class TGeoTube;
class TGeoHMatrix;
class TGeoTranslation;
+class TGeoRotation;
class TGeoXtru;
class TGeoVolumeAssembly;
#include "AliITSv11Geometry.h"
/////////////////////////////////////////////////////////////////////////////////
static const Double_t fgkSSDModuleVerticalDisalignment; // Vertical Disalignement of Volume
static const Double_t fgkSSDModuleSideDisalignment; // Vertical Disalignement of Volume
+ static const Double_t fgkSSDLadderVerticalDisalignment; // Extra space at ladder support for disalignment
static const Double_t fgkSSDTolerance; // SSD Tolerance
/////////////////////////////////////////////////////////////////////////
// Layer5 (lengths are in mm and angles in degrees)
static const Double_t fgkSSDFlexFullLength; // SSD Flex Full Length
static const Double_t fgkSSDFlexLength[4]; // SSD Flex Components Length
static const Double_t fgkSSDFlexWidth[2]; // SSD Flex Components Width
- static const Double_t fgkSSDFlexHeight[2]; // SSD Flex Layers Heigth
+ static const Double_t fgkSSDFlexHeight[2]; // SSD Flex Layers Height
static const Double_t fgkSSDFlexAngle; // SSD Flex Angle
static const Double_t fgkSSDFlexHoleLength; // SSD Flex Hole Length
static const Double_t fgkSSDFlexHoleWidth; // SSD Flex Hole Width
static const Double_t fgkSSDMountingBlockHoleTubeWidth[2]; // SSD Mounting Block Hole Tube Width
static const Double_t fgkSSDMountingBlockHoleRadius; // SSD Mounting Block Hole radius
static const Double_t fgkSSDMountingBlockScrewHoleEdge; // SSD Mounting Block Screw Hole Edge
- static const Double_t fgkSSDMountingBlockScrewHoleHeigth; // SSD Mounting Block Screw Hole Height
+ static const Double_t fgkSSDMountingBlockScrewHoleHeight; // SSD Mounting Block Screw Hole Height
static const Double_t fgkSSDMountingBlockScrewHoleRadius[2]; // SSD Mounting Block Screw Hole Radii
/////////////////////////////////////////////////////////////////////////
// SSD Mounting Block Clip Parameters (lengths are in mm and angles in degrees)
// SSD Mounting Block Support Parameters (lengths are in mm and angles in degrees)
/////////////////////////////////////////////////////////////////////////////////
static const Double_t fgkMountingBlockSupportWidth[2]; // SSD Mounting Block Support Width
- static const Double_t fgkMountingBlockSupportDownHeight; // SSD Mounting Block Support Down Heigth
+ static const Double_t fgkMountingBlockSupportDownHeight; // SSD Mounting Block Support Down Height
static const Double_t fgkMountingBlockSupportRadius[2]; // SSD Mounting Block Support Radius
- static const Double_t fgkMountingBlockSupportUpHeight[2]; // SSD Mounting Block Support Heigth
- static const Double_t fgkLadderSupportHeigth; // SSD Ladder Support Width
+ static const Double_t fgkMountingBlockSupportUpHeight[2]; // SSD Mounting Block Support Height
+ static const Double_t fgkLadderSupportHeight; // SSD Ladder Support Width
static const Double_t fgkLadderSupportRingLay5Position; // SSD Ladder Support Ring Position Layer5 respect to ITS center
static const Double_t fgkLadderSupportRingLay6Position; // SSD Ladder Support Ring Position Layer6 respect to ITS center
/////////////////////////////////////////////////////////////////////////////////
static const Double_t fgkSSDPatchPanel2RB24ITSDistance; // Patch Panel RB24 Position
static const Double_t fgkSSDPatchPanel2RB26Radius; // Patch Panel Radius
static const Double_t fgkSSDPatchPanel2RB24Radius; // Patch Panel Radius
- static const Double_t fgkSSDPatchPanelHeigth; // Patch Panel Height
+ static const Double_t fgkSSDPatchPanelHeight; // Patch Panel Height
static const Double_t fgkSSDCableMaterialBudgetHeight; // SSD Cable Material Budget
/////////////////////////////////////////////////////////////////////////
// Private methods for private members generation
TGeoVolume* GetSSDEndFlex(); // Method generating EndFlex
TGeoVolume* GetSSDMountingBlock(); // Method generating Mounting Block
TGeoVolume* GetMountingBlockClip() const; // Method generating Mounting Block Clip
- TList* GetCoolingTubeList()const; // Method generating list of Tubes
+ void CreateCoolingTubes(); // Create/set cooling tubes
TGeoVolume* GetSSDCoolingBlock(Int_t nedges);
// Method generating StiffenerFlex
- TGeoVolume* GetSSDChipCables(Double_t SSDChipCablesHeigth, Int_t nedges);
+ void GetSSDChipCables(TGeoVolume *&cableL, TGeoVolume *&cableR, Double_t SSDChipCablesHeigth, Int_t nedges);
// Method setting ChipCables
- TList* GetSSDChipSystem(); // Method setting Chip System
- TGeoVolume* GetSSDChips() const; // Method generating Chips
+ TGeoVolume* GetSSDChip() const; // Method generating Chips
TList* GetLadderCableSegment(Double_t ssdendladdercablelength);
// Method generating LadderCableSegment
TGeoVolume* GetLadderCable(Int_t n, Double_t ssdendladdercablelength);
TGeoVolume** EndCapSupport(); // End Cap Support Layer 5 and Layer 6
void SetEndCapSupportAssembly(); // EndCap Support + End Cap Layer 5 and 6
TGeoVolume* GetEndCapEffectiveCables(Double_t radiusmin, Double_t radiusmax,
- Double_t width,Int_t ncables,char* volname); // End Cap Effective HV Cables
+ Double_t width,Int_t ncables,const char* volname); // End Cap Effective HV Cables
TGeoXtru* GetArcShape(Double_t phi, Double_t rmin,
Double_t rmax, Int_t nedges, Double_t height);
//Auxiliary Method for Arc Shape
TGeoArb8* GetArbShape(TVector3* vertexpos[],Double_t* width,
- Double_t height,char* shapename,Int_t isign = 1) const;
+ Double_t height,const char* shapename,Int_t isign = 1) const;
// Method generating an Arb shape
TGeoShape* GetScrewShape(Double_t* radius,Int_t* edgesnumber,Double_t* section) const;// Method Generating the Screw Shape
TGeoShape* GetHoleShape(Double_t radius, Int_t nedges, Double_t *section) const;// Method Generating the Hole Shape
/////////////////////////////////////////
// Cooling Tube
/////////////////////////////////////////
- static const Int_t fgkcoolingtubenumber = 3; // Coling Tube Number
- TGeoHMatrix** fcoolingtubematrix[fgkcoolingtubenumber+1]; // Cooling Tube Matrix
- TGeoVolume* fcoolingtube[fgkcoolingtubenumber]; // Ladder Cooling Tube
- static const Int_t fgkendladdercoolingtubenumber = 5; // End Ladder Cooling Tube Number
+ TGeoHMatrix* fcoolingtubematrix[2]; // Cooling Tube Matrix
+ TGeoVolume* fcoolingtube; // Ladder Cooling Tube
+ static const Int_t fgkendladdercoolingtubenumber = 2; // End Ladder Cooling Tube Number
TGeoVolume* fendladdercoolingtube[fgkendladdercoolingtubenumber]; // End Ladder Cooling Tube
- TGeoHMatrix** fendladdercoolingtubematrix[2]; //End ladder cooling tube matrix
+ TGeoHMatrix* fendladdercoolingtubematrix[fgkendladdercoolingtubenumber][2]; //End ladder cooling tube matrix
/////////////////////////////////////////
// End Ladder Components
/////////////////////////////////////////
Int_t fColorEpoxy; // ===
Int_t fColorWater; // ===
Int_t fColorG10; // ===
-ClassDef(AliITSv11GeometrySSD, 3) // ITS v11 SSD geometry
+ClassDef(AliITSv11GeometrySSD, 4) // ITS v11 SSD geometry
};
#endif