#include <TGeoXtru.h> //CradleBaseVolume()
#include <TGeoCompositeShape.h> //CradleBaseVolume()
#include <TString.h> //StepManager()
+#include "AliGeomManager.h" //AddAlignableVolumes()
+
ClassImp(AliHMPIDv3)
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
void AliHMPIDv3::AddAlignableVolumes()const
// Arguments: none
// Returns: none
+ AliGeomManager::ELayerID idHMPID = AliGeomManager::kHMPID;
+ Int_t modUID, modnum = 0;
+
TGeoHMatrix *pGm = new TGeoHMatrix;
Double_t trans[3]={0.5*131.24,0.5*126.16,0}; //translation from LORS to TGeo RS (half size AllX, half size allY,0)
pGm->SetTranslation(trans);
Double_t ph[7]={10.,10., 30.,30.,30. ,50.,50};
for(Int_t iCh=AliHMPIDParam::kMinCh;iCh<=AliHMPIDParam::kMaxCh;iCh++) {
- gGeoManager->SetAlignableEntry(Form("/HMPID/Chamber%i",iCh),Form("ALIC_1/Hmp%i_0",iCh)); //aligment without AliCluster3D
- //Get Tracking To Local matrcies for alignment with AliCluster3D
- TGeoPNEntry *eCh = gGeoManager->GetAlignableEntry(Form("/HMPID/Chamber%i",iCh));
- if (eCh) {
- const char *path = eCh->GetTitle();
- if (!gGeoManager->cd(path)) {
- AliFatal(Form("Volume path %s not valid!",path));
- }
- TGeoHMatrix *globMatrix = gGeoManager->GetCurrentMatrix();
- //Double_t phi = 20.0 * ((iCh+1) / 3) + 10.0;
- Double_t phi = ph[iCh];
- TGeoHMatrix *t2l = new TGeoHMatrix();
- t2l->RotateZ(phi);
- t2l->MultiplyLeft(&(globMatrix->Inverse()));
- eCh->SetMatrix(t2l);
- }//eCh
- else {
- AliError(Form("Alignable entry /HMPID/Chamber%i is not valid!",iCh));
- }
- }//iCh loop
+ modUID = AliGeomManager::LayerToVolUID(idHMPID,modnum++);
+ if(!gGeoManager->SetAlignableEntry(Form("/HMPID/Chamber%i",iCh),Form("ALIC_1/Hmp%i_0",iCh),modUID))
+ AliError("AliHMPIDv3::Unable to set alignable entry!!"); //aligment without AliCluster3D
+ //Get Tracking To Local matricies for alignment with AliCluster3D
+ TGeoPNEntry *eCh = gGeoManager->GetAlignableEntryByUID(modUID);
+ TGeoHMatrix *globMatrix = eCh->GetGlobalOrig();
+
+ //Double_t phi = 20.0 * ((iCh+1) / 3) + 10.0;
+ Double_t phi = ph[iCh];
+ TGeoHMatrix *t2l = new TGeoHMatrix();
+ t2l->RotateZ(phi);
+ t2l->MultiplyLeft(&(globMatrix->Inverse()));
+ eCh->SetMatrix(t2l);
+ }//iCh loop
+
}
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
void AliHMPIDv3::CreateMaterials()
TGeoVolume *proxgap1 = gGeoManager->MakeBox("Hproxgap1",ch4,1407*mm/2 , 1366.00*mm/2 ,(9.-7.5)*mm/2.);//methane volume between quartz and fr4
- TGeoVolume *proxgap2 = gGeoManager->MakeBox("Hproxgap2",ch4,1407*mm/2 , 1366.00*mm/2 ,(81.7-6.2-9.-7.5)*mm/2.);//methane volume between fr4 and Hgap
-
+ TGeoVolume *proxgap2 = gGeoManager->MakeBox("Hproxgap2",ch4,1407*mm/2 , 1366.00*mm/2 ,(81.7-6.2-34.-9.-7.5)*mm/2.);//methane volume between fr4 and Hgap(tot height(81.7) - Hsec (6.2) - proxygap2 (34) - upper bound of fr4 (9+7.5))
+
// ^ Y z= z=-12mm z=98.25mm ALIC->7xHmp (virtual)-->1xHsbo (virtual) --->2xHcov (real) 2072P1
// | ____________________________________ | |-->1xHhon (real) 2072P1
fr1->AddNode(fr1perUpBig,1,new TGeoTranslation(0.,-(1385-37-35)*mm/2.,(58.3*mm-20.00*2*mm-10.0*mm)/2.));
fr1->AddNode(fr1perUpSma,1,new TGeoTranslation(-(1426-37-35)*mm/2.,0.,(58.3*mm-20.00*2*mm-10.0*mm)/2.));
- fr1->AddNode(fr1perDowBig,0,new TGeoTranslation(0.,(1385-37-46)*mm/2.,(-58.3*mm+2.3*mm)/2.));
- fr1->AddNode(fr1perDowSma,0,new TGeoTranslation((1426-37-46)*mm/2.,0.,(-58.3*mm+2.3*mm)/2.));
- fr1->AddNode(fr1perDowBig,1,new TGeoTranslation(0.,-(1385-37-46)*mm/2.,(-58.3*mm+2.3*mm)/2.));
- fr1->AddNode(fr1perDowSma,1,new TGeoTranslation(-(1426-37-46)*mm/2.,0.,(-58.3*mm+2.3*mm)/2.));
-
+ fr1->AddNode(fr1perDowBig,0,new TGeoTranslation(0.,(1385-37)*mm/2.,(-58.3*mm+2.3*mm)/2.));
+ fr1->AddNode(fr1perDowSma,0,new TGeoTranslation((1426-37)*mm/2.,0.,(-58.3*mm+2.3*mm)/2.));
+ fr1->AddNode(fr1perDowBig,1,new TGeoTranslation(0.,-(1385-37)*mm/2.,(-58.3*mm+2.3*mm)/2.));
+ fr1->AddNode(fr1perDowSma,1,new TGeoTranslation(-(1426-37)*mm/2.,0.,(-58.3*mm+2.3*mm)/2.));
fr1->AddNode(ppf,4,new TGeoTranslation(-335*mm,433*mm,(-58.3+38.3)*mm/2.)); fr1->AddNode(ppf,5,new TGeoTranslation(335*mm,433*mm,(-58.3+38.3)*mm/2.));
fr1->AddNode(ppf,2,new TGeoTranslation(-335*mm,0.,(-58.3+38.3)*mm/2.)); fr1->AddNode(ppf,3,new TGeoTranslation(335*mm,0.,(-58.3+38.3)*mm/2.));
TGeoVolume *busext = gGeoManager->MakeTubs("Hbusext",csi,29*mm,30*mm,40*mm/2.,0.,180); //in Hext
TGeoVolume *ext = new TGeoVolumeAssembly("Hext");
+ rect->AddNode(gassipl2,1,new TGeoTranslation(0.,0.,0));
+
for(Int_t hor=0; hor< 10; hor++){
for(Int_t vert=0; vert < 8; vert++){
cufoil->AddNode(rect,hor+vert*10,new TGeoTranslation(offsetx+ 48.*mm/2 + hor*interdistx-662.*mm/2,offsety + 19.*mm/2 + vert*interdisty-425.*mm/2.,0.));
- cufoil->AddNode(gassipl2,hor+vert*10,new TGeoTranslation(offsetx+ 48.*mm/2 + hor*interdistx-662.*mm/2,offsety + 19.*mm/2 + vert*interdisty-425.*mm/2.,0.));
fr1upcard->AddNode(gassipl3,hor+vert*10,new TGeoTranslation(offsetx+ 48.*mm/2 + hor*interdistx-662.*mm/2,offsety + 19.*mm/2 + vert*interdisty-425.*mm/2.,0.));
ext->AddNode(gassipl4,hor+vert*10,new TGeoTranslation(offsetx+ 48.*mm/2 + hor*interdistx-662.*mm/2,offsety + 19.*mm/2 +
vert*interdisty-425.*mm/2.,0));
hmp->AddNode(proxgap1,0,new TGeoTranslation(0.,0.,(9.-7.5)*mm/2.));//due to the TGeoVolumeAssembly definition the ch4 volume must be inserted around the collecting wires
- hmp->AddNode(proxgap2,0,new TGeoTranslation(0.,0.,(9+7.5)*mm + (81.7-6.2-9.-7.5)*mm/2.));
+ hmp->AddNode(proxgap2,0,new TGeoTranslation(0.,0.,(9+7.5 +34)*mm + (81.7-6.2-34.-9.-7.5)*mm/2.));// tot height(81.7) - Hsec - proxygap2 - top edge fr4 at (9+7.5) mm
// ^ Y single cell 5.5mm CH4 = 1*mm CsI + 4.45*mm CsI x cath +0.05*mm safety margin
// | ______________________________
ppf->AddNode(smo,7,new TGeoTranslation(+ 65.0*mm,+151.875*mm, 0.*mm));
-hmp->AddNode(fr3,1,new TGeoTranslation(0.,0.,(80.-29.)*mm-34.*mm/2));
+//hmp->AddNode(fr3,1,new TGeoTranslation(0.,0.,(81.7-29.)*mm-34.*mm/2));
+ hmp->AddNode(fr3,1,new TGeoTranslation(0.,0.,(9.+7.5)*mm+34.*mm/2));
fr3->AddNode( fr3up,1, new TGeoTranslation(0., 0., 7*mm));
fr3->AddNode(fr3down,1,new TGeoTranslation(0., 0., -10*mm));
// Arguments: none
// Returns: none
AliDebug(1,"Start v2 HMPID.");
- fIdPad = gMC->VolId("Hpad");
- fIdCell = gMC->VolId("Hcel");
AliDebug(1,"Stop v2 HMPID.");
}
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
out[2]=0.5*(out[2]+in[2]);
TString tmpname = volname; tmpname.Remove(0,4); Int_t idch = tmpname.Atoi(); //retrieve the chamber number
Float_t xl,yl;AliHMPIDParam::Instance()->Mars2Lors(idch,out,xl,yl); //take LORS position
- new((*fHits)[fNhits++])AliHMPIDHit(idch,eloss,pid,tid,xl,yl,out); //HIT for MIP, position near anod plane, eloss will be set to Q
- if(fDoFeed) GenFee(eloss); //generate feedback photons
+ if(eloss>0) {
+ new((*fHits)[fNhits++])AliHMPIDHit(idch,eloss,pid,tid,xl,yl,out); //HIT for MIP, position near anod plane, eloss will be set to Q
+ if(fDoFeed) GenFee(eloss); //generate feedback photons
+ }
}else //just going inside
eloss += gMC->Edep(); //collect this step eloss
}//MIP in GAP
TGeoMedium *med =gGeoManager->GetMedium("HMPID_Al");
TGeoVolume *cradle=new TGeoVolumeAssembly("Hcradle");
- Double_t baselong[7]={6037*mm-2*60*mm, 6037*mm-2*60*mm,60*mm,0.,100*mm,10*mm,10*mm};//2CRE2112P3
+ //Double_t baselong[7]={6037*mm-2*60*mm, 6037*mm-2*60*mm,60*mm,0.,100*mm,10*mm,10*mm};//2CRE2112P3
+ Double_t baselong[7]={6037*mm-2*100*mm, 6037*mm-2*100*mm,60*mm,0.,100*mm,10*mm,10*mm};//2CRE2112P3
TGeoVolume *lbase = CradleBaseVolume(med,baselong,"cradleLbase");
lbase->SetLineColor(kGray);
Double_t height = 30.*mm; //30 = 2*(1488/2-729) (2CRE2112P3)
Double_t tubeheight = 50.*mm; Double_t heightred = 5.*mm; Double_t zred = 5.*mm;
Double_t oneshift = tubeheight/TMath::Tan(TMath::DegToRad()*20.)+(1458.-35)*mm/2 - (1607-35)*mm/2;
- Double_t linclined[7] = {1458.*mm-params[6],1607.*mm-params[6],tubeheight,oneshift, height ,heightred,zred}; //3.5 is for not correct measurements in 2CRE2112P3<=> 597!=inclined*sin(20)
+ Double_t linclined[7] = {1458.*mm-params[6]-0.5,1607.*mm-params[6]-0.5,tubeheight,oneshift, height ,heightred,zred}; //3.5 is for not correct measurements in 2CRE2112P3<=> 597!=inclined*sin(20)
TGeoVolume *inclin = CradleBaseVolume(med,linclined,"inclinedbar");
inclin->SetLineColor(kGray);
Double_t lhorizontal[7] = {1641.36*mm+params[7],1659.*mm+params[7],tubeheight,0, height ,heightred,zred};
horiz->SetLineColor(kGray);
//inner bars, they are named as the numbering in 2CRE2112P3
- Double_t fourshift = tubeheight/TMath::Tan(TMath::DegToRad()*55.);
- Double_t lfour[7] = {594*mm,594*mm,tubeheight,fourshift,height,heightred,zred};
+ Double_t fourshift = tubeheight/TMath::Tan(TMath::DegToRad()*55.);
+ Double_t lfour[7] = {592*mm,592*mm,tubeheight,fourshift,height,heightred,zred};
TGeoVolume *four = CradleBaseVolume(med,lfour,"bar4");
four->SetLineColor(kGray);
Double_t fiveshift = tubeheight/TMath::Tan(TMath::DegToRad()*75);
- Double_t lfive[7] = {503.7*mm,503.7*mm,tubeheight,fiveshift,height,heightred,zred};
+ Double_t lfive[7] = {500.*mm,500.*mm,tubeheight,fiveshift,height,heightred,zred};
TGeoVolume *five = CradleBaseVolume(med,lfive,"bar5");
five->SetLineColor(kGray);
- Double_t sixshift = tubeheight/TMath::Tan(TMath::DegToRad()*55)+459*mm/2-480*mm/2;
- Double_t lsix[7] = {459*mm,480*mm,tubeheight,sixshift,height,heightred,zred};
+ Double_t sixshift = tubeheight/TMath::Tan(TMath::DegToRad()*55)+459*mm/2-480*mm/2;
+ Double_t lsix[7] = {456*mm,477*mm,tubeheight,sixshift,height,heightred,zred};
TGeoVolume *six = CradleBaseVolume(med,lsix,"bar6");
six->SetLineColor(kGray);
eight->SetLineColor(kGray);
Double_t nineshift = -tubeheight/TMath::Tan(TMath::DegToRad()*71)+83.*mm/2-66.*mm/2;
- Double_t lnine[7] = {66.*mm,83.*mm,tubeheight,nineshift,height,heightred,zred};
+ Double_t lnine[7] = {59.5*mm,76.5*mm,tubeheight,nineshift,height,heightred,zred};
TGeoVolume *nine = CradleBaseVolume(med,lnine,"bar9");
nine->SetLineColor(kGray);
ten->SetLineColor(kGray);
Double_t elevenshift = (-tubeheight/TMath::Tan(TMath::DegToRad()*70) -338.*mm/2+315.*mm/2);
- Double_t leleven[7] = {315.*mm,338.*mm,tubeheight,elevenshift,height,heightred,zred};
+ Double_t leleven[7] = {308.*mm,331.*mm,tubeheight,elevenshift,height,heightred,zred};
TGeoVolume *eleven = CradleBaseVolume(med,leleven,"bar11");
eleven->SetLineColor(kGray);
Double_t twelveshift = (-tubeheight/TMath::Tan(TMath::DegToRad()*60) -538.*mm/2+508.*mm/2);
- Double_t ltwelve[7] = {508.*mm,538.*mm,tubeheight,twelveshift,height,heightred,zred};
+ Double_t ltwelve[7] = {507.*mm,537.*mm,tubeheight,twelveshift,height,heightred,zred};
TGeoVolume *twelve = CradleBaseVolume(med,ltwelve,"bar12");
twelve->SetLineColor(kGray);
- Double_t thirteenshift = tubeheight/TMath::Tan(TMath::DegToRad()*43);
- Double_t lthirteen[7] = {712.5*mm,712.5*mm,tubeheight,thirteenshift,height,heightred,zred};
+ Double_t thirteenshift = tubeheight/TMath::Tan(TMath::DegToRad()*43);
+ Double_t lthirteen[7] = {708.*mm,708.*mm,tubeheight,thirteenshift,height,heightred,zred};
TGeoVolume *thirteen = CradleBaseVolume(med,lthirteen,"bar13");
thirteen->SetLineColor(kGray);
//vertical rectangles
- TGeoVolume *vbox=gGeoManager->MakeBox ("Hvbox",med , 1488*mm/2 , 487.*mm/2 , 50.*mm/2);
+ TGeoVolume *vbox= new TGeoVolumeAssembly("Hvbox");
vbox->SetLineColor(kViolet);
Double_t width = 50.*mm;
+
+ TGeoVolume *vboxlast= new TGeoVolumeAssembly("Hvboxlast");//vertical structure on the short base
+ vboxlast->SetLineColor(kViolet);
Double_t barheight = 100.*mm;
Double_t lAfourteen[7] = {1488.*mm,1488.*mm,barheight,0,width,heightred,zred};
TGeoVolume *afourteen = CradleBaseVolume(med,lAfourteen,"bar14top");
afourteen->SetLineColor(kGray);
- Double_t lBfourteen[7] = {382.*mm,382.*mm,barheight,0,width,heightred,zred};
+ Double_t lBfourteen[7] = {387*mm,387.*mm,barheight,0,width,heightred,zred};
TGeoVolume *bfourteen = CradleBaseVolume(med,lBfourteen,"bar14vert");
bfourteen->SetLineColor(kGray);
TGeoVolume *cfourteen = CradleBaseVolume(med,lCfourteen,"bar14bot");
cfourteen->SetLineColor(kGray);
- Double_t oblshift = 50.*mm/ TMath::Tan(TMath::DegToRad()*35);
- Double_t lDfourteen[7] = {610.*mm,610.*mm,50.*mm,oblshift,width,heightred,zred};
+ Double_t oblshift = 50.*mm/ TMath::Tan(TMath::DegToRad()*35);
+ Double_t lDfourteen[7] = {603.*mm,603.*mm,50.*mm,oblshift,width,heightred,zred};
TGeoVolume *dfourteen = CradleBaseVolume(med,lDfourteen,"bar14incl");
dfourteen->SetLineColor(kGray);
+
+ Double_t lDfourteenlast[7] = {667.*mm,667.*mm,50.*mm,oblshift,width,heightred,zred};
+ TGeoVolume *dfourteenlast = CradleBaseVolume(med,lDfourteenlast,"bar14incllast");
+ dfourteenlast->SetLineColor(kGray);
+
vbox->AddNode(afourteen,1,new TGeoTranslation(0.,487.*mm/2 -100.*mm/2,0.));
TGeoRotation *vinrot = new TGeoRotation("vertbar"); vinrot->RotateZ(90);
vbox->AddNode(bfourteen,1,new TGeoCombiTrans(1488*mm/2-100.*mm/2,-100.*mm/2,0.,vinrot));
vbox->AddNode(bfourteen,2,new TGeoCombiTrans(-1488*mm/2+100.*mm/2,-100.*mm/2,0.,vinrot));
TGeoRotation *rotboxbar = new TGeoRotation("rotboxbar"); rotboxbar->RotateZ(-35);
TGeoRotation *arotboxbar = new TGeoRotation("arotboxbar"); arotboxbar->RotateZ(-35); arotboxbar->RotateY(180);
- vbox->AddNode(dfourteen,1,new TGeoCombiTrans(-1488*mm/4,-1,0.,rotboxbar));
- vbox->AddNode(dfourteen,2,new TGeoCombiTrans(+1488*mm/4,-1,0.,arotboxbar));
+ vbox->AddNode(dfourteen,1,new TGeoCombiTrans(-1488*mm/4,-1,0.4,rotboxbar));
+ vbox->AddNode(dfourteen,2,new TGeoCombiTrans(+1488*mm/4,-1,0.4,arotboxbar));
+ //vertical box on the short base of the cradle
+ vboxlast->AddNode(afourteen,1,new TGeoTranslation(0.,487.*mm/2 -100.*mm/2,0.));
+ vboxlast->AddNode(bfourteen,1,new TGeoCombiTrans(1488*mm/2-100.*mm/2,-100.*mm/2,0.,vinrot));
+ vboxlast->AddNode(bfourteen,2,new TGeoCombiTrans(-1488*mm/2+100.*mm/2,-100.*mm/2,0.,vinrot));
+ vboxlast->AddNode(dfourteenlast,1,new TGeoCombiTrans(-1488*mm/4+1.7,-3.,0.,rotboxbar));
+ vboxlast->AddNode(dfourteenlast,2,new TGeoCombiTrans(+1488*mm/4-1.7,-3.,0.,arotboxbar));
//POSITIONING IN THE VIRTUAL VOLUME "cradle"
//long base
TGeoRotation *rotl=new TGeoRotation("Clongbase"); rotl->RotateX(90);
- cradle->AddNode(lbase,1,new TGeoCombiTrans ( 0*mm, (1488-100)*mm/2, -(597-60)*mm/2,rotl));
- cradle->AddNode(lbase,2,new TGeoCombiTrans ( 0*mm, -(1488-100)*mm/2, -(597-60)*mm/2,rotl));
+ cradle->AddNode(lbase,0,new TGeoCombiTrans ( 0*mm, (1488-100)*mm/2, -(597-60)*mm/2,rotl));
+ cradle->AddNode(lbase,1,new TGeoCombiTrans ( 0*mm, -(1488-100)*mm/2, -(597-60)*mm/2,rotl));
//short base
TGeoRotation *rots=new TGeoRotation("Cshortbase"); rots->RotateX(90); rots->RotateZ(90);
cradle->AddNode(sbase,1,new TGeoCombiTrans ((6037-100)*mm/2, 0.,-(597-60)*mm/2,rots));
Double_t dx =(1607-35)*mm*TMath::Cos(TMath::DegToRad()*20)/2-tubeheight/2*TMath::Sin(TMath::DegToRad()*20)+params[5];
- cradle->AddNode(inclin,1,new TGeoCombiTrans(origintrapstructure + (2288+60)*mm -dx,729*mm,params[0],rot1));
+ cradle->AddNode(inclin,1,new TGeoCombiTrans(origintrapstructure + (2288+60)*mm -dx,729*mm,params[0]+0.4,rot1));//+0.7 added
cradle->AddNode(horiz,1,new TGeoCombiTrans( origintrapstructure,729*mm, 597*mm/2 - tubeheight/2,rot2));//correctly positioned
TGeoRotation *rot1mirror=new TGeoRotation("inclmirrot"); rot1mirror->RotateX(90); rot1mirror->RotateY(200); rot1mirror->RotateZ(180);
- cradle->AddNode(inclin,2,new TGeoCombiTrans(origintrapstructure - 2345*mm + dx,729*mm,params[0],rot1mirror));
- cradle->AddNode(inclin,3,new TGeoCombiTrans(origintrapstructure + (2288+60)*mm -dx,-729*mm,params[0],rot1));
+ cradle->AddNode(inclin,2,new TGeoCombiTrans(origintrapstructure - 2345*mm + dx,729*mm,params[0]+0.4,rot1mirror));//+0.7 added
+ cradle->AddNode(inclin,3,new TGeoCombiTrans(origintrapstructure + (2288+60)*mm -dx,-729*mm,params[0]+0.4,rot1));//0.7 added
cradle->AddNode(horiz,2,new TGeoCombiTrans( origintrapstructure,-729*mm, 597*mm/2 - tubeheight/2,rot2));//correctly positioned
- cradle->AddNode(inclin,4,new TGeoCombiTrans(origintrapstructure - 2345*mm + dx,-729*mm,params[0],rot1mirror));
+ cradle->AddNode(inclin,4,new TGeoCombiTrans(origintrapstructure - 2345*mm + dx,-729*mm,params[0]+0.4,rot1mirror));//0.7 added
//inner pieces on one side
TGeoRotation *rot4=new TGeoRotation("4rot"); rot4->RotateX(-90); rot4->RotateY(-55); rot4->RotateZ(180);
TGeoRotation *rot9a=new TGeoRotation("9arot"); rot9a->RotateX(-90); rot9a->RotateY(-90); rot9a->RotateZ(180);
cradle->AddNode(nine,1,new TGeoCombiTrans(origintrapstructure+1960*mm+2.5+3.,-729.*mm,-20.,rot9));
cradle->AddNode(nine,2,new TGeoCombiTrans(origintrapstructure-1960*mm-2.5-3.,-729.*mm,-20.,rot9a));
-
//inner pieces on the other side
TGeoRotation *rot10=new TGeoRotation("10rot"); rot10->RotateX(-90); rot10->RotateY(-120);
TGeoRotation *rot10a=new TGeoRotation("10arot"); rot10a->RotateX(-90); rot10a->RotateY(-120); rot10a->RotateZ(180);
- cradle->AddNode(ten,1,new TGeoCombiTrans(origintrapstructure+1738*mm+tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))-2,+729.*mm,-13.,rot10));
- cradle->AddNode(ten,2,new TGeoCombiTrans(origintrapstructure-1738*mm-tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))+2,+729.*mm,-13.,rot10a));
+ cradle->AddNode(ten,1,new TGeoCombiTrans(origintrapstructure+1738*mm+tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))-2,+729.*mm,-13.,rot10));
+ cradle->AddNode(ten,2,new TGeoCombiTrans(origintrapstructure-1738*mm-tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))+2,+729.*mm,-13.,rot10a));
TGeoRotation *rot11=new TGeoRotation("11rot"); rot11->RotateX(-90); rot11->RotateY(50);
TGeoRotation *rot11a=new TGeoRotation("11arot"); rot11a->RotateX(-90); rot11a->RotateY(50); rot11a->RotateZ(180);
- cradle->AddNode(eleven,1,new TGeoCombiTrans(origintrapstructure-1738*mm-tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))+352.*mm,+729.*mm,-12.5,rot11));
- cradle->AddNode(eleven,2,new TGeoCombiTrans(origintrapstructure+1738*mm+tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))-352.*mm,+729.*mm,-12.5,rot11a));
+ cradle->AddNode(eleven,1,new TGeoCombiTrans(origintrapstructure-1738*mm-tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))+352.*mm,+729.*mm,-12.7,rot11));
+ cradle->AddNode(eleven,2,new TGeoCombiTrans(origintrapstructure+1738*mm+tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))-352.*mm,+729.*mm,-12.7,rot11a));
TGeoRotation *rot12=new TGeoRotation("12rot"); rot12->RotateX(-90); rot12->RotateY(-120);
TGeoRotation *rot12a=new TGeoRotation("12arot"); rot12a->RotateX(-90); rot12a->RotateY(-120); rot12a->RotateZ(180);
//vertical structures
TGeoRotation *vrot = new TGeoRotation("vertbox"); vrot->RotateX(90); vrot->RotateZ(90);
- cradle->AddNode(vbox,1,new TGeoCombiTrans(-6037*mm/2+50.*mm/2,0.,0.5,vrot));
- cradle->AddNode(cfourteen,1,new TGeoCombiTrans(-6037*mm/2+50.*mm/2,0.,-477.*mm/2 -20.*mm/2,vrot));
+ cradle->AddNode(vboxlast,1,new TGeoCombiTrans(-6037*mm/2+50.*mm/2,0.,0.5,vrot));//vertial box on the short cradle base
cradle->AddNode(vbox,2,new TGeoCombiTrans(-6037*mm/2+50.*mm/2+990.*mm,0.,0.5,vrot));
cradle->AddNode(cfourteen,2,new TGeoCombiTrans(-6037*mm/2+50.*mm/2+990.*mm,0.,-477.*mm/2 -20.*mm/2,vrot));
xv[1] = l[0]/2 + l[3]; yv[1] = l[2]/2;
xv[2] = l[1]/2; yv[2] = -l[2]/2;
xv[3] = -l[1]/2; yv[3] = -l[2]/2;
- Double_t ang1 = 90, ang2 = 90;
- if(xv[0]-xv[3]!=0) ang1 = TMath::RadToDeg()*TMath::ATan((yv[0]-yv[3])/(xv[0]-xv[3]));
- if(xv[1]-xv[2]!=0) ang2 = TMath::RadToDeg()*TMath::ATan((yv[1]-yv[2])/(xv[1]-xv[2]));
- AliDebug(1,Form("name %s x0 - x2 = %f angoli alla base maggiore: %f %f",xtruIn->GetName(),xv[0] - xv[2],ang1,ang2));
xtruOut->DefinePolygon(4, xv, yv);
- xtruOut->DefineSection(0, -l[4]/2., 0., 0., 1.0);//0= I piano z; (0.,0.) = spostamento rispetto al centro; 1.=fattore di scala della forma
- xtruOut->DefineSection(1, +l[4]/2., 0., 0., 1.0);//1= II piano z;
+ xtruOut->DefineSection(0, -l[4]/2., 0., 0., 1.0);//0= I plane z; (0.,0.) = shift wrt centre; 1.= shape scale factor
+ xtruOut->DefineSection(1, +l[4]/2., 0., 0., 1.0);//1= II plane z;
Double_t tgalpha = 0;
if(xv[3]-xv[0] == 0 ) tgalpha = 999999;
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff