];
-
- AliDCSValue *dcsVal;
- TObjArray *arrL0ALGSEL, *arrPEAKFINDER, *arrGLOBALTHRESH, *arrCOSMTHRESH;
- TObjArray *arrMASK[6];
-
- TObjArray *arrSTUG[3][2], *arrSTUJ[3][2];
- TObjArray *arrSTUD, *arrSTUR, *arrSTUF;
-
- // overall object to hold STU and DCS config info
- // DS comment: for now only holds TRU info, i.e. only partially filled
- // (STU info only in raw data header; unfortunately not also picked up via DCS DPs)
- AliEMCALTriggerDCSConfig *trigConfig = new AliEMCALTriggerDCSConfig();
- // allocate space for TRU objects
- TClonesArray *truArr = new TClonesArray("AliEMCALTriggerTRUDCSConfig", kNTRU);
- for( iTRU = 0; iTRU < kNTRU; iTRU++){
- new((*truArr)[iTRU]) AliEMCALTriggerTRUDCSConfig();
- }
- trigConfig->SetTRUArr(truArr);
-
- AliEMCALTriggerSTUDCSConfig *stuConfig = new AliEMCALTriggerSTUDCSConfig();
-
- // loop through all TRUs
- bool debug = true; // debug flag for AliInfo printouts for each TRU
- for( iTRU = 0; iTRU < kNTRU; iTRU++){
- if (debug) AliInfo( Form("iTRU %d \n", iTRU) );
- // get the shuttled values
- snprintf( buf, bufsize, "EMC_TRU%02d_L0ALGSEL", iTRU );
- arrL0ALGSEL = (TObjArray*) dcsAliasMap->GetValue( buf );
- snprintf( buf, bufsize, "EMC_TRU%02d_PEAKFINDER", iTRU );
- arrPEAKFINDER = (TObjArray*) dcsAliasMap->GetValue( buf );
- snprintf( buf, bufsize, "EMC_TRU%02d_GLOBALTHRESH", iTRU );
- arrGLOBALTHRESH = (TObjArray*) dcsAliasMap->GetValue( buf );
- snprintf( buf, bufsize, "EMC_TRU%02d_COSMTHRESH", iTRU );
- arrCOSMTHRESH = (TObjArray*) dcsAliasMap->GetValue( buf );
-
- for( i = 0; i < 6; i++ ){
- snprintf( buf, bufsize, "EMC_TRU%02d_MASK%d", iTRU, i );
- arrMASK[i] = (TObjArray*) dcsAliasMap->GetValue( buf );
- }
-
- // fill the objects
- AliEMCALTriggerTRUDCSConfig* truConfig = trigConfig->GetTRUDCSConfig(iTRU);
- if( ! truConfig ){
- AliWarning( Form("EMC TRU%02d config not retrieved!\n", iTRU ));
- continue;
- }
-
- // get last entries. fill the TRU object
- if( ! arrL0ALGSEL ){
- AliWarning( Form("EMC_TRU%02d_L0ALGSEL alias not found!\n", iTRU ));
- }
- else{
- if (debug) AliInfo( Form("arrL0ALGSEL has %d entries \n", arrL0ALGSEL->GetEntries()) );
- if ( arrL0ALGSEL->GetEntries() > 0 ) {
- dcsVal = (AliDCSValue *) arrL0ALGSEL->At( arrL0ALGSEL->GetEntries() - 1 );
- if (dcsVal) {
- truConfig->SetL0SEL( dcsVal->GetUInt() );
- if (debug) AliInfo( Form("saving value: %u\n", dcsVal->GetUInt()) );
- }
- }
- else
- AliWarning( Form("EMC_TRU%02d_L0ALGSEL has no entries!\n", iTRU ));
- }
-
- if( ! arrPEAKFINDER ){
- AliWarning( Form("EMC_TRU%02d_PEAKFINDER alias not found!\n", iTRU ));
- }
- else{
- if (debug) AliInfo( Form("arrPEAKFINDER has %d entries \n", arrPEAKFINDER->GetEntries()) );
- if ( arrPEAKFINDER->GetEntries() > 0 ) {
- dcsVal = (AliDCSValue *) arrPEAKFINDER->At( arrPEAKFINDER->GetEntries() - 1 );
- if (dcsVal){
- truConfig->SetSELPF( dcsVal->GetUInt() );
- if (debug) AliInfo( Form("saving value: %u\n", dcsVal->GetUInt()) );
