* about the suitability of this software for any purpose. It is *
* provided "as is" without express or implied warranty. *
**************************************************************************/
+
/* $Id$ */
#include <stdio.h>
#include <stdlib.h>
-#include <iostream.h>
-#include <iomanip.h>
+#include <Riostream.h>
#include <TObjArray.h>
-#include <TRandom.h>
-#include <TMath.h>
-
#include "AliITSmodule.h"
#include "AliITSMapA2.h"
+#include "AliITSpList.h"
+#include "AliITSCalibrationSSD.h"
#include "AliITSsegmentationSSD.h"
-#include "AliITSresponseSSD.h"
-#include "AliITSdcsSSD.h"
+//#include "AliITSdcsSSD.h"
#include "AliITS.h"
+#include "AliITShit.h"
+#include "AliITSdigitSSD.h"
#include "AliRun.h"
#include "AliITSgeom.h"
#include "AliITSsimulationSSD.h"
+#include "AliITSTableSSD.h"
+//#include "AliITSresponseSSD.h"
-ClassImp(AliITSsimulationSSD);
+ClassImp(AliITSsimulationSSD)
+////////////////////////////////////////////////////////////////////////
+// //
+// Author: Enrico Fragiacomo //
+// enrico.fragiacomo@ts.infn.it //
+// Last revised: march 2006 //
+// //
+// AliITSsimulationSSD is the simulation of SSD. //
////////////////////////////////////////////////////////////////////////
-// Version: 0
-// Written by Enrico Fragiacomo
-// July 2000
-//
-// AliITSsimulationSSD is the simulation of SSDs.
//----------------------------------------------------------------------
-AliITSsimulationSSD::AliITSsimulationSSD(){
+AliITSsimulationSSD::AliITSsimulationSSD():AliITSsimulation(),
+ //fDCS(0),
+fMapA2(0),
+fIonE(0.0),
+fDifConst(),
+fDriftVel(){
//default Constructor
-
- fDCS = 0;
- fNstrips = GetSegmentation()->Npx();
- fPitch = GetSegmentation()->Dpx(0);
- fDifConst[0] = fDifConst[1] = 0.0;
- fDriftVel[0] = fDriftVel[1] = 0.0;
- fMapA2 = 0;
+ //Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // A default construction AliITSsimulationSSD class
+}
+//----------------------------------------------------------------------
+AliITSsimulationSSD::AliITSsimulationSSD(AliITSDetTypeSim* dettyp):
+AliITSsimulation(dettyp),
+//fDCS(0),
+fMapA2(0),
+fIonE(0.0),
+fDifConst(),
+fDriftVel(){
+ // Constructor
+ // Input:
+ // AliITSDetTypeSim Pointer to the SSD dettype to be used
+ // Outputs:
+ // none.
+ // Return
+ // A standard constructed AliITSsimulationSSD class
+
+ Init();
}
//----------------------------------------------------------------------
-AliITSsimulationSSD::AliITSsimulationSSD(AliITSsegmentation *seg,
- AliITSresponse *resp){
- // Constructor
-
- fSegmentation = seg;
- fResponse = resp;
- Float_t noise[2] = {0.,0.};
- fResponse->GetNoiseParam(noise[0],noise[1]); // retrieves noise parameters
- fDCS = new AliITSdcsSSD(seg,resp);
-
- fNstrips = GetSegmentation()->Npx();
- fPitch = GetSegmentation()->Dpx(0);
- SetDriftVelocity(); // use default values in .h file
- SetIonizeE(); // use default values in .h file
- SetDiffConst(); // use default values in .h file
- fMapA2 = new AliITSMapA2(fSegmentation);
+void AliITSsimulationSSD::Init(){
+ // Inilizer, Inilizes all of the variable as needed in a standard place.
+ // Input:
+ // AliITSsegmentationSSD *seg Pointer to the SSD segmentation to be used
+ // AliITSCalibrationSSD *resp Pointer to the SSD responce class to be used
+ // Outputs:
+ // none.
+ // Return
+ // none.
+ AliITSsegmentationSSD* seg = (AliITSsegmentationSSD*)GetSegmentationModel(2);
+
+ SetDriftVelocity(); // use default values in .h file
+ SetIonizeE(); // use default values in .h file
+ SetDiffConst(); // use default values in .h file
+ fpList = new AliITSpList(2,GetNStrips());
+ fMapA2 = new AliITSMapA2(seg);
}
//______________________________________________________________________
AliITSsimulationSSD& AliITSsimulationSSD::operator=(
- const AliITSsimulationSSD &s){
- // Operator =
-
- if(this==&s) return *this;
-
- this->fDCS = new AliITSdcsSSD(*(s.fDCS));
- this->fMapA2 = s.fMapA2;
- this->fNstrips = s.fNstrips;
- this->fPitch = s.fPitch;
- this->fIonE = s.fIonE;
- this->fDifConst[0] = s.fDifConst[0];
- this->fDifConst[1] = s.fDifConst[1];
- this->fDriftVel[0] = s.fDriftVel[0];
- this->fDriftVel[1] = s.fDriftVel[1];
- return *this;
+ const AliITSsimulationSSD &s){
+ // Operator =
+
+ if(this==&s) return *this;
+
+ // this->fDCS = new AliITSdcsSSD(*(s.fDCS));
+ this->fMapA2 = s.fMapA2;
+ this->fIonE = s.fIonE;
+ this->fDifConst[0] = s.fDifConst[0];
+ this->fDifConst[1] = s.fDifConst[1];
+ this->fDriftVel[0] = s.fDriftVel[0];
+ this->fDriftVel[1] = s.fDriftVel[1];
+ return *this;
+}
+//______________________________________________________________________
+AliITSsimulation& AliITSsimulationSSD::operator=(
+ const AliITSsimulation &s){
+ // Operator =
+
+ if(this==&s) return *this;
+ Error("AliITSsimulationSSD","Not allowed to make a = with "
+ "AliITSsimulationSSD Using default creater instead");
+
+ return *this;
}
//______________________________________________________________________
-AliITSsimulationSSD::AliITSsimulationSSD(const AliITSsimulationSSD &source){
- // copy constructor
+AliITSsimulationSSD::AliITSsimulationSSD(const AliITSsimulationSSD &source):
+ AliITSsimulation(source){
+ // copy constructor
- *this = source;
+ *this = source;
}
//______________________________________________________________________
AliITSsimulationSSD::~AliITSsimulationSSD() {
- // destructor
- delete fMapA2;
- delete fDCS;
+ // destructor
+ delete fMapA2;
+ //delete fDCS;
+}
+//______________________________________________________________________
+void AliITSsimulationSSD::InitSimulationModule(Int_t module,Int_t event){
+ // Creates maps to build the list of tracks for each sumable digit
+ // Inputs:
+ // Int_t module // Module number to be simulated
+ // Int_t event // Event number to be simulated
+ // Outputs:
+ // none.
+ // Return
+ // none.
+
+ SetModuleNumber(module);
+ SetEventNumber(event);
+ fMapA2->ClearMap();
+ fpList->ClearMap();
+}
+//______________________________________________________________________
+void AliITSsimulationSSD::FinishSDigitiseModule(){
+ // Does the Sdigits to Digits work
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
+
+ FillMapFrompList(fpList); // need to check if needed here or not????
+ SDigitToDigit(fModule,fpList);
+ fpList->ClearMap();
+ fMapA2->ClearMap();
+}
+//______________________________________________________________________
+void AliITSsimulationSSD::DigitiseModule(AliITSmodule *mod,Int_t,Int_t) {
+ // Digitizes hits for one SSD module
+ SetModuleNumber(mod->GetIndex());
+
+ HitsToAnalogDigits(mod,fpList);
+ SDigitToDigit(GetModuleNumber(),fpList);
+
+ fpList->ClearMap();
+ fMapA2->ClearMap();
}
//______________________________________________________________________
-void AliITSsimulationSSD::DigitiseModule(AliITSmodule *mod,Int_t module,
- Int_t dummy) {
- // Digitizes hits for one SSD module
+void AliITSsimulationSSD::SDigitiseModule(AliITSmodule *mod,Int_t,Int_t) {
+ // Produces Summable/Analog digits and writes them to the SDigit tree.
- Int_t lay, lad, detect;
- AliITS *aliITS = (AliITS*)gAlice->GetModule("ITS");
- AliITSgeom *geom = aliITS->GetITSgeom();
- geom->GetModuleId(module,lay, lad, detect);
- if ( lay == 6 ) GetSegmentation()->SetLayer(6);
- if ( lay == 5 ) GetSegmentation()->SetLayer(5);
+ HitsToAnalogDigits(mod,fpList);
+ WriteSDigits(fpList);
+
+ fpList->ClearMap();
+ fMapA2->ClearMap();
+}
+//______________________________________________________________________
+void AliITSsimulationSSD::SDigitToDigit(Int_t module,AliITSpList *pList){
+ // Takes the pList and finishes the digitization.
+
+ ApplyNoise(pList,module);
+ ApplyCoupling(pList,module);
+ ApplyDeadChannels(module);
+
+ ChargeToSignal(module,pList);
+}
+//______________________________________________________________________
+void AliITSsimulationSSD::HitsToAnalogDigits(AliITSmodule *mod,
+ AliITSpList *pList){
+ // Loops over all hits to produce Analog/floating point digits. This
+ // is also the first task in producing standard digits.
+ Int_t lasttrack = -2;
+ Int_t idtrack = -2;
+ Double_t x0=0.0, y0=0.0, z0=0.0;
+ Double_t x1=0.0, y1=0.0, z1=0.0;
+ Double_t de=0.0;
+ Int_t module = mod->GetIndex();
+
+ AliITSsegmentationSSD* seg = (AliITSsegmentationSSD*)GetSegmentationModel(2);
+
TObjArray *hits = mod->GetHits();
Int_t nhits = hits->GetEntriesFast();
- if (!nhits) return;
-
- Double_t x0=0.0, y0=0.0, z0=0.0;
- Double_t x1=0.0, y1=0.0, z1=0.0;
- Double_t de=0.0;
- Int_t maxNdigits = 2*fNstrips;
- Float_t **pList = new Float_t* [maxNdigits];
- memset(pList,0,sizeof(Float_t*)*maxNdigits);
- Int_t indexRange[4] = {0,0,0,0};
- static Bool_t first = kTRUE;
- Int_t lasttrack = -2;
- Int_t idtrack = -2;
-
+ if (nhits<=0) return;
+ AliITSTableSSD * tav = new AliITSTableSSD(GetNStrips());
+ module = mod->GetIndex();
+ if ( mod->GetLayer() == 6 ) seg->SetLayer(6);
+ if ( mod->GetLayer() == 5 ) seg->SetLayer(5);
for(Int_t i=0; i<nhits; i++) {
- // LineSegmentL returns 0 if the hit is entering
- // If hits is exiting returns positions of entering and exiting hits
- // Returns also energy loss
-
- if (mod->LineSegmentL(i, x0, x1, y0, y1, z0, z1, de, idtrack)) {
- HitToDigit(module, x0, y0, z0, x1, y1, z1, de, indexRange, first);
-
- if (lasttrack != idtrack || i==(nhits-1)) {
- GetList(idtrack,pList,indexRange);
- first=kTRUE;
- } // end if
- lasttrack=idtrack;
+ // LineSegmentL returns 0 if the hit is entering
+ // If hits is exiting returns positions of entering and exiting hits
+ // Returns also energy loss
+ if(GetDebug(4)){
+ cout << i << " ";
+ cout << mod->GetHit(i)->GetXL() << " "<<mod->GetHit(i)->GetYL();
+ cout << " " << mod->GetHit(i)->GetZL();
+ cout << endl;
+ } // end if
+ if (mod->LineSegmentL(i, x0, x1, y0, y1, z0, z1, de, idtrack)) {
+ HitToDigit(module, x0, y0, z0, x1, y1, z1, de,tav);
+ if (lasttrack != idtrack || i==(nhits-1)) {
+ GetList(idtrack,i,module,pList,tav);
} // end if
+ lasttrack=idtrack;
+ } // end if
} // end loop over hits
-
- ApplyNoise();
- ApplyCoupling();
-
- ChargeToSignal(pList);
-
- fMapA2->ClearMap();
+ delete tav; tav=0;
+ return;
}
//----------------------------------------------------------------------
void AliITSsimulationSSD::HitToDigit(Int_t module, Double_t x0, Double_t y0,
- Double_t z0, Double_t x1, Double_t y1,
- Double_t z1, Double_t de,
- Int_t *indexRange, Bool_t first) {
- // Turns hits in SSD module into one or more digits.
-
- Float_t tang[2] = {0.0,0.0};
- GetSegmentation()->Angles(tang[0], tang[1]);//stereo<<->tan(stereo)~=stereo
- Double_t x, y, z;
- Double_t dex=0.0, dey=0.0, dez=0.0;
- Double_t pairs; // pair generation energy per step.
- Double_t sigma[2] = {0.,0.};// standard deviation of the diffusion gaussian
- Double_t tdrift[2] = {0.,0.}; // time of drift
- Double_t w;
- Double_t inf[2], sup[2], par0[2];
-
- // Steps in the module are determined "manually" (i.e. No Geant)
- // NumOfSteps divide path between entering and exiting hits in steps
- Int_t numOfSteps = NumOfSteps(x1, y1, z1, dex, dey, dez);
+ Double_t z0, Double_t x1, Double_t y1,
+ Double_t z1, Double_t de,
+ AliITSTableSSD *tav) {
- // Enery loss is equally distributed among steps
- de = de/numOfSteps;
- pairs = de/GetIonizeE(); // e-h pairs generated
-
- for(Int_t j=0; j<numOfSteps; j++) { // stepping
- x = x0 + (j+0.5)*dex;
- y = y0 + (j+0.5)*dey;
- if ( y > (GetSegmentation()->Dy()/2+10)*1.0E-4 ) {
- // check if particle is within the detector
- cout<<"AliITSsimulationSSD::HitToDigit: Warning: hit "
- "out of detector y0,y,dey,j ="
- <<y0<<","<<y<<","<<dey<<","<<j<<endl;
- return;
- } // end if
- z = z0 + (j+0.5)*dez;
-
- // calculate drift time
- // y is the minimum path
- tdrift[0] = (y+(GetSegmentation()->Dy()*1.0E-4)/2)/GetDriftVelocity(0);
- tdrift[1] = ((GetSegmentation()->Dy()*1.0E-4)/2-y)/GetDriftVelocity(1);
-
- for(Int_t k=0; k<2; k++) { // both sides remember: 0=Pside 1=Nside
-
- tang[k]=TMath::Tan(tang[k]);
-
- // w is the coord. perpendicular to the strips
- if(k==0) {
- w = (x+(GetSegmentation()->Dx()*1.0E-4)/2) -
- (z+(GetSegmentation()->Dz()*1.0E-4)/2)*tang[k];
- }else{
- w = (x+(GetSegmentation()->Dx()*1.0E-4)/2) +
- (z-(GetSegmentation()->Dz()*1.0E-4)/2)*tang[k];
- } // end if
- w = w / (fPitch*1.0E-4); // w is converted in units of pitch
-
- if((w<(-0.5)) || (w>(fNstrips-0.5))) {
- // this check rejects hits in regions not covered by strips
- // 0.5 takes into account boundaries
- if(k==0) cout<<"AliITSsimulationSSD::HitToDigit: "
- "Warning: no strip in this region of P side"
- <<endl;
- else cout<<"AliITSsimulationSSD::HitToDigit: "
- "Warning: no strip in this region of N side"<<endl;
- return;
- } // end if
-
- // sigma is the standard deviation of the diffusion gaussian
- if(tdrift[k]<0) return;
- sigma[k] = TMath::Sqrt(2*GetDiffConst(k)*tdrift[k]);
- sigma[k] = sigma[k] /(fPitch*1.0E-4); //units of Pitch
- if(sigma[k]==0.0) {
- cout<<"AliITSsimulationSSD::DigitiseModule: Error: sigma=0"
- <<endl;
- exit(0);
- } // end if
-
- par0[k] = pairs;
- // we integrate the diffusion gaussian from -3sigma to 3sigma
- inf[k] = w - 3*sigma[k]; // 3 sigma from the gaussian average
- sup[k] = w + 3*sigma[k]; // 3 sigma from the gaussian average
- // IntegrateGaussian does the actual
- // integration of diffusion gaussian
- IntegrateGaussian(k, par0[k], w, sigma[k], inf[k], sup[k],
- indexRange, first);
- } // end for loop over side (0=Pside, 1=Nside)
- } // end stepping
- //delete seg;
+ // hit to digit conversion
+
+ AliITSsegmentationSSD* seg = (AliITSsegmentationSSD*)GetSegmentationModel(2);
+ // Turns hits in SSD module into one or more digits.
+ Float_t tang[2] = {0.0,0.0};
+ seg->Angles(tang[0], tang[1]);//stereo<<->tan(stereo)~=stereo
+ Double_t x, y, z;
+ Double_t dex=0.0, dey=0.0, dez=0.0;
+ Double_t pairs; // pair generation energy per step.
+ Double_t sigma[2] = {0.,0.};// standard deviation of the diffusion gaussian
+ Double_t tdrift[2] = {0.,0.}; // time of drift
+ Double_t w;
+ Double_t inf[2], sup[2], par0[2];
+
+ // Steps in the module are determined "manually" (i.e. No Geant)
+ // NumOfSteps divide path between entering and exiting hits in steps
+ Int_t numOfSteps = NumOfSteps(x1, y1, z1, dex, dey, dez);
+ // Enery loss is equally distributed among steps
+ de = de/numOfSteps;
+ pairs = de/GetIonizeE(); // e-h pairs generated
+ for(Int_t j=0; j<numOfSteps; j++) { // stepping
+ x = x0 + (j+0.5)*dex;
+ y = y0 + (j+0.5)*dey;
+ if ( y > (seg->Dy()/2+10)*1.0E-4 ) {
+ // check if particle is within the detector
+ Warning("HitToDigit",
+ "hit out of detector y0=%e,y=%e,dey=%e,j =%e module=%d",
+ y0,y,dey,j,module);
+ return;
+ } // end if
+ z = z0 + (j+0.5)*dez;
+ if(GetDebug(4)) cout <<"HitToDigit "<<x<<" "<<y<<" "<<z<< " "
+ <<dex<<" "<<dey<<" "<<dez<<endl;
+ // calculate drift time
+ // y is the minimum path
+ tdrift[0] = (y+(seg->Dy()*1.0E-4)/2)/GetDriftVelocity(0);
+ tdrift[1] = ((seg->Dy()*1.0E-4)/2-y)/GetDriftVelocity(1);
+
+ for(Int_t k=0; k<2; k++) { // both sides remember: 0=Pside 1=Nside
+
+ tang[k]=TMath::Tan(tang[k]);
+
+ // w is the coord. perpendicular to the strips
+ Float_t xp=x*1.e+4,zp=z*1.e+4; // microns
+ seg->GetPadTxz(xp,zp);
+ if(k==0) w = xp; // P side strip number
+ else w = zp; // N side strip number
+
+ if((w<(-0.5)) || (w>(GetNStrips()-0.5))) {
+ // this check rejects hits in regions not covered by strips
+ // 0.5 takes into account boundaries
+ if(GetDebug(4)) cout << "x,z="<<x<<","<<z<<" w="<<w
+ <<" Nstrips="<<GetNStrips()<<endl;
+ return; // There are dead region on the SSD sensitive volume.
+ } // end if
+
+ // sigma is the standard deviation of the diffusion gaussian
+ if(tdrift[k]<0) return;
+ sigma[k] = TMath::Sqrt(2*GetDiffConst(k)*tdrift[k]);
+ sigma[k] /= (GetStripPitch()*1.0E-4); //units of Pitch
+ if(sigma[k]==0.0) {
+ Error("HitToDigit"," sigma[%d]=0",k);
+ exit(0);
+ } // end if
+
+ par0[k] = pairs;
+ // we integrate the diffusion gaussian from -3sigma to 3sigma
+ inf[k] = w - 3*sigma[k]; // 3 sigma from the gaussian average
+ sup[k] = w + 3*sigma[k]; // 3 sigma from the gaussian average
+ // IntegrateGaussian does the actual
+ // integration of diffusion gaussian
+ IntegrateGaussian(k, par0[k], w, sigma[k], inf[k], sup[k],tav);
+ } // end for loop over side (0=Pside, 1=Nside)
+ } // end stepping
}
+
//______________________________________________________________________
-void AliITSsimulationSSD::ApplyNoise() {
- // Apply Noise.
+void AliITSsimulationSSD::ApplyNoise(AliITSpList *pList,Int_t module){
+ // Apply Noise.
+ Int_t ix;
+ Double_t signal,noise;
+ AliITSCalibrationSSD* res =(AliITSCalibrationSSD*)GetCalibrationModel(module);
+
+ // Pside
+ for(ix=0;ix<GetNStrips();ix++){ // loop over strips
+
+ // noise is gaussian
+ noise = (Double_t) gRandom->Gaus(0,res->GetNoiseP().At(ix));
+
+ // need to calibrate noise
+ // NOTE. noise from the calibration database comes uncalibrated,
+ // it needs to be calibrated in order to be added
+ // to the signal. It will be decalibrated later on together with the noise
+ noise *= (Double_t) res->GetGainP(ix);
+
+ // noise comes in ADC channels from the calibration database
+ // It needs to be converted back to electronVolts
+ noise /= res->GetDEvToADC(1.);
+
+ // Finally, noise is added to the signal
+ signal = noise + fMapA2->GetSignal(0,ix);//get signal from map
+ fMapA2->SetHit(0,ix,signal); // give back signal to map
+ if(signal>0.0) pList->AddNoise(0,ix,module,noise);
+ } // loop over strip
+
+ // Nside
+ for(ix=0;ix<GetNStrips();ix++){ // loop over strips
+ noise = (Double_t) gRandom->Gaus(0,res->GetNoiseN().At(ix));// give noise to signal
+ noise *= (Double_t) res->GetGainN(ix);
+ noise /= res->GetDEvToADC(1.);
+ signal = noise + fMapA2->GetSignal(1,ix);//get signal from map
+ fMapA2->SetHit(1,ix,signal); // give back signal to map
+ if(signal>0.0) pList->AddNoise(1,ix,module,noise);
+ } // loop over strip
- Double_t signal;
- Double_t noise[2] = {0.,0.};
- Float_t a,b;
- fResponse->GetNoiseParam(a,b); // retrieves noise parameters
- noise[0] = (Double_t) a; noise[1] = (Double_t) b;
- for(Int_t k=0;k<2;k++){ // both sides (0=Pside, 1=Nside)
- for(Int_t ix=0;ix<fNstrips;ix++){ // loop over strips
- signal = fMapA2->GetSignal(k,ix); // retrieves signal from map
- signal += gRandom->Gaus(0,noise[k]);// add noise to signal
- if(signal<0.) signal=0.0; // in case noise is negative...
- fMapA2->SetHit(k,ix,signal); // give back signal to map
- } // loop over strip
- } // loop over k (P or N side)
}
//______________________________________________________________________
-void AliITSsimulationSSD::ApplyCoupling() {
- // Apply the effect of electronic coupling between channels
- Double_t signalLeft=0, signalRight=0;
-
- for(Int_t ix=0;ix<fNstrips;ix++){
- if(ix>0.)signalLeft = fMapA2->GetSignal(0,ix-1)*fDCS->GetCouplingPL();
- else signalLeft = 0.0;
- if(ix<(fNstrips-1)) signalRight = fMapA2->GetSignal(0,ix+1)*
- fDCS->GetCouplingPR();
- else signalRight = 0.0;
- fMapA2->AddSignal(0,ix,signalLeft + signalRight);
-
- if(ix>0.) signalLeft = fMapA2->GetSignal(1,ix-1)*fDCS->GetCouplingNL();
- else signalLeft = 0.0;
- if(ix<(fNstrips-1)) signalRight = fMapA2->GetSignal(1,ix+1)*
- fDCS->GetCouplingNR();
- else signalRight = 0.0;
- fMapA2->AddSignal(1,ix,signalLeft + signalRight);
- } // loop over strips
+void AliITSsimulationSSD::ApplyCoupling(AliITSpList *pList,Int_t module) {
+ // Apply the effect of electronic coupling between channels
+ Int_t ix;
+ Double_t signal=0;
+ AliITSCalibrationSSD* res =(AliITSCalibrationSSD*)GetCalibrationModel(module);
+
+ Double_t *contrLeft = new Double_t[GetNStrips()];
+ Double_t *contrRight = new Double_t[GetNStrips()];
+
+ // P side coupling
+ for(ix=0;ix<GetNStrips();ix++){
+ if(ix>0) contrLeft[ix] = fMapA2->GetSignal(0,ix-1)*res->GetCouplingPL();
+ else contrLeft[ix] = 0.0;
+ if(ix<(GetNStrips()-1)) contrRight[ix] = fMapA2->GetSignal(0,ix+1)*res->GetCouplingPR();
+ else contrRight[ix] = 0.0;
+ } // loop over strips
+
+ for(ix=0;ix<GetNStrips();ix++){
+ signal = contrLeft[ix] + contrRight[ix] - res->GetCouplingPL() * fMapA2->GetSignal(0,ix)
+ - res->GetCouplingPR() * fMapA2->GetSignal(0,ix);
+ fMapA2->AddSignal(0,ix,signal);
+ if(signal>0.0) pList->AddNoise(0,ix,module,signal);
+ } // loop over strips
+
+ // N side coupling
+ for(ix=0;ix<GetNStrips();ix++){
+ if(ix>0) contrLeft[ix] = fMapA2->GetSignal(1,ix-1)*res->GetCouplingNL();
+ else contrLeft[ix] = 0.0;
+ if(ix<(GetNStrips()-1)) contrRight[ix] = fMapA2->GetSignal(1,ix+1)*res->GetCouplingNR();
+ else contrRight[ix] = 0.0;
+ } // loop over strips
+
+ for(ix=0;ix<GetNStrips();ix++){
+ signal = contrLeft[ix] + contrRight[ix] - res->GetCouplingNL() * fMapA2->GetSignal(0,ix)
+ - res->GetCouplingNR() * fMapA2->GetSignal(0,ix);
+ fMapA2->AddSignal(1,ix,signal);
+ if(signal>0.0) pList->AddNoise(1,ix,module,signal);
+ } // loop over strips
+
+
+ delete [] contrLeft;
+ delete [] contrRight;
}
+
+//______________________________________________________________________
+void AliITSsimulationSSD::ApplyDeadChannels(Int_t module) {
+ // Kill dead channels setting gain to zero
+
+ Int_t deadentries;
+
+ AliITSCalibrationSSD* res = (AliITSCalibrationSSD*)GetCalibrationModel(module);
+
+ deadentries = res->GetDeadPChannelsList().GetSize();
+ //cout<<module<<" "<<deadentries<<endl;
+ for(Int_t i=0; i<deadentries; i++) {
+ res->AddGainP(res->GetDeadPChannelsList().At(i),0.0);
+ }
+
+ deadentries = res->GetDeadNChannelsList().GetSize();
+ for(Int_t i=0; i<deadentries; i++) {
+ res->AddGainN(res->GetDeadNChannelsList().At(i),0.0);
+ }
+
+}
+
//______________________________________________________________________
Float_t AliITSsimulationSSD::F(Float_t av, Float_t x, Float_t s) {
// Computes the integral of a gaussian using Error Function
}
//______________________________________________________________________
void AliITSsimulationSSD::IntegrateGaussian(Int_t k,Double_t par, Double_t w,
- Double_t sigma,
- Double_t inf, Double_t sup,
- Int_t *indexRange, Bool_t first) {
+ Double_t sigma,
+ Double_t inf, Double_t sup,
+ AliITSTableSSD *tav) {
// integrate the diffusion gaussian
// remind: inf and sup are w-3sigma and w+3sigma
// we could define them here instead of passing them
// Watch that we only involve at least two strips
// Numbers greater than 2 of strips in a cluster depend on
// geometry of the track and delta rays, not charge diffusion!
-
- Double_t strip = TMath::Floor(w); // clostest strip on the left
-
- if ( TMath::Abs((strip - w)) < 0.5) {
- // gaussian mean is closer to strip on the left
- a = inf; // integration starting point
- if((strip+0.5)<=sup) {
- // this means that the tail of the gaussian goes beyond
- // the middle point between strips ---> part of the signal
- // is given to the strip on the right
- b = strip + 0.5; // integration stopping point
- dXCharge1 = F( w, b, sigma) - F(w, a, sigma);
- dXCharge2 = F( w, sup, sigma) - F(w ,b, sigma);
- }else {
- // this means that all the charge is given to the strip on the left
- b = sup;
- dXCharge1 = 0.9973; // gaussian integral at 3 sigmas
- dXCharge2 = 0.0;
- } // end if
-
- dXCharge1 = par * dXCharge1;// normalize by mean of number of carriers
- dXCharge2 = par * dXCharge2;
- // for the time being, signal is the charge
- // in ChargeToSignal signal is converted in ADC channel
- fMapA2->AddSignal(k,strip,dXCharge1);
- if(((Int_t) strip) < (fNstrips-1)) {
- // strip doesn't have to be the last (remind: last=fNstrips-1)
- // otherwise part of the charge is lost
- fMapA2->AddSignal(k,(strip+1),dXCharge2);
- } // end if
-
- if(dXCharge1 > 1.) {
- if (first) {
- indexRange[k*2+0] = indexRange[k*2+1]=(Int_t) strip;
- first=kFALSE;
- } // end if first
-
- indexRange[k*2+0]=TMath::Min(indexRange[k*2+0],(Int_t) strip);
- indexRange[k*2+1]=TMath::Max(indexRange[k*2+1],(Int_t) strip);
- } // dXCharge > 1 e-
+ Double_t strip = TMath::Floor(w); // closest strip on the left
+ if ( TMath::Abs((strip - w)) < 0.5) {
+ // gaussian mean is closer to strip on the left
+ a = inf; // integration starting point
+ if((strip+0.5)<=sup) {
+ // this means that the tail of the gaussian goes beyond
+ // the middle point between strips ---> part of the signal
+ // is given to the strip on the right
+ b = strip + 0.5; // integration stopping point
+ dXCharge1 = F( w, b, sigma) - F(w, a, sigma);
+ dXCharge2 = F( w, sup, sigma) - F(w ,b, sigma);
+ }else {
+ // this means that all the charge is given to the strip on the left
+ b = sup;
+ dXCharge1 = 0.9973; // gaussian integral at 3 sigmas
+ dXCharge2 = 0.0;
+ } // end if
+ dXCharge1 = par * dXCharge1;// normalize by mean of number of carriers
+ dXCharge2 = par * dXCharge2;
+
+ // for the time being, signal is the charge
+ // in ChargeToSignal signal is converted in ADC channel
+ fMapA2->AddSignal(k,(Int_t)strip,dXCharge1);
+ tav->Add(k,(Int_t)strip);
+ if(((Int_t) strip) < (GetNStrips()-1)) {
+ // strip doesn't have to be the last (remind: last=GetNStrips()-1)
+ // otherwise part of the charge is lost
+ fMapA2->AddSignal(k,((Int_t)strip+1),dXCharge2);
+ tav->Add(k,((Int_t)(strip+1)));
+ } // end if
}else{
- // gaussian mean is closer to strip on the right
- strip++; // move to strip on the rigth
- b = sup; // now you know where to stop integrating
- if((strip-0.5)>=inf) {
- // tail of diffusion gaussian on the left goes left of
- // middle point between strips
- a = strip - 0.5; // integration starting point
- dXCharge1 = F(w, b, sigma) - F(w, a, sigma);
- dXCharge2 = F(w, a, sigma) - F(w, inf, sigma);
- }else {
- a = inf;
- dXCharge1 = 0.9973; // gaussian integral at 3 sigmas
- dXCharge2 = 0.0;
- } // end if
-
- dXCharge1 = par * dXCharge1; // normalize by means of carriers
- dXCharge2 = par * dXCharge2;
-
- // for the time being, signal is the charge
- // in ChargeToSignal signal is converted in ADC channel
- fMapA2->AddSignal(k,strip,dXCharge1);
- if(((Int_t) strip) > 0) {
- // strip doesn't have to be the first
- // otherwise part of the charge is lost
- fMapA2->AddSignal(k,(strip-1),dXCharge2);
- } // end if
-
- if(dXCharge1 > 1.) {
- if (first) {
- indexRange[k*2+0]=indexRange[k*2+1]=(Int_t) strip;
- first=kFALSE;
- } // end if first
-
- indexRange[k*2+0]=TMath::Min(indexRange[k*2+0],(Int_t) strip);
- indexRange[k*2+1]=TMath::Max(indexRange[k*2+1],(Int_t) strip);
- } // dXCharge > 1 e-
+ // gaussian mean is closer to strip on the right
+ strip++; // move to strip on the rigth
+ b = sup; // now you know where to stop integrating
+ if((strip-0.5)>=inf) {
+ // tail of diffusion gaussian on the left goes left of
+ // middle point between strips
+ a = strip - 0.5; // integration starting point
+ dXCharge1 = F(w, b, sigma) - F(w, a, sigma);
+ dXCharge2 = F(w, a, sigma) - F(w, inf, sigma);
+ }else {
+ a = inf;
+ dXCharge1 = 0.9973; // gaussian integral at 3 sigmas
+ dXCharge2 = 0.0;
+ } // end if
+ dXCharge1 = par * dXCharge1; // normalize by means of carriers
+ dXCharge2 = par * dXCharge2;
+ // for the time being, signal is the charge
+ // in ChargeToSignal signal is converted in ADC channel
+ fMapA2->AddSignal(k,(Int_t)strip,dXCharge1);
+ tav->Add(k,(Int_t)strip);
+ if(((Int_t) strip) > 0) {
+ // strip doesn't have to be the first
+ // otherwise part of the charge is lost
+ fMapA2->AddSignal(k,((Int_t)strip-1),dXCharge2);
+ tav->Add(k,((Int_t)(strip-1)));
+ } // end if
} // end if
}
//______________________________________________________________________
Int_t AliITSsimulationSSD::NumOfSteps(Double_t x, Double_t y, Double_t z,
- Double_t & dex,Double_t & dey,Double_t & dez){
+ Double_t &dex,Double_t &dey,
+ Double_t &dez){
// number of steps
// it also returns steps for each coord
//AliITSsegmentationSSD *seg = new AliITSsegmentationSSD();
Int_t numOfSteps = (Int_t) (TMath::Sqrt(x*x+y*y+z*z)/step);
if (numOfSteps < 1) numOfSteps = 1; // one step, at least
+ //numOfSteps=1;
// we could condition the stepping depending on the incident angle
// of the track
dex = x/numOfSteps;
dey = y/numOfSteps;
dez = z/numOfSteps;
-
+
return numOfSteps;
}
//----------------------------------------------------------------------
-void AliITSsimulationSSD::GetList(Int_t label,Float_t **pList,
- Int_t *indexRange) {
+void AliITSsimulationSSD::GetList(Int_t label,Int_t hit,Int_t mod,
+ AliITSpList *pList,AliITSTableSSD *tav) {
// loop over nonzero digits
- Int_t ix,globalIndex;
- Float_t signal=0.;
- Float_t highest,middle,lowest;
+ Int_t ix,i;
+ Double_t signal=0.;
for(Int_t k=0; k<2; k++) {
- for(ix=indexRange[k*2+0];ix<indexRange[k*2+1]+1;ix++){
- if(indexRange[k*2+0]<indexRange[k*2+1])
- signal = fMapA2->GetSignal(k,ix);
-
- globalIndex = k*fNstrips+ix; // globalIndex starts from 0!
- if(!pList[globalIndex]){
- //
- //Create new list (6 elements-3 signals and 3 tracks+total sig)
- //
- pList[globalIndex] = new Float_t [6];
- // set list to -1
- *pList[globalIndex] = -2.;
- *(pList[globalIndex]+1) = -2.;
- *(pList[globalIndex]+2) = -2.;
- *(pList[globalIndex]+3) = 0.;
- *(pList[globalIndex]+4) = 0.;
- *(pList[globalIndex]+5) = 0.;
- *pList[globalIndex] = (float)label;
- *(pList[globalIndex]+3) = signal;
- }else{
- // check the signal magnitude
- highest = *(pList[globalIndex]+3);
- middle = *(pList[globalIndex]+4);
- lowest = *(pList[globalIndex]+5);
- signal -= (highest+middle+lowest);
- //
- // compare the new signal with already existing list
- //
- if(signal<lowest) continue; // neglect this track
- if (signal>highest){
- *(pList[globalIndex]+5) = middle;
- *(pList[globalIndex]+4) = highest;
- *(pList[globalIndex]+3) = signal;
- *(pList[globalIndex]+2) = *(pList[globalIndex]+1);
- *(pList[globalIndex]+1) = *pList[globalIndex];
- *pList[globalIndex] = label;
- }else if (signal>middle){
- *(pList[globalIndex]+5) = middle;
- *(pList[globalIndex]+4) = signal;
- *(pList[globalIndex]+2) = *(pList[globalIndex]+1);
- *(pList[globalIndex]+1) = label;
- }else{
- *(pList[globalIndex]+5) = signal;
- *(pList[globalIndex]+2) = label;
- } // end if
- } // end if
- } // end of loop pixels in x
- } // end of loop over pixels in z
+ ix=tav->Use(k);
+ while(ix>-1){
+ signal = fMapA2->GetSignal(k,ix);
+ if(signal==0.0) {
+ ix=tav->Use(k);
+ continue;
+ } // end if signal==0.0
+ // check the signal magnitude
+ for(i=0;i<pList->GetNSignals(k,ix);i++){
+ signal -= pList->GetTSignal(k,ix,i);
+ } // end for i
+ // compare the new signal with already existing list
+ if(signal>0)pList->AddSignal(k,ix,label,hit,mod,signal);
+ ix=tav->Use(k);
+ } // end of loop on strips
+ } // end of loop on P/N side
+ tav->Clear();
}
//----------------------------------------------------------------------
-void AliITSsimulationSSD::ChargeToSignal(Float_t **pList) {
+void AliITSsimulationSSD::ChargeToSignal(Int_t module,AliITSpList *pList) {
// charge to signal
- AliITS *aliITS = (AliITS*)gAlice->GetModule("ITS");
+ static AliITS *aliITS = (AliITS*)gAlice->GetModule("ITS");
Float_t threshold = 0.;
- Int_t digits[3], tracks[3],hits[3],gi,j1;
- Float_t charges[3];
- Float_t signal,phys;
- Float_t noise[2] = {0.,0.};
+ Int_t size = AliITSdigitSSD::GetNTracks();
+ Int_t * digits = new Int_t[size];
+ Int_t * tracks = new Int_t[size];
+ Int_t * hits = new Int_t[size];
+ Int_t j1;
+ Float_t charges[3] = {0.0,0.0,0.0};
+ Float_t signal;
+ AliITSCalibrationSSD* res =(AliITSCalibrationSSD*)GetCalibrationModel(module);
- fResponse->GetNoiseParam(noise[0],noise[1]);
-
for(Int_t k=0;k<2;k++){ // both sides (0=Pside, 1=Nside)
-
- // Threshold for zero-suppression
- // It can be defined in AliITSresponseSSD
- // threshold = (Float_t)fResponse->MinVal(k);
- // I prefer to think adjusting the threshold "manually", looking
- // at the scope, and considering noise standard deviation
- threshold = 4.0*noise[k]; // 4 times noise is a choice
- for(Int_t ix=0;ix<fNstrips;ix++){ // loop over strips
-
- signal = (Float_t) fMapA2->GetSignal(k,ix);
- gi =k*fNstrips+ix; // global index
- if (signal > threshold) {
- digits[0]=k;
- digits[1]=ix;
-
- // convert to ADC signal
- // conversion factor are rather arbitrary (need tuning)
- // minimum ionizing particle--> ~30000 pairs--> ADC channel 50
- signal = signal*50.0/30000.0;
- if(signal>1000.) signal = 1000.0;//if exceeding, accumulate
- // last one
- digits[2]=(Int_t) signal;
- for(j1=0;j1<3;j1++){
- if (pList[gi]) {
- tracks[j1] = (Int_t)(*(pList[gi]+j1));
- } else {
- tracks[j1]=-2; //noise
- } // end if pList
- charges[j1] = 0;
- } // end for j1
-
- phys=0;
-
- hits[0]=0;
- hits[1]=0;
- hits[2]=0;
- // finally add digit
- aliITS->AddSimDigit(2,phys,digits,tracks,hits,charges);
- } // end if signal > threshold
- if(pList[gi]) delete [] pList[gi];
- } // end for ix
+ for(Int_t ix=0;ix<GetNStrips();ix++){ // loop over strips
+
+ // if strip is dead -> gain=0
+ if( ((k==0)&&(res->GetGainP(ix)==0)) || ((k==1)&&(res->GetGainN(ix)==0))) continue;
+
+ // signal has to be uncalibrated
+ // In real life, gains are supposed to be calculated from calibration runs,
+ // stored in the calibration DB and used in the reconstruction
+ // (see AliITSClusterFinderSSD.cxx)
+ if(k==0) signal /= res->GetGainP(ix);
+ else signal /= res->GetGainN(ix);
+
+ // signal is converted in unit of ADC
+ signal = res->GetDEvToADC(fMapA2->GetSignal(k,ix));
+ if(signal>4096.) signal = 4096.;//if exceeding, accumulate last one
+
+ // threshold for zero suppression is set on the basis of the noise
+ // A good value is 3*sigma_noise
+ if(k==0) threshold = res->GetNoiseP().At(ix);
+ else threshold = res->GetNoiseN().At(ix);
+ threshold *= res->GetZSThreshold(); // threshold at 3 sigma noise
+ if(signal < threshold) continue;
+
+ digits[0] = k;
+ digits[1] = ix;
+ digits[2] = TMath::Nint(signal);
+ for(j1=0;j1<size;j1++)if(j1<pList->GetNEntries()){
+ // only three in digit.
+ tracks[j1] = pList->GetTrack(k,ix,j1);
+ hits[j1] = pList->GetHit(k,ix,j1);
+ }else{
+ tracks[j1] = -3;
+ hits[j1] = -1;
+ } // end for j1
+ // finally add digit
+ aliITS->AddSimDigit(2,0,digits,tracks,hits,charges);
+ } // end for ix
} // end for k
- delete [] pList;
+ delete [] digits;
+ delete [] tracks;
+ delete [] hits;
+}
+//______________________________________________________________________
+void AliITSsimulationSSD::WriteSDigits(AliITSpList *pList){
+ // Fills the Summable digits Tree
+ Int_t i,ni,j,nj;
+ static AliITS *aliITS = (AliITS*)gAlice->GetModule("ITS");
+
+ pList->GetMaxMapIndex(ni,nj);
+ for(i=0;i<ni;i++)for(j=0;j<nj;j++){
+ if(pList->GetSignalOnly(i,j)>0.0){
+ aliITS->AddSumDigit(*(pList->GetpListItem(i,j)));
+ if(GetDebug(4)) cout << "pListSSD: "<<*(pList->GetpListItem(i,j))
+ << endl;
+ } // end if
+ } // end for i,j
+ return;
+}
+//______________________________________________________________________
+void AliITSsimulationSSD::FillMapFrompList(AliITSpList *pList){
+ // Fills fMap2A from the pList of Summable digits
+ Int_t k,ix;
+
+ for(k=0;k<2;k++)for(ix=0;ix<GetNStrips();ix++)
+ fMapA2->AddSignal(k,ix,pList->GetSignal(k,ix));
+ return;
}
//______________________________________________________________________
void AliITSsimulationSSD::Print(ostream *os){
//Standard output format for this class
//AliITSsimulation::Print(os);
- *os << fNstrips <<","<< fPitch <<","<< fIonE <<",";
+ *os << fIonE <<",";
*os << fDifConst[0] <<","<< fDifConst[1] <<",";
*os << fDriftVel[0] <<","<< fDriftVel[1];
//*os <<","; fDCS->Print(os);
// Standard output streaming function.
//AliITSsimulation::Read(is);
- *is >> fNstrips >> fPitch >> fIonE;
+ *is >> fIonE;
*is >> fDifConst[0] >> fDifConst[1];
*is >> fDriftVel[0] >> fDriftVel[1];
//fDCS->Read(is);
source.Read(&os);
return os;
}
+//______________________________________________________________________
+
+
+
+
+