/**************************************************************************
- * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
+ * Copyright(c) 2007-2009, ALICE Experiment at CERN, All rights reserved. *
* *
* Author: The ALICE Off-line Project. *
* Contributors are mentioned in the code where appropriate. *
* provided "as is" without express or implied warranty. *
**************************************************************************/
+
+/* $Id$ */
+
+
//========================================================================
//
// Geometry of the Inner Tracking System
-//
+// ---------------------------------------
// This geometry is a mix between the old geometry (originally coded
// in AliITSvPPRasymmFMD) and the new TGeo geometry (v11).
// The flags which indicate whether the old or the new part is used
//========================================================================
-// $Id$
-// $Log$
+// $Log: AliITSv11Hybrid.cxx,v $
+// Revision 1.14 2008/01/10 11:14:13 masera
+// SPD/SDD thermal shield and SPD cones updated (M. Sitta)
+//
+// Revision 1.13 2007/12/20 16:58:46 masera
+// bug fixes for SPD1 and SDD1 (A. Dainese)
+//
+// Revision 1.12 2007/12/17 14:48:23 masera
+// Thermal shield between SPD and SDD (M. Sitta)
+//
+// Revision 1.11 2007/11/22 08:32:48 masera
+// Second thermal shield updated in agreement with the installed one. Correction concerning the chemical composition of Rohacell (M.Sitta)
+//
+// Revision 1.10 2007/11/19 17:01:26 masera
+// SSD ladder supports + endcaps systems (E. Cattaruzza)
+//
+// Revision 1.9 2007/10/21 19:22:53 masera
+// Coding conventions
+//
+// Revision 1.8 2007/10/21 18:59:10 masera
+// SPD new geometry added to Hybrid V11
+//
+// Revision 1.7 2007/08/24 14:32:57 hristov
+// Introduction of SPD half-stave volumes, cleaning and new code (in relation to new SPD geometry) in AliITSv11Hybrid (Ludovic)
+//
// Revision 1.6 2007/07/27 08:12:39 morsch
// Write all track references into the same branch.
//
// Updates concerning the geometry: versioning system, new V11hybrid version, bug fixes (B.Nilsend and L. Gaudichet
//
-
#include <TClonesArray.h>
-#include <TGeometry.h>
-#include <TLorentzVector.h>
+#include <TGeoGlobalMagField.h>
+#include <TGeoManager.h>
#include <TGeoMatrix.h>
#include <TGeoPhysicalNode.h>
-#include <TArrayD.h>
-#include <TArrayF.h>
-#include <TString.h>
-#include <TNode.h>
-#include <TTUBE.h>
-#include <TGeoManager.h>
#include <TGeoVolume.h>
+#include <TGeoXtru.h>
+#include <TLorentzVector.h>
+#include <TString.h>
#include <TVirtualMC.h>
#include "AliITS.h"
#include "AliITSDetTypeSim.h"
-#include "AliITSgeom.h"
-#include "AliITSgeomSDD.h"
-#include "AliITSgeomSPD.h"
-#include "AliITSgeomSSD.h"
#include "AliITShit.h"
-#include "AliITSresponseSDD.h"
#include "AliITSCalibrationSDD.h"
-#include "AliITSCalibrationSPD.h"
-#include "AliITSCalibrationSSD.h"
#include "AliITSsegmentationSDD.h"
#include "AliITSsegmentationSPD.h"
#include "AliITSsegmentationSSD.h"
#include "AliITSv11GeometrySPD.h"
#include "AliITSv11GeometrySDD.h"
#include "AliITSv11GeometrySSD.h"
+#include "AliITSv11GeometrySupport.h"
+#include "AliGeomManager.h"
ClassImp(AliITSv11Hybrid)
//______________________________________________________________________
AliITSv11Hybrid::AliITSv11Hybrid():
- AliITS(),
- fGeomDetOut(kFALSE),
- fGeomDetIn(kFALSE),
fByThick(kTRUE),
fMajorVersion(IsVersion()),
fMinorVersion(-1),
fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
fSPDgeom(0),
fSDDgeom(0),
- fSSDgeom(0)
+ fSSDgeom(0),
+ fSupgeom(0)
{
// Standard default constructor
// Inputs:
//______________________________________________________________________
AliITSv11Hybrid::AliITSv11Hybrid(const char *title)
: AliITS("ITS", title),
- fGeomDetOut(kFALSE),
- fGeomDetIn(kFALSE),
fByThick(kTRUE),
fMajorVersion(IsVersion()),
fMinorVersion(1),
fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
fSPDgeom(0),
fSDDgeom(0),
- fSSDgeom(0) {
+ fSSDgeom(0),
+ fSupgeom(0)
+{
// Standard constructor for the v11Hybrid geometry.
// Inputs:
// const char * title Arbitrary title
fSPDgeom = new AliITSv11GeometrySPD();
fSDDgeom = new AliITSv11GeometrySDD(0);
fSSDgeom = new AliITSv11GeometrySSD();
+ fSupgeom = new AliITSv11GeometrySupport();
fIdN = 6;
fIdName = new TString[fIdN];
if (AliITSInitGeometry::SPDIsTGeoNative()) {
-// fIdName[0] = fSPDgeom->GetSPDLayer1SensitiveVolumeName();
-// fIdName[1] = fSPDgeom->GetSPDLayer2SensitiveVolumeName();
+ fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
+ fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
} else {
fIdName[0] = "ITS1";
fIdName[1] = "ITS2";
SetThicknessChip2();
SetDensityServicesByThickness();
- fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.euc";
- strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
- strncpy(fRead,fEuclidGeomDet,60);
- strncpy(fWrite,fEuclidGeomDet,60);
- strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
}
//______________________________________________________________________
AliITSv11Hybrid::AliITSv11Hybrid(const char *name, const char *title)
: AliITS("ITS", title),
- fGeomDetOut(kFALSE),
- fGeomDetIn(kFALSE),
fByThick(kTRUE),
fMajorVersion(IsVersion()),
fMinorVersion(1),
fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
fSPDgeom(0),
fSDDgeom(0),
- fSSDgeom(0) {
+ fSSDgeom(0),
+ fSupgeom(0)
+{
// Standard constructor for the v11Hybrid geometry.
// Inputs:
// const char * name Ignored, set to "ITS"
fSPDgeom = new AliITSv11GeometrySPD();
fSDDgeom = new AliITSv11GeometrySDD(0);
fSSDgeom = new AliITSv11GeometrySSD();
+ fSupgeom = new AliITSv11GeometrySupport();
fIdN = 6;
fIdName = new TString[fIdN];
(void) name; // removes warning message
if (AliITSInitGeometry::SPDIsTGeoNative()) {
-// fIdName[0] = fSPDgeom->GetSPDLayer1SensitiveVolumeName();
-// fIdName[1] = fSPDgeom->GetSPDLayer2SensitiveVolumeName();
+ fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
+ fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
} else {
fIdName[0] = "ITS1";
fIdName[1] = "ITS2";
SetThicknessChip2();
SetDensityServicesByThickness();
- fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.euc";
- strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
- strncpy(fRead,fEuclidGeomDet,60);
- strncpy(fWrite,fEuclidGeomDet,60);
- strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
}
//______________________________________________________________________
delete fSPDgeom;
delete fSDDgeom;
delete fSSDgeom;
+ delete fSupgeom;
}
//______________________________________________________________________
-void AliITSv11Hybrid::SetT2Lmatrix(const char *name, Double_t yShift,
+void AliITSv11Hybrid::SetT2Lmatrix(Int_t uid, Double_t yShift,
Bool_t yFlip, Bool_t yRot180)
const {
//
// This function is used in AddAlignableVolumes()
- TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntry(name);
- const char *path = alignableEntry->GetTitle();
-
- if (!gGeoManager->cd(path))
- AliFatal(Form("Volume path %s not valid!",path));
- TGeoHMatrix* globMatrix = gGeoManager->GetCurrentMatrix();
+ TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntryByUID(uid);
+ TGeoHMatrix* globMatrix = alignableEntry->GetGlobalOrig();
Double_t *gtrans = globMatrix->GetTranslation(), rotMatrix[9];
memcpy(&rotMatrix[0], globMatrix->GetRotationMatrix(), 9*sizeof(Double_t));
if (yRot180) {
al = TMath::ATan2(rotMatrix[1],-rotMatrix[0]);
}
+ Double_t xShift = gtrans[0]*TMath::Cos(al)+gtrans[1]*TMath::Sin(al);
+ Double_t zShift = -gtrans[2];
TGeoHMatrix *matLtoT = new TGeoHMatrix;
- matLtoT->SetDx( gtrans[0]*TMath::Cos(al)+gtrans[1]*TMath::Sin(al) ); // translation
+ matLtoT->SetDx( xShift ); // translation
matLtoT->SetDy( yShift );
- matLtoT->SetDz(-gtrans[2]);
+ matLtoT->SetDz( zShift );
rotMatrix[0]= 0; rotMatrix[1]= 1; rotMatrix[2]= 0; // + rotation
rotMatrix[3]= 1; rotMatrix[4]= 0; rotMatrix[5]= 0;
rotMatrix[6]= 0; rotMatrix[7]= 0; rotMatrix[8]=-1;
if (yFlip) rotMatrix[3] = -1; // flipping in y (for SPD1)
+ if (yFlip) rotMatrix[1] = -1; // flipping in y (for SPD1)
if (yRot180) { // rotation of pi around the axis perpendicular to the wafer
+ if (yFlip) matLtoT->SetDx( -xShift ); // flipping in y (for SPD1)
matLtoT->SetDy( -yShift );
+ matLtoT->SetDz( -zShift );
+ rotMatrix[8]=1;
rotMatrix[3] = -1;
if (yFlip) rotMatrix[3] = 1; // flipping in y (for SPD1)
- matLtoT->SetDz(gtrans[2]);
- rotMatrix[8]=1;
}
TGeoRotation rot;
}
//______________________________________________________________________
-void AliITSv11Hybrid::AddAlignableVolumes() const
-{
- //
+void AliITSv11Hybrid::AddAlignableVolumes() const{
// Creates entries for alignable volumes associating the symbolic volume
// name with the corresponding volume path.
//
// system
// For this, this function has to run before the misalignment because we
// are using the ideal positions in the AliITSgeom object.
+ // Inputs:
+ // none.
+ // Outputs:
+ // none.
+ // Return:
+ // none.
AliInfo("Add ITS alignable volumes");
return;
}
+ AliGeomManager::ELayerID layerId;
+ Int_t modUID, modnum;
+
if( !gGeoManager->SetAlignableEntry("ITS","ALIC_1/ITSV_1") )
- AliFatal("Unable to set alignable entry!!");
+ AliFatal(Form("Unable to set alignable entry ! %s :: %s",
+ "ITS","ALIC_1/ITSV_1"));
TString strSPD = "ITS/SPD";
TString strSDD = "ITS/SDD";
TString strEntryName4;
//===== SPD layers =====
+
if (AliITSInitGeometry::SPDIsTGeoNative()) { // new SPD geometry
- TString str0 = "ALIC_1/ITSV_1/ITSSPDCarbonFiberSectorV_";
- TString str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/LAY1_STAVE_";
- TString str1Bis = "/HALF-STAVE";
+ TString str0 = "ALIC_1/ITSV_1/ITSSPD_1/ITSSPDCarbonFiberSectorV_";
+ TString str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay1-Stave_";
+ TString str1Bis = "/ITSSPDhalf-Stave";
TString str1Tierce = "_1";
- TString str2 = "/LAY1_LADDER_";
+ TString str2 = "/ITSSPDlay1-Ladder_";
TString sector;
TString stave;
TString halfStave;
TString module;
+ layerId = AliGeomManager::kSPD1;
+ modnum = 0;
+
for(Int_t cSect = 0; cSect<10; cSect++) {
sector = str0;
strEntryName1 += strSector;
strEntryName1 += cSect;
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),sector.Data());
-
+ AliFatal(Form("New lay 1: Unable to set alignable entry 1! %s::%s",
+ strEntryName1.Data(),sector.Data()));
+
for(Int_t cStave=0; cStave<2; cStave++) {
stave = sector;
stave += str1;
- stave += cStave;
+ stave += cStave+1;
strEntryName2 = strEntryName1;
strEntryName2 += strStave;
strEntryName2 += cStave;
strEntryName3 += strHalfStave;
strEntryName3 += cHS;
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),halfStave.Data()))
- AliFatal(Form("Unable to set alignable entry!! %s :: %s",strEntryName3.Data(),halfStave.Data()));
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("New lay 1: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
for(Int_t cLad=0; cLad<2; cLad++) {
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
module = halfStave;
module += str2;
- module += cLad+cHS*2;
+ module += cLad+cHS*2+1;
strEntryName4 = strEntryName3;
strEntryName4 += strLadder;
strEntryName4 += cLad+cHS*2;
- if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data()))
- AliFatal("Unable to set alignable entry!!");
-
- SetT2Lmatrix(strEntryName4.Data(), -0.0081, kTRUE, kTRUE);
- }
- }
- }
- }
-
- str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/LAY2_STAVE_";
- str2 = "/LAY2_LADDER_";
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("New lay 1: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
+
+ SetT2Lmatrix(modUID, 0.0081, kTRUE, kTRUE);
+ // 0.0081 is the shift between the centers of alignable
+ // and sensitive volumes. It is directly extracted from
+ // the new SPD geometry
+ } // end for cLad
+ } // end for cHS
+ } // end for cStave
+ } // end for cSect
+
+ layerId = AliGeomManager::kSPD2;
+ modnum = 0;
+ str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay2-Stave_";
+ str2 = "/ITSSPDlay2-Ladder_";
for(Int_t cSect = 0; cSect<10; cSect++) {
stave = sector;
stave += str1;
- stave += cStave;
+ stave += cStave+1;
strEntryName2 = strEntryName1;
strEntryName2 += strStave;
strEntryName2 += cStave;
strEntryName3 += strHalfStave;
strEntryName3 += cHS;
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),halfStave.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("New lay 2: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
for(Int_t cLad=0; cLad<2; cLad++) {
-
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
module = halfStave;
module += str2;
- module += cLad+cHS*2;
+ module += cLad+cHS*2 +1;
strEntryName4 = strEntryName3;
strEntryName4 += strLadder;
strEntryName4 += cLad+cHS*2;
- if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("New lay 2: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
- SetT2Lmatrix(strEntryName4.Data(), -0.0081, kFALSE);
- }
- }
- }
- }
+ SetT2Lmatrix(modUID, -0.0081, kFALSE);
+ } // end for cLad
+ } // end for cHS
+ } // end for cStave
+ } // cSect
} else { // else old SPD geometry
TString halfStave;
TString module;
+ layerId = AliGeomManager::kSPD1;
+ modnum = 0;
+
for(Int_t cSect = 0; cSect<10; cSect++) {
sector = str0;
strEntryName1 += 0;
strEntryName1 += strSector;
strEntryName1 += cSect;
- //printf("%s == %s\n",strEntryName1.Data(),sector.Data());
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
- AliFatal("Unable to set alignable entry!!");
-
+ AliFatal(Form("Old lay1: Unable to set alignable entry 1! %s::%s",
+ strEntryName1.Data(),sector.Data()));
+
for(Int_t cStave = 0; cStave<2; cStave++) {
-
+
stave = sector;
stave += str1;
stave += cStave+1;
strEntryName2 = strEntryName1;
strEntryName2 += strStave;
strEntryName2 += cStave;
- //printf("%s == %s\n",strEntryName2.Data(),stave.Data()); // this is a stave
+ // this is a stave
+ //printf("%s == %s\n",strEntryName2.Data(),stave.Data());
for(Int_t cHS=0; cHS<2; cHS++) {
strEntryName3 = strEntryName2;
strEntryName3 += strHalfStave;
strEntryName3 += cHS;
- //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data()); // this is a half-stave
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),halfStave.Data()))
- AliFatal("Unable to set alignable entry!!");
+ // this is a half-stave
+ //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("Old lay 1: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
for(Int_t cLadder = 0; cLadder<2; cLadder++) {
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
module = halfStave;
module += str2;
module += cLadder+cHS*2+1;
strEntryName4 += strLadder;
strEntryName4 += cLadder+cHS*2;
//printf("%s == %s\n",strEntryName4.Data(),module.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("Old lay 1: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
- SetT2Lmatrix(strEntryName4.Data(), -fChip1*0.0001/2., kTRUE);
- }
- }
- }
- }
+ SetT2Lmatrix(modUID, -fChip1*0.0001/2., kTRUE);
+ } // end for cLadder
+ } // end for cHS
+ } // end for cStave
+ } // end for cSect
+
+ layerId = AliGeomManager::kSPD2;
+ modnum = 0;
str1Bis = "/L2H-STAVE";
str1 = "/I20B_";
strEntryName1 += 1;
strEntryName1 += strSector;
strEntryName1 += cSect;
- // if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
- // AliFatal("Unable to set alignable entry!!");
- // we don't need the previous lines because the whole sector is already define
- // with first layer ...
-
+ //if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
+ // AliFatal(Form("Unable to set alignable entry!!");
+ // we don't need the previous lines because the whole sector is
+ // already define with first layer ...
+
for(Int_t cStave =0; cStave<4; cStave++) {
stave = sector;
strEntryName3 = strEntryName2;
strEntryName3 += strHalfStave;
strEntryName3 += cHS;
- //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data()); // this is a half-stave
- if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),halfStave.Data()))
- AliFatal("Unable to set alignable entry!!");
+ // this is a half-stave
+ //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
+ halfStave.Data()))
+ AliFatal(Form("Old lay 2: Unable to set alignable entry 3! %s::%s",
+ strEntryName3.Data(),halfStave.Data()));
for(Int_t cLad =0; cLad<2; cLad++) {
-
+
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
module = halfStave;
module += str2;
module += cLad+cHS*2+1;
strEntryName4 += strLadder;
strEntryName4 += cLad+cHS*2;
//printf("%s == %s\n",strEntryName4.Data(),module.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
+ AliFatal(Form("Old lay2: Unable to set alignable entry 4! %s::%s",
+ strEntryName4.Data(),module.Data()));
- SetT2Lmatrix(strEntryName4.Data(), -fChip2*0.0001/2., kFALSE);
- }
- }
- }
- }
- }
+ SetT2Lmatrix(modUID, -fChip2*0.0001/2., kFALSE);
+ } // end for cLad
+ } // end for cHS
+ } // end for cStave
+ } // end for cSect
+ } // end if AliITSInitGeometry::SPSIsTGeoNative().
//===== SDD layers =====
if (AliITSInitGeometry::SDDIsTGeoNative()) { // new SDD geometry
+ layerId = AliGeomManager::kSDD1;
+ modnum = 0;
TString str0 = "/ALIC_1/ITSV_1/ITSsddLayer3_1/ITSsddLadd_"; // SDD layer1
TString str1 = "/ITSsddSensor3_";
- TString str2 = "/ITSsddWafer3_1";
TString ladder;
- TString wafer;
+ TString sensor;
for(Int_t c1 = 0; c1<14; c1++) {
strEntryName1 += c1;
//printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =0; c2<6; c2++) {
- wafer = ladder;
- wafer += str1;
- wafer += c2;
- wafer += str2; // one wafer
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ sensor = ladder;
+ sensor += str1;
+ sensor += c2;
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += c2;
//printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),sensor.Data()));
- SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE, c2>=3);
+ SetT2Lmatrix(modUID, 0, kFALSE, c2>=3);
}
}
+ layerId = AliGeomManager::kSDD2;
+ modnum = 0;
str0 = "/ALIC_1/ITSV_1/ITSsddLayer4_1/ITSsddLadd_"; // SDD layer2
str1 = "/ITSsddSensor4_";
- str2 = "/ITSsddWafer4_1";
for(Int_t c1 = 0; c1<22; c1++) {
strEntryName1 += c1;
//printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =0; c2<8; c2++) {
- wafer = ladder;
- wafer += str1;
- wafer += c2;
- wafer += str2; // one wafer
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
+ sensor = ladder;
+ sensor += str1;
+ sensor += c2;
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += c2;
//printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),sensor.Data()));
- SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE, c2>=4);
+ SetT2Lmatrix(modUID, 0, kFALSE, c2>=4);
}
}
} else { // else old SDD geometry
+ layerId = AliGeomManager::kSDD1;
+ modnum = 0;
+
TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I004_";
TString str1 = "/I302_";
strEntryName1 +=strLadder;
strEntryName1 += (c1-1);
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =1; c2<=6; c2++){
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2; // one wafer
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
- SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE);
+ SetT2Lmatrix(modUID, 0, kFALSE);
}
}
+ layerId = AliGeomManager::kSDD2;
+ modnum = 0;
str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I005_";
str1 = "/I402_";
strEntryName1 +=strLadder;
strEntryName1 += (c1-1);
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =1; c2<=8; c2++){
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2; // one wafer
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s,%s",
+ strEntryName2.Data(),wafer.Data()));
- SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE);
+ SetT2Lmatrix(modUID, 0, kFALSE);
}
}
} // end SDD
//===== SSD layers =====
if (AliITSInitGeometry::SSDIsTGeoNative()) { // new SSD geometry
- TString str0 = "/ALIC_1/ITSV_1/ITSssdLayer5_1/ITSssdLay5Ladd_"; // SSD layer1
- TString str1 = "/ITSsddSensor5_";
+ layerId = AliGeomManager::kSSD1;
+ modnum = 0;
+ TString str0 = "/ALIC_1/ITSV_1/ITSssdLayer5_1/ITSssdLay5Ladd_";//SSD layer1
+ TString str1 = "/ITSssdSensor5_";
TString str2 = "";
TString ladder;
TString wafer;
strEntryName1 += c1;
//printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =0; c2<22; c2++) {
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2;
strEntryName2 += strSensor;
strEntryName2 += c2;
//printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
- SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE, kFALSE);
+ SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
}
}
+ layerId = AliGeomManager::kSSD2;
+ modnum = 0;
str0 = "/ALIC_1/ITSV_1/ITSssdLayer6_1/ITSssdLay6Ladd_"; // SSD layer2
- str1 = "/ITSsddSensor6_";
+ str1 = "/ITSssdSensor6_";
str2 = "";
for(Int_t c1 = 0; c1<38; c1++) {
strEntryName1 += c1;
//printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
for(Int_t c2 =0; c2<25; c2++) {
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2;
strEntryName2 += strSensor;
strEntryName2 += c2;
//printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
- SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE, kFALSE);
+ SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
}
}
} else { // else old SSD geometry
+
+ layerId = AliGeomManager::kSSD1;
+ modnum = 0;
TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I565_";
TString str1 = "/I562_";
TString ladder;
strEntryName1 +=strLadder;
strEntryName1 += (c1-1);
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
-
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
+
for(Int_t c2 = 1; c2<=22; c2++){
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2; // one wafer
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
-
- SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE);
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
+
+ SetT2Lmatrix(modUID, 0, kFALSE);
}
}
+ layerId = AliGeomManager::kSSD2;
+ modnum = 0;
str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_";
str1 = "/I566_";
strEntryName1 +=strLadder;
strEntryName1 += (c1-1);
if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
-
+ AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
+ strEntryName1.Data(),ladder.Data()));
+
for(Int_t c2 = 1; c2<=25; c2++){
+ modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
wafer = ladder;
wafer += str1;
wafer += c2; // one wafer
strEntryName2 = strEntryName1;
strEntryName2 += strSensor;
strEntryName2 += (c2-1);
- if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
- AliFatal("Unable to set alignable entry!!");
- //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
-
- SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE);
+ if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
+ AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
+ strEntryName2.Data(),wafer.Data()));
+
+ SetT2Lmatrix(modUID, 0, kFALSE);
}
}
} // end SSD geometry
}
-//______________________________________________________________________
-void AliITSv11Hybrid::BuildGeometry(){
- // Geometry builder for the ITS version 10. Event Display geometry.
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-
- TNode *node, *top;
-
- const Int_t kColorITS=kYellow;
- //
- top = gAlice->GetGeometry()->GetNode("alice");
-
-
- new TTUBE("S_layer1","Layer1 of ITS","void",
- 3.8095,3.8095+1.03*9.36/100.,14.35);
- top->cd();
- node = new TNode("Layer1","Layer1","S_layer1",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer2","Layer2 of ITS","void",7.,7.+1.03*9.36/100.,14.35);
- top->cd();
- node = new TNode("Layer2","Layer2","S_layer2",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer3","Layer3 of ITS","void",15.,15.+0.94*9.36/100.,25.1);
- top->cd();
- node = new TNode("Layer3","Layer3","S_layer3",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer4","Layer4 of ITS","void",24.1,24.1+0.95*9.36/100.,32.1);
- top->cd();
- node = new TNode("Layer4","Layer4","S_layer4",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer5","Layer5 of ITS","void",
- 38.5,38.5+0.91*9.36/100.,49.405);
- top->cd();
- node = new TNode("Layer5","Layer5","S_layer5",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-
- new TTUBE("S_layer6","Layer6 of ITS","void",
- 43.5765,43.5765+0.87*9.36/100.,55.27);
- top->cd();
- node = new TNode("Layer6","Layer6","S_layer6",0,0,0,"");
- node->SetLineColor(kColorITS);
- fNodes->Add(node);
-}
-
//______________________________________________________________________
void AliITSv11Hybrid::CreateGeometry() {
TGeoManager *geoManager = gGeoManager;
CreateOldGeometry();
- TGeoVolume *vITS = geoManager->GetVolume("ITSV");
-
- TGeoVolume *vIS02 = geoManager->GetVolume("IS02");
+ TGeoVolume *vITSV = geoManager->GetVolume("ITSV");
+ TGeoVolume *vITSS = geoManager->GetVolume("ITSS");
const Char_t *cvsDate="$Date$";
const Char_t *cvsRevision="$Revision$";
- const Int_t length=100;
- Char_t vstrng[length];
- if(fInitGeom.WriteVersionString(vstrng,length,(AliITSVersion_t)IsVersion(),
- fMinorVersion,cvsDate,cvsRevision))
- vITS->SetTitle(vstrng);
+ const Int_t kLength=100;
+ Char_t vstrng[kLength];
+ if(fInitGeom.WriteVersionString(vstrng,kLength,(AliITSVersion_t)IsVersion(),
+ fMinorVersion,cvsDate,cvsRevision)) {
+ vITSV->SetTitle(vstrng);
+ vITSS->SetTitle(vstrng);
+ }
if (AliITSInitGeometry::SPDIsTGeoNative()) {
- fSPDgeom->SPDSector(vITS);
+ fSPDgeom->SPDSector(vITSV);
}
if (AliITSInitGeometry::SDDIsTGeoNative()) {
- fSDDgeom->Layer3(vITS);
- fSDDgeom->Layer4(vITS);
- fSDDgeom->ForwardLayer3(vIS02);
- fSDDgeom->ForwardLayer4(vIS02);
+ fSDDgeom->Layer3(vITSV);
+ fSDDgeom->Layer4(vITSV);
+ fSDDgeom->ForwardLayer3(vITSV);
+ fSDDgeom->ForwardLayer4(vITSV);
}
+
if (AliITSInitGeometry::SSDIsTGeoNative()) {
- fSSDgeom->Layer5(vITS);
- fSSDgeom->Layer6(vITS);
+ fSSDgeom->Layer5(vITSV);
+ fSSDgeom->Layer6(vITSV);
+ fSSDgeom->LadderSupportLayer5(vITSV);
+ fSSDgeom->LadderSupportLayer6(vITSV);
+ fSSDgeom->EndCapSupportSystemLayer6(vITSV);
+ fSSDgeom->EndCapSupportSystemLayer5(vITSV);
+ }
+
+ if (AliITSInitGeometry::SPDshieldIsTGeoNative())
+ fSupgeom->SPDCone(vITSV);
+
+ if (AliITSInitGeometry::SDDconeIsTGeoNative())
+ fSupgeom->SDDCone(vITSV);
+
+ if (AliITSInitGeometry::SSDconeIsTGeoNative())
+ fSupgeom->SSDCone(vITSV);
+
+ if (AliITSInitGeometry::ServicesAreTGeoNative()) {
+ fSDDgeom->SDDCables(vITSV);
+ fSSDgeom->SSDCables(vITSV);
+ fSupgeom->ServicesCableSupport(vITSS);
+ }
+
+ if (AliITSInitGeometry::SupportIsTGeoNative()) {
+ fSupgeom->ITSTPCSupports(vITSS);
}
}
//End_Html
//INNER RADII OF THE SILICON LAYERS
// Float_t rl[6] = { 3.8095,7.,15.,24.,38.1,43.5765 };
- //THICKNESSES OF LAYERS (in % radiation length)
+ //THICKNESSES OF LAYERS (in % radiation kLength)
Float_t drl[6] = { 1.03,1.03,0.94,0.95,0.91,0.87 };
//HALF LENGTHS OF LAYERS
// Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 };
dgh[48] = ztpc+4.+0.1;
dgh[49] = 62.0;//62.4;
dgh[50] = 85.;
- gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 51);
+// gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 51);
+ new TGeoVolumeAssembly("ITSV");
+ new TGeoVolumeAssembly("ITSS");
// --- Place the ghost volume in its mother volume (ALIC) and make it
// invisible
// gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY");
//gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., idrotm[199], "MANY");
- //gMC->Gsatt("ITSV", "SEEN", 0);
+ //gGeoManager->SetVolumeAttribute("ITSV", "SEEN", 0);
//gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "MANY"); //=== LG
gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY"); //=== LG
+ gMC->Gspos("ITSS", 1, "ALIC", 0., 0., 0., 0, "ONLY"); //=== MS
// --- Define ghost volume containing the six layers and fill it with air
// --- Place the ghost volume in its mother volume (ITSV) and make it
// invisible
//gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY");
- //gMC->Gsatt("ITSD", "SEEN", 0);
+ //gGeoManager->SetVolumeAttribute("ITSD", "SEEN", 0);
//======================================================================
// Let's make ITSD an assembly, because we can then add the new geometry
//======================================================================
//TGeoVolumeAssembly *dITS = new TGeoVolumeAssembly("ITSD");
+ if (! AliITSInitGeometry::SPDshieldIsTGeoNative() ||
+ ! AliITSInitGeometry::SPDIsTGeoNative() ||
+ ! AliITSInitGeometry::SDDIsTGeoNative() ||
+ ! AliITSInitGeometry::SSDIsTGeoNative() ||
+ ! AliITSInitGeometry::SDDconeIsTGeoNative() ||
+ ! AliITSInitGeometry::SSDconeIsTGeoNative() ) {
new TGeoVolumeAssembly("ITSD");
gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., idrotm[199], "ONLY");
-
+ }
// --- Define SPD (option 'b') volumes ----------------------------
dits[2] = 39.4;
gMC->Gsvolu("ICY1", "TUBE", idtmed[208], dits, 3);
- // --- Define volume of second cylinder between SDD and SSD --------------
- dits[0] = (59.5-0.128)/2.;
+ // --- Define volumes of second cylinder between SDD and SSD ------------
+ // --- (from B. Giraudo plots - M.S. 20 Nov 2007)
+ dits[0] = 59.5/2. - 0.06;
dits[1] = 59.5/2.;
- dits[2] = 56.2; // was 57
+ dits[2] = 102/2.; // was 57
gMC->Gsvolu("ICY2", "TUBE", idtmed[208], dits, 3);
+ dits[1] = dits[0];
+ dits[0] = dits[1] - 0.5;
+ gMC->Gsvolu("ICY3", "TUBE", idtmed[267], dits, 3);
+
+ dits[1] = dits[0];
+ dits[0] = dits[1] - 0.06;
+ gMC->Gsvolu("ICY4", "TUBE", idtmed[208], dits, 3);
+
// --- Define volumes of SDD cone ----------------------------------
dits[0] = 0;
if (! AliITSInitGeometry::SDDconeIsTGeoNative()) {
gMC->Gspos("ICY1",1,"IS02",0.0,0.0,0.,0,"ONLY");
gMC->Gspos("ICY2",1,"IS01",0.0,0.0,0.,0,"ONLY");
+ gMC->Gspos("ICY3",1,"IS01",0.0,0.0,0.,0,"ONLY");
+ gMC->Gspos("ICY4",1,"IS01",0.0,0.0,0.,0,"ONLY");
// --- Place volumes of SDD cone ----------------------------------
gMC->Gspos("I2CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY");
gMC->Gspos("I2CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY");
-
// --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES
// UPPER PART
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
// UPPER PART
- dgh[0] = (ztpc-97.5)/2.;
+ dgh[0] = (ztpc-97.5-2.3)/2.;
dgh[1] = 46.2;
dgh[2] = 46.2+1.0;
dgh[3] = 62.3;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICU1", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ // gMC->Gspos("ICU1", 1, "ITSV", 0., 0.,97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU1", 1, "ITSV", 0., 0.,-(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART
// LOWER PART
- dgh[0] = (ztpc-97.5)/2.;
+ dgh[0] = (ztpc-97.5-2.3)/2.;
dgh[1] = 46.2;
dgh[2] = 46.2+1.0;
dgh[3] = 62.3;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICU2", "CONS", idtmed[213], dgh, 7);
- gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ // gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICU2", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
// UPPER PART
- dgh[0] = (ztpc-97.5)/2.;
+ dgh[0] = (ztpc-97.5-2.3)/2.;
dgh[1] = 46.2+1.0;
dgh[2] = 46.2+1.0+1.5;
dgh[3] = 62.3+1.0;
dgh[5] = 12.;
dgh[6] = 168.;
gMC->Gsvolu("ICC1", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ // gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC1", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART
// LOWER PART
- dgh[0] = (ztpc-97.5)/2.;
+ dgh[0] = (ztpc-97.5-2.3)/2.;
dgh[1] = 46.2+1.0;
dgh[2] = 46.2+1.0+1.5;
dgh[3] = 62.3+1.0;
dgh[5] = 192.;
dgh[6] = 348.;
gMC->Gsvolu("ICC2", "CONS", idtmed[225], dgh, 7);
- gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ // gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY");
+ gMC->Gspos("ICC2", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
// UPPER PART
- dgh[0] = 62.;
+ dgh[0] = 62.2;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU3", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU3", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]+1.), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
// LOWER PART
- dgh[0] = 62.;
+ dgh[0] = 62.2;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU4", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU4", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]+1.), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
// UPPER PART
- dgh[0] = 62.1;
+ dgh[0] = 64.8;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC3", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC3", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[199], "ONLY");
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART
// LOWER PART
- dgh[0] = 62.1;
+ dgh[0] = 64.8;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC4", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC4", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[199], "ONLY");
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - COPPER PART - UPPER PART
-
+
dgh[0] = 46.;
dgh[1] = 46.+1.0;
- dgh[2] = (ztpc-97.5+1.5)/2.;
+// dgh[2] = (ztpc-97.5+1.5-2.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU5", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
-
+ // gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0;
+ dgh[2] = 64.0+1.0;
+ dgh[3] = 46.;
+ dgh[4] = 46.+1.0;
+ dgh[5] = 12.;
+ dgh[6] = 168.;
+ gMC->Gsvolu("ICU9", "CONS", idtmed[213], dgh, 7);
+ gMC->Gspos("ICU9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - COPPER PART - LOWER PART
dgh[0] = 46.;
dgh[1] = 46.+1.0;
- dgh[2] = (ztpc-97.5+1.5)/2.;
+// dgh[2] = (ztpc-97.5+1.5-2.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU6", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
-
+ // gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0;
+ dgh[2] = 64.0+1.0;
+ dgh[3] = 46.;
+ dgh[4] = 46.+1.0;
+ dgh[5] = 192.;
+ dgh[6] = 348.;
+ gMC->Gsvolu("ICU0", "CONS", idtmed[213], dgh, 7);
+ gMC->Gspos("ICU0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - CARBON PART - UPPER PART
dgh[0] = 46.+1.0;
dgh[1] = 46.+1.0+1.5;
- dgh[2] = (ztpc-97.5)/2.;
+// dgh[2] = (ztpc-97.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC5", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
-
+ // gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0+1.0;
+ dgh[2] = 64.0+1.0+1.5;
+ dgh[3] = 46.+1.0;
+ dgh[4] = 46.+1.0+1.5;
+ dgh[5] = 12.;
+ dgh[6] = 168.;
+ gMC->Gsvolu("ICC9", "CONS", idtmed[225], dgh, 7);
+ gMC->Gspos("ICC9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
// --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
// THE ABSORBER - CARBON PART - LOWER PART
dgh[0] = 46.+1.0;
dgh[1] = 46.+1.0+1.5;
- dgh[2] = (ztpc-97.5)/2.;
+// dgh[2] = (ztpc-97.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC6", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ // gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0+1.0;
+ dgh[2] = 64.0+1.0+1.5;
+ dgh[3] = 46.+1.0;
+ dgh[4] = 46.+1.0+1.5;
+ dgh[5] = 192.;
+ dgh[6] = 348.;
+ gMC->Gsvolu("ICC0", "CONS", idtmed[225], dgh, 7);
+ gMC->Gspos("ICC0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
+ // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
+ // THE ABSORBER - ALUMINUM PART - UPPER PART
+
+ dgh[0] = 46.+1.0+1.5;
+ dgh[1] = 46.+1.0+1.5+0.4;
+// dgh[2] = (ztpc-97.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("ICK5", "TUBS", idtmed[210], dgh, 5);
+ // gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICK5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0+1.0+1.5;
+ dgh[2] = 64.0+1.0+1.5+0.4;
+ dgh[3] = 46.+1.0+1.5;
+ dgh[4] = 46.+1.0+1.5+0.4;
+ dgh[5] = 12.;
+ dgh[6] = 168.;
+ gMC->Gsvolu("ICK9", "CONS", idtmed[210], dgh, 7);
+ gMC->Gspos("ICK9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+5.5;
+ dgh[2] = 4.0/2;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("IKK7", "TUBS", idtmed[210], dgh, 5);
+// gMC->Gspos("IKK7", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+ gMC->Gspos("IKK7", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+34+31.8), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+0.3;
+ dgh[2] = 34.0/2;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("IKK5", "TUBS", idtmed[210], dgh, 5);
+// gMC->Gspos("IKK5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4), idrotm[199], "ONLY");
+ gMC->Gspos("IKK5", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+31.8), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+5.5;
+ dgh[2] = 4.0/2;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("IKK3", "TUBS", idtmed[210], dgh, 5);
+// gMC->Gspos("IKK3", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34), idrotm[199], "ONLY");
+ gMC->Gspos("IKK3", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+31.8), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+6.0;
+ dgh[2] = 5.0/2;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("IKK1", "TUBS", idtmed[210], dgh, 5);
+// gMC->Gspos("IKK1", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34-4), idrotm[199], "ONLY");
+ gMC->Gspos("IKK1", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+31.8), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+0.3;
+ dgh[2] = 31.8/2;
+ dgh[3] = 12.;
+ dgh[4] = 168.;
+ gMC->Gsvolu("IKK9", "TUBS", idtmed[210], dgh, 5);
+ gMC->Gspos("IKK9", 1, "ITSV", 0., 0., -(-186.6+dgh[2]), idrotm[199], "ONLY");
+
+
+ dgh[0] = 66.2/2;
+ dgh[1] = 46.+1.0+1.5+0.4+12.5;
+ dgh[2] = 46.+1.0+1.5+0.4+12.5+0.3;
+ dgh[3] = 46.+1.0+1.5+0.4;
+ dgh[4] = 46.+1.0+1.5+0.4+0.3;
+ dgh[5] = 12.;
+ dgh[6] = 168.;
+ gMC->Gsvolu("ICK7", "CONS", idtmed[210], dgh, 7);
+ gMC->Gspos("ICK7", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
+ // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T.
+ // THE ABSORBER - ALUMINUM PART - LOWER PART
+
+ dgh[0] = 46.+1.0+1.5;
+ dgh[1] = 46.+1.0+1.5+0.4;
+// dgh[2] = (ztpc-97.5)/2.;
+ dgh[2] = (186.6 - 101.1)/2.;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("ICK6", "TUBS", idtmed[210], dgh, 5);
+ // gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY");
+ gMC->Gspos("ICK6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+
+ dgh[0] = (ztpc - 1.0 - 186.6)/2.;
+ dgh[1] = 64.0+1.0+1.5;
+ dgh[2] = 64.0+1.0+1.5+0.4;
+ dgh[3] = 46.+1.0+1.5;
+ dgh[4] = 46.+1.0+1.5+0.4;
+ dgh[5] = 192.;
+ dgh[6] = 348.;
+ gMC->Gsvolu("ICK0", "CONS", idtmed[210], dgh, 7);
+ gMC->Gspos("ICK0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+5.5;
+ dgh[2] = 4.0/2;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("IKK8", "TUBS", idtmed[210], dgh, 5);
+// gMC->Gspos("IKK8", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY");
+ gMC->Gspos("IKK8", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+34+31.8), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+0.3;
+ dgh[2] = 34.0/2;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("IKK6", "TUBS", idtmed[210], dgh, 5);
+// gMC->Gspos("IKK6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4), idrotm[199], "ONLY");
+ gMC->Gspos("IKK6", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+31.8), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+5.5;
+ dgh[2] = 4.0/2;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("IKK4", "TUBS", idtmed[210], dgh, 5);
+// gMC->Gspos("IKK4", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34), idrotm[199], "ONLY");
+ gMC->Gspos("IKK4", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+31.8), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+6.0;
+ dgh[2] = 5.0/2;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("IKK2", "TUBS", idtmed[210], dgh, 5);
+// gMC->Gspos("IKK2", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34-4), idrotm[199], "ONLY");
+ gMC->Gspos("IKK2", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+31.8), idrotm[199], "ONLY");
+
+
+ dgh[0] = 46.+1.0+1.5+0.4;
+ dgh[1] = 46.+1.0+1.5+0.4+0.3;
+ dgh[2] = 31.8/2;
+ dgh[3] = 192.;
+ dgh[4] = 348.;
+ gMC->Gsvolu("IKK0", "TUBS", idtmed[210], dgh, 5);
+ gMC->Gspos("IKK0", 1, "ITSV", 0., 0., -(-186.6+dgh[2]), idrotm[199], "ONLY");
+
+
+ dgh[0] = 66.2/2;
+ dgh[1] = 46.+1.0+1.5+0.4+12.5;
+ dgh[2] = 46.+1.0+1.5+0.4+12.5+0.3;
+ dgh[3] = 46.+1.0+1.5+0.4;
+ dgh[4] = 46.+1.0+1.5+0.4+0.3;
+ dgh[5] = 192.;
+ dgh[6] = 348.;
+ gMC->Gsvolu("ICK8", "CONS", idtmed[210], dgh, 7);
+ gMC->Gspos("ICK8", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY");
+
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// COPPER PART - UPPER PART
- dgh[0] = 46.;
+ dgh[0] = 64.0;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICU7", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU7", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICU7", 1, "ITSV", 0., 0., (ztpc+1.5+dgh[2]), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// COPPER PART - LOWER PART
- dgh[0] = 46.;
+ dgh[0] = 64.0;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICU8", "TUBS", idtmed[213], dgh, 5);
- gMC->Gspos("ICU8", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICU8", 1, "ITSV", 0., 0., (ztpc+1.5+dgh[2]), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// CARBON PART - UPPER PART
- dgh[0] = 46.+1.0;
+ dgh[0] = 64.0+1.0;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("ICC7", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC7", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICC7", 1, "ITSV", 0., 0., (ztpc+dgh[2]), idrotm[199], "ONLY");
// --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER
// CARBON PART - LOWER PART
- dgh[0] = 46.+1.0;
+ dgh[0] = 64.0+1.0;
dgh[1] = 74.5;
dgh[2] = 0.75;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("ICC8", "TUBS", idtmed[225], dgh, 5);
- gMC->Gspos("ICC8", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY");
+ gMC->Gspos("ICC8", 1, "ITSV", 0., 0., (ztpc+dgh[2]), idrotm[199], "ONLY");
+
+
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART
- dgh[0] = 74.5;
- dgh[1] = 79.5;
+ dgh[0] = 74.7;
+ dgh[1] = 75.3;
dgh[2] = 2.5;
dgh[3] = 12.;
dgh[4] = 168.;
gMC->Gsvolu("IHK1", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -(-ztpc-dgh[2]), idrotm[199], "ONLY");
// --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART
- dgh[0] = 74.5;
- dgh[1] = 79.5;
+ dgh[0] = 74.7;
+ dgh[1] = 75.3;
dgh[2] = 2.5;
dgh[3] = 192.;
dgh[4] = 348.;
gMC->Gsvolu("IHK2", "TUBS", idtmed[264], dgh, 5);
- gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY");
+ gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -(-ztpc-dgh[2]), idrotm[199], "ONLY");
}
dgh[1] = 8.;
dgh[2] = 190.;
gMC->Gsvolu("IRA1", "BOX ", idtmed[268], dgh, 3);
- gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY");
+ gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., 69.5, idrotm[199], "ONLY");
gMC->Gsvolu("IRA2", "BOX ", idtmed[268], dgh, 3);
- gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY");
+ gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., 69.5, idrotm[199], "ONLY");
dgh[0] = 2.-0.5;// 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
dgh[1] = 8.-0.5;// 0.5 was determined in such a way that the aluminum area is 20.9 cm^2
dgh[1] = 59.;
dgh[2] = 0.6;
gMC->Gsvolu("ICYL", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ICYL", 1, "ALIC", 0., 0., -74.1,idrotm[199], "ONLY");
- gMC->Gspos("ICYL", 2, "ALIC", 0., 0., 74.1, 0, "ONLY");
+ gMC->Gspos("ICYL", 1, "ITSS", 0., 0., -74.1,idrotm[199], "ONLY");
+ gMC->Gspos("ICYL", 2, "ITSS", 0., 0., 74.1, 0, "ONLY");
// --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS
dgh[1] = 3.;
dgh[2] = 5.;// 5. comes from the fact that the volume has to be 567.6/2 cm^3
gMC->Gsvolu("ISR1", "TUBE", idtmed[284], dgh, 3);
- gMC->Gspos("ISR1", 1, "ITSV", 53.4292, 10.7053, 79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 2, "ITSV", 53.4292, -10.7053, 79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 3, "ITSV", -53.4292, 10.7053, 79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 4, "ITSV", -53.4292, -10.7053, 79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 5, "ITSV", 53.4292, 10.7053, -79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 6, "ITSV", 53.4292, -10.7053, -79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 7, "ITSV", -53.4292, 10.7053, -79.75, 0, "ONLY");
- gMC->Gspos("ISR1", 8, "ITSV", -53.4292, -10.7053, -79.75, 0, "ONLY");
+ gMC->Gspos("ISR1", 1, "ITSS", 53.4292, 10.7053, -79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 2, "ITSS", 53.4292, -10.7053, -79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 3, "ITSS", -53.4292, 10.7053, -79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 4, "ITSS", -53.4292, -10.7053, -79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 5, "ITSS", 53.4292, 10.7053, 79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 6, "ITSS", 53.4292, -10.7053, 79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 7, "ITSS", -53.4292, 10.7053, 79.75,idrotm[199],"ONLY");
+ gMC->Gspos("ISR1", 8, "ITSS", -53.4292, -10.7053, 79.75,idrotm[199],"ONLY");
// --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER
dgh[1] = 12.;
dgh[2] = 5.;
gMC->Gsvolu("ISR2", "BOX ", idtmed[210], dgh, 3);
- gMC->Gspos("ISR2", 1, "ITSV", -53.5, 0., -125.5, idrotm[199], "ONLY");
+ gMC->Gspos("ISR2", 1, "ITSS", -53.5, 0., 125.5, 0, "ONLY");
gMC->Gsvolu("ISR3", "BOX ", idtmed[210], dgh, 3);
- gMC->Gspos("ISR3", 1, "ITSV", 53.5, 0., -125.5, idrotm[199], "ONLY");
+ gMC->Gspos("ISR3", 1, "ITSS", 53.5, 0., 125.5, 0, "ONLY");
dgh[0] = 5.-2.;
dgh[1] = 12.-2.;
dgh[1] = 5.;
dgh[2] = 2.;
gMC->Gsvolu("ISR6", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ISR6", 1, "ITSV", 0., 54., -77., idrotm[199], "ONLY");
- gMC->Gspos("ISR6", 2, "ITSV", 0., 54., 77., idrotm[199], "ONLY");
- gMC->Gspos("ISR6", 3, "ITSV", 0., -54., 77., idrotm[199], "ONLY");
+ gMC->Gspos("ISR6", 1, "ITSS", 0., 54., 77., 0, "ONLY");
+ gMC->Gspos("ISR6", 2, "ITSS", 0., 54., -77., 0, "ONLY");
+ gMC->Gspos("ISR6", 3, "ITSS", 0., -54., -77., 0, "ONLY");
}
-
- // --- Outputs the geometry tree in the EUCLID/CAD format
-
- if (fEuclidOut) {
- gMC->WriteEuclid("ITSgeometry", "ITSV", 1, 5);
- }
-
-
{
if (!gGeoManager) {
AliError("TGeoManager doesn't exist !");
// Return:
// none.
- Int_t ifield = gAlice->Field()->Integ();
- Float_t fieldm = gAlice->Field()->Max();
+ Int_t ifield = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ();
+ Float_t fieldm = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max();
Float_t tmaxfd = 0.1; // 1.0; // Degree
Float_t stemax = 1.0; // cm
Float_t aCM55J[4]={12.0107,14.0067,15.9994,1.00794};
Float_t zCM55J[4]={6.,7.,8.,1.};
Float_t wCM55J[4]={0.908508078,0.010387573,0.055957585,0.025146765};
- Float_t dCM55J = 1.63;
+ Float_t dCM55J = 1.8;
//ALCM55J
//Inox
- Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,55.9961,95.94,55.845};
+ Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,95.94,55.845};
Float_t zINOX[9]={6.,25.,14.,15.,16., 28.,24.,42.,26.};
Float_t wINOX[9]={0.0003,0.02,0.01,0.00045,0.0003,0.12,0.17,0.025,0.654};
Float_t dINOX = 8.03;
+ //AISI 304 L (from F.Tosello's web page - M.S. 18 Oct 10)
+
+ Float_t a304L[8]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,55.845};
+ Float_t z304L[8]={6.,25.,14.,15.,16., 28.,24.,26.};
+ Float_t w304L[8]={0.0003,0.02,0.01,0.00045,0.003,0.0925,0.19,0.6865};
+ Float_t d304L = 8.03;
+
//SDD HV microcable
Float_t aHVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
Float_t wALVm[5]={0.392653705471,0.0128595919215,0.041626868025,0.118832707289, 0.431909};
Float_t dALVm = 2.0502;
- //X7R capacitors
+ //X7R capacitors - updated from F.Tosello's web page - M.S. 18 Oct 10
+
+ Float_t aX7R[6]={137.327,47.867,15.9994,58.6928,63.5460,118.710};
+ Float_t zX7R[6]={56.,22.,8.,28.,29.,50.};
+ Float_t wX7R[6]={0.524732,0.176736,0.179282,0.079750,0.019750,0.019750};
+ Float_t dX7R = 6.07914;
+
+ //X7R weld, i.e. Sn 60% Pb 40% (from F.Tosello's web page - M.S. 15 Oct 10)
- Float_t aX7R[7]={137.327,47.867,15.9994,58.6928,63.5460,118.710,207.2};
- Float_t zX7R[7]={56.,22.,8.,28.,29.,50.,82.};
- Float_t wX7R[7]={0.251639432,0.084755042,0.085975822,0.038244751,0.009471271,0.321736471,0.2081768};
- Float_t dX7R = 7.14567;
+ Float_t aX7Rweld[2]={118.71 , 207.20};
+ Float_t zX7Rweld[2]={ 50. , 82. };
+ Float_t wX7Rweld[2]={ 0.60 , 0.40};
+ Float_t dX7Rweld = 8.52358;
// AIR
// rohacell: C9 H13 N1 O2
Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
Float_t zrohac[4] = { 6., 1., 7., 8.};
- Float_t wrohac[4] = { 9., 13., 1., 2.};
- Float_t drohac = 0.05;
+ Float_t wrohac[4] = { 14., 10., 2., 6.};
+ Float_t drohac = 0.052;
// If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then
//
Float_t wInAl[5] = {.816164, .131443,.0330906,.0183836,.000919182};
Float_t dInAl = 3.075;
+ // Aluminum alloy with 12% Copper - 21 Oct 10
+
+ Float_t aAlCu12[2] = {26.9815, 63.546};
+ Float_t zAlCu12[2] = {13. , 29. };
+ Float_t wAlCu12[2] = { 0.88 , 0.12 };
+ Float_t dAlCu12 = 2.96;
+
// Kapton
Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
Float_t zKapton[4]={1.,6.,7.,8.};
Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
Float_t dKapton = 1.42;
+
+ // Kapton + Cu (for Pixel Bus)
+
+ Float_t aKaptonCu[5]={1.00794, 12.0107, 14.010, 15.9994, 63.5460};
+ Float_t zKaptonCu[5]={1., 6., 7., 8., 29.};
+ Float_t wKaptonCuBus[5];
+
+ // Kapton + Cu (for Pixel MCM)
+
+ Float_t wKaptonCuMCM[5];
+
+ // Kapton + Cu (mix of two above)
+
+ Float_t wKaptonCuMix[5];
//SDD ruby sph.
Float_t aAlOxide[2] = { 26.981539,15.9994};
Float_t wAlOxide[2] = {0.4707, 0.5293};
Float_t dAlOxide = 3.97;
+ // Silica for optical fibers: Si O2
+ Float_t aoptfib[2] = { 28.0855, 15.9994};
+ Float_t zoptfib[2] = { 14., 8. };
+ Float_t woptfib[2] = { 1., 2. };
+ Float_t doptfib = 2.55;
+
+ // Tetrafluorethylene-Perfluorpropylene (FEP) - 08 Mar 10
+ Float_t aFEP[2] = { 12.0107, 18.9984};
+ Float_t zFEP[2] = { 6. , 9. };
+ Float_t wFEP[2] = { 1. , 2. };
+ Float_t dFEP = 2.15;
+
+ // PVC (C2H3Cl)n - 08 Jul 10
+ Float_t aPVC[3] = { 12.0107, 1.00794, 35.4527};
+ Float_t zPVC[3] = { 6. , 1. , 35. };
+ Float_t wPVC[3] = { 2. , 3. , 1. };
+ Float_t dPVC = 1.3;
+
+ // PBT (Polybutylene terephthalate = C12-H12-O4) - 01 Sep 10
+ Float_t aPBT[3] = { 12.0107, 1.00794, 15.9994};
+ Float_t zPBT[3] = { 6. , 1. , 8. };
+ Float_t wPBT[3] = { 12. ,12. , 4. };
+ Float_t dPBT = 1.31;
+
+ // POLYAX (POLYAX = C37-H24-O6-N2) - 03 Sep 10
+ Float_t aPOLYAX[4] = { 12.0107, 1.00794, 15.9994, 14.00674};
+ Float_t zPOLYAX[4] = { 6. , 1. , 8. , 7. };
+ Float_t wPOLYAX[4] = { 37. ,24. , 6. , 2. };
+ Float_t dPOLYAX = 1.27;
+
+ // PPS (PPS = C6-H4-S) - 05 Sep 10
+ Float_t aPPS[3] = { 12.0107, 1.00794, 32.066};
+ Float_t zPPS[3] = { 6. , 1. , 16. };
+ Float_t wPPS[3] = { 6. , 4. , 1. };
+ Float_t dPPS = 1.35;
+
+ // Megolon (Polyolefin = (C-H2)n) - 20 Oct 10
+ Float_t aMegolon[2] = { 12.0107, 1.00794};
+ Float_t zMegolon[2] = { 6. , 1. };
+ Float_t wMegolon[2] = { 1. , 2. };
+ Float_t dMegolon = 1.51; // Mean of various types
+
+ // Standard glass (from glassproperties.com/glasses - M.S. 21 Oct 10)
+ Float_t aStdGlass[7] = {15.9994 ,28.0855 ,22.98977 ,40.078 ,
+ 24.305 ,26.981539,39.0983 };
+ Float_t zStdGlass[7] = { 8. ,14. ,11. ,20. ,
+ 12. ,13. ,19. };
+ Float_t wStdGlass[7] = { 0.468377, 0.348239, 0.096441, 0.071469,
+ 0.006030, 0.005293, 0.004151};
+ Float_t dStdGlass = 2.53;
+
+ // Glass Fiber (from F.Tosello's web page - M.S. 15 Oct 10)
+ Float_t aGlass[11] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 ,
+ 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 ,55.845};
+ Float_t zGlass[11] = { 8. ,14. ,20 ,13 , 5 ,
+ 12. ,19 ,11 , 9 ,22 ,26 };
+ Float_t wGlass[11] = { 0.473610, 0.252415, 0.135791, 0.068803, 0.023293,
+ 0.015076, 0.008301, 0.007419, 0.007000, 0.004795, 0.003497};
+ Float_t dGlass = 2.61;
+
+ // Ryton R-4 04 (from F.Tosello's web page - M.S. 15 Oct 10)
+ Float_t aRyton[14] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 ,
+ 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 ,
+ 55.845 ,12.0107 , 1.00794 ,32.066 };
+ Float_t zRyton[14] = { 8. ,14. ,20. ,13. , 5. ,
+ 12. ,19. ,11. , 9. ,22. ,
+ 26. , 6. , 1. ,16. };
+ Float_t wRyton[14] = { 0.189445, 0.100966, 0.054316, 0.027521, 0.009317,
+ 0.006030, 0.003320, 0.002968, 0.002800, 0.001918,
+ 0.001399, 0.399760, 0.022365, 0.177875};
+ Float_t dRyton = 1.65;
+
+ // Plexiglas (Poly(methyl methacrylate) (C5O2H8)n - M.S. 05 nov 10)
+ Float_t aPlexy[3] = { 12.0107, 15.9994, 1.00794};
+ Float_t zPlexy[3] = { 6. , 8. , 1. };
+ Float_t wPlexy[3] = { 5. , 2. , 8. };
+ Float_t dPlexy = 1.18;
+
+ //SSD NiSn capacitor ends
+ Float_t aNiSn[2] = { 56.6934,118.710};
+ Float_t zNiSn[2] = { 28., 50.};
+ Float_t wNiSn[2] = {0.33, 0.67};
+ Float_t dNiSn = wNiSn[0]*8.908 + wNiSn[1]*7.310;
+
AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(1,"SI$",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
AliMixture(27,"GEN Air$",aAir,zAir,dAir,4,wAir);
AliMedium(27,"GEN Air$",27,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
+ AliMixture(35,"PLEXYGLAS$",aPlexy,zPlexy,dPlexy,-3,wPlexy);
+ AliMedium(35,"PLEXYGLAS$",35,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(36,"STDGLASS$",aStdGlass,zStdGlass,dStdGlass,7,wStdGlass);
+ AliMedium(36,"STDGLASS$",36,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(37,"ALCU12$",aAlCu12,zAlCu12,dAlCu12,2,wAlCu12);
+ AliMedium(37,"ALCU12$",37,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(38,"MEGOLON$",aMegolon,zMegolon,dMegolon,-2,wMegolon);
+ AliMedium(38,"MEGOLON$",38,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(39,"RYTON$",aRyton,zRyton,dRyton,14,wRyton);
+ AliMedium(39,"RYTON$",39,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(40,"GLASS FIBER$",aGlass,zGlass,dGlass,11,wGlass);
+ AliMedium(40,"GLASS FIBER$",40,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(41,"AISI304L$",a304L,z304L,d304L,8,w304L);
+ AliMedium(41,"AISI304L$",41,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(42,"NICKEL$",0.58693E+02,0.28000E+02,0.89080E+01,0.14200E+01,0.99900E+03);
+ AliMedium(42,"NICKEL$",42,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(43,"SDD X7R weld$",aX7Rweld,zX7Rweld,dX7Rweld,2,wX7Rweld);
+ AliMedium(43,"SDD X7R weld$",43,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(44,"PPS$",aPPS,zPPS,dPPS,-3,wPPS);
+ AliMedium(44,"PPS$",44,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(45,"POLYAX$",aPOLYAX,zPOLYAX,dPOLYAX,-4,wPOLYAX);
+ AliMedium(45,"POLYAX$",45,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(46,"PBT$",aPBT,zPBT,dPBT,-3,wPBT);
+ AliMedium(46,"PBT$",46,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(47,"PVC$",aPVC,zPVC,dPVC,-3,wPVC);
+ AliMedium(47,"PVC$",47,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ Double_t cuFrac = 0.56;
+ Double_t kFrac = 1.0 - cuFrac;
+ Double_t cuDens = 8.96;
+ Float_t dKaptonCuBus = cuFrac * cuDens + kFrac * dKapton;
+ for (Int_t j=0; j<4; j++)
+ wKaptonCuBus[j] = wKapton[j]*kFrac;
+ wKaptonCuBus[4] = cuFrac;
+ AliMixture(48, "SPD-BUS CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuBus, 5, wKaptonCuBus);
+ AliMedium(48,"SPD-BUS CU KAPTON$",48,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ cuFrac = 0.5;
+ kFrac = 1.0 - cuFrac;
+ Float_t dKaptonCuMCM = cuFrac * cuDens + kFrac * dKapton;
+ for (Int_t j=0; j<4; j++)
+ wKaptonCuMCM[j] = wKapton[j]*kFrac;
+ wKaptonCuMCM[4] = cuFrac;
+ AliMixture(49, "SPD-MCM CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMCM, 5, wKaptonCuMCM);
+ AliMedium(49,"SPD-MCM CU KAPTON$",49,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ cuFrac = (0.56 + 0.5) / 2.0;
+ kFrac = 1.0 - cuFrac;
+ Float_t dKaptonCuMix = cuFrac * cuDens + kFrac * dKapton;
+ for (Int_t j=0; j<4; j++)
+ wKaptonCuMix[j] = wKapton[j]*kFrac;
+ wKaptonCuMix[4] = cuFrac;
+ AliMixture(50, "SPD-MIX CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMix, 5, wKaptonCuMix);
+ AliMedium(50,"SPD-MIX CU KAPTON$",50,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(51,"SPD SI$",51,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
AliMixture(56, "SPD KAPTON(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ // Gaseous Freon has same chemical composition but air density at 1.7 atm
+ AliMixture(59,"GASEOUS FREON$",afre,zfre,1.7*dAir,-2,wfre);
+ AliMedium(59,"GASEOUS FREON$",59,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
AliMixture(61,"EPOXY$",aEpoxy,zEpoxy,dEpoxy,-3,wEpoxy);
AliMedium(61,"EPOXY$",61,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(65,"INOX$",aINOX,zINOX,dINOX,9,wINOX);
AliMedium(65,"INOX$",65,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+ AliMixture(66,"NiSn$",aNiSn,zNiSn,dNiSn,2,wNiSn);
+ AliMedium(66,"NiSn$",66,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMaterial(67,"Sn$", 118.710, 50., 7.310, 1.206, 999.);
+ AliMedium(67,"Sn$",67,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
AliMixture(68,"ROHACELL$",arohac,zrohac,drohac,-4,wrohac);
AliMedium(68,"ROHACELL$",68,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(76,"SPDBUS(AL+KPT+EPOX)$",aSPDbus,zSPDbus,dSPDbus,5,wSPDbus);
AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMixture(77,"SDD X7R capacitors$",aX7R,zX7R,dX7R,7,wX7R);
+ AliMixture(77,"SDD X7R capacitors$",aX7R,zX7R,dX7R,6,wX7R);
AliMedium(77,"SDD X7R capacitors$",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide);
// Special media
- AliMaterial(90,"SPD shield$", 12.011, 6., 1.93/10. , 22.1*10., 999);
+ AliMaterial(90,"SPD shield$", 12.011, 6., 1.93 , 22.36, 999);
AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
// SPD End Ladder (data from Petra Riedler)
*/
AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
-}
-//______________________________________________________________________
-void AliITSv11Hybrid::InitAliITSgeom(){
- // Based on the geometry tree defined in Geant 3.21, this
- // routine initilizes the Class AliITSgeom from the Geant 3.21 ITS geometry
- // sturture.
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
+ AliMixture(98,"SDD OPTICFIB$",aoptfib,zoptfib,doptfib,-2,woptfib);
+ AliMedium(98,"SDD OPTICFIB$",98,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ AliMixture(95,"SSD FEP$",aFEP,zFEP,dFEP,-2,wFEP);
+ AliMedium(95,"SSD FEP$",95,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // Mean material for low-voltage cables on SPD trays Side A
+ // (Copper + PolyEthylene (C2-H4)) (D.Elia for cable number and
+ // cross-section area, M.Sitta for elemental computation) - 26 Feb 10
+ wW[0] = 0.323024;//H
+ wW[2] = 0.515464;//Cu
+ wW[1] = 0.161512;//C
+ wW[3] = 0.000000;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 5.078866;
+ AliMixture(60,"SPD_LOWCABLES$",aA,zZ,den,+3,wW);
+ AliMedium(60,"SPD_LOWCABLES$",60,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
- Error("InitAliITSgeom", "QQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQq Im I used?");
-
- /*
- const Int_t knlayers = 6;
- const Int_t kndeep = 3;
- const AliITSDetector kidet[knlayers]={kSPD,kSPD,kSDD,kSDD,kSSD,kSSD};
- const TString knames[2][knlayers] = {
- {"/ALIC_1/ITSV_1/ITSD_1/IT12_1/I12A_%d/I10A_%d/I103_%d/I101_1/ITS1_1", // lay=1
- "/ALIC_1/ITSV_1/ITSD_1/IT12_1/I12A_%d/I20A_%d/I1D3_%d/I1D1_1/ITS2_1", // lay=2
- "/ALIC_1/ITSV_1/ITSD_1/IT34_1/I004_%d/I302_%d/ITS3_%d", // lay=3
- "/ALIC_1/ITSV_1/ITSD_1/IT34_1/I005_%d/I402_%d/ITS4_%d", // lay=4
- "/ALIC_1/ITSV_1/ITSD_1/IT56_1/I565_%d/I562_%d/ITS5_%d", // lay=5
- "/ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_%d/I566_%d/ITS6_%d"},// lay=6
- {"/ALIC_1/ITSV_1/ITSD_1/IT12_1/I12B_%d/I10B_%d/I107_%d/I101_1/ITS1_1", // lay=1
- "/ALIC_1/ITSV_1/ITSD_1/IT12_1/I12B_%d/I20B_%d/I1D7_%d/I1D1_1/ITS2_1", // lay=2
- "/ALIC_1/ITSV_1/ITSD_1/IT34_1/I004_%d/I302_%d/ITS3_%d", // lay=3
- "/ALIC_1/ITSV_1/ITSD_1/IT34_1/I005_%d/I402_%d/ITS4_%d", // lay=4
- "/ALIC_1/ITSV_1/ITSD_1/IT56_1/I565_%d/I562_%d/ITS5_%d", // lay=5
- "/ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_%d/I566_%d/ITS6_%d"}
- };
- const Int_t kitsGeomTreeCopys[knlayers][kndeep]= {{10, 2, 4},// lay=1
- {10, 4, 4},// lay=2
- {14, 6, 1},// lay=3
- {22, 8, 1},// lay=4
- {34,22, 1},// lay=5
- {38,25, 1}};//lay=6
- Int_t nlad[knlayers],ndet[knlayers];
- Int_t mod,lay,lad=0,det=0,i,j,k,cp0,cp1,cp2;
- TString path,shapeName;
- TGeoHMatrix materix;
- Double_t trans[3]={3*0.0},rot[10]={9*0.0,1.0};
- TArrayD shapePar;
- TArrayF shapeParF;
- Bool_t shapeDefined[3]={kFALSE,kFALSE,kFALSE};
-
- AliDebug(1,"Reading Geometry transformation directly from Modler.");
- mod = 0;
- for(i=0;i<knlayers;i++){
- k = 1;
- for(j=0;j<kndeep;j++) if(kitsGeomTreeCopys[i][j]!=0)
- k *= TMath::Abs(kitsGeomTreeCopys[i][j]);
- mod += k;
- } // end for i
+ // Mean material for high-voltage cables on SPD trays Side A & C
+ // (Copper + HD PolyEthylene (C2-H2)) (D.Elia for cable number and
+ // cross-section area, M.Sitta for elemental computation) - 10 Jun 10
+ wW[0] = 0.083766;//H
+ wW[2] = 0.417136;//Cu
+ wW[1] = 0.499098;//C
+ wW[3] = 0.000000;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 1.514930;
+ AliMixture(58,"SPD_HICABLES$",aA,zZ,den,+3,wW);
+ AliMedium(58,"SPD_HICABLES$",58,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
- SetITSgeom(0);
- nlad[0]=20;nlad[1]=40;nlad[2]=14;nlad[3]=22;nlad[4]=34;nlad[5]=38;
- ndet[0]= 4;ndet[1]= 4;ndet[2]= 6;ndet[3]= 8;ndet[4]=22;ndet[5]=25;
- AliITSgeom* geom = new AliITSgeom(0,6,nlad,ndet,mod);
- SetITSgeom(geom);
- mod = 0;
- for(lay=1;lay<=knlayers;lay++){
- for(cp0=1;cp0<=kitsGeomTreeCopys[lay-1][0];cp0++){
- for(cp1=1;cp1<=kitsGeomTreeCopys[lay-1][1];cp1++){
- for(cp2=1;cp2<=kitsGeomTreeCopys[lay-1][2];cp2++){
- path.Form(knames[fMinorVersion-1][lay-1].Data(),
- cp0,cp1,cp2);
- switch (lay){
- case 1:{
- det = cp2;
- lad = cp1+2*(cp0-1);
- }break;
- case 2:{
- det = cp2;
- lad = cp1+4*(cp0-1);
- } break;
- case 3: case 4: case 5: case 6:{
- det = cp1;
- lad = cp0;
- } break;
- } // end switch
- //AliInfo(Form("path=%s lay=%d lad=%d det=%d",
- // path.Data(),lay,lad,det));
- gMC->GetTransformation(path.Data(),materix);
- gMC->GetShape(path.Data(),shapeName,shapePar);
- shapeParF.Set(shapePar.GetSize());
- for(i=0;i<shapePar.GetSize();i++) shapeParF[i]=shapePar[i];
- geom->CreateMatrix(mod,lay,lad,det,kidet[lay-1],trans,rot);
- geom->SetTrans(mod,materix.GetTranslation());
- geom->SetRotMatrix(mod,materix.GetRotationMatrix());
- geom->GetGeomMatrix(mod)->SetPath(path.Data());
- switch (lay){
- case 1: case 2:
- if(!shapeDefined[kSPD]){
- geom->ReSetShape(kSPD,new AliITSgeomSPD425Short(
- shapeParF.GetSize(),shapeParF.GetArray()));
- shapeDefined[kSPD] = kTRUE;
- }break;
- case 3: case 4:
- if(!shapeDefined[kSDD]){
- geom->ReSetShape(kSDD,new AliITSgeomSDD256(
- shapeParF.GetSize(),shapeParF.GetArray()));
- shapeDefined[kSDD] = kTRUE;
- }break;
- case 5: case 6:
- if(!shapeDefined[kSSD]){
- geom->ReSetShape(kSSD,new AliITSgeomSSD75and275(
- shapeParF.GetSize(),shapeParF.GetArray()));
- shapeDefined[kSSD] = kTRUE;
- }break;
- default:{
- }break;
- } // end switch
- mod++;
- } /// end for cp2
- } // end for cp1
- } // end for cp0
- } // end for lay
- return;
- */
+ // PolyUrethane [C25-H42-N2-O6] - 07 Mar 10
+ zZ[2] = 7.0; aA[2] = 14.0067; // Nitrogen - From Root TGeoElementTable
+
+ wW[0] = 0.090724;//H
+ wW[2] = 0.060035;//N
+ wW[1] = 0.643513;//C
+ wW[3] = 0.205728;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 1.158910;
+ AliMixture(67,"POLYURETHANE$",aA,zZ,den,+4,wW);
+ AliMedium(67,"POLYURETHANE$",67,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+
+ // POM (Polyoxymethylene = (CH2O)n ) - 02 May 10
+ zZ[2] = 8.0; aA[2] = 15.9994; // Oxigen
+
+ wW[0] = 0.067137;//H
+ wW[1] = 0.400016;//C
+ wW[2] = 0.532847;//O
+ wW[3] = 0.000000;//O
+ wW[4] = 0.000000;//S
+ wW[5] = 0.000000;//F
+ wW[6] = 0.000000;//Sn
+ wW[7] = 0.000000;//Pb
+ wW[8] = 0.000000;//Cr
+ wW[9] = 0.000000;//Si
+ wW[10] = 0.000000;//Ni
+ wW[11] = 0.000000;//Ca
+
+ den = 1.4200;
+ AliMixture(57,"POLYOXYMETHYLENE$",aA,zZ,den,+3,wW);
+ AliMedium(57,"POLYOXYMETHYLENE$",57,0,ifield,fieldm,tmaxfd,stemax,
+ deemax,epsil,stmin);
+
+
+ // Anticorodal (Aliminum alloy) - 08 nov 10
+ // A,Z from Root TGeoElementTable, W from Web sites
+ zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
+ zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
+ zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
+ zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
+ zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
+ zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
+ zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
+ zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
+ zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
+
+ wW[1] = 0.001000;//Cu
+ wW[2] = 0.005000;//Fe
+ wW[3] = 0.007000;//Mn - mean value
+ wW[4] = 0.009000;//Mg - mean value
+ wW[5] = 0.001000;//Si - mean value
+ wW[6] = 0.002000;//Zn
+ wW[7] = 0.002500;//Cr
+ wW[8] = 0.001000;//Ti
+
+ Double_t totFrac = 0;
+ for (Int_t j=1; j<9; j++)
+ totFrac += wW[j];
+ wW[0] = 1. - totFrac;//Al - the remainder
+
+ den = 2.69;
+ AliMixture(93,"ANTICORODAL$",aA,zZ,den,+9,wW);
+ AliMedium(93,"ANTICORODAL$",93,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // Hokotol (another Aluminium alloy) - 08 nov 10
+ // A,Z from Root TGeoElementTable, W from Web sites
+ zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
+ zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
+ zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
+ zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
+ zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
+ zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
+ zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
+ zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
+ zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
+ zZ[9] = 40.0; aA[9] = 91.224 ; // Zirconium
+
+ wW[1] = 0.020500;//Cu - mean value
+ wW[2] = 0.000300;//Fe
+ wW[3] = 0.022000;//Mn - mean value
+ wW[4] = 0.001000;//Mg - mean value
+ wW[5] = 0.002000;//Si - mean value
+ wW[6] = 0.066500;//Zn
+ wW[7] = 0.005000;//Cr
+ wW[8] = 0.000600;//Ti
+ wW[9] = 0.001650;//Zr - mean value
+
+ totFrac = 0;
+ for (Int_t j=1; j<10; j++)
+ totFrac += wW[j];
+ wW[0] = 1. - totFrac;//Al - the remainder
+
+ den = 2.69;
+ AliMixture(34,"HOKOTOL$",aA,zZ,den,+10,wW);
+ AliMedium(34,"HOKOTOL$",34,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
+ // Ergal (7075) (yet another Aluminium alloy) - 09 nov 10
+ // A,Z from Root TGeoElementTable, W from Web sites
+ zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
+ zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
+ zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
+ zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
+ zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
+ zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
+ zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
+ zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
+ zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
+
+ wW[1] = 0.016000;//Cu - mean value
+ wW[2] = 0.005000;//Fe
+ wW[3] = 0.003000;//Mn
+ wW[4] = 0.025000;//Mg - mean value
+ wW[5] = 0.004000;//Si
+ wW[6] = 0.056000;//Zn - mean value
+ wW[7] = 0.002300;//Cr - mean value
+ wW[8] = 0.002000;//Ti
+
+ totFrac = 0;
+ for (Int_t j=1; j<9; j++)
+ totFrac += wW[j];
+ wW[0] = 1. - totFrac;//Al - the remainder
+
+ den = 2.69;
+ AliMixture(33,"ERGAL$",aA,zZ,den,+9,wW);
+ AliMedium(33,"ERGAL$",33,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
+
}
//______________________________________________________________________
fMinorVersion));
UpdateInternalGeometry();
AliITS::Init();
- if(fGeomDetOut) GetITSgeom()->WriteNewFile(fWrite);
fIDMother = gMC->VolId("ITSV"); // ITS Mother Volume ID.
}
// Return:
// none.
- const Float_t kconv = 1.0e+04; // convert cm to microns
-
if(!fDetTypeSim){
Warning("SetDefaults","Error fDetTypeSim not defined");
return;
}
- AliITSgeomSPD *s0;
- AliITSgeomSDD *s1;
- AliITSgeomSSD *s2;
- Int_t i;
- Float_t bx[256],bz[280];
-
fDetTypeSim->SetDefaults();
- //SPD
- s0 = (AliITSgeomSPD*) GetITSgeom()->GetShape(kSPD);
- // Get shape info. Do it this way for now.
- //AliITSCalibrationSPD* resp0=new AliITSCalibrationSPD();
- AliITSsegmentationSPD* seg0 =
- (AliITSsegmentationSPD*)fDetTypeSim->GetSegmentationModel(0);
- seg0->SetDetSize(s0->GetDx()*2.*kconv, // base this on AliITSgeomSPD
- s0->GetDz()*2.*kconv, // for now.
- s0->GetDy()*2.*kconv); // x,z,y full width in microns.
- seg0->SetNPads(256,160);// Number of Bins in x and z
- for(i=000;i<256;i++) bx[i] = 50.0; // in x all are 50 microns.
- for(i=000;i<160;i++) bz[i] = 425.0; // most are 425 microns except below
- for(i=160;i<280;i++) bz[i] = 0.0; // Outside of detector.
- bz[ 31] = bz[ 32] = 625.0; // first chip boundry
- bz[ 63] = bz[ 64] = 625.0; // first chip boundry
- bz[ 95] = bz[ 96] = 625.0; // first chip boundry
- bz[127] = bz[128] = 625.0; // first chip boundry
- bz[160] = 425.0; // Set so that there is no zero pixel size for fNz.
- seg0->SetBinSize(bx,bz); // Based on AliITSgeomSPD for now.
- SetSegmentationModel(kSPD,seg0);
- // set digit and raw cluster classes to be used
- const char *kData0=(fDetTypeSim->GetCalibrationModel(
- GetITSgeom()->GetStartSPD()))->DataType();
- if (strstr(kData0,"real")) fDetTypeSim->SetDigitClassName(kSPD,
- "AliITSdigit");
- else fDetTypeSim->SetDigitClassName(kSPD,"AliITSdigitSPD");
- // SDD
- s1 = (AliITSgeomSDD*) GetITSgeom()->GetShape(kSDD);
- // Get shape info. Do it this way for now.
-
- //AliITSCalibrationSDD* resp1=new AliITSCalibrationSDD("simulated");
- AliITSsegmentationSDD* seg1 =
- (AliITSsegmentationSDD*)fDetTypeSim->GetSegmentationModel(1);
- seg1->SetDetSize(s1->GetDx()*kconv, // base this on AliITSgeomSDD
- s1->GetDz()*2.*kconv, // for now.
- s1->GetDy()*2.*kconv); // x,z,y full width in microns.
- seg1->SetNPads(256,256);// Use AliITSgeomSDD for now
- SetSegmentationModel(kSDD,seg1);
- const char *kData1=(fDetTypeSim->GetCalibrationModel(
- GetITSgeom()->GetStartSDD()))->DataType();
- AliITSCalibrationSDD* rsp =
- (AliITSCalibrationSDD*)fDetTypeSim->GetCalibrationModel(
- GetITSgeom()->GetStartSDD());
- const char *kopt=rsp->GetZeroSuppOption();
- if((!strstr(kopt,"2D")) && (!strstr(kopt,"1D")) || strstr(kData1,"real") ){
- fDetTypeSim->SetDigitClassName(kSDD,"AliITSdigit");
- } else fDetTypeSim->SetDigitClassName(kSDD,"AliITSdigitSDD");
- // SSD Layer 5
-
- s2 = (AliITSgeomSSD*) GetITSgeom()->GetShape(kSSD);
- // Get shape info. Do it this way for now.
-
-
- //SetCalibrationModel(GetITSgeom()->GetStartSSD(),
- // new AliITSCalibrationSSD("simulated"));
- AliITSsegmentationSSD* seg2 =
- (AliITSsegmentationSSD*)fDetTypeSim->GetSegmentationModel(2);
- seg2->SetDetSize(s2->GetDx()*2.*kconv, // base this on AliITSgeomSSD
- s2->GetDz()*2.*kconv, // for now.
- s2->GetDy()*2.*kconv); // x,z,y full width in microns.
- seg2->SetPadSize(95.,0.); // strip x pitch in microns
- seg2->SetNPads(768,0); // number of strips on each side.
- seg2->SetAngles(0.0075,0.0275); // strip angels rad P and N side.
- seg2->SetAnglesLay5(0.0075,0.0275); // strip angels rad P and N side.
- seg2->SetAnglesLay6(0.0275,0.0075); // strip angels rad P and N side.
- SetSegmentationModel(kSSD,seg2);
- const char *kData2=(fDetTypeSim->GetCalibrationModel(
- GetITSgeom()->GetStartSSD()))->DataType();
- if(strstr(kData2,"real") ) fDetTypeSim->SetDigitClassName(kSSD,
- "AliITSdigit");
- else fDetTypeSim->SetDigitClassName(kSSD,"AliITSdigitSSD");
+
if(fgkNTYPES>3){
Warning("SetDefaults",
"Only the four basic detector types are initialised!");
}// end if
return;
}
-//______________________________________________________________________
-void AliITSv11Hybrid::DrawModule() const{
- // Draw a shaded view of the FMD version 10.
- // Inputs:
- // none.
- // Outputs:
- // none.
- // Return:
- // none.
-
- // Set everything unseen
- gMC->Gsatt("*", "seen", -1);
- //
- // Set ALIC mother visible
- gMC->Gsatt("ALIC","SEEN",0);
- //
- // Set the volumes visible
- gMC->Gsatt("ITSD","SEEN",0);
- gMC->Gsatt("ITS1","SEEN",1);
- gMC->Gsatt("ITS2","SEEN",1);
- gMC->Gsatt("ITS3","SEEN",1);
- gMC->Gsatt("ITS4","SEEN",1);
- gMC->Gsatt("ITS5","SEEN",1);
- gMC->Gsatt("ITS6","SEEN",1);
- //
- gMC->Gsatt("IPCB","SEEN",1);
- gMC->Gsatt("ICO2","SEEN",1);
- gMC->Gsatt("ICER","SEEN",0);
- gMC->Gsatt("ISI2","SEEN",0);
- gMC->Gsatt("IPLA","SEEN",0);
- gMC->Gsatt("ICO3","SEEN",0);
- gMC->Gsatt("IEPX","SEEN",0);
- gMC->Gsatt("ISI3","SEEN",1);
- gMC->Gsatt("ISUP","SEEN",0);
- gMC->Gsatt("ICHO","SEEN",0);
- gMC->Gsatt("ICMO","SEEN",0);
- gMC->Gsatt("ICMD","SEEN",0);
- gMC->Gsatt("ICCO","SEEN",1);
- gMC->Gsatt("ICCM","SEEN",0);
- gMC->Gsatt("ITMD","SEEN",0);
- gMC->Gsatt("ITTT","SEEN",1);
- //
- gMC->Gdopt("hide", "on");
- gMC->Gdopt("shad", "on");
- gMC->Gsatt("*", "fill", 7);
- gMC->SetClipBox(".");
- gMC->SetClipBox("*", 0, 300, -300, 300, -300, 300);
- gMC->DefaultRange();
- gMC->Gdraw("alic", 40, 30, 0, 11, 10, .07, .07);
- gMC->Gdhead(1111, "Inner Tracking System Version 1");
- gMC->Gdman(17, 6, "MAN");
-}
-
//______________________________________________________________________
void AliITSv11Hybrid::StepManager(){
// Called for every step in the ITS, then calles the AliITShit class
Int_t copy, lay = 0;
Int_t id = gMC->CurrentVolID(copy);
- Bool_t notSens;
- while ((notSens = id != fIdSens[lay]) && (lay<fIdN)) ++lay;
+ Bool_t notSens = kFALSE;
+ while ((lay<fIdN) && (notSens = id != fIdSens[lay])) ++lay;
if (notSens) return;
if(gMC->IsTrackExiting()) {
// We should not need to pass by the switch !
// This is time consuming...
// therefore DecodeDetectorv11Hybrid(...) shouldn't be private !
+ // and we should be able to use instead :
//fInitGeom.DecodeDetectorv11Hybrid(mod,lay+1,cpn0,cpn1,copy);
//
return;
}
+