- }
- }
- else
- AliWarning( Form("EMC_TRU%02d_PEAKFINDER has no entries!\n", iTRU ));
- }
-
- if( ! arrGLOBALTHRESH ){
- AliWarning( Form("EMC_TRU%02d_GLOBALTHRESH alias not found!\n", iTRU ));
- }
- else{
- if (debug) AliInfo( Form("arrGLOBALTHRESH has %d entries \n", arrGLOBALTHRESH->GetEntries()) );
- if ( arrGLOBALTHRESH->GetEntries() > 0 ) {
- dcsVal = (AliDCSValue *) arrGLOBALTHRESH->At( arrGLOBALTHRESH->GetEntries() - 1 );
- if (dcsVal){
- truConfig->SetGTHRL0( dcsVal->GetUInt() );
- if (debug) AliInfo( Form("saving value: %u\n", dcsVal->GetUInt()) );
- }
- }
- else
- AliWarning( Form("EMC_TRU%02d_GLOBALTHRESH has no entries!\n", iTRU ));
- }
-
- if( ! arrCOSMTHRESH ){
- AliWarning( Form("EMC_TRU%02d_COSMTHRESH alias not found!\n", iTRU ));
- }
- else{
- if (debug) AliInfo( Form("arrCOSMTHRESH has %d entries \n", arrCOSMTHRESH->GetEntries()) );
- if ( arrCOSMTHRESH->GetEntries() > 0 ) {
- dcsVal = (AliDCSValue *) arrCOSMTHRESH->At( arrCOSMTHRESH->GetEntries() - 1 );
- if (dcsVal){
- truConfig->SetL0COSM( dcsVal->GetUInt() );
- if (debug) AliInfo( Form("saving value: %u\n", dcsVal->GetUInt()) );
- }
- }
- else
- AliWarning( Form("EMC_TRU%02d_COSMTHRESH has no entries!\n", iTRU ));
- }
-
- for( i = 0; i < 6; i++ ){
- if( ! arrMASK[i] ){
- AliWarning( Form("EMC_TRU%02d_MASK%d alias not found!\n", iTRU, i ));
- }
- else{
- if (debug) AliInfo( Form("arrMASK[%d] has %d entries \n", i, arrMASK[i]->GetEntries()) );
- if ( arrMASK[i]->GetEntries() > 0 ) {
- dcsVal = (AliDCSValue *) arrMASK[i]->At( arrMASK[i]->GetEntries() - 1 );
- if (dcsVal){
- truConfig->SetMaskReg( dcsVal->GetUInt(), i );
- if (debug) AliInfo( Form("saving value: %u\n", dcsVal->GetUInt()) );
- }
- }
- else
- AliWarning( Form("EMC_TRU%02d_MASK%d has no entries!\n", iTRU, i ));
- }
- }
-
- } // TRUs
- AliInfo(Form("TRU info retrieved.\n"));
-
- // STU
- for (i = 0; i < 3; i++) {
- for (int j = 0; j < 2; j++) {
- arrSTUG[i][j] = (TObjArray*)dcsAliasMap->GetValue(Form("EMC_STU_G%c%d", i + 65, j));
- arrSTUJ[i][j] = (TObjArray*)dcsAliasMap->GetValue(Form("EMC_STU_J%c%d", i + 65, j));
-
- if (!arrSTUG[i][j]) {
- AliWarning(Form("EMC_STU_G%c%d alias not found!", i + 65, j));
- } else {
- if (debug) AliInfo( Form("EMC_STU_G%c%d has %d entries", i + 65, j, arrSTUG[i][j]->GetEntries()));
- if (arrSTUG[i][j]->GetEntries() > 0) {
- dcsVal = (AliDCSValue*)arrSTUG[i][j]->At(arrSTUG[i][j]->GetEntries() - 1);
- if (dcsVal) {
- stuConfig->SetG(i, j, dcsVal->GetInt());
- if (debug) AliInfo(Form("saving value: %u", dcsVal->GetInt()));
- }
- } else
- AliWarning(Form("EMC_STU_G%c%d has no entry!", i + 65, j));
- }
-
- if (!arrSTUJ[i][j]) {
- AliWarning(Form("EMC_STU_J%c%d alias not found!", i + 65, j));
- } else {
- if (debug) AliInfo( Form("EMC_STU_J%c%d has %d entries", i + 65, j, arrSTUJ[i][j]->GetEntries()));
- if (arrSTUJ[i][j]->GetEntries() > 0) {
- dcsVal = (AliDCSValue*)arrSTUJ[i][j]->At(arrSTUJ[i][j]->GetEntries() - 1);
- if (dcsVal) {
- stuConfig->SetJ(i, j, dcsVal->GetInt());
- if (debug) AliInfo(Form("saving value: %u", dcsVal->GetInt()));
- }
- } else
- AliWarning(Form("EMC_STU_J%c%d has no entry!", i + 65, j));
- }
- }
- }
-
- arrSTUD = (TObjArray*)dcsAliasMap->GetValue("EMC_STU_GETRAW");
- arrSTUR = (TObjArray*)dcsAliasMap->GetValue("EMC_STU_REGION");
- arrSTUF = (TObjArray*)dcsAliasMap->GetValue("EMC_STU_FWVERS");
-
- if (!arrSTUD) {
- AliWarning("EMC_STU_GETRAW alias not found!");
- } else {
- if (debug) AliInfo(Form("EMC_STU_GETRAW has %d entries", arrSTUD->GetEntries()));
- if (arrSTUD->GetEntries() > 0) {
- dcsVal = (AliDCSValue*)arrSTUD->At(arrSTUD->GetEntries() - 1);
- if (dcsVal) {
- stuConfig->SetRawData(dcsVal->GetInt());
- if (debug) AliInfo(Form("saving value: %u", dcsVal->GetInt()));
- }
- } else
- AliWarning("EMC_STU_GETRAW has no entry!");
- }
-
- if (!arrSTUR) {
- AliWarning("EMC_STU_REGION");
- } else {
- if (debug) AliInfo( Form("EMC_STU_REGION has %d entries", arrSTUR->GetEntries()));
- if (arrSTUR->GetEntries() > 0) {
- dcsVal = (AliDCSValue*)arrSTUR->At(arrSTUR->GetEntries() - 1);
- if (dcsVal) {
- stuConfig->SetRegion(dcsVal->GetInt());
- if (debug) AliInfo(Form("saving value: %u", dcsVal->GetInt()));
- }
- } else
- AliWarning("EMC_STU_REGION has no entry!");
- }
-
- if (!arrSTUF) {
- AliWarning("EMC_STU_FWVERS");
- } else {
- if (debug) AliInfo(Form("EMC_STU_FWVERS has %d entries", arrSTUF->GetEntries()));
- if (arrSTUF->GetEntries() > 0) {
- dcsVal = (AliDCSValue*)arrSTUF->At(arrSTUF->GetEntries() - 1);
- if (dcsVal) {
- stuConfig->SetFw(dcsVal->GetInt());
- if (debug) AliInfo(Form("saving value: %u", dcsVal->GetInt()));
- }
- } else
- AliWarning("EMC_STU_FWVERS has no entry!");
- }
-
- trigConfig->SetSTUObj(stuConfig);
-
- AliInfo(Form("STU info retrieved."));
-
-
- // save the objects
- AliCDBMetaData metaData;
- metaData.SetBeamPeriod(0);
- metaData.SetResponsible(kMetaResponsible);
- metaData.SetComment(kMetaComment);
-
- UInt_t result=0;
- Bool_t storeOK = Store("Calib", "Trigger", trigConfig, &metaData, 0, kFALSE);
- if ( !storeOK ) result=1;
- AliInfo(Form("TRU info stored. result %d\n", result));
-
- return result;
-}
-
-//______________________________________________________________________________________________
-UInt_t AliEMCALPreprocessor::ExtractPedestals(Int_t sourceFXS)
-{
- // Read pedestal file from file exchange server
- // Only store if new pedestal info is available
- //
- UInt_t result=0;
-
- AliCaloCalibPedestal *calibPed = new AliCaloCalibPedestal(AliCaloCalibPedestal::kEmCal);
- calibPed->Init();
-
- TList* list = GetFileSources(sourceFXS,"pedestals");
- if (list && list->GetEntries()>0) {
-
- // loop through all files from LDCs
-
- int changes = 0;
- UInt_t index = 0;
- while (list->At(index)!=NULL) {
- TObjString* fileNameEntry = (TObjString*) list->At(index);
- if (fileNameEntry!=NULL) {
- TString fileName = GetFile(sourceFXS, "pedestals",
- fileNameEntry->GetString().Data());
- TFile *f = TFile::Open(fileName);
- if (!f) {
- Log ("Error opening pedestal file.");
- result = kReturnCodeNoObject;
- break;
- }
- AliCaloCalibPedestal *calPed;
- f->GetObject("emcCalibPedestal",calPed);
- if ( !calPed ) {
- Log ("No pedestal calibration object in file.");
- result = kReturnCodeNoObject;
- break;
- }
- if ( calPed->GetNEvents()>0 && calPed->GetNChanFills()>0 ) {
- // add info for the modules available in the present file
- Bool_t status = calibPed->AddInfo(calPed);
- if (status) { changes++; }
- }
-
- delete calPed;
- f->Close();
- }
- index++;
- } // while(list)
-
- //
- // Store updated pedestal entry to OCDB
- //
- if (changes>0) {
- AliCDBMetaData metaData;
- metaData.SetBeamPeriod(0);
- metaData.SetResponsible(kMetaResponsible);
- metaData.SetComment(kMetaComment);
-
- Bool_t storeOK = StoreReferenceData("Calib", "Pedestals", calibPed, &metaData);
- if ( !storeOK ) result++;
- }
- }
- else {
- Log ("Error: no entries in input file list!");
- result = kReturnCodeNoEntries;
- }
-
- return result;
-}
-
-//______________________________________________________________________________________________
-UInt_t AliEMCALPreprocessor::ExtractSignal(Int_t sourceFXS)
-{ // Read signal file from file exchange server
- // Only store if new signal info is available
- //
- UInt_t result=0;
- AliCaloCalibSignal *calibSig = new AliCaloCalibSignal(AliCaloCalibSignal::kEmCal);
-
- TList* list = GetFileSources(sourceFXS,"signal");
- if (list && list->GetEntries()>0) {
-
- // loop through all files from LDCs
-
- int changes = 0;
- UInt_t index = 0;
- while (list->At(index)!=NULL) {
- TObjString* fileNameEntry = (TObjString*) list->At(index);
- if (fileNameEntry!=NULL) {
- TString fileName = GetFile(sourceFXS, "signal",
- fileNameEntry->GetString().Data());
- TFile *f = TFile::Open(fileName);
- if (!f) {
- Log ("Error opening signal file.");
- result = kReturnCodeNoObject;
- break;
- }
- AliCaloCalibSignal *calSig;
- f->GetObject("emcCalibSignal",calSig);
- if ( !calSig ) {
- Log ("No signal calibration object in file.");
- result = kReturnCodeNoObject;
- break;
- }
- if ( calSig->GetNEvents()>0 ) {
- // add info for the modules available in the present file
- Bool_t status = calibSig->AddInfo(calSig);
- if (status) { changes++; }
- }
-
- delete calSig;
- f->Close();
- }
- index++;
- } // while(list)
-
- //
- // Store updated signal entry to OCDB
- //
- if (changes>0) {
- AliCDBMetaData metaData;
- metaData.SetBeamPeriod(0);
- metaData.SetResponsible(kMetaResponsible);
- metaData.SetComment(kMetaComment);
-
- Bool_t storeOK = Store("Calib", "LED", calibSig, &metaData, 0, kFALSE);
- if ( !storeOK ) result++;
- }
- }
- else {
- Log ("Error: no entries in input file list!");
- result = kReturnCodeNoEntries;
- }
-
- return result;
-}
-
-