* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-*/
+/* $Id$ */
///////////////////////////////////////////////////////////////////////
-// ITS geometry manimulaiton routines. //
+// ITS geometry manipulation routines. //
// Created April 15 1999. //
// version: 0.0.0 //
// By: Bjorn S. Nilsen //
// version: 0.0.1 //
// Updated May 27 1999. //
-// Added Cylinderical random and global based changes. //
+// Added Cylindrical random and global based changes. //
// Added function PrintComparison. //
///////////////////////////////////////////////////////////////////////
-#include <iostream.h>
-#include <fstream.h>
-#include <iomanip.h>
-#include <stdio.h>
+
+
+////////////////////////////////////////////////////////////////////////
+// The local coordinate system by, default, is show in the following
+// figures. Also shown are the ladder numbering scheme.
+//Begin_Html
+/*
+<img src="picts/ITS/AliITSgeomMatrix_L1.gif">
+</pre>
+<br clear=left>
+<font size=+2 color=blue>
+<p>This shows the relative geometry differences between the ALICE Global
+coordinate system and the local detector coordinate system.
+</font>
+<pre>
+
+<pre>
+<img src="picts/ITS/its1+2_convention_front_5.gif">
+</pre>
+<br clear=left>
+<font size=+2 color=blue>
+<p>This shows the front view of the SPDs and the orientation of the local
+pixel coordinate system. Note that the inner pixel layer has its y coordinate
+in the opposite direction from all of the other layers.
+</font>
+<pre>
+
+<pre>
+<img src="picts/ITS/its3+4_convention_front_5.gif">
+</pre>
+<br clear=left>
+<font size=+2 color=blue>
+<p>This shows the front view of the SDDs and the orientation of the local
+pixel coordinate system.
+</font>
+<pre>
+
+<pre>
+<img src="picts/ITS/its5+6_convention_front_5.gif">
+</pre>
+<br clear=left>
+<font size=+2 color=blue>
+<p>This shows the front view of the SSDs and the orientation of the local
+pixel coordinate system.
+</font>
+<pre>
+*/
+//End_Html
+//
+////////////////////////////////////////////////////////////////////////
+
+////////////////////////////////////////////////////////////////////////
+//
+// version: 0
+// Written by Bjorn S. Nilsen
+//
+// Data Members:
+//
+// Int_t fNlayers
+// The number of ITS layers for this geometry. By default this
+// is 6, but can be modified by the creator function if there are
+// more layers defined.
+//
+// Int_t *fNlad
+// A pointer to an array fNlayers long containing the number of
+// ladders for each layer. This array is typically created and filled
+// by the AliITSgeom creator function.
+//
+// Int_t *fNdet
+// A pointer to an array fNlayers long containing the number of
+// active detector volumes for each ladder. This array is typically
+// created and filled by the AliITSgeom creator function.
+//
+// AliITSgeomMatrix *fGm
+// A pointer to an array of AliITSgeomMatrix classes. One element
+// per module (detector) in the ITS. AliITSgeomMatrix basicly contains
+// all of the necessary information about the detector and it's coordinate
+// transformations.
+//
+// TObjArray *fShape
+// A pointer to an array of TObjects containing the detailed shape
+// information for each type of detector used in the ITS. For example
+// I have created AliITSgeomSPD, AliITSgeomSDD, and AliITSgeomSSD as
+// example structures, derived from TObjects, to hold the detector
+// information. I would recommend that one element in each of these
+// structures, that which describes the shape of the active volume,
+// be one of the ROOT classes derived from TShape. In this way it would
+// be easy to have the display program display the correct active
+// ITS volumes. See the example classes AliITSgeomSPD, AliITSgeomSDD,
+// and AliITSgeomSSD for a more detailed example.
+////////////////////////////////////////////////////////////////////////
+#include <Riostream.h>
+
+#include <TRandom.h>
+#include <TSystem.h>
+
#include "AliITSgeom.h"
-#include "TRandom.h"
+#include "AliITSgeomSDD.h"
+#include "AliITSgeomSPD.h"
+#include "AliITSgeomSSD.h"
+#include "AliLog.h"
ClassImp(AliITSgeom)
-//_____________________________________________________________________
+//______________________________________________________________________
AliITSgeom::AliITSgeom(){
-////////////////////////////////////////////////////////////////////////
-// The default constructor for the AliITSgeom class. It, by default,
-// sets fNlayers to zero and zeros all pointers.
-////////////////////////////////////////////////////////////////////////
- // Default constructor.
- // Do not allocate anything zero everything
- fNlayers = 0;
- fNlad = 0;
- fNdet = 0;
- fg = 0;
- fShape = 0;
- return;
+ // The default constructor for the AliITSgeom class. It, by default,
+ // sets fNlayers to zero and zeros all pointers.
+ // Do not allocate anything zero everything.
+
+ fTrans = 0; // standard GEANT global/local coordinate system.
+ fNlayers = 0;
+ fNlad = 0;
+ fNdet = 0;
+ fGm = 0;
+ fShape = 0;
+ strcpy(fVersion,"test");
+ return;
}
+//______________________________________________________________________
+AliITSgeom::AliITSgeom(Int_t itype,Int_t nlayers,Int_t *nlads,Int_t *ndets,
+ Int_t mods){
+ // A simple constructor to set basic geometry class variables
+ // Inputs:
+ // Int_t itype the type of transformation kept.
+ // bit 0 => Standard GEANT
+ // bit 1 => ITS tracking
+ // bit 2 => A change in the coordinate system has been made.
+ // others are still to be defined as needed.
+ // Int_t nlayers The number of ITS layers also set the size of the arrays
+ // Int_t *nlads an array of the number of ladders for each layer. This
+ // array must be nlayers long.
+ // Int_t *ndets an array of the number of detectors per ladder for each
+ // layer. This array must be nlayers long.
+ // Int_t mods The number of modules. Typicaly the sum of all the
+ // detectors on every layer and ladder.
+ // Outputs:
+ // none
+ Int_t i;
-//_____________________________________________________________________
+ fTrans = itype;
+ fNlayers = nlayers;
+ fNlad = new Int_t[nlayers];
+ fNdet = new Int_t[nlayers];
+ for(i=0;i<nlayers;i++){fNlad[i] = nlads[i];fNdet[i] = ndets[i];}
+ fNmodules = mods;
+ fGm = new TObjArray(mods,0);
+ fShape = new TObjArray(5); // default value
+ for(i=0;i<5;i++) fShape->AddAt(0,i);
+ strcpy(fVersion,"test");
+ return;
+}
+//______________________________________________________________________
+void AliITSgeom::CreatMatrix(Int_t mod,Int_t lay,Int_t lad,Int_t det,
+ AliITSDetector idet,const Double_t tran[3],
+ const Double_t rot[10]){
+ // Given the translation vector tran[3] and the rotation matrix rot[1],
+ // this function creates and adds to the TObject Array fGm the
+ // AliITSgeomMatrix object.
+ // Inputs are:
+ // Int_t mod The module number. The location in TObjArray
+ // Int_t lay The layer where this module is
+ // Int_t lad On which ladder this module is
+ // Int_t det Which detector on this ladder this module is
+ // AliITSDetector idet The type of detector see AliITSgeom.h
+ // Double_t tran[3] The translation vector
+ // Double_t rot[10] The rotation matrix.
+ // Outputs are:
+ // none
+ // The rot[10] matrix is set up like:
+ /* / rot[0] rot[1] rot[2] \
+ // | rot[3] rot[4] rot[5] |
+ // \ rot[6] rot[7] rot[8] / if(rot[9]!=0) then the Identity matrix
+ // is used regardless of the values in rot[0]-rot[8].
+ */
+ Int_t id[3];
+ Double_t r[3][3] = {{1.0,0.0,0.0},{0.0,1.0,0.0},{0.0,0.0,1.0}};
+
+ if(fGm->At(mod)!=0) delete fGm->At(mod);
+ id[0] = lay; id[1] = lad; id[2] = det;
+ if(rot[9]!=0.0) { // null rotation
+ r[0][0] = rot[0]; r[0][1] = rot[1]; r[0][2] = rot[2];
+ r[1][0] = rot[3]; r[1][1] = rot[4]; r[1][2] = rot[5];
+ r[2][0] = rot[6]; r[2][1] = rot[7]; r[2][2] = rot[8];
+ } // end if
+ fGm->AddAt(new AliITSgeomMatrix(idet,id,r,tran),mod);
+}
+//______________________________________________________________________
AliITSgeom::~AliITSgeom(){
-////////////////////////////////////////////////////////////////////////
-// The destructor for the AliITSgeom class. If the arrays fNlad,
-// fNdet, or fg have had memory allocated to them, there pointer values
-// are non zero, then this memory space is freed and they are set
-// to zero. In addition, fNlayers is set to zero. The destruction of
-// TObjArray fShape is, by default, handled by the TObjArray destructor.
-////////////////////////////////////////////////////////////////////////
- // Default destructor.
- // if arrays exist delet them. Then set everything to zero.
- if(fg!=0){
- for(Int_t i=0;i<fNlayers;i++) delete[] fg[i];
- delete[] fg;
- } // end if fg!=0
+ // The destructor for the AliITSgeom class. If the arrays fNlad,
+ // fNdet, or fGm have had memory allocated to them, there pointer values
+ // are non zero, then this memory space is freed and they are set
+ // to zero. In addition, fNlayers is set to zero. The destruction of
+ // TObjArray fShape is, by default, handled by the TObjArray destructor.
+
+ if(fGm!=0){
+ //for(Int_t i=0;i<fNlayers;i++) delete fGm->At(i);
+ fGm->Delete();
+ delete fGm;
+ } // end if fGm!=0
if(fNlad!=0) delete[] fNlad;
if(fNdet!=0) delete[] fNdet;
fNlayers = 0;
fNlad = 0;
fNdet = 0;
- fg = 0;
+ fGm = 0;
return;
}
+//______________________________________________________________________
+void AliITSgeom::ReadNewFile(const char *filename){
+ // It is generaly preferred to define the geometry in AliITSgeom
+ // directly from the GEANT geometry, see AliITSvPPRasymm.cxx for
+ // and example. Under some circumstances this may not be possible.
+ // This function will read in a formatted file for all of the
+ // information needed to define the geometry in AliITSgeom.
+ // Unlike the older file format, this file may contain comments
+ // and the order of the data does not need to be completely
+ // respected. A file can be created using the function WriteNewFile
+ // defined below.
+ // Inputs are:
+ // const char *filename The file name of the file to be read in.
+ // Outputs are:
+ // none
+ Int_t ncmd=9;
+ const char *cmda[]={"Version" ,"fTrans" ,"fNmodules",
+ "fNlayers" ,"fNladers","fNdetectors",
+ "fNDetectorTypes","fShape" ,"Matrix"};
+ Int_t i,j,lNdetTypes,ldet;
+ char cmd[20],c;
+ AliITSgeomSPD *spd=0;
+ AliITSgeomSDD *sdd=0;
+ AliITSgeomSSD *ssd=0;
+ AliITSgeomMatrix *m=0;
+ ifstream *fp=0;
+ char *filtmp=0;
-//_____________________________________________________________________
-AliITSgeom::AliITSgeom(const char *filename){
-////////////////////////////////////////////////////////////////////////
-// The constructor for the AliITSgeom class. All of the data to fill
-// this structure is read in from the file given my the input filename.
-////////////////////////////////////////////////////////////////////////
- FILE *pf;
- Int_t i;
- ITS_geom *g;
- Int_t l,a,d;
- Float_t x,y,z,o,p,q,r,s,t;
- Double_t or,pr,qr,rr,sr,tr; // Radians
- Double_t lr[9];
- Double_t si; // sin(angle)
- Double_t PI = TMath::Pi(), byPI = PI/180.;
-
- pf = fopen(filename,"r");
-
- fNlayers = 6; // set default number of ladders
- fNlad = new Int_t[fNlayers];
- fNdet = new Int_t[fNlayers];
- // find the number of laders and detectors in this geometry.
- for(i=0;i<fNlayers;i++){fNlad[i]=fNdet[i]=0;} // zero out arrays
- for(;;){ // for ever loop
- i = fscanf(pf,"%d %d %d %f %f %f %f %f %f %f %f %f",
- &l,&a,&d,&x,&y,&z,&o,&p,&q,&r,&s,&t);
- if(i==EOF) break;
- if(l<1 || l>fNlayers) {
- printf("error in file %s layer=%d min is 1 max is %d/n",
- filename,l,fNlayers);
- continue;
- }// end if l
- if(fNlad[l-1]<a) fNlad[l-1] = a;
- if(fNdet[l-1]<d) fNdet[l-1] = d;
- } // end for ever loop
- // counted the number of laders and detectors now allocate space.
- fg = new ITS_geom* [fNlayers];
- for(i=0;i<fNlayers;i++){
- fg[i] = 0;
- l = fNlad[i]*fNdet[i];
- fg[i] = new ITS_geom[l]; // allocate space for transforms
- } // end for i
+ filtmp = gSystem->ExpandPathName(filename);
+ AliInfo(Form("Reading New .det file %s",filtmp));
+ fp = new ifstream(filtmp,ios::in); // open file to write
+ while(fp->get(c)!=NULL){ // for ever loop
+ if(c==' ') continue; // remove blanks
+ if(c=='\n') continue;
+ if(c=='#' || c=='!') {while(fp->get(c)) if(c=='\n') break; continue;}
+ if(c=='/'){
+ fp->get(c);{
+ if(c=='/') {while(fp->get(c)) if(c=='\n') break; continue;}
+ if(c=='*'){
+ NotYet:
+ while(fp->get(c)) if(c=='*') break;
+ fp->get(c);{
+ if(c=='/') continue;
+ goto NotYet;
+ } //
+ } // end if c=='*'
+ } // end if second /
+ } // end if first /
+ fp->putback(c);
+ *fp >> cmd;
+ for(i=0;i<ncmd;i++) if(strcmp(cmd,cmda[i])==0) break;
+ switch (i){
+ case 0: // Version
+ *fp >> fVersion;
+ break;
+ case 1: // fTrans
+ *fp >> fTrans;
+ break;
+ case 2: // fNModules
+ *fp >> fNmodules;
+ if(fGm!=0){
+ for(j=0;j<fGm->GetEntriesFast();j++) delete fGm->At(j);
+ delete fGm;
+ } // end if
+ fGm = new TObjArray(fNmodules,0);
+ break;
+ case 3: // fNlayers
+ *fp >> fNlayers;
+ if(fNlad!=0) delete fNlad;
+ if(fNdet!=0) delete fNdet;
+ fNlad = new Int_t[fNlayers];
+ fNdet = new Int_t[fNlayers];
+ break;
+ case 4: // fNladers
+ for(j=0;j<fNlayers;j++) *fp >> fNlad[j];
+ break;
+ case 5: // fNdetectors
+ for(j=0;j<fNlayers;j++) *fp >> fNdet[j];
+ break;
+ case 6: // fNDetectorTypes
+ *fp >> lNdetTypes;
+ if(fShape!=0){
+ for(j=0;j<fShape->GetEntriesFast();j++) delete fShape->At(j);
+ delete fShape;
+ } // end if
+ fShape = new TObjArray(lNdetTypes,0);
+ break;
+ case 7: // fShape
+ *fp >> ldet;
+ if(fShape==0) fShape = new TObjArray(5,0);
+ switch (ldet){
+ case kSPD :
+ spd = new AliITSgeomSPD();
+ *fp >> *spd;
+ ReSetShape(ldet,spd);
+ spd = 0;
+ break;
+ case kSDD : case kSDDp:
+ sdd = new AliITSgeomSDD();
+ *fp >> *sdd;
+ ReSetShape(ldet,sdd);
+ sdd = 0;
+ break;
+ case kSSD : case kSSDp :
+ ssd = new AliITSgeomSSD();
+ *fp >> *ssd;
+ ReSetShape(ldet,ssd);
+ ssd = 0;
+ break;
+ default:
+ AliError(Form("Unknown fShape type number=%d c=%c",ldet,c));
+ while(fp->get(c)) if(c=='\n') break; // skip to end of line.
+ break;
+ } // end switch
+ break;
+ case 8: // Matrix
+ *fp >> ldet;
+ if(fGm==0) fGm = new TObjArray(2270,0);
+ if(fGm->At(ldet)!=0) delete (fGm->At(ldet));
+ fGm->AddAt((TObject*)new AliITSgeomMatrix(),ldet);
+ m = (AliITSgeomMatrix*) fGm->At(ldet);
+ *fp >> *m;
+ m = 0;
+ break;
+ default:
+ AliError(Form("ReadNewFile","Data line i=%d c=%c",i,c));
+ while(fp->get(c)) if(c=='\n') break; // skip this line
+ break;
+ } // end switch i
+ } // end while
+ delete fp;
- // Set up Shapes for a default configuration of 6 layers.
- fShape = new TObjArray;
- AddShape((TObject *) new AliITSgeomSPD()); // shape 0
- AddShape((TObject *) new AliITSgeomSDD()); // shape 1
- AddShape((TObject *) new AliITSgeomSPD()); // shape 2
-
- // prepair to read in transforms
- rewind(pf); // start over reading file
- for(;;){ // for ever loop
- i = fscanf(pf,"%d %d %d %f %f %f %f %f %f %f %f %f",
- &l,&a,&d,&x,&y,&z,&o,&p,&q,&r,&s,&t);
- if(i==EOF) break;
- if(l<1 || l>fNlayers) {
- printf("error in file %s layer=%d min is 1 max is %d/n",
- filename,l,fNlayers);
- continue;
- }// end if l
- l--; a--; d--; // shift layer, lader, and detector counters to zero base
- i = d + a*fNdet[l]; // position of this detector
- g = &(fg[l][i]);
-
- or = byPI*o;
- pr = byPI*p;
- qr = byPI*q;
- rr = byPI*r;
- sr = byPI*s;
- tr = byPI*t;
-
- g->fx0 = x;
- g->fy0 = y;
- g->fz0 = z;
- si = sin(or);if(o== 90.0) si = +1.0;
- if(o==270.0) si = -1.0;
- if(o== 0.0||o==180.) si = 0.0;
- lr[0] = si * cos(pr);
- lr[1] = si * sin(pr);
- lr[2] = cos(or);if(o== 90.0||o==270.) lr[2] = 0.0;
- if(o== 0.0) lr[2] = +1.0;
- if(o==180.0) lr[2] = -1.0;
- si = sin(qr);if(q== 90.0) si = +1.0;
- if(q==270.0) si = -1.0;
- if(q== 0.0||q==180.) si = 0.0;
- lr[3] = si * cos(rr);
- lr[4] = si * sin(rr);
- lr[5] = cos(qr);if(q== 90.0||q==270.) lr[5] = 0.0;
- if(q== 0.0) lr[5] = +1.0;
- if(q==180.0) lr[5] = -1.0;
- si = sin(sr);if(r== 90.0) si = +1.0;
- if(r==270.0) si = -1.0;
- if(r== 0.0||r==180.) si = 0.0;
- lr[6] = si * cos(tr);
- lr[7] = si * sin(tr);
- lr[8] = cos(sr);if(r== 90.0||r==270.0) lr[8] = 0.0;
- if(r== 0.0) lr[8] = +1.0;
- if(r==180.0) lr[8] = -1.0;
- // Normalize these elements
- for(a=0;a<3;a++){// reuse float si and integers a and d.
- si = 0.0;
- for(d=0;d<3;d++) si += lr[3*a+d]*lr[3*a+d];
- si = TMath::Sqrt(1./si);
- for(d=0;d<3;d++) g->fr[3*a+d] = lr[3*a+d] = si*lr[3*a+d];
- } // end for a
- // get angles from matrix up to a phase of 180 degrees.
- or = atan2(lr[7],lr[8]);if(or<0.0) or += 2.0*PI;
- pr = asin(lr[2]); if(pr<0.0) pr += 2.0*PI;
- qr = atan2(lr[3],lr[0]);if(qr<0.0) qr += 2.0*PI;
- g->frx = or;
- g->fry = pr;
- g->frz = qr;
- // l = layer-1 at this point.
- if(l==0||l==1) g->fShapeIndex = 0; // SPD's
- else if(l==2||l==3) g->fShapeIndex = 1; // SDD's
- else if(l==4||l==5) g->fShapeIndex = 2; // SSD's
- } // end for ever loop
- fclose(pf);
+ return;
}
+//______________________________________________________________________
+void AliITSgeom::WriteNewFile(const char *filename){
+ // Writes AliITSgeom, AliITSgeomMatrix, and the defined AliITSgeomS*D
+ // classes to a file in a format that is more readable and commendable.
+ // Inputs are:
+ // const char *filename The file name of the file to be write to.
+ // Outputs are:
+ // none
+ ofstream *fp;
+ Int_t i;
+ char *filtmp;
-//________________________________________________________________________
-AliITSgeom::AliITSgeom(AliITSgeom &source){
-////////////////////////////////////////////////////////////////////////
-// The copy constructor for the AliITSgeom class. It calls the
-// = operator function. See the = operator function for more details.
-////////////////////////////////////////////////////////////////////////
- source = *this; // Just use the = operator for now.
- return;
-}
+ filtmp = gSystem->ExpandPathName(filename);
+ cout << "AliITSgeom, Writing New .det file " << filtmp << endl;
+ fp = new ofstream(filtmp,ios::out); // open file to write
+ *fp << "//Comment lines begin with two //, one #, or one !" << endl;
+ *fp << "#Blank lines are skipped including /* and */ sections." << endl;
+ *fp << "!and, in principle the order of the lines is not important" <<endl;
+ *fp << "/* In AliITSgeom.h are defined an enumerated type called" << endl;
+ *fp << " AliITSDetectors These are kSPD=" << (Int_t) kSPD ;
+ *fp << ", kSDD=" << (Int_t) kSDD << ", kSSD=" << (Int_t) kSSD;
+ *fp << ", kSSDp=" << (Int_t) kSSDp << ", and kSDDp=" << (Int_t) kSDDp;
+ *fp << "*/" << endl;
+ *fp << "Version " << fVersion << endl;//This should be consistent with the
+ // geometry version.
+ *fp << "fTrans " << fTrans << endl;
+ *fp << "fNmodules " << fNmodules << endl;
+ *fp << "fNlayers " << fNlayers << endl;
+ *fp << "fNladers ";
+ for(i=0;i<fNlayers;i++) *fp << fNlad[i] << " ";
+ *fp << endl;
+ *fp << "fNdetectors ";
+ for(i=0;i<fNlayers;i++) *fp << fNdet[i] << " ";
+ *fp << endl;
+ *fp << "fNDetectorTypes " << fShape->GetEntriesFast() << endl;
+ for(i=0;i<fShape->GetEntriesFast();i++){
+ if(!IsShapeDefined(i)) continue; // only print out used shapes.
+ switch (i){
+ case kSPD :
+ *fp << "fShape " << (Int_t) kSPD << " ";
+ *fp << *((AliITSgeomSPD*)(fShape->At(i)));
+ break;
+ case kSDD :
+ *fp << "fShape " << (Int_t) kSDD << " ";
+ *fp << *((AliITSgeomSDD*)(fShape->At(i)));
+ break;
+ case kSSD : case kSSDp :
+ *fp << "fShape " << i << " ";
+ *fp << *((AliITSgeomSSD*)(fShape->At(i)));
+ break;
+ default:
+ Error("AliITSgeom::WriteNewFile","Unknown Shape value");
+ } // end switch (i)
+ } // end for i
+ for(i=0;i<fNmodules;i++){
+ *fp << "Matrix " << i << " ";
+ *fp << *GetGeomMatrix(i);
+ } // end for i
+ *fp << "//End of File" << endl;;
-//________________________________________________________________________
-void AliITSgeom::operator=(AliITSgeom &source){
-////////////////////////////////////////////////////////////////////////
-// The = operator function for the AliITSgeom class. It makes an
-// independent copy of the class in such a way that any changes made
-// to the copied class will not affect the source class in any way.
-// This is required for many ITS alignment studies where the copied
-// class is then modified by introducing some misalignment.
-////////////////////////////////////////////////////////////////////////
- Int_t i,j,k;
+ delete fp;
+ return;
+}
+//______________________________________________________________________
+AliITSgeom::AliITSgeom(const char *filename){
+ // The constructor for the AliITSgeom class. All of the data to fill
+ // this structure is read in from the file given my the input filename.
+ // Inputs are:
+ // const char *filename The file name of the file to be read in.
+ // Outputs are:
+ // none
+ FILE *pf=0;
+ Int_t i,lm=0,id[3];
+ Int_t l,a,d;
+ Float_t x,y,z,o,p,q,r,s,t;
+ Double_t rot6[6],tran[3];
+ char buf[200],*buff=0; // input character buffer;
+ char *filtmp;
- if(this == &source) return; // don't assign to ones self.
+ filtmp = gSystem->ExpandPathName(filename);
+ cout << "AliITSgeom reading old .det file " << filtmp << endl;
+ fShape = 0;
+ strcpy(fVersion,"DefauleV5");
+ pf = fopen(filtmp,"r");
- // if there is an old structure allocated delete it first.
- if(fg != 0){
- for(i=0;i<fNlayers;i++) delete[] fg[i];
- delete[] fg;
- } // end if fg != 0
- if(fNlad != 0) delete[] fNlad;
- if(fNdet != 0) delete[] fNdet;
+ fNlayers = 6; // set default number of ladders
+ TryAgain:
+ fNlad = new Int_t[fNlayers];
+ fNdet = new Int_t[fNlayers];
+ fNmodules = 0;
+ // find the number of ladders and detectors in this geometry.
+ for(i=0;i<fNlayers;i++){fNlad[i]=fNdet[i]=0;} // zero out arrays
+ while(fgets(buf,200,pf)!=NULL){ // for ever loop
+ for(i=0;i<200;i++)if(buf[i]!=' '){ // remove blank spaces.
+ buff = &(buf[i]);
+ break;
+ } // end for i
+ // remove blank lines and comments.
+ if(buff[0]=='\n'||buff[0]=='#'||buff[0]=='!'||
+ (buff[0]=='/'&&buff[1]=='/')) continue;
+ if(isalpha(buff[0])) { // must be the new file formated file.
+ fclose(pf);
+ delete[] fNlad;delete[] fNdet;
+ ReadNewFile(filename);
+ return;
+ } // end if isalpha(buff[0])
+ sscanf(buff,"%d %d %d %f %f %f %f %f %f %f %f %f",
+ &l,&a,&d,&x,&y,&z,&o,&p,&q,&r,&s,&t);
+ if(l>lm) lm = l;
+ if(l<1 || l>fNlayers) {
+ printf("error in file %s layer=%d min. is 1 max is %d\n",
+ filename,l,fNlayers);
+ continue;
+ }// end if l
+ fNmodules++;
+ if(l<=fNlayers&&fNlad[l-1]<a) fNlad[l-1] = a;
+ if(l<=fNlayers&&fNdet[l-1]<d) fNdet[l-1] = d;
+ } // end while ever loop
+ if(lm>fNlayers){
+ delete[] fNlad;
+ delete[] fNdet;
+ fNlayers = lm;
+ goto TryAgain;
+ } // end if lm>fNlayers
+ // counted the number of ladders and detectors now allocate space.
+ fGm = new TObjArray(fNmodules,0);
- fNlayers = source.fNlayers;
- fNlad = new Int_t[fNlayers];
- for(i=0;i<fNlayers;i++) fNlad[i] = source.fNlad[i];
- fNdet = new Int_t[fNlayers];
- for(i=0;i<fNlayers;i++) fNdet[i] = source.fNdet[i];
- fShape = new TObjArray(*(source.fShape));//This does not make a proper copy.
- fg = new ITS_geom* [fNlayers];
- for(i=0;i<fNlayers;i++){
- fg[i] = new ITS_geom[fNlad[i]*fNdet[i]];
- for(j=0;j<(fNlad[i]*fNdet[i]);j++){
- fg[i][j].fShapeIndex = source.fg[i][j].fShapeIndex;
- fg[i][j].fx0 = source.fg[i][j].fx0;
- fg[i][j].fy0 = source.fg[i][j].fy0;
- fg[i][j].fz0 = source.fg[i][j].fz0;
- fg[i][j].frx = source.fg[i][j].frx;
- fg[i][j].fry = source.fg[i][j].fry;
- fg[i][j].frz = source.fg[i][j].frz;
- for(k=0;k<9;k++) fg[i][j].fr[k] = source.fg[i][j].fr[k];
- } // end for j
- } // end for i
- return;
+ // Set up Shapes for a default configuration of 6 layers.
+ fTrans = 0; // standard GEANT global/local coordinate system.
+ // prepare to read in transforms
+ lm = 0; // reuse lm as counter of modules.
+ rewind(pf); // start over reading file
+ while(fgets(buf,200,pf)!=NULL){ // for ever loop
+ for(i=0;i<200;i++)if(buf[i]!=' '){ // remove blank spaces.
+ buff = &(buf[i]);
+ break;
+ } // end for i
+ // remove blank lines and comments.
+ if(buff[0]=='\n'||buff[0]=='#'||buff[0]=='!'||
+ (buff[0]=='/'&&buff[1]=='/')) continue;
+ x = y = z = o = p = q = r = s = t = 0.0;
+ sscanf(buff,"%d %d %d %f %f %f %f %f %f %f %f %f",
+ &l,&a,&d,&x,&y,&z,&o,&p,&q,&r,&s,&t);
+ if(l<1 || l>fNlayers) {
+ printf("error in file %s layer=%d min. is 1 max is %d/n",
+ filename,l,fNlayers);
+ continue;
+ }// end if l
+ id[0] = l;id[1] = a;id[2] = d;
+ tran[0] = tran[1] = tran[2] = 0.0;
+ tran[0] = (Double_t)x;tran[1] = (Double_t)y;tran[2] = (Double_t)z;
+ rot6[0] = rot6[1] = rot6[2] = rot6[3] = rot6[4] = rot6[5] =0.0;
+ rot6[0] = (Double_t)o;rot6[1] = (Double_t)p;rot6[2] = (Double_t)q;
+ rot6[3] = (Double_t)r;rot6[4] = (Double_t)s;rot6[5] = (Double_t)t;
+ switch (l){
+ case 1: case 2: // layer 1 or2 SPD
+ fGm->AddAt(new AliITSgeomMatrix(rot6,kSPD,id,tran),lm++);
+ break;
+ case 3: case 4: // layer 3 or 4 SDD
+ fGm->AddAt(new AliITSgeomMatrix(rot6,kSDD,id,tran),lm++);
+ break;
+ case 5: case 6: // layer 5 or 6 SSD
+ fGm->AddAt(new AliITSgeomMatrix(rot6,kSSD,id,tran),lm++);
+ break;
+ } // end switch
+ } // end while ever loop
+ fclose(pf);
}
+//______________________________________________________________________
+AliITSgeom::AliITSgeom(const AliITSgeom &source) : TObject(source){
+ // The copy constructor for the AliITSgeom class. It calls the
+ // = operator function. See the = operator function for more details.
+ // Inputs are:
+ // AliITSgeom &source The AliITSgeom class with which to make this
+ // a copy of.
+ // Outputs are:
+ // none.
-
-//________________________________________________________________________
-void AliITSgeom::GtoL(Int_t lay,Int_t lad,Int_t det,
- const Float_t *g,Float_t *l){
-////////////////////////////////////////////////////////////////////////
-// The function that does the global ALICE Cartesian coordinate
-// to local active volume detector Cartesian coordinate transformation.
-// The local detector coordinate system is determined by the layer,
-// ladder, and detector numbers. The global coordinates are entered by
-// the three element Float_t array g and the local coordinate values
-// are returned by the three element Float_t array l. The order of the
-// three elements are g[0]=x, g[1]=y, and g[2]=z, similarly for l.
-////////////////////////////////////////////////////////////////////////
- Double_t x,y,z;
- ITS_geom *gl;
-
- lay--; lad--; det--;
- gl = &(fg[lay][fNdet[lay]*lad+det]);
-
- x = g[0] - gl->fx0;
- y = g[1] - gl->fy0;
- z = g[2] - gl->fz0;
- l[0] = gl->fr[0]*x + gl->fr[1]*y + gl->fr[2]*z;
- l[1] = gl->fr[3]*x + gl->fr[4]*y + gl->fr[5]*z;
- l[2] = gl->fr[6]*x + gl->fr[7]*y + gl->fr[8]*z;
- return;
+ *this = source; // Just use the = operator for now.
+ return;
}
+//______________________________________________________________________
+AliITSgeom& AliITSgeom::operator=(const AliITSgeom &source){
+ // The = operator function for the AliITSgeom class. It makes an
+ // independent copy of the class in such a way that any changes made
+ // to the copied class will not affect the source class in any way.
+ // This is required for many ITS alignment studies where the copied
+ // class is then modified by introducing some misalignment.
+ // Inputs are:
+ // AliITSgeom &source The AliITSgeom class with which to make this
+ // a copy of.
+ // Outputs are:
+ // return *this The a new copy of source.
+ Int_t i;
-//________________________________________________________________________
-void AliITSgeom::GtoL(const Int_t *id,const Float_t *g,Float_t *l){
-////////////////////////////////////////////////////////////////////////
-// The function that does the local active volume detector Cartesian
-// coordinate to global ALICE Cartesian coordinate transformation.
-// The local detector coordinate system is determined by the layer,
-// ladder, and detector numbers. The local coordinates are entered by
-// the three element Float_t array l and the global coordinate values
-// are returned by the three element Float_t array g. The order of the
-// three elements are l[0]=x, l[1]=y, and l[2]=z, similarly for g.
-////////////////////////////////////////////////////////////////////////
- Int_t lay,lad,det;
- Double_t x,y,z;
- ITS_geom *gl;
-
- lay = id[0]; lad = id[1]; det = id[2];
- lay--; lad--; det--;
- gl = &(fg[lay][fNdet[lay]*lad+det]);
-
- x = g[0] - gl->fx0;
- y = g[1] - gl->fy0;
- z = g[2] - gl->fz0;
- l[0] = gl->fr[0]*x + gl->fr[1]*y + gl->fr[2]*z;
- l[1] = gl->fr[3]*x + gl->fr[4]*y + gl->fr[5]*z;
- l[2] = gl->fr[6]*x + gl->fr[7]*y + gl->fr[8]*z;
- return;
-}
-//________________________________________________________________________
-void AliITSgeom::GtoL(Int_t index,const Float_t *g,Float_t *l){
-////////////////////////////////////////////////////////////////////////
-// The function that does the local active volume detector Cartesian
-// coordinate to global ALICE Cartesian coordinate transformation.
-// The local detector coordinate system is determined by the detector
-// index numbers (see GetModuleIndex and GetModuleID). The local
-// coordinates are entered by the three element Float_t array l and the
-// global coordinate values are returned by the three element Float_t array g.
-// The order of the three elements are l[0]=x, l[1]=y, and l[2]=z, similarly
-// for g.
-////////////////////////////////////////////////////////////////////////
- Int_t lay,lad,det;
- Double_t x,y,z;
- ITS_geom *gl;
-
- this->GetModuleId(index,lay,lad,det);
- lay--; lad--; det--;
- gl = &(fg[lay][fNdet[lay]*lad+det]);
-
- x = g[0] - gl->fx0;
- y = g[1] - gl->fy0;
- z = g[2] - gl->fz0;
- l[0] = gl->fr[0]*x + gl->fr[1]*y + gl->fr[2]*z;
- l[1] = gl->fr[3]*x + gl->fr[4]*y + gl->fr[5]*z;
- l[2] = gl->fr[6]*x + gl->fr[7]*y + gl->fr[8]*z;
- return;
-}
+ if(this == &source) return *this; // don't assign to ones self.
-//________________________________________________________________________
-void AliITSgeom::LtoG(Int_t lay,Int_t lad,Int_t det,
- const Float_t *l,Float_t *g){
-////////////////////////////////////////////////////////////////////////
-// The function that does the local active volume detector Cartesian
-// coordinate to global ALICE Cartesian coordinate transformation.
-// The local detector coordinate system is determined by the layer,
-// ladder, and detector numbers. The local coordinates are entered by
-// the three element Float_t array l and the global coordinate values
-// are returned by the three element Float_t array g. The order of the
-// three elements are l[0]=x, l[1]=y, and l[2]=z, similarly for g.
-////////////////////////////////////////////////////////////////////////
- Double_t x,y,z;
- ITS_geom *gl;
-
- lay--; lad--; det--;
- gl = &(fg[lay][fNdet[lay]*lad+det]);
-
- x = gl->fr[0]*l[0] + gl->fr[3]*l[1] + gl->fr[6]*l[2];
- y = gl->fr[1]*l[0] + gl->fr[4]*l[1] + gl->fr[7]*l[2];
- z = gl->fr[2]*l[0] + gl->fr[5]*l[1] + gl->fr[8]*l[2];
- g[0] = x + gl->fx0;
- g[1] = y + gl->fy0;
- g[2] = z + gl->fz0;
- return;
-}
+ // if there is an old structure allocated delete it first.
+ if(this->fGm != 0){
+ for(i=0;i<this->fNmodules;i++) delete this->fGm->At(i);
+ delete this->fGm;
+ } // end if fGm != 0
+ if(fNlad != 0) delete[] fNlad;
+ if(fNdet != 0) delete[] fNdet;
-//________________________________________________________________________
-void AliITSgeom::LtoG(const Int_t *id,const Float_t *l,Float_t *g){
-////////////////////////////////////////////////////////////////////////
-// The function that does the local active volume detector Cartesian
-// coordinate to global ALICE Cartesian coordinate transformation.
-// The local detector coordinate system is determined by the three
-// element array Id containing as it's three elements Id[0]=layer,
-// Id[1]=ladder, and Id[2]=detector numbers. The local coordinates
-// are entered by the three element Float_t array l and the global
-// coordinate values are returned by the three element Float_t array g.
-// The order of the three elements are l[0]=x, l[1]=y, and l[2]=z,
-// similarly for g.
-////////////////////////////////////////////////////////////////////////
- Int_t lay,lad,det;
- Double_t x,y,z;
- ITS_geom *gl;
-
- lay = id[0]; lad = id[1]; det = id[2];
- lay--; lad--; det--;
- gl = &(fg[lay][fNdet[lay]*lad+det]);
-
- x = gl->fr[0]*l[0] + gl->fr[3]*l[1] + gl->fr[6]*l[2];
- y = gl->fr[1]*l[0] + gl->fr[4]*l[1] + gl->fr[7]*l[2];
- z = gl->fr[2]*l[0] + gl->fr[5]*l[1] + gl->fr[8]*l[2];
- g[0] = x + gl->fx0;
- g[1] = y + gl->fy0;
- g[2] = z + gl->fz0;
- return;
-}
-//________________________________________________________________________
-void AliITSgeom::LtoG(Int_t index,const Float_t *l,Float_t *g){
-////////////////////////////////////////////////////////////////////////
-// The function that does the local active volume detector Cartesian
-// coordinate to global ALICE Cartesian coordinate transformation.
-// The local detector coordinate system is determined by the detector
-// index number (see GetModuleIndex and GetModuleId). The local coordinates
-// are entered by the three element Float_t array l and the global
-// coordinate values are returned by the three element Float_t array g.
-// The order of the three elements are l[0]=x, l[1]=y, and l[2]=z,
-// similarly for g.
-////////////////////////////////////////////////////////////////////////
- Int_t lay,lad,det;
- Double_t x,y,z;
- ITS_geom *gl;
-
- this->GetModuleId(index,lay,lad,det);
- lay--; lad--; det--;
- gl = &(fg[lay][fNdet[lay]*lad+det]);
-
- x = gl->fr[0]*l[0] + gl->fr[3]*l[1] + gl->fr[6]*l[2];
- y = gl->fr[1]*l[0] + gl->fr[4]*l[1] + gl->fr[7]*l[2];
- z = gl->fr[2]*l[0] + gl->fr[5]*l[1] + gl->fr[8]*l[2];
- g[0] = x + gl->fx0;
- g[1] = y + gl->fy0;
- g[2] = z + gl->fz0;
- return;
-}
-//________________________________________________________________________
-void AliITSgeom::GtoLMomentum(Int_t lay,Int_t lad,Int_t det,
- const Float_t *g,Float_t *l){
-////////////////////////////////////////////////////////////////////////
-// The function that does the global ALICE Cartesian momentum
-// to local active volume detector Cartesian momentum transformation.
-// The local detector coordinate system is determined by the layer,
-// ladder, and detector numbers. The global momentums are entered by
-// the three element Float_t array g and the local momentums values
-// are returned by the three element Float_t array l. The order of the
-// three elements are g[0]=x, g[1]=y, and g[2]=z, similarly for l.
-////////////////////////////////////////////////////////////////////////
- Double_t px,py,pz;
- ITS_geom *gl;
-
- lay--; lad--; det--;
- gl = &(fg[lay][fNdet[lay]*lad+det]);
-
- px = g[0];
- py = g[1];
- pz = g[2];
- l[0] = gl->fr[0]*px + gl->fr[1]*py + gl->fr[2]*pz;
- l[1] = gl->fr[3]*px + gl->fr[4]*py + gl->fr[5]*pz;
- l[2] = gl->fr[6]*px + gl->fr[7]*py + gl->fr[8]*pz;
- return;
-}
-//________________________________________________________________________
-void AliITSgeom::LtoGMomentum(Int_t lay,Int_t lad,Int_t det,
- const Float_t *l,Float_t *g){
-////////////////////////////////////////////////////////////////////////
-// The function that does the local active volume detector Cartesian
-// momentum to global ALICE Cartesian momentum transformation.
-// The local detector momentum system is determined by the layer,
-// ladder, and detector numbers. The locall momentums are entered by
-// the three element Float_t array l and the global momentum values
-// are returned by the three element Float_t array g. The order of the
-// three elements are l[0]=x, l[1]=y, and l[2]=z, similarly for g.
-////////////////////////////////////////////////////////////////////////
- Double_t px,py,pz;
- ITS_geom *gl;
-
- lay--; lad--; det--;
- gl = &(fg[lay][fNdet[lay]*lad+det]);
-
- px = gl->fr[0]*l[0] + gl->fr[3]*l[1] + gl->fr[6]*l[2];
- py = gl->fr[1]*l[0] + gl->fr[4]*l[1] + gl->fr[7]*l[2];
- pz = gl->fr[2]*l[0] + gl->fr[5]*l[1] + gl->fr[8]*l[2];
- g[0] = px;
- g[1] = py;
- g[2] = pz;
- return;
+ this->fTrans = source.fTrans;
+ this->fNmodules = source.fNmodules;
+ this->fNlayers = source.fNlayers;
+ this->fNlad = new Int_t[fNlayers];
+ for(i=0;i<this->fNlayers;i++) this->fNlad[i] = source.fNlad[i];
+ this->fNdet = new Int_t[fNlayers];
+ for(i=0;i<this->fNlayers;i++) this->fNdet[i] = source.fNdet[i];
+ this->fShape = new TObjArray(*(source.fShape));//This does not make a proper copy.
+ this->fGm = new TObjArray(this->fNmodules,0);
+ for(i=0;i<this->fNmodules;i++){
+ this->fGm->AddAt(new AliITSgeomMatrix(*(
+ (AliITSgeomMatrix*)(source.fGm->At(i)))),i);
+ } // end for i
+ return *this;
}
-//___________________________________________________________________________
+//______________________________________________________________________
Int_t AliITSgeom::GetModuleIndex(Int_t lay,Int_t lad,Int_t det){
- Int_t i,j,k;
+ // This routine computes the module index number from the layer,
+ // ladder, and detector numbers. The number of ladders and detectors
+ // per layer is determined when this geometry package is constructed,
+ // see AliITSgeom(const char *filename) for specifics.
+ // Inputs are:
+ // Int_t lay The layer number. Starting from 1.
+ // Int_t lad The ladder number. Starting from 1.
+ // Int_t det The detector number. Starting from 1.
+ // Outputs are:
+ // return the module index number, starting from zero.
+ Int_t i,j,k,id[3];
i = fNdet[lay-1] * (lad-1) + det - 1;
j = 0;
for(k=0;k<lay-1;k++) j += fNdet[k]*fNlad[k];
- return (i+j);
+ i = i+j;
+ if(i>=fNmodules) return -1;
+ GetGeomMatrix(i)->GetIndex(id);
+ if(id[0]==lay&&id[1]==lad&&id[2]==det) return i;
+ // Array of modules fGm is not in expected order. Search for this index
+ for(i=0;i<fNmodules;i++){
+ GetGeomMatrix(i)->GetIndex(id);
+ if(id[0]==lay&&id[1]==lad&&id[2]==det) return i;
+ } // end for i
+ // This layer ladder and detector combination does not exist return -1.
+ return -1;
}
-//___________________________________________________________________________
+//______________________________________________________________________
void AliITSgeom::GetModuleId(Int_t index,Int_t &lay,Int_t &lad,Int_t &det){
- Int_t i,j,k;
+ // This routine computes the layer, ladder and detector number
+ // given the module index number. The number of ladders and detectors
+ // per layer is determined when this geometry package is constructed,
+ // see AliITSgeom(const char *filename) for specifics.
+ // Inputs are:
+ // Int_t index The module index number, starting from zero.
+ // Outputs are:
+ // Int_t lay The layer number. Starting from 1.
+ // Int_t lad The ladder number. Starting from 1.
+ // Int_t det The detector number. Starting from 1.
+ Int_t id[3];
+ AliITSgeomMatrix *g = GetGeomMatrix(index);
+ if (g == 0x0)
+ {
+ Error("GetModuleId","Can not get GeoMatrix for index = %d",index);
+ lay = -1; lad = -1; det = -1;
+ }
+ else
+ {
+ g->GetIndex(id);
+ lay = id[0]; lad = id[1]; det = id[2];
+ }
+ return;
+ // The old way kept for posterity.
+/*
+ Int_t i,j,k;
j = 0;
for(k=0;k<fNlayers;k++){
j += fNdet[k]*fNlad[k];
- if(index>j)break;
+ if(j>index)break;
} // end for k
lay = k+1;
i = index -j + fNdet[k]*fNlad[k];
j = 0;
for(k=0;k<fNlad[lay-1];k++){
- j += fNdet[k];
- if(i>fNdet[k])break;
+ j += fNdet[lay-1];
+ if(j>i)break;
} // end for k
lad = k+1;
det = 1+i-fNdet[lay-1]*k;
return;
+*/
}
-//___________________________________________________________________________
-void AliITSgeom::GlobalChange(Float_t *tran,Float_t *rot){
-////////////////////////////////////////////////////////////////////////
-// This function performs a Cartesian translation and rotation of
-// the full ITS from its default position by an amount determined by
-// the three element arrays dtranslation and drotation. If every element
-// of dtranslation and drotation are zero then there is no change made
-// the geometry. The change is global in that the exact same translation
-// and rotation is done to every detector element in the exact same way.
-// The units of the translation are those of the Monte Carlo, usually cm,
-// and those of the rotation are in radians. The elements of dtranslation
-// are dtranslation[0] = x, dtranslation[1] = y, and dtranslation[2] = z.
-// The elements of drotation are drotation[0] = rx, drotation[1] = ry, and
-// drotation[2] = rz. A change in x will move the hole ITS in the ALICE
-// global x direction, the same for a change in y. A change in z will
-// result in a translation of the ITS as a hole up or down the beam line.
-// A change in the angles will result in the inclination of the ITS with
-// respect to the beam line, except for an effective rotation about the
-// beam axis which will just rotate the ITS as a hole about the beam axis.
-////////////////////////////////////////////////////////////////////////
- Int_t i,j,k,l;
- Double_t rx,ry,rz;
- Double_t sx,cx,sy,cy,sz,cz;
- ITS_geom *gl;
-
- for(i=0;i<fNlayers;i++){
- for(j=0;j<fNlad[i];j++) for(k=0;k<fNdet[i];k++){
- l = fNdet[i]*j+k; // resolved index
- gl = &(fg[i][l]);
- gl->fx0 += tran[0];
- gl->fy0 += tran[1];
- gl->fz0 += tran[2];
- gl->frx += rot[0];
- gl->fry += rot[1];
- gl->frz += rot[2];
- rx = gl->frx; ry = gl->fry; rz = gl->frz;
- sx = sin(rx); cx = cos(rx);
- sy = sin(ry); cy = cos(ry);
- sz = sin(rz); cz = cos(rz);
- gl->fr[0] = cz*cy;
- gl->fr[1] = -cz*sy*sx - sz*cx;
- gl->fr[2] = -cz*sy*cx + sz*sx;
- gl->fr[3] = sz*cy;
- gl->fr[4] = -sz*sy*sx + cz*cx;
- gl->fr[5] = -sz*sy*cx - cz*sx;
- gl->fr[6] = sy;
- gl->fr[7] = cy*sx;
- gl->fr[8] = cy*cx;
- } // end for j,k
- } // end for i
- return;
+//______________________________________________________________________
+Int_t AliITSgeom::GetStartDet(Int_t dtype){
+ // returns the starting module index value for a give type of detector id.
+ // This assumes that the detector types are different on different layers
+ // and that they are not mixed up.
+ // Inputs are:
+ // Int_t dtype A detector type number. 0 for SPD, 1 for SDD, and 2 for SSD.
+ // outputs:
+ // return the module index for the first occurance of that detector type.
+
+ switch(dtype){
+ case 0:
+ return GetModuleIndex(1,1,1);
+ break;
+ case 1:
+ return GetModuleIndex(3,1,1);
+ break;
+ case 2:
+ return GetModuleIndex(5,1,1);
+ break;
+ default:
+ Warning("GetStartDet","undefined detector type %d",dtype);
+ return 0;
+ } // end switch
+
+ Warning("GetStartDet","undefined detector type %d",dtype);
+ return 0;
}
+//______________________________________________________________________
+Int_t AliITSgeom::GetLastDet(Int_t dtype){
+ // returns the last module index value for a give type of detector id.
+ // This assumes that the detector types are different on different layers
+ // and that they are not mixed up.
+ // Inputs are:
+ // Int_t dtype A detector type number. 0 for SPD, 1 for SDD, and 2 for SSD.
+ // outputs are:
+ // return the module index for the last occurance of that detector type.
-//___________________________________________________________________________
-void AliITSgeom::GlobalCylindericalChange(Float_t *tran,Float_t *rot){
-////////////////////////////////////////////////////////////////////////
-// This function performs a cylindrical translation and rotation of
-// each ITS element by a fixed about in radius, rphi, and z from its
-// default position by an amount determined by the three element arrays
-// dtranslation and drotation. If every element of dtranslation and
-// drotation are zero then there is no change made the geometry. The
-// change is global in that the exact same distance change in translation
-// and rotation is done to every detector element in the exact same way.
-// The units of the translation are those of the Monte Carlo, usually cm,
-// and those of the rotation are in radians. The elements of dtranslation
-// are dtranslation[0] = r, dtranslation[1] = rphi, and dtranslation[2] = z.
-// The elements of drotation are drotation[0] = rx, drotation[1] = ry, and
-// drotation[2] = rz. A change in r will results in the increase of the
-// radius of each layer by the same about. A change in rphi will results in
-// the rotation of each layer by a different angle but by the same
-// circumferential distance. A change in z will result in a translation
-// of the ITS as a hole up or down the beam line. A change in the angles
-// will result in the inclination of the ITS with respect to the beam
-// line, except for an effective rotation about the beam axis which will
-// just rotate the ITS as a hole about the beam axis.
-////////////////////////////////////////////////////////////////////////
- Int_t i,j,k,l;
- Double_t rx,ry,rz,r,phi,rphi; // phi in radians
- Double_t sx,cx,sy,cy,sz,cz,r0;
- ITS_geom *gl;
-
-// printf("trans=%f %f %f rot=%f %f %f\n",tran[0],tran[1],tran[2],
-// rot[0],rot[1],rot[2]);
- for(i=0;i<fNlayers;i++){
- for(j=0;j<fNlad[i];j++) for(k=0;k<fNdet[i];k++){
- l = fNdet[i]*j+k; // resolved index
- gl = &(fg[i][l]);
- r = r0= TMath::Hypot(gl->fy0,gl->fx0);
- phi = atan2(gl->fy0,gl->fx0);
- rphi = r0*phi;
- r += tran[0];
- rphi += tran[1];
- phi = rphi/r0;
- gl->fx0 = r*TMath::Cos(phi);
- gl->fy0 = r*TMath::Sin(phi);
- gl->fz0 += tran[2];
- gl->frx += rot[0];
- gl->fry += rot[1];
- gl->frz += rot[2];
- rx = gl->frx; ry = gl->fry; rz = gl->frz;
- sx = sin(rx); cx = cos(rx);
- sy = sin(ry); cy = cos(ry);
- sz = sin(rz); cz = cos(rz);
- gl->fr[0] = cz*cy;
- gl->fr[1] = -cz*sy*sx - sz*cx;
- gl->fr[2] = -cz*sy*cx + sz*sx;
- gl->fr[3] = sz*cy;
- gl->fr[4] = -sz*sy*sx + cz*cx;
- gl->fr[5] = -sz*sy*cx - cz*sx;
- gl->fr[6] = sy;
- gl->fr[7] = cy*sx;
- gl->fr[8] = cy*cx;
- } // end for j,k
- } // end for i
- return;
+ switch(dtype){
+ case 0:
+ return GetLastSPD();
+ break;
+ case 1:
+ return GetLastSDD();
+ break;
+ case 2:
+ return GetLastSSD();
+ break;
+ default:
+ Warning("GetLastDet","undefined detector type %d",dtype);
+ return 0;
+ } // end switch
+
+ Warning("GetLastDet","undefined detector type %d",dtype);
+ return 0;
}
+//______________________________________________________________________
+void AliITSgeom::PrintComparison(FILE *fp,AliITSgeom *other){
+ // This function was primarily created for diagnostic reasons. It
+ // print to a file pointed to by the file pointer fp the difference
+ // between two AliITSgeom classes. The format of the file is basicly,
+ // define d? to be the difference between the same element of the two
+ // classes. For example dfrx = this->GetGeomMatrix(i)->frx
+ // - other->GetGeomMatrix(i)->frx.
+ // if(at least one of dfx0, dfy0, dfz0,dfrx,dfry,dfrz are non zero) then
+ // print layer ladder detector dfx0 dfy0 dfz0 dfrx dfry dfrz
+ // if(at least one of the 9 elements of dfr[] are non zero) then print
+ // layer ladder detector dfr[0] dfr[1] dfr[2]
+ // dfr[3] dfr[4] dfr[5]
+ // dfr[6] dfr[7] dfr[8]
+ // Only non zero values are printed to save space. The differences are
+ // typical written to a file because there are usually a lot of numbers
+ // printed out and it is usually easier to read them in some nice editor
+ // rather than zooming quickly past you on a screen. fprintf is used to
+ // do the printing. The fShapeIndex difference is not printed at this time.
+ // Inputs are:
+ // FILE *fp A file pointer to an opened file for writing in which
+ // the results of the comparison will be written.
+ // AliITSgeom *other The other AliITSgeom class to which this one is
+ // being compared.
+ // outputs are:
+ // none
+ Int_t i,j,idt[3],ido[3];
+ Double_t tt[3],to[3]; // translation
+ Double_t rt[3],ro[3]; // phi in radians
+ Double_t mt[3][3],mo[3][3]; // matrixes
+ AliITSgeomMatrix *gt,*go;
+ Bool_t t;
-//___________________________________________________________________________
-void AliITSgeom::RandomChange(Float_t *stran,Float_t *srot){
-////////////////////////////////////////////////////////////////////////
-// This function performs a Gaussian random displacement and/or
-// rotation about the present global position of each active
-// volume/detector of the ITS. The sigma of the random displacement
-// is determined by the three element array stranslation, for the
-// x y and z translations, and the three element array srotation,
-// for the three rotation about the axis x y and z.
-////////////////////////////////////////////////////////////////////////
- Int_t i,j,k,l;
- Double_t rx,ry,rz;
- Double_t sx,cx,sy,cy,sz,cz;
- TRandom ran;
- ITS_geom *gl;
-
- for(i=0;i<fNlayers;i++){
- for(j=0;j<fNlad[i];j++) for(k=0;k<fNdet[i];k++){
- l = fNdet[i]*j+k; // resolved index
- gl = &(fg[i][l]);
- gl->fx0 += ran.Gaus(0.0,stran[0]);
- gl->fy0 += ran.Gaus(0.0,stran[1]);
- gl->fz0 += ran.Gaus(0.0,stran[2]);
- gl->frx += ran.Gaus(0.0, srot[0]);
- gl->fry += ran.Gaus(0.0, srot[1]);
- gl->frz += ran.Gaus(0.0, srot[2]);
- rx = gl->frx; ry = gl->fry; rz = gl->frz;
- sx = sin(rx); cx = cos(rx);
- sy = sin(ry); cy = cos(ry);
- sz = sin(rz); cz = cos(rz);
- gl->fr[0] = cz*cy;
- gl->fr[1] = -cz*sy*sx - sz*cx;
- gl->fr[2] = -cz*sy*cx + sz*sx;
- gl->fr[3] = sz*cy;
- gl->fr[4] = -sz*sy*sx + cz*cx;
- gl->fr[5] = -sz*sy*cx - cz*sx;
- gl->fr[6] = sy;
- gl->fr[7] = cy*sx;
- gl->fr[8] = cy*cx;
- } // end for j,k
- } // end for i
- return;
+ for(i=0;i<this->fNmodules;i++){
+ gt = this->GetGeomMatrix(i);
+ go = other->GetGeomMatrix(i);
+ gt->GetIndex(idt);
+ go->GetIndex(ido);
+ t = kFALSE;
+ for(i=0;i<3;i++) t = t&&idt[i]!=ido[i];
+ if(t) fprintf(fp,"%4.4d %1.1d %2.2d %2.2d %1.1d %2.2d %2.2d\n",i,
+ idt[0],idt[1],idt[2],ido[0],ido[1],ido[2]);
+ gt->GetTranslation(tt);
+ go->GetTranslation(to);
+ gt->GetAngles(rt);
+ go->GetAngles(ro);
+ t = kFALSE;
+ for(i=0;i<3;i++) t = t&&tt[i]!=to[i];
+ if(t) fprintf(fp,"%1.1d %2.2d %2.2d dTrans=%f %f %f drot=%f %f %f\n",
+ idt[0],idt[1],idt[2],
+ tt[0]-to[0],tt[1]-to[1],tt[2]-to[2],
+ rt[0]-ro[0],rt[1]-ro[1],rt[2]-ro[2]);
+ t = kFALSE;
+ gt->GetMatrix(mt);
+ go->GetMatrix(mo);
+ for(i=0;i<3;i++)for(j=0;j<3;j++) t = mt[i][j] != mo[i][j];
+ if(t){
+ fprintf(fp,"%1.1d %2.2d %2.2d dfr= %e %e %e\n",
+ idt[0],idt[1],idt[2],
+ mt[0][0]-mo[0][0],mt[0][1]-mo[0][1],mt[0][2]-mo[0][2]);
+ fprintf(fp," dfr= %e %e %e\n",
+ mt[1][0]-mo[1][0],mt[1][1]-mo[1][1],mt[1][2]-mo[1][2]);
+ fprintf(fp," dfr= %e %e %e\n",
+ mt[2][0]-mo[2][0],mt[2][1]-mo[2][1],mt[2][2]-mo[2][2]);
+ } // end if t
+ } // end for i
+ return;
}
+//______________________________________________________________________
+void AliITSgeom::PrintData(FILE *fp,Int_t lay,Int_t lad,Int_t det){
+ // This function prints out the coordinate transformations for
+ // the particular detector defined by layer, ladder, and detector
+ // to the file pointed to by the File pointer fp. fprintf statements
+ // are used to print out the numbers. The format is
+ // layer ladder detector Trans= fx0 fy0 fz0 rot= frx fry frz
+ // Shape=fShapeIndex
+ // dfr= fr[0] fr[1] fr[2]
+ // dfr= fr[3] fr[4] fr[5]
+ // dfr= fr[6] fr[7] fr[8]
+ // By indicating which detector, some control over the information
+ // is given to the user. The output it written to the file pointed
+ // to by the file pointer fp. This can be set to stdout if you want.
+ // Inputs are:
+ // FILE *fp A file pointer to an opened file for writing in which
+ // the results of the comparison will be written.
+ // Int_t lay The layer number. Starting from 1.
+ // Int_t lad The ladder number. Starting from 1.
+ // Int_t det The detector number. Starting from 1.
+ // outputs are:
+ // none
+ AliITSgeomMatrix *gt;
+ Double_t t[3],r[3],m[3][3];
-//___________________________________________________________________________
-void AliITSgeom::RandomCylindericalChange(Float_t *stran,Float_t *srot){
-////////////////////////////////////////////////////////////////////////
-// This function performs a Gaussian random displacement and/or
-// rotation about the present global position of each active
-// volume/detector of the ITS. The sigma of the random displacement
-// is determined by the three element array stranslation, for the
-// r rphi and z translations, and the three element array srotation,
-// for the three rotation about the axis x y and z. This random change
-// in detector position allow for the simulation of a random uncertainty
-// in the detector positions of the ITS.
-////////////////////////////////////////////////////////////////////////
- Int_t i,j,k,l;
- Double_t rx,ry,rz,r,phi,x,y; // phi in radians
- Double_t sx,cx,sy,cy,sz,cz,r0;
- TRandom ran;
- ITS_geom *gl;
-
-// printf("trans=%f %f %f rot=%f %f %f\n",stran[0],stran[1],stran[2],
-// srot[0],srot[1],srot[2]);
- for(i=0;i<fNlayers;i++){
- for(j=0;j<fNlad[i];j++) for(k=0;k<fNdet[i];k++){
- l = fNdet[i]*j+k; // resolved index
- gl = &(fg[i][l]);
- x = gl->fx0;
- y = gl->fy0;
- r = r0= TMath::Hypot(y,x);
- phi = TMath::ATan2(y,x);
-// if(phi<0.0) phi += 2.0*TMath::Pi();
- r += ran.Gaus(0.0,stran[0]);
- phi += ran.Gaus(0.0,stran[1])/r0;
-// printf("fx0=%f fy0=%f rcos(phi)=%f rsin(phi)=%f\n",gl->fx0,gl->fy0,
-// r*TMath::Cos(phi),r*TMath::Sin(phi));
- gl->fx0 = r*TMath::Cos(phi);
- gl->fy0 = r*TMath::Sin(phi);
-// printf("r0=%f r=%f hypot=%f phi0=%f phi=%f ATan2=%f\n",
-// r0,r,TMath::Hypot(gl->fy0,gl->fx0),
-// phi0,phi,TMath::ATan2(gl->fy0,gl->fx0));
- gl->fz0 += ran.Gaus(0.0,stran[2]);
- gl->frx += ran.Gaus(0.0, srot[0]);
- gl->fry += ran.Gaus(0.0, srot[1]);
- gl->frz += ran.Gaus(0.0, srot[2]);
- rx = gl->frx; ry = gl->fry; rz = gl->frz;
- sx = sin(rx); cx = cos(rx);
- sy = sin(ry); cy = cos(ry);
- sz = sin(rz); cz = cos(rz);
- gl->fr[0] = cz*cy;
- gl->fr[1] = -cz*sy*sx - sz*cx;
- gl->fr[2] = -cz*sy*cx + sz*sx;
- gl->fr[3] = sz*cy;
- gl->fr[4] = -sz*sy*sx + cz*cx;
- gl->fr[5] = -sz*sy*cx - cz*sx;
- gl->fr[6] = sy;
- gl->fr[7] = cy*sx;
- gl->fr[8] = cy*cx;
- } // end for j,k
- } // end for i
- return;
+ gt = this->GetGeomMatrix(GetModuleIndex(lay,lad,det));
+ gt->GetTranslation(t);
+ gt->GetAngles(r);
+ fprintf(fp,"%1.1d %2.2d %2.2d Trans=%f %f %f rot=%f %f %f Shape=%d\n",
+ lay,lad,det,t[0],t[1],t[2],r[0],r[1],r[2],
+ gt->GetDetectorIndex());
+ gt->GetMatrix(m);
+ fprintf(fp," dfr= %e %e %e\n",m[0][0],m[0][1],m[0][2]);
+ fprintf(fp," dfr= %e %e %e\n",m[1][0],m[1][1],m[1][2]);
+ fprintf(fp," dfr= %e %e %e\n",m[2][0],m[2][1],m[2][2]);
+ return;
}
+//______________________________________________________________________
+ofstream & AliITSgeom::PrintGeom(ofstream &rb){
+ // Stream out an object of class AliITSgeom to standard output.
+ // Intputs are:
+ // ofstream &rb The output streaming buffer.
+ // Outputs are:
+ // ofstream &rb The output streaming buffer.
+ Int_t i;
-//___________________________________________________________________________
-void AliITSgeom::SetByAngles(Int_t lay,Int_t lad,Int_t det,
- Float_t rx,Float_t ry,Float_t rz){
-////////////////////////////////////////////////////////////////////////
-// This function computes a new rotation matrix based on the angles
-// rx, ry, and rz (in radians) for a give detector on the give ladder
-// in the give layer. A new
-// fg[layer-1][(fNlad[layer-1]*(ladder-1)+detector-1)].fr[] array is
-// computed.
-////////////////////////////////////////////////////////////////////////
- ITS_geom *g;
- Double_t sx,cx,sy,cy,sz,cz;
-
- lay--; lad--; det--; // set to zero base now.
- g = &(fg[lay][fNdet[lay]*lad+det]);
-
- sx = sin(rx); cx = cos(rx);
- sy = sin(ry); cy = cos(ry);
- sz = sin(rz); cz = cos(rz);
- g->frx = rx;
- g->fry = ry;
- g->frz = rz;
- g->fr[0] = cz*cy;
- g->fr[1] = -cz*sy*sx - sz*cx;
- g->fr[2] = -cz*sy*cx + sz*sx;
- g->fr[3] = sz*cy;
- g->fr[4] = -sz*sy*sx + cz*cx;
- g->fr[5] = -sz*sy*cx - cz*sx;
- g->fr[6] = sy;
- g->fr[7] = cy*sx;
- g->fr[8] = cy*cx;
- return;
+ rb.setf(ios::scientific);
+ rb << fTrans << " ";
+ rb << fNmodules << " ";
+ rb << fNlayers << " ";
+ for(i=0;i<fNlayers;i++) rb << fNlad[i] << " ";
+ for(i=0;i<fNlayers;i++) rb << fNdet[i] << "\n";
+ for(i=0;i<fNmodules;i++) {
+ rb <<setprecision(16) << *(GetGeomMatrix(i)) << "\n";
+ } // end for i
+ rb << fShape->GetEntries()<<endl;
+ for(i=0;i<fShape->GetEntries();i++) if(fShape->At(i)!=0) switch (i){
+ case kSPD:
+ rb << kSPD <<","<< (AliITSgeomSPD*)(fShape->At(kSPD));
+ break;
+ case kSDD:
+ rb << kSDD <<","<< (AliITSgeomSDD*)(fShape->At(kSDD));
+ break;
+ case kSSD:
+ rb << kSSD <<","<< (AliITSgeomSSD*)(fShape->At(kSSD));
+ break;
+ case kSSDp:
+ rb << kSSDp <<","<< (AliITSgeomSSD*)(fShape->At(kSSDp));
+ break;
+ case kSDDp:
+ rb << kSDDp <<","<< (AliITSgeomSDD*)(fShape->At(kSDDp));
+ break;
+ } // end for i / switch
+ return rb;
}
+//______________________________________________________________________
+ifstream & AliITSgeom::ReadGeom(ifstream &rb){
+ // Stream in an object of class AliITSgeom from standard input.
+ // Intputs are:
+ // ifstream &rb The input streaming buffer.
+ // Outputs are:
+ // ifstream &rb The input streaming buffer.
+ Int_t i,j;
-//___________________________________________________________________________
-void AliITSgeom::GetRotMatrix(Int_t lay,Int_t lad,Int_t det,Float_t *mat){
-////////////////////////////////////////////////////////////////////////
-// Returns, in the Float_t array pointed to by mat, the full rotation
-// matrix for the give detector defined by layer, ladder, and detector.
-// It returns all nine elements of fr in the ITS_geom structure. See the
-// description of the ITS_geom structure for further details of this
-// rotation matrix.
-////////////////////////////////////////////////////////////////////////
- Int_t i;
- ITS_geom *g;
+ fNlad = new Int_t[fNlayers];
+ fNdet = new Int_t[fNlayers];
+ if(fGm!=0){
+ for(i=0;i<fNmodules;i++) delete GetGeomMatrix(i);
+ delete fGm;
+ } // end if fGm!=0
- lay--; lad--; det--; // shift to base 0
- g = &(fg[lay][fNdet[lay]*lad+det]);
- for(i=0;i<9;i++) mat[i] = g->fr[i];
- return;
+ rb >> fTrans >> fNmodules >> fNlayers;
+ fNlad = new Int_t[fNlayers];
+ fNdet = new Int_t[fNlayers];
+ for(i=0;i<fNlayers;i++) rb >> fNlad[i];
+ for(i=0;i<fNlayers;i++) rb >> fNdet[i];
+ fGm = new TObjArray(fNmodules,0);
+ for(i=0;i<fNmodules;i++){
+ fGm->AddAt(new AliITSgeomMatrix,i);
+ rb >> *(GetGeomMatrix(i));
+ } // end for i
+ rb >> i;
+ fShape = new TObjArray(i);
+ for(i=0;i<fShape->GetEntries();i++) {
+ rb >> j;
+ switch (j){
+ case kSPD:{
+ AliITSgeomSPD *s = new AliITSgeomSPD();
+ rb >> *s;
+ fShape->AddAt(s,kSPD);}
+ break;
+ case kSDD:{
+ AliITSgeomSDD *s = new AliITSgeomSDD();
+ rb >> *s;
+ fShape->AddAt(s,kSDD);}
+ break;
+ case kSSD:{
+ AliITSgeomSSD *s = new AliITSgeomSSD();
+ rb >> *s;
+ fShape->AddAt(s,kSSD);}
+ break;
+ case kSSDp:{
+ AliITSgeomSSD *s = new AliITSgeomSSD();
+ rb >> *s;
+ fShape->AddAt(s,kSSDp);}
+ break;
+ case kSDDp:{
+ AliITSgeomSDD *s = new AliITSgeomSDD();
+ rb >> *s;
+ fShape->AddAt(s,kSDDp);}
+ break;
+ } // end switch
+ } // end for i
+ return rb;
}
+//______________________________________________________________________
+// The following routines modify the transformation of "this"
+// geometry transformations in a number of different ways.
+//______________________________________________________________________
+void AliITSgeom::GlobalChange(const Float_t *tran,const Float_t *rot){
+ // This function performs a Cartesian translation and rotation of
+ // the full ITS from its default position by an amount determined by
+ // the three element arrays tran and rot. If every element
+ // of tran and rot are zero then there is no change made
+ // the geometry. The change is global in that the exact same translation
+ // and rotation is done to every detector element in the exact same way.
+ // The units of the translation are those of the Monte Carlo, usually cm,
+ // and those of the rotation are in radians. The elements of tran
+ // are tran[0] = x, tran[1] = y, and tran[2] = z.
+ // The elements of rot are rot[0] = rx, rot[1] = ry, and
+ // rot[2] = rz. A change in x will move the hole ITS in the ALICE
+ // global x direction, the same for a change in y. A change in z will
+ // result in a translation of the ITS as a hole up or down the beam line.
+ // A change in the angles will result in the inclination of the ITS with
+ // respect to the beam line, except for an effective rotation about the
+ // beam axis which will just rotate the ITS as a hole about the beam axis.
+ // Intputs are:
+ // Float_t *tran A 3 element array representing the global translations.
+ // the elements are x,y,z in cm.
+ // Float_t *rot A 3 element array representing the global rotation
+ // angles about the three axis x,y,z in radians
+ // Outputs are:
+ // none.
+ Int_t i,j;
+ Double_t t[3],r[3];
+ AliITSgeomMatrix *g;
-//___________________________________________________________________________
-void AliITSgeom::PrintComparison(FILE *fp,AliITSgeom *other){
-////////////////////////////////////////////////////////////////////////
-// This function was primarily created for diagnostic reasons. It
-// print to a file pointed to by the file pointer fp the difference
-// between two AliITSgeom classes. The format of the file is basicly,
-// define d? to be the difference between the same element of the two
-// classes. For example dfrx = this->fg[i][j].frx - other->fg[i][j].frx.
-// if(at least one of dfx0, dfy0, dfz0,dfrx,dfry,dfrz are non zero) then print
-// layer ladder detector dfx0 dfy0 dfz0 dfrx dfry dfrz
-// if(at least one of the 9 elements of dfr[] are non zero) then print
-// layer ladder detector dfr[0] dfr[1] dfr[2]
-// dfr[3] dfr[4] dfr[5]
-// dfr[6] dfr[7] dfr[8]
-// Only non zero values are printed to save space. The differences are
-// typical written to a file because there are usually a lot of numbers
-// printed out and it is usually easier to read them in some nice editor
-// rather than zooming quickly past you on a screen. fprintf is used to
-// do the printing. The fShapeIndex difference is not printed at this time.
-////////////////////////////////////////////////////////////////////////
- Int_t i,j,k,l;
- Double_t xt,yt,zt,xo,yo,zo;
- Double_t rxt,ryt,rzt,rxo,ryo,rzo; // phi in radians
- ITS_geom *gt,*go;
- Bool_t t;
-
- for(i=0;i<this->fNlayers;i++){
- for(j=0;j<this->fNlad[i];j++) for(k=0;k<this->fNdet[i];k++){
- l = this->fNdet[i]*j+k; // resolved index
- gt = &(this->fg[i][l]);
- go = &(other->fg[i][l]);
- xt = gt->fx0; yt = gt->fy0; zt = gt->fz0;
- xo = go->fx0; yo = go->fy0; zo = go->fz0;
- rxt = gt->frx; ryt = gt->fry; rzt = gt->frz;
- rxo = go->frx; ryo = go->fry; rzo = go->frz;
- if(!(xt==xo&&yt==yo&&zt==zo&&rxt==rxo&&ryt==ryo&&rzt==rzo))
- fprintf(fp,"%1.1d %2.2d %2.2d dTrans=%f %f %f drot=%f %f %f\n",
- i+1,j+1,k+1,xt-xo,yt-yo,zt-zo,rxt-rxo,ryt-ryo,rzt-rzo);
- t = kFALSE;
- for(i=0;i<9;i++) t = gt->fr[i] != go->fr[i];
- if(t){
- fprintf(fp,"%1.1d %2.2d %2.2d dfr= %e %e %e\n",i+1,j+1,k+1,
- gt->fr[0]-go->fr[0],gt->fr[1]-go->fr[1],gt->fr[2]-go->fr[2]);
- fprintf(fp," dfr= %e %e %e\n",
- gt->fr[3]-go->fr[3],gt->fr[4]-go->fr[4],gt->fr[5]-go->fr[5]);
- fprintf(fp," dfr= %e %e %e\n",
- gt->fr[6]-go->fr[6],gt->fr[7]-go->fr[7],gt->fr[8]-go->fr[8]);
- }
- } // end for j,k
- } // end for i
- return;
+ fTrans = (fTrans && 0xfffd) + 2; // set bit 1 true.
+ for(i=0;i<fNmodules;i++){
+ g = this->GetGeomMatrix(i);
+ g->GetTranslation(t);
+ g->GetAngles(r);
+ for(j=0;j<3;j++){
+ t[j] += tran[j];
+ r[j] += rot[j];
+ } // end for j
+ g->SetTranslation(t);
+ g->SetAngles(r);
+ } // end for i
+ return;
}
+//______________________________________________________________________
+void AliITSgeom::GlobalCylindericalChange(const Float_t *tran,
+ const Float_t *rot){
+ // This function performs a cylindrical translation and rotation of
+ // each ITS element by a fixed about in radius, rphi, and z from its
+ // default position by an amount determined by the three element arrays
+ // tran and rot. If every element of tran and
+ // rot are zero then there is no change made the geometry. The
+ // change is global in that the exact same distance change in translation
+ // and rotation is done to every detector element in the exact same way.
+ // The units of the translation are those of the Monte Carlo, usually cm,
+ // and those of the rotation are in radians. The elements of tran
+ // are tran[0] = r, tran[1] = rphi, and tran[2] = z.
+ // The elements of rot are rot[0] = rx, rot[1] = ry, and
+ // rot[2] = rz. A change in r will results in the increase of the
+ // radius of each layer by the same about. A change in rphi will results in
+ // the rotation of each layer by a different angle but by the same
+ // circumferential distance. A change in z will result in a translation
+ // of the ITS as a hole up or down the beam line. A change in the angles
+ // will result in the inclination of the ITS with respect to the beam
+ // line, except for an effective rotation about the beam axis which will
+ // just rotate the ITS as a hole about the beam axis.
+ // Intputs are:
+ // Float_t *tran A 3 element array representing the global translations.
+ // the elements are r,theta,z in cm/radians.
+ // Float_t *rot A 3 element array representing the global rotation
+ // angles about the three axis x,y,z in radians
+ // Outputs are:
+ // none.
+ Int_t i,j;
+ Double_t t[3],ro[3],r,r0,phi,rphi;
+ AliITSgeomMatrix *g;
-//___________________________________________________________________________
-void AliITSgeom::PrintData(FILE *fp,Int_t lay,Int_t lad,Int_t det){
-////////////////////////////////////////////////////////////////////////
-// This function prints out the coordinate transformations for
-// the particular detector defined by layer, ladder, and detector
-// to the file pointed to by the File pointer fp. fprinf statements
-// are used to print out the numbers. The format is
-// layer ladder detector Trans= fx0 fy0 fz0 rot= frx fry frz Shape=fShapeIndex
-// dfr= fr[0] fr[1] fr[2]
-// dfr= fr[3] fr[4] fr[5]
-// dfr= fr[6] fr[7] fr[8]
-// By indicating which detector, some control over the information
-// is given to the user. The output it written to the file pointed
-// to by the file pointer fp. This can be set to stdout if you want.
-////////////////////////////////////////////////////////////////////////
- Int_t i,j,k,l;
- ITS_geom *gt;
-
- i = lay-1;
- j = lad-1;
- k = det-1;
- l = this->fNdet[i]*j+k; // resolved index
- gt = &(this->fg[i][l]);
- fprintf(fp,"%1.1d %2.2d %2.2d Trans=%f %f %f rot=%f %f %f Shape=%d\n",
- i+1,j+1,k+1,gt->fx0,gt->fy0,gt->fz0,gt->frx,gt->fry,gt->frz,
- gt->fShapeIndex);
- fprintf(fp," dfr= %e %e %e\n",gt->fr[0],gt->fr[1],gt->fr[2]);
- fprintf(fp," dfr= %e %e %e\n",gt->fr[3],gt->fr[4],gt->fr[5]);
- fprintf(fp," dfr= %e %e %e\n",gt->fr[6],gt->fr[7],gt->fr[8]);
- return;
+ fTrans = (fTrans && 0xfffd) + 2; // set bit 1 true.
+ for(i=0;i<fNmodules;i++){
+ g = this->GetGeomMatrix(i);
+ g->GetTranslation(t);
+ g->GetAngles(ro);
+ r = r0= TMath::Hypot(t[1],t[0]);
+ phi = TMath::ATan2(t[1],t[0]);
+ rphi = r0*phi;
+ r += tran[0];
+ rphi += tran[1];
+ phi = rphi/r0;
+ t[0] = r*TMath::Cos(phi);
+ t[1] = r*TMath::Sin(phi);
+ t[2] += tran[2];
+ for(j=0;j<3;j++){
+ ro[j] += rot[j];
+ } // end for j
+ g->SetTranslation(t);
+ g->SetAngles(ro);
+ } // end for i
+ return;
}
-//___________________________________________________________________________
-void AliITSgeom::Streamer(TBuffer &R__b){
-////////////////////////////////////////////////////////////////////////
-// The default Streamer function "written by ROOT" doesn't write out
-// the arrays referenced by pointers. Therefore, a specific Streamer function
-// has to be written. This function should not be modified but instead added
-// on to so that older versions can still be read. The proper handling of
-// the version dependent streamer function hasn't been written do to the lack
-// of finding an example at the time of writting.
-////////////////////////////////////////////////////////////////////////
- // Stream an object of class AliITSgeom.
- Int_t i,j,k;
+//______________________________________________________________________
+void AliITSgeom::RandomChange(const Float_t *stran,const Float_t *srot){
+ // This function performs a Gaussian random displacement and/or
+ // rotation about the present global position of each active
+ // volume/detector of the ITS. The sigma of the random displacement
+ // is determined by the three element array stran, for the
+ // x y and z translations, and the three element array srot,
+ // for the three rotation about the axis x y and z.
+ // Intputs are:
+ // Float_t *stran A 3 element array representing the global translations
+ // variances. The elements are x,y,z in cm.
+ // Float_t *srot A 3 element array representing the global rotation
+ // angles variances about the three axis x,y,z in radians.
+ // Outputs are:
+ // none.
+ Int_t i,j;
+ Double_t t[3],r[3];
+ AliITSgeomMatrix *g;
- if (R__b.IsReading()) {
- Version_t R__v = R__b.ReadVersion(); if (R__v) { }
- TObject::Streamer(R__b);
- R__b >> fNlayers;
- if(fNlad!=0) delete[] fNlad;
- if(fNdet!=0) delete[] fNdet;
- fNlad = new Int_t[fNlayers];
- fNdet = new Int_t[fNlayers];
- for(i=0;i<fNlayers;i++) R__b >> fNlad[i];
- for(i=0;i<fNlayers;i++) R__b >> fNdet[i];
- if(fg!=0){
- for(i=0;i<fNlayers;i++) delete[] fg[i];
- delete[] fg;
- } // end if fg!=0
- fg = new ITS_geom*[fNlayers];
- for(i=0;i<fNlayers;i++){
- fg[i] = new ITS_geom[fNlad[i]*fNdet[i]];
- for(j=0;j<fNlad[i]*fNdet[i];j++){
- R__b >> fg[i][j].fShapeIndex;
- R__b >> fg[i][j].fx0;
- R__b >> fg[i][j].fy0;
- R__b >> fg[i][j].fz0;
- R__b >> fg[i][j].frx;
- R__b >> fg[i][j].fry;
- R__b >> fg[i][j].frz;
- for(k=0;k<9;k++) R__b >> fg[i][j].fr[k];
- } // end for j
- } // end for i
- R__b >> fShape;
- } else {
- R__b.WriteVersion(AliITSgeom::IsA());
- TObject::Streamer(R__b);
- R__b << fNlayers;
- for(i=0;i<fNlayers;i++) R__b << fNlad[i];
- for(i=0;i<fNlayers;i++) R__b << fNdet[i];
- for(i=0;i<fNlayers;i++) for(j=0;j<fNlad[i]*fNdet[i];j++){
- R__b << fg[i][j].fShapeIndex;
- R__b << fg[i][j].fx0;
- R__b << fg[i][j].fy0;
- R__b << fg[i][j].fz0;
- R__b << fg[i][j].frx;
- R__b << fg[i][j].fry;
- R__b << fg[i][j].frz;
- for(k=0;k<9;k++) R__b << fg[i][j].fr[k];
- } // end for i,j
- R__b << fShape;
- }
+ fTrans = (fTrans && 0xfffd) + 2; // set bit 1 true.
+ for(i=0;i<fNmodules;i++){
+ g = this->GetGeomMatrix(i);
+ g->GetTranslation(t);
+ g->GetAngles(r);
+ for(j=0;j<3;j++){
+ t[j] += gRandom->Gaus(0.0,stran[j]);
+ r[j] += gRandom->Gaus(0.0, srot[j]);
+ } // end for j
+ g->SetTranslation(t);
+ g->SetAngles(r);
+ } // end for i
+ return;
}
+//______________________________________________________________________
+void AliITSgeom::RandomCylindericalChange(const Float_t *stran,
+ const Float_t *srot){
+ // This function performs a Gaussian random displacement and/or
+ // rotation about the present global position of each active
+ // volume/detector of the ITS. The sigma of the random displacement
+ // is determined by the three element array stran, for the
+ // r rphi and z translations, and the three element array srot,
+ // for the three rotation about the axis x y and z. This random change
+ // in detector position allow for the simulation of a random uncertainty
+ // in the detector positions of the ITS.
+ // Intputs are:
+ // Float_t *stran A 3 element array representing the global translations
+ // variances. The elements are r,theta,z in cm/readians.
+ // Float_t *srot A 3 element array representing the global rotation
+ // angles variances about the three axis x,y,z in radians.
+ // Outputs are:
+ // none.
+ Int_t i,j;
+ Double_t t[3],ro[3],r,r0,phi,rphi;
+ TRandom ran;
+ AliITSgeomMatrix *g;
-//___________________________________________________________________________
-ofstream & AliITSgeom::PrintGeom(ofstream &R__b){
-////////////////////////////////////////////////////////////////////////
-// The default Streamer function "written by ROOT" doesn't write out
-// the arrays referenced by pointers. Therefore, a specific Streamer function
-// has to be written. This function should not be modified but instead added
-// on to so that older versions can still be read. The proper handling of
-// the version dependent streamer function hasn't been written do to the lack
-// of finding an example at the time of writting.
-////////////////////////////////////////////////////////////////////////
- // Stream an object of class AliITSgeom.
- Int_t i,j,k;
+ fTrans = (fTrans && 0xfffd) + 2; // set bit 1 true.
+ for(i=0;i<fNmodules;i++){
+ g = this->GetGeomMatrix(i);
+ g->GetTranslation(t);
+ g->GetAngles(ro);
+ r = r0= TMath::Hypot(t[1],t[0]);
+ phi = TMath::ATan2(t[1],t[0]);
+ rphi = r0*phi;
+ r += ran.Gaus(0.0,stran[0]);
+ rphi += ran.Gaus(0.0,stran[1]);
+ phi = rphi/r0;
+ t[0] = r*TMath::Cos(phi);
+ t[1] = r*TMath::Sin(phi);
+ t[2] += ran.Gaus(0.0,stran[2]);
+ for(j=0;j<3;j++){
+ ro[j] += ran.Gaus(0.0, srot[j]);
+ } // end for j
+ g->SetTranslation(t);
+ g->SetAngles(ro);
+ } // end for i
+ return;
+}
+//______________________________________________________________________
+void AliITSgeom::GeantToTracking(AliITSgeom &source){
+ // Copy the geometry data but change it to go between the ALICE
+ // Global coordinate system to that used by the ITS tracking. A slightly
+ // different coordinate system is used when tracking. This coordinate
+ // system is only relevant when the geometry represents the cylindrical
+ // ALICE ITS geometry. For tracking the Z axis is left alone but X-> -Y
+ // and Y-> X such that X always points out of the ITS cylinder for every
+ // layer including layer 1 (where the detectors are mounted upside down).
+ // Inputs are:
+ // AliITSgeom &source The AliITSgeom class with which to make this
+ // a copy of.
+ // Outputs are:
+ // return *this The a new copy of source.
+ //Begin_Html
+ /*
+ <img src="picts/ITS/AliITSgeomMatrix_T1.gif">
+ */
+ //End_Html
+ Int_t i,j,k,l,id[3];
+ Double_t r0[3][3],r1[3][3];
+ Double_t a0[3][3] = {{0.,+1.,0.},{-1.,0.,0.},{0.,0.,+1.}};
+ Double_t a1[3][3] = {{0.,-1.,0.},{+1.,0.,0.},{0.,0.,+1.}};
- R__b.setf(ios::scientific);
- R__b << fNlayers << " ";
- for(i=0;i<fNlayers;i++) R__b << fNlad[i] << " ";
- for(i=0;i<fNlayers;i++) R__b << fNdet[i] << "\n";
- for(i=0;i<fNlayers;i++) for(j=0;j<fNlad[i]*fNdet[i];j++){
- R__b <<setprecision(16) << fg[i][j].fShapeIndex << " ";
- R__b <<setprecision(16) << fg[i][j].fx0 << " ";
- R__b <<setprecision(16) << fg[i][j].fy0 << " ";
- R__b <<setprecision(16) << fg[i][j].fz0 << " ";
- R__b <<setprecision(16) << fg[i][j].frx << " ";
- R__b <<setprecision(16) << fg[i][j].fry << " ";
- R__b <<setprecision(16) << fg[i][j].frz << "\n";
- for(k=0;k<9;k++) R__b <<setprecision(16) << fg[i][j].fr[k] << " ";
- R__b << "\n";
- } // end for i,j
-// R__b << fShape;
- return R__b;
+ *this = source; // copy everything
+ for(i=0;i<GetIndexMax();i++){
+ GetGeomMatrix(i)->GetIndex(id);
+ GetGeomMatrix(i)->GetMatrix(r0);
+ if(id[0]==1){ // Layer 1 is treated different from the others.
+ for(j=0;j<3;j++) for(k=0;k<3;k++){
+ r1[j][k] = 0.;
+ for(l=0;l<3;l++) r1[j][k] += a0[j][l]*r0[l][k];
+ } // end for j,k
+ }else{
+ for(j=0;j<3;j++) for(k=0;k<3;k++){
+ r1[j][k] = 0.;
+ for(l=0;l<3;l++) r1[j][k] += a1[j][l]*r0[l][k];
+ } // end for j,k
+ } // end if
+ GetGeomMatrix(i)->SetMatrix(r1);
+ } // end for i
+ this->fTrans = (this->fTrans && 0xfffe) + 1; // set bit 0 true.
+ return;
}
+//______________________________________________________________________
+Int_t AliITSgeom::GetNearest(const Double_t g[3],Int_t lay){
+ // Finds the Detector (Module) that is nearest the point g [cm] in
+ // ALICE Global coordinates. If layer !=0 then the search is restricted
+ // to Detectors (Modules) in that particular layer.
+ // Inputs are:
+ // Double_t g[3] The ALICE Cartesean global coordinate from which the
+ // distance is to be calculated with.
+ // Int_t lay The layer to restrict the search to. If layer=0 then
+ // all layers are searched. Default is lay=0.
+ // Outputs are:
+ // return The module number representing the nearest module.
+ Int_t i,l,a,e,in=0;
+ Double_t d,dn=1.0e10;
+ Bool_t t=lay!=0; // skip if lay = 0 default value check all layers.
-//___________________________________________________________________________
-ifstream & AliITSgeom::ReadGeom(ifstream &R__b){
-////////////////////////////////////////////////////////////////////////
-// The default Streamer function "written by ROOT" doesn't write out
-// the arrays referenced by pointers. Therefore, a specific Streamer function
-// has to be written. This function should not be modified but instead added
-// on to so that older versions can still be read. The proper handling of
-// the version dependent streamer function hasn't been written do to the lack
-// of finding an example at the time of writting.
-////////////////////////////////////////////////////////////////////////
- // Stream an object of class AliITSgeom.
- Int_t i,j,k;
+ for(i=0;i<fNmodules;i++){
+ if(t){GetModuleId(i,l,a,e);if(l!=lay) continue;}
+ if((d=GetGeomMatrix(i)->Distance2(g))<dn){
+ dn = d;
+ in = i;
+ } // end if
+ } // end for i
+ return in;
+}
+//______________________________________________________________________
+void AliITSgeom::GetNearest27(const Double_t g[3],Int_t n[27],Int_t lay){
+ // Finds 27 Detectors (Modules) that are nearest the point g [cm] in
+ // ALICE Global coordinates. If layer !=0 then the search is restricted
+ // to Detectors (Modules) in that particular layer. The number 27 comes
+ // from including the nearest detector and all those around it (up, down,
+ // left, right, forwards, backwards, and the corners).
+ // Inputs are:
+ // Double_t g[3] The ALICE Cartesean global coordinate from which the
+ // distance is to be calculated with.
+ // Int_t lay The layer to restrict the search to. If layer=0 then
+ // all layers are searched. Default is lay=0.
+ // Outputs are:
+ // Int_t n[27] The module number representing the nearest 27 modules
+ // in order.
+ Int_t i,l,a,e,in[27]={0,0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,0,};
+ Double_t d,dn[27]={1.0e10,1.0e10,1.0e10,1.0e10,1.0e10,1.0e10,
+ 1.0e10,1.0e10,1.0e10,1.0e10,1.0e10,1.0e10,
+ 1.0e10,1.0e10,1.0e10,1.0e10,1.0e10,1.0e10,
+ 1.0e10,1.0e10,1.0e10,1.0e10,1.0e10,1.0e10,
+ 1.0e10,1.0e10,1.0e10};
+ Bool_t t=(lay!=0); // skip if lay = 0 default value check all layers.
- R__b >> fNlayers;
- if(fNlad!=0) delete[] fNlad;
- if(fNdet!=0) delete[] fNdet;
- fNlad = new Int_t[fNlayers];
- fNdet = new Int_t[fNlayers];
- for(i=0;i<fNlayers;i++) R__b >> fNlad[i];
- for(i=0;i<fNlayers;i++) R__b >> fNdet[i];
- if(fg!=0){
- for(i=0;i<fNlayers;i++) delete[] fg[i];
- delete[] fg;
- } // end if fg!=0
- fg = new ITS_geom*[fNlayers];
- for(i=0;i<fNlayers;i++){
- fg[i] = new ITS_geom[fNlad[i]*fNdet[i]];
- for(j=0;j<fNlad[i]*fNdet[i];j++){
- R__b >> fg[i][j].fShapeIndex;
- R__b >> fg[i][j].fx0;
- R__b >> fg[i][j].fy0;
- R__b >> fg[i][j].fz0;
- R__b >> fg[i][j].frx;
- R__b >> fg[i][j].fry;
- R__b >> fg[i][j].frz;
- for(k=0;k<9;k++) R__b >> fg[i][j].fr[k];
- } // end for j
- } // end for i
-// R__b >> fShape;
- return R__b;
+ for(i=0;i<fNmodules;i++){
+ if(t){GetModuleId(i,l,a,e);if(l!=lay) continue;}
+ for(a=0;a<27;a++){
+ d = GetGeomMatrix(i)->Distance2(g);
+ if(d<dn[a]){
+ for(e=26;e>a;e--){dn[e] = dn[e-1];in[e] = in[e-1];}
+ dn[a] = d; in[a] = i;
+ } // end if d<dn[i]
+ } // end for a
+ } // end for i
+ for(i=0;i<27;i++) n[i] = in[i];
}
+//----------------------------------------------------------------------