// Variable for Vertical Disalignement of Modules
/////////////////////////////////////////////////////////////////////////////////
const Double_t AliITSv11GeometrySSD::fgkSSDTolerance = 0.0001*fgkmm;
-//const Double_t AliITSv11GeometrySSD::fgkSSDTolerance = 1.*fgkmm;
-const Double_t AliITSv11GeometrySSD::fgkSSDModuleVerticalDisalignment = 0.*fgkmm;
-const Double_t AliITSv11GeometrySSD::fgkSSDModuleVerticalDisalignment2 = 0.2*fgkmm;
+const Double_t AliITSv11GeometrySSD::fgkSSDModuleVerticalDisalignment = 0.2*fgkmm;
+const Double_t AliITSv11GeometrySSD::fgkSSDModuleSideDisalignment = 0.2*fgkmm;
/////////////////////////////////////////////////////////////////////////////////
// Layer5 (lengths are in mm and angles in degrees)
/////////////////////////////////////////////////////////////////////////////////
const Double_t AliITSv11GeometrySSD::fgkSSDSensorSideSupportWidth =
2.000*fgkmm;
const Double_t AliITSv11GeometrySSD::fgkSSDSensorSideSupportHeight[2] =
- { 4.620*fgkmm-fgkSSDModuleVerticalDisalignment2,
- 5.180*fgkmm-fgkSSDModuleVerticalDisalignment2};
+ { 4.620*fgkmm-fgkSSDModuleVerticalDisalignment,
+ 5.220*fgkmm-fgkSSDModuleVerticalDisalignment};
//const Double_t AliITSv11GeometrySSD::fgkSSDSensorSideSupportHeight[2] =
// { 4.520*fgkmm, 5.130*fgkmm};
const Double_t AliITSv11GeometrySSD::fgkSSDSensorSideSupportThickness[2] =
{ 0.014*fgkmm, 0.010*fgkmm, fgkSSDModuleCoolingBlockToSensor
- (fgkSSDSensorSideSupportHeight[1]
- fgkSSDSensorSideSupportHeight[0])
- - fgkSSDModuleVerticalDisalignment2
+ - fgkSSDModuleVerticalDisalignment
- fgkSSDCoolingBlockHoleCenter
- fgkSSDStiffenerHeight
- fgkSSDChipHeight-fgkSSDSensorHeight,
fgkSSDModuleCoolingBlockToSensor
- - fgkSSDModuleVerticalDisalignment2
+ - fgkSSDModuleVerticalDisalignment
- fgkSSDCoolingBlockHoleCenter
- fgkSSDStiffenerHeight
- fgkSSDChipHeight-fgkSSDSensorHeight};
/////////////////////////////////////////////////////////////////////////////////
// Carbon Fiber Lower Support Parameters (lengths are in mm)
/////////////////////////////////////////////////////////////////////////////////
+const Double_t AliITSv11GeometrySSD::fgkLowerSupportToSensorZ = 11.575*fgkmm;
const Double_t AliITSv11GeometrySSD::fgkCarbonFiberLowerSupportWidth
= 0.950*fgkmm;
const Double_t AliITSv11GeometrySSD::fgkCarbonFiberLowerSupportLowerLenght
- fgkSSDMountingBlockHeight[1]
+ 0.5*fgkCoolingTubeSupportHeight
+ fgkSSDModuleCoolingBlockToSensor
- + fgkSSDModuleVerticalDisalignment
- fgkMountingBlockSupportDownHeight,
fgkSSDLay6RadiusMin
- fgkSSDMountingBlockHeight[1]
+ 0.5*fgkCoolingTubeSupportHeight
+ fgkSSDModuleCoolingBlockToSensor
- + fgkSSDModuleVerticalDisalignment
- fgkMountingBlockSupportDownHeight};
const Double_t AliITSv11GeometrySSD::fgkMountingBlockSupportUpHeight[2] = {fgkSSDLay5RadiusMax
- fgkSSDMountingBlockHeight[1]
+ 0.5*fgkCoolingTubeSupportHeight
+ fgkSSDModuleCoolingBlockToSensor
- + fgkSSDModuleVerticalDisalignment
- fgkMountingBlockSupportRadius[0],
fgkSSDLay6RadiusMax
- fgkSSDMountingBlockHeight[1]
+ 0.5*fgkCoolingTubeSupportHeight
+ fgkSSDModuleCoolingBlockToSensor
- + fgkSSDModuleVerticalDisalignment
- fgkMountingBlockSupportRadius[1]};
const Double_t AliITSv11GeometrySSD::fgkLadderSupportHeigth = 10.0*fgkmm; // To be verified
const Double_t AliITSv11GeometrySSD::fgkLadderSupportRingLay5Position = 451.35*fgkmm;
- fgkSSDSensorCenterSupportThickness[0]),
- (fgkSSDModuleCoolingBlockToSensor+0.5*fgkCoolingTubeSupportHeight
- fgkSSDSensorHeight-fgkSSDChipCablesHeight[3]-fgkSSDChipHeight
- - fgkSSDModuleVerticalDisalignment2));
+ - fgkSSDModuleVerticalDisalignment));
fhybridmatrix = new TGeoHMatrix();
for(Int_t i=0; i<khybridmatrixnumber; i++) fhybridmatrix->MultiplyLeft(localhybridtrans[i]);
/////////////////////////////////////////////////////////////
Double_t ssdflexboxlength = fgkSSDFlexFullLength-2.*fgkSSDFlexAngle
* TMath::DegToRad()*ssdflexradiusmax
- fgkSSDFlexLength[2]-TMath::Pi()
- * fgkSSDStiffenerHeight-fgkSSDFlexLength[0];
+ * fgkSSDStiffenerHeight-fgkSSDFlexLength[0]
+ - 0.1*fgkSSDFlexFullLength;
Double_t trans = ssdflexboxlength*CosD(2.*fgkSSDFlexAngle)
+ (ssdflexradiusmax-fgkSSDStiffenerHeight)*SinD(2.*fgkSSDFlexAngle)
+ fgkSSDFlexLength[2];
TGeoTranslation* localssdsensortrans[2];
for(Int_t i=0; i<2; i++) localssdsensortrans[i] = new TGeoTranslation();
localssdsensortrans[0]->SetTranslation(0.5*fgkCarbonFiberTriangleLength,
- - (2.*fgkSSDSensorLength-fgkSSDSensorOverlap)+
- fgkSSDModuleStiffenerPosition[1]+fgkSSDStiffenerWidth
- + 0.5*fgkSSDFlexHoleLength+2.*fgkCarbonFiberJunctionWidth
- - 0.5*(fgkCarbonFiberLowerSupportWidth+fgkSSDSensorCenterSupportLength
- - fgkSSDSensorCenterSupportThickness[0])+0.5*fgkSSDSensorLength,
+ fgkCarbonFiberJunctionWidth
+ - fgkCarbonFiberLowerSupportWidth
+ - fgkLowerSupportToSensorZ,
0.5*fgkSSDSensorHeight-0.5*fgkCoolingTubeSupportHeight
- - fgkSSDModuleCoolingBlockToSensor-0.5*fgkSSDModuleVerticalDisalignment
+ - fgkSSDModuleCoolingBlockToSensor
+ (fgkSSDSensorSideSupportHeight[1]
- - fgkSSDSensorSideSupportHeight[0])
- + 0.5*fgkSSDModuleVerticalDisalignment2);
+ - fgkSSDSensorSideSupportHeight[0]));
localssdsensortrans[1]->SetTranslation(0.5*fgkCarbonFiberTriangleLength,
- - (2.*fgkSSDSensorLength-fgkSSDSensorOverlap)+
- fgkSSDModuleStiffenerPosition[1]+fgkSSDStiffenerWidth
- + 0.5*fgkSSDFlexHoleLength+2.*fgkCarbonFiberJunctionWidth
- - 0.5*(fgkCarbonFiberLowerSupportWidth+fgkSSDSensorCenterSupportLength
- - fgkSSDSensorCenterSupportThickness[0])+0.5*fgkSSDSensorLength,
+ fgkCarbonFiberJunctionWidth
+ - fgkCarbonFiberLowerSupportWidth
+ - fgkLowerSupportToSensorZ,
0.5*fgkSSDSensorHeight-0.5*fgkCoolingTubeSupportHeight
- -fgkSSDModuleCoolingBlockToSensor-0.5*fgkSSDModuleVerticalDisalignment
- + 0.5*fgkSSDModuleVerticalDisalignment2);
+ -fgkSSDModuleCoolingBlockToSensor);
for(Int_t i=0; i<2; i++)
localssdsensorcombitrans[i] = new TGeoCombiTrans(*localssdsensortrans[i],
*localssdsensorrot);
Double_t ssdflexboxlength = fgkSSDFlexFullLength-2.*fgkSSDFlexAngle
* TMath::DegToRad()*ssdflexradiusmax
- fgkSSDFlexLength[2]-TMath::Pi()
- * fgkSSDStiffenerHeight-fgkSSDFlexLength[0];
+ * fgkSSDStiffenerHeight-fgkSSDFlexLength[0]
+ - 0.1*fgkSSDFlexFullLength;
const Int_t knedges = 20;
const Int_t karcnumber = 2;
TVector3* vertexposition[karcnumber*(knedges+1)];
xmothervertex,ymothervertex);
ssdendflexmothershape->DefineSection(0,-0.5*fgkSSDFlexWidth[0]);
ssdendflexmothershape->DefineSection(1, 0.5*fgkSSDFlexWidth[0]);
- TGeoVolume* ssdendflexmother = new TGeoVolume("SSDEndFlexMother",
- ssdendflexmothershape,fSSDAir);
+// TGeoVolume* ssdendflexmother = new TGeoVolume("SSDEndFlexMother",
+// ssdendflexmothershape,fSSDAir);
+ TGeoVolumeAssembly* ssdendflexmother = new TGeoVolumeAssembly("SSDEndFlexMother");
//////////////////////////////////////
// End Flex TGeoXtru Layer Definition
//////////////////////////////////////
- fgkSSDMountingBlockScrewHoleRadius[0];
xvertex[7] = xvertex[6];
yvertex[0] = -0.5*fgkCoolingTubeSupportHeight-fgkSSDModuleCoolingBlockToSensor
- + fgkSSDMountingBlockHeight[1]-0.5*fgkSSDMountingBlockHeight[0]
- - fgkSSDModuleVerticalDisalignment;
+ + fgkSSDMountingBlockHeight[1]-0.5*fgkSSDMountingBlockHeight[0];
yvertex[1] = 0.5*fgkSSDMountingBlockHeight[0];
yvertex[2] = yvertex[1];
yvertex[3] = fgkSSDMountingBlockHeight[1]-yvertex[1];
xmothervertex[8] = -0.25*(fgkSSDMountingBlockLength[0]-fgkSSDMountingBlockLength[1]);
xmothervertex[9] = xmothervertex[8];
ymothervertex[0] = -0.5*fgkCoolingTubeSupportHeight-fgkSSDModuleCoolingBlockToSensor
- + fgkSSDMountingBlockHeight[1]-0.5*fgkSSDMountingBlockHeight[0]
- - fgkSSDModuleVerticalDisalignment;
+ + fgkSSDMountingBlockHeight[1]-0.5*fgkSSDMountingBlockHeight[0];
ymothervertex[1] = 0.5*fgkSSDMountingBlockHeight[0]+fgkMountingBlockClipThickness;
ymothervertex[2] = ymothervertex[1];
ymothervertex[3] = ymothervertex[2]+(fgkSSDMountingBlockHeight[1]
// Ladder Cooling Tubes
coolingtubeshape[0][0] = new TGeoTube(fgkCoolingTubeRmin,fgkCoolingTubeRmax,
0.25 * (fgkSSDSensorLength-2.*fgkSSDModuleStiffenerPosition[1]
- - 2.*fgkSSDCoolingBlockWidth-fgkCoolingTubeSupportWidth));
+ - 2.*fgkSSDCoolingBlockWidth-fgkCoolingTubeSupportWidth)
+ -0.5*fgkSSDTolerance);
coolingtubeshape[0][1] = new TGeoTube(0.0,fgkCoolingTubeRmin,
coolingtubeshape[0][0]->GetDz());
coolingtubeshape[1][0] = new TGeoTube(fgkCoolingTubeRmin,fgkCoolingTubeRmax,
0.5*(fgkSSDModuleStiffenerPosition[1]
- - fgkSSDSensorOverlap));
+ - fgkSSDSensorOverlap-fgkSSDTolerance));
coolingtubeshape[1][1] = new TGeoTube(0.0,fgkCoolingTubeRmin,
coolingtubeshape[1][0]->GetDz());
coolingtubeshape[2][0] = new TGeoTube(fgkCoolingTubeRmin,fgkCoolingTubeRmax,
- 0.5*(fgkSSDModuleStiffenerPosition[1]));
+ 0.5*(fgkSSDModuleStiffenerPosition[1]-fgkSSDTolerance));
coolingtubeshape[2][1] = new TGeoTube(0.0,fgkCoolingTubeRmin,
- coolingtubeshape[2][0]->GetDz());
+ coolingtubeshape[2][0]->GetDz()-0.5*fgkSSDTolerance);
// End Ladder Cooling Tubes
TGeoTube** endladdercoolingtubeshape[fgkendladdercoolingtubenumber];
for(Int_t i=0; i<fgkendladdercoolingtubenumber; i++)
+ fgkendladdercoolingsupportdistance[1]
- fgkCoolingTubeSupportWidth-fgkSSDTolerance));
endladdercoolingtubeshape[1][1] = new TGeoTube(0.0,fgkCoolingTubeRmin,
- endladdercoolingtubeshape[1][0]->GetDz());
+ endladdercoolingtubeshape[1][0]->GetDz()-0.5*fgkSSDTolerance);
endladdercoolingtubeshape[2][0] = new TGeoTube(fgkCoolingTubeRmin,fgkCoolingTubeRmax,
0.50 * (fgkEndLadderCarbonFiberLowerJunctionLength[0]
- fgkEndLadderMountingBlockPosition[0]
- fgkendladdercoolingsupportdistance[1]
- fgkCoolingTubeSupportWidth-fgkSSDTolerance));
endladdercoolingtubeshape[2][1] = new TGeoTube(0.0,fgkCoolingTubeRmin,
- endladdercoolingtubeshape[2][0]->GetDz());
+ endladdercoolingtubeshape[2][0]->GetDz()-0.5*fgkSSDTolerance);
endladdercoolingtubeshape[3][0] = new TGeoTube(fgkCoolingTubeRmin,fgkCoolingTubeRmax,
0.50 * (fgkMountingBlockToSensorSupport
- 0.50 * (fgkSSDFlexHoleWidth-fgkSSDSensorSideSupportWidth)
- fgkEndLadderMountingBlockPosition[1]
- fgkCoolingTubeSupportWidth-fgkSSDTolerance));
endladdercoolingtubeshape[3][1] = new TGeoTube(0.0,fgkCoolingTubeRmin,
- endladdercoolingtubeshape[3][0]->GetDz());
+ endladdercoolingtubeshape[3][0]->GetDz()-0.5*fgkSSDTolerance);
endladdercoolingtubeshape[4][0] = new TGeoTube(fgkCoolingTubeRmin,fgkCoolingTubeRmax,
0.50 * (fgkendladdercoolingsupportdistance[2]-fgkSSDTolerance));
endladdercoolingtubeshape[4][1] = new TGeoTube(0.0,fgkCoolingTubeRmin,
- endladdercoolingtubeshape[4][0]->GetDz());
+ endladdercoolingtubeshape[4][0]->GetDz()-0.5*fgkSSDTolerance);
// Ladder Cooling Tubes
TGeoVolume** coolingtube[fgkcoolingtubenumber];
for(Int_t i=0; i<fgkcoolingtubenumber; i++) coolingtube[i] =
endladdercoolingtube[i][0]->SetLineColor(fColorPhynox);
endladdercoolingtube[i][1]->SetLineColor(fColorWater);
}
+
/////////////////////////////////////////////////////////////
// Virtual Volume containing Cooling Tubes
/////////////////////////////////////////////////////////////
Double_t laddercablethickness = (fgkSSDLay6SensorsNumber+2)
* (fgkSSDFlexHeight[0]+fgkSSDFlexHeight[1]);
xmothervertex[0][0] = -0.5*fgkSSDSensorWidth;
- ymothervertex[0][0] = -0.5*fgkCoolingTubeSupportHeight-fgkSSDModuleCoolingBlockToSensor
- - fgkSSDModuleVerticalDisalignment;
+ ymothervertex[0][0] = -0.5*fgkCoolingTubeSupportHeight-fgkSSDModuleCoolingBlockToSensor;
xmothervertex[0][1] = xmothervertex[0][0];
ymothervertex[0][1] = 0.0;
xmothervertex[0][2] = - 0.5*fgkSSDModuleSensorSupportDistance-2.*fgkCoolingTubeSupportRmax
xmothervertex[1][i] = xmothervertex[0][i];
ymothervertex[1][i] = ymothervertex[0][i];
}
- const char* laddername[fgkladdernumber] = {"ITSssdLay5Ladd","ITSssdLay6Ladd"};
+///////////////////////////////////////////////////////////////////////////
+// Disalignement Mother Volume corrections 25/08/08
+///////////////////////////////////////////////////////////////////////////
+ TGeoXtru* leftladdershape[fgkladdernumber];
+ TGeoXtru* centersensorladdershape[fgkladdernumber];
+ TGeoXtru* rightladdershape[fgkladdernumber];
for(Int_t i=0; i<fgkladdernumber; i++){
- laddershape[i]->DefinePolygon(kmothervertexnumber,xmothervertex[i],
- ymothervertex[i]);
- laddershape[i]->DefineSection(0,-fgkEndLadderCarbonFiberLowerJunctionLength[1]);
- laddershape[i]->DefineSection(1,ssdlaysensorsnumber[i]*fgkCarbonFiberJunctionWidth
+ leftladdershape[i] = new TGeoXtru(2);
+ centersensorladdershape[i] = new TGeoXtru(2);
+ rightladdershape[i] = new TGeoXtru(2);
+ }
+ //////////////////////////////////////
+ // Setting the names for shapes
+ //////////////////////////////////////
+ leftladdershape[0]->SetName("Lay5LeftLadderSegmentContainer");
+ leftladdershape[1]->SetName("Lay6LeftLadderSegmentContainer");
+ centersensorladdershape[0]->SetName("Lay5CenterSensorContainer");
+ centersensorladdershape[1]->SetName("Lay6CenterSensorContainer");
+ rightladdershape[0]->SetName("Lay5RightLadderSegmentContainer");
+ rightladdershape[1]->SetName("Lay6RightLadderSegmentContainer");
+ //////////////////////////////////////
+ Double_t xleftladdervertex[fgkladdernumber][kmothervertexnumber];
+ Double_t yleftladdervertex[fgkladdernumber][kmothervertexnumber];
+ Double_t xcentersensorvertex[fgkladdernumber][kmothervertexnumber];
+ Double_t ycentersensorvertex[fgkladdernumber][kmothervertexnumber];
+ Double_t xrightladdervertex[fgkladdernumber][kmothervertexnumber];
+ Double_t yrightladdervertex[fgkladdernumber][kmothervertexnumber];
+ for(Int_t i=0; i<fgkladdernumber; i++)
+ for(Int_t j=0; j<kmothervertexnumber; j++){
+ xleftladdervertex[i][j] = xmothervertex[i][j];
+ yleftladdervertex[i][j] = ymothervertex[i][j];
+ xcentersensorvertex[i][j] = xmothervertex[i][j];
+ ycentersensorvertex[i][j] = ymothervertex[i][j];
+ xrightladdervertex[i][j] = xmothervertex[i][j];
+ yrightladdervertex[i][j] = ymothervertex[i][j];
+ }
+ xcentersensorvertex[0][0] -= fgkSSDModuleSideDisalignment;
+ xcentersensorvertex[0][1] = xcentersensorvertex[0][0];
+ xcentersensorvertex[0][6] = -xcentersensorvertex[0][1];
+ xcentersensorvertex[0][7] = -xcentersensorvertex[0][0];
+
+ xcentersensorvertex[1][0] = xcentersensorvertex[0][0];
+ xcentersensorvertex[1][1] = xcentersensorvertex[0][1];
+ xcentersensorvertex[1][6] = xcentersensorvertex[0][6];
+ xcentersensorvertex[1][7] = xcentersensorvertex[0][7];
+
+ ycentersensorvertex[0][0] -= fgkSSDModuleVerticalDisalignment;
+ ycentersensorvertex[0][7] = ycentersensorvertex[0][0];
+
+ ycentersensorvertex[1][0] = ycentersensorvertex[0][0];
+ ycentersensorvertex[1][7] = ycentersensorvertex[0][7];
+ for(Int_t i=0; i<fgkladdernumber; i++){
+ // Left Ladder Piece
+ leftladdershape[i]->DefinePolygon(kmothervertexnumber,xleftladdervertex[i],
+ yleftladdervertex[i]);
+ leftladdershape[i]->DefineSection(0,-fgkEndLadderCarbonFiberLowerJunctionLength[1]);
+ leftladdershape[i]->DefineSection(1,-fgkEndLadderCarbonFiberLowerJunctionLength[1]
+ +1.45*fgkSSDMountingBlockWidth);
+ // Center Ladder Piece
+ centersensorladdershape[i]->DefinePolygon(kmothervertexnumber,xcentersensorvertex[i],
+ ycentersensorvertex[i]);
+ centersensorladdershape[i]->DefineSection(0,-fgkEndLadderCarbonFiberLowerJunctionLength[1]
+ + 1.45*fgkSSDMountingBlockWidth);
+ centersensorladdershape[i]->DefineSection(1,ssdlaysensorsnumber[i]*fgkCarbonFiberJunctionWidth
+ + fgkEndLadderCarbonFiberLowerJunctionLength[0]
+ - 2.4*fgkSSDMountingBlockWidth);
+ // Right Ladder Piece
+ rightladdershape[i]->DefinePolygon(kmothervertexnumber,xrightladdervertex[i],
+ yrightladdervertex[i]);
+ rightladdershape[i]->DefineSection(0,ssdlaysensorsnumber[i]*fgkCarbonFiberJunctionWidth
+ +fgkEndLadderCarbonFiberLowerJunctionLength[0]
+ -2.4*fgkSSDMountingBlockWidth);
+ rightladdershape[i]->DefineSection(1,ssdlaysensorsnumber[i]*fgkCarbonFiberJunctionWidth
+fgkEndLadderCarbonFiberLowerJunctionLength[0]);
- fladder[i] = new TGeoVolume(laddername[i],laddershape[i],fSSDAir);
- fladder[i]->SetLineColor(4);
- }
+ }
+ TGeoCompositeShape* laddershapecontainer[2];
+ laddershapecontainer[0] = new TGeoCompositeShape("Lay5LadderCompositeShape",
+ "Lay5LeftLadderSegmentContainer+Lay5CenterSensorContainer+Lay5RightLadderSegmentContainer");
+ laddershapecontainer[1] = new TGeoCompositeShape("Lay6LadderCompositeShape",
+ "Lay6LeftLadderSegmentContainer+Lay6CenterSensorContainer+Lay6RightLadderSegmentContainer");
+ const char* laddername[fgkladdernumber] = {"ITSssdLay5Ladd","ITSssdLay6Ladd"};
+ for(Int_t i=0; i<fgkladdernumber; i++){
+ fladder[i] = new TGeoVolume(laddername[i],laddershapecontainer[i],fSSDAir);
+ fladder[i]->SetLineColor(4);
+ }
///////////////////////////////////////////////////////////////////////////
if(!fCreateMaterials) CreateMaterials();
if(!fTransformationMatrices) CreateTransformationMatrices();
laddercableassemblylist[j] =
GetLadderCableAssemblyList(sidecablenumber[i][j<2?0:1],
ssdendladdercablelength[j]);
-// fladder[i]->AddNode((TGeoVolume*)laddercableassemblylist[j]->At(j%2==0?0:1),
-// j<2?1:2,fladdercablematrix[i][j]);
+ fladder[i]->AddNode((TGeoVolume*)laddercableassemblylist[j]->At(j%2==0?0:1),
+ j<2?1:2,fladdercablematrix[i][j]);
}
}
////////////////////////////////////////////////////////////////////////////////
mountingblockpiecedownyvertex[i][1] = mountingblockpiecedownyvertex[i][0]
+ fgkSSDMountingBlockHeight[1]
- 0.5*fgkCoolingTubeSupportHeight
- - fgkSSDModuleCoolingBlockToSensor
- - 2.*fgkSSDModuleVerticalDisalignment;
+ - fgkSSDModuleCoolingBlockToSensor;
mountingblockpiecedownxvertex[i][2] = 0.5*fgkSSDMountingBlockLength[0];
mountingblockpiecedownyvertex[i][2] = mountingblockpiecedownyvertex[i][1];
mountingblockpiecedownxvertex[i][3] = mountingblockpiecedownxvertex[i][2];
mountingblockpieceupyvertex[i][1] = mountingblockpieceupyvertex[i][0]
+ fgkSSDMountingBlockHeight[1]
- 0.5*fgkCoolingTubeSupportHeight
- - fgkSSDModuleCoolingBlockToSensor
- - 2.*fgkSSDModuleVerticalDisalignment;
+ - fgkSSDModuleCoolingBlockToSensor;
mountingblockpieceupxvertex[i][2] = 0.5*fgkSSDMountingBlockLength[0];
mountingblockpieceupyvertex[i][2] = mountingblockpieceupyvertex[i][1];
mountingblockpieceupxvertex[i][3] = mountingblockpieceupxvertex[i][2];
+ fgkMountingBlockSupportDownHeight
+ fgkSSDMountingBlockHeight[1]
- 0.5*fgkCoolingTubeSupportHeight
- - fgkSSDModuleCoolingBlockToSensor
- - 2.*fgkSSDModuleVerticalDisalignment);
+ - fgkSSDModuleCoolingBlockToSensor);
downmotherladdersupport[i] = new TGeoVolume(downmotheladdersupportname,
downmotherladdersupportshape[i],fSSDAir);
upmotherladdersupportshape[i] = new TGeoXtru(2);
+ fgkMountingBlockSupportUpHeight[i]
+ fgkSSDMountingBlockHeight[1]
- 0.5*fgkCoolingTubeSupportHeight
- - fgkSSDModuleCoolingBlockToSensor
- - 2.*fgkSSDModuleVerticalDisalignment);
+ - fgkSSDModuleCoolingBlockToSensor);
upmotherladdersupport[i] = new TGeoVolumeAssembly(upmotheladdersupportname);
// upmotherladdersupport[i] = new TGeoVolume(upmotheladdersupportname,
// upmotherladdersupportshape[i],fSSDAir);
fCreateMaterials = kTRUE;
}
/////////////////////////////////////////////////////////////////////
-
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff