// See AliITSvPPRasymmFMD::StepManager().
-#include <Riostream.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-#include <TBRIK.h>
-#include <TCanvas.h>
#include <TClonesArray.h>
-#include <TFile.h> // only required for Tracking function?
#include <TGeometry.h>
#include <TLorentzVector.h>
-#include <TMath.h>
+#include <TGeoMatrix.h>
+#include <TArrayD.h>
+#include <TArrayF.h>
+#include <TString.h>
#include <TNode.h>
-#include <TObjArray.h>
-#include <TObjString.h>
-#include <TPCON.h>
-#include <TSystem.h>
#include <TTUBE.h>
-#include <TTUBS.h>
-#include <TVirtualMC.h>
+#include <TGeoManager.h>
+#include <TGeoVolume.h>
-#include "AliConst.h"
#include "AliITS.h"
-#include "AliITSClusterFinderSDD.h"
-#include "AliITSClusterFinderSPD.h"
-#include "AliITSClusterFinderSSD.h"
-#include "AliITSDetType.h"
+#include "AliITSDetTypeSim.h"
#include "AliITSGeant3Geometry.h"
#include "AliITSgeom.h"
#include "AliITSgeomSDD.h"
#include "AliITSgeomSSD.h"
#include "AliITShit.h"
#include "AliITSresponseSDD.h"
-#include "AliITSresponseSPD.h"
-#include "AliITSresponseSSD.h"
+#include "AliITSCalibrationSDD.h"
+#include "AliITSCalibrationSPD.h"
+#include "AliITSCalibrationSSD.h"
#include "AliITSsegmentationSDD.h"
#include "AliITSsegmentationSPD.h"
#include "AliITSsegmentationSSD.h"
-#include "AliITSsimulationSDD.h"
-#include "AliITSsimulationSPD.h"
-#include "AliITSsimulationSSD.h"
#include "AliITSvPPRasymmFMD.h"
+#include "AliLog.h"
+#include "AliMC.h"
#include "AliMagF.h"
#include "AliRun.h"
#include "AliTrackReference.h"
+
+#define GEANTGEOMETRY kTRUE
+
ClassImp(AliITSvPPRasymmFMD)
//______________________________________________________________________
fIdSens = 0;
fEuclidOut = kFALSE; // Don't write Euclide file
fGeomDetOut = kFALSE; // Don't write .det file
- fGeomDetIn = kFALSE; // Don't Read .det file
+ fGeomDetIn = kFALSE; // Read .det file
fMajorVersion = IsVersion();
fMinorVersion = -1;
for(i=0;i<60;i++) fRead[i] = '\0';
for(i=0;i<60;i++) fWrite[i] = '\0';
for(i=0;i<60;i++) fEuclidGeomDet[i] = '\0';
+ strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
}
//______________________________________________________________________
AliITSvPPRasymmFMD::AliITSvPPRasymmFMD(const char *name, const char *title)
fIdN = 6;
fIdName = new TString[fIdN];
+ fIdName[0] = name; // removes warning message
fIdName[0] = "ITS1";
fIdName[1] = "ITS2";
fIdName[2] = "ITS3";
fMinorVersion = 2;
fEuclidOut = kFALSE; // Don't write Euclide file
fGeomDetOut = kFALSE; // Don't write .det file
- fGeomDetIn = kFALSE; // Don't Read .det file
+ fGeomDetIn = kFALSE; // Read .det file
SetThicknessDet1();
SetThicknessDet2();
SetThicknessChip1();
strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
strncpy(fRead,fEuclidGeomDet,60);
strncpy(fWrite,fEuclidGeomDet,60);
+ strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
}
//______________________________________________________________________
-AliITSvPPRasymmFMD::AliITSvPPRasymmFMD(const AliITSvPPRasymmFMD &source){
+AliITSvPPRasymmFMD::AliITSvPPRasymmFMD(const AliITSvPPRasymmFMD &source) :
+ AliITS(source){
// Copy Constructor for ITS version 10. This function is not to be
// used. If any other instance of this function, other than "this" is
// passed, an error message is returned.
dchip2 = GetThicknessChip2();
if(ddet1 < 100. || ddet1 > 300.) {
- cout << "ITS - WARNING: the detector thickness for layer 1 is outside "
- "the range of [100,300] microns. The default value of 200 microns "
- "will be used." << endl;
+ AliWarning("The detector thickness for layer 1 is outside ");
+ AliWarning("the range of [100,300] microns. The default value of 200 microns ");
+ AliWarning("will be used.");
ddet1=200.;
} // end if
if(ddet2 < 100. || ddet2 > 300.) {
- cout << "ITS - WARNING: the detector thickness for layer 2 is outside "
- "the range of [100,300] microns. The default value of 200 microns "
- "will be used." << endl;
+ AliWarning("The detector thickness for layer 2 is outside ");
+ AliWarning("the range of [100,300] microns. The default value of 200 microns ");
+ AliWarning("will be used.");
ddet2=200.;
}// end if
if(dchip1 < 100. || dchip1 > 300.) {
- cout << "ITS - WARNING: the chip thickness for layer 1 is outside "
- "the range of [100,300] microns. The default value of 200 microns "
- "will be used." << endl;
- dchip1=200.;
+ AliWarning("The chip thickness for layer 1 is outside");
+ AliWarning("the range of [100,300] microns. The default value of 200 microns");
+ AliWarning("will be used.");
+ dchip1=200.;
}// end if
if(dchip2 < 100. || dchip2 > 300.) {
- cout << "ITS - WARNING: the chip thickness for layer 2 is outside "
- "the range of [100,300] microns. The default value of 200 microns"
- " will be used." << endl;
- dchip2=200.;
+ AliWarning("The chip thickness for layer 2 is outside");
+ AliWarning("the range of [100,300] microns. The default value of 200 microns");
+ AliWarning("will be used");
+ dchip2=200.;
}// end if
Int_t rails = 1; // flag for rails (1 --> rails in; 0 --> rails out)
-
- Int_t fluid = 1; // flag for the cooling fluid (1 --> water; 0 --> freon)
+ Int_t fluid = 1; // flag for the cooling fluid (1 --> water; 0 --> freon)
+ // This option is maintained for SDD and SSD only
+ // For SPD the cooling liquid is C4F10
rails = GetRails();
fluid = GetCoolingFluid();
if(rails != 0 && rails != 1) {
- cout << "ITS - WARNING: the switch for rails is not set neither "
- "to 0 (rails out) nor to 1 (rails in). The default value of "
- "1 (rails in) will be used." << endl;
+ AliWarning("The switch for rails is not set neither");
+ AliWarning("to 0 (rails out) nor to 1 (rails in). The default value of");
+ AliWarning("1 (rails in) will be used");
+ rails=1;
}// end if
- if(fluid != 0 && fluid != 1) {
- cout << "ITS - WARNING: the switch for cooling fluid is not set "
- "neither to 0 (freon) nor to 1 (water). The default value of "
- "1 (water) will be used." << endl;
- }// end if
- cout << "ITS: Detector thickness on layer 1 is set to " <<
- ddet1 << " microns." << endl;
- cout << "ITS: Chip thickness on layer 1 is set to " <<
- dchip1 << " microns." << endl;
- cout << "ITS: Detector thickness on layer 2 is set to " <<
- ddet2 << " microns." << endl;
- cout << "ITS: Chip thickness on layer 2 is set to " <<
- dchip2 << " microns." << endl;
+ AliInfo(Form("Detector thickness on layer 1 is set to %f microns",ddet1));
+ AliInfo(Form("Chip thickness on layer 1 is set to %f microns",dchip1));
+ AliInfo(Form("Detector thickness on layer 2 is set to %f microns",ddet2));
+ AliInfo(Form("Chip thickness on layer 2 is set to %f microns",dchip2));
if(rails == 0 ) {
- cout << "ITS: Rails are out." << endl;
- } else {
- cout << "ITS: Rails are in." << endl;
- }// end if
- if(fluid == 0 ) {
- cout << "ITS: The cooling fluid is freon." << endl;
+ AliInfo("Rails are out.");
} else {
- cout << "ITS: The cooling fluid is water." << endl;
+ AliInfo("Rails are in.");
}// end if
ddet1 = ddet1*0.0001/2.; // conversion from tot length in um to half in cm
Float_t sin30, cos30;
// SDD electronics+services main volumes
- Float_t I018dits[3], I024dits[3], I047dits[3], I048dits[3];
+ Float_t iI018dits[3], iI024dits[3], iI047dits[3], iI048dits[3];
// SDD detector ladder
- Float_t I302dits[3], I402dits[3], I004dits[3], I005dits[3];
- Float_t Y_SDD_sep = 0.20;
+ Float_t iI302dits[3], iI402dits[3], iI004dits[3], iI005dits[3];
+ Float_t ySDDsep = 0.20;
Float_t ySDD;
Int_t iSDD;
- Float_t Z_SDD_lay3[6] = { 18.55, 10.95, 3.70, -3.70,-11.20,-18.35};
- Float_t Z_SDD_lay4[8] = { 25.75, 18.60, 11.00, 3.70, -3.70,-11.20,
+ Float_t zSDDlay3[6] = { 18.55, 10.95, 3.70, -3.70,-11.20,-18.35};
+ Float_t zSDDlay4[8] = { 25.75, 18.60, 11.00, 3.70, -3.70,-11.20,
-18.45,-26.05};
// ladder foot and end-ladder (frame and cooling)
- Float_t I028dits[3], I420dits[3], I421dits[3], I422dits[6], I423dits[3];
- Float_t I424dits[3], xI424, yI424;
- Float_t I425dits[3];
+ Float_t iI028dits[3], iI420dits[3], iI421dits[3], iI422dits[6], iI423dits[3];
+ Float_t iI424dits[3], xI424, yI424;
+ Float_t iI425dits[3];
Int_t indI425;
- Float_t I029dits[4], I030dits[4], I031dits[3], I032dits[3];
+ Float_t iI029dits[4], iI030dits[4], iI031dits[3], iI032dits[3];
// SDD ladder frame and cooling
- Float_t SDD_CoolPipe[3] = {1.7000, -0.5500, 0.0000};
- Float_t I035dits[3], I037dits[3], I038dits[3];
- Float_t I039dits[3], xI039, yI039;
- Float_t I041dits[5];
+ Float_t iSDDCoolPipe[3] = {1.7000, -0.5500, 0.0000};
+ Float_t iI035dits[3], iI037dits[3], iI038dits[3];
+ Float_t iI039dits[3], xI039, yI039;
+ Float_t iI041dits[5];
// SDD hybrid, chips and capacitors
- Float_t I050dits[3], xI050, yI050;
- Float_t I052dits[3], xI052, yI052;
- Float_t I042dits[3], xI042, yI042;
+ Float_t iI050dits[3], xI050, yI050;
+ Float_t iI052dits[3], xI052, yI052;
+ Float_t iI042dits[3], xI042, yI042;
Float_t xI042space = 0.17;
- Float_t I043dits[3], xI043, yI043;
+ Float_t iI043dits[3], xI043, yI043;
Float_t xI043space = 0.17;
Float_t zchip, zChipSpace;
- Float_t I051dits[3], xI051, yI051, zI051, yI051space, xcap;
+ Float_t iI051dits[3], xI051, yI051, zI051, yI051space, xcap;
Int_t ichip, icap;
// SDD microcables
- Float_t I044dits[4], xI044, yI044, volI044;
+ Float_t iI044dits[4], xI044, yI044, volI044;
Float_t xHV, yHV, zHV, xLV, yLV, zLV;
- Char_t HVname[5], LVname[5];
+ Char_t nameHV[5], nameLV[5];
// Define media off-set
AliMatrix(idrotm[218],90.0,337.003998,90.0,67.003998,0.0,0.0);
AliMatrix(idrotm[219],90.0,247.000305,90.0,337.000305,0.0,0.0);
AliMatrix(idrotm[220],90.0,305.633514,90.0,35.633499,0.0,0.0);
+
AliMatrix(idrotm[221],90.0,58.000198,90.0,148.000198,0.0,0.0);
AliMatrix(idrotm[222],90.0,327.997101,90.0,57.997101,0.0,0.0);
AliMatrix(idrotm[223],90.0,237.994202,90.0,327.994202,0.0,0.0);
// Services
AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.);
+ // New reference frame: z---> -z; x ---> -x; y ---> y
+ AliMatrix(idrotm[199], 90.,180., 90.,90., 180.,0.);
+
// CONVERT INTO CM (RL(SI)=9.36 CM)
for (i = 0; i < 6; ++i) {
drl[i] = drl[i] / 100. * 9.36;
dgh[8] = 85.;
dgh[9] = -ztpc;
dgh[10] = 46;
- dgh[11] = rlim+6;
+ dgh[11] = rlim+7.5;
dgh[12] = -97.5;
dgh[13] = 46;
- dgh[14] = rlim+6;
+ dgh[14] = rlim+7.5;
dgh[15] = -zmax;
dgh[16] = 46;
- dgh[17] = rlim+6;
+ dgh[17] = rlim+7.5;
dgh[18] = -48;
dgh[19] = 6;
- dgh[20] = rlim+6;
+ dgh[20] = rlim+7.5;
dgh[21] = -28.6;
dgh[22] = 6;
- dgh[23] = rlim+6;
+ dgh[23] = rlim+7.5;
dgh[24] = -27.6;
dgh[25] = 3.295;
- dgh[26] = rlim+6;
+ dgh[26] = rlim+7.5;
dgh[27] = 27.6;
dgh[28] = 3.295;
- dgh[29] = rlim+6;
+ dgh[29] = rlim+7.5;
dgh[30] = 28.6;
dgh[31] = 6;
- dgh[32] = rlim+6;
+ dgh[32] = rlim+7.5;
dgh[33] = 48;
dgh[34] = 6;
- dgh[35] = rlim+6;
+ dgh[35] = rlim+7.5;
dgh[36] = zmax;
dgh[37] = 46;
- dgh[38] = rlim+6;
+ dgh[38] = rlim+7.5;
dgh[39] = 97.5;
dgh[40] = 46;
- dgh[41] = rlim+6;
+ dgh[41] = rlim+7.5;
dgh[42] = ztpc;
dgh[43] = 62;
dgh[44] = 62+4.;
// --- Place the ghost volume in its mother volume (ALIC) and make it
// invisible
- gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY");
+ // gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY");
+ gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., idrotm[199], "MANY");
//gMC->Gsatt("ITSV", "SEEN", 0);
// --- Define ghost volume containing the six layers and fill it with air
dits[4] = 75.261;
gMC->Gsvolu("I137", "TUBS", idtmed[253], dits, 5);
+
dits[0] = 1.3401;
dits[1] = 0.01;
dits[2] = 24;
gMC->Gsvolu("I103", "BOX ", idtmed[254], di103, 3); // contains det
// and chip layer 1
dits[0] = 0.793;
- dits[1] = 0.475; //0.685; 0.015
+ dits[1] = ddet1+dchip1+dbus+0.0025;
dits[2] = 2.5;
gMC->Gsvolu("I105", "BOX ", idtmed[290], dits, 3);// end-ladder electr.
dits[4] = 180;
gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set water
- // as cooling
- // fluid
- } else {
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[212], dits, 5); // set freon
- // as cooling
- // fluid
- } // end if fluid
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set freon
+ // as cooling
+ // fluid
dits[0] = 0.063;
dits[1] = 0.035;
dits[2] = 24;
di1d1[2] = 3.536;
gMC->Gsvolu("I1D1", "BOX ", idtmed[250], di1d1, 3);// contains detector
// layer 2
- if (fluid == 1) {
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set water as
- // cooling fuid
- } else {
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[212], dits, 3); // set freon
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set freon
// as cooling
// fluid
- }// end if fluid
dits1[0] = 0.64;
dits1[1] = ddet1;
dits[2] = 0.55;
gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
- // was I177 in old geom.
- } else {
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
- // was I177 in old geom.
- }
+
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); // set freon as cooling fluid
+ // was I177 in old geom.
+
dits[0] = 0.07;
dits[1] = 0.125;
dits[2] = 0.3;
gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
- // was I174 in old geom.
- } else {
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
- // was I174 in old geom.
- }
+
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); // set freon as cooling fluid
+ // was I174 in old geom.
+
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
- // was I172 in old geom.
- } else {
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
- // was I172 in old geom.
- }
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); // set freon as cooling fluid
+ // was I172 in old geom.
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid
- // was I170 in old geom.
- } else {
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid
- // was I170 in old geom.
- }
+
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); // set freon as cooling fluid
+ // was I170 in old geom.
+
+
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // set freon as cooling fluid
+ // was I168 in old geom.
- if (fluid == 1) {
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); // set water as cooling fluid
- // was I168 in old geom.
- } else {
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[212], dits, 5); // set freon as cooling fluid
- // was I168 in old geom.
- }
- }
+ }
// --- Define SPD (option 'b') volumes ----------------------------
gMC->Gsvolu("I124", "TUBS", idtmed[253], dits, 5);
dits[0] = 0.793;
- dits[1] = 0.475 ; //0.685; 0.015
+ dits[1] = ddet1+dchip1+dbus+0.0025;
dits[2] = 2.5;
gMC->Gsvolu("I105", "BOX ", idtmed[290], dits, 3);
dits[4] = 180;
gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set water as cooling fluid
- } else {
- dits[0] = 0;
- dits[1] = 0.025;
- dits[2] = 24;
- dits[3] = 0;
- dits[4] = 180;
- gMC->Gsvolu("I115", "TUBS", idtmed[212], dits, 5); // set freon as cooling fluid
- }
+ dits[0] = 0;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ dits[3] = 0;
+ dits[4] = 180;
+ gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set freon as cooling fluid
+
dits[0] = 0.063;
dits[1] = 0.035;
gMC->Gsvolu("I1D1", "BOX ", idtmed[250], di1d1, 3); // contains detector
// layer 2
- if (fluid == 1) {
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set water as cooling fluid
- } else {
- dits[0] = 0.063;
- dits[1] = 0.025;
- dits[2] = 24;
- gMC->Gsvolu("I117", "BOX ", idtmed[212], dits, 3); // set freon as cooling fluid
- }
+
+ dits[0] = 0.063;
+ dits[1] = 0.025;
+ dits[2] = 24;
+ gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set freon as cooling fluid
+
dits1[0] = 0.64;
dits1[1] = ddet1;
dits[2] = 0.55;
gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom.
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
- // was I177 in old geom.
- } else {
- dits[0] = 0;
- dits[1] = 0.3;
- dits[2] = 1.5;
- gMC->Gsvolu("I677", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
- // was I177 in old geom.
- }
-
+ dits[0] = 0;
+ dits[1] = 0.3;
+ dits[2] = 1.5;
+ gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
+ // was I177 in old geom.
+
dits[0] = 0.07;
dits[1] = 0.125;
dits[2] = 0.3;
gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom.
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
- // was I174 in old geom.
- } else {
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 0.8;
- gMC->Gsvolu("I674", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
- // was I174 in old geom.
- }
+
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
+ // was I174 in old geom.
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
- // was I172 in old geom.
- } else {
- dits[0] = 0;
- dits[1] = 0.1;
- dits[2] = 3;
- gMC->Gsvolu("I672", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
- // was I172 in old geom.
- }
- if (fluid == 1) {
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); //set water as cooling fluid
- // was I170 in old geom.
- } else {
- dits[0] = 0;
- dits[1] = 0.0746;
- dits[2] = 0.8;
- gMC->Gsvolu("I670", "TUBE", idtmed[212], dits, 3); //set freon as cooling fluid
- // was I170 in old geom.
- }
+
+ dits[0] = 0;
+ dits[1] = 0.1;
+ dits[2] = 3;
+ gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
+ // was I172 in old geom.
+
+
+ dits[0] = 0;
+ dits[1] = 0.0746;
+ dits[2] = 0.8;
+ gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
+ // was I170 in old geom.
+
+ dits[0] = 3.7;
+ dits[1] = 5.4;
+ dits[2] = 0.35;
+ dits[3] = 2;
+ dits[4] = 36;
+ gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); //set freon as cooling fluid
+ // was I168 in old geom.
- if (fluid == 1) {
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); //set water as cooling fluid
- // was I168 in old geom.
- } else {
- dits[0] = 3.7;
- dits[1] = 5.4;
- dits[2] = 0.35;
- dits[3] = 2;
- dits[4] = 36;
- gMC->Gsvolu("I668", "TUBS", idtmed[212], dits, 5); //set freon as cooling fluid
- // was I168 in old geom.
- }
}
cos30 = cos(30.*3.14159/180.);
sin30 = sin(30.*3.14159/180.);
-
+ Double_t maxRadius = 28.5;
dits[0] = 0;
dits[1] = 360;
dits[2] = 6;
dits[3] = -34.6;
dits[4] = 23.49;
- dits[5] = 28;
- dits[6] = -23.65;
+ dits[5] = maxRadius;
+ dits[6] = -27.35;
dits[7] = 23.49;
- dits[8] = 28;
- dits[9] = -23.65;
+ dits[8] = maxRadius;
+ dits[9] = -27.35;
dits[10] = 14.59;
- dits[11] = 28;
- dits[12] = 23.65;
+ dits[11] = maxRadius;
+ dits[12] = 27.35;
dits[13] = 14.59;
- dits[14] = 28;
- dits[15] = 23.65;
+ dits[14] = maxRadius;
+ dits[15] = 27.35;
dits[16] = 23.49;
- dits[17] = 28;
+ dits[17] = maxRadius;
dits[18] = 34.6;
dits[19] = 23.49;
- dits[20] = 28;
+ dits[20] = maxRadius;
gMC->Gsvolu("IT34", "PCON", idtmed[209], dits, 21);
// block of the SDD electronics and related ladder frame
- I018dits[0] = 3.2;
- I018dits[1] = 2;
- I018dits[2] = 3.65;
- gMC->Gsvolu("I018", "BOX ", idtmed[209], I018dits, 3);
+ iI018dits[0] = 3.2;
+ iI018dits[1] = 2;
+ iI018dits[2] = 3.65;
+ gMC->Gsvolu("I018", "BOX ", idtmed[209], iI018dits, 3);
// block of the SDD end ladder
- I024dits[0] = 3.2;
- I024dits[1] = 2;
- I024dits[2] = 2.725;
- gMC->Gsvolu("I024", "BOX ", idtmed[209], I024dits, 3);
+ iI024dits[0] = 3.2;
+ iI024dits[1] = 2;
+ iI024dits[2] = 2.725;
+ gMC->Gsvolu("I024", "BOX ", idtmed[209], iI024dits, 3);
// ladder frame of layer 3 - F.T. March,7-2001
- I047dits[0] = I018dits[0];
- I047dits[1] = I018dits[1];
- I047dits[2] = 6*I018dits[2] + 2*I024dits[2];
- gMC->Gsvolu("I047", "BOX ", idtmed[209], I047dits, 3);
+ iI047dits[0] = iI018dits[0];
+ iI047dits[1] = iI018dits[1];
+ iI047dits[2] = 6*iI018dits[2] + 2*iI024dits[2];
+ gMC->Gsvolu("I047", "BOX ", idtmed[209], iI047dits, 3);
// ladder frame of layer 4 - F.T. March,7-2001
- I048dits[0] = I018dits[0];
- I048dits[1] = I018dits[1];
- I048dits[2] = 8*I018dits[2] + 2*I024dits[2];
- gMC->Gsvolu("I048", "BOX ", idtmed[209], I048dits, 3);
+ iI048dits[0] = iI018dits[0];
+ iI048dits[1] = iI018dits[1];
+ iI048dits[2] = 8*iI018dits[2] + 2*iI024dits[2];
+ gMC->Gsvolu("I048", "BOX ", idtmed[209], iI048dits, 3);
// global SDD volume (sensitive + insensitive)
- I302dits[0] = 3.6250;
- I302dits[1] = 0.0150;
- I302dits[2] = 4.3794;
- gMC->Gsvolu("I302", "BOX ", idtmed[278], I302dits, 3);
+ iI302dits[0] = 3.6250;
+ iI302dits[1] = 0.0150;
+ iI302dits[2] = 4.3794;
+ gMC->Gsvolu("I302", "BOX ", idtmed[278], iI302dits, 3);
// Like for I302 - F.T. March,7-2001
- I402dits[0] = 3.6250;
- I402dits[1] = 0.0150;
- I402dits[2] = 4.3794;
- gMC->Gsvolu("I402", "BOX ", idtmed[278], I402dits, 3);
+ iI402dits[0] = 3.6250;
+ iI402dits[1] = 0.0150;
+ iI402dits[2] = 4.3794;
+ gMC->Gsvolu("I402", "BOX ", idtmed[278], iI402dits, 3);
// SDD ladder of layer 3 - F.T. March,7-2001
- I004dits[0] = I302dits[0]+0.005;
- I004dits[1] = 2*I302dits[1]+Y_SDD_sep/2.;
- I004dits[2] = TMath::Abs(Z_SDD_lay3[0]);
- if (I004dits[2] < TMath::Abs(Z_SDD_lay3[5])) {
- I004dits[2] = TMath::Abs(Z_SDD_lay3[5]);
+ iI004dits[0] = iI302dits[0]+0.005;
+ iI004dits[1] = 2*iI302dits[1]+ySDDsep/2.;
+ iI004dits[2] = TMath::Abs(zSDDlay3[0]);
+ if (iI004dits[2] < TMath::Abs(zSDDlay3[5])) {
+ iI004dits[2] = TMath::Abs(zSDDlay3[5]);
}
- I004dits[2] = I004dits[2] + I302dits[2];
- gMC->Gsvolu("I004", "BOX ", idtmed[209], I004dits, 3);
+ iI004dits[2] = iI004dits[2] + iI302dits[2];
+ gMC->Gsvolu("I004", "BOX ", idtmed[209], iI004dits, 3);
// SDD ladder of layer 4 - F.T. March,7-2001
- I005dits[0] = I402dits[0]+0.005;
- I005dits[1] = 2*I402dits[1]+Y_SDD_sep/2.;
- I005dits[2] = TMath::Abs(Z_SDD_lay4[0]);
- if (I005dits[2] < TMath::Abs(Z_SDD_lay4[7])) {
- I005dits[2] = TMath::Abs(Z_SDD_lay4[7]);
+ iI005dits[0] = iI402dits[0]+0.005;
+ iI005dits[1] = 2*iI402dits[1]+ySDDsep/2.;
+ iI005dits[2] = TMath::Abs(zSDDlay4[0]);
+ if (iI005dits[2] < TMath::Abs(zSDDlay4[7])) {
+ iI005dits[2] = TMath::Abs(zSDDlay4[7]);
}
- I005dits[2] = I005dits[2] + I402dits[2];
- gMC->Gsvolu("I005", "BOX ", idtmed[209], I005dits, 3);
+ iI005dits[2] = iI005dits[2] + iI402dits[2];
+ gMC->Gsvolu("I005", "BOX ", idtmed[209], iI005dits, 3);
// -- block of the SDD ladder foot and end ladder
// ladder foot mother volume
- I028dits[0] = 3.0000;
- I028dits[1] = 0.4000;
- I028dits[2] = 0.9000;
- gMC->Gsvolu("I028", "BOX ", idtmed[224], I028dits, 3);
+ iI028dits[0] = 3.0000;
+ iI028dits[1] = 0.4000;
+ iI028dits[2] = 0.9000;
+ gMC->Gsvolu("I028", "BOX ", idtmed[224], iI028dits, 3);
// positioning-box #1 at SDD end-ladder - F.T. March,7-2001
- I420dits[0] = 0.4500;
- I420dits[1] = 0.4000;
- I420dits[2] = 0.4500;
- gMC->Gsvolu("I420", "BOX ", idtmed[264], I420dits, 3);
+ iI420dits[0] = 0.4500;
+ iI420dits[1] = 0.4000;
+ iI420dits[2] = 0.4500;
+ gMC->Gsvolu("I420", "BOX ", idtmed[264], iI420dits, 3);
// positioning-box #2 at SDD end-ladder - F.T. March,7-2001
- I421dits[0] = 0.;
- I421dits[1] = 0.25;
- I421dits[2] = I420dits[1];
- gMC->Gsvolu("I421", "TUBE", idtmed[209], I421dits, 3);
+ iI421dits[0] = 0.;
+ iI421dits[1] = 0.25;
+ iI421dits[2] = iI420dits[1];
+ gMC->Gsvolu("I421", "TUBE", idtmed[209], iI421dits, 3);
// reference ruby-sphere at SDD end-ladder - F.T. March,7-2001
- I422dits[0] = 0.0000;
- I422dits[1] = 0.2000;
- I422dits[2] = 0.0000;
- I422dits[3] = 180.00;
- I422dits[4] = 0.0000;
- I422dits[5] = 360.00;
- gMC->Gsvolu("I422", "SPHE", idtmed[277], I422dits, 6);
+ iI422dits[0] = 0.0000;
+ iI422dits[1] = 0.2000;
+ iI422dits[2] = 0.0000;
+ iI422dits[3] = 180.00;
+ iI422dits[4] = 0.0000;
+ iI422dits[5] = 360.00;
+ gMC->Gsvolu("I422", "SPHE", idtmed[277], iI422dits, 6);
// support for ruby-sphere (I422) - F.T. March,7-2001
- I423dits[0] = 0.0000;
- I423dits[1] = 0.1000;
- I423dits[2] = (I420dits[1]-I422dits[1])/2.;
- gMC->Gsvolu("I423", "TUBE", idtmed[264], I423dits, 3);
+ iI423dits[0] = 0.0000;
+ iI423dits[1] = 0.1000;
+ iI423dits[2] = (iI420dits[1]-iI422dits[1])/2.;
+ gMC->Gsvolu("I423", "TUBE", idtmed[264], iI423dits, 3);
// passage for HV microcables - F.T. March,7-2001
- I424dits[0] = 1.5000;
- I424dits[1] = 0.1500;
- I424dits[2] = I421dits[2];
- gMC->Gsvolu("I424", "BOX ", idtmed[209], I424dits, 3);
+ iI424dits[0] = 1.5000;
+ iI424dits[1] = 0.1500;
+ iI424dits[2] = iI421dits[2];
+ gMC->Gsvolu("I424", "BOX ", idtmed[209], iI424dits, 3);
// HV microcables segment at the end ladder - F.T. March,7-2001
- I425dits[0] = 1.350000;
- I425dits[1] = 0.015250;
- I425dits[2] = I024dits[2];
- gMC->Gsvolu("I425", "BOX ", idtmed[279], I425dits, 3);
+ iI425dits[0] = 1.350000;
+ iI425dits[1] = 0.015250;
+ iI425dits[2] = iI024dits[2];
+ gMC->Gsvolu("I425", "BOX ", idtmed[279], iI425dits, 3);
// lower edge of SDD ladder frame at end-ladder - part 1
dits[0] = 0.2;
dits[1] = 0.1815;
- dits[2] = I024dits[2];
+ dits[2] = iI024dits[2];
dits[3] = 0.015;
gMC->Gsvolu("I025", "TRD1", idtmed[208], dits, 4);
// lower edge of SDD ladder frame at end-ladder - part 2
dits[0] = 0.183;
dits[1] = 0.165;
- dits[2] = I024dits[2];
+ dits[2] = iI024dits[2];
dits[3] = 0.015;
gMC->Gsvolu("I026", "TRD1", idtmed[208], dits, 4);
// new: for the 1st top rod of the structure
// at the end-ladder - F.T. March,7-2001
- I029dits[0] = 0.2;
- I029dits[1] = 0.1815;
- I029dits[2] = 1.0100;
- I029dits[3] = 0.015;
- gMC->Gsvolu("I029", "TRD1", idtmed[208], I029dits, 4);
+ iI029dits[0] = 0.2;
+ iI029dits[1] = 0.1815;
+ iI029dits[2] = 1.0100;
+ iI029dits[3] = 0.015;
+ gMC->Gsvolu("I029", "TRD1", idtmed[208], iI029dits, 4);
// new: for the 2nd top rod of the structure
// at the end-ladder - F.T. March,7-2001
- I030dits[0] = 0.1830;
- I030dits[1] = 0.1650;
- I030dits[2] = 1.0100;
- I030dits[3] = 0.0150;
- gMC->Gsvolu("I030", "TRD1", idtmed[208], I030dits, 4);
+ iI030dits[0] = 0.1830;
+ iI030dits[1] = 0.1650;
+ iI030dits[2] = 1.0100;
+ iI030dits[3] = 0.0150;
+ gMC->Gsvolu("I030", "TRD1", idtmed[208], iI030dits, 4);
// inox cooling tubes for the end ladder - F.T. March,7-2001
- I031dits[0] = 0.093;
- I031dits[1] = 0.1;
- I031dits[2] = I024dits[2];
- gMC->Gsvolu("I031", "TUBE", idtmed[264], I031dits, 3);
+ iI031dits[0] = 0.093;
+ iI031dits[1] = 0.1;
+ iI031dits[2] = iI024dits[2];
+ gMC->Gsvolu("I031", "TUBE", idtmed[264], iI031dits, 3);
if (fluid == 1) {
// cooling water for the end ladder - F.T. March,7-2001
- I032dits[0] = 0;
- I032dits[1] = I031dits[0];
- I032dits[2] = I024dits[2];
- gMC->Gsvolu("I032", "TUBE", idtmed[211], I032dits, 3);
+ iI032dits[0] = 0;
+ iI032dits[1] = iI031dits[0];
+ iI032dits[2] = iI024dits[2];
+ gMC->Gsvolu("I032", "TUBE", idtmed[211], iI032dits, 3);
} else {
// cooling freon for the end ladder - R.B. March,21-2001
- I032dits[0] = 0;
- I032dits[1] = I031dits[0];
- I032dits[2] = I024dits[2];
- gMC->Gsvolu("I032", "TUBE", idtmed[212], I032dits, 3);
+ iI032dits[0] = 0;
+ iI032dits[1] = iI031dits[0];
+ iI032dits[2] = iI024dits[2];
+ gMC->Gsvolu("I032", "TUBE", idtmed[212], iI032dits, 3);
}
// -- block of the SDD ladder frame holding the electronics
gMC->Gsvolu("I034", "TUBE", idtmed[277], dits, 3);
// holders of cooling tubes
- I035dits[0] = 0.1;
- I035dits[1] = 0.15;
- I035dits[2] = 0.2;
- gMC->Gsvolu("I035", "TUBE", idtmed[208], I035dits, 3);
+ iI035dits[0] = 0.1;
+ iI035dits[1] = 0.15;
+ iI035dits[2] = 0.2;
+ gMC->Gsvolu("I035", "TUBE", idtmed[208], iI035dits, 3);
// top holders of microcables
dits[0] = 0.2;
gMC->Gsvolu("I036", "BOX ", idtmed[208], dits, 3);
// inox cooling tubes - F.T. March,7-2001
- I037dits[0] = 0.093;
- I037dits[1] = 0.1;
- I037dits[2] = I018dits[2];
- gMC->Gsvolu("I037", "TUBE", idtmed[264], I037dits, 3);
+ iI037dits[0] = 0.093;
+ iI037dits[1] = 0.1;
+ iI037dits[2] = iI018dits[2];
+ gMC->Gsvolu("I037", "TUBE", idtmed[264], iI037dits, 3);
if (fluid == 1) {
// cooling water - F.T. March,7-2001
- I038dits[0] = 0;
- I038dits[1] = I037dits[0];
- I038dits[2] = I018dits[2];
- gMC->Gsvolu("I038", "TUBE", idtmed[211], I038dits, 3);
+ iI038dits[0] = 0;
+ iI038dits[1] = iI037dits[0];
+ iI038dits[2] = iI018dits[2];
+ gMC->Gsvolu("I038", "TUBE", idtmed[211], iI038dits, 3);
} else {
// cooling freon - R.B. March,21-2001
- I038dits[0] = 0;
- I038dits[1] = I037dits[0];
- I038dits[2] = I018dits[2];
- gMC->Gsvolu("I038", "TUBE", idtmed[212], I038dits, 3);
+ iI038dits[0] = 0;
+ iI038dits[1] = iI037dits[0];
+ iI038dits[2] = iI018dits[2];
+ gMC->Gsvolu("I038", "TUBE", idtmed[212], iI038dits, 3);
}
// -- block of the SDD electronics (heat bridge, chips, hybrid, anode microcable)
// SDD heat bridge - F.T. March,7-2001
- I039dits[0] = 1.1000;
- I039dits[1] = 0.0087;
- I039dits[2] = 3.2500;
- gMC->Gsvolu("I039", "BOX ", idtmed[268], I039dits, 3);
+ iI039dits[0] = 1.1000;
+ iI039dits[1] = 0.0087;
+ iI039dits[2] = 3.2500;
+ gMC->Gsvolu("I039", "BOX ", idtmed[268], iI039dits, 3);
// SDD clip part 1
dits[0] = 0.25;
dits[1] = 0.01;
- dits[2] = I039dits[2];
+ dits[2] = iI039dits[2];
gMC->Gsvolu("I040", "BOX ", idtmed[268], dits, 3);
// SDD clip part 2
- I041dits[0] = 0.1;
- I041dits[1] = 0.12;
- I041dits[2] = I039dits[2];
- I041dits[3] = 90;
- I041dits[4] = 320;
- gMC->Gsvolu("I041", "TUBS", idtmed[268], I041dits, 5);
+ iI041dits[0] = 0.1;
+ iI041dits[1] = 0.12;
+ iI041dits[2] = iI039dits[2];
+ iI041dits[3] = 90;
+ iI041dits[4] = 320;
+ gMC->Gsvolu("I041", "TUBS", idtmed[268], iI041dits, 5);
// SDD PASCAL - F.T. March,7-2001
- I042dits[0] = 0.5000;
- I042dits[1] = 0.0175;
- I042dits[2] = 0.5000;
- gMC->Gsvolu("I042", "BOX ", idtmed[206], I042dits, 3);
+ iI042dits[0] = 0.5000;
+ iI042dits[1] = 0.0175;
+ iI042dits[2] = 0.5000;
+ gMC->Gsvolu("I042", "BOX ", idtmed[206], iI042dits, 3);
// SDD AMBRA - F.T. March,7-2001
- I043dits[0] = 0.3500;
- I043dits[1] = 0.0175;
- I043dits[2] = 0.5000;
- gMC->Gsvolu("I043", "BOX ", idtmed[206], I043dits, 3);
+ iI043dits[0] = 0.3500;
+ iI043dits[1] = 0.0175;
+ iI043dits[2] = 0.5000;
+ gMC->Gsvolu("I043", "BOX ", idtmed[206], iI043dits, 3);
// SDD capacitors - F.T. March,7-2001
- I051dits[0] = 0.1400;
- I051dits[1] = 0.0350;
- I051dits[2] = 0.0625;
- gMC->Gsvolu("I051", "BOX ", idtmed[276], I051dits, 3);
+ iI051dits[0] = 0.1400;
+ iI051dits[1] = 0.0350;
+ iI051dits[2] = 0.0625;
+ gMC->Gsvolu("I051", "BOX ", idtmed[276], iI051dits, 3);
// SDD hybrid circuit - F.T. March,7-2001
- I052dits[0] = 1.725000;
- I052dits[1] = 0.003743;
- I052dits[2] = I039dits[2];
- gMC->Gsvolu("I052", "BOX ", idtmed[281], I052dits, 3);
+ iI052dits[0] = 1.725000;
+ iI052dits[1] = 0.003743;
+ iI052dits[2] = iI039dits[2];
+ gMC->Gsvolu("I052", "BOX ", idtmed[281], iI052dits, 3);
// SDD anode microcable : changed - F.T. March,7-2001
- I044dits[0] = I018dits[2];
- I044dits[1] = I039dits[2];
- I044dits[2] = 0.00084;
- I044dits[3] = (15.189149/(I044dits[0]+I044dits[1]))/2;
- gMC->Gsvolu("I044", "TRD1", idtmed[282], I044dits, 4);
- volI044 = ((2*I044dits[0] + 2*I044dits[1]) * 2*I044dits[2])/2 * 2*I044dits[3];
+ iI044dits[0] = iI018dits[2];
+ iI044dits[1] = iI039dits[2];
+ iI044dits[2] = 0.00084;
+ iI044dits[3] = (15.189149/(iI044dits[0]+iI044dits[1]))/2;
+ gMC->Gsvolu("I044", "TRD1", idtmed[282], iI044dits, 4);
+ volI044 = ((2*iI044dits[0] + 2*iI044dits[1]) * 2*iI044dits[2])/2 * 2*iI044dits[3];
// SDD electronics box - F.T. March,7-2001
- I050dits[1] = I039dits[1]+I052dits[1]+I051dits[1]+I044dits[2];
- I050dits[0] = I018dits[1]/cos(30.*3.14159/180.)-I050dits[1]*sin(30.*3.14159/180.);
- I050dits[2] = I018dits[2];
- gMC->Gsvolu("I050", "BOX ", idtmed[209], I050dits, 3);
+ iI050dits[1] = iI039dits[1]+iI052dits[1]+iI051dits[1]+iI044dits[2];
+ iI050dits[0] = iI018dits[1]/cos(30.*3.14159/180.)-iI050dits[1]*sin(30.*3.14159/180.);
+ iI050dits[2] = iI018dits[2];
+ gMC->Gsvolu("I050", "BOX ", idtmed[209], iI050dits, 3);
// SDD sensitive volume
dits[0] = 3.50850;
dits[18] = 57.45;
dits[19] = 43.6;
dits[20] = 48;
- gMC->Gsvolu("IT56", "PCON", idtmed[220], dits, 21);
+ //gMC->Gsvolu("IT56", "PCON", idtmed[220], dits, 21); // SSD air
+ gMC->Gsvolu("IT56", "PCON", idtmed[204], dits, 21); // air
dits[0] = 3.4;
dits[1] = 1.955;
// -- position SDD detectors of ladder 3 / layer 3
gMC->Gspos("ITS3", 1,"I302", 0.0, 0.0, 0.0, 0, "ONLY");
- ySDD = Y_SDD_sep/2.+I302dits[1];
+ ySDD = ySDDsep/2.+iI302dits[1];
for (iSDD=0; iSDD<6; iSDD++) {
- gMC->Gspos("I302", iSDD+1, "I004", 0.0, ySDD, Z_SDD_lay3[iSDD], 0, "ONLY");
+ gMC->Gspos("I302", iSDD+1, "I004", 0.0, ySDD, zSDDlay3[iSDD], 0, "ONLY");
ySDD = -ySDD;
}
// -- position SDD detectors of ladder 4 / layer 4
gMC->Gspos("ITS4", 1,"I402", 0.0, 0.000, 0.0, 0,"ONLY");
- ySDD = -(Y_SDD_sep/2.+I402dits[1]);
+ ySDD = -(ySDDsep/2.+iI402dits[1]);
for (iSDD=0; iSDD<8; iSDD++) {
- gMC->Gspos("I402", iSDD+1, "I005", 0.0, ySDD, Z_SDD_lay4[iSDD], 0, "ONLY");
+ gMC->Gspos("I402", iSDD+1, "I005", 0.0, ySDD, zSDDlay4[iSDD], 0, "ONLY");
ySDD = -ySDD;
}
gMC->Gspos("I034", 3,"I018", -1.6, -1.775, 1.35, idrotm[348], "ONLY");
gMC->Gspos("I034", 4,"I018", 1.6, -1.775, -2.65, idrotm[312], "ONLY");
- gMC->Gspos("I035", 1,"I018", 1.7, -0.55, I018dits[2]-I035dits[2], 0, "MANY");
- gMC->Gspos("I035", 2,"I018", -1.7, -0.55, I018dits[2]-I035dits[2], 0, "MANY");
+ gMC->Gspos("I035", 1,"I018", 1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "MANY");
+ gMC->Gspos("I035", 2,"I018", -1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "MANY");
gMC->Gspos("I036", 1,"I018", 0.3087, 1.7191, 3.56, idrotm[346], "ONLY");
gMC->Gspos("I036", 2,"I018", 0.3087, 1.7191,-0.11, idrotm[346], "ONLY");
gMC->Gspos("I036", 3,"I018", -0.3087, 1.7191,-0.11, idrotm[347], "ONLY");
gMC->Gspos("I036", 4,"I018", -0.3087, 1.7191, 3.56, idrotm[347], "ONLY");
- gMC->Gspos("I037", 1,"I018", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 , "ONLY");
- gMC->Gspos("I037", 2,"I018", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 , "ONLY");
+ gMC->Gspos("I037", 1,"I018", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
+ gMC->Gspos("I037", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
- gMC->Gspos("I038", 1,"I018", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 , "ONLY");
- gMC->Gspos("I038", 2,"I018", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 , "ONLY");
+ gMC->Gspos("I038", 1,"I018", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
+ gMC->Gspos("I038", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
gMC->Gspos("I040", 1,"I018", 1.9204, -0.7118, 0.0, idrotm[346],"ONLY");
gMC->Gspos("I040", 2,"I018", -1.9204, -0.7118, 0.0, idrotm[347],"ONLY");
- gMC->Gspos("I041", 1,"I018", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], idrotm[346], "ONLY");
- gMC->Gspos("I041", 2,"I018", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], idrotm[347], "ONLY");
+ gMC->Gspos("I041", 1,"I018", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], idrotm[346], "ONLY");
+ gMC->Gspos("I041", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], idrotm[347], "ONLY");
// -- build block of the SDD electronics (heat bridge, chips, hybrid, anode microcable)
- xI050 = SDD_CoolPipe[0]+SDD_CoolPipe[1]*sin30+I050dits[1]/cos30+I041dits[1];
+ xI050 = iSDDCoolPipe[0]+iSDDCoolPipe[1]*sin30+iI050dits[1]/cos30+iI041dits[1];
yI050 = 0;
- xI039 = -SDD_CoolPipe[1]/cos30;
- yI039 = -I050dits[1]+I039dits[1];
+ xI039 = -iSDDCoolPipe[1]/cos30;
+ yI039 = -iI050dits[1]+iI039dits[1];
gMC->Gspos("I039", 1,"I050", xI039, yI039, 0.0, 0, "ONLY");
- xI042 = xI039+I039dits[0]-xI042space-I042dits[0];
- yI042 = yI039+I039dits[1]+I042dits[1];
- xI043 = xI039-I039dits[0]+xI043space+I043dits[0];
- yI043 = yI039+I039dits[1]+I043dits[1];
- zChipSpace = I042dits[2];
- if (zChipSpace < I043dits[2]) {
- zChipSpace = I043dits[2];
+ xI042 = xI039+iI039dits[0]-xI042space-iI042dits[0];
+ yI042 = yI039+iI039dits[1]+iI042dits[1];
+ xI043 = xI039-iI039dits[0]+xI043space+iI043dits[0];
+ yI043 = yI039+iI039dits[1]+iI043dits[1];
+ zChipSpace = iI042dits[2];
+ if (zChipSpace < iI043dits[2]) {
+ zChipSpace = iI043dits[2];
}
zChipSpace = zChipSpace * 2;
- yI051space = (2*I039dits[2] - 4*zChipSpace)/5;
- zchip = -I039dits[2] + yI051space + zChipSpace/2.;
+ yI051space = (2*iI039dits[2] - 4*zChipSpace)/5;
+ zchip = -iI039dits[2] + yI051space + zChipSpace/2.;
for (ichip=0; ichip<4; ichip++) {
gMC->Gspos("I042", ichip+1, "I050", xI042, yI042, zchip, 0, "ONLY");
gMC->Gspos("I043", ichip+1, "I050", xI043, yI043, zchip, 0, "ONLY");
zchip += zChipSpace + yI051space;
}
- xcap = 2*I039dits[0]/5.;
- yI051 = yI039+I039dits[1]+I051dits[1];
- zI051 = -I039dits[2] + yI051space/3.;
+ xcap = 2*iI039dits[0]/5.;
+ yI051 = yI039+iI039dits[1]+iI051dits[1];
+ zI051 = -iI039dits[2] + yI051space/3.;
icap = 1;
for (ichip=0; ichip<5; ichip++) {
- xI051 = xI039-I039dits[0]+xcap;
+ xI051 = xI039-iI039dits[0]+xcap;
gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
zI051 += yI051space/3.;
gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
}
zI051 += zChipSpace + yI051space;
}
- xI052 = -I050dits[0]+I052dits[0];
- yI052 = yI051+I051dits[1]+I052dits[1];
+ xI052 = -iI050dits[0]+iI052dits[0];
+ yI052 = yI051+iI051dits[1]+iI052dits[1];
gMC->Gspos("I052", 1,"I050", xI052, yI052, 0.0, 0, "ONLY");
- xI044 = I050dits[0]-I044dits[3];
- yI044 = yI052+I052dits[1]+I044dits[2];
+ xI044 = iI050dits[0]-iI044dits[3];
+ yI044 = yI052+iI052dits[1]+iI044dits[2];
gMC->Gspos("I044", 1,"I050", xI044, yI044, 0.0, idrotm[301], "ONLY");
gMC->Gspos("I050", 1,"I018", xI050, yI050, 0.0, idrotm[346],"ONLY");
gMC->Gspos("I050", 2,"I018", -xI050, yI050, 0.0, idrotm[347],"ONLY");
gMC->Gspos("I026", 1,"I024", -1.9782, -1.5689, 0.0, idrotm[342], "ONLY");
gMC->Gspos("I026", 2,"I024", 1.8824, -1.7349, 0.0, idrotm[344], "ONLY");
- gMC->Gspos("I029", 1,"I024", -0.087, 1.7067, I029dits[2]-I024dits[2], idrotm[342], "ONLY");
+ gMC->Gspos("I029", 1,"I024", -0.087, 1.7067, iI029dits[2]-iI024dits[2], idrotm[342], "ONLY");
- gMC->Gspos("I030", 1,"I024", 0.0958, 1.6914, I030dits[2]-I024dits[2], idrotm[343], "ONLY");
+ gMC->Gspos("I030", 1,"I024", 0.0958, 1.6914, iI030dits[2]-iI024dits[2], idrotm[343], "ONLY");
- gMC->Gspos("I031", 1,"I024", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 ,"ONLY");
- gMC->Gspos("I031", 2,"I024", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 ,"ONLY");
+ gMC->Gspos("I031", 1,"I024", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
+ gMC->Gspos("I031", 2,"I024", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
- gMC->Gspos("I032", 1,"I024", SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 ,"ONLY");
- gMC->Gspos("I032", 2,"I024", -SDD_CoolPipe[0], SDD_CoolPipe[1], SDD_CoolPipe[2], 0 ,"ONLY");
+ gMC->Gspos("I032", 1,"I024", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
+ gMC->Gspos("I032", 2,"I024", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
- xI424 = I028dits[0]/3.;
- yI424 = -I028dits[1]+I424dits[1];
+ xI424 = iI028dits[0]/3.;
+ yI424 = -iI028dits[1]+iI424dits[1];
gMC->Gspos("I422", 1,"I421", 0.0, 0.0, 0.0, 0, "ONLY");
- gMC->Gspos("I423", 1,"I421", 0.0, 0.0, I421dits[2]-I423dits[2], 0, "ONLY");
+ gMC->Gspos("I423", 1,"I421", 0.0, 0.0, iI421dits[2]-iI423dits[2], 0, "ONLY");
gMC->Gspos("I421", 1,"I420", 0.0, 0.0, 0.0, idrotm[312], "ONLY");
- gMC->Gspos("I420", 1,"I028", -I028dits[0]/3., I028dits[1]-I420dits[1], 0.0, 0, "ONLY");
+ gMC->Gspos("I420", 1,"I028", -iI028dits[0]/3., iI028dits[1]-iI420dits[1], 0.0, 0, "ONLY");
gMC->Gspos("I424", 1,"I028", xI424, yI424, 0.0, 0, "ONLY");
- gMC->Gspos("I028", 1,"I024", 0.0, I028dits[1]-I024dits[1], I024dits[2]-I028dits[2], 0, "MANY");
+ gMC->Gspos("I028", 1,"I024", 0.0, iI028dits[1]-iI024dits[1], iI024dits[2]-iI028dits[2], 0, "MANY");
// -- build the SDD ladder 3
gMC->Gspos("I018", 5,"I047", 0.0, 0.0, -10.95, 0, "ONLY");
gMC->Gspos("I018", 6,"I047", 0.0, 0.0, -18.25, 0, "ONLY");
gMC->Gspos("I024", 2,"I047", 0.0, 0.0, -24.625, idrotm[355], "ONLY");
- HVname[0] = 'I';
- HVname[1] = '3';
- HVname[2] = '1';
- HVname[4] = '\0';
+ nameHV[0] = 'I';
+ nameHV[1] = '3';
+ nameHV[2] = '1';
+ nameHV[4] = '\0';
for (iSDD=0; iSDD<3; iSDD++) {
- HVname[3] = (Char_t)(48+iSDD+5);
+ nameHV[3] = (Char_t)(48+iSDD+5);
dits[0] = 1.350000;
- dits[1] = I425dits[1];
- dits[2] = (I047dits[2] - 2*I024dits[2] - Z_SDD_lay3[iSDD])/2.;
- gMC->Gsvolu(HVname, "BOX ", idtmed[279], dits, 3);
+ dits[1] = iI425dits[1];
+ dits[2] = (iI047dits[2] - 2*iI024dits[2] - zSDDlay3[iSDD])/2.;
+ gMC->Gsvolu(nameHV, "BOX ", idtmed[279], dits, 3);
xHV = 0.0;
- yHV = -I047dits[1] + (2*iSDD+1)*dits[1];
- zHV = I047dits[2] - 2*I024dits[2] - dits[2];
- gMC->Gspos(HVname, 1,"I047", xHV, yHV, zHV, 0, "ONLY");
- gMC->Gspos(HVname, 2,"I047", xHV, yHV, -zHV, 0, "ONLY");
+ yHV = -iI047dits[1] + (2*iSDD+1)*dits[1];
+ zHV = iI047dits[2] - 2*iI024dits[2] - dits[2];
+ gMC->Gspos(nameHV, 1,"I047", xHV, yHV, zHV, 0, "ONLY");
+ gMC->Gspos(nameHV, 2,"I047", xHV, yHV, -zHV, 0, "ONLY");
gMC->Gspos("I425", indI425++,"I047", xI424, yHV, 24.625, 0, "ONLY");
gMC->Gspos("I425", indI425++,"I047", -xI424, yHV, -24.625, 0, "ONLY");
}
- LVname[0] = 'I';
- LVname[1] = '3';
- LVname[2] = '1';
- LVname[4] = '\0';
+ nameLV[0] = 'I';
+ nameLV[1] = '3';
+ nameLV[2] = '1';
+ nameLV[4] = '\0';
for (iSDD=0; iSDD<3; iSDD++) {
- LVname[3] = (Char_t)(48+iSDD+1);
+ nameLV[3] = (Char_t)(48+iSDD+1);
dits[0] = 1.350000;
dits[1] = 0.004423;
- dits[2] = (I047dits[2] - (2*iSDD+1)*I018dits[2] - I039dits[2])/2.;
- gMC->Gsvolu(LVname, "BOX ", idtmed[280], dits, 3);
- yLV = I018dits[1] - dits[0]*cos30 - dits[1]*sin30;
+ dits[2] = (iI047dits[2] - (2*iSDD+1)*iI018dits[2] - iI039dits[2])/2.;
+ gMC->Gsvolu(nameLV, "BOX ", idtmed[280], dits, 3);
+ yLV = iI018dits[1] - dits[0]*cos30 - dits[1]*sin30;
xLV = xI050 -
- fabs(yI050-yLV)*sin30/cos30 +
- (I050dits[1]+(2*iSDD+1)*dits[1])/cos30;
- zLV = I047dits[2] - dits[2];
- gMC->Gspos(LVname, 1,"I047", xLV, yLV, zLV, idrotm[346], "ONLY");
- gMC->Gspos(LVname, 2,"I047", xLV, yLV, -zLV, idrotm[346], "ONLY");
- gMC->Gspos(LVname, 3,"I047", -xLV, yLV, zLV, idrotm[347], "ONLY");
- gMC->Gspos(LVname, 4,"I047", -xLV, yLV, -zLV, idrotm[347], "ONLY");
+ TMath::Abs(yI050-yLV)*sin30/cos30 +
+ (iI050dits[1]+(2*iSDD+1)*dits[1])/cos30;
+ zLV = iI047dits[2] - dits[2];
+ gMC->Gspos(nameLV, 1,"I047", xLV, yLV, zLV, idrotm[346], "ONLY");
+ gMC->Gspos(nameLV, 2,"I047", xLV, yLV, -zLV, idrotm[346], "ONLY");
+ gMC->Gspos(nameLV, 3,"I047", -xLV, yLV, zLV, idrotm[347], "ONLY");
+ gMC->Gspos(nameLV, 4,"I047", -xLV, yLV, -zLV, idrotm[347], "ONLY");
}
gMC->Gspos("I018",13,"I048", -0.0001, 0.0, -18.25, 0, "ONLY");
gMC->Gspos("I018",14,"I048", -0.0001, 0.0, -25.55, 0, "ONLY");
gMC->Gspos("I024", 4,"I048", -0.0001, 0.0, -31.925, idrotm[355], "ONLY");
- HVname[0] = 'I';
- HVname[1] = '4';
- HVname[2] = '1';
- HVname[4] = '\0';
+ nameHV[0] = 'I';
+ nameHV[1] = '4';
+ nameHV[2] = '1';
+ nameHV[4] = '\0';
for (iSDD=0; iSDD<4; iSDD++) {
- HVname[3] = (Char_t)(48+iSDD+5);
+ nameHV[3] = (Char_t)(48+iSDD+5);
dits[0] = 1.350000;
- dits[1] = I425dits[1];
- dits[2] = (I048dits[2] - 2*I024dits[2] - Z_SDD_lay4[iSDD])/2.;
- gMC->Gsvolu(HVname, "BOX ", idtmed[279], dits, 3);
+ dits[1] = iI425dits[1];
+ dits[2] = (iI048dits[2] - 2*iI024dits[2] - zSDDlay4[iSDD])/2.;
+ gMC->Gsvolu(nameHV, "BOX ", idtmed[279], dits, 3);
xHV = -0.0001;
- yHV = -I048dits[1] + (2*iSDD+1)*dits[1];
- zHV = I048dits[2] - 2*I024dits[2] - dits[2];
- gMC->Gspos(HVname, 1,"I048", xHV, yHV, zHV, 0, "ONLY");
- gMC->Gspos(HVname, 2,"I048", xHV, yHV, -zHV, 0, "ONLY");
+ yHV = -iI048dits[1] + (2*iSDD+1)*dits[1];
+ zHV = iI048dits[2] - 2*iI024dits[2] - dits[2];
+ gMC->Gspos(nameHV, 1,"I048", xHV, yHV, zHV, 0, "ONLY");
+ gMC->Gspos(nameHV, 2,"I048", xHV, yHV, -zHV, 0, "ONLY");
gMC->Gspos("I425", indI425++,"I048", xI424, yHV, 31.925, 0, "ONLY");
gMC->Gspos("I425", indI425++,"I048", -xI424, yHV, -31.925, 0, "ONLY");
}
- LVname[0] = 'I';
- LVname[1] = '4';
- LVname[2] = '1';
- LVname[4] = '\0';
+ nameLV[0] = 'I';
+ nameLV[1] = '4';
+ nameLV[2] = '1';
+ nameLV[4] = '\0';
for (iSDD=0; iSDD<4; iSDD++) {
- LVname[3] = (Char_t)(48+iSDD+1);
+ nameLV[3] = (Char_t)(48+iSDD+1);
dits[0] = 1.350000;
dits[1] = 0.004423;
- dits[2] = (I048dits[2] - (2*iSDD+1)*I018dits[2] - I039dits[2])/2.;
- gMC->Gsvolu(LVname, "BOX ", idtmed[280], dits, 3);
- yLV = I018dits[1] - dits[0]*cos30 - dits[1]*sin30;
+ dits[2] = (iI048dits[2] - (2*iSDD+1)*iI018dits[2] - iI039dits[2])/2.;
+ gMC->Gsvolu(nameLV, "BOX ", idtmed[280], dits, 3);
+ yLV = iI018dits[1] - dits[0]*cos30 - dits[1]*sin30;
xLV = xI050 -
- fabs(yI050-yLV)*sin30/cos30 +
- (I050dits[1]+(2*iSDD+1)*dits[1])/cos30;
- zLV = I048dits[2] - dits[2];
- gMC->Gspos(LVname, 1,"I048", xLV, yLV, zLV, idrotm[346], "ONLY");
- gMC->Gspos(LVname, 2,"I048", xLV, yLV, -zLV, idrotm[346], "ONLY");
- gMC->Gspos(LVname, 3,"I048", -xLV, yLV, zLV, idrotm[347], "ONLY");
- gMC->Gspos(LVname, 4,"I048", -xLV, yLV, -zLV, idrotm[347], "ONLY");
+ TMath::Abs(yI050-yLV)*sin30/cos30 +
+ (iI050dits[1]+(2*iSDD+1)*dits[1])/cos30;
+ zLV = iI048dits[2] - dits[2];
+ gMC->Gspos(nameLV, 1,"I048", xLV, yLV, zLV, idrotm[346], "ONLY");
+ gMC->Gspos(nameLV, 2,"I048", xLV, yLV, -zLV, idrotm[346], "ONLY");
+ gMC->Gspos(nameLV, 3,"I048", -xLV, yLV, zLV, idrotm[347], "ONLY");
+ gMC->Gspos(nameLV, 4,"I048", -xLV, yLV, -zLV, idrotm[347], "ONLY");
}
gMC->Gspos("I200",21,"IS02",0.0,0.0,0.0,idrotm[892],"ONLY");
gMC->Gspos("I200",20,"IS02",0.0,0.0,0.0,idrotm[868],"ONLY");
gMC->Gspos("I200",19,"IS02",0.0,0.0,0.0,idrotm[893],"ONLY");
- gMC->Gspos("I098",1,"IS02",0.0,0.0,33.6,0,"ONLY");
- gMC->Gspos("I097",1,"IS02",0.0,0.0,26.6,0,"ONLY");
- gMC->Gspos("I097",2,"IS02",0.0,0.0,-26.6,idrotm[856],"ONLY");
- gMC->Gspos("I098",2,"IS02",0.0,0.0,-33.6,idrotm[856],"ONLY");
+ gMC->Gspos("I098",1,"IS02",0.0,0.0,33.6,0,"MANY");
+ gMC->Gspos("I097",1,"IS02",0.0,0.0,26.6,0,"MANY");
+ gMC->Gspos("I097",2,"IS02",0.0,0.0,-26.6,idrotm[856],"MANY");
+ gMC->Gspos("I098",2,"IS02",0.0,0.0,-33.6,idrotm[856],"MANY");
gMC->Gspos("I202",1,"IS02",12.1,0.0,33.84,0,"ONLY");
gMC->Gspos("I202",6,"IS02",-6.05,-10.4789,33.84,idrotm[930],"ONLY");
gMC->Gspos("I202",5,"IS02",-6.05,10.4789,33.84,idrotm[929],"ONLY");
// --- Place subdetectors' mother volumes and supports' mother volumes
// into ITS mother volume ITSD
- gMC->Gspos("IT12",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SPD mother volume
- gMC->Gspos("IT34",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SDD mother volume
- gMC->Gspos("IT56",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SSD mother volume
- gMC->Gspos("IS02",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SDD cones/supports
- gMC->Gspos("IS01",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SSD cones/supports
+ gMC->Gspos("IT12",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SPD mother volume
+ gMC->Gspos("IT34",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SDD mother volume
+ gMC->Gspos("IT56",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SSD mother volume
+ gMC->Gspos("IS02",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SDD cones/supports
+ gMC->Gspos("IS01",1,"ITSD",0.0,0.0,0.0,0,"MANY"); // SSD cones/supports
// **************************** SERVICES *********************************
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
// UPPER PART
- dgh[0] = 62.1;
+ dgh[0] = 62.;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 12.;
// -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART
// LOWER PART
- dgh[0] = 62.1;
+ dgh[0] = 62.;
dgh[1] = 74.5;
dgh[2] = 0.5;
dgh[3] = 192.;
dgh[1] = 59.;
dgh[2] = 0.6;
gMC->Gsvolu("ICYL", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74.1, 0, "ONLY");
- gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74.1, idrotm[200], "ONLY");
+ gMC->Gspos("ICYL", 1, "ALIC", 0., 0., -74.1,idrotm[199], "ONLY");
+ gMC->Gspos("ICYL", 2, "ALIC", 0., 0., 74.1, 0, "ONLY");
// --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS
dgh[1] = 12.;
dgh[2] = 5.;
gMC->Gsvolu("ISR2", "BOX ", idtmed[210], dgh, 3);
- gMC->Gspos("ISR2", 1, "ALIC", 53.5, 0., 125.5, 0, "ONLY");
+ gMC->Gspos("ISR2", 1, "ITSV", -53.5, 0., -125.5, idrotm[199], "MANY");
gMC->Gsvolu("ISR3", "BOX ", idtmed[210], dgh, 3);
- gMC->Gspos("ISR3", 1, "ALIC", -53.5, 0., 125.5, 0, "ONLY");
+ gMC->Gspos("ISR3", 1, "ITSV", 53.5, 0., -125.5, idrotm[199], "MANY");
dgh[0] = 5.-2.;
dgh[1] = 12.-2.;
dgh[1] = 5.;
dgh[2] = 2.;
gMC->Gsvolu("ISR6", "TUBE", idtmed[210], dgh, 3);
- gMC->Gspos("ISR6", 1, "ALIC", 0., 54., 77., 0, "ONLY");
- gMC->Gspos("ISR6", 2, "ALIC", 0., 54., -77., 0, "ONLY");
- gMC->Gspos("ISR6", 3, "ALIC", 0., -54., -77., 0, "ONLY");
+ gMC->Gspos("ISR6", 1, "ITSV", 0., 54., -77., idrotm[199], "MANY");
+ gMC->Gspos("ISR6", 2, "ITSV", 0., 54., 77., idrotm[199], "MANY");
+ gMC->Gspos("ISR6", 3, "ITSV", 0., -54., 77., idrotm[199], "MANY");
// --- Outputs the geometry tree in the EUCLID/CAD format
gMC->WriteEuclid("ITSgeometry", "ITSV", 1, 5);
}
+
+ {
+ if (!gGeoManager) {
+ AliError("TGeoManager doesn't exist !");
+ return;
+ }
+
+ //====== Converting mother volumes of alignable objects
+ //====== into TGeoAssemblies :
+
+ TObjArray *list = gGeoManager->GetListOfVolumes();
+
+ {
+ char spdLaddName[20] = "I10B";
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(spdLaddName,toTransform->GetName()) == 0);
+ }
+
+ // SPD 2
+ {
+ char spdLaddName[20] = "I20B";
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(spdLaddName, toTransform->GetName()) == 0);
+ }
+
+ //---
+
+ // SPD 1
+ {
+ char spdLaddName[20] = "I107"; // "I107"
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(spdLaddName,toTransform->GetName()) == 0);
+ }
+
+ // SPD 2
+ {
+ char spdLaddName[20] = "I1D7"; // "I1D7"
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(spdLaddName, toTransform->GetName()) == 0);
+ }
+
+ // SDD 1
+ {
+ char sddLaddName[20] = "I004";// "I302"
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddLaddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(sddLaddName, toTransform->GetName()) == 0);
+ }
+
+ // SDD 2
+ {
+ char sddLaddName[20] = "I005";// "I402"
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddLaddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(sddLaddName, toTransform->GetName()) == 0);
+ }
+
+
+ // SSD 1
+ {
+ char ssdLaddName[20] = "I565";// "I562"
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(ssdLaddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(ssdLaddName,toTransform->GetName()) == 0);
+ }
+
+ // SSD 2
+ {
+ char ssdLaddName[20] = "I569";// "I566"
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(ssdLaddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(ssdLaddName, toTransform->GetName()) == 0);
+ }
+
+
+ //====== Converting some virtual volumes to assemblies in order
+ //====== to avoid overlaps :
+
+ {
+ char sddName[20] = "I047";
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(sddName, toTransform->GetName()) == 0);
+ }
+
+ {
+ char sddName[20] = "I048";
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(sddName, toTransform->GetName()) == 0);
+ }
+
+ {
+ char sddName[20] = "I018";
+
+ TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddName);
+ Int_t index = list->IndexOf(toTransform);
+ do {
+ TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly
+ if (toTransform)
+ transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform);
+ if (transformed)
+ gGeoManager->ReplaceVolume(toTransform, transformed);
+ index++;
+ toTransform = (TGeoVolume*)list->At(index);
+ }
+ while (strcmp(sddName, toTransform->GetName()) == 0);
+ }
+
+
+ }
+
}
//______________________________________________________________________
void AliITSvPPRasymmFMD::CreateMaterials(){
Float_t epsilServ = 1.0E-3; // 0.003; // cm
Float_t stminServ = 0.0; //0.003; // cm "Default value used"
- // Freon
+ // Freon PerFluorobuthane C4F10 see
+ // http://st-support-cooling-electronics.web.cern.ch/
+ // st-support-cooling-electronics/default.htm
Float_t afre[2] = { 12.011,18.9984032 };
Float_t zfre[2] = { 6., 9. };
- Float_t wfre[2] = { 5.,12. };
- Float_t densfre = 1.5;
-
- // --- Define the various materials and media for GEANT ---
- // AliMaterial(Int_t imat, const char* name, Float_t a, Float_t z,
- // Float_t dens, Float_t radl, Float_t absl,
- // Float_t *buf=0, Int_t nwbuf=0)
- //AliMedium(Int_t numed, const char *name, Int_t nmat,
- // Int_t isvol, Int_t ifield, Float_t fieldm,
- // Float_t tmaxfd, Float_t stemax, Float_t deemax,
- // Float_t epsil, Float_t stmin, Float_t *ubuf=0, Int_t nbuf=0)
+ Float_t wfre[2] = { 4.,10. };
+ Float_t densfre = 1.52;
+
+
+ //CM55J
+
+ Float_t aCM55J[4]={12.0107,14.0067,15.9994,1.00794};
+ Float_t zCM55J[4]={6.,7.,8.,1.};
+ Float_t wCM55J[4]={0.908508078,0.010387573,0.055957585,0.025146765};
+ Float_t dCM55J = 1.63;
+
+ //ALCM55J
+
+ Float_t aALCM55J[5]={12.0107,14.0067,15.9994,1.00794,26.981538};
+ Float_t zALCM55J[5]={6.,7.,8.,1.,13.};
+ Float_t wALCM55J[5]={0.817657902,0.0093488157,0.0503618265,0.0226320885,0.1};
+ Float_t dALCM55J = 1.9866;
+
+ //Si Chips
+
+ Float_t aSICHIP[6]={12.0107,14.0067,15.9994,1.00794,28.0855,107.8682};
+ Float_t zSICHIP[6]={6.,7.,8.,1.,14., 47.};
+ Float_t wSICHIP[6]={0.039730642,0.001396798,0.01169634,0.004367771,0.844665,0.09814344903};
+ Float_t dSICHIP = 2.36436;
+
+ //Inox
+
+ Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,55.9961,95.94,55.845};
+ Float_t zINOX[9]={6.,25.,14.,15.,16., 28.,24.,42.,26.};
+ Float_t wINOX[9]={0.0003,0.02,0.01,0.00045,0.0003,0.12,0.17,0.025,0.654};
+ Float_t dINOX = 8.03;
+
+ //SDD HV microcable
+
+ Float_t aHVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
+ Float_t zHVm[5]={6.,1.,7.,8.,13.};
+ Float_t wHVm[5]={0.520088819984,0.01983871336,0.0551367996,0.157399667056, 0.247536};
+ Float_t dHVm = 1.6087;
+
+ //SDD LV+signal cable
+
+ Float_t aLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
+ Float_t zLVm[5]={6.,1.,7.,8.,13.};
+ Float_t wLVm[5]={0.21722436468,0.0082859922,0.023028867,0.06574077612, 0.68572};
+ Float_t dLVm = 2.1035;
+
+ //SDD hybrid microcab
+
+ Float_t aHLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
+ Float_t zHLVm[5]={6.,1.,7.,8.,13.};
+ Float_t wHLVm[5]={0.24281879711,0.00926228815,0.02574224025,0.07348667449, 0.64869};
+ Float_t dHLVm = 2.0502;
+
+ //SDD anode microcab
+
+ Float_t aALVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
+ Float_t zALVm[5]={6.,1.,7.,8.,13.};
+ Float_t wALVm[5]={0.392653705471,0.0128595919215,0.041626868025,0.118832707289, 0.431909};
+ Float_t dALVm = 2.0502;
+
+ //X7R capacitors
+
+ Float_t aX7R[7]={137.327,47.867,15.9994,58.6928,63.5460,118.710,207.2};
+ Float_t zX7R[7]={56.,22.,8.,28.,29.,50.,82.};
+ Float_t wX7R[7]={0.251639432,0.084755042,0.085975822,0.038244751,0.009471271,0.321736471,0.2081768};
+ Float_t dX7R = 7.14567;
+
+ // AIR
+
+ Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
+ Float_t zAir[4]={6.,7.,8.,18.};
+ Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
+ Float_t dAir = 1.20479E-3;
+
+ // Water
+
+ Float_t aWater[2]={1.00794,15.9994};
+ Float_t zWater[2]={1.,8.};
+ Float_t wWater[2]={0.111894,0.888106};
+ Float_t dWater = 1.0;
+
+ // CERAMICS
+ // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3
+ Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 };
+ Float_t zcer[5] = { 13., 8., 14., 25., 24. };
+ Float_t wcer[5] = {.4443408,.5213375,.0130872,.0178135,.003421};
+ Float_t denscer = 3.6;
+
+ //G10FR4
+
+ Float_t zG10FR4[14] = {14.00, 20.00, 13.00, 12.00, 5.00, 22.00, 11.00, 19.00, 26.00, 9.00, 8.00, 6.00, 7.00, 1.00};
+ Float_t aG10FR4[14] = {28.0855000,40.0780000,26.9815380,24.3050000,10.8110000,47.8670000,22.9897700,39.0983000,55.8450000,18.9984000,15.9994000,12.0107000,14.0067000,1.0079400};
+ Float_t wG10FR4[14] = {0.15144894,0.08147477,0.04128158,0.00904554,0.01397570,0.00287685,0.00445114,0.00498089,0.00209828,0.00420000,0.36043788,0.27529426,0.01415852,0.03427566};
+ Float_t densG10FR4= 1.8;
+
+ //--- EPOXY --- C18 H19 O3
+ Float_t aEpoxy[3] = {15.9994, 1.00794, 12.0107} ;
+ Float_t zEpoxy[3] = { 8., 1., 6.} ;
+ Float_t wEpoxy[3] = { 3., 19., 18.} ;
+ Float_t dEpoxy = 1.8 ;
+
+ // rohacell: C9 H13 N1 O2
+ Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
+ Float_t zrohac[4] = { 6., 1., 7., 8.};
+ Float_t wrohac[4] = { 9., 13., 1., 2.};
+ Float_t drohac = 0.05;
+
+ // If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then
+//
+// %Al=81.6164 %inox=100-%Al
+
+ Float_t aInAl[5] = {27., 55.847,51.9961,58.6934,28.0855 };
+ Float_t zInAl[5] = {13., 26.,24.,28.,14. };
+ Float_t wInAl[5] = {.816164, .131443,.0330906,.0183836,.000919182};
+ Float_t dInAl = 3.075;
+
+ // Kapton
+
+ Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
+ Float_t zKapton[4]={1.,6.,7.,8.};
+ Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
+ Float_t dKapton = 1.42;
+
+ //SDD ruby sph.
+ Float_t aAlOxide[2] = { 26.981539,15.9994};
+ Float_t zAlOxide[2] = { 13., 8.};
+ Float_t wAlOxide[2] = {0.4707, 0.5293};
+ Float_t dAlOxide = 3.97;
+
+
AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(1,"SI$",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
AliMaterial(3,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(3,"SPD SI BUS$",3,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
- AliMaterial(4,"C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
+ AliMixture(4,"C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
AliMedium(4,"C (M55J)$",4,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(5,"AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ AliMixture(5,"AIR$",aAir,zAir,dAir,4,wAir);
AliMedium(5,"AIR$",5,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
- AliMaterial(6,"GEN AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ AliMixture(6,"GEN AIR$",aAir,zAir,dAir,4,wAir);
AliMedium(6,"GEN AIR$",6,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
- AliMaterial(7,"SDD SI CHIP$",0.374952E+02,0.178184E+02,0.24485E+01,0.76931E+01,0.99900E+03);
+ AliMixture(7,"SDD SI CHIP$",aSICHIP,zSICHIP,dSICHIP,6,wSICHIP);
AliMedium(7,"SDD SI CHIP$",7,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
- AliMaterial(9,"SDD C (M55J)$",0.123565E+02,0.64561E+01,0.18097E+01,0.229570E+02,0.99900E+03);
+ AliMixture(9,"SDD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
AliMedium(9,"SDD C (M55J)$",9,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(10,"SDD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ AliMixture(10,"SDD AIR$",aAir,zAir,dAir,4,wAir);
AliMedium(10,"SDD AIR$",10,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
AliMaterial(11,"AL$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
AliMedium(11,"AL$",11,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(12,"WATER$",0.14322E+02,0.72167E+01,0.10000E+01,0.35759E+02,0.94951E+02);
+ AliMixture(12, "Water$",aWater,zWater,dWater,2,wWater);
AliMedium(12,"WATER$",12,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre);
AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
AliMedium(14,"COPPER$",14,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(15,"CERAMICS$",0.22314E+02,0.10856E+02,0.36000E+01,0.76200E+01,0.31901E+02);
+ AliMixture(15,"CERAMICS$",acer,zcer,denscer,5,wcer);
AliMedium(15,"CERAMICS$",15,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(20,"SSD C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
+ AliMixture(20,"SSD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
AliMedium(20,"SSD C (M55J)$",20,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(21,"SSD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ AliMixture(21,"SSD AIR$",aAir,zAir,dAir,4,wAir);
AliMedium(21,"SSD AIR$",21,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
- AliMaterial(25,"G10FR4$",0.17749E+02,0.88750E+01,0.18000E+01,0.21822E+02,0.99900E+03);
+ AliMixture(25,"G10FR4$",aG10FR4,zG10FR4,densG10FR4,14,wG10FR4);
AliMedium(25,"G10FR4$",25,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(26,"GEN C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
+ AliMixture(26,"GEN C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
AliMedium(26,"GEN C (M55J)$",26,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(27,"GEN Air$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ AliMixture(27,"GEN Air$",aAir,zAir,dAir,4,wAir);
AliMedium(27,"GEN Air$",27,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMaterial(53,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(53,"SPD SI BUS$",53,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
- AliMaterial(54,"SPD C (M55J)$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
+ AliMixture(54,"SPD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
AliMedium(54,"SPD C (M55J)$",54,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(55,"SPD AIR$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
+ AliMixture(55,"SPD AIR$",aAir,zAir,dAir,4,wAir);
AliMedium(55,"SPD AIR$",55,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
- AliMaterial(56,"SPD KAPTON(POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
+ AliMixture(56, "SPD KAPTON(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(61,"EPOXY$",0.17749E+02,0.88750E+01,0.18000E+01,0.21822E+02,0.99900E+03);
+ AliMixture(61,"EPOXY$",aEpoxy,zEpoxy,dEpoxy,-3,wEpoxy);
AliMedium(61,"EPOXY$",61,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMaterial(62,"SILICON$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(62,"SILICON$",62,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
- AliMaterial(63,"KAPTONH(POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
+ AliMixture(63, "KAPTONH(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
AliMedium(63,"KAPTONH(POLYCH2)$",63,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
AliMedium(64,"ALUMINUM$",64,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(65,"INOX$",0.55098E+02,0.2572E+02,0.7900E+01,0.17800E+01,0.99900E+03);
+ AliMixture(65,"INOX$",aINOX,zINOX,dINOX,9,wINOX);
AliMedium(65,"INOX$",65,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(68,"ROHACELL$",0.123974E+02,0.62363E+01,0.500E-01,0.80986E+03,0.99900E+03);
+ AliMixture(68,"ROHACELL$",arohac,zrohac,drohac,-4,wrohac);
AliMedium(68,"ROHACELL$",68,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(69,"SDD C AL (M55J)$",0.138802E+02,0.71315E+01,0.19837E+01,0.176542E+02,0.99900E+03);
+ AliMixture(69,"SDD C AL (M55J)$",aALCM55J,zALCM55J,dALCM55J,5,wALCM55J);
AliMedium(69,"SDD C AL (M55J)$",69,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(70,"SDDKAPTON (POLYCH2)$",0.14000E+02,0.71770E+01,0.13000E+01,0.31270E+02,0.99900E+03);
+ AliMixture(70, "SDDKAPTON (POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
AliMedium(70,"SDDKAPTON (POLYCH2)$",70,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
+ AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
AliMedium(71,"ITS SANDW A$",71,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMaterial(72,"ITS SANDW B$",0.12011E+02,0.60000E+01,0.27000E+00,0.18956E+03,0.99900E+03);
AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(75,"ELASTO SIL$",75,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
+ // SPD bus (data from Petra Riedler)
+ Float_t aSPDbus[5] = {1.00794,12.0107,14.01,15.9994,26.982 };
+ Float_t zSPDbus[5] = {1.,6.,7.,8.,13.};
+ Float_t wSPDbus[5] = {0.023523,0.318053,0.009776,0.078057,0.570591};
+ Float_t dSPDbus = 2.128505;
+
+ // AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
+ AliMixture(76,"SPDBUS(AL+KPT+EPOX)$",aSPDbus,zSPDbus,dSPDbus,5,wSPDbus);
AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(77,"SDD X7R capacitors$",0.1157516E+03,0.477056E+02,0.67200E+01,0.14236E+01,0.99900E+03);
+ AliMixture(77,"SDD X7R capacitors$",aX7R,zX7R,dX7R,7,wX7R);
AliMedium(77,"SDD X7R capacitors$",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(78,"SDD ruby sph. Al2O3$",0.218101E+02,0.106467E+02,0.39700E+01,0.48539E+01,0.99900E+03);
+ AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide);
AliMedium(78,"SDD ruby sph. Al2O3$",78,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
AliMedium(79,"SDD SI insensitive$",79,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(80,"SDD HV microcable$",0.159379E+02,0.78598E+01,0.16087E+01,0.217906E+02,0.99900E+03);
+ AliMixture(80,"SDD HV microcable$",aHVm,zHVm,dHVm,5,wHVm);
AliMedium(80,"SDD HV microcable$",80,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(81,"SDD LV+signal cable$",0.223689E+02,0.108531+02,0.21035E+01,0.13440E+02,0.99900E+03);
+ AliMixture(81,"SDD LV+signal cable$",aLVm,zLVm,dLVm,5,wLVm);
AliMedium(81,"SDD LV+signal cable$",81,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(82,"SDD hybrid microcab$",0.218254E+02,0.106001E+02,0.20502E+01,0.137308E+02,0.99900E+03);
+ AliMixture(82,"SDD hybrid microcab$",aHLVm, zHLVm,dHLVm,5,wHLVm);
AliMedium(82,"SDD hybrid microcab$",82,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(83,"SDD anode microcab$",0.186438E+02,0.91193E+01,0.17854E+01,0.176451E+02,0.99900E+03);
+ AliMixture(83,"SDD anode microcab$",aALVm,zALVm,dALVm,5,wALVm);
AliMedium(83,"SDD anode microcab$",83,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
-
- AliMaterial(84,"SDD/SSD rings$",0.123565E+02,0.64561E+01,0.18097E+01,0.229570E+02,0.99900E+03);
+ Float_t aDSring[4]={12.0107, 1.00794, 14.0067, 15.9994};
+ Float_t zDSring[4]={ 6., 1., 7., 8.};
+ Float_t wDSring[4]={ 0.854323888, 0.026408778, 0.023050265, 0.096217069};
+ Float_t dDSring = 0.2875;
+ AliMixture(84,"SDD/SSD rings$",aDSring,zDSring,dDSring,4,wDSring);
AliMedium(84,"SDD/SSD rings$",84,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
- AliMaterial(85,"inox/alum$",0.321502E+02,0.153383E+02,0.30705E+01,0.69197E+01,0.99900E+03);
+ AliMixture(85,"inox/alum$",aInAl,zInAl,dInAl,5,wInAl);
AliMedium(85,"inox/alum$",85,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
// special media to take into account services in the SDD and SSD
//End_Html
// AliMaterial(86,"AIRFMDSDD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
- Float_t A[13],Z[13],W[13],den;
+ Float_t aA[13],zZ[13],wW[13],den;
// From Pierluigi Barberis calculations of 2SPD+1SDD October 2 2002.
- Z[0] = 1.0; A[0] = 1.00794; // Hydrogen
- Z[1] = 6.0; A[1] = 12.011; // Carbon
- Z[2] = 7.0; A[2] = 14.00674; // Nitrogen
- Z[3] = 8.0; A[3] = 15.9994; // Oxigen
- Z[4] = 14.0; A[4] = 28.0855; // Silicon
- Z[5] = 24.0; A[5] = 51.9961; //Cromium
- Z[6] = 25.0; A[6] = 54.938049; // Manganese
- Z[7] = 26.0; A[7] = 55.845; // Iron
- Z[8] = 28.0; A[8] = 58.6934; // Nickle
- Z[9] = 29.0; A[9] = 63.546; // Copper
- Z[10] = 13.0; A[10] = 26.981539; // Alulminum
- Z[11] = 47.0; A[11] = 107.8682; // Silver
- Z[12] = 27.0; A[12] = 58.9332; // Cobolt
- W[0] = 0.019965;
- W[1] = 0.340961;
- W[2] = 0.041225;
- W[3] = 0.200352;
- W[4] = 0.000386;
- W[5] = 0.001467;
- W[6] = 0.000155;
- W[7] = 0.005113;
- W[8] = 0.000993;
- W[9] = 0.381262;
- W[10] = 0.008121;
- W[11] = 0.000000;
- W[12] = 0.000000;
+ zZ[0] = 1.0; aA[0] = 1.00794; // Hydrogen
+ zZ[1] = 6.0; aA[1] = 12.011; // Carbon
+ zZ[2] = 7.0; aA[2] = 14.00674; // Nitrogen
+ zZ[3] = 8.0; aA[3] = 15.9994; // Oxigen
+ zZ[4] = 14.0; aA[4] = 28.0855; // Silicon
+ zZ[5] = 24.0; aA[5] = 51.9961; //Cromium
+ zZ[6] = 25.0; aA[6] = 54.938049; // Manganese
+ zZ[7] = 26.0; aA[7] = 55.845; // Iron
+ zZ[8] = 28.0; aA[8] = 58.6934; // Nickle
+ zZ[9] = 29.0; aA[9] = 63.546; // Copper
+ zZ[10] = 13.0; aA[10] = 26.981539; // Alulminum
+ zZ[11] = 47.0; aA[11] = 107.8682; // Silver
+ zZ[12] = 27.0; aA[12] = 58.9332; // Cobolt
+ wW[0] = 0.019965;
+ wW[1] = 0.340961;
+ wW[2] = 0.041225;
+ wW[3] = 0.200352;
+ wW[4] = 0.000386;
+ wW[5] = 0.001467;
+ wW[6] = 0.000155;
+ wW[7] = 0.005113;
+ wW[8] = 0.000993;
+ wW[9] = 0.381262;
+ wW[10] = 0.008121;
+ wW[11] = 0.000000;
+ wW[12] = 0.000000;
if(fByThick){// New values seeITS_MatBudget_4B.xls
den = 1.5253276; // g/cm^3 Cell O370
}else{
den = 2.58423412; // g/cm^3 Cell L370
} // end if fByThick
//den = 6161.7/(3671.58978);//g/cm^3 Volume does not exclude holes
- AliMixture(86,"AIRFMDSDD$",A,Z,den,+11,W);
+ AliMixture(86,"AIRFMDSDD$",aA,zZ,den,+11,wW);
AliMedium(86,"AIRFMDSDD$",86,0,ifield,fieldm,tmaxfdAir,stemaxAir,
deemaxAir,epsilAir,stminAir);
//AliMaterial(87,"AIRFMDSSD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
// From Pierluigi Barberis calculations of SSD October 2 2002.
- W[0] = 0.019777;
- W[1] = 0.325901;
- W[2] = 0.031848;
- W[3] = 0.147668;
- W[4] = 0.030609;
- W[5] = 0.013993;
- W[6] = 0.001479;
- W[7] = 0.048792;
- W[8] = 0.009477;
- W[9] = 0.350697;
- W[10] = 0.014546;
- W[11] = 0.005213;
- W[12] = 0.000000;
+ wW[0] = 0.019777;
+ wW[1] = 0.325901;
+ wW[2] = 0.031848;
+ wW[3] = 0.147668;
+ wW[4] = 0.030609;
+ wW[5] = 0.013993;
+ wW[6] = 0.001479;
+ wW[7] = 0.048792;
+ wW[8] = 0.009477;
+ wW[9] = 0.350697;
+ wW[10] = 0.014546;
+ wW[11] = 0.005213;
+ wW[12] = 0.000000;
if(fByThick){// New values seeITS_MatBudget_4B.xls
den = 1.2464275; // g/cm^3 Cell O403
}else{
den = 1.28134409; // g/cm^3 Cell L403
} // end if fByThick
//den = 7666.3/(9753.553259); // volume does not exclude holes
- AliMixture(87,"AIRFMDSSD$",A,Z,den,+12,W);
+ AliMixture(87,"AIRFMDSSD$",aA,zZ,den,+12,wW);
AliMedium(87,"AIRFMDSSD$",87,0,ifield,fieldm,tmaxfdAir,stemaxAir,
deemaxAir,epsilAir,stminAir);
//AliMaterial(88,"ITS SANDW CFMDSDD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
// From Pierluigi Barberis calculations of 1SDD+Carbon fiber October 2 2002
- W[0] = 0.016302;
- W[1] = 0.461870;
- W[2] = 0.033662;
- W[3] = 0.163595;
- W[4] = 0.000315;
- W[5] = 0.001197;
- W[6] = 0.000127;
- W[7] = 0.004175;
- W[8] = 0.000811;
- W[9] = 0.311315;
- W[10] = 0.006631;
- W[11] = 0.000000;
- W[12] = 0.000000;
+ wW[0] = 0.016302;
+ wW[1] = 0.461870;
+ wW[2] = 0.033662;
+ wW[3] = 0.163595;
+ wW[4] = 0.000315;
+ wW[5] = 0.001197;
+ wW[6] = 0.000127;
+ wW[7] = 0.004175;
+ wW[8] = 0.000811;
+ wW[9] = 0.311315;
+ wW[10] = 0.006631;
+ wW[11] = 0.000000;
+ wW[12] = 0.000000;
if(fByThick){// New values seeITS_MatBudget_4B.xls
den = 1.9353276; // g/cm^3 Cell N370
}else{
den = 3.2788626; // g/cm^3 Cell F370
} // end if fByThick
//den = 7667.1/(3671.58978); // Volume does not excludeholes
- AliMixture(88,"ITS SANDW CFMDSDD$",A,Z,den,+11,W);
+ AliMixture(88,"ITS SANDW CFMDSDD$",aA,zZ,den,+11,wW);
AliMedium(88,"ITS SANDW CFMDSDD$",88,0,ifield,fieldm,tmaxfd,stemax,
deemax,epsil,stmin);
//AliMaterial(89,"ITS SANDW CFMDSSD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
// From Pierluigi Barberis calculations of SSD+Carbon fiber October 2 2002.
- W[0] = 0.014065;
- W[1] = 0.520598;
- W[2] = 0.022650;
- W[3] = 0.105018;
- W[4] = 0.021768;
- W[5] = 0.009952;
- W[6] = 0.001051;
- W[7] = 0.034700;
- W[8] = 0.006740;
- W[9] = 0.249406;
- W[10] = 0.010345;
- W[11] = 0.0003707;
- W[12] = 0.000000;
+ wW[0] = 0.014065;
+ wW[1] = 0.520598;
+ wW[2] = 0.022650;
+ wW[3] = 0.105018;
+ wW[4] = 0.021768;
+ wW[5] = 0.009952;
+ wW[6] = 0.001051;
+ wW[7] = 0.034700;
+ wW[8] = 0.006740;
+ wW[9] = 0.249406;
+ wW[10] = 0.010345;
+ wW[11] = 0.0003707;
+ wW[12] = 0.000000;
if(fByThick){// New values seeITS_MatBudget_4B.xls
den = 1.6564275; // g/cm^3 Cell N304
}else{
den = 1.7028296; // g/cm^3 Cell F304
} // end if fByThick
//den = 1166.5/(3671.58978); // Volume does not exclude holes
- AliMixture(89,"ITS SANDW CFMDSSD$",A,Z,den,+12,W);
+ AliMixture(89,"ITS SANDW CFMDSSD$",aA,zZ,den,+12,wW);
AliMedium(89,"ITS SANDW CFMDSSD$",89,0,ifield,fieldm,tmaxfd,stemax,
deemax,epsil,stmin);
//AliMaterial(97,"SPD SERVICES$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
// From Pierluigi Barberis calculations of 1SPD October 2 2002.
- W[0] = 0.005970;
- W[1] = 0.304704;
- W[2] = 0.042510;
- W[3] = 0.121715;
- W[4] = 0.001118;
- W[5] = 0.030948;
- W[6] = 0.003270;
- W[7] = 0.107910;
- W[8] = 0.020960;
- W[9] = 0.360895;
- W[10] = 0.000000;
- W[11] = 0.000000;
- W[12] = 0.000000;
+ wW[0] = 0.005970;
+ wW[1] = 0.304704;
+ wW[2] = 0.042510;
+ wW[3] = 0.121715;
+ wW[4] = 0.001118;
+ wW[5] = 0.030948;
+ wW[6] = 0.003270;
+ wW[7] = 0.107910;
+ wW[8] = 0.020960;
+ wW[9] = 0.360895;
+ wW[10] = 0.000000;
+ wW[11] = 0.000000;
+ wW[12] = 0.000000;
if(fByThick){// New values seeITS_MatBudget_4B.xls
den = 80.31136576; // g/cm^3 Cell H329
}else{
den = 87.13062; // g/cm^3 Cell G329
} // end if fByThick
//den = 1251.3/(0.05*2.0*TMath::Pi()*(7.75*7.75 - 3.7*3.7)); // g/cm^3
- AliMixture(97,"SPD SERVICES$",A,Z,den,+10,W);
+ AliMixture(97,"SPD SERVICES$",aA,zZ,den,+10,wW);
AliMedium(97,"SPD SERVICES$",97,0,ifield,fieldm,tmaxfd,stemax,
deemax,epsil,stmin);
AliMaterial(90,"SPD shield$", 12.011, 6., 1.93/10. , 22.1*10., 999);
AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
- AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
+ // SPD End Ladder (data from Petra Riedler)
+ Float_t aSPDel[5] = {1.00794,12.0107,14.01,15.9994,63.54 };
+ Float_t zSPDel[5] = {1.,6.,7.,8.,29.};
+ Float_t wSPDel[5] = {0.004092,0.107274,0.011438,0.032476,0.844719};
+ Float_t dSPDel = 3.903403;
+
+ // AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
+ AliMixture(91,"SPD End ladder$",aSPDel,zSPDel,dSPDel,5,wSPDel);
AliMedium(91,"SPD End ladder$",91,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
AliMedium(92,"SPD cone$",92,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
-
+ /* Material with fractional Z not actually used
AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
AliMedium(93,"SDD End ladder$",93,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
-
+ */
AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999);
AliMedium(94,"SDD cone$",94,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
-
+ /* Material with fractional Z not actually used
AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
AliMedium(95,"SSD End ladder$",95,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
-
+ */
AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
}
// none.
// Return:
// none.
-
- if(strcmp(gMC->GetName(),"TGeant3")) {
- Error("InitAliITSgeom",
- "Wrong Monte Carlo. InitAliITSgeom uses TGeant3 calls");
- return;
- } // end if
- cout << "Reading Geometry transformation directly from Geant 3." << endl;
- const Int_t nlayers = 6;
- const Int_t ndeep = 9;
- Int_t itsGeomTreeNames[nlayers][ndeep],lnam[20],lnum[20];
- Int_t nlad[nlayers],ndet[nlayers];
- Double_t t[3],r[10];
- Float_t par[20],att[20];
- Int_t npar,natt,idshape,imat,imed;
- AliITSGeant3Geometry *ig = new AliITSGeant3Geometry();
- Int_t mod,lay,lad,det,i,j,k;
- Char_t names[nlayers][ndeep][4];
- Int_t itsGeomTreeCopys[nlayers][ndeep];
- if(fMinorVersion == 1){ // Option A
- Char_t *namesA[nlayers][ndeep] = {
- {"ALIC","ITSV","ITSD","IT12","I12A","I10A","I103","I101","ITS1"}, // lay=1
- {"ALIC","ITSV","ITSD","IT12","I12A","I20A","I1D3","I1D1","ITS2"}, // lay=2
- {"ALIC","ITSV","ITSD","IT34","I004","I302","ITS3"," "," "}, // lay=3
- {"ALIC","ITSV","ITSD","IT34","I005","I402","ITS4"," "," "}, // lay=4
- {"ALIC","ITSV","ITSD","IT56","I565","I562","ITS5"," "," "}, // lay=5
- {"ALIC","ITSV","ITSD","IT56","I569","I566","ITS6"," "," "}};// lay=6
- Int_t itsGeomTreeCopysA[nlayers][ndeep]= {{1,1,1,1,10, 2, 4,1,1},// lay=1
- {1,1,1,1,10, 4, 4,1,1},// lay=2
- {1,1,1,1,14, 6, 1,0,0},// lay=3
- {1,1,1,1,22, 8, 1,0,0},// lay=4
- {1,1,1,1,34,22, 1,0,0},// lay=5
- {1,1,1,1,38,25, 1,0,0}};//lay=6
- for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++){
- for(k=0;k<4;k++) names[i][j][k] = namesA[i][j][k];
- itsGeomTreeCopys[i][j] = itsGeomTreeCopysA[i][j];
- } // end for i,j
- }else if(fMinorVersion == 2){ // Option B
- Char_t *namesB[nlayers][ndeep] = {
- {"ALIC","ITSV","ITSD","IT12","I12B","I10B","I107","I101","ITS1"}, // lay=1
- {"ALIC","ITSV","ITSD","IT12","I12B","I20B","I1D7","I1D1","ITS2"}, // lay=2
- {"ALIC","ITSV","ITSD","IT34","I004","I302","ITS3"," "," "}, // lay=3
- {"ALIC","ITSV","ITSD","IT34","I005","I402","ITS4"," "," "}, // lay=4
- {"ALIC","ITSV","ITSD","IT56","I565","I562","ITS5"," "," "}, // lay=5
- {"ALIC","ITSV","ITSD","IT56","I569","I566","ITS6"," "," "}};// lay=6
- Int_t itsGeomTreeCopysB[nlayers][ndeep]= {{1,1,1,1,10, 2, 4,1,1},// lay=1
- {1,1,1,1,10, 4, 4,1,1},// lay=2
- {1,1,1,1,14, 6, 1,0,0},// lay=3
- {1,1,1,1,22, 8, 1,0,0},// lay=4
- {1,1,1,1,34,22, 1,0,0},// lay=5
- {1,1,1,1,38,25, 1,0,0}};//lay=6
- for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++){
- for(k=0;k<4;k++) names[i][j][k] = namesB[i][j][k];
- itsGeomTreeCopys[i][j] = itsGeomTreeCopysB[i][j];
- } // end for i,j
- } // end if fMinorVersion
- // Sorry, but this is not very pritty code. It should be replaced
- // at some point with a version that can search through the geometry
- // tree its self.
- cout << "Reading Geometry informaton from Geant3 common blocks" << endl;
- for(i=0;i<20;i++) lnam[i] = lnum[i] = 0;
- for(i=0;i<nlayers;i++)for(j=0;j<ndeep;j++)
- strncpy((char*) &itsGeomTreeNames[i][j],names[i][j],4);
- // itsGeomTreeNames[i][j] = ig->StringToInt(names[i][j]);
+ const Int_t knlayers = 6;
+ const Int_t kndeep = 3;
+ const AliITSDetector idet[knlayers]={kSPD,kSPD,kSDD,kSDD,kSSD,kSSD};
+ const TString names[2][knlayers] = {
+ {"/ALIC_1/ITSV_1/ITSD_1/IT12_1/I12A_%d/I10A_%d/I103_%d/I101_1/ITS1_1", // lay=1
+ "/ALIC_1/ITSV_1/ITSD_1/IT12_1/I12A_%d/I20A_%d/I1D3_%d/I1D1_1/ITS2_1", // lay=2
+ "/ALIC_1/ITSV_1/ITSD_1/IT34_1/I004_%d/I302_%d/ITS3_%d", // lay=3
+ "/ALIC_1/ITSV_1/ITSD_1/IT34_1/I005_%d/I402_%d/ITS4_%d", // lay=4
+ "/ALIC_1/ITSV_1/ITSD_1/IT56_1/I565_%d/I562_%d/ITS5_%d", // lay=5
+ "/ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_%d/I566_%d/ITS6_%d"},// lay=6
+ {"/ALIC_1/ITSV_1/ITSD_1/IT12_1/I12B_%d/I10B_%d/I107_%d/I101_1/ITS1_1", // lay=1
+ "/ALIC_1/ITSV_1/ITSD_1/IT12_1/I12B_%d/I20B_%d/I1D7_%d/I1D1_1/ITS2_1", // lay=2
+ "/ALIC_1/ITSV_1/ITSD_1/IT34_1/I004_%d/I302_%d/ITS3_%d", // lay=3
+ "/ALIC_1/ITSV_1/ITSD_1/IT34_1/I005_%d/I402_%d/ITS4_%d", // lay=4
+ "/ALIC_1/ITSV_1/ITSD_1/IT56_1/I565_%d/I562_%d/ITS5_%d", // lay=5
+ "/ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_%d/I566_%d/ITS6_%d"}
+ };
+ const Int_t itsGeomTreeCopys[knlayers][kndeep]= {{10, 2, 4},// lay=1
+ {10, 4, 4},// lay=2
+ {14, 6, 1},// lay=3
+ {22, 8, 1},// lay=4
+ {34,22, 1},// lay=5
+ {38,25, 1}};//lay=6
+ Int_t nlad[knlayers],ndet[knlayers];
+ Int_t mod,lay,lad=0,det=0,i,j,k,cp0,cp1,cp2;
+ TString path,shapeName;
+ TGeoHMatrix materix;
+ Double_t trans[3]={3*0.0},rot[10]={9*0.0,1.0};
+ TArrayD shapePar;
+ TArrayF shapeParF;
+
+ AliDebug(1,"Reading Geometry transformation directly from Modler.");
mod = 0;
- for(i=0;i<nlayers;i++){
- k = 1;
- for(j=0;j<ndeep;j++) if(itsGeomTreeCopys[i][j]!=0)
- k *= TMath::Abs(itsGeomTreeCopys[i][j]);
- mod += k;
+ for(i=0;i<knlayers;i++){
+ k = 1;
+ for(j=0;j<kndeep;j++) if(itsGeomTreeCopys[i][j]!=0)
+ k *= TMath::Abs(itsGeomTreeCopys[i][j]);
+ mod += k;
} // end for i
- if(fITSgeom!=0) delete fITSgeom;
+ if(GetITSgeom()!=0) delete GetITSgeom();
+ SetITSgeom(0);
nlad[0]=20;nlad[1]=40;nlad[2]=14;nlad[3]=22;nlad[4]=34;nlad[5]=38;
- ndet[0]=4;ndet[1]=4;ndet[2]=6;ndet[3]=8;ndet[4]=22;ndet[5]=25;
- fITSgeom = new AliITSgeom(0,6,nlad,ndet,mod);
- mod = -1;
- for(lay=1;lay<=nlayers;lay++){
- for(j=0;j<ndeep;j++) lnam[j] = itsGeomTreeNames[lay-1][j];
- for(j=0;j<ndeep;j++) lnum[j] = itsGeomTreeCopys[lay-1][j];
- switch (lay){
- case 1: case 2: // layers 1 and 2 are a bit special
- lad = 0;
- for(j=1;j<=itsGeomTreeCopys[lay-1][4];j++){
- lnum[4] = j;
- for(k=1;k<=itsGeomTreeCopys[lay-1][5];k++){
- lad++;
- lnum[5] = k;
- for(det=1;det<=itsGeomTreeCopys[lay-1][6];det++){
- lnum[6] = det;
- mod++;
- ig->GetGeometry(ndeep,lnam,lnum,t,r,idshape,npar,natt,
- par,att,imat,imed);
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSPD,t,r);
- if(!(fITSgeom->IsShapeDefined((Int_t)kSPD)))
- fITSgeom->ReSetShape(kSPD,
- new AliITSgeomSPD425Short(npar,par));
- } // end for det
- } // end for k
- } // end for j
- break;
- case 3: case 4: case 5: case 6: // layers 3-6
- lnum[6] = 1;
- for(lad=1;lad<=itsGeomTreeCopys[lay-1][4];lad++){
- lnum[4] = lad;
- for(det=1;det<=itsGeomTreeCopys[lay-1][5];det++){
- lnum[5] = det;
- mod++;
- ig->GetGeometry(7,lnam,lnum,t,r,idshape,npar,natt,
- par,att,imat,imed);
- switch (lay){
- case 3: case 4:
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSDD,t,r);
- if(!(fITSgeom->IsShapeDefined(kSDD)))
- fITSgeom->ReSetShape(kSDD,
- new AliITSgeomSDD256(npar,par));
- break;
- case 5:
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSSD,t,r);
- if(!(fITSgeom->IsShapeDefined(kSSD)))
- fITSgeom->ReSetShape(kSSD,
- new AliITSgeomSSD275and75(npar,par));
- break;
- case 6:
- fITSgeom->CreatMatrix(mod,lay,lad,det,kSSD,t,r);
- if(!(fITSgeom->IsShapeDefined(kSSD)))
- fITSgeom->ReSetShape(kSSD,
- new AliITSgeomSSD75and275(npar,par));
- break;
- } // end switch
- } // end for det
- } // end for lad
- break;
- } // end switch
+ ndet[0]= 4;ndet[1]= 4;ndet[2]= 6;ndet[3]= 8;ndet[4]=22;ndet[5]=25;
+ AliITSgeom* geom = new AliITSgeom(0,6,nlad,ndet,mod);
+ SetITSgeom(geom);
+ mod = 0;
+ for(lay=1;lay<=knlayers;lay++){
+ for(cp0=1;cp0<=itsGeomTreeCopys[lay-1][0];cp0++){
+ for(cp1=1;cp1<=itsGeomTreeCopys[lay-1][1];cp1++){
+ for(cp2=1;cp2<=itsGeomTreeCopys[lay-1][2];cp2++){
+ path.Form(names[fMinorVersion-1][lay-1].Data(),
+ cp0,cp1,cp2);
+ switch (lay){
+ case 1:{
+ det = cp2;
+ lad = cp1+2*(cp0-1);
+ }break;
+ case 2:{
+ det = cp2;
+ lad = cp1+4*(cp0-1);
+ } break;
+ case 3: case 4: case 5: case 6:{
+ det = cp1;
+ lad = cp0;
+ } break;
+ } // end switch
+ //AliInfo(Form("path=%s lay=%d lad=%d det=%d",
+ // path.Data(),lay,lad,det));
+ gMC->GetTransformation(path.Data(),materix);
+ gMC->GetShape(path.Data(),shapeName,shapePar);
+ shapeParF.Set(shapePar.GetSize());
+ for(i=0;i<shapePar.GetSize();i++) shapeParF[i]=shapePar[i];
+ geom->CreatMatrix(mod,lay,lad,det,idet[lay-1],trans,rot);
+ geom->SetTrans(mod,materix.GetTranslation());
+ geom->SetRotMatrix(mod,materix.GetRotationMatrix());
+ switch (lay){
+ case 1: case 2:{
+ geom->ReSetShape(kSPD,new AliITSgeomSPD425Short(
+ shapeParF.GetSize(),shapeParF.GetArray()));
+ }break;
+ case 3: case 4:{
+ geom->ReSetShape(kSDD,new AliITSgeomSDD256(
+ shapeParF.GetSize(),shapeParF.GetArray()));
+ }break;
+ case 5: case 6:{
+ geom->ReSetShape(kSSD,new AliITSgeomSSD75and275(
+ shapeParF.GetSize(),shapeParF.GetArray()));
+ }break;
+ default:{
+ }break;
+ } // end switch
+ mod++;
+ } /// end for cp2
+ } // end for cp1
+ } // end for cp0
} // end for lay
return;
}
// none.
// Return:
// none.
- Int_t i;
- cout << endl;
- for(i=0;i<26;i++) cout << "*";
- cout << " ITSvPPRasymm" << fMinorVersion << "_Init ";
- for(i=0;i<25;i++) cout << "*";cout << endl;
+ AliInfo(Form("Minor version %d",fMinorVersion));
//
if(fRead[0]=='\0') strncpy(fRead,fEuclidGeomDet,60);
if(fWrite[0]=='\0') strncpy(fWrite,fEuclidGeomDet,60);
- if(fITSgeom!=0) delete fITSgeom;
- fITSgeom = new AliITSgeom();
- if(fGeomDetIn) fITSgeom->ReadNewFile(fRead);
- if(!fGeomDetIn) this->InitAliITSgeom();
- if(fGeomDetOut) fITSgeom->WriteNewFile(fWrite);
+ if(GetITSgeom()!=0) SetITSgeom(0x0);
+ AliITSgeom* geom = new AliITSgeom();
+ SetITSgeom(geom);
+ if(fGeomDetIn) GetITSgeom()->ReadNewFile(fRead);
+ else this->InitAliITSgeom();
+ if(fGeomDetOut) GetITSgeom()->WriteNewFile(fWrite);
AliITS::Init();
//
- for(i=0;i<72;i++) cout << "*";
- cout << endl;
fIDMother = gMC->VolId("ITSV"); // ITS Mother Volume ID.
}
//______________________________________________________________________
// none.
// Return:
// none.
- const Float_t kconv = 1.0e+04; // convert cm to microns
- cout << "AliITSvPPRasymmFMD::SetDefaults" << endl;
+ const Float_t kconv = 1.0e+04; // convert cm to microns
+ AliInfo("Called");
- AliITSDetType *iDetType;
+ if(!fDetTypeSim) fDetTypeSim = new AliITSDetTypeSim();
+ fDetTypeSim->SetITSgeom(GetITSgeom());
+
AliITSgeomSPD *s0;
AliITSgeomSDD *s1;
AliITSgeomSSD *s2;
Int_t i;
Float_t bx[256],bz[280];
-
+
+
+ fDetTypeSim->SetDefaults();
+
//SPD
- iDetType=DetType(kSPD);
- s0 = (AliITSgeomSPD*) fITSgeom->GetShape(kSPD);// Get shape info. Do it this way for now.
- AliITSresponse *resp0=new AliITSresponseSPD();
- SetResponseModel(kSPD,resp0);
- AliITSsegmentationSPD *seg0=new AliITSsegmentationSPD(fITSgeom);
+ s0 = (AliITSgeomSPD*) GetITSgeom()->GetShape(kSPD);// Get shape info. Do it this way for now.
+ //AliITSCalibrationSPD* resp0=new AliITSCalibrationSPD();
+
+ //AliITSsegmentationSPD *seg0=new AliITSsegmentationSPD(GetITSgeom());
+
+ AliITSsegmentationSPD* seg0 = (AliITSsegmentationSPD*)fDetTypeSim->GetSegmentationModel(0);
seg0->SetDetSize(s0->GetDx()*2.*kconv, // base this on AliITSgeomSPD
s0->GetDz()*2.*kconv, // for now.
s0->GetDy()*2.*kconv); // x,z,y full width in microns.
seg0->SetBinSize(bx,bz); // Based on AliITSgeomSPD for now.
SetSegmentationModel(kSPD,seg0);
// set digit and raw cluster classes to be used
- const char *kData0=(iDetType->GetResponseModel())->DataType();
- if (strstr(kData0,"real")) iDetType->ClassNames("AliITSdigit",
- "AliITSRawClusterSPD");
- else iDetType->ClassNames("AliITSdigitSPD","AliITSRawClusterSPD");
-// SetSimulationModel(kSPD,new AliITSsimulationSPD(seg0,resp0));
-// iDetType->ReconstructionModel(new AliITSClusterFinderSPD());
-
+ const char *kData0=(fDetTypeSim->GetCalibrationModel(GetITSgeom()->GetStartSPD()))->DataType();
+ if (strstr(kData0,"real")) fDetTypeSim->SetDigitClassName(kSPD,"AliITSdigit");
+ else fDetTypeSim->SetDigitClassName(kSPD,"AliITSdigitSPD");
// SDD
- iDetType=DetType(kSDD);
- s1 = (AliITSgeomSDD*) fITSgeom->GetShape(kSDD);// Get shape info. Do it this way for now.
- AliITSresponseSDD *resp1=new AliITSresponseSDD("simulated");
- SetResponseModel(kSDD,resp1);
- AliITSsegmentationSDD *seg1=new AliITSsegmentationSDD(fITSgeom,resp1);
+ s1 = (AliITSgeomSDD*) GetITSgeom()->GetShape(kSDD);// Get shape info. Do it this way for now.
+
+ //AliITSCalibrationSDD* resp1=new AliITSCalibrationSDD("simulated");
+
+ //AliITSsegmentationSDD *seg1=new AliITSsegmentationSDD(GetITSgeom(),resp1);
+
+ AliITSsegmentationSDD* seg1 = (AliITSsegmentationSDD*)fDetTypeSim->GetSegmentationModel(1);
seg1->SetDetSize(s1->GetDx()*kconv, // base this on AliITSgeomSDD
s1->GetDz()*2.*kconv, // for now.
s1->GetDy()*2.*kconv); // x,z,y full width in microns.
seg1->SetNPads(256,256);// Use AliITSgeomSDD for now
SetSegmentationModel(kSDD,seg1);
- const char *kData1=(iDetType->GetResponseModel())->DataType();
- const char *kopt=iDetType->GetResponseModel()->ZeroSuppOption();
+ const char *kData1=(fDetTypeSim->GetCalibrationModel(GetITSgeom()->GetStartSDD()))->DataType();
+ AliITSCalibrationSDD* rsp = (AliITSCalibrationSDD*)fDetTypeSim->GetCalibrationModel(GetITSgeom()->GetStartSDD());
+ const char *kopt=rsp->GetZeroSuppOption();
if((!strstr(kopt,"2D")) && (!strstr(kopt,"1D")) || strstr(kData1,"real") ){
- iDetType->ClassNames("AliITSdigit","AliITSRawClusterSDD");
- } else iDetType->ClassNames("AliITSdigitSDD","AliITSRawClusterSDD");
-// SetSimulationModel(kSDD,new AliITSsimulationSDD(seg1,resp1));
-// iDetType->ReconstructionModel(new AliITSClusterFinderSDD());
-
+ fDetTypeSim->SetDigitClassName(kSDD,"AliITSdigit");
+ } else fDetTypeSim->SetDigitClassName(kSDD,"AliITSdigitSDD");
// SSD Layer 5
- iDetType=DetType(kSSD);
- s2 = (AliITSgeomSSD*) fITSgeom->GetShape(kSSD);// Get shape info. Do it this way for now.
- AliITSresponse *resp2=new AliITSresponseSSD("simulated");
- SetResponseModel(kSSD,resp2);
- AliITSsegmentationSSD *seg2=new AliITSsegmentationSSD(fITSgeom);
+
+ s2 = (AliITSgeomSSD*) GetITSgeom()->GetShape(kSSD);// Get shape info. Do it this way for now.
+
+
+ //SetCalibrationModel(GetITSgeom()->GetStartSSD(),new AliITSCalibrationSSD("simulated"));
+
+ //AliITSsegmentationSSD *seg2=new AliITSsegmentationSSD(GetITSgeom());
+ AliITSsegmentationSSD* seg2 = (AliITSsegmentationSSD*)fDetTypeSim->GetSegmentationModel(2);
seg2->SetDetSize(s2->GetDx()*2.*kconv, // base this on AliITSgeomSSD
s2->GetDz()*2.*kconv, // for now.
s2->GetDy()*2.*kconv); // x,z,y full width in microns.
seg2->SetAnglesLay5(0.0075,0.0275); // strip angels rad P and N side.
seg2->SetAnglesLay6(0.0275,0.0075); // strip angels rad P and N side.
SetSegmentationModel(kSSD,seg2);
- const char *kData2=(iDetType->GetResponseModel())->DataType();
- if(strstr(kData2,"real") ) iDetType->ClassNames("AliITSdigit",
- "AliITSRawClusterSSD");
- else iDetType->ClassNames("AliITSdigitSSD","AliITSRawClusterSSD");
-// SetSimulationModel(kSSD,new AliITSsimulationSSD(seg2,resp2));
-// iDetType->ReconstructionModel(new AliITSClusterFinderSSD());
-
- if(kNTYPES>3){
+ const char *kData2=(fDetTypeSim->GetCalibrationModel(GetITSgeom()->GetStartSSD()))->DataType();
+ if(strstr(kData2,"real") ) fDetTypeSim->SetDigitClassName(kSSD,"AliITSdigit");
+ else fDetTypeSim->SetDigitClassName(kSSD,"AliITSdigitSSD");
+ if(fgkNTYPES>3){
Warning("SetDefaults",
"Only the four basic detector types are initialised!");
}// end if
+
+
return;
}
//______________________________________________________________________
-void AliITSvPPRasymmFMD::DrawModule(){
+void AliITSvPPRasymmFMD::DrawModule() const{
// Draw a shaded view of the FMD version 10.
// Inputs:
// none.
// none.
// Return:
// none.
+
Int_t copy, id;
TLorentzVector position, momentum;
static TLorentzVector position0;
static Int_t stat0=0;
- if((id=gMC->CurrentVolID(copy) == fIDMother)&&
- (gMC->IsTrackEntering()||gMC->IsTrackExiting())){
+
+ if(!(this->IsActive())){
+ return;
+ } // end if !Active volume.
+
+ if(!(gMC->TrackCharge())) return;
+
+ id=gMC->CurrentVolID(copy);
+
+ Bool_t sensvol = kFALSE;
+ for(Int_t kk=0;kk<6;kk++)if(id == fIdSens[kk])sensvol=kTRUE;
+ if(sensvol && (gMC->IsTrackExiting())){
copy = fTrackReferences->GetEntriesFast();
TClonesArray &lTR = *fTrackReferences;
// Fill TrackReference structure with this new TrackReference.
- new(lTR[copy]) AliTrackReference(gAlice->GetCurrentTrackNumber());
+ new(lTR[copy]) AliTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber());
} // if Outer ITS mother Volume
- if(!(this->IsActive())){
- return;
- } // end if !Active volume.
+
+
Int_t copy1,copy2;
Int_t vol[5];
TClonesArray &lhits = *fHits;
return;
} // end if IsEntering
// Fill hit structure with this new hit.
- new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->GetCurrentTrackNumber(),vol,
+
+ new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->GetMCApp()->GetCurrentTrackNumber(),vol,
gMC->Edep(),gMC->TrackTime(),position,
position0,momentum);
- //
+
position0 = position;
stat0 = vol[3];
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff