* about the suitability of this software for any purpose. It is *
* provided "as is" without express or implied warranty. *
**************************************************************************/
-
/* $Id$ */
-
+/** @file AliFMD.cxx
+ @author Christian Holm Christensen <cholm@nbi.dk>
+ @date Sun Mar 26 17:59:18 2006
+ @brief Implementation of AliFMD base class
+*/
//____________________________________________________________________
//
// Forward Multiplicity Detector based on Silicon wafers. This class
-// contains the base procedures for the Forward Multiplicity detector
-// Detector consists of 5 Si volumes covered pseudorapidity interval
-// from 1.7 to 5.1.
+// is the driver for especially simulation.
+//
+// The Forward Multiplicity Detector consists of 3 sub-detectors FMD1,
+// FMD2, and FMD3, each of which has 1 or 2 rings of silicon sensors.
//
// This is the base class for all FMD manager classes.
//
// The actual code is done by various separate classes. Below is
// diagram showing the relationship between the various FMD classes
-// that handles the geometry
+// that handles the simulation
//
//
// +----------+ +----------+
-// | AliFMDv1 | | AliFMDv1 |
+// | AliFMDv1 | | AliFMDv0 |
// +----------+ +----------+
-// | |
-// +----+--------------+
-// |
-// | +------------+ 1 +---------------+
-// | +- | AliFMDRing |<>--| AliFMDPolygon |
-// V 2 | +------------+ +---------------+
-// +--------+<>--+ |
-// | AliFMD | ^
-// +--------+<>--+ V 1..2
-// 3 | +-------------------+
-// +-| AliFMDSubDetector |
-// +-------------------+
-// ^
-// |
-// +-------------+-------------+
-// | | |
-// +---------+ +---------+ +---------+
-// | AliFMD1 | | AliFMD2 | | AliFMD3 |
-// +---------+ +---------+ +---------+
-//
+// | | +-----------------+
+// +----+--------------+ +--| AliFMDDigitizer |
+// | | +-----------------+
+// | +---------------------+ |
+// | +--| AliFMDBaseDigitizer |<--+
+// V 1 | +---------------------+ |
+// +--------+<>--+ | +------------------+
+// | AliFMD | +--| AliFMDSDigitizer |
+// +--------+<>--+ +------------------+
+// 1 | +---------------------+
+// +--| AliFMDReconstructor |
+// +---------------------+
//
// * AliFMD
// This defines the interface for the various parts of AliROOT that
-// uses the FMD, like AliFMDDigitizer, AliFMDReconstructor, and so
-// on.
+// uses the FMD, like AliFMDSimulator, AliFMDDigitizer,
+// AliFMDReconstructor, and so on.
+//
+// * AliFMDv0
+// This is a concrete implementation of the AliFMD interface.
+// It is the responsibility of this class to create the FMD
+// geometry.
//
// * AliFMDv1
// This is a concrete implementation of the AliFMD interface.
// geometry, process hits in the FMD, and serve hits and digits to
// the various clients.
//
-// It uses the objects of class AliFMDSubDetector to do the various
-// stuff for FMD1, 2, and 3
-//
-// * AliFMDRing
-// This class contains all stuff needed to do with a ring. It's
-// used by the AliFMDSubDetector objects to instantise inner and
-// outer rings. The AliFMDRing objects are shared by the
-// AliFMDSubDetector objects, and owned by the AliFMDv1 object.
-//
-// * AliFMDPolygon
-// The code I lifted from TGeoPolygon to help with the geometry of
-// the modules, as well as to decide wether a hit is actually with
-// in the real module shape. The point is, that the shape of the
-// various ring modules are really polygons (much like the lid of a
-// coffin), but it's segmented at constant radius. That is very
-// hard to implement using GEANT 3.21 shapes, so instead the
-// modules are implemented as TUBS (tube sections), and in the step
-// procedure we do the test whether the track was inside the real
-// shape of the module.
-//
-// * AliFMD1, AliFMD2, and AliFMD3
-// These are specialisation of AliFMDSubDetector, that contains the
-// particularities of each of the sub-detector system. It is
-// envisioned that the classes should also define the support
-// volumes and material for each of the detectors.
+// * AliFMDSimulator
+// This is the base class for the FMD simulation tasks. The
+// simulator tasks are responsible to implment the geoemtry, and
+// process hits.
//
-// The responsible person for this module is Alla Maevskaia
-// <Alla.Maevskaia@cern.ch>.
+// * AliFMDReconstructor
+// This is a concrete implementation of the AliReconstructor that
+// reconstructs pseudo-inclusive-multiplicities from digits (raw or
+// from simulation)
//
-// Many modifications by Christian Holm Christensen <cholm@nbi.dk>
+// Calibration and geometry parameters are managed by separate
+// singleton managers. These are AliFMDGeometry and
+// AliFMDParameters. Please refer to these classes for more
+// information on these.
//
// These files are not in the same directory, so there's no reason to
// ask the preprocessor to search in the current directory for these
// files by including them with `#include "..."'
+#include <TBrowser.h> // ROOT_TBrowser
#include <TClonesArray.h> // ROOT_TClonesArray
-#include <TGeometry.h> // ROOT_TGeomtry
-#include <TNode.h> // ROOT_TNode
-#include <TTUBE.h> // ROOT_TTUBE
+#include <TGeoGlobalMagField.h> // ROOT_TGeoGlobalMagField
+#include <TGeoManager.h> // ROOT_TGeoManager
+#include <TRotMatrix.h> // ROOT_TRotMatrix
#include <TTree.h> // ROOT_TTree
-#include <TVirtualMC.h> // ROOT_TVirtualMC
-#include <TBrowser.h> // ROOT_TBrowser
-#include <TMath.h> // ROOT_TMath
+#include <TVector2.h> // ROOT_TVector2
+#include <TVirtualMC.h> // ROOT_TVirtualMC
+#include <cmath> // __CMATH__
-#include <AliRunDigitizer.h> // ALIRUNDIGITIZER_H
+#include <AliDigitizationInput.h> // ALIRUNDIGITIZER_H
#include <AliLoader.h> // ALILOADER_H
#include <AliRun.h> // ALIRUN_H
#include <AliMC.h> // ALIMC_H
-#include <AliLog.h> // ALILOG_H
#include <AliMagF.h> // ALIMAGF_H
+// #include <AliLog.h> // ALILOG_H
+#include "AliFMDDebug.h" // Better debug macros
#include "AliFMD.h" // ALIFMD_H
-#include "AliFMDDigit.h" // ALIFMDDIGIG_H
+#include "AliFMDDigit.h" // ALIFMDDIGIT_H
+#include "AliFMDSDigit.h" // ALIFMDSDIGIT_H
#include "AliFMDHit.h" // ALIFMDHIT_H
+#include "AliFMDGeometry.h" // ALIFMDGEOMETRY_H
+#include "AliFMDDetector.h" // ALIFMDDETECTOR_H
+#include "AliFMDRing.h" // ALIFMDRING_H
#include "AliFMDDigitizer.h" // ALIFMDDIGITIZER_H
-#include "AliFMD1.h" // ALIFMD1_H
-#include "AliFMD2.h" // ALIFMD2_H
-#include "AliFMD3.h" // ALIFMD3_H
+#include "AliFMDHitDigitizer.h" // ALIFMDSDIGITIZER_H
+// #define USE_SSDIGITIZER
+//#ifdef USE_SSDIGITIZER
+//# include "AliFMDSSDigitizer.h" // ALIFMDSDIGITIZER_H
+//#endif
+// #include "AliFMDGeometryBuilder.h"
#include "AliFMDRawWriter.h" // ALIFMDRAWWRITER_H
+#include "AliFMDRawReader.h" // ALIFMDRAWREADER_H
+#include "AliTrackReference.h"
+#include "AliFMDStripIndex.h"
+#include "AliFMDEncodedEdx.h"
+#include "AliFMDParameters.h"
+#include "AliFMDReconstructor.h"
//____________________________________________________________________
ClassImp(AliFMD)
-
-//____________________________________________________________________
-const Char_t* AliFMD::fgkShortLegName = "FSSL";
-const Char_t* AliFMD::fgkLongLegName = "FSLL";
+#if 0
+ ; // This is to keep Emacs from indenting the next line
+#endif
//____________________________________________________________________
AliFMD::AliFMD()
- : fInner(0),
- fOuter(0),
- fFMD1(0),
- fFMD2(0),
- fFMD3(0),
+ : AliDetector(),
fSDigits(0),
fNsdigits(0),
- fPrintboardRotationId(0),
- fIdentityRotationId(0),
- fShortLegId(0),
- fLongLegId(0),
- fLegLength(0),
- fLegRadius(0),
- fModuleSpacing(0),
- fSiDensity(0),
- fSiThickness(0),
- fSiDeDxMip(1.664),
- fVA1MipRange(0),
- fAltroChannelSize(0),
- fSampleRate(0)
+ fDetailed(kTRUE),
+ fUseOld(kFALSE),
+ fUseAssembly(kTRUE),
+ fBad(0)
{
//
// Default constructor for class AliFMD
//
- AliDebug(0, "\tDefault CTOR");
- fHits = 0;
- fDigits = 0;
- fIshunt = 0;
-}
-
-//____________________________________________________________________
-AliFMD::AliFMD(const AliFMD& other)
- : AliDetector(other),
- fInner(other.fInner),
- fOuter(other.fOuter),
- fFMD1(other.fFMD1),
- fFMD2(other.fFMD2),
- fFMD3(other.fFMD3),
- fSDigits(other.fSDigits),
- fNsdigits(other.fNsdigits),
- fPrintboardRotationId(other.fPrintboardRotationId),
- fIdentityRotationId(other.fIdentityRotationId),
- fShortLegId(other.fShortLegId),
- fLongLegId(other.fLongLegId),
- fLegLength(other.fLegLength),
- fLegRadius(other.fLegRadius),
- fModuleSpacing(other.fModuleSpacing),
- fSiDensity(other.fSiDensity),
- fSiThickness(other.fSiThickness),
- fSiDeDxMip(other.fSiDeDxMip),
- fVA1MipRange(other.fVA1MipRange),
- fAltroChannelSize(other.fAltroChannelSize),
- fSampleRate(other.fSampleRate)
-{
- // Copy constructor
+ AliFMDDebug(10, ("\tDefault CTOR"));
+ fHits = 0;
+ fDigits = 0;
+ fIshunt = 0;
+ // fBad = new TClonesArray("AliFMDHit");
}
//____________________________________________________________________
-AliFMD::AliFMD(const char *name, const char *title, bool detailed)
+AliFMD::AliFMD(const char *name, const char *title)
: AliDetector (name, title),
- fInner(0),
- fOuter(0),
- fFMD1(0),
- fFMD2(0),
- fFMD3(0),
fSDigits(0),
fNsdigits(0),
- fPrintboardRotationId(0),
- fIdentityRotationId(0),
- fShortLegId(0),
- fLongLegId(0),
- fLegLength(0),
- fLegRadius(0),
- fModuleSpacing(0),
- fSiDensity(0),
- fSiThickness(0),
- fSiDeDxMip(1.664),
- fVA1MipRange(0),
- fAltroChannelSize(0),
- fSampleRate(0)
+ fDetailed(kTRUE),
+ fUseOld(kFALSE),
+ fUseAssembly(kFALSE),
+ fBad(0)
{
//
// Standard constructor for Forward Multiplicity Detector
//
- AliDebug(0, "\tStandard CTOR");
-
+ AliFMDDebug(10, ("\tStandard CTOR"));
+ // fBad = new TClonesArray("AliFMDHit");
+
// Initialise Hit array
- HitsArray();
- gAlice->GetMCApp()->AddHitList(fHits);
+ // HitsArray();
+ // gAlice->GetMCApp()->AddHitList(fHits);
// (S)Digits for the detectors disk
- DigitsArray();
- SDigitsArray();
+ // DigitsArray();
+ // SDigitsArray();
// CHC: What is this?
fIshunt = 0;
- SetMarkerColor(kRed);
- SetLineColor(kYellow);
- SetSiDensity();
-
- // Create sub-volume managers
- fInner = new AliFMDRing('I', detailed);
- fOuter = new AliFMDRing('O', detailed);
- fFMD1 = new AliFMD1();
- fFMD2 = new AliFMD2();
- fFMD3 = new AliFMD3();
-
- // Specify parameters of sub-volume managers
- fFMD1->SetInner(fInner);
- fFMD1->SetOuter(0);
-
- fFMD2->SetInner(fInner);
- fFMD2->SetOuter(fOuter);
-
- fFMD3->SetInner(fInner);
- fFMD3->SetOuter(fOuter);
-
- SetLegLength();
- SetLegRadius();
- SetLegOffset();
- SetModuleSpacing();
- SetSiThickness();
- SetSiDensity();
- SetVA1MipRange();
- SetAltroChannelSize();
- SetSampleRate();
-
- fInner->SetLowR(4.3);
- fInner->SetHighR(17.2);
- fInner->SetWaferRadius(13.4/2);
- fInner->SetTheta(36/2);
- fInner->SetNStrips(512);
- fInner->SetSiThickness(fSiThickness);
- fInner->SetPrintboardThickness(.11);
- fInner->SetBondingWidth(.5);
-
- fOuter->SetLowR(15.6);
- fOuter->SetHighR(28.0);
- fOuter->SetWaferRadius(13.4/2);
- fOuter->SetTheta(18/2);
- fOuter->SetNStrips(256);
- fOuter->SetSiThickness(fSiThickness);
- fOuter->SetPrintboardThickness(.1);
- fOuter->SetBondingWidth(.5);
-
-
- fFMD1->SetHoneycombThickness(1);
- fFMD1->SetInnerZ(340.0);
-
- fFMD2->SetHoneycombThickness(1);
- fFMD2->SetInnerZ(83.4);
- fFMD2->SetOuterZ(75.2);
-
- fFMD3->SetHoneycombThickness(1);
- fFMD3->SetInnerZ(-62.8);
- fFMD3->SetOuterZ(-75.2);
+ //PH SetMarkerColor(kRed);
+ //PH SetLineColor(kYellow);
}
//____________________________________________________________________
delete fSDigits;
fSDigits = 0;
}
+ if (fBad) {
+ fBad->Delete();
+ delete fBad;
+ fBad = 0;
+ }
}
-//____________________________________________________________________
-AliFMD&
-AliFMD::operator=(const AliFMD& other)
-{
- AliDetector::operator=(other);
- fInner = other.fInner;
- fOuter = other.fOuter;
- fFMD1 = other.fFMD1;
- fFMD2 = other.fFMD2;
- fFMD3 = other.fFMD3;
- fSDigits = other.fSDigits;
- fNsdigits = other.fNsdigits;
- fSiDensity = other.fSiDensity;
- fPrintboardRotationId = other.fPrintboardRotationId;
- fIdentityRotationId = other.fIdentityRotationId;
- fShortLegId = other.fShortLegId;
- fLongLegId = other.fLongLegId;
- fLegLength = other.fLegLength;
- fLegRadius = other.fLegRadius;
- fModuleSpacing = other.fModuleSpacing;
- fSiDensity = other.fSiDensity;
- fSiThickness = other.fSiThickness;
- fVA1MipRange = other.fVA1MipRange;
- fAltroChannelSize = other.fAltroChannelSize;
- fSampleRate = other.fSampleRate;
-
- return *this;
-}
//====================================================================
//
{
//
// Create the geometry of Forward Multiplicity Detector. The actual
- // construction of the geometry is delegated to the class AliFMDRing
- // and AliFMDSubDetector and the relevant derived classes.
+ // construction of the geometry is delegated to the class
+ // AliFMDGeometryBuilder, invoked by the singleton manager
+ // AliFMDGeometry.
//
- // The flow of this member function is:
- //
- // FOR rings fInner and fOuter DO
- // AliFMDRing::Init();
- // END FOR
- //
- // Set up hybrud card support (leg) volume shapes
- //
- // FOR rings fInner and fOuter DO
- // AliFMDRing::SetupGeometry();
- // END FOR
- //
- // FOR subdetectors fFMD1, fFMD2, and fFMD3 DO
- // AliFMDSubDetector::SetupGeomtry();
- // END FOR
- //
- // FOR subdetectors fFMD1, fFMD2, and fFMD3 DO
- // AliFMDSubDetector::Geomtry();
- // END FOR
- //
-
- // DebugGuard guard("AliFMD::CreateGeometry");
- AliDebug(10, "\tCreating geometry");
-
- fInner->Init();
- fOuter->Init();
-
- Double_t par[3];
-
- Int_t airId = (*fIdtmed)[kAirId];
- Int_t alId = (*fIdtmed)[kAlId];
- Int_t cId = (*fIdtmed)[kCarbonId];
- Int_t siId = (*fIdtmed)[kSiId];
- Int_t pcbId = (*fIdtmed)[kPcbId];
- Int_t plaId = (*fIdtmed)[kPlasticId];
- Int_t pbId = fPrintboardRotationId;
- Int_t idId = fIdentityRotationId;
-
- par[0] = fLegRadius - .1;
- par[1] = fLegRadius;
- par[2] = fLegLength / 2;
- fShortLegId = gMC->Gsvolu(fgkShortLegName,"TUBE", plaId, par, 3);
-
- par[2] += fModuleSpacing / 2;
- fLongLegId = gMC->Gsvolu(fgkLongLegName,"TUBE", plaId, par, 3);
-
- fInner->SetupGeometry(airId, siId, pcbId, pbId, idId);
- fOuter->SetupGeometry(airId, siId, pcbId, pbId, idId);
-
- fFMD1->SetupGeometry(airId, alId, cId);
- fFMD2->SetupGeometry(airId, alId, cId);
- fFMD3->SetupGeometry(airId, alId, cId);
-
- fFMD1->Geometry("ALIC", pbId, idId);
- fFMD2->Geometry("ALIC", pbId, idId);
- fFMD3->Geometry("ALIC", pbId, idId);
+ AliFMDGeometry* fmd = AliFMDGeometry::Instance();
+ fmd->SetDetailed(fDetailed);
+ fmd->UseAssembly(fUseAssembly);
+ fmd->Build();
}
//____________________________________________________________________
void AliFMD::CreateMaterials()
{
- // Register various materials and tracking mediums with the
- // backend.
- //
- // Currently defined materials and mediums are
- //
- // FMD Air Normal air
- // FMD Si Active silicon of sensors
- // FMD Carbon Normal carbon used in support, etc.
- // FMD Kapton Carbon used in Honeycomb
- // FMD PCB Printed circuit board material
- // FMD Plastic Material for support legs
+ // Define the materials and tracking mediums needed by the FMD
+ // simulation. These mediums are made by sending the messages
+ // AliMaterial, AliMixture, and AliMedium to the passed AliModule
+ // object module. The defined mediums are
//
- // Also defined are two rotation matricies.
+ // FMD Si$ Silicon (active medium in sensors)
+ // FMD C$ Carbon fibre (support cone for FMD3 and vacuum pipe)
+ // FMD Al$ Aluminium (honeycomb support plates)
+ // FMD PCB$ Printed Circuit Board (FEE board with VA1_3)
+ // FMD Chip$ Electronics chips (currently not used)
+ // FMD Air$ Air (Air in the FMD)
+ // FMD Plastic$ Plastic (Support legs for the hybrid cards)
//
- // DebugGuard guard("AliFMD::CreateMaterials");
- AliDebug(10, "\tCreating materials");
+ // The geometry builder should really be the one that creates the
+ // materials, but the architecture of AliROOT makes that design
+ // akward. What should happen, was that the AliFMDGeometryBuilder
+ // made the mediums, and that this class retrives pointers from the
+ // TGeoManager, and registers the mediums here. Alas, it's not
+ // really that easy.
+ //
+ AliFMDDebug(10, ("\tCreating materials"));
+ // Get pointer to geometry singleton object.
+ AliFMDGeometry* geometry = AliFMDGeometry::Instance();
+ geometry->Init();
+#if 0
+ if (gGeoManager && gGeoManager->GetMedium("FMD Si$")) {
+ // We need to figure out the some stuff about the geometry
+ fmd->ExtractGeomInfo();
+ return;
+ }
+#endif
Int_t id;
Double_t a = 0;
Double_t z = 0;
Double_t density = 0;
Double_t radiationLength = 0;
Double_t absorbtionLength = 999;
- Int_t fieldType = gAlice->Field()->Integ(); // Field type
- Double_t maxField = gAlice->Field()->Max(); // Field max.
+ Int_t fieldType = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ(); // Field type
+ Double_t maxField = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max(); // Field max.
Double_t maxBending = 0; // Max Angle
Double_t maxStepSize = 0.001; // Max step size
Double_t maxEnergyLoss = 1; // Max Delta E
// Silicon
a = 28.0855;
z = 14.;
- density = fSiDensity;
+ density = geometry->GetSiDensity();
radiationLength = 9.36;
maxBending = 1;
maxStepSize = .001;
precision = .001;
minStepSize = .001;
id = kSiId;
- AliMaterial(id, "FMD Si$", a, z, density, radiationLength, absorbtionLength);
- AliMedium(kSiId, "FMD Si$",id,1,fieldType,maxField,maxBending,
+ AliMaterial(id, "Si$", a, z, density, radiationLength, absorbtionLength);
+ AliMedium(kSiId, "Si$", id,1,fieldType,maxField,maxBending,
maxStepSize,maxEnergyLoss,precision,minStepSize);
-
+
// Carbon
a = 12.011;
precision = .003;
minStepSize = .003;
id = kCarbonId;
- AliMaterial(id, "FMD Carbon$", a, z, density, radiationLength,
- absorbtionLength);
- AliMedium(kCarbonId, "FMD Carbon$",id,0,fieldType,maxField,maxBending,
- maxStepSize,maxEnergyLoss,precision,minStepSize);
+ AliMaterial(id, "Carbon$", a, z, density, radiationLength, absorbtionLength);
+ AliMedium(kCarbonId, "Carbon$", id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
// Aluminum
a = 26.981539;
density = 2.7;
radiationLength = 8.9;
id = kAlId;
- AliMaterial(id, "FMD Aluminum$", a, z, density, radiationLength,
- absorbtionLength);
- AliMedium(kAlId, "FMD Aluminum$", id, 0, fieldType, maxField, maxBending,
+ AliMaterial(id, "Aluminum$",a,z, density, radiationLength, absorbtionLength);
+ AliMedium(kAlId, "Aluminum$", id, 0, fieldType, maxField, maxBending,
maxStepSize, maxEnergyLoss, precision, minStepSize);
+ // Copper
+ a = 63.546;
+ z = 29;
+ density = 8.96;
+ radiationLength = 1.43;
+ id = kCopperId;
+ AliMaterial(id, "Copper$",
+ a, z, density, radiationLength, absorbtionLength);
+ AliMedium(kCopperId, "Copper$", id, 0, fieldType, maxField, maxBending,
+ maxStepSize, maxEnergyLoss, precision, minStepSize);
+
+
// Silicon chip
{
Float_t as[] = { 12.0107, 14.0067, 15.9994,
- 1.00794, 28.0855, 107.8682 };
+ 1.00794, 28.0855, 107.8682 };
Float_t zs[] = { 6., 7., 8.,
1., 14., 47. };
Float_t ws[] = { 0.039730642, 0.001396798, 0.01169634,
0.004367771, 0.844665, 0.09814344903 };
- density = 2.36436;
+ density = 2.36436;
maxBending = 10;
maxStepSize = .01;
precision = .003;
minStepSize = .003;
- id = kSiChipId;
- AliMixture(id, "FMD Si Chip$", as, zs, density, 6, ws);
- AliMedium(kSiChipId, "FMD Si Chip$", id, 0, fieldType, maxField,
- maxBending, maxStepSize, maxEnergyLoss, precision, minStepSize);
+ id = kSiChipId;
+ AliMixture(id, "Si Chip$", as, zs, density, 6, ws);
+ AliMedium(kSiChipId, "Si Chip$", id, 0, fieldType, maxField, maxBending,
+ maxStepSize, maxEnergyLoss, precision, minStepSize);
}
-#if 0
// Kaption
{
Float_t as[] = { 1.00794, 12.0107, 14.010, 15.9994};
maxStepSize = .001;
precision = .001;
minStepSize = .001;
- id = KaptionId;
- AliMixture(id, "FMD Kaption$", as, zs, density, 4, ws);
- AliMedium(kAlId, "FMD Kaption$",id,0,fieldType,maxField,maxBending,
+ id = kKaptonId;
+ AliMixture(id, "Kaption$", as, zs, density, 4, ws);
+ AliMedium(kKaptonId, "Kaption$", id,0,fieldType,maxField,maxBending,
maxStepSize,maxEnergyLoss,precision,minStepSize);
}
-#endif
// Air
{
precision = .001;
minStepSize = .001;
id = kAirId;
- AliMixture(id, "FMD Air$", as, zs, density, 4, ws);
- AliMedium(kAirId, "FMD Air$", id,0,fieldType,maxField,maxBending,
+ AliMixture(id, "Air$", as, zs, density, 4, ws);
+ AliMedium(kAirId, "Air$", id,0,fieldType,maxField,maxBending,
maxStepSize,maxEnergyLoss,precision,minStepSize);
}
precision = .001;
minStepSize = .001;
id = kPcbId;
- AliMixture(id, "FMD PCB$", as, zs, density, 14, ws);
- AliMedium(kPcbId, "FMD PCB$", id,0,fieldType,maxField,maxBending,
+ AliMixture(id, "PCB$", as, zs, density, 14, ws);
+ AliMedium(kPcbId, "PCB$", id,0,fieldType,maxField,maxBending,
maxStepSize,maxEnergyLoss,precision,minStepSize);
}
+ // Stainless steel
+ {
+ Float_t as[] = { 55.847, 51.9961, 58.6934, 28.0855 };
+ Float_t zs[] = { 26., 24., 28., 14. };
+ Float_t ws[] = { .715, .18, .1, .005 };
+ density = 7.88;
+ id = kSteelId;
+ AliMixture(id, "Steel$", as, zs, density, 4, ws);
+ AliMedium(kSteelId, "Steel$", id, 0, fieldType, maxField, maxBending,
+ maxStepSize, maxEnergyLoss, precision, minStepSize);
+ }
// Plastic
{
Float_t as[] = { 1.01, 12.01 };
precision = .003;
minStepSize = .003;
id = kPlasticId;
- AliMixture(id, "FMD Plastic$", as, zs, density, -2, ws);
- AliMedium(kPlasticId, "FMD Plastic$", id,0,fieldType,maxField,maxBending,
- maxStepSize,maxEnergyLoss,precision,minStepSize);
+ AliMixture(id, "Plastic$", as, zs, density, -2, ws);
+ AliMedium(kPlasticId, "Plastic$", id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
}
- AliMatrix(fPrintboardRotationId, 90, 90, 0, 90, 90, 0);
- AliMatrix(fIdentityRotationId, 90, 0, 90, 90, 0, 0);
+
}
+#if 0
//____________________________________________________________________
void
-AliFMD::Init()
+AliFMD::SetTrackingParameters(Int_t imed,
+ Float_t gamma,
+ Float_t electron,
+ Float_t neutral_hadron,
+ Float_t charged_hadron,
+ Float_t muon,
+ Float_t electron_bremstrahlung,
+ Float_t muon__bremstrahlung,
+ Float_t electron_delta,
+ Float_t muon_delta,
+ Float_t muon_pair,
+ Int_t annihilation,
+ Int_t bremstrahlung,
+ Int_t compton_scattering,
+ Int_t decay,
+ Int_t delta_ray,
+ Int_t hadronic,
+ Int_t energy_loss,
+ Int_t multiple_scattering,
+ Int_t pair_production,
+ Int_t photon_production,
+ Int_t rayleigh_scattering)
{
- //
- // Initialis the FMD after it has been built
- Int_t i;
- //
- if (fDebug) {
- cout << "\n" << ClassName() << ": " << flush;
- for (i = 0; i < 35; i++) cout << "*";
- cout << " FMD_INIT ";
- for (i = 0; i < 35; i++) cout << "*";
- cout << "\n" << ClassName() << ": " << flush;
- //
- // Here the FMD initialisation code (if any!)
- for (i = 0; i < 80; i++) cout << "*";
- cout << endl;
- }
- //
- //
+ // Disabled by request of FCA, kept for reference only
+ if (!gMC) return;
+ TArrayI& idtmed = *(GetIdtmed());
+ Int_t iimed = idtmed[imed];
+ // gMC->Gstpar(iimed, "CUTGAM", gamma);
+ // gMC->Gstpar(iimed, "CUTELE", electron);
+ // gMC->Gstpar(iimed, "CUTNEU", neutral_hadron);
+ // gMC->Gstpar(iimed, "CUTHAD", charged_hadron);
+ // gMC->Gstpar(iimed, "CUTMUO", muon);
+ // gMC->Gstpar(iimed, "BCUTE", electron_bremstrahlung);
+ // gMC->Gstpar(iimed, "BCUTM", muon__bremstrahlung);
+ // gMC->Gstpar(iimed, "DCUTE", electron_delta);
+ // gMC->Gstpar(iimed, "DCUTM", muon_delta);
+ // gMC->Gstpar(iimed, "PPCUTM", muon_pair);
+ // gMC->Gstpar(iimed, "ANNI", Float_t(annihilation));
+ // gMC->Gstpar(iimed, "BREM", Float_t(bremstrahlung));
+ // gMC->Gstpar(iimed, "COMP", Float_t(compton_scattering));
+ // gMC->Gstpar(iimed, "DCAY", Float_t(decay));
+ // gMC->Gstpar(iimed, "DRAY", Float_t(delta_ray));
+ // gMC->Gstpar(iimed, "HADR", Float_t(hadronic));
+ // gMC->Gstpar(iimed, "LOSS", Float_t(energy_loss));
+ // gMC->Gstpar(iimed, "MULS", Float_t(multiple_scattering));
+ // gMC->Gstpar(iimed, "PAIR", Float_t(pair_production));
+ // gMC->Gstpar(iimed, "PHOT", Float_t(photon_production));
+ // gMC->Gstpar(iimed, "RAYL", Float_t(rayleigh_scattering));
}
+#endif
-//====================================================================
-//
-// Graphics and event display
-//
//____________________________________________________________________
-void
-AliFMD::BuildGeometry()
+void
+AliFMD::Init()
{
- //
- // Build simple ROOT TNode geometry for event display
- //
- // Build a simplified geometry of the FMD used for event display
+ // Initialize the detector
//
- // The actual building of the TNodes is done by
- // AliFMDSubDetector::SimpleGeometry.
- AliDebug(10, "\tCreating a simplified geometry");
-
- TNode* top = gAlice->GetGeometry()->GetNode("alice");
-
- fFMD1->SimpleGeometry(fNodes, top, GetLineColor(), 0);
- fFMD2->SimpleGeometry(fNodes, top, GetLineColor(), 0);
- fFMD3->SimpleGeometry(fNodes, top, GetLineColor(), 0);
+ AliFMDDebug(1, ("Initialising FMD detector object"));
+ TVirtualMC* mc = TVirtualMC::GetMC();
+ AliFMDGeometry* fmd = AliFMDGeometry::Instance();
+ TArrayI actGeo = fmd->ActiveIds();
+ bool valid = true;
+ if (actGeo.fN <= 0) valid = false;
+ else {
+ for (int i = 0; i < actGeo.fN; i++) {
+ if (actGeo[i] < 0) {
+ valid = false;
+ break;
+ }
+ }
+ }
+ if (!valid) {
+ AliFMDDebug(1, ("Extracting geometry info from loaded geometry"));
+ fmd->ExtractGeomInfo();
+ actGeo = fmd->ActiveIds();
+ }
+ TArrayI actVmc(actGeo.fN);
+ for (Int_t i = 0; i < actGeo.fN; i++) {
+ if (actGeo[i] < 0) {
+ AliError(Form("Invalid id: %d", actGeo[i]));
+ continue;
+ }
+ TGeoVolume *sens = gGeoManager->GetVolume(actGeo[i]);
+ if (!sens) {
+ AliError(Form("No TGeo volume for sensitive volume ID=%d",actGeo[i]));
+ continue;
+ }
+ actVmc[i] = mc->VolId(sens->GetName());
+ AliFMDDebug(1, ("Active vol id # %d: %d changed to %d",
+ i, actGeo[i], actVmc[i]));
+ }
+ fmd->SetActive(actVmc.fArray, actVmc.fN);
+ // fmd->InitTransformations();
}
//____________________________________________________________________
-void
-AliFMD::DrawDetector()
+void
+AliFMD::FinishEvent()
{
- //
- // Draw a shaded view of the Forward multiplicity detector
- //
- // DebugGuard guard("AliFMD::DrawDetector");
- AliDebug(10, "\tDraw detector");
-
- //Set ALIC mother transparent
- gMC->Gsatt("ALIC","SEEN",0);
- gMC->Gsatt(fgkShortLegName,"SEEN",1);
- gMC->Gsatt(fgkLongLegName,"SEEN",1);
-
- //Set volumes visible
- fFMD1->Gsatt();
- fFMD2->Gsatt();
- fFMD3->Gsatt();
- fInner->Gsatt();
- fOuter->Gsatt();
-
- //
- gMC->Gdopt("hide", "on");
- gMC->Gdopt("shad", "on");
- gMC->Gsatt("*", "fill", 7);
- gMC->SetClipBox(".");
- gMC->SetClipBox("*", 0, 1000, -1000, 1000, -1000, 1000);
- gMC->DefaultRange();
- gMC->Gdraw("alic", 40, 30, 0, 12, 12, .055, .055);
- gMC->Gdhead(1111, "Forward Multiplicity Detector");
- gMC->Gdman(16, 10, "MAN");
- gMC->Gdopt("hide", "off");
+ // Called at the end of the an event in simulations. If the debug
+ // level is high enough, then the `bad' hits are printed.
+ //
+ if (AliLog::GetDebugLevel("FMD", "AliFMD") < 10) return;
+ if (fBad && fBad->GetEntries() > 0) {
+ AliWarning(Form("got %d 'bad' hits", fBad->GetEntries()));
+ TIter next(fBad);
+ AliFMDHit* hit;
+ while ((hit = static_cast<AliFMDHit*>(next()))) hit->Print("D");
+ fBad->Clear();
+ }
}
-//____________________________________________________________________
-Int_t
-AliFMD::DistanceToPrimitive(Int_t, Int_t)
-{
- //
- // Calculate the distance from the mouse to the FMD on the screen
- // Dummy routine
- //
- return 9999;
-}
+
//====================================================================
//
}
}
-
-
//____________________________________________________________________
void
AliFMD::SetHitsAddressBranch(TBranch *b)
// Set the TClonesArray to read hits into.
b->SetAddress(&fHits);
}
+//____________________________________________________________________
+void
+AliFMD::SetSDigitsAddressBranch(TBranch *b)
+{
+ // Set the TClonesArray to read hits into.
+ b->SetAddress(&fSDigits);
+}
//____________________________________________________________________
void
// hits[9] [Float_t ] Time when the track hit
//
//
- AddHit(track,
- UShort_t(vol[0]), // Detector #
- Char_t(vol[1]), // Ring ID
- UShort_t(vol[2]), // Sector #
- UShort_t(vol[3]), // Strip #
- hits[0], // X
- hits[1], // Y
- hits[2], // Z
- hits[3], // Px
- hits[4], // Py
- hits[5], // Pz
- hits[6], // Energy loss
- Int_t(hits[7]), // PDG
- hits[8]); // Time
+ AddHitByFields(track,
+ UShort_t(vol[0]), // Detector #
+ Char_t(vol[1]), // Ring ID
+ UShort_t(vol[2]), // Sector #
+ UShort_t(vol[3]), // Strip #
+ hits[0], // X
+ hits[1], // Y
+ hits[2], // Z
+ hits[3], // Px
+ hits[4], // Py
+ hits[5], // Pz
+ hits[6], // Energy loss
+ Int_t(hits[7]), // PDG
+ hits[8]); // Time
}
//____________________________________________________________________
-void
-AliFMD::AddHit(Int_t track,
- UShort_t detector,
- Char_t ring,
- UShort_t sector,
- UShort_t strip,
- Float_t x,
- Float_t y,
- Float_t z,
- Float_t px,
- Float_t py,
- Float_t pz,
- Float_t edep,
- Int_t pdg,
- Float_t t)
+AliFMDHit*
+AliFMD::AddHitByFields(Int_t track,
+ UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip,
+ Float_t x,
+ Float_t y,
+ Float_t z,
+ Float_t px,
+ Float_t py,
+ Float_t pz,
+ Float_t edep,
+ Int_t pdg,
+ Float_t t,
+ Float_t l,
+ Bool_t stop)
{
- //
// Add a hit to the list
//
// Parameters:
// edep Energy deposited by track
// pdg Track's particle Id #
// t Time when the track hit
+ // l Track length through the material.
+ // stop Whether track was stopped or disappeared
//
TClonesArray& a = *(HitsArray());
// Search through the list of already registered hits, and see if we
// a new hit, but rather update the energy deposited in the hit.
// This is done, so that a FLUKA based simulation will get the
// number of hits right, not just the enerrgy deposition.
+ AliFMDHit* hit = 0;
for (Int_t i = 0; i < fNhits; i++) {
if (!a.At(i)) continue;
- AliFMDHit* hit = static_cast<AliFMDHit*>(a.At(i));
+ hit = static_cast<AliFMDHit*>(a.At(i));
if (hit->Detector() == detector
&& hit->Ring() == ring
&& hit->Sector() == sector
&& hit->Strip() == strip
&& hit->Track() == track) {
- Warning("AddHit", "already had a hit in FMD%d%c[%2d,%3d] for track # %d,"
- " adding energy (%f) to that hit (%f) -> %f",
- detector, ring, sector, strip, track, edep, hit->Edep(),
- hit->Edep() + edep);
+ AliFMDDebug(1, ("already had a hit in FMD%d%c[%2d,%3d] for track # %d,"
+ " adding energy (%f) to that hit (%f) -> %f",
+ detector, ring, sector, strip, track, edep, hit->Edep(),
+ hit->Edep() + edep));
hit->SetEdep(hit->Edep() + edep);
- return;
+ return hit;
}
}
// If hit wasn't already registered, do so know.
- new (a[fNhits]) AliFMDHit(fIshunt, track, detector, ring, sector, strip,
- x, y, z, px, py, pz, edep, pdg, t);
+ hit = new (a[fNhits]) AliFMDHit(fIshunt, track, detector, ring, sector,
+ strip, x, y, z, px, py, pz, edep, pdg, t,
+ l, stop);
+ // gMC->AddTrackReference(track, 12);
fNhits++;
+
+ //Reference track
+
+ AliMC *mcApplication = (AliMC*)gAlice->GetMCApp();
+
+ AliTrackReference* trackRef =
+ AddTrackReference(mcApplication->GetCurrentTrackNumber(),
+ AliTrackReference::kFMD);
+ UInt_t stripId = AliFMDStripIndex::Pack(detector,ring,sector,strip);
+ UInt_t dedx = AliFMDEncodedEdx::Encode(edep, l);
+
+ trackRef->SetUserId((dedx << 19) | stripId);
+
+
+ return hit;
}
//____________________________________________________________________
void
-AliFMD::AddDigit(Int_t* digits)
+AliFMD::AddDigit(Int_t* digits, Int_t*)
{
// Add a digit to the Digit tree
//
// digits[5] [Short_t] ADC Count, -1 if not used
// digits[6] [Short_t] ADC Count, -1 if not used
//
- AddDigit(UShort_t(digits[0]), // Detector #
- Char_t(digits[1]), // Ring ID
- UShort_t(digits[2]), // Sector #
- UShort_t(digits[3]), // Strip #
- UShort_t(digits[4]), // ADC Count1
- Short_t(digits[5]), // ADC Count2
- Short_t(digits[6])); // ADC Count3
+ AddDigitByFields(UShort_t(digits[0]), // Detector #
+ Char_t(digits[1]), // Ring ID
+ UShort_t(digits[2]), // Sector #
+ UShort_t(digits[3]), // Strip #
+ UShort_t(digits[4]), // ADC Count1
+ Short_t(digits[5]), // ADC Count2
+ Short_t(digits[6]), // ADC Count3
+ Short_t(digits[7]));
}
//____________________________________________________________________
void
-AliFMD::AddDigit(UShort_t detector,
- Char_t ring,
- UShort_t sector,
- UShort_t strip,
- UShort_t count1,
- Short_t count2,
- Short_t count3)
+AliFMD::AddDigitByFields(UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip,
+ UShort_t count1,
+ Short_t count2,
+ Short_t count3,
+ Short_t count4,
+ UShort_t nrefs,
+ Int_t* refs)
{
// add a real digit - as coming from data
//
// count3 ADC count (a 10-bit word), or -1 if not used
TClonesArray& a = *(DigitsArray());
+ AliFMDDebug(15, ("Adding digit # %5d/%5d for FMD%d%c[%2d,%3d]"
+ "=(%d,%d,%d,%d) with %d tracks",
+ fNdigits-1, a.GetEntriesFast(),
+ detector, ring, sector, strip,
+ count1, count2, count3, count4, nrefs));
new (a[fNdigits++])
- AliFMDDigit(detector, ring, sector, strip, count1, count2, count3);
+ AliFMDDigit(detector, ring, sector, strip,
+ count1, count2, count3, count4, nrefs, refs);
+
}
//____________________________________________________________________
// digits[6] [Short_t] ADC Count, -1 if not used
// digits[7] [Short_t] ADC Count, -1 if not used
//
- AddSDigit(UShort_t(digits[0]), // Detector #
- Char_t(digits[1]), // Ring ID
- UShort_t(digits[2]), // Sector #
- UShort_t(digits[3]), // Strip #
- Float_t(digits[4]), // Edep
- UShort_t(digits[5]), // ADC Count1
- Short_t(digits[6]), // ADC Count2
- Short_t(digits[7])); // ADC Count3
+ AddSDigitByFields(UShort_t(digits[0]), // Detector #
+ Char_t(digits[1]), // Ring ID
+ UShort_t(digits[2]), // Sector #
+ UShort_t(digits[3]), // Strip #
+ Float_t(digits[4]), // Edep
+ UShort_t(digits[5]), // ADC Count1
+ Short_t(digits[6]), // ADC Count2
+ Short_t(digits[7]), // ADC Count3
+ Short_t(digits[8]), // ADC Count4
+ UShort_t(digits[9]), // N particles
+ UShort_t(digits[10])); // N primaries
}
//____________________________________________________________________
void
-AliFMD::AddSDigit(UShort_t detector,
- Char_t ring,
- UShort_t sector,
- UShort_t strip,
- Float_t edep,
- UShort_t count1,
- Short_t count2,
- Short_t count3)
+AliFMD::AddSDigitByFields(UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip,
+ Float_t edep,
+ UShort_t count1,
+ Short_t count2,
+ Short_t count3,
+ Short_t count4,
+ UShort_t ntot,
+ UShort_t nprim,
+ Int_t* refs)
{
// add a summable digit
//
// count3 ADC count (a 10-bit word), or -1 if not used
//
TClonesArray& a = *(SDigitsArray());
+ // AliFMDDebug(0, ("Adding sdigit # %d", fNsdigits));
+ AliFMDDebug(15, ("Adding sdigit # %5d/%5d for FMD%d%c[%2d,%3d]"
+ "=(%d,%d,%d,%d) with %d tracks %d primaries (%p)",
+ fNsdigits-1, a.GetEntriesFast(),
+ detector, ring, sector, strip,
+ count1, count2, count3, count4, ntot, nprim, refs));
new (a[fNsdigits++])
- AliFMDSDigit(detector, ring, sector, strip, edep, count1, count2, count3);
+ AliFMDSDigit(detector, ring, sector, strip, edep,
+ count1, count2, count3, count4, ntot, nprim, refs);
}
//____________________________________________________________________
void
AliFMD::ResetSDigits()
{
- //
- // Reset number of digits and the digits array for this detector
+ // Reset number of digits and the digits array for this detector.
//
fNsdigits = 0;
if (fSDigits) fSDigits->Clear();
if (!fHits) {
fHits = new TClonesArray("AliFMDHit", 1000);
fNhits = 0;
+ if (gAlice && gAlice->GetMCApp() && gAlice->GetMCApp()->GetHitLists())
+ gAlice->GetMCApp()->AddHitList(fHits);
}
return fHits;
}
// Create AliFMDDigit's from AliFMDHit's. This is done by making a
// AliFMDDigitizer, and executing that code.
//
- AliRunDigitizer* manager = new AliRunDigitizer(1, 1);
- manager->SetInputStream(0, "galice.root");
- manager->SetOutputFile("H2Dfile");
-
- /* AliDigitizer* dig =*/ CreateDigitizer(manager);
- manager->Exec("");
+ AliFMDHitDigitizer digitizer(this, AliFMDHitDigitizer::kDigits);
+ digitizer.Init();
+ digitizer.Digitize("");
}
//____________________________________________________________________
// Create AliFMDSDigit's from AliFMDHit's. This is done by creating
// an AliFMDSDigitizer object, and executing it.
//
- AliFMDSDigitizer* digitizer = new AliFMDSDigitizer("galice.root");
- digitizer->SetSampleRate(fSampleRate);
- digitizer->SetVA1MipRange(fVA1MipRange);
- digitizer->SetAltroChannelSize(fAltroChannelSize);
- digitizer->Exec("");
+ AliFMDHitDigitizer digitizer(this, AliFMDHitDigitizer::kSDigits);
+ digitizer.Init();
+ digitizer.Digitize("");
}
//____________________________________________________________________
AliDigitizer*
-AliFMD::CreateDigitizer(AliRunDigitizer* manager) const
+AliFMD::CreateDigitizer(AliDigitizationInput* digInput) const
{
// Create a digitizer object
- AliFMDDigitizer* digitizer = new AliFMDDigitizer(manager);
- digitizer->SetSampleRate(fSampleRate);
- digitizer->SetVA1MipRange(fVA1MipRange);
- digitizer->SetAltroChannelSize(fAltroChannelSize);
+
+ /* This is what we probably _should_ do */
+ AliFMDBaseDigitizer* digitizer = 0;
+
+#ifdef USE_SSDIGITIZER
+ digitizer = new AliFMDSSDigitizer(digInput);
+#else
+ /* This is what we actually do, and will work */
+#if 0
+ AliInfo("SDigit->Digit conversion not really supported, "
+ "doing Hit->Digit conversion instead");
+#endif
+ digitizer = new AliFMDDigitizer(digInput);
+#endif
return digitizer;
}
// This uses the class AliFMDRawWriter to do the job. Please refer
// to that class for more information.
AliFMDRawWriter writer(this);
- writer.SetSampleRate(fSampleRate);
writer.Exec();
}
-//==================================================================
+//====================================================================
//
-// Various setter functions for the common paramters
+// Raw data reading
//
-
//__________________________________________________________________
-void
-AliFMD::SetLegLength(Double_t length)
+Bool_t
+AliFMD::Raw2SDigits(AliRawReader* reader)
{
- // Set lenght of plastic legs that hold the hybrid (print board and
- // silicon sensor) onto the honeycomp support
- //
- AliDebug(10, Form("\tLeg length set to %lf cm", length));
- fLegLength = length;
- fInner->SetLegLength(fLegLength);
- fOuter->SetLegLength(fLegLength);
-}
-
-//__________________________________________________________________
-void
-AliFMD::SetLegOffset(Double_t offset)
-{
- // Set offset from edge of hybrid to plastic legs that hold the
- // hybrid (print board and silicon sensor) onto the honeycomp
- // support
- //
- AliDebug(10, Form("\tLeg offset set to %lf cm", offset));
- fInner->SetLegOffset(offset);
- fOuter->SetLegOffset(offset);
-}
-
-//__________________________________________________________________
-void
-AliFMD::SetLegRadius(Double_t radius)
-{
- // Set the diameter of the plastic legs that hold the hybrid (print
- // board and silicon sensor) onto the honeycomp support
- //
- AliDebug(10, Form("\tLeg radius set to %lf cm", radius));
- fLegRadius = radius;
- fInner->SetLegRadius(fLegRadius);
- fOuter->SetLegRadius(fLegRadius);
+ // Turn digits into raw data.
+ //
+ // This uses the class AliFMDRawWriter to do the job. Please refer
+ // to that class for more information.
+ AliFMDParameters::Instance()->Init();
+ MakeTree("S");
+ MakeBranch("S");
+
+ TClonesArray* sdigits = SDigits();
+ AliFMDReconstructor rec;
+
+ // The two boolean arguments
+ // Make sdigits instead of digits
+ // Subtract the pedestal off the signal
+ rec.Digitize(reader, sdigits);
+ //
+ // Bool_t ret = fmdReader.ReadAdcs(sdigits, kTRUE, kTRUE);
+ // sdigits->ls();
+ UShort_t ns = sdigits->GetEntriesFast();
+ if (AliLog::GetDebugLevel("FMD", 0) > 5) {
+ for (UShort_t i = 0; i < ns; i++)
+ sdigits->At(i)->Print("pl");
+ }
+ AliFMDDebug(1, ("Got a total of %d SDigits", ns));
+
+ fLoader->TreeS()->Fill();
+ ResetSDigits();
+ fLoader->WriteSDigits("OVERWRITE");
+
+ return kTRUE;
}
-//__________________________________________________________________
-void
-AliFMD::SetModuleSpacing(Double_t spacing)
-{
- // Set the distance between the front and back sensor modules
- // (module staggering).
- //
- AliDebug(10, Form("\tModule spacing set to %lf cm", spacing));
- fModuleSpacing = spacing;
- fInner->SetModuleSpacing(fModuleSpacing);
- fOuter->SetModuleSpacing(fModuleSpacing);
-}
//====================================================================
//
{
// Browse this object.
//
- AliDebug(30, "\tBrowsing the FMD");
+ AliFMDDebug(30, ("\tBrowsing the FMD"));
AliDetector::Browse(b);
- if (fInner) b->Add(fInner, "Inner Ring");
- if (fOuter) b->Add(fOuter, "Outer Ring");
- if (fFMD1) b->Add(fFMD1, "FMD1 SubDetector");
- if (fFMD2) b->Add(fFMD2, "FMD2 SubDetector");
- if (fFMD3) b->Add(fFMD3, "FMD3 SubDetector");
+ b->Add(AliFMDGeometry::Instance());
}
-
+//____________________________________________________________________
+void
+AliFMD::AddAlignableVolumes() const
+{
+ //
+ // Create entries for alignable volumes associating the symbolic volume
+ // name with the corresponding volume path. Needs to be syncronized with
+ // eventual changes in the geometry.
+ //
+ // This code was made by Raffaele Grosso <rgrosso@mail.cern.ch>. I
+ // (cholm) will probably want to change it. For one, I think it
+ // should be the job of the geometry manager to deal with this.
+ AliInfo("Add FMD alignable volumes");
+ AliFMDGeometry::Instance()->SetAlignableVolumes();
+#if 0
+ for(size_t f = 1; f <= 3; f++){ // Detector 1,2,3
+ for(size_t tb = 0; tb <2 ; tb++){ // Top/Bottom
+ char stb = tb == 0 ? 'T' : 'B';
+ unsigned min = tb == 0 ? 0 : 5;
+
+ TString halfVol(Form("/ALIC_1/F%dM%c_%d", f, stb, f));
+ TString halfSym(halfVol);
+ if(!gGeoManager->SetAlignableEntry(halfSym.Data(),halfVol.Data()))
+ AliFatal(Form("Alignable entry %s not created. "
+ "Volume path %s not valid",
+ halfSym.Data(),halfVol.Data()));
+ for(size_t io = 0; io < 2; io++){ // inner, outer
+ if (f==1 && io==1) continue; // Only one ring in FMD1
+ if(tb == 1 && io==1) min=10;
+ char sio = (io == 0 ? 'I' : 'O');
+ unsigned nio = (io == 0 ? 3 : 9);
+ unsigned max = (io == 0 ? 5 : 10) + min;
+
+ for(size_t i = min; i < max; i++) { // Modules
+ TString modVol(Form("%s/F%c%cV_7%d/F%cSE_%d", halfVol.Data(),
+ sio, stb, nio, sio, i));
+ TString modSym(modVol);
+ if(!gGeoManager->SetAlignableEntry(modSym.Data(),modVol.Data()))
+ AliFatal(Form("Alignable entry %s not created. "
+ "Volume path %s not valid",
+ modSym.Data(), modVol.Data()));
+ }
+ }
+ }
+ }
+#endif
+}
//___________________________________________________________________
//
// EOF