#ifndef ALIITSRESPONSESDD_H
#define ALIITSRESPONSESDD_H
+
+/* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ * See cxx source for full Copyright notice */
+
+/*
+ $Id$
+*/
#include "TArrayF.h"
-#include <TString.h>
-#include <iostream.h>
#include "AliITSresponse.h"
// response for SDD
class AliITSresponseSDD : public AliITSresponse {
public:
- //
- // Configuration methods
- //
+ //
+ // Configuration methods
+ //
AliITSresponseSDD();
AliITSresponseSDD(const char *dataType);
virtual ~AliITSresponseSDD();
- void SetElectronics(Int_t p1=1) {
- // Electronics: Pascal (1) or OLA (2)
- fElectronics=p1;
- }
-
- Int_t Electronics() {
- // Electronics: 1 = Pascal; 2 = OLA
- return fElectronics;
- }
-
- void SetMaxAdc(Float_t p1=1024.) {
- // Adc-count saturation value
- fMaxAdc=p1;
- }
- Float_t MaxAdc() {
- // Get maximum Adc-count value
- return fMaxAdc;
- }
-
- void SetChargeLoss(Float_t p1=0.0) {
- // Set Linear Charge Loss Steepness // 0.01 for 20%
- fChargeLoss=p1;
- }
- Float_t ChargeLoss() {
- // Get Charge Loss Coefficient
- return fChargeLoss;
- }
-
- void SetDynamicRange(Float_t p1=132.) {
- // Set Dynamic Range
- fDynamicRange=p1;
- }
- Float_t DynamicRange() {
- // Get Dynamic Range
- return fDynamicRange;
- }
-
- void SetDiffCoeff(Float_t p1=3.23,Float_t p2=30.) {
+// Implementation of virtual member functions declared in AliITSresponse
+ virtual void SetElectronics(Int_t p1=1)
+ {fElectronics=p1; /* Electronics: Pascal (1) or OLA (2) */ }
+ virtual Int_t Electronics() const {// Electronics: 1 = Pascal; 2 = OLA
+ return fElectronics;}
+ virtual void SetMaxAdc(Float_t p1) {// Adc-count saturation value
+ fMaxAdc=p1;}
+ virtual Float_t MaxAdc() const {// Get maximum Adc-count value
+ return fMaxAdc;}
+ virtual void SetChargeLoss(Float_t p1) {
+ // Set Linear Charge Loss Steepness // 0.01 for 20%
+ fChargeLoss=p1;}
+ Float_t ChargeLoss() const {// Get Charge Loss Coefficient
+ return fChargeLoss;}
+ virtual void SetDynamicRange(Float_t p1) {// Set Dynamic Range
+ fDynamicRange = p1;}
+ virtual Float_t DynamicRange() const {// Get Dynamic Range
+ return fDynamicRange;}
// Diffusion coefficients
- fDiffCoeff=p1;
- fDiffCoeff1=p2;
- }
- void DiffCoeff(Float_t&diff,Float_t&diff1) {
+ virtual void SetDiffCoeff(Float_t p1, Float_t p2)
+ {fDiffCoeff=p1;fDiffCoeff1=p2;}
// Get diffusion coefficients
- diff = fDiffCoeff;
- diff1 = fDiffCoeff1;
- }
-
- void SetDriftSpeed(Float_t p1=7.3) {
- // Drift velocity
- fDriftSpeed=p1;
- }
- Float_t DriftSpeed() {
- // drift speed
- return fDriftSpeed;
- }
-
- void SetTemperature(Float_t p1=23.) {
- // Temperature
- fTemperature=p1;
- }
- Float_t Temperature() {
- // Get temperature
- return fTemperature;
- }
-
- void SetDataType(const char *data="simulated") {
- // Type of data - real or simulated
- fDataType=data;
- }
- const char *DataType() const {
- // Get data type
- return fDataType.Data();
- }
-
- void SetParamOptions(const char *opt1="same",const char *opt2="same"){
- // Parameters: "same" or read from "file"
- fParam1=opt1; fParam2=opt2;
- }
- void ParamOptions(char *opt1,char *opt2) {
- // options
- strcpy(opt1,fParam1.Data()); strcpy(opt2,fParam2.Data());
- }
-
- void SetNoiseParam(Float_t n=0., Float_t b=20.){
- // Noise and baseline // 8.3 for ALICE with beam test measurements
- fNoise=n; fBaseline=b;
- }
- void SetNoiseAfterElectronics(Float_t n=0.){
- // Noise after electronics (ADC units) // 1.6 for ALICE from beam test measurements
- fNoiseAfterEl=n;
- }
- void GetNoiseParam(Float_t &n, Float_t &b) {
- // get noise param
- n=fNoise; b=fBaseline;
- }
- Float_t GetNoiseAfterElectronics(){
- // Noise after electronics (ADC units)
- return fNoiseAfterEl;
- }
-
- void SetDo10to8(Bool_t bitcomp=kTRUE) {
- // set the option for 10 to 8 bit compression
- fBitComp = bitcomp;
- }
-
- Bool_t Do10to8() {
- // get 10 to 8 compression option
- return fBitComp;
- }
-
- void SetZeroSupp (const char *opt="1D") {
- // Zero-suppression option - could be 1D, 2D or non-ZS
- fOption=opt;
- }
- const char *ZeroSuppOption() const {
- // Get zero-suppression option
- return fOption.Data();
- }
- void SetMinVal(Int_t mv=4) {
- // Min value used in 2D - could be used as a threshold setting
- fMinVal = mv;
- }
- Int_t MinVal() {
- // min val
- return fMinVal;
- }
-
- void SetFilenames(const char *f1="",const char *f2="",const char *f3="") {
- // Set filenames - input, output, parameters ....
- fFileName1=f1; fFileName2=f2; fFileName3=f3;
- }
- void Filenames(char *input,char *baseline,char *param) {
- // Filenames
- strcpy(input,fFileName1.Data()); strcpy(baseline,fFileName2.Data());
- strcpy(param,fFileName3.Data());
- }
-
-
- void SetOutputOption(Bool_t write=kFALSE) {
- // set output option
- fWrite = write;
- }
- Bool_t OutputOption() {
- // output option
- return fWrite;
- }
- //
- // Compression parameters
- void SetCompressParam(Int_t cp[8]);
- void GiveCompressParam(Int_t *x);
-
- //
- // Detector type response methods
- void SetNSigmaIntegration(Float_t p1=3.) {
- // Set number of sigmas over which cluster disintegration is performed
- fNsigmas=p1;
- }
- Float_t NSigmaIntegration() {
- // Get number of sigmas over which cluster disintegration is performed
- return fNsigmas;
- }
- void SetNLookUp(Int_t p1=121) {
- // Set number of sigmas over which cluster disintegration is performed
- fNcomps=p1;
- fGaus = new TArrayF(fNcomps+1);
- for(Int_t i=0; i<=fNcomps; i++) {
- Float_t x = -fNsigmas + (2.*i*fNsigmas)/(fNcomps-1);
- (*fGaus)[i] = exp(-((x*x)/2));
- // cout << "fGaus[" << i << "]: " << fGaus->At(i) << endl;
- }
- }
+ virtual void DiffCoeff(Float_t&diff,Float_t&diff1) const
+ {diff = fDiffCoeff;diff1 = fDiffCoeff1;}
+ virtual void SetDriftSpeed(Float_t p1) {// Drift velocity
+ fDriftSpeed=p1;}
+ virtual Float_t DriftSpeed() const {// drift speed
+ return fDriftSpeed;}
+ virtual void SetParamOptions(const char *opt1,const char *opt2){
+ // Parameters: "same" or read from "file"
+ fParam1=opt1; fParam2=opt2;}
+ virtual void ParamOptions(char *opt1,char *opt2) const {// options
+ strcpy(opt1,fParam1.Data()); strcpy(opt2,fParam2.Data());}
+ virtual void SetNoiseParam(Float_t n, Float_t b){
+ // Noise and baseline // 10 for ALICE with beam test measurements 2001
+ fNoise=n; fBaseline=b;}
+ virtual void GetNoiseParam(Float_t &n, Float_t &b) const {// get noise param
+ n=fNoise; b=fBaseline;}
+ virtual Bool_t Do10to8() const {// get 10 to 8 compression option
+ return fBitComp;}
+ void SetZeroSupp (const char *opt) {
+ // Zero-suppression option - could be 1D, 2D or non-ZS
+ fOption=opt;}
+ const char *ZeroSuppOption() const {// Get zero-suppression option
+ return fOption.Data();}
+ virtual void SetThresholds(Float_t mv, Float_t /* b */){
+ // Min value used in 2D - could be used as a threshold setting
+ fMinVal = mv;}
+ virtual void Thresholds(Float_t & mv, Float_t & /* b */) const
+ {mv = fMinVal;}
+ virtual void GiveCompressParam(Int_t *x) const;
+ // Detector type response methods
+ virtual void SetNSigmaIntegration(Float_t p1) {
+ // Set number of sigmas over which cluster disintegration is performed
+ fNsigmas=p1;}
+ virtual Float_t NSigmaIntegration() const {
+ // Get number of sigmas over which cluster disintegration is performed
+ return fNsigmas;}
+ virtual void SetNLookUp(Int_t p1);
// Get number of intervals in which the gaussian lookup table is divided
- Int_t GausNLookUp() {return fNcomps;}
-
- Float_t IntPH(Float_t eloss) {
- // Pulse height from scored quantity (eloss)
- return 0.;
- }
- Float_t IntXZ(AliITSsegmentation *) {
- // Charge disintegration
- return 0.;
- }
- Float_t GausLookUp(Int_t i) {
- if(i<0 || i>=fNcomps) return 0.;
- return fGaus->At(i);
- }
- void SetDeadChannels(Int_t nmodules=0, Int_t nchips=0, Int_t nchannels=0);
- void PrintGains();
- void Print();
+ virtual Int_t GausNLookUp() const {return fNcomps;}
+ virtual Float_t GausLookUp(Int_t i) const {
+ if(i<0 || i>=fNcomps) return 0.;return fGaus->At(i);}
+
+//Declaration of member functions peculiar to this class
+ Int_t Convert8to10(Int_t signal) const; //undo 10 to 8 bit SDD compresion
+ void SetNoiseAfterElectronics(Float_t n=2.38){
+ // Noise after electronics (ADC units)
+ // 2.36 for ALICE from beam test measurements 2001
+ fNoiseAfterEl=n;}
+ Float_t GetNoiseAfterElectronics() const {
+ // Noise after electronics (ADC units)
+ return fNoiseAfterEl;}
+ void SetJitterError(Float_t jitter=20) {
+ // set Jitter error (20 um for ALICE from beam test measurements 2001)
+ fJitterError=jitter;}
+ Float_t JitterError() const {// set Jitter error
+ return fJitterError;}
+ void SetDo10to8(Bool_t bitcomp=kTRUE) {
+ // set the option for 10 to 8 bit compression
+ fBitComp = bitcomp;}
+ // Compression parameters
+ void SetCompressParam(Int_t cp[8]);
+ void SetDeadChannels(Int_t nmodules=0, Int_t nchips=0, Int_t nchannels=0);
+ Int_t GetDeadModules() const { return fDeadModules; }
+ Int_t GetDeadChips() const { return fDeadChips; }
+ Int_t GetDeadChannels() const { return fDeadChannels; }
+ Float_t Gain(Int_t mod,Int_t chip,Int_t ch)const {return fGain[mod][chip][ch]; }
+ // these functions should be move to AliITSsegmentationSDD
+ const Int_t Modules() const{return fgkModules;}// Total number of SDD modules
+ const Int_t Chips() const{return fgkChips;} // Number of chips/module
+ const Int_t Channels() const { return fgkChannels;}// Number of channels/chip
+ //********
+ void PrintGains();
+ void Print();
+ // not implemented virtual methods (devlared in the mother class
+ virtual void SetDetParam(Float_t *)
+ {NotImplemented("SetDetParam");}
+ virtual void GetDetParam(Float_t *) const
+ {NotImplemented("GetDetParam");}
+ virtual void SetNDetParam(Int_t /* n */)
+ {NotImplemented("SetNDetParam");}
+ virtual Int_t NDetParam() const
+ {NotImplemented("NDetParam"); return 0;}
+ virtual void SetSigmaSpread(Float_t, Float_t)
+ {NotImplemented("SetSigmaSpread");}
+ virtual void SigmaSpread(Float_t & /* p1 */,Float_t & /* p2 */) const
+ {NotImplemented("SigmaSpread");}
-private:
+ protected:
+ // these statis const should be move to AliITSsegmentationSDD
+ static const Int_t fgkModules = 520; // Total number of SDD modules
+ static const Int_t fgkChips = 4; // Number of chips/module
+ static const Int_t fgkChannels = 64; // Number of channels/chip
+ //*******
+ static const Int_t fgkMaxAdcDefault; // default for fMaxAdc
+ static const Float_t fgkDynamicRangeDefault; // default for fDynamicRange
+ static const Float_t fgkfChargeLossDefault; // default for fChargeLoss
+ static const Float_t fgkDiffCoeffDefault; // default for fDiffCoeff
+ static const Float_t fgkDiffCoeff1Default; // default for fDiffCoeff1
+ static const Float_t fgkTemperatureDefault; // default for fT (Kelvin)
+ static const TString fgkParam1Default; // default for fParam1
+ static const TString fgkParam2Default; // default for fParam2
+ static const Float_t fgkNoiseDefault; // default for fNoise
+ static const Float_t fgkBaselineDefault; // default for fBaseline
+ static const TString fgkOptionDefault; // default for fOption
+ static const Float_t fgkMinValDefault; // default for fMinVal
+ static const Float_t fgkDriftSpeedDefault; // default for fDriftSpeed
+ static const Float_t fgkNsigmasDefault; //default for fNsigmas
+ static const Int_t fgkNcompsDefault; //default for fNcomps
+ //
- AliITSresponseSDD(const AliITSresponseSDD &source); // copy constructor
- AliITSresponseSDD& operator=(const AliITSresponseSDD &source); // ass. op.
-
-protected:
-
- static const Int_t fModules = 520; // Total number of SDD modules
- static const Int_t fChips = 4; // Number of chips/module
- static const Int_t fChannels = 64; // Number of channels/chip
- Float_t fGain[fModules][fChips][fChannels]; // Array for channel gains
+ Int_t fDeadModules; // Total number of dead SDD modules
+ Int_t fDeadChips; // Number of dead chips
+ Int_t fDeadChannels; // Number of dead channels
+ Float_t fGain[fgkModules][fgkChips][fgkChannels]; // Array for channel gains
+ Int_t fCPar[8]; // Hardware compression parameters
+ Float_t fNoise; // Noise
+ Float_t fBaseline; // Baseline
+ Float_t fNoiseAfterEl; // Noise after electronics
+ Float_t fJitterError; // jitter error
+ Float_t fDynamicRange; // Set Dynamic Range
+ Float_t fChargeLoss; // Set Linear Coefficient for Charge Loss
+ Float_t fDriftSpeed; // Drift velocity
+ Int_t fElectronics; // Electronics
+ Float_t fMaxAdc; // Adc saturation value
+ Float_t fDiffCoeff; // Diffusion Coefficient (scaling the time)
+ Float_t fDiffCoeff1; // Diffusion Coefficient (constant term)
+ Float_t fNsigmas; // Number of sigmas over which charge disintegration
+ // is performed
+ TArrayF *fGaus; // Gaussian lookup table for signal generation
+ Int_t fNcomps; // Number of samplings along the gaussian
+ Float_t fMinVal; // Min value used in 2D zero-suppression algo
+ Bool_t fBitComp; // 10 to 8 bit compression option
+ TString fOption; // Zero-suppresion option (1D, 2D or none)
+ TString fParam1; // Read baselines from file option
+ TString fParam2; // Read compression algo thresholds from file
- Int_t fCPar[8]; // Hardware compression parameters
- Float_t fNoise; // Noise
- Float_t fBaseline; // Baseline
- Float_t fNoiseAfterEl; // Noise after electronics
- Float_t fDynamicRange; // Set Dynamic Range
- Float_t fChargeLoss; // Set Linear Coefficient for Charge Loss
- Float_t fTemperature; // Temperature
- Float_t fDriftSpeed; // Drift velocity
- Int_t fElectronics; // Electronics
-
- Float_t fMaxAdc; // Adc saturation value
- Float_t fDiffCoeff; // Diffusion Coefficient (scaling the time)
- Float_t fDiffCoeff1; // Diffusion Coefficient (constant term)
- Float_t fNsigmas; // Number of sigmas over which charge disintegration
- // is performed
- TArrayF *fGaus; // Gaussian lookup table for signal generation
- Int_t fNcomps; // Number of samplings along the gaussian
-
- Int_t fMinVal; // Min value used in 2D zero-suppression algo
-
- Bool_t fWrite; // Write option for the compression algorithms
- Bool_t fBitComp; // 10 to 8 bit compression option
+ private:
+ AliITSresponseSDD(const AliITSresponseSDD &ob); // copy constructor
+ AliITSresponseSDD& operator=(const AliITSresponseSDD & /* source */); // ass. op.
- TString fOption; // Zero-suppresion option (1D, 2D or none)
- TString fParam1; // Read baselines from file option
- TString fParam2; // Read compression algo thresholds from file
-
- TString fDataType; // data type - real or simulated
- TString fFileName1; // input keys : run, module #
- TString fFileName2; // baseline & noise val or output coded // signal or monitored bgr.
- TString fFileName3; // param values or output coded signal
-
- ClassDef(AliITSresponseSDD,2) // SDD response
-};
-#endif
+ ClassDef(AliITSresponseSDD,3) // SDD response
+
+ };
+#endif
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff