TString gn(g->GetName()); gn.ToUpper();
fShishKebabModules = g->GetShishKebabTrd1Modules();
fGeometry = g;
- fSampleWidth = double(g->GetECPbRadThick()+g->GetECScintThick());
+ fSampleWidth = Double_t(g->GetECPbRadThick()+g->GetECScintThick());
if(gn.Contains("V1")) fSampleWidth += 2.*g->GetTrd1BondPaperThick();
- AliDebug(2,Form("fGeometry %p : gMC %p : fSampleWidth %5.4f\n",
- fGeometry, gMC, fSampleWidth));
+ AliDebug(2,Form("fGeometry %p : TVirtualMC::GetMC() %p : fSampleWidth %5.4f\n",
+ fGeometry, TVirtualMC::GetMC(), fSampleWidth));
//Set geometry name again, in case it was changed during the initialization of the geometry.
SetTitle(fGeometry->GetEMCGeometry()->GetName());
fIdTmedArr = fIdtmed->GetArray() - 1599 ;
fIdRotm = 1;
- // gMC->Matrix(nmat, theta1, phi1, theta2, phi2, theta3, phi3) - see AliModule
+ // TVirtualMC::GetMC()->Matrix(nmat, theta1, phi1, theta2, phi2, theta3, phi3) - see AliModule
AliMatrix(fIdRotm, 90.0, 0., 90.0, 90.0, 0.0, 0.0) ;
// Create the EMCAL Mother Volume (a polygone) within which to place the Detector and named XEN1
envelopA[0] = 30.;
envelopA[1] = 30;
envelopA[2] = 20;
- gMC->Gsvolu("XEN1", "BOX", fIdTmedArr[kIdSC], envelopA, 3) ;
+ TVirtualMC::GetMC()->Gsvolu("XEN1", "BOX", fIdTmedArr[kIdSC], envelopA, 3) ;
fEnvelop1.Set(3);
- for(int i=0; i<3; i++) fEnvelop1[i] = envelopA[i]; // 23-may-05
+ for(Int_t i=0; i<3; i++) fEnvelop1[i] = envelopA[i]; // 23-may-05
// Position the EMCAL Mother Volume (XEN1) in WSUC.
// Look to AliEMCALWsuCosmicRaySetUp.
- gMC->Gspos("XEN1", 1, "WSUC", 0.0, 0.0, + 265., fIdRotm, "ONLY") ;
+ TVirtualMC::GetMC()->Gspos("XEN1", 1, "WSUC", 0.0, 0.0, + 265., fIdRotm, "ONLY") ;
} else {
envelopA[0] = geom->GetArm1PhiMin(); // minimum phi angle
envelopA[1] = geom->GetArm1PhiMax() - geom->GetArm1PhiMin(); // angular range in phi
envelopA[8] = envelopA[5] ; // radii are the same.
envelopA[9] = envelopA[6] ; // radii are the same.
- gMC->Gsvolu("XEN1", "PGON", fIdTmedArr[kIdAIR], envelopA, 10) ; // Polygone filled with air
+ TVirtualMC::GetMC()->Gsvolu("XEN1", "PGON", fIdTmedArr[kIdAIR], envelopA, 10) ; // Polygone filled with air
fEnvelop1.Set(10, envelopA);
if (gDebug==2) {
printf("CreateGeometry: XEN1 = %f, %f\n", envelopA[5], envelopA[6]);
printf("CreateGeometry: XU0 = %f, %f\n", envelopA[5], envelopA[6]);
}
// Position the EMCAL Mother Volume (XEN1) in Alice (ALIC)
- gMC->Gspos(geom->GetNameOfEMCALEnvelope(), 1, "ALIC", 0.0, 0.0, 0.0, fIdRotm, "ONLY") ;
+ TVirtualMC::GetMC()->Gspos(geom->GetNameOfEMCALEnvelope(), 1, "ALIC", 0.0, 0.0, 0.0, fIdRotm, "ONLY") ;
}
// COMPACT, TRD1
Double_t trd1Angle = g->GetTrd1Angle()*TMath::DegToRad(), tanTrd1 = TMath::Tan(trd1Angle/2.);
// see AliModule::fFIdTmedArr
// fIdTmedArr = fIdtmed->GetArray() - 1599 ; // see AliEMCAL::::CreateMaterials()
- // int kIdAIR=1599, kIdPB = 1600, kIdSC = 1601, kIdSTEEL = 1603;
+ // Int_t kIdAIR=1599, kIdPB = 1600, kIdSC = 1601, kIdSTEEL = 1603;
// idAL = 1602;
Double_t par[10], xpos=0., ypos=0., zpos=0.;
Int_t * SMTypeList = g->GetEMCSystem();
Int_t tmpType = -1;
- for(int i = 0 ; i < g->GetNumberOfSuperModules(); i++) {
+ for(Int_t i = 0 ; i < g->GetNumberOfSuperModules(); i++) {
if( SMTypeList[i] == tmpType) continue;
else tmpType = SMTypeList[i];
}
// Sensitive SC (2x2 tiles)
- double parSCM0[5]={0,0,0,0}, *dummy = 0, parTRAP[11];
+ Double_t parSCM0[5]={0,0,0,0}, *dummy = 0, parTRAP[11];
if(!gn.Contains("V1")) {
- double wallThickness = g->GetPhiModuleSize()/g->GetNPHIdiv() - g->GetPhiTileSize();
- for(int i=0; i<3; i++) parSCM0[i] = fParEMOD[i] - wallThickness;
+ Double_t wallThickness = g->GetPhiModuleSize()/g->GetNPHIdiv() - g->GetPhiTileSize();
+ for(Int_t i=0; i<3; i++) parSCM0[i] = fParEMOD[i] - wallThickness;
parSCM0[3] = fParEMOD[3];
- gMC->Gsvolu("SCM0", "TRD1", fIdTmedArr[kIdAIR], parSCM0, 4);
- gMC->Gspos("SCM0", 1, "EMOD", 0., 0., 0., 0, "ONLY") ;
+ TVirtualMC::GetMC()->Gsvolu("SCM0", "TRD1", fIdTmedArr[kIdAIR], parSCM0, 4);
+ TVirtualMC::GetMC()->Gspos("SCM0", 1, "EMOD", 0., 0., 0., 0, "ONLY") ;
} else {
- double wTh = g->GetLateralSteelStrip();
+ Double_t wTh = g->GetLateralSteelStrip();
parSCM0[0] = fParEMOD[0] - wTh + tanTrd1*g->GetTrd1AlFrontThick();
parSCM0[1] = fParEMOD[1] - wTh;
parSCM0[2] = fParEMOD[2] - wTh;
parSCM0[3] = fParEMOD[3] - g->GetTrd1AlFrontThick()/2.;
- gMC->Gsvolu("SCM0", "TRD1", fIdTmedArr[kIdAIR], parSCM0, 4);
- double zshift = g->GetTrd1AlFrontThick()/2.;
- gMC->Gspos("SCM0", 1, "EMOD", 0., 0., zshift, 0, "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("SCM0", "TRD1", fIdTmedArr[kIdAIR], parSCM0, 4);
+ Double_t zshift = g->GetTrd1AlFrontThick()/2.;
+ TVirtualMC::GetMC()->Gspos("SCM0", 1, "EMOD", 0., 0., zshift, 0, "ONLY");
//
CreateAlFrontPlate("EMOD","ALFP");
}
if(g->GetNPHIdiv()==2 && g->GetNETAdiv()==2) {
// Division to tile size - 1-oct-04
AliDebug(2,Form(" Divide SCM0 on y-axis %i\n", g->GetNETAdiv()));
- gMC->Gsdvn("SCMY","SCM0", g->GetNETAdiv(), 2); // y-axis
+ TVirtualMC::GetMC()->Gsdvn("SCMY","SCM0", g->GetNETAdiv(), 2); // y-axis
// Trapesoid 2x2
parTRAP[0] = parSCM0[3]; // dz
parTRAP[1] = TMath::ATan2((parSCM0[1]-parSCM0[0])/2.,2.*parSCM0[3])*180./TMath::Pi(); // theta
parTRAP[9] = parTRAP[8]; // TL2
parTRAP[10]= 0.0; // ALP2
AliDebug(2,Form(" ** TRAP ** \n"));
- for(int i=0; i<11; i++) AliDebug(3, Form(" par[%2.2i] %9.4f\n", i, parTRAP[i]));
+ for(Int_t i=0; i<11; i++) AliDebug(3, Form(" par[%2.2i] %9.4f\n", i, parTRAP[i]));
- gMC->Gsvolu("SCMX", "TRAP", fIdTmedArr[kIdSC], parTRAP, 11);
+ TVirtualMC::GetMC()->Gsvolu("SCMX", "TRAP", fIdTmedArr[kIdSC], parTRAP, 11);
xpos = +(parSCM0[1]+parSCM0[0])/4.;
- gMC->Gspos("SCMX", 1, "SCMY", xpos, 0.0, 0.0, 0, "ONLY") ;
+ TVirtualMC::GetMC()->Gspos("SCMX", 1, "SCMY", xpos, 0.0, 0.0, 0, "ONLY") ;
// Using rotation because SCMX should be the same due to Pb tiles
xpos = -xpos;
AliMatrix(fIdRotm, 90.0,180., 90.0, 270.0, 0.0,0.0) ;
- gMC->Gspos("SCMX", 2, "SCMY", xpos, 0.0, 0.0, fIdRotm, "ONLY");
+ TVirtualMC::GetMC()->Gspos("SCMX", 2, "SCMY", xpos, 0.0, 0.0, fIdRotm, "ONLY");
// put LED to the SCM0
AliEMCALShishKebabTrd1Module *mod = (AliEMCALShishKebabTrd1Module*)fShishKebabModules->At(0);
Double_t tanBetta = mod->GetTanBetta();
- int nr=0;
+ Int_t nr=0;
ypos = 0.0;
- double xCenterSCMX = (parTRAP[4] + parTRAP[8])/2.;
+ Double_t xCenterSCMX = (parTRAP[4] + parTRAP[8])/2.;
if(!gn.Contains("V1")) {
par[1] = parSCM0[2]/2; // y
par[2] = g->GetECPbRadThick()/2.; // z
- gMC->Gsvolu("PBTI", "BOX", fIdTmedArr[kIdPB], dummy, 0);
+ TVirtualMC::GetMC()->Gsvolu("PBTI", "BOX", fIdTmedArr[kIdPB], dummy, 0);
zpos = -fSampleWidth*g->GetNECLayers()/2. + g->GetECPbRadThick()/2.;
AliDebug(2,Form(" Pb tiles \n"));
- for(int iz=0; iz<g->GetNECLayers(); iz++){
+ for(Int_t iz=0; iz<g->GetNECLayers(); iz++){
par[0] = (parSCM0[0] + tanBetta*fSampleWidth*iz)/2.;
xpos = par[0] - xCenterSCMX;
- gMC->Gsposp("PBTI", ++nr, "SCMX", xpos, ypos, zpos, 0, "ONLY", par, 3) ;
+ TVirtualMC::GetMC()->Gsposp("PBTI", ++nr, "SCMX", xpos, ypos, zpos, 0, "ONLY", par, 3) ;
AliDebug(3,Form(" %i xpos %f zpos %f par[0] %f \n", iz+1, xpos, zpos, par[0]));
zpos += fSampleWidth;
}
par[1] = parSCM0[2]/2.; // y
par[2] = g->GetTrd1BondPaperThick()/2.; // z
par[0] = parSCM0[0]/2.; // x
- gMC->Gsvolu("PAP1", "BOX", fIdTmedArr[kIdPAPER], par, 3);
+ TVirtualMC::GetMC()->Gsvolu("PAP1", "BOX", fIdTmedArr[kIdPAPER], par, 3);
xpos = par[0] - xCenterSCMX;
zpos = -parSCM0[3] + g->GetTrd1BondPaperThick()/2.;
- gMC->Gspos("PAP1", 1, "SCMX", xpos, ypos, zpos, 0, "ONLY");
- for(int iz=0; iz<g->GetNECLayers()-1; iz++){
+ TVirtualMC::GetMC()->Gspos("PAP1", 1, "SCMX", xpos, ypos, zpos, 0, "ONLY");
+ for(Int_t iz=0; iz<g->GetNECLayers()-1; iz++){
nr = iz + 1;
Double_t dz = g->GetECScintThick() + g->GetTrd1BondPaperThick() + fSampleWidth*iz;
- // PB + 2 paper sheets
+ // PB + 2 paper sheets
par[2] = g->GetECPbRadThick()/2. + g->GetTrd1BondPaperThick(); // z
par[0] = (parSCM0[0] + tanBetta*dz)/2.;
TString pa(Form("PA%2.2i",nr));
- gMC->Gsvolu(pa.Data(), "BOX", fIdTmedArr[kIdPAPER], par, 3);
+ TVirtualMC::GetMC()->Gsvolu(pa.Data(), "BOX", fIdTmedArr[kIdPAPER], par, 3);
xpos = par[0] - xCenterSCMX;
zpos = -parSCM0[3] + dz + par[2];
- gMC->Gspos(pa.Data(), 1, "SCMX", xpos, ypos, zpos, 0, "ONLY") ;
- // Pb
+ TVirtualMC::GetMC()->Gspos(pa.Data(), 1, "SCMX", xpos, ypos, zpos, 0, "ONLY") ;
+ // Pb
TString pb(Form("PB%2.2i",nr));
par[2] = g->GetECPbRadThick()/2.; // z
- gMC->Gsvolu(pb.Data(), "BOX", fIdTmedArr[kIdPB], par, 3);
- gMC->Gspos(pb.Data(), 1, pa.Data(), 0.0, 0.0, 0.0, 0, "ONLY") ;
+ TVirtualMC::GetMC()->Gsvolu(pb.Data(), "BOX", fIdTmedArr[kIdPB], par, 3);
+ TVirtualMC::GetMC()->Gspos(pb.Data(), 1, pa.Data(), 0.0, 0.0, 0.0, 0, "ONLY") ;
}
}
} else if(g->GetNPHIdiv()==3 && g->GetNETAdiv()==3) {
printf(" before AliEMCALv0::Trd1Tower3X3() : parSCM0");
- for(int i=0; i<4; i++) printf(" %7.4f ", parSCM0[i]);
+ for(Int_t i=0; i<4; i++) printf(" %7.4f ", parSCM0[i]);
printf("\n");
Trd1Tower3X3(parSCM0);
} else if(g->GetNPHIdiv()==1 && g->GetNETAdiv()==1) {
// no division in SCM0
Trd1Tower1X1(parSCM0);
- } else if(g->GetNPHIdiv()==4 && g->GetNETAdiv()==4) {
- Trd1Tower4X4();
}
}
par[2] = g->GetEtaModuleSize()*g->GetNEta()/2.;
fIdRotm=0;
Int_t nSMod = g->GetNumberOfSuperModules();
- int nphism = nSMod/2; // 20-may-05
+ Int_t nphism = nSMod/2; // 20-may-05
if(nphism > 0) {
dphi = g->GetEMCGeometry()->GetPhiSuperModule();
rpos = (g->GetEnvelop(0) + g->GetEnvelop(1))/2.;
}
if(gn.Contains("WSUC")) {
- int nr=0;
+ Int_t nr=0;
par[0] = g->GetPhiModuleSize()*g->GetNPhi()/2.;
par[1] = g->GetShellThickness()/2.;
par[2] = g->GetEtaModuleSize()*g->GetNZ()/2. + 5;
- gMC->Gsvolu("SMOD", "BOX", fIdTmedArr[kIdAIR], par, 3);
+ TVirtualMC::GetMC()->Gsvolu("SMOD", "BOX", fIdTmedArr[kIdAIR], par, 3);
AliDebug(2,Form("SMOD in WSUC : tmed %i | dx %7.2f dy %7.2f dz %7.2f (SMOD, BOX)\n",
fIdTmedArr[kIdAIR], par[0],par[1],par[2]));
fSmodPar1 = par[1];
fSmodPar2 = par[2];
nphism = g->GetNumberOfSuperModules();
- for(int i=0; i<nphism; i++) {
+ for(Int_t i=0; i<nphism; i++) {
xpos = ypos = zpos = 0.0;
fIdRotm = 0;
- gMC->Gspos("SMOD", 1, mother, xpos, ypos, zpos, fIdRotm, "ONLY") ;
+ TVirtualMC::GetMC()->Gspos("SMOD", 1, mother, xpos, ypos, zpos, fIdRotm, "ONLY") ;
printf(" fIdRotm %3i phi %6.1f(%5.3f) xpos %7.2f ypos %7.2f zpos %7.2f \n",
fIdRotm, phi, phiRad, xpos, ypos, zpos);
nr++;
}
} else {// ALICE
AliDebug(2,Form(" par[0] %7.2f (old) \n", par[0]));
- for(int i=0; i<3; i++) par[i] = g->GetSuperModulesPar(i);
+ for(Int_t i=0; i<3; i++) par[i] = g->GetSuperModulesPar(i);
fSmodPar0 = par[0];
fSmodPar2 = par[2];
Int_t SMOrder = -1;
tmpType = -1;
for (Int_t smodnum = 0; smodnum < nSMod; ++smodnum) {
- for(int i=0; i<3; i++) parC[i] = par[i];
+ for(Int_t i=0; i<3; i++) parC[i] = par[i];
if(g->GetSMType(smodnum) == tmpType) {
SMOrder++;
} else {
} else AliError("Unkown SM Type!!");
if(SMOrder == 1) {//first time, create the SM
- gMC->Gsvolu(smName.Data(), "BOX", fIdTmedArr[kIdAIR], parC, 3);
+ TVirtualMC::GetMC()->Gsvolu(smName.Data(), "BOX", fIdTmedArr[kIdAIR], parC, 3);
AliDebug(2,Form(" Super module with name \"%s\" was created in \"box\" with: par[0] = %f, par[1] = %f, par[2] = %f\n", smName.Data(), parC[0], parC[1], parC[2]));
}
zpos *= -1.;
}
AliMatrix(fIdRotm, 90.0, phi, 90.0, phiy, phiz, 0.0);
- gMC->Gspos(smName.Data(), SMOrder, mother, xpos, ypos, zpos, fIdRotm, "ONLY") ;
+ TVirtualMC::GetMC()->Gspos(smName.Data(), SMOrder, mother, xpos, ypos, zpos, fIdRotm, "ONLY") ;
AliDebug(3, Form(" %s : %2i, fIdRotm %3i phi %6.1f(%5.3f) xpos %7.2f ypos %7.2f zpos %7.2f : i %i \n",
smName.Data(), SMOrder, fIdRotm, phi, phiRad, xpos, ypos, zpos, smodnum));
}
// Steel plate
if(g->GetSteelFrontThickness() > 0.0) { // 28-mar-05
par[0] = g->GetSteelFrontThickness()/2.;
- gMC->Gsvolu("STPL", "BOX", fIdTmedArr[kIdSTEEL], par, 3);
+ TVirtualMC::GetMC()->Gsvolu("STPL", "BOX", fIdTmedArr[kIdSTEEL], par, 3);
printf("tmed %i | dx %7.2f dy %7.2f dz %7.2f (STPL) \n", fIdTmedArr[kIdSTEEL], par[0],par[1],par[2]);
xpos = -(g->GetShellThickness() - g->GetSteelFrontThickness())/2.;
- gMC->Gspos("STPL", 1, "SMOD", xpos, 0.0, 0.0, 0, "ONLY") ;
+ TVirtualMC::GetMC()->Gspos("STPL", 1, "SMOD", xpos, 0.0, 0.0, 0, "ONLY") ;
}
}
fParEMOD[1] = g->Get2Trd1Dx2()/2.; // dx2
fParEMOD[2] = g->GetPhiModuleSize()/2.;; // dy
fParEMOD[3] = g->GetLongModuleSize()/2.; // dz
- gMC->Gsvolu(child, "TRD1", fIdTmedArr[kIdSTEEL], fParEMOD, 4);
+ TVirtualMC::GetMC()->Gsvolu(child, "TRD1", fIdTmedArr[kIdSTEEL], fParEMOD, 4);
}
- int nr=0;
+ Int_t nr=0;
fIdRotm=0;
// X->Z(0, 0); Y->Y(90, 90); Z->X(90, 0)
AliEMCALShishKebabTrd1Module *mod=0; // current module
- for(int iz=0; iz<g->GetNZ(); iz++) {
+ for(Int_t iz=0; iz<g->GetNZ(); iz++) {
Double_t angle=90., phiOK=0;
mod = (AliEMCALShishKebabTrd1Module*)fShishKebabModules->At(iz);
angle = mod->GetThetaInDegree();
if(!gn.Contains("WSUC")) { // ALICE
AliMatrix(fIdRotm, 90.-angle,180., 90.0,90.0, angle, 0.);
phiOK = mod->GetCenterOfModule().Phi()*180./TMath::Pi();
- // printf(" %2i | angle | %6.3f - %6.3f = %6.3f(eta %5.3f)\n",
- //iz+1, angle, phiOK, angle-phiOK, mod->GetEtaOfCenterOfModule());
+ AliDebug(4,Form(" %2i | angle | %6.3f - %6.3f = %6.3f(eta %5.3f)\n",
+ iz+1, angle, phiOK, angle-phiOK, mod->GetEtaOfCenterOfModule()));
xpos = mod->GetPosXfromR() + g->GetSteelFrontThickness() - fSmodPar0;
zpos = mod->GetPosZ() - fSmodPar2;
- int iyMax = g->GetNPhi();
+ Int_t iyMax = g->GetNPhi();
if(strcmp(mother,"SM10") == 0 ) {
iyMax /= 2;
} else if(strcmp(mother,"SM3rd") == 0 ) {
zpos = mod->GetPosZ() - fSmodPar2 - g->GetDCALInnerEdge()/2.;
} else if(strcmp(mother,"SMOD") != 0 )
AliError("Unknown super module Type!!");
- for(int iy=0; iy<iyMax; iy++) { // flat in phi
+ for(Int_t iy=0; iy<iyMax; iy++) { // flat in phi
ypos = g->GetPhiModuleSize()*(2*iy+1 - iyMax)/2.;
- gMC->Gspos(child, ++nr, mother, xpos, ypos, zpos, fIdRotm, "ONLY") ;
+ TVirtualMC::GetMC()->Gspos(child, ++nr, mother, xpos, ypos, zpos, fIdRotm, "ONLY") ;
//
//printf(" %2i xpos %7.2f ypos %7.2f zpos %7.2f fIdRotm %i\n", nr, xpos, ypos, zpos, fIdRotm);
AliDebug(3,Form("%3.3i(%2.2i,%2.2i) ", nr,iy+1,iz+1));
if(iz == 0) AliMatrix(fIdRotm, 0.,0., 90.,0., 90.,90.); // (x')z; y'(x); z'(y)
else AliMatrix(fIdRotm, 90-angle,270., 90.0,0.0, angle,90.);
phiOK = mod->GetCenterOfModule().Phi()*180./TMath::Pi();
- //printf(" %2i | angle -phiOK | %6.3f - %6.3f = %6.3f(eta %5.3f)\n",
- //iz+1, angle, phiOK, angle-phiOK, mod->GetEtaOfCenterOfModule());
+ AliDebug(4,Form(" %2i | angle -phiOK | %6.3f - %6.3f = %6.3f(eta %5.3f)\n",
+ iz+1, angle, phiOK, angle-phiOK, mod->GetEtaOfCenterOfModule()));
zpos = mod->GetPosZ() - fSmodPar2;
ypos = mod->GetPosXfromR() - fSmodPar1;
//printf(" zpos %7.2f ypos %7.2f fIdRotm %i\n xpos ", zpos, xpos, fIdRotm);
- for(int ix=0; ix<g->GetNPhi(); ix++)
+ for(Int_t ix=0; ix<g->GetNPhi(); ix++)
{ // flat in phi
xpos = g->GetPhiModuleSize()*(2*ix+1 - g->GetNPhi())/2.;
- gMC->Gspos(child, ++nr, mother, xpos, ypos, zpos, fIdRotm, "ONLY") ;
- printf(" %7.2f ", xpos);
+ TVirtualMC::GetMC()->Gspos(child, ++nr, mother, xpos, ypos, zpos, fIdRotm, "ONLY") ;
+ //printf(" %7.2f ", xpos);
}
- printf("\n");
+ //printf("\n");
}
}
AliDebug(2,Form(" Number of modules in Super Module(%s) %i \n", mother, nr));
parALFP[1] = parALFP[0] + tanTrd1*g->GetTrd1AlFrontThick(); // dx2
parALFP[2] = g->GetPhiModuleSize()/2. - g->GetLateralSteelStrip(); // dy
parALFP[3] = g->GetTrd1AlFrontThick()/2.; // dz
- gMC->Gsvolu(child, "TRD1", fIdTmedArr[kIdAL], parALFP, 4);
+ TVirtualMC::GetMC()->Gsvolu(child, "TRD1", fIdTmedArr[kIdAL], parALFP, 4);
zposALFP = -fParEMOD[3] + g->GetTrd1AlFrontThick()/2.;
- gMC->Gspos (child, 1, mother, 0.0, 0.0, zposALFP, 0, "ONLY");
+ TVirtualMC::GetMC()->Gspos (child, 1, mother, 0.0, 0.0, zposALFP, 0, "ONLY");
}
//______________________________________________________________________
-void AliEMCALv0::Trd1Tower3X3(const double *parSCM0)
+void AliEMCALv0::Trd1Tower3X3(const Double_t *parSCM0)
{
// Started Dec 8,2004 by PAI
// Fixed Nov 13,2006
printf(" AliEMCALv0::Trd1Tower3X3() : parSCM0");
- for(int i=0; i<4; i++) printf(" %7.4f ", parSCM0[i]);
+ for(Int_t i=0; i<4; i++) printf(" %7.4f ", parSCM0[i]);
printf("\n");
// Nov 10, 2006 - different name of SCMX
- double parTRAP[11], *dummy=0;
+ Double_t parTRAP[11], *dummy=0;
AliEMCALGeometry * g = GetGeometry();
TString gn(g->GetName()), scmx;
gn.ToUpper();
// Division to tile size
AliDebug(2,Form("Trd1Tower3X3() : Divide SCM0 on y-axis %i", g->GetNETAdiv()));
- gMC->Gsdvn("SCMY","SCM0", g->GetNETAdiv(), 2); // y-axis
- double dx1=parSCM0[0], dx2=parSCM0[1], dy=parSCM0[2], dz=parSCM0[3];
- double ndiv=3., xpos=0.0;
+ TVirtualMC::GetMC()->Gsdvn("SCMY","SCM0", g->GetNETAdiv(), 2); // y-axis
+ Double_t dx1=parSCM0[0], dx2=parSCM0[1], dy=parSCM0[2], dz=parSCM0[3];
+ Double_t ndiv=3., xpos=0.0;
// should be defined once
- gMC->Gsvolu("PBTI", "BOX", fIdTmedArr[kIdPB], dummy, 0);
- for(int ix=1; ix<=3; ix++) { // 3X3
+ TVirtualMC::GetMC()->Gsvolu("PBTI", "BOX", fIdTmedArr[kIdPB], dummy, 0);
+ for(Int_t ix=1; ix<=3; ix++) { // 3X3
scmx = "SCX"; // Nov 10,2006
// ix=1
parTRAP[0] = dz;
- double xCentBot = 2.*dx1/3.;
- double xCentTop = 2.*(dx2/4. + dx1/12.);
+ Double_t xCentBot = 2.*dx1/3.;
+ Double_t xCentTop = 2.*(dx2/4. + dx1/12.);
parTRAP[1] = TMath::ATan2((xCentTop-xCentBot),2.*dz)*TMath::RadToDeg(); // theta
parTRAP[2] = 0.; // phi
// bottom
xpos = 0.0;
}
AliDebug(2,Form(" ** TRAP ** xpos %9.3f\n", xpos));
- for(int i=0; i<11; i++) AliDebug(2,Form(" par[%2.2i] %9.4f\n", i, parTRAP[i]));
+ for(Int_t i=0; i<11; i++) AliDebug(2,Form(" par[%2.2i] %9.4f\n", i, parTRAP[i]));
scmx += ix;
- gMC->Gsvolu(scmx.Data(), "TRAP", fIdTmedArr[kIdSC], parTRAP, 11);
- gMC->Gspos(scmx.Data(), 1, "SCMY", xpos, 0.0, 0.0, 0, "ONLY") ;
+ TVirtualMC::GetMC()->Gsvolu(scmx.Data(), "TRAP", fIdTmedArr[kIdSC], parTRAP, 11);
+ TVirtualMC::GetMC()->Gspos(scmx.Data(), 1, "SCMY", xpos, 0.0, 0.0, 0, "ONLY") ;
PbInTrap(parTRAP, scmx);
}
// 8-dec-04 by PAI
//______________________________________________________________________
-void AliEMCALv0::PbInTrap(const double parTRAP[11], TString n)
+void AliEMCALv0::PbInTrap(const Double_t parTRAP[11], TString n)
{
// see for example CreateShishKebabGeometry(); just for case TRD1
- static int nr=0;
+ static Int_t nr=0;
AliDebug(2,Form(" Pb tiles : nrstart %i\n", nr));
AliEMCALGeometry * g = GetGeometry();
- double par[3];
- double xpos = 0.0, ypos = 0.0;
- double zpos = -fSampleWidth*g->GetNECLayers()/2. + g->GetECPbRadThick()/2.;
+ Double_t par[3];
+ Double_t xpos = 0.0, ypos = 0.0;
+ Double_t zpos = -fSampleWidth*g->GetNECLayers()/2. + g->GetECPbRadThick()/2.;
- double coef = (parTRAP[8] - parTRAP[4]) / (2.*parTRAP[0]);
- double xCenterSCMX = (parTRAP[4] + parTRAP[8])/2.; // ??
- // double tan = TMath::Tan(parTRAP[1]*TMath::DegToRad());
+ Double_t coef = (parTRAP[8] - parTRAP[4]) / (2.*parTRAP[0]);
+ Double_t xCenterSCMX = (parTRAP[4] + parTRAP[8])/2.; // ??
+ // Double_t tan = TMath::Tan(parTRAP[1]*TMath::DegToRad());
par[1] = parTRAP[3]; // y
par[2] = g->GetECPbRadThick()/2.; // z
- for(int iz=0; iz<g->GetNECLayers(); iz++){
+ for(Int_t iz=0; iz<g->GetNECLayers(); iz++){
par[0] = parTRAP[4] + coef*fSampleWidth*iz;
xpos = par[0] - xCenterSCMX;
if(parTRAP[1] < 0.) xpos = -xpos;
- gMC->Gsposp("PBTI", ++nr, n.Data(), xpos, ypos, zpos, 0, "ONLY", par, 3) ;
+ TVirtualMC::GetMC()->Gsposp("PBTI", ++nr, n.Data(), xpos, ypos, zpos, 0, "ONLY", par, 3) ;
AliDebug(2,Form(" %i xpos %9.3f zpos %9.3f par[0] %9.3f |", iz+1, xpos, zpos, par[0]));
zpos += fSampleWidth;
if(iz%2>0) printf("\n");
AliDebug(2,Form(" PbInTrap Ver. 1.0 : was tested."));
}
-// 8-dec-04 by PAI
//______________________________________________________________________
-void AliEMCALv0::Trd1Tower4X4() const
-{
- // Not ready yet
-}
-
-//______________________________________________________________________
-void AliEMCALv0::Trd1Tower1X1(double *parSCM0)
+void AliEMCALv0::Trd1Tower1X1(Double_t *parSCM0)
{
// Started Nov 22,2006 by PAI
AliDebug(1," AliEMCALv0::Trd1Tower1X1() : parSCM0");
- for(int i=0; i<4; i++) printf(" %7.4f ", parSCM0[i]);
+ for(Int_t i=0; i<4; i++) printf(" %7.4f ", parSCM0[i]);
printf("\n");
// No division - keeping the same volume logic
// and as consequence the same abs is scheme
AliDebug(2,"Trd1Tower1X1() : Create SCMX(SCMY) as SCM0");
- gMC->Gsvolu("SCMY", "TRD1", fIdTmedArr[kIdAIR], parSCM0, 4);
- gMC->Gspos("SCMY", 1, "SCM0", 0.0, 0.0, 0.0, 0, "ONLY");
- gMC->Gsvolu("SCMX", "TRD1", fIdTmedArr[kIdSC], parSCM0, 4);
- gMC->Gspos("SCMX", 1, "SCMY", 0.0, 0.0, 0.0, 0, "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("SCMY", "TRD1", fIdTmedArr[kIdAIR], parSCM0, 4);
+ TVirtualMC::GetMC()->Gspos("SCMY", 1, "SCM0", 0.0, 0.0, 0.0, 0, "ONLY");
+ TVirtualMC::GetMC()->Gsvolu("SCMX", "TRD1", fIdTmedArr[kIdSC], parSCM0, 4);
+ TVirtualMC::GetMC()->Gspos("SCMX", 1, "SCMY", 0.0, 0.0, 0.0, 0, "ONLY");
// should be defined once
- double *dummy=0;
- gMC->Gsvolu("PBTI", "BOX", fIdTmedArr[kIdPB], dummy, 0);
+ Double_t *dummy=0;
+ TVirtualMC::GetMC()->Gsvolu("PBTI", "BOX", fIdTmedArr[kIdPB], dummy, 0);
PbInTrd1(parSCM0, "SCMX");
}
//______________________________________________________________________
-void AliEMCALv0::PbInTrd1(const double *parTrd1, TString n)
+void AliEMCALv0::PbInTrd1(const Double_t *parTrd1, TString n)
{
- // see PbInTrap(const double parTrd1[11], TString n)
- static int nr=0, ndeb=2;
+ // see PbInTrap(const Double_t parTrd1[11], TString n)
+ static Int_t nr=0, ndeb=2;
AliDebug(ndeb,Form(" Pb tiles : nrstart %i\n", nr));
AliEMCALGeometry * g = GetGeometry();
- double par[3];
- double xpos = 0.0, ypos = 0.0;
- double zpos = -fSampleWidth*g->GetNECLayers()/2. + g->GetECPbRadThick()/2.;
- double coef = (parTrd1[1] - parTrd1[0]) / (2.*parTrd1[3]);
+ Double_t par[3];
+ Double_t xpos = 0.0, ypos = 0.0;
+ Double_t zpos = -fSampleWidth*g->GetNECLayers()/2. + g->GetECPbRadThick()/2.;
+ Double_t coef = (parTrd1[1] - parTrd1[0]) / (2.*parTrd1[3]);
par[1] = parTrd1[2]; // y
par[2] = g->GetECPbRadThick()/2.; // z
- for(int iz=0; iz<g->GetNECLayers(); iz++){
+ for(Int_t iz=0; iz<g->GetNECLayers(); iz++){
par[0] = parTrd1[0] + coef*fSampleWidth*iz;
- gMC->Gsposp("PBTI", ++nr, n.Data(), xpos, ypos, zpos, 0, "ONLY", par, 3) ;
+ TVirtualMC::GetMC()->Gsposp("PBTI", ++nr, n.Data(), xpos, ypos, zpos, 0, "ONLY", par, 3) ;
AliDebug(2,Form(" %i xpos %9.3f zpos %9.3f par[0] %9.3f |", iz+1, xpos, zpos, par[0]));
zpos += fSampleWidth;
if(iz%2>0) printf("\n");
AliDebug(ndeb,Form(" PbInTrd1 Ver. 0.1 : was tested."));
}
-// 3-feb-05
-//______________________________________________________________________
-void AliEMCALv0::Scm0InTrd2(const AliEMCALGeometry * g, const Double_t emodPar[5], Double_t parSCM0[5])
-{
- // Passive material inside the detector
- double wallThickness = g->GetPhiModuleSize()/2. - g->GetPhiTileSize(); //Need check
- AliDebug(2,Form(" wall thickness %7.5f \n", wallThickness));
- for(int i=0; i<4; i++) { // on pictures sometimes I can not see 0 -> be carefull!!
- parSCM0[i] = emodPar[i] - wallThickness;
- AliDebug(2,Form(" %i parSCMO %7.3f emodPar %7.3f : dif %7.3f \n",
- i, parSCM0[i],emodPar[i], parSCM0[i]-emodPar[i]));
- }
- parSCM0[4] = emodPar[4];
- gMC->Gsvolu("SCM0", "TRD2", fIdTmedArr[kIdSC], parSCM0, 5); // kIdAIR -> kIdSC
- gMC->Gspos("SCM0", 1, "EMOD", 0., 0., 0., 0, "ONLY") ;
- // Division
- if(g->GetNPHIdiv()==2 && g->GetNETAdiv()==2) {
- Division2X2InScm0(g, parSCM0);
- } else {
- Info("Scm0InTrd2"," no division SCM0 in this geometry |%s|\n", g->GetName());
- assert(0);
- }
-}
-
-//______________________________________________________________________
-void AliEMCALv0::Division2X2InScm0(const AliEMCALGeometry * g, const Double_t parSCM0[5])
-{
- // Division 2X2
- Double_t parTRAP[11], xpos=0.,ypos=0., dx1=0.0,dx2=0.,dy1=0.0,dy2=0.,dz=0.
- ,dr1=0.0,dr2=0.;
- fIdRotm=0;
-
- Info("Division2X2InScm0","Divide SCM0 on y-axis %i\n", g->GetNETAdiv());
- TString n("SCMX"), overLapFlagSCMY("ONLY"), overLapFlagSCMX("ONLY");
- n = "SCM0"; // for testing - 14-mar-05
- if(n=="SCM0"){
- PbInTrapForTrd2(parSCM0, n);
- // overLapFlagSCMY=overLapFlagSCMX="MANY"; // do not work
- return;
- }
-
- dy1 = parSCM0[2] , dy2 = parSCM0[3], dz = parSCM0[4];
-
- parTRAP[0] = parSCM0[4]; // dz
- parTRAP[1] = TMath::ATan2((dy2-dy1)/2.,2.*dz)*TMath::RadToDeg();
- parTRAP[2] = 90.; // phi
- // bottom
- parTRAP[3] = parSCM0[2]/2.; // H1
- parTRAP[4] = parSCM0[0]; // BL1
- parTRAP[5] = parTRAP[4]; // TL1
- parTRAP[6] = 0.0; // ALP1
- // top
- parTRAP[7] = parSCM0[3]/2.; // H2
- parTRAP[8] = parSCM0[1]; // BL2
- parTRAP[9] = parTRAP[8]; // TL2
- parTRAP[10]= 0.0; // ALP2
- AliDebug(2,Form(" ** SCMY ** \n"));
- for(int i=0; i<11; i++) AliDebug(2,Form(" par[%2.2i] %9.4f\n", i, parTRAP[i]));
-
- fIdRotm=0;
- gMC->Gsvolu("SCMY", "TRAP", fIdTmedArr[kIdSC], parTRAP, 11); // kIdAIR -> kIdSC
- ypos = +(parTRAP[3]+parTRAP[7])/2.; //
- AliDebug(2,Form(" Y shift SCMY inside SCM0 : %7.3f : opt %s\n", ypos, overLapFlagSCMY.Data()));
- gMC->Gspos("SCMY", 1, "SCM0", 0.0, ypos, 0.0, fIdRotm, overLapFlagSCMY.Data()) ;
- // Rotation SCMY around z-axis on 180 degree; x'=-x; y'=-y and z=z
- AliMatrix(fIdRotm, 90.0,180., 90.0, 270.0, 0.0,0.0) ;
- // We may have problem with numeration due to rotation - 4-feb-05
- gMC->Gspos("SCMY", 2, "SCM0", 0.0, -ypos, 0.0, fIdRotm, overLapFlagSCMY.Data());
-
- Info("Division2X2InScm0","Divide SCMY on x-axis %i\n", g->GetNPHIdiv());
- dx1 = parSCM0[0];
- dx2 = parSCM0[1];
- dr1=TMath::Sqrt(dx1*dx1+dy1*dy1);
- dr2=TMath::Sqrt(dx2*dx2+dy2*dy2);
-
- parTRAP[0] = parSCM0[4]; // dz
- parTRAP[1] = TMath::ATan2((dr2-dr1)/2.,2.*dz)*TMath::RadToDeg(); //
- parTRAP[2] = 45.; // phi
- // bottom
- parTRAP[3] = parSCM0[2]/2.; // H1
- parTRAP[4] = parSCM0[0]/2.; // BL1
- parTRAP[5] = parTRAP[4]; // TL1
- parTRAP[6] = 0.0; // ALP1
- // top
- parTRAP[7] = parSCM0[3]/2.; // H2
- parTRAP[8] = parSCM0[1]/2; // BL2
- parTRAP[9] = parTRAP[8]; // TL2
- parTRAP[10]= 0.0; // ALP2
- AliDebug(2,Form(" ** SCMX ** \n"));
- for(int i=0; i<11; i++) AliDebug(2,Form(" par[%2.2i] %9.4f\n", i, parTRAP[i]));
-
- fIdRotm=0;
- gMC->Gsvolu("SCMX", "TRAP", fIdTmedArr[kIdSC], parTRAP, 11);
- xpos = (parTRAP[4]+parTRAP[8])/2.;
- AliDebug(2,Form(" X shift SCMX inside SCMX : %7.3f : opt %s\n", xpos, overLapFlagSCMX.Data()));
- gMC->Gspos("SCMX", 1, "SCMY", xpos, 0.0, 0.0, fIdRotm, overLapFlagSCMX.Data()) ;
- // AliMatrix(fIdRotm, 90.0,270., 90.0, 0.0, 0.0,0.0); // x'=-y; y'=x; z'=z
- AliMatrix(fIdRotm, 90.0,90., 90.0, -180.0, 0.0,0.0); // x'=y; y'=-x; z'=z
- gMC->Gspos("SCMX", 2, "SCMY", -xpos, 0.0, 0.0, fIdRotm, overLapFlagSCMX.Data()) ;
- // PB:
- if(n=="SCMX" && overLapFlagSCMY == "ONLY") {
- PbInTrapForTrd2(parTRAP, n);
- }
-}
-
-// 4-feb-05 by PAI
-//______________________________________________________________________
-void AliEMCALv0::PbInTrapForTrd2(const double *parTRAP, TString name)
-{
- // TRD2 cases
- Double_t *dummy=0;
- TString pbShape("BOX"), pbtiChonly("ONLY");
- if(name=="SCM0") {
- pbShape = "TRD2";
- // pbtiChonly = "MANY";
- }
- gMC->Gsvolu("PBTI", pbShape.Data(), fIdTmedArr[kIdPB], dummy, 0);
-
- int nr=0;
- Info("PbInTrapForTrd2"," Pb tiles inside %s: shape %s :pbtiChonly %s\n nrstart %i\n",
- name.Data(), pbShape.Data(), pbtiChonly.Data(), nr);
- AliEMCALGeometry * g = GetGeometry();
-
- double par[5], parPB[5], parSC[5];
- double xpos = 0.0, ypos = 0.0;
- double zpos = -fSampleWidth*g->GetNECLayers()/2. + g->GetECPbRadThick()/2.;
- if(name == "SCMX") { // common trapezoid - 11 parameters
- double coef = (parTRAP[8] - parTRAP[4]) / (2.*parTRAP[0]);
- double xCenterSCMX = (parTRAP[4] + parTRAP[8])/2.; // the same for y
- AliDebug(2,Form(" xCenterSCMX %8.5f : coef %8.7f \n", xCenterSCMX, coef));
-
- par[2] = g->GetECPbRadThick()/2.; // z
- for(int iz=0; iz<g->GetNECLayers(); iz++){
- par[0] = parTRAP[4] + coef*fSampleWidth*iz;
- par[1] = par[0];
- xpos = ypos = par[0] - xCenterSCMX;
- //if(parTRAP[1] < 0.) xpos = -xpos;
- gMC->Gsposp("PBTI", ++nr, name.Data(), xpos, ypos, zpos, 0, "ONLY", par, 3) ;
- AliDebug(2,Form(" %2.2i xpos %8.5f zpos %6.3f par[0,1] %6.3f |", iz+1, xpos, zpos, par[0]));
- if(iz%2>0) AliDebug(2,Form("\n"));
- zpos += fSampleWidth;
- }
- AliDebug(2,Form(" Number of Pb tiles in SCMX %i coef %9.7f \n", nr, coef));
- AliDebug(2,Form(" par[1] %9.5f par[2] %9.5f ypos %9.5f \n", par[1], par[2], ypos));
- } else if(name == "SCM0") { // 1-mar-05 ; TRD2 - 5 parameters
- AliDebug(2,Form(" SCM0 par = "));
- for(int i=0; i<5; i++) AliDebug(2,Form(" %9.5f ", parTRAP[i]));
- AliDebug(2,Form("\n zpos %f \n",zpos));
-
- double tanx = (parTRAP[1] - parTRAP[0]) / (2.*parTRAP[4]); // tanx = tany now
- double tany = (parTRAP[3] - parTRAP[2]) / (2.*parTRAP[4]), ztmp=0.;
- parPB[4] = g->GetECPbRadThick()/2.;
- parSC[2] = g->GetECScintThick()/2.;
- for(int iz=0; iz<g->GetNECLayers(); iz++){
- ztmp = fSampleWidth*double(iz);
- parPB[0] = parTRAP[0] + tanx*ztmp;
- parPB[1] = parPB[0] + tanx*g->GetECPbRadThick();
- parPB[2] = parTRAP[2] + tany*ztmp;
- parPB[3] = parPB[2] + tany*g->GetECPbRadThick();
- gMC->Gsposp("PBTI", ++nr, name.Data(), xpos, ypos, zpos, 0, pbtiChonly.Data(), parPB, 5) ;
- AliDebug(2,Form("\n PBTI %2i | zpos %6.3f | par = ", nr, zpos));
- /*
- for(int i=0; i<5; i++) printf(" %9.5f ", parPB[i]);
- // individual SC tile
- parSC[0] = parPB[0];
- parSC[1] = parPB[1];
- gMC->Gsposp("SCTI", nr, name.Data(), xpos, ypos, zpos+g->GetECScintThick(),
- 0, pbtiChonly.Data(), parSC, 3) ;
- printf("\n SCTI zpos %6.3f | par = ", zpos+g->GetECScintThick());
- for(int i=0; i<3; i++) printf(" %9.5f ", parPB[i]);
- */
- zpos += fSampleWidth;
- }
- AliDebug(2,Form("\n"));
- }
- Info("PbInTrapForTrd2", "Ver. 0.03 : was tested.");
-}
-
-// 15-mar-05
-//______________________________________________________________________
-void AliEMCALv0::PbmoInTrd2(const AliEMCALGeometry * g, const Double_t emodPar[5], Double_t parPBMO[5])
-{
- // Pb inside Trd2
- Info("PbmoInTrd2"," started : geometry %s ", g->GetName());
- double wallThickness = g->GetPhiModuleSize()/2. - g->GetPhiTileSize();
- AliDebug(2,Form(" wall thickness %7.5f \n", wallThickness));
- for(int i=0; i<4; i++) {
- parPBMO[i] = emodPar[i] - wallThickness;
- AliDebug(2,Form(" %i parPBMO %7.3f emodPar %7.3f : dif %7.3f \n",
- i, parPBMO[i],emodPar[i], parPBMO[i]-emodPar[i]));
- }
- parPBMO[4] = emodPar[4];
- gMC->Gsvolu("PBMO", "TRD2", fIdTmedArr[kIdPB], parPBMO, 5);
- gMC->Gspos("PBMO", 1, "EMOD", 0., 0., 0., 0, "ONLY") ;
- // Division
- if(g->GetNPHIdiv()==2 && g->GetNETAdiv()==2) {
- Division2X2InPbmo(g, parPBMO);
- AliDebug(2,Form(" PBMO, division 2X2 | geometry |%s|\n", g->GetName()));
- } else {
- AliDebug(2,Form(" no division PBMO in this geometry |%s|\n", g->GetName()));
- assert(0);
- }
-}
-
-//______________________________________________________________________
-void AliEMCALv0::Division2X2InPbmo(const AliEMCALGeometry * g, const Double_t parPBMO[5])
-{
- // Division 2X2
- Info("Division2X2InPbmo"," started : geometry %s ", g->GetName());
- //Double_t *dummy=0;
- // gMC->Gsvolu("SCTI", "BOX", fIdTmedArr[kIdSC], dummy, 0);
-
- double parSC[3];
- double xpos = 0.0, ypos = 0.0, zpos = 0.0, ztmp=0;;
- double tanx = (parPBMO[1] - parPBMO[0]) / (2.*parPBMO[4]); // tanx = tany now
- double tany = (parPBMO[3] - parPBMO[2]) / (2.*parPBMO[4]);
- const Int_t buffersize = 10;
- char name[buffersize], named[buffersize], named2[buffersize];
-
- AliDebug(2,Form(" PBMO par = "));
- for(int i=0; i<5; i++) AliDebug(2,Form(" %9.5f ", parPBMO[i]));
- AliDebug(2,Form("\n"));
-
- parSC[2] = g->GetECScintThick()/2.;
- zpos = -fSampleWidth*g->GetNECLayers()/2. + g->GetECPbRadThick() + g->GetECScintThick()/2.;
- AliDebug(2,Form(" parSC[2] %9.5f \n", parSC[2]));
- for(int iz=0; iz<g->GetNECLayers(); iz++){
- ztmp = g->GetECPbRadThick() + fSampleWidth*double(iz); // Z for previous PB
- parSC[0] = parPBMO[0] + tanx*ztmp;
- parSC[1] = parPBMO[2] + tany*ztmp;
-
- snprintf(name,buffersize,"SC%2.2i", iz+1);
- gMC->Gsvolu(name, "BOX", fIdTmedArr[kIdSC], parSC, 3);
- gMC->Gspos(name, 1, "PBMO", xpos, ypos, zpos, 0, "ONLY") ;
- AliDebug(2,Form("%s | zpos %6.3f | parSC[0,1]=(%7.5f,%7.5f) -> ",
- name, zpos, parSC[0], parSC[1]));
-
- snprintf(named,buffersize,"SY%2.2i", iz+1);
- printf(" %s -> ", named);
- gMC->Gsdvn(named,name, 2, 2);
-
- snprintf(named2,buffersize,"SX%2.2i", iz+1);
- printf(" %s \n", named2);
- gMC->Gsdvn(named2,named, 2, 1);
-
- zpos += fSampleWidth;
- }
-}
-
//______________________________________________________________________
AliEMCALShishKebabTrd1Module* AliEMCALv0::GetShishKebabModule(Int_t neta)
{
//
Float_t pars[] = {GetGeometry()->GetSuperModulesPar(0),GetGeometry()->GetSuperModulesPar(1),GetGeometry()->GetSuperModulesPar(2)};
- double rpos = (GetGeometry()->GetEnvelop(0) + GetGeometry()->GetEnvelop(1))/2.;
- double phi, phiRad, xpos, ypos, zpos;
+ Double_t rpos = (GetGeometry()->GetEnvelop(0) + GetGeometry()->GetEnvelop(1))/2.;
+ Double_t phi, phiRad, xpos, ypos, zpos;
AliGeomManager::ELayerID idEMCAL = AliGeomManager::kEMCAL;
Int_t modUID, modnum = 0;
} else {
// negative z
- double phiy = 90. + phi + 180.;
+ Double_t phiy = 90. + phi + 180.;
if(phiy>=360.) phiy -= 360.;
TGeoTranslation geoTran1(xpos,ypos,-zpos);
TGeoRotation geoRot1("geoRot1", 90.0, phi, 90.0, phiy, 180.0, 0.0);
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff