* about the suitability of this software for any purpose. It is *
* provided "as is" without express or implied warranty. *
**************************************************************************/
-#include <TH3F.h>
#include <TTree.h>
+#include "AliRunLoader.h"
#include "AliESDVertex.h"
#include "AliLog.h"
#include "AliStrLine.h"
#include "AliTracker.h"
#include "AliITSDetTypeRec.h"
#include "AliITSRecPoint.h"
+#include "AliITSRecPointContainer.h"
#include "AliITSgeomTGeo.h"
#include "AliVertexerTracks.h"
#include "AliITSVertexer3D.h"
+#include "AliITSVertexerZ.h"
+#include "AliITSSortTrkl.h"
/////////////////////////////////////////////////////////////////
// this class implements a method to determine
// the 3 coordinates of the primary vertex
-// for p-p collisions
-// It can be used successfully with Pb-Pb collisions
+// optimized for
+// p-p collisions
////////////////////////////////////////////////////////////////
+const Int_t AliITSVertexer3D::fgkMaxNumOfClDefault = 1000;
+
ClassImp(AliITSVertexer3D)
/* $Id$ */
//______________________________________________________________________
-AliITSVertexer3D::AliITSVertexer3D():AliITSVertexer(),
-fLines("AliStrLine",1000),
-fVert3D(),
-fCoarseDiffPhiCut(0.),
-fCoarseMaxRCut(0.),
-fMaxRCut(0.),
-fZCutDiamond(0.),
-fMaxZCut(0.),
-fDCAcut(0.),
-fDiffPhiMax(0.),
-fMeanPSelTrk(0.),
-fMeanPtSelTrk(0.)
+AliITSVertexer3D::AliITSVertexer3D():
+ AliITSVertexer(),
+ fLines("AliStrLine",1000),
+ fVert3D(),
+ fCoarseDiffPhiCut(0.),
+ fFineDiffPhiCut(0.),
+ fCutOnPairs(0.),
+ fCoarseMaxRCut(0.),
+ fMaxRCut(0.),
+ fMaxRCut2(0.),
+ fZCutDiamond(0.),
+ fMaxZCut(0.),
+ fDCAcut(0.),
+ fDiffPhiMax(0.),
+ fMeanPSelTrk(0.),
+ fMeanPtSelTrk(0.),
+ fUsedCluster(kMaxCluPerMod*kNSPDMod),
+ fZHisto(0),
+ fDCAforPileup(0.),
+ fDiffPhiforPileup(0.),
+ fBinSizeR(0.),
+ fBinSizeZ(0.),
+ fPileupAlgo(0),
+ fMaxNumOfCl(fgkMaxNumOfClDefault),
+ fDoDownScale(kFALSE),
+ fGenerForDownScale(0)
{
// Default constructor
SetCoarseDiffPhiCut();
+ SetFineDiffPhiCut();
+ SetCutOnPairs();
SetCoarseMaxRCut();
SetMaxRCut();
+ SetMaxRCutAlgo2();
SetZCutDiamond();
SetMaxZCut();
- SetDCAcut();
+ SetDCACut();
SetDiffPhiMax();
SetMeanPSelTracks();
SetMeanPtSelTracks();
+ SetMinDCAforPileup();
+ SetDeltaPhiforPileup();
+ SetPileupAlgo();
+ SetBinSizeR();
+ SetBinSizeZ();
+ Double_t binsize=0.02; // default 200 micron
+ Int_t nbins=static_cast<Int_t>(1+2*fZCutDiamond/binsize);
+ fZHisto=new TH1F("hz","",nbins,-fZCutDiamond,-fZCutDiamond+binsize*nbins);
+ fGenerForDownScale=new TRandom3(987654321);
}
//______________________________________________________________________
AliITSVertexer3D::~AliITSVertexer3D() {
// Destructor
fLines.Clear("C");
+ if(fZHisto) delete fZHisto;
+ if(fGenerForDownScale) delete fGenerForDownScale;
}
//______________________________________________________________________
void AliITSVertexer3D::ResetVert3D(){
//
+ ResetVertex();
fVert3D.SetXv(0.);
fVert3D.SetYv(0.);
fVert3D.SetZv(0.);
fVert3D.SetDispersion(0.);
fVert3D.SetNContributors(0);
+ fUsedCluster.ResetAllBits(0);
}
//______________________________________________________________________
AliESDVertex* AliITSVertexer3D::FindVertexForCurrentEvent(TTree *itsClusterTree){
// Defines the AliESDVertex for the current event
ResetVert3D();
AliDebug(1,"FindVertexForCurrentEvent - 3D - PROCESSING NEXT EVENT");
- fLines.Clear();
+ fLines.Clear("C");
+ fCurrentVertex = NULL;
Int_t nolines = FindTracklets(itsClusterTree,0);
- fCurrentVertex = 0;
- if(nolines<2)return fCurrentVertex;
- Int_t rc=Prepare3DVertex(0);
- if(rc==0) fVert3D=AliVertexerTracks::TrackletVertexFinder(&fLines,0);
- /* uncomment to debug
- printf("Vertex found in first iteration:\n");
- fVert3D.Print();
- printf("Start second iteration\n");
- end of debug lines */
- if(fVert3D.GetNContributors()>0){
- fLines.Clear("C");
- nolines = FindTracklets(itsClusterTree,1);
- if(nolines>=2){
- rc=Prepare3DVertex(1);
- if(rc==0) fVert3D=AliVertexerTracks::TrackletVertexFinder(&fLines,0);
+ Int_t rc;
+ if(nolines>=2){
+ rc=Prepare3DVertex(0);
+ if(fVert3D.GetNContributors()>0){
+ fLines.Clear("C");
+ nolines = FindTracklets(itsClusterTree,1);
+ if(nolines>=2){
+ rc=Prepare3DVertex(1);
+ if(fPileupAlgo == 2 && rc == 0) FindVertex3DIterative();
+ else if(fPileupAlgo!=2 && rc == 0) FindVertex3D(itsClusterTree);
+ if(rc!=0) fVert3D.SetNContributors(0); // exclude this vertex
+ }
}
}
- /* uncomment to debug
- printf("Vertex found in second iteration:\n");
- fVert3D.Print();
- end of debug lines */
+
+ if(!fCurrentVertex){
+ AliITSVertexerZ vertz(GetNominalPos()[0],GetNominalPos()[1]);
+ vertz.SetDetTypeRec(GetDetTypeRec());
+ AliDebug(1,"Call Vertexer Z\n");
+ vertz.SetLowLimit(-fZCutDiamond);
+ vertz.SetHighLimit(fZCutDiamond);
+ AliESDVertex* vtxz = vertz.FindVertexForCurrentEvent(itsClusterTree);
+ if(vtxz){
+ Double_t position[3]={GetNominalPos()[0],GetNominalPos()[1],vtxz->GetZv()};
+ Double_t covmatrix[6];
+ vtxz->GetCovMatrix(covmatrix);
+ Double_t chi2=99999.;
+ Int_t nContr=vtxz->GetNContributors();
+ fCurrentVertex = new AliESDVertex(position,covmatrix,chi2,nContr);
+ fCurrentVertex->SetDispersion(vtxz->GetDispersion());
+ fCurrentVertex->SetTitle("vertexer: Z");
+ fCurrentVertex->SetName("SPDVertexZ");
+ delete vtxz;
+ }
+
+ }
+ if(fComputeMultiplicity) FindMultiplicity(itsClusterTree);
+ return fCurrentVertex;
+}
+
+//______________________________________________________________________
+void AliITSVertexer3D::FindVertex3D(TTree *itsClusterTree){
- Float_t vRadius=TMath::Sqrt(fVert3D.GetXv()*fVert3D.GetXv()+fVert3D.GetYv()*fVert3D.GetYv());
+ Double_t vRadius=TMath::Sqrt(fVert3D.GetXv()*fVert3D.GetXv()+fVert3D.GetYv()*fVert3D.GetYv());
if(vRadius<GetPipeRadius() && fVert3D.GetNContributors()>0){
Double_t position[3]={fVert3D.GetXv(),fVert3D.GetYv(),fVert3D.GetZv()};
Double_t covmatrix[6];
Int_t nContr=fVert3D.GetNContributors();
fCurrentVertex = new AliESDVertex(position,covmatrix,chi2,nContr);
fCurrentVertex->SetTitle("vertexer: 3D");
- fCurrentVertex->SetName("Vertex");
+ fCurrentVertex->SetName("SPDVertex3D");
fCurrentVertex->SetDispersion(fVert3D.GetDispersion());
+ fNoVertices=1;
+
+ switch(fPileupAlgo){
+ case 0: PileupFromZ(); break;
+ case 1: FindOther3DVertices(itsClusterTree); break;
+ case 3: break; // no pileup algo
+ default: AliError("Wrong pileup algorithm"); break;
+ }
+ if(fNoVertices==1){
+ fVertArray = new AliESDVertex[1];
+ fVertArray[0]=(*fCurrentVertex);
+ }
}
- FindMultiplicity(itsClusterTree);
- return fCurrentVertex;
+}
+
+//______________________________________________________________________
+void AliITSVertexer3D::FindVertex3DIterative(){
+ //
+
+ Int_t nLines=fLines.GetEntriesFast();
+ Int_t maxPoints=nLines*(nLines-1)/2;
+ Double_t* xP=new Double_t[maxPoints];
+ Double_t* yP=new Double_t[maxPoints];
+ Double_t* zP=new Double_t[maxPoints];
+ Int_t* index1=new Int_t[maxPoints];
+ Int_t* index2=new Int_t[maxPoints];
+ Double_t xbeam=fVert3D.GetXv();
+ Double_t ybeam=fVert3D.GetYv();
+
+ Int_t iPoint=0;
+ for(Int_t ilin1=0; ilin1<nLines; ilin1++){
+ AliStrLine *l1 = (AliStrLine*)fLines.At(ilin1);
+ for(Int_t ilin2=ilin1+1; ilin2<nLines; ilin2++){
+ AliStrLine *l2 = (AliStrLine*)fLines.At(ilin2);
+ Double_t dca=l1->GetDCA(l2);
+ if(dca > fDCAcut || dca<0.00001) continue;
+ Double_t point[3];
+ Int_t retc = l1->Cross(l2,point);
+ if(retc<0)continue;
+ Double_t rad=TMath::Sqrt(point[0]*point[0]+point[1]*point[1]);
+ if(rad>fCoarseMaxRCut)continue;
+ Double_t distFromBeam=TMath::Sqrt((point[0]-xbeam)*(point[0]-xbeam)+(point[1]-ybeam)*(point[1]-ybeam));
+ if(distFromBeam>fMaxRCut2) continue;
+ xP[iPoint]=point[0];
+ yP[iPoint]=point[1];
+ zP[iPoint]=point[2];
+ index1[iPoint]=ilin1;
+ index2[iPoint]=ilin2;
+ iPoint++;
+ }
+ }
+ Int_t npoints=iPoint++;
+ Int_t index=0;
+ Short_t* mask=new Short_t[npoints];
+ for(Int_t ip=0;ip<npoints;ip++) mask[ip]=-1;
+
+ for(Int_t ip1=0;ip1<npoints;ip1++){
+ if(mask[ip1]==-1) mask[ip1]=index++;
+ for(Int_t ip2=ip1+1; ip2<npoints; ip2++){
+ if(mask[ip2]==mask[ip1] && mask[ip2]!=-1) continue;
+ Double_t dist2=(xP[ip1]-xP[ip2])*(xP[ip1]-xP[ip2]);
+ dist2+=(yP[ip1]-yP[ip2])*(yP[ip1]-yP[ip2]);
+ dist2+=(zP[ip1]-zP[ip2])*(zP[ip1]-zP[ip2]);
+ if(dist2<fCutOnPairs*fCutOnPairs){
+ if(mask[ip2]==-1) mask[ip2]=mask[ip1];
+ else{
+ for(Int_t ip=0; ip<npoints;ip++){
+ if(mask[ip]==mask[ip2]) mask[ip]=mask[ip1];
+ }
+ }
+ }
+ }
+ }
+
+
+ // Count multiplicity of trackelts in clusters
+ UInt_t* isIndUsed=new UInt_t[index+1];
+ for(Int_t ind=0;ind<index+1;ind++) isIndUsed[ind]=0;
+ for(Int_t ip=0; ip<npoints;ip++){
+ Int_t ind=mask[ip];
+ isIndUsed[ind]++;
+ }
+
+ // Count clusters/vertices and sort according to multiplicity
+ Int_t nClusters=0;
+ Int_t* sortedIndex=new Int_t[index+1];
+ for(Int_t ind1=0;ind1<index+1;ind1++){
+ if(isIndUsed[ind1]<=1) isIndUsed[ind1]=0;
+ else nClusters++;
+ UInt_t cap=9999999;
+ if(ind1>0) cap=isIndUsed[sortedIndex[ind1-1]];
+ UInt_t bigger=0;
+ Int_t biggerindex=-1;
+ for(Int_t ind2=0;ind2<index+1;ind2++){
+ Bool_t use=kTRUE;
+ for(Int_t ind3=0; ind3<ind1; ind3++)
+ if(ind2==sortedIndex[ind3]) use=kFALSE;
+ if(use && isIndUsed[ind2]>bigger && isIndUsed[ind2]<=cap){
+ bigger=isIndUsed[ind2];
+ biggerindex=ind2;
+ }
+ }
+ sortedIndex[ind1]=biggerindex;
+ }
+ AliDebug(3,Form("Number of clusters before merging = %d\n",nClusters));
+
+ // Assign lines to clusters/vertices and merge clusters which share 1 line
+ Int_t nClustersAfterMerge=nClusters;
+ Int_t* belongsTo=new Int_t[nLines];
+ for(Int_t ilin=0; ilin<nLines; ilin++) belongsTo[ilin]=-1;
+ for(Int_t iclu=0;iclu<nClusters;iclu++){
+ Int_t actualCluIndex=iclu;
+ for(Int_t ip=0; ip<npoints;ip++){
+ if(mask[ip]==sortedIndex[iclu]){
+ Int_t ind1=index1[ip];
+ if(belongsTo[ind1]==-1) belongsTo[ind1]=actualCluIndex;
+ else if(belongsTo[ind1]<actualCluIndex){
+ Int_t newCluIndex=belongsTo[ind1];
+ for(Int_t ilin=0; ilin<nLines; ilin++){
+ if(belongsTo[ilin]==actualCluIndex) belongsTo[ilin]=newCluIndex;
+ }
+ AliDebug(10,Form("Merged cluster %d with %d\n",actualCluIndex,newCluIndex));
+ actualCluIndex=newCluIndex;
+ nClustersAfterMerge--;
+ }
+ Int_t ind2=index2[ip];
+ if(belongsTo[ind2]==-1) belongsTo[ind2]=actualCluIndex;
+ else if(belongsTo[ind2]<actualCluIndex){
+ Int_t newCluIndex=belongsTo[ind2];
+ for(Int_t ilin=0; ilin<nLines; ilin++){
+ if(belongsTo[ilin]==actualCluIndex) belongsTo[ilin]=newCluIndex;
+ }
+ AliDebug(10,Form("Merged cluster %d with %d\n",actualCluIndex,newCluIndex));
+ actualCluIndex=newCluIndex;
+ nClustersAfterMerge--;
+ }
+ }
+ }
+ }
+ AliDebug(3,Form("Number of clusters after merging = %d\n",nClustersAfterMerge));
+
+ // Count lines associated to each cluster/vertex
+ UInt_t *cluSize=new UInt_t[nClusters];
+ for(Int_t iclu=0;iclu<nClusters;iclu++){
+ cluSize[iclu]=0;
+ for(Int_t ilin=0; ilin<nLines; ilin++){
+ if(belongsTo[ilin]==iclu) cluSize[iclu]++;
+ }
+ }
+
+ // Count good vertices (>1 associated tracklet)
+ UInt_t nGoodVert=0;
+ for(Int_t iclu=0;iclu<nClusters;iclu++){
+ AliDebug(3,Form("Vertex %d Size=%d\n",iclu,cluSize[iclu]));
+ if(cluSize[iclu]>1) nGoodVert++;
+ }
+
+ AliDebug(1,Form("Number of good vertices = %d\n",nGoodVert));
+ // Calculate vertex coordinates for each cluster
+ if(nGoodVert>0){
+ fVertArray = new AliESDVertex[nGoodVert];
+ Int_t iVert=0;
+ for(Int_t iclu=0;iclu<nClusters;iclu++){
+ Int_t size=cluSize[iclu];
+ if(size>1){
+ AliStrLine **arrlin = new AliStrLine*[size];
+ Int_t nFilled=0;
+ for(Int_t ilin=0; ilin<nLines; ilin++){
+ if(belongsTo[ilin]==iclu){
+ arrlin[nFilled++] = dynamic_cast<AliStrLine*>(fLines[ilin]);
+ }
+ }
+ AliDebug(3,Form("Vertex %d N associated tracklets = %d out of %d\n",iVert,size,nFilled));
+
+ fVertArray[iVert]=AliVertexerTracks::TrackletVertexFinder(arrlin,nFilled);
+ Double_t peak[3];
+ fVertArray[iVert].GetXYZ(peak);
+ AliStrLine **arrlin2 = new AliStrLine*[size];
+ Int_t nFilled2=0;
+ for(Int_t i=0; i<nFilled;i++){
+ AliStrLine *l1 = arrlin[i];
+ if(l1->GetDistFromPoint(peak)< fDCAcut)
+ arrlin2[nFilled2++] = dynamic_cast<AliStrLine*>(l1);
+ }
+ if(nFilled2>1){
+ AliDebug(3,Form("Vertex %d recalculated with %d tracklets\n",iVert,nFilled2));
+ fVertArray[iVert]=AliVertexerTracks::TrackletVertexFinder(arrlin2,nFilled2);
+ }
+ delete [] arrlin;
+ delete [] arrlin2;
+ ++iVert;
+ }
+ }
+
+ if(nGoodVert > 1){
+ fIsPileup = kTRUE;
+ fNTrpuv = fVertArray[1].GetNContributors();
+ fZpuv = fVertArray[1].GetZv();
+ }
+
+ Double_t vRadius=TMath::Sqrt(fVertArray[0].GetXv()*fVertArray[0].GetXv()+fVertArray[0].GetYv()*fVertArray[0].GetYv());
+ if(vRadius<GetPipeRadius() && fVertArray[0].GetNContributors()>0){
+ Double_t position[3]={fVertArray[0].GetXv(),fVertArray[0].GetYv(),fVertArray[0].GetZv()};
+ Double_t covmatrix[6];
+ fVertArray[0].GetCovMatrix(covmatrix);
+ Double_t chi2=99999.;
+ Int_t nContr=fVertArray[0].GetNContributors();
+ fCurrentVertex = new AliESDVertex(position,covmatrix,chi2,nContr);
+ fCurrentVertex->SetTitle("vertexer: 3D");
+ fCurrentVertex->SetName("SPDVertex3D");
+ fCurrentVertex->SetDispersion(fVertArray[0].GetDispersion());
+ }
+ }
+
+ delete [] index1;
+ delete [] index2;
+ delete [] mask;
+ delete [] isIndUsed;
+ delete [] sortedIndex;
+ delete [] belongsTo;
+ delete [] cluSize;
+ delete [] xP;
+ delete [] yP;
+ delete [] zP;
+}
+//______________________________________________________________________
+void AliITSVertexer3D::FindVertex3DIterativeMM(){
+ // Defines the AliESDVertex for the current event
+ Int_t numsor=fLines.GetEntriesFast()*(fLines.GetEntriesFast()-1)/2;
+ //cout<<"AliITSVertexer3D::FindVertexForCurentEvent: Number of tracklets selected for vertexing "<<fLines.GetEntriesFast()<<"; Number of pairs: "<<numsor<<endl;
+ AliITSSortTrkl srt(fLines,numsor,fCutOnPairs,fCoarseMaxRCut);
+ srt.FindClusters();
+ AliInfo(Form("Number of vertices: %d",srt.GetNumberOfClusters()));
+
+ fNoVertices = srt.GetNumberOfClusters();
+ //printf("fNoVertices = %d \n",fNoVertices);
+ if(fNoVertices>0){
+ fVertArray = new AliESDVertex[fNoVertices];
+ for(Int_t kk=0; kk<srt.GetNumberOfClusters(); kk++){
+ Int_t size = 0;
+ Int_t *labels = srt.GetTrackletsLab(kk,size);
+ /*
+ Int_t *pairs = srt.GetClusters(kk);
+ Int_t nopai = srt.GetSizeOfCluster(kk);
+ cout<<"***** Vertex number "<<kk<<". Pairs: \n";
+ for(Int_t jj=0;jj<nopai;jj++){
+ cout<<pairs[jj]<<" - ";
+ if(jj>0 & jj%8==0)cout<<endl;
+ }
+ cout<<endl;
+ cout<<"***** Vertex number "<<kk<<". Labels: \n";
+ */
+ AliStrLine **tclo = new AliStrLine* [size];
+ for(Int_t jj=0;jj<size;jj++){
+ // cout<<labels[jj]<<" - ";
+ // if(jj>0 & jj%8==0)cout<<endl;
+ tclo[jj] = dynamic_cast<AliStrLine*>(fLines[labels[jj]]);
+ }
+ // cout<<endl;
+ delete []labels;
+ fVertArray[kk]=AliVertexerTracks::TrackletVertexFinder(tclo,size);
+ delete [] tclo;
+ // fVertArray[kk].PrintStatus();
+ if(kk == 1){
+ // at least one second vertex is present
+ fIsPileup = kTRUE;
+ fNTrpuv = fVertArray[kk].GetNContributors();
+ fZpuv = fVertArray[kk].GetZv();
+ }
+ }
+ Double_t vRadius=TMath::Sqrt(fVertArray[0].GetXv()*fVertArray[0].GetXv()+fVertArray[0].GetYv()*fVertArray[0].GetYv());
+ if(vRadius<GetPipeRadius() && fVertArray[0].GetNContributors()>0){
+ Double_t position[3]={fVertArray[0].GetXv(),fVertArray[0].GetYv(),fVertArray[0].GetZv()};
+ Double_t covmatrix[6];
+ fVertArray[0].GetCovMatrix(covmatrix);
+ Double_t chi2=99999.;
+ Int_t nContr=fVertArray[0].GetNContributors();
+ fCurrentVertex = new AliESDVertex(position,covmatrix,chi2,nContr);
+ fCurrentVertex->SetTitle("vertexer: 3D");
+ fCurrentVertex->SetName("SPDVertex3D");
+ fCurrentVertex->SetDispersion(fVertArray[0].GetDispersion());
+ }
+ }
+
}
+//______________________________________________________________________
+Bool_t AliITSVertexer3D::DistBetweenVertices(AliESDVertex &a, AliESDVertex &b, Double_t test, Double_t &dist){
+ // method to compare the distance between vertices a and b with "test"
+ //it returns kTRUE is the distance is less or equal to test
+ dist = (a.GetX()-b.GetX()) * (a.GetX()-b.GetX());
+ dist += (a.GetY()-b.GetY()) * (a.GetY()-b.GetY());
+ dist += (a.GetZ()-b.GetZ()) * (a.GetZ()-b.GetZ());
+ dist = TMath::Sqrt(dist);
+ if(dist <= test)return kTRUE;
+ return kFALSE;
+}
+
+
//______________________________________________________________________
Int_t AliITSVertexer3D::FindTracklets(TTree *itsClusterTree, Int_t optCuts){
// All the possible combinations between recpoints on layer 1and 2 are
// considered. Straight lines (=tracklets)are formed.
// The tracklets are processed in Prepare3DVertex
- AliITSDetTypeRec detTypeRec;
- TTree *tR = itsClusterTree;
- detTypeRec.SetTreeAddressR(tR);
TClonesArray *itsRec = 0;
- // lc1 and gc1 are local and global coordinates for layer 1
- // Float_t lc1[3]={0.,0.,0.};
- Float_t gc1[3]={0.,0.,0.};
- // lc2 and gc2 are local and global coordinates for layer 2
- // Float_t lc2[3]={0.,0.,0.};
- Float_t gc2[3]={0.,0.,0.};
-
- itsRec = detTypeRec.RecPoints();
- TBranch *branch;
- branch = tR->GetBranch("ITSRecPoints");
+ if(optCuts==0) fZHisto->Reset();
+ // gc1 are local and global coordinates for layer 1
+ Float_t gc1f[3]={0.,0.,0.};
+ Double_t gc1[3]={0.,0.,0.};
+ // gc2 are local and global coordinates for layer 2
+ Float_t gc2f[3]={0.,0.,0.};
+ Double_t gc2[3]={0.,0.,0.};
+ AliITSRecPointContainer* rpcont=AliITSRecPointContainer::Instance();
+ rpcont->FetchClusters(0,itsClusterTree);
+ if(!rpcont->IsSPDActive()){
+ AliWarning("No SPD rec points found, 3D vertex not calculated");
+ return -1;
+ }
// Set values for cuts
- Float_t xbeam=0., ybeam=0.;
- Float_t zvert=0.;
- Float_t deltaPhi=fCoarseDiffPhiCut;
- Float_t deltaR=fCoarseMaxRCut;
- Float_t dZmax=fZCutDiamond;
- if(optCuts){
+ Double_t xbeam=GetNominalPos()[0];
+ Double_t ybeam=GetNominalPos()[1];
+ Double_t zvert=0.;
+ Double_t deltaPhi=fCoarseDiffPhiCut;
+ Double_t deltaR=fCoarseMaxRCut;
+ Double_t dZmax=fZCutDiamond;
+ if(optCuts==1){
xbeam=fVert3D.GetXv();
ybeam=fVert3D.GetYv();
zvert=fVert3D.GetZv();
deltaPhi = fDiffPhiMax;
deltaR=fMaxRCut;
dZmax=fMaxZCut;
+ if(fPileupAlgo == 2){
+ dZmax=fZCutDiamond;
+ deltaR=fMaxRCut2;
+ }
+ } else if(optCuts==2){
+ xbeam=fVert3D.GetXv();
+ ybeam=fVert3D.GetYv();
+ deltaPhi = fDiffPhiforPileup;
+ deltaR=fMaxRCut;
}
+
Int_t nrpL1 = 0; // number of rec points on layer 1
Int_t nrpL2 = 0; // number of rec points on layer 2
-
- // By default irstL1=0 and lastL1=79
- Int_t firstL1 = AliITSgeomTGeo::GetModuleIndex(1,1,1);
- Int_t lastL1 = AliITSgeomTGeo::GetModuleIndex(2,1,1)-1;
- for(Int_t module= firstL1; module<=lastL1;module++){ // count number of recopints on layer 1
- branch->GetEvent(module);
- nrpL1+= itsRec->GetEntries();
- detTypeRec.ResetRecPoints();
- }
- //By default firstL2=80 and lastL2=239
- Int_t firstL2 = AliITSgeomTGeo::GetModuleIndex(2,1,1);
- Int_t lastL2 = AliITSgeomTGeo::GetModuleIndex(3,1,1)-1;
- for(Int_t module= firstL2; module<=lastL2;module++){ // count number of recopints on layer 2
- branch->GetEvent(module);
- nrpL2+= itsRec->GetEntries();
- detTypeRec.ResetRecPoints();
- }
+ nrpL1=rpcont->GetNClustersInLayerFast(1);
+ nrpL2=rpcont->GetNClustersInLayerFast(2);
if(nrpL1 == 0 || nrpL2 == 0){
+ AliDebug(1,Form("No RecPoints in at least one SPD layer (%d %d)",nrpL1,nrpL2));
return -1;
}
AliDebug(1,Form("RecPoints on Layer 1,2 = %d, %d\n",nrpL1,nrpL2));
+ fDoDownScale=kFALSE;
+ Float_t factDownScal=1.;
+ Int_t origLaddersOnLayer2=fLadOnLay2;
+
+ if(nrpL1>fMaxNumOfCl || nrpL2>fMaxNumOfCl){
+ SetLaddersOnLayer2(2);
+ fDoDownScale=kTRUE;
+ factDownScal=(Float_t)fMaxNumOfCl*(Float_t)fMaxNumOfCl/(Float_t)nrpL1/(Float_t)nrpL2;
+ if(optCuts==1){
+ factDownScal*=(fCoarseDiffPhiCut/fDiffPhiMax)*10;
+ if(factDownScal>1.){
+ fDoDownScale=kFALSE;
+ SetLaddersOnLayer2(origLaddersOnLayer2);
+ }
+ }
+ else if(optCuts==2) return -1;
+ if(fDoDownScale)AliDebug(1,Form("Too many recpoints on SPD(%d %d ), downscale by %f",nrpL1,nrpL2,factDownScal));
+ }
Double_t a[3]={xbeam,ybeam,0.};
Double_t b[3]={xbeam,ybeam,10.};
AliStrLine zeta(a,b,kTRUE);
- Float_t bField=AliTracker::GetBz()/10.; //T
+ static Double_t bField=TMath::Abs(AliTracker::GetBz()/10.); //T
SetMeanPPtSelTracks(bField);
Int_t nolines = 0;
// Loop on modules of layer 1
+ Int_t firstL1 = TMath::Max(0,AliITSgeomTGeo::GetModuleIndex(1,1,1));
+ Int_t lastL1 = AliITSgeomTGeo::GetModuleIndex(2,1,1)-1;
for(Int_t modul1= firstL1; modul1<=lastL1;modul1++){ // Loop on modules of layer 1
- UShort_t ladder=int(modul1/4)+1; // ladders are numbered starting from 1
- branch->GetEvent(modul1);
- Int_t nrecp1 = itsRec->GetEntries();
- static TClonesArray prpl1("AliITSRecPoint",nrecp1);
- prpl1.SetOwner();
- for(Int_t j=0;j<nrecp1;j++){
- AliITSRecPoint *recp = (AliITSRecPoint*)itsRec->At(j);
- new(prpl1[j])AliITSRecPoint(*recp);
- }
- detTypeRec.ResetRecPoints();
+ if(!fUseModule[modul1]) continue;
+
+ UShort_t ladder=modul1/4+1; // ladders are numbered starting from 1
+ TClonesArray *prpl1=rpcont->UncheckedGetClusters(modul1);
+ Int_t nrecp1 = prpl1->GetEntries();
for(Int_t j=0;j<nrecp1;j++){
- AliITSRecPoint *recp1 = (AliITSRecPoint*)prpl1.At(j);
- // Local coordinates of this recpoint
- /*
- lc[0]=recp1->GetDetLocalX();
- lc[2]=recp1->GetDetLocalZ();
- */
- recp1->GetGlobalXYZ(gc1);
+ if(j>kMaxCluPerMod) continue;
+ UShort_t idClu1=modul1*kMaxCluPerMod+j;
+ if(fUsedCluster.TestBitNumber(idClu1)) continue;
+ if(fDoDownScale && fGenerForDownScale->Rndm()>factDownScal) continue;
+ AliITSRecPoint *recp1 = (AliITSRecPoint*)prpl1->At(j);
+ recp1->GetGlobalXYZ(gc1f);
+ for(Int_t ico=0;ico<3;ico++)gc1[ico]=gc1f[ico];
+
Double_t phi1 = TMath::ATan2(gc1[1]-ybeam,gc1[0]-xbeam);
if(phi1<0)phi1=2*TMath::Pi()+phi1;
for(Int_t ladl2=0 ; ladl2<fLadOnLay2*2+1;ladl2++){
Int_t ladmod=fLadders[ladder-1]+ladl2;
if(ladmod>AliITSgeomTGeo::GetNLadders(2)) ladmod=ladmod-AliITSgeomTGeo::GetNLadders(2);
Int_t modul2=AliITSgeomTGeo::GetModuleIndex(2,ladmod,k+1);
- branch->GetEvent(modul2);
+ if(modul2<0)continue;
+ if(!fUseModule[modul2]) continue;
+ itsRec=rpcont->UncheckedGetClusters(modul2);
Int_t nrecp2 = itsRec->GetEntries();
for(Int_t j2=0;j2<nrecp2;j2++){
+ if(j2>kMaxCluPerMod) continue;
+ UShort_t idClu2=modul2*kMaxCluPerMod+j2;
+ if(fUsedCluster.TestBitNumber(idClu2)) continue;
+
AliITSRecPoint *recp2 = (AliITSRecPoint*)itsRec->At(j2);
- /*
- lc2[0]=recp2->GetDetLocalX();
- lc2[2]=recp2->GetDetLocalZ();
- */
- recp2->GetGlobalXYZ(gc2);
+ recp2->GetGlobalXYZ(gc2f);
+ for(Int_t ico=0;ico<3;ico++)gc2[ico]=gc2f[ico];
Double_t phi2 = TMath::ATan2(gc2[1]-ybeam,gc2[0]-xbeam);
if(phi2<0)phi2=2*TMath::Pi()+phi2;
Double_t diff = TMath::Abs(phi2-phi1);
if(diff>TMath::Pi())diff=2.*TMath::Pi()-diff;
+ if(optCuts==0 && diff<fDiffPhiforPileup){
+ Double_t r1=TMath::Sqrt(gc1[0]*gc1[0]+gc1[1]*gc1[1]);
+ Double_t zc1=gc1[2];
+ Double_t r2=TMath::Sqrt(gc2[0]*gc2[0]+gc2[1]*gc2[1]);
+ Double_t zc2=gc2[2];
+ Double_t zr0=(r2*zc1-r1*zc2)/(r2-r1); //Z @ null radius
+ fZHisto->Fill(zr0);
+ }
if(diff>deltaPhi)continue;
AliStrLine line(gc1,gc2,kTRUE);
Double_t cp[3];
Double_t deltaZ=cp[2]-zvert;
if(TMath::Abs(deltaZ)>dZmax)continue;
+
if(nolines == 0){
if(fLines.GetEntriesFast()>0)fLines.Clear("C");
}
Float_t cov[6];
recp2->GetGlobalCov(cov);
-
- Float_t rad1=TMath::Sqrt(gc1[0]*gc1[0]+gc1[1]*gc1[1]);
- Float_t rad2=TMath::Sqrt(gc2[0]*gc2[0]+gc2[1]*gc2[1]);
- Float_t factor=(rad1+rad2)/(rad2-rad1); //factor to account for error on tracklet direction
- Float_t curvErr=0;
+ Double_t rad1=TMath::Sqrt(gc1[0]*gc1[0]+gc1[1]*gc1[1]);
+ Double_t rad2=TMath::Sqrt(gc2[0]*gc2[0]+gc2[1]*gc2[1]);
+ Double_t factor=(rad1+rad2)/(rad2-rad1); //factor to account for error on tracklet direction
+
+ Double_t curvErr=0;
if(bField>0.00001){
- Float_t curvRadius=fMeanPtSelTrk/(0.3*bField)*100; //cm
- Float_t dRad=TMath::Sqrt(TMath::Power((gc1[0]-gc2[0]),2)+TMath::Power((gc1[1]-gc2[1]),2));
- Float_t aux=dRad/2.+rad1;
+ Double_t curvRadius=fMeanPtSelTrk/(0.3*bField)*100; //cm
+ Double_t dRad=TMath::Sqrt((gc1[0]-gc2[0])*(gc1[0]-gc2[0])+(gc1[1]-gc2[1])*(gc1[1]-gc2[1]));
+ Double_t aux=dRad/2.+rad1;
curvErr=TMath::Sqrt(curvRadius*curvRadius-dRad*dRad/4.)-TMath::Sqrt(curvRadius*curvRadius-aux*aux); //cm
}
-
- Float_t sigmasq[3];
+ Double_t sigmasq[3];
sigmasq[0]=(cov[0]+curvErr*curvErr/2.)*factor*factor;
sigmasq[1]=(cov[3]+curvErr*curvErr/2.)*factor*factor;
sigmasq[2]=cov[5]*factor*factor;
// Multiple scattering
- Float_t beta=1.;
- Float_t beta2=beta*beta;
- Float_t p2=fMeanPSelTrk*fMeanPSelTrk;
- Float_t rBP=GetPipeRadius();
- Float_t dBP=0.08/35.3; // 800 um of Be
- Float_t dL1=0.01; //approx. 1% of radiation length
- Float_t theta2BP=14.1*14.1/(beta2*p2*1e6)*TMath::Abs(dBP);
- Float_t theta2L1=14.1*14.1/(beta2*p2*1e6)*TMath::Abs(dL1);
- Float_t thetaBP=TMath::Sqrt(theta2BP);
- Float_t thetaL1=TMath::Sqrt(theta2L1);
-// Float_t geomfac[3];
-// geomfac[0]=sin(phi1)*sin(phi1);
-// geomfac[1]=cos(phi1)*cos(phi1);
-// Float_t tgth=(gc2[2]-gc1[2])/(rad2-rad1);
-// geomfac[2]=1+tgth*tgth;
+ Double_t pOverMass=fMeanPSelTrk/0.140;
+ Double_t beta2=pOverMass*pOverMass/(1+pOverMass*pOverMass);
+ Double_t p2=fMeanPSelTrk*fMeanPSelTrk;
+ Double_t rBP=GetPipeRadius();
+ Double_t dBP=0.08/35.3; // 800 um of Be
+ Double_t dL1=0.01; //approx. 1% of radiation length
+ Double_t theta2BP=14.1*14.1/(beta2*p2*1e6)*dBP;
+ Double_t theta2L1=14.1*14.1/(beta2*p2*1e6)*dL1;
+ Double_t rtantheta1=(rad2-rad1)*TMath::Tan(TMath::Sqrt(theta2L1));
+ Double_t rtanthetaBP=(rad1-rBP)*TMath::Tan(TMath::Sqrt(theta2BP));
for(Int_t ico=0; ico<3;ico++){
-// printf("Error on coord. %d due to cov matrix+curvErr=%f\n",ico,sigmasq[ico]);
-// // sigmasq[ico]+=rad1*rad1*geomfac[ico]*theta2L1/2; // multiple scattering in layer 1
-// // sigmasq[ico]+=rBP*rBP*geomfac[ico]*theta2BP/2; // multiple scattering in beam pipe
- sigmasq[ico]+=TMath::Power(rad1*TMath::Tan(thetaL1),2)/3.;
- sigmasq[ico]+=TMath::Power(rBP*TMath::Tan(thetaBP),2)/3.;
-
-// printf("Multipl. scatt. contr %d = %f (LAY1), %f (BP)\n",ico,rad1*rad1*geomfac[ico]*theta2L1/2,rBP*rBP*geomfac[ico]*theta2BP/2);
-// printf("Total error on coord %d = %f\n",ico,sigmasq[ico]);
+ sigmasq[ico]+=rtantheta1*rtantheta1*factor*factor/3.;
+ sigmasq[ico]+=rtanthetaBP*rtanthetaBP*factor*factor/3.;
}
- Float_t wmat[9]={1.,0.,0.,0.,1.,0.,0.,0.,1.};
+ Double_t wmat[9]={1.,0.,0.,0.,1.,0.,0.,0.,1.};
if(sigmasq[0]!=0.) wmat[0]=1./sigmasq[0];
if(sigmasq[1]!=0.) wmat[4]=1./sigmasq[1];
if(sigmasq[2]!=0.) wmat[8]=1./sigmasq[2];
- new(fLines[nolines++])AliStrLine(gc1,sigmasq,wmat,gc2,kTRUE);
+ new(fLines[nolines++])AliStrLine(gc1,sigmasq,wmat,gc2,kTRUE,idClu1,idClu2);
}
- detTypeRec.ResetRecPoints();
}
}
}
- prpl1.Clear();
}
+
+ if(fDoDownScale){
+ SetLaddersOnLayer2(origLaddersOnLayer2);
+ }
+
+
if(nolines == 0)return -2;
return nolines;
}
// Finds the 3D vertex information using tracklets
Int_t retcode = -1;
- Float_t xbeam=0.;
- Float_t ybeam=0.;
- Float_t zvert=0.;
- Float_t deltaR=fCoarseMaxRCut;
- Float_t dZmax=fZCutDiamond;
- if(optCuts){
+ Double_t xbeam=GetNominalPos()[0];
+ Double_t ybeam=GetNominalPos()[1];
+ Double_t zvert=0.;
+ Double_t deltaR=fCoarseMaxRCut;
+ Double_t dZmax=fZCutDiamond;
+ if(optCuts==1){
xbeam=fVert3D.GetXv();
ybeam=fVert3D.GetYv();
zvert=fVert3D.GetZv();
deltaR=fMaxRCut;
dZmax=fMaxZCut;
+ if(fPileupAlgo == 2){
+ dZmax=fZCutDiamond;
+ deltaR=fMaxRCut2;
+ }
+ }else if(optCuts==2){
+ xbeam=fVert3D.GetXv();
+ ybeam=fVert3D.GetYv();
+ deltaR=fMaxRCut;
+ }
+
+ Double_t origBinSizeR=fBinSizeR;
+ Double_t origBinSizeZ=fBinSizeZ;
+ if(fDoDownScale){
+ SetBinSizeR(0.05);
+ SetBinSizeZ(0.05);
}
- Int_t nbr=50;
- Float_t rl=-fCoarseMaxRCut;
- Float_t rh=fCoarseMaxRCut;
- Int_t nbz=100;
- Float_t zl=-fZCutDiamond;
- Float_t zh=fZCutDiamond;
- Float_t binsizer=(rh-rl)/nbr;
- Float_t binsizez=(zh-zl)/nbz;
+ Double_t rl=-fCoarseMaxRCut;
+ Double_t rh=fCoarseMaxRCut;
+ Double_t zl=-fZCutDiamond;
+ Double_t zh=fZCutDiamond;
+ Int_t nbr=(Int_t)((rh-rl)/fBinSizeR+0.0001);
+ Int_t nbz=(Int_t)((zh-zl)/fBinSizeZ+0.0001);
+ Int_t nbrcs=(Int_t)((rh-rl)/(fBinSizeR*2.)+0.0001);
+ Int_t nbzcs=(Int_t)((zh-zl)/(fBinSizeZ*2.)+0.0001);
+
TH3F *h3d = new TH3F("h3d","xyz distribution",nbr,rl,rh,nbr,rl,rh,nbz,zl,zh);
+ TH3F *h3dcs = new TH3F("h3dcs","xyz distribution",nbrcs,rl,rh,nbrcs,rl,rh,nbzcs,zl,zh);
// cleanup of the TCLonesArray of tracklets (i.e. fakes are removed)
- Int_t *validate = new Int_t [fLines.GetEntriesFast()];
- for(Int_t i=0; i<fLines.GetEntriesFast();i++)validate[i]=0;
- for(Int_t i=0; i<fLines.GetEntriesFast()-1;i++){
- if(validate[i]==1)continue;
+ Int_t vsiz = fLines.GetEntriesFast();
+ Int_t *validate = new Int_t [vsiz];
+ for(Int_t i=0; i<vsiz;i++)validate[i]=0;
+ for(Int_t i=0; i<vsiz-1;i++){
AliStrLine *l1 = (AliStrLine*)fLines.At(i);
for(Int_t j=i+1;j<fLines.GetEntriesFast();j++){
AliStrLine *l2 = (AliStrLine*)fLines.At(j);
- Float_t dca=l1->GetDCA(l2);
+ Double_t dca=l1->GetDCA(l2);
if(dca > fDCAcut || dca<0.00001) continue;
Double_t point[3];
Int_t retc = l1->Cross(l2,point);
validate[i]=1;
validate[j]=1;
h3d->Fill(point[0],point[1],point[2]);
+ h3dcs->Fill(point[0],point[1],point[2]);
}
}
Int_t numbtracklets=0;
- for(Int_t i=0; i<fLines.GetEntriesFast();i++)if(validate[i]>=1)numbtracklets++;
- if(numbtracklets<2){delete [] validate; delete h3d; return retcode; }
+ for(Int_t i=0; i<vsiz;i++)if(validate[i]>=1)numbtracklets++;
+ if(numbtracklets<2){
+ delete [] validate;
+ delete h3d;
+ delete h3dcs;
+ return retcode;
+ }
for(Int_t i=0; i<fLines.GetEntriesFast();i++){
if(validate[i]<1)fLines.RemoveAt(i);
AliDebug(1,Form("Number of tracklets (after compress)%d ",fLines.GetEntriesFast()));
delete [] validate;
+ // Exit here if Pileup Algorithm 2 has been chosen during second loop
+ if(fPileupAlgo == 2 && optCuts==1){
+ delete h3d;
+ delete h3dcs;
+ return 0;
+ }
+
+ // Find peaks in histos
- // finds peak in histo
- TAxis *xax = h3d->GetXaxis();
- TAxis *yax = h3d->GetYaxis();
- TAxis *zax = h3d->GetZaxis();
Double_t peak[3]={0.,0.,0.};
- Float_t contref = 0.;
- for(Int_t i=xax->GetFirst();i<=xax->GetLast();i++){
- Float_t xval = xax->GetBinCenter(i);
- for(Int_t j=yax->GetFirst();j<=yax->GetLast();j++){
- Float_t yval = yax->GetBinCenter(j);
- for(Int_t k=zax->GetFirst();k<=zax->GetLast();k++){
- Float_t bc = h3d->GetBinContent(i,j,k);
- Float_t zval = zax->GetBinCenter(k);
- if(bc>contref){
- contref = bc;
- peak[2] = zval;
- peak[1] = yval;
- peak[0] = xval;
- }
+ Int_t ntrkl,ntimes;
+ FindPeaks(h3d,peak,ntrkl,ntimes);
+ delete h3d;
+ Double_t binsizer=(rh-rl)/nbr;
+ Double_t binsizez=(zh-zl)/nbz;
+ if(optCuts==0 && (ntrkl<=2 || ntimes>1)){
+ ntrkl=0;
+ ntimes=0;
+ FindPeaks(h3dcs,peak,ntrkl,ntimes);
+ binsizer=(rh-rl)/nbrcs;
+ binsizez=(zh-zl)/nbzcs;
+ if(ntrkl==1 || ntimes>1){delete h3dcs; return retcode;}
+ }
+ delete h3dcs;
+
+ // Finer Histo in limited range in case of high mult.
+ if(fDoDownScale){
+ SetBinSizeR(0.01);
+ SetBinSizeZ(0.01);
+ Double_t xl=peak[0]-0.3;
+ Double_t xh=peak[0]+0.3;
+ Double_t yl=peak[1]-0.3;
+ Double_t yh=peak[1]+0.3;
+ zl=peak[2]-0.5;
+ zh=peak[2]+0.5;
+ Int_t nbxfs=(Int_t)((xh-xl)/fBinSizeR+0.0001);
+ Int_t nbyfs=(Int_t)((yh-yl)/fBinSizeR+0.0001);
+ Int_t nbzfs=(Int_t)((zh-zl)/fBinSizeZ+0.0001);
+
+ TH3F *h3dfs = new TH3F("h3dfs","xyz distribution",nbxfs,xl,xh,nbyfs,yl,yh,nbzfs,zl,zh);
+ for(Int_t i=0; i<fLines.GetEntriesFast()-1;i++){
+ AliStrLine *l1 = (AliStrLine*)fLines.At(i);
+ for(Int_t j=i+1;j<fLines.GetEntriesFast();j++){
+ AliStrLine *l2 = (AliStrLine*)fLines.At(j);
+ Double_t point[3];
+ Int_t retc = l1->Cross(l2,point);
+ if(retc<0)continue;
+ h3dfs->Fill(point[0],point[1],point[2]);
}
}
+ ntrkl=0;
+ ntimes=0;
+
+ Double_t newpeak[3]={0.,0.,0.};
+ FindPeaks(h3dfs,newpeak,ntrkl,ntimes);
+ if(ntimes==1){
+ for(Int_t iCoo=0; iCoo<3; iCoo++) peak[iCoo]=newpeak[iCoo];
+ binsizer=fBinSizeR;
+ binsizez=fBinSizeZ;
+ }
+ delete h3dfs;
+ SetBinSizeR(origBinSizeR);
+ SetBinSizeZ(origBinSizeZ);
}
- delete h3d;
+
// Second selection loop
- Float_t bs=(binsizer+binsizez)/2.;
+
+ Double_t bs=(binsizer+binsizez)/2.;
for(Int_t i=0; i<fLines.GetEntriesFast();i++){
AliStrLine *l1 = (AliStrLine*)fLines.At(i);
if(l1->GetDistFromPoint(peak)>2.5*bs)fLines.RemoveAt(i);
AliDebug(1,Form("Number of tracklets (after 2nd compression) %d",fLines.GetEntriesFast()));
if(fLines.GetEntriesFast()>1){
+ retcode=0;
// find a first candidate for the primary vertex
fVert3D=AliVertexerTracks::TrackletVertexFinder(&fLines,0);
// make a further selection on tracklets based on this first candidate
fVert3D.GetXYZ(peak);
AliDebug(1,Form("FIRST V candidate: %f ; %f ; %f",peak[0],peak[1],peak[2]));
+ Int_t *validate2 = new Int_t [fLines.GetEntriesFast()];
+ for(Int_t i=0; i<fLines.GetEntriesFast();i++) validate2[i]=1;
for(Int_t i=0; i<fLines.GetEntriesFast();i++){
+ if(validate2[i]==0) continue;
AliStrLine *l1 = (AliStrLine*)fLines.At(i);
if(l1->GetDistFromPoint(peak)> fDCAcut)fLines.RemoveAt(i);
+ if(optCuts==2){ // temporarily only for pileup
+ for(Int_t j=i+1; j<fLines.GetEntriesFast();j++){
+ AliStrLine *l2 = (AliStrLine*)fLines.At(j);
+ if(l1->GetDCA(l2)<0.00001){
+ Int_t delta1=(Int_t)l1->GetIdPoint(0)-(Int_t)l2->GetIdPoint(0);
+ Int_t delta2=(Int_t)l1->GetIdPoint(1)-(Int_t)l2->GetIdPoint(1);
+ Int_t deltamod1=(Int_t)l1->GetIdPoint(0)/kMaxCluPerMod
+ -(Int_t)l2->GetIdPoint(0)/kMaxCluPerMod;
+ Int_t deltamod2=(Int_t)l1->GetIdPoint(1)/kMaxCluPerMod
+ -(Int_t)l2->GetIdPoint(1)/kMaxCluPerMod;
+ // remove tracklets sharing a point
+ if( (delta1==0 && deltamod2==0) ||
+ (delta2==0 && deltamod1==0) ) validate2[j]=0;
+ }
+ }
+ }
}
+ for(Int_t i=0; i<fLines.GetEntriesFast();i++){
+ if(validate2[i]==0) fLines.RemoveAt(i);
+ }
+ delete [] validate2;
fLines.Compress();
AliDebug(1,Form("Number of tracklets (after 3rd compression) %d",fLines.GetEntriesFast()));
- if(fLines.GetEntriesFast()>1) retcode=0; // this new tracklet selection is used
- else retcode =1; // the previous tracklet selection will be used
- }
- else {
- retcode = 0;
+ if(fLines.GetEntriesFast()>1){// this new tracklet selection is used
+ fVert3D=AliVertexerTracks::TrackletVertexFinder(&fLines,0);
+ }
}
return retcode;
}
//________________________________________________________
-void AliITSVertexer3D::SetMeanPPtSelTracks(Float_t fieldTesla){
- // Sets mean values of P and Pt based on the field
+void AliITSVertexer3D::SetMeanPPtSelTracks(Double_t fieldTesla){
+ // Sets mean values of Pt based on the field
+ // for P (used in multiple scattering) the most probable value is used
if(TMath::Abs(fieldTesla-0.5)<0.01){
- SetMeanPSelTracks(0.885);
+ SetMeanPSelTracks(0.375);
SetMeanPtSelTracks(0.630);
}else if(TMath::Abs(fieldTesla-0.4)<0.01){
- SetMeanPSelTracks(0.805);
+ SetMeanPSelTracks(0.375);
SetMeanPtSelTracks(0.580);
}else if(TMath::Abs(fieldTesla-0.2)<0.01){
- SetMeanPSelTracks(0.740);
+ SetMeanPSelTracks(0.375);
SetMeanPtSelTracks(0.530);
}else if(fieldTesla<0.00001){
- SetMeanPSelTracks(0.730);
- SetMeanPtSelTracks(0.510);
+ SetMeanPSelTracks(0.375);
+ SetMeanPtSelTracks(0.230);
}else{
SetMeanPSelTracks();
SetMeanPtSelTracks();
}
}
+//________________________________________________________
+void AliITSVertexer3D::FindPeaks(TH3F* histo, Double_t *peak, Int_t &nOfTracklets, Int_t &nOfTimes){
+ // Finds bin with max contents in 3D histo of tracket intersections
+ TAxis *xax = histo->GetXaxis();
+ TAxis *yax = histo->GetYaxis();
+ TAxis *zax = histo->GetZaxis();
+ peak[0]=0.;
+ peak[1]=0.;
+ peak[2]=0.;
+ nOfTracklets = 0;
+ nOfTimes=0;
+ Int_t peakbin[3]={0,0,0};
+ Int_t peak2bin[3]={-1,-1,-1};
+ Int_t bc2=-1;
+ for(Int_t i=xax->GetFirst();i<=xax->GetLast();i++){
+ Double_t xval = xax->GetBinCenter(i);
+ for(Int_t j=yax->GetFirst();j<=yax->GetLast();j++){
+ Double_t yval = yax->GetBinCenter(j);
+ for(Int_t k=zax->GetFirst();k<=zax->GetLast();k++){
+ Double_t zval = zax->GetBinCenter(k);
+ Int_t bc =(Int_t)histo->GetBinContent(i,j,k);
+ if(bc==0) continue;
+ if(bc>nOfTracklets){
+ nOfTracklets=bc;
+ peak[2] = zval;
+ peak[1] = yval;
+ peak[0] = xval;
+ peakbin[2] = k;
+ peakbin[1] = j;
+ peakbin[0] = i;
+ peak2bin[2] = -1;
+ peak2bin[1] = -1;
+ peak2bin[0] = -1;
+ bc2=-1;
+ nOfTimes = 1;
+ }else if(bc==nOfTracklets){
+ if(TMath::Abs(i-peakbin[0])<=1 && TMath::Abs(j-peakbin[1])<=1 && TMath::Abs(k-peakbin[2])<=1){
+ peak2bin[2] = k;
+ peak2bin[1] = j;
+ peak2bin[0] = i;
+ bc2=bc;
+ nOfTimes = 1;
+ }else{
+ nOfTimes++;
+ }
+ }
+ }
+ }
+ }
+ if(peak2bin[0]>=-1 && bc2!=-1){ // two contiguous peak-cells with same contents
+ peak[0]=0.5*(xax->GetBinCenter(peakbin[0])+xax->GetBinCenter(peak2bin[0]));
+ peak[1]=0.5*(yax->GetBinCenter(peakbin[1])+yax->GetBinCenter(peak2bin[1]));
+ peak[2]=0.5*(zax->GetBinCenter(peakbin[2])+zax->GetBinCenter(peak2bin[2]));
+ nOfTracklets+=bc2;
+ nOfTimes=1;
+ }
+}
+//________________________________________________________
+void AliITSVertexer3D::MarkUsedClusters(){
+ // Mark clusters of tracklets used in vertex claulation
+ for(Int_t i=0; i<fLines.GetEntriesFast();i++){
+ AliStrLine *lin = (AliStrLine*)fLines.At(i);
+ Int_t idClu1=lin->GetIdPoint(0);
+ Int_t idClu2=lin->GetIdPoint(1);
+ fUsedCluster.SetBitNumber(idClu1);
+ fUsedCluster.SetBitNumber(idClu2);
+ }
+}
+//________________________________________________________
+Int_t AliITSVertexer3D::RemoveTracklets(){
+ // Remove trackelts close to first found vertex
+ Double_t vert[3]={fVert3D.GetXv(),fVert3D.GetYv(),fVert3D.GetZv()};
+ Int_t nRemoved=0;
+ for(Int_t i=0; i<fLines.GetEntriesFast();i++){
+ AliStrLine *lin = (AliStrLine*)fLines.At(i);
+ if(lin->GetDistFromPoint(vert)<fDCAforPileup){
+ Int_t idClu1=lin->GetIdPoint(0);
+ Int_t idClu2=lin->GetIdPoint(1);
+ fUsedCluster.SetBitNumber(idClu1);
+ fUsedCluster.SetBitNumber(idClu2);
+ fLines.RemoveAt(i);
+ ++nRemoved;
+ }
+ }
+ fLines.Compress();
+ return nRemoved;
+}
+//________________________________________________________
+void AliITSVertexer3D::FindOther3DVertices(TTree *itsClusterTree){
+ // pileup identification based on 3D vertexing with not used clusters
+ fVertArray = new AliESDVertex[kMaxPileupVertices+1];
+ fVertArray[0]=(*fCurrentVertex);
+ Int_t nFoundVert=1;
+ for(Int_t iPilV=1; iPilV<=kMaxPileupVertices; iPilV++){
+ MarkUsedClusters();
+ fLines.Clear("C");
+ Int_t nolines = FindTracklets(itsClusterTree,2);
+ if(nolines>=2){
+ Int_t nr=RemoveTracklets();
+ nolines-=nr;
+ if(nolines>=2){
+ Int_t rc=Prepare3DVertex(2);
+ if(rc==0){
+ fVert3D=AliVertexerTracks::TrackletVertexFinder(&fLines,0);
+ if(fVert3D.GetNContributors()>=fMinTrackletsForPilup){
+ fIsPileup=kTRUE;
+ fVertArray[nFoundVert]=fVert3D;
+ nFoundVert++;
+ if(nFoundVert==2){
+ fZpuv=fVert3D.GetZv();
+ fNTrpuv=fVert3D.GetNContributors();
+ }
+ }
+ }
+ }
+ }
+ }
+ fNoVertices=nFoundVert;
+}
+//______________________________________________________________________
+void AliITSVertexer3D::PileupFromZ(){
+ // Calls the pileup algorithm of ALiITSVertexerZ
+ Int_t binmin, binmax;
+ Int_t nPeaks=AliITSVertexerZ::GetPeakRegion(fZHisto,binmin,binmax);
+ if(nPeaks==2)AliWarning("2 peaks found");
+ Int_t firstPeakCont=0;
+ Double_t firstPeakPos=0.;
+ for(Int_t i=binmin-1;i<=binmax+1;i++){
+ firstPeakCont+=static_cast<Int_t>(fZHisto->GetBinContent(i));
+ firstPeakPos+=fZHisto->GetBinContent(i)*fZHisto->GetBinCenter(i);
+ }
+ if(firstPeakCont>0){
+ firstPeakPos/=firstPeakCont;
+ Int_t ncontr2=0;
+ if(firstPeakCont>fMinTrackletsForPilup){
+ Float_t secPeakPos;
+ ncontr2=AliITSVertexerZ::FindSecondPeak(fZHisto,binmin,binmax,secPeakPos);
+ if(ncontr2>=fMinTrackletsForPilup){
+ fIsPileup=kTRUE;
+ fNoVertices=2;
+ AliESDVertex secondVert(secPeakPos,0.1,ncontr2);
+ fVertArray = new AliESDVertex[2];
+ fVertArray[0]=(*fCurrentVertex);
+ fVertArray[1]=secondVert;
+ fZpuv=secPeakPos;
+ fNTrpuv=ncontr2;
+ }
+ }
+ }
+}
//________________________________________________________
void AliITSVertexer3D::PrintStatus() const {
// Print current status
- printf("=======================================================\n");
- printf("Loose cut on Delta Phi %f\n",fCoarseDiffPhiCut);
- printf("Cut on tracklet DCA to Z axis %f\n",fCoarseMaxRCut);
- printf("Cut on tracklet DCA to beam axis %f\n",fMaxRCut);
+ printf("========= First step selections =====================\n");
printf("Cut on diamond (Z) %f\n",fZCutDiamond);
+ printf("Loose cut on Delta Phi %f\n",fCoarseDiffPhiCut);
+ printf("Loose cut on tracklet DCA to Z axis %f\n",fCoarseMaxRCut);
printf("Cut on DCA - tracklet to tracklet and to vertex %f\n",fDCAcut);
- printf(" Max Phi difference: %f\n",fDiffPhiMax);
+ printf("========= Second step selections ====================\n");
+ printf("Cut on tracklet-to-first-vertex Z distance %f\n",fMaxZCut);
+ printf("Max Phi difference: %f\n",fDiffPhiMax);
+ printf("Cut on tracklet DCA to beam axis %f\n",fMaxRCut);
+ printf("Cut on tracklet DCA to beam axis (algo2) %f\n",fMaxRCut2);
+ printf("========= Pileup selections =========================\n");
+ printf("Pileup algo: %d\n",fPileupAlgo);
+ printf("Min DCA to 1st vertex for pileup (algo 0 and 1): %f\n",fDCAforPileup);
+ printf("Cut on distance between pair-vertices (algo 2): %f\n",fCutOnPairs);
+ printf("Maximum number of clusters allowed on L1 or L2: %d\n",fMaxNumOfCl);
printf("=======================================================\n");
}
+